2 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
4 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
8 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
10 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
12 Added VR5400 instructions.
13 (N5): New cpu-id macro.
15 (WR_HILO, RD_HILO, MOD_HILO): New macros.
17 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
19 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
20 (WR_HILO, RD_HILO, MOD_HILO): New macros.
22 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
24 * v850-dis.c (disassemble): Replace // with /* ... */
26 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
28 * sparc-opc.c: Add wr & rd for v9a asr's.
29 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
30 (v9a_asr_reg_names): New variable.
31 Patch from David Miller <davem@vger.rutgers.edu>.
33 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
35 * sparc-opc.c (v9notv9a): New insn type.
36 (IMPDEP): Move to the end to not conflict with edge8 et al.
37 Patch from David Miller <davem@vger.rutgers.edu>.
39 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
41 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
43 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
45 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
47 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
49 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
50 of disassemble_info structure to determine if an overlay address
51 has a matching symbol in low memory.
53 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
54 new symbol_at_address_func field in disassemble_info structure.
56 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
58 * v850-opc.c (extract_d22): Use signed arithmatic.
60 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
62 * mips-opc.c: Three op mult is not an ISA insn.
64 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
66 * mips-opc.c: Fix formatting.
68 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
70 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
71 than assuming that char is signed. Explicitly sign extend 16 bit
72 values, rather than assuming that short is 16 bits.
73 (OP_sI, OP_J, OP_DIR): Likewise.
76 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
78 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
82 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
84 * v850-opc.c: Fix typo in comment.
86 * v850-dis.c (disassemble): Add test of processor type when
89 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
91 * configure.in: Use a diversion to set enable_shared before the
95 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
97 * m68k-opc.c (TBL1): Use ! rather than `.
98 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
100 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
102 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
104 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
106 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
109 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
110 * aclocal.m4: Rebuild with new libtool.
111 * configure: Rebuild.
114 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
116 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
119 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
121 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
123 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
125 * v850-opc.c (v850_opcodes): Further rearrangements.
128 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
130 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
133 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
135 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
138 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
140 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
142 * mips16-opc.c: Added mips16 sdbbp.
145 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
147 * v850-opc.c: Initialise processors field of v850_opcode structure.
150 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
152 Merge changes from Martin Hunt:
154 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
156 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
157 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
158 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
160 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
162 * d30v-dis.c (print_insn): First operand of d*i (delayed
163 branch) instructions is relative.
165 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
166 (d30v_operand_table): Add IMM6S3 type.
167 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
169 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
170 and cmp instructions.
172 * d30v-opc.c: Correct entries for repeat*, and sat*.
173 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
174 types. Correct several formats.
176 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
178 * d30v-opc.c (pre_defined_registers): Change control registers.
180 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
181 SHORT_C2. Manual was incorrect.
183 * d30v-dis.c (lookup_opcode): Return value now indicates
184 if an opcode has a short and a long form. Used for deciding
185 to append a ".s" or ".l".
186 (print_insn): Append a ".s" to an instruction if it is
187 the short form and ".l" if it is a long form. Do not append
188 anything if the instruction has only one possible size.
190 * d30v-opc.c: Change mulx2h to require an even register.
191 New form: SHORT_A2; a SHORT_A form that needs an even
192 register as the first operand.
194 * d30v-dis.c (print_insn_d30v): Fix problem where the last
195 instruction was not being disassembled if there were an odd
196 number of instructions.
198 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
202 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
204 * v850-dis.c (disassemble): Improved display of register lists.
207 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
209 * sparc-opc.c (sparc_opcodes): Fix assembler args to
210 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
211 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
212 fandnot1s, fandnot2s.
214 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
216 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
218 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
220 * cgen-asm.c (cgen_parse_address): New argument resultp.
222 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
224 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
226 * mn10200-dis.c (disassemble): PC relative instructions are
227 relative to the next instruction, not the current instruction.
229 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
231 * v850-dis.c (disassemble): Only signed extend values that are not
232 returned by extract functions.
233 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
235 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
237 * v850-opc.c: Update comments. Remove use of
238 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
240 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
242 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
244 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
246 * configure: Rebuilt with latest devo autoconf for NT support.
248 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
250 * v850-dis.c (disassemble): Use curly brace syntax for register
253 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
254 where r0 is being used as a destination register.
257 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
259 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
263 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
265 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
266 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
267 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
268 Add insns to access SGR and DBR.
269 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
272 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
274 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
277 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
279 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
280 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
283 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
285 * configure (cgen_files): Add support for v850e target.
286 * configure.in (cgen_files): Add support for v850e target.
288 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
290 * configure (cgen_files): Add support for v850eq target.
291 * configure.in (cgen_files): Add support for v850eq target.
294 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
296 * configure.in (bfd_arc_arch): Add.
297 * configure: Rebuild.
298 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
299 * Makefile.in: Rebuild.
300 * arc-dis.c, arc-opc.c: New files.
301 * disassemble.c (ARCH_all): Define ARCH_arc.
302 (disassembler): Add ARC support.
304 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
307 * v850-dis.c (disassemble): Add support for v850EQ instructions.
309 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
310 (v850_opcodes): Add v850EQ instructions.
312 * v850-dis.c (disassemble): Add support for v850E instructions.
314 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
315 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
316 insert_spe, extract_spe): New Functions.
317 (v850_opcodes): Add v850E instructions.
320 * v850-opc.c: Reorganised and re-layed out to improve readability
323 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
325 * configure: Rebuild with autoconf 2.12.1.
327 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
329 * aclocal.m4, configure: Rebuild with new automake patches.
331 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
333 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
334 * acinclude.m4: Just include acinclude.m4 from BFD.
335 * aclocal.m4, configure: Rebuild.
337 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
339 * Makefile.am: New file, based on old Makefile.in.
340 * acconfig.h: New file.
341 * acinclude.m4: New file.
342 * stamp-h.in: New file.
343 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
344 Removed shared library handling; now handled by libtool. Replace
345 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
346 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
347 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
348 handling in AC_OUTPUT.
349 * dep-in.sed: Change .o to .lo.
350 * Makefile.in: Now built with automake.
351 * aclocal.m4: Now built with aclocal.
352 * config.in, configure: Rebuild.
354 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
356 * mips-opc.c: Fix typo/thinko in "eret" instruction.
359 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
361 * mips-opc.c: Fix coding of mtsa.
364 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
366 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
368 * sparc-dis.c (sorted_opcodes): New static local.
369 (struct opcode_hash): `opcode' is pointer to const element.
370 (build_hash): First arg is now table of sorted pointers.
371 (print_insn_sparc): Sort opcodes by sorting table of pointers.
372 (compare_opcodes): Update.
374 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
376 * cgen-opc.c: #include <ctype.h>.
377 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
378 Handle case insensitive hashing.
379 (hash_keyword_value): Change type of `value' to unsigned int.
381 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
383 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
384 precision FP, mark it as such. Likewise for double precision
385 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
388 (mips_builtin_opcodes): Remove non-existant r5900 instructions
392 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
394 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
395 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
398 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
400 * ppc-opc.c (extract_nsi): make unsigned expression signed before
402 (UNUSED): remove one level of parens, so MSVC doesn't choke on
403 nesting depth when all the macros are expanded.
405 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
407 * sparc-opc.c: The fcmp v9a instructions take an integer register
408 as a destination, not a floating point register. From Christian
409 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
411 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
413 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
414 syntax. From Roman Hodek
415 <rnhodek@faui22c.informatik.uni-erlangen.de>.
417 * i386-dis.c (twobyte_has_modrm): Fix pand.
419 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
421 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
423 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
425 * arm-dis.c: Add prototypes for arm_decode_shift and
428 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
430 * mips-opc.c: Add r3900 insns.
432 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
434 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
435 print delay slot instructions on the same line. When using a PC
436 relative load, add a comment with the value being loaded if it can
439 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
441 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
442 to pushS/popS for segment regs and byte constant so that
443 pushw/popw printed when in 16 bit data mode.
445 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
446 print cbtw, cwtd in 16 bit data mode.
447 * i386-dis.c (putop): extra case W to support above.
449 * i386-dis.c (print_insn_x86): print addr32 prefix when given
450 address size prefix in 16 bit address mode.
452 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
454 * sh-dis.c: Reindent. Rename local variable fprintf to
457 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
459 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
461 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
463 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
465 * mips16-opc.c (mip16_opcodes): same.
467 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
469 * m68k-opc.c (moveb): Change $d to %d.
471 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
473 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
474 (twobyte_has_modrm): Likewise.
476 (OP_MMX, OP_EM, OP_MS): New static functions.
478 * i386-dis.c: Revert patch of April 4. The output now matches
481 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
483 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
486 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
488 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
490 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
492 * Makefile.in (install): Depend upon installdirs.
493 (installdirs): New target.
495 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
497 From Thomas Graichen <graichen@rzpd.de>:
498 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
499 * configure: Rebuild.
501 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
503 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
504 Delete string{,s}.h support.
506 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
508 * cgen-asm.c (cgen_parse_operand_fn): New global.
509 (cgen_parse_{{,un}signed_integer,address}): Update call to
510 cgen_parse_operand_fn.
511 (cgen_init_parse_operand): New function.
512 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
513 from cgen_asm_init_parse.
514 (m32r_cgen_assemble_insn): New operand `errmsg'.
515 Delete call to as_bad, return error message to caller.
516 (m32r_cgen_asm_hash_keywords): #if 0 out.
518 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
520 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
522 [case 'J']: Fix typo in register name.
524 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
526 * configure.in: Substitute SHLIB_LIBS.
527 * configure: Rebuild.
528 * Makefile.in (SHLIB_LIBS): New variable.
529 ($(SHLIB)): Use $(SHLIB_LIBS).
531 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
533 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
535 * cgen-opc.c (hash_keyword_name): Improve algorithm.
537 * disassemble.c (disassembler): Handle m32r.
539 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
541 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
542 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
543 * Makefile.in (CFILES): Add them.
544 (ALL_MACHINES): Add them.
545 (dependencies): Regenerate.
546 * configure.in (cgen_files): New variable.
547 (bfd_m32r_arch): Add entry.
548 * configure: Regenerate.
550 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
552 * configure.in: Correct file names for bfd_mn10[23]00_arch.
553 * configure: Rebuild.
555 * Makefile.in: Rebuild dependencies.
557 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
559 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
562 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
564 * Branched binutils 2.8.
566 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
568 * m10200-dis.c: Rename from mn10200-dis.c.
569 * m10200-opc.c: Rename from mn10200-opc.c.
570 * m10300-dis.c: Rename from mn10300-dis.c
571 * m10300-opc.c: Rename from mn10300-opc.c.
572 * Makefile.in: Update accordingly.
574 * mips16-opc.c: Add mul and dmul macros.
576 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
578 * makefile.vms: Update CFLAGS, add clean target.
580 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
582 * mips-opc.c: Add "wait". From Ralf Baechle
583 <ralf@gnu.ai.mit.edu>.
585 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
586 * configure, config.in: Rebuild.
587 * sysdep.h: Include <stdlib.h> if it exists.
588 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
590 * Makefile.in: Rebuild dependencies.
592 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
594 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
595 Andrew Bray <andy@madhouse.demon.co.uk>.
597 * mips-opc.c: Add cast when setting mips_opcodes.
599 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
601 * v850-dis.c (disassemble): Fix sign extension problem.
602 * v850-opc.c (extract_d*): Fix sign extension problems to make
603 disassembly calculate branch offsets correctly.
605 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
607 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
609 * mips-opc.c: Add dctr and dctw.
612 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
614 * d30v-dis.c (print_insn): Change the way signed constants
617 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
619 * Makefile.in (BFD_H): New variable.
620 (HFILES): New variable.
621 (CFILES): Add all C files.
622 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
623 Delete old dependencies, and build new ones.
624 * dep-in.sed: New file.
626 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
628 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
630 start-sanitize-coldfire
631 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
633 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
636 end-sanitize-coldfire
637 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
639 * mn10200-opc.c: Change "trap" to "syscall".
640 * mn10300-opc.c: Add new "syscall" instruction.
642 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
644 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
645 mulul insns on the coldfire.
647 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
649 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
650 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
651 (print_insn_little_arm): Likewise.
653 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
655 Based on patches from H.J. Lu <hjl@lucon.org>:
656 * i386-dis.c (fetch_data): Add prototype.
657 * m68k-dis.c (fetch_data): Add prototype.
658 (dummy_print_address): Add prototype. Make static.
659 * ppc-opc.c (valid_bo): Add prototype.
660 * sparc-dis.c (build_hash_table): Add prototype.
661 (is_delayed_branch, compute_arch_mask): Add prototypes.
662 (print_insn_sparc): Make several local variables const.
663 (compare_opcodes): Change arguments to const PTR. Add prototype.
664 * sparc-opc.c (arg): Change name field to be const.
665 (lookup_name, lookup_value): Add prototypes. Change table and
666 name parameters to be const.
667 (sparc_encode_asi): Change name parameter to be const.
668 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
669 (sparc_encode_sparclet_cpreg): Likewise.
670 (sparc_decode_asi): Change return type to be const.
671 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
672 (sparc_decode_sparclet_cpreg): Likewise.
674 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
676 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
677 Solaris doesn't like the combined options, and the -f is
679 (stamp-tshlink, install): Likewise.
681 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
683 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
686 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
688 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
690 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
692 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
695 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
697 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
700 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
702 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
704 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
706 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
709 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
711 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
712 floatformat_to_double to make portable.
713 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
716 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
718 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
719 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
721 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
723 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
724 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
727 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
729 * tic80-opc.c (LSI_SCALED): Renamed from this ...
730 (OFF_SL_BR_SCALED): ... to this, and added the flag
731 TIC80_OPERAND_BASEREL to the flags word.
732 (tic80_opcodes): Replace all occurances of LSI_SCALED with
736 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
738 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
739 Change mips_opcodes from const array to a pointer,
740 and change bfd_mips_num_opcodes from const int to int,
741 so that we can increase the size of the mips opcodes table
745 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
747 * tic80-opc.c (tic80_predefined_symbols): Revert change to
748 store BITNUM values in the table in one's complement form
749 to match behavior when assembler is given a raw numeric
750 value for a BITNUM operand.
751 * tic80-dis.c (print_operand_bitnum): Ditto.
755 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
757 * d30v-opc.c: Removed references to FLAG_X.
760 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
762 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
765 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
767 * Makefile.in: Added d30v object files.
768 * configure: (bfd_d30v_arch) Rebuilt.
769 * configure.in: (bfd_d30v_arch) Added new case.
770 * d30v-dis.c: New file.
771 * d30v-opc.c: New file.
772 * disassemble.c (disassembler) Add entry for d30v.
776 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
778 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
779 representations for the floating point BITNUM values.
781 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
783 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
784 in the table in one's complement form, as they appear in the
786 (tic80_symbol_to_value): Use macros to access predefined
788 (tic80_value_to_symbol): Ditto.
789 (tic80_next_predefined_symbol): New function.
790 * tic80-dis.c (print_operand_bitnum): Remove code that did
791 one's complement for BITNUM values.
795 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
797 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
800 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
802 * makefile.vms: Remove 8 bit characters. Update to latest
805 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
807 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
809 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
811 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
812 (IMM24_PCREL): Likewise.
814 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
816 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
817 address for an extended PC relative instruction that is not a
820 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
822 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
826 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
828 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
829 (tic80_opcodes): Sort entries so that long immediate forms
830 come after short immediate forms, making it easier for
831 assembler to select the right one for a given operand.
834 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
836 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
838 (print_insn_mips16): Likewise.
841 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
843 * mips-opc.c: add r5900.
847 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
849 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
850 a symbol class that restricts translation to just that
851 class (general register, condition code, etc).
853 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
855 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
856 and REG_DEST_E for register operands that have to be
857 an even numbered register. Add REG_FPA for operands that
858 are one of the floating point accumulator registers.
859 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
860 (tic80_opcodes): Change entries that need even numbered
861 register operands to use the new operand table entries.
862 Add "or" entries that are identical to "or.tt" entries.
865 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
867 * mips16-opc.c: Add new cases of exit instruction for
869 * mips-dis.c (print_mips16_insn_arg): Display floating point
870 registers in operands of exit instruction. Print `$' before
871 register names in operands of entry and exit instructions.
874 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
876 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
877 pairs for all predefined symbols recognized by the assembler.
878 Also used by the disassembling routines.
879 (tic80_symbol_to_value): New function.
880 (tic80_value_to_symbol): New function.
881 * tic80-dis.c (print_operand_control_register,
882 print_operand_condition_code, print_operand_bitnum):
883 Remove private tables and use tic80_value_to_symbol function.
886 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
888 * d10v-dis.c (print_operand): Change address printing
889 to correctly handle PC wrapping. Fixes PR11490.
891 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
893 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
896 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
898 * mips-dis.c (print_insn_mips16): Set insn_info information.
899 (print_mips16_insn_arg): Likewise.
901 * mips-dis.c (print_insn_mips16): Better handling of an extend
902 opcode followed by an instruction which can not be extended.
904 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
906 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
907 coldfire moveb instruction to not allow an address register as
908 destination. Although the documentation does not indicate that
909 this is invalid, experiments uncovered unexpected behavior.
910 Added a comment explaining the situation. Thanks to Andreas
911 Schwab for pointing this out to me.
914 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
916 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
917 entries are presorted so that entries with the same mnemonic are
918 adjacent to each other in the table. Sort the entries for each
919 instruction so that this is true.
922 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
924 * m68k-dis.c: Include <libiberty.h>.
925 (print_insn_m68k): Sort the opcode table on the most significant
926 nibble of the opcode.
929 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
931 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
932 "vsub", "vst", "xnor", and "xor" instructions.
933 (V_a1): Renamed from V_a, msb of accumulator reg number.
934 (V_a0): Add macro, lsb of accumulator reg number.
936 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
938 * tic80-dis.c (print_insn_tic80): Broke excessively long
939 function up into several smaller ones and arranged for
940 the instruction printing function to be callable recursively
941 to print vector instructions that have both a load and a
942 math instruction packed into a single opcode.
943 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
944 to explain why it comes after the other vector opcodes.
947 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
949 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
950 move insns to handle immediate operands.
952 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
954 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
955 fix operand mask in the "moveml" entries for the coldfire.
958 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
960 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
961 New macros for building vector instruction opcodes.
962 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
963 FMT_LI, which were unused. The field is now a flags field.
964 Remove some opcodes that are possible, but illegal, such
965 as long immediate instructions with doubles for immediate
966 values. Add "vadd" and "vld" instructions.
968 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
970 * tic80-opc.c (tic80_operands): Reorder some table entries to make
971 the order more logical. Move the shift alias instructions ("rotl",
972 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
973 interspersed with the regular sr.x and sl.x instructions. Add
974 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
975 "sub", "subu", "swcr", and "trap".
977 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
979 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
980 (OFF_SL_PC): Renamed from OFF_SL.
981 (OFF_SS_BR): New operand type for base relative operand.
982 (OFF_SL_BR): New operand type for base relative operand.
983 (REG_BASE): New operand type for base register operand.
984 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
985 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
986 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
988 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
989 10 char field, padded with spaces on rhs, rather than a string
990 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
991 than old TIC80_OPERAND_RELATIVE. Add support for new
992 TIC80_OPERAND_BASEREL flag bit.
994 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
996 * tic80-dis.c (print_insn_tic80): Print floating point operands
998 * tic80-opc.c (SPFI): Add single precision floating point
999 immediate operand type.
1000 (ROTATE): Add rotate operand type for shifts.
1001 (ENDMASK): Add for shifts.
1002 (n): Macro for the 'n' bit.
1003 (i): Macro for the 'i' bit.
1004 (PD): Macro for the 'PD' field.
1005 (P2): Macro for the 'P2' field.
1006 (P1): Macro for the 'P1' field.
1007 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1011 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1013 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1014 adding in current address for pc-relative operands.
1016 start-sanitize-tic80
1017 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1019 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1020 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1021 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1022 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1023 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1024 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1025 (REG_SCALED, LSI_SCALED): New operand types.
1026 (E): New macro for 'E' bit at bit 27.
1027 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1028 opcodes, including the various size flavors (b,h,w,d) for
1029 the direct load and store instructions.
1031 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1033 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1035 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1036 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1037 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1038 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1039 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1040 masks with "MASK_* & ~M_*" to get the M bit reset.
1041 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1043 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1045 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1046 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1047 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1049 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1050 CC, SICR, and LICR table entries.
1051 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1052 "bcnd", and "brcr" opcodes.
1055 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1057 * ppc-opc.c (powerpc_operands): Make comment match the
1058 actual fields (no shift field).
1059 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1060 start-sanitize-tic80
1061 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1062 partial implementation, work in progress.
1063 * tic80-opc.c (tic80_operands): Begin construction operands table.
1064 (tic80_opcodes): Continue populating opcodes table and start
1065 filling in the operand indices.
1066 (tic80_num_opcodes): Add this.
1069 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1071 * m68k-opc.c: Add #B case for moveq.
1073 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1075 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1076 before they are used.
1078 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1080 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1081 for "breakpoint" instruction.
1083 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1085 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1086 (dep): Use ALL_CFLAGS rather than CFLAGS.
1088 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1090 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1093 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1095 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1096 start-sanitize-tic80
1097 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1100 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1102 * mips16-opc.c: Add "abs".
1104 start-sanitize-tic80
1105 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1107 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1108 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1109 (disassembler): Add bfd_arch_tic80 support to set disassemble
1110 to print_insn_tic80.
1111 * tic80-dis.c (print_insn_tic80): Add stub.
1113 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1115 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1116 * configure: Regenerate with autoconf.
1117 * tic80-dis.c: Add file.
1118 * tic80-opc.c: Add file.
1121 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1123 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1125 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1127 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1128 (mn10200_opcodes): Use it for some logicals and btst insns.
1129 Add "break" and "trap" instructions.
1131 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1133 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1135 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1137 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1138 relative load or add now depends upon whether the instruction is
1141 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1143 * mn10200-dis.c: Finish writing disassembler.
1144 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1145 Fix mask for "jmp (an)".
1147 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1148 handle endianness issues for mn10300.
1150 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1152 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1154 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1155 instruction. Fix opcode field for "movb (imm24),dn".
1157 * mn10200-opc.c (mn10200_operands): Fix insertion position
1160 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1162 * mn10200-opc.c: Create mn10200 opcode table.
1163 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1164 but moving along nicely.
1166 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1168 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1170 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1172 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1173 specifiers for fmovem* instructions.
1175 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1177 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1179 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1181 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1184 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1186 * mn10300-opc.c: Add some comments explaining the various
1189 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1191 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1193 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1196 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1197 operand specifiers in fmovm* instructions.
1199 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1201 * ppc-opc.c (insert_li): Give an error if the offset has the two
1202 least significant bits set.
1204 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1206 * mips-dis.c (print_insn_mips16): Separate the instruction from
1207 the arguments with a tab, not a space.
1209 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1211 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1214 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1217 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1219 * configure: Rebuild with autoconf 2.12.
1221 Add support for mips16 (16 bit MIPS implementation):
1222 * mips16-opc.c: New file.
1223 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1224 (mips16_reg_names): New static array.
1225 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1226 after seeing a 16 bit symbol.
1227 (print_insn_little_mips): Likewise.
1228 (print_insn_mips16): New static function.
1229 (print_mips16_insn_arg): New static function.
1230 * mips-opc.c: Add jalx instruction.
1231 * Makefile.in (mips16-opc.o): New target.
1232 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1233 * configure: Rebuild.
1235 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1237 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1238 operand specifiers in *save, *restore and movem* instructions.
1240 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1243 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1244 register operands for immediate arithmetic, not, neg, negx, and
1245 set according to condition instructions.
1247 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1248 specifier of the effective-address operand in immediate forms of
1249 arithmetic instructions. The specifier for the immediate operand
1250 notes how and where the constant will be stored.
1252 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1254 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1257 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1260 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1262 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1264 * mn10300-dis.c (disassemble): Handle register lists.
1266 * mn10300-opc.c: Fix handling of register list operand for
1267 "call", "ret", and "rets" instructions.
1269 * mn10300-dis.c (disassemble): Print PC-relative and memory
1270 addresses symbolically if possible.
1271 * mn10300-opc.c: Distinguish between absolute memory addresses,
1272 pc-relative offsets & random immediates.
1274 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1276 (disassemble): Handle SPLIT and EXTENDED operands.
1278 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1280 * mn10300-dis.c: Rough cut at printing some operands.
1282 * mn10300-dis.c: Start working on disassembler support.
1283 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1285 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1287 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1289 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1291 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1293 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1295 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1296 register argument is calls and jmp instructions.
1298 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1300 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1301 getx operand. Fix opcode for mulqu imm,dn.
1303 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1305 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1306 in MN10300_OPERAND_SPLIT operands for how many bits
1307 appear in the basic insn word. Add IMM32_HIGH24,
1308 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1309 (mn10300_opcodes): Use new operands as needed.
1311 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1312 for bset, bclr, btst instructions.
1313 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1315 * mn10300-opc.c (mn10300_operands): Remove many redundant
1316 operands. Update opcode table as appropriate.
1317 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1318 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1320 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1322 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1323 operands (for indexed load/stores). Fix bitpos for DI
1324 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1325 few instructions that insert immediates/displacements in the
1326 middle of the instruction. Add IMM8E for 8 bit immediate in
1327 the extended part of an instruction.
1328 (mn10300_operands): Use new opcodes as appropriate.
1330 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1332 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1333 sequential so the assembler never parallelizes it with
1336 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1338 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1339 a data/address register that appears in register field 0
1340 and register field 1.
1341 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1343 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1345 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1346 standard disassembly.
1348 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1349 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1350 Recategorize PALcode instructions.
1352 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1354 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1356 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1358 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1359 there are no operand types.
1361 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1363 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1365 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1367 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1369 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1371 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1373 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1374 and sst.w instructions.
1376 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1379 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1381 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1384 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1386 * ppc-opc.c (PPCPWR2): Define.
1387 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1390 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1392 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1393 field for movhu instruction.
1395 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1396 cast value to "long" not "signed long" to keep hpux10
1399 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1401 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1404 * mn10300-opc.c (FMT*): Remove definitions.
1406 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1407 for shift-by-register opcodes.
1409 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1410 into [AD][MN][01] for encoding the position of the register
1413 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1415 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1416 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1418 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1420 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1421 Fix various typos. Add "PAREN" operand.
1422 (MEM, MEM2): Define.
1423 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1424 operands. Fix several typos.
1426 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1429 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1431 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1432 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1434 (mn10300_opcodes): Break opcode format out into its own field.
1435 Update many operand fields to deal with signed vs unsigned
1436 issues. Fix one or two typos in the "mov" instruction
1437 opcode, mask and/or operand fields.
1439 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1441 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1442 m68851 wasn't reset.
1444 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1446 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1447 all opcodes. Very rough cut at operands for all opcodes.
1449 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1452 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1454 * mn10200-opc.c, mn10300-opc.c: New files.
1455 * mn10200-dis.c, mn10300-dis.c: New files.
1456 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1457 * disassemble.c: Break mn10x00 support into 10200 and 10300
1459 * configure.in: Likewise.
1460 * configure: Rebuilt.
1462 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1464 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1466 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1468 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1470 * disassemble (ARCH_mn10x00): Define.
1471 (disassembler): Handle bfd_arch_mn10x00.
1472 * configure.in: Recognize bfd_mn10x00_arch.
1473 * configure: Rebuilt.
1475 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1477 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1478 accordingly. Don't declare functions using op_rtn.
1480 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1482 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1483 params to be more standard.
1484 * (disassemble): Print absolute addresses and symbolic names for
1485 branch and jump targets.
1486 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1488 * (v850_opcodes): Add breakpoint insn.
1490 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1492 * m68k-opc.c: Move the fmovemx data register cases before the
1493 other cases, so that they get recognized before the data register
1494 does gets treated as a degenerate register list.
1496 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1498 * mips-opc.c: Add a case for "div" and "divu" with two registers
1499 and a destination of $0.
1501 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1503 * mips-dis.c (print_insn_arg): Add prototype.
1504 (_print_insn_mips): Ditto.
1506 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1508 * mips-dis.c (print_insn_arg): Print condition code registers as
1511 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1513 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1515 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1517 * v850-dis.c (disassemble): Make static. Provide prototype.
1519 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1521 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1524 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1526 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1527 ']' characters into the output stream.
1528 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1529 Add "memop" field to all opcodes (for the disassembler).
1530 Reorder opcodes so that "nop" comes before "mov" and "jr"
1531 comes before "jarl".
1533 * v850-dis.c (print_insn_v850): Fix typo in last change.
1535 * v850-dis.c (print_insn_v850): Properly handle disassembling
1536 a two byte insn at the end of a memory region when the memory
1537 region's size is only two byte aligned.
1539 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1541 * v850-dis.c (v850_reg_names): Define.
1542 (v850_sreg_names, v850_cc_names): Likewise.
1543 (disassemble): Very rough cut at printing operands (unformatted).
1545 * v850-opc.c (BOP_MASK): Fix.
1546 (v850_opcodes): Fix mask for jarl and jr.
1548 * v850-dis.c: New file. Skeleton for disassembler support.
1549 * Makefile.in Remove v850 references, they're not needed here.
1550 * configure.in: Add v850-dis.o when building v850 toolchains.
1551 * configure: Rebuilt.
1552 * disassemble.c (disassembler): Call v850 disassembler.
1554 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1555 (insert_d8_6, extract_d8_6): New functions.
1556 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1557 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1559 (IF4A, IF4B): Use "D7" instead of "D7S".
1560 (IF4C, IF4D): Use "D8_7" instead of "D8".
1561 (IF4E, IF4F): New. Use "D8_6".
1562 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1563 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1565 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1566 (v850_operands): Change D16 to D16_15, use special insert/extract
1567 routines. New new D16 that uses the generic insert/extract code.
1568 (IF7A, IF7B): Use D16_15.
1569 (IF7C, IF7D): New. Use D16.
1570 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1572 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1573 message. Issue an error if the branch offset is odd.
1575 * v850-opc.c: Add notes about needing special insert/extract
1576 for all the load/store insns, except "ld.b" and "st.b".
1578 * v850-opc.c (insert_d22, extract_d22): New functions.
1579 (v850_operands): Use insert_d22 and extract_d22 for
1581 (insert_d9): Fix range check.
1583 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1585 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1586 and set bits field to D9 and D22 operands.
1588 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1590 * v850-opc.c (v850_operands): Define SR2 operand.
1591 (v850_opcodes): "ldsr" uses R1,SR2.
1593 * v850-opc.c (v850_opcodes): Fix opcode specs for
1594 sld.w, sst.b, sst.h, sst.w, and nop.
1596 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1598 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1599 end of the opcode table.
1601 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1603 * d10v-opc.c (pre_defined_registers): Added register pairs,
1604 "r0-r1", "r2-r3", etc.
1606 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1608 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1609 Create I16U for an unsigned 16bit mmediate operand.
1610 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1612 * v850-opc.c (v850_operands): Define EP operand.
1613 (IF4A, IF4B, IF4C, IF4D): Use EP.
1615 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1616 with immediate operand, "movhi". Tweak "ldsr".
1618 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1619 correct. Get sld.[bhw] and sst.[bhw] closer.
1621 * v850-opc.c (v850_operands): "not" is a two byte insn
1623 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1625 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1627 * v850-opc.c (two): Get order of words correct.
1629 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1631 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1632 register source and destination operands.
1633 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1635 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1636 same thinko in "trap" opcode.
1638 * v850-opc.c (v850_opcodes): Add initializer for size field
1641 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1642 Add D8 for 8-bit unsigned field in short load/store insns.
1643 (IF4A, IF4D): These both need two registers.
1644 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1645 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1646 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1647 for "ldsr" and "stsr".
1648 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1651 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1652 short store word (sst.w).
1654 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1656 * v850-opc.c (v850_operands): Added insert and extract fields,
1657 pointers to functions that handle unusual operand encodings.
1659 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1661 * v850-opc.c (v850_opcodes): Enable "trap".
1663 * v850-opc.c (v850_opcodes): Fix order of displacement
1664 and register for "set1", "clr1", "not1", and "tst1".
1666 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1668 * v850-opc.c (v850_operands): Add "B3" support.
1669 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1672 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1674 * v850-opc.c: Close unterminated comment.
1676 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1678 * v850-opc.c (v850_operands): Add flags field.
1679 (v850_opcodes): add move opcodes.
1681 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1683 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1684 * configure: (bfd_v850v_arch) Add new case.
1685 * configure.in: (bfd_v850_arch) Add new case.
1686 * v850-opc.c: New file.
1688 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1690 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1692 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1694 * d10v-opc.c: Add additional information to the opcode
1695 table to help determinine which instructions can be done
1698 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1700 * mpw-make.sed: Update editing of include pathnames to be
1703 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1705 * arm-opc.h: Added "bx" instruction definition.
1707 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1709 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1711 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1713 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1715 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1717 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1719 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1721 * makefile.vms: Update for alpha-opc changes.
1723 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1725 * i386-dis.c (print_insn_i386): Actually return the correct value.
1726 (ONE, OP_ONE): #ifdef out; not used.
1728 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1730 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1731 Changed subi operand type to treat 0 as 16.
1733 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1735 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1738 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1740 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1741 memory transfer instructions. Add new format string entries %h and %s.
1742 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1745 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1747 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1748 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1750 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1752 * alpha-dis.c (print_insn_alpha_osf): Remove.
1753 (print_insn_alpha_vms): Remove.
1754 (print_insn_alpha): Make globally visible. Chose the register
1755 names based on info->flavour.
1756 * disassemble.c: Always return print_insn_alpha for the alpha.
1758 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1760 * d10v-dis.c (dis_long): Handle unknown opcodes.
1762 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1764 * d10v-opc.c: Changes to support signed and unsigned numbers.
1765 All instructions with the same name that have long and short forms
1766 now end in ".l" or ".s". Divs added.
1767 * d10v-dis.c: Changes to support signed and unsigned numbers.
1769 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1771 * d10v-dis.c: Change all functions to use info->print_address_func.
1773 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1775 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1776 move ccr/sr insns more strict so that the disassembler only
1777 selects them when the addressing mode is data register.
1779 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1780 * d10v-opc.c (pre_defined_registers): Declare.
1781 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1782 to pick a better name for the registers.
1784 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1786 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1787 operands for fexpand and fpmerge. From Christian Kuehnke
1788 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1790 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1792 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1793 print routine. Take new regnames and cpumask arguments.
1794 Kill the environment variable nonsense.
1795 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1796 (print_insn_alpha_vms): New function. Do VMS style regnames.
1797 * disassemble.c (disassembler): Test bfd flavour to pick
1798 between OSF and VMS routines. Default to OSF.
1800 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1802 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1803 * configure: Rebuild.
1804 * Makefile.in (install): Use @INSTALL_SHLIB@.
1806 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1808 * configure: (bfd_d10v_arch) Add new case.
1809 * configure.in: (bfd_d10v_arch) Add new case.
1810 * d10v-dis.c: New file.
1811 * d10v-opc.c: New file.
1812 * disassemble.c (disassembler) Add entry for d10v.
1814 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1816 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1817 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1819 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1821 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1822 distinguish between variants of the instruction set.
1823 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1824 distinguish between variants of the instruction set.
1826 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1828 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1829 the 8086 instruction set.
1830 * i386-dis.c: General cleanups. Make most things static. Add
1831 prototypes. Get rid of static variables aflags and dflags. Pass
1832 them as args (to almost everything).
1834 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1836 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1838 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1840 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1841 if the next arg is marked with SRC_IN_DST. Gross.
1843 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1844 we're looking for and find EXR.
1846 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1847 if we're looking for KBIT and we don't find it.
1849 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1852 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1853 3bit immediate operands.
1855 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1857 * Released binutils 2.7.
1859 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1860 <kkaempf@progis.ac-net.de>.
1862 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1864 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1866 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1868 * sparc-dis.c (print_insn_sparclite): New routine to print
1869 sparclite instructions.
1871 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1873 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1875 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1877 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1878 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1879 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1881 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1883 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1884 Use autoconf-set values.
1885 (docdir, oldincludedir): Removed.
1886 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1888 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1890 * alpha-opc.c: New file.
1891 * alpha-opc.h: Remove.
1892 * alpha-dis.c: Complete rewrite to use new opcode table.
1893 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1894 * configure: Rebuild with autoconf 2.10.
1895 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1896 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1898 (alpha-opc.o): New target.
1900 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1902 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1903 Set imm_added_to_rs1 even if the source and destination register
1906 * sparc-opc.c: Add some two operand forms of the wr instruction.
1908 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1910 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1913 * disassemble.c (disassembler): Handle H8/S.
1914 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1916 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1918 * sparc-opc.c: Add beq/teq as aliases for be/te.
1920 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1921 <sergei@msil.sps.mot.com>.
1923 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1925 * makefile.vms: New file.
1927 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1929 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1931 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1934 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1936 * i386-dis.c (OP_OFF): Call append_prefix.
1938 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1940 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1941 unsigned long to silence a warning from the Solaris PowerPC
1944 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1946 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1948 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1950 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1952 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1953 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1954 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1955 cpush, cpusha, cpull sparclet insns.
1957 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1959 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1961 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1963 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1964 Set F_FLOAT on other floating point instructions.
1966 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1968 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1970 (powerpc_opcodes): Add 860/821 specific SPRs.
1972 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1974 * configure.in: Permit --enable-shared to specify a list of
1975 directories. Set and substitute BFD_PICLIST.
1976 * configure: Rebuild.
1977 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1978 uses. Set to @BFD_PICLIST@.
1980 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1982 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1983 not "abs", which may be needed for the absolute in something
1984 like btst #0,@10:8. Print L_3 immediates separately from other
1985 immediates. Change ABSMOV reference to ABS8MEM.
1987 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1989 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1990 (current_arch_mask): New static global.
1991 (compute_arch_mask): New static function.
1992 (print_insn_sparc): Delete sparc_v9_p. New static local
1993 current_mach. Resort opcode table if current_mach changes.
1994 Generalize "insn not supported" test.
1995 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1996 Delete test for v9/!v9.
1997 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1999 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2000 (brfcx): Renamed to FBRX.
2001 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2002 coprocessor mnemonics are not supported on the sparclet).
2003 (condf): Renamed to CONDF.
2004 (SLCBCC2): Delete F_ALIAS flag.
2006 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2008 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2009 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2011 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2013 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2014 that the shared library version number is set correctly.
2016 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2018 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2019 Miles Bader <miles@gnu.ai.mit.edu>.
2020 * configure: Rebuild.
2022 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2024 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2027 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2029 * configure: Rebuild with autoconf 2.8.
2031 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2033 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2034 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2036 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2038 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2039 since they appear as targets in Makefile.in.
2040 * configure: Rebuild.
2042 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2044 * mpw-make.sed: Edit out shared library support bits.
2046 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2048 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2049 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2050 (sparc_opcodes): Add sparclet insns.
2051 (sparclet_cpreg_table): New static local.
2052 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2053 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2055 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2057 * i386-dis.c (index16): New static variable.
2058 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2060 (OP_indirE): Return result of OP_E.
2061 (OP_E): Check for 16 bit addressing mode, and disassemble
2062 correctly. Optimised 32 bit case a little. Don't print
2063 "(base,index,scale)" when sib specifies only an offset.
2065 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2067 * configure.in: Set and substitute SHLIB_DEP.
2068 * configure: Rebuild.
2069 * Makefile.in (SHLIB_DEP): New variable.
2070 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2071 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2072 COMMON_SHLIB, add them to piclist with appropriate modifications.
2073 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2074 here: just use piclist.
2076 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2078 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2079 (print_insn_sparc): Rewrite v9/not-v9 tests.
2080 (compare_opcodes): Likewise.
2081 * sparc-opc.c (MASK_<ARCH>): Define.
2082 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2083 (sparclet,v6notv9): Define.
2084 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2085 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2087 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2089 * configure.in: Call AC_PROG_CC before configure.host.
2090 * configure: Rebuild.
2092 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2094 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2096 * i386-dis.c (onebyte_has_modrm): New static array.
2097 (twobyte_has_modrm): New static array.
2098 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2100 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2102 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2105 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2107 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2110 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2112 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2113 m68010up, not just m68020up | cpu32.
2115 * Makefile.in (SONAME): New variable.
2116 ($(SHLINK)): Make a link to the transformed name, as well.
2117 (stamp-tshlink): New target.
2118 (install): Skip stamp-tshlink during install.
2120 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2122 * configure.in: Call AC_ARG_PROGRAM.
2123 * configure: Rebuild.
2124 * Makefile.in (program_transform_name): New variable.
2125 (install): Transform library name before installing it.
2127 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2129 * i960-dis.c (mem): Add HX dcinva instruction.
2131 Support for building as a shared library, based on patches from
2132 Alan Modra <alan@spri.levels.unisa.edu.au>:
2133 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2134 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2135 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2136 * configure: Rebuild.
2137 * Makefile.in (ALLLIBS): New variable.
2138 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2139 (COMMON_SHLIB, SHLINK): New variables.
2140 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2141 (STAGESTUFF): Remove variable.
2142 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2143 (stamp-piclist, piclist): New targets.
2144 ($(SHLIB), $(SHLINK)): New targets.
2145 ($(OFILES)): Depend upon stamp-picdir.
2146 (disassemble.o): Build twice if PICFLAG is set.
2147 (MOSTLYCLEAN): Add pic/*.o.
2148 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2149 (distclean): Remove pic and stamp-picdir.
2150 (install): Install shared libraries.
2151 (stamp-picdir): New target.
2153 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2155 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2156 Print unknown instruction as "unknown", rather than in hex.
2158 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2160 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2162 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2164 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2166 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2168 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2169 when necessary. From Ulrich Drepper
2170 <drepper@myware.rz.uni-karlsruhe.de>.
2172 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2174 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2175 sparc_num_opcodes. Update architecture enum values.
2176 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2177 (sparc_opcode_lookup_arch): New function.
2178 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2179 (sparc_opcodes): Add v9a shutdown insn.
2181 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2183 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2184 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2186 (print_insn_sparc64): Deleted.
2187 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2190 * sparc-opc.c (architecture_pname): Add v9a.
2192 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2194 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2195 incorrectly defined as 0x16 when it should be 0x15.
2196 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2197 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2198 excb (exception barrier) which is defined in the Alpha
2199 Architecture Handbook version 2.
2200 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2201 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2202 disassembled as or, for example.
2204 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2206 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2207 (_print_insn_mips): Change i from int to unsigned int.
2209 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2211 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2212 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2214 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2216 * i386-dis.c: Added Pentium Pro instructions.
2218 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2220 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2223 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2225 * sh-opc.h (sh_nibble_type): Added REG_B.
2226 (sh_arg_type): Added A_REG_B.
2227 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2229 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2231 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2233 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2235 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2237 * Makefile.in (distclean): Remove stamp-h. From Ronald
2238 F. Guilmette <rfg@monkeys.com>.
2240 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2242 From David Mosberger-Tang <davidm@azstarnet.com>:
2243 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2246 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2248 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2249 (sh_table): Added many SH3 opcodes.
2250 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2252 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2254 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2255 (subco,subco.): Mark this PPC, not PPCCOM.
2257 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2259 * configure: Rebuild with autoconf 2.7.
2261 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2263 * configure: Rebuild with autoconf 2.6.
2265 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2267 * configure.in: Sort list of architectures. Accept but do nothing
2268 for alliant, convex, pyramid, romp, and tahoe.
2270 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2272 * a29k-dis.c (print_special): Change num to unsigned int.
2274 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2276 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2279 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2281 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2282 * configure: Rebuilt.
2284 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2286 * configure.in: Add case for bfd_i860_arch.
2287 * configure: Rebuild.
2289 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2291 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2292 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2293 (NEXTDOUBLE): Likewise.
2294 (print_insn_m68k): Don't match fmoveml if there is more than one
2295 register in the list.
2296 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2298 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2300 * m68k-opc.c: Use #W rather than #w.
2301 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2303 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2305 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2306 and likewise for all the dbxx opcodes.
2308 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2310 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2312 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2314 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2315 the VR4100 specific instructions to the mips_opcodes structure.
2317 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2319 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2320 ugly Metrowerks bug in CW6, is fixed in CW7.
2322 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2324 * ppc-opc.c (whole file): Add flags for common/any support.
2326 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2328 * Makefile.in (BISON): Remove macro.
2329 (FLAGS_TO_PASS): Remove BISON.
2331 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2333 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2335 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2336 instructions that take no args by looking at the match mask.
2337 (print_insn_arg): Always print "%" before register names.
2338 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2339 [case '_']: Don't print "@#" before address.
2340 [case 'J']: Use "%s" as format string, not register name.
2341 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2343 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2345 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2348 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2350 From David Mosberger-Tang <davidm@azstarnet.com>
2352 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2353 (alpha_insn_set): added definitions for VAX floating point
2354 instructions (Unix compilers don't generate these, but handcoded
2355 assembly might still use them).
2357 * alpha-dis.c (print_insn_alpha): added support for disassembling
2358 the miscellaneous instructions in the Alpha instruction set.
2360 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2362 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2363 no longer create sysdep.h, sed ppc-opc.c to work around a
2364 serious Metrowerks C bug.
2365 * mpw-make.in: Remove.
2366 * mpw-make.sed: New file, used by mpw-configure to edit
2367 Makefile.in into an MPW makefile.
2369 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2371 * Makefile.in (maintainer-clean): New synonym for realclean.
2373 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2375 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2376 which use '0', '1', and '2' instead. Specify the proper size for
2377 a pmove immediate operand. Correct the pmovefd patterns to be
2378 moves to a register, not from a register.
2379 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2381 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2383 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2384 %psr, %wim, %tbr as F_NOTV9.
2386 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2388 * Makefile.in (Makefile): Just rebuild Makefile when running
2390 (config.h, stamp-h): New targets.
2391 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2392 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2393 rebuilding config.h.
2394 * configure: Rebuild.
2396 * mips-opc.c: Change unaligned loads and stores with "t,A"
2397 operands to use "t,A(b)".
2399 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2401 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2403 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2405 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2406 until 3 instead of until 2.
2408 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2410 * Makefile.in (ALL_CFLAGS): Define.
2411 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2412 (MOSTLYCLEAN): Add config.log.
2413 (distclean): Don't remove config.log.
2414 * configure.in: Substitute HDEFINES.
2415 * configure: Rebuild.
2417 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2419 * sh-opc.h (sh_arg_type): Add F_FR0.
2420 (sh_table, case fmac): Add F_FR0 as first argument.
2422 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2424 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2426 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2428 * sparc-dis.c: Remove all references to NO_V9.
2430 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2432 * aclocal.m4: Just include ../bfd/aclocal.m4.
2433 * configure: Rebuild.
2435 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2437 * sparc-dis.c (X_DISP19): Define.
2438 (print_insn, case 'G'): Use it.
2439 (print_insn, case 'L'): Sign extend displacement.
2441 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2443 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2444 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2445 host_makefile_frag or frags.
2446 * aclocal.m4: New file.
2447 * configure: Rebuild.
2448 * Makefile.in (INSTALL): Set to @INSTALL@.
2449 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2450 (INSTALL_DATA): Set to @INSTALL_DATA@.
2452 (AR_FLAGS): Set to rc rather than qc.
2453 (CC): Define as @CC@.
2454 (CFLAGS): Set to @CFLAGS@.
2455 (@host_makefile_frag@): Remove.
2456 (config.status): Remove dependency upon @frags@.
2458 * configure.in: ../bfd/config.bfd now just sets shell variables.
2459 Use them rather than looking through target Makefile fragments.
2460 * configure: Rebuild.
2462 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2464 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2466 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2468 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2469 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2472 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2473 (lookup_{name,value}): New functions.
2474 (prefetch_table): New static local.
2475 (sparc_{encode,decode}_prefetch): New functions.
2476 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2478 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2480 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2483 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2485 * sh-dis.c: Correct comment on first line of file.
2487 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2489 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2491 * sparc-opc.c (asi, membar): New static locals.
2492 (sparc_{encode,decode}_{asi,membar}): New functions.
2493 (sparc_opcodes, membar insn): Fix.
2494 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2495 Support decoding of membar masks.
2498 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2500 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2502 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2504 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2505 and likewise for the other branches. Add bhs as an alias for bcc,
2506 and likewise for the size variants. Add dbhs as an alias for
2509 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2511 * sh-opc.h (FP sts instructions): Update to match reality.
2513 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2515 * m68k-dis.c: (fpcr_names): Add % before all register names.
2516 (reg_names): Likewise.
2517 (print_insn_arg): Don't explicitly print % before register names.
2518 Add % before register names in static array names. In case 'r',
2519 print data registers as `@(Dn)', not `Dn@'. When printing a
2520 memory address, don't print @# before it.
2521 (print_indexed): Change base_disp and outer_disp from int to
2522 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2523 syntax. Sign extend 8 byte displacement correctly.
2524 (print_base): Print using MIT syntax. Print zpc when appropriate.
2525 Change parameter disp from int to bfd_vma.
2527 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2530 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2532 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2533 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2534 * sh-opc.h (sh_arg_type): Add new operand types.
2535 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2537 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2539 * Makefile.in (distclean): Remove generated file config.h.
2541 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2543 * Makefile.in (distclean): Remove generated file config.h.
2545 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2547 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2549 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2551 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2552 rather than numopcodes. Use m68k_opcodes rather than removed
2553 opcode function. Don't check F_ALIAS.
2554 (print_insn_arg): Change first parameter to be const char *.
2555 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2556 (m68k-opc.o): New target.
2557 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2558 * configure: Rebuild.
2560 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2562 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2563 (opcode_bits, opcode_hash_table): New variables.
2564 (opcodes_initialized): Renamed from opcodes_sorted.
2565 (build_hash_table): New function.
2566 (is_delayed_branch): Use hash table.
2567 (print_insn): Renamed from print_insn_sparc, made static.
2568 Build and use hash table. If !sparc64, ignore sparc64 insns,
2569 and vice-versa if sparc64.
2570 (print_insn_sparc, print_insn_sparc64): New functions.
2571 (compare_opcodes): Move sparc64 opcodes to end.
2572 Print commutative insns with constant second.
2573 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2575 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2577 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2578 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2579 avoids printing a delay slot in a delay slot.
2580 * sh-opc.h (sh_table): Fully bracket last entry.
2582 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2584 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2586 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2588 * configure.in: Get host_makefile_frag from ${srcdir}.
2590 * configure.in: Autoconfiscated. Check for string[s].h. Create
2591 config.h from config.in. Don't set up sysdep.h link.
2592 * sysdep.h: New file.
2593 * configure, config.in: New files, generated from configure.in.
2594 * Makefile.in: Updated to be processed autoconf-style.
2595 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2596 (Makefile): Depend on config.status.
2597 (config.status): New rule.
2598 * configure.bat: Update Makefile substitutions.
2600 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2602 * mips-opc.c (L1): Define.
2603 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2604 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2607 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2609 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2610 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2611 have multiple add units but only a single logical unit.
2613 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2614 shifted by 18, without any insertion or extraction function.
2615 (insert_cr, extract_cr): Remove.
2617 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2619 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2622 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2624 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2625 * sh-opc.h: Add copyright.
2627 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2629 * Makefile.in (crunch-m68k): Delete extra target accidentally
2630 checked in a while ago.
2632 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2634 * sh-opc.h (sh_table): Add SH3 support.
2636 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2638 * sh-opc.h: Added bsrf and braf.
2640 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2642 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2643 bogus [ls]fm{ea,fd} patterns.
2645 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2646 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2647 initialize it from memory. Make function static.
2648 (print_insn_{big,little}_arm): New functions.
2649 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2650 the correct endianness.
2652 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2654 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2657 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2659 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2660 17th, so that it builds again using GCC as the compiler.
2662 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2664 * mips-dis.c (print_insn_little_mips): Cast return value from
2665 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2666 expects an unsigned long, and that might be fewer words of
2667 argument storage (e.g., if bfd_vma is long long on a 32-bit
2669 (print_insn_big_mips): Likewise with bfd_getb32 value.
2670 (_print_insn_mips): Now static.
2672 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2674 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2675 gcc memory hog problem with initializer is fixed.
2677 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2679 Merge in support for Mac MPW as a host.
2680 (Old change descriptions retained for informational value.)
2682 * mpw-config.in (archname): Compute from the config.
2683 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2685 * mpw-config.in (target_arch): Compute from canonical target.
2686 (m68k, mips, powerpc, sparc): Add architectures.
2687 * mpw-make.in (disassemble.c.o): Add.
2688 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2690 * mpw-config.in (BFD_MACHINES): Set to a default value.
2691 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2693 * mpw-make.in (CSEARCH): Add extra-include to search path.
2695 * mpw-config.in (varargs.h): Don't create.
2696 (sysdep.h): Create using forward-include.
2697 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2699 * mpw-config.in: New file, MPW version of configure.in.
2700 * mpw-make.in: New file, MPW version of Makefile.in.
2702 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2704 * alpha-dis.c (print_insn_alpha): Put empty statement after
2707 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2709 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2710 (low_sign_extend): Likewise.
2711 (get_field): Delete unused function.
2712 (set_field, deposit_14, deposit_21): Likewise.
2714 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2716 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2719 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2721 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2723 * alpha-opc.h (OSF_ASMCODE): define
2724 print pal-code names as defined in App C of the
2725 Alpha Architecture Reference Manual
2727 * alpha-dis.c: cleaned up output
2728 print stylized code forms as defined in App A.4.3 of the
2729 Alpha Architecture Reference Manual
2731 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2733 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2735 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2738 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2740 * m68k-dis.c (opcode): New function. Returns address of opcode
2741 table entry given index, even if the opcode table was split to
2742 work around gcc bugs.
2743 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2745 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2746 (reg_names): Now const.
2747 (print_insn_arg): Arrays cacheFieldName and names now const.
2748 (print_indexed): Array scales now const.
2750 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2752 * ppc-opc.c: Sort recently added instructions by minor opcode
2753 number within major opcode number.
2755 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2757 * hppa-dis.c: Include libhppa.h.
2759 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2761 * mips-opc.c: Change dli to use M_DLI, and add dla.
2763 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2765 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2767 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2769 * mips-opc.c: Add r4650 mul instruction.
2771 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2773 * mips-opc.c: Add uld and usd macros for unaligned double load and
2776 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2778 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2779 mfdcr, mtdcr, icbt, iccci.
2781 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2783 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2784 signed char fields to shorts, more portable.
2786 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2788 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2789 char fields as signed chars, since they may have negative values.
2791 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2793 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2794 (mycroft@netbsd.org).
2796 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2798 From "Logg, Ed" <elogg@ea.com>:
2799 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2800 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2803 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2805 * ppc-opc.c: Changes based on patch from David Edelsohn
2806 <edelsohn@mhpcc.edu>.
2807 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2810 (insert_tbr): New static function.
2811 (extract_tbr): New static function.
2812 (XFXFXM_MASK, XFXM): Define.
2813 (XSPRBAT_MASK, XSPRG_MASK): Define.
2814 (powerpc_opcodes): Add instructions to access special registers by
2815 name. Add mtcr and mftbu.
2817 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2819 * mips-opc.c (P3): Define.
2820 (mips_opcodes): Add mad and madu.
2822 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2824 * configure.in: Add W65 support.
2825 * disassemble.c: Likewise.
2826 * w65-opc.h, w65-dis.c: New files.
2828 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2830 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2833 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2835 * mips-opc.c: Add dli as a synonym for li.
2837 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2839 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2840 print something for reserved opcode values, even if it won't
2843 * mips-dis.c (_print_insn_mips): When initializing, shift right
2844 and mask, to avoid sign extension problems on the Alpha.
2846 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2849 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2851 * sh-opc.h (mov.l gbr): Get direction right.
2852 * sh-dis.c (print_insn_shx): New function.
2853 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2854 print opcodes with right byte order.
2856 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2858 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2859 to avoid conflicts with getopt.
2861 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2863 * hppa-dis.c (print_insn_hppa): Read the instruction using
2864 bfd_getb32, so that it works on a little endian or 64 bit host.
2865 Remove unused local variable op.
2867 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2869 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2870 addu does not work correctly if -mips3.
2872 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2874 * a29k-dis.c (print_special): Add special register names defined
2875 on 29030, 29040 and 29050.
2876 (print_insn): Handle new operand type 'I'.
2878 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2880 * Makefile.in (INSTALL): Use top level install.sh script.
2882 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2884 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2885 that it works on a little endian host.
2887 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2889 * configure.in: Use ${config_shell} when running config.bfd.
2891 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2893 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2895 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2897 * a29k-dis.c (print_insn): Print the opcode.
2899 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2901 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2903 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2905 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2907 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2909 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2910 which store a value into memory.
2912 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2914 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2915 * arm-dis.c, arm-opc.h: New files.
2917 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2919 * Makefile.in (ns32k-dis.o): Add dependency.
2920 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2921 string, not as array of chars.
2923 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2925 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2927 * sparc-opc.c: Added sparclite extended FP operations, and
2928 versions of v9 impdep* instructions permitting specification of
2931 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2933 * i960-dis.c (reg_names): Now const.
2934 (struct sparse_tabent): New type, copied from array type in mem
2936 (ctrl): Local static array ctrl_tab now const.
2937 (cobr): Local static array cobr_tab now const.
2938 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2939 static variable mem_tab no longer explicitly initialized. Changed
2940 mem_init to const array of struct sparse_tabent.
2941 (reg): Local static variable reg_tab no longer explicitly
2942 initialized. Changed reg_init to const array of struct
2944 (ea): Local static array scale_tab now const.
2946 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2949 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2951 * configure.bat: the disassember needs to be enabled for
2952 "objdump -d" to work in djgpp.
2954 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2956 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2957 (invalid_float): Enabled general version, doesn't require running
2958 on ns32k host. Changed to take char* argument, and test for
2959 explicitly specified sizes, instead of using sizeof() on host CPU
2961 (INVALID_FLOAT): Cast first argument.
2962 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2963 list_P032, list_M032): Now const.
2964 (optlist, list_search): Made appropriate arguments now point to
2966 (print_insn_arg): Changed static array of one-character-string
2967 pointers into a static const array of characters; fixed sprintf
2968 statement accordingly.
2970 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2972 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2973 from distribution. A ns32k-dis.c from a previous distribution has
2974 been brought up to date and supports the new interface.
2976 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2978 * configure.in: add bfd_ns32k_arch target support.
2980 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2981 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2983 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2985 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2988 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2990 * h8300-dis.c, mips-dis.c: Don't use true and false.
2992 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2994 * configure.in: Change --with-targets to --enable-targets.
2996 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2998 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2999 opcodes to the first instruction with that opcode, to speed
3000 disassembly of large files. From ralphc@pyramid.com (Ralph
3003 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3005 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3007 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3009 * configure.bat: update to latest makefile.in
3011 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3013 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3014 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3015 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3016 slot insn is in a delay slot.
3017 * z8k-opc.h: (resflg): Fix patterns.
3018 * h8500-opc.h Fix CR insn patterns.
3020 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3022 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3023 "cmpl" before POWER versions, so that gas -many uses them.
3025 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3027 * disassemble.c: New file.
3028 * Makefile.in (OFILES): Add disassemble.o.
3029 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3030 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3031 binutils/configure.in.
3033 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3034 opcode being examined.
3036 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3039 (insert_ral, insert_ram, insert_ras): New functions.
3040 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3041 RAS for store with update.
3043 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3045 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3046 (edelsohn@npac.syr.edu).
3048 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3050 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3053 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3055 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3057 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3059 * ppc-opc.c (powerpc_operands): The signedp field has been
3060 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3061 instead. Add new operand SISIGNOPT.
3062 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3063 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3064 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3067 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3069 * i386-dis.c (struct private): Renamed to dis_private. `private'
3070 is a reserved word for dynix cc.
3072 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3074 * configure.in: Change error message to refer to bfd/config.bfd
3075 rather than bfd/configure.in.
3077 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3079 * ppc-opc.c: Define POWER2 as short alias flag.
3080 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3083 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3085 * i960-dis.c (print_insn_i960): Don't read a second word for
3086 opcodes 0, 1, 2 and 3.
3088 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3092 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3094 * m68881-ext.c: Removed; no longer used.
3095 * Makefile.in: Changed accordingly.
3097 * m68k-dis.c (ext_format_68881): Don't declare.
3098 (print_insn_m68k): If an instruction uses place 'i', it uses at
3099 least four fixed bytes.
3100 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3101 extended float, convert to double using floatformat_to_double, not
3102 ieee_extended_to_double, and fetch the data before converting it.
3104 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3106 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3107 davidj@ICSI.Berkeley.EDU (David Johnson).
3109 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3112 PowerPC uses bdnz[l][a].
3114 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3116 * dis-buf.c, i386-dis.c: Include sysdep.h.
3118 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3120 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3122 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3123 by Motorola PowerPC 601 with PPC_OPCODE_601.
3124 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3125 Disassemble Motorola PowerPC 601 instructions as well as normal
3126 PowerPC instructions.
3128 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3130 * i960-dis.c (reg, mem): Just use a static array instead of
3133 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3135 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3136 condition name index if this is for a negated condition.
3138 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3139 Floating point format for 'H' operand is backwards from normal
3140 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3141 operands (fmpyadd and fmpysub), handle bizarre register
3142 translation correctly for single precision format.
3144 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3145 or 'I' operands if the next format specifier is 'M' (fcmp
3146 condition completer).
3148 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3150 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3151 single number giving a bitmask for the MB and ME fields of an M
3152 form instruction. Change NB to accept 32, and turn it into 0;
3153 also turn 0 into 32 when disassembling. Seperated SH from NB.
3154 (insert_mbe, extract_mbe): New functions.
3155 (insert_nb, extract_nb): New functions.
3156 (SC_MASK): Mask out SA and LK bits.
3157 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3158 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3159 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3160 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3161 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3162 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3163 (powerpc_macros): Define table of macro definitions.
3164 (powerpc_num_macros): Define.
3166 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3167 if PPC_OPERAND_NEXT is set.
3169 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3171 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3172 char. Retrieve contents using bfd_getl32 instead of shifting.
3174 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3176 * ppc-opc.c: New file. Opcode table for PowerPC, including
3177 opcodes for POWER (RS/6000).
3178 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3179 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3180 (CFILES): Add ppc-dis.c.
3181 (ppc-dis.o, ppc-opc.o): New targets.
3182 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3184 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3186 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3187 No space before 'u', 'f', or 'N'.
3189 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3191 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3192 farther than we should.
3194 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3196 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3198 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3200 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3202 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3203 needs it, to prevent reading past the end of a section.
3205 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3207 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3208 Removed t,A case for la; always use t,A(b) case.
3210 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 From Ted Lemen <mellon@pepper.ncd.com>
3213 * mips-dis.c (print_insn_arg): Handle 'k'.
3214 * mips-opc.c: Make cache use k, not t.
3216 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3218 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3219 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3220 FLOAT_FORMAT_CODE to put out floating point register names.
3222 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3224 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3226 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3228 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3230 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3232 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3233 larger than 32. Moved dsxx32 variants first for disassembler.
3235 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3237 * z8kgen.c, z8k-opc.h: Add full lda information.
3239 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3241 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3242 movb instructions. Any necessary space will be emitted by
3243 the code to handle nullification completers.
3245 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3247 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3249 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3251 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3252 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3254 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3256 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3258 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3260 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3261 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3263 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3265 * m88k-dis.c (m88kdis): comment change. Remove space after
3267 (printop): handle new arg types DEC and XREG for m88110.
3269 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3271 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3272 type for absolute branch addresses. Delete special
3273 "ble" and "be" code in 'W' operand code.
3275 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3277 * mips-opc.c: Set hazard information correctly for branch
3278 likely instructions.
3280 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3282 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3283 info->fprintf_func for printing and info->print_address_func for
3286 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3288 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3290 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3293 Corrected second case of "b" for disassembler.
3295 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3298 to BFD swapping routines to correspond to BFD name changes.
3300 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3302 * mips-opc.c: Change div machine instruction to be z,s,t rather
3303 than s,t. Change div macro to be d,v,t rather than d,s,t.
3304 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3305 rem and remu which generates only the corresponding div
3306 instruction. This is for compatibility with the MIPS assembler,
3307 which only generates the simple machine instruction when an
3308 explicit destination of $0 is used.
3309 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3311 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3313 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3314 WR_31 hazard for bal, bgezal, bltzal.
3316 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3318 * hppa-dis.c (print_insn_hppa): Use print function
3319 from within the disassemble_info, not fprintf_filtered.
3321 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3323 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3324 Law, law@cs.utah.edu.)
3326 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3328 * mips-opc.c ("absu"): Removed.
3331 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3333 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3334 Changed hazard information to distinguish between memory load
3335 delays and coprocessor load delays.
3337 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3339 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3341 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3343 * configure.in: Don't pass cpu to config.bfd.
3345 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3347 * m88k-dis.c (m88kdis): Make class unsigned.
3349 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3351 * alpha-dis.c (print_insn_alpha): One branch format case was
3352 missing the instruction name.
3354 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3356 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3357 Add the arch-specific auxiliary files.
3358 (OFILES): Remove the arch-specific auxiliary files
3359 and use BFD_MACHINES instead of DIS_LIBS.
3360 * configure.in: Set BFD_MACHINES based on --with-targets option.
3362 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3364 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3367 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3369 * sparc-opc.c: Change CONST to const to deal with gcc
3370 -Dconst=__const -traditional.
3372 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3374 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3375 coprocessor instructions out of #if 0, and made them use new
3378 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3380 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3382 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3384 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3385 instruction, for use by the disassembler.
3387 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3388 hand-coded sign extensions that depended on 32-bit host ints.
3389 FIXME, we still depend on big-endian host bitfield ordering.
3390 (sparc_print_insn): Set the insn_info_valid field, and the
3391 other fields that describe the instruction being printed.
3393 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3395 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3396 `jmp' instead of just one of them.
3398 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3400 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3401 (fput_fp_reg_r): Renamed from fput_reg_r.
3402 (fput_fp_reg): New function.
3403 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3405 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3407 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3409 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3411 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3413 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3414 don't output a space.
3416 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3418 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3420 * mips-opc.c: New file, containing opcode table from
3421 ../include/opcode/mips.h.
3422 * Makefile.in: Add it.
3424 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3426 * m88k-dis.c: New file, moved in from gdb and changed to use the
3427 new dis-asm.h disassembler interface.
3428 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3429 (m88k-dis.o): New target.
3431 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3433 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3434 argument string const char * to correspond to opcode/mips.h.
3436 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3438 * mips-dis.c: Updated to account for name changes in new version
3440 * Makefile.in: Added header file dependencies.
3442 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3444 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3446 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3448 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3449 extend, rather than shifts.
3451 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3453 * Makefile.in: Undo 15 June change.
3455 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3457 * m68k-dis.c (print_insn_arg): Change return value to byte count
3459 * m68k-dis.c: Re-write to detect invalid operands before
3460 printing anything, so we can handle this the same way we
3461 handle invalid opcodes.
3463 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3465 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3467 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3469 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3472 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3474 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3476 * configure.in: Do make sysdep.h link.
3477 * Makefile.in: Search ../include. Don't search ../bfd.
3479 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3481 Changes from Jeff Law, law@cs.utah.edu:
3482 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3483 Do not print a space before the completers specified by
3486 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3488 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3489 defined, since gdb has been fixed.
3491 Changes from Jeff Law, law@cs.utah.edu:
3492 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3493 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3494 be a *disassemble_info, not a *FILE.
3495 * hppa-dis.c: Support 'd', '!', and 'a'.
3496 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3497 * hppa-dis.c: Delete cases which are no longer needed.
3499 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3501 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3503 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3505 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3508 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3510 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3511 * configure.in: No longer need to configure to get sysdep.h.
3513 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3515 * Patches from Jeffrey Law <law@cs.utah.edu>.
3516 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3517 templates for 1.1 FP computational instructions.
3519 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3521 * h8500-dis.c (print_insn_h8500): Address argument is type
3523 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3526 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3527 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3529 * sparc-dis.c (compare_opcodes): Move static declaration to
3532 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3534 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3535 instruction, remove unimp hack from 'l' argument.
3537 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3539 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3542 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3544 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3545 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3548 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3550 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3551 arrays of string pointers to 2-d arrays of chars, to save
3554 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3556 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3557 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3559 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3561 * hppa-dis.c: New file from Utah, adapted to new disassembler
3563 * Makefile.in: Include it.
3565 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3567 * sh-dis.c, sh-opc.h: New files.
3569 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3571 * alpha-dis.c, alpha-opc.h: New files.
3573 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3575 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3578 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3580 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3582 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3584 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3587 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3589 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3590 and double percent signs a few places.
3592 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3594 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3595 Use info->print_address_func not print_address.
3597 * dis-buf.c (generic_print_address): New function.
3599 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3601 * Makefile.in: Add sparc-dis.c.
3602 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3604 Add `add' instruction to the set that get checked
3605 for a preceding `sethi' in order to print an absolute address.
3606 * (print_insn): Disassembly prefers real instructions.
3607 (is_delayed_branch): Speed up.
3608 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3609 Still missing some float ops, and needs testing.
3610 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3611 F_ALIAS. Use printf, not fprintf, when not passing a file
3613 (compare_opcodes): Check that identical instructions have
3614 identical opcodes, complain otherwise.
3617 * Include reg_names.
3619 Use dis-asm.h/read_memory_func interface.
3621 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3623 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3624 deliberately return non-zero to setjmp from longjmp. Otherwise
3625 this code fails to compile.
3627 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3629 * m68k-dis.c: Fix prototype for fetch_arg().
3631 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3633 * dis-buf.c: New file, for new read_memory_func interface.
3634 Makefile.in (OFILES): Include it.
3635 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3636 Use new read_memory_func interface.
3638 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3640 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3641 * h8500-opc.h: Fix couple of opcodes.
3643 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3645 * Makefile.in: add dvi & installcheck targets
3647 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3649 * Makefile.in: Update for h8500-dis.c.
3651 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3653 * h8500-dis.c, h8500-opc.h: New files
3655 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3657 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3658 ../include/dis-asm.h.
3659 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3660 and ../gdb/m68k-pinsn.c).
3661 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3662 and ../gdb/i386-pinsn.c).
3663 * m68881-ext.c: New file. Moved definition of
3664 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3665 * Makefile.in: Adjust for new files.
3666 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3667 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3668 can be dis-assembled.
3670 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3672 * mips-dis.c (print_insn_arg): Now returns void.
3674 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3676 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3677 files that use the macros.
3679 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3681 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3682 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3683 (CFILES): Added mips-dis.c.
3685 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3687 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3688 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3690 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3692 * Makefile.in: Improve *clean rules.
3693 * configure.in: Allow a default host.
3695 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3697 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3698 files include other sysdep files
3700 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3702 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3704 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3706 * configure.in: For host support, use ../bfd/configure.host
3707 so it stays in sync with the ../bfd/hosts database.
3709 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3711 * configure.in: use cpu-vendor-os triple instead of nested cases
3713 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3715 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3716 *always* the wrong one.
3718 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3720 * z8kgen.c: added copyright info
3722 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3724 * z8k-dis.c (unparse_instr): prettier tabs
3725 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3727 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3729 * configure.in: Add ncr* configuration.
3730 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3731 picayune ANSI compilers happy.
3733 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3735 * configure.in (i386): Make i386 and i486 synonymous for now.
3736 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3738 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3740 * Makefile.in (install): Fix typo.
3742 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3744 * Makefile.in (make): Remove obsolete crud.
3745 (sparc-opc.o): Avoid Sun Make VPATH bug.
3747 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3749 * Makefile.in: since there are no SUBDIRS, remove rule and
3750 references of subdir_do.
3752 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3754 * Makefile.in (install): Get the library name right here too.
3755 Don't install bfd.h, since it's unrelated to this library. No
3756 subdirs to recurse into, either.
3757 (CFILES): The source file has a .c suffix, not .o.
3759 * sparc-opc.c: New file, moved from BFD.
3760 * Makefile.in (OFILES): Build it.
3762 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3764 * z8k-dis.c: fixed forward refferences of some declarations.
3766 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3768 * Makefile.in: get the name of the library right
3770 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3772 * z8k-dis.c: knows how to disassemble z8k stuff
3773 * z8k-opc.h: new file full of z8000 opcodes
3777 version-control: never
projects / external / binutils.git / blob