2 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
4 * d30v-opc.c (d30v_opcode_table): Set new flags bits
5 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
8 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
10 * configure: Only build libopcodes shared if --enable-shared's value
11 was `yes', or was set to `*opcodes*'.
12 * aclocal.m4: Likewise.
15 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
17 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
20 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
22 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
23 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
24 offset forms before the 15 bit forms, to default to the long forms.
27 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
29 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
31 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
33 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
34 symbol if none is present.
35 (print_insn_big_arm): Prevent examination of stored symbol if
38 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
40 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
42 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
44 * disassemble.c: Remove disasm_symaddr() function.
46 * arm-dis.c: Use info->symbol instead of info->flags to determine
47 if disassmbly should be in Thumb or Arm mode.
49 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
51 * arm-dis.c: Add support for disassembling Thumb opcodes.
52 (print_insn_thumb): New function.
54 * disassemble.c (disasm_symaddr): New function.
56 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
57 (thumb_opcodes): Table of Thumb opcodes.
59 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
61 * m68k-opc.c (btst): Change Dd@s to Dd;b.
63 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
64 and 'v' as operand types.
66 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
68 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
69 <olivier.carmona@di.epfl.ch>.
70 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
71 which has a two word opcode with a one word argument.
74 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
76 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
78 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
82 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
84 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
85 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
86 (ftrv): Slay the cut-and-paste monster.
89 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
91 * d10v-dis.c (print_operand):
92 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
94 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
96 * d10v-opc.c (OPERAND_FLAG): Split into:
97 (OPERAND_FFLAG, OPERAND_CFLAG) .
101 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
103 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
104 field for all INSN_MACRO's.
107 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
109 * mips-opc.c (sync,cache): These are 3900 insns.
111 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
113 sh-opc.h (sh_table): Remove ftst/nan.
115 start-sanitize-vr5400
116 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
118 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
119 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
121 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
125 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
127 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
128 Add tx49 insns and configury.
131 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
133 * mips-opc.c (ffc, ffs): Fix mask.
136 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
138 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
142 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
144 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
145 start-sanitize-vr5400
146 Added VR5400 instructions.
147 (N5): New cpu-id macro.
149 (WR_HILO, RD_HILO, MOD_HILO): New macros.
151 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
153 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
154 (WR_HILO, RD_HILO, MOD_HILO): New macros.
156 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
158 * v850-dis.c (disassemble): Replace // with /* ... */
160 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
162 * sparc-opc.c: Add wr & rd for v9a asr's.
163 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
164 (v9a_asr_reg_names): New variable.
165 Patch from David Miller <davem@vger.rutgers.edu>.
167 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
169 * sparc-opc.c (v9notv9a): New insn type.
170 (IMPDEP): Move to the end to not conflict with edge8 et al.
171 Patch from David Miller <davem@vger.rutgers.edu>.
173 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
175 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
177 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
179 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
181 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
183 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
184 of disassemble_info structure to determine if an overlay address
185 has a matching symbol in low memory.
187 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
188 new symbol_at_address_func field in disassemble_info structure.
190 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
192 * v850-opc.c (extract_d22): Use signed arithmatic.
194 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
196 * mips-opc.c: Three op mult is not an ISA insn.
198 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
200 * mips-opc.c: Fix formatting.
202 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
204 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
205 than assuming that char is signed. Explicitly sign extend 16 bit
206 values, rather than assuming that short is 16 bits.
207 (OP_sI, OP_J, OP_DIR): Likewise.
210 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
212 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
216 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
218 * v850-opc.c: Fix typo in comment.
220 * v850-dis.c (disassemble): Add test of processor type when
223 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
225 * configure.in: Use a diversion to set enable_shared before the
226 arguments are parsed.
227 * configure: Rebuild.
229 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
231 * m68k-opc.c (TBL1): Use ! rather than `.
232 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
234 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
236 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
238 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
240 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
243 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
244 * aclocal.m4: Rebuild with new libtool.
245 * configure: Rebuild.
248 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
250 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
253 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
255 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
257 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
259 * v850-opc.c (v850_opcodes): Further rearrangements.
262 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
264 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
267 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
269 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
272 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
274 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
276 * mips16-opc.c: Added mips16 sdbbp.
279 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
281 * v850-opc.c: Initialise processors field of v850_opcode structure.
284 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
286 Merge changes from Martin Hunt:
288 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
290 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
291 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
292 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
294 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
296 * d30v-dis.c (print_insn): First operand of d*i (delayed
297 branch) instructions is relative.
299 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
300 (d30v_operand_table): Add IMM6S3 type.
301 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
303 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
304 and cmp instructions.
306 * d30v-opc.c: Correct entries for repeat*, and sat*.
307 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
308 types. Correct several formats.
310 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
312 * d30v-opc.c (pre_defined_registers): Change control registers.
314 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
315 SHORT_C2. Manual was incorrect.
317 * d30v-dis.c (lookup_opcode): Return value now indicates
318 if an opcode has a short and a long form. Used for deciding
319 to append a ".s" or ".l".
320 (print_insn): Append a ".s" to an instruction if it is
321 the short form and ".l" if it is a long form. Do not append
322 anything if the instruction has only one possible size.
324 * d30v-opc.c: Change mulx2h to require an even register.
325 New form: SHORT_A2; a SHORT_A form that needs an even
326 register as the first operand.
328 * d30v-dis.c (print_insn_d30v): Fix problem where the last
329 instruction was not being disassembled if there were an odd
330 number of instructions.
332 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
336 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
338 * v850-dis.c (disassemble): Improved display of register lists.
341 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
343 * sparc-opc.c (sparc_opcodes): Fix assembler args to
344 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
345 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
346 fandnot1s, fandnot2s.
348 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
350 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
352 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
354 * cgen-asm.c (cgen_parse_address): New argument resultp.
356 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
358 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
360 * mn10200-dis.c (disassemble): PC relative instructions are
361 relative to the next instruction, not the current instruction.
363 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
365 * v850-dis.c (disassemble): Only signed extend values that are not
366 returned by extract functions.
367 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
369 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
371 * v850-opc.c: Update comments. Remove use of
372 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
374 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
376 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
378 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
380 * configure: Rebuilt with latest devo autoconf for NT support.
382 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
384 * v850-dis.c (disassemble): Use curly brace syntax for register
387 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
388 where r0 is being used as a destination register.
391 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
393 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
397 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
399 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
400 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
401 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
402 Add insns to access SGR and DBR.
403 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
406 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
408 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
411 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
413 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
414 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
417 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
419 * configure (cgen_files): Add support for v850e target.
420 * configure.in (cgen_files): Add support for v850e target.
422 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
424 * configure (cgen_files): Add support for v850ea target.
425 * configure.in (cgen_files): Add support for v850ea target.
428 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
430 * configure.in (bfd_arc_arch): Add.
431 * configure: Rebuild.
432 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
433 * Makefile.in: Rebuild.
434 * arc-dis.c, arc-opc.c: New files.
435 * disassemble.c (ARCH_all): Define ARCH_arc.
436 (disassembler): Add ARC support.
438 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
441 * v850-dis.c (disassemble): Add support for v850EA instructions.
443 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
444 (v850_opcodes): Add v850EA instructions.
446 * v850-dis.c (disassemble): Add support for v850E instructions.
448 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
449 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
450 insert_spe, extract_spe): New Functions.
451 (v850_opcodes): Add v850E instructions.
454 * v850-opc.c: Reorganised and re-layed out to improve readability
457 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
459 * configure: Rebuild with autoconf 2.12.1.
461 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
463 * aclocal.m4, configure: Rebuild with new automake patches.
465 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
467 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
468 * acinclude.m4: Just include acinclude.m4 from BFD.
469 * aclocal.m4, configure: Rebuild.
471 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
473 * Makefile.am: New file, based on old Makefile.in.
474 * acconfig.h: New file.
475 * acinclude.m4: New file.
476 * stamp-h.in: New file.
477 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
478 Removed shared library handling; now handled by libtool. Replace
479 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
480 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
481 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
482 handling in AC_OUTPUT.
483 * dep-in.sed: Change .o to .lo.
484 * Makefile.in: Now built with automake.
485 * aclocal.m4: Now built with aclocal.
486 * config.in, configure: Rebuild.
488 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
490 * mips-opc.c: Fix typo/thinko in "eret" instruction.
493 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
495 * mips-opc.c: Fix coding of mtsa.
498 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
500 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
502 * sparc-dis.c (sorted_opcodes): New static local.
503 (struct opcode_hash): `opcode' is pointer to const element.
504 (build_hash): First arg is now table of sorted pointers.
505 (print_insn_sparc): Sort opcodes by sorting table of pointers.
506 (compare_opcodes): Update.
508 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
510 * cgen-opc.c: #include <ctype.h>.
511 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
512 Handle case insensitive hashing.
513 (hash_keyword_value): Change type of `value' to unsigned int.
515 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
517 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
518 precision FP, mark it as such. Likewise for double precision
519 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
522 (mips_builtin_opcodes): Remove non-existant r5900 instructions
526 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
528 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
529 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
532 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
534 * ppc-opc.c (extract_nsi): make unsigned expression signed before
536 (UNUSED): remove one level of parens, so MSVC doesn't choke on
537 nesting depth when all the macros are expanded.
539 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
541 * sparc-opc.c: The fcmp v9a instructions take an integer register
542 as a destination, not a floating point register. From Christian
543 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
545 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
547 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
548 syntax. From Roman Hodek
549 <rnhodek@faui22c.informatik.uni-erlangen.de>.
551 * i386-dis.c (twobyte_has_modrm): Fix pand.
553 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
555 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
557 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
559 * arm-dis.c: Add prototypes for arm_decode_shift and
562 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
564 * mips-opc.c: Add r3900 insns.
566 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
568 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
569 print delay slot instructions on the same line. When using a PC
570 relative load, add a comment with the value being loaded if it can
573 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
575 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
576 to pushS/popS for segment regs and byte constant so that
577 pushw/popw printed when in 16 bit data mode.
579 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
580 print cbtw, cwtd in 16 bit data mode.
581 * i386-dis.c (putop): extra case W to support above.
583 * i386-dis.c (print_insn_x86): print addr32 prefix when given
584 address size prefix in 16 bit address mode.
586 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
588 * sh-dis.c: Reindent. Rename local variable fprintf to
591 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
593 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
595 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
597 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
599 * mips16-opc.c (mip16_opcodes): same.
601 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
603 * m68k-opc.c (moveb): Change $d to %d.
605 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
607 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
608 (twobyte_has_modrm): Likewise.
610 (OP_MMX, OP_EM, OP_MS): New static functions.
612 * i386-dis.c: Revert patch of April 4. The output now matches
615 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
617 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
620 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
622 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
624 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
626 * Makefile.in (install): Depend upon installdirs.
627 (installdirs): New target.
629 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
631 From Thomas Graichen <graichen@rzpd.de>:
632 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
633 * configure: Rebuild.
635 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
637 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
638 Delete string{,s}.h support.
640 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
642 * cgen-asm.c (cgen_parse_operand_fn): New global.
643 (cgen_parse_{{,un}signed_integer,address}): Update call to
644 cgen_parse_operand_fn.
645 (cgen_init_parse_operand): New function.
646 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
647 from cgen_asm_init_parse.
648 (m32r_cgen_assemble_insn): New operand `errmsg'.
649 Delete call to as_bad, return error message to caller.
650 (m32r_cgen_asm_hash_keywords): #if 0 out.
652 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
654 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
656 [case 'J']: Fix typo in register name.
658 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
660 * configure.in: Substitute SHLIB_LIBS.
661 * configure: Rebuild.
662 * Makefile.in (SHLIB_LIBS): New variable.
663 ($(SHLIB)): Use $(SHLIB_LIBS).
665 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
667 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
669 * cgen-opc.c (hash_keyword_name): Improve algorithm.
671 * disassemble.c (disassembler): Handle m32r.
673 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
675 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
676 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
677 * Makefile.in (CFILES): Add them.
678 (ALL_MACHINES): Add them.
679 (dependencies): Regenerate.
680 * configure.in (cgen_files): New variable.
681 (bfd_m32r_arch): Add entry.
682 * configure: Regenerate.
684 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
686 * configure.in: Correct file names for bfd_mn10[23]00_arch.
687 * configure: Rebuild.
689 * Makefile.in: Rebuild dependencies.
691 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
693 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
696 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
698 * Branched binutils 2.8.
700 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
702 * m10200-dis.c: Rename from mn10200-dis.c.
703 * m10200-opc.c: Rename from mn10200-opc.c.
704 * m10300-dis.c: Rename from mn10300-dis.c
705 * m10300-opc.c: Rename from mn10300-opc.c.
706 * Makefile.in: Update accordingly.
708 * mips16-opc.c: Add mul and dmul macros.
710 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
712 * makefile.vms: Update CFLAGS, add clean target.
714 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
716 * mips-opc.c: Add "wait". From Ralf Baechle
717 <ralf@gnu.ai.mit.edu>.
719 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
720 * configure, config.in: Rebuild.
721 * sysdep.h: Include <stdlib.h> if it exists.
722 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
724 * Makefile.in: Rebuild dependencies.
726 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
728 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
729 Andrew Bray <andy@madhouse.demon.co.uk>.
731 * mips-opc.c: Add cast when setting mips_opcodes.
733 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
735 * v850-dis.c (disassemble): Fix sign extension problem.
736 * v850-opc.c (extract_d*): Fix sign extension problems to make
737 disassembly calculate branch offsets correctly.
739 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
741 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
743 * mips-opc.c: Add dctr and dctw.
746 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
748 * d30v-dis.c (print_insn): Change the way signed constants
751 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
753 * Makefile.in (BFD_H): New variable.
754 (HFILES): New variable.
755 (CFILES): Add all C files.
756 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
757 Delete old dependencies, and build new ones.
758 * dep-in.sed: New file.
760 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
762 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
764 start-sanitize-coldfire
765 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
767 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
770 end-sanitize-coldfire
771 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
773 * mn10200-opc.c: Change "trap" to "syscall".
774 * mn10300-opc.c: Add new "syscall" instruction.
776 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
778 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
779 mulul insns on the coldfire.
781 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
783 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
784 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
785 (print_insn_little_arm): Likewise.
787 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
789 Based on patches from H.J. Lu <hjl@lucon.org>:
790 * i386-dis.c (fetch_data): Add prototype.
791 * m68k-dis.c (fetch_data): Add prototype.
792 (dummy_print_address): Add prototype. Make static.
793 * ppc-opc.c (valid_bo): Add prototype.
794 * sparc-dis.c (build_hash_table): Add prototype.
795 (is_delayed_branch, compute_arch_mask): Add prototypes.
796 (print_insn_sparc): Make several local variables const.
797 (compare_opcodes): Change arguments to const PTR. Add prototype.
798 * sparc-opc.c (arg): Change name field to be const.
799 (lookup_name, lookup_value): Add prototypes. Change table and
800 name parameters to be const.
801 (sparc_encode_asi): Change name parameter to be const.
802 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
803 (sparc_encode_sparclet_cpreg): Likewise.
804 (sparc_decode_asi): Change return type to be const.
805 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
806 (sparc_decode_sparclet_cpreg): Likewise.
808 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
810 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
811 Solaris doesn't like the combined options, and the -f is
813 (stamp-tshlink, install): Likewise.
815 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
817 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
820 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
822 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
824 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
826 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
829 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
831 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
834 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
836 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
838 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
840 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
843 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
845 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
846 floatformat_to_double to make portable.
847 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
850 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
852 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
853 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
855 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
857 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
858 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
861 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
863 * tic80-opc.c (LSI_SCALED): Renamed from this ...
864 (OFF_SL_BR_SCALED): ... to this, and added the flag
865 TIC80_OPERAND_BASEREL to the flags word.
866 (tic80_opcodes): Replace all occurances of LSI_SCALED with
870 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
872 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
873 Change mips_opcodes from const array to a pointer,
874 and change bfd_mips_num_opcodes from const int to int,
875 so that we can increase the size of the mips opcodes table
879 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
881 * tic80-opc.c (tic80_predefined_symbols): Revert change to
882 store BITNUM values in the table in one's complement form
883 to match behavior when assembler is given a raw numeric
884 value for a BITNUM operand.
885 * tic80-dis.c (print_operand_bitnum): Ditto.
889 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
891 * d30v-opc.c: Removed references to FLAG_X.
894 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
896 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
899 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
901 * Makefile.in: Added d30v object files.
902 * configure: (bfd_d30v_arch) Rebuilt.
903 * configure.in: (bfd_d30v_arch) Added new case.
904 * d30v-dis.c: New file.
905 * d30v-opc.c: New file.
906 * disassemble.c (disassembler) Add entry for d30v.
910 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
912 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
913 representations for the floating point BITNUM values.
915 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
917 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
918 in the table in one's complement form, as they appear in the
920 (tic80_symbol_to_value): Use macros to access predefined
922 (tic80_value_to_symbol): Ditto.
923 (tic80_next_predefined_symbol): New function.
924 * tic80-dis.c (print_operand_bitnum): Remove code that did
925 one's complement for BITNUM values.
929 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
931 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
934 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
936 * makefile.vms: Remove 8 bit characters. Update to latest
939 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
941 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
943 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
945 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
946 (IMM24_PCREL): Likewise.
948 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
950 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
951 address for an extended PC relative instruction that is not a
954 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
956 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
960 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
962 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
963 (tic80_opcodes): Sort entries so that long immediate forms
964 come after short immediate forms, making it easier for
965 assembler to select the right one for a given operand.
968 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
970 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
972 (print_insn_mips16): Likewise.
975 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
977 * mips-opc.c: add r5900.
981 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
983 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
984 a symbol class that restricts translation to just that
985 class (general register, condition code, etc).
987 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
989 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
990 and REG_DEST_E for register operands that have to be
991 an even numbered register. Add REG_FPA for operands that
992 are one of the floating point accumulator registers.
993 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
994 (tic80_opcodes): Change entries that need even numbered
995 register operands to use the new operand table entries.
996 Add "or" entries that are identical to "or.tt" entries.
999 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1001 * mips16-opc.c: Add new cases of exit instruction for
1003 * mips-dis.c (print_mips16_insn_arg): Display floating point
1004 registers in operands of exit instruction. Print `$' before
1005 register names in operands of entry and exit instructions.
1007 start-sanitize-tic80
1008 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1010 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1011 pairs for all predefined symbols recognized by the assembler.
1012 Also used by the disassembling routines.
1013 (tic80_symbol_to_value): New function.
1014 (tic80_value_to_symbol): New function.
1015 * tic80-dis.c (print_operand_control_register,
1016 print_operand_condition_code, print_operand_bitnum):
1017 Remove private tables and use tic80_value_to_symbol function.
1020 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1022 * d10v-dis.c (print_operand): Change address printing
1023 to correctly handle PC wrapping. Fixes PR11490.
1025 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1027 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1030 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1032 * mips-dis.c (print_insn_mips16): Set insn_info information.
1033 (print_mips16_insn_arg): Likewise.
1035 * mips-dis.c (print_insn_mips16): Better handling of an extend
1036 opcode followed by an instruction which can not be extended.
1038 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1040 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1041 coldfire moveb instruction to not allow an address register as
1042 destination. Although the documentation does not indicate that
1043 this is invalid, experiments uncovered unexpected behavior.
1044 Added a comment explaining the situation. Thanks to Andreas
1045 Schwab for pointing this out to me.
1047 start-sanitize-tic80
1048 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1050 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1051 entries are presorted so that entries with the same mnemonic are
1052 adjacent to each other in the table. Sort the entries for each
1053 instruction so that this is true.
1056 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1058 * m68k-dis.c: Include <libiberty.h>.
1059 (print_insn_m68k): Sort the opcode table on the most significant
1060 nibble of the opcode.
1062 start-sanitize-tic80
1063 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1065 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1066 "vsub", "vst", "xnor", and "xor" instructions.
1067 (V_a1): Renamed from V_a, msb of accumulator reg number.
1068 (V_a0): Add macro, lsb of accumulator reg number.
1070 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1072 * tic80-dis.c (print_insn_tic80): Broke excessively long
1073 function up into several smaller ones and arranged for
1074 the instruction printing function to be callable recursively
1075 to print vector instructions that have both a load and a
1076 math instruction packed into a single opcode.
1077 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1078 to explain why it comes after the other vector opcodes.
1081 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1083 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1084 move insns to handle immediate operands.
1086 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1088 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1089 fix operand mask in the "moveml" entries for the coldfire.
1091 start-sanitize-tic80
1092 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1094 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1095 New macros for building vector instruction opcodes.
1096 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1097 FMT_LI, which were unused. The field is now a flags field.
1098 Remove some opcodes that are possible, but illegal, such
1099 as long immediate instructions with doubles for immediate
1100 values. Add "vadd" and "vld" instructions.
1102 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1104 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1105 the order more logical. Move the shift alias instructions ("rotl",
1106 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1107 interspersed with the regular sr.x and sl.x instructions. Add
1108 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1109 "sub", "subu", "swcr", and "trap".
1111 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1113 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1114 (OFF_SL_PC): Renamed from OFF_SL.
1115 (OFF_SS_BR): New operand type for base relative operand.
1116 (OFF_SL_BR): New operand type for base relative operand.
1117 (REG_BASE): New operand type for base register operand.
1118 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1119 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1120 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1122 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1123 10 char field, padded with spaces on rhs, rather than a string
1124 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1125 than old TIC80_OPERAND_RELATIVE. Add support for new
1126 TIC80_OPERAND_BASEREL flag bit.
1128 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1130 * tic80-dis.c (print_insn_tic80): Print floating point operands
1132 * tic80-opc.c (SPFI): Add single precision floating point
1133 immediate operand type.
1134 (ROTATE): Add rotate operand type for shifts.
1135 (ENDMASK): Add for shifts.
1136 (n): Macro for the 'n' bit.
1137 (i): Macro for the 'i' bit.
1138 (PD): Macro for the 'PD' field.
1139 (P2): Macro for the 'P2' field.
1140 (P1): Macro for the 'P1' field.
1141 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1145 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1147 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1148 adding in current address for pc-relative operands.
1150 start-sanitize-tic80
1151 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1153 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1154 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1155 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1156 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1157 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1158 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1159 (REG_SCALED, LSI_SCALED): New operand types.
1160 (E): New macro for 'E' bit at bit 27.
1161 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1162 opcodes, including the various size flavors (b,h,w,d) for
1163 the direct load and store instructions.
1165 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1167 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1169 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1170 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1171 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1172 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1173 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1174 masks with "MASK_* & ~M_*" to get the M bit reset.
1175 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1177 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1179 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1180 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1181 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1183 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1184 CC, SICR, and LICR table entries.
1185 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1186 "bcnd", and "brcr" opcodes.
1189 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1191 * ppc-opc.c (powerpc_operands): Make comment match the
1192 actual fields (no shift field).
1193 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1194 start-sanitize-tic80
1195 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1196 partial implementation, work in progress.
1197 * tic80-opc.c (tic80_operands): Begin construction operands table.
1198 (tic80_opcodes): Continue populating opcodes table and start
1199 filling in the operand indices.
1200 (tic80_num_opcodes): Add this.
1203 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1205 * m68k-opc.c: Add #B case for moveq.
1207 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1209 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1210 before they are used.
1212 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1214 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1215 for "breakpoint" instruction.
1217 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1219 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1220 (dep): Use ALL_CFLAGS rather than CFLAGS.
1222 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1224 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1227 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1229 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1230 start-sanitize-tic80
1231 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1234 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1236 * mips16-opc.c: Add "abs".
1238 start-sanitize-tic80
1239 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1241 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1242 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1243 (disassembler): Add bfd_arch_tic80 support to set disassemble
1244 to print_insn_tic80.
1245 * tic80-dis.c (print_insn_tic80): Add stub.
1247 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1249 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1250 * configure: Regenerate with autoconf.
1251 * tic80-dis.c: Add file.
1252 * tic80-opc.c: Add file.
1255 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1257 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1259 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1261 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1262 (mn10200_opcodes): Use it for some logicals and btst insns.
1263 Add "break" and "trap" instructions.
1265 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1267 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1269 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1271 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1272 relative load or add now depends upon whether the instruction is
1275 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1277 * mn10200-dis.c: Finish writing disassembler.
1278 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1279 Fix mask for "jmp (an)".
1281 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1282 handle endianness issues for mn10300.
1284 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1286 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1288 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1289 instruction. Fix opcode field for "movb (imm24),dn".
1291 * mn10200-opc.c (mn10200_operands): Fix insertion position
1294 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1296 * mn10200-opc.c: Create mn10200 opcode table.
1297 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1298 but moving along nicely.
1300 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1302 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1304 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1306 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1307 specifiers for fmovem* instructions.
1309 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1311 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1313 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1315 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1318 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1320 * mn10300-opc.c: Add some comments explaining the various
1323 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1325 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1327 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1330 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1331 operand specifiers in fmovm* instructions.
1333 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1335 * ppc-opc.c (insert_li): Give an error if the offset has the two
1336 least significant bits set.
1338 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1340 * mips-dis.c (print_insn_mips16): Separate the instruction from
1341 the arguments with a tab, not a space.
1343 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1345 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1348 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1351 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1353 * configure: Rebuild with autoconf 2.12.
1355 Add support for mips16 (16 bit MIPS implementation):
1356 * mips16-opc.c: New file.
1357 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1358 (mips16_reg_names): New static array.
1359 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1360 after seeing a 16 bit symbol.
1361 (print_insn_little_mips): Likewise.
1362 (print_insn_mips16): New static function.
1363 (print_mips16_insn_arg): New static function.
1364 * mips-opc.c: Add jalx instruction.
1365 * Makefile.in (mips16-opc.o): New target.
1366 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1367 * configure: Rebuild.
1369 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1371 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1372 operand specifiers in *save, *restore and movem* instructions.
1374 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1377 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1378 register operands for immediate arithmetic, not, neg, negx, and
1379 set according to condition instructions.
1381 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1382 specifier of the effective-address operand in immediate forms of
1383 arithmetic instructions. The specifier for the immediate operand
1384 notes how and where the constant will be stored.
1386 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1388 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1391 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1394 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1396 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1398 * mn10300-dis.c (disassemble): Handle register lists.
1400 * mn10300-opc.c: Fix handling of register list operand for
1401 "call", "ret", and "rets" instructions.
1403 * mn10300-dis.c (disassemble): Print PC-relative and memory
1404 addresses symbolically if possible.
1405 * mn10300-opc.c: Distinguish between absolute memory addresses,
1406 pc-relative offsets & random immediates.
1408 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1410 (disassemble): Handle SPLIT and EXTENDED operands.
1412 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1414 * mn10300-dis.c: Rough cut at printing some operands.
1416 * mn10300-dis.c: Start working on disassembler support.
1417 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1419 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1421 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1423 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1425 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1427 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1429 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1430 register argument is calls and jmp instructions.
1432 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1434 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1435 getx operand. Fix opcode for mulqu imm,dn.
1437 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1439 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1440 in MN10300_OPERAND_SPLIT operands for how many bits
1441 appear in the basic insn word. Add IMM32_HIGH24,
1442 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1443 (mn10300_opcodes): Use new operands as needed.
1445 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1446 for bset, bclr, btst instructions.
1447 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1449 * mn10300-opc.c (mn10300_operands): Remove many redundant
1450 operands. Update opcode table as appropriate.
1451 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1452 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1454 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1456 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1457 operands (for indexed load/stores). Fix bitpos for DI
1458 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1459 few instructions that insert immediates/displacements in the
1460 middle of the instruction. Add IMM8E for 8 bit immediate in
1461 the extended part of an instruction.
1462 (mn10300_operands): Use new opcodes as appropriate.
1464 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1466 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1467 sequential so the assembler never parallelizes it with
1470 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1472 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1473 a data/address register that appears in register field 0
1474 and register field 1.
1475 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1477 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1479 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1480 standard disassembly.
1482 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1483 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1484 Recategorize PALcode instructions.
1486 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1488 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1490 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1492 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1493 there are no operand types.
1495 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1497 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1499 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1501 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1503 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1505 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1507 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1508 and sst.w instructions.
1510 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1513 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1515 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1518 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1520 * ppc-opc.c (PPCPWR2): Define.
1521 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1524 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1526 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1527 field for movhu instruction.
1529 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1530 cast value to "long" not "signed long" to keep hpux10
1533 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1535 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1538 * mn10300-opc.c (FMT*): Remove definitions.
1540 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1541 for shift-by-register opcodes.
1543 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1544 into [AD][MN][01] for encoding the position of the register
1547 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1549 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1550 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1552 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1554 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1555 Fix various typos. Add "PAREN" operand.
1556 (MEM, MEM2): Define.
1557 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1558 operands. Fix several typos.
1560 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1563 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1565 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1566 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1568 (mn10300_opcodes): Break opcode format out into its own field.
1569 Update many operand fields to deal with signed vs unsigned
1570 issues. Fix one or two typos in the "mov" instruction
1571 opcode, mask and/or operand fields.
1573 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1575 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1576 m68851 wasn't reset.
1578 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1580 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1581 all opcodes. Very rough cut at operands for all opcodes.
1583 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1586 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1588 * mn10200-opc.c, mn10300-opc.c: New files.
1589 * mn10200-dis.c, mn10300-dis.c: New files.
1590 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1591 * disassemble.c: Break mn10x00 support into 10200 and 10300
1593 * configure.in: Likewise.
1594 * configure: Rebuilt.
1596 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1598 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1600 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1602 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1604 * disassemble (ARCH_mn10x00): Define.
1605 (disassembler): Handle bfd_arch_mn10x00.
1606 * configure.in: Recognize bfd_mn10x00_arch.
1607 * configure: Rebuilt.
1609 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1611 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1612 accordingly. Don't declare functions using op_rtn.
1614 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1616 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1617 params to be more standard.
1618 * (disassemble): Print absolute addresses and symbolic names for
1619 branch and jump targets.
1620 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1622 * (v850_opcodes): Add breakpoint insn.
1624 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1626 * m68k-opc.c: Move the fmovemx data register cases before the
1627 other cases, so that they get recognized before the data register
1628 does gets treated as a degenerate register list.
1630 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1632 * mips-opc.c: Add a case for "div" and "divu" with two registers
1633 and a destination of $0.
1635 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1637 * mips-dis.c (print_insn_arg): Add prototype.
1638 (_print_insn_mips): Ditto.
1640 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1642 * mips-dis.c (print_insn_arg): Print condition code registers as
1645 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1647 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1649 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1651 * v850-dis.c (disassemble): Make static. Provide prototype.
1653 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1655 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1658 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1660 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1661 ']' characters into the output stream.
1662 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1663 Add "memop" field to all opcodes (for the disassembler).
1664 Reorder opcodes so that "nop" comes before "mov" and "jr"
1665 comes before "jarl".
1667 * v850-dis.c (print_insn_v850): Fix typo in last change.
1669 * v850-dis.c (print_insn_v850): Properly handle disassembling
1670 a two byte insn at the end of a memory region when the memory
1671 region's size is only two byte aligned.
1673 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1675 * v850-dis.c (v850_reg_names): Define.
1676 (v850_sreg_names, v850_cc_names): Likewise.
1677 (disassemble): Very rough cut at printing operands (unformatted).
1679 * v850-opc.c (BOP_MASK): Fix.
1680 (v850_opcodes): Fix mask for jarl and jr.
1682 * v850-dis.c: New file. Skeleton for disassembler support.
1683 * Makefile.in Remove v850 references, they're not needed here.
1684 * configure.in: Add v850-dis.o when building v850 toolchains.
1685 * configure: Rebuilt.
1686 * disassemble.c (disassembler): Call v850 disassembler.
1688 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1689 (insert_d8_6, extract_d8_6): New functions.
1690 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1691 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1693 (IF4A, IF4B): Use "D7" instead of "D7S".
1694 (IF4C, IF4D): Use "D8_7" instead of "D8".
1695 (IF4E, IF4F): New. Use "D8_6".
1696 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1697 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1699 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1700 (v850_operands): Change D16 to D16_15, use special insert/extract
1701 routines. New new D16 that uses the generic insert/extract code.
1702 (IF7A, IF7B): Use D16_15.
1703 (IF7C, IF7D): New. Use D16.
1704 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1706 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1707 message. Issue an error if the branch offset is odd.
1709 * v850-opc.c: Add notes about needing special insert/extract
1710 for all the load/store insns, except "ld.b" and "st.b".
1712 * v850-opc.c (insert_d22, extract_d22): New functions.
1713 (v850_operands): Use insert_d22 and extract_d22 for
1715 (insert_d9): Fix range check.
1717 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1719 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1720 and set bits field to D9 and D22 operands.
1722 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1724 * v850-opc.c (v850_operands): Define SR2 operand.
1725 (v850_opcodes): "ldsr" uses R1,SR2.
1727 * v850-opc.c (v850_opcodes): Fix opcode specs for
1728 sld.w, sst.b, sst.h, sst.w, and nop.
1730 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1732 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1733 end of the opcode table.
1735 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1737 * d10v-opc.c (pre_defined_registers): Added register pairs,
1738 "r0-r1", "r2-r3", etc.
1740 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1742 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1743 Create I16U for an unsigned 16bit mmediate operand.
1744 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1746 * v850-opc.c (v850_operands): Define EP operand.
1747 (IF4A, IF4B, IF4C, IF4D): Use EP.
1749 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1750 with immediate operand, "movhi". Tweak "ldsr".
1752 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1753 correct. Get sld.[bhw] and sst.[bhw] closer.
1755 * v850-opc.c (v850_operands): "not" is a two byte insn
1757 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1759 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1761 * v850-opc.c (two): Get order of words correct.
1763 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1765 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1766 register source and destination operands.
1767 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1769 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1770 same thinko in "trap" opcode.
1772 * v850-opc.c (v850_opcodes): Add initializer for size field
1775 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1776 Add D8 for 8-bit unsigned field in short load/store insns.
1777 (IF4A, IF4D): These both need two registers.
1778 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1779 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1780 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1781 for "ldsr" and "stsr".
1782 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1785 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1786 short store word (sst.w).
1788 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1790 * v850-opc.c (v850_operands): Added insert and extract fields,
1791 pointers to functions that handle unusual operand encodings.
1793 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1795 * v850-opc.c (v850_opcodes): Enable "trap".
1797 * v850-opc.c (v850_opcodes): Fix order of displacement
1798 and register for "set1", "clr1", "not1", and "tst1".
1800 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1802 * v850-opc.c (v850_operands): Add "B3" support.
1803 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1806 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1808 * v850-opc.c: Close unterminated comment.
1810 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1812 * v850-opc.c (v850_operands): Add flags field.
1813 (v850_opcodes): add move opcodes.
1815 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1817 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1818 * configure: (bfd_v850v_arch) Add new case.
1819 * configure.in: (bfd_v850_arch) Add new case.
1820 * v850-opc.c: New file.
1822 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1824 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1826 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1828 * d10v-opc.c: Add additional information to the opcode
1829 table to help determinine which instructions can be done
1832 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1834 * mpw-make.sed: Update editing of include pathnames to be
1837 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1839 * arm-opc.h: Added "bx" instruction definition.
1841 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1843 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1845 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1847 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1849 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1851 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1853 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1855 * makefile.vms: Update for alpha-opc changes.
1857 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1859 * i386-dis.c (print_insn_i386): Actually return the correct value.
1860 (ONE, OP_ONE): #ifdef out; not used.
1862 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1864 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1865 Changed subi operand type to treat 0 as 16.
1867 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1869 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1872 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1874 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1875 memory transfer instructions. Add new format string entries %h and %s.
1876 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1879 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1881 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1882 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1884 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1886 * alpha-dis.c (print_insn_alpha_osf): Remove.
1887 (print_insn_alpha_vms): Remove.
1888 (print_insn_alpha): Make globally visible. Chose the register
1889 names based on info->flavour.
1890 * disassemble.c: Always return print_insn_alpha for the alpha.
1892 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1894 * d10v-dis.c (dis_long): Handle unknown opcodes.
1896 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1898 * d10v-opc.c: Changes to support signed and unsigned numbers.
1899 All instructions with the same name that have long and short forms
1900 now end in ".l" or ".s". Divs added.
1901 * d10v-dis.c: Changes to support signed and unsigned numbers.
1903 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1905 * d10v-dis.c: Change all functions to use info->print_address_func.
1907 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1909 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1910 move ccr/sr insns more strict so that the disassembler only
1911 selects them when the addressing mode is data register.
1913 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1914 * d10v-opc.c (pre_defined_registers): Declare.
1915 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1916 to pick a better name for the registers.
1918 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1920 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1921 operands for fexpand and fpmerge. From Christian Kuehnke
1922 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1924 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1926 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1927 print routine. Take new regnames and cpumask arguments.
1928 Kill the environment variable nonsense.
1929 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1930 (print_insn_alpha_vms): New function. Do VMS style regnames.
1931 * disassemble.c (disassembler): Test bfd flavour to pick
1932 between OSF and VMS routines. Default to OSF.
1934 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1936 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1937 * configure: Rebuild.
1938 * Makefile.in (install): Use @INSTALL_SHLIB@.
1940 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1942 * configure: (bfd_d10v_arch) Add new case.
1943 * configure.in: (bfd_d10v_arch) Add new case.
1944 * d10v-dis.c: New file.
1945 * d10v-opc.c: New file.
1946 * disassemble.c (disassembler) Add entry for d10v.
1948 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1950 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1951 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1953 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1955 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1956 distinguish between variants of the instruction set.
1957 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1958 distinguish between variants of the instruction set.
1960 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1962 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1963 the 8086 instruction set.
1964 * i386-dis.c: General cleanups. Make most things static. Add
1965 prototypes. Get rid of static variables aflags and dflags. Pass
1966 them as args (to almost everything).
1968 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1970 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1972 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1974 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1975 if the next arg is marked with SRC_IN_DST. Gross.
1977 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1978 we're looking for and find EXR.
1980 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1981 if we're looking for KBIT and we don't find it.
1983 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1986 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1987 3bit immediate operands.
1989 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1991 * Released binutils 2.7.
1993 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1994 <kkaempf@progis.ac-net.de>.
1996 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1998 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2000 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2002 * sparc-dis.c (print_insn_sparclite): New routine to print
2003 sparclite instructions.
2005 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2007 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2009 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2011 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2012 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2013 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2015 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2017 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2018 Use autoconf-set values.
2019 (docdir, oldincludedir): Removed.
2020 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2022 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2024 * alpha-opc.c: New file.
2025 * alpha-opc.h: Remove.
2026 * alpha-dis.c: Complete rewrite to use new opcode table.
2027 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2028 * configure: Rebuild with autoconf 2.10.
2029 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2030 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2032 (alpha-opc.o): New target.
2034 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2036 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2037 Set imm_added_to_rs1 even if the source and destination register
2040 * sparc-opc.c: Add some two operand forms of the wr instruction.
2042 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2044 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2047 * disassemble.c (disassembler): Handle H8/S.
2048 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2050 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2052 * sparc-opc.c: Add beq/teq as aliases for be/te.
2054 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2055 <sergei@msil.sps.mot.com>.
2057 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2059 * makefile.vms: New file.
2061 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2063 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2065 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2068 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2070 * i386-dis.c (OP_OFF): Call append_prefix.
2072 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2074 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2075 unsigned long to silence a warning from the Solaris PowerPC
2078 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2080 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2082 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2084 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2086 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2087 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2088 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2089 cpush, cpusha, cpull sparclet insns.
2091 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2093 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2095 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2097 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2098 Set F_FLOAT on other floating point instructions.
2100 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2102 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2104 (powerpc_opcodes): Add 860/821 specific SPRs.
2106 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2108 * configure.in: Permit --enable-shared to specify a list of
2109 directories. Set and substitute BFD_PICLIST.
2110 * configure: Rebuild.
2111 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2112 uses. Set to @BFD_PICLIST@.
2114 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2116 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2117 not "abs", which may be needed for the absolute in something
2118 like btst #0,@10:8. Print L_3 immediates separately from other
2119 immediates. Change ABSMOV reference to ABS8MEM.
2121 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2123 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2124 (current_arch_mask): New static global.
2125 (compute_arch_mask): New static function.
2126 (print_insn_sparc): Delete sparc_v9_p. New static local
2127 current_mach. Resort opcode table if current_mach changes.
2128 Generalize "insn not supported" test.
2129 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2130 Delete test for v9/!v9.
2131 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2133 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2134 (brfcx): Renamed to FBRX.
2135 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2136 coprocessor mnemonics are not supported on the sparclet).
2137 (condf): Renamed to CONDF.
2138 (SLCBCC2): Delete F_ALIAS flag.
2140 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2142 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2143 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2145 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2147 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2148 that the shared library version number is set correctly.
2150 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2152 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2153 Miles Bader <miles@gnu.ai.mit.edu>.
2154 * configure: Rebuild.
2156 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2158 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2161 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2163 * configure: Rebuild with autoconf 2.8.
2165 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2167 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2168 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2170 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2172 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2173 since they appear as targets in Makefile.in.
2174 * configure: Rebuild.
2176 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2178 * mpw-make.sed: Edit out shared library support bits.
2180 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2182 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2183 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2184 (sparc_opcodes): Add sparclet insns.
2185 (sparclet_cpreg_table): New static local.
2186 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2187 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2189 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2191 * i386-dis.c (index16): New static variable.
2192 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2194 (OP_indirE): Return result of OP_E.
2195 (OP_E): Check for 16 bit addressing mode, and disassemble
2196 correctly. Optimised 32 bit case a little. Don't print
2197 "(base,index,scale)" when sib specifies only an offset.
2199 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2201 * configure.in: Set and substitute SHLIB_DEP.
2202 * configure: Rebuild.
2203 * Makefile.in (SHLIB_DEP): New variable.
2204 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2205 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2206 COMMON_SHLIB, add them to piclist with appropriate modifications.
2207 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2208 here: just use piclist.
2210 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2212 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2213 (print_insn_sparc): Rewrite v9/not-v9 tests.
2214 (compare_opcodes): Likewise.
2215 * sparc-opc.c (MASK_<ARCH>): Define.
2216 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2217 (sparclet,v6notv9): Define.
2218 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2219 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2221 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2223 * configure.in: Call AC_PROG_CC before configure.host.
2224 * configure: Rebuild.
2226 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2228 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2230 * i386-dis.c (onebyte_has_modrm): New static array.
2231 (twobyte_has_modrm): New static array.
2232 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2234 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2236 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2239 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2241 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2244 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2246 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2247 m68010up, not just m68020up | cpu32.
2249 * Makefile.in (SONAME): New variable.
2250 ($(SHLINK)): Make a link to the transformed name, as well.
2251 (stamp-tshlink): New target.
2252 (install): Skip stamp-tshlink during install.
2254 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2256 * configure.in: Call AC_ARG_PROGRAM.
2257 * configure: Rebuild.
2258 * Makefile.in (program_transform_name): New variable.
2259 (install): Transform library name before installing it.
2261 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2263 * i960-dis.c (mem): Add HX dcinva instruction.
2265 Support for building as a shared library, based on patches from
2266 Alan Modra <alan@spri.levels.unisa.edu.au>:
2267 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2268 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2269 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2270 * configure: Rebuild.
2271 * Makefile.in (ALLLIBS): New variable.
2272 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2273 (COMMON_SHLIB, SHLINK): New variables.
2274 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2275 (STAGESTUFF): Remove variable.
2276 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2277 (stamp-piclist, piclist): New targets.
2278 ($(SHLIB), $(SHLINK)): New targets.
2279 ($(OFILES)): Depend upon stamp-picdir.
2280 (disassemble.o): Build twice if PICFLAG is set.
2281 (MOSTLYCLEAN): Add pic/*.o.
2282 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2283 (distclean): Remove pic and stamp-picdir.
2284 (install): Install shared libraries.
2285 (stamp-picdir): New target.
2287 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2289 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2290 Print unknown instruction as "unknown", rather than in hex.
2292 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2294 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2296 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2298 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2300 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2302 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2303 when necessary. From Ulrich Drepper
2304 <drepper@myware.rz.uni-karlsruhe.de>.
2306 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2308 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2309 sparc_num_opcodes. Update architecture enum values.
2310 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2311 (sparc_opcode_lookup_arch): New function.
2312 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2313 (sparc_opcodes): Add v9a shutdown insn.
2315 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2317 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2318 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2320 (print_insn_sparc64): Deleted.
2321 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2324 * sparc-opc.c (architecture_pname): Add v9a.
2326 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2328 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2329 incorrectly defined as 0x16 when it should be 0x15.
2330 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2331 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2332 excb (exception barrier) which is defined in the Alpha
2333 Architecture Handbook version 2.
2334 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2335 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2336 disassembled as or, for example.
2338 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2340 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2341 (_print_insn_mips): Change i from int to unsigned int.
2343 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2345 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2346 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2348 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2350 * i386-dis.c: Added Pentium Pro instructions.
2352 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2354 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2357 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2359 * sh-opc.h (sh_nibble_type): Added REG_B.
2360 (sh_arg_type): Added A_REG_B.
2361 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2363 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2365 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2367 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2369 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2371 * Makefile.in (distclean): Remove stamp-h. From Ronald
2372 F. Guilmette <rfg@monkeys.com>.
2374 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2376 From David Mosberger-Tang <davidm@azstarnet.com>:
2377 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2380 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2382 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2383 (sh_table): Added many SH3 opcodes.
2384 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2386 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2388 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2389 (subco,subco.): Mark this PPC, not PPCCOM.
2391 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2393 * configure: Rebuild with autoconf 2.7.
2395 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2397 * configure: Rebuild with autoconf 2.6.
2399 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2401 * configure.in: Sort list of architectures. Accept but do nothing
2402 for alliant, convex, pyramid, romp, and tahoe.
2404 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2406 * a29k-dis.c (print_special): Change num to unsigned int.
2408 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2410 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2413 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2415 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2416 * configure: Rebuilt.
2418 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2420 * configure.in: Add case for bfd_i860_arch.
2421 * configure: Rebuild.
2423 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2425 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2426 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2427 (NEXTDOUBLE): Likewise.
2428 (print_insn_m68k): Don't match fmoveml if there is more than one
2429 register in the list.
2430 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2432 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2434 * m68k-opc.c: Use #W rather than #w.
2435 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2437 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2439 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2440 and likewise for all the dbxx opcodes.
2442 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2444 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2446 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2448 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2449 the VR4100 specific instructions to the mips_opcodes structure.
2451 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2453 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2454 ugly Metrowerks bug in CW6, is fixed in CW7.
2456 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2458 * ppc-opc.c (whole file): Add flags for common/any support.
2460 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2462 * Makefile.in (BISON): Remove macro.
2463 (FLAGS_TO_PASS): Remove BISON.
2465 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2467 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2469 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2470 instructions that take no args by looking at the match mask.
2471 (print_insn_arg): Always print "%" before register names.
2472 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2473 [case '_']: Don't print "@#" before address.
2474 [case 'J']: Use "%s" as format string, not register name.
2475 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2477 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2479 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2482 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2484 From David Mosberger-Tang <davidm@azstarnet.com>
2486 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2487 (alpha_insn_set): added definitions for VAX floating point
2488 instructions (Unix compilers don't generate these, but handcoded
2489 assembly might still use them).
2491 * alpha-dis.c (print_insn_alpha): added support for disassembling
2492 the miscellaneous instructions in the Alpha instruction set.
2494 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2496 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2497 no longer create sysdep.h, sed ppc-opc.c to work around a
2498 serious Metrowerks C bug.
2499 * mpw-make.in: Remove.
2500 * mpw-make.sed: New file, used by mpw-configure to edit
2501 Makefile.in into an MPW makefile.
2503 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2505 * Makefile.in (maintainer-clean): New synonym for realclean.
2507 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2509 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2510 which use '0', '1', and '2' instead. Specify the proper size for
2511 a pmove immediate operand. Correct the pmovefd patterns to be
2512 moves to a register, not from a register.
2513 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2515 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2517 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2518 %psr, %wim, %tbr as F_NOTV9.
2520 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2522 * Makefile.in (Makefile): Just rebuild Makefile when running
2524 (config.h, stamp-h): New targets.
2525 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2526 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2527 rebuilding config.h.
2528 * configure: Rebuild.
2530 * mips-opc.c: Change unaligned loads and stores with "t,A"
2531 operands to use "t,A(b)".
2533 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2535 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2537 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2539 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2540 until 3 instead of until 2.
2542 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2544 * Makefile.in (ALL_CFLAGS): Define.
2545 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2546 (MOSTLYCLEAN): Add config.log.
2547 (distclean): Don't remove config.log.
2548 * configure.in: Substitute HDEFINES.
2549 * configure: Rebuild.
2551 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2553 * sh-opc.h (sh_arg_type): Add F_FR0.
2554 (sh_table, case fmac): Add F_FR0 as first argument.
2556 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2558 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2560 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2562 * sparc-dis.c: Remove all references to NO_V9.
2564 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2566 * aclocal.m4: Just include ../bfd/aclocal.m4.
2567 * configure: Rebuild.
2569 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2571 * sparc-dis.c (X_DISP19): Define.
2572 (print_insn, case 'G'): Use it.
2573 (print_insn, case 'L'): Sign extend displacement.
2575 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2577 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2578 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2579 host_makefile_frag or frags.
2580 * aclocal.m4: New file.
2581 * configure: Rebuild.
2582 * Makefile.in (INSTALL): Set to @INSTALL@.
2583 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2584 (INSTALL_DATA): Set to @INSTALL_DATA@.
2586 (AR_FLAGS): Set to rc rather than qc.
2587 (CC): Define as @CC@.
2588 (CFLAGS): Set to @CFLAGS@.
2589 (@host_makefile_frag@): Remove.
2590 (config.status): Remove dependency upon @frags@.
2592 * configure.in: ../bfd/config.bfd now just sets shell variables.
2593 Use them rather than looking through target Makefile fragments.
2594 * configure: Rebuild.
2596 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2598 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2600 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2602 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2603 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2606 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2607 (lookup_{name,value}): New functions.
2608 (prefetch_table): New static local.
2609 (sparc_{encode,decode}_prefetch): New functions.
2610 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2612 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2614 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2617 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2619 * sh-dis.c: Correct comment on first line of file.
2621 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2623 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2625 * sparc-opc.c (asi, membar): New static locals.
2626 (sparc_{encode,decode}_{asi,membar}): New functions.
2627 (sparc_opcodes, membar insn): Fix.
2628 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2629 Support decoding of membar masks.
2632 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2634 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2636 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2638 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2639 and likewise for the other branches. Add bhs as an alias for bcc,
2640 and likewise for the size variants. Add dbhs as an alias for
2643 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2645 * sh-opc.h (FP sts instructions): Update to match reality.
2647 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2649 * m68k-dis.c: (fpcr_names): Add % before all register names.
2650 (reg_names): Likewise.
2651 (print_insn_arg): Don't explicitly print % before register names.
2652 Add % before register names in static array names. In case 'r',
2653 print data registers as `@(Dn)', not `Dn@'. When printing a
2654 memory address, don't print @# before it.
2655 (print_indexed): Change base_disp and outer_disp from int to
2656 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2657 syntax. Sign extend 8 byte displacement correctly.
2658 (print_base): Print using MIT syntax. Print zpc when appropriate.
2659 Change parameter disp from int to bfd_vma.
2661 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2664 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2666 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2667 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2668 * sh-opc.h (sh_arg_type): Add new operand types.
2669 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2671 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2673 * Makefile.in (distclean): Remove generated file config.h.
2675 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2677 * Makefile.in (distclean): Remove generated file config.h.
2679 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2681 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2683 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2685 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2686 rather than numopcodes. Use m68k_opcodes rather than removed
2687 opcode function. Don't check F_ALIAS.
2688 (print_insn_arg): Change first parameter to be const char *.
2689 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2690 (m68k-opc.o): New target.
2691 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2692 * configure: Rebuild.
2694 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2696 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2697 (opcode_bits, opcode_hash_table): New variables.
2698 (opcodes_initialized): Renamed from opcodes_sorted.
2699 (build_hash_table): New function.
2700 (is_delayed_branch): Use hash table.
2701 (print_insn): Renamed from print_insn_sparc, made static.
2702 Build and use hash table. If !sparc64, ignore sparc64 insns,
2703 and vice-versa if sparc64.
2704 (print_insn_sparc, print_insn_sparc64): New functions.
2705 (compare_opcodes): Move sparc64 opcodes to end.
2706 Print commutative insns with constant second.
2707 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2709 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2711 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2712 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2713 avoids printing a delay slot in a delay slot.
2714 * sh-opc.h (sh_table): Fully bracket last entry.
2716 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2718 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2720 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2722 * configure.in: Get host_makefile_frag from ${srcdir}.
2724 * configure.in: Autoconfiscated. Check for string[s].h. Create
2725 config.h from config.in. Don't set up sysdep.h link.
2726 * sysdep.h: New file.
2727 * configure, config.in: New files, generated from configure.in.
2728 * Makefile.in: Updated to be processed autoconf-style.
2729 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2730 (Makefile): Depend on config.status.
2731 (config.status): New rule.
2732 * configure.bat: Update Makefile substitutions.
2734 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2736 * mips-opc.c (L1): Define.
2737 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2738 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2741 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2743 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2744 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2745 have multiple add units but only a single logical unit.
2747 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2748 shifted by 18, without any insertion or extraction function.
2749 (insert_cr, extract_cr): Remove.
2751 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2753 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2756 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2758 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2759 * sh-opc.h: Add copyright.
2761 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2763 * Makefile.in (crunch-m68k): Delete extra target accidentally
2764 checked in a while ago.
2766 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2768 * sh-opc.h (sh_table): Add SH3 support.
2770 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2772 * sh-opc.h: Added bsrf and braf.
2774 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2776 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2777 bogus [ls]fm{ea,fd} patterns.
2779 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2780 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2781 initialize it from memory. Make function static.
2782 (print_insn_{big,little}_arm): New functions.
2783 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2784 the correct endianness.
2786 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2788 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2791 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2793 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2794 17th, so that it builds again using GCC as the compiler.
2796 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2798 * mips-dis.c (print_insn_little_mips): Cast return value from
2799 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2800 expects an unsigned long, and that might be fewer words of
2801 argument storage (e.g., if bfd_vma is long long on a 32-bit
2803 (print_insn_big_mips): Likewise with bfd_getb32 value.
2804 (_print_insn_mips): Now static.
2806 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2808 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2809 gcc memory hog problem with initializer is fixed.
2811 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2813 Merge in support for Mac MPW as a host.
2814 (Old change descriptions retained for informational value.)
2816 * mpw-config.in (archname): Compute from the config.
2817 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2819 * mpw-config.in (target_arch): Compute from canonical target.
2820 (m68k, mips, powerpc, sparc): Add architectures.
2821 * mpw-make.in (disassemble.c.o): Add.
2822 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2824 * mpw-config.in (BFD_MACHINES): Set to a default value.
2825 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2827 * mpw-make.in (CSEARCH): Add extra-include to search path.
2829 * mpw-config.in (varargs.h): Don't create.
2830 (sysdep.h): Create using forward-include.
2831 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2833 * mpw-config.in: New file, MPW version of configure.in.
2834 * mpw-make.in: New file, MPW version of Makefile.in.
2836 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2838 * alpha-dis.c (print_insn_alpha): Put empty statement after
2841 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2843 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2844 (low_sign_extend): Likewise.
2845 (get_field): Delete unused function.
2846 (set_field, deposit_14, deposit_21): Likewise.
2848 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2850 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2853 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2855 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2857 * alpha-opc.h (OSF_ASMCODE): define
2858 print pal-code names as defined in App C of the
2859 Alpha Architecture Reference Manual
2861 * alpha-dis.c: cleaned up output
2862 print stylized code forms as defined in App A.4.3 of the
2863 Alpha Architecture Reference Manual
2865 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2867 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2869 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2872 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2874 * m68k-dis.c (opcode): New function. Returns address of opcode
2875 table entry given index, even if the opcode table was split to
2876 work around gcc bugs.
2877 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2879 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2880 (reg_names): Now const.
2881 (print_insn_arg): Arrays cacheFieldName and names now const.
2882 (print_indexed): Array scales now const.
2884 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2886 * ppc-opc.c: Sort recently added instructions by minor opcode
2887 number within major opcode number.
2889 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2891 * hppa-dis.c: Include libhppa.h.
2893 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2895 * mips-opc.c: Change dli to use M_DLI, and add dla.
2897 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2899 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2901 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2903 * mips-opc.c: Add r4650 mul instruction.
2905 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2907 * mips-opc.c: Add uld and usd macros for unaligned double load and
2910 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2912 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2913 mfdcr, mtdcr, icbt, iccci.
2915 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2917 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2918 signed char fields to shorts, more portable.
2920 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2922 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2923 char fields as signed chars, since they may have negative values.
2925 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2927 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2928 (mycroft@netbsd.org).
2930 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2932 From "Logg, Ed" <elogg@ea.com>:
2933 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2934 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2937 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2939 * ppc-opc.c: Changes based on patch from David Edelsohn
2940 <edelsohn@mhpcc.edu>.
2941 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2944 (insert_tbr): New static function.
2945 (extract_tbr): New static function.
2946 (XFXFXM_MASK, XFXM): Define.
2947 (XSPRBAT_MASK, XSPRG_MASK): Define.
2948 (powerpc_opcodes): Add instructions to access special registers by
2949 name. Add mtcr and mftbu.
2951 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2953 * mips-opc.c (P3): Define.
2954 (mips_opcodes): Add mad and madu.
2956 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2958 * configure.in: Add W65 support.
2959 * disassemble.c: Likewise.
2960 * w65-opc.h, w65-dis.c: New files.
2962 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2964 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2967 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2969 * mips-opc.c: Add dli as a synonym for li.
2971 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2973 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2974 print something for reserved opcode values, even if it won't
2977 * mips-dis.c (_print_insn_mips): When initializing, shift right
2978 and mask, to avoid sign extension problems on the Alpha.
2980 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2983 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2985 * sh-opc.h (mov.l gbr): Get direction right.
2986 * sh-dis.c (print_insn_shx): New function.
2987 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2988 print opcodes with right byte order.
2990 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2992 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2993 to avoid conflicts with getopt.
2995 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2997 * hppa-dis.c (print_insn_hppa): Read the instruction using
2998 bfd_getb32, so that it works on a little endian or 64 bit host.
2999 Remove unused local variable op.
3001 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3003 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3004 addu does not work correctly if -mips3.
3006 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3008 * a29k-dis.c (print_special): Add special register names defined
3009 on 29030, 29040 and 29050.
3010 (print_insn): Handle new operand type 'I'.
3012 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3014 * Makefile.in (INSTALL): Use top level install.sh script.
3016 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3018 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3019 that it works on a little endian host.
3021 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3023 * configure.in: Use ${config_shell} when running config.bfd.
3025 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3027 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3029 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3031 * a29k-dis.c (print_insn): Print the opcode.
3033 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3035 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3037 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3039 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3041 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3043 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3044 which store a value into memory.
3046 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3048 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3049 * arm-dis.c, arm-opc.h: New files.
3051 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3053 * Makefile.in (ns32k-dis.o): Add dependency.
3054 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3055 string, not as array of chars.
3057 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3059 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3061 * sparc-opc.c: Added sparclite extended FP operations, and
3062 versions of v9 impdep* instructions permitting specification of
3065 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3067 * i960-dis.c (reg_names): Now const.
3068 (struct sparse_tabent): New type, copied from array type in mem
3070 (ctrl): Local static array ctrl_tab now const.
3071 (cobr): Local static array cobr_tab now const.
3072 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3073 static variable mem_tab no longer explicitly initialized. Changed
3074 mem_init to const array of struct sparse_tabent.
3075 (reg): Local static variable reg_tab no longer explicitly
3076 initialized. Changed reg_init to const array of struct
3078 (ea): Local static array scale_tab now const.
3080 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3083 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3085 * configure.bat: the disassember needs to be enabled for
3086 "objdump -d" to work in djgpp.
3088 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3090 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3091 (invalid_float): Enabled general version, doesn't require running
3092 on ns32k host. Changed to take char* argument, and test for
3093 explicitly specified sizes, instead of using sizeof() on host CPU
3095 (INVALID_FLOAT): Cast first argument.
3096 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3097 list_P032, list_M032): Now const.
3098 (optlist, list_search): Made appropriate arguments now point to
3100 (print_insn_arg): Changed static array of one-character-string
3101 pointers into a static const array of characters; fixed sprintf
3102 statement accordingly.
3104 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3106 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3107 from distribution. A ns32k-dis.c from a previous distribution has
3108 been brought up to date and supports the new interface.
3110 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3112 * configure.in: add bfd_ns32k_arch target support.
3114 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3115 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3117 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3119 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3122 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3124 * h8300-dis.c, mips-dis.c: Don't use true and false.
3126 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3128 * configure.in: Change --with-targets to --enable-targets.
3130 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3132 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3133 opcodes to the first instruction with that opcode, to speed
3134 disassembly of large files. From ralphc@pyramid.com (Ralph
3137 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3139 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3141 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3143 * configure.bat: update to latest makefile.in
3145 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3147 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3148 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3149 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3150 slot insn is in a delay slot.
3151 * z8k-opc.h: (resflg): Fix patterns.
3152 * h8500-opc.h Fix CR insn patterns.
3154 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3156 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3157 "cmpl" before POWER versions, so that gas -many uses them.
3159 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3161 * disassemble.c: New file.
3162 * Makefile.in (OFILES): Add disassemble.o.
3163 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3164 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3165 binutils/configure.in.
3167 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3168 opcode being examined.
3170 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3172 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3173 (insert_ral, insert_ram, insert_ras): New functions.
3174 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3175 RAS for store with update.
3177 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3179 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3180 (edelsohn@npac.syr.edu).
3182 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3184 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3187 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3189 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3191 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3193 * ppc-opc.c (powerpc_operands): The signedp field has been
3194 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3195 instead. Add new operand SISIGNOPT.
3196 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3197 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3198 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3201 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3203 * i386-dis.c (struct private): Renamed to dis_private. `private'
3204 is a reserved word for dynix cc.
3206 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3208 * configure.in: Change error message to refer to bfd/config.bfd
3209 rather than bfd/configure.in.
3211 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3213 * ppc-opc.c: Define POWER2 as short alias flag.
3214 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3217 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3219 * i960-dis.c (print_insn_i960): Don't read a second word for
3220 opcodes 0, 1, 2 and 3.
3222 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3224 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3226 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3228 * m68881-ext.c: Removed; no longer used.
3229 * Makefile.in: Changed accordingly.
3231 * m68k-dis.c (ext_format_68881): Don't declare.
3232 (print_insn_m68k): If an instruction uses place 'i', it uses at
3233 least four fixed bytes.
3234 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3235 extended float, convert to double using floatformat_to_double, not
3236 ieee_extended_to_double, and fetch the data before converting it.
3238 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3241 davidj@ICSI.Berkeley.EDU (David Johnson).
3243 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3245 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3246 PowerPC uses bdnz[l][a].
3248 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3250 * dis-buf.c, i386-dis.c: Include sysdep.h.
3252 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3254 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3256 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3257 by Motorola PowerPC 601 with PPC_OPCODE_601.
3258 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3259 Disassemble Motorola PowerPC 601 instructions as well as normal
3260 PowerPC instructions.
3262 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3264 * i960-dis.c (reg, mem): Just use a static array instead of
3267 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3269 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3270 condition name index if this is for a negated condition.
3272 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3273 Floating point format for 'H' operand is backwards from normal
3274 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3275 operands (fmpyadd and fmpysub), handle bizarre register
3276 translation correctly for single precision format.
3278 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3279 or 'I' operands if the next format specifier is 'M' (fcmp
3280 condition completer).
3282 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3284 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3285 single number giving a bitmask for the MB and ME fields of an M
3286 form instruction. Change NB to accept 32, and turn it into 0;
3287 also turn 0 into 32 when disassembling. Seperated SH from NB.
3288 (insert_mbe, extract_mbe): New functions.
3289 (insert_nb, extract_nb): New functions.
3290 (SC_MASK): Mask out SA and LK bits.
3291 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3292 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3293 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3294 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3295 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3296 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3297 (powerpc_macros): Define table of macro definitions.
3298 (powerpc_num_macros): Define.
3300 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3301 if PPC_OPERAND_NEXT is set.
3303 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3305 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3306 char. Retrieve contents using bfd_getl32 instead of shifting.
3308 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3310 * ppc-opc.c: New file. Opcode table for PowerPC, including
3311 opcodes for POWER (RS/6000).
3312 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3313 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3314 (CFILES): Add ppc-dis.c.
3315 (ppc-dis.o, ppc-opc.o): New targets.
3316 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3318 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3320 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3321 No space before 'u', 'f', or 'N'.
3323 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3325 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3326 farther than we should.
3328 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3330 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3332 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3334 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3336 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3337 needs it, to prevent reading past the end of a section.
3339 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3341 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3342 Removed t,A case for la; always use t,A(b) case.
3344 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3346 From Ted Lemen <mellon@pepper.ncd.com>
3347 * mips-dis.c (print_insn_arg): Handle 'k'.
3348 * mips-opc.c: Make cache use k, not t.
3350 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3352 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3353 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3354 FLOAT_FORMAT_CODE to put out floating point register names.
3356 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3358 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3360 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3362 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3364 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3366 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3367 larger than 32. Moved dsxx32 variants first for disassembler.
3369 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3371 * z8kgen.c, z8k-opc.h: Add full lda information.
3373 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3375 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3376 movb instructions. Any necessary space will be emitted by
3377 the code to handle nullification completers.
3379 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3381 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3383 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3385 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3386 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3388 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3390 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3392 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3394 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3395 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3397 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3399 * m88k-dis.c (m88kdis): comment change. Remove space after
3401 (printop): handle new arg types DEC and XREG for m88110.
3403 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3405 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3406 type for absolute branch addresses. Delete special
3407 "ble" and "be" code in 'W' operand code.
3409 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3411 * mips-opc.c: Set hazard information correctly for branch
3412 likely instructions.
3414 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3416 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3417 info->fprintf_func for printing and info->print_address_func for
3420 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3422 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3424 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3426 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3427 Corrected second case of "b" for disassembler.
3429 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3431 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3432 to BFD swapping routines to correspond to BFD name changes.
3434 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3436 * mips-opc.c: Change div machine instruction to be z,s,t rather
3437 than s,t. Change div macro to be d,v,t rather than d,s,t.
3438 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3439 rem and remu which generates only the corresponding div
3440 instruction. This is for compatibility with the MIPS assembler,
3441 which only generates the simple machine instruction when an
3442 explicit destination of $0 is used.
3443 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3445 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3447 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3448 WR_31 hazard for bal, bgezal, bltzal.
3450 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3452 * hppa-dis.c (print_insn_hppa): Use print function
3453 from within the disassemble_info, not fprintf_filtered.
3455 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3457 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3458 Law, law@cs.utah.edu.)
3460 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3462 * mips-opc.c ("absu"): Removed.
3465 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3467 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3468 Changed hazard information to distinguish between memory load
3469 delays and coprocessor load delays.
3471 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3473 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3475 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3477 * configure.in: Don't pass cpu to config.bfd.
3479 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3481 * m88k-dis.c (m88kdis): Make class unsigned.
3483 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3485 * alpha-dis.c (print_insn_alpha): One branch format case was
3486 missing the instruction name.
3488 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3490 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3491 Add the arch-specific auxiliary files.
3492 (OFILES): Remove the arch-specific auxiliary files
3493 and use BFD_MACHINES instead of DIS_LIBS.
3494 * configure.in: Set BFD_MACHINES based on --with-targets option.
3496 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3498 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3501 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3503 * sparc-opc.c: Change CONST to const to deal with gcc
3504 -Dconst=__const -traditional.
3506 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3508 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3509 coprocessor instructions out of #if 0, and made them use new
3512 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3514 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3516 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3518 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3519 instruction, for use by the disassembler.
3521 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3522 hand-coded sign extensions that depended on 32-bit host ints.
3523 FIXME, we still depend on big-endian host bitfield ordering.
3524 (sparc_print_insn): Set the insn_info_valid field, and the
3525 other fields that describe the instruction being printed.
3527 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3529 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3530 `jmp' instead of just one of them.
3532 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3534 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3535 (fput_fp_reg_r): Renamed from fput_reg_r.
3536 (fput_fp_reg): New function.
3537 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3539 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3541 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3543 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3545 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3547 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3548 don't output a space.
3550 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3552 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3554 * mips-opc.c: New file, containing opcode table from
3555 ../include/opcode/mips.h.
3556 * Makefile.in: Add it.
3558 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3560 * m88k-dis.c: New file, moved in from gdb and changed to use the
3561 new dis-asm.h disassembler interface.
3562 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3563 (m88k-dis.o): New target.
3565 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3567 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3568 argument string const char * to correspond to opcode/mips.h.
3570 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3572 * mips-dis.c: Updated to account for name changes in new version
3574 * Makefile.in: Added header file dependencies.
3576 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3578 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3580 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3582 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3583 extend, rather than shifts.
3585 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3587 * Makefile.in: Undo 15 June change.
3589 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3591 * m68k-dis.c (print_insn_arg): Change return value to byte count
3593 * m68k-dis.c: Re-write to detect invalid operands before
3594 printing anything, so we can handle this the same way we
3595 handle invalid opcodes.
3597 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3599 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3601 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3603 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3606 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3608 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3610 * configure.in: Do make sysdep.h link.
3611 * Makefile.in: Search ../include. Don't search ../bfd.
3613 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3615 Changes from Jeff Law, law@cs.utah.edu:
3616 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3617 Do not print a space before the completers specified by
3620 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3622 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3623 defined, since gdb has been fixed.
3625 Changes from Jeff Law, law@cs.utah.edu:
3626 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3627 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3628 be a *disassemble_info, not a *FILE.
3629 * hppa-dis.c: Support 'd', '!', and 'a'.
3630 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3631 * hppa-dis.c: Delete cases which are no longer needed.
3633 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3635 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3637 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3639 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3642 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3644 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3645 * configure.in: No longer need to configure to get sysdep.h.
3647 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3649 * Patches from Jeffrey Law <law@cs.utah.edu>.
3650 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3651 templates for 1.1 FP computational instructions.
3653 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3655 * h8500-dis.c (print_insn_h8500): Address argument is type
3657 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3660 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3661 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3663 * sparc-dis.c (compare_opcodes): Move static declaration to
3666 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3668 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3669 instruction, remove unimp hack from 'l' argument.
3671 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3673 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3676 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3678 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3679 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3682 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3684 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3685 arrays of string pointers to 2-d arrays of chars, to save
3688 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3690 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3691 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3693 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3695 * hppa-dis.c: New file from Utah, adapted to new disassembler
3697 * Makefile.in: Include it.
3699 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3701 * sh-dis.c, sh-opc.h: New files.
3703 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3705 * alpha-dis.c, alpha-opc.h: New files.
3707 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3709 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3712 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3714 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3716 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3718 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3721 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3723 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3724 and double percent signs a few places.
3726 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3728 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3729 Use info->print_address_func not print_address.
3731 * dis-buf.c (generic_print_address): New function.
3733 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3735 * Makefile.in: Add sparc-dis.c.
3736 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3738 Add `add' instruction to the set that get checked
3739 for a preceding `sethi' in order to print an absolute address.
3740 * (print_insn): Disassembly prefers real instructions.
3741 (is_delayed_branch): Speed up.
3742 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3743 Still missing some float ops, and needs testing.
3744 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3745 F_ALIAS. Use printf, not fprintf, when not passing a file
3747 (compare_opcodes): Check that identical instructions have
3748 identical opcodes, complain otherwise.
3751 * Include reg_names.
3753 Use dis-asm.h/read_memory_func interface.
3755 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3757 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3758 deliberately return non-zero to setjmp from longjmp. Otherwise
3759 this code fails to compile.
3761 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3763 * m68k-dis.c: Fix prototype for fetch_arg().
3765 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3767 * dis-buf.c: New file, for new read_memory_func interface.
3768 Makefile.in (OFILES): Include it.
3769 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3770 Use new read_memory_func interface.
3772 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3774 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3775 * h8500-opc.h: Fix couple of opcodes.
3777 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3779 * Makefile.in: add dvi & installcheck targets
3781 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3783 * Makefile.in: Update for h8500-dis.c.
3785 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3787 * h8500-dis.c, h8500-opc.h: New files
3789 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3791 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3792 ../include/dis-asm.h.
3793 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3794 and ../gdb/m68k-pinsn.c).
3795 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3796 and ../gdb/i386-pinsn.c).
3797 * m68881-ext.c: New file. Moved definition of
3798 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3799 * Makefile.in: Adjust for new files.
3800 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3801 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3802 can be dis-assembled.
3804 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3806 * mips-dis.c (print_insn_arg): Now returns void.
3808 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3810 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3811 files that use the macros.
3813 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3815 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3816 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3817 (CFILES): Added mips-dis.c.
3819 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3821 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3822 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3824 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3826 * Makefile.in: Improve *clean rules.
3827 * configure.in: Allow a default host.
3829 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3831 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3832 files include other sysdep files
3834 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3836 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3838 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3840 * configure.in: For host support, use ../bfd/configure.host
3841 so it stays in sync with the ../bfd/hosts database.
3843 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3845 * configure.in: use cpu-vendor-os triple instead of nested cases
3847 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3849 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3850 *always* the wrong one.
3852 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3854 * z8kgen.c: added copyright info
3856 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3858 * z8k-dis.c (unparse_instr): prettier tabs
3859 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3861 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3863 * configure.in: Add ncr* configuration.
3864 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3865 picayune ANSI compilers happy.
3867 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3869 * configure.in (i386): Make i386 and i486 synonymous for now.
3870 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3872 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3874 * Makefile.in (install): Fix typo.
3876 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3878 * Makefile.in (make): Remove obsolete crud.
3879 (sparc-opc.o): Avoid Sun Make VPATH bug.
3881 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3883 * Makefile.in: since there are no SUBDIRS, remove rule and
3884 references of subdir_do.
3886 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3888 * Makefile.in (install): Get the library name right here too.
3889 Don't install bfd.h, since it's unrelated to this library. No
3890 subdirs to recurse into, either.
3891 (CFILES): The source file has a .c suffix, not .o.
3893 * sparc-opc.c: New file, moved from BFD.
3894 * Makefile.in (OFILES): Build it.
3896 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3898 * z8k-dis.c: fixed forward refferences of some declarations.
3900 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3902 * Makefile.in: get the name of the library right
3904 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3906 * z8k-dis.c: knows how to disassemble z8k stuff
3907 * z8k-opc.h: new file full of z8000 opcodes
3911 version-control: never