1 2012-05-17 James Lemke <jwlemke@codesourcery.com>
3 * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
5 2012-05-17 James Lemke <jwlemke@codesourcery.com>
7 * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
9 2012-05-17 Daniel Richard G. <skunk@iskunk.org>
10 Nick Clifton <nickc@redhat.com>
13 * configure.in: Add check that sysdep.h has been included before
14 any system header files.
15 * configure: Regenerate.
16 * config.in: Regenerate.
17 * sysdep.h: Generate an error if included before config.h.
18 * alpha-opc.c: Include sysdep.h before any other header file.
19 * alpha-dis.c: Likewise.
20 * avr-dis.c: Likewise.
21 * cgen-opc.c: Likewise.
22 * cr16-dis.c: Likewise.
23 * cris-dis.c: Likewise.
24 * crx-dis.c: Likewise.
25 * d10v-dis.c: Likewise.
26 * d10v-opc.c: Likewise.
27 * d30v-dis.c: Likewise.
28 * d30v-opc.c: Likewise.
29 * h8500-dis.c: Likewise.
30 * i370-dis.c: Likewise.
31 * i370-opc.c: Likewise.
32 * m10200-dis.c: Likewise.
33 * m10300-dis.c: Likewise.
34 * micromips-opc.c: Likewise.
35 * mips-opc.c: Likewise.
36 * mips61-opc.c: Likewise.
37 * moxie-dis.c: Likewise.
38 * or32-opc.c: Likewise.
40 * ppc-dis.c: Likewise.
41 * ppc-opc.c: Likewise.
42 * s390-dis.c: Likewise.
44 * sh64-dis.c: Likewise.
45 * sparc-dis.c: Likewise.
46 * sparc-opc.c: Likewise.
47 * spu-dis.c: Likewise.
48 * tic30-dis.c: Likewise.
49 * tic54x-dis.c: Likewise.
50 * tic80-dis.c: Likewise.
51 * tic80-opc.c: Likewise.
52 * tilegx-dis.c: Likewise.
53 * tilepro-dis.c: Likewise.
54 * v850-dis.c: Likewise.
55 * v850-opc.c: Likewise.
56 * vax-dis.c: Likewise.
57 * w65-dis.c: Likewise.
58 * xgate-dis.c: Likewise.
59 * xtensa-dis.c: Likewise.
60 * rl78-decode.opc: Likewise.
61 * rl78-decode.c: Regenerate.
62 * rx-decode.opc: Likewise.
63 * rx-decode.c: Regenerate.
65 2012-05-17 Alan Modra <amodra@gmail.com>
67 * ppc_dis.c: Don't include elf/ppc.h.
69 2012-05-16 Meador Inge <meadori@codesourcery.com>
71 * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
74 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
75 Stephane Carrez <stcarrez@nerim.fr>
77 * configure.in: Add S12X and XGATE co-processor support to m68hc11
79 * disassemble.c: Likewise.
80 * configure: Regenerate.
81 * m68hc11-dis.c: Make objdump output more consistent, use hex
82 instead of decimal and use 0x prefix for hex.
83 * m68hc11-opc.c: Add S12X and XGATE opcodes.
85 2012-05-14 James Lemke <jwlemke@codesourcery.com>
87 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
88 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
89 (vle_opcd_indices): New array.
90 (lookup_vle): New function.
91 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
92 (print_insn_powerpc): Likewise.
93 * ppc-opc.c: Likewise.
95 2012-05-14 Catherine Moore <clm@codesourcery.com>
96 Maciej W. Rozycki <macro@codesourcery.com>
97 Rhonda Wittels <rhonda@codesourcery.com>
98 Nathan Froyd <froydnj@codesourcery.com>
100 * ppc-opc.c (insert_arx, extract_arx): New functions.
101 (insert_ary, extract_ary): New functions.
102 (insert_li20, extract_li20): New functions.
103 (insert_rx, extract_rx): New functions.
104 (insert_ry, extract_ry): New functions.
105 (insert_sci8, extract_sci8): New functions.
106 (insert_sci8n, extract_sci8n): New functions.
107 (insert_sd4h, extract_sd4h): New functions.
108 (insert_sd4w, extract_sd4w): New functions.
109 (insert_vlesi, extract_vlesi): New functions.
110 (insert_vlensi, extract_vlensi): New functions.
111 (insert_vleui, extract_vleui): New functions.
112 (insert_vleil, extract_vleil): New functions.
113 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
114 (BI16, BI32, BO32, B8): New.
115 (B15, B24, CRD32, CRS): New.
116 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
117 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
118 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
119 (SH6_MASK): Use PPC_OPSHIFT_INV.
120 (SI8, UI5, OIMM5, UI7, BO16): New.
121 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
122 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
124 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
125 (OPVUP, OPVUP_MASK OPVUP): New
126 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
127 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
128 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
129 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
130 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
131 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
132 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
133 (SE_IM5, SE_IM5_MASK): New.
134 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
135 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
136 (BO32DNZ, BO32DZ): New.
137 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
139 (powerpc_opcodes): Add new VLE instructions. Update existing
140 instruction to include PPCVLE if supported.
141 * ppc-dis.c (ppc_opts): Add vle entry.
142 (get_powerpc_dialect): New function.
143 (powerpc_init_dialect): VLE support.
144 (print_insn_big_powerpc): Call get_powerpc_dialect.
145 (print_insn_little_powerpc): Likewise.
146 (operand_value_powerpc): Handle negative shift counts.
147 (print_insn_powerpc): Handle 2-byte instruction lengths.
149 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
152 * configure.in: Invoke ACX_HEADER_STRING.
153 * configure: Regenerate.
154 * config.in: Regenerate.
155 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
156 string.h and strings.h.
158 2012-05-11 Nick Clifton <nickc@redhat.com>
161 * arm-dis.c (print_insn): Fix detection of instruction mode in
162 files containing multiple executable sections.
164 2012-05-03 Sean Keys <skeys@ipdatasys.com>
166 * Makefile.in, configure: regenerate
167 * disassemble.c (disassembler): Recognize ARCH_XGATE.
168 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
170 * configure.in: Recognize xgate.
171 * xgate-dis.c, xgate-opc.c: New files for support of xgate
172 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
173 and opcode generation for xgate.
175 2012-04-30 DJ Delorie <dj@redhat.com>
177 * rx-decode.opc (MOV): Do not sign-extend immediates which are
178 already the maximum bit size.
179 * rx-decode.c: Regenerate.
181 2012-04-27 David S. Miller <davem@davemloft.net>
183 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
184 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
186 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
187 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
189 * sparc-opc.c (CBCOND): New define.
190 (CBCOND_XCC): Likewise.
191 (cbcond): New helper macro.
192 (sparc_opcodes): Add compare-and-branch instructions.
194 * sparc-dis.c (print_insn_sparc): Handle ')'.
195 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
197 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
198 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
200 2012-04-12 David S. Miller <davem@davemloft.net>
202 * sparc-dis.c (X_DISP10): Define.
203 (print_insn_sparc): Handle '='.
205 2012-04-01 Mike Frysinger <vapier@gentoo.org>
207 * bfin-dis.c (fmtconst): Replace decimal handling with a single
208 sprintf call and the '*' field width.
210 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
212 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
214 2012-03-16 Alan Modra <amodra@gmail.com>
216 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
217 (powerpc_opcd_indices): Bump array size.
218 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
219 corresponding to unused opcodes to following entry.
220 (lookup_powerpc): New function, extracted and optimised from..
221 (print_insn_powerpc): ..here.
223 2012-03-15 Alan Modra <amodra@gmail.com>
224 James Lemke <jwlemke@codesourcery.com>
226 * disassemble.c (disassemble_init_for_target): Handle ppc init.
227 * ppc-dis.c (private): New var.
228 (powerpc_init_dialect): Don't return calloc failure, instead use
230 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
231 (powerpc_opcd_indices): New array.
232 (disassemble_init_powerpc): New function.
233 (print_insn_big_powerpc): Don't init dialect here.
234 (print_insn_little_powerpc): Likewise.
235 (print_insn_powerpc): Start search using powerpc_opcd_indices.
237 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
239 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
240 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
241 (PPCVEC2, PPCTMR, E6500): New short names.
242 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
243 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
244 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
245 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
246 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
247 optional operands on sync instruction for E6500 target.
249 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
251 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
253 2012-02-27 Alan Modra <amodra@gmail.com>
255 * mt-dis.c: Regenerate.
257 2012-02-27 Alan Modra <amodra@gmail.com>
259 * v850-opc.c (extract_v8): Rearrange to make it obvious this
260 is the inverse of corresponding insert function.
261 (extract_d22, extract_u9, extract_r4): Likewise.
262 (extract_d9): Correct sign extension.
263 (extract_d16_15): Don't assume "long" is 32 bits, and don't
264 rely on implementation defined behaviour for shift right of
266 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
267 (extract_d23): Likewise, and correct mask.
269 2012-02-27 Alan Modra <amodra@gmail.com>
271 * crx-dis.c (print_arg): Mask constant to 32 bits.
272 * crx-opc.c (cst4_map): Use int array.
274 2012-02-27 Alan Modra <amodra@gmail.com>
276 * arc-dis.c (BITS): Don't use shifts to mask off bits.
277 (FIELDD): Sign extend with xor,sub.
279 2012-02-25 Walter Lee <walt@tilera.com>
281 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
282 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
283 TILEPRO_OPC_LW_TLS_SN.
285 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
287 * i386-opc.h (HLEPrefixNone): New.
288 (HLEPrefixLock): Likewise.
289 (HLEPrefixAny): Likewise.
290 (HLEPrefixRelease): Likewise.
292 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
294 * i386-dis.c (HLE_Fixup1): New.
295 (HLE_Fixup2): Likewise.
296 (HLE_Fixup3): Likewise.
303 (MOD_C6_REG_7): Likewise.
304 (MOD_C7_REG_7): Likewise.
305 (RM_C6_REG_7): Likewise.
306 (RM_C7_REG_7): Likewise.
307 (XACQUIRE_PREFIX): Likewise.
308 (XRELEASE_PREFIX): Likewise.
309 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
310 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
311 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
312 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
313 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
314 MOD_C6_REG_7 and MOD_C7_REG_7.
315 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
316 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
318 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
319 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
321 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
323 (cpu_flags): Add CpuHLE and CpuRTM.
324 (opcode_modifiers): Add HLEPrefixOk.
326 * i386-opc.h (CpuHLE): New.
328 (HLEPrefixOk): Likewise.
329 (i386_cpu_flags): Add cpuhle and cpurtm.
330 (i386_opcode_modifier): Add hleprefixok.
332 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
333 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
334 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
335 operand. Add xacquire, xrelease, xabort, xbegin, xend and
337 * i386-init.h: Regenerated.
338 * i386-tbl.h: Likewise.
340 2012-01-24 DJ Delorie <dj@redhat.com>
342 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
343 * rl78-decode.c: Regenerate.
345 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
348 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
350 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
352 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
353 register and move them after pmove with PSR/PCSR register.
355 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
357 * i386-dis.c (mod_table): Add vmfunc.
359 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
360 (cpu_flags): CpuVMFUNC.
362 * i386-opc.h (CpuVMFUNC): New.
363 (i386_cpu_flags): Add cpuvmfunc.
365 * i386-opc.tbl: Add vmfunc.
366 * i386-init.h: Regenerated.
367 * i386-tbl.h: Likewise.
369 For older changes see ChangeLog-2011
375 version-control: never