1 2001-05-12 H.J. Lu <hjl@gnu.org>
3 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
6 2001-05-12 Peter Targett <peter.targett@arccores.com>
8 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
9 register to r/w. Formatting fixes throughout file.
11 2001-05-12 Alan Modra <amodra@one.net.au>
13 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
15 (twobyte_has_modrm): Update table.
16 (need_modrm): Give it file scope.
17 (MODRM_CHECK): Define.
18 (dofloat): Use MODRM_CHECK.
23 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
25 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
26 even at end of a section.
27 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
28 by ignoring precariously-unpacked insn_value in favor of raw buffer.
30 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
32 * disassemble.c (disassembler_usage): Remove unused attribute.
34 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
36 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
38 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
40 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
41 assume incoming buffer already has the base insn loaded. Handle
42 smaller-than-base instructions for variable-length case.
44 2001-05-04 Alan Modra <amodra@one.net.au>
46 * i386-dis.c (Ev, Ed): Remove duplicate define.
49 (OP_XS): New function.
50 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
52 (dis386_twobyte_intel): Likewise.
53 (prefix_user_table): Use MS for maskmovq operand.
55 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
57 * Makefile.am: Add OpenRISC target.
58 * Makefile.in: Regenerated.
60 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
62 * configure.in (bfd_openrisc_arch): Add target.
63 * configure: Regenerated.
65 * openrisc-asm.c: New file.
66 * openrisc-desc.c: Likewise.
67 * openrisc-desc.h: Likewise.
68 * openrisc-dis.c: Likewise.
69 * openrisc-ibld.c: Likewise.
70 * openrisc-opc.c: Likewise.
71 * openrisc-opc.h: Likewise.
73 2001-04-24 Christian Groessler <cpg@aladdin.de>
75 * z8k-dis.c: add names of control registers (ctrl_names);
76 (seg_length): provides instruction length fixup for segmented
77 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
78 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
79 (unparse_intr): handle CLASS_PR, print addresses without '#'
80 * z8k-opc.h: re-created with new z8kgen
81 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
82 entries for ldctl/ldctlb instruction
84 2001-04-06 Andreas Jaeger <aj@suse.de>
86 * i386-dis.c: Add ffreep instruction.
88 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
90 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
92 2001-03-24 Alan Modra <alan@linuxcare.com.au>
94 * i386-dis.c (PREGRP25): Define.
95 (dis386_twobyte_att): Use here in place of "movntq" entry.
96 (dis386_twobyte_intel): Likewise.
97 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
99 (dis386_twobyte_att): Use here.
100 (dis386_twobyte_intel): Likewise.
101 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
102 (prefix_user_table <maskmovdqu>): XM operand, not MX.
103 (prefix_user_table): Cosmetic changes to "bad" entries.
105 2001-03-23 Nick Clifton <nickc@redhat.com>
107 * mips-opc.c: Remove extraneous whitespace.
108 * mips-dis.c: Remove extraneous whitespace.
110 2001-03-22 Ben Elliston <bje@redhat.com>
112 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
113 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
114 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
115 to allay a compiler warning.
117 2001-03-22 Alan Modra <alan@linuxcare.com.au>
119 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
120 (dis386_twobyte_intel): Likewise.
121 (twobyte_has_modrm): Set entry for paddq, psubq.
123 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
125 * cgen-dis.in (print_insn_@arch@): Add support for target machine
126 determination via CGEN_COMPUTE_MACH.
127 * fr30-desc.c: Regenerate.
128 * fr30-dis.c: Regenerate.
129 * fr30-opc.h: Regenerate.
130 * m32r-desc.c: Regenerate.
131 * m32r-dis.c: Regenerate.
132 * m32r-opc.h: Regenerate.
133 * m32r-opinst.c: Regenerate.
135 2001-03-20 H.J. Lu <hjl@gnu.org>
137 * configure.in: Remove the redundent AC_ARG_PROGRAM.
138 * configure: Rebuild.
140 2001-03-19 Jim Wilson <wilson@redhat.com>
142 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
143 notestr if larger than xsect.
144 (in_class): Handle format M5.
145 * ia64-asmtab.c: Regnerate.
147 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
149 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
150 has more than one byte left to read.
152 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
154 * s390-opc.c: Add new opcodes. Smooth out formatting.
155 * s390-opc.txt: Add new opcodes.
157 2001-03-06 Nick Clifton <nickc@redhat.com>
159 * arm-dis.c (print_insn_thumb): Compute destination address
160 of BLX(1) instruction by taking bit 1 from PC and not from bit
163 2001-03-06 Igor Shevlyakov <igor@windriver.com>
165 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
166 so command line switches will work.
168 2001-03-05 Dave Brolley <brolley@redhat.com>
170 * fr30-asm.c: Regenerate.
171 * fr30-desc.c: Regenerate.
172 * fr30-desc.h: Regenerate.
173 * fr30-dis.c: Regenerate.
174 * fr30-ibld.c: Regenerate.
175 * fr30-opc.c: Regenerate.
176 * fr30-opc.h: Regenerate.
177 * m32r-asm.c: Regenerate.
178 * m32r-desc.c: Regenerate.
179 * m32r-desc.h: Regenerate.
180 * m32r-dis.c: Regenerate.
181 * m32r-ibld.c: Regenerate.
182 * m32r-opc.c: Regenerate.
183 * m32r-opc.h: Regenerate.
184 * m32r-opinst.c: Regenerate.
186 2001-02-28 Igor Shevlyakov <igor@windriver.com>
188 * m68k-opc.c: fix cpushl according to Motorola. Enable
189 bunch of instructions for Coldfire 5407 and add all new.
191 2001-02-27 Alan Modra <alan@linuxcare.com.au>
193 * configure.in (BFD_VERSION): Do without grep.
194 * configure: Regenerate.
195 * Makefile.am: Run "make dep-am".
196 * Makefile.in: Regenerate.
198 2001-02-23 David Mosberger <davidm@hpl.hp.com>
200 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
201 * ia64-asmtab.c: Regenerate.
203 2001-02-21 David Mosberger <davidm@hpl.hp.com>
205 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
206 separate variants: one for IMM22 and the other for IMM14.
207 * ia64-asmtab.c: Regenerate.
209 2001-02-21 Greg McGary <greg@mcgary.org>
211 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
213 2001-02-20 H.J. Lu <hjl@gnu.org>
215 * Makefile.am (ia64-ic.tbl): Remove the target.
216 (ia64-raw.tbl): Likewise.
217 (ia64-waw.tbl): Likewise.
218 (ia64-war.tbl): Likewise.
219 (ia64-asmtab.c): Generate it in the source directory.
220 * Makefile.in: Regenerated.
222 2001-02-18 lars brinkhoff <lars@nocrew.org>
224 * Makefile.am: Add PDP-11 target.
225 * configure.in: Likewise.
226 * disassemble.c: Likewise.
227 * pdp11-dis.c: New file.
228 * pdp11-opc.c: New file.
230 2001-02-14 Jim Wilson <wilson@redhat.com>
232 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
233 * ia64-asmtab.c: Regenerate.
235 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
237 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
241 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
243 * mips-dis.c (print_insn_arg): Use top four bits of the address of
244 the following instruction not of the jump itself for the jump
246 (print_mips16_insn_arg): Likewise.
248 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
250 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
252 * Makefile.in: Regenerate.
254 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
256 * Makefile.am: Add linux target for S/390.
257 * Makefile.in: Likewise.
258 * configure.in: Likewise.
259 * disassemble.c: Likewise.
260 * s390-dis.c: New file.
261 * s390-mkopc.c: New file.
262 * s390-opc.c: New file.
263 * s390-opc.txt: New file.
265 2001-02-05 Jim Wilson <wilson@redhat.com>
267 * ia64-asmtab.c: Revert 2000-12-16 change.
269 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
271 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
272 * m32r-desc.h: Regenerate.
274 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
276 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
277 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
279 2001-01-14 Alan Modra <alan@linuxcare.com.au>
281 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
283 2001-01-13 Nick Clifton <nickc@redhat.com>
285 * disassemble.c: Remove spurious white space.
287 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
289 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
292 2001-01-11 Peter Targett <peter.targett@arccores.com>
294 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
295 * Makefile.am (C_FILES): Add arc-ext.c.
296 (ALL_MACHINES) Add arc-ext.lo.
297 (INCLUDES) Add opcode directory to list.
298 New dependency entry for arc-ext.lo.
299 * disassemble.c (disassembler): Correct call to
300 arc_get_disassembler.
301 * arc-opc.c: New update for ARC, including full base
302 instructions for ARC variants.
303 * arc-dis.h, arc-dis.c: New update for ARC, including
304 extensibility functionality.
305 * arc-ext.h, arc-ext.c: New files for handling extensibility.
307 2001-01-10 Jan Hubicka <jh@suse.cz>
309 * i386-dis.c (PREGRP15 - PREGRP24): New.
310 (dis386_twobyt): Add SSE2 instructions.
311 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
312 (twobyte_uses_f3_prefix): ... this one.
313 (grps): Add SSE instructions.
314 (prefix_user_table): Add two new slots; add SSE2 instructions.
315 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
316 Handle the REPNZ and Data16 prefixes as well; do proper lookup
317 to prefix_user_table.
318 (OP_E): Accept mfence and lfence as well.
319 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
320 (OP_XMM): Support REX extensions.
324 2001-01-09 Nick Clifton <nickc@redhat.com>
326 * arm-dis.c (print_insn): Set pc to zero for instructions with
327 a reloc associated with them.
329 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
331 * cgen-asm.in (parse_insn_normal): Changed syn to be
332 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
333 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
334 to '\0' to use 0 instead.
335 * cgen-dis.in (print_insn_normal): Ditto.
336 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
338 2001-01-05 Jan Hubicka <jh@suse.cz>
340 * i386-dis.c: Add x86_64 support.
341 (rex): New static variable.
342 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
343 (USED_REX): New macro.
344 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
345 (OP_I64, OP_OFF64, OP_IMREG): New functions.
346 (OP_REG, OP_OFF): Declare.
347 (get64, get32, get32s): New functions.
348 (r??_reg): New constants.
349 (dis386_att): Change templates of instruction implicitly promoted
350 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
352 (dis386_intel): Likewise.
353 (dixx86_64_att): New table based on dis386_att.
354 (dixx86_64_intel): New table based on dis386_intel.
355 (names64, names8rex): New global variable.
356 (names32, names16): Add extended registers.
357 (prefix_user_t): Recognize rex prefixes.
358 (prefix_name): Print REX prefixes nicely.
359 (op_riprel): New global variable.
360 (start_pc): Set type to bfd_vma.
361 (print_insn_i386): Detect the 64bit mode and use proper table;
362 move ckprefix after initializing the buffer; output unused rex prefixes;
363 output information about target of RIP relative addresses.
364 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
365 (print_operand_value): New function.
366 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
367 REX prefix and new modes.
368 (get64, get32s): New.
369 (get32): Return bfd_signed_vma type.
370 (set_op): Initialize the op_riprel.
371 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
373 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
375 cgen-dis.in (read_insn): Use bfd_get_bits()
377 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
379 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
380 (hash_insn_list): Likewise
381 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
382 (extract_1): Use bfd_get_bits().
383 (extract_normal): Apply sign extension to both extraction
385 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
386 (cgen_put_insn_value): Use bfd_put_bits()
388 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
390 * cgen-asm.in (parse_insn_normal): Print better error message for
391 instructions with missing operands.
393 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
395 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
397 2000-12-16 Nick Clifton <nickc@redhat.com>
399 * Makefile.in: Regenerate.
400 * aclocal.m4: Regenerate.
401 * config.in: Regenerate.
402 * configure.in: Add spacing.
403 * configure: Regenerate.
404 * ia64-asmtab.c: Regenerate.
405 * po/opcodes.pot: Regenerate.
407 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
409 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
410 error messages over later parse-time ones.
412 2000-12-12 Jim Wilson <wilson@redhat.com>
414 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
416 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
417 (print_dependency_table): Print NULL if semantics field not set.
418 (insert_opcode_dependencies): Mark cmp parameter as unused.
419 (print_main_table): Use fprintf_vma to print long long fields.
420 (main): Mark argv paramter as unused. Convert to old style definition.
421 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
422 * ia64-asmtab.c: Regnerate.
424 2000-12-09 Nick Clifton <nickc@redhat.com>
426 * m32r-dis.c (print_insn): Prevent re-read of instruction from
429 * fr30-dis.c: Regenerate.
431 2000-12-08 Peter Targett <peter.targett@arccores.com>
433 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
434 * Makefile.am (C_FILES): Add arc-ext.c.
435 (ALL_MACHINES) Add arc-ext.lo.
436 (INCLUDES) Add opcode directory to list.
437 New dependency entry for arc-ext.lo.
438 * disassemble.c (disassembler): Correct call to
439 arc_get_disassembler.
440 * arc-opc.c: New update for ARC, including full base
441 instructions for ARC variants.
442 * arc-dis.h, arc-dis.c: New update for ARC, including
443 extensibility functionality.
444 * arc-ext.h, arc-ext.c: New files for handling extensibility.
446 2000-12-03 Chris Demetriou cgd@sibyte.com
448 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
449 MOD_HILO, and MOD_LO macros.
451 * mips-opc.c (M1, M2): Delete.
452 (mips_builtin_opcodes): Remove all uses of M1.
454 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
455 instructions take "G" format second operands and use the
457 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
459 Delete "sel" code operands from mfc1 and mtc1.
460 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
463 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
464 Chris Demetriou cgd@sibyte.com
466 * mips-opc.c (mips_builtin_opcodes): Finish additions
467 for MIPS32 support, and clean up existing entries for
468 aesthetics, consistency with the MIPS32 ISA, and
469 with consistency the rest of the table.
471 2000-12-01 Nick Clifton <nickc@redhat.com>
473 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
476 2000-12-01 Chris Demetriou <cgd@sibyte.com>
478 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
479 specifiers. Update 'B' for new constant names, and remove
481 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
482 near the top of the array, so they are disassembled properly.
483 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
484 code for MIPS32. Update "clo" and "clz" to use 'U' operand
485 specifier. Add 'H' format specifier variants for "mfc1,"
486 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
487 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
488 "wait" variant which uses 'J' operand specifier.
490 * mips-dis.c (set_mips_isa_type): Update to use
491 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
492 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
493 * mips-opc.c (I32): New constant for instructions added in
496 (mips_builtin_opcodes) Replace all uses of P4 with I32.
498 * mips-dis.c (set_mips_isa_type): Add cases for
499 bfd_mach_mips5 and bfd_mach_mips64.
500 * mips-opc.c (I64): New definitions.
502 * mips-dis.c (set_mips_isa_type): Add case for
505 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
507 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
508 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
509 Initialize variable dc to NULL.
510 (print_insn_shx): Remove unused label d_reg_n.
512 2000-11-24 Nick Clifton <nickc@redhat.com>
514 * arm-opc.h: Add new opcode formatting parameter 'B'.
515 (arm_opcodes): Add XScale, v5, and v5te instructions.
516 (thumb_opcodes): Add v5t instructions.
518 * arm-dis.c (print_insn_arm): Handle new 'B' format
520 (print_insn_thumb): Decode BLX(1) instruction.
522 2000-11-21 Chris Demetriou <cgd@sibyte.com>
524 * mips-opc.c: Fix file header comment.
526 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
528 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
529 print_insn_cris_with_register_prefix.
531 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
533 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
535 2000-11-07 Matthew Green <mrg@redhat.com>
537 * cgen-dis.in (print_insn): All insns which can fit into insn_value
538 must be loaded there in their entirety.
540 2000-10-20 Jakub Jelinek <jakub@redhat.com>
542 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
543 (compute_arch_mask): Add v8plusb and v9b machines.
544 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
545 * sparc-opc.c: Support for Cheetah instruction set.
546 (prefetch_table): Add #invalidate.
548 2000-10-16 Nick Clifton <nickc@redhat.com>
550 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
552 2000-10-06 Dave Brolley <brolley@redhat.com>
554 * fr30-desc.h: Regenerate.
555 * m32r-desc.h: Regenerate.
556 * m32r-ibld.c: Regenerate.
558 2000-10-05 Jim Wilson <wilson@redhat.com>
560 * ia64-ic.tbl: Update from Intel.
561 * ia64-asmtab.c: Regenerate.
563 2000-10-04 Kazu Hirata <kazu@hxi.com>
565 * ia64-gen.c: Convert C++-style comments to C-style comments.
566 * tic54x-dis.c: Likewise.
568 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
570 Changes to add dollar prefix to registers for files where user symbols
571 don't have a leading underscore. Fix formatting.
572 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
573 (format_reg): Add parameter with_reg_prefix. All callers changed.
574 (print_with_operands): Ditto.
575 (print_insn_cris_generic): Renamed from print_insn_cris, add
576 parameter with_reg_prefix.
577 (print_insn_cris_with_register_prefix,
578 print_insn_cris_without_register_prefix, cris_get_disassembler):
580 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
582 2000-09-22 Jim Wilson <wilson@redhat.com>
584 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
585 gt, ge, ngt, and nge.
586 * ia64-asmtab.c: Regenerate.
588 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
589 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
590 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
591 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
592 * ia64-asmtab.c: Regnerate.
594 2000-09-13 Anders Norlander <anorland@acc.umu.se>
596 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
597 Add mfc0 and mtc0 with sub-selection values.
598 Add clo and clz opcodes.
599 Add msub and msubu instructions for MIPS32.
600 Add madd/maddu aliases for mad/madu for MIPS32.
601 Support wait, deret, eret, movn, pref for MIPS32.
602 Support tlbp, tlbr, tlbwi, tlbwr.
605 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
606 (print_insn_arg): Handle 'H' args.
607 (set_mips_isa_type): Recognize 4K.
608 Use CPU_* defines instead of hardcoded numbers.
610 2000-09-11 Catherine Moore <clm@redhat.com>
612 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
613 (d30v_format_tab): Use Rb2 for modinc and moddec.
615 2000-09-07 Catherine Moore <clm@redhat.com>
617 * d30v-opc.c (d30v_format_tab): Use format Ra for
620 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
622 * configure: Rebuilt with new libtool.m4.
624 2000-09-05 Nick Clifton <nickc@redhat.com>
626 * configure: Regenerate.
627 * po/opcodes.pot: Regenerate.
629 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
631 * acinclude.m4: Include libtool and gettext macros from the
633 * aclocal.m4, configure: Rebuilt.
635 2000-08-30 Kazu Hirata <kazu@hxi.com>
637 * tic80-dis.c: Fix formatting.
639 2000-08-29 Kazu Hirata <kazu@hxi.com>
641 * w65-dis.c: Fix formatting.
643 2000-08-28 Mark Hatle <mhatle@mvista.com>
645 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
646 (powerpc_opcodes): Add table entries for PPC 405 instructions.
647 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
648 instructions. Added extended mnemonic mftbl as defined in the
649 405GP manual for all PPCs.
651 2000-08-28 Jim Wilson <wilson@redhat.com>
653 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
654 call. Change last goto to use failed instead of done.
656 2000-08-28 Dave Brolley <brolley@redhat.com>
658 * cgen-ibld.in (cgen_put_insn_int_value): New function.
659 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
660 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
661 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
662 * cgen-dis.in (read_insn): New static function.
663 (print_insn): Use read_insn to read the insn into the buffer and set
665 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
667 * fr30-asm.c: Regenerated.
668 * fr30-desc.c: Regenerated.
669 * fr30-desc.h: Regenerated.
670 * fr30-dis.c: Regenerated.
671 * fr30-ibld.c: Regenerated.
672 * fr30-opc.c: Regenerated.
673 * fr30-opc.h: Regenerated.
674 * m32r-asm.c: Regenerated.
675 * m32r-desc.c: Regenerated.
676 * m32r-desc.h: Regenerated.
677 * m32r-dis.c: Regenerated.
678 * m32r-ibld.c: Regenerated.
679 * m32r-opc.c: Regenerated.
681 2000-08-28 Kazu Hirata <kazu@hxi.com>
683 * tic30-dis.c: Fix formatting.
685 2000-08-27 Kazu Hirata <kazu@hxi.com>
687 * sh-dis.c: Fix formatting.
689 2000-08-24 David Edelsohn <dje@watson.ibm.com>
691 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
693 2000-08-24 Kazu Hirata <kazu@hxi.com>
695 * z8k-dis.c: Fix formatting.
697 2000-08-16 Jim Wilson <wilson@redhat.com>
699 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
700 break, mov-immediate, nop.
701 * ia64-opc-f.c: Delete fpsub instructions.
702 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
703 address operand. Rewrite using macros to avoid long lines.
704 * ia64-opc.h (POSTINC): Define.
705 * ia64-asmtab.c: Regenerate.
707 2000-08-15 Jim Wilson <wilson@redhat.com>
709 * ia64-ic.tbl: Add missing entries.
711 2000-08-08 Jason Eckhardt <jle@redhat.com>
713 * i860-dis.c (print_br_address): Change third argument from int
716 2000-08-07 Richard Henderson <rth@redhat.com>
718 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
719 for MLI templates. Handle IA64_OPND_TGT64.
721 2000-08-04 Ben Elliston <bje@redhat.com>
723 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
726 2000-08-02 Jim Wilson <wilson@redhat.com>
728 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
730 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
732 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
733 Change return type from void to int. Check the combination
734 of operands, return 1 if valid. Fix to avoid BUF overflow.
735 Report undefined combinations of operands in COMMENT.
736 Report internal errors to stderr. Output the adiw/sbiw
737 constant operand in both decimal and hex.
738 (print_insn_avr): Disassemble ldd/std with displacement of 0
739 as ld/st. Check avr_operand () return value, handle invalid
740 combinations of operands like unknown opcodes.
742 2000-07-28 Ben Elliston <bje@redhat.com>
744 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
745 (run-cgen, stamp-m32r, stamp-fr30): New targets.
746 * Makefile.in: Regenerate.
747 * configure.in: Add --enable-cgen-maint option.
748 * configure: Regenerate.
750 2000-07-26 Dave Brolley <brolley@redhat.com>
752 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
753 (cgen_hw_lookup_by_num): Ditto.
754 (cgen_operand_lookup_by_name): Ditto.
755 (print_address): Ditto.
756 (print_keyword): Ditto.
757 * cgen-dis.c (hash_insn_array): Mark unused parameters with
759 * cgen-asm.c (hash_insn_array): Mark unused parameters with
761 (cgen_parse_keyword): Ditto.
763 2000-07-22 Jason Eckhardt <jle@redhat.com>
765 * i860-dis.c: New file.
766 (print_insn_i860): New function.
767 (print_br_address): New function.
768 (sign_extend): New function.
769 (BITWISE_OP): New macro.
770 (I860_REG_PREFIX): New macro.
771 (grnames, frnames, crnames): New structures.
773 * disassemble.c (ARCH_i860): Define.
774 (disassembler): Add check for bfd_arch_i860 to set disassemble
775 function to print_insn_i860.
777 * Makefile.in (CFILES): Added i860-dis.c.
778 (ALL_MACHINES): Added i860-dis.lo.
779 (i860-dis.lo): New dependences.
781 * configure.in: New bits for bfd_i860_arch.
783 * configure: Regenerated.
785 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
787 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
788 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
789 (cris-dis.lo, cris-opc.lo): New rules.
790 * Makefile.in: Rebuild.
791 * configure.in (bfd_cris_arch): New target.
792 * configure: Rebuild.
793 * disassemble.c (ARCH_cris): Define.
794 (disassembler): Support ARCH_cris.
795 * cris-dis.c, cris-opc.c: New files.
796 * po/POTFILES.in, po/opcodes.pot: Regenerate.
798 2000-07-11 Jakub Jelinek <jakub@redhat.com>
800 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
801 Reported by Bill Clarke <llib@computer.org>.
803 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
805 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
806 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
808 2000-07-09 Alan Modra <alan@linuxcare.com.au>
810 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
811 fput_const, extract_3, extract_5_load, extract_5_store,
812 extract_5r_store, extract_5R_store, extract_10U_store,
813 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
814 extract_12, extract_17, extract_22): Prototype.
815 (print_insn_hppa): Rename inner block opcode -> opc to avoid
816 shadowing outer block.
819 2000-07-05 DJ Delorie <dj@redhat.com>
823 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
825 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
827 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
829 * avr-dis.c (avr_operand): Change _ () to _() around all strings
830 marked for translation (exception from the usual coding style).
831 (print_insn_avr): Initialize insn2 to avoid warnings.
833 2000-07-03 Kazu Hirata <kazu@hxi.com>
835 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
836 * h8500-dis.c: Fix formatting.
838 2000-07-01 Alan Modra <alan@linuxcare.com.au>
840 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
841 (CLEANFILES): Add DEPA.
842 * Makefile.in: Regenerate.
844 2000-06-26 Scott Bambrough <scottb@netwinder.org>
846 * arm-dis.c (regnames): Add an additional register set to match
847 the set used by GCC. Make it the default.
849 2000-06-22 Alan Modra <alan@linuxcare.com.au>
851 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
853 * Makefile.in: Regenerate.
855 2000-06-20 H.J. Lu <hjl@gnu.org>
857 * Makefile.am: Rebuild dependency.
858 * Makefile.in: Rebuild.
860 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
862 * Makefile.in, configure: regenerate
863 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
865 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
867 * configure.in: Recognize m68hc12 and m68hc11.
868 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
869 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
870 and opcode generation for m68hc11 and m68hc12.
872 2000-06-16 Nick Duffek <nsd@redhat.com>
874 * disassemble.c (disassembler): Refer to the PowerPC 620 using
875 bfd_mach_ppc_620 instead of 620.
877 2000-06-12 Kazu Hirata <kazu@hxi.com>
879 * h8300-dis.c: Fix formatting.
880 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
883 2000-06-09 Denis Chertykov <denisc@overta.ru>
885 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
887 2000-06-07 Denis Chertykov <denisc@overta.ru>
889 * avr-dis.c: completely rewritten.
891 2000-06-02 Kazu Hirata <kazu@hxi.com>
893 * h8300-dis.c: Follow the GNU coding style.
894 (bfd_h8_disassemble) Fix a typo.
896 2000-06-01 Kazu Hirata <kazu@hxi.com>
898 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
899 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
900 correctly. Fix a typo.
902 2000-05-31 Nick Clifton <nickc@redhat.com>
904 * opintl.h (_(String)): Explain why dgettext is used instead of
907 2000-05-30 Nick Clifton <nickc@redhat.com>
909 * opintl.h (gettext, dgettext, dcgettext, textdomain,
910 bindtextdomain): Replace defines with those from intl/libgettext.h
911 to quieten gcc warnings.
913 2000-05-26 Alan Modra <alan@linuxcare.com.au>
915 * Makefile.am: Update dependencies with "make dep-am"
916 * Makefile.in: Regenerate.
918 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
920 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
921 sign-extending operands.
923 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
925 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
928 2000-05-21 Nick Clifton <nickc@redhat.com>
930 * Makefile.am (LIBIBERTY): Define.
932 2000-05-19 Diego Novillo <dnovillo@redhat.com>
934 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
935 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
936 (reg_names): Rename to std_reg_names. Change it to a char **
938 (std_reg_names): New name for reg_names.
939 (set_mips_isa_type): Set reg_names to point to std_reg_names by
942 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
944 * fr30-desc.h: Partially regenerated to account for changed
945 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
946 * m32r-desc.h: Ditto.
948 2000-05-15 Nick Clifton <nickc@redhat.com>
950 * arm-opc.h: Use upper case for flasg in MSR and MRS
951 instructions. Allow any bit to be set in the field_mask of
954 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
955 field_mask of an MSR instruction.
957 2000-05-11 Thomas de Lellis <tdel@windriver.com>
959 * arm-opc.h: Disassembly of thumb ldsb/ldsh
960 instructions changed to ldrsb/ldrsh.
962 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
964 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
965 target addresses for 'jal' and 'j'.
967 2000-05-10 Geoff Keating <geoffk@redhat.com>
969 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
970 also available in common mode when powerpc syntax is being used.
972 2000-05-08 Alan Modra <alan@linuxcare.com.au>
974 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
975 (dummy_print_address): Ditto.
977 2000-05-04 Timothy Wall <twall@redhat.com>
981 * disassemble.c (disassembler): Add ARCH_tic54x.
982 * configure.in: Added tic54x target.
984 * Makefile.am: Add tic54x dependencies.
985 * Makefile.in: Ditto.
987 2000-05-03 J.T. Conklin <jtc@redback.com>
989 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
990 vector unit operands.
991 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
992 unit instruction formats.
993 (PPCVEC): New macro, mask for vector instructions.
994 (powerpc_operands): Add table entries for above operand types.
995 (powerpc_opcodes): Add table entries for vector instructions.
997 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
998 (print_insn_little_powerpc): Likewise.
999 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1001 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1003 * configure.in: Add bfd_powerpc_64_arch.
1004 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1007 2000-04-24 Nick Clifton <nickc@redhat.com>
1009 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1012 2000-04-23 Denis Chertykov <denisc@overta.ru>
1014 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1016 (reg_fmul_r): New. Extract source register from FMUL instruction.
1017 (reg_muls_d): New. Extract destination register from MULS instruction.
1018 (reg_muls_r): New. Extract source register from MULS instruction.
1019 (reg_movw_d): New. Extract destination register from MOVW instruction.
1020 (reg_movw_r): New. Extract source register from MOVW instruction.
1021 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1022 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1024 2000-04-22 Timothy Wall <twall@redhat.com>
1026 * ia64-gen.c (general): Add an ordered table of primary
1027 opcode names, as well as priority fields to disassembly data
1028 structures to enforce a preferred disassembly format based on the
1029 ordering of the opcode tables.
1030 (load_insn_classes): Show a useful message if IC tables are missing.
1031 (load_depfile): Ditto.
1032 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1033 distinguish preferred disassembly.
1034 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1035 format. Fix incorrect flag on fma.s/fma.s.s0.
1036 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1037 the highest priority.
1038 * ia64-opc-b.c: Use more abbreviations.
1039 * ia64-asmtab.c: Regenerate.
1041 2000-04-21 Jason Eckhardt <jle@redhat.com>
1043 * hppa-dis.c (extract_16): New function.
1044 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1045 new operand types l,y,&,fe,fE,fx.
1047 2000-04-21 Richard Henderson <rth@redhat.com>
1048 David Mosberger <davidm@hpl.hp.com>
1049 Timothy Wall <twall@redhat.com>
1050 Bob Manson <manson@charmed.cygnus.com>
1051 Jim Wilson <wilson@redhat.com>
1053 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1054 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1055 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1057 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1058 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1059 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1060 * Makefile.in: Rebuild.
1061 * configure Rebuild.
1062 * configure.in (bfd_ia64_arch): New target.
1063 * disassemble.c (ARCH_ia64): Define.
1064 (disassembler): Support ARCH_ia64.
1065 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1066 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1067 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1068 ia64-war.tbl, ia64-waw.tbl: New files.
1070 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1072 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1073 (disassemble): Use them.
1075 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1077 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1078 * Makefile.am: Update dependencies.
1079 * Makefile.in: Regenerate.
1081 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1083 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1084 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1085 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1086 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1087 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1088 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1089 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1090 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1091 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1092 ansidecl.h as sysdep.h includes it.
1094 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1096 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1097 --enable-build-warnings option.
1098 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1099 * Makefile.in, configure: Re-generate.
1101 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1103 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1104 stc GBR,@-<REG_N> is available for arch_sh1_up.
1105 Group parallel processing insn with identical mnemonics together.
1106 Make three-operand psha / pshl come first.
1108 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1110 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1111 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1112 (sh_arg_type): Add A_PC.
1113 (sh_table): Update entries using immediates. Add repeat.
1114 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1115 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1117 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1119 * po/opcodes.pot: Regenerate.
1121 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1122 (DEP): Quote when passing vars to sub-make. Add warning message
1124 (DEP1): Rewrite for "gcc -MM".
1125 (CLEANFILES): Add DEP2.
1126 Update dependencies.
1127 * Makefile.in: Regenerate.
1129 2000-04-03 Denis Chertykov <denisc@overta.ru>
1131 * avr-dis.c: Syntax cleanup.
1132 (add0fff): Print the pc relative address as a signed number.
1133 (add03f8): Likewise.
1135 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1137 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1138 the parameter ATTRIBUTE_UNUSED.
1139 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1141 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1143 * m10300-opc.c: SP-based offsets are always unsigned.
1145 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1147 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1148 [branch always] instead of "undefined".
1150 2000-03-27 Nick Clifton <nickc@redhat.com>
1152 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1153 short instructions, from end of list of long instructions.
1155 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1157 * Makefile.am (CFILES): Add avr-dis.c.
1158 (ALL_MACHINES): Add avr-dis.lo.
1160 2000-03-27 Alan Modra <alan@linuxcare.com>
1162 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1164 (print_insn_avr): Call function via pointer in K&R compatible way.
1165 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1166 add0fff, add03f8): Convert to old style function declaration and
1168 (avrdis_opcode): Add prototype.
1170 2000-03-27 Denis Chertykov <denisc@overta.ru>
1172 * avr-dis.c: New file. AVR disassembler.
1173 * configure.in (bfd_avr_arch): New architecture support.
1174 * disassemble.c: Likewise.
1175 * configure: Regenerate.
1177 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1179 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1181 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1183 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1184 flag to determine if operand is pc-relative.
1186 (d30v_format_table):
1187 (REL6S3): Renamed from IMM6S3.
1188 Added flag OPERAND_PCREL.
1189 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1190 added flag OPERAND_PCREL.
1191 (IMM12S3U): Replaced with REL12S3.
1192 (SHORT_D2, LONG_D): Delay target is pc-relative.
1193 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1194 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1195 using the REL* operands.
1196 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1197 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1198 LONG_Db, using REL* operands.
1199 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1200 (d30v_opcode_table): Use new *r formats.
1202 2000-02-28 Nick Clifton <nickc@redhat.com>
1204 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1205 'signed_overflow_ok_p'.
1207 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1209 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1210 name of the libtool directory.
1211 * Makefile.in: Rebuild.
1213 2000-02-24 Nick Clifton <nickc@redhat.com>
1215 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1216 (cgen_clear_signed_overflow_ok): New function.
1217 (cgen_signed_overflow_ok_p): New function.
1219 2000-02-23 Andrew Haley <aph@redhat.com>
1221 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1222 m32r-ibld.c, m32r-opc.h: Rebuild.
1224 2000-02-23 Linas Vepstas <linas@linas.org>
1226 * i370-dis.c, i370-opc.c: New.
1228 * disassemble.c (ARCH_i370): Define.
1229 (disassembler): Handle it.
1231 * Makefile.am: Add support for Linux/IBM 370.
1232 * configure.in: Likewise.
1234 * Makefile.in: Regenerate.
1235 * configure: Likewise.
1237 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1239 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1240 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1243 2000-02-22 Andrew Haley <aph@redhat.com>
1245 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1247 * mips-opc.c (G6): New define.
1248 (mips_builtin_op): Add "move" definition for -gp32.
1250 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1252 From Grant Erickson <gerickso@Brocade.COM>:
1253 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1255 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1257 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1260 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1262 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1263 (print_insn_ppi): Likewise.
1264 (print_insn_shx): Use info->mach to select appropriate insn set.
1265 Add support for sh-dsp. Remove FD_REG_N support.
1266 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1267 (sh_arg_type): Likewise. Remove FD_REG_N.
1268 (sh_dsp_reg_nums): New enum.
1269 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1270 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1271 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1272 (arch_sh3_dsp_up): Likewise.
1273 (sh_opcode_info): New field: arch.
1274 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1275 D_REG_N. Fill in arch field. Add sh-dsp insns.
1277 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1279 * arm-dis.c: Change flavor name from atpcs-special to
1280 special-atpcs to prevent name conflict in gdb.
1281 (get_arm_regname_num_options, set_arm_regname_option,
1282 get_arm_regnames): New functions. API to access the several
1283 flavor of register names. Note: Used by gdb.
1284 (print_insn_thumb): Use the register name entry from the currently
1285 selected flavor for LR and PC.
1287 2000-02-10 Nick Clifton <nickc@redhat.com>
1289 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1291 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1292 "mulsh.h" instructions.
1293 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1295 (print_insn_mcore): Add support for little endian targets.
1296 Add support for MULSH and OPSR classes.
1298 2000-02-07 Nick Clifton <nickc@redhat.com>
1300 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1301 Previous delat did not take.
1303 2000-02-03 Timothy Wall <twall@redhat.com>
1305 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1306 to adjust target address bounds checking and calculate the
1307 appropriate octet offset into data.
1309 2000-01-27 Nick Clifton <nickc@redhat.com>
1311 * arm-dis.c: (parse_disassembler_option): Rename to
1312 parse_arm_disassembler_option and allow to be exported.
1314 * disassemble.c (disassembler_usage): New function: Print out any
1315 target specific disassembler options.
1316 Call arm_disassembler_options() if the ARM architecture is being
1319 * arm-dis.c (NUM_ELEM): Define this macro if not already
1321 (arm_regname): New struct type for ARM register names.
1322 (arm_toggle_regnames): Delete.
1323 (parse_disassembler_option): Use register name structure.
1324 (print_insn): New function: Combines duplicate code found in
1325 print_insn_big_arm and print_insn_little_arm.
1326 (print_insn_big_arm): Call print_insn.
1327 (print_insn_little_arm): Call print_insn.
1328 (print_arm_disassembler_options): Display list of supported,
1329 ARM specific disassembler options.
1331 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1333 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1334 ARM_STT_16BIT flag as Thumb code symbols.
1336 * arm-dis.c (printf_insn_little_arm): Ditto.
1338 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1340 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1341 of raw thumb instructions.
1343 2000-01-20 Nick Clifton <nickc@redhat.com>
1345 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1347 2000-01-03 Nick Clifton <nickc@cygnus.com>
1349 * arm-dis.c (streq): New macro.
1350 (strneq): New macro.
1351 (force_thumb): ew local variable.
1352 (parse_disassembler_option): New function: Parse a single, ARM
1353 specific disassembler command line switch.
1354 (parse_disassembler_option): Call parse_disassembler_option to
1355 parse individual command line switches.
1356 (print_insn_big_arm): Check force_thumb.
1357 (print_insn_little_arm): Check force_thumb.
1359 For older changes see ChangeLog-9899
1365 version-control: never