2 Mon Dec 22 17:17:03 1997 Doug Evans <devans@canuck.cygnus.com>
4 * configure.in: Add txvu support.
5 * configure: Regenerate.
6 * disassemble.c: Add txvu support.
9 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
11 * mips-opc.c: Add FP_D to s.d instruction flags.
13 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
15 * m68k-opc.c (halt, pulse): Enable them on the 68060.
18 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
20 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
21 PC relative offset forms before the 15 bit forms. An assembler command
22 line option now chooses the default.
26 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
28 * mips-opc.c: Add many missing r5900 instructions.
32 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
34 * d30v-opc.c (d30v_opcode_table): Set new flags bits
35 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
38 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
40 * configure: Only build libopcodes shared if --enable-shared's value
41 was `yes', or was set to `*opcodes*'.
42 * aclocal.m4: Likewise.
43 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
44 original source of this bit of code. It's not clear what the best fix
48 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
50 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
53 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
55 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
56 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
57 offset forms before the 15 bit forms, to default to the long forms.
60 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
62 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
64 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
66 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
67 symbol if none is present.
68 (print_insn_big_arm): Prevent examination of stored symbol if
71 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
73 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
75 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
77 * disassemble.c: Remove disasm_symaddr() function.
79 * arm-dis.c: Use info->symbol instead of info->flags to determine
80 if disassmbly should be in Thumb or Arm mode.
82 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
84 * arm-dis.c: Add support for disassembling Thumb opcodes.
85 (print_insn_thumb): New function.
87 * disassemble.c (disasm_symaddr): New function.
89 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
90 (thumb_opcodes): Table of Thumb opcodes.
92 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
94 * m68k-opc.c (btst): Change Dd@s to Dd;b.
96 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
97 and 'v' as operand types.
99 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
101 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
102 <olivier.carmona@di.epfl.ch>.
103 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
104 which has a two word opcode with a one word argument.
107 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
109 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
110 unsigned, not signed.
111 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
115 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
117 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
118 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
119 (ftrv): Slay the cut-and-paste monster.
122 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
124 * d10v-dis.c (print_operand):
125 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
127 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
129 * d10v-opc.c (OPERAND_FLAG): Split into:
130 (OPERAND_FFLAG, OPERAND_CFLAG) .
134 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
136 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
137 field for all INSN_MACRO's.
140 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
142 * mips-opc.c (sync,cache): These are 3900 insns.
144 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
146 sh-opc.h (sh_table): Remove ftst/nan.
148 start-sanitize-vr5400
149 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
151 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
152 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
154 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
158 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
160 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
161 Add tx49 insns and configury.
164 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
166 * mips-opc.c (ffc, ffs): Fix mask.
169 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
171 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
175 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
177 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
178 start-sanitize-vr5400
179 Added VR5400 instructions.
180 (N5): New cpu-id macro.
182 (WR_HILO, RD_HILO, MOD_HILO): New macros.
184 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
186 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
187 (WR_HILO, RD_HILO, MOD_HILO): New macros.
189 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
191 * v850-dis.c (disassemble): Replace // with /* ... */
193 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
195 * sparc-opc.c: Add wr & rd for v9a asr's.
196 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
197 (v9a_asr_reg_names): New variable.
198 Patch from David Miller <davem@vger.rutgers.edu>.
200 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
202 * sparc-opc.c (v9notv9a): New insn type.
203 (IMPDEP): Move to the end to not conflict with edge8 et al.
204 Patch from David Miller <davem@vger.rutgers.edu>.
206 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
208 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
210 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
212 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
214 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
216 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
217 of disassemble_info structure to determine if an overlay address
218 has a matching symbol in low memory.
220 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
221 new symbol_at_address_func field in disassemble_info structure.
223 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
225 * v850-opc.c (extract_d22): Use signed arithmatic.
227 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
229 * mips-opc.c: Three op mult is not an ISA insn.
231 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
233 * mips-opc.c: Fix formatting.
235 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
237 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
238 than assuming that char is signed. Explicitly sign extend 16 bit
239 values, rather than assuming that short is 16 bits.
240 (OP_sI, OP_J, OP_DIR): Likewise.
243 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
245 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
249 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
251 * v850-opc.c: Fix typo in comment.
253 * v850-dis.c (disassemble): Add test of processor type when
256 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
258 * configure.in: Use a diversion to set enable_shared before the
259 arguments are parsed.
260 * configure: Rebuild.
262 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
264 * m68k-opc.c (TBL1): Use ! rather than `.
265 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
267 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
269 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
271 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
273 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
276 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
277 * aclocal.m4: Rebuild with new libtool.
278 * configure: Rebuild.
281 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
283 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
286 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
288 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
290 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
292 * v850-opc.c (v850_opcodes): Further rearrangements.
295 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
297 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
300 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
302 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
305 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
307 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
309 * mips16-opc.c: Added mips16 sdbbp.
312 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
314 * v850-opc.c: Initialise processors field of v850_opcode structure.
317 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
319 Merge changes from Martin Hunt:
321 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
323 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
324 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
325 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
327 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
329 * d30v-dis.c (print_insn): First operand of d*i (delayed
330 branch) instructions is relative.
332 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
333 (d30v_operand_table): Add IMM6S3 type.
334 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
336 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
337 and cmp instructions.
339 * d30v-opc.c: Correct entries for repeat*, and sat*.
340 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
341 types. Correct several formats.
343 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
345 * d30v-opc.c (pre_defined_registers): Change control registers.
347 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
348 SHORT_C2. Manual was incorrect.
350 * d30v-dis.c (lookup_opcode): Return value now indicates
351 if an opcode has a short and a long form. Used for deciding
352 to append a ".s" or ".l".
353 (print_insn): Append a ".s" to an instruction if it is
354 the short form and ".l" if it is a long form. Do not append
355 anything if the instruction has only one possible size.
357 * d30v-opc.c: Change mulx2h to require an even register.
358 New form: SHORT_A2; a SHORT_A form that needs an even
359 register as the first operand.
361 * d30v-dis.c (print_insn_d30v): Fix problem where the last
362 instruction was not being disassembled if there were an odd
363 number of instructions.
365 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
369 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
371 * v850-dis.c (disassemble): Improved display of register lists.
374 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
376 * sparc-opc.c (sparc_opcodes): Fix assembler args to
377 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
378 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
379 fandnot1s, fandnot2s.
381 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
383 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
385 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
387 * cgen-asm.c (cgen_parse_address): New argument resultp.
389 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
391 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
393 * mn10200-dis.c (disassemble): PC relative instructions are
394 relative to the next instruction, not the current instruction.
396 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
398 * v850-dis.c (disassemble): Only signed extend values that are not
399 returned by extract functions.
400 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
402 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
404 * v850-opc.c: Update comments. Remove use of
405 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
407 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
409 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
411 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
413 * configure: Rebuilt with latest devo autoconf for NT support.
415 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
417 * v850-dis.c (disassemble): Use curly brace syntax for register
420 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
421 where r0 is being used as a destination register.
424 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
426 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
430 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
432 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
433 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
434 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
435 Add insns to access SGR and DBR.
436 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
439 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
441 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
444 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
446 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
447 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
450 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
452 * configure (cgen_files): Add support for v850e target.
453 * configure.in (cgen_files): Add support for v850e target.
455 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
457 * configure (cgen_files): Add support for v850ea target.
458 * configure.in (cgen_files): Add support for v850ea target.
461 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
463 * configure.in (bfd_arc_arch): Add.
464 * configure: Rebuild.
465 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
466 * Makefile.in: Rebuild.
467 * arc-dis.c, arc-opc.c: New files.
468 * disassemble.c (ARCH_all): Define ARCH_arc.
469 (disassembler): Add ARC support.
471 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
474 * v850-dis.c (disassemble): Add support for v850EA instructions.
476 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
477 (v850_opcodes): Add v850EA instructions.
479 * v850-dis.c (disassemble): Add support for v850E instructions.
481 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
482 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
483 insert_spe, extract_spe): New Functions.
484 (v850_opcodes): Add v850E instructions.
487 * v850-opc.c: Reorganised and re-layed out to improve readability
490 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
492 * configure: Rebuild with autoconf 2.12.1.
494 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
496 * aclocal.m4, configure: Rebuild with new automake patches.
498 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
500 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
501 * acinclude.m4: Just include acinclude.m4 from BFD.
502 * aclocal.m4, configure: Rebuild.
504 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
506 * Makefile.am: New file, based on old Makefile.in.
507 * acconfig.h: New file.
508 * acinclude.m4: New file.
509 * stamp-h.in: New file.
510 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
511 Removed shared library handling; now handled by libtool. Replace
512 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
513 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
514 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
515 handling in AC_OUTPUT.
516 * dep-in.sed: Change .o to .lo.
517 * Makefile.in: Now built with automake.
518 * aclocal.m4: Now built with aclocal.
519 * config.in, configure: Rebuild.
521 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
523 * mips-opc.c: Fix typo/thinko in "eret" instruction.
526 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
528 * mips-opc.c: Fix coding of mtsa.
531 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
533 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
535 * sparc-dis.c (sorted_opcodes): New static local.
536 (struct opcode_hash): `opcode' is pointer to const element.
537 (build_hash): First arg is now table of sorted pointers.
538 (print_insn_sparc): Sort opcodes by sorting table of pointers.
539 (compare_opcodes): Update.
541 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
543 * cgen-opc.c: #include <ctype.h>.
544 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
545 Handle case insensitive hashing.
546 (hash_keyword_value): Change type of `value' to unsigned int.
548 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
550 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
551 precision FP, mark it as such. Likewise for double precision
552 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
555 (mips_builtin_opcodes): Remove non-existant r5900 instructions
559 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
561 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
562 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
565 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
567 * ppc-opc.c (extract_nsi): make unsigned expression signed before
569 (UNUSED): remove one level of parens, so MSVC doesn't choke on
570 nesting depth when all the macros are expanded.
572 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
574 * sparc-opc.c: The fcmp v9a instructions take an integer register
575 as a destination, not a floating point register. From Christian
576 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
578 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
580 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
581 syntax. From Roman Hodek
582 <rnhodek@faui22c.informatik.uni-erlangen.de>.
584 * i386-dis.c (twobyte_has_modrm): Fix pand.
586 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
588 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
590 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
592 * arm-dis.c: Add prototypes for arm_decode_shift and
595 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
597 * mips-opc.c: Add r3900 insns.
599 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
601 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
602 print delay slot instructions on the same line. When using a PC
603 relative load, add a comment with the value being loaded if it can
606 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
608 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
609 to pushS/popS for segment regs and byte constant so that
610 pushw/popw printed when in 16 bit data mode.
612 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
613 print cbtw, cwtd in 16 bit data mode.
614 * i386-dis.c (putop): extra case W to support above.
616 * i386-dis.c (print_insn_x86): print addr32 prefix when given
617 address size prefix in 16 bit address mode.
619 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
621 * sh-dis.c: Reindent. Rename local variable fprintf to
624 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
626 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
628 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
630 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
632 * mips16-opc.c (mip16_opcodes): same.
634 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
636 * m68k-opc.c (moveb): Change $d to %d.
638 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
640 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
641 (twobyte_has_modrm): Likewise.
643 (OP_MMX, OP_EM, OP_MS): New static functions.
645 * i386-dis.c: Revert patch of April 4. The output now matches
648 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
650 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
653 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
655 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
657 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
659 * Makefile.in (install): Depend upon installdirs.
660 (installdirs): New target.
662 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
664 From Thomas Graichen <graichen@rzpd.de>:
665 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
666 * configure: Rebuild.
668 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
670 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
671 Delete string{,s}.h support.
673 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
675 * cgen-asm.c (cgen_parse_operand_fn): New global.
676 (cgen_parse_{{,un}signed_integer,address}): Update call to
677 cgen_parse_operand_fn.
678 (cgen_init_parse_operand): New function.
679 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
680 from cgen_asm_init_parse.
681 (m32r_cgen_assemble_insn): New operand `errmsg'.
682 Delete call to as_bad, return error message to caller.
683 (m32r_cgen_asm_hash_keywords): #if 0 out.
685 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
687 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
689 [case 'J']: Fix typo in register name.
691 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
693 * configure.in: Substitute SHLIB_LIBS.
694 * configure: Rebuild.
695 * Makefile.in (SHLIB_LIBS): New variable.
696 ($(SHLIB)): Use $(SHLIB_LIBS).
698 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
700 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
702 * cgen-opc.c (hash_keyword_name): Improve algorithm.
704 * disassemble.c (disassembler): Handle m32r.
706 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
708 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
709 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
710 * Makefile.in (CFILES): Add them.
711 (ALL_MACHINES): Add them.
712 (dependencies): Regenerate.
713 * configure.in (cgen_files): New variable.
714 (bfd_m32r_arch): Add entry.
715 * configure: Regenerate.
717 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
719 * configure.in: Correct file names for bfd_mn10[23]00_arch.
720 * configure: Rebuild.
722 * Makefile.in: Rebuild dependencies.
724 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
726 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
729 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
731 * Branched binutils 2.8.
733 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
735 * m10200-dis.c: Rename from mn10200-dis.c.
736 * m10200-opc.c: Rename from mn10200-opc.c.
737 * m10300-dis.c: Rename from mn10300-dis.c
738 * m10300-opc.c: Rename from mn10300-opc.c.
739 * Makefile.in: Update accordingly.
741 * mips16-opc.c: Add mul and dmul macros.
743 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
745 * makefile.vms: Update CFLAGS, add clean target.
747 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
749 * mips-opc.c: Add "wait". From Ralf Baechle
750 <ralf@gnu.ai.mit.edu>.
752 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
753 * configure, config.in: Rebuild.
754 * sysdep.h: Include <stdlib.h> if it exists.
755 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
757 * Makefile.in: Rebuild dependencies.
759 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
761 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
762 Andrew Bray <andy@madhouse.demon.co.uk>.
764 * mips-opc.c: Add cast when setting mips_opcodes.
766 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
768 * v850-dis.c (disassemble): Fix sign extension problem.
769 * v850-opc.c (extract_d*): Fix sign extension problems to make
770 disassembly calculate branch offsets correctly.
772 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
774 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
776 * mips-opc.c: Add dctr and dctw.
779 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
781 * d30v-dis.c (print_insn): Change the way signed constants
784 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
786 * Makefile.in (BFD_H): New variable.
787 (HFILES): New variable.
788 (CFILES): Add all C files.
789 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
790 Delete old dependencies, and build new ones.
791 * dep-in.sed: New file.
793 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
795 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
797 start-sanitize-coldfire
798 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
800 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
803 end-sanitize-coldfire
804 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
806 * mn10200-opc.c: Change "trap" to "syscall".
807 * mn10300-opc.c: Add new "syscall" instruction.
809 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
811 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
812 mulul insns on the coldfire.
814 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
816 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
817 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
818 (print_insn_little_arm): Likewise.
820 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
822 Based on patches from H.J. Lu <hjl@lucon.org>:
823 * i386-dis.c (fetch_data): Add prototype.
824 * m68k-dis.c (fetch_data): Add prototype.
825 (dummy_print_address): Add prototype. Make static.
826 * ppc-opc.c (valid_bo): Add prototype.
827 * sparc-dis.c (build_hash_table): Add prototype.
828 (is_delayed_branch, compute_arch_mask): Add prototypes.
829 (print_insn_sparc): Make several local variables const.
830 (compare_opcodes): Change arguments to const PTR. Add prototype.
831 * sparc-opc.c (arg): Change name field to be const.
832 (lookup_name, lookup_value): Add prototypes. Change table and
833 name parameters to be const.
834 (sparc_encode_asi): Change name parameter to be const.
835 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
836 (sparc_encode_sparclet_cpreg): Likewise.
837 (sparc_decode_asi): Change return type to be const.
838 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
839 (sparc_decode_sparclet_cpreg): Likewise.
841 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
843 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
844 Solaris doesn't like the combined options, and the -f is
846 (stamp-tshlink, install): Likewise.
848 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
850 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
853 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
855 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
857 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
859 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
862 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
864 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
867 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
869 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
871 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
873 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
876 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
878 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
879 floatformat_to_double to make portable.
880 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
883 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
885 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
886 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
888 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
890 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
891 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
894 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
896 * tic80-opc.c (LSI_SCALED): Renamed from this ...
897 (OFF_SL_BR_SCALED): ... to this, and added the flag
898 TIC80_OPERAND_BASEREL to the flags word.
899 (tic80_opcodes): Replace all occurances of LSI_SCALED with
903 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
905 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
906 Change mips_opcodes from const array to a pointer,
907 and change bfd_mips_num_opcodes from const int to int,
908 so that we can increase the size of the mips opcodes table
912 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
914 * tic80-opc.c (tic80_predefined_symbols): Revert change to
915 store BITNUM values in the table in one's complement form
916 to match behavior when assembler is given a raw numeric
917 value for a BITNUM operand.
918 * tic80-dis.c (print_operand_bitnum): Ditto.
922 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
924 * d30v-opc.c: Removed references to FLAG_X.
927 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
929 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
932 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
934 * Makefile.in: Added d30v object files.
935 * configure: (bfd_d30v_arch) Rebuilt.
936 * configure.in: (bfd_d30v_arch) Added new case.
937 * d30v-dis.c: New file.
938 * d30v-opc.c: New file.
939 * disassemble.c (disassembler) Add entry for d30v.
943 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
945 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
946 representations for the floating point BITNUM values.
948 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
950 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
951 in the table in one's complement form, as they appear in the
953 (tic80_symbol_to_value): Use macros to access predefined
955 (tic80_value_to_symbol): Ditto.
956 (tic80_next_predefined_symbol): New function.
957 * tic80-dis.c (print_operand_bitnum): Remove code that did
958 one's complement for BITNUM values.
962 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
964 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
967 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
969 * makefile.vms: Remove 8 bit characters. Update to latest
972 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
974 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
976 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
978 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
979 (IMM24_PCREL): Likewise.
981 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
983 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
984 address for an extended PC relative instruction that is not a
987 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
989 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
993 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
995 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
996 (tic80_opcodes): Sort entries so that long immediate forms
997 come after short immediate forms, making it easier for
998 assembler to select the right one for a given operand.
1001 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1003 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1005 (print_insn_mips16): Likewise.
1007 start-sanitize-r5900
1008 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1010 * mips-opc.c: add r5900.
1013 start-sanitize-tic80
1014 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1016 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1017 a symbol class that restricts translation to just that
1018 class (general register, condition code, etc).
1020 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1022 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1023 and REG_DEST_E for register operands that have to be
1024 an even numbered register. Add REG_FPA for operands that
1025 are one of the floating point accumulator registers.
1026 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1027 (tic80_opcodes): Change entries that need even numbered
1028 register operands to use the new operand table entries.
1029 Add "or" entries that are identical to "or.tt" entries.
1032 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1034 * mips16-opc.c: Add new cases of exit instruction for
1036 * mips-dis.c (print_mips16_insn_arg): Display floating point
1037 registers in operands of exit instruction. Print `$' before
1038 register names in operands of entry and exit instructions.
1040 start-sanitize-tic80
1041 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1043 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1044 pairs for all predefined symbols recognized by the assembler.
1045 Also used by the disassembling routines.
1046 (tic80_symbol_to_value): New function.
1047 (tic80_value_to_symbol): New function.
1048 * tic80-dis.c (print_operand_control_register,
1049 print_operand_condition_code, print_operand_bitnum):
1050 Remove private tables and use tic80_value_to_symbol function.
1053 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1055 * d10v-dis.c (print_operand): Change address printing
1056 to correctly handle PC wrapping. Fixes PR11490.
1058 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1060 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1063 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1065 * mips-dis.c (print_insn_mips16): Set insn_info information.
1066 (print_mips16_insn_arg): Likewise.
1068 * mips-dis.c (print_insn_mips16): Better handling of an extend
1069 opcode followed by an instruction which can not be extended.
1071 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1073 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1074 coldfire moveb instruction to not allow an address register as
1075 destination. Although the documentation does not indicate that
1076 this is invalid, experiments uncovered unexpected behavior.
1077 Added a comment explaining the situation. Thanks to Andreas
1078 Schwab for pointing this out to me.
1080 start-sanitize-tic80
1081 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1083 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1084 entries are presorted so that entries with the same mnemonic are
1085 adjacent to each other in the table. Sort the entries for each
1086 instruction so that this is true.
1089 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1091 * m68k-dis.c: Include <libiberty.h>.
1092 (print_insn_m68k): Sort the opcode table on the most significant
1093 nibble of the opcode.
1095 start-sanitize-tic80
1096 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1098 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1099 "vsub", "vst", "xnor", and "xor" instructions.
1100 (V_a1): Renamed from V_a, msb of accumulator reg number.
1101 (V_a0): Add macro, lsb of accumulator reg number.
1103 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1105 * tic80-dis.c (print_insn_tic80): Broke excessively long
1106 function up into several smaller ones and arranged for
1107 the instruction printing function to be callable recursively
1108 to print vector instructions that have both a load and a
1109 math instruction packed into a single opcode.
1110 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1111 to explain why it comes after the other vector opcodes.
1114 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1116 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1117 move insns to handle immediate operands.
1119 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1121 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1122 fix operand mask in the "moveml" entries for the coldfire.
1124 start-sanitize-tic80
1125 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1127 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1128 New macros for building vector instruction opcodes.
1129 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1130 FMT_LI, which were unused. The field is now a flags field.
1131 Remove some opcodes that are possible, but illegal, such
1132 as long immediate instructions with doubles for immediate
1133 values. Add "vadd" and "vld" instructions.
1135 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1137 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1138 the order more logical. Move the shift alias instructions ("rotl",
1139 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1140 interspersed with the regular sr.x and sl.x instructions. Add
1141 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1142 "sub", "subu", "swcr", and "trap".
1144 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1146 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1147 (OFF_SL_PC): Renamed from OFF_SL.
1148 (OFF_SS_BR): New operand type for base relative operand.
1149 (OFF_SL_BR): New operand type for base relative operand.
1150 (REG_BASE): New operand type for base register operand.
1151 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1152 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1153 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1155 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1156 10 char field, padded with spaces on rhs, rather than a string
1157 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1158 than old TIC80_OPERAND_RELATIVE. Add support for new
1159 TIC80_OPERAND_BASEREL flag bit.
1161 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1163 * tic80-dis.c (print_insn_tic80): Print floating point operands
1165 * tic80-opc.c (SPFI): Add single precision floating point
1166 immediate operand type.
1167 (ROTATE): Add rotate operand type for shifts.
1168 (ENDMASK): Add for shifts.
1169 (n): Macro for the 'n' bit.
1170 (i): Macro for the 'i' bit.
1171 (PD): Macro for the 'PD' field.
1172 (P2): Macro for the 'P2' field.
1173 (P1): Macro for the 'P1' field.
1174 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1178 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1180 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1181 adding in current address for pc-relative operands.
1183 start-sanitize-tic80
1184 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1186 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1187 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1188 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1189 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1190 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1191 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1192 (REG_SCALED, LSI_SCALED): New operand types.
1193 (E): New macro for 'E' bit at bit 27.
1194 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1195 opcodes, including the various size flavors (b,h,w,d) for
1196 the direct load and store instructions.
1198 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1200 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1202 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1203 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1204 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1205 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1206 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1207 masks with "MASK_* & ~M_*" to get the M bit reset.
1208 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1210 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1212 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1213 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1214 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1216 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1217 CC, SICR, and LICR table entries.
1218 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1219 "bcnd", and "brcr" opcodes.
1222 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1224 * ppc-opc.c (powerpc_operands): Make comment match the
1225 actual fields (no shift field).
1226 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1227 start-sanitize-tic80
1228 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1229 partial implementation, work in progress.
1230 * tic80-opc.c (tic80_operands): Begin construction operands table.
1231 (tic80_opcodes): Continue populating opcodes table and start
1232 filling in the operand indices.
1233 (tic80_num_opcodes): Add this.
1236 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1238 * m68k-opc.c: Add #B case for moveq.
1240 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1242 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1243 before they are used.
1245 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1247 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1248 for "breakpoint" instruction.
1250 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1252 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1253 (dep): Use ALL_CFLAGS rather than CFLAGS.
1255 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1257 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1260 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1262 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1263 start-sanitize-tic80
1264 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1267 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1269 * mips16-opc.c: Add "abs".
1271 start-sanitize-tic80
1272 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1274 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1275 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1276 (disassembler): Add bfd_arch_tic80 support to set disassemble
1277 to print_insn_tic80.
1278 * tic80-dis.c (print_insn_tic80): Add stub.
1280 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1282 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1283 * configure: Regenerate with autoconf.
1284 * tic80-dis.c: Add file.
1285 * tic80-opc.c: Add file.
1288 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1290 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1292 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1294 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1295 (mn10200_opcodes): Use it for some logicals and btst insns.
1296 Add "break" and "trap" instructions.
1298 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1300 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1302 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1304 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1305 relative load or add now depends upon whether the instruction is
1308 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1310 * mn10200-dis.c: Finish writing disassembler.
1311 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1312 Fix mask for "jmp (an)".
1314 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1315 handle endianness issues for mn10300.
1317 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1319 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1321 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1322 instruction. Fix opcode field for "movb (imm24),dn".
1324 * mn10200-opc.c (mn10200_operands): Fix insertion position
1327 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1329 * mn10200-opc.c: Create mn10200 opcode table.
1330 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1331 but moving along nicely.
1333 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1335 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1337 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1339 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1340 specifiers for fmovem* instructions.
1342 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1344 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1346 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1348 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1351 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1353 * mn10300-opc.c: Add some comments explaining the various
1356 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1358 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1360 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1363 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1364 operand specifiers in fmovm* instructions.
1366 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1368 * ppc-opc.c (insert_li): Give an error if the offset has the two
1369 least significant bits set.
1371 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1373 * mips-dis.c (print_insn_mips16): Separate the instruction from
1374 the arguments with a tab, not a space.
1376 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1378 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1381 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1384 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1386 * configure: Rebuild with autoconf 2.12.
1388 Add support for mips16 (16 bit MIPS implementation):
1389 * mips16-opc.c: New file.
1390 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1391 (mips16_reg_names): New static array.
1392 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1393 after seeing a 16 bit symbol.
1394 (print_insn_little_mips): Likewise.
1395 (print_insn_mips16): New static function.
1396 (print_mips16_insn_arg): New static function.
1397 * mips-opc.c: Add jalx instruction.
1398 * Makefile.in (mips16-opc.o): New target.
1399 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1400 * configure: Rebuild.
1402 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1404 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1405 operand specifiers in *save, *restore and movem* instructions.
1407 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1410 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1411 register operands for immediate arithmetic, not, neg, negx, and
1412 set according to condition instructions.
1414 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1415 specifier of the effective-address operand in immediate forms of
1416 arithmetic instructions. The specifier for the immediate operand
1417 notes how and where the constant will be stored.
1419 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1421 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1424 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1427 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1429 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1431 * mn10300-dis.c (disassemble): Handle register lists.
1433 * mn10300-opc.c: Fix handling of register list operand for
1434 "call", "ret", and "rets" instructions.
1436 * mn10300-dis.c (disassemble): Print PC-relative and memory
1437 addresses symbolically if possible.
1438 * mn10300-opc.c: Distinguish between absolute memory addresses,
1439 pc-relative offsets & random immediates.
1441 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1443 (disassemble): Handle SPLIT and EXTENDED operands.
1445 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1447 * mn10300-dis.c: Rough cut at printing some operands.
1449 * mn10300-dis.c: Start working on disassembler support.
1450 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1452 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1454 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1456 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1458 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1460 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1462 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1463 register argument is calls and jmp instructions.
1465 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1467 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1468 getx operand. Fix opcode for mulqu imm,dn.
1470 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1472 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1473 in MN10300_OPERAND_SPLIT operands for how many bits
1474 appear in the basic insn word. Add IMM32_HIGH24,
1475 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1476 (mn10300_opcodes): Use new operands as needed.
1478 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1479 for bset, bclr, btst instructions.
1480 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1482 * mn10300-opc.c (mn10300_operands): Remove many redundant
1483 operands. Update opcode table as appropriate.
1484 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1485 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1487 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1489 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1490 operands (for indexed load/stores). Fix bitpos for DI
1491 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1492 few instructions that insert immediates/displacements in the
1493 middle of the instruction. Add IMM8E for 8 bit immediate in
1494 the extended part of an instruction.
1495 (mn10300_operands): Use new opcodes as appropriate.
1497 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1499 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1500 sequential so the assembler never parallelizes it with
1503 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1505 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1506 a data/address register that appears in register field 0
1507 and register field 1.
1508 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1510 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1512 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1513 standard disassembly.
1515 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1516 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1517 Recategorize PALcode instructions.
1519 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1521 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1523 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1525 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1526 there are no operand types.
1528 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1530 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1532 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1534 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1536 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1538 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1540 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1541 and sst.w instructions.
1543 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1546 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1548 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1551 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1553 * ppc-opc.c (PPCPWR2): Define.
1554 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1557 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1559 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1560 field for movhu instruction.
1562 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1563 cast value to "long" not "signed long" to keep hpux10
1566 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1568 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1571 * mn10300-opc.c (FMT*): Remove definitions.
1573 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1574 for shift-by-register opcodes.
1576 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1577 into [AD][MN][01] for encoding the position of the register
1580 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1582 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1583 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1585 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1587 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1588 Fix various typos. Add "PAREN" operand.
1589 (MEM, MEM2): Define.
1590 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1591 operands. Fix several typos.
1593 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1596 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1598 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1599 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1601 (mn10300_opcodes): Break opcode format out into its own field.
1602 Update many operand fields to deal with signed vs unsigned
1603 issues. Fix one or two typos in the "mov" instruction
1604 opcode, mask and/or operand fields.
1606 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1608 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1609 m68851 wasn't reset.
1611 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1613 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1614 all opcodes. Very rough cut at operands for all opcodes.
1616 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1619 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1621 * mn10200-opc.c, mn10300-opc.c: New files.
1622 * mn10200-dis.c, mn10300-dis.c: New files.
1623 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1624 * disassemble.c: Break mn10x00 support into 10200 and 10300
1626 * configure.in: Likewise.
1627 * configure: Rebuilt.
1629 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1631 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1633 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1635 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1637 * disassemble (ARCH_mn10x00): Define.
1638 (disassembler): Handle bfd_arch_mn10x00.
1639 * configure.in: Recognize bfd_mn10x00_arch.
1640 * configure: Rebuilt.
1642 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1644 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1645 accordingly. Don't declare functions using op_rtn.
1647 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1649 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1650 params to be more standard.
1651 * (disassemble): Print absolute addresses and symbolic names for
1652 branch and jump targets.
1653 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1655 * (v850_opcodes): Add breakpoint insn.
1657 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1659 * m68k-opc.c: Move the fmovemx data register cases before the
1660 other cases, so that they get recognized before the data register
1661 does gets treated as a degenerate register list.
1663 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1665 * mips-opc.c: Add a case for "div" and "divu" with two registers
1666 and a destination of $0.
1668 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1670 * mips-dis.c (print_insn_arg): Add prototype.
1671 (_print_insn_mips): Ditto.
1673 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1675 * mips-dis.c (print_insn_arg): Print condition code registers as
1678 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1680 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1682 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1684 * v850-dis.c (disassemble): Make static. Provide prototype.
1686 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1688 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1691 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1693 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1694 ']' characters into the output stream.
1695 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1696 Add "memop" field to all opcodes (for the disassembler).
1697 Reorder opcodes so that "nop" comes before "mov" and "jr"
1698 comes before "jarl".
1700 * v850-dis.c (print_insn_v850): Fix typo in last change.
1702 * v850-dis.c (print_insn_v850): Properly handle disassembling
1703 a two byte insn at the end of a memory region when the memory
1704 region's size is only two byte aligned.
1706 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1708 * v850-dis.c (v850_reg_names): Define.
1709 (v850_sreg_names, v850_cc_names): Likewise.
1710 (disassemble): Very rough cut at printing operands (unformatted).
1712 * v850-opc.c (BOP_MASK): Fix.
1713 (v850_opcodes): Fix mask for jarl and jr.
1715 * v850-dis.c: New file. Skeleton for disassembler support.
1716 * Makefile.in Remove v850 references, they're not needed here.
1717 * configure.in: Add v850-dis.o when building v850 toolchains.
1718 * configure: Rebuilt.
1719 * disassemble.c (disassembler): Call v850 disassembler.
1721 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1722 (insert_d8_6, extract_d8_6): New functions.
1723 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1724 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1726 (IF4A, IF4B): Use "D7" instead of "D7S".
1727 (IF4C, IF4D): Use "D8_7" instead of "D8".
1728 (IF4E, IF4F): New. Use "D8_6".
1729 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1730 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1732 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1733 (v850_operands): Change D16 to D16_15, use special insert/extract
1734 routines. New new D16 that uses the generic insert/extract code.
1735 (IF7A, IF7B): Use D16_15.
1736 (IF7C, IF7D): New. Use D16.
1737 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1739 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1740 message. Issue an error if the branch offset is odd.
1742 * v850-opc.c: Add notes about needing special insert/extract
1743 for all the load/store insns, except "ld.b" and "st.b".
1745 * v850-opc.c (insert_d22, extract_d22): New functions.
1746 (v850_operands): Use insert_d22 and extract_d22 for
1748 (insert_d9): Fix range check.
1750 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1752 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1753 and set bits field to D9 and D22 operands.
1755 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1757 * v850-opc.c (v850_operands): Define SR2 operand.
1758 (v850_opcodes): "ldsr" uses R1,SR2.
1760 * v850-opc.c (v850_opcodes): Fix opcode specs for
1761 sld.w, sst.b, sst.h, sst.w, and nop.
1763 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1765 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1766 end of the opcode table.
1768 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1770 * d10v-opc.c (pre_defined_registers): Added register pairs,
1771 "r0-r1", "r2-r3", etc.
1773 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1775 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1776 Create I16U for an unsigned 16bit mmediate operand.
1777 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1779 * v850-opc.c (v850_operands): Define EP operand.
1780 (IF4A, IF4B, IF4C, IF4D): Use EP.
1782 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1783 with immediate operand, "movhi". Tweak "ldsr".
1785 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1786 correct. Get sld.[bhw] and sst.[bhw] closer.
1788 * v850-opc.c (v850_operands): "not" is a two byte insn
1790 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1792 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1794 * v850-opc.c (two): Get order of words correct.
1796 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1798 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1799 register source and destination operands.
1800 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1802 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1803 same thinko in "trap" opcode.
1805 * v850-opc.c (v850_opcodes): Add initializer for size field
1808 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1809 Add D8 for 8-bit unsigned field in short load/store insns.
1810 (IF4A, IF4D): These both need two registers.
1811 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1812 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1813 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1814 for "ldsr" and "stsr".
1815 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1818 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1819 short store word (sst.w).
1821 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1823 * v850-opc.c (v850_operands): Added insert and extract fields,
1824 pointers to functions that handle unusual operand encodings.
1826 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1828 * v850-opc.c (v850_opcodes): Enable "trap".
1830 * v850-opc.c (v850_opcodes): Fix order of displacement
1831 and register for "set1", "clr1", "not1", and "tst1".
1833 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1835 * v850-opc.c (v850_operands): Add "B3" support.
1836 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1839 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1841 * v850-opc.c: Close unterminated comment.
1843 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1845 * v850-opc.c (v850_operands): Add flags field.
1846 (v850_opcodes): add move opcodes.
1848 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1850 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1851 * configure: (bfd_v850v_arch) Add new case.
1852 * configure.in: (bfd_v850_arch) Add new case.
1853 * v850-opc.c: New file.
1855 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1857 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1859 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1861 * d10v-opc.c: Add additional information to the opcode
1862 table to help determinine which instructions can be done
1865 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1867 * mpw-make.sed: Update editing of include pathnames to be
1870 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1872 * arm-opc.h: Added "bx" instruction definition.
1874 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1876 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1878 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1880 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1882 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1884 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1886 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1888 * makefile.vms: Update for alpha-opc changes.
1890 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1892 * i386-dis.c (print_insn_i386): Actually return the correct value.
1893 (ONE, OP_ONE): #ifdef out; not used.
1895 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1897 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1898 Changed subi operand type to treat 0 as 16.
1900 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1902 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1905 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1907 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1908 memory transfer instructions. Add new format string entries %h and %s.
1909 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1912 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1914 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1915 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1917 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1919 * alpha-dis.c (print_insn_alpha_osf): Remove.
1920 (print_insn_alpha_vms): Remove.
1921 (print_insn_alpha): Make globally visible. Chose the register
1922 names based on info->flavour.
1923 * disassemble.c: Always return print_insn_alpha for the alpha.
1925 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1927 * d10v-dis.c (dis_long): Handle unknown opcodes.
1929 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1931 * d10v-opc.c: Changes to support signed and unsigned numbers.
1932 All instructions with the same name that have long and short forms
1933 now end in ".l" or ".s". Divs added.
1934 * d10v-dis.c: Changes to support signed and unsigned numbers.
1936 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1938 * d10v-dis.c: Change all functions to use info->print_address_func.
1940 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1942 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1943 move ccr/sr insns more strict so that the disassembler only
1944 selects them when the addressing mode is data register.
1946 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1947 * d10v-opc.c (pre_defined_registers): Declare.
1948 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1949 to pick a better name for the registers.
1951 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1953 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1954 operands for fexpand and fpmerge. From Christian Kuehnke
1955 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1957 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1959 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1960 print routine. Take new regnames and cpumask arguments.
1961 Kill the environment variable nonsense.
1962 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1963 (print_insn_alpha_vms): New function. Do VMS style regnames.
1964 * disassemble.c (disassembler): Test bfd flavour to pick
1965 between OSF and VMS routines. Default to OSF.
1967 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1969 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1970 * configure: Rebuild.
1971 * Makefile.in (install): Use @INSTALL_SHLIB@.
1973 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1975 * configure: (bfd_d10v_arch) Add new case.
1976 * configure.in: (bfd_d10v_arch) Add new case.
1977 * d10v-dis.c: New file.
1978 * d10v-opc.c: New file.
1979 * disassemble.c (disassembler) Add entry for d10v.
1981 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1983 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1984 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1986 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1988 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1989 distinguish between variants of the instruction set.
1990 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1991 distinguish between variants of the instruction set.
1993 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1995 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1996 the 8086 instruction set.
1997 * i386-dis.c: General cleanups. Make most things static. Add
1998 prototypes. Get rid of static variables aflags and dflags. Pass
1999 them as args (to almost everything).
2001 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2003 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2005 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2007 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2008 if the next arg is marked with SRC_IN_DST. Gross.
2010 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2011 we're looking for and find EXR.
2013 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2014 if we're looking for KBIT and we don't find it.
2016 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2019 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2020 3bit immediate operands.
2022 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2024 * Released binutils 2.7.
2026 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2027 <kkaempf@progis.ac-net.de>.
2029 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2031 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2033 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2035 * sparc-dis.c (print_insn_sparclite): New routine to print
2036 sparclite instructions.
2038 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2040 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2042 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2044 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2045 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2046 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2048 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2050 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2051 Use autoconf-set values.
2052 (docdir, oldincludedir): Removed.
2053 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2055 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2057 * alpha-opc.c: New file.
2058 * alpha-opc.h: Remove.
2059 * alpha-dis.c: Complete rewrite to use new opcode table.
2060 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2061 * configure: Rebuild with autoconf 2.10.
2062 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2063 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2065 (alpha-opc.o): New target.
2067 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2069 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2070 Set imm_added_to_rs1 even if the source and destination register
2073 * sparc-opc.c: Add some two operand forms of the wr instruction.
2075 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2077 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2080 * disassemble.c (disassembler): Handle H8/S.
2081 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2083 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2085 * sparc-opc.c: Add beq/teq as aliases for be/te.
2087 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2088 <sergei@msil.sps.mot.com>.
2090 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2092 * makefile.vms: New file.
2094 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2096 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2098 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2101 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2103 * i386-dis.c (OP_OFF): Call append_prefix.
2105 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2107 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2108 unsigned long to silence a warning from the Solaris PowerPC
2111 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2113 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2115 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2117 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2119 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2120 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2121 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2122 cpush, cpusha, cpull sparclet insns.
2124 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2126 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2128 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2130 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2131 Set F_FLOAT on other floating point instructions.
2133 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2135 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2137 (powerpc_opcodes): Add 860/821 specific SPRs.
2139 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2141 * configure.in: Permit --enable-shared to specify a list of
2142 directories. Set and substitute BFD_PICLIST.
2143 * configure: Rebuild.
2144 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2145 uses. Set to @BFD_PICLIST@.
2147 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2149 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2150 not "abs", which may be needed for the absolute in something
2151 like btst #0,@10:8. Print L_3 immediates separately from other
2152 immediates. Change ABSMOV reference to ABS8MEM.
2154 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2156 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2157 (current_arch_mask): New static global.
2158 (compute_arch_mask): New static function.
2159 (print_insn_sparc): Delete sparc_v9_p. New static local
2160 current_mach. Resort opcode table if current_mach changes.
2161 Generalize "insn not supported" test.
2162 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2163 Delete test for v9/!v9.
2164 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2166 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2167 (brfcx): Renamed to FBRX.
2168 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2169 coprocessor mnemonics are not supported on the sparclet).
2170 (condf): Renamed to CONDF.
2171 (SLCBCC2): Delete F_ALIAS flag.
2173 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2175 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2176 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2178 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2180 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2181 that the shared library version number is set correctly.
2183 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2185 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2186 Miles Bader <miles@gnu.ai.mit.edu>.
2187 * configure: Rebuild.
2189 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2191 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2194 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2196 * configure: Rebuild with autoconf 2.8.
2198 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2200 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2201 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2203 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2205 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2206 since they appear as targets in Makefile.in.
2207 * configure: Rebuild.
2209 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2211 * mpw-make.sed: Edit out shared library support bits.
2213 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2215 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2216 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2217 (sparc_opcodes): Add sparclet insns.
2218 (sparclet_cpreg_table): New static local.
2219 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2220 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2222 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2224 * i386-dis.c (index16): New static variable.
2225 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2227 (OP_indirE): Return result of OP_E.
2228 (OP_E): Check for 16 bit addressing mode, and disassemble
2229 correctly. Optimised 32 bit case a little. Don't print
2230 "(base,index,scale)" when sib specifies only an offset.
2232 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2234 * configure.in: Set and substitute SHLIB_DEP.
2235 * configure: Rebuild.
2236 * Makefile.in (SHLIB_DEP): New variable.
2237 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2238 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2239 COMMON_SHLIB, add them to piclist with appropriate modifications.
2240 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2241 here: just use piclist.
2243 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2245 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2246 (print_insn_sparc): Rewrite v9/not-v9 tests.
2247 (compare_opcodes): Likewise.
2248 * sparc-opc.c (MASK_<ARCH>): Define.
2249 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2250 (sparclet,v6notv9): Define.
2251 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2252 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2254 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2256 * configure.in: Call AC_PROG_CC before configure.host.
2257 * configure: Rebuild.
2259 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2261 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2263 * i386-dis.c (onebyte_has_modrm): New static array.
2264 (twobyte_has_modrm): New static array.
2265 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2267 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2269 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2272 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2274 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2277 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2279 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2280 m68010up, not just m68020up | cpu32.
2282 * Makefile.in (SONAME): New variable.
2283 ($(SHLINK)): Make a link to the transformed name, as well.
2284 (stamp-tshlink): New target.
2285 (install): Skip stamp-tshlink during install.
2287 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2289 * configure.in: Call AC_ARG_PROGRAM.
2290 * configure: Rebuild.
2291 * Makefile.in (program_transform_name): New variable.
2292 (install): Transform library name before installing it.
2294 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2296 * i960-dis.c (mem): Add HX dcinva instruction.
2298 Support for building as a shared library, based on patches from
2299 Alan Modra <alan@spri.levels.unisa.edu.au>:
2300 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2301 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2302 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2303 * configure: Rebuild.
2304 * Makefile.in (ALLLIBS): New variable.
2305 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2306 (COMMON_SHLIB, SHLINK): New variables.
2307 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2308 (STAGESTUFF): Remove variable.
2309 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2310 (stamp-piclist, piclist): New targets.
2311 ($(SHLIB), $(SHLINK)): New targets.
2312 ($(OFILES)): Depend upon stamp-picdir.
2313 (disassemble.o): Build twice if PICFLAG is set.
2314 (MOSTLYCLEAN): Add pic/*.o.
2315 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2316 (distclean): Remove pic and stamp-picdir.
2317 (install): Install shared libraries.
2318 (stamp-picdir): New target.
2320 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2322 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2323 Print unknown instruction as "unknown", rather than in hex.
2325 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2327 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2329 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2331 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2333 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2335 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2336 when necessary. From Ulrich Drepper
2337 <drepper@myware.rz.uni-karlsruhe.de>.
2339 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2341 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2342 sparc_num_opcodes. Update architecture enum values.
2343 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2344 (sparc_opcode_lookup_arch): New function.
2345 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2346 (sparc_opcodes): Add v9a shutdown insn.
2348 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2350 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2351 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2353 (print_insn_sparc64): Deleted.
2354 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2357 * sparc-opc.c (architecture_pname): Add v9a.
2359 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2361 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2362 incorrectly defined as 0x16 when it should be 0x15.
2363 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2364 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2365 excb (exception barrier) which is defined in the Alpha
2366 Architecture Handbook version 2.
2367 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2368 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2369 disassembled as or, for example.
2371 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2373 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2374 (_print_insn_mips): Change i from int to unsigned int.
2376 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2378 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2379 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2381 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2383 * i386-dis.c: Added Pentium Pro instructions.
2385 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2387 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2390 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2392 * sh-opc.h (sh_nibble_type): Added REG_B.
2393 (sh_arg_type): Added A_REG_B.
2394 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2396 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2398 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2400 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2402 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2404 * Makefile.in (distclean): Remove stamp-h. From Ronald
2405 F. Guilmette <rfg@monkeys.com>.
2407 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2409 From David Mosberger-Tang <davidm@azstarnet.com>:
2410 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2413 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2415 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2416 (sh_table): Added many SH3 opcodes.
2417 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2419 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2421 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2422 (subco,subco.): Mark this PPC, not PPCCOM.
2424 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2426 * configure: Rebuild with autoconf 2.7.
2428 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2430 * configure: Rebuild with autoconf 2.6.
2432 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2434 * configure.in: Sort list of architectures. Accept but do nothing
2435 for alliant, convex, pyramid, romp, and tahoe.
2437 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2439 * a29k-dis.c (print_special): Change num to unsigned int.
2441 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2443 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2446 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2448 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2449 * configure: Rebuilt.
2451 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2453 * configure.in: Add case for bfd_i860_arch.
2454 * configure: Rebuild.
2456 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2458 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2459 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2460 (NEXTDOUBLE): Likewise.
2461 (print_insn_m68k): Don't match fmoveml if there is more than one
2462 register in the list.
2463 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2465 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2467 * m68k-opc.c: Use #W rather than #w.
2468 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2470 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2472 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2473 and likewise for all the dbxx opcodes.
2475 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2477 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2479 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2481 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2482 the VR4100 specific instructions to the mips_opcodes structure.
2484 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2486 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2487 ugly Metrowerks bug in CW6, is fixed in CW7.
2489 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2491 * ppc-opc.c (whole file): Add flags for common/any support.
2493 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2495 * Makefile.in (BISON): Remove macro.
2496 (FLAGS_TO_PASS): Remove BISON.
2498 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2500 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2502 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2503 instructions that take no args by looking at the match mask.
2504 (print_insn_arg): Always print "%" before register names.
2505 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2506 [case '_']: Don't print "@#" before address.
2507 [case 'J']: Use "%s" as format string, not register name.
2508 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2510 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2512 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2515 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2517 From David Mosberger-Tang <davidm@azstarnet.com>
2519 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2520 (alpha_insn_set): added definitions for VAX floating point
2521 instructions (Unix compilers don't generate these, but handcoded
2522 assembly might still use them).
2524 * alpha-dis.c (print_insn_alpha): added support for disassembling
2525 the miscellaneous instructions in the Alpha instruction set.
2527 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2529 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2530 no longer create sysdep.h, sed ppc-opc.c to work around a
2531 serious Metrowerks C bug.
2532 * mpw-make.in: Remove.
2533 * mpw-make.sed: New file, used by mpw-configure to edit
2534 Makefile.in into an MPW makefile.
2536 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2538 * Makefile.in (maintainer-clean): New synonym for realclean.
2540 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2542 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2543 which use '0', '1', and '2' instead. Specify the proper size for
2544 a pmove immediate operand. Correct the pmovefd patterns to be
2545 moves to a register, not from a register.
2546 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2548 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2550 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2551 %psr, %wim, %tbr as F_NOTV9.
2553 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2555 * Makefile.in (Makefile): Just rebuild Makefile when running
2557 (config.h, stamp-h): New targets.
2558 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2559 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2560 rebuilding config.h.
2561 * configure: Rebuild.
2563 * mips-opc.c: Change unaligned loads and stores with "t,A"
2564 operands to use "t,A(b)".
2566 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2568 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2570 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2572 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2573 until 3 instead of until 2.
2575 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2577 * Makefile.in (ALL_CFLAGS): Define.
2578 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2579 (MOSTLYCLEAN): Add config.log.
2580 (distclean): Don't remove config.log.
2581 * configure.in: Substitute HDEFINES.
2582 * configure: Rebuild.
2584 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2586 * sh-opc.h (sh_arg_type): Add F_FR0.
2587 (sh_table, case fmac): Add F_FR0 as first argument.
2589 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2591 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2593 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2595 * sparc-dis.c: Remove all references to NO_V9.
2597 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2599 * aclocal.m4: Just include ../bfd/aclocal.m4.
2600 * configure: Rebuild.
2602 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2604 * sparc-dis.c (X_DISP19): Define.
2605 (print_insn, case 'G'): Use it.
2606 (print_insn, case 'L'): Sign extend displacement.
2608 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2610 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2611 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2612 host_makefile_frag or frags.
2613 * aclocal.m4: New file.
2614 * configure: Rebuild.
2615 * Makefile.in (INSTALL): Set to @INSTALL@.
2616 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2617 (INSTALL_DATA): Set to @INSTALL_DATA@.
2619 (AR_FLAGS): Set to rc rather than qc.
2620 (CC): Define as @CC@.
2621 (CFLAGS): Set to @CFLAGS@.
2622 (@host_makefile_frag@): Remove.
2623 (config.status): Remove dependency upon @frags@.
2625 * configure.in: ../bfd/config.bfd now just sets shell variables.
2626 Use them rather than looking through target Makefile fragments.
2627 * configure: Rebuild.
2629 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2631 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2633 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2635 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2636 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2639 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2640 (lookup_{name,value}): New functions.
2641 (prefetch_table): New static local.
2642 (sparc_{encode,decode}_prefetch): New functions.
2643 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2645 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2647 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2650 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2652 * sh-dis.c: Correct comment on first line of file.
2654 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2656 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2658 * sparc-opc.c (asi, membar): New static locals.
2659 (sparc_{encode,decode}_{asi,membar}): New functions.
2660 (sparc_opcodes, membar insn): Fix.
2661 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2662 Support decoding of membar masks.
2665 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2667 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2669 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2671 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2672 and likewise for the other branches. Add bhs as an alias for bcc,
2673 and likewise for the size variants. Add dbhs as an alias for
2676 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2678 * sh-opc.h (FP sts instructions): Update to match reality.
2680 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2682 * m68k-dis.c: (fpcr_names): Add % before all register names.
2683 (reg_names): Likewise.
2684 (print_insn_arg): Don't explicitly print % before register names.
2685 Add % before register names in static array names. In case 'r',
2686 print data registers as `@(Dn)', not `Dn@'. When printing a
2687 memory address, don't print @# before it.
2688 (print_indexed): Change base_disp and outer_disp from int to
2689 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2690 syntax. Sign extend 8 byte displacement correctly.
2691 (print_base): Print using MIT syntax. Print zpc when appropriate.
2692 Change parameter disp from int to bfd_vma.
2694 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2697 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2699 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2700 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2701 * sh-opc.h (sh_arg_type): Add new operand types.
2702 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2704 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2706 * Makefile.in (distclean): Remove generated file config.h.
2708 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2710 * Makefile.in (distclean): Remove generated file config.h.
2712 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2714 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2716 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2718 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2719 rather than numopcodes. Use m68k_opcodes rather than removed
2720 opcode function. Don't check F_ALIAS.
2721 (print_insn_arg): Change first parameter to be const char *.
2722 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2723 (m68k-opc.o): New target.
2724 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2725 * configure: Rebuild.
2727 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2729 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2730 (opcode_bits, opcode_hash_table): New variables.
2731 (opcodes_initialized): Renamed from opcodes_sorted.
2732 (build_hash_table): New function.
2733 (is_delayed_branch): Use hash table.
2734 (print_insn): Renamed from print_insn_sparc, made static.
2735 Build and use hash table. If !sparc64, ignore sparc64 insns,
2736 and vice-versa if sparc64.
2737 (print_insn_sparc, print_insn_sparc64): New functions.
2738 (compare_opcodes): Move sparc64 opcodes to end.
2739 Print commutative insns with constant second.
2740 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2742 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2744 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2745 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2746 avoids printing a delay slot in a delay slot.
2747 * sh-opc.h (sh_table): Fully bracket last entry.
2749 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2751 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2753 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2755 * configure.in: Get host_makefile_frag from ${srcdir}.
2757 * configure.in: Autoconfiscated. Check for string[s].h. Create
2758 config.h from config.in. Don't set up sysdep.h link.
2759 * sysdep.h: New file.
2760 * configure, config.in: New files, generated from configure.in.
2761 * Makefile.in: Updated to be processed autoconf-style.
2762 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2763 (Makefile): Depend on config.status.
2764 (config.status): New rule.
2765 * configure.bat: Update Makefile substitutions.
2767 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2769 * mips-opc.c (L1): Define.
2770 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2771 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2774 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2776 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2777 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2778 have multiple add units but only a single logical unit.
2780 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2781 shifted by 18, without any insertion or extraction function.
2782 (insert_cr, extract_cr): Remove.
2784 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2786 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2789 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2791 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2792 * sh-opc.h: Add copyright.
2794 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2796 * Makefile.in (crunch-m68k): Delete extra target accidentally
2797 checked in a while ago.
2799 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2801 * sh-opc.h (sh_table): Add SH3 support.
2803 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2805 * sh-opc.h: Added bsrf and braf.
2807 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2809 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2810 bogus [ls]fm{ea,fd} patterns.
2812 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2813 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2814 initialize it from memory. Make function static.
2815 (print_insn_{big,little}_arm): New functions.
2816 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2817 the correct endianness.
2819 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2821 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2824 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2826 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2827 17th, so that it builds again using GCC as the compiler.
2829 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2831 * mips-dis.c (print_insn_little_mips): Cast return value from
2832 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2833 expects an unsigned long, and that might be fewer words of
2834 argument storage (e.g., if bfd_vma is long long on a 32-bit
2836 (print_insn_big_mips): Likewise with bfd_getb32 value.
2837 (_print_insn_mips): Now static.
2839 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2841 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2842 gcc memory hog problem with initializer is fixed.
2844 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2846 Merge in support for Mac MPW as a host.
2847 (Old change descriptions retained for informational value.)
2849 * mpw-config.in (archname): Compute from the config.
2850 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2852 * mpw-config.in (target_arch): Compute from canonical target.
2853 (m68k, mips, powerpc, sparc): Add architectures.
2854 * mpw-make.in (disassemble.c.o): Add.
2855 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2857 * mpw-config.in (BFD_MACHINES): Set to a default value.
2858 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2860 * mpw-make.in (CSEARCH): Add extra-include to search path.
2862 * mpw-config.in (varargs.h): Don't create.
2863 (sysdep.h): Create using forward-include.
2864 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2866 * mpw-config.in: New file, MPW version of configure.in.
2867 * mpw-make.in: New file, MPW version of Makefile.in.
2869 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2871 * alpha-dis.c (print_insn_alpha): Put empty statement after
2874 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2876 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2877 (low_sign_extend): Likewise.
2878 (get_field): Delete unused function.
2879 (set_field, deposit_14, deposit_21): Likewise.
2881 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2883 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2886 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2888 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2890 * alpha-opc.h (OSF_ASMCODE): define
2891 print pal-code names as defined in App C of the
2892 Alpha Architecture Reference Manual
2894 * alpha-dis.c: cleaned up output
2895 print stylized code forms as defined in App A.4.3 of the
2896 Alpha Architecture Reference Manual
2898 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2900 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2902 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2905 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2907 * m68k-dis.c (opcode): New function. Returns address of opcode
2908 table entry given index, even if the opcode table was split to
2909 work around gcc bugs.
2910 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2912 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2913 (reg_names): Now const.
2914 (print_insn_arg): Arrays cacheFieldName and names now const.
2915 (print_indexed): Array scales now const.
2917 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2919 * ppc-opc.c: Sort recently added instructions by minor opcode
2920 number within major opcode number.
2922 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2924 * hppa-dis.c: Include libhppa.h.
2926 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2928 * mips-opc.c: Change dli to use M_DLI, and add dla.
2930 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2932 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2934 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2936 * mips-opc.c: Add r4650 mul instruction.
2938 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2940 * mips-opc.c: Add uld and usd macros for unaligned double load and
2943 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2945 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2946 mfdcr, mtdcr, icbt, iccci.
2948 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2950 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2951 signed char fields to shorts, more portable.
2953 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2955 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2956 char fields as signed chars, since they may have negative values.
2958 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2960 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2961 (mycroft@netbsd.org).
2963 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2965 From "Logg, Ed" <elogg@ea.com>:
2966 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2967 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2970 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2972 * ppc-opc.c: Changes based on patch from David Edelsohn
2973 <edelsohn@mhpcc.edu>.
2974 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2977 (insert_tbr): New static function.
2978 (extract_tbr): New static function.
2979 (XFXFXM_MASK, XFXM): Define.
2980 (XSPRBAT_MASK, XSPRG_MASK): Define.
2981 (powerpc_opcodes): Add instructions to access special registers by
2982 name. Add mtcr and mftbu.
2984 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2986 * mips-opc.c (P3): Define.
2987 (mips_opcodes): Add mad and madu.
2989 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2991 * configure.in: Add W65 support.
2992 * disassemble.c: Likewise.
2993 * w65-opc.h, w65-dis.c: New files.
2995 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2997 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3000 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3002 * mips-opc.c: Add dli as a synonym for li.
3004 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3006 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3007 print something for reserved opcode values, even if it won't
3010 * mips-dis.c (_print_insn_mips): When initializing, shift right
3011 and mask, to avoid sign extension problems on the Alpha.
3013 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3016 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3018 * sh-opc.h (mov.l gbr): Get direction right.
3019 * sh-dis.c (print_insn_shx): New function.
3020 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3021 print opcodes with right byte order.
3023 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3025 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3026 to avoid conflicts with getopt.
3028 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3030 * hppa-dis.c (print_insn_hppa): Read the instruction using
3031 bfd_getb32, so that it works on a little endian or 64 bit host.
3032 Remove unused local variable op.
3034 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3036 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3037 addu does not work correctly if -mips3.
3039 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3041 * a29k-dis.c (print_special): Add special register names defined
3042 on 29030, 29040 and 29050.
3043 (print_insn): Handle new operand type 'I'.
3045 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3047 * Makefile.in (INSTALL): Use top level install.sh script.
3049 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3051 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3052 that it works on a little endian host.
3054 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3056 * configure.in: Use ${config_shell} when running config.bfd.
3058 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3060 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3062 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3064 * a29k-dis.c (print_insn): Print the opcode.
3066 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3068 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3070 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3072 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3074 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3076 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3077 which store a value into memory.
3079 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3081 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3082 * arm-dis.c, arm-opc.h: New files.
3084 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3086 * Makefile.in (ns32k-dis.o): Add dependency.
3087 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3088 string, not as array of chars.
3090 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3092 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3094 * sparc-opc.c: Added sparclite extended FP operations, and
3095 versions of v9 impdep* instructions permitting specification of
3098 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3100 * i960-dis.c (reg_names): Now const.
3101 (struct sparse_tabent): New type, copied from array type in mem
3103 (ctrl): Local static array ctrl_tab now const.
3104 (cobr): Local static array cobr_tab now const.
3105 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3106 static variable mem_tab no longer explicitly initialized. Changed
3107 mem_init to const array of struct sparse_tabent.
3108 (reg): Local static variable reg_tab no longer explicitly
3109 initialized. Changed reg_init to const array of struct
3111 (ea): Local static array scale_tab now const.
3113 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3116 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3118 * configure.bat: the disassember needs to be enabled for
3119 "objdump -d" to work in djgpp.
3121 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3123 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3124 (invalid_float): Enabled general version, doesn't require running
3125 on ns32k host. Changed to take char* argument, and test for
3126 explicitly specified sizes, instead of using sizeof() on host CPU
3128 (INVALID_FLOAT): Cast first argument.
3129 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3130 list_P032, list_M032): Now const.
3131 (optlist, list_search): Made appropriate arguments now point to
3133 (print_insn_arg): Changed static array of one-character-string
3134 pointers into a static const array of characters; fixed sprintf
3135 statement accordingly.
3137 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3139 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3140 from distribution. A ns32k-dis.c from a previous distribution has
3141 been brought up to date and supports the new interface.
3143 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3145 * configure.in: add bfd_ns32k_arch target support.
3147 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3148 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3150 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3152 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3155 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3157 * h8300-dis.c, mips-dis.c: Don't use true and false.
3159 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3161 * configure.in: Change --with-targets to --enable-targets.
3163 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3165 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3166 opcodes to the first instruction with that opcode, to speed
3167 disassembly of large files. From ralphc@pyramid.com (Ralph
3170 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3172 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3174 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3176 * configure.bat: update to latest makefile.in
3178 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3180 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3181 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3182 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3183 slot insn is in a delay slot.
3184 * z8k-opc.h: (resflg): Fix patterns.
3185 * h8500-opc.h Fix CR insn patterns.
3187 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3189 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3190 "cmpl" before POWER versions, so that gas -many uses them.
3192 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3194 * disassemble.c: New file.
3195 * Makefile.in (OFILES): Add disassemble.o.
3196 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3197 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3198 binutils/configure.in.
3200 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3201 opcode being examined.
3203 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3205 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3206 (insert_ral, insert_ram, insert_ras): New functions.
3207 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3208 RAS for store with update.
3210 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3213 (edelsohn@npac.syr.edu).
3215 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3217 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3220 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3222 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3224 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3226 * ppc-opc.c (powerpc_operands): The signedp field has been
3227 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3228 instead. Add new operand SISIGNOPT.
3229 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3230 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3231 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3234 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3236 * i386-dis.c (struct private): Renamed to dis_private. `private'
3237 is a reserved word for dynix cc.
3239 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3241 * configure.in: Change error message to refer to bfd/config.bfd
3242 rather than bfd/configure.in.
3244 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3246 * ppc-opc.c: Define POWER2 as short alias flag.
3247 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3250 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3252 * i960-dis.c (print_insn_i960): Don't read a second word for
3253 opcodes 0, 1, 2 and 3.
3255 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3257 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3259 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3261 * m68881-ext.c: Removed; no longer used.
3262 * Makefile.in: Changed accordingly.
3264 * m68k-dis.c (ext_format_68881): Don't declare.
3265 (print_insn_m68k): If an instruction uses place 'i', it uses at
3266 least four fixed bytes.
3267 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3268 extended float, convert to double using floatformat_to_double, not
3269 ieee_extended_to_double, and fetch the data before converting it.
3271 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3273 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3274 davidj@ICSI.Berkeley.EDU (David Johnson).
3276 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3278 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3279 PowerPC uses bdnz[l][a].
3281 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3283 * dis-buf.c, i386-dis.c: Include sysdep.h.
3285 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3287 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3289 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3290 by Motorola PowerPC 601 with PPC_OPCODE_601.
3291 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3292 Disassemble Motorola PowerPC 601 instructions as well as normal
3293 PowerPC instructions.
3295 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3297 * i960-dis.c (reg, mem): Just use a static array instead of
3300 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3302 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3303 condition name index if this is for a negated condition.
3305 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3306 Floating point format for 'H' operand is backwards from normal
3307 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3308 operands (fmpyadd and fmpysub), handle bizarre register
3309 translation correctly for single precision format.
3311 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3312 or 'I' operands if the next format specifier is 'M' (fcmp
3313 condition completer).
3315 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3317 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3318 single number giving a bitmask for the MB and ME fields of an M
3319 form instruction. Change NB to accept 32, and turn it into 0;
3320 also turn 0 into 32 when disassembling. Seperated SH from NB.
3321 (insert_mbe, extract_mbe): New functions.
3322 (insert_nb, extract_nb): New functions.
3323 (SC_MASK): Mask out SA and LK bits.
3324 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3325 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3326 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3327 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3328 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3329 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3330 (powerpc_macros): Define table of macro definitions.
3331 (powerpc_num_macros): Define.
3333 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3334 if PPC_OPERAND_NEXT is set.
3336 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3338 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3339 char. Retrieve contents using bfd_getl32 instead of shifting.
3341 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3343 * ppc-opc.c: New file. Opcode table for PowerPC, including
3344 opcodes for POWER (RS/6000).
3345 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3346 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3347 (CFILES): Add ppc-dis.c.
3348 (ppc-dis.o, ppc-opc.o): New targets.
3349 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3351 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3353 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3354 No space before 'u', 'f', or 'N'.
3356 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3358 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3359 farther than we should.
3361 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3363 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3365 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3367 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3369 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3370 needs it, to prevent reading past the end of a section.
3372 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3374 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3375 Removed t,A case for la; always use t,A(b) case.
3377 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3379 From Ted Lemen <mellon@pepper.ncd.com>
3380 * mips-dis.c (print_insn_arg): Handle 'k'.
3381 * mips-opc.c: Make cache use k, not t.
3383 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3385 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3386 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3387 FLOAT_FORMAT_CODE to put out floating point register names.
3389 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3391 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3393 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3395 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3397 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3399 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3400 larger than 32. Moved dsxx32 variants first for disassembler.
3402 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3404 * z8kgen.c, z8k-opc.h: Add full lda information.
3406 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3408 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3409 movb instructions. Any necessary space will be emitted by
3410 the code to handle nullification completers.
3412 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3414 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3416 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3418 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3419 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3421 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3423 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3425 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3427 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3428 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3430 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3432 * m88k-dis.c (m88kdis): comment change. Remove space after
3434 (printop): handle new arg types DEC and XREG for m88110.
3436 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3438 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3439 type for absolute branch addresses. Delete special
3440 "ble" and "be" code in 'W' operand code.
3442 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3444 * mips-opc.c: Set hazard information correctly for branch
3445 likely instructions.
3447 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3449 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3450 info->fprintf_func for printing and info->print_address_func for
3453 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3455 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3457 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3459 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3460 Corrected second case of "b" for disassembler.
3462 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3464 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3465 to BFD swapping routines to correspond to BFD name changes.
3467 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3469 * mips-opc.c: Change div machine instruction to be z,s,t rather
3470 than s,t. Change div macro to be d,v,t rather than d,s,t.
3471 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3472 rem and remu which generates only the corresponding div
3473 instruction. This is for compatibility with the MIPS assembler,
3474 which only generates the simple machine instruction when an
3475 explicit destination of $0 is used.
3476 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3478 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3480 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3481 WR_31 hazard for bal, bgezal, bltzal.
3483 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3485 * hppa-dis.c (print_insn_hppa): Use print function
3486 from within the disassemble_info, not fprintf_filtered.
3488 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3490 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3491 Law, law@cs.utah.edu.)
3493 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3495 * mips-opc.c ("absu"): Removed.
3498 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3500 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3501 Changed hazard information to distinguish between memory load
3502 delays and coprocessor load delays.
3504 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3506 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3508 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3510 * configure.in: Don't pass cpu to config.bfd.
3512 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3514 * m88k-dis.c (m88kdis): Make class unsigned.
3516 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3518 * alpha-dis.c (print_insn_alpha): One branch format case was
3519 missing the instruction name.
3521 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3523 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3524 Add the arch-specific auxiliary files.
3525 (OFILES): Remove the arch-specific auxiliary files
3526 and use BFD_MACHINES instead of DIS_LIBS.
3527 * configure.in: Set BFD_MACHINES based on --with-targets option.
3529 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3531 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3534 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3536 * sparc-opc.c: Change CONST to const to deal with gcc
3537 -Dconst=__const -traditional.
3539 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3541 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3542 coprocessor instructions out of #if 0, and made them use new
3545 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3547 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3549 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3551 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3552 instruction, for use by the disassembler.
3554 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3555 hand-coded sign extensions that depended on 32-bit host ints.
3556 FIXME, we still depend on big-endian host bitfield ordering.
3557 (sparc_print_insn): Set the insn_info_valid field, and the
3558 other fields that describe the instruction being printed.
3560 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3562 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3563 `jmp' instead of just one of them.
3565 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3567 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3568 (fput_fp_reg_r): Renamed from fput_reg_r.
3569 (fput_fp_reg): New function.
3570 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3572 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3574 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3576 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3578 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3580 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3581 don't output a space.
3583 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3585 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3587 * mips-opc.c: New file, containing opcode table from
3588 ../include/opcode/mips.h.
3589 * Makefile.in: Add it.
3591 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3593 * m88k-dis.c: New file, moved in from gdb and changed to use the
3594 new dis-asm.h disassembler interface.
3595 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3596 (m88k-dis.o): New target.
3598 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3600 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3601 argument string const char * to correspond to opcode/mips.h.
3603 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3605 * mips-dis.c: Updated to account for name changes in new version
3607 * Makefile.in: Added header file dependencies.
3609 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3611 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3613 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3615 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3616 extend, rather than shifts.
3618 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3620 * Makefile.in: Undo 15 June change.
3622 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3624 * m68k-dis.c (print_insn_arg): Change return value to byte count
3626 * m68k-dis.c: Re-write to detect invalid operands before
3627 printing anything, so we can handle this the same way we
3628 handle invalid opcodes.
3630 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3632 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3634 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3636 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3639 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3641 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3643 * configure.in: Do make sysdep.h link.
3644 * Makefile.in: Search ../include. Don't search ../bfd.
3646 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3648 Changes from Jeff Law, law@cs.utah.edu:
3649 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3650 Do not print a space before the completers specified by
3653 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3655 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3656 defined, since gdb has been fixed.
3658 Changes from Jeff Law, law@cs.utah.edu:
3659 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3660 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3661 be a *disassemble_info, not a *FILE.
3662 * hppa-dis.c: Support 'd', '!', and 'a'.
3663 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3664 * hppa-dis.c: Delete cases which are no longer needed.
3666 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3668 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3670 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3672 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3675 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3677 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3678 * configure.in: No longer need to configure to get sysdep.h.
3680 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3682 * Patches from Jeffrey Law <law@cs.utah.edu>.
3683 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3684 templates for 1.1 FP computational instructions.
3686 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3688 * h8500-dis.c (print_insn_h8500): Address argument is type
3690 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3693 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3694 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3696 * sparc-dis.c (compare_opcodes): Move static declaration to
3699 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3701 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3702 instruction, remove unimp hack from 'l' argument.
3704 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3706 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3709 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3711 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3712 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3715 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3717 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3718 arrays of string pointers to 2-d arrays of chars, to save
3721 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3723 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3724 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3726 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3728 * hppa-dis.c: New file from Utah, adapted to new disassembler
3730 * Makefile.in: Include it.
3732 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3734 * sh-dis.c, sh-opc.h: New files.
3736 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3738 * alpha-dis.c, alpha-opc.h: New files.
3740 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3742 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3745 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3747 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3749 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3751 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3754 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3756 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3757 and double percent signs a few places.
3759 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3761 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3762 Use info->print_address_func not print_address.
3764 * dis-buf.c (generic_print_address): New function.
3766 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3768 * Makefile.in: Add sparc-dis.c.
3769 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3771 Add `add' instruction to the set that get checked
3772 for a preceding `sethi' in order to print an absolute address.
3773 * (print_insn): Disassembly prefers real instructions.
3774 (is_delayed_branch): Speed up.
3775 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3776 Still missing some float ops, and needs testing.
3777 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3778 F_ALIAS. Use printf, not fprintf, when not passing a file
3780 (compare_opcodes): Check that identical instructions have
3781 identical opcodes, complain otherwise.
3784 * Include reg_names.
3786 Use dis-asm.h/read_memory_func interface.
3788 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3790 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3791 deliberately return non-zero to setjmp from longjmp. Otherwise
3792 this code fails to compile.
3794 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3796 * m68k-dis.c: Fix prototype for fetch_arg().
3798 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3800 * dis-buf.c: New file, for new read_memory_func interface.
3801 Makefile.in (OFILES): Include it.
3802 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3803 Use new read_memory_func interface.
3805 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3807 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3808 * h8500-opc.h: Fix couple of opcodes.
3810 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3812 * Makefile.in: add dvi & installcheck targets
3814 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3816 * Makefile.in: Update for h8500-dis.c.
3818 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3820 * h8500-dis.c, h8500-opc.h: New files
3822 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3824 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3825 ../include/dis-asm.h.
3826 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3827 and ../gdb/m68k-pinsn.c).
3828 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3829 and ../gdb/i386-pinsn.c).
3830 * m68881-ext.c: New file. Moved definition of
3831 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3832 * Makefile.in: Adjust for new files.
3833 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3834 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3835 can be dis-assembled.
3837 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3839 * mips-dis.c (print_insn_arg): Now returns void.
3841 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3843 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3844 files that use the macros.
3846 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3848 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3849 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3850 (CFILES): Added mips-dis.c.
3852 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3854 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3855 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3857 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3859 * Makefile.in: Improve *clean rules.
3860 * configure.in: Allow a default host.
3862 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3864 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3865 files include other sysdep files
3867 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3869 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3871 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3873 * configure.in: For host support, use ../bfd/configure.host
3874 so it stays in sync with the ../bfd/hosts database.
3876 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3878 * configure.in: use cpu-vendor-os triple instead of nested cases
3880 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3882 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3883 *always* the wrong one.
3885 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3887 * z8kgen.c: added copyright info
3889 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3891 * z8k-dis.c (unparse_instr): prettier tabs
3892 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3894 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3896 * configure.in: Add ncr* configuration.
3897 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3898 picayune ANSI compilers happy.
3900 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3902 * configure.in (i386): Make i386 and i486 synonymous for now.
3903 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3905 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3907 * Makefile.in (install): Fix typo.
3909 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3911 * Makefile.in (make): Remove obsolete crud.
3912 (sparc-opc.o): Avoid Sun Make VPATH bug.
3914 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3916 * Makefile.in: since there are no SUBDIRS, remove rule and
3917 references of subdir_do.
3919 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3921 * Makefile.in (install): Get the library name right here too.
3922 Don't install bfd.h, since it's unrelated to this library. No
3923 subdirs to recurse into, either.
3924 (CFILES): The source file has a .c suffix, not .o.
3926 * sparc-opc.c: New file, moved from BFD.
3927 * Makefile.in (OFILES): Build it.
3929 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3931 * z8k-dis.c: fixed forward refferences of some declarations.
3933 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3935 * Makefile.in: get the name of the library right
3937 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3939 * z8k-dis.c: knows how to disassemble z8k stuff
3940 * z8k-opc.h: new file full of z8000 opcodes
3944 version-control: never
projects / external / binutils.git / blob