1 2007-05-07 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (threebyte_0x38_uses_DATA_prefix): Correct entries
4 for some SSE4 instructions.
5 (threebyte_0x3a_uses_DATA_prefix): Likewise.
7 2007-05-03 H.J. Lu <hongjiu.lu@intel.com>
9 * i386-dis.c (CRC32_Fixup): Don't print suffix in Intel mode.
11 * i386-opc.c (i386_optab): Remove IgnoreSize and correct operand
14 2007-05-01 H.J. Lu <hongjiu.lu@intel.com>
16 * i386-dis.c (CRC32_Fixup): Properly handle Intel mode and
17 check data size prefix in 16bit mode.
19 * i386-opc.c (i386_optab): Default crc32 to non-8bit and
22 2007-04-30 Mark Salter <msalter@redhat.com>
24 * frv-desc.c: Regenerate.
25 * frv-desc.h: Regenerate.
27 2007-04-30 Alan Modra <amodra@bigpond.net.au>
30 * ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE.
32 2007-04-27 H.J. Lu <hongjiu.lu@intel.com>
34 * i386-dis.c (modrm): Put reg before rm.
36 2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
39 * i386-dis.c (print_displacement): New.
40 (OP_E): Call print_displacement instead of print_operand_value
41 to output displacement when either base or index exist. Print
42 the explicit zero displacement in 16bit mode.
44 2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
47 * i386-dis.c (print_insn): Also swap the order of op_riprel
48 when swapping op_index. Break when the RIP relative address
50 (OP_E): Properly handle RIP relative addressing and print the
51 explicit zero displacement for Intel mode.
53 2007-04-27 Alan Modra <amodra@bigpond.net.au>
55 * Makefile.am: Run "make dep-am".
56 * Makefile.in: Regenerate.
57 * ns32k-dis.c: Include sysdep.h first.
59 2007-04-24 Andreas Krebbel <krebbel1@de.ibm.com>
61 * opcodes/s390-opc.c (MASK_SSF_RRDRD): Fourth nybble belongs to the
63 * opcodes/s390-opc.txt (pfpo, ectg, csst): Add new z9-ec instructions.
65 2007-04-24 Nick Clifton <nickc@redhat.com>
67 * arm-dis.c (print_insn): Initialise type.
69 2007-04-24 Alan Modra <amodra@bigpond.net.au>
71 * cgen-types.h: Include bfd_stdint.h, not stdint.h.
72 * Makefile.am: Run "make dep-am".
73 * Makefile.in: Regenerate.
75 2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
77 * m68k-opc.c: Mark mcfisa_c instructions.
79 2007-04-21 Richard Earnshaw <rearnsha@arm.com>
81 * arm-dis.c (arm_opcodes): Disassemble to unified syntax.
82 (thumb_opcodes): Add missing white space in adr.
83 (arm_decode_shift): New parameter, print_shift. Only decode the
84 shift parameter if set. Adjust callers.
85 (print_insn_arm): Support for operand type q with no shift decode.
87 2007-04-21 Alan Modra <amodra@bigpond.net.au>
89 * i386-opc.c (i386_float_regtab, i386_float_regtab_size): Delete.
91 (i386_regtab): ..here.
92 * i386-opc.h (i386_float_regtab, i386_float_regtab_size): Delete.
94 * ppc-opc.c (powerpc_operands): Delete duplicate entries.
95 (BA_MASK, FXM_MASK, STRM_MASK, VA_MASK, VB_MASK, VC_MASK): Delete.
96 (VD_MASK, WS_MASK, MTMSRD_L, XRT_L): Delete.
97 (powerpc_opcodes): Replace uses of MTMSRD_L and XRT_L.
99 2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
101 * m68k-dis.c (print_insn_arg): Show c04 as rambar0 and c05 as
104 2007-04-20 Alan Modra <amodra@bigpond.net.au>
106 * ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
108 * ppc-opc.c (powerpc_operands): Replace bit count with bit mask
109 in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
110 references to following deleted functions.
111 (insert_bd, extract_bd, insert_dq, extract_dq): Delete.
112 (insert_ds, extract_ds, insert_de, extract_de): Delete.
113 (insert_des, extract_des, insert_li, extract_li): Delete.
114 (insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
115 (insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
116 (num_powerpc_operands): New constant.
117 (XSPRG_MASK): Remove entire SPRG field.
118 (powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
120 2007-04-20 Alan Modra <amodra@bigpond.net.au>
122 * ppc-opc.c (DCM, DGM, TE, RMC, R, SP, S): Correct shift.
124 (powerpc_opcodes): Use Z2_MASK in all insns taking RMC operand.
126 2007-04-20 Richard Earnshaw <rearnsha@arm.com>
128 * arm-dis.c (print_insn): Only look for a mapping symbol in the section
131 2007-04-19 Alan Modra <amodra@bigpond.net.au>
133 * Makefile.am: Run "make dep-am".
134 * Makefile.in: Regenerate.
135 * po/POTFILES.in: Regenerate.
137 2007-04-19 Alan Modra <amodra@bigpond.net.au>
139 * ppc-opc.c (powerpc_opcodes): Add cctpl, cctpm, cctph, db8cyc,
140 db10cyc, db12cyc, db16cyc.
142 2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
144 * ppc-opc.c (powerpc_opcodes): Recognize three-operand tlbsxe.
146 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
148 * i386-dis.c (CRC32_Fixup): New.
149 (PREGRP85, PREGRP86, PREGRP87, PREGRP88, PREGRP89, PREGRP90,
151 (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.2.
152 (threebyte_0x3a_uses_DATA_prefix): Likewise.
153 (prefix_user_table): Add PREGRP85, PREGRP86, PREGRP87,
154 PREGRP88, PREGRP89, PREGRP90 and PREGRP91.
155 (three_byte_table): Likewise.
157 * i386-opc.c (i386_optab): Add SSE4.2 opcodes.
159 * i386-opc.h (CpuSSE4_2): New.
161 (CpuUnknownFlags): Add CpuSSE4_2.
163 2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
165 * i386-dis.c (XMM_Fixup): New.
171 (PREGRP39 ... PREGRP85): New.
172 (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.
173 (threebyte_0x3a_uses_DATA_prefix): Likewise.
174 (prefix_user_table): Add PREGRP39 ... PREGRP85.
175 (three_byte_table): Likewise.
177 (intel_operand_size): Handle dqb_mode, dqd_mode):
181 * i386-opc.c (i386_optab): Add SSE4.1 opcodes.
183 * i386-opc.h (CpuSSE4_1): New.
184 (CpuUnknownFlags): Add CpuSSE4_1.
185 (regKludge): Update comment.
187 2007-04-18 Matthias Klose <doko@ubuntu.com>
189 * Makefile.am (libopcodes_la_LDFLAGS): Use bfd soversion.
190 * Makefile.in: Regenerate.
192 2007-04-14 Steve Ellcey <sje@cup.hp.com>
194 * Makefile.am: Add ACLOCAL_AMFLAGS.
195 * Makefile.in: Regenerate.
197 2007-04-13 H.J. Lu <hongjiu.lu@intel.com>
199 * i386-dis.c: Remove trailing white spaces.
200 * i386-opc.c: Likewise.
201 * i386-opc.h: Likewise.
203 2007-04-11 H.J. Lu <hongjiu.lu@intel.com>
206 * i386-dis.c (GRP1a): New.
207 (GRP1b ... GRPPADLCK2): Update index.
208 (dis386): Use GRP1a for entry 0x8f.
209 (mod, rm, reg): Removed. Replaced by ...
213 2007-04-09 Kazu Hirata <kazu@codesourcery.com>
215 * m68k-dis.c (print_insn_m68k): Restore info->fprintf_func and
216 info->print_address_func if longjmp is called.
218 2007-03-29 DJ Delorie <dj@redhat.com>
220 * m32c-desc.c: Regenerate.
221 * m32c-dis.c: Regenerate.
222 * m32c-opc.c: Regenerate.
224 2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
226 * i386-opc.c (i386_optab): Change InvMem to RegMem for mov and
227 movq. Remove InvMem from sldt, smsw and str.
229 * i386-opc.h (InvMem): Renamed to ...
230 (RegMem): Update comments.
231 (AnyMem): Remove InvMem.
233 2007-03-27 Paul Brook <paul@codesourcery.com>
235 * arm-dis.c (thumb_opcodes): Add entry for undefined insns (0xbe??).
237 2007-03-24 Paul Brook <paul@codesourcery.com>
239 * arm-dis.c (coprocessor_opcodes): Remove superfluous 0x.
240 (print_insn_coprocessor): Handle %<bitfield>x.
242 2007-03-24 Paul Brook <paul@codesourcery.com>
243 Mark Shinwell <shinwell@codesourcery.com>
245 * arm-dis.c (arm_opcodes): Print SRS base register.
247 2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
249 * i386-dis.c (prefix_name): Replace rex64XYZ with rex.WRXB.
251 * i386-opc.c (i386_optab): Add rex.wrxb.
253 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
255 * i386-dis.c (REX_MODE64): Remove definition.
256 (REX_EXTX): Likewise.
257 (REX_EXTY): Likewise.
258 (REX_EXTZ): Likewise.
259 (USED_REX): Use REX_OPCODE instead of 0x40.
260 Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W,
261 REX_R, REX_X and REX_B respectively.
263 2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
266 * i386-dis.c (PREGRP38): New.
267 (dis386): Use PREGRP38 for 0x90.
268 (prefix_user_table): Add PREGRP38.
269 (print_insn): Set uses_REPZ_prefix to 1 for pause.
270 (NOP_Fixup1): Properly handle REX bits.
271 (NOP_Fixup2): Likewise.
273 * i386-opc.c (i386_optab): Allow %eax with xchg in 64bit.
274 Allow register with nop.
276 2007-03-20 DJ Delorie <dj@redhat.com>
278 * m32c-asm.c: Regenerate.
279 * m32c-desc.c: Regenerate.
280 * m32c-desc.h: Regenerate.
281 * m32c-dis.h: Regenerate.
282 * m32c-ibld.c: Regenerate.
283 * m32c-opc.c: Regenerate.
284 * m32c-opc.h: Regenerate.
286 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
288 * i386-opc.c: Include "libiberty.h".
289 (i386_regtab): Remove the last entry.
290 (i386_regtab_size): New.
291 (i386_float_regtab_size): Likewise.
293 * i386-opc.h (i386_regtab_size): New.
294 (i386_float_regtab_size): Likewise.
296 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
298 * Makefile.am (CFILES): Add i386-opc.c.
299 (ALL_MACHINES): Add i386-opc.lo.
301 * Makefile.in: Regenerated.
303 * configure.in: Add i386-opc.lo for bfd_i386_arch.
304 * configure: Regenerated.
306 * i386-dis.c: Include "opcode/i386.h".
307 (MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
308 (FWAIT_OPCODE): Remove definition.
309 (UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
310 (MAX_OPERANDS): Remove definition.
312 * i386-opc.c: New file.
313 * i386-opc.h: Likewise.
315 2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
317 * Makefile.in: Regenerated.
319 2007-03-09 H.J. Lu <hongjiu.lu@intel.com>
321 * i386-dis.c (OP_Rd): Renamed to ...
326 2007-03-08 Alan Modra <amodra@bigpond.net.au>
328 * fr30-asm.c: Regenerate.
329 * frv-asm.c: Regenerate.
330 * ip2k-asm.c: Regenerate.
331 * iq2000-asm.c: Regenerate.
332 * m32c-asm.c: Regenerate.
333 * m32r-asm.c: Regenerate.
334 * m32r-dis.c: Regenerate.
335 * mt-asm.c: Regenerate.
336 * mt-ibld.c: Regenerate.
337 * mt-opc.c: Regenerate.
338 * openrisc-asm.c: Regenerate.
339 * xc16x-asm.c: Regenerate.
340 * xstormy16-asm.c: Regenerate.
342 * Makefile.am: Run "make dep-am".
343 * Makefile.in: Regenerate.
344 * po/POTFILES.in: Regenerate.
346 2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
348 * opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
349 INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New
350 instruction formats added.
351 (MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
352 MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
354 * opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
356 * opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
357 (main): z9-ec cpu type option added.
358 * include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
360 2007-02-22 DJ Delorie <dj@redhat.com>
362 * s390-opc.c (INSTR_SS_L2RDRD): New.
363 (MASK_SS_L2RDRD): New.
364 * s390-opc.txt (pka): Use it.
366 2007-02-20 Thiemo Seufer <ths@mips.com>
367 Chao-Ying Fu <fu@mips.com>
369 * mips-dis.c (mips_arch_choices): Add DSP R2 support.
370 (print_insn_args): Add support for balign instruction.
371 * mips-opc.c (D33): New shortcut for DSP R2 instructions.
372 (mips_builtin_opcodes): Add DSP R2 instructions.
374 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
376 * s390-opc.c (INSTR_RRF_U0FR, MASK_RRF_U0FR): Removed.
377 (INSTR_RRF_U0RF, MASK_RRF_U0RF): Added.
378 * s390-opc.txt (cfxbr, cfdbr, cfebr, cgebr, cgdbr, cgxbr, cger, cgdr,
379 cgxr, cfxr, cfdr, cfer): Instruction type set to INSTR_RRF_U0RF.
381 2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
383 * s390-opc.txt ("efpc", "sfpc"): Set to RRE_RR_OPT instruction type.
384 * s390-opc.c (s390_operands): Add RO_28 as optional gpr.
385 (INSTR_RRE_RR_OPT, MASK_RRE_RR_OPT): New instruction type for efpc
388 2007-02-16 Nick Clifton <nickc@redhat.com>
391 * avr-dis.c (comment_start): New variable, contains the prefix to
392 use when printing addresses in comments.
393 (print_insn_avr): Set comment_start to an empty space if there is
394 no symbol table available as the generic address printing code
395 will prefix the numeric value of the address with 0x.
397 2007-02-13 H.J. Lu <hongjiu.lu@intel.com>
399 * i386-dis.c: Updated to use an array of MAX_OPERANDS operands
402 2007-02-05 Dave Brolley <brolley@redhat.com>
403 Richard Sandiford <rsandifo@redhat.com>
404 DJ Delorie <dj@redhat.com>
405 Graydon Hoare <graydon@redhat.com>
406 Frank Ch. Eigler <fche@redhat.com>
407 Ben Elliston <bje@redhat.com>
409 * Makefile.am (HFILES): Add mep-desc.h mep-opc.h.
410 (CFILES): Add mep-*.c
411 (ALL_MACHINES): Add mep-*.lo.
412 (CLEANFILES): Add stamp-mep.
413 (CGEN_CPUS): Add mep.
414 (MEP_DEPS): New variable.
415 (mep-*): New targets.
416 * configure.in: Handle bfd_mep_arch.
417 * disassemble.c (ARCH_mep): New macro.
418 (disassembler): Handle bfd_arch_mep.
419 (disassemble_init_for_target): Likewise.
420 * mep-*: New files for Toshiba Media Processor (MeP).
421 * Makefile.in: Regenerated.
422 * configure: Regenerated.
424 2007-02-05 H.J. Lu <hongjiu.lu@intel.com>
426 * i386-dis.c (OP_J): Undo the last change. Properly handle 64K
427 wrap around within the same segment in 16bit mode.
429 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
431 * i386-dis.c (OP_J): Mask to 16bit only if there is a data16
434 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
436 * avr-dis.c (avr_operand): Correct PR number in comment.
438 2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
440 * disassemble.c (disassembler_usage): Call
441 print_i386_disassembler_options for i386 disassembler.
443 * i386-dis.c (print_i386_disassembler_options): New.
444 (print_insn): Support the new addr64 option.
446 2007-02-02 Hiroki Kaminaga <kaminaga@sm.sony.co.jp>
448 * ppc-dis.c (powerpc_dialect): Handle ppc440.
449 * ppc-dis.c (print_ppc_disassembler_options): Note the -M440 can
452 2007-02-02 Alan Modra <amodra@bigpond.net.au>
454 * ppc-opc.c (insert_bdm): -Many comment.
455 (valid_bo): Add "extract" param. Accept both powerpc and power4
456 BO fields when disassembling with -Many.
457 (insert_bo, extract_bo, insert_boe, extract_boe): Adjust valid_bo call.
459 2007-01-08 Kazu Hirata <kazu@codesourcery.com>
461 * m68k-opc.c (m68k_opcodes): Replace cpu32 with
462 cpu32 | fido_a except on tbl instructions.
464 2007-01-04 Paul Brook <paul@codesourcery.com>
466 * arm-dis.c (arm_opcodes): Fix cpsie and cpsid entries.
468 2007-01-04 Andreas Schwab <schwab@suse.de>
470 * m68k-opc.c: Fix encoding of signed bit in the cpu32 tbls insns.
472 2007-01-04 Julian Brown <julian@codesourcery.com>
474 * arm-dis.c (neon_opcode): Fix disassembly for vshl, vqshl, vrshl,
477 For older changes see ChangeLog-2006
483 version-control: never