1 1999-05-07 Nick Clifton <nickc@cygnus.com>
3 * mcore-dis.c (print_insn_mcore): Use .short to display
4 unidentified instructions, not .word.
6 1999-04-26 Tom Tromey <tromey@cygnus.com>
8 * aclocal.m4, configure: Updated for new version of libtool.
10 1999-04-14 Doug Evans <devans@casey.cygnus.com>
12 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
13 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
15 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
17 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
20 1999-04-10 Doug Evans <devans@casey.cygnus.com>
22 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
23 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
25 1999-04-06 Ian Lance Taylor <ian@zembu.com>
27 * opintl.h (LC_MESSAGES): Never define.
29 1999-04-04 Ian Lance Taylor <ian@zembu.com>
31 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
32 (separator_char, scale_char): Likewise.
33 (print_insn_x86): Likewise.
34 (print_insn_i386): Likewise. Add declaration.
36 1999-03-26 Doug Evans <devans@casey.cygnus.com>
38 * fr30-dis.c: Rebuild.
39 * m32r-dis.c: Rebuild.
41 1999-03-23 Ian Lance Taylor <ian@zembu.com>
43 * m68k-opc.c: Change compare instructions to use "@s" rather than
44 ";s" when used with an immediate operand.
46 1999-03-22 Doug Evans <devans@casey.cygnus.com>
48 * cgen-opc.c (cgen_set_cpu): Delete.
49 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
50 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
52 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
54 * po/opcodes.pot: Rebuild.
56 1999-03-16 Martin Hunt <hunt@cygnus.com>
58 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
60 1999-03-11 Doug Evans <devans@casey.cygnus.com>
62 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
63 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
64 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
65 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
66 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
67 * m32r-opinst.c: Rebuild.
69 1999-02-25 Doug Evans <devans@casey.cygnus.com>
71 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
72 (cgen_hw_lookup_by_num): Rewrite.
73 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
74 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
75 * m32r-opinst.c: Rebuild.
77 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
79 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
80 (insert_jhint): Fix insertion mask.
81 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
83 1999-02-10 Doug Evans <devans@casey.cygnus.com>
85 * Makefile.in: Rebuild.
87 1999-02-09 Doug Evans <devans@casey.cygnus.com>
89 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
90 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
91 * Makefile.am: Remove references to them.
92 (HFILES): Add fr30-desc.h,m32r-desc.h.
93 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
95 (ALL_MACHINES): Update.
96 * configure.in: Redo handling of cgen_files.
97 (bfd_i960_arch): Delete i960c-*.lo files.
98 * configure: Regenerate.
99 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
100 (hash_insn_array): Rewrite.
101 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
102 (hash_insn_array): Rewrite.
103 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
104 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
105 (cgen_lookup_get_insn_operands): Ditto.
106 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
107 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
108 * po/POTFILES.in: Rebuild.
109 * po/opcodes.pot: Rebuild.
111 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
113 * Makefile.am: Rebuild dependencies.
114 (HFILES): Add fr30-opc.h.
115 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
116 * Makefile.in: Rebuild.
118 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
119 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
121 * acconfig.h: Remove.
122 * configure: Rebuild with current autoconf/automake.
123 * aclocal.m4: Likewise.
124 * config.in: Likewise.
125 * Makefile.in: Likewise.
127 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
129 * m68k-opc.c: Correct move (not movew) to status word on 5200.
131 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
133 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
134 * i386-dis.c (x_mode): Define.
138 (dis386_twobyte): Remove.
139 (dis386_twobyte_att): New.
140 (dis386_twobyte_intel): New.
141 (print_insn_x86): Use new arrays.
143 (float_mem_intel): New.
144 (float_mem_att): New.
145 (dofloat): Use new float_mem arrays.
146 (print_insn_i386_att): New.
147 (print_insn_i386_intel): New.
148 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
149 (putop): Handle intel syntax.
150 (OP_indirE): Handle intel syntax.
151 (OP_E): Handle intel syntax.
152 (OP_I): Handle intel syntax.
153 (OP_sI): Handle intel syntax.
154 (OP_OFF): Handle intel syntax.
158 1999-01-27 Doug Evans <devans@casey.cygnus.com>
160 * fr30-opc.h,fr30-opc.c: Rebuild.
161 * i960c-opc.h,i960c-opc.c: Rebuild.
162 * m32r-opc.c: Rebuild.
164 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
166 * hppa-dis.c: revert HP merge changes until HP gives us
169 1999-01-19 Nick Clifton <nickc@cygnus.com>
171 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
172 offsets as well as symbloic address.
174 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
176 * hppa-dis.c: fix comments and some indentation.
178 1999-01-12 Doug Evans <devans@casey.cygnus.com>
180 * fr30-opc.c,i960c-opc.c: Regenerate.
182 1999-01-11 Doug Evans <devans@casey.cygnus.com>
184 * fr30-opc.c: Regenerate.
186 1999-01-06 Doug Evans <devans@casey.cygnus.com>
188 * m32r-dis.c: Regenerate.
190 1999-01-05 Doug Evans <devans@casey.cygnus.com>
192 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
193 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
194 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
196 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
198 * configure.in: Require autoconf 2.12.1 or higher.
200 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
202 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
204 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
206 * fr30-opc.c: Regenerated.
208 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
210 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
212 1998-12-15 Dave Brolley <brolley@cygnus.com>
214 * fr30-opc.c,fr30-opc.h: Regenerated.
216 1998-12-14 Dave Brolley <brolley@cygnus.com>
218 * fr30-opc.c,fr30-opc.h: Regenerated.
220 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
222 * fr30-opc.c,fr30-opc.h: Regenerated.
224 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
226 * m32r-opc.c: Regenerate.
228 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
230 * dis-buf.c (generic_strcat_address): reformat to GNU coding
231 conventions. change sprintf call to an sprintf_vma call.
233 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
235 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
237 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
239 The following changes were made by
240 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
241 David Taylor <taylor@texas.cygnus.com>, and
242 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
243 merge in changes by HP; HP did not create ChangeLog entries.
245 * dis-buf.c (generic_strcat_address): new function.
247 * hppa-dis.c: Changes to improve hppa disassembly.
248 Changed formatting in : reg_names, fp_reg_names,control_reg,
249 New variables : sign_extension_names, deposit_names, conversion_names
250 float_test_names, compare_cond_names_double, add_cond_names_double,
251 logical_cond_names_double, unit_cond_names_double,
252 branch_push_pop_names, saturation_names, shift_names, mix_names,
253 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
254 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
255 (fput_const): renamed as fput_hex_const
257 - use the macros fputs_filtered and
258 fput_decimal_const whenever possible; calls to sign_extend require
259 2 params -- add a missing second param of 0.
260 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
261 architecture version number of current machine. HP folks are
262 trying to handle situation where the target program was compiled
263 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
265 - added new cases : 'g', 'B', 'm'
266 - added cases specifically for PA 2.0
267 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
268 - calls to fput_const become calls to fput_hex_const
270 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
272 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
273 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
274 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
275 * Makefile.in: Rebuilt.
276 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
278 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
279 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
281 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
283 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
285 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
287 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
289 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
290 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
292 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
294 * fr30-opc.c: Regenerate.
296 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
298 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
300 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
302 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
304 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
306 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
308 1998-11-30 Doug Evans <devans@casey.cygnus.com>
310 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
311 CGEN_INSN_BASE_VALUE.
312 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
313 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
315 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
317 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
319 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
321 * fr30-asm.c,fr30-dis.c: Regenerated.
323 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
325 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
327 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
329 * fr30-opc.c: Regenerated.
331 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
333 * fr30-opc.c: Regenerated.
334 * fr30-opc.h: Regenerated.
335 * fr30-dis.c: Regenerated.
336 * fr30-asm.c: Regenerated.
338 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
340 * mips-opc.c (sync.p,sync.l): Swap insn values.
342 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
344 * fr30-opc.c: Regenerate.
346 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
348 * fr30-opc.c: Regenerated.
349 * fr30-opc.h: Regenerated.
351 1998-11-18 Doug Evans <devans@casey.cygnus.com>
353 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
354 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
356 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
358 * fr30-opc.c: Regenerated.
360 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
362 * fr30-opc.c: Regenerated.
363 * fr30-opc.h: Regenerated.
364 * fr30-dis.c: Regenerated.
365 * fr30-asm.c: Regenerated.
367 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
369 * po/opcodes.pot: Regenerated.
370 * fr30-opc.c: Regenerated.
371 * fr30-opc.h: Regenerated.
372 * fr30-dis.c: Regenerated.
373 * fr30-asm.c: Regenerated.
375 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
377 * disassemble.c (disassembler): Add support for FR30 target.
379 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
381 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
382 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
384 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
386 * po/opcodes.pot: Regenerate.
387 * po/POTFILES.in: Regenerate.
388 * fr30-opc.c: Regenerate.
389 * fr30-opc.h: Regenerate.
391 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
393 * m32r-asm.c: Regenerate.
395 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
397 * configure.in: Added case for bfd_fr30_arch.
398 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
399 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
400 (CLEANFILES): Added stamp-fr30.
402 * fr30-asm.c: New file.
403 * fr30-dis.c: New file.
404 * fr30-opc.c: New file.
405 * fr30-opc.h: New file.
406 * po/POTFILES.in: Regenerated
407 * po/opcodes.pot: Regenerated
409 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
411 * configure.in: detect cygwin* instead of cygwin32*
412 * configure: regenerate
414 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
416 * mips-opc.c (IS_M): Added.
418 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
420 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
422 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
424 * m32r-opc.h,m32r-opc.c: Regenerate.
426 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
428 * i386-dis.c (OP_3DNowSuffix): New static function.
431 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
432 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
433 (insn_codep): New static variable.
434 (print_insn_x86): Init insn_codep after prefixes.
435 (grps): Add GRP14 entries for prefetch, prefetchw.
438 From Jeff B Epler <jepler@usgs.gov>
439 * i386-dis.c (Suffix3DNow): New table.
441 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
443 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
445 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
447 * d10v-dis.c (print_operand): If num is nonzero, then
448 add OPERAND_ACC1, not OPERAND_ACC0.
450 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
452 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
455 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
457 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
460 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
462 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
464 1998-09-09 Michael Meissner <meissner@cygnus.com>
466 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
469 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
471 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
473 (print_insn_little_arm): Detect Thumb symbols in elf object
476 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
478 * alpha-dis.c (print_insn_alpha): Use the machine type to
479 decide which PALcode set to include.
481 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
483 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
485 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
487 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
488 MSUB and MSUBS instructions.
490 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
492 * ppc-opc.c (powerpc_operands): Omit parens around additions in
495 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
497 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
498 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
499 +, -, and d for ColdFire.
501 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
502 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
503 (extract_mbe): Likewise.
505 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
507 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
509 * m10300-opc.c: First cut at UDF instructions.
511 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
513 * m32r-opc.c: Regenerate (remove semantic descriptions).
515 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
517 * arm-dis.c (print_insn_big_arm): Fix indentation.
518 (print_insn_little_arm): Likewise.
520 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
522 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
524 (print_insn_little_arm): Likewise.
526 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
528 Move all global state data into opcode table struct, and treat
529 opcode table as something that is "opened/closed".
530 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
531 (cgen_asm_init): Delete.
532 (cgen_set_parse_operand_fn): New function.
533 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
534 (cgen_dis_init): Delete.
535 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
536 (cgen_current_{opcode_table_mach,endian}): Delete.
537 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
539 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
541 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
544 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
546 * m10300-opc.c: Add entries for "no_match_operands" field in
549 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
551 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
553 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
555 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
557 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
559 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
561 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
563 (OP_J): Remove unnecessary subtraction when 16-bit displacement
564 will be masked later.
566 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
568 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
570 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
572 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
574 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
576 * m10300-dis.c: Only recognize instructions from the currently
578 * m10300-opc.c: Add field indicating the particular variant of
579 the mn10300 each instruction is available on.
581 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
583 * configure.in: For bfd_vax_arch, build vax-dis.lo.
584 * Makefile.am: Rebuild dependencies.
585 (CFILES): Add vax-dis.c.
586 (ALL_MACHINES): Add vax-dis.lo.
587 * aclocal.m4: Rebuild with current libtool.
588 * configure, Makefile.in: Rebuild.
590 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
592 * vax-dis.c: New file, from work by Pauline Middelink
593 <middelin@polyware.iaf.nl>.
594 * disassemble.c (ARCH_vax): Define if ARCH_all.
595 (disassembler): Add case for ARCH_vax.
596 * makefile.vms: Support compilation on vms/vax.
598 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
600 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
601 related to sign extension and the size of ints.
603 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
605 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
606 instructions. Support (sp) addressing mode by expanding it into
609 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
611 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
613 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
615 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
617 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
619 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
622 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
624 * mips-dis.c (print_insn_little_mips): Previously, instruction
625 printing references the symbol table to determine whether the
626 instruction resides in a block regular instructions or mips16
627 instructions. However, when the disassembler gets used in other
628 environments where the symbol table is not present, we no longer
629 rely in the symbol table, rather, use the low bit of the
630 instructions address to guess. There should be no change for usage
631 of the disassembler in host based programs, gdb, objdump.
632 (print_insn_big_mips): ditto.
633 (print_insn_mips): ditto
635 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
637 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
639 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
641 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
643 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
645 * i386-dis.c (index16): Add '%' to register names. Use ','
648 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
650 * i386-dis.c: Don't print opcode suffix when we can figure out the
651 size (and gas can!) by register operands, or from the default
653 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
655 (dis386, dis386_twobyte, grps): Use new suffix macros.
656 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
657 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
658 order of cmps operands to agree with Intel docs. Correct operand
659 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
660 agree with Intel docs.
661 (print_insn_x86): Print orphan fwait before other prefixes.
662 Return correct byte count for orphan fwait with prefixes. Don't
663 print `bound' operands in reverse order.
664 (ckprefix): Stop accumulating prefixes if we get fwait.
665 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
667 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
669 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
670 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
672 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
674 Fix problems when bfd_vma is wider than long.
675 * i386-dis.c: Make op_address and start_pc unsigned.
676 (set_op): Make parameter unsigned.
677 (print_insn_x86): Cast to bfd_vma when passing a value to
679 * ns32k-dis.c (CORE_ADDR): Don't define.
680 (print_insn_ns32k): Change type of addr to bfd_vma. Use
681 bfd_scan_vma to read back address.
682 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
684 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
685 (NEXTULONG): New definition.
686 (print_insn_m68k): Avoid overflow when computing third argument of
688 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
689 Use disp instead of val to store offset values.
690 (print_indexed): Use base_disp instead of word to store base
691 displacement, to avoid overflow.
692 * m10300-dis.c (disassemble): Cast value to long when computing
693 pc-relative address, to get correct sign extension.
695 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
697 * m32r-opc.c: Regenerate.
699 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
701 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
702 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
704 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
706 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
708 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
710 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
712 (OP_DSreg): Rename from OP_DSSI.
713 (OP_ESreg): Rename from OP_ESDI.
714 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
716 (append_seg): Rename from append_prefix.
717 (ptr_reg): New function.
718 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
720 (PREFIX_ADDR): Rename from PREFIX_ADR.
721 (float_reg): Add non-broken opcodes for people who don't want
724 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
726 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
729 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
731 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
733 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
735 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
736 0; produce error message for shifts of size 32 (or 64 for 64-bit
737 shifts), because the hardware doesn't support them.
739 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
741 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
742 LONG_2, LONG_2b formats to use this new operand.
744 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
746 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
748 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
750 * sparc-dis.c (print_insn_sparc): big endian instruction / little
753 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
755 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
756 and SHORT_B3b formats to use Rb instead of Ra.
758 Add FLAG_MUL16 to MUL2XH opcode.
760 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
761 to existing 1.1.1 parallelisation prohibition procedure.
763 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
765 * m32r-asm.c,m32r-dis.c: Regenerate.
767 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
769 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
770 with a shift count of 0.
772 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
774 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
775 (cgen_hw_lookup_by_num): New function.
777 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
779 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
781 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
783 * sparc-dis.c (print_insn_sparc): Always fetch instructions
784 as big-endian on SPARClite.
786 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
788 * d30v-opc.c (pre_defined_register): Remove alias for r0.
790 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
792 * po/Make-in (install-info): New target.
794 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
796 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
797 * configure: Rebuild.
799 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
801 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
802 variety of ISA2 instructions to set bottom ten bits of trap code.
804 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
806 * Makefile.am (config.status): Add explicit target so that
807 config.status depends upon bfd/configure.in.
808 * Makefile.in: Rebuild.
810 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
812 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
813 instructions to set bottom ten bits of break code.
814 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
815 for above optional argument.
817 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
819 * makefile.vms: Run dec c with /nodebug.
821 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
823 * Makefile.in: Rebuilt.
824 * Makefile.am: Regenerated dependencies with mkdep.
826 * opintl.h (_): Define as dgettext.
828 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
830 * cgen-asm.c: Internationalised.
831 * m32r-asm.c: Internationalised.
832 * m32r-dis.c: Internationalised.
833 * m32r-opc.c: Internationalised.
835 * aclocal.m4: Regenerated.
836 * configure: Regenerated.
837 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
838 * Makefile.in: Rebuild.
839 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
840 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
842 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
844 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
846 * aclocal.m4, configure: Rebuild with current tools.
848 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
850 * opintl.h: New file - contains internationalisation macros used
851 by source files in this directory.
852 * po/: New subdirectory - contains internationalisation files.
853 * po/Make-in: New file - Makefile constructor.
854 * po/POTFILES.in: New file - list of files in opcodes directory
855 that should be scan for internationalisation macros.
856 * po/opcodes.pot: New file - list of internationisation strings
857 found in files mentioned in po/POTFILES.in.
858 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
859 entry. Add intl directory to include paths.
860 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
861 HAVE_STRCPY, HAVE_LC_MESSAGES
862 * configure.in: Add rule to build Makefile in po subdirectory.
863 * Makefile.in: Rebuilt.
864 * aclocal.m4: Rebuilt.
865 * config.in: Rebuilt.
866 * configure: Rebuilt.
867 * alpha-opc.c: Internationalised.
868 * arc-dis.c: Internationalised.
869 * arc-opc.c: Internationalised.
870 * arm-dis.c: Internationalised.
871 * cgen-asm.c: Internationalised.
872 * d30v-dis.c: Internationalised.
873 * dis-buf.c: Internationalised.
874 * h8300-dis.c: Internationalised.
875 * h8500-dis.c: Internationalised.
876 * i386-dis.c: Internationalised.
877 * m10200-dis.c: Internationalised.
878 * m10300-dis.c: Internationalised.
879 * m68k-dis.c: Internationalised.
880 * m88k-dis.c: Internationalised.
881 * mips-dis.c: Internationalised.
882 * ns32k-dis.c: Internationalised.
883 * opintl.h: Internationalised.
884 * ppc-opc.c: Internationalised.
885 * sparc-dis.c: Internationalised.
886 * v850-dis.c: Internationalised.
887 * v850-opc.c: Internationalised.
889 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
891 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
892 (asm_hash_table_entries): New variable.
893 (cgen_asm_init): Free asm_hash_table_entries.
894 (hash_insn_array,hash_insn_list): New functions.
895 (build_asm_hash_table): Use them. Hash macro insns as well.
896 (cgen_asm_lookup_insn): Update.
897 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
898 (dis_hash_table_entries): New variable.
899 (cgen_dis_init): Free dis_hash_table_entries.
900 (hash_insn_array,hash_insn_list): New functions.
901 (build_dis_hash_table): Use them. Hash macro insns as well.
902 (cgen_dis_lookup_insn): Update.
903 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
904 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
905 (cgen_macro_insn_count): New function.
906 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
908 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
910 * i386-dis.c (OP_DSSI): Print segment override.
912 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
914 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
917 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
919 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
920 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
921 * configure.in: Define and substitute WIN32LDFLAGS and
923 * aclocal.m4: Rebuild with new libtool.
924 * configure, Makefile.in: Rebuild.
926 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
928 * m32r-opc.c: Regenerate.
930 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
932 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
933 before trying to copy it.
934 * Makefile.in: Rebuild.
936 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
938 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
940 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
942 * ns32k-dis.c (bit_extract_simple): New function to extract bits
943 from an arbitrary valid buffer instead of fetching them on demand
945 (invalid_float): use bit_extract_simple() instead of bit_extract().
947 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
949 From H.J. Lu <hjl@gnu.org>:
950 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
953 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
955 * Branched binutils 2.9.
957 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
959 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
960 disassembling last 4 bytes of a section.
962 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
964 Fix some gcc -Wall warnings:
965 * arc-dis.c (print_insn): Add casts to avoid warnings.
966 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
967 * d10v-dis.c (dis_long, dis_2_short): Likewise.
968 * m10200-dis.c (disassemble): Likewise.
969 * m10300-dis.c (disassemble): Likewise.
970 * ns32k-dis.c (print_insn_ns32k): Likewise.
971 * ppc-opc.c (insert_ral, insert_ram): Likewise.
972 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
973 * cgen-opc.c (cgen_keyword_search_next): Likewise.
974 * d10v-dis.c (dis_long, dis_2_short): Likewise.
975 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
976 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
977 * tic80-dis.c (print_one_instruction): Likewise.
978 * w65-dis.c (print_operand): Likewise.
979 * z8k-dis.c (fetch_data): Likewise.
980 * a29k-dis.c: Add return type for find_byte_func_type.
981 * arc-opc.c: Include <stdio.h>. Remove declarations of
982 insert_multshift and extract_multshift.
983 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
985 (extract_value): Fully parenthesize expression.
986 * h8500-dis.c (print_insn_h8500): Initialize local variables.
987 * h8500-opc.h (h8500_table): Fully bracket initializer.
988 * w65-opc.h (optable): Likewise.
989 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
990 * i386-dis.c (OP_E): Initialize local variables.
991 * m10200-dis.c (print_insn_mn10200): Likewise.
992 * mips-dis.c (print_insn_mips16): Likewise.
993 * sh-dis.c (print_insn_shx): Likewise.
994 * v850-dis.c (print_insn_v850): Likewise.
995 * ns32k-dis.c (print_insn_arg): Declare.
996 (get_displacement, invalid_float): Declare.
997 (list_search, sign_extend, flip_bytes): Declare return type.
998 (get_displacement): Likewise.
999 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1001 (print_insn_ns32k): Make i unsigned.
1002 (invalid_float): Make static. Declare type of val.
1003 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1004 on each for iteration.
1005 * tic30-dis.c (get_indirect_operand): Likewise.
1006 * z8k-dis.c (print_insn_z8001): Declare return type.
1007 (print_insn_z8002): Likewise.
1008 (unparse_instr): Fix sprintf format strings.
1010 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1012 * mips-opc.c: Add "sync.l" and "sync.p".
1014 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1016 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1017 default m68k variant to recognize.
1019 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1020 (ctrl, cobr, mem, ea): Likewise.
1021 (print_addr): Likewise. Remove cast.
1022 (ea): Cast argument of print_addr to bfd_vma.
1024 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1026 (cgen_parse_unsigned_integer): Likewise.
1027 (cgen_parse_address): Likewise.
1029 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1031 * i960-dis.c (ctrl): Add full braces to structure initialization.
1032 (cobr, mem, reg): Likewise.
1033 (ea): Correct parenthesization in expression.
1035 * cgen-asm.c: Include <ctype.h>.
1036 (build_asm_hash_table): Remove unused local variable i.
1037 (cgen_parse_keyword): Add casts to avoid warnings.
1039 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1040 symbol. Fix indentation.
1041 (print_insn_little_arm): Likewise.
1043 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1045 * configure.in: Use AM_DISABLE_SHARED.
1046 * aclocal.m4, configure: Rebuild with libtool 1.2.
1048 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1050 These patches are courtesy of Jonathan Walton and Tony Thompson
1051 (athompso@cambridge.arm.com).
1053 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1056 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1057 both the offset and the label closest to the destination.
1059 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1061 * m32r-opc.h: Regenerate.
1063 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1065 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1067 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1069 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1070 assume that info->symbols is non-empty.
1072 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1074 * alpha-opc.c (cvtqs) There is no such thing.
1075 (cvttq): Missing most of the /*d variants.
1077 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1079 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1080 delayed branches or jumps.
1082 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1084 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1086 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1087 * tic30-dis.c (print_branch): Likewise.
1089 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1091 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1092 saved_symbol code as it is no longer needed.
1094 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1096 * cgen-asm.c: Include symcat.h.
1097 * cgen-dis.c,cgen-opc.c: Ditto.
1098 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1100 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1102 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1104 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1106 * m32r-opc.[ch]: Regenerate.
1108 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1110 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1111 arguments. Don't perform validation here.
1112 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1114 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1116 * m32r-opc.c: Regenerate.
1118 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1120 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1121 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1123 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1125 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1127 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1129 * configure.in: Get the version number from BFD.
1130 * configure: Rebuild.
1132 From H.J. Lu <hjl@gnu.org>:
1133 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1134 * Makefile.in: Rebuild.
1136 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1138 * m32r-opc.c: Regenerate.
1139 * m32r-opc.h: Regenerate.
1141 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1143 * m32r-opc.c: Regenerate.
1145 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1147 Fix rac to accept only a0:
1148 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1149 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1150 Introduce OPERAND_GPR.
1151 * d10v-dis.c (print_operand): Likewise.
1153 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1155 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1156 (cgen_hw_lookup): Make result const.
1157 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1159 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1161 * configure, aclocal.m4: Rebuild with new libtool.
1163 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1165 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1166 instructions use a PC relative branch, not absolute.
1168 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1170 * configure.in: Set libtool_enable_shared rather than
1171 libtool_shared. Remove diversion hack.
1172 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1174 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1176 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1177 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1179 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1181 * tic30-dis.c: New file.
1182 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1183 * configure.in: Handle bfd_tic30_arch.
1184 * Makefile.am: Rebuild dependencies.
1185 (CFILES): Add tic30-dis.c
1186 (ALL_MACHINES): Add tic30-dis.lo.
1187 * configure, Makefile.in: Rebuild.
1189 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1191 * m32r-opc.h (HAVE_CPU_M32R): Define.
1193 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1195 * v850-opc.c (insertion routines): If both alignment and size is
1196 wrong then report this.
1198 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1200 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1201 Only recognize instructions for the current target_processor.
1203 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1205 * d10v-dis.c (PC_MASK): Correct value.
1206 (print_operand): If there's a reloc, don't calculate the
1207 address because they could be in different sections.
1209 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1211 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1212 instruction after the 4650's "mul" instruction; nobody's using the
1213 4010 these days. If object files someday indicate which processor
1214 variant they're intended for, we can do a better job at this.
1216 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1218 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1219 table provided entry size. Use CGEN_INSN_MNEMONIC.
1220 (cgen_parse_keyword): Rewrite.
1221 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1222 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1223 * cgen-opc.c: Clean up pass over `struct foo' usage.
1224 (cgen_keyword_lookup_value): Handle "" entry.
1225 (cgen_keyword_add): Likewise.
1227 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1229 * mips-opc.c: Add FP_D to s.d instruction flags.
1231 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1233 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1235 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1237 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1238 PC relative offset forms before the 15 bit forms. An assembler command
1239 line option now chooses the default.
1241 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1243 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1244 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1246 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1248 * configure: Only build libopcodes shared if --enable-shared's value
1249 was `yes', or was set to `*opcodes*'.
1250 * aclocal.m4: Likewise.
1251 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1252 original source of this bit of code. It's not clear what the best fix
1255 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1257 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1258 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1259 offset forms before the 15 bit forms, to default to the long forms.
1261 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1263 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1265 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1267 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1268 symbol if none is present.
1269 (print_insn_big_arm): Prevent examination of stored symbol if
1272 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1274 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1276 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1278 * disassemble.c: Remove disasm_symaddr() function.
1280 * arm-dis.c: Use info->symbol instead of info->flags to determine
1281 if disassmbly should be in Thumb or Arm mode.
1283 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1285 * arm-dis.c: Add support for disassembling Thumb opcodes.
1286 (print_insn_thumb): New function.
1288 * disassemble.c (disasm_symaddr): New function.
1290 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1291 (thumb_opcodes): Table of Thumb opcodes.
1293 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1295 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1297 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1298 and 'v' as operand types.
1300 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1302 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1303 <olivier.carmona@di.epfl.ch>.
1304 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1305 which has a two word opcode with a one word argument.
1307 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1309 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1310 unsigned, not signed.
1311 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1313 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1315 * d10v-dis.c (print_operand):
1316 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1318 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1320 * d10v-opc.c (OPERAND_FLAG): Split into:
1321 (OPERAND_FFLAG, OPERAND_CFLAG) .
1325 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1327 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1328 field for all INSN_MACRO's.
1329 * mips16-opc.c: same
1331 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1333 * mips-opc.c (sync,cache): These are 3900 insns.
1335 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1337 sh-opc.h (sh_table): Remove ftst/nan.
1339 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1341 * mips-opc.c (ffc, ffs): Fix mask.
1343 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1345 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1348 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1350 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1351 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1353 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1355 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1356 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1358 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1360 * v850-dis.c (disassemble): Replace // with /* ... */
1362 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1364 * sparc-opc.c: Add wr & rd for v9a asr's.
1365 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1366 (v9a_asr_reg_names): New variable.
1367 Patch from David Miller <davem@vger.rutgers.edu>.
1369 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1371 * sparc-opc.c (v9notv9a): New insn type.
1372 (IMPDEP): Move to the end to not conflict with edge8 et al.
1373 Patch from David Miller <davem@vger.rutgers.edu>.
1375 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1377 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1379 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1381 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1383 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1385 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1386 of disassemble_info structure to determine if an overlay address
1387 has a matching symbol in low memory.
1389 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1390 new symbol_at_address_func field in disassemble_info structure.
1392 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1394 * v850-opc.c (extract_d22): Use signed arithmatic.
1396 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1398 * mips-opc.c: Three op mult is not an ISA insn.
1400 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1402 * mips-opc.c: Fix formatting.
1404 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1406 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1407 than assuming that char is signed. Explicitly sign extend 16 bit
1408 values, rather than assuming that short is 16 bits.
1409 (OP_sI, OP_J, OP_DIR): Likewise.
1411 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1413 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1416 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1418 * v850-opc.c: Fix typo in comment.
1420 * v850-dis.c (disassemble): Add test of processor type when
1421 determining opcodes.
1423 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1425 * configure.in: Use a diversion to set enable_shared before the
1426 arguments are parsed.
1427 * configure: Rebuild.
1429 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * m68k-opc.c (TBL1): Use ! rather than `.
1432 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1434 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1436 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1438 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1440 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1443 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1444 * aclocal.m4: Rebuild with new libtool.
1445 * configure: Rebuild.
1447 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1449 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1451 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1453 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1455 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1457 * v850-opc.c (v850_opcodes): Further rearrangements.
1459 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1461 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1463 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1465 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1468 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1470 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1472 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1474 * v850-opc.c: Initialise processors field of v850_opcode structure.
1476 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1478 Merge changes from Martin Hunt:
1480 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1482 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1483 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1484 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1486 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1488 * d30v-dis.c (print_insn): First operand of d*i (delayed
1489 branch) instructions is relative.
1491 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1492 (d30v_operand_table): Add IMM6S3 type.
1493 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1495 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1496 and cmp instructions.
1498 * d30v-opc.c: Correct entries for repeat*, and sat*.
1499 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1500 types. Correct several formats.
1502 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1504 * d30v-opc.c (pre_defined_registers): Change control registers.
1506 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1507 SHORT_C2. Manual was incorrect.
1509 * d30v-dis.c (lookup_opcode): Return value now indicates
1510 if an opcode has a short and a long form. Used for deciding
1511 to append a ".s" or ".l".
1512 (print_insn): Append a ".s" to an instruction if it is
1513 the short form and ".l" if it is a long form. Do not append
1514 anything if the instruction has only one possible size.
1516 * d30v-opc.c: Change mulx2h to require an even register.
1517 New form: SHORT_A2; a SHORT_A form that needs an even
1518 register as the first operand.
1520 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1521 instruction was not being disassembled if there were an odd
1522 number of instructions.
1524 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1526 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1528 * v850-dis.c (disassemble): Improved display of register lists.
1530 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1532 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1533 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1534 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1535 fandnot1s, fandnot2s.
1537 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1539 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1541 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1543 * cgen-asm.c (cgen_parse_address): New argument resultp.
1544 All callers updated.
1545 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1547 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1549 * mn10200-dis.c (disassemble): PC relative instructions are
1550 relative to the next instruction, not the current instruction.
1552 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1554 * v850-dis.c (disassemble): Only signed extend values that are not
1555 returned by extract functions.
1556 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1558 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1560 * v850-opc.c: Update comments. Remove use of
1561 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1563 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1565 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1567 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1569 * configure: Rebuilt with latest devo autoconf for NT support.
1571 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1573 * v850-dis.c (disassemble): Use curly brace syntax for register
1576 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1577 where r0 is being used as a destination register.
1579 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1581 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1583 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1585 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1587 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1589 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1590 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1593 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1595 * configure (cgen_files): Add support for v850e target.
1596 * configure.in (cgen_files): Add support for v850e target.
1598 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1600 * configure (cgen_files): Add support for v850ea target.
1601 * configure.in (cgen_files): Add support for v850ea target.
1603 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1605 * configure.in (bfd_arc_arch): Add.
1606 * configure: Rebuild.
1607 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1608 * Makefile.in: Rebuild.
1609 * arc-dis.c, arc-opc.c: New files.
1610 * disassemble.c (ARCH_all): Define ARCH_arc.
1611 (disassembler): Add ARC support.
1613 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1615 * v850-dis.c (disassemble): Add support for v850EA instructions.
1617 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1618 (v850_opcodes): Add v850EA instructions.
1620 * v850-dis.c (disassemble): Add support for v850E instructions.
1622 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1623 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1624 insert_spe, extract_spe): New Functions.
1625 (v850_opcodes): Add v850E instructions.
1627 * v850-opc.c: Reorganised and re-layed out to improve readability
1630 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1632 * configure: Rebuild with autoconf 2.12.1.
1634 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1636 * aclocal.m4, configure: Rebuild with new automake patches.
1638 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1640 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1641 * acinclude.m4: Just include acinclude.m4 from BFD.
1642 * aclocal.m4, configure: Rebuild.
1644 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1646 * Makefile.am: New file, based on old Makefile.in.
1647 * acconfig.h: New file.
1648 * acinclude.m4: New file.
1649 * stamp-h.in: New file.
1650 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1651 Removed shared library handling; now handled by libtool. Replace
1652 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1653 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1654 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1655 handling in AC_OUTPUT.
1656 * dep-in.sed: Change .o to .lo.
1657 * Makefile.in: Now built with automake.
1658 * aclocal.m4: Now built with aclocal.
1659 * config.in, configure: Rebuild.
1661 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1663 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1665 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1667 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1669 * sparc-dis.c (sorted_opcodes): New static local.
1670 (struct opcode_hash): `opcode' is pointer to const element.
1671 (build_hash): First arg is now table of sorted pointers.
1672 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1673 (compare_opcodes): Update.
1675 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1677 * cgen-opc.c: #include <ctype.h>.
1678 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1679 Handle case insensitive hashing.
1680 (hash_keyword_value): Change type of `value' to unsigned int.
1682 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1684 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1685 precision FP, mark it as such. Likewise for double precision
1686 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1689 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1691 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1693 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1694 nesting depth when all the macros are expanded.
1696 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1698 * sparc-opc.c: The fcmp v9a instructions take an integer register
1699 as a destination, not a floating point register. From Christian
1700 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1702 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1704 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1705 syntax. From Roman Hodek
1706 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1708 * i386-dis.c (twobyte_has_modrm): Fix pand.
1710 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1712 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1714 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1716 * arm-dis.c: Add prototypes for arm_decode_shift and
1719 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1721 * mips-opc.c: Add r3900 insns.
1723 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1725 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1726 print delay slot instructions on the same line. When using a PC
1727 relative load, add a comment with the value being loaded if it can
1730 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1732 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1733 to pushS/popS for segment regs and byte constant so that
1734 pushw/popw printed when in 16 bit data mode.
1736 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1737 print cbtw, cwtd in 16 bit data mode.
1738 * i386-dis.c (putop): extra case W to support above.
1740 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1741 address size prefix in 16 bit address mode.
1743 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1745 * sh-dis.c: Reindent. Rename local variable fprintf to
1748 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1750 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1752 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1754 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1756 * mips16-opc.c (mip16_opcodes): same.
1758 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1760 * m68k-opc.c (moveb): Change $d to %d.
1762 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1764 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1765 (twobyte_has_modrm): Likewise.
1767 (OP_MMX, OP_EM, OP_MS): New static functions.
1769 * i386-dis.c: Revert patch of April 4. The output now matches
1772 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1774 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1777 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1779 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1781 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1783 * Makefile.in (install): Depend upon installdirs.
1784 (installdirs): New target.
1786 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1788 From Thomas Graichen <graichen@rzpd.de>:
1789 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1790 * configure: Rebuild.
1792 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1794 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1795 Delete string{,s}.h support.
1797 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1799 * cgen-asm.c (cgen_parse_operand_fn): New global.
1800 (cgen_parse_{{,un}signed_integer,address}): Update call to
1801 cgen_parse_operand_fn.
1802 (cgen_init_parse_operand): New function.
1803 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1804 from cgen_asm_init_parse.
1805 (m32r_cgen_assemble_insn): New operand `errmsg'.
1806 Delete call to as_bad, return error message to caller.
1807 (m32r_cgen_asm_hash_keywords): #if 0 out.
1809 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1811 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1813 [case 'J']: Fix typo in register name.
1815 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1817 * configure.in: Substitute SHLIB_LIBS.
1818 * configure: Rebuild.
1819 * Makefile.in (SHLIB_LIBS): New variable.
1820 ($(SHLIB)): Use $(SHLIB_LIBS).
1822 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1824 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1826 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1828 * disassemble.c (disassembler): Handle m32r.
1830 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1832 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1833 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1834 * Makefile.in (CFILES): Add them.
1835 (ALL_MACHINES): Add them.
1836 (dependencies): Regenerate.
1837 * configure.in (cgen_files): New variable.
1838 (bfd_m32r_arch): Add entry.
1839 * configure: Regenerate.
1841 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1843 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1844 * configure: Rebuild.
1846 * Makefile.in: Rebuild dependencies.
1848 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1850 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1853 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1855 * Branched binutils 2.8.
1857 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1859 * m10200-dis.c: Rename from mn10200-dis.c.
1860 * m10200-opc.c: Rename from mn10200-opc.c.
1861 * m10300-dis.c: Rename from mn10300-dis.c
1862 * m10300-opc.c: Rename from mn10300-opc.c.
1863 * Makefile.in: Update accordingly.
1865 * mips16-opc.c: Add mul and dmul macros.
1867 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1869 * makefile.vms: Update CFLAGS, add clean target.
1871 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1873 * mips-opc.c: Add "wait". From Ralf Baechle
1874 <ralf@gnu.ai.mit.edu>.
1876 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1877 * configure, config.in: Rebuild.
1878 * sysdep.h: Include <stdlib.h> if it exists.
1879 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1881 * Makefile.in: Rebuild dependencies.
1883 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1885 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1886 Andrew Bray <andy@madhouse.demon.co.uk>.
1888 * mips-opc.c: Add cast when setting mips_opcodes.
1890 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1892 * v850-dis.c (disassemble): Fix sign extension problem.
1893 * v850-opc.c (extract_d*): Fix sign extension problems to make
1894 disassembly calculate branch offsets correctly.
1896 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1898 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1900 * mips-opc.c: Add dctr and dctw.
1902 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1904 * d30v-dis.c (print_insn): Change the way signed constants
1907 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * Makefile.in (BFD_H): New variable.
1910 (HFILES): New variable.
1911 (CFILES): Add all C files.
1912 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1913 Delete old dependencies, and build new ones.
1914 * dep-in.sed: New file.
1916 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1918 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1920 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1922 * mn10200-opc.c: Change "trap" to "syscall".
1923 * mn10300-opc.c: Add new "syscall" instruction.
1925 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1927 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1928 mulul insns on the coldfire.
1930 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1932 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1933 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1934 (print_insn_little_arm): Likewise.
1936 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1938 Based on patches from H.J. Lu <hjl@lucon.org>:
1939 * i386-dis.c (fetch_data): Add prototype.
1940 * m68k-dis.c (fetch_data): Add prototype.
1941 (dummy_print_address): Add prototype. Make static.
1942 * ppc-opc.c (valid_bo): Add prototype.
1943 * sparc-dis.c (build_hash_table): Add prototype.
1944 (is_delayed_branch, compute_arch_mask): Add prototypes.
1945 (print_insn_sparc): Make several local variables const.
1946 (compare_opcodes): Change arguments to const PTR. Add prototype.
1947 * sparc-opc.c (arg): Change name field to be const.
1948 (lookup_name, lookup_value): Add prototypes. Change table and
1949 name parameters to be const.
1950 (sparc_encode_asi): Change name parameter to be const.
1951 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1952 (sparc_encode_sparclet_cpreg): Likewise.
1953 (sparc_decode_asi): Change return type to be const.
1954 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1955 (sparc_decode_sparclet_cpreg): Likewise.
1957 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1960 Solaris doesn't like the combined options, and the -f is
1962 (stamp-tshlink, install): Likewise.
1964 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1966 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1969 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1971 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1973 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1975 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1978 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1980 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1982 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1984 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1986 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1988 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1990 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1992 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1993 floatformat_to_double to make portable.
1994 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1997 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1999 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2000 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2002 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2004 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2005 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2007 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2009 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2010 (OFF_SL_BR_SCALED): ... to this, and added the flag
2011 TIC80_OPERAND_BASEREL to the flags word.
2012 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2015 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2017 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2018 Change mips_opcodes from const array to a pointer,
2019 and change bfd_mips_num_opcodes from const int to int,
2020 so that we can increase the size of the mips opcodes table
2023 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2025 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2026 store BITNUM values in the table in one's complement form
2027 to match behavior when assembler is given a raw numeric
2028 value for a BITNUM operand.
2029 * tic80-dis.c (print_operand_bitnum): Ditto.
2031 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2033 * d30v-opc.c: Removed references to FLAG_X.
2035 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2037 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2039 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2041 * Makefile.in: Added d30v object files.
2042 * configure: (bfd_d30v_arch) Rebuilt.
2043 * configure.in: (bfd_d30v_arch) Added new case.
2044 * d30v-dis.c: New file.
2045 * d30v-opc.c: New file.
2046 * disassemble.c (disassembler) Add entry for d30v.
2048 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2050 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2051 representations for the floating point BITNUM values.
2053 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2055 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2056 in the table in one's complement form, as they appear in the
2058 (tic80_symbol_to_value): Use macros to access predefined
2060 (tic80_value_to_symbol): Ditto.
2061 (tic80_next_predefined_symbol): New function.
2062 * tic80-dis.c (print_operand_bitnum): Remove code that did
2063 one's complement for BITNUM values.
2065 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2067 * makefile.vms: Remove 8 bit characters. Update to latest
2070 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2072 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2074 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2076 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2077 (IMM24_PCREL): Likewise.
2079 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2081 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2082 address for an extended PC relative instruction that is not a
2085 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2087 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2090 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2092 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2093 (tic80_opcodes): Sort entries so that long immediate forms
2094 come after short immediate forms, making it easier for
2095 assembler to select the right one for a given operand.
2097 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2099 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2101 (print_insn_mips16): Likewise.
2103 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2105 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2106 a symbol class that restricts translation to just that
2107 class (general register, condition code, etc).
2109 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2111 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2112 and REG_DEST_E for register operands that have to be
2113 an even numbered register. Add REG_FPA for operands that
2114 are one of the floating point accumulator registers.
2115 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2116 (tic80_opcodes): Change entries that need even numbered
2117 register operands to use the new operand table entries.
2118 Add "or" entries that are identical to "or.tt" entries.
2120 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * mips16-opc.c: Add new cases of exit instruction for
2124 * mips-dis.c (print_mips16_insn_arg): Display floating point
2125 registers in operands of exit instruction. Print `$' before
2126 register names in operands of entry and exit instructions.
2128 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2130 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2131 pairs for all predefined symbols recognized by the assembler.
2132 Also used by the disassembling routines.
2133 (tic80_symbol_to_value): New function.
2134 (tic80_value_to_symbol): New function.
2135 * tic80-dis.c (print_operand_control_register,
2136 print_operand_condition_code, print_operand_bitnum):
2137 Remove private tables and use tic80_value_to_symbol function.
2139 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2141 * d10v-dis.c (print_operand): Change address printing
2142 to correctly handle PC wrapping. Fixes PR11490.
2144 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2146 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2149 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2151 * mips-dis.c (print_insn_mips16): Set insn_info information.
2152 (print_mips16_insn_arg): Likewise.
2154 * mips-dis.c (print_insn_mips16): Better handling of an extend
2155 opcode followed by an instruction which can not be extended.
2157 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2159 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2160 coldfire moveb instruction to not allow an address register as
2161 destination. Although the documentation does not indicate that
2162 this is invalid, experiments uncovered unexpected behavior.
2163 Added a comment explaining the situation. Thanks to Andreas
2164 Schwab for pointing this out to me.
2166 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2168 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2169 entries are presorted so that entries with the same mnemonic are
2170 adjacent to each other in the table. Sort the entries for each
2171 instruction so that this is true.
2173 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2175 * m68k-dis.c: Include <libiberty.h>.
2176 (print_insn_m68k): Sort the opcode table on the most significant
2177 nibble of the opcode.
2179 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2181 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2182 "vsub", "vst", "xnor", and "xor" instructions.
2183 (V_a1): Renamed from V_a, msb of accumulator reg number.
2184 (V_a0): Add macro, lsb of accumulator reg number.
2186 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2188 * tic80-dis.c (print_insn_tic80): Broke excessively long
2189 function up into several smaller ones and arranged for
2190 the instruction printing function to be callable recursively
2191 to print vector instructions that have both a load and a
2192 math instruction packed into a single opcode.
2193 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2194 to explain why it comes after the other vector opcodes.
2196 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2198 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2199 move insns to handle immediate operands.
2201 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2203 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2204 fix operand mask in the "moveml" entries for the coldfire.
2206 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2208 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2209 New macros for building vector instruction opcodes.
2210 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2211 FMT_LI, which were unused. The field is now a flags field.
2212 Remove some opcodes that are possible, but illegal, such
2213 as long immediate instructions with doubles for immediate
2214 values. Add "vadd" and "vld" instructions.
2216 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2218 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2219 the order more logical. Move the shift alias instructions ("rotl",
2220 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2221 interspersed with the regular sr.x and sl.x instructions. Add
2222 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2223 "sub", "subu", "swcr", and "trap".
2225 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2227 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2228 (OFF_SL_PC): Renamed from OFF_SL.
2229 (OFF_SS_BR): New operand type for base relative operand.
2230 (OFF_SL_BR): New operand type for base relative operand.
2231 (REG_BASE): New operand type for base register operand.
2232 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2233 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2234 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2236 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2237 10 char field, padded with spaces on rhs, rather than a string
2238 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2239 than old TIC80_OPERAND_RELATIVE. Add support for new
2240 TIC80_OPERAND_BASEREL flag bit.
2242 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2244 * tic80-dis.c (print_insn_tic80): Print floating point operands
2246 * tic80-opc.c (SPFI): Add single precision floating point
2247 immediate operand type.
2248 (ROTATE): Add rotate operand type for shifts.
2249 (ENDMASK): Add for shifts.
2250 (n): Macro for the 'n' bit.
2251 (i): Macro for the 'i' bit.
2252 (PD): Macro for the 'PD' field.
2253 (P2): Macro for the 'P2' field.
2254 (P1): Macro for the 'P1' field.
2255 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2258 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2260 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2261 adding in current address for pc-relative operands.
2263 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2265 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2266 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2267 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2268 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2269 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2270 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2271 (REG_SCALED, LSI_SCALED): New operand types.
2272 (E): New macro for 'E' bit at bit 27.
2273 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2274 opcodes, including the various size flavors (b,h,w,d) for
2275 the direct load and store instructions.
2277 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2279 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2281 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2282 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2283 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2284 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2285 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2286 masks with "MASK_* & ~M_*" to get the M bit reset.
2287 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2289 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2291 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2292 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2293 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2295 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2296 CC, SICR, and LICR table entries.
2297 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2298 "bcnd", and "brcr" opcodes.
2300 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2302 * ppc-opc.c (powerpc_operands): Make comment match the
2303 actual fields (no shift field).
2304 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2305 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2306 partial implementation, work in progress.
2307 * tic80-opc.c (tic80_operands): Begin construction operands table.
2308 (tic80_opcodes): Continue populating opcodes table and start
2309 filling in the operand indices.
2310 (tic80_num_opcodes): Add this.
2312 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2314 * m68k-opc.c: Add #B case for moveq.
2316 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2318 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2319 before they are used.
2321 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2323 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2324 for "breakpoint" instruction.
2326 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2328 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2329 (dep): Use ALL_CFLAGS rather than CFLAGS.
2331 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2333 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2336 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2338 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2339 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2341 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2343 * mips16-opc.c: Add "abs".
2345 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2347 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2348 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2349 (disassembler): Add bfd_arch_tic80 support to set disassemble
2350 to print_insn_tic80.
2351 * tic80-dis.c (print_insn_tic80): Add stub.
2353 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2355 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2356 * configure: Regenerate with autoconf.
2357 * tic80-dis.c: Add file.
2358 * tic80-opc.c: Add file.
2360 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2362 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2364 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2366 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2367 (mn10200_opcodes): Use it for some logicals and btst insns.
2368 Add "break" and "trap" instructions.
2370 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2372 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2374 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2376 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2377 relative load or add now depends upon whether the instruction is
2380 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2382 * mn10200-dis.c: Finish writing disassembler.
2383 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2384 Fix mask for "jmp (an)".
2386 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2387 handle endianness issues for mn10300.
2389 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2391 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2393 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2394 instruction. Fix opcode field for "movb (imm24),dn".
2396 * mn10200-opc.c (mn10200_operands): Fix insertion position
2399 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2401 * mn10200-opc.c: Create mn10200 opcode table.
2402 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2403 but moving along nicely.
2405 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2407 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2409 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2411 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2412 specifiers for fmovem* instructions.
2414 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2416 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2418 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2420 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2423 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2425 * mn10300-opc.c: Add some comments explaining the various
2428 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2430 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2432 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2435 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2436 operand specifiers in fmovm* instructions.
2438 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2440 * ppc-opc.c (insert_li): Give an error if the offset has the two
2441 least significant bits set.
2443 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2445 * mips-dis.c (print_insn_mips16): Separate the instruction from
2446 the arguments with a tab, not a space.
2448 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2450 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2453 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2456 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2458 * configure: Rebuild with autoconf 2.12.
2460 Add support for mips16 (16 bit MIPS implementation):
2461 * mips16-opc.c: New file.
2462 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2463 (mips16_reg_names): New static array.
2464 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2465 after seeing a 16 bit symbol.
2466 (print_insn_little_mips): Likewise.
2467 (print_insn_mips16): New static function.
2468 (print_mips16_insn_arg): New static function.
2469 * mips-opc.c: Add jalx instruction.
2470 * Makefile.in (mips16-opc.o): New target.
2471 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2472 * configure: Rebuild.
2474 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2476 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2477 operand specifiers in *save, *restore and movem* instructions.
2479 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2482 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2483 register operands for immediate arithmetic, not, neg, negx, and
2484 set according to condition instructions.
2486 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2487 specifier of the effective-address operand in immediate forms of
2488 arithmetic instructions. The specifier for the immediate operand
2489 notes how and where the constant will be stored.
2491 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2493 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2496 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2499 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2501 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2503 * mn10300-dis.c (disassemble): Handle register lists.
2505 * mn10300-opc.c: Fix handling of register list operand for
2506 "call", "ret", and "rets" instructions.
2508 * mn10300-dis.c (disassemble): Print PC-relative and memory
2509 addresses symbolically if possible.
2510 * mn10300-opc.c: Distinguish between absolute memory addresses,
2511 pc-relative offsets & random immediates.
2513 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2515 (disassemble): Handle SPLIT and EXTENDED operands.
2517 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2519 * mn10300-dis.c: Rough cut at printing some operands.
2521 * mn10300-dis.c: Start working on disassembler support.
2522 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2524 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2526 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2528 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2530 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2532 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2534 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2535 register argument is calls and jmp instructions.
2537 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2539 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2540 getx operand. Fix opcode for mulqu imm,dn.
2542 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2544 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2545 in MN10300_OPERAND_SPLIT operands for how many bits
2546 appear in the basic insn word. Add IMM32_HIGH24,
2547 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2548 (mn10300_opcodes): Use new operands as needed.
2550 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2551 for bset, bclr, btst instructions.
2552 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2554 * mn10300-opc.c (mn10300_operands): Remove many redundant
2555 operands. Update opcode table as appropriate.
2556 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2557 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2559 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2561 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2562 operands (for indexed load/stores). Fix bitpos for DI
2563 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2564 few instructions that insert immediates/displacements in the
2565 middle of the instruction. Add IMM8E for 8 bit immediate in
2566 the extended part of an instruction.
2567 (mn10300_operands): Use new opcodes as appropriate.
2569 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2571 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2572 sequential so the assembler never parallelizes it with
2575 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2577 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2578 a data/address register that appears in register field 0
2579 and register field 1.
2580 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2582 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2584 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2585 standard disassembly.
2587 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2588 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2589 Recategorize PALcode instructions.
2591 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2593 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2595 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2597 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2598 there are no operand types.
2600 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2602 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2604 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2606 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2608 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2610 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2612 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2613 and sst.w instructions.
2615 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2618 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2620 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2623 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2625 * ppc-opc.c (PPCPWR2): Define.
2626 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2629 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2631 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2632 field for movhu instruction.
2634 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2635 cast value to "long" not "signed long" to keep hpux10
2638 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2640 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2643 * mn10300-opc.c (FMT*): Remove definitions.
2645 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2646 for shift-by-register opcodes.
2648 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2649 into [AD][MN][01] for encoding the position of the register
2652 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2654 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2655 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2657 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2659 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2660 Fix various typos. Add "PAREN" operand.
2661 (MEM, MEM2): Define.
2662 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2663 operands. Fix several typos.
2665 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2668 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2670 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2671 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2673 (mn10300_opcodes): Break opcode format out into its own field.
2674 Update many operand fields to deal with signed vs unsigned
2675 issues. Fix one or two typos in the "mov" instruction
2676 opcode, mask and/or operand fields.
2678 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2680 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2681 m68851 wasn't reset.
2683 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2685 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2686 all opcodes. Very rough cut at operands for all opcodes.
2688 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2691 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2693 * mn10200-opc.c, mn10300-opc.c: New files.
2694 * mn10200-dis.c, mn10300-dis.c: New files.
2695 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2696 * disassemble.c: Break mn10x00 support into 10200 and 10300
2698 * configure.in: Likewise.
2699 * configure: Rebuilt.
2701 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2703 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2705 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2707 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2709 * disassemble (ARCH_mn10x00): Define.
2710 (disassembler): Handle bfd_arch_mn10x00.
2711 * configure.in: Recognize bfd_mn10x00_arch.
2712 * configure: Rebuilt.
2714 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2716 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2717 accordingly. Don't declare functions using op_rtn.
2719 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2721 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2722 params to be more standard.
2723 * (disassemble): Print absolute addresses and symbolic names for
2724 branch and jump targets.
2725 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2727 * (v850_opcodes): Add breakpoint insn.
2729 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2731 * m68k-opc.c: Move the fmovemx data register cases before the
2732 other cases, so that they get recognized before the data register
2733 does gets treated as a degenerate register list.
2735 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2737 * mips-opc.c: Add a case for "div" and "divu" with two registers
2738 and a destination of $0.
2740 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2742 * mips-dis.c (print_insn_arg): Add prototype.
2743 (_print_insn_mips): Ditto.
2745 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2747 * mips-dis.c (print_insn_arg): Print condition code registers as
2750 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2752 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2754 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2756 * v850-dis.c (disassemble): Make static. Provide prototype.
2758 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2760 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2763 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2765 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2766 ']' characters into the output stream.
2767 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2768 Add "memop" field to all opcodes (for the disassembler).
2769 Reorder opcodes so that "nop" comes before "mov" and "jr"
2770 comes before "jarl".
2772 * v850-dis.c (print_insn_v850): Fix typo in last change.
2774 * v850-dis.c (print_insn_v850): Properly handle disassembling
2775 a two byte insn at the end of a memory region when the memory
2776 region's size is only two byte aligned.
2778 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2780 * v850-dis.c (v850_reg_names): Define.
2781 (v850_sreg_names, v850_cc_names): Likewise.
2782 (disassemble): Very rough cut at printing operands (unformatted).
2784 * v850-opc.c (BOP_MASK): Fix.
2785 (v850_opcodes): Fix mask for jarl and jr.
2787 * v850-dis.c: New file. Skeleton for disassembler support.
2788 * Makefile.in Remove v850 references, they're not needed here.
2789 * configure.in: Add v850-dis.o when building v850 toolchains.
2790 * configure: Rebuilt.
2791 * disassemble.c (disassembler): Call v850 disassembler.
2793 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2794 (insert_d8_6, extract_d8_6): New functions.
2795 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2796 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2798 (IF4A, IF4B): Use "D7" instead of "D7S".
2799 (IF4C, IF4D): Use "D8_7" instead of "D8".
2800 (IF4E, IF4F): New. Use "D8_6".
2801 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2802 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2804 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2805 (v850_operands): Change D16 to D16_15, use special insert/extract
2806 routines. New new D16 that uses the generic insert/extract code.
2807 (IF7A, IF7B): Use D16_15.
2808 (IF7C, IF7D): New. Use D16.
2809 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2811 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2812 message. Issue an error if the branch offset is odd.
2814 * v850-opc.c: Add notes about needing special insert/extract
2815 for all the load/store insns, except "ld.b" and "st.b".
2817 * v850-opc.c (insert_d22, extract_d22): New functions.
2818 (v850_operands): Use insert_d22 and extract_d22 for
2820 (insert_d9): Fix range check.
2822 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2824 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2825 and set bits field to D9 and D22 operands.
2827 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2829 * v850-opc.c (v850_operands): Define SR2 operand.
2830 (v850_opcodes): "ldsr" uses R1,SR2.
2832 * v850-opc.c (v850_opcodes): Fix opcode specs for
2833 sld.w, sst.b, sst.h, sst.w, and nop.
2835 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2837 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2838 end of the opcode table.
2840 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2842 * d10v-opc.c (pre_defined_registers): Added register pairs,
2843 "r0-r1", "r2-r3", etc.
2845 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2847 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2848 Create I16U for an unsigned 16bit mmediate operand.
2849 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2851 * v850-opc.c (v850_operands): Define EP operand.
2852 (IF4A, IF4B, IF4C, IF4D): Use EP.
2854 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2855 with immediate operand, "movhi". Tweak "ldsr".
2857 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2858 correct. Get sld.[bhw] and sst.[bhw] closer.
2860 * v850-opc.c (v850_operands): "not" is a two byte insn
2862 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2864 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2866 * v850-opc.c (two): Get order of words correct.
2868 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2870 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2871 register source and destination operands.
2872 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2874 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2875 same thinko in "trap" opcode.
2877 * v850-opc.c (v850_opcodes): Add initializer for size field
2880 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2881 Add D8 for 8-bit unsigned field in short load/store insns.
2882 (IF4A, IF4D): These both need two registers.
2883 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2884 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2885 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2886 for "ldsr" and "stsr".
2887 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2890 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2891 short store word (sst.w).
2893 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2895 * v850-opc.c (v850_operands): Added insert and extract fields,
2896 pointers to functions that handle unusual operand encodings.
2898 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2900 * v850-opc.c (v850_opcodes): Enable "trap".
2902 * v850-opc.c (v850_opcodes): Fix order of displacement
2903 and register for "set1", "clr1", "not1", and "tst1".
2905 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2907 * v850-opc.c (v850_operands): Add "B3" support.
2908 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2911 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2913 * v850-opc.c: Close unterminated comment.
2915 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2917 * v850-opc.c (v850_operands): Add flags field.
2918 (v850_opcodes): add move opcodes.
2920 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2922 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2923 * configure: (bfd_v850v_arch) Add new case.
2924 * configure.in: (bfd_v850_arch) Add new case.
2925 * v850-opc.c: New file.
2927 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2929 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2931 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2933 * d10v-opc.c: Add additional information to the opcode
2934 table to help determinine which instructions can be done
2937 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2939 * mpw-make.sed: Update editing of include pathnames to be
2942 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2944 * arm-opc.h: Added "bx" instruction definition.
2946 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2948 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2950 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2952 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2954 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2956 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2958 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2960 * makefile.vms: Update for alpha-opc changes.
2962 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2964 * i386-dis.c (print_insn_i386): Actually return the correct value.
2965 (ONE, OP_ONE): #ifdef out; not used.
2967 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2969 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2970 Changed subi operand type to treat 0 as 16.
2972 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2974 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2977 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2979 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2980 memory transfer instructions. Add new format string entries %h and %s.
2981 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2984 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2986 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2987 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2989 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * alpha-dis.c (print_insn_alpha_osf): Remove.
2992 (print_insn_alpha_vms): Remove.
2993 (print_insn_alpha): Make globally visible. Chose the register
2994 names based on info->flavour.
2995 * disassemble.c: Always return print_insn_alpha for the alpha.
2997 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2999 * d10v-dis.c (dis_long): Handle unknown opcodes.
3001 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3003 * d10v-opc.c: Changes to support signed and unsigned numbers.
3004 All instructions with the same name that have long and short forms
3005 now end in ".l" or ".s". Divs added.
3006 * d10v-dis.c: Changes to support signed and unsigned numbers.
3008 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3010 * d10v-dis.c: Change all functions to use info->print_address_func.
3012 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3014 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3015 move ccr/sr insns more strict so that the disassembler only
3016 selects them when the addressing mode is data register.
3018 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3019 * d10v-opc.c (pre_defined_registers): Declare.
3020 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3021 to pick a better name for the registers.
3023 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3025 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3026 operands for fexpand and fpmerge. From Christian Kuehnke
3027 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3029 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3031 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3032 print routine. Take new regnames and cpumask arguments.
3033 Kill the environment variable nonsense.
3034 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3035 (print_insn_alpha_vms): New function. Do VMS style regnames.
3036 * disassemble.c (disassembler): Test bfd flavour to pick
3037 between OSF and VMS routines. Default to OSF.
3039 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3041 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3042 * configure: Rebuild.
3043 * Makefile.in (install): Use @INSTALL_SHLIB@.
3045 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3047 * configure: (bfd_d10v_arch) Add new case.
3048 * configure.in: (bfd_d10v_arch) Add new case.
3049 * d10v-dis.c: New file.
3050 * d10v-opc.c: New file.
3051 * disassemble.c (disassembler) Add entry for d10v.
3053 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3055 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3056 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3058 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3060 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3061 distinguish between variants of the instruction set.
3062 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3063 distinguish between variants of the instruction set.
3065 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3067 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3068 the 8086 instruction set.
3069 * i386-dis.c: General cleanups. Make most things static. Add
3070 prototypes. Get rid of static variables aflags and dflags. Pass
3071 them as args (to almost everything).
3073 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3075 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3077 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3079 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3080 if the next arg is marked with SRC_IN_DST. Gross.
3082 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3083 we're looking for and find EXR.
3085 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3086 if we're looking for KBIT and we don't find it.
3088 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3091 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3092 3bit immediate operands.
3094 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3096 * Released binutils 2.7.
3098 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3099 <kkaempf@progis.ac-net.de>.
3101 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3103 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3105 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3107 * sparc-dis.c (print_insn_sparclite): New routine to print
3108 sparclite instructions.
3110 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3112 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3114 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3116 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3117 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3118 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3120 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3122 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3123 Use autoconf-set values.
3124 (docdir, oldincludedir): Removed.
3125 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3127 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3129 * alpha-opc.c: New file.
3130 * alpha-opc.h: Remove.
3131 * alpha-dis.c: Complete rewrite to use new opcode table.
3132 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3133 * configure: Rebuild with autoconf 2.10.
3134 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3135 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3137 (alpha-opc.o): New target.
3139 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3141 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3142 Set imm_added_to_rs1 even if the source and destination register
3145 * sparc-opc.c: Add some two operand forms of the wr instruction.
3147 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3149 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3152 * disassemble.c (disassembler): Handle H8/S.
3153 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3155 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3157 * sparc-opc.c: Add beq/teq as aliases for be/te.
3159 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3160 <sergei@msil.sps.mot.com>.
3162 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3164 * makefile.vms: New file.
3166 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3168 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3170 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3173 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3175 * i386-dis.c (OP_OFF): Call append_prefix.
3177 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3179 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3180 unsigned long to silence a warning from the Solaris PowerPC
3183 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3185 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3187 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3189 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3191 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3192 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3193 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3194 cpush, cpusha, cpull sparclet insns.
3196 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3198 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3200 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3202 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3203 Set F_FLOAT on other floating point instructions.
3205 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3207 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3209 (powerpc_opcodes): Add 860/821 specific SPRs.
3211 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3213 * configure.in: Permit --enable-shared to specify a list of
3214 directories. Set and substitute BFD_PICLIST.
3215 * configure: Rebuild.
3216 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3217 uses. Set to @BFD_PICLIST@.
3219 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3221 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3222 not "abs", which may be needed for the absolute in something
3223 like btst #0,@10:8. Print L_3 immediates separately from other
3224 immediates. Change ABSMOV reference to ABS8MEM.
3226 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3228 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3229 (current_arch_mask): New static global.
3230 (compute_arch_mask): New static function.
3231 (print_insn_sparc): Delete sparc_v9_p. New static local
3232 current_mach. Resort opcode table if current_mach changes.
3233 Generalize "insn not supported" test.
3234 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3235 Delete test for v9/!v9.
3236 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3238 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3239 (brfcx): Renamed to FBRX.
3240 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3241 coprocessor mnemonics are not supported on the sparclet).
3242 (condf): Renamed to CONDF.
3243 (SLCBCC2): Delete F_ALIAS flag.
3245 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3247 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3248 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3250 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3252 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3253 that the shared library version number is set correctly.
3255 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3258 Miles Bader <miles@gnu.ai.mit.edu>.
3259 * configure: Rebuild.
3261 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3263 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3266 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * configure: Rebuild with autoconf 2.8.
3270 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3272 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3273 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3275 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3278 since they appear as targets in Makefile.in.
3279 * configure: Rebuild.
3281 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3283 * mpw-make.sed: Edit out shared library support bits.
3285 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3287 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3288 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3289 (sparc_opcodes): Add sparclet insns.
3290 (sparclet_cpreg_table): New static local.
3291 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3292 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3294 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3296 * i386-dis.c (index16): New static variable.
3297 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3299 (OP_indirE): Return result of OP_E.
3300 (OP_E): Check for 16 bit addressing mode, and disassemble
3301 correctly. Optimised 32 bit case a little. Don't print
3302 "(base,index,scale)" when sib specifies only an offset.
3304 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3306 * configure.in: Set and substitute SHLIB_DEP.
3307 * configure: Rebuild.
3308 * Makefile.in (SHLIB_DEP): New variable.
3309 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3310 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3311 COMMON_SHLIB, add them to piclist with appropriate modifications.
3312 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3313 here: just use piclist.
3315 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3317 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3318 (print_insn_sparc): Rewrite v9/not-v9 tests.
3319 (compare_opcodes): Likewise.
3320 * sparc-opc.c (MASK_<ARCH>): Define.
3321 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3322 (sparclet,v6notv9): Define.
3323 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3324 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3326 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3328 * configure.in: Call AC_PROG_CC before configure.host.
3329 * configure: Rebuild.
3331 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3333 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3335 * i386-dis.c (onebyte_has_modrm): New static array.
3336 (twobyte_has_modrm): New static array.
3337 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3339 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3341 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3344 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3346 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3349 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3352 m68010up, not just m68020up | cpu32.
3354 * Makefile.in (SONAME): New variable.
3355 ($(SHLINK)): Make a link to the transformed name, as well.
3356 (stamp-tshlink): New target.
3357 (install): Skip stamp-tshlink during install.
3359 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3361 * configure.in: Call AC_ARG_PROGRAM.
3362 * configure: Rebuild.
3363 * Makefile.in (program_transform_name): New variable.
3364 (install): Transform library name before installing it.
3366 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3368 * i960-dis.c (mem): Add HX dcinva instruction.
3370 Support for building as a shared library, based on patches from
3371 Alan Modra <alan@spri.levels.unisa.edu.au>:
3372 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3373 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3374 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3375 * configure: Rebuild.
3376 * Makefile.in (ALLLIBS): New variable.
3377 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3378 (COMMON_SHLIB, SHLINK): New variables.
3379 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3380 (STAGESTUFF): Remove variable.
3381 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3382 (stamp-piclist, piclist): New targets.
3383 ($(SHLIB), $(SHLINK)): New targets.
3384 ($(OFILES)): Depend upon stamp-picdir.
3385 (disassemble.o): Build twice if PICFLAG is set.
3386 (MOSTLYCLEAN): Add pic/*.o.
3387 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3388 (distclean): Remove pic and stamp-picdir.
3389 (install): Install shared libraries.
3390 (stamp-picdir): New target.
3392 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3394 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3395 Print unknown instruction as "unknown", rather than in hex.
3397 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3399 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3401 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3403 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3405 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3407 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3408 when necessary. From Ulrich Drepper
3409 <drepper@myware.rz.uni-karlsruhe.de>.
3411 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3413 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3414 sparc_num_opcodes. Update architecture enum values.
3415 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3416 (sparc_opcode_lookup_arch): New function.
3417 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3418 (sparc_opcodes): Add v9a shutdown insn.
3420 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3422 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3423 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3425 (print_insn_sparc64): Deleted.
3426 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3429 * sparc-opc.c (architecture_pname): Add v9a.
3431 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3433 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3434 incorrectly defined as 0x16 when it should be 0x15.
3435 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3436 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3437 excb (exception barrier) which is defined in the Alpha
3438 Architecture Handbook version 2.
3439 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3440 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3441 disassembled as or, for example.
3443 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3445 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3446 (_print_insn_mips): Change i from int to unsigned int.
3448 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3450 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3451 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3453 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3455 * i386-dis.c: Added Pentium Pro instructions.
3457 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3459 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3462 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3464 * sh-opc.h (sh_nibble_type): Added REG_B.
3465 (sh_arg_type): Added A_REG_B.
3466 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3468 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3470 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3472 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3474 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3476 * Makefile.in (distclean): Remove stamp-h. From Ronald
3477 F. Guilmette <rfg@monkeys.com>.
3479 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3481 From David Mosberger-Tang <davidm@azstarnet.com>:
3482 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3485 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3487 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3488 (sh_table): Added many SH3 opcodes.
3489 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3491 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3493 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3494 (subco,subco.): Mark this PPC, not PPCCOM.
3496 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3498 * configure: Rebuild with autoconf 2.7.
3500 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3502 * configure: Rebuild with autoconf 2.6.
3504 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3506 * configure.in: Sort list of architectures. Accept but do nothing
3507 for alliant, convex, pyramid, romp, and tahoe.
3509 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3511 * a29k-dis.c (print_special): Change num to unsigned int.
3513 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3515 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3518 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3520 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3521 * configure: Rebuilt.
3523 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3525 * configure.in: Add case for bfd_i860_arch.
3526 * configure: Rebuild.
3528 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3530 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3531 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3532 (NEXTDOUBLE): Likewise.
3533 (print_insn_m68k): Don't match fmoveml if there is more than one
3534 register in the list.
3535 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3537 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3539 * m68k-opc.c: Use #W rather than #w.
3540 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3542 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3544 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3545 and likewise for all the dbxx opcodes.
3547 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3549 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3551 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3553 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3554 the VR4100 specific instructions to the mips_opcodes structure.
3556 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3558 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3559 ugly Metrowerks bug in CW6, is fixed in CW7.
3561 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3563 * ppc-opc.c (whole file): Add flags for common/any support.
3565 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3567 * Makefile.in (BISON): Remove macro.
3568 (FLAGS_TO_PASS): Remove BISON.
3570 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3572 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3574 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3575 instructions that take no args by looking at the match mask.
3576 (print_insn_arg): Always print "%" before register names.
3577 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3578 [case '_']: Don't print "@#" before address.
3579 [case 'J']: Use "%s" as format string, not register name.
3580 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3582 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3584 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3587 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3589 From David Mosberger-Tang <davidm@azstarnet.com>
3591 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3592 (alpha_insn_set): added definitions for VAX floating point
3593 instructions (Unix compilers don't generate these, but handcoded
3594 assembly might still use them).
3596 * alpha-dis.c (print_insn_alpha): added support for disassembling
3597 the miscellaneous instructions in the Alpha instruction set.
3599 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3601 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3602 no longer create sysdep.h, sed ppc-opc.c to work around a
3603 serious Metrowerks C bug.
3604 * mpw-make.in: Remove.
3605 * mpw-make.sed: New file, used by mpw-configure to edit
3606 Makefile.in into an MPW makefile.
3608 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3610 * Makefile.in (maintainer-clean): New synonym for realclean.
3612 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3614 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3615 which use '0', '1', and '2' instead. Specify the proper size for
3616 a pmove immediate operand. Correct the pmovefd patterns to be
3617 moves to a register, not from a register.
3618 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3620 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3622 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3623 %psr, %wim, %tbr as F_NOTV9.
3625 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3627 * Makefile.in (Makefile): Just rebuild Makefile when running
3629 (config.h, stamp-h): New targets.
3630 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3631 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3632 rebuilding config.h.
3633 * configure: Rebuild.
3635 * mips-opc.c: Change unaligned loads and stores with "t,A"
3636 operands to use "t,A(b)".
3638 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3640 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3642 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3644 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3645 until 3 instead of until 2.
3647 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3649 * Makefile.in (ALL_CFLAGS): Define.
3650 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3651 (MOSTLYCLEAN): Add config.log.
3652 (distclean): Don't remove config.log.
3653 * configure.in: Substitute HDEFINES.
3654 * configure: Rebuild.
3656 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3658 * sh-opc.h (sh_arg_type): Add F_FR0.
3659 (sh_table, case fmac): Add F_FR0 as first argument.
3661 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3663 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3665 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3667 * sparc-dis.c: Remove all references to NO_V9.
3669 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3671 * aclocal.m4: Just include ../bfd/aclocal.m4.
3672 * configure: Rebuild.
3674 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3676 * sparc-dis.c (X_DISP19): Define.
3677 (print_insn, case 'G'): Use it.
3678 (print_insn, case 'L'): Sign extend displacement.
3680 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3682 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3683 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3684 host_makefile_frag or frags.
3685 * aclocal.m4: New file.
3686 * configure: Rebuild.
3687 * Makefile.in (INSTALL): Set to @INSTALL@.
3688 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3689 (INSTALL_DATA): Set to @INSTALL_DATA@.
3691 (AR_FLAGS): Set to rc rather than qc.
3692 (CC): Define as @CC@.
3693 (CFLAGS): Set to @CFLAGS@.
3694 (@host_makefile_frag@): Remove.
3695 (config.status): Remove dependency upon @frags@.
3697 * configure.in: ../bfd/config.bfd now just sets shell variables.
3698 Use them rather than looking through target Makefile fragments.
3699 * configure: Rebuild.
3701 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3703 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3705 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3707 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3708 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3711 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3712 (lookup_{name,value}): New functions.
3713 (prefetch_table): New static local.
3714 (sparc_{encode,decode}_prefetch): New functions.
3715 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3717 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3719 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3722 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3724 * sh-dis.c: Correct comment on first line of file.
3726 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3728 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3730 * sparc-opc.c (asi, membar): New static locals.
3731 (sparc_{encode,decode}_{asi,membar}): New functions.
3732 (sparc_opcodes, membar insn): Fix.
3733 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3734 Support decoding of membar masks.
3737 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3739 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3741 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3743 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3744 and likewise for the other branches. Add bhs as an alias for bcc,
3745 and likewise for the size variants. Add dbhs as an alias for
3748 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3750 * sh-opc.h (FP sts instructions): Update to match reality.
3752 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3754 * m68k-dis.c: (fpcr_names): Add % before all register names.
3755 (reg_names): Likewise.
3756 (print_insn_arg): Don't explicitly print % before register names.
3757 Add % before register names in static array names. In case 'r',
3758 print data registers as `@(Dn)', not `Dn@'. When printing a
3759 memory address, don't print @# before it.
3760 (print_indexed): Change base_disp and outer_disp from int to
3761 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3762 syntax. Sign extend 8 byte displacement correctly.
3763 (print_base): Print using MIT syntax. Print zpc when appropriate.
3764 Change parameter disp from int to bfd_vma.
3766 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3769 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3771 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3772 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3773 * sh-opc.h (sh_arg_type): Add new operand types.
3774 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3776 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3778 * Makefile.in (distclean): Remove generated file config.h.
3780 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3782 * Makefile.in (distclean): Remove generated file config.h.
3784 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3786 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3788 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3790 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3791 rather than numopcodes. Use m68k_opcodes rather than removed
3792 opcode function. Don't check F_ALIAS.
3793 (print_insn_arg): Change first parameter to be const char *.
3794 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3795 (m68k-opc.o): New target.
3796 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3797 * configure: Rebuild.
3799 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3801 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3802 (opcode_bits, opcode_hash_table): New variables.
3803 (opcodes_initialized): Renamed from opcodes_sorted.
3804 (build_hash_table): New function.
3805 (is_delayed_branch): Use hash table.
3806 (print_insn): Renamed from print_insn_sparc, made static.
3807 Build and use hash table. If !sparc64, ignore sparc64 insns,
3808 and vice-versa if sparc64.
3809 (print_insn_sparc, print_insn_sparc64): New functions.
3810 (compare_opcodes): Move sparc64 opcodes to end.
3811 Print commutative insns with constant second.
3812 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3814 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3816 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3817 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3818 avoids printing a delay slot in a delay slot.
3819 * sh-opc.h (sh_table): Fully bracket last entry.
3821 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3823 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3825 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3827 * configure.in: Get host_makefile_frag from ${srcdir}.
3829 * configure.in: Autoconfiscated. Check for string[s].h. Create
3830 config.h from config.in. Don't set up sysdep.h link.
3831 * sysdep.h: New file.
3832 * configure, config.in: New files, generated from configure.in.
3833 * Makefile.in: Updated to be processed autoconf-style.
3834 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3835 (Makefile): Depend on config.status.
3836 (config.status): New rule.
3837 * configure.bat: Update Makefile substitutions.
3839 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3841 * mips-opc.c (L1): Define.
3842 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3843 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3846 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3848 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3849 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3850 have multiple add units but only a single logical unit.
3852 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3853 shifted by 18, without any insertion or extraction function.
3854 (insert_cr, extract_cr): Remove.
3856 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3858 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3861 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3863 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3864 * sh-opc.h: Add copyright.
3866 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3868 * Makefile.in (crunch-m68k): Delete extra target accidentally
3869 checked in a while ago.
3871 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3873 * sh-opc.h (sh_table): Add SH3 support.
3875 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3877 * sh-opc.h: Added bsrf and braf.
3879 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3881 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3882 bogus [ls]fm{ea,fd} patterns.
3884 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3885 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3886 initialize it from memory. Make function static.
3887 (print_insn_{big,little}_arm): New functions.
3888 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3889 the correct endianness.
3891 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3893 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3896 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3898 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3899 17th, so that it builds again using GCC as the compiler.
3901 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3903 * mips-dis.c (print_insn_little_mips): Cast return value from
3904 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3905 expects an unsigned long, and that might be fewer words of
3906 argument storage (e.g., if bfd_vma is long long on a 32-bit
3908 (print_insn_big_mips): Likewise with bfd_getb32 value.
3909 (_print_insn_mips): Now static.
3911 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3913 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3914 gcc memory hog problem with initializer is fixed.
3916 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3918 Merge in support for Mac MPW as a host.
3919 (Old change descriptions retained for informational value.)
3921 * mpw-config.in (archname): Compute from the config.
3922 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3924 * mpw-config.in (target_arch): Compute from canonical target.
3925 (m68k, mips, powerpc, sparc): Add architectures.
3926 * mpw-make.in (disassemble.c.o): Add.
3927 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3929 * mpw-config.in (BFD_MACHINES): Set to a default value.
3930 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3932 * mpw-make.in (CSEARCH): Add extra-include to search path.
3934 * mpw-config.in (varargs.h): Don't create.
3935 (sysdep.h): Create using forward-include.
3936 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3938 * mpw-config.in: New file, MPW version of configure.in.
3939 * mpw-make.in: New file, MPW version of Makefile.in.
3941 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3943 * alpha-dis.c (print_insn_alpha): Put empty statement after
3946 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3948 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3949 (low_sign_extend): Likewise.
3950 (get_field): Delete unused function.
3951 (set_field, deposit_14, deposit_21): Likewise.
3953 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3955 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3958 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3960 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3962 * alpha-opc.h (OSF_ASMCODE): define
3963 print pal-code names as defined in App C of the
3964 Alpha Architecture Reference Manual
3966 * alpha-dis.c: cleaned up output
3967 print stylized code forms as defined in App A.4.3 of the
3968 Alpha Architecture Reference Manual
3970 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3972 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3974 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3977 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3979 * m68k-dis.c (opcode): New function. Returns address of opcode
3980 table entry given index, even if the opcode table was split to
3981 work around gcc bugs.
3982 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3984 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3985 (reg_names): Now const.
3986 (print_insn_arg): Arrays cacheFieldName and names now const.
3987 (print_indexed): Array scales now const.
3989 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * ppc-opc.c: Sort recently added instructions by minor opcode
3992 number within major opcode number.
3994 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3996 * hppa-dis.c: Include libhppa.h.
3998 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4000 * mips-opc.c: Change dli to use M_DLI, and add dla.
4002 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4004 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4006 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * mips-opc.c: Add r4650 mul instruction.
4010 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4012 * mips-opc.c: Add uld and usd macros for unaligned double load and
4015 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4017 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4018 mfdcr, mtdcr, icbt, iccci.
4020 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4022 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4023 signed char fields to shorts, more portable.
4025 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4027 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4028 char fields as signed chars, since they may have negative values.
4030 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4032 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4033 (mycroft@netbsd.org).
4035 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4037 From "Logg, Ed" <elogg@ea.com>:
4038 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4039 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4042 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * ppc-opc.c: Changes based on patch from David Edelsohn
4045 <edelsohn@mhpcc.edu>.
4046 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4049 (insert_tbr): New static function.
4050 (extract_tbr): New static function.
4051 (XFXFXM_MASK, XFXM): Define.
4052 (XSPRBAT_MASK, XSPRG_MASK): Define.
4053 (powerpc_opcodes): Add instructions to access special registers by
4054 name. Add mtcr and mftbu.
4056 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4058 * mips-opc.c (P3): Define.
4059 (mips_opcodes): Add mad and madu.
4061 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4063 * configure.in: Add W65 support.
4064 * disassemble.c: Likewise.
4065 * w65-opc.h, w65-dis.c: New files.
4067 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4069 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4072 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4074 * mips-opc.c: Add dli as a synonym for li.
4076 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4078 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4079 print something for reserved opcode values, even if it won't
4082 * mips-dis.c (_print_insn_mips): When initializing, shift right
4083 and mask, to avoid sign extension problems on the Alpha.
4085 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4088 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4090 * sh-opc.h (mov.l gbr): Get direction right.
4091 * sh-dis.c (print_insn_shx): New function.
4092 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4093 print opcodes with right byte order.
4095 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4097 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4098 to avoid conflicts with getopt.
4100 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4102 * hppa-dis.c (print_insn_hppa): Read the instruction using
4103 bfd_getb32, so that it works on a little endian or 64 bit host.
4104 Remove unused local variable op.
4106 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4108 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4109 addu does not work correctly if -mips3.
4111 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4113 * a29k-dis.c (print_special): Add special register names defined
4114 on 29030, 29040 and 29050.
4115 (print_insn): Handle new operand type 'I'.
4117 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4119 * Makefile.in (INSTALL): Use top level install.sh script.
4121 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4123 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4124 that it works on a little endian host.
4126 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4128 * configure.in: Use ${config_shell} when running config.bfd.
4130 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4132 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4134 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4136 * a29k-dis.c (print_insn): Print the opcode.
4138 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4140 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4142 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4144 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4146 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4148 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4149 which store a value into memory.
4151 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4153 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4154 * arm-dis.c, arm-opc.h: New files.
4156 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4158 * Makefile.in (ns32k-dis.o): Add dependency.
4159 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4160 string, not as array of chars.
4162 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4164 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4166 * sparc-opc.c: Added sparclite extended FP operations, and
4167 versions of v9 impdep* instructions permitting specification of
4170 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4172 * i960-dis.c (reg_names): Now const.
4173 (struct sparse_tabent): New type, copied from array type in mem
4175 (ctrl): Local static array ctrl_tab now const.
4176 (cobr): Local static array cobr_tab now const.
4177 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4178 static variable mem_tab no longer explicitly initialized. Changed
4179 mem_init to const array of struct sparse_tabent.
4180 (reg): Local static variable reg_tab no longer explicitly
4181 initialized. Changed reg_init to const array of struct
4183 (ea): Local static array scale_tab now const.
4185 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4188 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4190 * configure.bat: the disassember needs to be enabled for
4191 "objdump -d" to work in djgpp.
4193 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4195 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4196 (invalid_float): Enabled general version, doesn't require running
4197 on ns32k host. Changed to take char* argument, and test for
4198 explicitly specified sizes, instead of using sizeof() on host CPU
4200 (INVALID_FLOAT): Cast first argument.
4201 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4202 list_P032, list_M032): Now const.
4203 (optlist, list_search): Made appropriate arguments now point to
4205 (print_insn_arg): Changed static array of one-character-string
4206 pointers into a static const array of characters; fixed sprintf
4207 statement accordingly.
4209 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4211 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4212 from distribution. A ns32k-dis.c from a previous distribution has
4213 been brought up to date and supports the new interface.
4215 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4217 * configure.in: add bfd_ns32k_arch target support.
4219 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4220 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4222 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4224 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4227 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4229 * h8300-dis.c, mips-dis.c: Don't use true and false.
4231 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4233 * configure.in: Change --with-targets to --enable-targets.
4235 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4237 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4238 opcodes to the first instruction with that opcode, to speed
4239 disassembly of large files. From ralphc@pyramid.com (Ralph
4242 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4244 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4246 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4248 * configure.bat: update to latest makefile.in
4250 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4252 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4253 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4254 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4255 slot insn is in a delay slot.
4256 * z8k-opc.h: (resflg): Fix patterns.
4257 * h8500-opc.h Fix CR insn patterns.
4259 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4261 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4262 "cmpl" before POWER versions, so that gas -many uses them.
4264 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4266 * disassemble.c: New file.
4267 * Makefile.in (OFILES): Add disassemble.o.
4268 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4269 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4270 binutils/configure.in.
4272 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4273 opcode being examined.
4275 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4277 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4278 (insert_ral, insert_ram, insert_ras): New functions.
4279 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4280 RAS for store with update.
4282 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4284 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4285 (edelsohn@npac.syr.edu).
4287 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4289 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4292 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4294 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4296 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4298 * ppc-opc.c (powerpc_operands): The signedp field has been
4299 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4300 instead. Add new operand SISIGNOPT.
4301 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4302 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4303 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4306 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4308 * i386-dis.c (struct private): Renamed to dis_private. `private'
4309 is a reserved word for dynix cc.
4311 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4313 * configure.in: Change error message to refer to bfd/config.bfd
4314 rather than bfd/configure.in.
4316 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4318 * ppc-opc.c: Define POWER2 as short alias flag.
4319 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4322 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4324 * i960-dis.c (print_insn_i960): Don't read a second word for
4325 opcodes 0, 1, 2 and 3.
4327 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4329 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4331 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4333 * m68881-ext.c: Removed; no longer used.
4334 * Makefile.in: Changed accordingly.
4336 * m68k-dis.c (ext_format_68881): Don't declare.
4337 (print_insn_m68k): If an instruction uses place 'i', it uses at
4338 least four fixed bytes.
4339 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4340 extended float, convert to double using floatformat_to_double, not
4341 ieee_extended_to_double, and fetch the data before converting it.
4343 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4345 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4346 davidj@ICSI.Berkeley.EDU (David Johnson).
4348 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4350 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4351 PowerPC uses bdnz[l][a].
4353 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4355 * dis-buf.c, i386-dis.c: Include sysdep.h.
4357 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4359 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4361 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4362 by Motorola PowerPC 601 with PPC_OPCODE_601.
4363 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4364 Disassemble Motorola PowerPC 601 instructions as well as normal
4365 PowerPC instructions.
4367 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4369 * i960-dis.c (reg, mem): Just use a static array instead of
4372 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4374 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4375 condition name index if this is for a negated condition.
4377 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4378 Floating point format for 'H' operand is backwards from normal
4379 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4380 operands (fmpyadd and fmpysub), handle bizarre register
4381 translation correctly for single precision format.
4383 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4384 or 'I' operands if the next format specifier is 'M' (fcmp
4385 condition completer).
4387 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4389 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4390 single number giving a bitmask for the MB and ME fields of an M
4391 form instruction. Change NB to accept 32, and turn it into 0;
4392 also turn 0 into 32 when disassembling. Seperated SH from NB.
4393 (insert_mbe, extract_mbe): New functions.
4394 (insert_nb, extract_nb): New functions.
4395 (SC_MASK): Mask out SA and LK bits.
4396 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4397 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4398 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4399 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4400 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4401 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4402 (powerpc_macros): Define table of macro definitions.
4403 (powerpc_num_macros): Define.
4405 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4406 if PPC_OPERAND_NEXT is set.
4408 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4410 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4411 char. Retrieve contents using bfd_getl32 instead of shifting.
4413 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4415 * ppc-opc.c: New file. Opcode table for PowerPC, including
4416 opcodes for POWER (RS/6000).
4417 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4418 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4419 (CFILES): Add ppc-dis.c.
4420 (ppc-dis.o, ppc-opc.o): New targets.
4421 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4423 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4425 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4426 No space before 'u', 'f', or 'N'.
4428 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4430 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4431 farther than we should.
4433 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4435 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4437 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4439 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4441 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4442 needs it, to prevent reading past the end of a section.
4444 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4446 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4447 Removed t,A case for la; always use t,A(b) case.
4449 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4451 From Ted Lemen <mellon@pepper.ncd.com>
4452 * mips-dis.c (print_insn_arg): Handle 'k'.
4453 * mips-opc.c: Make cache use k, not t.
4455 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4457 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4458 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4459 FLOAT_FORMAT_CODE to put out floating point register names.
4461 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4465 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4467 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4469 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4471 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4472 larger than 32. Moved dsxx32 variants first for disassembler.
4474 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4476 * z8kgen.c, z8k-opc.h: Add full lda information.
4478 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4480 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4481 movb instructions. Any necessary space will be emitted by
4482 the code to handle nullification completers.
4484 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4486 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4488 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4490 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4491 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4493 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4497 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4499 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4500 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4502 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4504 * m88k-dis.c (m88kdis): comment change. Remove space after
4506 (printop): handle new arg types DEC and XREG for m88110.
4508 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4510 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4511 type for absolute branch addresses. Delete special
4512 "ble" and "be" code in 'W' operand code.
4514 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4516 * mips-opc.c: Set hazard information correctly for branch
4517 likely instructions.
4519 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4521 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4522 info->fprintf_func for printing and info->print_address_func for
4525 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4529 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4532 Corrected second case of "b" for disassembler.
4534 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4536 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4537 to BFD swapping routines to correspond to BFD name changes.
4539 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4541 * mips-opc.c: Change div machine instruction to be z,s,t rather
4542 than s,t. Change div macro to be d,v,t rather than d,s,t.
4543 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4544 rem and remu which generates only the corresponding div
4545 instruction. This is for compatibility with the MIPS assembler,
4546 which only generates the simple machine instruction when an
4547 explicit destination of $0 is used.
4548 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4550 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4553 WR_31 hazard for bal, bgezal, bltzal.
4555 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4557 * hppa-dis.c (print_insn_hppa): Use print function
4558 from within the disassemble_info, not fprintf_filtered.
4560 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4562 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4563 Law, law@cs.utah.edu.)
4565 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.c ("absu"): Removed.
4570 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4572 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4573 Changed hazard information to distinguish between memory load
4574 delays and coprocessor load delays.
4576 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4578 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4580 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4582 * configure.in: Don't pass cpu to config.bfd.
4584 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4586 * m88k-dis.c (m88kdis): Make class unsigned.
4588 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4590 * alpha-dis.c (print_insn_alpha): One branch format case was
4591 missing the instruction name.
4593 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4595 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4596 Add the arch-specific auxiliary files.
4597 (OFILES): Remove the arch-specific auxiliary files
4598 and use BFD_MACHINES instead of DIS_LIBS.
4599 * configure.in: Set BFD_MACHINES based on --with-targets option.
4601 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4603 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4606 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4608 * sparc-opc.c: Change CONST to const to deal with gcc
4609 -Dconst=__const -traditional.
4611 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4614 coprocessor instructions out of #if 0, and made them use new
4617 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4619 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4621 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4623 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4624 instruction, for use by the disassembler.
4626 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4627 hand-coded sign extensions that depended on 32-bit host ints.
4628 FIXME, we still depend on big-endian host bitfield ordering.
4629 (sparc_print_insn): Set the insn_info_valid field, and the
4630 other fields that describe the instruction being printed.
4632 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4634 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4635 `jmp' instead of just one of them.
4637 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4639 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4640 (fput_fp_reg_r): Renamed from fput_reg_r.
4641 (fput_fp_reg): New function.
4642 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4644 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4646 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4648 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4650 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4652 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4653 don't output a space.
4655 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4657 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4659 * mips-opc.c: New file, containing opcode table from
4660 ../include/opcode/mips.h.
4661 * Makefile.in: Add it.
4663 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * m88k-dis.c: New file, moved in from gdb and changed to use the
4666 new dis-asm.h disassembler interface.
4667 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4668 (m88k-dis.o): New target.
4670 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4672 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4673 argument string const char * to correspond to opcode/mips.h.
4675 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4677 * mips-dis.c: Updated to account for name changes in new version
4679 * Makefile.in: Added header file dependencies.
4681 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4683 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4685 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4687 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4688 extend, rather than shifts.
4690 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4692 * Makefile.in: Undo 15 June change.
4694 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4696 * m68k-dis.c (print_insn_arg): Change return value to byte count
4698 * m68k-dis.c: Re-write to detect invalid operands before
4699 printing anything, so we can handle this the same way we
4700 handle invalid opcodes.
4702 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4704 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4706 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4708 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4711 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4713 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4715 * configure.in: Do make sysdep.h link.
4716 * Makefile.in: Search ../include. Don't search ../bfd.
4718 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4720 Changes from Jeff Law, law@cs.utah.edu:
4721 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4722 Do not print a space before the completers specified by
4725 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4727 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4728 defined, since gdb has been fixed.
4730 Changes from Jeff Law, law@cs.utah.edu:
4731 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4732 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4733 be a *disassemble_info, not a *FILE.
4734 * hppa-dis.c: Support 'd', '!', and 'a'.
4735 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4736 * hppa-dis.c: Delete cases which are no longer needed.
4738 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4740 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4742 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4744 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4747 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4749 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4750 * configure.in: No longer need to configure to get sysdep.h.
4752 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4754 * Patches from Jeffrey Law <law@cs.utah.edu>.
4755 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4756 templates for 1.1 FP computational instructions.
4758 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4760 * h8500-dis.c (print_insn_h8500): Address argument is type
4762 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4765 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4766 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4768 * sparc-dis.c (compare_opcodes): Move static declaration to
4771 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4773 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4774 instruction, remove unimp hack from 'l' argument.
4776 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4778 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4781 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4783 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4784 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4787 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4789 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4790 arrays of string pointers to 2-d arrays of chars, to save
4793 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4795 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4796 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4798 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4800 * hppa-dis.c: New file from Utah, adapted to new disassembler
4802 * Makefile.in: Include it.
4804 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4806 * sh-dis.c, sh-opc.h: New files.
4808 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4810 * alpha-dis.c, alpha-opc.h: New files.
4812 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4814 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4817 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4819 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4821 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4823 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4826 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4828 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4829 and double percent signs a few places.
4831 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4833 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4834 Use info->print_address_func not print_address.
4836 * dis-buf.c (generic_print_address): New function.
4838 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4840 * Makefile.in: Add sparc-dis.c.
4841 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4843 Add `add' instruction to the set that get checked
4844 for a preceding `sethi' in order to print an absolute address.
4845 * (print_insn): Disassembly prefers real instructions.
4846 (is_delayed_branch): Speed up.
4847 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4848 Still missing some float ops, and needs testing.
4849 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4850 F_ALIAS. Use printf, not fprintf, when not passing a file
4852 (compare_opcodes): Check that identical instructions have
4853 identical opcodes, complain otherwise.
4856 * Include reg_names.
4858 Use dis-asm.h/read_memory_func interface.
4860 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4862 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4863 deliberately return non-zero to setjmp from longjmp. Otherwise
4864 this code fails to compile.
4866 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4868 * m68k-dis.c: Fix prototype for fetch_arg().
4870 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4872 * dis-buf.c: New file, for new read_memory_func interface.
4873 Makefile.in (OFILES): Include it.
4874 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4875 Use new read_memory_func interface.
4877 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4879 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4880 * h8500-opc.h: Fix couple of opcodes.
4882 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4884 * Makefile.in: add dvi & installcheck targets
4886 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4888 * Makefile.in: Update for h8500-dis.c.
4890 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4892 * h8500-dis.c, h8500-opc.h: New files
4894 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4896 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4897 ../include/dis-asm.h.
4898 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4899 and ../gdb/m68k-pinsn.c).
4900 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4901 and ../gdb/i386-pinsn.c).
4902 * m68881-ext.c: New file. Moved definition of
4903 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4904 * Makefile.in: Adjust for new files.
4905 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4906 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4907 can be dis-assembled.
4909 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4911 * mips-dis.c (print_insn_arg): Now returns void.
4913 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4915 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4916 files that use the macros.
4918 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4920 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4921 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4922 (CFILES): Added mips-dis.c.
4924 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4926 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4927 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4929 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4931 * Makefile.in: Improve *clean rules.
4932 * configure.in: Allow a default host.
4934 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4936 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4937 files include other sysdep files
4939 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4941 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4943 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4945 * configure.in: For host support, use ../bfd/configure.host
4946 so it stays in sync with the ../bfd/hosts database.
4948 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4950 * configure.in: use cpu-vendor-os triple instead of nested cases
4952 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4954 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4955 *always* the wrong one.
4957 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4959 * z8kgen.c: added copyright info
4961 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4963 * z8k-dis.c (unparse_instr): prettier tabs
4964 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4966 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4968 * configure.in: Add ncr* configuration.
4969 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4970 picayune ANSI compilers happy.
4972 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4974 * configure.in (i386): Make i386 and i486 synonymous for now.
4975 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4977 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4979 * Makefile.in (install): Fix typo.
4981 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4983 * Makefile.in (make): Remove obsolete crud.
4984 (sparc-opc.o): Avoid Sun Make VPATH bug.
4986 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4988 * Makefile.in: since there are no SUBDIRS, remove rule and
4989 references of subdir_do.
4991 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4993 * Makefile.in (install): Get the library name right here too.
4994 Don't install bfd.h, since it's unrelated to this library. No
4995 subdirs to recurse into, either.
4996 (CFILES): The source file has a .c suffix, not .o.
4998 * sparc-opc.c: New file, moved from BFD.
4999 * Makefile.in (OFILES): Build it.
5001 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5003 * z8k-dis.c: fixed forward refferences of some declarations.
5005 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5007 * Makefile.in: get the name of the library right
5009 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5011 * z8k-dis.c: knows how to disassemble z8k stuff
5012 * z8k-opc.h: new file full of z8000 opcodes
5016 version-control: never
projects / platform / upstream / binutils.git / blob