2 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
6 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
8 * fr30-opc.c: Regenerated.
10 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
12 * fr30-opc.c: Regenerated.
13 * fr30-opc.h: Regenerated.
14 * fr30-dis.c: Regenerated.
15 * fr30-asm.c: Regenerated.
18 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
20 * mips-opc.c (sync.p,sync.l): Swap insn values.
23 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
25 * fr30-opc.c: Regenerate.
27 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
29 * fr30-opc.c: Regenerated.
30 * fr30-opc.h: Regenerated.
33 1998-11-18 Doug Evans <devans@casey.cygnus.com>
35 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
36 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
38 (insert_insn_normal): Fix typo.
39 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
40 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
41 Rewrite ! CGEN_INT_INSN_P case.
42 (extract_insn_normal): Ditto.
43 (extract_1): New arg `pc'. All callers updated.
44 Replace calls to bfd_getb8.
46 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
47 * cgen-opc.in: ... from here.
48 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
49 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
51 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
55 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
57 * fr30-opc.c: Regenerated.
59 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
61 * fr30-opc.c: Regenerated.
62 * fr30-opc.h: Regenerated.
63 * fr30-dis.c: Regenerated.
64 * fr30-asm.c: Regenerated.
66 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
68 * po/opcodes.pot: Regenerated.
69 * fr30-opc.c: Regenerated.
70 * fr30-opc.h: Regenerated.
71 * fr30-dis.c: Regenerated.
72 * fr30-asm.c: Regenerated.
74 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
76 * disassemble.c (disassembler): Add support for FR30 target.
79 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
82 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
83 CGEN_OPERAND_SEM_ONLY.
85 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
87 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
89 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
91 * po/opcodes.pot: Regenerate.
92 * po/POTFILES.in: Regenerate.
93 * fr30-opc.c: Regenerate.
94 * fr30-opc.h: Regenerate.
96 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
98 * m32r-asm.c: Regenerate.
101 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
103 * configure.in: Added case for bfd_fr30_arch.
104 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
105 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
106 (CLEANFILES): Added stamp-fr30.
108 * fr30-asm.c: New file.
109 * fr30-dis.c: New file.
110 * fr30-opc.c: New file.
111 * fr30-opc.h: New file.
112 * po/POTFILES.in: Regenerated
113 * po/opcodes.pot: Regenerated
117 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
119 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
120 to bcl8,bncl8 entries.
121 (macro_insn_table_entries): Add FILL_SLOT attribute
122 to bcl8r,bncl8r entries.
125 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
127 * configure.in: detect cygwin* instead of cygwin32*
128 * configure: regenerate
130 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
132 * mips-opc.c (IS_M): Added.
135 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
137 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
141 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
143 start-sanitize-cygnus
144 * cgen-asm.in (insert_1): New function.
145 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
146 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
147 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
148 * cgen-dis.in (extract_1): New function.
149 (extract_normal): buf_ctrl renamed to ex_info, update type.
150 Progress on handling of CGEN_INT_INSN_P.
151 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
152 Update handling of CGEN_INT_INSN_P. Handle errors from
153 @arch@_cgen_extract_operand.
154 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
155 (default_print_insn): Renamed from print_insn.
156 Handle ! CGEN_INT_INSN_P.
157 (print_insn_@arch@): Handle error returns from print_insn.
158 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
159 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
160 (@arch@_cgen_lookup_get_insn_operands): Ditto.
162 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
165 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
167 * m10300-opc.c: Allow autoincrement stores using the same register
168 for source and destination operands.
170 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
172 * m10300-opc.c: DSP instrutions which only write to one general
173 register have no restrictions on matching operands.
175 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
178 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
180 * m32r-opc.h,m32r-opc.c: Regenerate.
183 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
185 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
188 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
190 * i386-dis.c (OP_3DNowSuffix): New static function.
193 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
194 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
195 (insn_codep): New static variable.
196 (print_insn_x86): Init insn_codep after prefixes.
197 (grps): Add GRP14 entries for prefetch, prefetchw.
200 From Jeff B Epler <jepler@usgs.gov>
201 * i386-dis.c (Suffix3DNow): New table.
203 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
205 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
207 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
209 * d10v-dis.c (print_operand): If num is nonzero, then
210 add OPERAND_ACC1, not OPERAND_ACC0.
212 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
214 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
217 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
219 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
223 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
225 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
228 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
230 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
232 start-sanitize-nortel-ppc750
233 1998-09-09 Michael Meissner <meissner@cygnus.com>
235 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
238 end-sanitize-nortel-ppc750
239 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
241 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
243 (print_insn_little_arm): Detect Thumb symbols in elf object
246 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
248 * alpha-dis.c (print_insn_alpha): Use the machine type to
249 decide which PALcode set to include.
251 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
253 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
255 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
257 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
258 MSUB and MSUBS instructions.
261 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
263 * mips-opc.c: Insert contents of vu0.h, rather than including it.
265 * Makefile.am: Rebuild dependencies.
269 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
271 * ppc-opc.c (powerpc_operands): Omit parens around additions in
274 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
276 start-sanitize-coldfire
277 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
278 ColdFire, as below for mulsl and mulul.
280 end-sanitize-coldfire
281 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
282 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
283 +, -, and d for ColdFire.
285 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
286 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
287 (extract_mbe): Likewise.
289 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
291 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
293 * m10300-opc.c: First cut at UDF instructions.
295 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
297 * m32r-opc.c: Regenerate (remove semantic descriptions).
299 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
301 * arm-dis.c (print_insn_big_arm): Fix indentation.
302 (print_insn_little_arm): Likewise.
304 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
306 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
308 (print_insn_little_arm): Likewise.
310 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
312 Move all global state data into opcode table struct, and treat
313 opcode table as something that is "opened/closed".
314 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
315 (cgen_asm_init): Delete.
316 (cgen_set_parse_operand_fn): New function.
317 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
318 (cgen_dis_init): Delete.
319 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
320 (cgen_current_{opcode_table_mach,endian}): Delete.
321 start-sanitize-cygnus
322 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
323 * cgen-dis.in (all fns): Ditto.
324 * cgen-opc.in (all fns): Ditto.
326 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
328 start-sanitize-cygnus
329 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
331 * cgen-dis.in (print_normal): Split into two.
332 (print_address): New function.
333 (extract_insn_normal): Clarify insn_value arg.
334 (print_int_insn): Renamed from print_insn.
335 (print_insn): New arg.
336 (print_insn_@arch@): Open opcode table if not already done so.
337 Move reading of insn into print_insn.
340 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
342 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
346 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
348 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
349 accept an accumulator choice.
350 * m32r-opc.c,m32r-opc.h: Regenerate.
353 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
355 * m10300-opc.c: Add entries for "no_match_operands" field in
359 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
361 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
365 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
367 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
370 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
372 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
374 * m10300-opc.c: Add autoincrement memory loads/stores.
378 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
380 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
381 phmsubh respectively.
384 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
386 start-sanitize-cygnus
387 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
389 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
390 @arch_cgen_get_int_operand.
391 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
392 Update call to @arch@_cgen_insert_operand.
393 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
394 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
395 (extract_insn_normal): New arg `pc', callers updated.
396 Update call to @arch@_cgen_extract_operand.
397 (print_insn): Update call to CGEN_EXTRACT_FN.
399 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
402 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
404 * m10300-opc.c: Fix load to sp and store from sp for the am33.
405 Add more multimedia instructions.
407 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
409 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
414 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
416 * mips-opc.c (pref): Enabled for the r5900.
419 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
421 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
423 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
425 (OP_J): Remove unnecessary subtraction when 16-bit displacement
426 will be masked later.
429 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
431 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
434 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
436 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
437 from raw register #s to symbolic names to make debugging easier.
440 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
442 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
444 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
446 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
447 start-sanitize-cygnus
448 * Makefile.am (CGENDIR): Set via configure.
449 (CGEN): New variable.
450 (CGENFILES): object.scm renamed to cos.scm.
451 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
452 (stamp-m32r): Pass prefix to run-cgen.
453 * Makefile.in: Regenerate.
454 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
455 * cgen-dis.in: Ditto.
456 * cgen-opc.in: Ditto.
457 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
458 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
459 * configure: Regenerate.
463 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
465 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
467 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
469 * m10300-opc.c: Reorder more instructions so that we do not
470 accidentally match a mn10300 instruction when we really
471 wanted an am33 instruction.
474 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
476 * m10300-dis.c: Only recognize instructions from the currently
478 * m10300-opc.c: Add field indicating the particular variant of
479 the mn10300 each instruction is available on.
481 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
483 * configure.in: For bfd_vax_arch, build vax-dis.lo.
484 * Makefile.am: Rebuild dependencies.
485 (CFILES): Add vax-dis.c.
486 (ALL_MACHINES): Add vax-dis.lo.
487 * aclocal.m4: Rebuild with current libtool.
488 * configure, Makefile.in: Rebuild.
490 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
492 * vax-dis.c: New file, from work by Pauline Middelink
493 <middelin@polyware.iaf.nl>.
494 * disassemble.c (ARCH_vax): Define if ARCH_all.
495 (disassembler): Add case for ARCH_vax.
496 * makefile.vms: Support compilation on vms/vax.
499 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
501 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
502 the DVP_OPERAND_RELOC_11_S4 relocation.
506 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
508 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
510 (disassemble): Correctly handle FMT_D10 instructions.
512 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
513 am33 shift instructions.
515 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
517 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
518 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
520 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
521 (mn10300_opcodes): Reorder so as to try and select opcodes from
522 the core chip when multiple alternatives exist. Change several
523 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
524 "macbu" instructions. Fix typos in a couple DSP instructions too.
527 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
529 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
530 related to sign extension and the size of ints.
532 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
534 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
535 instructions. Support (sp) addressing mode by expanding it into
539 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
541 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
542 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
543 be used as immediate values.
547 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
549 * m10300-opc.c: Support 4 byte DSP instructions.
552 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
554 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
557 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
559 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
562 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
564 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
567 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
569 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
570 found on the mn10300.
573 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
575 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
578 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
580 * mips-dis.c (print_insn_little_mips): Previously, instruction
581 printing references the symbol table to determine whether the
582 instruction resides in a block regular instructions or mips16
583 instructions. However, when the disassembler gets used in other
584 environments where the symbol table is not present, we no longer
585 rely in the symbol table, rather, use the low bit of the
586 instructions address to guess. There should be no change for usage
587 of the disassembler in host based programse, gdb ,objdump.
588 (print_insn_big_mips): ditto.
589 (print_insn_mips): ditto
591 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
593 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
595 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
598 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
599 operands for the am33.
600 (mn10300_opcodes): Add new instructions from the am33.
602 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
604 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
606 * i386-dis.c (index16): Add '%' to register names. Use ','
609 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
611 * i386-dis.c: Don't print opcode suffix when we can figure out the
612 size (and gas can!) by register operands, or from the default
614 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
616 (dis386, dis386_twobyte, grps): Use new suffix macros.
617 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
618 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
619 order of cmps operands to agree with Intel docs. Correct operand
620 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
621 agree with Intel docs.
622 (print_insn_x86): Print orphan fwait before other prefixes.
623 Return correct byte count for orphan fwait with prefixes. Don't
624 print `bound' operands in reverse order.
625 (ckprefix): Stop accumulating prefixes if we get fwait.
626 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
628 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
630 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
631 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
633 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
635 Fix problems when bfd_vma is wider than long.
636 * i386-dis.c: Make op_address and start_pc unsigned.
637 (set_op): Make parameter unsigned.
638 (print_insn_x86): Cast to bfd_vma when passing a value to
640 * ns32k-dis.c (CORE_ADDR): Don't define.
641 (print_insn_ns32k): Change type of addr to bfd_vma. Use
642 bfd_scan_vma to read back address.
643 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
645 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
646 (NEXTULONG): New definition.
647 (print_insn_m68k): Avoid overflow when computing third argument of
649 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
650 Use disp instead of val to store offset values.
651 (print_indexed): Use base_disp instead of word to store base
652 displacement, to avoid overflow.
653 * m10300-dis.c (disassemble): Cast value to long when computing
654 pc-relative address, to get correct sign extension.
656 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
658 * m32r-opc.c: Regenerate.
660 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
662 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
663 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
665 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
667 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
669 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
671 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
673 (OP_DSreg): Rename from OP_DSSI.
674 (OP_ESreg): Rename from OP_ESDI.
675 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
677 (append_seg): Rename from append_prefix.
678 (ptr_reg): New function.
679 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
681 (PREFIX_ADDR): Rename from PREFIX_ADR.
682 (float_reg): Add non-broken opcodes for people who don't want
685 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
687 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
690 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
692 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
694 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
696 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
697 0; produce error message for shifts of size 32 (or 64 for 64-bit
698 shifts), because the hardware doesn't support them.
701 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
703 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
706 * vu0.h (sqc2): Fix opcode.
708 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
712 start-sanitize-cygnus
713 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
715 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
716 Change pinfo to use WR_HILO.
719 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
721 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
722 LONG_2, LONG_2b formats to use this new operand.
724 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
726 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
728 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
730 * sparc-dis.c (print_insn_sparc): big endian instruction / little
733 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
735 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
736 and SHORT_B3b formats to use Rb instead of Ra.
738 Add FLAG_MUL16 to MUL2XH opcode.
740 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
741 to existing 1.1.1 parallelisation prohibition procedure.
743 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
745 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
746 * cgen-dis.in (extract_normal): Likewise.
747 * m32r-asm.c,m32r-dis.c: Regenerate.
750 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
752 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
756 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
758 * mips-opc.c (multu1): Add two operand variant for the r5900.
761 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
763 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
764 with a shift count of 0.
767 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
769 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
771 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
773 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
774 (_print_insn_mips): Likewise.
775 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
779 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
781 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
782 (cgen_hw_lookup_by_num): New function.
785 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
788 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
790 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
792 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
794 * sparc-dis.c (print_insn_sparc): Always fetch instructions
795 as big-endian on SPARClite.
798 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
800 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
802 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
806 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
808 * d30v-opc.c (pre_defined_register): Remove alias for r0.
811 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
813 * mips-opc.c (break): Added 20-bit single-operand break
814 instruction for R5900 only.
817 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
819 * po/Make-in (install-info): New target.
821 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
823 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
824 * configure: Rebuild.
826 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
828 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
829 variety of ISA2 instructions to set bottom ten bits of trap code.
831 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
833 * Makefile.am (config.status): Add explicit target so that
834 config.status depends upon bfd/configure.in.
835 * Makefile.in: Rebuild.
837 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
839 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
840 instructions to set bottom ten bits of break code.
841 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
842 for above optional argument.
844 start-sanitize-cygnus
845 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
847 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
848 * m32r-opc.h: Regenerate.
851 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
853 * makefile.vms: Run dec c with /nodebug.
855 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
857 * Makefile.in: Rebuilt.
858 * Makefile.am: Regenerated dependencies with mkdep.
860 * opintl.h (_): Define as dgettext.
862 start-sanitize-cygnus
863 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
865 * configure.in: Add support for --enable-cgen-maint.
866 * Makefile.am (M32R_DEPS): New variable.
867 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
868 * aclocal.m4: Regenerate.
869 * Makefile.in: Regenerate.
870 * configure: Regenerate.
872 * Makefile.am (CGENFILES): Add minsn.scm.
875 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
877 * cgen-asm.c: Internationalised.
878 start-sanitize-cygnus
879 * cgen-asm.in: Internationalised.
880 * cgen-opc.in: Internationalised.
882 * m32r-asm.c: Internationalised.
883 * m32r-dis.c: Internationalised.
884 * m32r-opc.c: Internationalised.
886 * aclocal.m4: Regenerated.
887 * configure: Regenerated.
888 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
889 * Makefile.in: Rebuild.
890 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
891 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
893 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
895 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
897 * aclocal.m4, configure: Rebuild with current tools.
899 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
901 * opintl.h: New file - contains internationalisation macros used
902 by source files in this directory.
903 * po/: New subdirectory - contains internationalisation files.
904 * po/Make-in: New file - Makefile constructor.
905 * po/POTFILES.in: New file - list of files in opcodes directory
906 that should be scan for internationalisation macros.
907 * po/opcodes.pot: New file - list of internationisation strings
908 found in files mentioned in po/POTFILES.in.
909 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
910 entry. Add intl directory to include paths.
911 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
912 HAVE_STRCPY, HAVE_LC_MESSAGES
913 * configure.in: Add rule to build Makefile in po subdirectory.
914 * Makefile.in: Rebuilt.
915 * aclocal.m4: Rebuilt.
916 * config.in: Rebuilt.
917 * configure: Rebuilt.
918 * alpha-opc.c: Internationalised.
919 * arc-dis.c: Internationalised.
920 * arc-opc.c: Internationalised.
921 * arm-dis.c: Internationalised.
922 * cgen-asm.c: Internationalised.
923 * d30v-dis.c: Internationalised.
924 * dis-buf.c: Internationalised.
926 * dvp-dis.c: Internationalised.
927 * dvp-opc.c: Internationalised.
929 * h8300-dis.c: Internationalised.
930 * h8500-dis.c: Internationalised.
931 * i386-dis.c: Internationalised.
932 * m10200-dis.c: Internationalised.
933 * m10300-dis.c: Internationalised.
934 * m68k-dis.c: Internationalised.
935 * m88k-dis.c: Internationalised.
936 * mips-dis.c: Internationalised.
937 * ns32k-dis.c: Internationalised.
938 * opintl.h: Internationalised.
939 * ppc-opc.c: Internationalised.
940 * sparc-dis.c: Internationalised.
941 * v850-dis.c: Internationalised.
942 * v850-opc.c: Internationalised.
944 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
946 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
947 (asm_hash_table_entries): New variable.
948 (cgen_asm_init): Free asm_hash_table_entries.
949 (hash_insn_array,hash_insn_list): New functions.
950 (build_asm_hash_table): Use them. Hash macro insns as well.
951 (cgen_asm_lookup_insn): Update.
952 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
953 (dis_hash_table_entries): New variable.
954 (cgen_dis_init): Free dis_hash_table_entries.
955 (hash_insn_array,hash_insn_list): New functions.
956 (build_dis_hash_table): Use them. Hash macro insns as well.
957 (cgen_dis_lookup_insn): Update.
958 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
959 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
960 (cgen_macro_insn_count): New function.
961 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
962 All callers updated. Sanity check result of extract fn.
963 (@arch@_cgen_get_insn_operands): Change result type to void.
964 Delete args insn_value, length. New arg fields. All callers updated.
965 (@arch@_cgen_lookup_get_insn_operands): New function.
966 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
968 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
970 * i386-dis.c (OP_DSSI): Print segment override.
973 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
975 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
979 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
981 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
985 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
987 * vu0.h (vlqd, vlqi): Update per revised specs.
991 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
993 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
994 (vif_operands): Update.
995 (vif_get_unpackloc): Delete.
996 (state_vif_unpackloc{,_star_p}): Delete.
997 (dvp_opcode_init_parse): Update.
998 (vif_unpack_len_value): Avoid divide by zero.
1001 start-sanitize-r5900
1002 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1004 * vu0.h: Specs changed for VCALLMSR bit pattern.
1005 * mips-dis.c: (print_insn_arg) Matching change.
1008 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1010 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1013 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1015 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1016 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1017 * configure.in: Define and substitute WIN32LDFLAGS and
1019 * aclocal.m4: Rebuild with new libtool.
1020 * configure, Makefile.in: Rebuild.
1022 start-sanitize-r5900
1023 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1025 * vu0.h: Corrected bit pattern for VMAXI opcode.
1028 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1030 * m32r-opc.c: Regenerate.
1033 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1035 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1036 (dvp_expand_macro): Implement.
1037 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1038 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1041 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1043 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1044 before trying to copy it.
1045 * Makefile.in: Rebuild.
1047 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1049 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1051 start-sanitize-m32rx
1052 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1054 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1057 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1059 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1060 from an arbitrary valid buffer instead of fetching them on demand
1062 (invalid_float): use bit_extract_simple() instead of bit_extract().
1064 start-sanitize-m32rx
1065 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1067 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1068 * m32r-opc.h: Add extra control registers.
1071 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1073 From H.J. Lu <hjl@gnu.org>:
1074 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1077 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1079 * Branched binutils 2.9.
1081 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1083 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1084 disassembling last 4 bytes of a section.
1086 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1088 Fix some gcc -Wall warnings:
1089 * arc-dis.c (print_insn): Add casts to avoid warnings.
1090 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1091 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1093 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1094 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1095 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1096 (parse_ffstreg, parse_vif_mode): Likewise.
1098 * m10200-dis.c (disassemble): Likewise.
1099 * m10300-dis.c (disassemble): Likewise.
1100 * ns32k-dis.c (print_insn_ns32k): Likewise.
1101 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1102 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1103 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1104 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1105 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1107 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1108 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1109 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1111 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1112 start-sanitize-tic80
1113 * tic80-dis.c (print_one_instruction): Likewise.
1115 * w65-dis.c (print_operand): Likewise.
1116 * z8k-dis.c (fetch_data): Likewise.
1117 * a29k-dis.c: Add return type for find_byte_func_type.
1118 * arc-opc.c: Include <stdio.h>. Remove declarations of
1119 insert_multshift and extract_multshift.
1120 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1122 (extract_value): Fully parenthesize expression.
1124 * dvp-opc.c: Include <ctype.h>.
1125 (print_sdest): Add default case to switch.
1127 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1128 * h8500-opc.h (h8500_table): Fully bracket initializer.
1129 * w65-opc.h (optable): Likewise.
1130 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1131 * i386-dis.c (OP_E): Initialize local variables.
1132 * m10200-dis.c (print_insn_mn10200): Likewise.
1133 * mips-dis.c (print_insn_mips16): Likewise.
1134 * sh-dis.c (print_insn_shx): Likewise.
1135 * v850-dis.c (print_insn_v850): Likewise.
1136 * ns32k-dis.c (print_insn_arg): Declare.
1137 (get_displacement, invalid_float): Declare.
1138 (list_search, sign_extend, flip_bytes): Declare return type.
1139 (get_displacement): Likewise.
1140 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1142 (print_insn_ns32k): Make i unsigned.
1143 (invalid_float): Make static. Declare type of val.
1144 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1145 on each for iteration.
1146 * tic30-dis.c (get_indirect_operand): Likewise.
1147 * z8k-dis.c (print_insn_z8001): Declare return type.
1148 (print_insn_z8002): Likewise.
1149 (unparse_instr): Fix sprintf format strings.
1151 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1153 * mips-opc.c: Add "sync.l" and "sync.p".
1156 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1158 * dvp-opc.c (extract_vif_datalen): Rewrite.
1159 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1161 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1163 * dvp-dis.c (print_insn): Print unpack address in hex.
1164 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1165 Don't skip over '*', just record it.
1166 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1167 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1168 Don't skip over '*', just record it.
1169 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1170 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1171 (vif_opcodes): Likewise.
1172 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1173 (vif_macros,vif_macro_count): New globals.
1174 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1175 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1176 (vif_get_wl_cl): New function.
1177 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1180 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1182 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1183 default m68k variant to recognize.
1185 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1186 (ctrl, cobr, mem, ea): Likewise.
1187 (print_addr): Likewise. Remove cast.
1188 (ea): Cast argument of print_addr to bfd_vma.
1190 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1192 (cgen_parse_unsigned_integer): Likewise.
1193 (cgen_parse_address): Likewise.
1195 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1197 * i960-dis.c (ctrl): Add full braces to structure initialization.
1198 (cobr, mem, reg): Likewise.
1199 (ea): Correct parenthesization in expression.
1201 * cgen-asm.c: Include <ctype.h>.
1202 (build_asm_hash_table): Remove unused local variable i.
1203 (cgen_parse_keyword): Add casts to avoid warnings.
1205 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1206 symbol. Fix indentation.
1207 (print_insn_little_arm): Likewise.
1209 start-sanitize-r5900
1210 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1212 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1216 start-sanitize-m32rx
1217 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1219 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1224 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1226 * dvp-opc.c (vif_operand_datalen_special): New global.
1229 start-sanitize-r5900
1230 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1232 * vu0.h (vcallms): Use 'O' for call target operand.
1233 * mips-dis.c (print_insn_arg): Handle 'O'.
1236 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1238 * configure.in: Use AM_DISABLE_SHARED.
1239 * aclocal.m4, configure: Rebuild with libtool 1.2.
1241 start-sanitize-r5900
1242 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1244 * mips-dis.c: Change '%' to '#' in r5900 support.
1248 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1250 These patches are courtesy of Jonathan Walton and Tony Thompson
1251 (athompso@cambridge.arm.com).
1253 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1256 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1257 both the offset and the label closest to the destination.
1259 start-sanitize-r5900
1260 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1262 * vu0.h: New file with cop2/vu0 instructions.
1263 * mips-opc.c: Include vu0.h.
1264 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1266 (print_insn_mips): Do not emit a tab after an instruction if the
1267 first arg is an instruction completer (&). If the next arg is an
1268 escape character (%), then print the next arg verbatim.
1269 * Makefile.am (mips-opc.lo): Depend on vu0.h
1273 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1275 * dvp-opc.c (vif_opcodes): Add stcycl.
1277 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1279 * dvp-dis.c (print_dma): Change length from 16 to 8.
1282 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1284 * m32r-opc.h: Regenerate.
1287 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1289 * dvp-opc.c (print_dest1): Print dest spec again.
1290 (print_vfreg,print_accdest): Likewise.
1291 (vif_unpack_len): Round result up to word boundary.
1294 start-sanitize-vr4320
1295 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1297 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1299 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1301 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1306 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1308 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1309 (print_insn): Do mask comparison on proper opcode word.
1310 Print unsigned values in hex.
1311 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1312 (parse_bc): Catch missing dest.
1313 (parse_vfreg): Replace atoi call with strtol.
1314 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1315 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1316 (extract_gif_eop): New function.
1317 (gif_operands): Update eop entry.
1318 (VGIFOP,VGIFNREGS): Fix calcs.
1319 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1320 (gif_regs): Add entry for unused 11 case.
1321 (print_gif_regs): Print empty list instead of nothing.
1322 (extract_gif_nloop): Fix value calc.
1323 (print_gif_nloop): Always print value, even if 0.
1324 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1325 (vif_operands): Use them for wl,cl fields.
1326 (state_vif_wl,state_vif_cl): New static locals.
1327 (parse_vif_mode): Handle numeric args.
1328 (vif_unpack_len_value,vif_unpack_len): New functions.
1329 (vif_insn_len): Call vif_unpack_len.
1332 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1334 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1336 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1338 * cgen-asm.in: Move insertion of generated routines to top of file.
1339 (insert_normal): Add prototype. Delete `shift' arg.
1340 * cgen-dis.in: Move insertion of generated routines to top of file.
1341 (extract_normal): Add prototype. Delete `shift' arg.
1342 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1343 (print_keyword): Add prototype. Fix type of `attrs' arg.
1345 start-sanitize-vr4320
1346 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1348 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1349 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1352 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1354 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1355 assume that info->symbols is non-empty.
1357 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1359 * alpha-opc.c (cvtqs) There is no such thing.
1360 (cvttq): Missing most of the /*d variants.
1362 start-sanitize-r5900
1363 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1365 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1367 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1368 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1371 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1373 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1374 delayed branches or jumps.
1377 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1379 * dvp-opc.c (vif_operands): Add unpack[u] support.
1380 (vif_opcodes): Ditto.
1381 (*_vif_imrubits): Renamed from *_vif_imrbits.
1383 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1385 * dvp-dis.c (print_insn): Handle word number.
1386 Handle mips address vs vu address.
1387 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1388 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1389 ({insert,extract}_dma_addr): Fix word ofset.
1390 ({insert,print}_gif_regs): Fix encode/decode.
1393 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1395 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1397 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1398 * tic30-dis.c (print_branch): Likewise.
1400 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1401 * dvp-dis.c (dvp_info_mach_type): New function.
1402 (print_insn_dvp): Call it.
1403 (print_vif): Return length of 4 if mpg or direct insn so following
1404 insns get properly disabled.
1405 (print_gif): Fix word order.
1406 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1407 (gif_operands): Fix word order.
1408 (gif_opcodes): Likewise.
1409 ({insert,extract,print}_gif_regs): Likewise.
1410 (gif_regs): Add new register number/name changes.
1411 (dma_opcodes): Add dmarefe insn.
1414 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1416 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1417 saved_symbol code as it is no longer needed.
1419 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1421 * cgen-asm.c: Include symcat.h.
1422 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1424 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1427 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1429 * dvp-opc.c (extra_dma_flags): Fix typos.
1430 (dma_operands): Fix word numbers.
1431 (dma_opcodes): Likewise.
1432 ({insert,extract}_dma_flags): Likewise.
1435 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1437 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1440 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1442 * dvp-dis.c (print_gif): Complete.
1443 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1444 (state_gif_{nregs,regs,nloop}): New static locals.
1445 (*_gif_*): Complete.
1446 (dvp_opcode_init_{parse,print}): Init gif state locals.
1447 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1448 (vif_insn_len): Handle `unpack'.
1449 ({insert,extract}_dma_flags): Complete.
1452 start-sanitize-r5900
1453 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1455 * mips-opc.c (mula.s): Renamed from multa.s.
1458 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1460 * m32r-opc.[ch]: Regenerate.
1463 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1465 * dvp-opc.c (dma_operands): Rewrite.
1466 (dma_operand_{count,addr}): New globals.
1467 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1468 (insert_dma_addr): Insert value into insn.
1469 (extract_dma_addr): Extract value from insn.
1471 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1473 * dvp-dis.c (print_vu): Handle loi insns.
1474 (print_insn): Likewise.
1475 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1476 (vu_operands): Make LDEST1 a FAKE operand.
1477 (parse_dest1): Allow elided argument.
1478 (print_dest1): Don't print the argument.
1480 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1482 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1483 (print_vfreg): Don't print dest spec.
1484 (parse_accdest): Dest spec is optional.
1485 (print_accdest): Don't print dest spec.
1488 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1490 * Makefile.am (CGENFILES): Update.
1491 * Makefile.in: Regenerate.
1492 * cgen-asm.in (insert_normal): Result is error message now.
1493 Validate value to be inserted.
1494 (insert_insn_normal): Result is error message now.
1495 (@arch@_cgen_assemble_insn): Update.
1496 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1497 arguments. Don't perform validation here.
1498 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1500 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1502 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1503 operand instance list.
1504 * m32r-opc.c: Regenerate.
1506 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1508 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1509 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1511 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1513 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1515 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1517 * configure.in: Get the version number from BFD.
1518 * configure: Rebuild.
1520 From H.J. Lu <hjl@gnu.org>:
1521 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1522 * Makefile.in: Rebuild.
1524 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1526 * m32r-opc.c: Regenerate.
1527 * m32r-opc.h: Regenerate.
1529 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1531 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1532 Ignore ALIAS insns if asked to.
1533 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1534 * m32r-opc.c: Regenerate.
1537 * dvp.opc.c: Nicely format opcode tables.
1538 (vu_operands): New element UFLAGS.
1539 (parse_uflags,print_uflags): New functions.
1540 (vu_upper_opcodes): Add UFLAGS to all insns.
1543 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1545 Fix rac to accept only a0:
1546 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1547 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1548 Introduce OPERAND_GPR.
1549 * d10v-dis.c (print_operand): Likewise.
1551 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1553 * cgen-opc.in: New file.
1554 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1555 * Makefile.am (CGENFILES): Add cgen-opc.in.
1556 * Makefile.in: Regenerate.
1558 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1559 (cgen_hw_lookup): Make result const.
1561 * cgen-dis.in (*): Use PTR instead of void *.
1562 (print_insn): Delete unused vars `i', `syntax'.
1564 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1567 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1569 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1570 (vif_opcodes): Update renamed insns.
1571 * dvp-dis.c (*): Likewise.
1574 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1576 * configure, aclocal.m4: Rebuild with new libtool.
1578 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1580 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1581 instructions use a PC relative branch, not absolute.
1583 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1585 * configure.in: Set libtool_enable_shared rather than
1586 libtool_shared. Remove diversion hack.
1587 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1589 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1591 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1592 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1594 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1596 * tic30-dis.c: New file.
1597 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1598 * configure.in: Handle bfd_tic30_arch.
1599 * Makefile.am: Rebuild dependencies.
1600 (CFILES): Add tic30-dis.c
1601 (ALL_MACHINES): Add tic30-dis.lo.
1602 * configure, Makefile.in: Rebuild.
1604 start-sanitize-m32rx
1605 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1607 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1608 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1609 macwhi-a and macwlo-a instructions.
1613 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1615 * dvp-opc.c, fixed encoding of a bunch of instructions to
1616 be consistent with the asmvu assembler (and inconsistent
1617 with the specification).
1619 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1621 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1622 in the opcode table. The pkemscalf instruction must come first.
1624 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1626 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1629 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1631 * m32r-opc.h (HAVE_CPU_M32R): Define.
1634 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1636 * dvp-dis.c, dvp-opc.c: New files.
1637 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1638 * configure: Regenerate.
1639 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1640 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1641 (mips-dis.lo): Compile with @archdefs@.
1642 * Makefile.in: Regenerate.
1643 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1644 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1647 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1649 * v850-opc.c (insertion routines): If both alignment and size is
1650 wrong then report this.
1652 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1654 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1655 Only recognize instructions for the current target_processor.
1657 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1659 * d10v-dis.c (PC_MASK): Correct value.
1660 (print_operand): If there's a reloc, don't calculate the
1661 address because they could be in different sections.
1663 start-sanitize-cygnus
1664 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1666 * cgen.sh: Rewrite to be like simulator's version.
1667 * Makefile.am (cgen): Update call to cgen.sh.
1668 * Makefile.in: Regenerate
1671 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1673 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1674 instruction after the 4650's "mul" instruction; nobody's using the
1675 4010 these days. If object files someday indicate which processor
1676 variant they're intended for, we can do a better job at this.
1678 start-sanitize-r5900
1679 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1681 * mips-opc.c (c.lt.s): Add r5900 variant.
1685 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1687 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1688 table provided entry size. Use CGEN_INSN_MNEMONIC.
1689 (cgen_parse_keyword): Rewrite.
1690 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1691 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1692 * cgen-opc.c: Clean up pass over `struct foo' usage.
1693 (cgen_keyword_lookup_value): Handle "" entry.
1694 (cgen_keyword_add): Likewise.
1695 start-sanitize-cygnus
1696 * Makefile.am: Add cgen support.
1697 * Makefile.in: Regenerate.
1698 * configure.in: Add cgen support.
1699 * configure: Regenerate.
1700 * aclocal.m4: Regenerate.
1701 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1704 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1706 * mips-opc.c: Add FP_D to s.d instruction flags.
1708 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1710 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1712 start-sanitize-tic80
1713 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1715 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1716 PC relative offset forms before the 15 bit forms. An assembler command
1717 line option now chooses the default.
1720 start-sanitize-r5900
1721 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1723 * mips-opc.c: Add many missing r5900 instructions.
1726 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1728 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1729 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1731 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1733 * configure: Only build libopcodes shared if --enable-shared's value
1734 was `yes', or was set to `*opcodes*'.
1735 * aclocal.m4: Likewise.
1736 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1737 original source of this bit of code. It's not clear what the best fix
1740 start-sanitize-r5900
1741 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1743 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1745 start-sanitize-tic80
1746 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1748 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1749 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1750 offset forms before the 15 bit forms, to default to the long forms.
1753 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1755 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1757 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1759 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1760 symbol if none is present.
1761 (print_insn_big_arm): Prevent examination of stored symbol if
1764 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1766 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1768 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1770 * disassemble.c: Remove disasm_symaddr() function.
1772 * arm-dis.c: Use info->symbol instead of info->flags to determine
1773 if disassmbly should be in Thumb or Arm mode.
1775 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1777 * arm-dis.c: Add support for disassembling Thumb opcodes.
1778 (print_insn_thumb): New function.
1780 * disassemble.c (disasm_symaddr): New function.
1782 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1783 (thumb_opcodes): Table of Thumb opcodes.
1785 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1787 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1789 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1790 and 'v' as operand types.
1792 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1794 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1795 <olivier.carmona@di.epfl.ch>.
1796 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1797 which has a two word opcode with a one word argument.
1799 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1801 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1802 unsigned, not signed.
1803 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1805 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1807 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1808 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1809 (ftrv): Slay the cut-and-paste monster.
1811 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1813 * d10v-dis.c (print_operand):
1814 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1816 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1818 * d10v-opc.c (OPERAND_FLAG): Split into:
1819 (OPERAND_FFLAG, OPERAND_CFLAG) .
1823 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1825 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1826 field for all INSN_MACRO's.
1827 * mips16-opc.c: same
1829 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1831 * mips-opc.c (sync,cache): These are 3900 insns.
1833 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1835 sh-opc.h (sh_table): Remove ftst/nan.
1837 start-sanitize-cygnus
1838 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1840 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1841 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1843 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1847 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1849 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1850 Add tx49 insns and configury.
1853 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1855 * mips-opc.c (ffc, ffs): Fix mask.
1857 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1859 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1862 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1864 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1865 start-sanitize-cygnus
1866 Added VR5400 instructions.
1867 (N5): New cpu-id macro.
1869 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1871 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1873 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1874 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1876 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1878 * v850-dis.c (disassemble): Replace // with /* ... */
1880 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1882 * sparc-opc.c: Add wr & rd for v9a asr's.
1883 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1884 (v9a_asr_reg_names): New variable.
1885 Patch from David Miller <davem@vger.rutgers.edu>.
1887 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1889 * sparc-opc.c (v9notv9a): New insn type.
1890 (IMPDEP): Move to the end to not conflict with edge8 et al.
1891 Patch from David Miller <davem@vger.rutgers.edu>.
1893 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1895 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1897 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1899 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1901 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1903 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1904 of disassemble_info structure to determine if an overlay address
1905 has a matching symbol in low memory.
1907 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1908 new symbol_at_address_func field in disassemble_info structure.
1910 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1912 * v850-opc.c (extract_d22): Use signed arithmatic.
1914 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1916 * mips-opc.c: Three op mult is not an ISA insn.
1918 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1920 * mips-opc.c: Fix formatting.
1922 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1924 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1925 than assuming that char is signed. Explicitly sign extend 16 bit
1926 values, rather than assuming that short is 16 bits.
1927 (OP_sI, OP_J, OP_DIR): Likewise.
1929 start-sanitize-v850e
1930 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1932 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1936 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1938 * v850-opc.c: Fix typo in comment.
1940 * v850-dis.c (disassemble): Add test of processor type when
1941 determining opcodes.
1943 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1945 * configure.in: Use a diversion to set enable_shared before the
1946 arguments are parsed.
1947 * configure: Rebuild.
1949 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1951 * m68k-opc.c (TBL1): Use ! rather than `.
1952 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1954 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1956 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1958 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1960 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1963 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1964 * aclocal.m4: Rebuild with new libtool.
1965 * configure: Rebuild.
1967 start-sanitize-v850e
1968 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1970 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1973 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1975 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1977 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1979 * v850-opc.c (v850_opcodes): Further rearrangements.
1981 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1983 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1985 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1987 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1990 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1992 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1994 * mips16-opc.c: Added mips16 sdbbp.
1997 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1999 * v850-opc.c: Initialise processors field of v850_opcode structure.
2001 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2003 Merge changes from Martin Hunt:
2005 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2007 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2008 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2009 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2011 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2013 * d30v-dis.c (print_insn): First operand of d*i (delayed
2014 branch) instructions is relative.
2016 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2017 (d30v_operand_table): Add IMM6S3 type.
2018 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2020 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2021 and cmp instructions.
2023 * d30v-opc.c: Correct entries for repeat*, and sat*.
2024 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2025 types. Correct several formats.
2027 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2029 * d30v-opc.c (pre_defined_registers): Change control registers.
2031 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2032 SHORT_C2. Manual was incorrect.
2034 * d30v-dis.c (lookup_opcode): Return value now indicates
2035 if an opcode has a short and a long form. Used for deciding
2036 to append a ".s" or ".l".
2037 (print_insn): Append a ".s" to an instruction if it is
2038 the short form and ".l" if it is a long form. Do not append
2039 anything if the instruction has only one possible size.
2041 * d30v-opc.c: Change mulx2h to require an even register.
2042 New form: SHORT_A2; a SHORT_A form that needs an even
2043 register as the first operand.
2045 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2046 instruction was not being disassembled if there were an odd
2047 number of instructions.
2049 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2051 start-sanitize-v850e
2052 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2054 * v850-dis.c (disassemble): Improved display of register lists.
2057 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2059 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2060 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2061 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2062 fandnot1s, fandnot2s.
2064 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2066 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2068 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2070 * cgen-asm.c (cgen_parse_address): New argument resultp.
2071 All callers updated.
2072 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2074 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2076 * mn10200-dis.c (disassemble): PC relative instructions are
2077 relative to the next instruction, not the current instruction.
2079 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2081 * v850-dis.c (disassemble): Only signed extend values that are not
2082 returned by extract functions.
2083 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2085 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2087 * v850-opc.c: Update comments. Remove use of
2088 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2090 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2092 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2094 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2096 * configure: Rebuilt with latest devo autoconf for NT support.
2098 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2100 * v850-dis.c (disassemble): Use curly brace syntax for register
2103 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2104 where r0 is being used as a destination register.
2106 start-sanitize-v850e
2107 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2109 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2112 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2114 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2115 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2116 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2117 Add insns to access SGR and DBR.
2118 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2120 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2122 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2124 start-sanitize-v850e
2125 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2127 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2128 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2131 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2133 * configure (cgen_files): Add support for v850e target.
2134 * configure.in (cgen_files): Add support for v850e target.
2136 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2138 * configure (cgen_files): Add support for v850ea target.
2139 * configure.in (cgen_files): Add support for v850ea target.
2142 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2144 * configure.in (bfd_arc_arch): Add.
2145 * configure: Rebuild.
2146 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2147 * Makefile.in: Rebuild.
2148 * arc-dis.c, arc-opc.c: New files.
2149 * disassemble.c (ARCH_all): Define ARCH_arc.
2150 (disassembler): Add ARC support.
2152 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2154 start-sanitize-v850e
2155 * v850-dis.c (disassemble): Add support for v850EA instructions.
2157 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2158 (v850_opcodes): Add v850EA instructions.
2160 * v850-dis.c (disassemble): Add support for v850E instructions.
2162 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2163 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2164 insert_spe, extract_spe): New Functions.
2165 (v850_opcodes): Add v850E instructions.
2168 * v850-opc.c: Reorganised and re-layed out to improve readability
2171 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * configure: Rebuild with autoconf 2.12.1.
2175 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2177 * aclocal.m4, configure: Rebuild with new automake patches.
2179 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2182 * acinclude.m4: Just include acinclude.m4 from BFD.
2183 * aclocal.m4, configure: Rebuild.
2185 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2187 * Makefile.am: New file, based on old Makefile.in.
2188 * acconfig.h: New file.
2189 * acinclude.m4: New file.
2190 * stamp-h.in: New file.
2191 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2192 Removed shared library handling; now handled by libtool. Replace
2193 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2194 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2195 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2196 handling in AC_OUTPUT.
2197 * dep-in.sed: Change .o to .lo.
2198 * Makefile.in: Now built with automake.
2199 * aclocal.m4: Now built with aclocal.
2200 * config.in, configure: Rebuild.
2202 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2204 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2206 start-sanitize-r5900
2207 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2209 * mips-opc.c: Fix coding of mtsa.
2212 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2214 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2216 * sparc-dis.c (sorted_opcodes): New static local.
2217 (struct opcode_hash): `opcode' is pointer to const element.
2218 (build_hash): First arg is now table of sorted pointers.
2219 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2220 (compare_opcodes): Update.
2222 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2224 * cgen-opc.c: #include <ctype.h>.
2225 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2226 Handle case insensitive hashing.
2227 (hash_keyword_value): Change type of `value' to unsigned int.
2229 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2231 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2232 precision FP, mark it as such. Likewise for double precision
2233 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2235 start-sanitize-r5900
2236 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2239 start-sanitize-r5900
2240 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2242 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2243 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2246 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2248 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2250 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2251 nesting depth when all the macros are expanded.
2253 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * sparc-opc.c: The fcmp v9a instructions take an integer register
2256 as a destination, not a floating point register. From Christian
2257 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2259 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2261 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2262 syntax. From Roman Hodek
2263 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2265 * i386-dis.c (twobyte_has_modrm): Fix pand.
2267 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2269 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2271 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2273 * arm-dis.c: Add prototypes for arm_decode_shift and
2276 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2278 * mips-opc.c: Add r3900 insns.
2280 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2282 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2283 print delay slot instructions on the same line. When using a PC
2284 relative load, add a comment with the value being loaded if it can
2287 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2289 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2290 to pushS/popS for segment regs and byte constant so that
2291 pushw/popw printed when in 16 bit data mode.
2293 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2294 print cbtw, cwtd in 16 bit data mode.
2295 * i386-dis.c (putop): extra case W to support above.
2297 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2298 address size prefix in 16 bit address mode.
2300 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2302 * sh-dis.c: Reindent. Rename local variable fprintf to
2305 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2307 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2309 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2311 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2313 * mips16-opc.c (mip16_opcodes): same.
2315 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2317 * m68k-opc.c (moveb): Change $d to %d.
2319 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2321 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2322 (twobyte_has_modrm): Likewise.
2324 (OP_MMX, OP_EM, OP_MS): New static functions.
2326 * i386-dis.c: Revert patch of April 4. The output now matches
2329 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2331 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2334 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2336 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2338 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2340 * Makefile.in (install): Depend upon installdirs.
2341 (installdirs): New target.
2343 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2345 From Thomas Graichen <graichen@rzpd.de>:
2346 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2347 * configure: Rebuild.
2349 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2351 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2352 Delete string{,s}.h support.
2354 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2356 * cgen-asm.c (cgen_parse_operand_fn): New global.
2357 (cgen_parse_{{,un}signed_integer,address}): Update call to
2358 cgen_parse_operand_fn.
2359 (cgen_init_parse_operand): New function.
2360 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2361 from cgen_asm_init_parse.
2362 (m32r_cgen_assemble_insn): New operand `errmsg'.
2363 Delete call to as_bad, return error message to caller.
2364 (m32r_cgen_asm_hash_keywords): #if 0 out.
2366 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2368 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2370 [case 'J']: Fix typo in register name.
2372 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2374 * configure.in: Substitute SHLIB_LIBS.
2375 * configure: Rebuild.
2376 * Makefile.in (SHLIB_LIBS): New variable.
2377 ($(SHLIB)): Use $(SHLIB_LIBS).
2379 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2381 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2383 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2385 * disassemble.c (disassembler): Handle m32r.
2387 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2389 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2390 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2391 * Makefile.in (CFILES): Add them.
2392 (ALL_MACHINES): Add them.
2393 (dependencies): Regenerate.
2394 * configure.in (cgen_files): New variable.
2395 (bfd_m32r_arch): Add entry.
2396 * configure: Regenerate.
2398 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2401 * configure: Rebuild.
2403 * Makefile.in: Rebuild dependencies.
2405 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2407 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2410 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2412 * Branched binutils 2.8.
2414 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2416 * m10200-dis.c: Rename from mn10200-dis.c.
2417 * m10200-opc.c: Rename from mn10200-opc.c.
2418 * m10300-dis.c: Rename from mn10300-dis.c
2419 * m10300-opc.c: Rename from mn10300-opc.c.
2420 * Makefile.in: Update accordingly.
2422 * mips16-opc.c: Add mul and dmul macros.
2424 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2426 * makefile.vms: Update CFLAGS, add clean target.
2428 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2430 * mips-opc.c: Add "wait". From Ralf Baechle
2431 <ralf@gnu.ai.mit.edu>.
2433 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2434 * configure, config.in: Rebuild.
2435 * sysdep.h: Include <stdlib.h> if it exists.
2436 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2438 * Makefile.in: Rebuild dependencies.
2440 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2442 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2443 Andrew Bray <andy@madhouse.demon.co.uk>.
2445 * mips-opc.c: Add cast when setting mips_opcodes.
2447 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2449 * v850-dis.c (disassemble): Fix sign extension problem.
2450 * v850-opc.c (extract_d*): Fix sign extension problems to make
2451 disassembly calculate branch offsets correctly.
2453 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2455 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2457 * mips-opc.c: Add dctr and dctw.
2459 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2461 * d30v-dis.c (print_insn): Change the way signed constants
2464 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2466 * Makefile.in (BFD_H): New variable.
2467 (HFILES): New variable.
2468 (CFILES): Add all C files.
2469 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2470 Delete old dependencies, and build new ones.
2471 * dep-in.sed: New file.
2473 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2475 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2477 start-sanitize-coldfire
2478 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2480 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2483 end-sanitize-coldfire
2484 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2486 * mn10200-opc.c: Change "trap" to "syscall".
2487 * mn10300-opc.c: Add new "syscall" instruction.
2489 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2491 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2492 mulul insns on the coldfire.
2494 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2496 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2497 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2498 (print_insn_little_arm): Likewise.
2500 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2502 Based on patches from H.J. Lu <hjl@lucon.org>:
2503 * i386-dis.c (fetch_data): Add prototype.
2504 * m68k-dis.c (fetch_data): Add prototype.
2505 (dummy_print_address): Add prototype. Make static.
2506 * ppc-opc.c (valid_bo): Add prototype.
2507 * sparc-dis.c (build_hash_table): Add prototype.
2508 (is_delayed_branch, compute_arch_mask): Add prototypes.
2509 (print_insn_sparc): Make several local variables const.
2510 (compare_opcodes): Change arguments to const PTR. Add prototype.
2511 * sparc-opc.c (arg): Change name field to be const.
2512 (lookup_name, lookup_value): Add prototypes. Change table and
2513 name parameters to be const.
2514 (sparc_encode_asi): Change name parameter to be const.
2515 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2516 (sparc_encode_sparclet_cpreg): Likewise.
2517 (sparc_decode_asi): Change return type to be const.
2518 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2519 (sparc_decode_sparclet_cpreg): Likewise.
2521 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2523 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2524 Solaris doesn't like the combined options, and the -f is
2526 (stamp-tshlink, install): Likewise.
2528 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2530 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2533 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2535 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2537 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2539 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2542 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2544 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2546 start-sanitize-tic80
2547 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2549 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2551 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2553 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2556 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2558 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2559 floatformat_to_double to make portable.
2560 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2563 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2565 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2566 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2568 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2570 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2571 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2573 start-sanitize-tic80
2574 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2576 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2577 (OFF_SL_BR_SCALED): ... to this, and added the flag
2578 TIC80_OPERAND_BASEREL to the flags word.
2579 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2583 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2585 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2586 Change mips_opcodes from const array to a pointer,
2587 and change bfd_mips_num_opcodes from const int to int,
2588 so that we can increase the size of the mips opcodes table
2591 start-sanitize-tic80
2592 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2594 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2595 store BITNUM values in the table in one's complement form
2596 to match behavior when assembler is given a raw numeric
2597 value for a BITNUM operand.
2598 * tic80-dis.c (print_operand_bitnum): Ditto.
2601 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2603 * d30v-opc.c: Removed references to FLAG_X.
2605 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2607 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2609 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2611 * Makefile.in: Added d30v object files.
2612 * configure: (bfd_d30v_arch) Rebuilt.
2613 * configure.in: (bfd_d30v_arch) Added new case.
2614 * d30v-dis.c: New file.
2615 * d30v-opc.c: New file.
2616 * disassemble.c (disassembler) Add entry for d30v.
2618 start-sanitize-tic80
2619 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2621 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2622 representations for the floating point BITNUM values.
2624 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2626 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2627 in the table in one's complement form, as they appear in the
2629 (tic80_symbol_to_value): Use macros to access predefined
2631 (tic80_value_to_symbol): Ditto.
2632 (tic80_next_predefined_symbol): New function.
2633 * tic80-dis.c (print_operand_bitnum): Remove code that did
2634 one's complement for BITNUM values.
2637 start-sanitize-r5900
2638 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2640 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2643 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2645 * makefile.vms: Remove 8 bit characters. Update to latest
2648 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2650 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2652 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2654 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2655 (IMM24_PCREL): Likewise.
2657 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2659 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2660 address for an extended PC relative instruction that is not a
2663 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2665 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2668 start-sanitize-tic80
2669 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2671 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2672 (tic80_opcodes): Sort entries so that long immediate forms
2673 come after short immediate forms, making it easier for
2674 assembler to select the right one for a given operand.
2677 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2679 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2681 (print_insn_mips16): Likewise.
2683 start-sanitize-r5900
2684 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2686 * mips-opc.c: add r5900.
2689 start-sanitize-tic80
2690 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2692 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2693 a symbol class that restricts translation to just that
2694 class (general register, condition code, etc).
2696 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2698 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2699 and REG_DEST_E for register operands that have to be
2700 an even numbered register. Add REG_FPA for operands that
2701 are one of the floating point accumulator registers.
2702 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2703 (tic80_opcodes): Change entries that need even numbered
2704 register operands to use the new operand table entries.
2705 Add "or" entries that are identical to "or.tt" entries.
2708 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2710 * mips16-opc.c: Add new cases of exit instruction for
2712 * mips-dis.c (print_mips16_insn_arg): Display floating point
2713 registers in operands of exit instruction. Print `$' before
2714 register names in operands of entry and exit instructions.
2716 start-sanitize-tic80
2717 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2719 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2720 pairs for all predefined symbols recognized by the assembler.
2721 Also used by the disassembling routines.
2722 (tic80_symbol_to_value): New function.
2723 (tic80_value_to_symbol): New function.
2724 * tic80-dis.c (print_operand_control_register,
2725 print_operand_condition_code, print_operand_bitnum):
2726 Remove private tables and use tic80_value_to_symbol function.
2729 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2731 * d10v-dis.c (print_operand): Change address printing
2732 to correctly handle PC wrapping. Fixes PR11490.
2734 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2736 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2739 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2741 * mips-dis.c (print_insn_mips16): Set insn_info information.
2742 (print_mips16_insn_arg): Likewise.
2744 * mips-dis.c (print_insn_mips16): Better handling of an extend
2745 opcode followed by an instruction which can not be extended.
2747 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2749 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2750 coldfire moveb instruction to not allow an address register as
2751 destination. Although the documentation does not indicate that
2752 this is invalid, experiments uncovered unexpected behavior.
2753 Added a comment explaining the situation. Thanks to Andreas
2754 Schwab for pointing this out to me.
2756 start-sanitize-tic80
2757 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2759 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2760 entries are presorted so that entries with the same mnemonic are
2761 adjacent to each other in the table. Sort the entries for each
2762 instruction so that this is true.
2765 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2767 * m68k-dis.c: Include <libiberty.h>.
2768 (print_insn_m68k): Sort the opcode table on the most significant
2769 nibble of the opcode.
2771 start-sanitize-tic80
2772 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2774 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2775 "vsub", "vst", "xnor", and "xor" instructions.
2776 (V_a1): Renamed from V_a, msb of accumulator reg number.
2777 (V_a0): Add macro, lsb of accumulator reg number.
2779 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2781 * tic80-dis.c (print_insn_tic80): Broke excessively long
2782 function up into several smaller ones and arranged for
2783 the instruction printing function to be callable recursively
2784 to print vector instructions that have both a load and a
2785 math instruction packed into a single opcode.
2786 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2787 to explain why it comes after the other vector opcodes.
2790 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2792 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2793 move insns to handle immediate operands.
2795 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2797 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2798 fix operand mask in the "moveml" entries for the coldfire.
2800 start-sanitize-tic80
2801 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2803 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2804 New macros for building vector instruction opcodes.
2805 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2806 FMT_LI, which were unused. The field is now a flags field.
2807 Remove some opcodes that are possible, but illegal, such
2808 as long immediate instructions with doubles for immediate
2809 values. Add "vadd" and "vld" instructions.
2811 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2813 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2814 the order more logical. Move the shift alias instructions ("rotl",
2815 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2816 interspersed with the regular sr.x and sl.x instructions. Add
2817 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2818 "sub", "subu", "swcr", and "trap".
2820 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2822 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2823 (OFF_SL_PC): Renamed from OFF_SL.
2824 (OFF_SS_BR): New operand type for base relative operand.
2825 (OFF_SL_BR): New operand type for base relative operand.
2826 (REG_BASE): New operand type for base register operand.
2827 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2828 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2829 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2831 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2832 10 char field, padded with spaces on rhs, rather than a string
2833 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2834 than old TIC80_OPERAND_RELATIVE. Add support for new
2835 TIC80_OPERAND_BASEREL flag bit.
2837 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2839 * tic80-dis.c (print_insn_tic80): Print floating point operands
2841 * tic80-opc.c (SPFI): Add single precision floating point
2842 immediate operand type.
2843 (ROTATE): Add rotate operand type for shifts.
2844 (ENDMASK): Add for shifts.
2845 (n): Macro for the 'n' bit.
2846 (i): Macro for the 'i' bit.
2847 (PD): Macro for the 'PD' field.
2848 (P2): Macro for the 'P2' field.
2849 (P1): Macro for the 'P1' field.
2850 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2854 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2856 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2857 adding in current address for pc-relative operands.
2859 start-sanitize-tic80
2860 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2862 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2863 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2864 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2865 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2866 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2867 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2868 (REG_SCALED, LSI_SCALED): New operand types.
2869 (E): New macro for 'E' bit at bit 27.
2870 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2871 opcodes, including the various size flavors (b,h,w,d) for
2872 the direct load and store instructions.
2874 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2876 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2878 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2879 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2880 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2881 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2882 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2883 masks with "MASK_* & ~M_*" to get the M bit reset.
2884 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2886 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2888 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2889 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2890 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2892 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2893 CC, SICR, and LICR table entries.
2894 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2895 "bcnd", and "brcr" opcodes.
2898 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2900 * ppc-opc.c (powerpc_operands): Make comment match the
2901 actual fields (no shift field).
2902 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2903 start-sanitize-tic80
2904 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2905 partial implementation, work in progress.
2906 * tic80-opc.c (tic80_operands): Begin construction operands table.
2907 (tic80_opcodes): Continue populating opcodes table and start
2908 filling in the operand indices.
2909 (tic80_num_opcodes): Add this.
2912 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2914 * m68k-opc.c: Add #B case for moveq.
2916 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2918 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2919 before they are used.
2921 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2923 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2924 for "breakpoint" instruction.
2926 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2928 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2929 (dep): Use ALL_CFLAGS rather than CFLAGS.
2931 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2933 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2936 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2938 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2939 start-sanitize-tic80
2940 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2943 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2945 * mips16-opc.c: Add "abs".
2947 start-sanitize-tic80
2948 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2950 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2951 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2952 (disassembler): Add bfd_arch_tic80 support to set disassemble
2953 to print_insn_tic80.
2954 * tic80-dis.c (print_insn_tic80): Add stub.
2956 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2958 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2959 * configure: Regenerate with autoconf.
2960 * tic80-dis.c: Add file.
2961 * tic80-opc.c: Add file.
2964 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2966 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2968 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2970 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2971 (mn10200_opcodes): Use it for some logicals and btst insns.
2972 Add "break" and "trap" instructions.
2974 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2976 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2978 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2980 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2981 relative load or add now depends upon whether the instruction is
2984 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2986 * mn10200-dis.c: Finish writing disassembler.
2987 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2988 Fix mask for "jmp (an)".
2990 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2991 handle endianness issues for mn10300.
2993 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2995 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2997 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2998 instruction. Fix opcode field for "movb (imm24),dn".
3000 * mn10200-opc.c (mn10200_operands): Fix insertion position
3003 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3005 * mn10200-opc.c: Create mn10200 opcode table.
3006 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3007 but moving along nicely.
3009 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3011 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3013 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3015 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3016 specifiers for fmovem* instructions.
3018 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3020 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3022 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3024 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3027 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3029 * mn10300-opc.c: Add some comments explaining the various
3032 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3034 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3036 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3039 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3040 operand specifiers in fmovm* instructions.
3042 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3044 * ppc-opc.c (insert_li): Give an error if the offset has the two
3045 least significant bits set.
3047 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3049 * mips-dis.c (print_insn_mips16): Separate the instruction from
3050 the arguments with a tab, not a space.
3052 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3054 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3057 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3060 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3062 * configure: Rebuild with autoconf 2.12.
3064 Add support for mips16 (16 bit MIPS implementation):
3065 * mips16-opc.c: New file.
3066 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3067 (mips16_reg_names): New static array.
3068 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3069 after seeing a 16 bit symbol.
3070 (print_insn_little_mips): Likewise.
3071 (print_insn_mips16): New static function.
3072 (print_mips16_insn_arg): New static function.
3073 * mips-opc.c: Add jalx instruction.
3074 * Makefile.in (mips16-opc.o): New target.
3075 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3076 * configure: Rebuild.
3078 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3080 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3081 operand specifiers in *save, *restore and movem* instructions.
3083 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3086 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3087 register operands for immediate arithmetic, not, neg, negx, and
3088 set according to condition instructions.
3090 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3091 specifier of the effective-address operand in immediate forms of
3092 arithmetic instructions. The specifier for the immediate operand
3093 notes how and where the constant will be stored.
3095 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3097 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3100 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3103 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3105 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3107 * mn10300-dis.c (disassemble): Handle register lists.
3109 * mn10300-opc.c: Fix handling of register list operand for
3110 "call", "ret", and "rets" instructions.
3112 * mn10300-dis.c (disassemble): Print PC-relative and memory
3113 addresses symbolically if possible.
3114 * mn10300-opc.c: Distinguish between absolute memory addresses,
3115 pc-relative offsets & random immediates.
3117 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3119 (disassemble): Handle SPLIT and EXTENDED operands.
3121 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10300-dis.c: Rough cut at printing some operands.
3125 * mn10300-dis.c: Start working on disassembler support.
3126 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3128 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3130 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3132 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3134 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3136 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3138 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3139 register argument is calls and jmp instructions.
3141 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3143 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3144 getx operand. Fix opcode for mulqu imm,dn.
3146 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3148 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3149 in MN10300_OPERAND_SPLIT operands for how many bits
3150 appear in the basic insn word. Add IMM32_HIGH24,
3151 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3152 (mn10300_opcodes): Use new operands as needed.
3154 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3155 for bset, bclr, btst instructions.
3156 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3158 * mn10300-opc.c (mn10300_operands): Remove many redundant
3159 operands. Update opcode table as appropriate.
3160 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3161 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3163 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3165 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3166 operands (for indexed load/stores). Fix bitpos for DI
3167 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3168 few instructions that insert immediates/displacements in the
3169 middle of the instruction. Add IMM8E for 8 bit immediate in
3170 the extended part of an instruction.
3171 (mn10300_operands): Use new opcodes as appropriate.
3173 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3175 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3176 sequential so the assembler never parallelizes it with
3179 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3181 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3182 a data/address register that appears in register field 0
3183 and register field 1.
3184 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3186 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3188 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3189 standard disassembly.
3191 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3192 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3193 Recategorize PALcode instructions.
3195 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3197 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3199 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3201 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3202 there are no operand types.
3204 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3206 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3208 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3210 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3214 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3216 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3217 and sst.w instructions.
3219 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3222 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3224 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3227 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3229 * ppc-opc.c (PPCPWR2): Define.
3230 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3233 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3235 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3236 field for movhu instruction.
3238 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3239 cast value to "long" not "signed long" to keep hpux10
3242 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3244 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3247 * mn10300-opc.c (FMT*): Remove definitions.
3249 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3250 for shift-by-register opcodes.
3252 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3253 into [AD][MN][01] for encoding the position of the register
3256 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3258 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3259 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3261 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3263 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3264 Fix various typos. Add "PAREN" operand.
3265 (MEM, MEM2): Define.
3266 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3267 operands. Fix several typos.
3269 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3272 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3274 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3275 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3277 (mn10300_opcodes): Break opcode format out into its own field.
3278 Update many operand fields to deal with signed vs unsigned
3279 issues. Fix one or two typos in the "mov" instruction
3280 opcode, mask and/or operand fields.
3282 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3284 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3285 m68851 wasn't reset.
3287 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3289 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3290 all opcodes. Very rough cut at operands for all opcodes.
3292 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3295 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3297 * mn10200-opc.c, mn10300-opc.c: New files.
3298 * mn10200-dis.c, mn10300-dis.c: New files.
3299 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3300 * disassemble.c: Break mn10x00 support into 10200 and 10300
3302 * configure.in: Likewise.
3303 * configure: Rebuilt.
3305 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3307 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3309 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3311 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3313 * disassemble (ARCH_mn10x00): Define.
3314 (disassembler): Handle bfd_arch_mn10x00.
3315 * configure.in: Recognize bfd_mn10x00_arch.
3316 * configure: Rebuilt.
3318 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3321 accordingly. Don't declare functions using op_rtn.
3323 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3325 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3326 params to be more standard.
3327 * (disassemble): Print absolute addresses and symbolic names for
3328 branch and jump targets.
3329 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3331 * (v850_opcodes): Add breakpoint insn.
3333 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3335 * m68k-opc.c: Move the fmovemx data register cases before the
3336 other cases, so that they get recognized before the data register
3337 does gets treated as a degenerate register list.
3339 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3341 * mips-opc.c: Add a case for "div" and "divu" with two registers
3342 and a destination of $0.
3344 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3346 * mips-dis.c (print_insn_arg): Add prototype.
3347 (_print_insn_mips): Ditto.
3349 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * mips-dis.c (print_insn_arg): Print condition code registers as
3354 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3356 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3358 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3360 * v850-dis.c (disassemble): Make static. Provide prototype.
3362 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3364 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3367 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3369 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3370 ']' characters into the output stream.
3371 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3372 Add "memop" field to all opcodes (for the disassembler).
3373 Reorder opcodes so that "nop" comes before "mov" and "jr"
3374 comes before "jarl".
3376 * v850-dis.c (print_insn_v850): Fix typo in last change.
3378 * v850-dis.c (print_insn_v850): Properly handle disassembling
3379 a two byte insn at the end of a memory region when the memory
3380 region's size is only two byte aligned.
3382 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3384 * v850-dis.c (v850_reg_names): Define.
3385 (v850_sreg_names, v850_cc_names): Likewise.
3386 (disassemble): Very rough cut at printing operands (unformatted).
3388 * v850-opc.c (BOP_MASK): Fix.
3389 (v850_opcodes): Fix mask for jarl and jr.
3391 * v850-dis.c: New file. Skeleton for disassembler support.
3392 * Makefile.in Remove v850 references, they're not needed here.
3393 * configure.in: Add v850-dis.o when building v850 toolchains.
3394 * configure: Rebuilt.
3395 * disassemble.c (disassembler): Call v850 disassembler.
3397 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3398 (insert_d8_6, extract_d8_6): New functions.
3399 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3400 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3402 (IF4A, IF4B): Use "D7" instead of "D7S".
3403 (IF4C, IF4D): Use "D8_7" instead of "D8".
3404 (IF4E, IF4F): New. Use "D8_6".
3405 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3406 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3408 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3409 (v850_operands): Change D16 to D16_15, use special insert/extract
3410 routines. New new D16 that uses the generic insert/extract code.
3411 (IF7A, IF7B): Use D16_15.
3412 (IF7C, IF7D): New. Use D16.
3413 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3415 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3416 message. Issue an error if the branch offset is odd.
3418 * v850-opc.c: Add notes about needing special insert/extract
3419 for all the load/store insns, except "ld.b" and "st.b".
3421 * v850-opc.c (insert_d22, extract_d22): New functions.
3422 (v850_operands): Use insert_d22 and extract_d22 for
3424 (insert_d9): Fix range check.
3426 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3428 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3429 and set bits field to D9 and D22 operands.
3431 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3433 * v850-opc.c (v850_operands): Define SR2 operand.
3434 (v850_opcodes): "ldsr" uses R1,SR2.
3436 * v850-opc.c (v850_opcodes): Fix opcode specs for
3437 sld.w, sst.b, sst.h, sst.w, and nop.
3439 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3441 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3442 end of the opcode table.
3444 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3446 * d10v-opc.c (pre_defined_registers): Added register pairs,
3447 "r0-r1", "r2-r3", etc.
3449 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3451 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3452 Create I16U for an unsigned 16bit mmediate operand.
3453 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3455 * v850-opc.c (v850_operands): Define EP operand.
3456 (IF4A, IF4B, IF4C, IF4D): Use EP.
3458 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3459 with immediate operand, "movhi". Tweak "ldsr".
3461 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3462 correct. Get sld.[bhw] and sst.[bhw] closer.
3464 * v850-opc.c (v850_operands): "not" is a two byte insn
3466 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3468 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3470 * v850-opc.c (two): Get order of words correct.
3472 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3474 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3475 register source and destination operands.
3476 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3478 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3479 same thinko in "trap" opcode.
3481 * v850-opc.c (v850_opcodes): Add initializer for size field
3484 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3485 Add D8 for 8-bit unsigned field in short load/store insns.
3486 (IF4A, IF4D): These both need two registers.
3487 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3488 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3489 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3490 for "ldsr" and "stsr".
3491 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3494 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3495 short store word (sst.w).
3497 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3499 * v850-opc.c (v850_operands): Added insert and extract fields,
3500 pointers to functions that handle unusual operand encodings.
3502 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3504 * v850-opc.c (v850_opcodes): Enable "trap".
3506 * v850-opc.c (v850_opcodes): Fix order of displacement
3507 and register for "set1", "clr1", "not1", and "tst1".
3509 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3511 * v850-opc.c (v850_operands): Add "B3" support.
3512 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3515 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3517 * v850-opc.c: Close unterminated comment.
3519 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3521 * v850-opc.c (v850_operands): Add flags field.
3522 (v850_opcodes): add move opcodes.
3524 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3526 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3527 * configure: (bfd_v850v_arch) Add new case.
3528 * configure.in: (bfd_v850_arch) Add new case.
3529 * v850-opc.c: New file.
3531 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3533 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3535 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3537 * d10v-opc.c: Add additional information to the opcode
3538 table to help determinine which instructions can be done
3541 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3543 * mpw-make.sed: Update editing of include pathnames to be
3546 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3548 * arm-opc.h: Added "bx" instruction definition.
3550 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3552 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3554 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3556 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3558 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3560 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3562 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3564 * makefile.vms: Update for alpha-opc changes.
3566 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3568 * i386-dis.c (print_insn_i386): Actually return the correct value.
3569 (ONE, OP_ONE): #ifdef out; not used.
3571 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3573 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3574 Changed subi operand type to treat 0 as 16.
3576 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3581 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3583 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3584 memory transfer instructions. Add new format string entries %h and %s.
3585 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3588 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3590 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3591 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3593 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * alpha-dis.c (print_insn_alpha_osf): Remove.
3596 (print_insn_alpha_vms): Remove.
3597 (print_insn_alpha): Make globally visible. Chose the register
3598 names based on info->flavour.
3599 * disassemble.c: Always return print_insn_alpha for the alpha.
3601 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3603 * d10v-dis.c (dis_long): Handle unknown opcodes.
3605 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3607 * d10v-opc.c: Changes to support signed and unsigned numbers.
3608 All instructions with the same name that have long and short forms
3609 now end in ".l" or ".s". Divs added.
3610 * d10v-dis.c: Changes to support signed and unsigned numbers.
3612 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3614 * d10v-dis.c: Change all functions to use info->print_address_func.
3616 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3618 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3619 move ccr/sr insns more strict so that the disassembler only
3620 selects them when the addressing mode is data register.
3622 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3623 * d10v-opc.c (pre_defined_registers): Declare.
3624 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3625 to pick a better name for the registers.
3627 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3629 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3630 operands for fexpand and fpmerge. From Christian Kuehnke
3631 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3633 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3635 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3636 print routine. Take new regnames and cpumask arguments.
3637 Kill the environment variable nonsense.
3638 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3639 (print_insn_alpha_vms): New function. Do VMS style regnames.
3640 * disassemble.c (disassembler): Test bfd flavour to pick
3641 between OSF and VMS routines. Default to OSF.
3643 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3645 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3646 * configure: Rebuild.
3647 * Makefile.in (install): Use @INSTALL_SHLIB@.
3649 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3651 * configure: (bfd_d10v_arch) Add new case.
3652 * configure.in: (bfd_d10v_arch) Add new case.
3653 * d10v-dis.c: New file.
3654 * d10v-opc.c: New file.
3655 * disassemble.c (disassembler) Add entry for d10v.
3657 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3659 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3660 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3662 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3664 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3665 distinguish between variants of the instruction set.
3666 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3667 distinguish between variants of the instruction set.
3669 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3671 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3672 the 8086 instruction set.
3673 * i386-dis.c: General cleanups. Make most things static. Add
3674 prototypes. Get rid of static variables aflags and dflags. Pass
3675 them as args (to almost everything).
3677 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3679 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3681 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3683 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3684 if the next arg is marked with SRC_IN_DST. Gross.
3686 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3687 we're looking for and find EXR.
3689 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3690 if we're looking for KBIT and we don't find it.
3692 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3695 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3696 3bit immediate operands.
3698 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3700 * Released binutils 2.7.
3702 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3703 <kkaempf@progis.ac-net.de>.
3705 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3707 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3709 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3711 * sparc-dis.c (print_insn_sparclite): New routine to print
3712 sparclite instructions.
3714 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3716 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3718 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3720 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3721 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3722 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3724 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3726 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3727 Use autoconf-set values.
3728 (docdir, oldincludedir): Removed.
3729 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3731 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3733 * alpha-opc.c: New file.
3734 * alpha-opc.h: Remove.
3735 * alpha-dis.c: Complete rewrite to use new opcode table.
3736 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3737 * configure: Rebuild with autoconf 2.10.
3738 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3739 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3741 (alpha-opc.o): New target.
3743 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3745 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3746 Set imm_added_to_rs1 even if the source and destination register
3749 * sparc-opc.c: Add some two operand forms of the wr instruction.
3751 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3753 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3756 * disassemble.c (disassembler): Handle H8/S.
3757 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3759 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3761 * sparc-opc.c: Add beq/teq as aliases for be/te.
3763 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3764 <sergei@msil.sps.mot.com>.
3766 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3768 * makefile.vms: New file.
3770 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3772 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3774 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3777 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3779 * i386-dis.c (OP_OFF): Call append_prefix.
3781 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3783 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3784 unsigned long to silence a warning from the Solaris PowerPC
3787 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3789 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3791 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3793 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3795 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3796 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3797 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3798 cpush, cpusha, cpull sparclet insns.
3800 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3802 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3804 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3806 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3807 Set F_FLOAT on other floating point instructions.
3809 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3811 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3813 (powerpc_opcodes): Add 860/821 specific SPRs.
3815 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3817 * configure.in: Permit --enable-shared to specify a list of
3818 directories. Set and substitute BFD_PICLIST.
3819 * configure: Rebuild.
3820 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3821 uses. Set to @BFD_PICLIST@.
3823 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3825 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3826 not "abs", which may be needed for the absolute in something
3827 like btst #0,@10:8. Print L_3 immediates separately from other
3828 immediates. Change ABSMOV reference to ABS8MEM.
3830 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3832 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3833 (current_arch_mask): New static global.
3834 (compute_arch_mask): New static function.
3835 (print_insn_sparc): Delete sparc_v9_p. New static local
3836 current_mach. Resort opcode table if current_mach changes.
3837 Generalize "insn not supported" test.
3838 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3839 Delete test for v9/!v9.
3840 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3842 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3843 (brfcx): Renamed to FBRX.
3844 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3845 coprocessor mnemonics are not supported on the sparclet).
3846 (condf): Renamed to CONDF.
3847 (SLCBCC2): Delete F_ALIAS flag.
3849 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3851 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3852 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3854 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3856 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3857 that the shared library version number is set correctly.
3859 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3861 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3862 Miles Bader <miles@gnu.ai.mit.edu>.
3863 * configure: Rebuild.
3865 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3867 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3870 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3872 * configure: Rebuild with autoconf 2.8.
3874 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3876 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3877 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3879 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3881 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3882 since they appear as targets in Makefile.in.
3883 * configure: Rebuild.
3885 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3887 * mpw-make.sed: Edit out shared library support bits.
3889 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3891 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3892 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3893 (sparc_opcodes): Add sparclet insns.
3894 (sparclet_cpreg_table): New static local.
3895 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3896 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3898 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3900 * i386-dis.c (index16): New static variable.
3901 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3903 (OP_indirE): Return result of OP_E.
3904 (OP_E): Check for 16 bit addressing mode, and disassemble
3905 correctly. Optimised 32 bit case a little. Don't print
3906 "(base,index,scale)" when sib specifies only an offset.
3908 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3910 * configure.in: Set and substitute SHLIB_DEP.
3911 * configure: Rebuild.
3912 * Makefile.in (SHLIB_DEP): New variable.
3913 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3914 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3915 COMMON_SHLIB, add them to piclist with appropriate modifications.
3916 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3917 here: just use piclist.
3919 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3921 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3922 (print_insn_sparc): Rewrite v9/not-v9 tests.
3923 (compare_opcodes): Likewise.
3924 * sparc-opc.c (MASK_<ARCH>): Define.
3925 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3926 (sparclet,v6notv9): Define.
3927 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3928 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3930 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3932 * configure.in: Call AC_PROG_CC before configure.host.
3933 * configure: Rebuild.
3935 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3937 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3939 * i386-dis.c (onebyte_has_modrm): New static array.
3940 (twobyte_has_modrm): New static array.
3941 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3943 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3945 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3948 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3950 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3953 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3955 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3956 m68010up, not just m68020up | cpu32.
3958 * Makefile.in (SONAME): New variable.
3959 ($(SHLINK)): Make a link to the transformed name, as well.
3960 (stamp-tshlink): New target.
3961 (install): Skip stamp-tshlink during install.
3963 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3965 * configure.in: Call AC_ARG_PROGRAM.
3966 * configure: Rebuild.
3967 * Makefile.in (program_transform_name): New variable.
3968 (install): Transform library name before installing it.
3970 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3972 * i960-dis.c (mem): Add HX dcinva instruction.
3974 Support for building as a shared library, based on patches from
3975 Alan Modra <alan@spri.levels.unisa.edu.au>:
3976 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3977 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3978 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3979 * configure: Rebuild.
3980 * Makefile.in (ALLLIBS): New variable.
3981 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3982 (COMMON_SHLIB, SHLINK): New variables.
3983 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3984 (STAGESTUFF): Remove variable.
3985 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3986 (stamp-piclist, piclist): New targets.
3987 ($(SHLIB), $(SHLINK)): New targets.
3988 ($(OFILES)): Depend upon stamp-picdir.
3989 (disassemble.o): Build twice if PICFLAG is set.
3990 (MOSTLYCLEAN): Add pic/*.o.
3991 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3992 (distclean): Remove pic and stamp-picdir.
3993 (install): Install shared libraries.
3994 (stamp-picdir): New target.
3996 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3998 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3999 Print unknown instruction as "unknown", rather than in hex.
4001 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4003 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4005 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4007 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4009 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4011 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4012 when necessary. From Ulrich Drepper
4013 <drepper@myware.rz.uni-karlsruhe.de>.
4015 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4017 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4018 sparc_num_opcodes. Update architecture enum values.
4019 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4020 (sparc_opcode_lookup_arch): New function.
4021 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4022 (sparc_opcodes): Add v9a shutdown insn.
4024 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4026 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4027 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4029 (print_insn_sparc64): Deleted.
4030 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4033 * sparc-opc.c (architecture_pname): Add v9a.
4035 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4037 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4038 incorrectly defined as 0x16 when it should be 0x15.
4039 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4040 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4041 excb (exception barrier) which is defined in the Alpha
4042 Architecture Handbook version 2.
4043 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4044 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4045 disassembled as or, for example.
4047 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4049 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4050 (_print_insn_mips): Change i from int to unsigned int.
4052 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4054 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4055 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4057 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4059 * i386-dis.c: Added Pentium Pro instructions.
4061 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4063 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4066 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4068 * sh-opc.h (sh_nibble_type): Added REG_B.
4069 (sh_arg_type): Added A_REG_B.
4070 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4072 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4074 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4076 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4078 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * Makefile.in (distclean): Remove stamp-h. From Ronald
4081 F. Guilmette <rfg@monkeys.com>.
4083 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4085 From David Mosberger-Tang <davidm@azstarnet.com>:
4086 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4089 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4091 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4092 (sh_table): Added many SH3 opcodes.
4093 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4095 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4097 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4098 (subco,subco.): Mark this PPC, not PPCCOM.
4100 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * configure: Rebuild with autoconf 2.7.
4104 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4106 * configure: Rebuild with autoconf 2.6.
4108 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4110 * configure.in: Sort list of architectures. Accept but do nothing
4111 for alliant, convex, pyramid, romp, and tahoe.
4113 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4115 * a29k-dis.c (print_special): Change num to unsigned int.
4117 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4119 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4122 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4124 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4125 * configure: Rebuilt.
4127 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4129 * configure.in: Add case for bfd_i860_arch.
4130 * configure: Rebuild.
4132 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4134 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4135 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4136 (NEXTDOUBLE): Likewise.
4137 (print_insn_m68k): Don't match fmoveml if there is more than one
4138 register in the list.
4139 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4141 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4143 * m68k-opc.c: Use #W rather than #w.
4144 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4146 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4148 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4149 and likewise for all the dbxx opcodes.
4151 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4153 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4155 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4157 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4158 the VR4100 specific instructions to the mips_opcodes structure.
4160 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4162 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4163 ugly Metrowerks bug in CW6, is fixed in CW7.
4165 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4167 * ppc-opc.c (whole file): Add flags for common/any support.
4169 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4171 * Makefile.in (BISON): Remove macro.
4172 (FLAGS_TO_PASS): Remove BISON.
4174 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4176 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4178 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4179 instructions that take no args by looking at the match mask.
4180 (print_insn_arg): Always print "%" before register names.
4181 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4182 [case '_']: Don't print "@#" before address.
4183 [case 'J']: Use "%s" as format string, not register name.
4184 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4186 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4188 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4191 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4193 From David Mosberger-Tang <davidm@azstarnet.com>
4195 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4196 (alpha_insn_set): added definitions for VAX floating point
4197 instructions (Unix compilers don't generate these, but handcoded
4198 assembly might still use them).
4200 * alpha-dis.c (print_insn_alpha): added support for disassembling
4201 the miscellaneous instructions in the Alpha instruction set.
4203 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4205 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4206 no longer create sysdep.h, sed ppc-opc.c to work around a
4207 serious Metrowerks C bug.
4208 * mpw-make.in: Remove.
4209 * mpw-make.sed: New file, used by mpw-configure to edit
4210 Makefile.in into an MPW makefile.
4212 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4214 * Makefile.in (maintainer-clean): New synonym for realclean.
4216 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4218 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4219 which use '0', '1', and '2' instead. Specify the proper size for
4220 a pmove immediate operand. Correct the pmovefd patterns to be
4221 moves to a register, not from a register.
4222 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4224 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4226 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4227 %psr, %wim, %tbr as F_NOTV9.
4229 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4231 * Makefile.in (Makefile): Just rebuild Makefile when running
4233 (config.h, stamp-h): New targets.
4234 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4235 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4236 rebuilding config.h.
4237 * configure: Rebuild.
4239 * mips-opc.c: Change unaligned loads and stores with "t,A"
4240 operands to use "t,A(b)".
4242 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4244 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4246 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4248 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4249 until 3 instead of until 2.
4251 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4253 * Makefile.in (ALL_CFLAGS): Define.
4254 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4255 (MOSTLYCLEAN): Add config.log.
4256 (distclean): Don't remove config.log.
4257 * configure.in: Substitute HDEFINES.
4258 * configure: Rebuild.
4260 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4262 * sh-opc.h (sh_arg_type): Add F_FR0.
4263 (sh_table, case fmac): Add F_FR0 as first argument.
4265 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4267 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4269 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4271 * sparc-dis.c: Remove all references to NO_V9.
4273 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * aclocal.m4: Just include ../bfd/aclocal.m4.
4276 * configure: Rebuild.
4278 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4280 * sparc-dis.c (X_DISP19): Define.
4281 (print_insn, case 'G'): Use it.
4282 (print_insn, case 'L'): Sign extend displacement.
4284 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4286 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4287 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4288 host_makefile_frag or frags.
4289 * aclocal.m4: New file.
4290 * configure: Rebuild.
4291 * Makefile.in (INSTALL): Set to @INSTALL@.
4292 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4293 (INSTALL_DATA): Set to @INSTALL_DATA@.
4295 (AR_FLAGS): Set to rc rather than qc.
4296 (CC): Define as @CC@.
4297 (CFLAGS): Set to @CFLAGS@.
4298 (@host_makefile_frag@): Remove.
4299 (config.status): Remove dependency upon @frags@.
4301 * configure.in: ../bfd/config.bfd now just sets shell variables.
4302 Use them rather than looking through target Makefile fragments.
4303 * configure: Rebuild.
4305 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4307 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4309 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4311 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4312 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4315 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4316 (lookup_{name,value}): New functions.
4317 (prefetch_table): New static local.
4318 (sparc_{encode,decode}_prefetch): New functions.
4319 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4321 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4323 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4326 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4328 * sh-dis.c: Correct comment on first line of file.
4330 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4332 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4334 * sparc-opc.c (asi, membar): New static locals.
4335 (sparc_{encode,decode}_{asi,membar}): New functions.
4336 (sparc_opcodes, membar insn): Fix.
4337 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4338 Support decoding of membar masks.
4341 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4343 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4345 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4347 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4348 and likewise for the other branches. Add bhs as an alias for bcc,
4349 and likewise for the size variants. Add dbhs as an alias for
4352 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4354 * sh-opc.h (FP sts instructions): Update to match reality.
4356 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4358 * m68k-dis.c: (fpcr_names): Add % before all register names.
4359 (reg_names): Likewise.
4360 (print_insn_arg): Don't explicitly print % before register names.
4361 Add % before register names in static array names. In case 'r',
4362 print data registers as `@(Dn)', not `Dn@'. When printing a
4363 memory address, don't print @# before it.
4364 (print_indexed): Change base_disp and outer_disp from int to
4365 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4366 syntax. Sign extend 8 byte displacement correctly.
4367 (print_base): Print using MIT syntax. Print zpc when appropriate.
4368 Change parameter disp from int to bfd_vma.
4370 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4373 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4375 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4376 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4377 * sh-opc.h (sh_arg_type): Add new operand types.
4378 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4380 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4382 * Makefile.in (distclean): Remove generated file config.h.
4384 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4386 * Makefile.in (distclean): Remove generated file config.h.
4388 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4390 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4392 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4394 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4395 rather than numopcodes. Use m68k_opcodes rather than removed
4396 opcode function. Don't check F_ALIAS.
4397 (print_insn_arg): Change first parameter to be const char *.
4398 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4399 (m68k-opc.o): New target.
4400 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4401 * configure: Rebuild.
4403 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4405 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4406 (opcode_bits, opcode_hash_table): New variables.
4407 (opcodes_initialized): Renamed from opcodes_sorted.
4408 (build_hash_table): New function.
4409 (is_delayed_branch): Use hash table.
4410 (print_insn): Renamed from print_insn_sparc, made static.
4411 Build and use hash table. If !sparc64, ignore sparc64 insns,
4412 and vice-versa if sparc64.
4413 (print_insn_sparc, print_insn_sparc64): New functions.
4414 (compare_opcodes): Move sparc64 opcodes to end.
4415 Print commutative insns with constant second.
4416 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4418 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4420 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4421 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4422 avoids printing a delay slot in a delay slot.
4423 * sh-opc.h (sh_table): Fully bracket last entry.
4425 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4427 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4429 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4431 * configure.in: Get host_makefile_frag from ${srcdir}.
4433 * configure.in: Autoconfiscated. Check for string[s].h. Create
4434 config.h from config.in. Don't set up sysdep.h link.
4435 * sysdep.h: New file.
4436 * configure, config.in: New files, generated from configure.in.
4437 * Makefile.in: Updated to be processed autoconf-style.
4438 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4439 (Makefile): Depend on config.status.
4440 (config.status): New rule.
4441 * configure.bat: Update Makefile substitutions.
4443 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4445 * mips-opc.c (L1): Define.
4446 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4447 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4450 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4452 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4453 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4454 have multiple add units but only a single logical unit.
4456 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4457 shifted by 18, without any insertion or extraction function.
4458 (insert_cr, extract_cr): Remove.
4460 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4462 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4465 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4467 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4468 * sh-opc.h: Add copyright.
4470 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4472 * Makefile.in (crunch-m68k): Delete extra target accidentally
4473 checked in a while ago.
4475 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4477 * sh-opc.h (sh_table): Add SH3 support.
4479 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4481 * sh-opc.h: Added bsrf and braf.
4483 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4485 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4486 bogus [ls]fm{ea,fd} patterns.
4488 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4489 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4490 initialize it from memory. Make function static.
4491 (print_insn_{big,little}_arm): New functions.
4492 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4493 the correct endianness.
4495 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4497 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4500 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4502 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4503 17th, so that it builds again using GCC as the compiler.
4505 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4507 * mips-dis.c (print_insn_little_mips): Cast return value from
4508 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4509 expects an unsigned long, and that might be fewer words of
4510 argument storage (e.g., if bfd_vma is long long on a 32-bit
4512 (print_insn_big_mips): Likewise with bfd_getb32 value.
4513 (_print_insn_mips): Now static.
4515 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4517 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4518 gcc memory hog problem with initializer is fixed.
4520 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4522 Merge in support for Mac MPW as a host.
4523 (Old change descriptions retained for informational value.)
4525 * mpw-config.in (archname): Compute from the config.
4526 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4528 * mpw-config.in (target_arch): Compute from canonical target.
4529 (m68k, mips, powerpc, sparc): Add architectures.
4530 * mpw-make.in (disassemble.c.o): Add.
4531 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4533 * mpw-config.in (BFD_MACHINES): Set to a default value.
4534 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4536 * mpw-make.in (CSEARCH): Add extra-include to search path.
4538 * mpw-config.in (varargs.h): Don't create.
4539 (sysdep.h): Create using forward-include.
4540 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4542 * mpw-config.in: New file, MPW version of configure.in.
4543 * mpw-make.in: New file, MPW version of Makefile.in.
4545 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4547 * alpha-dis.c (print_insn_alpha): Put empty statement after
4550 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4552 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4553 (low_sign_extend): Likewise.
4554 (get_field): Delete unused function.
4555 (set_field, deposit_14, deposit_21): Likewise.
4557 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4559 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4562 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4564 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4566 * alpha-opc.h (OSF_ASMCODE): define
4567 print pal-code names as defined in App C of the
4568 Alpha Architecture Reference Manual
4570 * alpha-dis.c: cleaned up output
4571 print stylized code forms as defined in App A.4.3 of the
4572 Alpha Architecture Reference Manual
4574 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4576 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4578 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4581 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4583 * m68k-dis.c (opcode): New function. Returns address of opcode
4584 table entry given index, even if the opcode table was split to
4585 work around gcc bugs.
4586 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4588 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4589 (reg_names): Now const.
4590 (print_insn_arg): Arrays cacheFieldName and names now const.
4591 (print_indexed): Array scales now const.
4593 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4595 * ppc-opc.c: Sort recently added instructions by minor opcode
4596 number within major opcode number.
4598 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4600 * hppa-dis.c: Include libhppa.h.
4602 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4604 * mips-opc.c: Change dli to use M_DLI, and add dla.
4606 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4608 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4610 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4612 * mips-opc.c: Add r4650 mul instruction.
4614 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4616 * mips-opc.c: Add uld and usd macros for unaligned double load and
4619 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4621 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4622 mfdcr, mtdcr, icbt, iccci.
4624 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4626 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4627 signed char fields to shorts, more portable.
4629 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4631 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4632 char fields as signed chars, since they may have negative values.
4634 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4636 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4637 (mycroft@netbsd.org).
4639 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4641 From "Logg, Ed" <elogg@ea.com>:
4642 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4643 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4646 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4648 * ppc-opc.c: Changes based on patch from David Edelsohn
4649 <edelsohn@mhpcc.edu>.
4650 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4653 (insert_tbr): New static function.
4654 (extract_tbr): New static function.
4655 (XFXFXM_MASK, XFXM): Define.
4656 (XSPRBAT_MASK, XSPRG_MASK): Define.
4657 (powerpc_opcodes): Add instructions to access special registers by
4658 name. Add mtcr and mftbu.
4660 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4662 * mips-opc.c (P3): Define.
4663 (mips_opcodes): Add mad and madu.
4665 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4667 * configure.in: Add W65 support.
4668 * disassemble.c: Likewise.
4669 * w65-opc.h, w65-dis.c: New files.
4671 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4673 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4676 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4678 * mips-opc.c: Add dli as a synonym for li.
4680 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4682 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4683 print something for reserved opcode values, even if it won't
4686 * mips-dis.c (_print_insn_mips): When initializing, shift right
4687 and mask, to avoid sign extension problems on the Alpha.
4689 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4692 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4694 * sh-opc.h (mov.l gbr): Get direction right.
4695 * sh-dis.c (print_insn_shx): New function.
4696 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4697 print opcodes with right byte order.
4699 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4701 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4702 to avoid conflicts with getopt.
4704 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4706 * hppa-dis.c (print_insn_hppa): Read the instruction using
4707 bfd_getb32, so that it works on a little endian or 64 bit host.
4708 Remove unused local variable op.
4710 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4712 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4713 addu does not work correctly if -mips3.
4715 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4717 * a29k-dis.c (print_special): Add special register names defined
4718 on 29030, 29040 and 29050.
4719 (print_insn): Handle new operand type 'I'.
4721 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4723 * Makefile.in (INSTALL): Use top level install.sh script.
4725 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4727 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4728 that it works on a little endian host.
4730 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4732 * configure.in: Use ${config_shell} when running config.bfd.
4734 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4736 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4738 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4740 * a29k-dis.c (print_insn): Print the opcode.
4742 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4744 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4746 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4748 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4750 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4752 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4753 which store a value into memory.
4755 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4757 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4758 * arm-dis.c, arm-opc.h: New files.
4760 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4762 * Makefile.in (ns32k-dis.o): Add dependency.
4763 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4764 string, not as array of chars.
4766 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4768 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4770 * sparc-opc.c: Added sparclite extended FP operations, and
4771 versions of v9 impdep* instructions permitting specification of
4774 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4776 * i960-dis.c (reg_names): Now const.
4777 (struct sparse_tabent): New type, copied from array type in mem
4779 (ctrl): Local static array ctrl_tab now const.
4780 (cobr): Local static array cobr_tab now const.
4781 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4782 static variable mem_tab no longer explicitly initialized. Changed
4783 mem_init to const array of struct sparse_tabent.
4784 (reg): Local static variable reg_tab no longer explicitly
4785 initialized. Changed reg_init to const array of struct
4787 (ea): Local static array scale_tab now const.
4789 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4792 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4794 * configure.bat: the disassember needs to be enabled for
4795 "objdump -d" to work in djgpp.
4797 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4799 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4800 (invalid_float): Enabled general version, doesn't require running
4801 on ns32k host. Changed to take char* argument, and test for
4802 explicitly specified sizes, instead of using sizeof() on host CPU
4804 (INVALID_FLOAT): Cast first argument.
4805 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4806 list_P032, list_M032): Now const.
4807 (optlist, list_search): Made appropriate arguments now point to
4809 (print_insn_arg): Changed static array of one-character-string
4810 pointers into a static const array of characters; fixed sprintf
4811 statement accordingly.
4813 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4815 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4816 from distribution. A ns32k-dis.c from a previous distribution has
4817 been brought up to date and supports the new interface.
4819 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4821 * configure.in: add bfd_ns32k_arch target support.
4823 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4824 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4826 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4828 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4831 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4833 * h8300-dis.c, mips-dis.c: Don't use true and false.
4835 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4837 * configure.in: Change --with-targets to --enable-targets.
4839 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4841 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4842 opcodes to the first instruction with that opcode, to speed
4843 disassembly of large files. From ralphc@pyramid.com (Ralph
4846 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4848 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4850 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4852 * configure.bat: update to latest makefile.in
4854 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4856 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4857 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4858 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4859 slot insn is in a delay slot.
4860 * z8k-opc.h: (resflg): Fix patterns.
4861 * h8500-opc.h Fix CR insn patterns.
4863 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4866 "cmpl" before POWER versions, so that gas -many uses them.
4868 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4870 * disassemble.c: New file.
4871 * Makefile.in (OFILES): Add disassemble.o.
4872 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4873 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4874 binutils/configure.in.
4876 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4877 opcode being examined.
4879 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4882 (insert_ral, insert_ram, insert_ras): New functions.
4883 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4884 RAS for store with update.
4886 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4888 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4889 (edelsohn@npac.syr.edu).
4891 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4893 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4896 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4898 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4900 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4902 * ppc-opc.c (powerpc_operands): The signedp field has been
4903 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4904 instead. Add new operand SISIGNOPT.
4905 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4906 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4907 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4910 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4912 * i386-dis.c (struct private): Renamed to dis_private. `private'
4913 is a reserved word for dynix cc.
4915 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * configure.in: Change error message to refer to bfd/config.bfd
4918 rather than bfd/configure.in.
4920 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4922 * ppc-opc.c: Define POWER2 as short alias flag.
4923 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4926 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4928 * i960-dis.c (print_insn_i960): Don't read a second word for
4929 opcodes 0, 1, 2 and 3.
4931 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4933 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4935 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4937 * m68881-ext.c: Removed; no longer used.
4938 * Makefile.in: Changed accordingly.
4940 * m68k-dis.c (ext_format_68881): Don't declare.
4941 (print_insn_m68k): If an instruction uses place 'i', it uses at
4942 least four fixed bytes.
4943 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4944 extended float, convert to double using floatformat_to_double, not
4945 ieee_extended_to_double, and fetch the data before converting it.
4947 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4949 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4950 davidj@ICSI.Berkeley.EDU (David Johnson).
4952 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4954 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4955 PowerPC uses bdnz[l][a].
4957 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4959 * dis-buf.c, i386-dis.c: Include sysdep.h.
4961 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4963 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4965 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4966 by Motorola PowerPC 601 with PPC_OPCODE_601.
4967 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4968 Disassemble Motorola PowerPC 601 instructions as well as normal
4969 PowerPC instructions.
4971 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4973 * i960-dis.c (reg, mem): Just use a static array instead of
4976 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4978 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4979 condition name index if this is for a negated condition.
4981 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4982 Floating point format for 'H' operand is backwards from normal
4983 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4984 operands (fmpyadd and fmpysub), handle bizarre register
4985 translation correctly for single precision format.
4987 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4988 or 'I' operands if the next format specifier is 'M' (fcmp
4989 condition completer).
4991 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4993 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4994 single number giving a bitmask for the MB and ME fields of an M
4995 form instruction. Change NB to accept 32, and turn it into 0;
4996 also turn 0 into 32 when disassembling. Seperated SH from NB.
4997 (insert_mbe, extract_mbe): New functions.
4998 (insert_nb, extract_nb): New functions.
4999 (SC_MASK): Mask out SA and LK bits.
5000 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5001 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5002 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5003 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5004 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5005 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5006 (powerpc_macros): Define table of macro definitions.
5007 (powerpc_num_macros): Define.
5009 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5010 if PPC_OPERAND_NEXT is set.
5012 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5014 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5015 char. Retrieve contents using bfd_getl32 instead of shifting.
5017 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5019 * ppc-opc.c: New file. Opcode table for PowerPC, including
5020 opcodes for POWER (RS/6000).
5021 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5022 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5023 (CFILES): Add ppc-dis.c.
5024 (ppc-dis.o, ppc-opc.o): New targets.
5025 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5027 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5029 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5030 No space before 'u', 'f', or 'N'.
5032 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5034 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5035 farther than we should.
5037 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5039 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5041 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5043 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5045 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5046 needs it, to prevent reading past the end of a section.
5048 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5051 Removed t,A case for la; always use t,A(b) case.
5053 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5055 From Ted Lemen <mellon@pepper.ncd.com>
5056 * mips-dis.c (print_insn_arg): Handle 'k'.
5057 * mips-opc.c: Make cache use k, not t.
5059 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5061 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5062 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5063 FLOAT_FORMAT_CODE to put out floating point register names.
5065 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5069 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5071 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5073 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5076 larger than 32. Moved dsxx32 variants first for disassembler.
5078 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5080 * z8kgen.c, z8k-opc.h: Add full lda information.
5082 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5084 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5085 movb instructions. Any necessary space will be emitted by
5086 the code to handle nullification completers.
5088 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5090 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5092 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5094 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5095 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5097 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5101 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5103 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5104 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5106 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5108 * m88k-dis.c (m88kdis): comment change. Remove space after
5110 (printop): handle new arg types DEC and XREG for m88110.
5112 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5114 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5115 type for absolute branch addresses. Delete special
5116 "ble" and "be" code in 'W' operand code.
5118 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5120 * mips-opc.c: Set hazard information correctly for branch
5121 likely instructions.
5123 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5125 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5126 info->fprintf_func for printing and info->print_address_func for
5129 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5133 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5136 Corrected second case of "b" for disassembler.
5138 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5140 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5141 to BFD swapping routines to correspond to BFD name changes.
5143 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5145 * mips-opc.c: Change div machine instruction to be z,s,t rather
5146 than s,t. Change div macro to be d,v,t rather than d,s,t.
5147 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5148 rem and remu which generates only the corresponding div
5149 instruction. This is for compatibility with the MIPS assembler,
5150 which only generates the simple machine instruction when an
5151 explicit destination of $0 is used.
5152 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5154 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5156 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5157 WR_31 hazard for bal, bgezal, bltzal.
5159 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5161 * hppa-dis.c (print_insn_hppa): Use print function
5162 from within the disassemble_info, not fprintf_filtered.
5164 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5166 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5167 Law, law@cs.utah.edu.)
5169 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5171 * mips-opc.c ("absu"): Removed.
5174 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5176 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5177 Changed hazard information to distinguish between memory load
5178 delays and coprocessor load delays.
5180 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5182 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5184 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5186 * configure.in: Don't pass cpu to config.bfd.
5188 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5190 * m88k-dis.c (m88kdis): Make class unsigned.
5192 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5194 * alpha-dis.c (print_insn_alpha): One branch format case was
5195 missing the instruction name.
5197 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5199 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5200 Add the arch-specific auxiliary files.
5201 (OFILES): Remove the arch-specific auxiliary files
5202 and use BFD_MACHINES instead of DIS_LIBS.
5203 * configure.in: Set BFD_MACHINES based on --with-targets option.
5205 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5207 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5210 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5212 * sparc-opc.c: Change CONST to const to deal with gcc
5213 -Dconst=__const -traditional.
5215 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5217 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5218 coprocessor instructions out of #if 0, and made them use new
5221 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5223 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5225 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5227 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5228 instruction, for use by the disassembler.
5230 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5231 hand-coded sign extensions that depended on 32-bit host ints.
5232 FIXME, we still depend on big-endian host bitfield ordering.
5233 (sparc_print_insn): Set the insn_info_valid field, and the
5234 other fields that describe the instruction being printed.
5236 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5238 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5239 `jmp' instead of just one of them.
5241 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5243 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5244 (fput_fp_reg_r): Renamed from fput_reg_r.
5245 (fput_fp_reg): New function.
5246 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5248 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5250 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5252 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5254 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5256 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5257 don't output a space.
5259 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5261 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5263 * mips-opc.c: New file, containing opcode table from
5264 ../include/opcode/mips.h.
5265 * Makefile.in: Add it.
5267 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5269 * m88k-dis.c: New file, moved in from gdb and changed to use the
5270 new dis-asm.h disassembler interface.
5271 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5272 (m88k-dis.o): New target.
5274 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5276 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5277 argument string const char * to correspond to opcode/mips.h.
5279 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5281 * mips-dis.c: Updated to account for name changes in new version
5283 * Makefile.in: Added header file dependencies.
5285 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5287 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5289 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5291 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5292 extend, rather than shifts.
5294 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5296 * Makefile.in: Undo 15 June change.
5298 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5300 * m68k-dis.c (print_insn_arg): Change return value to byte count
5302 * m68k-dis.c: Re-write to detect invalid operands before
5303 printing anything, so we can handle this the same way we
5304 handle invalid opcodes.
5306 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5308 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5310 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5312 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5315 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5317 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5319 * configure.in: Do make sysdep.h link.
5320 * Makefile.in: Search ../include. Don't search ../bfd.
5322 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5324 Changes from Jeff Law, law@cs.utah.edu:
5325 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5326 Do not print a space before the completers specified by
5329 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5331 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5332 defined, since gdb has been fixed.
5334 Changes from Jeff Law, law@cs.utah.edu:
5335 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5336 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5337 be a *disassemble_info, not a *FILE.
5338 * hppa-dis.c: Support 'd', '!', and 'a'.
5339 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5340 * hppa-dis.c: Delete cases which are no longer needed.
5342 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5344 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5346 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5348 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5351 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5353 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5354 * configure.in: No longer need to configure to get sysdep.h.
5356 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5358 * Patches from Jeffrey Law <law@cs.utah.edu>.
5359 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5360 templates for 1.1 FP computational instructions.
5362 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5364 * h8500-dis.c (print_insn_h8500): Address argument is type
5366 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5369 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5370 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5372 * sparc-dis.c (compare_opcodes): Move static declaration to
5375 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5377 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5378 instruction, remove unimp hack from 'l' argument.
5380 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5382 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5385 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5387 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5388 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5391 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5393 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5394 arrays of string pointers to 2-d arrays of chars, to save
5397 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5399 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5400 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5402 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5404 * hppa-dis.c: New file from Utah, adapted to new disassembler
5406 * Makefile.in: Include it.
5408 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5410 * sh-dis.c, sh-opc.h: New files.
5412 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5414 * alpha-dis.c, alpha-opc.h: New files.
5416 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5418 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5421 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5423 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5425 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5427 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5430 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5432 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5433 and double percent signs a few places.
5435 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5437 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5438 Use info->print_address_func not print_address.
5440 * dis-buf.c (generic_print_address): New function.
5442 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5444 * Makefile.in: Add sparc-dis.c.
5445 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5447 Add `add' instruction to the set that get checked
5448 for a preceding `sethi' in order to print an absolute address.
5449 * (print_insn): Disassembly prefers real instructions.
5450 (is_delayed_branch): Speed up.
5451 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5452 Still missing some float ops, and needs testing.
5453 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5454 F_ALIAS. Use printf, not fprintf, when not passing a file
5456 (compare_opcodes): Check that identical instructions have
5457 identical opcodes, complain otherwise.
5460 * Include reg_names.
5462 Use dis-asm.h/read_memory_func interface.
5464 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5466 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5467 deliberately return non-zero to setjmp from longjmp. Otherwise
5468 this code fails to compile.
5470 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5472 * m68k-dis.c: Fix prototype for fetch_arg().
5474 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5476 * dis-buf.c: New file, for new read_memory_func interface.
5477 Makefile.in (OFILES): Include it.
5478 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5479 Use new read_memory_func interface.
5481 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5483 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5484 * h8500-opc.h: Fix couple of opcodes.
5486 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5488 * Makefile.in: add dvi & installcheck targets
5490 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5492 * Makefile.in: Update for h8500-dis.c.
5494 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5496 * h8500-dis.c, h8500-opc.h: New files
5498 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5500 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5501 ../include/dis-asm.h.
5502 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5503 and ../gdb/m68k-pinsn.c).
5504 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5505 and ../gdb/i386-pinsn.c).
5506 * m68881-ext.c: New file. Moved definition of
5507 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5508 * Makefile.in: Adjust for new files.
5509 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5510 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5511 can be dis-assembled.
5513 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5515 * mips-dis.c (print_insn_arg): Now returns void.
5517 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5519 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5520 files that use the macros.
5522 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5524 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5525 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5526 (CFILES): Added mips-dis.c.
5528 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5530 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5531 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5533 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5535 * Makefile.in: Improve *clean rules.
5536 * configure.in: Allow a default host.
5538 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5540 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5541 files include other sysdep files
5543 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5545 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5547 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5549 * configure.in: For host support, use ../bfd/configure.host
5550 so it stays in sync with the ../bfd/hosts database.
5552 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5554 * configure.in: use cpu-vendor-os triple instead of nested cases
5556 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5558 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5559 *always* the wrong one.
5561 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5563 * z8kgen.c: added copyright info
5565 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5567 * z8k-dis.c (unparse_instr): prettier tabs
5568 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5570 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5572 * configure.in: Add ncr* configuration.
5573 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5574 picayune ANSI compilers happy.
5576 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5578 * configure.in (i386): Make i386 and i486 synonymous for now.
5579 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5581 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5583 * Makefile.in (install): Fix typo.
5585 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5587 * Makefile.in (make): Remove obsolete crud.
5588 (sparc-opc.o): Avoid Sun Make VPATH bug.
5590 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5592 * Makefile.in: since there are no SUBDIRS, remove rule and
5593 references of subdir_do.
5595 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5597 * Makefile.in (install): Get the library name right here too.
5598 Don't install bfd.h, since it's unrelated to this library. No
5599 subdirs to recurse into, either.
5600 (CFILES): The source file has a .c suffix, not .o.
5602 * sparc-opc.c: New file, moved from BFD.
5603 * Makefile.in (OFILES): Build it.
5605 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5607 * z8k-dis.c: fixed forward refferences of some declarations.
5609 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5611 * Makefile.in: get the name of the library right
5613 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5615 * z8k-dis.c: knows how to disassemble z8k stuff
5616 * z8k-opc.h: new file full of z8000 opcodes
5620 version-control: never