2 Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
4 * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
5 * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
6 (extract_ffstreg): Fix calculation of reg part of returned value.
8 Wed Jul 29 09:41:19 1998 Frank Ch. Eigler <fche@cygnus.com>
10 * dvp-opc.c (vu_lower_opcodes): Allow ISW, ISWR, MFIR instructions
11 to take multiple destination (xyzw) flags.
13 Thu Jul 23 18:26:49 1998 Frank Ch. Eigler <fche@cygnus.com>
15 * dvp-opc.c (vu_operands): Add UW operand type to force ".w" suffix
16 on ft operand of CLIP.
17 (insert_w): New function for same.
18 (vu_opcodes): Use "broadcast" style argument list for two-operand
19 CLIP insn. Call UW constraint above.
21 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
23 * dvp-dis.c (print_insn): Disassemble DVP_OPERAND_RELOC_11_S4 as
27 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
29 * dis-buf.c (generic_strcat_address): reformat to GNU coding
30 conventions. change sprintf call to an sprintf_vma call.
33 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
35 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
38 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
40 The following changes were made by
41 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
42 David Taylor <taylor@texas.cygnus.com>, and
43 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
44 merge in changes by HP; HP did not create ChangeLog entries.
46 * dis-buf.c (generic_strcat_address): new function.
48 * hppa-dis.c: Changes to improve hppa disassembly.
49 Changed formatting in : reg_names, fp_reg_names,control_reg,
50 New variables : sign_extension_names, deposit_names, conversion_names
51 float_test_names, compare_cond_names_double, add_cond_names_double,
52 logical_cond_names_double, unit_cond_names_double,
53 branch_push_pop_names, saturation_names, shift_names, mix_names,
54 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
55 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
56 (fput_const): renamed as fput_hex_const
58 - use the macros fputs_filtered and
59 fput_decimal_const whenever possible; calls to sign_extend require
60 2 params -- add a missing second param of 0.
61 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
62 architecture version number of current machine. HP folks are
63 trying to handle situation where the target program was compiled
64 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
66 - added new cases : 'g', 'B', 'm'
67 - added cases specifically for PA 2.0
68 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
69 - calls to fput_const become calls to fput_hex_const
71 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
73 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
74 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
76 (CLEANFILES): Add stamp-i960.
78 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
81 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
82 * Makefile.in: Rebuilt.
83 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
85 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
86 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
89 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
91 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
94 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
96 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
98 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
99 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
102 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
104 * fr30-opc.c: Regenerate.
106 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
108 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
110 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
112 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
114 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
116 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
119 1998-11-30 Doug Evans <devans@casey.cygnus.com>
121 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
122 CGEN_INSN_BASE_VALUE.
123 start-sanitize-cygnus
124 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
125 New args word_offset, word_length. Rewrite.
127 (insert_1): Fix lsb0 case.
128 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
129 New args word_offset, word_length. Rewrite.
131 (extract_1): Fix lsb0 case.
132 * cgen-opc.in (FLD): Define.
134 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
136 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
139 start-sanitize-cygnus
140 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
142 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
143 * Makefile.in: Rebuild.
147 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
149 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
151 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
153 * fr30-asm.c,fr30-dis.c: Regenerated.
155 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
157 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
159 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
161 * fr30-opc.c: Regenerated.
163 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
165 * fr30-opc.c: Regenerated.
166 * fr30-opc.h: Regenerated.
167 * fr30-dis.c: Regenerated.
168 * fr30-asm.c: Regenerated.
171 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
173 * mips-opc.c (sync.p,sync.l): Swap insn values.
176 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
178 * fr30-opc.c: Regenerate.
180 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
182 * fr30-opc.c: Regenerated.
183 * fr30-opc.h: Regenerated.
186 1998-11-18 Doug Evans <devans@casey.cygnus.com>
188 start-sanitize-cygnus
189 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
190 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
192 (insert_insn_normal): Fix typo.
193 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
194 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
195 Rewrite ! CGEN_INT_INSN_P case.
196 (extract_insn_normal): Ditto.
197 (extract_1): New arg `pc'. All callers updated.
198 Replace calls to bfd_getb8.
199 (fill_cache): New fn.
200 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
201 * cgen-opc.in: ... from here.
202 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
204 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
206 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
210 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
212 * fr30-opc.c: Regenerated.
214 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
216 * fr30-opc.c: Regenerated.
217 * fr30-opc.h: Regenerated.
218 * fr30-dis.c: Regenerated.
219 * fr30-asm.c: Regenerated.
221 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
223 * po/opcodes.pot: Regenerated.
224 * fr30-opc.c: Regenerated.
225 * fr30-opc.h: Regenerated.
226 * fr30-dis.c: Regenerated.
227 * fr30-asm.c: Regenerated.
229 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
231 * disassemble.c (disassembler): Add support for FR30 target.
234 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
236 start-sanitize-cygnus
237 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
238 CGEN_OPERAND_SEM_ONLY.
240 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
242 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
244 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
246 * po/opcodes.pot: Regenerate.
247 * po/POTFILES.in: Regenerate.
248 * fr30-opc.c: Regenerate.
249 * fr30-opc.h: Regenerate.
251 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
253 * m32r-asm.c: Regenerate.
256 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
258 * configure.in: Added case for bfd_fr30_arch.
259 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
260 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
261 (CLEANFILES): Added stamp-fr30.
263 * fr30-asm.c: New file.
264 * fr30-dis.c: New file.
265 * fr30-opc.c: New file.
266 * fr30-opc.h: New file.
267 * po/POTFILES.in: Regenerated
268 * po/opcodes.pot: Regenerated
272 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
274 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
275 to bcl8,bncl8 entries.
276 (macro_insn_table_entries): Add FILL_SLOT attribute
277 to bcl8r,bncl8r entries.
280 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
282 * configure.in: detect cygwin* instead of cygwin32*
283 * configure: regenerate
285 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
287 * mips-opc.c (IS_M): Added.
290 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
292 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
296 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
298 start-sanitize-cygnus
299 * cgen-asm.in (insert_1): New function.
300 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
301 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
302 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
303 * cgen-dis.in (extract_1): New function.
304 (extract_normal): buf_ctrl renamed to ex_info, update type.
305 Progress on handling of CGEN_INT_INSN_P.
306 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
307 Update handling of CGEN_INT_INSN_P. Handle errors from
308 @arch@_cgen_extract_operand.
309 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
310 (default_print_insn): Renamed from print_insn.
311 Handle ! CGEN_INT_INSN_P.
312 (print_insn_@arch@): Handle error returns from print_insn.
313 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
314 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
315 (@arch@_cgen_lookup_get_insn_operands): Ditto.
317 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
320 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
322 * m10300-opc.c: Allow autoincrement stores using the same register
323 for source and destination operands.
325 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
327 * m10300-opc.c: DSP instrutions which only write to one general
328 register have no restrictions on matching operands.
330 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
333 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
335 * m32r-opc.h,m32r-opc.c: Regenerate.
338 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
340 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
343 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
345 * i386-dis.c (OP_3DNowSuffix): New static function.
348 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
349 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
350 (insn_codep): New static variable.
351 (print_insn_x86): Init insn_codep after prefixes.
352 (grps): Add GRP14 entries for prefetch, prefetchw.
355 From Jeff B Epler <jepler@usgs.gov>
356 * i386-dis.c (Suffix3DNow): New table.
358 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
360 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
362 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
364 * d10v-dis.c (print_operand): If num is nonzero, then
365 add OPERAND_ACC1, not OPERAND_ACC0.
367 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
369 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
372 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
374 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
378 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
380 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
383 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
385 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
387 start-sanitize-nortel-ppc750
388 1998-09-09 Michael Meissner <meissner@cygnus.com>
390 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
393 end-sanitize-nortel-ppc750
394 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
396 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
398 (print_insn_little_arm): Detect Thumb symbols in elf object
401 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
403 * alpha-dis.c (print_insn_alpha): Use the machine type to
404 decide which PALcode set to include.
406 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
408 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
410 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
412 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
413 MSUB and MSUBS instructions.
416 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
418 * mips-opc.c: Insert contents of vu0.h, rather than including it.
420 * Makefile.am: Rebuild dependencies.
424 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
426 * ppc-opc.c (powerpc_operands): Omit parens around additions in
429 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
431 start-sanitize-coldfire
432 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
433 ColdFire, as below for mulsl and mulul.
435 end-sanitize-coldfire
436 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
437 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
438 +, -, and d for ColdFire.
440 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
441 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
442 (extract_mbe): Likewise.
444 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
446 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
448 * m10300-opc.c: First cut at UDF instructions.
450 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
452 * m32r-opc.c: Regenerate (remove semantic descriptions).
454 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
456 * arm-dis.c (print_insn_big_arm): Fix indentation.
457 (print_insn_little_arm): Likewise.
459 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
461 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
463 (print_insn_little_arm): Likewise.
465 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
467 Move all global state data into opcode table struct, and treat
468 opcode table as something that is "opened/closed".
469 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
470 (cgen_asm_init): Delete.
471 (cgen_set_parse_operand_fn): New function.
472 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
473 (cgen_dis_init): Delete.
474 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
475 (cgen_current_{opcode_table_mach,endian}): Delete.
476 start-sanitize-cygnus
477 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
478 * cgen-dis.in (all fns): Ditto.
479 * cgen-opc.in (all fns): Ditto.
481 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
483 start-sanitize-cygnus
484 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
486 * cgen-dis.in (print_normal): Split into two.
487 (print_address): New function.
488 (extract_insn_normal): Clarify insn_value arg.
489 (print_int_insn): Renamed from print_insn.
490 (print_insn): New arg.
491 (print_insn_@arch@): Open opcode table if not already done so.
492 Move reading of insn into print_insn.
495 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
497 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
501 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
503 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
504 accept an accumulator choice.
505 * m32r-opc.c,m32r-opc.h: Regenerate.
508 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
510 * m10300-opc.c: Add entries for "no_match_operands" field in
514 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
516 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
520 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
522 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
525 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
527 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
529 * m10300-opc.c: Add autoincrement memory loads/stores.
533 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
535 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
536 phmsubh respectively.
539 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
541 start-sanitize-cygnus
542 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
544 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
545 @arch_cgen_get_int_operand.
546 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
547 Update call to @arch@_cgen_insert_operand.
548 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
549 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
550 (extract_insn_normal): New arg `pc', callers updated.
551 Update call to @arch@_cgen_extract_operand.
552 (print_insn): Update call to CGEN_EXTRACT_FN.
554 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
557 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
559 * m10300-opc.c: Fix load to sp and store from sp for the am33.
560 Add more multimedia instructions.
562 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
564 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
569 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
571 * mips-opc.c (pref): Enabled for the r5900.
574 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
576 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
578 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
580 (OP_J): Remove unnecessary subtraction when 16-bit displacement
581 will be masked later.
584 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
586 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
589 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
591 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
592 from raw register #s to symbolic names to make debugging easier.
595 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
597 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
599 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
601 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
602 start-sanitize-cygnus
603 * Makefile.am (CGENDIR): Set via configure.
604 (CGEN): New variable.
605 (CGENFILES): object.scm renamed to cos.scm.
606 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
607 (stamp-m32r): Pass prefix to run-cgen.
608 * Makefile.in: Regenerate.
609 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
610 * cgen-dis.in: Ditto.
611 * cgen-opc.in: Ditto.
612 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
613 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
614 * configure: Regenerate.
618 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
620 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
622 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
624 * m10300-opc.c: Reorder more instructions so that we do not
625 accidentally match a mn10300 instruction when we really
626 wanted an am33 instruction.
629 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
631 * m10300-dis.c: Only recognize instructions from the currently
633 * m10300-opc.c: Add field indicating the particular variant of
634 the mn10300 each instruction is available on.
636 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
638 * configure.in: For bfd_vax_arch, build vax-dis.lo.
639 * Makefile.am: Rebuild dependencies.
640 (CFILES): Add vax-dis.c.
641 (ALL_MACHINES): Add vax-dis.lo.
642 * aclocal.m4: Rebuild with current libtool.
643 * configure, Makefile.in: Rebuild.
645 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
647 * vax-dis.c: New file, from work by Pauline Middelink
648 <middelin@polyware.iaf.nl>.
649 * disassemble.c (ARCH_vax): Define if ARCH_all.
650 (disassembler): Add case for ARCH_vax.
651 * makefile.vms: Support compilation on vms/vax.
654 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
656 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
657 the DVP_OPERAND_RELOC_11_S4 relocation.
661 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
663 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
665 (disassemble): Correctly handle FMT_D10 instructions.
667 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
668 am33 shift instructions.
670 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
672 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
673 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
675 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
676 (mn10300_opcodes): Reorder so as to try and select opcodes from
677 the core chip when multiple alternatives exist. Change several
678 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
679 "macbu" instructions. Fix typos in a couple DSP instructions too.
682 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
684 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
685 related to sign extension and the size of ints.
687 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
689 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
690 instructions. Support (sp) addressing mode by expanding it into
694 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
696 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
697 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
698 be used as immediate values.
702 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
704 * m10300-opc.c: Support 4 byte DSP instructions.
707 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
709 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
712 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
714 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
717 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
719 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
722 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
724 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
725 found on the mn10300.
728 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
730 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
733 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
735 * mips-dis.c (print_insn_little_mips): Previously, instruction
736 printing references the symbol table to determine whether the
737 instruction resides in a block regular instructions or mips16
738 instructions. However, when the disassembler gets used in other
739 environments where the symbol table is not present, we no longer
740 rely in the symbol table, rather, use the low bit of the
741 instructions address to guess. There should be no change for usage
742 of the disassembler in host based programs, gdb, objdump.
743 (print_insn_big_mips): ditto.
744 (print_insn_mips): ditto
746 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
748 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
750 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
753 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
754 operands for the am33.
755 (mn10300_opcodes): Add new instructions from the am33.
757 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
759 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
761 * i386-dis.c (index16): Add '%' to register names. Use ','
764 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
766 * i386-dis.c: Don't print opcode suffix when we can figure out the
767 size (and gas can!) by register operands, or from the default
769 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
771 (dis386, dis386_twobyte, grps): Use new suffix macros.
772 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
773 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
774 order of cmps operands to agree with Intel docs. Correct operand
775 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
776 agree with Intel docs.
777 (print_insn_x86): Print orphan fwait before other prefixes.
778 Return correct byte count for orphan fwait with prefixes. Don't
779 print `bound' operands in reverse order.
780 (ckprefix): Stop accumulating prefixes if we get fwait.
781 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
783 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
785 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
786 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
788 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
790 Fix problems when bfd_vma is wider than long.
791 * i386-dis.c: Make op_address and start_pc unsigned.
792 (set_op): Make parameter unsigned.
793 (print_insn_x86): Cast to bfd_vma when passing a value to
795 * ns32k-dis.c (CORE_ADDR): Don't define.
796 (print_insn_ns32k): Change type of addr to bfd_vma. Use
797 bfd_scan_vma to read back address.
798 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
800 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
801 (NEXTULONG): New definition.
802 (print_insn_m68k): Avoid overflow when computing third argument of
804 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
805 Use disp instead of val to store offset values.
806 (print_indexed): Use base_disp instead of word to store base
807 displacement, to avoid overflow.
808 * m10300-dis.c (disassemble): Cast value to long when computing
809 pc-relative address, to get correct sign extension.
811 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
813 * m32r-opc.c: Regenerate.
815 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
817 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
818 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
820 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
822 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
824 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
826 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
828 (OP_DSreg): Rename from OP_DSSI.
829 (OP_ESreg): Rename from OP_ESDI.
830 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
832 (append_seg): Rename from append_prefix.
833 (ptr_reg): New function.
834 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
836 (PREFIX_ADDR): Rename from PREFIX_ADR.
837 (float_reg): Add non-broken opcodes for people who don't want
840 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
842 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
845 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
847 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
849 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
851 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
852 0; produce error message for shifts of size 32 (or 64 for 64-bit
853 shifts), because the hardware doesn't support them.
856 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
858 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
861 * vu0.h (sqc2): Fix opcode.
863 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
867 start-sanitize-cygnus
868 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
870 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
871 Change pinfo to use WR_HILO.
874 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
876 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
877 LONG_2, LONG_2b formats to use this new operand.
879 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
881 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
883 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
885 * sparc-dis.c (print_insn_sparc): big endian instruction / little
888 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
890 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
891 and SHORT_B3b formats to use Rb instead of Ra.
893 Add FLAG_MUL16 to MUL2XH opcode.
895 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
896 to existing 1.1.1 parallelisation prohibition procedure.
898 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
900 start-sanitize-cygnus
901 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
902 * cgen-dis.in (extract_normal): Likewise.
904 * m32r-asm.c,m32r-dis.c: Regenerate.
907 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
909 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
913 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
915 * mips-opc.c (multu1): Add two operand variant for the r5900.
918 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
920 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
921 with a shift count of 0.
924 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
926 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
928 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
930 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
931 (_print_insn_mips): Likewise.
932 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
936 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
938 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
939 (cgen_hw_lookup_by_num): New function.
942 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
945 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
947 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
949 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
951 * sparc-dis.c (print_insn_sparc): Always fetch instructions
952 as big-endian on SPARClite.
955 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
957 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
959 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
963 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
965 * d30v-opc.c (pre_defined_register): Remove alias for r0.
968 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
970 * mips-opc.c (break): Added 20-bit single-operand break
971 instruction for R5900 only.
974 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
976 * po/Make-in (install-info): New target.
978 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
980 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
981 * configure: Rebuild.
983 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
985 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
986 variety of ISA2 instructions to set bottom ten bits of trap code.
988 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
990 * Makefile.am (config.status): Add explicit target so that
991 config.status depends upon bfd/configure.in.
992 * Makefile.in: Rebuild.
994 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
996 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
997 instructions to set bottom ten bits of break code.
998 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
999 for above optional argument.
1001 start-sanitize-cygnus
1002 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
1004 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
1005 * m32r-opc.h: Regenerate.
1008 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1010 * makefile.vms: Run dec c with /nodebug.
1012 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1014 * Makefile.in: Rebuilt.
1015 * Makefile.am: Regenerated dependencies with mkdep.
1017 * opintl.h (_): Define as dgettext.
1019 start-sanitize-cygnus
1020 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
1022 * configure.in: Add support for --enable-cgen-maint.
1023 * Makefile.am (M32R_DEPS): New variable.
1024 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
1025 * aclocal.m4: Regenerate.
1026 * Makefile.in: Regenerate.
1027 * configure: Regenerate.
1029 * Makefile.am (CGENFILES): Add minsn.scm.
1032 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1034 * cgen-asm.c: Internationalised.
1035 start-sanitize-cygnus
1036 * cgen-asm.in: Internationalised.
1037 * cgen-opc.in: Internationalised.
1039 * m32r-asm.c: Internationalised.
1040 * m32r-dis.c: Internationalised.
1041 * m32r-opc.c: Internationalised.
1043 * aclocal.m4: Regenerated.
1044 * configure: Regenerated.
1045 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1046 * Makefile.in: Rebuild.
1047 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1048 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1050 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1052 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1054 * aclocal.m4, configure: Rebuild with current tools.
1056 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1058 * opintl.h: New file - contains internationalisation macros used
1059 by source files in this directory.
1060 * po/: New subdirectory - contains internationalisation files.
1061 * po/Make-in: New file - Makefile constructor.
1062 * po/POTFILES.in: New file - list of files in opcodes directory
1063 that should be scan for internationalisation macros.
1064 * po/opcodes.pot: New file - list of internationisation strings
1065 found in files mentioned in po/POTFILES.in.
1066 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1067 entry. Add intl directory to include paths.
1068 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1069 HAVE_STRCPY, HAVE_LC_MESSAGES
1070 * configure.in: Add rule to build Makefile in po subdirectory.
1071 * Makefile.in: Rebuilt.
1072 * aclocal.m4: Rebuilt.
1073 * config.in: Rebuilt.
1074 * configure: Rebuilt.
1075 * alpha-opc.c: Internationalised.
1076 * arc-dis.c: Internationalised.
1077 * arc-opc.c: Internationalised.
1078 * arm-dis.c: Internationalised.
1079 * cgen-asm.c: Internationalised.
1080 * d30v-dis.c: Internationalised.
1081 * dis-buf.c: Internationalised.
1083 * dvp-dis.c: Internationalised.
1084 * dvp-opc.c: Internationalised.
1086 * h8300-dis.c: Internationalised.
1087 * h8500-dis.c: Internationalised.
1088 * i386-dis.c: Internationalised.
1089 * m10200-dis.c: Internationalised.
1090 * m10300-dis.c: Internationalised.
1091 * m68k-dis.c: Internationalised.
1092 * m88k-dis.c: Internationalised.
1093 * mips-dis.c: Internationalised.
1094 * ns32k-dis.c: Internationalised.
1095 * opintl.h: Internationalised.
1096 * ppc-opc.c: Internationalised.
1097 * sparc-dis.c: Internationalised.
1098 * v850-dis.c: Internationalised.
1099 * v850-opc.c: Internationalised.
1101 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1103 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1104 (asm_hash_table_entries): New variable.
1105 (cgen_asm_init): Free asm_hash_table_entries.
1106 (hash_insn_array,hash_insn_list): New functions.
1107 (build_asm_hash_table): Use them. Hash macro insns as well.
1108 (cgen_asm_lookup_insn): Update.
1109 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1110 (dis_hash_table_entries): New variable.
1111 (cgen_dis_init): Free dis_hash_table_entries.
1112 (hash_insn_array,hash_insn_list): New functions.
1113 (build_dis_hash_table): Use them. Hash macro insns as well.
1114 (cgen_dis_lookup_insn): Update.
1115 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1116 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1117 (cgen_macro_insn_count): New function.
1118 start-sanitize-cygnus
1119 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1120 All callers updated. Sanity check result of extract fn.
1121 (@arch@_cgen_get_insn_operands): Change result type to void.
1122 Delete args insn_value, length. New arg fields. All callers updated.
1123 (@arch@_cgen_lookup_get_insn_operands): New function.
1125 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1127 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1129 * i386-dis.c (OP_DSSI): Print segment override.
1131 start-sanitize-r5900
1132 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1134 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1137 start-sanitize-r5900
1138 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1140 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1143 start-sanitize-r5900
1144 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1146 * vu0.h (vlqd, vlqi): Update per revised specs.
1150 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1152 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1153 (vif_operands): Update.
1154 (vif_get_unpackloc): Delete.
1155 (state_vif_unpackloc{,_star_p}): Delete.
1156 (dvp_opcode_init_parse): Update.
1157 (vif_unpack_len_value): Avoid divide by zero.
1160 start-sanitize-r5900
1161 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1163 * vu0.h: Specs changed for VCALLMSR bit pattern.
1164 * mips-dis.c: (print_insn_arg) Matching change.
1167 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1169 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1172 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1174 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1175 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1176 * configure.in: Define and substitute WIN32LDFLAGS and
1178 * aclocal.m4: Rebuild with new libtool.
1179 * configure, Makefile.in: Rebuild.
1181 start-sanitize-r5900
1182 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1184 * vu0.h: Corrected bit pattern for VMAXI opcode.
1187 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1189 * m32r-opc.c: Regenerate.
1192 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1194 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1195 (dvp_expand_macro): Implement.
1196 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1197 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1200 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1202 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1203 before trying to copy it.
1204 * Makefile.in: Rebuild.
1206 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1208 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1210 start-sanitize-m32rx
1211 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1213 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1216 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1218 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1219 from an arbitrary valid buffer instead of fetching them on demand
1221 (invalid_float): use bit_extract_simple() instead of bit_extract().
1223 start-sanitize-m32rx
1224 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1226 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1227 * m32r-opc.h: Add extra control registers.
1230 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1232 From H.J. Lu <hjl@gnu.org>:
1233 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1236 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1238 * Branched binutils 2.9.
1240 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1242 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1243 disassembling last 4 bytes of a section.
1245 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1247 Fix some gcc -Wall warnings:
1248 * arc-dis.c (print_insn): Add casts to avoid warnings.
1249 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1250 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1252 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1253 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1254 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1255 (parse_ffstreg, parse_vif_mode): Likewise.
1257 * m10200-dis.c (disassemble): Likewise.
1258 * m10300-dis.c (disassemble): Likewise.
1259 * ns32k-dis.c (print_insn_ns32k): Likewise.
1260 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1261 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1262 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1263 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1264 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1266 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1267 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1268 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1270 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1271 start-sanitize-tic80
1272 * tic80-dis.c (print_one_instruction): Likewise.
1274 * w65-dis.c (print_operand): Likewise.
1275 * z8k-dis.c (fetch_data): Likewise.
1276 * a29k-dis.c: Add return type for find_byte_func_type.
1277 * arc-opc.c: Include <stdio.h>. Remove declarations of
1278 insert_multshift and extract_multshift.
1279 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1281 (extract_value): Fully parenthesize expression.
1283 * dvp-opc.c: Include <ctype.h>.
1284 (print_sdest): Add default case to switch.
1286 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1287 * h8500-opc.h (h8500_table): Fully bracket initializer.
1288 * w65-opc.h (optable): Likewise.
1289 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1290 * i386-dis.c (OP_E): Initialize local variables.
1291 * m10200-dis.c (print_insn_mn10200): Likewise.
1292 * mips-dis.c (print_insn_mips16): Likewise.
1293 * sh-dis.c (print_insn_shx): Likewise.
1294 * v850-dis.c (print_insn_v850): Likewise.
1295 * ns32k-dis.c (print_insn_arg): Declare.
1296 (get_displacement, invalid_float): Declare.
1297 (list_search, sign_extend, flip_bytes): Declare return type.
1298 (get_displacement): Likewise.
1299 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1301 (print_insn_ns32k): Make i unsigned.
1302 (invalid_float): Make static. Declare type of val.
1303 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1304 on each for iteration.
1305 * tic30-dis.c (get_indirect_operand): Likewise.
1306 * z8k-dis.c (print_insn_z8001): Declare return type.
1307 (print_insn_z8002): Likewise.
1308 (unparse_instr): Fix sprintf format strings.
1310 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1312 * mips-opc.c: Add "sync.l" and "sync.p".
1315 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1317 * dvp-opc.c (extract_vif_datalen): Rewrite.
1318 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1320 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1322 * dvp-dis.c (print_insn): Print unpack address in hex.
1323 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1324 Don't skip over '*', just record it.
1325 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1326 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1327 Don't skip over '*', just record it.
1328 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1329 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1330 (vif_opcodes): Likewise.
1331 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1332 (vif_macros,vif_macro_count): New globals.
1333 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1334 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1335 (vif_get_wl_cl): New function.
1336 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1339 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1341 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1342 default m68k variant to recognize.
1344 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1345 (ctrl, cobr, mem, ea): Likewise.
1346 (print_addr): Likewise. Remove cast.
1347 (ea): Cast argument of print_addr to bfd_vma.
1349 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1351 (cgen_parse_unsigned_integer): Likewise.
1352 (cgen_parse_address): Likewise.
1354 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1356 * i960-dis.c (ctrl): Add full braces to structure initialization.
1357 (cobr, mem, reg): Likewise.
1358 (ea): Correct parenthesization in expression.
1360 * cgen-asm.c: Include <ctype.h>.
1361 (build_asm_hash_table): Remove unused local variable i.
1362 (cgen_parse_keyword): Add casts to avoid warnings.
1364 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1365 symbol. Fix indentation.
1366 (print_insn_little_arm): Likewise.
1368 start-sanitize-r5900
1369 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1371 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1375 start-sanitize-m32rx
1376 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1378 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1383 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1385 * dvp-opc.c (vif_operand_datalen_special): New global.
1388 start-sanitize-r5900
1389 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1391 * vu0.h (vcallms): Use 'O' for call target operand.
1392 * mips-dis.c (print_insn_arg): Handle 'O'.
1395 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1397 * configure.in: Use AM_DISABLE_SHARED.
1398 * aclocal.m4, configure: Rebuild with libtool 1.2.
1400 start-sanitize-r5900
1401 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1403 * mips-dis.c: Change '%' to '#' in r5900 support.
1407 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1409 These patches are courtesy of Jonathan Walton and Tony Thompson
1410 (athompso@cambridge.arm.com).
1412 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1415 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1416 both the offset and the label closest to the destination.
1418 start-sanitize-r5900
1419 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1421 * vu0.h: New file with cop2/vu0 instructions.
1422 * mips-opc.c: Include vu0.h.
1423 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1425 (print_insn_mips): Do not emit a tab after an instruction if the
1426 first arg is an instruction completer (&). If the next arg is an
1427 escape character (%), then print the next arg verbatim.
1428 * Makefile.am (mips-opc.lo): Depend on vu0.h
1432 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1434 * dvp-opc.c (vif_opcodes): Add stcycl.
1436 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1438 * dvp-dis.c (print_dma): Change length from 16 to 8.
1441 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1443 * m32r-opc.h: Regenerate.
1446 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1448 * dvp-opc.c (print_dest1): Print dest spec again.
1449 (print_vfreg,print_accdest): Likewise.
1450 (vif_unpack_len): Round result up to word boundary.
1453 start-sanitize-vr4320
1454 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1456 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1458 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1460 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1465 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1467 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1468 (print_insn): Do mask comparison on proper opcode word.
1469 Print unsigned values in hex.
1470 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1471 (parse_bc): Catch missing dest.
1472 (parse_vfreg): Replace atoi call with strtol.
1473 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1474 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1475 (extract_gif_eop): New function.
1476 (gif_operands): Update eop entry.
1477 (VGIFOP,VGIFNREGS): Fix calcs.
1478 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1479 (gif_regs): Add entry for unused 11 case.
1480 (print_gif_regs): Print empty list instead of nothing.
1481 (extract_gif_nloop): Fix value calc.
1482 (print_gif_nloop): Always print value, even if 0.
1483 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1484 (vif_operands): Use them for wl,cl fields.
1485 (state_vif_wl,state_vif_cl): New static locals.
1486 (parse_vif_mode): Handle numeric args.
1487 (vif_unpack_len_value,vif_unpack_len): New functions.
1488 (vif_insn_len): Call vif_unpack_len.
1491 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1493 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1495 start-sanitize-cygnus
1496 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1498 * cgen-asm.in: Move insertion of generated routines to top of file.
1499 (insert_normal): Add prototype. Delete `shift' arg.
1500 * cgen-dis.in: Move insertion of generated routines to top of file.
1501 (extract_normal): Add prototype. Delete `shift' arg.
1502 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1503 (print_keyword): Add prototype. Fix type of `attrs' arg.
1506 start-sanitize-vr4320
1507 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1509 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1510 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1513 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1515 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1516 assume that info->symbols is non-empty.
1518 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1520 * alpha-opc.c (cvtqs) There is no such thing.
1521 (cvttq): Missing most of the /*d variants.
1523 start-sanitize-r5900
1524 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1526 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1528 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1529 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1532 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1534 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1535 delayed branches or jumps.
1538 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1540 * dvp-opc.c (vif_operands): Add unpack[u] support.
1541 (vif_opcodes): Ditto.
1542 (*_vif_imrubits): Renamed from *_vif_imrbits.
1544 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1546 * dvp-dis.c (print_insn): Handle word number.
1547 Handle mips address vs vu address.
1548 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1549 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1550 ({insert,extract}_dma_addr): Fix word ofset.
1551 ({insert,print}_gif_regs): Fix encode/decode.
1554 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1556 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1558 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1559 * tic30-dis.c (print_branch): Likewise.
1561 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1562 * dvp-dis.c (dvp_info_mach_type): New function.
1563 (print_insn_dvp): Call it.
1564 (print_vif): Return length of 4 if mpg or direct insn so following
1565 insns get properly disabled.
1566 (print_gif): Fix word order.
1567 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1568 (gif_operands): Fix word order.
1569 (gif_opcodes): Likewise.
1570 ({insert,extract,print}_gif_regs): Likewise.
1571 (gif_regs): Add new register number/name changes.
1572 (dma_opcodes): Add dmarefe insn.
1575 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1577 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1578 saved_symbol code as it is no longer needed.
1580 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1582 * cgen-asm.c: Include symcat.h.
1583 * cgen-dis.c,cgen-opc.c: Ditto.
1584 start-sanitize-cygnus
1585 * cgen-asm.in,cgen-dis.in: Ditto.
1587 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1590 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1592 * dvp-opc.c (extra_dma_flags): Fix typos.
1593 (dma_operands): Fix word numbers.
1594 (dma_opcodes): Likewise.
1595 ({insert,extract}_dma_flags): Likewise.
1598 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1600 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1603 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1605 * dvp-dis.c (print_gif): Complete.
1606 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1607 (state_gif_{nregs,regs,nloop}): New static locals.
1608 (*_gif_*): Complete.
1609 (dvp_opcode_init_{parse,print}): Init gif state locals.
1610 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1611 (vif_insn_len): Handle `unpack'.
1612 ({insert,extract}_dma_flags): Complete.
1615 start-sanitize-r5900
1616 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1618 * mips-opc.c (mula.s): Renamed from multa.s.
1621 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1623 * m32r-opc.[ch]: Regenerate.
1626 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1628 * dvp-opc.c (dma_operands): Rewrite.
1629 (dma_operand_{count,addr}): New globals.
1630 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1631 (insert_dma_addr): Insert value into insn.
1632 (extract_dma_addr): Extract value from insn.
1634 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1636 * dvp-dis.c (print_vu): Handle loi insns.
1637 (print_insn): Likewise.
1638 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1639 (vu_operands): Make LDEST1 a FAKE operand.
1640 (parse_dest1): Allow elided argument.
1641 (print_dest1): Don't print the argument.
1643 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1645 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1646 (print_vfreg): Don't print dest spec.
1647 (parse_accdest): Dest spec is optional.
1648 (print_accdest): Don't print dest spec.
1651 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1653 start-sanitize-cygnus
1654 * Makefile.am (CGENFILES): Update.
1655 * Makefile.in: Regenerate.
1656 * cgen-asm.in (insert_normal): Result is error message now.
1657 Validate value to be inserted.
1658 (insert_insn_normal): Result is error message now.
1659 (@arch@_cgen_assemble_insn): Update.
1661 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1662 arguments. Don't perform validation here.
1663 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1665 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1667 start-sanitize-cygnus
1668 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1669 operand instance list.
1671 * m32r-opc.c: Regenerate.
1673 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1675 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1676 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1678 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1680 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1682 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1684 * configure.in: Get the version number from BFD.
1685 * configure: Rebuild.
1687 From H.J. Lu <hjl@gnu.org>:
1688 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1689 * Makefile.in: Rebuild.
1691 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1693 * m32r-opc.c: Regenerate.
1694 * m32r-opc.h: Regenerate.
1696 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1698 start-sanitize-cygnus
1699 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1700 Ignore ALIAS insns if asked to.
1701 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1703 * m32r-opc.c: Regenerate.
1706 * dvp.opc.c: Nicely format opcode tables.
1707 (vu_operands): New element UFLAGS.
1708 (parse_uflags,print_uflags): New functions.
1709 (vu_upper_opcodes): Add UFLAGS to all insns.
1712 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1714 Fix rac to accept only a0:
1715 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1716 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1717 Introduce OPERAND_GPR.
1718 * d10v-dis.c (print_operand): Likewise.
1720 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1722 start-sanitize-cygnus
1723 * cgen-opc.in: New file.
1724 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1725 * Makefile.am (CGENFILES): Add cgen-opc.in.
1726 * Makefile.in: Regenerate.
1727 * cgen-dis.in (*): Use PTR instead of void *.
1728 (print_insn): Delete unused vars `i', `syntax'.
1730 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1731 (cgen_hw_lookup): Make result const.
1732 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1735 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1737 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1738 (vif_opcodes): Update renamed insns.
1739 * dvp-dis.c (*): Likewise.
1742 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1744 * configure, aclocal.m4: Rebuild with new libtool.
1746 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1748 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1749 instructions use a PC relative branch, not absolute.
1751 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1753 * configure.in: Set libtool_enable_shared rather than
1754 libtool_shared. Remove diversion hack.
1755 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1757 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1759 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1760 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1762 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1764 * tic30-dis.c: New file.
1765 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1766 * configure.in: Handle bfd_tic30_arch.
1767 * Makefile.am: Rebuild dependencies.
1768 (CFILES): Add tic30-dis.c
1769 (ALL_MACHINES): Add tic30-dis.lo.
1770 * configure, Makefile.in: Rebuild.
1772 start-sanitize-m32rx
1773 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1775 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1776 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1777 macwhi-a and macwlo-a instructions.
1781 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1783 * dvp-opc.c, fixed encoding of a bunch of instructions to
1784 be consistent with the asmvu assembler (and inconsistent
1785 with the specification).
1787 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1789 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1790 in the opcode table. The pkemscalf instruction must come first.
1792 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1794 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1797 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1799 * m32r-opc.h (HAVE_CPU_M32R): Define.
1802 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1804 * dvp-dis.c, dvp-opc.c: New files.
1805 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1806 * configure: Regenerate.
1807 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1808 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1809 (mips-dis.lo): Compile with @archdefs@.
1810 * Makefile.in: Regenerate.
1811 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1812 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1815 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1817 * v850-opc.c (insertion routines): If both alignment and size is
1818 wrong then report this.
1820 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1822 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1823 Only recognize instructions for the current target_processor.
1825 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1827 * d10v-dis.c (PC_MASK): Correct value.
1828 (print_operand): If there's a reloc, don't calculate the
1829 address because they could be in different sections.
1831 start-sanitize-cygnus
1832 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1834 * cgen.sh: Rewrite to be like simulator's version.
1835 * Makefile.am (cgen): Update call to cgen.sh.
1836 * Makefile.in: Regenerate
1839 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1841 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1842 instruction after the 4650's "mul" instruction; nobody's using the
1843 4010 these days. If object files someday indicate which processor
1844 variant they're intended for, we can do a better job at this.
1846 start-sanitize-r5900
1847 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1849 * mips-opc.c (c.lt.s): Add r5900 variant.
1853 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1855 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1856 table provided entry size. Use CGEN_INSN_MNEMONIC.
1857 (cgen_parse_keyword): Rewrite.
1858 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1859 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1860 * cgen-opc.c: Clean up pass over `struct foo' usage.
1861 (cgen_keyword_lookup_value): Handle "" entry.
1862 (cgen_keyword_add): Likewise.
1863 start-sanitize-cygnus
1864 * Makefile.am: Add cgen support.
1865 * Makefile.in: Regenerate.
1866 * configure.in: Add cgen support.
1867 * configure: Regenerate.
1868 * aclocal.m4: Regenerate.
1869 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1872 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1874 * mips-opc.c: Add FP_D to s.d instruction flags.
1876 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1878 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1880 start-sanitize-tic80
1881 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1883 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1884 PC relative offset forms before the 15 bit forms. An assembler command
1885 line option now chooses the default.
1888 start-sanitize-r5900
1889 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1891 * mips-opc.c: Add many missing r5900 instructions.
1894 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1896 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1897 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1899 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1901 * configure: Only build libopcodes shared if --enable-shared's value
1902 was `yes', or was set to `*opcodes*'.
1903 * aclocal.m4: Likewise.
1904 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1905 original source of this bit of code. It's not clear what the best fix
1908 start-sanitize-r5900
1909 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1911 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1913 start-sanitize-tic80
1914 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1916 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1917 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1918 offset forms before the 15 bit forms, to default to the long forms.
1921 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1923 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1925 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1927 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1928 symbol if none is present.
1929 (print_insn_big_arm): Prevent examination of stored symbol if
1932 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1934 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1936 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1938 * disassemble.c: Remove disasm_symaddr() function.
1940 * arm-dis.c: Use info->symbol instead of info->flags to determine
1941 if disassmbly should be in Thumb or Arm mode.
1943 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1945 * arm-dis.c: Add support for disassembling Thumb opcodes.
1946 (print_insn_thumb): New function.
1948 * disassemble.c (disasm_symaddr): New function.
1950 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1951 (thumb_opcodes): Table of Thumb opcodes.
1953 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1955 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1957 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1958 and 'v' as operand types.
1960 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1962 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1963 <olivier.carmona@di.epfl.ch>.
1964 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1965 which has a two word opcode with a one word argument.
1967 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1969 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1970 unsigned, not signed.
1971 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1973 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1975 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1976 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1977 (ftrv): Slay the cut-and-paste monster.
1979 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1981 * d10v-dis.c (print_operand):
1982 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1984 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1986 * d10v-opc.c (OPERAND_FLAG): Split into:
1987 (OPERAND_FFLAG, OPERAND_CFLAG) .
1991 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1993 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1994 field for all INSN_MACRO's.
1995 * mips16-opc.c: same
1997 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1999 * mips-opc.c (sync,cache): These are 3900 insns.
2001 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2003 sh-opc.h (sh_table): Remove ftst/nan.
2005 start-sanitize-cygnus
2006 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
2008 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
2009 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
2011 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
2015 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
2017 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
2018 Add tx49 insns and configury.
2021 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2023 * mips-opc.c (ffc, ffs): Fix mask.
2025 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2027 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2030 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2032 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2033 start-sanitize-cygnus
2034 Added VR5400 instructions.
2035 (N5): New cpu-id macro.
2037 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2039 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2041 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2042 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2044 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2046 * v850-dis.c (disassemble): Replace // with /* ... */
2048 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2050 * sparc-opc.c: Add wr & rd for v9a asr's.
2051 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2052 (v9a_asr_reg_names): New variable.
2053 Patch from David Miller <davem@vger.rutgers.edu>.
2055 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2057 * sparc-opc.c (v9notv9a): New insn type.
2058 (IMPDEP): Move to the end to not conflict with edge8 et al.
2059 Patch from David Miller <davem@vger.rutgers.edu>.
2061 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2063 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2065 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2067 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2069 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2071 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2072 of disassemble_info structure to determine if an overlay address
2073 has a matching symbol in low memory.
2075 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2076 new symbol_at_address_func field in disassemble_info structure.
2078 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2080 * v850-opc.c (extract_d22): Use signed arithmatic.
2082 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2084 * mips-opc.c: Three op mult is not an ISA insn.
2086 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2088 * mips-opc.c: Fix formatting.
2090 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2092 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2093 than assuming that char is signed. Explicitly sign extend 16 bit
2094 values, rather than assuming that short is 16 bits.
2095 (OP_sI, OP_J, OP_DIR): Likewise.
2097 start-sanitize-v850e
2098 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2100 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2104 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2106 * v850-opc.c: Fix typo in comment.
2108 * v850-dis.c (disassemble): Add test of processor type when
2109 determining opcodes.
2111 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2113 * configure.in: Use a diversion to set enable_shared before the
2114 arguments are parsed.
2115 * configure: Rebuild.
2117 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2119 * m68k-opc.c (TBL1): Use ! rather than `.
2120 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2122 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2124 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2126 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2128 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2131 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2132 * aclocal.m4: Rebuild with new libtool.
2133 * configure: Rebuild.
2135 start-sanitize-v850e
2136 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2138 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2141 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2143 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2145 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2147 * v850-opc.c (v850_opcodes): Further rearrangements.
2149 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2151 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2153 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2155 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2158 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2160 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2162 * mips16-opc.c: Added mips16 sdbbp.
2165 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2167 * v850-opc.c: Initialise processors field of v850_opcode structure.
2169 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2171 Merge changes from Martin Hunt:
2173 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2175 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2176 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2177 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2179 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2181 * d30v-dis.c (print_insn): First operand of d*i (delayed
2182 branch) instructions is relative.
2184 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2185 (d30v_operand_table): Add IMM6S3 type.
2186 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2188 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2189 and cmp instructions.
2191 * d30v-opc.c: Correct entries for repeat*, and sat*.
2192 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2193 types. Correct several formats.
2195 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2197 * d30v-opc.c (pre_defined_registers): Change control registers.
2199 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2200 SHORT_C2. Manual was incorrect.
2202 * d30v-dis.c (lookup_opcode): Return value now indicates
2203 if an opcode has a short and a long form. Used for deciding
2204 to append a ".s" or ".l".
2205 (print_insn): Append a ".s" to an instruction if it is
2206 the short form and ".l" if it is a long form. Do not append
2207 anything if the instruction has only one possible size.
2209 * d30v-opc.c: Change mulx2h to require an even register.
2210 New form: SHORT_A2; a SHORT_A form that needs an even
2211 register as the first operand.
2213 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2214 instruction was not being disassembled if there were an odd
2215 number of instructions.
2217 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2219 start-sanitize-v850e
2220 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2222 * v850-dis.c (disassemble): Improved display of register lists.
2225 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2227 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2228 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2229 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2230 fandnot1s, fandnot2s.
2232 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2234 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2236 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2238 * cgen-asm.c (cgen_parse_address): New argument resultp.
2239 All callers updated.
2240 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2242 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2244 * mn10200-dis.c (disassemble): PC relative instructions are
2245 relative to the next instruction, not the current instruction.
2247 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2249 * v850-dis.c (disassemble): Only signed extend values that are not
2250 returned by extract functions.
2251 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2253 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2255 * v850-opc.c: Update comments. Remove use of
2256 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2258 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2260 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2262 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2264 * configure: Rebuilt with latest devo autoconf for NT support.
2266 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2268 * v850-dis.c (disassemble): Use curly brace syntax for register
2271 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2272 where r0 is being used as a destination register.
2274 start-sanitize-v850e
2275 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2277 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2280 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2282 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2283 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2284 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2285 Add insns to access SGR and DBR.
2286 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2288 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2290 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2292 start-sanitize-v850e
2293 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2295 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2296 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2299 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2301 * configure (cgen_files): Add support for v850e target.
2302 * configure.in (cgen_files): Add support for v850e target.
2304 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2306 * configure (cgen_files): Add support for v850ea target.
2307 * configure.in (cgen_files): Add support for v850ea target.
2310 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2312 * configure.in (bfd_arc_arch): Add.
2313 * configure: Rebuild.
2314 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2315 * Makefile.in: Rebuild.
2316 * arc-dis.c, arc-opc.c: New files.
2317 * disassemble.c (ARCH_all): Define ARCH_arc.
2318 (disassembler): Add ARC support.
2320 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2322 start-sanitize-v850e
2323 * v850-dis.c (disassemble): Add support for v850EA instructions.
2325 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2326 (v850_opcodes): Add v850EA instructions.
2328 * v850-dis.c (disassemble): Add support for v850E instructions.
2330 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2331 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2332 insert_spe, extract_spe): New Functions.
2333 (v850_opcodes): Add v850E instructions.
2336 * v850-opc.c: Reorganised and re-layed out to improve readability
2339 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2341 * configure: Rebuild with autoconf 2.12.1.
2343 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2345 * aclocal.m4, configure: Rebuild with new automake patches.
2347 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2349 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2350 * acinclude.m4: Just include acinclude.m4 from BFD.
2351 * aclocal.m4, configure: Rebuild.
2353 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2355 * Makefile.am: New file, based on old Makefile.in.
2356 * acconfig.h: New file.
2357 * acinclude.m4: New file.
2358 * stamp-h.in: New file.
2359 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2360 Removed shared library handling; now handled by libtool. Replace
2361 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2362 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2363 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2364 handling in AC_OUTPUT.
2365 * dep-in.sed: Change .o to .lo.
2366 * Makefile.in: Now built with automake.
2367 * aclocal.m4: Now built with aclocal.
2368 * config.in, configure: Rebuild.
2370 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2372 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2374 start-sanitize-r5900
2375 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2377 * mips-opc.c: Fix coding of mtsa.
2380 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2382 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2384 * sparc-dis.c (sorted_opcodes): New static local.
2385 (struct opcode_hash): `opcode' is pointer to const element.
2386 (build_hash): First arg is now table of sorted pointers.
2387 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2388 (compare_opcodes): Update.
2390 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2392 * cgen-opc.c: #include <ctype.h>.
2393 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2394 Handle case insensitive hashing.
2395 (hash_keyword_value): Change type of `value' to unsigned int.
2397 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2399 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2400 precision FP, mark it as such. Likewise for double precision
2401 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2403 start-sanitize-r5900
2404 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2407 start-sanitize-r5900
2408 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2410 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2411 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2414 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2416 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2418 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2419 nesting depth when all the macros are expanded.
2421 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2423 * sparc-opc.c: The fcmp v9a instructions take an integer register
2424 as a destination, not a floating point register. From Christian
2425 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2427 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2429 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2430 syntax. From Roman Hodek
2431 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2433 * i386-dis.c (twobyte_has_modrm): Fix pand.
2435 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2437 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2439 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2441 * arm-dis.c: Add prototypes for arm_decode_shift and
2444 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2446 * mips-opc.c: Add r3900 insns.
2448 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2450 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2451 print delay slot instructions on the same line. When using a PC
2452 relative load, add a comment with the value being loaded if it can
2455 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2457 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2458 to pushS/popS for segment regs and byte constant so that
2459 pushw/popw printed when in 16 bit data mode.
2461 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2462 print cbtw, cwtd in 16 bit data mode.
2463 * i386-dis.c (putop): extra case W to support above.
2465 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2466 address size prefix in 16 bit address mode.
2468 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2470 * sh-dis.c: Reindent. Rename local variable fprintf to
2473 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2475 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2477 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2479 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2481 * mips16-opc.c (mip16_opcodes): same.
2483 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2485 * m68k-opc.c (moveb): Change $d to %d.
2487 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2489 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2490 (twobyte_has_modrm): Likewise.
2492 (OP_MMX, OP_EM, OP_MS): New static functions.
2494 * i386-dis.c: Revert patch of April 4. The output now matches
2497 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2499 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2502 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2504 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2506 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2508 * Makefile.in (install): Depend upon installdirs.
2509 (installdirs): New target.
2511 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2513 From Thomas Graichen <graichen@rzpd.de>:
2514 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2515 * configure: Rebuild.
2517 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2519 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2520 Delete string{,s}.h support.
2522 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2524 * cgen-asm.c (cgen_parse_operand_fn): New global.
2525 (cgen_parse_{{,un}signed_integer,address}): Update call to
2526 cgen_parse_operand_fn.
2527 (cgen_init_parse_operand): New function.
2528 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2529 from cgen_asm_init_parse.
2530 (m32r_cgen_assemble_insn): New operand `errmsg'.
2531 Delete call to as_bad, return error message to caller.
2532 (m32r_cgen_asm_hash_keywords): #if 0 out.
2534 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2536 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2538 [case 'J']: Fix typo in register name.
2540 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2542 * configure.in: Substitute SHLIB_LIBS.
2543 * configure: Rebuild.
2544 * Makefile.in (SHLIB_LIBS): New variable.
2545 ($(SHLIB)): Use $(SHLIB_LIBS).
2547 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2549 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2551 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2553 * disassemble.c (disassembler): Handle m32r.
2555 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2557 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2558 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2559 * Makefile.in (CFILES): Add them.
2560 (ALL_MACHINES): Add them.
2561 (dependencies): Regenerate.
2562 * configure.in (cgen_files): New variable.
2563 (bfd_m32r_arch): Add entry.
2564 * configure: Regenerate.
2566 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2568 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2569 * configure: Rebuild.
2571 * Makefile.in: Rebuild dependencies.
2573 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2575 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2578 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2580 * Branched binutils 2.8.
2582 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2584 * m10200-dis.c: Rename from mn10200-dis.c.
2585 * m10200-opc.c: Rename from mn10200-opc.c.
2586 * m10300-dis.c: Rename from mn10300-dis.c
2587 * m10300-opc.c: Rename from mn10300-opc.c.
2588 * Makefile.in: Update accordingly.
2590 * mips16-opc.c: Add mul and dmul macros.
2592 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2594 * makefile.vms: Update CFLAGS, add clean target.
2596 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2598 * mips-opc.c: Add "wait". From Ralf Baechle
2599 <ralf@gnu.ai.mit.edu>.
2601 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2602 * configure, config.in: Rebuild.
2603 * sysdep.h: Include <stdlib.h> if it exists.
2604 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2606 * Makefile.in: Rebuild dependencies.
2608 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2610 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2611 Andrew Bray <andy@madhouse.demon.co.uk>.
2613 * mips-opc.c: Add cast when setting mips_opcodes.
2615 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2617 * v850-dis.c (disassemble): Fix sign extension problem.
2618 * v850-opc.c (extract_d*): Fix sign extension problems to make
2619 disassembly calculate branch offsets correctly.
2621 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2623 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2625 * mips-opc.c: Add dctr and dctw.
2627 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2629 * d30v-dis.c (print_insn): Change the way signed constants
2632 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2634 * Makefile.in (BFD_H): New variable.
2635 (HFILES): New variable.
2636 (CFILES): Add all C files.
2637 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2638 Delete old dependencies, and build new ones.
2639 * dep-in.sed: New file.
2641 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2643 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2645 start-sanitize-coldfire
2646 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2648 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2651 end-sanitize-coldfire
2652 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2654 * mn10200-opc.c: Change "trap" to "syscall".
2655 * mn10300-opc.c: Add new "syscall" instruction.
2657 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2659 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2660 mulul insns on the coldfire.
2662 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2664 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2665 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2666 (print_insn_little_arm): Likewise.
2668 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2670 Based on patches from H.J. Lu <hjl@lucon.org>:
2671 * i386-dis.c (fetch_data): Add prototype.
2672 * m68k-dis.c (fetch_data): Add prototype.
2673 (dummy_print_address): Add prototype. Make static.
2674 * ppc-opc.c (valid_bo): Add prototype.
2675 * sparc-dis.c (build_hash_table): Add prototype.
2676 (is_delayed_branch, compute_arch_mask): Add prototypes.
2677 (print_insn_sparc): Make several local variables const.
2678 (compare_opcodes): Change arguments to const PTR. Add prototype.
2679 * sparc-opc.c (arg): Change name field to be const.
2680 (lookup_name, lookup_value): Add prototypes. Change table and
2681 name parameters to be const.
2682 (sparc_encode_asi): Change name parameter to be const.
2683 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2684 (sparc_encode_sparclet_cpreg): Likewise.
2685 (sparc_decode_asi): Change return type to be const.
2686 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2687 (sparc_decode_sparclet_cpreg): Likewise.
2689 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2691 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2692 Solaris doesn't like the combined options, and the -f is
2694 (stamp-tshlink, install): Likewise.
2696 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2698 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2701 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2703 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2705 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2707 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2710 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2712 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2714 start-sanitize-tic80
2715 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2717 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2719 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2721 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2724 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2726 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2727 floatformat_to_double to make portable.
2728 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2731 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2733 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2734 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2736 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2738 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2739 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2741 start-sanitize-tic80
2742 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2744 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2745 (OFF_SL_BR_SCALED): ... to this, and added the flag
2746 TIC80_OPERAND_BASEREL to the flags word.
2747 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2751 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2753 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2754 Change mips_opcodes from const array to a pointer,
2755 and change bfd_mips_num_opcodes from const int to int,
2756 so that we can increase the size of the mips opcodes table
2759 start-sanitize-tic80
2760 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2762 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2763 store BITNUM values in the table in one's complement form
2764 to match behavior when assembler is given a raw numeric
2765 value for a BITNUM operand.
2766 * tic80-dis.c (print_operand_bitnum): Ditto.
2769 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2771 * d30v-opc.c: Removed references to FLAG_X.
2773 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2775 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2777 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2779 * Makefile.in: Added d30v object files.
2780 * configure: (bfd_d30v_arch) Rebuilt.
2781 * configure.in: (bfd_d30v_arch) Added new case.
2782 * d30v-dis.c: New file.
2783 * d30v-opc.c: New file.
2784 * disassemble.c (disassembler) Add entry for d30v.
2786 start-sanitize-tic80
2787 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2789 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2790 representations for the floating point BITNUM values.
2792 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2794 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2795 in the table in one's complement form, as they appear in the
2797 (tic80_symbol_to_value): Use macros to access predefined
2799 (tic80_value_to_symbol): Ditto.
2800 (tic80_next_predefined_symbol): New function.
2801 * tic80-dis.c (print_operand_bitnum): Remove code that did
2802 one's complement for BITNUM values.
2805 start-sanitize-r5900
2806 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2808 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2811 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2813 * makefile.vms: Remove 8 bit characters. Update to latest
2816 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2818 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2820 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2822 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2823 (IMM24_PCREL): Likewise.
2825 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2827 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2828 address for an extended PC relative instruction that is not a
2831 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2833 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2836 start-sanitize-tic80
2837 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2839 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2840 (tic80_opcodes): Sort entries so that long immediate forms
2841 come after short immediate forms, making it easier for
2842 assembler to select the right one for a given operand.
2845 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2847 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2849 (print_insn_mips16): Likewise.
2851 start-sanitize-r5900
2852 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2854 * mips-opc.c: add r5900.
2857 start-sanitize-tic80
2858 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2860 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2861 a symbol class that restricts translation to just that
2862 class (general register, condition code, etc).
2864 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2866 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2867 and REG_DEST_E for register operands that have to be
2868 an even numbered register. Add REG_FPA for operands that
2869 are one of the floating point accumulator registers.
2870 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2871 (tic80_opcodes): Change entries that need even numbered
2872 register operands to use the new operand table entries.
2873 Add "or" entries that are identical to "or.tt" entries.
2876 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2878 * mips16-opc.c: Add new cases of exit instruction for
2880 * mips-dis.c (print_mips16_insn_arg): Display floating point
2881 registers in operands of exit instruction. Print `$' before
2882 register names in operands of entry and exit instructions.
2884 start-sanitize-tic80
2885 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2887 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2888 pairs for all predefined symbols recognized by the assembler.
2889 Also used by the disassembling routines.
2890 (tic80_symbol_to_value): New function.
2891 (tic80_value_to_symbol): New function.
2892 * tic80-dis.c (print_operand_control_register,
2893 print_operand_condition_code, print_operand_bitnum):
2894 Remove private tables and use tic80_value_to_symbol function.
2897 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2899 * d10v-dis.c (print_operand): Change address printing
2900 to correctly handle PC wrapping. Fixes PR11490.
2902 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2904 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2907 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2909 * mips-dis.c (print_insn_mips16): Set insn_info information.
2910 (print_mips16_insn_arg): Likewise.
2912 * mips-dis.c (print_insn_mips16): Better handling of an extend
2913 opcode followed by an instruction which can not be extended.
2915 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2917 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2918 coldfire moveb instruction to not allow an address register as
2919 destination. Although the documentation does not indicate that
2920 this is invalid, experiments uncovered unexpected behavior.
2921 Added a comment explaining the situation. Thanks to Andreas
2922 Schwab for pointing this out to me.
2924 start-sanitize-tic80
2925 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2927 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2928 entries are presorted so that entries with the same mnemonic are
2929 adjacent to each other in the table. Sort the entries for each
2930 instruction so that this is true.
2933 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2935 * m68k-dis.c: Include <libiberty.h>.
2936 (print_insn_m68k): Sort the opcode table on the most significant
2937 nibble of the opcode.
2939 start-sanitize-tic80
2940 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2942 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2943 "vsub", "vst", "xnor", and "xor" instructions.
2944 (V_a1): Renamed from V_a, msb of accumulator reg number.
2945 (V_a0): Add macro, lsb of accumulator reg number.
2947 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2949 * tic80-dis.c (print_insn_tic80): Broke excessively long
2950 function up into several smaller ones and arranged for
2951 the instruction printing function to be callable recursively
2952 to print vector instructions that have both a load and a
2953 math instruction packed into a single opcode.
2954 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2955 to explain why it comes after the other vector opcodes.
2958 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2960 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2961 move insns to handle immediate operands.
2963 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2965 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2966 fix operand mask in the "moveml" entries for the coldfire.
2968 start-sanitize-tic80
2969 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2971 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2972 New macros for building vector instruction opcodes.
2973 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2974 FMT_LI, which were unused. The field is now a flags field.
2975 Remove some opcodes that are possible, but illegal, such
2976 as long immediate instructions with doubles for immediate
2977 values. Add "vadd" and "vld" instructions.
2979 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2981 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2982 the order more logical. Move the shift alias instructions ("rotl",
2983 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2984 interspersed with the regular sr.x and sl.x instructions. Add
2985 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2986 "sub", "subu", "swcr", and "trap".
2988 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2990 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2991 (OFF_SL_PC): Renamed from OFF_SL.
2992 (OFF_SS_BR): New operand type for base relative operand.
2993 (OFF_SL_BR): New operand type for base relative operand.
2994 (REG_BASE): New operand type for base register operand.
2995 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2996 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2997 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2999 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3000 10 char field, padded with spaces on rhs, rather than a string
3001 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3002 than old TIC80_OPERAND_RELATIVE. Add support for new
3003 TIC80_OPERAND_BASEREL flag bit.
3005 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3007 * tic80-dis.c (print_insn_tic80): Print floating point operands
3009 * tic80-opc.c (SPFI): Add single precision floating point
3010 immediate operand type.
3011 (ROTATE): Add rotate operand type for shifts.
3012 (ENDMASK): Add for shifts.
3013 (n): Macro for the 'n' bit.
3014 (i): Macro for the 'i' bit.
3015 (PD): Macro for the 'PD' field.
3016 (P2): Macro for the 'P2' field.
3017 (P1): Macro for the 'P1' field.
3018 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3022 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3024 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3025 adding in current address for pc-relative operands.
3027 start-sanitize-tic80
3028 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3030 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3031 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3032 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3033 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3034 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3035 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3036 (REG_SCALED, LSI_SCALED): New operand types.
3037 (E): New macro for 'E' bit at bit 27.
3038 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3039 opcodes, including the various size flavors (b,h,w,d) for
3040 the direct load and store instructions.
3042 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3044 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3046 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3047 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3048 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3049 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3050 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3051 masks with "MASK_* & ~M_*" to get the M bit reset.
3052 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3054 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3056 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3057 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3058 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3060 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3061 CC, SICR, and LICR table entries.
3062 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3063 "bcnd", and "brcr" opcodes.
3066 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3068 * ppc-opc.c (powerpc_operands): Make comment match the
3069 actual fields (no shift field).
3070 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3071 start-sanitize-tic80
3072 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3073 partial implementation, work in progress.
3074 * tic80-opc.c (tic80_operands): Begin construction operands table.
3075 (tic80_opcodes): Continue populating opcodes table and start
3076 filling in the operand indices.
3077 (tic80_num_opcodes): Add this.
3080 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3082 * m68k-opc.c: Add #B case for moveq.
3084 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3086 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3087 before they are used.
3089 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3091 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3092 for "breakpoint" instruction.
3094 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3096 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3097 (dep): Use ALL_CFLAGS rather than CFLAGS.
3099 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3101 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3104 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3106 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3107 start-sanitize-tic80
3108 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3111 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3113 * mips16-opc.c: Add "abs".
3115 start-sanitize-tic80
3116 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3118 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3119 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3120 (disassembler): Add bfd_arch_tic80 support to set disassemble
3121 to print_insn_tic80.
3122 * tic80-dis.c (print_insn_tic80): Add stub.
3124 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3126 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3127 * configure: Regenerate with autoconf.
3128 * tic80-dis.c: Add file.
3129 * tic80-opc.c: Add file.
3132 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3134 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3136 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3138 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3139 (mn10200_opcodes): Use it for some logicals and btst insns.
3140 Add "break" and "trap" instructions.
3142 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3144 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3146 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3148 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3149 relative load or add now depends upon whether the instruction is
3152 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3154 * mn10200-dis.c: Finish writing disassembler.
3155 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3156 Fix mask for "jmp (an)".
3158 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3159 handle endianness issues for mn10300.
3161 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3163 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3165 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3166 instruction. Fix opcode field for "movb (imm24),dn".
3168 * mn10200-opc.c (mn10200_operands): Fix insertion position
3171 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3173 * mn10200-opc.c: Create mn10200 opcode table.
3174 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3175 but moving along nicely.
3177 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3179 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3181 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3183 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3184 specifiers for fmovem* instructions.
3186 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3188 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3190 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3192 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3195 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3197 * mn10300-opc.c: Add some comments explaining the various
3200 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3202 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3204 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3207 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3208 operand specifiers in fmovm* instructions.
3210 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * ppc-opc.c (insert_li): Give an error if the offset has the two
3213 least significant bits set.
3215 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * mips-dis.c (print_insn_mips16): Separate the instruction from
3218 the arguments with a tab, not a space.
3220 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3222 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3225 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3228 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3230 * configure: Rebuild with autoconf 2.12.
3232 Add support for mips16 (16 bit MIPS implementation):
3233 * mips16-opc.c: New file.
3234 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3235 (mips16_reg_names): New static array.
3236 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3237 after seeing a 16 bit symbol.
3238 (print_insn_little_mips): Likewise.
3239 (print_insn_mips16): New static function.
3240 (print_mips16_insn_arg): New static function.
3241 * mips-opc.c: Add jalx instruction.
3242 * Makefile.in (mips16-opc.o): New target.
3243 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3244 * configure: Rebuild.
3246 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3248 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3249 operand specifiers in *save, *restore and movem* instructions.
3251 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3254 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3255 register operands for immediate arithmetic, not, neg, negx, and
3256 set according to condition instructions.
3258 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3259 specifier of the effective-address operand in immediate forms of
3260 arithmetic instructions. The specifier for the immediate operand
3261 notes how and where the constant will be stored.
3263 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3265 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3268 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3271 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3273 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3275 * mn10300-dis.c (disassemble): Handle register lists.
3277 * mn10300-opc.c: Fix handling of register list operand for
3278 "call", "ret", and "rets" instructions.
3280 * mn10300-dis.c (disassemble): Print PC-relative and memory
3281 addresses symbolically if possible.
3282 * mn10300-opc.c: Distinguish between absolute memory addresses,
3283 pc-relative offsets & random immediates.
3285 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3287 (disassemble): Handle SPLIT and EXTENDED operands.
3289 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3291 * mn10300-dis.c: Rough cut at printing some operands.
3293 * mn10300-dis.c: Start working on disassembler support.
3294 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3296 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3298 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3300 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3302 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3304 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3306 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3307 register argument is calls and jmp instructions.
3309 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3311 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3312 getx operand. Fix opcode for mulqu imm,dn.
3314 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3316 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3317 in MN10300_OPERAND_SPLIT operands for how many bits
3318 appear in the basic insn word. Add IMM32_HIGH24,
3319 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3320 (mn10300_opcodes): Use new operands as needed.
3322 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3323 for bset, bclr, btst instructions.
3324 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3326 * mn10300-opc.c (mn10300_operands): Remove many redundant
3327 operands. Update opcode table as appropriate.
3328 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3329 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3331 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3333 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3334 operands (for indexed load/stores). Fix bitpos for DI
3335 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3336 few instructions that insert immediates/displacements in the
3337 middle of the instruction. Add IMM8E for 8 bit immediate in
3338 the extended part of an instruction.
3339 (mn10300_operands): Use new opcodes as appropriate.
3341 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3343 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3344 sequential so the assembler never parallelizes it with
3347 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3349 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3350 a data/address register that appears in register field 0
3351 and register field 1.
3352 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3354 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3356 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3357 standard disassembly.
3359 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3360 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3361 Recategorize PALcode instructions.
3363 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3365 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3367 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3369 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3370 there are no operand types.
3372 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3374 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3376 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3378 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3380 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3382 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3384 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3385 and sst.w instructions.
3387 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3390 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3392 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3395 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3397 * ppc-opc.c (PPCPWR2): Define.
3398 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3401 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3403 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3404 field for movhu instruction.
3406 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3407 cast value to "long" not "signed long" to keep hpux10
3410 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3412 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3415 * mn10300-opc.c (FMT*): Remove definitions.
3417 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3418 for shift-by-register opcodes.
3420 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3421 into [AD][MN][01] for encoding the position of the register
3424 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3426 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3427 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3429 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3431 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3432 Fix various typos. Add "PAREN" operand.
3433 (MEM, MEM2): Define.
3434 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3435 operands. Fix several typos.
3437 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3440 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3442 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3443 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3445 (mn10300_opcodes): Break opcode format out into its own field.
3446 Update many operand fields to deal with signed vs unsigned
3447 issues. Fix one or two typos in the "mov" instruction
3448 opcode, mask and/or operand fields.
3450 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3452 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3453 m68851 wasn't reset.
3455 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3457 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3458 all opcodes. Very rough cut at operands for all opcodes.
3460 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3463 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3465 * mn10200-opc.c, mn10300-opc.c: New files.
3466 * mn10200-dis.c, mn10300-dis.c: New files.
3467 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3468 * disassemble.c: Break mn10x00 support into 10200 and 10300
3470 * configure.in: Likewise.
3471 * configure: Rebuilt.
3473 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3475 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3477 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3479 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3481 * disassemble (ARCH_mn10x00): Define.
3482 (disassembler): Handle bfd_arch_mn10x00.
3483 * configure.in: Recognize bfd_mn10x00_arch.
3484 * configure: Rebuilt.
3486 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3488 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3489 accordingly. Don't declare functions using op_rtn.
3491 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3493 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3494 params to be more standard.
3495 * (disassemble): Print absolute addresses and symbolic names for
3496 branch and jump targets.
3497 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3499 * (v850_opcodes): Add breakpoint insn.
3501 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3503 * m68k-opc.c: Move the fmovemx data register cases before the
3504 other cases, so that they get recognized before the data register
3505 does gets treated as a degenerate register list.
3507 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3509 * mips-opc.c: Add a case for "div" and "divu" with two registers
3510 and a destination of $0.
3512 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3514 * mips-dis.c (print_insn_arg): Add prototype.
3515 (_print_insn_mips): Ditto.
3517 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3519 * mips-dis.c (print_insn_arg): Print condition code registers as
3522 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3524 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3526 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3528 * v850-dis.c (disassemble): Make static. Provide prototype.
3530 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3532 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3535 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3537 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3538 ']' characters into the output stream.
3539 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3540 Add "memop" field to all opcodes (for the disassembler).
3541 Reorder opcodes so that "nop" comes before "mov" and "jr"
3542 comes before "jarl".
3544 * v850-dis.c (print_insn_v850): Fix typo in last change.
3546 * v850-dis.c (print_insn_v850): Properly handle disassembling
3547 a two byte insn at the end of a memory region when the memory
3548 region's size is only two byte aligned.
3550 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3552 * v850-dis.c (v850_reg_names): Define.
3553 (v850_sreg_names, v850_cc_names): Likewise.
3554 (disassemble): Very rough cut at printing operands (unformatted).
3556 * v850-opc.c (BOP_MASK): Fix.
3557 (v850_opcodes): Fix mask for jarl and jr.
3559 * v850-dis.c: New file. Skeleton for disassembler support.
3560 * Makefile.in Remove v850 references, they're not needed here.
3561 * configure.in: Add v850-dis.o when building v850 toolchains.
3562 * configure: Rebuilt.
3563 * disassemble.c (disassembler): Call v850 disassembler.
3565 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3566 (insert_d8_6, extract_d8_6): New functions.
3567 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3568 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3570 (IF4A, IF4B): Use "D7" instead of "D7S".
3571 (IF4C, IF4D): Use "D8_7" instead of "D8".
3572 (IF4E, IF4F): New. Use "D8_6".
3573 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3574 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3576 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3577 (v850_operands): Change D16 to D16_15, use special insert/extract
3578 routines. New new D16 that uses the generic insert/extract code.
3579 (IF7A, IF7B): Use D16_15.
3580 (IF7C, IF7D): New. Use D16.
3581 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3583 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3584 message. Issue an error if the branch offset is odd.
3586 * v850-opc.c: Add notes about needing special insert/extract
3587 for all the load/store insns, except "ld.b" and "st.b".
3589 * v850-opc.c (insert_d22, extract_d22): New functions.
3590 (v850_operands): Use insert_d22 and extract_d22 for
3592 (insert_d9): Fix range check.
3594 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3596 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3597 and set bits field to D9 and D22 operands.
3599 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3601 * v850-opc.c (v850_operands): Define SR2 operand.
3602 (v850_opcodes): "ldsr" uses R1,SR2.
3604 * v850-opc.c (v850_opcodes): Fix opcode specs for
3605 sld.w, sst.b, sst.h, sst.w, and nop.
3607 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3609 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3610 end of the opcode table.
3612 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3614 * d10v-opc.c (pre_defined_registers): Added register pairs,
3615 "r0-r1", "r2-r3", etc.
3617 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3619 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3620 Create I16U for an unsigned 16bit mmediate operand.
3621 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3623 * v850-opc.c (v850_operands): Define EP operand.
3624 (IF4A, IF4B, IF4C, IF4D): Use EP.
3626 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3627 with immediate operand, "movhi". Tweak "ldsr".
3629 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3630 correct. Get sld.[bhw] and sst.[bhw] closer.
3632 * v850-opc.c (v850_operands): "not" is a two byte insn
3634 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3636 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3638 * v850-opc.c (two): Get order of words correct.
3640 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3642 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3643 register source and destination operands.
3644 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3646 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3647 same thinko in "trap" opcode.
3649 * v850-opc.c (v850_opcodes): Add initializer for size field
3652 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3653 Add D8 for 8-bit unsigned field in short load/store insns.
3654 (IF4A, IF4D): These both need two registers.
3655 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3656 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3657 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3658 for "ldsr" and "stsr".
3659 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3662 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3663 short store word (sst.w).
3665 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3667 * v850-opc.c (v850_operands): Added insert and extract fields,
3668 pointers to functions that handle unusual operand encodings.
3670 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3672 * v850-opc.c (v850_opcodes): Enable "trap".
3674 * v850-opc.c (v850_opcodes): Fix order of displacement
3675 and register for "set1", "clr1", "not1", and "tst1".
3677 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3679 * v850-opc.c (v850_operands): Add "B3" support.
3680 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3683 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3685 * v850-opc.c: Close unterminated comment.
3687 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3689 * v850-opc.c (v850_operands): Add flags field.
3690 (v850_opcodes): add move opcodes.
3692 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3694 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3695 * configure: (bfd_v850v_arch) Add new case.
3696 * configure.in: (bfd_v850_arch) Add new case.
3697 * v850-opc.c: New file.
3699 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3701 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3703 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3705 * d10v-opc.c: Add additional information to the opcode
3706 table to help determinine which instructions can be done
3709 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3711 * mpw-make.sed: Update editing of include pathnames to be
3714 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3716 * arm-opc.h: Added "bx" instruction definition.
3718 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3720 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3722 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3724 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3726 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3728 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3730 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3732 * makefile.vms: Update for alpha-opc changes.
3734 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3736 * i386-dis.c (print_insn_i386): Actually return the correct value.
3737 (ONE, OP_ONE): #ifdef out; not used.
3739 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3741 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3742 Changed subi operand type to treat 0 as 16.
3744 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3746 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3749 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3751 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3752 memory transfer instructions. Add new format string entries %h and %s.
3753 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3756 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3758 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3759 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3761 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3763 * alpha-dis.c (print_insn_alpha_osf): Remove.
3764 (print_insn_alpha_vms): Remove.
3765 (print_insn_alpha): Make globally visible. Chose the register
3766 names based on info->flavour.
3767 * disassemble.c: Always return print_insn_alpha for the alpha.
3769 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3771 * d10v-dis.c (dis_long): Handle unknown opcodes.
3773 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3775 * d10v-opc.c: Changes to support signed and unsigned numbers.
3776 All instructions with the same name that have long and short forms
3777 now end in ".l" or ".s". Divs added.
3778 * d10v-dis.c: Changes to support signed and unsigned numbers.
3780 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3782 * d10v-dis.c: Change all functions to use info->print_address_func.
3784 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3786 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3787 move ccr/sr insns more strict so that the disassembler only
3788 selects them when the addressing mode is data register.
3790 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3791 * d10v-opc.c (pre_defined_registers): Declare.
3792 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3793 to pick a better name for the registers.
3795 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3797 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3798 operands for fexpand and fpmerge. From Christian Kuehnke
3799 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3801 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3803 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3804 print routine. Take new regnames and cpumask arguments.
3805 Kill the environment variable nonsense.
3806 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3807 (print_insn_alpha_vms): New function. Do VMS style regnames.
3808 * disassemble.c (disassembler): Test bfd flavour to pick
3809 between OSF and VMS routines. Default to OSF.
3811 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3813 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3814 * configure: Rebuild.
3815 * Makefile.in (install): Use @INSTALL_SHLIB@.
3817 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3819 * configure: (bfd_d10v_arch) Add new case.
3820 * configure.in: (bfd_d10v_arch) Add new case.
3821 * d10v-dis.c: New file.
3822 * d10v-opc.c: New file.
3823 * disassemble.c (disassembler) Add entry for d10v.
3825 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3827 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3828 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3830 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3832 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3833 distinguish between variants of the instruction set.
3834 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3835 distinguish between variants of the instruction set.
3837 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3839 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3840 the 8086 instruction set.
3841 * i386-dis.c: General cleanups. Make most things static. Add
3842 prototypes. Get rid of static variables aflags and dflags. Pass
3843 them as args (to almost everything).
3845 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3847 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3849 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3851 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3852 if the next arg is marked with SRC_IN_DST. Gross.
3854 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3855 we're looking for and find EXR.
3857 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3858 if we're looking for KBIT and we don't find it.
3860 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3863 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3864 3bit immediate operands.
3866 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3868 * Released binutils 2.7.
3870 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3871 <kkaempf@progis.ac-net.de>.
3873 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3875 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3877 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3879 * sparc-dis.c (print_insn_sparclite): New routine to print
3880 sparclite instructions.
3882 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3884 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3886 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3888 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3889 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3890 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3892 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3894 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3895 Use autoconf-set values.
3896 (docdir, oldincludedir): Removed.
3897 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3899 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3901 * alpha-opc.c: New file.
3902 * alpha-opc.h: Remove.
3903 * alpha-dis.c: Complete rewrite to use new opcode table.
3904 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3905 * configure: Rebuild with autoconf 2.10.
3906 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3907 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3909 (alpha-opc.o): New target.
3911 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3913 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3914 Set imm_added_to_rs1 even if the source and destination register
3917 * sparc-opc.c: Add some two operand forms of the wr instruction.
3919 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3921 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3924 * disassemble.c (disassembler): Handle H8/S.
3925 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3927 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3929 * sparc-opc.c: Add beq/teq as aliases for be/te.
3931 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3932 <sergei@msil.sps.mot.com>.
3934 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3936 * makefile.vms: New file.
3938 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3940 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3942 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3945 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3947 * i386-dis.c (OP_OFF): Call append_prefix.
3949 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3951 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3952 unsigned long to silence a warning from the Solaris PowerPC
3955 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3957 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3959 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3961 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3963 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3964 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3965 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3966 cpush, cpusha, cpull sparclet insns.
3968 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3970 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3972 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3974 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3975 Set F_FLOAT on other floating point instructions.
3977 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3979 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3981 (powerpc_opcodes): Add 860/821 specific SPRs.
3983 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3985 * configure.in: Permit --enable-shared to specify a list of
3986 directories. Set and substitute BFD_PICLIST.
3987 * configure: Rebuild.
3988 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3989 uses. Set to @BFD_PICLIST@.
3991 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3993 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3994 not "abs", which may be needed for the absolute in something
3995 like btst #0,@10:8. Print L_3 immediates separately from other
3996 immediates. Change ABSMOV reference to ABS8MEM.
3998 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4000 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4001 (current_arch_mask): New static global.
4002 (compute_arch_mask): New static function.
4003 (print_insn_sparc): Delete sparc_v9_p. New static local
4004 current_mach. Resort opcode table if current_mach changes.
4005 Generalize "insn not supported" test.
4006 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4007 Delete test for v9/!v9.
4008 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4010 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4011 (brfcx): Renamed to FBRX.
4012 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4013 coprocessor mnemonics are not supported on the sparclet).
4014 (condf): Renamed to CONDF.
4015 (SLCBCC2): Delete F_ALIAS flag.
4017 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4019 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4020 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4022 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4024 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4025 that the shared library version number is set correctly.
4027 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4029 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4030 Miles Bader <miles@gnu.ai.mit.edu>.
4031 * configure: Rebuild.
4033 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4035 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4038 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4040 * configure: Rebuild with autoconf 2.8.
4042 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4044 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4045 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4047 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4049 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4050 since they appear as targets in Makefile.in.
4051 * configure: Rebuild.
4053 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4055 * mpw-make.sed: Edit out shared library support bits.
4057 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4059 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4060 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4061 (sparc_opcodes): Add sparclet insns.
4062 (sparclet_cpreg_table): New static local.
4063 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4064 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4066 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4068 * i386-dis.c (index16): New static variable.
4069 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4071 (OP_indirE): Return result of OP_E.
4072 (OP_E): Check for 16 bit addressing mode, and disassemble
4073 correctly. Optimised 32 bit case a little. Don't print
4074 "(base,index,scale)" when sib specifies only an offset.
4076 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4078 * configure.in: Set and substitute SHLIB_DEP.
4079 * configure: Rebuild.
4080 * Makefile.in (SHLIB_DEP): New variable.
4081 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4082 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4083 COMMON_SHLIB, add them to piclist with appropriate modifications.
4084 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4085 here: just use piclist.
4087 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4089 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4090 (print_insn_sparc): Rewrite v9/not-v9 tests.
4091 (compare_opcodes): Likewise.
4092 * sparc-opc.c (MASK_<ARCH>): Define.
4093 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4094 (sparclet,v6notv9): Define.
4095 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4096 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4098 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4100 * configure.in: Call AC_PROG_CC before configure.host.
4101 * configure: Rebuild.
4103 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4105 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4107 * i386-dis.c (onebyte_has_modrm): New static array.
4108 (twobyte_has_modrm): New static array.
4109 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4111 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4113 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4116 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4118 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4121 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4123 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4124 m68010up, not just m68020up | cpu32.
4126 * Makefile.in (SONAME): New variable.
4127 ($(SHLINK)): Make a link to the transformed name, as well.
4128 (stamp-tshlink): New target.
4129 (install): Skip stamp-tshlink during install.
4131 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4133 * configure.in: Call AC_ARG_PROGRAM.
4134 * configure: Rebuild.
4135 * Makefile.in (program_transform_name): New variable.
4136 (install): Transform library name before installing it.
4138 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4140 * i960-dis.c (mem): Add HX dcinva instruction.
4142 Support for building as a shared library, based on patches from
4143 Alan Modra <alan@spri.levels.unisa.edu.au>:
4144 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4145 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4146 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4147 * configure: Rebuild.
4148 * Makefile.in (ALLLIBS): New variable.
4149 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4150 (COMMON_SHLIB, SHLINK): New variables.
4151 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4152 (STAGESTUFF): Remove variable.
4153 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4154 (stamp-piclist, piclist): New targets.
4155 ($(SHLIB), $(SHLINK)): New targets.
4156 ($(OFILES)): Depend upon stamp-picdir.
4157 (disassemble.o): Build twice if PICFLAG is set.
4158 (MOSTLYCLEAN): Add pic/*.o.
4159 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4160 (distclean): Remove pic and stamp-picdir.
4161 (install): Install shared libraries.
4162 (stamp-picdir): New target.
4164 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4166 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4167 Print unknown instruction as "unknown", rather than in hex.
4169 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4171 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4173 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4175 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4177 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4179 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4180 when necessary. From Ulrich Drepper
4181 <drepper@myware.rz.uni-karlsruhe.de>.
4183 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4185 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4186 sparc_num_opcodes. Update architecture enum values.
4187 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4188 (sparc_opcode_lookup_arch): New function.
4189 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4190 (sparc_opcodes): Add v9a shutdown insn.
4192 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4194 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4195 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4197 (print_insn_sparc64): Deleted.
4198 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4201 * sparc-opc.c (architecture_pname): Add v9a.
4203 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4205 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4206 incorrectly defined as 0x16 when it should be 0x15.
4207 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4208 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4209 excb (exception barrier) which is defined in the Alpha
4210 Architecture Handbook version 2.
4211 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4212 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4213 disassembled as or, for example.
4215 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4217 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4218 (_print_insn_mips): Change i from int to unsigned int.
4220 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4222 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4223 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4225 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4227 * i386-dis.c: Added Pentium Pro instructions.
4229 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4231 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4234 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4236 * sh-opc.h (sh_nibble_type): Added REG_B.
4237 (sh_arg_type): Added A_REG_B.
4238 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4240 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4242 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4244 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4246 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * Makefile.in (distclean): Remove stamp-h. From Ronald
4249 F. Guilmette <rfg@monkeys.com>.
4251 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4253 From David Mosberger-Tang <davidm@azstarnet.com>:
4254 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4257 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4259 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4260 (sh_table): Added many SH3 opcodes.
4261 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4263 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4265 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4266 (subco,subco.): Mark this PPC, not PPCCOM.
4268 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4270 * configure: Rebuild with autoconf 2.7.
4272 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4274 * configure: Rebuild with autoconf 2.6.
4276 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4278 * configure.in: Sort list of architectures. Accept but do nothing
4279 for alliant, convex, pyramid, romp, and tahoe.
4281 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4283 * a29k-dis.c (print_special): Change num to unsigned int.
4285 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4287 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4290 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4292 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4293 * configure: Rebuilt.
4295 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4297 * configure.in: Add case for bfd_i860_arch.
4298 * configure: Rebuild.
4300 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4302 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4303 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4304 (NEXTDOUBLE): Likewise.
4305 (print_insn_m68k): Don't match fmoveml if there is more than one
4306 register in the list.
4307 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4309 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4311 * m68k-opc.c: Use #W rather than #w.
4312 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4314 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4316 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4317 and likewise for all the dbxx opcodes.
4319 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4321 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4323 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4325 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4326 the VR4100 specific instructions to the mips_opcodes structure.
4328 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4330 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4331 ugly Metrowerks bug in CW6, is fixed in CW7.
4333 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4335 * ppc-opc.c (whole file): Add flags for common/any support.
4337 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4339 * Makefile.in (BISON): Remove macro.
4340 (FLAGS_TO_PASS): Remove BISON.
4342 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4344 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4346 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4347 instructions that take no args by looking at the match mask.
4348 (print_insn_arg): Always print "%" before register names.
4349 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4350 [case '_']: Don't print "@#" before address.
4351 [case 'J']: Use "%s" as format string, not register name.
4352 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4354 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4356 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4359 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4361 From David Mosberger-Tang <davidm@azstarnet.com>
4363 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4364 (alpha_insn_set): added definitions for VAX floating point
4365 instructions (Unix compilers don't generate these, but handcoded
4366 assembly might still use them).
4368 * alpha-dis.c (print_insn_alpha): added support for disassembling
4369 the miscellaneous instructions in the Alpha instruction set.
4371 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4373 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4374 no longer create sysdep.h, sed ppc-opc.c to work around a
4375 serious Metrowerks C bug.
4376 * mpw-make.in: Remove.
4377 * mpw-make.sed: New file, used by mpw-configure to edit
4378 Makefile.in into an MPW makefile.
4380 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4382 * Makefile.in (maintainer-clean): New synonym for realclean.
4384 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4386 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4387 which use '0', '1', and '2' instead. Specify the proper size for
4388 a pmove immediate operand. Correct the pmovefd patterns to be
4389 moves to a register, not from a register.
4390 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4392 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4394 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4395 %psr, %wim, %tbr as F_NOTV9.
4397 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4399 * Makefile.in (Makefile): Just rebuild Makefile when running
4401 (config.h, stamp-h): New targets.
4402 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4403 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4404 rebuilding config.h.
4405 * configure: Rebuild.
4407 * mips-opc.c: Change unaligned loads and stores with "t,A"
4408 operands to use "t,A(b)".
4410 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4412 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4414 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4416 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4417 until 3 instead of until 2.
4419 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4421 * Makefile.in (ALL_CFLAGS): Define.
4422 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4423 (MOSTLYCLEAN): Add config.log.
4424 (distclean): Don't remove config.log.
4425 * configure.in: Substitute HDEFINES.
4426 * configure: Rebuild.
4428 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4430 * sh-opc.h (sh_arg_type): Add F_FR0.
4431 (sh_table, case fmac): Add F_FR0 as first argument.
4433 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4435 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4437 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4439 * sparc-dis.c: Remove all references to NO_V9.
4441 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4443 * aclocal.m4: Just include ../bfd/aclocal.m4.
4444 * configure: Rebuild.
4446 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4448 * sparc-dis.c (X_DISP19): Define.
4449 (print_insn, case 'G'): Use it.
4450 (print_insn, case 'L'): Sign extend displacement.
4452 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4454 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4455 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4456 host_makefile_frag or frags.
4457 * aclocal.m4: New file.
4458 * configure: Rebuild.
4459 * Makefile.in (INSTALL): Set to @INSTALL@.
4460 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4461 (INSTALL_DATA): Set to @INSTALL_DATA@.
4463 (AR_FLAGS): Set to rc rather than qc.
4464 (CC): Define as @CC@.
4465 (CFLAGS): Set to @CFLAGS@.
4466 (@host_makefile_frag@): Remove.
4467 (config.status): Remove dependency upon @frags@.
4469 * configure.in: ../bfd/config.bfd now just sets shell variables.
4470 Use them rather than looking through target Makefile fragments.
4471 * configure: Rebuild.
4473 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4475 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4477 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4479 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4480 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4483 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4484 (lookup_{name,value}): New functions.
4485 (prefetch_table): New static local.
4486 (sparc_{encode,decode}_prefetch): New functions.
4487 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4489 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4491 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4494 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4496 * sh-dis.c: Correct comment on first line of file.
4498 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4500 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4502 * sparc-opc.c (asi, membar): New static locals.
4503 (sparc_{encode,decode}_{asi,membar}): New functions.
4504 (sparc_opcodes, membar insn): Fix.
4505 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4506 Support decoding of membar masks.
4509 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4511 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4513 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4515 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4516 and likewise for the other branches. Add bhs as an alias for bcc,
4517 and likewise for the size variants. Add dbhs as an alias for
4520 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4522 * sh-opc.h (FP sts instructions): Update to match reality.
4524 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4526 * m68k-dis.c: (fpcr_names): Add % before all register names.
4527 (reg_names): Likewise.
4528 (print_insn_arg): Don't explicitly print % before register names.
4529 Add % before register names in static array names. In case 'r',
4530 print data registers as `@(Dn)', not `Dn@'. When printing a
4531 memory address, don't print @# before it.
4532 (print_indexed): Change base_disp and outer_disp from int to
4533 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4534 syntax. Sign extend 8 byte displacement correctly.
4535 (print_base): Print using MIT syntax. Print zpc when appropriate.
4536 Change parameter disp from int to bfd_vma.
4538 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4541 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4543 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4544 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4545 * sh-opc.h (sh_arg_type): Add new operand types.
4546 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4548 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4550 * Makefile.in (distclean): Remove generated file config.h.
4552 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4554 * Makefile.in (distclean): Remove generated file config.h.
4556 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4558 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4560 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4562 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4563 rather than numopcodes. Use m68k_opcodes rather than removed
4564 opcode function. Don't check F_ALIAS.
4565 (print_insn_arg): Change first parameter to be const char *.
4566 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4567 (m68k-opc.o): New target.
4568 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4569 * configure: Rebuild.
4571 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4573 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4574 (opcode_bits, opcode_hash_table): New variables.
4575 (opcodes_initialized): Renamed from opcodes_sorted.
4576 (build_hash_table): New function.
4577 (is_delayed_branch): Use hash table.
4578 (print_insn): Renamed from print_insn_sparc, made static.
4579 Build and use hash table. If !sparc64, ignore sparc64 insns,
4580 and vice-versa if sparc64.
4581 (print_insn_sparc, print_insn_sparc64): New functions.
4582 (compare_opcodes): Move sparc64 opcodes to end.
4583 Print commutative insns with constant second.
4584 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4586 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4588 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4589 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4590 avoids printing a delay slot in a delay slot.
4591 * sh-opc.h (sh_table): Fully bracket last entry.
4593 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4595 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4597 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4599 * configure.in: Get host_makefile_frag from ${srcdir}.
4601 * configure.in: Autoconfiscated. Check for string[s].h. Create
4602 config.h from config.in. Don't set up sysdep.h link.
4603 * sysdep.h: New file.
4604 * configure, config.in: New files, generated from configure.in.
4605 * Makefile.in: Updated to be processed autoconf-style.
4606 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4607 (Makefile): Depend on config.status.
4608 (config.status): New rule.
4609 * configure.bat: Update Makefile substitutions.
4611 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4613 * mips-opc.c (L1): Define.
4614 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4615 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4618 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4620 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4621 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4622 have multiple add units but only a single logical unit.
4624 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4625 shifted by 18, without any insertion or extraction function.
4626 (insert_cr, extract_cr): Remove.
4628 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4630 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4633 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4635 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4636 * sh-opc.h: Add copyright.
4638 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4640 * Makefile.in (crunch-m68k): Delete extra target accidentally
4641 checked in a while ago.
4643 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4645 * sh-opc.h (sh_table): Add SH3 support.
4647 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4649 * sh-opc.h: Added bsrf and braf.
4651 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4653 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4654 bogus [ls]fm{ea,fd} patterns.
4656 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4657 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4658 initialize it from memory. Make function static.
4659 (print_insn_{big,little}_arm): New functions.
4660 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4661 the correct endianness.
4663 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4665 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4668 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4670 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4671 17th, so that it builds again using GCC as the compiler.
4673 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4675 * mips-dis.c (print_insn_little_mips): Cast return value from
4676 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4677 expects an unsigned long, and that might be fewer words of
4678 argument storage (e.g., if bfd_vma is long long on a 32-bit
4680 (print_insn_big_mips): Likewise with bfd_getb32 value.
4681 (_print_insn_mips): Now static.
4683 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4685 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4686 gcc memory hog problem with initializer is fixed.
4688 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4690 Merge in support for Mac MPW as a host.
4691 (Old change descriptions retained for informational value.)
4693 * mpw-config.in (archname): Compute from the config.
4694 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4696 * mpw-config.in (target_arch): Compute from canonical target.
4697 (m68k, mips, powerpc, sparc): Add architectures.
4698 * mpw-make.in (disassemble.c.o): Add.
4699 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4701 * mpw-config.in (BFD_MACHINES): Set to a default value.
4702 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4704 * mpw-make.in (CSEARCH): Add extra-include to search path.
4706 * mpw-config.in (varargs.h): Don't create.
4707 (sysdep.h): Create using forward-include.
4708 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4710 * mpw-config.in: New file, MPW version of configure.in.
4711 * mpw-make.in: New file, MPW version of Makefile.in.
4713 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4715 * alpha-dis.c (print_insn_alpha): Put empty statement after
4718 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4720 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4721 (low_sign_extend): Likewise.
4722 (get_field): Delete unused function.
4723 (set_field, deposit_14, deposit_21): Likewise.
4725 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4727 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4730 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4732 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4734 * alpha-opc.h (OSF_ASMCODE): define
4735 print pal-code names as defined in App C of the
4736 Alpha Architecture Reference Manual
4738 * alpha-dis.c: cleaned up output
4739 print stylized code forms as defined in App A.4.3 of the
4740 Alpha Architecture Reference Manual
4742 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4744 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4746 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4749 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4751 * m68k-dis.c (opcode): New function. Returns address of opcode
4752 table entry given index, even if the opcode table was split to
4753 work around gcc bugs.
4754 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4756 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4757 (reg_names): Now const.
4758 (print_insn_arg): Arrays cacheFieldName and names now const.
4759 (print_indexed): Array scales now const.
4761 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4763 * ppc-opc.c: Sort recently added instructions by minor opcode
4764 number within major opcode number.
4766 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4768 * hppa-dis.c: Include libhppa.h.
4770 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4772 * mips-opc.c: Change dli to use M_DLI, and add dla.
4774 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4776 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4778 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4780 * mips-opc.c: Add r4650 mul instruction.
4782 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4784 * mips-opc.c: Add uld and usd macros for unaligned double load and
4787 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4789 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4790 mfdcr, mtdcr, icbt, iccci.
4792 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4794 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4795 signed char fields to shorts, more portable.
4797 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4799 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4800 char fields as signed chars, since they may have negative values.
4802 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4804 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4805 (mycroft@netbsd.org).
4807 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4809 From "Logg, Ed" <elogg@ea.com>:
4810 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4811 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4814 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4816 * ppc-opc.c: Changes based on patch from David Edelsohn
4817 <edelsohn@mhpcc.edu>.
4818 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4821 (insert_tbr): New static function.
4822 (extract_tbr): New static function.
4823 (XFXFXM_MASK, XFXM): Define.
4824 (XSPRBAT_MASK, XSPRG_MASK): Define.
4825 (powerpc_opcodes): Add instructions to access special registers by
4826 name. Add mtcr and mftbu.
4828 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4830 * mips-opc.c (P3): Define.
4831 (mips_opcodes): Add mad and madu.
4833 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4835 * configure.in: Add W65 support.
4836 * disassemble.c: Likewise.
4837 * w65-opc.h, w65-dis.c: New files.
4839 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4841 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4844 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4846 * mips-opc.c: Add dli as a synonym for li.
4848 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4850 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4851 print something for reserved opcode values, even if it won't
4854 * mips-dis.c (_print_insn_mips): When initializing, shift right
4855 and mask, to avoid sign extension problems on the Alpha.
4857 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4860 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4862 * sh-opc.h (mov.l gbr): Get direction right.
4863 * sh-dis.c (print_insn_shx): New function.
4864 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4865 print opcodes with right byte order.
4867 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4869 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4870 to avoid conflicts with getopt.
4872 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4874 * hppa-dis.c (print_insn_hppa): Read the instruction using
4875 bfd_getb32, so that it works on a little endian or 64 bit host.
4876 Remove unused local variable op.
4878 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4880 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4881 addu does not work correctly if -mips3.
4883 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4885 * a29k-dis.c (print_special): Add special register names defined
4886 on 29030, 29040 and 29050.
4887 (print_insn): Handle new operand type 'I'.
4889 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4891 * Makefile.in (INSTALL): Use top level install.sh script.
4893 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4895 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4896 that it works on a little endian host.
4898 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4900 * configure.in: Use ${config_shell} when running config.bfd.
4902 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4904 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4906 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4908 * a29k-dis.c (print_insn): Print the opcode.
4910 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4912 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4914 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4916 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4918 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4920 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4921 which store a value into memory.
4923 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4925 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4926 * arm-dis.c, arm-opc.h: New files.
4928 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4930 * Makefile.in (ns32k-dis.o): Add dependency.
4931 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4932 string, not as array of chars.
4934 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4936 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4938 * sparc-opc.c: Added sparclite extended FP operations, and
4939 versions of v9 impdep* instructions permitting specification of
4942 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4944 * i960-dis.c (reg_names): Now const.
4945 (struct sparse_tabent): New type, copied from array type in mem
4947 (ctrl): Local static array ctrl_tab now const.
4948 (cobr): Local static array cobr_tab now const.
4949 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4950 static variable mem_tab no longer explicitly initialized. Changed
4951 mem_init to const array of struct sparse_tabent.
4952 (reg): Local static variable reg_tab no longer explicitly
4953 initialized. Changed reg_init to const array of struct
4955 (ea): Local static array scale_tab now const.
4957 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4960 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4962 * configure.bat: the disassember needs to be enabled for
4963 "objdump -d" to work in djgpp.
4965 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4967 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4968 (invalid_float): Enabled general version, doesn't require running
4969 on ns32k host. Changed to take char* argument, and test for
4970 explicitly specified sizes, instead of using sizeof() on host CPU
4972 (INVALID_FLOAT): Cast first argument.
4973 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4974 list_P032, list_M032): Now const.
4975 (optlist, list_search): Made appropriate arguments now point to
4977 (print_insn_arg): Changed static array of one-character-string
4978 pointers into a static const array of characters; fixed sprintf
4979 statement accordingly.
4981 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4983 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4984 from distribution. A ns32k-dis.c from a previous distribution has
4985 been brought up to date and supports the new interface.
4987 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4989 * configure.in: add bfd_ns32k_arch target support.
4991 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4992 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4994 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4996 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4999 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5001 * h8300-dis.c, mips-dis.c: Don't use true and false.
5003 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5005 * configure.in: Change --with-targets to --enable-targets.
5007 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5009 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5010 opcodes to the first instruction with that opcode, to speed
5011 disassembly of large files. From ralphc@pyramid.com (Ralph
5014 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5016 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5018 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5020 * configure.bat: update to latest makefile.in
5022 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5024 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5025 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5026 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5027 slot insn is in a delay slot.
5028 * z8k-opc.h: (resflg): Fix patterns.
5029 * h8500-opc.h Fix CR insn patterns.
5031 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5033 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5034 "cmpl" before POWER versions, so that gas -many uses them.
5036 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5038 * disassemble.c: New file.
5039 * Makefile.in (OFILES): Add disassemble.o.
5040 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5041 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5042 binutils/configure.in.
5044 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5045 opcode being examined.
5047 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5049 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5050 (insert_ral, insert_ram, insert_ras): New functions.
5051 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5052 RAS for store with update.
5054 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5057 (edelsohn@npac.syr.edu).
5059 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5061 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5064 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5066 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5068 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * ppc-opc.c (powerpc_operands): The signedp field has been
5071 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5072 instead. Add new operand SISIGNOPT.
5073 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5074 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5075 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5078 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5080 * i386-dis.c (struct private): Renamed to dis_private. `private'
5081 is a reserved word for dynix cc.
5083 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5085 * configure.in: Change error message to refer to bfd/config.bfd
5086 rather than bfd/configure.in.
5088 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5090 * ppc-opc.c: Define POWER2 as short alias flag.
5091 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5094 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5096 * i960-dis.c (print_insn_i960): Don't read a second word for
5097 opcodes 0, 1, 2 and 3.
5099 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5101 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5103 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * m68881-ext.c: Removed; no longer used.
5106 * Makefile.in: Changed accordingly.
5108 * m68k-dis.c (ext_format_68881): Don't declare.
5109 (print_insn_m68k): If an instruction uses place 'i', it uses at
5110 least four fixed bytes.
5111 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5112 extended float, convert to double using floatformat_to_double, not
5113 ieee_extended_to_double, and fetch the data before converting it.
5115 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5117 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5118 davidj@ICSI.Berkeley.EDU (David Johnson).
5120 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5122 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5123 PowerPC uses bdnz[l][a].
5125 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5127 * dis-buf.c, i386-dis.c: Include sysdep.h.
5129 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5133 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5134 by Motorola PowerPC 601 with PPC_OPCODE_601.
5135 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5136 Disassemble Motorola PowerPC 601 instructions as well as normal
5137 PowerPC instructions.
5139 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5141 * i960-dis.c (reg, mem): Just use a static array instead of
5144 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5146 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5147 condition name index if this is for a negated condition.
5149 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5150 Floating point format for 'H' operand is backwards from normal
5151 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5152 operands (fmpyadd and fmpysub), handle bizarre register
5153 translation correctly for single precision format.
5155 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5156 or 'I' operands if the next format specifier is 'M' (fcmp
5157 condition completer).
5159 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5161 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5162 single number giving a bitmask for the MB and ME fields of an M
5163 form instruction. Change NB to accept 32, and turn it into 0;
5164 also turn 0 into 32 when disassembling. Seperated SH from NB.
5165 (insert_mbe, extract_mbe): New functions.
5166 (insert_nb, extract_nb): New functions.
5167 (SC_MASK): Mask out SA and LK bits.
5168 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5169 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5170 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5171 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5172 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5173 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5174 (powerpc_macros): Define table of macro definitions.
5175 (powerpc_num_macros): Define.
5177 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5178 if PPC_OPERAND_NEXT is set.
5180 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5182 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5183 char. Retrieve contents using bfd_getl32 instead of shifting.
5185 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5187 * ppc-opc.c: New file. Opcode table for PowerPC, including
5188 opcodes for POWER (RS/6000).
5189 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5190 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5191 (CFILES): Add ppc-dis.c.
5192 (ppc-dis.o, ppc-opc.o): New targets.
5193 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5195 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5197 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5198 No space before 'u', 'f', or 'N'.
5200 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5202 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5203 farther than we should.
5205 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5207 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5209 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5211 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5213 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5214 needs it, to prevent reading past the end of a section.
5216 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5218 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5219 Removed t,A case for la; always use t,A(b) case.
5221 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5223 From Ted Lemen <mellon@pepper.ncd.com>
5224 * mips-dis.c (print_insn_arg): Handle 'k'.
5225 * mips-opc.c: Make cache use k, not t.
5227 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5229 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5230 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5231 FLOAT_FORMAT_CODE to put out floating point register names.
5233 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5235 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5237 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5239 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5241 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5243 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5244 larger than 32. Moved dsxx32 variants first for disassembler.
5246 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5248 * z8kgen.c, z8k-opc.h: Add full lda information.
5250 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5252 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5253 movb instructions. Any necessary space will be emitted by
5254 the code to handle nullification completers.
5256 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5258 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5260 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5262 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5263 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5265 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5267 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5269 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5271 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5272 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5274 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5276 * m88k-dis.c (m88kdis): comment change. Remove space after
5278 (printop): handle new arg types DEC and XREG for m88110.
5280 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5282 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5283 type for absolute branch addresses. Delete special
5284 "ble" and "be" code in 'W' operand code.
5286 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5288 * mips-opc.c: Set hazard information correctly for branch
5289 likely instructions.
5291 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5293 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5294 info->fprintf_func for printing and info->print_address_func for
5297 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5299 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5301 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5303 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5304 Corrected second case of "b" for disassembler.
5306 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5308 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5309 to BFD swapping routines to correspond to BFD name changes.
5311 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5313 * mips-opc.c: Change div machine instruction to be z,s,t rather
5314 than s,t. Change div macro to be d,v,t rather than d,s,t.
5315 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5316 rem and remu which generates only the corresponding div
5317 instruction. This is for compatibility with the MIPS assembler,
5318 which only generates the simple machine instruction when an
5319 explicit destination of $0 is used.
5320 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5322 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5324 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5325 WR_31 hazard for bal, bgezal, bltzal.
5327 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5329 * hppa-dis.c (print_insn_hppa): Use print function
5330 from within the disassemble_info, not fprintf_filtered.
5332 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5334 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5335 Law, law@cs.utah.edu.)
5337 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5339 * mips-opc.c ("absu"): Removed.
5342 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5344 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5345 Changed hazard information to distinguish between memory load
5346 delays and coprocessor load delays.
5348 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5350 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5352 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5354 * configure.in: Don't pass cpu to config.bfd.
5356 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5358 * m88k-dis.c (m88kdis): Make class unsigned.
5360 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5362 * alpha-dis.c (print_insn_alpha): One branch format case was
5363 missing the instruction name.
5365 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5367 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5368 Add the arch-specific auxiliary files.
5369 (OFILES): Remove the arch-specific auxiliary files
5370 and use BFD_MACHINES instead of DIS_LIBS.
5371 * configure.in: Set BFD_MACHINES based on --with-targets option.
5373 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5375 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5378 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5380 * sparc-opc.c: Change CONST to const to deal with gcc
5381 -Dconst=__const -traditional.
5383 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5385 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5386 coprocessor instructions out of #if 0, and made them use new
5389 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5391 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5393 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5395 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5396 instruction, for use by the disassembler.
5398 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5399 hand-coded sign extensions that depended on 32-bit host ints.
5400 FIXME, we still depend on big-endian host bitfield ordering.
5401 (sparc_print_insn): Set the insn_info_valid field, and the
5402 other fields that describe the instruction being printed.
5404 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5406 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5407 `jmp' instead of just one of them.
5409 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5411 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5412 (fput_fp_reg_r): Renamed from fput_reg_r.
5413 (fput_fp_reg): New function.
5414 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5416 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5418 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5420 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5422 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5424 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5425 don't output a space.
5427 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5429 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5431 * mips-opc.c: New file, containing opcode table from
5432 ../include/opcode/mips.h.
5433 * Makefile.in: Add it.
5435 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5437 * m88k-dis.c: New file, moved in from gdb and changed to use the
5438 new dis-asm.h disassembler interface.
5439 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5440 (m88k-dis.o): New target.
5442 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5444 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5445 argument string const char * to correspond to opcode/mips.h.
5447 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5449 * mips-dis.c: Updated to account for name changes in new version
5451 * Makefile.in: Added header file dependencies.
5453 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5455 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5457 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5459 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5460 extend, rather than shifts.
5462 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5464 * Makefile.in: Undo 15 June change.
5466 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5468 * m68k-dis.c (print_insn_arg): Change return value to byte count
5470 * m68k-dis.c: Re-write to detect invalid operands before
5471 printing anything, so we can handle this the same way we
5472 handle invalid opcodes.
5474 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5476 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5478 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5480 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5483 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5485 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5487 * configure.in: Do make sysdep.h link.
5488 * Makefile.in: Search ../include. Don't search ../bfd.
5490 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5492 Changes from Jeff Law, law@cs.utah.edu:
5493 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5494 Do not print a space before the completers specified by
5497 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5499 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5500 defined, since gdb has been fixed.
5502 Changes from Jeff Law, law@cs.utah.edu:
5503 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5504 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5505 be a *disassemble_info, not a *FILE.
5506 * hppa-dis.c: Support 'd', '!', and 'a'.
5507 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5508 * hppa-dis.c: Delete cases which are no longer needed.
5510 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5512 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5514 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5516 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5519 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5521 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5522 * configure.in: No longer need to configure to get sysdep.h.
5524 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5526 * Patches from Jeffrey Law <law@cs.utah.edu>.
5527 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5528 templates for 1.1 FP computational instructions.
5530 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5532 * h8500-dis.c (print_insn_h8500): Address argument is type
5534 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5537 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5538 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5540 * sparc-dis.c (compare_opcodes): Move static declaration to
5543 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5545 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5546 instruction, remove unimp hack from 'l' argument.
5548 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5550 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5553 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5555 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5556 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5559 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5561 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5562 arrays of string pointers to 2-d arrays of chars, to save
5565 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5567 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5568 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5570 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5572 * hppa-dis.c: New file from Utah, adapted to new disassembler
5574 * Makefile.in: Include it.
5576 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5578 * sh-dis.c, sh-opc.h: New files.
5580 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5582 * alpha-dis.c, alpha-opc.h: New files.
5584 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5586 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5589 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5591 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5593 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5595 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5598 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5600 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5601 and double percent signs a few places.
5603 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5605 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5606 Use info->print_address_func not print_address.
5608 * dis-buf.c (generic_print_address): New function.
5610 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5612 * Makefile.in: Add sparc-dis.c.
5613 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5615 Add `add' instruction to the set that get checked
5616 for a preceding `sethi' in order to print an absolute address.
5617 * (print_insn): Disassembly prefers real instructions.
5618 (is_delayed_branch): Speed up.
5619 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5620 Still missing some float ops, and needs testing.
5621 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5622 F_ALIAS. Use printf, not fprintf, when not passing a file
5624 (compare_opcodes): Check that identical instructions have
5625 identical opcodes, complain otherwise.
5628 * Include reg_names.
5630 Use dis-asm.h/read_memory_func interface.
5632 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5634 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5635 deliberately return non-zero to setjmp from longjmp. Otherwise
5636 this code fails to compile.
5638 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5640 * m68k-dis.c: Fix prototype for fetch_arg().
5642 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5644 * dis-buf.c: New file, for new read_memory_func interface.
5645 Makefile.in (OFILES): Include it.
5646 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5647 Use new read_memory_func interface.
5649 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5651 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5652 * h8500-opc.h: Fix couple of opcodes.
5654 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5656 * Makefile.in: add dvi & installcheck targets
5658 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5660 * Makefile.in: Update for h8500-dis.c.
5662 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5664 * h8500-dis.c, h8500-opc.h: New files
5666 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5668 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5669 ../include/dis-asm.h.
5670 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5671 and ../gdb/m68k-pinsn.c).
5672 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5673 and ../gdb/i386-pinsn.c).
5674 * m68881-ext.c: New file. Moved definition of
5675 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5676 * Makefile.in: Adjust for new files.
5677 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5678 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5679 can be dis-assembled.
5681 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5683 * mips-dis.c (print_insn_arg): Now returns void.
5685 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5687 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5688 files that use the macros.
5690 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5692 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5693 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5694 (CFILES): Added mips-dis.c.
5696 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5698 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5699 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5701 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5703 * Makefile.in: Improve *clean rules.
5704 * configure.in: Allow a default host.
5706 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5708 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5709 files include other sysdep files
5711 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5713 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5715 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5717 * configure.in: For host support, use ../bfd/configure.host
5718 so it stays in sync with the ../bfd/hosts database.
5720 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5722 * configure.in: use cpu-vendor-os triple instead of nested cases
5724 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5726 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5727 *always* the wrong one.
5729 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5731 * z8kgen.c: added copyright info
5733 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5735 * z8k-dis.c (unparse_instr): prettier tabs
5736 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5738 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5740 * configure.in: Add ncr* configuration.
5741 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5742 picayune ANSI compilers happy.
5744 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5746 * configure.in (i386): Make i386 and i486 synonymous for now.
5747 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5749 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5751 * Makefile.in (install): Fix typo.
5753 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5755 * Makefile.in (make): Remove obsolete crud.
5756 (sparc-opc.o): Avoid Sun Make VPATH bug.
5758 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5760 * Makefile.in: since there are no SUBDIRS, remove rule and
5761 references of subdir_do.
5763 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5765 * Makefile.in (install): Get the library name right here too.
5766 Don't install bfd.h, since it's unrelated to this library. No
5767 subdirs to recurse into, either.
5768 (CFILES): The source file has a .c suffix, not .o.
5770 * sparc-opc.c: New file, moved from BFD.
5771 * Makefile.in (OFILES): Build it.
5773 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5775 * z8k-dis.c: fixed forward refferences of some declarations.
5777 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5779 * Makefile.in: get the name of the library right
5781 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5783 * z8k-dis.c: knows how to disassemble z8k stuff
5784 * z8k-opc.h: new file full of z8000 opcodes
5788 version-control: never