1 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (USE_VEX_W_TABLE): New.
4 (VEX_W_TABLE): Likewise.
6 (vex_w_table): Likewise.
7 (prefix_table): Use VEX_W_XXX.
9 (vex_len_table): Likewise.
10 (mod_table): Likewise.
11 (get_valid_dis386): Handle USE_VEX_W_TABLE.
13 * i386-opc.tbl: Add VexW0 to AVX instructions where the VEX.W bit
15 * i386-tbl.h: Regenerated.
17 2009-12-15 H.J. Lu <hongjiu.lu@intel.com>
19 * i386-opc.h (VEX128): New.
22 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
24 * i386-dis.c (vex_len_table): Reformat.
26 2009-12-14 H.J. Lu <hongjiu.lu@intel.com>
28 * i386-dis.c (MOD_VEX_51): Renamed to ...
31 (mod_table): Likewise.
33 2009-12-14 Nick Clifton <nickc@redhat.com>
36 * arm-dis.c (arm_opcodes): Specify %R in cases where using r15
37 results in unpredictable behaviour.
38 (print_insn_arm): Handle %R.
40 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
42 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
44 (print_insn): Don't set vex.w here.
46 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
48 * i386-dis.c (print_insn): Set vex.w to 0.
50 2009-12-11 Quentin Neill <quentin.neill@amd.com>
52 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
53 to avoid fetching ahead for the immediate bytes when OP_E_memory
54 has already been called. Fix indentation.
56 2009-12-11 Nick Clifton <nickc@redhat.com>
58 * Makefile.in: Regenerate.
59 * configure: Regenerate.
60 * arm-dis.c: Fix shadowed variable warnings.
61 * cgen-opc.c: Likewise.
62 * cr16-dis.c: Likewise.
63 * crx-dis.c: Likewise.
64 * d30v-dis.c: Likewise.
65 * fr30-dis.c: Likewise.
66 * frv-opc.c: Likewise.
67 * h8500-dis.c: Likewise.
68 * i386-dis.c: Likewise.
69 * i960-dis.c: Likewise.
70 * ia64-gen.c: Likewise.
71 * ia64-opc.c: Likewise.
72 * m32c-asm.c: Likewise.
73 * m32c-dis.c: Likewise.
74 * m68k-dis.c: Likewise.
75 * maxq-dis.c: Likewise.
76 * mcore-dis.c: Likewise.
77 * mep-asm.c: Likewise.
78 * microblaze-dis.c: Likewise.
79 * mmix-dis.c: Likewise.
80 * ns32k-dis.c: Likewise.
81 * or32-opc.c: Likewise.
82 * s390-dis.c: Likewise.
83 * sh64-dis.c: Likewise.
84 * spu-dis.c: Likewise.
85 * tic30-dis.c: Likewise.
87 2009-12-09 Nick Clifton <nickc@redhat.com>
90 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
91 post-indexed addressing as unpredictable.
93 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
95 * i386-dis.c (FXSAVE_Fixup): New.
97 (mod_table): Use FXSAVE on fxsave and fxrstor.
99 * i386-opc.tbl: Add fxsave64 and fxrstor64.
100 * i386-tbl.h: Regenerated.
102 2009-12-02 Nick Clifton <nickc@redhat.com>
103 Richard Earnshaw <rearnsha@arm.com>
106 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
109 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
112 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
115 2009-11-17 Quentin Neill <quentin.neill@amd.com>
116 Sebastian Pop <sebastian.pop@amd.com>
118 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
119 decoding the second source operand from the immediate byte.
120 (OP_EX_VexW): Pass an extra integer to identify the second
121 and third source arguments.
123 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
125 * i386-opc.tbl: Add IsLockable to cmpxch16b.
126 * i386-tbl.h: Regenerated.
128 2009-11-19 Nick Clifton <nickc@redhat.com>
131 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
132 decoding Immediaate Offset addressing.
134 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
137 * i386-dis.c (get_vex_imm8): Do not increment codep.
138 Avoid incrementing bytes_before_imm when OP_E_memory
139 has already forwarded the codep pointer.
140 (OP_EX_VexW): Increment codep to skip mod/rm byte.
142 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
144 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
145 (VEX_LEN_XOP_08_A1): Removed.
146 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
148 (vex_len_table): Same.
149 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
150 (cpu_flags): Remove field for CpuCVT16.
151 * i386-opc.h (CpuCVT16): Removed.
152 (i386_cpu_flags): Remove bitfield cpucvt16.
153 (i386-opc.tbl): Remove CVT16 instructions.
154 * i386-init.h: Regenerated.
155 * i386-tbl.h: Regenerated.
157 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
158 Quentin Neill <quentin.neill@amd.com>
160 * i386-dis.c (OP_Vex_2src_1): New.
161 (OP_Vex_2src_2): New.
165 (VEX_LEN_XOP_08_A0): Added.
166 (VEX_LEN_XOP_08_A1): Added.
167 (VEX_LEN_XOP_09_80): Added.
168 (VEX_LEN_XOP_09_81): Added.
169 (xop_table): Added an entry for XOP_08. Handle xop instructions.
170 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
171 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
172 (get_valid_dis386): Handle XOP_08.
174 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
175 (cpu_flags): Add CpuXOP and CpuCVT16.
176 (opcode_modifiers): Add XOP08, Vex2Sources.
177 * i386-opc.h (CpuXOP): Added.
179 (i386_cpu_flags): Add cpuxop and cpucvt16.
181 (Vex2Sources): Added.
182 (i386_opcode_modifier): Add xop08, vex2sources.
183 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
184 * i386-init.h: Regenerated.
185 * i386-tbl.h: Regenerated.
187 2009-11-17 Nick Clifton <nickc@redhat.com>
190 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
191 instruction variants. Add pattern for MRS variant that was being
193 (arm_decode_shift): Place error message in a comment.
194 (print_insn_arm): Note that writing back to the PC is
196 Only print 'p' variants of cmp/cmn/teq/tst instructions if
197 decoding for pre-V6 architectures.
199 2009-11-17 Edward Nevill <edward.nevill@arm.com>
201 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
203 2009-11-14 Doug Evans <dje@sebabeach.org>
205 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
207 * Makefile.in: Regenerate.
209 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
211 * i386-dis.c (OP_E_extended): Removed.
213 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
215 * i386-dis.c (print_insn): Check rex_ignored.
217 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
219 * i386-dis.c (ckprefix): Updated to return 0 if number of
220 prefixes > 14 and record the last position for each prefix.
221 (lock_prefix): Removed.
222 (data_prefix): Likewise.
223 (addr_prefix): Likewise.
224 (repz_prefix): Likewise.
225 (repnz_prefix): Likewise.
226 (last_lock_prefix): New.
227 (last_repz_prefix): Likewise.
228 (last_repnz_prefix): Likewise.
229 (last_data_prefix): Likewise.
230 (last_addr_prefix): Likewise.
231 (last_rex_prefix): Likewise.
232 (last_seg_prefix): Likewise.
233 (MAX_CODE_LENGTH): Likewise.
234 (ADDR16_PREFIX): Likewise.
235 (ADDR32_PREFIX): Likewise.
236 (DATA16_PREFIX): Likewise.
237 (DATA32_PREFIX): Likewise.
238 (REP_PREFIX): Likewise.
239 (seg_prefix): Likewise.
240 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
241 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
242 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
243 (get_valid_dis386): Updated.
245 (OP_Monitor): Likewise.
246 (REP_Fixup): Likewise.
247 (print_insn): Display all prefixes.
248 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
249 (intel_operand_size): Likewise.
250 (OP_E_register): Likewise.
253 (OP_IMREG): Likewise.
257 (CRC32_Fixup): Likewise.
258 (MOVBE_Fixup): Likewise.
259 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
261 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
262 used_prefixes only if it is used.
264 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
266 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
267 or, sbb, sub, xor and xchg with register only operands.
268 * i386-tbl.h: Regenerated.
270 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
272 * i386-gen.c (opcode_modifiers): Add IsLockable.
274 * i386-opc.h (IsLockable): New.
275 (i386_opcode_modifier): Add islockable.
277 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
278 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
280 * i386-tbl.h: Regenerated.
282 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
284 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
285 generic coprocessor instructions for FPA loads and stores.
286 (print_insn_coprocessor): Remove %C support. Display address for
287 PC-relative offsets in %A.
289 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
291 * i386-dis.c (all_prefixes): New.
292 (ckprefix): Set all_prefixes.
293 (print_insn): Print all_prefixes instead of lock_prefix,
294 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
296 2009-11-11 Nick Clifton <nickc@redhat.com>
299 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
300 (print_insn_arm): Extend %s format control code to check for
301 unpredictable addressing modes. Add support for %S format control
302 code which suppresses this check.
303 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
304 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
305 PRE_BIT_SET): New macros.
306 (print_insn_coprocessor): Use the new macros instead of magic
308 (print_arm_address): Likewise.
309 (pirnt_insn_arm): Likewise.
310 (print_insn_thumb32): Likewise.
312 2009-11-11 Nick Clifton <nickc@redhat.com>
314 * po/id.po: Updated Indonesian translation.
316 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
318 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
320 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
322 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
323 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
324 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
326 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
329 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
330 Quentin Neill <quentin.neill@amd.com>
332 * opcodes/i386-dis.c (OP_LWPCB_E): New.
335 (USE_XOP_8F_TABLE): New.
337 (REG_XOP_LWPCB): New.
341 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
342 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
344 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
345 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
346 to access to the vex_table.
350 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
351 (cpu_flags): Add CpuLWP.
352 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
353 * opcodes/i386-opc.h (CpuLWP): New.
354 (i386_cpu_flags): Add bit cpulwp.
358 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
359 * opcodes/i386-opc.tbl (llwpcb): Added.
363 2009-11-04 DJ Delorie <dj@redhat.com>
365 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
366 (mvtcp, mvfcp, opecp): Remove.
367 * rx-decode.c: Regenerate.
368 * rx-dis.c (cpen): Remove.
370 2009-11-03 Doug Evans <dje@sebabeach.org>
372 * m32c-desc.c: Regenerate.
373 * mep-desc.c: Regenerate.
375 2009-11-02 Paul Brook <paul@codesourcery.com>
377 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
378 Add VFPv4 instructions.
380 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
382 * i386-dis.c (OP_VEX_FMA): Removed.
384 (Vex128FMA): Removed.
385 (prefix_table): First source operand of FMA4 insns is decoded
386 with Vex not with VexFMA.
387 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
388 when vex.w is set. Third source operand is decoded with
390 2009-10-27 Alan Modra <amodra@bigpond.net.au>
392 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
393 * Makefile.in: Regenerate.
394 * po/POTFILES.in: Regenerate.
396 2009-10-23 Doug Evans <dje@sebabeach.org>
398 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
399 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
400 * cgen-bitset.c: Update.
401 * fr30-desc.h: Regenerate.
402 * frv-desc.h: Regenerate.
403 * ip2k-desc.h: Regenerate.
404 * iq2000-desc.h: Regenerate.
405 * lm32-desc.h: Regenerate.
406 * m32c-desc.h: Regenerate.
407 * m32c-opc.h: Regenerate.
408 * m32r-desc.h: Regenerate.
409 * mep-desc.h: Regenerate.
410 * mt-desc.h: Regenerate.
411 * openrisc-desc.h: Regenerate.
412 * xc16x-desc.h: Regenerate.
413 * xstormy16-desc.h: Regenerate.
415 2009-10-22 DJ Delorie <dj@redhat.com>
417 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
418 * rx-decode.c: Regenerated.
420 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
423 * i386-dis.c: Document LB, LS and LV macros.
424 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
425 with the 64-bit displacement or immediate operand.
426 (putop): Handle LB, LS and LV macros.
428 2009-10-18 Doug Evans <dje@sebabeach.org>
430 * lm32-opinst.c: Regenerate.
431 * m32c-desc.c: Regenerate.
432 * m32r-opinst.c: Regenerate.
433 * openrisc-ibld.c: Regenerate.
434 * xc16x-desc.c: Regenerate.
435 * xc16x-desc.h: Regenerate.
437 2009-10-17 Doug Evans <dje@sebabeach.org>
439 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
440 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
441 sorted alphabetically.
442 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
443 stamp-* rules are sorted alphabetically.
444 * Makefile.in: Regenerate.
446 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
448 * i386-opc.h: Use enum instead of nested macros.
450 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
452 * i386-dis.c: Simplify enums.
454 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
455 Ineiev <ineiev@gmail.com>
458 * i386-dis.c: Use enum instead of nested macros.
460 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
462 * i386-dis.c (MAX_BYTEMODE): Removed.
464 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
467 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
469 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
471 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
474 2009-10-07 Michael Eager <eager@eagercon.com>
476 * microblaze-dis.c: Add include for microblaze-dis.h,
477 eliminate local extern decls.
478 * microblaze-dis.h: New.
480 2009-10-06 Nick Clifton <nickc@redhat.com>
482 * po/fi.po: Updated Finnish translation.
484 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
486 * opc2c.c: Include "libiberty.h" and <errno.h>.
487 (orig_filename): Constify.
488 (dump_lines): Fix line number directive.
489 (main): Set orig_filename to basename of input file. Use
492 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
493 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
494 instead of $(EXEEXT).
495 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
496 $(LINK_FOR_BUILD). Link with libiberty.
497 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
498 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
499 * Makefile.in: Regenerated.
500 * rx-decode.c: Regenerated.
502 2009-10-03 Paul Reed <paulreed@paddedcell.com>
504 * arm-dis.c (print_insn): Check symtab_size not *symtab.
506 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
508 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
509 * i386-tbl.h: Regenerated.
511 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
513 * ppc-dis.c (ppc_opts): Add "476" entry.
514 * ppc-opc.c (PPC476): Define.
515 (powerpc_opcodes): Update mnemonics where required for 476.
517 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
519 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
520 * ppc-dis.c (ppc_opts): Likewise.
521 Rename "ppca2" to "a2".
523 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
525 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
527 2009-09-29 DJ Delorie <dj@redhat.com>
529 * Makefile.am: Add RX files.
530 * configure.in: Add support for RX target.
531 * disassemble.c: Likewise.
532 * Makefile.in: Regenerate.
533 * configure: Regenerate.
535 * rx-decode.c: New file.
536 * rx-decode.opc: New file.
537 * rx-dis.c: New file.
539 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
541 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
542 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
544 2009-09-25 Michael Eager <eager@eagercon.com>
546 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
547 microblaze_decode_insn): Add declarations.
548 (get_delay_slots_microblaze): Remove.
550 2009-09-25 Martin Thuresson <martint@google.com>
552 Update sources to make arc and arm targets compile cleanly with
554 * arc-dis.c Fix casts.
555 * arc-ext.c: Add casts.
556 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
559 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
561 * i386-gen.c (opcode_modifiers): Remove Vex256.
562 (set_bitfield): Handle XXX=V.
564 * i386-opc.h (Vex): Update comments.
567 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
569 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
570 * i386-tbl.h: Regenerated.
572 2009-09-23 Nick Clifton <nickc@redhat.com>
574 * po/fr.po: Updated French translation.
576 2009-09-21 Ben Elliston <bje@au.ibm.com>
577 Peter Bergner <bergner@vnet.ibm.com>
579 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
580 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
581 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
582 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
584 (ERAT_T): New operand.
585 (XWC_MASK): New mask.
589 2009-09-18 Nick Clifton <nickc@redhat.com>
591 * po/es.po: Updated Spanish translation.
592 * po/vi.po: Updated Vietnamese translation.
594 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
596 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
599 2009-09-14 Nick Clifton <nickc@redhat.com>
601 * po/nl.po: Updated Dutch translation.
603 2009-09-11 Nick Clifton <nickc@redhat.com>
605 * po/opcodes.pot: Updated by the Translation project.
607 2009-09-11 Martin Thuresson <martint@google.com>
609 Updated sources to compile cleanly with -Wc++-compat:
610 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
611 * ldcref.c: Add casts.
612 * ldctor.c: Add casts.
614 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
615 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
616 * ldlang.h (enum statement_enum): Move to top level.
617 * ldmain.c: Add casts.
618 * ldwrite.c: Add casts.
619 * lexsup.c: Add casts. (enum control_enum): Move to top level.
620 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
622 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
624 * s390-dis.c (print_insn_s390): Avoid 'long long'.
626 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
628 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
629 (print_insn_s390): Signextend and shift pcrel operands before printing.
631 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
633 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
634 VEX_LEN_AE_R_X_M_0 in comments.
636 2009-09-08 DJ Delorie <dj@redhat.com>
638 * mep-opc.c: Regenerate.
640 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
642 * z8kgen.c (struct op): Replace unused flavor with id.
643 (opt): Remove extra xorb entry.
644 (func): Use id field as fallback.
645 (sub): Return new string, caller changed.
646 (internal): Allocate end marker. Assign unique id before sorting.
647 (gas): Likewise. Fix loop end condition.
648 * z8k-opc.h: Regenerate.
650 2009-09-08 Alan Modra <amodra@bigpond.net.au>
652 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
654 2009-09-07 Alan Modra <amodra@bigpond.net.au>
656 * z8kgen.c (func): Fix thinko last patch.
658 2009-09-07 Alan Modra <amodra@bigpond.net.au>
660 * z8kgen.c (func): Stabilize qsort of identically named entries.
661 * z8k-opc.h: Regenerate.
663 2009-09-07 Tristan Gingold <gingold@adacore.com>
665 * po/opcodes.pot: Regenerate.
667 2009-09-07 Alan Modra <amodra@bigpond.net.au>
669 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
670 * configure: Regenerate.
671 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
672 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
673 (i386-gen, ia64-gen, z8kgen): ..here.
674 * Makefile.in: Regenerate.
676 2009-09-07 Tristan Gingold <gingold@adacore.com>
678 * z8k-opc.h: Regenerate.
680 2009-09-05 Martin Thuresson <martin@mtme.org>
682 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
683 * m88k-dis.c (m88kdis): Rename variable class to in_class.
684 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
685 Rename argument class to symbol_class.
687 2009-09-04 Jie Zhang <jie.zhang@analog.com>
689 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
690 to the new encoding of DBGA, DBGAH, and DBGAL.
691 (_print_insn_bfin): Likewise.
693 2009-09-03 Jie Zhang <jie.zhang@analog.com>
695 * bfin-dis.c (_print_insn_bfin): Don't declare.
696 (print_insn_bfin): Don't declare.
697 (dregs_pair): Remove.
698 (ignore_bits): Remove.
701 2009-09-03 Jie Zhang <jie.zhang@analog.com>
703 * bfin-dis.c (IS_DREG): Define.
709 (decode_REGMV_0): Check illegal register move instructions.
711 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
713 * Makefile.am (BUILD_LIBINTL): New variable.
714 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
715 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
716 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
717 * Makefile.in: Regenerate.
719 2009-09-01 DJ Delorie <dj@redhat.com>
721 * mep-asm.c: Regenerate.
722 * mep-desc.c: Regenerate.
723 * mep-opc.c: Regenerate.
725 2009-09-01 Tristan Gingold <gingold@adacore.com>
727 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
728 dependencies. Remove unused FORMAT variable.
729 * configure.com: New file to create build.com DCL script for
730 Itanium VMS or Alpha VMS.
732 2009-08-29 Martin Thuresson <martin@mtme.org>
734 * cris-dis.c (bytes_to_skip): Update code to use new name.
735 * i386-dis.c (putop): Update code to use new name.
736 * i386-gen.c (process_i386_opcodes): Update code to use
738 * i386-opc.h (struct template): Rename struct template to
739 insn_template. Update code accordingly.
740 * i386-tbl.h (i386_optab): Update type to use new name.
741 * ia64-dis.c (print_insn_ia64): Rename variable template
743 * tic30-dis.c (struct instruction, get_tic30_instruction):
744 Update code to use new name.
745 * tic54x-dis.c (has_lkaddr, get_insn_size)
746 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
747 Update code to use new name.
748 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
749 Update type to new name.
750 * z8kgen.c (internal, gas): Rename variable new to new_op.
752 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
754 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
755 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
756 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
757 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
758 * Makefile.in: Regenerated.
760 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
762 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
763 [INSTALL_LIBBFD]: ... here, ...
764 [INSTALL_LIBBFD]: ... and empty overrides here.
765 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
766 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
767 * Makefile.in: Regenerate.
768 * configure: Regenerate.
770 2009-08-26 Philippe De Muyter <phdm@macqel.be>
772 * m68k-dis.c (print_insn_arg): Add movecr register names for
773 coldfire v4e families.
775 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
777 * Makefile.am (SUBDIRS): Build '.' before 'po'.
778 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
779 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
780 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
781 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
782 (i386-gen.o): New rule.
783 ($(srcdir)/i386-init.h): Adjust.
784 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
785 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
786 (ia64-gen.o): New rule.
787 (ia64_asmtab_deps): New variable.
788 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
789 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
790 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
792 (s390-opc.tab): Adjust.
793 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
795 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
796 * Makefile.in: Regenerate.
797 * z8kgen.c (gas): Avoid '/*' in comment.
798 * z8k-opc.h (func): Regenerate.
800 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
802 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
803 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
804 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
805 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
807 (LIBOPCODES_CFILES): New variable, adding to
808 TARGET_LIBOPCODES_CFILES also non-target library sources.
809 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
811 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
812 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
813 * Makefile.in: Regenerate.
814 * po/POTFILES.in: Regenerate.
816 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
818 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
819 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
820 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
821 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
822 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
823 is built shared even if it is not to be installed.
824 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
825 (install_libopcodes, uninstall_libopcodes): Remove.
826 (AM_CPPFLAGS): Renamed from ...
827 (INCLUDES): ... this.
828 * Makefile.in: Regenerate.
830 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
831 1.11, foreign, no-dist.
832 (MKDEP, m32c_opc_h): Remove variables.
833 (disassemble.lo): Rewrite using automake-style dependency
834 tracking rules; only list the dependency upon the primary source
835 file, but no included headers.
836 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
837 (i386-gen.o, ia64-gen.o): Remove dependency statements.
838 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
839 ensure all dependency fragments are included in the Makefile.
840 (s390-opc.lo): Depend on s390-opc.tab.
841 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
842 (mkdep section): Remove.
843 * Makefile.in: Regenerate.
844 * po/POTFILES.in: Regenerate.
846 * Makefile.am (install-pdf, install-html): Remove.
847 * Makefile.in: Regenerate.
849 * Makefile.in: Regenerate.
850 * aclocal.m4: Likewise.
851 * config.in: Likewise.
852 * configure: Likewise.
854 2009-08-06 Michael Eager <eager@eagercon.com>
856 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
857 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
858 * Makefile.in: Regenerate.
859 * configure.in: Add bfd_microblaze_arch target.
860 * configure: Regenerate.
861 * disassemble.c: Define ARCH_microblaze, return
862 print_insn_microblaze().
863 * microblaze-dis.c: New MicroBlaze disassembler.
864 * microblaze-opc.h: New MicroBlaze opcode definitions.
865 * microblaze-opcm.h: New MicroBlaze opcode types.
867 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
869 * configure.in: Handle bfd_l1om_arch.
870 * disassemble.c (disassembler): Likewise.
872 * configure: Regenerated.
874 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
875 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
877 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
879 (cpu_flags): Add CpuL1OM.
880 (set_bitfield): Take an argument to set the value field.
881 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
882 (process_i386_opcode_modifier): Updated.
883 (process_i386_operand_type): Likewise.
884 * i386-init.h: Regenerated.
885 * i386-tbl.h: Likewise.
887 * i386-opc.h (CpuL1OM): New.
889 (i386_cpu_flags): Add cpul1om.
891 2009-07-24 Jan Beulich <jbeulich@novell.com>
893 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
895 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
896 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
897 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
898 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
900 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
902 * i386-opc.tbl: Qualify floating point instructions by their
903 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
904 and fsincos to be avilable only on 387. Fix fstsw ax to be
905 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
907 * i386-init.h, i386-tbl.h: Regenerate.
909 2009-07-20 Nick Clifton <nickc@redhat.com>
912 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
913 offset or indexed based addressing mode 3.
915 2009-07-14 Nick Clifton <nickc@redhat.com>
918 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
920 (arm_decode_shift): Catch illegal register based shifts.
921 (print_insn_arm): Properly handle negative register r0
922 post-indexed addressing.
924 2009-07-10 Doug Kwan <dougkwan@google.com>
926 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
927 lower 32 bits of long types to make hexadecimal output consistent
928 on both 32-bit and 64-bit hosts.
930 2009-07-10 Alan Modra <amodra@bigpond.net.au>
932 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
933 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
934 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
935 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
936 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
937 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
938 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
939 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
940 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
941 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
942 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
943 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
945 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
947 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
949 2009-07-07 Nick Clifton <nickc@redhat.com>
952 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
955 2009-07-06 DJ Delorie <dj@redhat.com>
957 * mep-desc.c: Regenerate.
958 * mep-desc.h: Regenerate.
959 * mep-opc.c: Regenerate.
960 * mep-opc.h: Regenerate.
962 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
964 * i386-opc.h (CpuFMA4): Add CpuFMA4.
965 (i386_cpu_flags): New.
966 * i386-gen.c: Add CPU_FMA4_FLAGS.
967 * i386-opc.tbl: Add FMA4 instructions.
968 * i386-tbl.h: Regenerate.
969 * i386-init.h: Regenerate.
970 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
971 (OP_XMM_VexW): Ditto.
973 (VEXI4_Fixup): Ditto.
974 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
975 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
976 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
977 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
978 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
979 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
980 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
981 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
982 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
983 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
984 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
985 (get_vex_imm8): New. handle FMA4.
986 (OP_EX_VexReg): Ditto.
988 2009-06-30 Nick Clifton <nickc@redhat.com>
991 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
992 LFM and SFM instructions as comments,.
993 Improve consistency of formatting for instructions displayed as
994 comments and decimal values displayed with their hexadecimal
998 2009-06-29 Nick Clifton <nickc@redhat.com>
1001 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
1002 boundary between variaant and generic coprocessor instuctions.
1003 (coprocessor): Use it.
1004 Fix architecture version of MCRR and MRRC instructions.
1005 (arm_opcdes): Fix patterns for STRB and STRH instructions.
1006 (print_insn_coprocessor): Check architecture and extension masks.
1007 Print a hexadecimal version of any decimal constant that is
1008 outside of the range of -16 to +32.
1009 (print_arm_address): Add a return value of the offset used in the
1010 adress, if it is worth printing a hexadecimal version of it.
1011 (print_insn_neon): Print a hexadecimal version of any decimal
1012 constant that is outside of the range of -16 to +32.
1013 (print_insn_arm): Likewise.
1014 (print_insn_thumb16): Likewise.
1015 (print_insn_thumb32): Likewise.
1018 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
1019 of an undefined instruction.
1020 (arm_opcodes): Use it.
1021 (thumb_opcod): Use it.
1022 (thumb32_opc): Use it.
1024 2009-06-23 DJ Delorie <dj@redhat.com>
1026 * mep-desc.c: Regenerate.
1027 * mep-desc.h: Regenerate.
1028 * mep-dis.c: Regenerate.
1029 * mep-ibld.c: Regenerate.
1030 * mep-opc.c: Regenerate.
1032 * mep-asm.c: Regenerate.
1033 * mep-opc.c: Regenerate.
1034 * mep-opc.h: Regenerate.
1036 2009-06-22 Nick Clifton <nickc@redhat.com>
1038 * po/fi.po: Updated Finish translation.
1040 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1042 * m32c-asm.c: Regenerate.
1044 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1046 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1047 case label to proper lexical block.
1048 * score7-dis.c (print_insn_score32): Likewise.
1050 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1052 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1053 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1054 * s390-opc.txt (nopr, nop): Use new instruction format.
1056 2009-06-18 Nick Clifton <nickc@redhat.com>
1059 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1060 ARM architecture supports the matched instruction.
1061 (print_insn_arm): Likewise.
1062 (select_arm_features): New function. Fills in the fields of an
1063 arm_feature_set structure based on a given arm machine number.
1064 (print_insn): Initialise an arm_feature_set structure.
1066 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1068 * vax-dis.c (is_function_entry): Return success for synthetic
1070 (is_plt_tail): New function.
1071 (print_insn_vax): Decode PLT entry offset longword.
1073 2009-06-15 Nick Clifton <nickc@redhat.com>
1076 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1080 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1082 2009-06-15 Nick Clifton <nickc@redhat.com>
1085 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1086 the disassembly of data as well as instructions.
1088 2009-06-11 Doug Evans <dje@sebabeach.org>
1090 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1092 2009-06-11 Anthony Green <green@moxielogic.com>
1094 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1095 (moxie_form3_opc_info): Add branch instructions.
1096 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1097 encoded instructions.
1099 2009-06-06 Anthony Green <green@moxielogic.com>
1101 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1102 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1104 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1106 * dep-in.sed: Don't use \n in replacement part of s command.
1107 * Makefile.am (DEP1): LC_ALL for uniq.
1108 * Makefile.in: Regenerate.
1110 2009-06-02 Nick Clifton <nickc@redhat.com>
1112 * po/nl.po: Updated Dutch translation.
1114 2009-06-02 Tristan Gingold <gingold@adacore.com>
1116 * ia64-gen.c (parse_resource_users, print_dependency_table,
1117 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1118 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1119 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1120 insert_completer_entry, print_completer_entry, print_completer_table,
1121 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1123 2009-05-28 DJ Delorie <dj@redhat.com>
1125 * mep-asm.c: Regenerate.
1126 * mep-desc.c: Regenerate.
1128 2009-05-26 DJ Delorie <dj@redhat.com>
1130 * mep-asm.c: Regenerate.
1131 * mep-desc.c: Regenerate.
1132 * mep-desc.h: Regenerate.
1133 * mep-dis.c: Regenerate.
1134 * mep-ibld.c: Regenerate.
1135 * mep-opc.c: Regenerate.
1136 * mep-opc.h: Regenerate.
1138 2009-05-26 Nick Clifton <nickc@redhat.com>
1140 * po/id.po: Updated Indonesian translation.
1141 * po/opcodes.pot: Updated template file.
1143 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1145 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1146 per line with all lines having continuation backslash. Prefix
1147 first line with "A", following lines with "B".
1148 * Makefile.am (DEP): Don't use dep.sed here.
1149 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1150 dep.sed here on dependencies, sort and uniq.
1151 * Makefile.in: Regenerate.
1153 2009-05-25 Tristan Gingold <gingold@adacore.com>
1155 * makefile.vms (OPT): New variable.
1156 (CFLAGS): Update compilation flags.
1158 2009-05-22 DJ Delorie <dj@redhat.com>
1160 * mep-asm.c: Regenerate.
1161 * mep-desc.c: Regenerate.
1162 * mep-desc.h: Regenerate.
1163 * mep-dis.c: Regenerate.
1164 * mep-ibld.c: Regenerate.
1165 * mep-opc.c: Regenerate.
1166 * mep-opc.h: Regenerate.
1168 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1170 * i386-opc.h (Cpusse5): Delete.
1171 (i386_cpu_flags): Delete.
1172 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1173 * i386-opc.tbl: Remove SSE5 instructions.
1174 * i386-tbl.h: Regenerate.
1175 * i386-init.h: Regenerate.
1176 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1177 (print_drex_arg): Delete.
1180 (OP_DREX_ICMP): Delete.
1181 (OP_DREX_FCMP): Delete.
1183 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1185 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1187 * Makefile.am: Run "make dep-am".
1188 * Makefile.in: Regenerate.
1189 * po/POTFILES.in: Regenerate.
1191 2009-05-19 DJ Delorie <dj@redhat.com>
1193 * mep-asm.c: Regenerate.
1194 * mep-opc.c: Regenerate.
1196 2009-04-30 DJ Delorie <dj@redhat.com>
1198 * mep-asm.c: Regenerate.
1199 * mep-desc.c: Regenerate.
1200 * mep-desc.h: Regenerate.
1201 * mep-dis.c: Regenerate.
1202 * mep-ibld.c: Regenerate.
1203 * mep-opc.c: Regenerate.
1204 * mep-opc.h: Regenerate.
1206 2009-04-17 DJ Delorie <dj@redhat.com
1208 * mep-desc.c: Regenerate.
1209 * mep-ibld.c: Regenerate.
1210 * mep-opc.c: Regenerate.
1211 * mep-opc.h: Regenerate.
1213 2009-04-15 Anthony Green <green@moxielogic.com>
1215 * moxie-opc.c, moxie-dis.c: Created.
1216 * Makefile.am: Build the moxie source files.
1217 * configure.in: Add moxie support.
1218 * Makefile.in, configure: Rebuilt.
1219 * disassemble.c (disassembler): Add moxie support.
1220 (ARCH_moxie): Define.
1222 2009-04-15 Jan Beulich <jbeulich@novell.com>
1224 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1226 (pshab, pshaw, pshad, pshaq): Likewise.
1227 * i386-tbl.h: Re-generate.
1229 2009-04-08 DJ Delorie <dj@redhat.com
1231 * mep-asm.c: Regenerate.
1232 * mep-desc.c: Regenerate.
1233 * mep-desc.h: Regenerate.
1234 * mep-dis.c: Regenerate.
1235 * mep-ibld.c: Regenerate.
1236 * mep-opc.c: Regenerate.
1237 * mep-opc.h: Regenerate.
1239 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1241 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1242 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1243 Reorder entries so the extended mnemonics are listed before tlbilx.
1245 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1247 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1249 (print_insn_powerpc): Make sure we only deprecate instructions using
1250 the original dialect and not a modified dialect due to -Many handling.
1251 Move the handling of the condition register and default operands to
1252 the end of the if/else if/else chain.
1253 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1254 instructions from newer processors are listed before older ones.
1255 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1256 that have instructions with conflicting opcodes.
1258 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1260 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1263 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1265 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1267 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1269 * arm-dis.c (print_insn): Also check section matches in backwards
1270 search for mapping symbol.
1272 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1274 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1276 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1278 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1279 * Makefile.am: Run "make dep-am".
1280 * Makefile.in: Regenerate.
1281 * openrisc-opc.c: Regenerate.
1283 2009-03-10 Nick Clifton <nickc@redhat.com>
1285 * po/id.po: Updated Indonesian translation.
1287 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1289 * ppc-dis.c: Include "opintl.h".
1290 (struct ppc_mopt, ppc_opts): New.
1291 (ppc_parse_cpu): New function.
1292 (powerpc_init_dialect): Use it.
1293 (print_ppc_disassembler_options): Dump options from ppc_opts.
1294 Internationalize message.
1296 2009-03-06 Nick Clifton <nickc@redhat.com>
1298 * po/es.po: Updated Spanish translation.
1300 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1303 * configure.in: Test for ld --as-needed support. Link shared
1304 libopcodes against libm.
1305 * configure: Regenerate.
1307 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1309 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1310 instructions from newer processors are listed before older ones.
1312 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1314 * Makefile.am: Run "make dep-am".
1315 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1317 * Makefile.in: Regenerate.
1319 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1321 * score7-dis.c: New file.
1322 * Makefile.am: Add dependencies for score7-dis.c.
1323 * Makefile.in: Regenerate.
1324 * configure.in: Add score7-dis to score files.
1325 * configure: Regenerate.
1326 * score-dis.c: Add support for score7 architecture.
1327 * score-opc.h: Likewise.
1329 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1331 * configure: Regenerate.
1333 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1335 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1337 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1339 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1340 the power7 and the isel instructions.
1341 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1342 (insert_dm, extract_dm): Likewise.
1343 (XB6): Update comment to include XX2 form.
1344 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1345 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1346 (RemoveXX3DM): Delete.
1347 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1348 "mftgpr">: Deprecate for POWER7.
1349 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1350 "frsqrte.">: Deprecate the three operand form and enable the two
1351 operand form for POWER7 and later.
1352 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1353 <"waitsrv", "waitimpl">: Add extended opcodes.
1354 <"ldbrx", "stdbrx">: Enable for POWER7.
1355 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1356 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1357 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1358 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1359 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1360 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1361 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1362 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1363 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1364 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1365 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1366 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1367 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1368 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1369 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1370 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1371 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1372 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1373 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1374 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1375 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1376 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1377 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1378 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1379 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1380 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1381 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1382 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1383 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1384 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1385 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1386 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1387 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1388 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1389 "xxspltw", "xxswapd">: Add VSX opcodes.
1391 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1393 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1394 (operand_types): Remove Vex_Imm4.
1396 * i386-opc.h (Vex_Imm4): Removed.
1398 (i386_operand_type): Remove vex_imm4.
1400 * i386-opc.tbl: Remove Vex_Imm4 comments.
1401 * i386-init.h: Regenerated.
1402 * i386-tbl.h: Likewise.
1404 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1406 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1407 vq{r}shr{u}n.s64 insnstructions.
1409 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1411 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1412 operand to be a float point register (FRT/FRS).
1414 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1416 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1417 dmfc2 and dmtc2 before the architecture-level variants.
1419 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1421 * fr30-opc.c: Regenerate.
1422 * frv-opc.c: Regenerate.
1423 * ip2k-opc.c: Regenerate.
1424 * iq2000-opc.c: Regenerate.
1425 * lm32-opc.c: Regenerate.
1426 * m32c-opc.c: Regenerate.
1427 * m32r-opc.c: Regenerate.
1428 * mep-opc.c: Regenerate.
1429 * mt-opc.c: Regenerate.
1430 * xc16x-opc.c: Regenerate.
1431 * xstormy16-opc.c: Regenerate.
1432 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1435 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1437 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1439 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1441 * ppc-opc.c: Update copyright year.
1442 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1443 ordering for POWER4 and later and use the correct Server ordering.
1445 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1447 AVX Programming Reference (January, 2009)
1448 * i386-dis.c (PREFIX_VEX_3A44): New.
1449 (VEX_LEN_3A44_P_2): Likewise.
1450 (PREFIX_VEX_3A48): Updated.
1451 (VEX_LEN_3A4C_P_2): Likewise.
1452 (prefix_table): Add PREFIX_VEX_3A44.
1453 (vex_table): Likewise.
1454 (vex_len_table): Add VEX_LEN_3A44_P_2.
1456 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1457 * i386-tbl.h: Regenerated.
1459 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1461 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1462 (mips_arch_choices): Add XLR entry.
1463 * mips-opc.c (XLR): Define.
1464 (mips_builtin_opcodes): Add XLR instructions.
1466 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1468 * Makefile.am: Add install-pdf target.
1469 * po/Make-in: Add install-pdf target.
1470 * Makefile.in: Regenerate.
1472 2009-02-02 DJ Delorie <dj@redhat.com>
1474 * mep-asm.c: Regenerate.
1475 * mep-desc.c: Regenerate.
1476 * mep-desc.h: Regenerate.
1477 * mep-dis.c: Regenerate.
1478 * mep-ibld.c: Regenerate.
1479 * mep-opc.c: Regenerate.
1480 * mep-opc.h: Regenerate.
1482 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1484 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1487 2009-01-28 Chao-ying Fu <fu@mips.com>
1489 * mips-opc.c (suxc1): Add the flag of FP_D.
1491 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1493 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1494 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1495 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1496 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1497 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1498 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1499 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1500 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1502 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1504 * configure.in (commonbfdlib): Delete.
1505 (SHARED_LIBADD): Add pic libiberty if such is available.
1506 * configure: Regenerate.
1507 * po/POTFILES.in: Regenerate.
1509 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1511 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1512 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1513 operand form and enable the four operand form for POWER6 and later.
1514 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1515 three operand form for POWER6 and later.
1517 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1519 * bfin-dis.c (OUTS): Use "%s" as format string.
1521 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1523 * i386-gen.c (cpu_flag_init): Remove a white space.
1524 (operand_type_init): Likewise.
1526 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1528 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1529 * i386-tbl.h: Regenerated.
1531 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1533 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1534 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1535 subS, xorS and cmpS.
1537 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1539 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1540 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1541 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1542 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1545 (set_bitfield): Take an argument, lineno. Don't report lineno
1546 on error if it is -1.
1547 (process_i386_cpu_flag): Take an argument, lineno.
1548 (process_i386_opcode_modifier): Likewise.
1549 (process_i386_operand_type): Likewise.
1550 (output_i386_opcode): Likewise.
1551 (opcode_hash_entry): Add lineno.
1552 (process_i386_opcodes): Updated.
1553 (process_i386_registers): Likewise.
1554 (process_i386_initializers): Likewise.
1556 * i386-opc.h (CpuP4): Removed.
1560 (CpuSYSCALL): Likewise.
1562 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1563 cpuclflush and cpusyscall.
1565 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1567 * i386-init.h: Regenerated.
1568 * i386-tbl.h: Likewise.
1570 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1572 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1573 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1574 (cpu_flags): Add CpuRdtscp.
1575 (set_bitfield): Remove CpuSledgehammer check.
1577 * i386-opc.h (CpuRdtscp): New.
1579 (i386_cpu_flags): Add cpurdtscp.
1581 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1582 * i386-init.h: Regenerated.
1583 * i386-tbl.h: Likewise.
1585 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1587 * ppc-opc.c (PPCNONE): Define.
1589 (powerpc_opcodes): Initialize the new "deprecated" field.
1591 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1593 AVX Programming Reference (December, 2008)
1594 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1595 (VEX_LEN_E7_P_2_M_0): Likewise.
1596 (VEX_LEN_2C_P_1): Updated.
1597 (VEX_LEN_E8_P_2): Likewise.
1598 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1599 (mod_table): Likewise.
1601 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1602 * i386-tbl.h: Regenerated.
1604 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1606 * i386-gen.c (process_copyright): Update for 2009.
1608 * i386-init.h: Regenerated.
1609 * i386-tbl.h: Likewise.
1611 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1613 AVX Programming Reference (December, 2008)
1614 * i386-dis.c (OP_VEX_FMA): Removed.
1615 (OP_EX_VexW): Likewise.
1616 (OP_EX_VexImmW): Likewise.
1617 (OP_XMM_VexW): Likewise.
1618 (VEXI4_Fixup): Likewise.
1619 (VPERMIL2_Fixup): Likewise.
1622 (Vex128FMA): Likewise.
1624 (EXdVexW): Likewise.
1625 (EXqVexW): Likewise.
1626 (EXVexImmW): Likewise.
1628 (VPERMIL2): Likewise.
1629 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1630 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1631 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1632 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1633 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1634 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1635 (get_vex_imm8): Likewise.
1636 (OP_EX_VexReg): Likewise.
1637 vpermil2_op): Likewise.
1639 (vex_w_dq_mode): Likewise.
1640 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1641 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1642 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1644 (PREFIX_VEX_38DB): Likewise.
1645 (PREFIX_VEX_3A4A): Likewise.
1646 (PREFIX_VEX_3A60): Likewise.
1647 (PREFIX_VEX_3ADF): Likewise.
1648 (VEX_LEN_3ADF_P_2): Likewise.
1649 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1650 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1651 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1652 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1653 PREFIX_VEX_3896...PREFIX_VEX_389F,
1654 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1655 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1656 (vex_table): Likewise.
1657 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1658 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1659 (putop): Support "%XW".
1660 (intel_operand_size): Handle vex_w_dq_mode.
1662 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1664 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1665 instructions. Add new FMA instructions.
1666 * i386-tbl.h: Regenerated.
1668 2009-01-02 Matthias Klose <doko@ubuntu.com>
1670 * or32-opc.c (or32_print_register, or32_print_immediate,
1671 disassemble_insn): Don't rely on undefined sprintf behaviour.
1673 For older changes see ChangeLog-2008
1679 version-control: never