1 1999-07-21 Ian Lance Taylor <ian@zembu.com>
4 * configure.bat: Remove; obsolete.
6 1999-07-11 Ian Lance Taylor <ian@zembu.com>
8 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
9 (generic_strcat_address): Add cast to avoid warning.
10 * i386-dis.c: Initialize all structure fields to avoid warnings.
11 Add ATTRIBUTE_UNUSED as appropriate.
13 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
15 * sparc-dis.c (print_insn_sparc): Differentiate between
16 addition and oring when guessing symbol for comment.
18 1999-07-05 Nick Clifton <nickc@cygnus.com>
20 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
23 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
25 * i386-dis.c: Mention intel mode specials in macro char comment.
27 1999-06-21 Ian Lance Taylor <ian@zembu.com>
29 * alpha-dis.c: Don't include <stdlib.h>.
30 * arm-dis.c: Include "sysdep.h".
31 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
33 * Makefile.am: Rebuild dependencies.
34 * Makefile.in: Rebuild.
36 1999-06-16 Nick Clifton <nickc@cygnus.com>
38 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
41 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
43 * arm-dis.c (arm_regnames): Turn into a pointer to a register
45 (arm_regnames_standard): New variable: Array of ARM register
46 names according to ARM instruction set nomenclature.
47 (arm_regnames_apcs): New variable: Array of ARM register names
48 according to ARM Procedure Call Standard.
49 (arm_regnames_raw): New variable: Array of ARM register names
50 using just 'r' and the register number.
51 (arm_toggle_regnames): New function: Toggle the chosen register set
53 (parse_disassembler_options): New function: Parse any target
54 disassembler command line options.
55 (print_insn_big_arm): Call parse_disassembler_options if any
57 (print_insn_little_arm): Call parse_disassembler_options if any
60 1999-06-13 Ian Lance Taylor <ian@zembu.com>
62 * i386-dis.c (FWAIT_OPCODE): Define.
63 (used_prefixes): New static variable.
64 (fetch_data): Don't print an error message if we have already
65 fetched some bytes successfully.
66 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
67 (prefix_name): New static function.
68 (print_insn_i386): If setjmp fails, indicating a data error, but
69 we have managed to fetch some bytes, print the first one as a
70 prefix or a .byte pseudo-op. If fwait is followed by a non
71 floating point instruction, print the first prefix. Set
72 used_prefixes when prefixes are used. If any prefixes were not
73 used after disassembling the instruction, print the first prefix
74 instead of printing the instruction.
75 (putop): Set used_prefixes when prefixes are used.
76 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
77 (OP_DIR, OP_SIMD_Suffix): Likewise.
79 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
81 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
82 Support signx %reg, clruw %reg.
84 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
86 * sparc-opc.c: Add aliases Solaris as supports.
88 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
90 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
91 * Makefile.in: Regenerated.
93 1999-06-03 Philip Blundell <philb@gnu.org>
95 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
96 when target is PC-relative.
98 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
100 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
103 * m68k-dis.c (fetch_arg): Add places `n', `o'.
105 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
106 Add mcf5206e to appropriate instructions.
107 Add alias for MAC, MSAC.
109 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
112 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
113 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
115 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
117 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
119 * i386-dis.c (Ed): Define.
120 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
122 (OP_rm): Rename to OP_Rd.
125 (putop): Add const to template and p.
126 (print_insn_x86): Delete.
127 (print_insn_i386): Merge old function print_insn_x86. Add const
129 (struct dis386): Add const to name.
130 (dis386_att, dis386_intel): Add const.
131 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
132 (names32, names16, names8, names_seg, index16): Add const.
133 (grps, prefix_user_table, float_reg): Add const.
134 (float_mem_att, float_mem_intel): Add const.
135 (oappend): Add const to s.
136 (OP_REG): Add const to s.
137 (ptr_reg): Add const to s.
138 (dofloat): Add const to dp.
139 (OP_C): Don't skip modrm, it's now done in OP_Rd.
142 (OP_Rd): Check for valid mod. Call Op_E to print.
143 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
144 (OP_MS): Check for valid mod. Call Op_EM to print.
145 (OP_3DNowSuffix): Set obufp and use oappend rather than
146 strcat. Call BadOp() for errors.
147 (OP_SIMD_Suffix): Likewise.
148 (BadOp): New function.
150 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
152 * i386-dis.c (dis386_intel): Remove macro chars, except for
153 jEcxz. Change cWtR and cRtd to cW and cR.
154 (dis386_twobyte_intel): Remove macro chars here too.
155 (putop): Handle R and W macros for intel mode.
157 * i386-dis.c (SIMD_Fixup): New function.
158 (dis386_twobyte_att): Use it on movlps and movhps, and change
159 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
160 (dis386_twobyte_intel): Same here.
162 * i386-dis.c (Av): Remove.
166 (OP_SIMD_Suffix): New function.
167 (OP_DIR): Remove dead code.
168 (eAX_reg..eDI_reg): Renumber.
169 (onebyte_has_modrm): Table numbering comments.
170 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
171 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
172 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
173 and handle SIMD cmp insns in OP_SIMD_Suffix.
174 (info->bytes_per_line): Bump from 5 to 6.
176 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
177 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
179 PIII SIMD support from Doug Ledford <dledford@redhat.com>
180 * i386-dis.c (XM, EX, None): Define.
181 (OP_XMM, OP_EX, OP_None): New functions.
182 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
183 (GRP14): Rename to GRPAMD.
184 (GRP*): Add USE_GROUPS flag.
186 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
187 (twobyte_has_modrm): Add SIMD entries.
188 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
189 (grps): Add SIMD insns.
190 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
191 oappend repz if uses_f3_prefix. Add code to handle new groups for
194 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
195 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
196 operand from Av to Jv.
198 1999-05-07 Nick Clifton <nickc@cygnus.com>
200 * mcore-dis.c (print_insn_mcore): Use .short to display
201 unidentified instructions, not .word.
203 1999-04-26 Tom Tromey <tromey@cygnus.com>
205 * aclocal.m4, configure: Updated for new version of libtool.
207 1999-04-14 Doug Evans <devans@casey.cygnus.com>
209 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
210 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
212 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
214 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
217 1999-04-10 Doug Evans <devans@casey.cygnus.com>
219 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
220 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
222 1999-04-06 Ian Lance Taylor <ian@zembu.com>
224 * opintl.h (LC_MESSAGES): Never define.
226 1999-04-04 Ian Lance Taylor <ian@zembu.com>
228 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
229 (separator_char, scale_char): Likewise.
230 (print_insn_x86): Likewise.
231 (print_insn_i386): Likewise. Add declaration.
233 1999-03-26 Doug Evans <devans@casey.cygnus.com>
235 * fr30-dis.c: Rebuild.
236 * m32r-dis.c: Rebuild.
238 1999-03-23 Ian Lance Taylor <ian@zembu.com>
240 * m68k-opc.c: Change compare instructions to use "@s" rather than
241 ";s" when used with an immediate operand.
243 1999-03-22 Doug Evans <devans@casey.cygnus.com>
245 * cgen-opc.c (cgen_set_cpu): Delete.
246 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
247 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
249 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
251 * po/opcodes.pot: Rebuild.
253 1999-03-16 Martin Hunt <hunt@cygnus.com>
255 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
257 1999-03-11 Doug Evans <devans@casey.cygnus.com>
259 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
260 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
261 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
262 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
263 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
264 * m32r-opinst.c: Rebuild.
266 1999-02-25 Doug Evans <devans@casey.cygnus.com>
268 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
269 (cgen_hw_lookup_by_num): Rewrite.
270 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
271 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
272 * m32r-opinst.c: Rebuild.
274 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
276 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
277 (insert_jhint): Fix insertion mask.
278 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
280 1999-02-10 Doug Evans <devans@casey.cygnus.com>
282 * Makefile.in: Rebuild.
284 1999-02-09 Doug Evans <devans@casey.cygnus.com>
286 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
287 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
288 * Makefile.am: Remove references to them.
289 (HFILES): Add fr30-desc.h,m32r-desc.h.
290 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
292 (ALL_MACHINES): Update.
293 * configure.in: Redo handling of cgen_files.
294 (bfd_i960_arch): Delete i960c-*.lo files.
295 * configure: Regenerate.
296 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
297 (hash_insn_array): Rewrite.
298 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
299 (hash_insn_array): Rewrite.
300 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
301 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
302 (cgen_lookup_get_insn_operands): Ditto.
303 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
304 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
305 * po/POTFILES.in: Rebuild.
306 * po/opcodes.pot: Rebuild.
308 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
310 * Makefile.am: Rebuild dependencies.
311 (HFILES): Add fr30-opc.h.
312 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
313 * Makefile.in: Rebuild.
315 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
316 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
318 * acconfig.h: Remove.
319 * configure: Rebuild with current autoconf/automake.
320 * aclocal.m4: Likewise.
321 * config.in: Likewise.
322 * Makefile.in: Likewise.
324 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
326 * m68k-opc.c: Correct move (not movew) to status word on 5200.
328 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
330 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
331 * i386-dis.c (x_mode): Define.
335 (dis386_twobyte): Remove.
336 (dis386_twobyte_att): New.
337 (dis386_twobyte_intel): New.
338 (print_insn_x86): Use new arrays.
340 (float_mem_intel): New.
341 (float_mem_att): New.
342 (dofloat): Use new float_mem arrays.
343 (print_insn_i386_att): New.
344 (print_insn_i386_intel): New.
345 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
346 (putop): Handle intel syntax.
347 (OP_indirE): Handle intel syntax.
348 (OP_E): Handle intel syntax.
349 (OP_I): Handle intel syntax.
350 (OP_sI): Handle intel syntax.
351 (OP_OFF): Handle intel syntax.
355 1999-01-27 Doug Evans <devans@casey.cygnus.com>
357 * fr30-opc.h,fr30-opc.c: Rebuild.
358 * i960c-opc.h,i960c-opc.c: Rebuild.
359 * m32r-opc.c: Rebuild.
361 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
363 * hppa-dis.c: revert HP merge changes until HP gives us
366 1999-01-19 Nick Clifton <nickc@cygnus.com>
368 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
369 offsets as well as symbloic address.
371 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
373 * hppa-dis.c: fix comments and some indentation.
375 1999-01-12 Doug Evans <devans@casey.cygnus.com>
377 * fr30-opc.c,i960c-opc.c: Regenerate.
379 1999-01-11 Doug Evans <devans@casey.cygnus.com>
381 * fr30-opc.c: Regenerate.
383 1999-01-06 Doug Evans <devans@casey.cygnus.com>
385 * m32r-dis.c: Regenerate.
387 1999-01-05 Doug Evans <devans@casey.cygnus.com>
389 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
390 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
391 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
393 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
395 * configure.in: Require autoconf 2.12.1 or higher.
397 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
399 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
401 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
403 * fr30-opc.c: Regenerated.
405 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
407 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
409 1998-12-15 Dave Brolley <brolley@cygnus.com>
411 * fr30-opc.c,fr30-opc.h: Regenerated.
413 1998-12-14 Dave Brolley <brolley@cygnus.com>
415 * fr30-opc.c,fr30-opc.h: Regenerated.
417 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
419 * fr30-opc.c,fr30-opc.h: Regenerated.
421 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
423 * m32r-opc.c: Regenerate.
425 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
427 * dis-buf.c (generic_strcat_address): reformat to GNU coding
428 conventions. change sprintf call to an sprintf_vma call.
430 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
432 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
434 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
436 The following changes were made by
437 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
438 David Taylor <taylor@texas.cygnus.com>, and
439 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
440 merge in changes by HP; HP did not create ChangeLog entries.
442 * dis-buf.c (generic_strcat_address): new function.
444 * hppa-dis.c: Changes to improve hppa disassembly.
445 Changed formatting in : reg_names, fp_reg_names,control_reg,
446 New variables : sign_extension_names, deposit_names, conversion_names
447 float_test_names, compare_cond_names_double, add_cond_names_double,
448 logical_cond_names_double, unit_cond_names_double,
449 branch_push_pop_names, saturation_names, shift_names, mix_names,
450 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
451 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
452 (fput_const): renamed as fput_hex_const
454 - use the macros fputs_filtered and
455 fput_decimal_const whenever possible; calls to sign_extend require
456 2 params -- add a missing second param of 0.
457 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
458 architecture version number of current machine. HP folks are
459 trying to handle situation where the target program was compiled
460 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
462 - added new cases : 'g', 'B', 'm'
463 - added cases specifically for PA 2.0
464 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
465 - calls to fput_const become calls to fput_hex_const
467 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
469 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
470 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
471 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
472 * Makefile.in: Rebuilt.
473 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
475 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
476 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
478 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
480 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
482 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
484 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
486 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
487 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
489 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
491 * fr30-opc.c: Regenerate.
493 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
495 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
497 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
499 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
501 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
503 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
505 1998-11-30 Doug Evans <devans@casey.cygnus.com>
507 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
508 CGEN_INSN_BASE_VALUE.
509 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
510 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
512 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
514 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
516 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
518 * fr30-asm.c,fr30-dis.c: Regenerated.
520 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
522 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
524 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
526 * fr30-opc.c: Regenerated.
528 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
530 * fr30-opc.c: Regenerated.
531 * fr30-opc.h: Regenerated.
532 * fr30-dis.c: Regenerated.
533 * fr30-asm.c: Regenerated.
535 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
537 * mips-opc.c (sync.p,sync.l): Swap insn values.
539 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
541 * fr30-opc.c: Regenerate.
543 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
545 * fr30-opc.c: Regenerated.
546 * fr30-opc.h: Regenerated.
548 1998-11-18 Doug Evans <devans@casey.cygnus.com>
550 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
551 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
553 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
555 * fr30-opc.c: Regenerated.
557 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
559 * fr30-opc.c: Regenerated.
560 * fr30-opc.h: Regenerated.
561 * fr30-dis.c: Regenerated.
562 * fr30-asm.c: Regenerated.
564 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
566 * po/opcodes.pot: Regenerated.
567 * fr30-opc.c: Regenerated.
568 * fr30-opc.h: Regenerated.
569 * fr30-dis.c: Regenerated.
570 * fr30-asm.c: Regenerated.
572 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
574 * disassemble.c (disassembler): Add support for FR30 target.
576 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
578 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
579 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
581 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
583 * po/opcodes.pot: Regenerate.
584 * po/POTFILES.in: Regenerate.
585 * fr30-opc.c: Regenerate.
586 * fr30-opc.h: Regenerate.
588 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
590 * m32r-asm.c: Regenerate.
592 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
594 * configure.in: Added case for bfd_fr30_arch.
595 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
596 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
597 (CLEANFILES): Added stamp-fr30.
599 * fr30-asm.c: New file.
600 * fr30-dis.c: New file.
601 * fr30-opc.c: New file.
602 * fr30-opc.h: New file.
603 * po/POTFILES.in: Regenerated
604 * po/opcodes.pot: Regenerated
606 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
608 * configure.in: detect cygwin* instead of cygwin32*
609 * configure: regenerate
611 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
613 * mips-opc.c (IS_M): Added.
615 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
617 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
619 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
621 * m32r-opc.h,m32r-opc.c: Regenerate.
623 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
625 * i386-dis.c (OP_3DNowSuffix): New static function.
628 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
629 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
630 (insn_codep): New static variable.
631 (print_insn_x86): Init insn_codep after prefixes.
632 (grps): Add GRP14 entries for prefetch, prefetchw.
635 From Jeff B Epler <jepler@usgs.gov>
636 * i386-dis.c (Suffix3DNow): New table.
638 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
640 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
642 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
644 * d10v-dis.c (print_operand): If num is nonzero, then
645 add OPERAND_ACC1, not OPERAND_ACC0.
647 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
649 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
652 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
654 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
657 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
659 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
661 1998-09-09 Michael Meissner <meissner@cygnus.com>
663 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
666 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
668 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
670 (print_insn_little_arm): Detect Thumb symbols in elf object
673 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
675 * alpha-dis.c (print_insn_alpha): Use the machine type to
676 decide which PALcode set to include.
678 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
680 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
682 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
684 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
685 MSUB and MSUBS instructions.
687 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
689 * ppc-opc.c (powerpc_operands): Omit parens around additions in
692 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
694 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
695 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
696 +, -, and d for ColdFire.
698 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
699 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
700 (extract_mbe): Likewise.
702 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
704 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
706 * m10300-opc.c: First cut at UDF instructions.
708 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
710 * m32r-opc.c: Regenerate (remove semantic descriptions).
712 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
714 * arm-dis.c (print_insn_big_arm): Fix indentation.
715 (print_insn_little_arm): Likewise.
717 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
719 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
721 (print_insn_little_arm): Likewise.
723 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
725 Move all global state data into opcode table struct, and treat
726 opcode table as something that is "opened/closed".
727 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
728 (cgen_asm_init): Delete.
729 (cgen_set_parse_operand_fn): New function.
730 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
731 (cgen_dis_init): Delete.
732 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
733 (cgen_current_{opcode_table_mach,endian}): Delete.
734 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
736 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
738 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
741 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
743 * m10300-opc.c: Add entries for "no_match_operands" field in
746 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
748 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
750 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
752 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
754 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
756 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
758 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
760 (OP_J): Remove unnecessary subtraction when 16-bit displacement
761 will be masked later.
763 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
765 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
767 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
769 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
771 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
773 * m10300-dis.c: Only recognize instructions from the currently
775 * m10300-opc.c: Add field indicating the particular variant of
776 the mn10300 each instruction is available on.
778 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
780 * configure.in: For bfd_vax_arch, build vax-dis.lo.
781 * Makefile.am: Rebuild dependencies.
782 (CFILES): Add vax-dis.c.
783 (ALL_MACHINES): Add vax-dis.lo.
784 * aclocal.m4: Rebuild with current libtool.
785 * configure, Makefile.in: Rebuild.
787 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
789 * vax-dis.c: New file, from work by Pauline Middelink
790 <middelin@polyware.iaf.nl>.
791 * disassemble.c (ARCH_vax): Define if ARCH_all.
792 (disassembler): Add case for ARCH_vax.
793 * makefile.vms: Support compilation on vms/vax.
795 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
797 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
798 related to sign extension and the size of ints.
800 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
802 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
803 instructions. Support (sp) addressing mode by expanding it into
806 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
808 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
810 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
812 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
814 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
816 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
819 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
821 * mips-dis.c (print_insn_little_mips): Previously, instruction
822 printing references the symbol table to determine whether the
823 instruction resides in a block regular instructions or mips16
824 instructions. However, when the disassembler gets used in other
825 environments where the symbol table is not present, we no longer
826 rely in the symbol table, rather, use the low bit of the
827 instructions address to guess. There should be no change for usage
828 of the disassembler in host based programs, gdb, objdump.
829 (print_insn_big_mips): ditto.
830 (print_insn_mips): ditto
832 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
834 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
836 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
838 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
840 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
842 * i386-dis.c (index16): Add '%' to register names. Use ','
845 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
847 * i386-dis.c: Don't print opcode suffix when we can figure out the
848 size (and gas can!) by register operands, or from the default
850 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
852 (dis386, dis386_twobyte, grps): Use new suffix macros.
853 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
854 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
855 order of cmps operands to agree with Intel docs. Correct operand
856 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
857 agree with Intel docs.
858 (print_insn_x86): Print orphan fwait before other prefixes.
859 Return correct byte count for orphan fwait with prefixes. Don't
860 print `bound' operands in reverse order.
861 (ckprefix): Stop accumulating prefixes if we get fwait.
862 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
864 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
866 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
867 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
869 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
871 Fix problems when bfd_vma is wider than long.
872 * i386-dis.c: Make op_address and start_pc unsigned.
873 (set_op): Make parameter unsigned.
874 (print_insn_x86): Cast to bfd_vma when passing a value to
876 * ns32k-dis.c (CORE_ADDR): Don't define.
877 (print_insn_ns32k): Change type of addr to bfd_vma. Use
878 bfd_scan_vma to read back address.
879 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
881 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
882 (NEXTULONG): New definition.
883 (print_insn_m68k): Avoid overflow when computing third argument of
885 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
886 Use disp instead of val to store offset values.
887 (print_indexed): Use base_disp instead of word to store base
888 displacement, to avoid overflow.
889 * m10300-dis.c (disassemble): Cast value to long when computing
890 pc-relative address, to get correct sign extension.
892 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
894 * m32r-opc.c: Regenerate.
896 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
898 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
899 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
901 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
903 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
905 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
907 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
909 (OP_DSreg): Rename from OP_DSSI.
910 (OP_ESreg): Rename from OP_ESDI.
911 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
913 (append_seg): Rename from append_prefix.
914 (ptr_reg): New function.
915 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
917 (PREFIX_ADDR): Rename from PREFIX_ADR.
918 (float_reg): Add non-broken opcodes for people who don't want
921 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
923 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
926 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
928 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
930 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
932 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
933 0; produce error message for shifts of size 32 (or 64 for 64-bit
934 shifts), because the hardware doesn't support them.
936 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
938 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
939 LONG_2, LONG_2b formats to use this new operand.
941 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
943 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
945 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
947 * sparc-dis.c (print_insn_sparc): big endian instruction / little
950 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
952 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
953 and SHORT_B3b formats to use Rb instead of Ra.
955 Add FLAG_MUL16 to MUL2XH opcode.
957 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
958 to existing 1.1.1 parallelisation prohibition procedure.
960 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
962 * m32r-asm.c,m32r-dis.c: Regenerate.
964 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
966 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
967 with a shift count of 0.
969 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
971 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
972 (cgen_hw_lookup_by_num): New function.
974 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
976 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
978 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
980 * sparc-dis.c (print_insn_sparc): Always fetch instructions
981 as big-endian on SPARClite.
983 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
985 * d30v-opc.c (pre_defined_register): Remove alias for r0.
987 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
989 * po/Make-in (install-info): New target.
991 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
993 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
994 * configure: Rebuild.
996 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
998 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
999 variety of ISA2 instructions to set bottom ten bits of trap code.
1001 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1003 * Makefile.am (config.status): Add explicit target so that
1004 config.status depends upon bfd/configure.in.
1005 * Makefile.in: Rebuild.
1007 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1009 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1010 instructions to set bottom ten bits of break code.
1011 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1012 for above optional argument.
1014 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1016 * makefile.vms: Run dec c with /nodebug.
1018 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1020 * Makefile.in: Rebuilt.
1021 * Makefile.am: Regenerated dependencies with mkdep.
1023 * opintl.h (_): Define as dgettext.
1025 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1027 * cgen-asm.c: Internationalised.
1028 * m32r-asm.c: Internationalised.
1029 * m32r-dis.c: Internationalised.
1030 * m32r-opc.c: Internationalised.
1032 * aclocal.m4: Regenerated.
1033 * configure: Regenerated.
1034 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1035 * Makefile.in: Rebuild.
1036 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1037 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1039 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1041 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1043 * aclocal.m4, configure: Rebuild with current tools.
1045 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1047 * opintl.h: New file - contains internationalisation macros used
1048 by source files in this directory.
1049 * po/: New subdirectory - contains internationalisation files.
1050 * po/Make-in: New file - Makefile constructor.
1051 * po/POTFILES.in: New file - list of files in opcodes directory
1052 that should be scan for internationalisation macros.
1053 * po/opcodes.pot: New file - list of internationisation strings
1054 found in files mentioned in po/POTFILES.in.
1055 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1056 entry. Add intl directory to include paths.
1057 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1058 HAVE_STRCPY, HAVE_LC_MESSAGES
1059 * configure.in: Add rule to build Makefile in po subdirectory.
1060 * Makefile.in: Rebuilt.
1061 * aclocal.m4: Rebuilt.
1062 * config.in: Rebuilt.
1063 * configure: Rebuilt.
1064 * alpha-opc.c: Internationalised.
1065 * arc-dis.c: Internationalised.
1066 * arc-opc.c: Internationalised.
1067 * arm-dis.c: Internationalised.
1068 * cgen-asm.c: Internationalised.
1069 * d30v-dis.c: Internationalised.
1070 * dis-buf.c: Internationalised.
1071 * h8300-dis.c: Internationalised.
1072 * h8500-dis.c: Internationalised.
1073 * i386-dis.c: Internationalised.
1074 * m10200-dis.c: Internationalised.
1075 * m10300-dis.c: Internationalised.
1076 * m68k-dis.c: Internationalised.
1077 * m88k-dis.c: Internationalised.
1078 * mips-dis.c: Internationalised.
1079 * ns32k-dis.c: Internationalised.
1080 * opintl.h: Internationalised.
1081 * ppc-opc.c: Internationalised.
1082 * sparc-dis.c: Internationalised.
1083 * v850-dis.c: Internationalised.
1084 * v850-opc.c: Internationalised.
1086 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1088 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1089 (asm_hash_table_entries): New variable.
1090 (cgen_asm_init): Free asm_hash_table_entries.
1091 (hash_insn_array,hash_insn_list): New functions.
1092 (build_asm_hash_table): Use them. Hash macro insns as well.
1093 (cgen_asm_lookup_insn): Update.
1094 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1095 (dis_hash_table_entries): New variable.
1096 (cgen_dis_init): Free dis_hash_table_entries.
1097 (hash_insn_array,hash_insn_list): New functions.
1098 (build_dis_hash_table): Use them. Hash macro insns as well.
1099 (cgen_dis_lookup_insn): Update.
1100 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1101 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1102 (cgen_macro_insn_count): New function.
1103 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1105 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1107 * i386-dis.c (OP_DSSI): Print segment override.
1109 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1111 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1114 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1116 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1117 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1118 * configure.in: Define and substitute WIN32LDFLAGS and
1120 * aclocal.m4: Rebuild with new libtool.
1121 * configure, Makefile.in: Rebuild.
1123 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1125 * m32r-opc.c: Regenerate.
1127 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1129 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1130 before trying to copy it.
1131 * Makefile.in: Rebuild.
1133 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1135 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1137 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1139 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1140 from an arbitrary valid buffer instead of fetching them on demand
1142 (invalid_float): use bit_extract_simple() instead of bit_extract().
1144 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1146 From H.J. Lu <hjl@gnu.org>:
1147 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1150 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1152 * Branched binutils 2.9.
1154 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1156 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1157 disassembling last 4 bytes of a section.
1159 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1161 Fix some gcc -Wall warnings:
1162 * arc-dis.c (print_insn): Add casts to avoid warnings.
1163 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1164 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1165 * m10200-dis.c (disassemble): Likewise.
1166 * m10300-dis.c (disassemble): Likewise.
1167 * ns32k-dis.c (print_insn_ns32k): Likewise.
1168 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1169 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1170 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1171 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1172 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1173 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1174 * tic80-dis.c (print_one_instruction): Likewise.
1175 * w65-dis.c (print_operand): Likewise.
1176 * z8k-dis.c (fetch_data): Likewise.
1177 * a29k-dis.c: Add return type for find_byte_func_type.
1178 * arc-opc.c: Include <stdio.h>. Remove declarations of
1179 insert_multshift and extract_multshift.
1180 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1182 (extract_value): Fully parenthesize expression.
1183 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1184 * h8500-opc.h (h8500_table): Fully bracket initializer.
1185 * w65-opc.h (optable): Likewise.
1186 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1187 * i386-dis.c (OP_E): Initialize local variables.
1188 * m10200-dis.c (print_insn_mn10200): Likewise.
1189 * mips-dis.c (print_insn_mips16): Likewise.
1190 * sh-dis.c (print_insn_shx): Likewise.
1191 * v850-dis.c (print_insn_v850): Likewise.
1192 * ns32k-dis.c (print_insn_arg): Declare.
1193 (get_displacement, invalid_float): Declare.
1194 (list_search, sign_extend, flip_bytes): Declare return type.
1195 (get_displacement): Likewise.
1196 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1198 (print_insn_ns32k): Make i unsigned.
1199 (invalid_float): Make static. Declare type of val.
1200 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1201 on each for iteration.
1202 * tic30-dis.c (get_indirect_operand): Likewise.
1203 * z8k-dis.c (print_insn_z8001): Declare return type.
1204 (print_insn_z8002): Likewise.
1205 (unparse_instr): Fix sprintf format strings.
1207 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1209 * mips-opc.c: Add "sync.l" and "sync.p".
1211 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1213 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1214 default m68k variant to recognize.
1216 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1217 (ctrl, cobr, mem, ea): Likewise.
1218 (print_addr): Likewise. Remove cast.
1219 (ea): Cast argument of print_addr to bfd_vma.
1221 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1223 (cgen_parse_unsigned_integer): Likewise.
1224 (cgen_parse_address): Likewise.
1226 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1228 * i960-dis.c (ctrl): Add full braces to structure initialization.
1229 (cobr, mem, reg): Likewise.
1230 (ea): Correct parenthesization in expression.
1232 * cgen-asm.c: Include <ctype.h>.
1233 (build_asm_hash_table): Remove unused local variable i.
1234 (cgen_parse_keyword): Add casts to avoid warnings.
1236 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1237 symbol. Fix indentation.
1238 (print_insn_little_arm): Likewise.
1240 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1242 * configure.in: Use AM_DISABLE_SHARED.
1243 * aclocal.m4, configure: Rebuild with libtool 1.2.
1245 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1247 These patches are courtesy of Jonathan Walton and Tony Thompson
1248 (athompso@cambridge.arm.com).
1250 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1253 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1254 both the offset and the label closest to the destination.
1256 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1258 * m32r-opc.h: Regenerate.
1260 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1262 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1264 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1266 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1267 assume that info->symbols is non-empty.
1269 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1271 * alpha-opc.c (cvtqs) There is no such thing.
1272 (cvttq): Missing most of the /*d variants.
1274 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1276 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1277 delayed branches or jumps.
1279 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1281 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1283 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1284 * tic30-dis.c (print_branch): Likewise.
1286 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1288 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1289 saved_symbol code as it is no longer needed.
1291 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1293 * cgen-asm.c: Include symcat.h.
1294 * cgen-dis.c,cgen-opc.c: Ditto.
1295 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1297 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1299 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1301 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1303 * m32r-opc.[ch]: Regenerate.
1305 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1307 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1308 arguments. Don't perform validation here.
1309 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1311 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1313 * m32r-opc.c: Regenerate.
1315 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1317 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1318 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1320 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1322 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1324 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1326 * configure.in: Get the version number from BFD.
1327 * configure: Rebuild.
1329 From H.J. Lu <hjl@gnu.org>:
1330 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1331 * Makefile.in: Rebuild.
1333 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1335 * m32r-opc.c: Regenerate.
1336 * m32r-opc.h: Regenerate.
1338 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1340 * m32r-opc.c: Regenerate.
1342 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1344 Fix rac to accept only a0:
1345 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1346 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1347 Introduce OPERAND_GPR.
1348 * d10v-dis.c (print_operand): Likewise.
1350 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1352 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1353 (cgen_hw_lookup): Make result const.
1354 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1356 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1358 * configure, aclocal.m4: Rebuild with new libtool.
1360 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1362 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1363 instructions use a PC relative branch, not absolute.
1365 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1367 * configure.in: Set libtool_enable_shared rather than
1368 libtool_shared. Remove diversion hack.
1369 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1371 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1373 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1374 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1376 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1378 * tic30-dis.c: New file.
1379 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1380 * configure.in: Handle bfd_tic30_arch.
1381 * Makefile.am: Rebuild dependencies.
1382 (CFILES): Add tic30-dis.c
1383 (ALL_MACHINES): Add tic30-dis.lo.
1384 * configure, Makefile.in: Rebuild.
1386 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1388 * m32r-opc.h (HAVE_CPU_M32R): Define.
1390 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1392 * v850-opc.c (insertion routines): If both alignment and size is
1393 wrong then report this.
1395 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1397 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1398 Only recognize instructions for the current target_processor.
1400 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1402 * d10v-dis.c (PC_MASK): Correct value.
1403 (print_operand): If there's a reloc, don't calculate the
1404 address because they could be in different sections.
1406 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1408 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1409 instruction after the 4650's "mul" instruction; nobody's using the
1410 4010 these days. If object files someday indicate which processor
1411 variant they're intended for, we can do a better job at this.
1413 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1415 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1416 table provided entry size. Use CGEN_INSN_MNEMONIC.
1417 (cgen_parse_keyword): Rewrite.
1418 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1419 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1420 * cgen-opc.c: Clean up pass over `struct foo' usage.
1421 (cgen_keyword_lookup_value): Handle "" entry.
1422 (cgen_keyword_add): Likewise.
1424 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1426 * mips-opc.c: Add FP_D to s.d instruction flags.
1428 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1430 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1432 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1434 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1435 PC relative offset forms before the 15 bit forms. An assembler command
1436 line option now chooses the default.
1438 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1440 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1441 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1443 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1445 * configure: Only build libopcodes shared if --enable-shared's value
1446 was `yes', or was set to `*opcodes*'.
1447 * aclocal.m4: Likewise.
1448 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1449 original source of this bit of code. It's not clear what the best fix
1452 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1454 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1455 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1456 offset forms before the 15 bit forms, to default to the long forms.
1458 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1460 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1462 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1464 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1465 symbol if none is present.
1466 (print_insn_big_arm): Prevent examination of stored symbol if
1469 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1471 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1473 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1475 * disassemble.c: Remove disasm_symaddr() function.
1477 * arm-dis.c: Use info->symbol instead of info->flags to determine
1478 if disassmbly should be in Thumb or Arm mode.
1480 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1482 * arm-dis.c: Add support for disassembling Thumb opcodes.
1483 (print_insn_thumb): New function.
1485 * disassemble.c (disasm_symaddr): New function.
1487 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1488 (thumb_opcodes): Table of Thumb opcodes.
1490 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1492 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1494 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1495 and 'v' as operand types.
1497 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1499 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1500 <olivier.carmona@di.epfl.ch>.
1501 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1502 which has a two word opcode with a one word argument.
1504 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1506 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1507 unsigned, not signed.
1508 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1510 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1512 * d10v-dis.c (print_operand):
1513 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1515 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1517 * d10v-opc.c (OPERAND_FLAG): Split into:
1518 (OPERAND_FFLAG, OPERAND_CFLAG) .
1522 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1524 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1525 field for all INSN_MACRO's.
1526 * mips16-opc.c: same
1528 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1530 * mips-opc.c (sync,cache): These are 3900 insns.
1532 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1534 sh-opc.h (sh_table): Remove ftst/nan.
1536 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1538 * mips-opc.c (ffc, ffs): Fix mask.
1540 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1542 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1545 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1547 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1548 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1550 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1552 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1553 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1555 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1557 * v850-dis.c (disassemble): Replace // with /* ... */
1559 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1561 * sparc-opc.c: Add wr & rd for v9a asr's.
1562 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1563 (v9a_asr_reg_names): New variable.
1564 Patch from David Miller <davem@vger.rutgers.edu>.
1566 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1568 * sparc-opc.c (v9notv9a): New insn type.
1569 (IMPDEP): Move to the end to not conflict with edge8 et al.
1570 Patch from David Miller <davem@vger.rutgers.edu>.
1572 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1574 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1576 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1578 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1580 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1582 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1583 of disassemble_info structure to determine if an overlay address
1584 has a matching symbol in low memory.
1586 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1587 new symbol_at_address_func field in disassemble_info structure.
1589 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1591 * v850-opc.c (extract_d22): Use signed arithmatic.
1593 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1595 * mips-opc.c: Three op mult is not an ISA insn.
1597 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1599 * mips-opc.c: Fix formatting.
1601 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1603 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1604 than assuming that char is signed. Explicitly sign extend 16 bit
1605 values, rather than assuming that short is 16 bits.
1606 (OP_sI, OP_J, OP_DIR): Likewise.
1608 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1610 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1613 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1615 * v850-opc.c: Fix typo in comment.
1617 * v850-dis.c (disassemble): Add test of processor type when
1618 determining opcodes.
1620 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1622 * configure.in: Use a diversion to set enable_shared before the
1623 arguments are parsed.
1624 * configure: Rebuild.
1626 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1628 * m68k-opc.c (TBL1): Use ! rather than `.
1629 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1631 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1633 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1635 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1637 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1640 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1641 * aclocal.m4: Rebuild with new libtool.
1642 * configure: Rebuild.
1644 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1646 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1648 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1650 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1652 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1654 * v850-opc.c (v850_opcodes): Further rearrangements.
1656 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1658 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1660 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1662 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1665 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1667 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1669 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1671 * v850-opc.c: Initialise processors field of v850_opcode structure.
1673 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1675 Merge changes from Martin Hunt:
1677 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1679 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1680 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1681 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1683 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1685 * d30v-dis.c (print_insn): First operand of d*i (delayed
1686 branch) instructions is relative.
1688 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1689 (d30v_operand_table): Add IMM6S3 type.
1690 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1692 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1693 and cmp instructions.
1695 * d30v-opc.c: Correct entries for repeat*, and sat*.
1696 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1697 types. Correct several formats.
1699 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1701 * d30v-opc.c (pre_defined_registers): Change control registers.
1703 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1704 SHORT_C2. Manual was incorrect.
1706 * d30v-dis.c (lookup_opcode): Return value now indicates
1707 if an opcode has a short and a long form. Used for deciding
1708 to append a ".s" or ".l".
1709 (print_insn): Append a ".s" to an instruction if it is
1710 the short form and ".l" if it is a long form. Do not append
1711 anything if the instruction has only one possible size.
1713 * d30v-opc.c: Change mulx2h to require an even register.
1714 New form: SHORT_A2; a SHORT_A form that needs an even
1715 register as the first operand.
1717 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1718 instruction was not being disassembled if there were an odd
1719 number of instructions.
1721 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1723 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1725 * v850-dis.c (disassemble): Improved display of register lists.
1727 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1729 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1730 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1731 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1732 fandnot1s, fandnot2s.
1734 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1736 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1738 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1740 * cgen-asm.c (cgen_parse_address): New argument resultp.
1741 All callers updated.
1742 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1744 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1746 * mn10200-dis.c (disassemble): PC relative instructions are
1747 relative to the next instruction, not the current instruction.
1749 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1751 * v850-dis.c (disassemble): Only signed extend values that are not
1752 returned by extract functions.
1753 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1755 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1757 * v850-opc.c: Update comments. Remove use of
1758 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1760 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1762 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1764 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1766 * configure: Rebuilt with latest devo autoconf for NT support.
1768 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1770 * v850-dis.c (disassemble): Use curly brace syntax for register
1773 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1774 where r0 is being used as a destination register.
1776 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1778 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1780 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1782 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1784 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1786 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1787 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1790 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1792 * configure (cgen_files): Add support for v850e target.
1793 * configure.in (cgen_files): Add support for v850e target.
1795 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1797 * configure (cgen_files): Add support for v850ea target.
1798 * configure.in (cgen_files): Add support for v850ea target.
1800 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1802 * configure.in (bfd_arc_arch): Add.
1803 * configure: Rebuild.
1804 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1805 * Makefile.in: Rebuild.
1806 * arc-dis.c, arc-opc.c: New files.
1807 * disassemble.c (ARCH_all): Define ARCH_arc.
1808 (disassembler): Add ARC support.
1810 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1812 * v850-dis.c (disassemble): Add support for v850EA instructions.
1814 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1815 (v850_opcodes): Add v850EA instructions.
1817 * v850-dis.c (disassemble): Add support for v850E instructions.
1819 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1820 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1821 insert_spe, extract_spe): New Functions.
1822 (v850_opcodes): Add v850E instructions.
1824 * v850-opc.c: Reorganised and re-layed out to improve readability
1827 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1829 * configure: Rebuild with autoconf 2.12.1.
1831 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1833 * aclocal.m4, configure: Rebuild with new automake patches.
1835 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1837 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1838 * acinclude.m4: Just include acinclude.m4 from BFD.
1839 * aclocal.m4, configure: Rebuild.
1841 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1843 * Makefile.am: New file, based on old Makefile.in.
1844 * acconfig.h: New file.
1845 * acinclude.m4: New file.
1846 * stamp-h.in: New file.
1847 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1848 Removed shared library handling; now handled by libtool. Replace
1849 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1850 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1851 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1852 handling in AC_OUTPUT.
1853 * dep-in.sed: Change .o to .lo.
1854 * Makefile.in: Now built with automake.
1855 * aclocal.m4: Now built with aclocal.
1856 * config.in, configure: Rebuild.
1858 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1860 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1862 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1864 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1866 * sparc-dis.c (sorted_opcodes): New static local.
1867 (struct opcode_hash): `opcode' is pointer to const element.
1868 (build_hash): First arg is now table of sorted pointers.
1869 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1870 (compare_opcodes): Update.
1872 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1874 * cgen-opc.c: #include <ctype.h>.
1875 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1876 Handle case insensitive hashing.
1877 (hash_keyword_value): Change type of `value' to unsigned int.
1879 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1881 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1882 precision FP, mark it as such. Likewise for double precision
1883 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1886 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1888 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1890 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1891 nesting depth when all the macros are expanded.
1893 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1895 * sparc-opc.c: The fcmp v9a instructions take an integer register
1896 as a destination, not a floating point register. From Christian
1897 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1899 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1901 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1902 syntax. From Roman Hodek
1903 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1905 * i386-dis.c (twobyte_has_modrm): Fix pand.
1907 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1909 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1911 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1913 * arm-dis.c: Add prototypes for arm_decode_shift and
1916 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1918 * mips-opc.c: Add r3900 insns.
1920 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1922 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1923 print delay slot instructions on the same line. When using a PC
1924 relative load, add a comment with the value being loaded if it can
1927 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1929 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1930 to pushS/popS for segment regs and byte constant so that
1931 pushw/popw printed when in 16 bit data mode.
1933 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1934 print cbtw, cwtd in 16 bit data mode.
1935 * i386-dis.c (putop): extra case W to support above.
1937 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1938 address size prefix in 16 bit address mode.
1940 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * sh-dis.c: Reindent. Rename local variable fprintf to
1945 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1947 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1949 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1951 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1953 * mips16-opc.c (mip16_opcodes): same.
1955 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1957 * m68k-opc.c (moveb): Change $d to %d.
1959 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1961 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1962 (twobyte_has_modrm): Likewise.
1964 (OP_MMX, OP_EM, OP_MS): New static functions.
1966 * i386-dis.c: Revert patch of April 4. The output now matches
1969 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1971 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1974 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1976 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1978 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1980 * Makefile.in (install): Depend upon installdirs.
1981 (installdirs): New target.
1983 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1985 From Thomas Graichen <graichen@rzpd.de>:
1986 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1987 * configure: Rebuild.
1989 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1991 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1992 Delete string{,s}.h support.
1994 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1996 * cgen-asm.c (cgen_parse_operand_fn): New global.
1997 (cgen_parse_{{,un}signed_integer,address}): Update call to
1998 cgen_parse_operand_fn.
1999 (cgen_init_parse_operand): New function.
2000 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2001 from cgen_asm_init_parse.
2002 (m32r_cgen_assemble_insn): New operand `errmsg'.
2003 Delete call to as_bad, return error message to caller.
2004 (m32r_cgen_asm_hash_keywords): #if 0 out.
2006 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2008 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2010 [case 'J']: Fix typo in register name.
2012 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * configure.in: Substitute SHLIB_LIBS.
2015 * configure: Rebuild.
2016 * Makefile.in (SHLIB_LIBS): New variable.
2017 ($(SHLIB)): Use $(SHLIB_LIBS).
2019 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2021 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2023 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2025 * disassemble.c (disassembler): Handle m32r.
2027 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2029 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2030 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2031 * Makefile.in (CFILES): Add them.
2032 (ALL_MACHINES): Add them.
2033 (dependencies): Regenerate.
2034 * configure.in (cgen_files): New variable.
2035 (bfd_m32r_arch): Add entry.
2036 * configure: Regenerate.
2038 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2040 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2041 * configure: Rebuild.
2043 * Makefile.in: Rebuild dependencies.
2045 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2047 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2050 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2052 * Branched binutils 2.8.
2054 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2056 * m10200-dis.c: Rename from mn10200-dis.c.
2057 * m10200-opc.c: Rename from mn10200-opc.c.
2058 * m10300-dis.c: Rename from mn10300-dis.c
2059 * m10300-opc.c: Rename from mn10300-opc.c.
2060 * Makefile.in: Update accordingly.
2062 * mips16-opc.c: Add mul and dmul macros.
2064 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2066 * makefile.vms: Update CFLAGS, add clean target.
2068 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2070 * mips-opc.c: Add "wait". From Ralf Baechle
2071 <ralf@gnu.ai.mit.edu>.
2073 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2074 * configure, config.in: Rebuild.
2075 * sysdep.h: Include <stdlib.h> if it exists.
2076 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2078 * Makefile.in: Rebuild dependencies.
2080 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2082 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2083 Andrew Bray <andy@madhouse.demon.co.uk>.
2085 * mips-opc.c: Add cast when setting mips_opcodes.
2087 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2089 * v850-dis.c (disassemble): Fix sign extension problem.
2090 * v850-opc.c (extract_d*): Fix sign extension problems to make
2091 disassembly calculate branch offsets correctly.
2093 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2097 * mips-opc.c: Add dctr and dctw.
2099 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2101 * d30v-dis.c (print_insn): Change the way signed constants
2104 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * Makefile.in (BFD_H): New variable.
2107 (HFILES): New variable.
2108 (CFILES): Add all C files.
2109 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2110 Delete old dependencies, and build new ones.
2111 * dep-in.sed: New file.
2113 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2115 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2117 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2119 * mn10200-opc.c: Change "trap" to "syscall".
2120 * mn10300-opc.c: Add new "syscall" instruction.
2122 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2124 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2125 mulul insns on the coldfire.
2127 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2129 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2130 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2131 (print_insn_little_arm): Likewise.
2133 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2135 Based on patches from H.J. Lu <hjl@lucon.org>:
2136 * i386-dis.c (fetch_data): Add prototype.
2137 * m68k-dis.c (fetch_data): Add prototype.
2138 (dummy_print_address): Add prototype. Make static.
2139 * ppc-opc.c (valid_bo): Add prototype.
2140 * sparc-dis.c (build_hash_table): Add prototype.
2141 (is_delayed_branch, compute_arch_mask): Add prototypes.
2142 (print_insn_sparc): Make several local variables const.
2143 (compare_opcodes): Change arguments to const PTR. Add prototype.
2144 * sparc-opc.c (arg): Change name field to be const.
2145 (lookup_name, lookup_value): Add prototypes. Change table and
2146 name parameters to be const.
2147 (sparc_encode_asi): Change name parameter to be const.
2148 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2149 (sparc_encode_sparclet_cpreg): Likewise.
2150 (sparc_decode_asi): Change return type to be const.
2151 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2152 (sparc_decode_sparclet_cpreg): Likewise.
2154 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2156 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2157 Solaris doesn't like the combined options, and the -f is
2159 (stamp-tshlink, install): Likewise.
2161 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2163 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2166 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2168 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2170 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2172 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2175 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2177 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2179 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2181 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2183 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2185 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2187 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2189 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2190 floatformat_to_double to make portable.
2191 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2194 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2196 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2197 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2199 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2201 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2202 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2204 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2206 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2207 (OFF_SL_BR_SCALED): ... to this, and added the flag
2208 TIC80_OPERAND_BASEREL to the flags word.
2209 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2212 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2214 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2215 Change mips_opcodes from const array to a pointer,
2216 and change bfd_mips_num_opcodes from const int to int,
2217 so that we can increase the size of the mips opcodes table
2220 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2222 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2223 store BITNUM values in the table in one's complement form
2224 to match behavior when assembler is given a raw numeric
2225 value for a BITNUM operand.
2226 * tic80-dis.c (print_operand_bitnum): Ditto.
2228 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2230 * d30v-opc.c: Removed references to FLAG_X.
2232 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2234 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2236 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2238 * Makefile.in: Added d30v object files.
2239 * configure: (bfd_d30v_arch) Rebuilt.
2240 * configure.in: (bfd_d30v_arch) Added new case.
2241 * d30v-dis.c: New file.
2242 * d30v-opc.c: New file.
2243 * disassemble.c (disassembler) Add entry for d30v.
2245 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2247 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2248 representations for the floating point BITNUM values.
2250 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2252 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2253 in the table in one's complement form, as they appear in the
2255 (tic80_symbol_to_value): Use macros to access predefined
2257 (tic80_value_to_symbol): Ditto.
2258 (tic80_next_predefined_symbol): New function.
2259 * tic80-dis.c (print_operand_bitnum): Remove code that did
2260 one's complement for BITNUM values.
2262 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2264 * makefile.vms: Remove 8 bit characters. Update to latest
2267 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2269 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2271 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2273 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2274 (IMM24_PCREL): Likewise.
2276 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2278 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2279 address for an extended PC relative instruction that is not a
2282 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2284 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2287 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2289 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2290 (tic80_opcodes): Sort entries so that long immediate forms
2291 come after short immediate forms, making it easier for
2292 assembler to select the right one for a given operand.
2294 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2296 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2298 (print_insn_mips16): Likewise.
2300 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2302 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2303 a symbol class that restricts translation to just that
2304 class (general register, condition code, etc).
2306 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2308 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2309 and REG_DEST_E for register operands that have to be
2310 an even numbered register. Add REG_FPA for operands that
2311 are one of the floating point accumulator registers.
2312 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2313 (tic80_opcodes): Change entries that need even numbered
2314 register operands to use the new operand table entries.
2315 Add "or" entries that are identical to "or.tt" entries.
2317 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2319 * mips16-opc.c: Add new cases of exit instruction for
2321 * mips-dis.c (print_mips16_insn_arg): Display floating point
2322 registers in operands of exit instruction. Print `$' before
2323 register names in operands of entry and exit instructions.
2325 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2327 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2328 pairs for all predefined symbols recognized by the assembler.
2329 Also used by the disassembling routines.
2330 (tic80_symbol_to_value): New function.
2331 (tic80_value_to_symbol): New function.
2332 * tic80-dis.c (print_operand_control_register,
2333 print_operand_condition_code, print_operand_bitnum):
2334 Remove private tables and use tic80_value_to_symbol function.
2336 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2338 * d10v-dis.c (print_operand): Change address printing
2339 to correctly handle PC wrapping. Fixes PR11490.
2341 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2343 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2346 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2348 * mips-dis.c (print_insn_mips16): Set insn_info information.
2349 (print_mips16_insn_arg): Likewise.
2351 * mips-dis.c (print_insn_mips16): Better handling of an extend
2352 opcode followed by an instruction which can not be extended.
2354 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2356 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2357 coldfire moveb instruction to not allow an address register as
2358 destination. Although the documentation does not indicate that
2359 this is invalid, experiments uncovered unexpected behavior.
2360 Added a comment explaining the situation. Thanks to Andreas
2361 Schwab for pointing this out to me.
2363 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2365 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2366 entries are presorted so that entries with the same mnemonic are
2367 adjacent to each other in the table. Sort the entries for each
2368 instruction so that this is true.
2370 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2372 * m68k-dis.c: Include <libiberty.h>.
2373 (print_insn_m68k): Sort the opcode table on the most significant
2374 nibble of the opcode.
2376 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2378 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2379 "vsub", "vst", "xnor", and "xor" instructions.
2380 (V_a1): Renamed from V_a, msb of accumulator reg number.
2381 (V_a0): Add macro, lsb of accumulator reg number.
2383 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2385 * tic80-dis.c (print_insn_tic80): Broke excessively long
2386 function up into several smaller ones and arranged for
2387 the instruction printing function to be callable recursively
2388 to print vector instructions that have both a load and a
2389 math instruction packed into a single opcode.
2390 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2391 to explain why it comes after the other vector opcodes.
2393 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2395 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2396 move insns to handle immediate operands.
2398 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2400 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2401 fix operand mask in the "moveml" entries for the coldfire.
2403 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2405 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2406 New macros for building vector instruction opcodes.
2407 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2408 FMT_LI, which were unused. The field is now a flags field.
2409 Remove some opcodes that are possible, but illegal, such
2410 as long immediate instructions with doubles for immediate
2411 values. Add "vadd" and "vld" instructions.
2413 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2415 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2416 the order more logical. Move the shift alias instructions ("rotl",
2417 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2418 interspersed with the regular sr.x and sl.x instructions. Add
2419 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2420 "sub", "subu", "swcr", and "trap".
2422 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2424 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2425 (OFF_SL_PC): Renamed from OFF_SL.
2426 (OFF_SS_BR): New operand type for base relative operand.
2427 (OFF_SL_BR): New operand type for base relative operand.
2428 (REG_BASE): New operand type for base register operand.
2429 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2430 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2431 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2433 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2434 10 char field, padded with spaces on rhs, rather than a string
2435 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2436 than old TIC80_OPERAND_RELATIVE. Add support for new
2437 TIC80_OPERAND_BASEREL flag bit.
2439 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2441 * tic80-dis.c (print_insn_tic80): Print floating point operands
2443 * tic80-opc.c (SPFI): Add single precision floating point
2444 immediate operand type.
2445 (ROTATE): Add rotate operand type for shifts.
2446 (ENDMASK): Add for shifts.
2447 (n): Macro for the 'n' bit.
2448 (i): Macro for the 'i' bit.
2449 (PD): Macro for the 'PD' field.
2450 (P2): Macro for the 'P2' field.
2451 (P1): Macro for the 'P1' field.
2452 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2455 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2457 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2458 adding in current address for pc-relative operands.
2460 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2462 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2463 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2464 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2465 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2466 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2467 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2468 (REG_SCALED, LSI_SCALED): New operand types.
2469 (E): New macro for 'E' bit at bit 27.
2470 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2471 opcodes, including the various size flavors (b,h,w,d) for
2472 the direct load and store instructions.
2474 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2476 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2478 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2479 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2480 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2481 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2482 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2483 masks with "MASK_* & ~M_*" to get the M bit reset.
2484 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2486 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2488 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2489 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2490 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2492 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2493 CC, SICR, and LICR table entries.
2494 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2495 "bcnd", and "brcr" opcodes.
2497 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2499 * ppc-opc.c (powerpc_operands): Make comment match the
2500 actual fields (no shift field).
2501 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2502 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2503 partial implementation, work in progress.
2504 * tic80-opc.c (tic80_operands): Begin construction operands table.
2505 (tic80_opcodes): Continue populating opcodes table and start
2506 filling in the operand indices.
2507 (tic80_num_opcodes): Add this.
2509 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2511 * m68k-opc.c: Add #B case for moveq.
2513 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2515 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2516 before they are used.
2518 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2520 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2521 for "breakpoint" instruction.
2523 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2525 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2526 (dep): Use ALL_CFLAGS rather than CFLAGS.
2528 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2530 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2533 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2535 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2536 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2538 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2540 * mips16-opc.c: Add "abs".
2542 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2544 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2545 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2546 (disassembler): Add bfd_arch_tic80 support to set disassemble
2547 to print_insn_tic80.
2548 * tic80-dis.c (print_insn_tic80): Add stub.
2550 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2552 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2553 * configure: Regenerate with autoconf.
2554 * tic80-dis.c: Add file.
2555 * tic80-opc.c: Add file.
2557 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2559 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2561 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2563 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2564 (mn10200_opcodes): Use it for some logicals and btst insns.
2565 Add "break" and "trap" instructions.
2567 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2569 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2571 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2573 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2574 relative load or add now depends upon whether the instruction is
2577 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2579 * mn10200-dis.c: Finish writing disassembler.
2580 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2581 Fix mask for "jmp (an)".
2583 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2584 handle endianness issues for mn10300.
2586 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2588 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2590 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2591 instruction. Fix opcode field for "movb (imm24),dn".
2593 * mn10200-opc.c (mn10200_operands): Fix insertion position
2596 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2598 * mn10200-opc.c: Create mn10200 opcode table.
2599 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2600 but moving along nicely.
2602 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2604 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2606 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2608 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2609 specifiers for fmovem* instructions.
2611 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2613 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2615 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2617 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2620 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2622 * mn10300-opc.c: Add some comments explaining the various
2625 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2627 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2629 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2632 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2633 operand specifiers in fmovm* instructions.
2635 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2637 * ppc-opc.c (insert_li): Give an error if the offset has the two
2638 least significant bits set.
2640 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2642 * mips-dis.c (print_insn_mips16): Separate the instruction from
2643 the arguments with a tab, not a space.
2645 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2647 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2650 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2653 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2655 * configure: Rebuild with autoconf 2.12.
2657 Add support for mips16 (16 bit MIPS implementation):
2658 * mips16-opc.c: New file.
2659 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2660 (mips16_reg_names): New static array.
2661 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2662 after seeing a 16 bit symbol.
2663 (print_insn_little_mips): Likewise.
2664 (print_insn_mips16): New static function.
2665 (print_mips16_insn_arg): New static function.
2666 * mips-opc.c: Add jalx instruction.
2667 * Makefile.in (mips16-opc.o): New target.
2668 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2669 * configure: Rebuild.
2671 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2673 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2674 operand specifiers in *save, *restore and movem* instructions.
2676 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2679 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2680 register operands for immediate arithmetic, not, neg, negx, and
2681 set according to condition instructions.
2683 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2684 specifier of the effective-address operand in immediate forms of
2685 arithmetic instructions. The specifier for the immediate operand
2686 notes how and where the constant will be stored.
2688 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2690 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2693 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2696 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2698 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2700 * mn10300-dis.c (disassemble): Handle register lists.
2702 * mn10300-opc.c: Fix handling of register list operand for
2703 "call", "ret", and "rets" instructions.
2705 * mn10300-dis.c (disassemble): Print PC-relative and memory
2706 addresses symbolically if possible.
2707 * mn10300-opc.c: Distinguish between absolute memory addresses,
2708 pc-relative offsets & random immediates.
2710 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2712 (disassemble): Handle SPLIT and EXTENDED operands.
2714 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2716 * mn10300-dis.c: Rough cut at printing some operands.
2718 * mn10300-dis.c: Start working on disassembler support.
2719 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2721 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2723 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2725 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2727 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2729 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2731 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2732 register argument is calls and jmp instructions.
2734 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2736 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2737 getx operand. Fix opcode for mulqu imm,dn.
2739 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2742 in MN10300_OPERAND_SPLIT operands for how many bits
2743 appear in the basic insn word. Add IMM32_HIGH24,
2744 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2745 (mn10300_opcodes): Use new operands as needed.
2747 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2748 for bset, bclr, btst instructions.
2749 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2751 * mn10300-opc.c (mn10300_operands): Remove many redundant
2752 operands. Update opcode table as appropriate.
2753 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2754 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2756 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2758 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2759 operands (for indexed load/stores). Fix bitpos for DI
2760 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2761 few instructions that insert immediates/displacements in the
2762 middle of the instruction. Add IMM8E for 8 bit immediate in
2763 the extended part of an instruction.
2764 (mn10300_operands): Use new opcodes as appropriate.
2766 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2768 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2769 sequential so the assembler never parallelizes it with
2772 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2774 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2775 a data/address register that appears in register field 0
2776 and register field 1.
2777 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2779 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2781 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2782 standard disassembly.
2784 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2785 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2786 Recategorize PALcode instructions.
2788 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2790 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2792 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2794 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2795 there are no operand types.
2797 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2799 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2801 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2803 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2805 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2807 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2809 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2810 and sst.w instructions.
2812 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2815 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2817 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2820 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2822 * ppc-opc.c (PPCPWR2): Define.
2823 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2826 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2828 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2829 field for movhu instruction.
2831 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2832 cast value to "long" not "signed long" to keep hpux10
2835 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2837 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2840 * mn10300-opc.c (FMT*): Remove definitions.
2842 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2843 for shift-by-register opcodes.
2845 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2846 into [AD][MN][01] for encoding the position of the register
2849 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2851 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2852 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2854 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2856 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2857 Fix various typos. Add "PAREN" operand.
2858 (MEM, MEM2): Define.
2859 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2860 operands. Fix several typos.
2862 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2865 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2867 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2868 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2870 (mn10300_opcodes): Break opcode format out into its own field.
2871 Update many operand fields to deal with signed vs unsigned
2872 issues. Fix one or two typos in the "mov" instruction
2873 opcode, mask and/or operand fields.
2875 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2877 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2878 m68851 wasn't reset.
2880 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2882 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2883 all opcodes. Very rough cut at operands for all opcodes.
2885 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2888 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2890 * mn10200-opc.c, mn10300-opc.c: New files.
2891 * mn10200-dis.c, mn10300-dis.c: New files.
2892 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2893 * disassemble.c: Break mn10x00 support into 10200 and 10300
2895 * configure.in: Likewise.
2896 * configure: Rebuilt.
2898 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2900 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2902 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2904 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2906 * disassemble (ARCH_mn10x00): Define.
2907 (disassembler): Handle bfd_arch_mn10x00.
2908 * configure.in: Recognize bfd_mn10x00_arch.
2909 * configure: Rebuilt.
2911 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2913 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2914 accordingly. Don't declare functions using op_rtn.
2916 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2918 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2919 params to be more standard.
2920 * (disassemble): Print absolute addresses and symbolic names for
2921 branch and jump targets.
2922 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2924 * (v850_opcodes): Add breakpoint insn.
2926 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2928 * m68k-opc.c: Move the fmovemx data register cases before the
2929 other cases, so that they get recognized before the data register
2930 does gets treated as a degenerate register list.
2932 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2934 * mips-opc.c: Add a case for "div" and "divu" with two registers
2935 and a destination of $0.
2937 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2939 * mips-dis.c (print_insn_arg): Add prototype.
2940 (_print_insn_mips): Ditto.
2942 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2944 * mips-dis.c (print_insn_arg): Print condition code registers as
2947 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2949 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2951 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2953 * v850-dis.c (disassemble): Make static. Provide prototype.
2955 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2957 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2960 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2962 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2963 ']' characters into the output stream.
2964 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2965 Add "memop" field to all opcodes (for the disassembler).
2966 Reorder opcodes so that "nop" comes before "mov" and "jr"
2967 comes before "jarl".
2969 * v850-dis.c (print_insn_v850): Fix typo in last change.
2971 * v850-dis.c (print_insn_v850): Properly handle disassembling
2972 a two byte insn at the end of a memory region when the memory
2973 region's size is only two byte aligned.
2975 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2977 * v850-dis.c (v850_reg_names): Define.
2978 (v850_sreg_names, v850_cc_names): Likewise.
2979 (disassemble): Very rough cut at printing operands (unformatted).
2981 * v850-opc.c (BOP_MASK): Fix.
2982 (v850_opcodes): Fix mask for jarl and jr.
2984 * v850-dis.c: New file. Skeleton for disassembler support.
2985 * Makefile.in Remove v850 references, they're not needed here.
2986 * configure.in: Add v850-dis.o when building v850 toolchains.
2987 * configure: Rebuilt.
2988 * disassemble.c (disassembler): Call v850 disassembler.
2990 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2991 (insert_d8_6, extract_d8_6): New functions.
2992 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2993 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2995 (IF4A, IF4B): Use "D7" instead of "D7S".
2996 (IF4C, IF4D): Use "D8_7" instead of "D8".
2997 (IF4E, IF4F): New. Use "D8_6".
2998 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2999 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3001 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3002 (v850_operands): Change D16 to D16_15, use special insert/extract
3003 routines. New new D16 that uses the generic insert/extract code.
3004 (IF7A, IF7B): Use D16_15.
3005 (IF7C, IF7D): New. Use D16.
3006 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3008 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3009 message. Issue an error if the branch offset is odd.
3011 * v850-opc.c: Add notes about needing special insert/extract
3012 for all the load/store insns, except "ld.b" and "st.b".
3014 * v850-opc.c (insert_d22, extract_d22): New functions.
3015 (v850_operands): Use insert_d22 and extract_d22 for
3017 (insert_d9): Fix range check.
3019 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3021 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3022 and set bits field to D9 and D22 operands.
3024 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3026 * v850-opc.c (v850_operands): Define SR2 operand.
3027 (v850_opcodes): "ldsr" uses R1,SR2.
3029 * v850-opc.c (v850_opcodes): Fix opcode specs for
3030 sld.w, sst.b, sst.h, sst.w, and nop.
3032 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3034 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3035 end of the opcode table.
3037 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3039 * d10v-opc.c (pre_defined_registers): Added register pairs,
3040 "r0-r1", "r2-r3", etc.
3042 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3044 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3045 Create I16U for an unsigned 16bit mmediate operand.
3046 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3048 * v850-opc.c (v850_operands): Define EP operand.
3049 (IF4A, IF4B, IF4C, IF4D): Use EP.
3051 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3052 with immediate operand, "movhi". Tweak "ldsr".
3054 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3055 correct. Get sld.[bhw] and sst.[bhw] closer.
3057 * v850-opc.c (v850_operands): "not" is a two byte insn
3059 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3061 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3063 * v850-opc.c (two): Get order of words correct.
3065 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3067 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3068 register source and destination operands.
3069 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3071 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3072 same thinko in "trap" opcode.
3074 * v850-opc.c (v850_opcodes): Add initializer for size field
3077 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3078 Add D8 for 8-bit unsigned field in short load/store insns.
3079 (IF4A, IF4D): These both need two registers.
3080 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3081 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3082 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3083 for "ldsr" and "stsr".
3084 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3087 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3088 short store word (sst.w).
3090 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3092 * v850-opc.c (v850_operands): Added insert and extract fields,
3093 pointers to functions that handle unusual operand encodings.
3095 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3097 * v850-opc.c (v850_opcodes): Enable "trap".
3099 * v850-opc.c (v850_opcodes): Fix order of displacement
3100 and register for "set1", "clr1", "not1", and "tst1".
3102 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3104 * v850-opc.c (v850_operands): Add "B3" support.
3105 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3108 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3110 * v850-opc.c: Close unterminated comment.
3112 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3114 * v850-opc.c (v850_operands): Add flags field.
3115 (v850_opcodes): add move opcodes.
3117 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3119 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3120 * configure: (bfd_v850v_arch) Add new case.
3121 * configure.in: (bfd_v850_arch) Add new case.
3122 * v850-opc.c: New file.
3124 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3126 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3128 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3130 * d10v-opc.c: Add additional information to the opcode
3131 table to help determinine which instructions can be done
3134 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3136 * mpw-make.sed: Update editing of include pathnames to be
3139 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3141 * arm-opc.h: Added "bx" instruction definition.
3143 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3145 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3147 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3149 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3151 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3153 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3155 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3157 * makefile.vms: Update for alpha-opc changes.
3159 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3161 * i386-dis.c (print_insn_i386): Actually return the correct value.
3162 (ONE, OP_ONE): #ifdef out; not used.
3164 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3166 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3167 Changed subi operand type to treat 0 as 16.
3169 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3171 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3174 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3176 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3177 memory transfer instructions. Add new format string entries %h and %s.
3178 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3181 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3183 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3184 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3186 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3188 * alpha-dis.c (print_insn_alpha_osf): Remove.
3189 (print_insn_alpha_vms): Remove.
3190 (print_insn_alpha): Make globally visible. Chose the register
3191 names based on info->flavour.
3192 * disassemble.c: Always return print_insn_alpha for the alpha.
3194 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3196 * d10v-dis.c (dis_long): Handle unknown opcodes.
3198 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3200 * d10v-opc.c: Changes to support signed and unsigned numbers.
3201 All instructions with the same name that have long and short forms
3202 now end in ".l" or ".s". Divs added.
3203 * d10v-dis.c: Changes to support signed and unsigned numbers.
3205 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3207 * d10v-dis.c: Change all functions to use info->print_address_func.
3209 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3211 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3212 move ccr/sr insns more strict so that the disassembler only
3213 selects them when the addressing mode is data register.
3215 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3216 * d10v-opc.c (pre_defined_registers): Declare.
3217 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3218 to pick a better name for the registers.
3220 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3222 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3223 operands for fexpand and fpmerge. From Christian Kuehnke
3224 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3226 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3228 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3229 print routine. Take new regnames and cpumask arguments.
3230 Kill the environment variable nonsense.
3231 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3232 (print_insn_alpha_vms): New function. Do VMS style regnames.
3233 * disassemble.c (disassembler): Test bfd flavour to pick
3234 between OSF and VMS routines. Default to OSF.
3236 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3238 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3239 * configure: Rebuild.
3240 * Makefile.in (install): Use @INSTALL_SHLIB@.
3242 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3244 * configure: (bfd_d10v_arch) Add new case.
3245 * configure.in: (bfd_d10v_arch) Add new case.
3246 * d10v-dis.c: New file.
3247 * d10v-opc.c: New file.
3248 * disassemble.c (disassembler) Add entry for d10v.
3250 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3252 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3253 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3255 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3257 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3258 distinguish between variants of the instruction set.
3259 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3260 distinguish between variants of the instruction set.
3262 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3264 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3265 the 8086 instruction set.
3266 * i386-dis.c: General cleanups. Make most things static. Add
3267 prototypes. Get rid of static variables aflags and dflags. Pass
3268 them as args (to almost everything).
3270 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3272 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3274 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3276 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3277 if the next arg is marked with SRC_IN_DST. Gross.
3279 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3280 we're looking for and find EXR.
3282 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3283 if we're looking for KBIT and we don't find it.
3285 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3288 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3289 3bit immediate operands.
3291 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * Released binutils 2.7.
3295 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3296 <kkaempf@progis.ac-net.de>.
3298 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3302 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3304 * sparc-dis.c (print_insn_sparclite): New routine to print
3305 sparclite instructions.
3307 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3309 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3311 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3313 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3314 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3315 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3317 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3319 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3320 Use autoconf-set values.
3321 (docdir, oldincludedir): Removed.
3322 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3324 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3326 * alpha-opc.c: New file.
3327 * alpha-opc.h: Remove.
3328 * alpha-dis.c: Complete rewrite to use new opcode table.
3329 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3330 * configure: Rebuild with autoconf 2.10.
3331 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3332 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3334 (alpha-opc.o): New target.
3336 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3338 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3339 Set imm_added_to_rs1 even if the source and destination register
3342 * sparc-opc.c: Add some two operand forms of the wr instruction.
3344 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3346 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3349 * disassemble.c (disassembler): Handle H8/S.
3350 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3352 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * sparc-opc.c: Add beq/teq as aliases for be/te.
3356 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3357 <sergei@msil.sps.mot.com>.
3359 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3361 * makefile.vms: New file.
3363 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3365 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3367 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3370 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3372 * i386-dis.c (OP_OFF): Call append_prefix.
3374 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3376 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3377 unsigned long to silence a warning from the Solaris PowerPC
3380 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3382 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3384 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3386 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3388 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3389 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3390 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3391 cpush, cpusha, cpull sparclet insns.
3393 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3395 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3397 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3399 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3400 Set F_FLOAT on other floating point instructions.
3402 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3404 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3406 (powerpc_opcodes): Add 860/821 specific SPRs.
3408 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3410 * configure.in: Permit --enable-shared to specify a list of
3411 directories. Set and substitute BFD_PICLIST.
3412 * configure: Rebuild.
3413 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3414 uses. Set to @BFD_PICLIST@.
3416 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3418 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3419 not "abs", which may be needed for the absolute in something
3420 like btst #0,@10:8. Print L_3 immediates separately from other
3421 immediates. Change ABSMOV reference to ABS8MEM.
3423 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3425 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3426 (current_arch_mask): New static global.
3427 (compute_arch_mask): New static function.
3428 (print_insn_sparc): Delete sparc_v9_p. New static local
3429 current_mach. Resort opcode table if current_mach changes.
3430 Generalize "insn not supported" test.
3431 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3432 Delete test for v9/!v9.
3433 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3435 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3436 (brfcx): Renamed to FBRX.
3437 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3438 coprocessor mnemonics are not supported on the sparclet).
3439 (condf): Renamed to CONDF.
3440 (SLCBCC2): Delete F_ALIAS flag.
3442 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3444 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3445 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3447 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3449 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3450 that the shared library version number is set correctly.
3452 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3455 Miles Bader <miles@gnu.ai.mit.edu>.
3456 * configure: Rebuild.
3458 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3460 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3463 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3465 * configure: Rebuild with autoconf 2.8.
3467 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3469 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3470 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3472 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3474 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3475 since they appear as targets in Makefile.in.
3476 * configure: Rebuild.
3478 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3480 * mpw-make.sed: Edit out shared library support bits.
3482 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3484 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3485 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3486 (sparc_opcodes): Add sparclet insns.
3487 (sparclet_cpreg_table): New static local.
3488 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3489 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3491 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3493 * i386-dis.c (index16): New static variable.
3494 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3496 (OP_indirE): Return result of OP_E.
3497 (OP_E): Check for 16 bit addressing mode, and disassemble
3498 correctly. Optimised 32 bit case a little. Don't print
3499 "(base,index,scale)" when sib specifies only an offset.
3501 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3503 * configure.in: Set and substitute SHLIB_DEP.
3504 * configure: Rebuild.
3505 * Makefile.in (SHLIB_DEP): New variable.
3506 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3507 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3508 COMMON_SHLIB, add them to piclist with appropriate modifications.
3509 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3510 here: just use piclist.
3512 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3514 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3515 (print_insn_sparc): Rewrite v9/not-v9 tests.
3516 (compare_opcodes): Likewise.
3517 * sparc-opc.c (MASK_<ARCH>): Define.
3518 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3519 (sparclet,v6notv9): Define.
3520 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3521 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3523 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * configure.in: Call AC_PROG_CC before configure.host.
3526 * configure: Rebuild.
3528 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3530 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3532 * i386-dis.c (onebyte_has_modrm): New static array.
3533 (twobyte_has_modrm): New static array.
3534 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3536 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3538 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3541 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3543 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3546 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3548 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3549 m68010up, not just m68020up | cpu32.
3551 * Makefile.in (SONAME): New variable.
3552 ($(SHLINK)): Make a link to the transformed name, as well.
3553 (stamp-tshlink): New target.
3554 (install): Skip stamp-tshlink during install.
3556 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * configure.in: Call AC_ARG_PROGRAM.
3559 * configure: Rebuild.
3560 * Makefile.in (program_transform_name): New variable.
3561 (install): Transform library name before installing it.
3563 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3565 * i960-dis.c (mem): Add HX dcinva instruction.
3567 Support for building as a shared library, based on patches from
3568 Alan Modra <alan@spri.levels.unisa.edu.au>:
3569 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3570 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3571 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3572 * configure: Rebuild.
3573 * Makefile.in (ALLLIBS): New variable.
3574 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3575 (COMMON_SHLIB, SHLINK): New variables.
3576 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3577 (STAGESTUFF): Remove variable.
3578 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3579 (stamp-piclist, piclist): New targets.
3580 ($(SHLIB), $(SHLINK)): New targets.
3581 ($(OFILES)): Depend upon stamp-picdir.
3582 (disassemble.o): Build twice if PICFLAG is set.
3583 (MOSTLYCLEAN): Add pic/*.o.
3584 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3585 (distclean): Remove pic and stamp-picdir.
3586 (install): Install shared libraries.
3587 (stamp-picdir): New target.
3589 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3591 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3592 Print unknown instruction as "unknown", rather than in hex.
3594 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3596 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3598 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3600 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3602 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3604 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3605 when necessary. From Ulrich Drepper
3606 <drepper@myware.rz.uni-karlsruhe.de>.
3608 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3610 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3611 sparc_num_opcodes. Update architecture enum values.
3612 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3613 (sparc_opcode_lookup_arch): New function.
3614 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3615 (sparc_opcodes): Add v9a shutdown insn.
3617 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3619 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3620 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3622 (print_insn_sparc64): Deleted.
3623 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3626 * sparc-opc.c (architecture_pname): Add v9a.
3628 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3630 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3631 incorrectly defined as 0x16 when it should be 0x15.
3632 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3633 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3634 excb (exception barrier) which is defined in the Alpha
3635 Architecture Handbook version 2.
3636 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3637 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3638 disassembled as or, for example.
3640 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3642 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3643 (_print_insn_mips): Change i from int to unsigned int.
3645 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3647 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3648 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3650 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3652 * i386-dis.c: Added Pentium Pro instructions.
3654 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3656 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3659 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3661 * sh-opc.h (sh_nibble_type): Added REG_B.
3662 (sh_arg_type): Added A_REG_B.
3663 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3665 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3667 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3669 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3671 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3673 * Makefile.in (distclean): Remove stamp-h. From Ronald
3674 F. Guilmette <rfg@monkeys.com>.
3676 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3678 From David Mosberger-Tang <davidm@azstarnet.com>:
3679 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3682 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3684 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3685 (sh_table): Added many SH3 opcodes.
3686 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3688 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3690 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3691 (subco,subco.): Mark this PPC, not PPCCOM.
3693 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3695 * configure: Rebuild with autoconf 2.7.
3697 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3699 * configure: Rebuild with autoconf 2.6.
3701 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3703 * configure.in: Sort list of architectures. Accept but do nothing
3704 for alliant, convex, pyramid, romp, and tahoe.
3706 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3708 * a29k-dis.c (print_special): Change num to unsigned int.
3710 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3712 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3715 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3717 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3718 * configure: Rebuilt.
3720 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3722 * configure.in: Add case for bfd_i860_arch.
3723 * configure: Rebuild.
3725 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3727 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3728 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3729 (NEXTDOUBLE): Likewise.
3730 (print_insn_m68k): Don't match fmoveml if there is more than one
3731 register in the list.
3732 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3734 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3736 * m68k-opc.c: Use #W rather than #w.
3737 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3739 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3741 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3742 and likewise for all the dbxx opcodes.
3744 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3746 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3748 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3750 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3751 the VR4100 specific instructions to the mips_opcodes structure.
3753 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3755 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3756 ugly Metrowerks bug in CW6, is fixed in CW7.
3758 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3760 * ppc-opc.c (whole file): Add flags for common/any support.
3762 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3764 * Makefile.in (BISON): Remove macro.
3765 (FLAGS_TO_PASS): Remove BISON.
3767 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3769 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3771 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3772 instructions that take no args by looking at the match mask.
3773 (print_insn_arg): Always print "%" before register names.
3774 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3775 [case '_']: Don't print "@#" before address.
3776 [case 'J']: Use "%s" as format string, not register name.
3777 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3779 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3781 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3784 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3786 From David Mosberger-Tang <davidm@azstarnet.com>
3788 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3789 (alpha_insn_set): added definitions for VAX floating point
3790 instructions (Unix compilers don't generate these, but handcoded
3791 assembly might still use them).
3793 * alpha-dis.c (print_insn_alpha): added support for disassembling
3794 the miscellaneous instructions in the Alpha instruction set.
3796 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3798 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3799 no longer create sysdep.h, sed ppc-opc.c to work around a
3800 serious Metrowerks C bug.
3801 * mpw-make.in: Remove.
3802 * mpw-make.sed: New file, used by mpw-configure to edit
3803 Makefile.in into an MPW makefile.
3805 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3807 * Makefile.in (maintainer-clean): New synonym for realclean.
3809 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3811 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3812 which use '0', '1', and '2' instead. Specify the proper size for
3813 a pmove immediate operand. Correct the pmovefd patterns to be
3814 moves to a register, not from a register.
3815 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3817 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3819 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3820 %psr, %wim, %tbr as F_NOTV9.
3822 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3824 * Makefile.in (Makefile): Just rebuild Makefile when running
3826 (config.h, stamp-h): New targets.
3827 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3828 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3829 rebuilding config.h.
3830 * configure: Rebuild.
3832 * mips-opc.c: Change unaligned loads and stores with "t,A"
3833 operands to use "t,A(b)".
3835 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3837 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3839 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3841 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3842 until 3 instead of until 2.
3844 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3846 * Makefile.in (ALL_CFLAGS): Define.
3847 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3848 (MOSTLYCLEAN): Add config.log.
3849 (distclean): Don't remove config.log.
3850 * configure.in: Substitute HDEFINES.
3851 * configure: Rebuild.
3853 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3855 * sh-opc.h (sh_arg_type): Add F_FR0.
3856 (sh_table, case fmac): Add F_FR0 as first argument.
3858 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3860 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3862 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3864 * sparc-dis.c: Remove all references to NO_V9.
3866 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3868 * aclocal.m4: Just include ../bfd/aclocal.m4.
3869 * configure: Rebuild.
3871 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3873 * sparc-dis.c (X_DISP19): Define.
3874 (print_insn, case 'G'): Use it.
3875 (print_insn, case 'L'): Sign extend displacement.
3877 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3879 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3880 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3881 host_makefile_frag or frags.
3882 * aclocal.m4: New file.
3883 * configure: Rebuild.
3884 * Makefile.in (INSTALL): Set to @INSTALL@.
3885 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3886 (INSTALL_DATA): Set to @INSTALL_DATA@.
3888 (AR_FLAGS): Set to rc rather than qc.
3889 (CC): Define as @CC@.
3890 (CFLAGS): Set to @CFLAGS@.
3891 (@host_makefile_frag@): Remove.
3892 (config.status): Remove dependency upon @frags@.
3894 * configure.in: ../bfd/config.bfd now just sets shell variables.
3895 Use them rather than looking through target Makefile fragments.
3896 * configure: Rebuild.
3898 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3900 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3902 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3904 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3905 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3908 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3909 (lookup_{name,value}): New functions.
3910 (prefetch_table): New static local.
3911 (sparc_{encode,decode}_prefetch): New functions.
3912 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3914 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3916 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3919 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3921 * sh-dis.c: Correct comment on first line of file.
3923 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3925 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3927 * sparc-opc.c (asi, membar): New static locals.
3928 (sparc_{encode,decode}_{asi,membar}): New functions.
3929 (sparc_opcodes, membar insn): Fix.
3930 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3931 Support decoding of membar masks.
3934 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3936 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3938 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3940 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3941 and likewise for the other branches. Add bhs as an alias for bcc,
3942 and likewise for the size variants. Add dbhs as an alias for
3945 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3947 * sh-opc.h (FP sts instructions): Update to match reality.
3949 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3951 * m68k-dis.c: (fpcr_names): Add % before all register names.
3952 (reg_names): Likewise.
3953 (print_insn_arg): Don't explicitly print % before register names.
3954 Add % before register names in static array names. In case 'r',
3955 print data registers as `@(Dn)', not `Dn@'. When printing a
3956 memory address, don't print @# before it.
3957 (print_indexed): Change base_disp and outer_disp from int to
3958 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3959 syntax. Sign extend 8 byte displacement correctly.
3960 (print_base): Print using MIT syntax. Print zpc when appropriate.
3961 Change parameter disp from int to bfd_vma.
3963 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3966 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3968 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3969 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3970 * sh-opc.h (sh_arg_type): Add new operand types.
3971 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3973 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3975 * Makefile.in (distclean): Remove generated file config.h.
3977 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3979 * Makefile.in (distclean): Remove generated file config.h.
3981 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3983 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3985 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3987 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3988 rather than numopcodes. Use m68k_opcodes rather than removed
3989 opcode function. Don't check F_ALIAS.
3990 (print_insn_arg): Change first parameter to be const char *.
3991 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3992 (m68k-opc.o): New target.
3993 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3994 * configure: Rebuild.
3996 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3998 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3999 (opcode_bits, opcode_hash_table): New variables.
4000 (opcodes_initialized): Renamed from opcodes_sorted.
4001 (build_hash_table): New function.
4002 (is_delayed_branch): Use hash table.
4003 (print_insn): Renamed from print_insn_sparc, made static.
4004 Build and use hash table. If !sparc64, ignore sparc64 insns,
4005 and vice-versa if sparc64.
4006 (print_insn_sparc, print_insn_sparc64): New functions.
4007 (compare_opcodes): Move sparc64 opcodes to end.
4008 Print commutative insns with constant second.
4009 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4011 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4013 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4014 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4015 avoids printing a delay slot in a delay slot.
4016 * sh-opc.h (sh_table): Fully bracket last entry.
4018 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4020 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4022 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4024 * configure.in: Get host_makefile_frag from ${srcdir}.
4026 * configure.in: Autoconfiscated. Check for string[s].h. Create
4027 config.h from config.in. Don't set up sysdep.h link.
4028 * sysdep.h: New file.
4029 * configure, config.in: New files, generated from configure.in.
4030 * Makefile.in: Updated to be processed autoconf-style.
4031 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4032 (Makefile): Depend on config.status.
4033 (config.status): New rule.
4034 * configure.bat: Update Makefile substitutions.
4036 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4038 * mips-opc.c (L1): Define.
4039 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4040 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4043 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4045 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4046 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4047 have multiple add units but only a single logical unit.
4049 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4050 shifted by 18, without any insertion or extraction function.
4051 (insert_cr, extract_cr): Remove.
4053 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4055 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4058 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4060 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4061 * sh-opc.h: Add copyright.
4063 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4065 * Makefile.in (crunch-m68k): Delete extra target accidentally
4066 checked in a while ago.
4068 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4070 * sh-opc.h (sh_table): Add SH3 support.
4072 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4074 * sh-opc.h: Added bsrf and braf.
4076 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4078 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4079 bogus [ls]fm{ea,fd} patterns.
4081 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4082 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4083 initialize it from memory. Make function static.
4084 (print_insn_{big,little}_arm): New functions.
4085 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4086 the correct endianness.
4088 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4090 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4093 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4095 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4096 17th, so that it builds again using GCC as the compiler.
4098 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4100 * mips-dis.c (print_insn_little_mips): Cast return value from
4101 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4102 expects an unsigned long, and that might be fewer words of
4103 argument storage (e.g., if bfd_vma is long long on a 32-bit
4105 (print_insn_big_mips): Likewise with bfd_getb32 value.
4106 (_print_insn_mips): Now static.
4108 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4110 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4111 gcc memory hog problem with initializer is fixed.
4113 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4115 Merge in support for Mac MPW as a host.
4116 (Old change descriptions retained for informational value.)
4118 * mpw-config.in (archname): Compute from the config.
4119 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4121 * mpw-config.in (target_arch): Compute from canonical target.
4122 (m68k, mips, powerpc, sparc): Add architectures.
4123 * mpw-make.in (disassemble.c.o): Add.
4124 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4126 * mpw-config.in (BFD_MACHINES): Set to a default value.
4127 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4129 * mpw-make.in (CSEARCH): Add extra-include to search path.
4131 * mpw-config.in (varargs.h): Don't create.
4132 (sysdep.h): Create using forward-include.
4133 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4135 * mpw-config.in: New file, MPW version of configure.in.
4136 * mpw-make.in: New file, MPW version of Makefile.in.
4138 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4140 * alpha-dis.c (print_insn_alpha): Put empty statement after
4143 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4145 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4146 (low_sign_extend): Likewise.
4147 (get_field): Delete unused function.
4148 (set_field, deposit_14, deposit_21): Likewise.
4150 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4152 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4155 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4157 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4159 * alpha-opc.h (OSF_ASMCODE): define
4160 print pal-code names as defined in App C of the
4161 Alpha Architecture Reference Manual
4163 * alpha-dis.c: cleaned up output
4164 print stylized code forms as defined in App A.4.3 of the
4165 Alpha Architecture Reference Manual
4167 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4169 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4171 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4174 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4176 * m68k-dis.c (opcode): New function. Returns address of opcode
4177 table entry given index, even if the opcode table was split to
4178 work around gcc bugs.
4179 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4181 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4182 (reg_names): Now const.
4183 (print_insn_arg): Arrays cacheFieldName and names now const.
4184 (print_indexed): Array scales now const.
4186 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4188 * ppc-opc.c: Sort recently added instructions by minor opcode
4189 number within major opcode number.
4191 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4193 * hppa-dis.c: Include libhppa.h.
4195 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4197 * mips-opc.c: Change dli to use M_DLI, and add dla.
4199 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4201 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4203 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4205 * mips-opc.c: Add r4650 mul instruction.
4207 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4209 * mips-opc.c: Add uld and usd macros for unaligned double load and
4212 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4214 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4215 mfdcr, mtdcr, icbt, iccci.
4217 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4219 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4220 signed char fields to shorts, more portable.
4222 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4224 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4225 char fields as signed chars, since they may have negative values.
4227 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4229 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4230 (mycroft@netbsd.org).
4232 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4234 From "Logg, Ed" <elogg@ea.com>:
4235 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4236 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4239 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4241 * ppc-opc.c: Changes based on patch from David Edelsohn
4242 <edelsohn@mhpcc.edu>.
4243 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4246 (insert_tbr): New static function.
4247 (extract_tbr): New static function.
4248 (XFXFXM_MASK, XFXM): Define.
4249 (XSPRBAT_MASK, XSPRG_MASK): Define.
4250 (powerpc_opcodes): Add instructions to access special registers by
4251 name. Add mtcr and mftbu.
4253 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4255 * mips-opc.c (P3): Define.
4256 (mips_opcodes): Add mad and madu.
4258 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4260 * configure.in: Add W65 support.
4261 * disassemble.c: Likewise.
4262 * w65-opc.h, w65-dis.c: New files.
4264 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4266 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4269 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4271 * mips-opc.c: Add dli as a synonym for li.
4273 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4275 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4276 print something for reserved opcode values, even if it won't
4279 * mips-dis.c (_print_insn_mips): When initializing, shift right
4280 and mask, to avoid sign extension problems on the Alpha.
4282 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4285 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4287 * sh-opc.h (mov.l gbr): Get direction right.
4288 * sh-dis.c (print_insn_shx): New function.
4289 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4290 print opcodes with right byte order.
4292 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4294 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4295 to avoid conflicts with getopt.
4297 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4299 * hppa-dis.c (print_insn_hppa): Read the instruction using
4300 bfd_getb32, so that it works on a little endian or 64 bit host.
4301 Remove unused local variable op.
4303 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4305 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4306 addu does not work correctly if -mips3.
4308 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4310 * a29k-dis.c (print_special): Add special register names defined
4311 on 29030, 29040 and 29050.
4312 (print_insn): Handle new operand type 'I'.
4314 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4316 * Makefile.in (INSTALL): Use top level install.sh script.
4318 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4320 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4321 that it works on a little endian host.
4323 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4325 * configure.in: Use ${config_shell} when running config.bfd.
4327 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4329 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4331 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4333 * a29k-dis.c (print_insn): Print the opcode.
4335 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4337 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4339 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4341 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4343 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4345 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4346 which store a value into memory.
4348 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4350 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4351 * arm-dis.c, arm-opc.h: New files.
4353 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4355 * Makefile.in (ns32k-dis.o): Add dependency.
4356 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4357 string, not as array of chars.
4359 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4361 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4363 * sparc-opc.c: Added sparclite extended FP operations, and
4364 versions of v9 impdep* instructions permitting specification of
4367 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4369 * i960-dis.c (reg_names): Now const.
4370 (struct sparse_tabent): New type, copied from array type in mem
4372 (ctrl): Local static array ctrl_tab now const.
4373 (cobr): Local static array cobr_tab now const.
4374 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4375 static variable mem_tab no longer explicitly initialized. Changed
4376 mem_init to const array of struct sparse_tabent.
4377 (reg): Local static variable reg_tab no longer explicitly
4378 initialized. Changed reg_init to const array of struct
4380 (ea): Local static array scale_tab now const.
4382 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4385 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4387 * configure.bat: the disassember needs to be enabled for
4388 "objdump -d" to work in djgpp.
4390 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4392 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4393 (invalid_float): Enabled general version, doesn't require running
4394 on ns32k host. Changed to take char* argument, and test for
4395 explicitly specified sizes, instead of using sizeof() on host CPU
4397 (INVALID_FLOAT): Cast first argument.
4398 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4399 list_P032, list_M032): Now const.
4400 (optlist, list_search): Made appropriate arguments now point to
4402 (print_insn_arg): Changed static array of one-character-string
4403 pointers into a static const array of characters; fixed sprintf
4404 statement accordingly.
4406 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4408 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4409 from distribution. A ns32k-dis.c from a previous distribution has
4410 been brought up to date and supports the new interface.
4412 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4414 * configure.in: add bfd_ns32k_arch target support.
4416 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4417 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4419 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4421 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4424 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4426 * h8300-dis.c, mips-dis.c: Don't use true and false.
4428 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4430 * configure.in: Change --with-targets to --enable-targets.
4432 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4434 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4435 opcodes to the first instruction with that opcode, to speed
4436 disassembly of large files. From ralphc@pyramid.com (Ralph
4439 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4441 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4443 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4445 * configure.bat: update to latest makefile.in
4447 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4449 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4450 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4451 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4452 slot insn is in a delay slot.
4453 * z8k-opc.h: (resflg): Fix patterns.
4454 * h8500-opc.h Fix CR insn patterns.
4456 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4458 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4459 "cmpl" before POWER versions, so that gas -many uses them.
4461 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4463 * disassemble.c: New file.
4464 * Makefile.in (OFILES): Add disassemble.o.
4465 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4466 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4467 binutils/configure.in.
4469 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4470 opcode being examined.
4472 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4474 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4475 (insert_ral, insert_ram, insert_ras): New functions.
4476 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4477 RAS for store with update.
4479 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4481 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4482 (edelsohn@npac.syr.edu).
4484 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4486 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4489 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4491 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4493 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 * ppc-opc.c (powerpc_operands): The signedp field has been
4496 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4497 instead. Add new operand SISIGNOPT.
4498 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4499 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4500 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4503 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4505 * i386-dis.c (struct private): Renamed to dis_private. `private'
4506 is a reserved word for dynix cc.
4508 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4510 * configure.in: Change error message to refer to bfd/config.bfd
4511 rather than bfd/configure.in.
4513 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4515 * ppc-opc.c: Define POWER2 as short alias flag.
4516 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4519 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4521 * i960-dis.c (print_insn_i960): Don't read a second word for
4522 opcodes 0, 1, 2 and 3.
4524 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4526 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4528 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4530 * m68881-ext.c: Removed; no longer used.
4531 * Makefile.in: Changed accordingly.
4533 * m68k-dis.c (ext_format_68881): Don't declare.
4534 (print_insn_m68k): If an instruction uses place 'i', it uses at
4535 least four fixed bytes.
4536 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4537 extended float, convert to double using floatformat_to_double, not
4538 ieee_extended_to_double, and fetch the data before converting it.
4540 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4542 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4543 davidj@ICSI.Berkeley.EDU (David Johnson).
4545 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4547 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4548 PowerPC uses bdnz[l][a].
4550 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4552 * dis-buf.c, i386-dis.c: Include sysdep.h.
4554 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4556 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4558 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4559 by Motorola PowerPC 601 with PPC_OPCODE_601.
4560 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4561 Disassemble Motorola PowerPC 601 instructions as well as normal
4562 PowerPC instructions.
4564 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4566 * i960-dis.c (reg, mem): Just use a static array instead of
4569 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4571 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4572 condition name index if this is for a negated condition.
4574 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4575 Floating point format for 'H' operand is backwards from normal
4576 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4577 operands (fmpyadd and fmpysub), handle bizarre register
4578 translation correctly for single precision format.
4580 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4581 or 'I' operands if the next format specifier is 'M' (fcmp
4582 condition completer).
4584 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4586 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4587 single number giving a bitmask for the MB and ME fields of an M
4588 form instruction. Change NB to accept 32, and turn it into 0;
4589 also turn 0 into 32 when disassembling. Seperated SH from NB.
4590 (insert_mbe, extract_mbe): New functions.
4591 (insert_nb, extract_nb): New functions.
4592 (SC_MASK): Mask out SA and LK bits.
4593 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4594 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4595 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4596 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4597 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4598 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4599 (powerpc_macros): Define table of macro definitions.
4600 (powerpc_num_macros): Define.
4602 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4603 if PPC_OPERAND_NEXT is set.
4605 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4608 char. Retrieve contents using bfd_getl32 instead of shifting.
4610 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * ppc-opc.c: New file. Opcode table for PowerPC, including
4613 opcodes for POWER (RS/6000).
4614 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4615 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4616 (CFILES): Add ppc-dis.c.
4617 (ppc-dis.o, ppc-opc.o): New targets.
4618 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4620 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4622 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4623 No space before 'u', 'f', or 'N'.
4625 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4627 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4628 farther than we should.
4630 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4632 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4634 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4636 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4638 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4639 needs it, to prevent reading past the end of a section.
4641 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4643 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4644 Removed t,A case for la; always use t,A(b) case.
4646 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 From Ted Lemen <mellon@pepper.ncd.com>
4649 * mips-dis.c (print_insn_arg): Handle 'k'.
4650 * mips-opc.c: Make cache use k, not t.
4652 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4654 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4655 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4656 FLOAT_FORMAT_CODE to put out floating point register names.
4658 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4660 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4662 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4666 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4668 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4669 larger than 32. Moved dsxx32 variants first for disassembler.
4671 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4673 * z8kgen.c, z8k-opc.h: Add full lda information.
4675 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4677 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4678 movb instructions. Any necessary space will be emitted by
4679 the code to handle nullification completers.
4681 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4683 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4685 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4687 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4688 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4690 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4694 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4696 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4697 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4699 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4701 * m88k-dis.c (m88kdis): comment change. Remove space after
4703 (printop): handle new arg types DEC and XREG for m88110.
4705 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4707 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4708 type for absolute branch addresses. Delete special
4709 "ble" and "be" code in 'W' operand code.
4711 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * mips-opc.c: Set hazard information correctly for branch
4714 likely instructions.
4716 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4718 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4719 info->fprintf_func for printing and info->print_address_func for
4722 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4724 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4726 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4728 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4729 Corrected second case of "b" for disassembler.
4731 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4733 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4734 to BFD swapping routines to correspond to BFD name changes.
4736 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * mips-opc.c: Change div machine instruction to be z,s,t rather
4739 than s,t. Change div macro to be d,v,t rather than d,s,t.
4740 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4741 rem and remu which generates only the corresponding div
4742 instruction. This is for compatibility with the MIPS assembler,
4743 which only generates the simple machine instruction when an
4744 explicit destination of $0 is used.
4745 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4747 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4750 WR_31 hazard for bal, bgezal, bltzal.
4752 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4754 * hppa-dis.c (print_insn_hppa): Use print function
4755 from within the disassemble_info, not fprintf_filtered.
4757 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4759 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4760 Law, law@cs.utah.edu.)
4762 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * mips-opc.c ("absu"): Removed.
4767 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4770 Changed hazard information to distinguish between memory load
4771 delays and coprocessor load delays.
4773 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4775 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4777 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4779 * configure.in: Don't pass cpu to config.bfd.
4781 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * m88k-dis.c (m88kdis): Make class unsigned.
4785 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4787 * alpha-dis.c (print_insn_alpha): One branch format case was
4788 missing the instruction name.
4790 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4792 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4793 Add the arch-specific auxiliary files.
4794 (OFILES): Remove the arch-specific auxiliary files
4795 and use BFD_MACHINES instead of DIS_LIBS.
4796 * configure.in: Set BFD_MACHINES based on --with-targets option.
4798 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4800 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4803 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4805 * sparc-opc.c: Change CONST to const to deal with gcc
4806 -Dconst=__const -traditional.
4808 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4810 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4811 coprocessor instructions out of #if 0, and made them use new
4814 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4816 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4818 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4820 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4821 instruction, for use by the disassembler.
4823 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4824 hand-coded sign extensions that depended on 32-bit host ints.
4825 FIXME, we still depend on big-endian host bitfield ordering.
4826 (sparc_print_insn): Set the insn_info_valid field, and the
4827 other fields that describe the instruction being printed.
4829 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4831 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4832 `jmp' instead of just one of them.
4834 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4836 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4837 (fput_fp_reg_r): Renamed from fput_reg_r.
4838 (fput_fp_reg): New function.
4839 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4841 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4843 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4845 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4847 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4849 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4850 don't output a space.
4852 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4854 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4856 * mips-opc.c: New file, containing opcode table from
4857 ../include/opcode/mips.h.
4858 * Makefile.in: Add it.
4860 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * m88k-dis.c: New file, moved in from gdb and changed to use the
4863 new dis-asm.h disassembler interface.
4864 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4865 (m88k-dis.o): New target.
4867 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4869 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4870 argument string const char * to correspond to opcode/mips.h.
4872 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4874 * mips-dis.c: Updated to account for name changes in new version
4876 * Makefile.in: Added header file dependencies.
4878 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4880 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4882 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4884 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4885 extend, rather than shifts.
4887 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4889 * Makefile.in: Undo 15 June change.
4891 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4893 * m68k-dis.c (print_insn_arg): Change return value to byte count
4895 * m68k-dis.c: Re-write to detect invalid operands before
4896 printing anything, so we can handle this the same way we
4897 handle invalid opcodes.
4899 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4901 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4903 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4905 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4908 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4910 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4912 * configure.in: Do make sysdep.h link.
4913 * Makefile.in: Search ../include. Don't search ../bfd.
4915 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4917 Changes from Jeff Law, law@cs.utah.edu:
4918 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4919 Do not print a space before the completers specified by
4922 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4924 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4925 defined, since gdb has been fixed.
4927 Changes from Jeff Law, law@cs.utah.edu:
4928 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4929 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4930 be a *disassemble_info, not a *FILE.
4931 * hppa-dis.c: Support 'd', '!', and 'a'.
4932 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4933 * hppa-dis.c: Delete cases which are no longer needed.
4935 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4937 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4939 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4941 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4944 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4946 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4947 * configure.in: No longer need to configure to get sysdep.h.
4949 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4951 * Patches from Jeffrey Law <law@cs.utah.edu>.
4952 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4953 templates for 1.1 FP computational instructions.
4955 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4957 * h8500-dis.c (print_insn_h8500): Address argument is type
4959 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4962 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4963 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4965 * sparc-dis.c (compare_opcodes): Move static declaration to
4968 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4970 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4971 instruction, remove unimp hack from 'l' argument.
4973 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4975 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4978 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4980 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4981 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4984 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4986 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4987 arrays of string pointers to 2-d arrays of chars, to save
4990 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4992 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4993 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4995 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4997 * hppa-dis.c: New file from Utah, adapted to new disassembler
4999 * Makefile.in: Include it.
5001 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5003 * sh-dis.c, sh-opc.h: New files.
5005 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5007 * alpha-dis.c, alpha-opc.h: New files.
5009 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5011 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5014 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5016 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5018 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5020 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5023 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5025 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5026 and double percent signs a few places.
5028 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5030 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5031 Use info->print_address_func not print_address.
5033 * dis-buf.c (generic_print_address): New function.
5035 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5037 * Makefile.in: Add sparc-dis.c.
5038 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5040 Add `add' instruction to the set that get checked
5041 for a preceding `sethi' in order to print an absolute address.
5042 * (print_insn): Disassembly prefers real instructions.
5043 (is_delayed_branch): Speed up.
5044 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5045 Still missing some float ops, and needs testing.
5046 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5047 F_ALIAS. Use printf, not fprintf, when not passing a file
5049 (compare_opcodes): Check that identical instructions have
5050 identical opcodes, complain otherwise.
5053 * Include reg_names.
5055 Use dis-asm.h/read_memory_func interface.
5057 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5059 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5060 deliberately return non-zero to setjmp from longjmp. Otherwise
5061 this code fails to compile.
5063 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5065 * m68k-dis.c: Fix prototype for fetch_arg().
5067 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5069 * dis-buf.c: New file, for new read_memory_func interface.
5070 Makefile.in (OFILES): Include it.
5071 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5072 Use new read_memory_func interface.
5074 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5076 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5077 * h8500-opc.h: Fix couple of opcodes.
5079 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5081 * Makefile.in: add dvi & installcheck targets
5083 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5085 * Makefile.in: Update for h8500-dis.c.
5087 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5089 * h8500-dis.c, h8500-opc.h: New files
5091 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5093 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5094 ../include/dis-asm.h.
5095 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5096 and ../gdb/m68k-pinsn.c).
5097 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5098 and ../gdb/i386-pinsn.c).
5099 * m68881-ext.c: New file. Moved definition of
5100 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5101 * Makefile.in: Adjust for new files.
5102 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5103 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5104 can be dis-assembled.
5106 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5108 * mips-dis.c (print_insn_arg): Now returns void.
5110 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5112 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5113 files that use the macros.
5115 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5117 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5118 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5119 (CFILES): Added mips-dis.c.
5121 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5123 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5124 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5126 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5128 * Makefile.in: Improve *clean rules.
5129 * configure.in: Allow a default host.
5131 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5133 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5134 files include other sysdep files
5136 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5138 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5140 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5142 * configure.in: For host support, use ../bfd/configure.host
5143 so it stays in sync with the ../bfd/hosts database.
5145 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5147 * configure.in: use cpu-vendor-os triple instead of nested cases
5149 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5151 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5152 *always* the wrong one.
5154 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5156 * z8kgen.c: added copyright info
5158 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5160 * z8k-dis.c (unparse_instr): prettier tabs
5161 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5163 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5165 * configure.in: Add ncr* configuration.
5166 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5167 picayune ANSI compilers happy.
5169 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5171 * configure.in (i386): Make i386 and i486 synonymous for now.
5172 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5174 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5176 * Makefile.in (install): Fix typo.
5178 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5180 * Makefile.in (make): Remove obsolete crud.
5181 (sparc-opc.o): Avoid Sun Make VPATH bug.
5183 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5185 * Makefile.in: since there are no SUBDIRS, remove rule and
5186 references of subdir_do.
5188 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5190 * Makefile.in (install): Get the library name right here too.
5191 Don't install bfd.h, since it's unrelated to this library. No
5192 subdirs to recurse into, either.
5193 (CFILES): The source file has a .c suffix, not .o.
5195 * sparc-opc.c: New file, moved from BFD.
5196 * Makefile.in (OFILES): Build it.
5198 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5200 * z8k-dis.c: fixed forward refferences of some declarations.
5202 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5204 * Makefile.in: get the name of the library right
5206 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5208 * z8k-dis.c: knows how to disassemble z8k stuff
5209 * z8k-opc.h: new file full of z8000 opcodes
5213 version-control: never
projects / platform / upstream / binutils.git / blob