1 1999-04-26 Tom Tromey <tromey@cygnus.com>
3 * aclocal.m4, configure: Updated for new version of libtool.
5 1999-04-14 Doug Evans <devans@casey.cygnus.com>
7 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
8 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
10 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
12 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
15 1999-04-10 Doug Evans <devans@casey.cygnus.com>
17 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
18 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
20 1999-04-06 Ian Lance Taylor <ian@zembu.com>
22 * opintl.h (LC_MESSAGES): Never define.
24 1999-04-04 Ian Lance Taylor <ian@zembu.com>
26 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
27 (separator_char, scale_char): Likewise.
28 (print_insn_x86): Likewise.
29 (print_insn_i386): Likewise. Add declaration.
31 1999-03-26 Doug Evans <devans@casey.cygnus.com>
33 * fr30-dis.c: Rebuild.
34 * m32r-dis.c: Rebuild.
36 1999-03-23 Ian Lance Taylor <ian@zembu.com>
38 * m68k-opc.c: Change compare instructions to use "@s" rather than
39 ";s" when used with an immediate operand.
41 1999-03-22 Doug Evans <devans@casey.cygnus.com>
43 * cgen-opc.c (cgen_set_cpu): Delete.
44 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
45 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
47 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
49 * po/opcodes.pot: Rebuild.
51 1999-03-16 Martin Hunt <hunt@cygnus.com>
53 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
55 1999-03-11 Doug Evans <devans@casey.cygnus.com>
57 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
58 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
59 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
60 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
61 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
62 * m32r-opinst.c: Rebuild.
64 1999-02-25 Doug Evans <devans@casey.cygnus.com>
66 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
67 (cgen_hw_lookup_by_num): Rewrite.
68 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
69 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
70 * m32r-opinst.c: Rebuild.
72 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
74 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
75 (insert_jhint): Fix insertion mask.
76 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
78 1999-02-10 Doug Evans <devans@casey.cygnus.com>
80 * Makefile.in: Rebuild.
82 1999-02-09 Doug Evans <devans@casey.cygnus.com>
84 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
85 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
86 * Makefile.am: Remove references to them.
87 (HFILES): Add fr30-desc.h,m32r-desc.h.
88 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
90 (ALL_MACHINES): Update.
91 * configure.in: Redo handling of cgen_files.
92 (bfd_i960_arch): Delete i960c-*.lo files.
93 * configure: Regenerate.
94 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
95 (hash_insn_array): Rewrite.
96 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
97 (hash_insn_array): Rewrite.
98 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
99 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
100 (cgen_lookup_get_insn_operands): Ditto.
101 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
102 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
103 * po/POTFILES.in: Rebuild.
104 * po/opcodes.pot: Rebuild.
106 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
108 * Makefile.am: Rebuild dependencies.
109 (HFILES): Add fr30-opc.h.
110 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
111 * Makefile.in: Rebuild.
113 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
114 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
116 * acconfig.h: Remove.
117 * configure: Rebuild with current autoconf/automake.
118 * aclocal.m4: Likewise.
119 * config.in: Likewise.
120 * Makefile.in: Likewise.
122 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
124 * m68k-opc.c: Correct move (not movew) to status word on 5200.
126 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
128 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
129 * i386-dis.c (x_mode): Define.
133 (dis386_twobyte): Remove.
134 (dis386_twobyte_att): New.
135 (dis386_twobyte_intel): New.
136 (print_insn_x86): Use new arrays.
138 (float_mem_intel): New.
139 (float_mem_att): New.
140 (dofloat): Use new float_mem arrays.
141 (print_insn_i386_att): New.
142 (print_insn_i386_intel): New.
143 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
144 (putop): Handle intel syntax.
145 (OP_indirE): Handle intel syntax.
146 (OP_E): Handle intel syntax.
147 (OP_I): Handle intel syntax.
148 (OP_sI): Handle intel syntax.
149 (OP_OFF): Handle intel syntax.
153 1999-01-27 Doug Evans <devans@casey.cygnus.com>
155 * fr30-opc.h,fr30-opc.c: Rebuild.
156 * i960c-opc.h,i960c-opc.c: Rebuild.
157 * m32r-opc.c: Rebuild.
159 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
161 * hppa-dis.c: revert HP merge changes until HP gives us
164 1999-01-19 Nick Clifton <nickc@cygnus.com>
166 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
167 offsets as well as symbloic address.
169 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
171 * hppa-dis.c: fix comments and some indentation.
173 1999-01-12 Doug Evans <devans@casey.cygnus.com>
175 * fr30-opc.c,i960c-opc.c: Regenerate.
177 1999-01-11 Doug Evans <devans@casey.cygnus.com>
179 * fr30-opc.c: Regenerate.
181 1999-01-06 Doug Evans <devans@casey.cygnus.com>
183 * m32r-dis.c: Regenerate.
185 1999-01-05 Doug Evans <devans@casey.cygnus.com>
187 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
188 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
189 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
191 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
193 * configure.in: Require autoconf 2.12.1 or higher.
195 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
197 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
199 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
201 * fr30-opc.c: Regenerated.
203 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
205 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
207 1998-12-15 Dave Brolley <brolley@cygnus.com>
209 * fr30-opc.c,fr30-opc.h: Regenerated.
211 1998-12-14 Dave Brolley <brolley@cygnus.com>
213 * fr30-opc.c,fr30-opc.h: Regenerated.
215 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
217 * fr30-opc.c,fr30-opc.h: Regenerated.
219 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
221 * m32r-opc.c: Regenerate.
223 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
225 * dis-buf.c (generic_strcat_address): reformat to GNU coding
226 conventions. change sprintf call to an sprintf_vma call.
228 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
230 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
232 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
234 The following changes were made by
235 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
236 David Taylor <taylor@texas.cygnus.com>, and
237 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
238 merge in changes by HP; HP did not create ChangeLog entries.
240 * dis-buf.c (generic_strcat_address): new function.
242 * hppa-dis.c: Changes to improve hppa disassembly.
243 Changed formatting in : reg_names, fp_reg_names,control_reg,
244 New variables : sign_extension_names, deposit_names, conversion_names
245 float_test_names, compare_cond_names_double, add_cond_names_double,
246 logical_cond_names_double, unit_cond_names_double,
247 branch_push_pop_names, saturation_names, shift_names, mix_names,
248 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
249 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
250 (fput_const): renamed as fput_hex_const
252 - use the macros fputs_filtered and
253 fput_decimal_const whenever possible; calls to sign_extend require
254 2 params -- add a missing second param of 0.
255 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
256 architecture version number of current machine. HP folks are
257 trying to handle situation where the target program was compiled
258 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
260 - added new cases : 'g', 'B', 'm'
261 - added cases specifically for PA 2.0
262 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
263 - calls to fput_const become calls to fput_hex_const
265 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
267 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
268 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
269 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
270 * Makefile.in: Rebuilt.
271 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
273 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
274 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
276 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
278 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
280 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
282 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
284 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
285 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
287 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
289 * fr30-opc.c: Regenerate.
291 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
293 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
295 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
297 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
299 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
301 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
303 1998-11-30 Doug Evans <devans@casey.cygnus.com>
305 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
306 CGEN_INSN_BASE_VALUE.
307 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
308 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
310 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
312 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
314 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
316 * fr30-asm.c,fr30-dis.c: Regenerated.
318 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
320 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
322 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
324 * fr30-opc.c: Regenerated.
326 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
328 * fr30-opc.c: Regenerated.
329 * fr30-opc.h: Regenerated.
330 * fr30-dis.c: Regenerated.
331 * fr30-asm.c: Regenerated.
333 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
335 * mips-opc.c (sync.p,sync.l): Swap insn values.
337 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
339 * fr30-opc.c: Regenerate.
341 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
343 * fr30-opc.c: Regenerated.
344 * fr30-opc.h: Regenerated.
346 1998-11-18 Doug Evans <devans@casey.cygnus.com>
348 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
349 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
351 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
353 * fr30-opc.c: Regenerated.
355 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
357 * fr30-opc.c: Regenerated.
358 * fr30-opc.h: Regenerated.
359 * fr30-dis.c: Regenerated.
360 * fr30-asm.c: Regenerated.
362 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
364 * po/opcodes.pot: Regenerated.
365 * fr30-opc.c: Regenerated.
366 * fr30-opc.h: Regenerated.
367 * fr30-dis.c: Regenerated.
368 * fr30-asm.c: Regenerated.
370 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
372 * disassemble.c (disassembler): Add support for FR30 target.
374 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
376 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
377 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
379 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
381 * po/opcodes.pot: Regenerate.
382 * po/POTFILES.in: Regenerate.
383 * fr30-opc.c: Regenerate.
384 * fr30-opc.h: Regenerate.
386 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
388 * m32r-asm.c: Regenerate.
390 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
392 * configure.in: Added case for bfd_fr30_arch.
393 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
394 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
395 (CLEANFILES): Added stamp-fr30.
397 * fr30-asm.c: New file.
398 * fr30-dis.c: New file.
399 * fr30-opc.c: New file.
400 * fr30-opc.h: New file.
401 * po/POTFILES.in: Regenerated
402 * po/opcodes.pot: Regenerated
404 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
406 * configure.in: detect cygwin* instead of cygwin32*
407 * configure: regenerate
409 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
411 * mips-opc.c (IS_M): Added.
413 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
415 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
417 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
419 * m32r-opc.h,m32r-opc.c: Regenerate.
421 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
423 * i386-dis.c (OP_3DNowSuffix): New static function.
426 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
427 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
428 (insn_codep): New static variable.
429 (print_insn_x86): Init insn_codep after prefixes.
430 (grps): Add GRP14 entries for prefetch, prefetchw.
433 From Jeff B Epler <jepler@usgs.gov>
434 * i386-dis.c (Suffix3DNow): New table.
436 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
438 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
440 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
442 * d10v-dis.c (print_operand): If num is nonzero, then
443 add OPERAND_ACC1, not OPERAND_ACC0.
445 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
447 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
450 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
452 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
455 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
457 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
459 1998-09-09 Michael Meissner <meissner@cygnus.com>
461 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
464 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
466 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
468 (print_insn_little_arm): Detect Thumb symbols in elf object
471 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
473 * alpha-dis.c (print_insn_alpha): Use the machine type to
474 decide which PALcode set to include.
476 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
478 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
480 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
482 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
483 MSUB and MSUBS instructions.
485 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
487 * ppc-opc.c (powerpc_operands): Omit parens around additions in
490 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
492 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
493 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
494 +, -, and d for ColdFire.
496 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
497 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
498 (extract_mbe): Likewise.
500 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
502 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
504 * m10300-opc.c: First cut at UDF instructions.
506 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
508 * m32r-opc.c: Regenerate (remove semantic descriptions).
510 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
512 * arm-dis.c (print_insn_big_arm): Fix indentation.
513 (print_insn_little_arm): Likewise.
515 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
517 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
519 (print_insn_little_arm): Likewise.
521 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
523 Move all global state data into opcode table struct, and treat
524 opcode table as something that is "opened/closed".
525 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
526 (cgen_asm_init): Delete.
527 (cgen_set_parse_operand_fn): New function.
528 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
529 (cgen_dis_init): Delete.
530 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
531 (cgen_current_{opcode_table_mach,endian}): Delete.
532 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
534 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
536 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
539 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
541 * m10300-opc.c: Add entries for "no_match_operands" field in
544 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
546 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
548 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
550 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
552 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
554 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
556 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
558 (OP_J): Remove unnecessary subtraction when 16-bit displacement
559 will be masked later.
561 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
563 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
565 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
567 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
569 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
571 * m10300-dis.c: Only recognize instructions from the currently
573 * m10300-opc.c: Add field indicating the particular variant of
574 the mn10300 each instruction is available on.
576 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
578 * configure.in: For bfd_vax_arch, build vax-dis.lo.
579 * Makefile.am: Rebuild dependencies.
580 (CFILES): Add vax-dis.c.
581 (ALL_MACHINES): Add vax-dis.lo.
582 * aclocal.m4: Rebuild with current libtool.
583 * configure, Makefile.in: Rebuild.
585 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
587 * vax-dis.c: New file, from work by Pauline Middelink
588 <middelin@polyware.iaf.nl>.
589 * disassemble.c (ARCH_vax): Define if ARCH_all.
590 (disassembler): Add case for ARCH_vax.
591 * makefile.vms: Support compilation on vms/vax.
593 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
595 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
596 related to sign extension and the size of ints.
598 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
600 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
601 instructions. Support (sp) addressing mode by expanding it into
604 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
606 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
608 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
610 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
612 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
614 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
617 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
619 * mips-dis.c (print_insn_little_mips): Previously, instruction
620 printing references the symbol table to determine whether the
621 instruction resides in a block regular instructions or mips16
622 instructions. However, when the disassembler gets used in other
623 environments where the symbol table is not present, we no longer
624 rely in the symbol table, rather, use the low bit of the
625 instructions address to guess. There should be no change for usage
626 of the disassembler in host based programs, gdb, objdump.
627 (print_insn_big_mips): ditto.
628 (print_insn_mips): ditto
630 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
632 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
634 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
636 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
638 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
640 * i386-dis.c (index16): Add '%' to register names. Use ','
643 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
645 * i386-dis.c: Don't print opcode suffix when we can figure out the
646 size (and gas can!) by register operands, or from the default
648 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
650 (dis386, dis386_twobyte, grps): Use new suffix macros.
651 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
652 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
653 order of cmps operands to agree with Intel docs. Correct operand
654 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
655 agree with Intel docs.
656 (print_insn_x86): Print orphan fwait before other prefixes.
657 Return correct byte count for orphan fwait with prefixes. Don't
658 print `bound' operands in reverse order.
659 (ckprefix): Stop accumulating prefixes if we get fwait.
660 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
662 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
664 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
665 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
667 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
669 Fix problems when bfd_vma is wider than long.
670 * i386-dis.c: Make op_address and start_pc unsigned.
671 (set_op): Make parameter unsigned.
672 (print_insn_x86): Cast to bfd_vma when passing a value to
674 * ns32k-dis.c (CORE_ADDR): Don't define.
675 (print_insn_ns32k): Change type of addr to bfd_vma. Use
676 bfd_scan_vma to read back address.
677 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
679 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
680 (NEXTULONG): New definition.
681 (print_insn_m68k): Avoid overflow when computing third argument of
683 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
684 Use disp instead of val to store offset values.
685 (print_indexed): Use base_disp instead of word to store base
686 displacement, to avoid overflow.
687 * m10300-dis.c (disassemble): Cast value to long when computing
688 pc-relative address, to get correct sign extension.
690 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
692 * m32r-opc.c: Regenerate.
694 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
696 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
697 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
699 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
701 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
703 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
705 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
707 (OP_DSreg): Rename from OP_DSSI.
708 (OP_ESreg): Rename from OP_ESDI.
709 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
711 (append_seg): Rename from append_prefix.
712 (ptr_reg): New function.
713 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
715 (PREFIX_ADDR): Rename from PREFIX_ADR.
716 (float_reg): Add non-broken opcodes for people who don't want
719 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
721 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
724 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
726 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
728 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
730 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
731 0; produce error message for shifts of size 32 (or 64 for 64-bit
732 shifts), because the hardware doesn't support them.
734 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
736 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
737 LONG_2, LONG_2b formats to use this new operand.
739 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
741 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
743 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
745 * sparc-dis.c (print_insn_sparc): big endian instruction / little
748 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
750 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
751 and SHORT_B3b formats to use Rb instead of Ra.
753 Add FLAG_MUL16 to MUL2XH opcode.
755 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
756 to existing 1.1.1 parallelisation prohibition procedure.
758 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
760 * m32r-asm.c,m32r-dis.c: Regenerate.
762 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
764 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
765 with a shift count of 0.
767 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
769 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
770 (cgen_hw_lookup_by_num): New function.
772 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
774 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
776 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
778 * sparc-dis.c (print_insn_sparc): Always fetch instructions
779 as big-endian on SPARClite.
781 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
783 * d30v-opc.c (pre_defined_register): Remove alias for r0.
785 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
787 * po/Make-in (install-info): New target.
789 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
791 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
792 * configure: Rebuild.
794 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
796 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
797 variety of ISA2 instructions to set bottom ten bits of trap code.
799 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
801 * Makefile.am (config.status): Add explicit target so that
802 config.status depends upon bfd/configure.in.
803 * Makefile.in: Rebuild.
805 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
807 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
808 instructions to set bottom ten bits of break code.
809 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
810 for above optional argument.
812 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
814 * makefile.vms: Run dec c with /nodebug.
816 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
818 * Makefile.in: Rebuilt.
819 * Makefile.am: Regenerated dependencies with mkdep.
821 * opintl.h (_): Define as dgettext.
823 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
825 * cgen-asm.c: Internationalised.
826 * m32r-asm.c: Internationalised.
827 * m32r-dis.c: Internationalised.
828 * m32r-opc.c: Internationalised.
830 * aclocal.m4: Regenerated.
831 * configure: Regenerated.
832 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
833 * Makefile.in: Rebuild.
834 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
835 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
837 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
839 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
841 * aclocal.m4, configure: Rebuild with current tools.
843 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
845 * opintl.h: New file - contains internationalisation macros used
846 by source files in this directory.
847 * po/: New subdirectory - contains internationalisation files.
848 * po/Make-in: New file - Makefile constructor.
849 * po/POTFILES.in: New file - list of files in opcodes directory
850 that should be scan for internationalisation macros.
851 * po/opcodes.pot: New file - list of internationisation strings
852 found in files mentioned in po/POTFILES.in.
853 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
854 entry. Add intl directory to include paths.
855 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
856 HAVE_STRCPY, HAVE_LC_MESSAGES
857 * configure.in: Add rule to build Makefile in po subdirectory.
858 * Makefile.in: Rebuilt.
859 * aclocal.m4: Rebuilt.
860 * config.in: Rebuilt.
861 * configure: Rebuilt.
862 * alpha-opc.c: Internationalised.
863 * arc-dis.c: Internationalised.
864 * arc-opc.c: Internationalised.
865 * arm-dis.c: Internationalised.
866 * cgen-asm.c: Internationalised.
867 * d30v-dis.c: Internationalised.
868 * dis-buf.c: Internationalised.
869 * h8300-dis.c: Internationalised.
870 * h8500-dis.c: Internationalised.
871 * i386-dis.c: Internationalised.
872 * m10200-dis.c: Internationalised.
873 * m10300-dis.c: Internationalised.
874 * m68k-dis.c: Internationalised.
875 * m88k-dis.c: Internationalised.
876 * mips-dis.c: Internationalised.
877 * ns32k-dis.c: Internationalised.
878 * opintl.h: Internationalised.
879 * ppc-opc.c: Internationalised.
880 * sparc-dis.c: Internationalised.
881 * v850-dis.c: Internationalised.
882 * v850-opc.c: Internationalised.
884 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
886 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
887 (asm_hash_table_entries): New variable.
888 (cgen_asm_init): Free asm_hash_table_entries.
889 (hash_insn_array,hash_insn_list): New functions.
890 (build_asm_hash_table): Use them. Hash macro insns as well.
891 (cgen_asm_lookup_insn): Update.
892 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
893 (dis_hash_table_entries): New variable.
894 (cgen_dis_init): Free dis_hash_table_entries.
895 (hash_insn_array,hash_insn_list): New functions.
896 (build_dis_hash_table): Use them. Hash macro insns as well.
897 (cgen_dis_lookup_insn): Update.
898 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
899 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
900 (cgen_macro_insn_count): New function.
901 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
903 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
905 * i386-dis.c (OP_DSSI): Print segment override.
907 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
909 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
912 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
914 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
915 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
916 * configure.in: Define and substitute WIN32LDFLAGS and
918 * aclocal.m4: Rebuild with new libtool.
919 * configure, Makefile.in: Rebuild.
921 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
923 * m32r-opc.c: Regenerate.
925 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
927 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
928 before trying to copy it.
929 * Makefile.in: Rebuild.
931 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
933 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
935 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
937 * ns32k-dis.c (bit_extract_simple): New function to extract bits
938 from an arbitrary valid buffer instead of fetching them on demand
940 (invalid_float): use bit_extract_simple() instead of bit_extract().
942 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
944 From H.J. Lu <hjl@gnu.org>:
945 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
948 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
950 * Branched binutils 2.9.
952 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
954 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
955 disassembling last 4 bytes of a section.
957 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
959 Fix some gcc -Wall warnings:
960 * arc-dis.c (print_insn): Add casts to avoid warnings.
961 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
962 * d10v-dis.c (dis_long, dis_2_short): Likewise.
963 * m10200-dis.c (disassemble): Likewise.
964 * m10300-dis.c (disassemble): Likewise.
965 * ns32k-dis.c (print_insn_ns32k): Likewise.
966 * ppc-opc.c (insert_ral, insert_ram): Likewise.
967 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
968 * cgen-opc.c (cgen_keyword_search_next): Likewise.
969 * d10v-dis.c (dis_long, dis_2_short): Likewise.
970 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
971 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
972 * tic80-dis.c (print_one_instruction): Likewise.
973 * w65-dis.c (print_operand): Likewise.
974 * z8k-dis.c (fetch_data): Likewise.
975 * a29k-dis.c: Add return type for find_byte_func_type.
976 * arc-opc.c: Include <stdio.h>. Remove declarations of
977 insert_multshift and extract_multshift.
978 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
980 (extract_value): Fully parenthesize expression.
981 * h8500-dis.c (print_insn_h8500): Initialize local variables.
982 * h8500-opc.h (h8500_table): Fully bracket initializer.
983 * w65-opc.h (optable): Likewise.
984 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
985 * i386-dis.c (OP_E): Initialize local variables.
986 * m10200-dis.c (print_insn_mn10200): Likewise.
987 * mips-dis.c (print_insn_mips16): Likewise.
988 * sh-dis.c (print_insn_shx): Likewise.
989 * v850-dis.c (print_insn_v850): Likewise.
990 * ns32k-dis.c (print_insn_arg): Declare.
991 (get_displacement, invalid_float): Declare.
992 (list_search, sign_extend, flip_bytes): Declare return type.
993 (get_displacement): Likewise.
994 (print_insn_arg): Likewise. Make d int. Fix sprintf format
996 (print_insn_ns32k): Make i unsigned.
997 (invalid_float): Make static. Declare type of val.
998 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
999 on each for iteration.
1000 * tic30-dis.c (get_indirect_operand): Likewise.
1001 * z8k-dis.c (print_insn_z8001): Declare return type.
1002 (print_insn_z8002): Likewise.
1003 (unparse_instr): Fix sprintf format strings.
1005 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1007 * mips-opc.c: Add "sync.l" and "sync.p".
1009 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1011 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1012 default m68k variant to recognize.
1014 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1015 (ctrl, cobr, mem, ea): Likewise.
1016 (print_addr): Likewise. Remove cast.
1017 (ea): Cast argument of print_addr to bfd_vma.
1019 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1021 (cgen_parse_unsigned_integer): Likewise.
1022 (cgen_parse_address): Likewise.
1024 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1026 * i960-dis.c (ctrl): Add full braces to structure initialization.
1027 (cobr, mem, reg): Likewise.
1028 (ea): Correct parenthesization in expression.
1030 * cgen-asm.c: Include <ctype.h>.
1031 (build_asm_hash_table): Remove unused local variable i.
1032 (cgen_parse_keyword): Add casts to avoid warnings.
1034 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1035 symbol. Fix indentation.
1036 (print_insn_little_arm): Likewise.
1038 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1040 * configure.in: Use AM_DISABLE_SHARED.
1041 * aclocal.m4, configure: Rebuild with libtool 1.2.
1043 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1045 These patches are courtesy of Jonathan Walton and Tony Thompson
1046 (athompso@cambridge.arm.com).
1048 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1051 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1052 both the offset and the label closest to the destination.
1054 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1056 * m32r-opc.h: Regenerate.
1058 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1060 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1062 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1064 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1065 assume that info->symbols is non-empty.
1067 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1069 * alpha-opc.c (cvtqs) There is no such thing.
1070 (cvttq): Missing most of the /*d variants.
1072 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1074 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1075 delayed branches or jumps.
1077 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1079 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1081 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1082 * tic30-dis.c (print_branch): Likewise.
1084 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1086 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1087 saved_symbol code as it is no longer needed.
1089 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1091 * cgen-asm.c: Include symcat.h.
1092 * cgen-dis.c,cgen-opc.c: Ditto.
1093 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1095 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1097 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1099 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1101 * m32r-opc.[ch]: Regenerate.
1103 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1105 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1106 arguments. Don't perform validation here.
1107 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1109 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1111 * m32r-opc.c: Regenerate.
1113 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1115 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1116 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1118 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1120 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1122 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1124 * configure.in: Get the version number from BFD.
1125 * configure: Rebuild.
1127 From H.J. Lu <hjl@gnu.org>:
1128 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1129 * Makefile.in: Rebuild.
1131 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1133 * m32r-opc.c: Regenerate.
1134 * m32r-opc.h: Regenerate.
1136 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1138 * m32r-opc.c: Regenerate.
1140 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1142 Fix rac to accept only a0:
1143 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1144 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1145 Introduce OPERAND_GPR.
1146 * d10v-dis.c (print_operand): Likewise.
1148 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1150 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1151 (cgen_hw_lookup): Make result const.
1152 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1154 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1156 * configure, aclocal.m4: Rebuild with new libtool.
1158 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1160 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1161 instructions use a PC relative branch, not absolute.
1163 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1165 * configure.in: Set libtool_enable_shared rather than
1166 libtool_shared. Remove diversion hack.
1167 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1169 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1171 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1172 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1174 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1176 * tic30-dis.c: New file.
1177 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1178 * configure.in: Handle bfd_tic30_arch.
1179 * Makefile.am: Rebuild dependencies.
1180 (CFILES): Add tic30-dis.c
1181 (ALL_MACHINES): Add tic30-dis.lo.
1182 * configure, Makefile.in: Rebuild.
1184 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1186 * m32r-opc.h (HAVE_CPU_M32R): Define.
1188 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1190 * v850-opc.c (insertion routines): If both alignment and size is
1191 wrong then report this.
1193 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1195 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1196 Only recognize instructions for the current target_processor.
1198 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1200 * d10v-dis.c (PC_MASK): Correct value.
1201 (print_operand): If there's a reloc, don't calculate the
1202 address because they could be in different sections.
1204 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1206 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1207 instruction after the 4650's "mul" instruction; nobody's using the
1208 4010 these days. If object files someday indicate which processor
1209 variant they're intended for, we can do a better job at this.
1211 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1213 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1214 table provided entry size. Use CGEN_INSN_MNEMONIC.
1215 (cgen_parse_keyword): Rewrite.
1216 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1217 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1218 * cgen-opc.c: Clean up pass over `struct foo' usage.
1219 (cgen_keyword_lookup_value): Handle "" entry.
1220 (cgen_keyword_add): Likewise.
1222 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1224 * mips-opc.c: Add FP_D to s.d instruction flags.
1226 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1228 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1230 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1232 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1233 PC relative offset forms before the 15 bit forms. An assembler command
1234 line option now chooses the default.
1236 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1238 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1239 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1241 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1243 * configure: Only build libopcodes shared if --enable-shared's value
1244 was `yes', or was set to `*opcodes*'.
1245 * aclocal.m4: Likewise.
1246 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1247 original source of this bit of code. It's not clear what the best fix
1250 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1252 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1253 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1254 offset forms before the 15 bit forms, to default to the long forms.
1256 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1258 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1260 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1262 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1263 symbol if none is present.
1264 (print_insn_big_arm): Prevent examination of stored symbol if
1267 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1269 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1271 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1273 * disassemble.c: Remove disasm_symaddr() function.
1275 * arm-dis.c: Use info->symbol instead of info->flags to determine
1276 if disassmbly should be in Thumb or Arm mode.
1278 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1280 * arm-dis.c: Add support for disassembling Thumb opcodes.
1281 (print_insn_thumb): New function.
1283 * disassemble.c (disasm_symaddr): New function.
1285 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1286 (thumb_opcodes): Table of Thumb opcodes.
1288 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1290 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1292 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1293 and 'v' as operand types.
1295 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1297 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1298 <olivier.carmona@di.epfl.ch>.
1299 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1300 which has a two word opcode with a one word argument.
1302 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1304 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1305 unsigned, not signed.
1306 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1308 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1310 * d10v-dis.c (print_operand):
1311 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1313 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1315 * d10v-opc.c (OPERAND_FLAG): Split into:
1316 (OPERAND_FFLAG, OPERAND_CFLAG) .
1320 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1322 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1323 field for all INSN_MACRO's.
1324 * mips16-opc.c: same
1326 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1328 * mips-opc.c (sync,cache): These are 3900 insns.
1330 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1332 sh-opc.h (sh_table): Remove ftst/nan.
1334 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1336 * mips-opc.c (ffc, ffs): Fix mask.
1338 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1340 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1343 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1345 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1346 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1348 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1350 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1351 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1353 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1355 * v850-dis.c (disassemble): Replace // with /* ... */
1357 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1359 * sparc-opc.c: Add wr & rd for v9a asr's.
1360 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1361 (v9a_asr_reg_names): New variable.
1362 Patch from David Miller <davem@vger.rutgers.edu>.
1364 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1366 * sparc-opc.c (v9notv9a): New insn type.
1367 (IMPDEP): Move to the end to not conflict with edge8 et al.
1368 Patch from David Miller <davem@vger.rutgers.edu>.
1370 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1372 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1374 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1376 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1378 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1380 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1381 of disassemble_info structure to determine if an overlay address
1382 has a matching symbol in low memory.
1384 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1385 new symbol_at_address_func field in disassemble_info structure.
1387 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1389 * v850-opc.c (extract_d22): Use signed arithmatic.
1391 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1393 * mips-opc.c: Three op mult is not an ISA insn.
1395 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1397 * mips-opc.c: Fix formatting.
1399 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1401 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1402 than assuming that char is signed. Explicitly sign extend 16 bit
1403 values, rather than assuming that short is 16 bits.
1404 (OP_sI, OP_J, OP_DIR): Likewise.
1406 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1408 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1411 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1413 * v850-opc.c: Fix typo in comment.
1415 * v850-dis.c (disassemble): Add test of processor type when
1416 determining opcodes.
1418 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1420 * configure.in: Use a diversion to set enable_shared before the
1421 arguments are parsed.
1422 * configure: Rebuild.
1424 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1426 * m68k-opc.c (TBL1): Use ! rather than `.
1427 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1429 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1433 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1435 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1438 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1439 * aclocal.m4: Rebuild with new libtool.
1440 * configure: Rebuild.
1442 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1444 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1446 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1448 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1450 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1452 * v850-opc.c (v850_opcodes): Further rearrangements.
1454 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1456 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1458 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1460 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1463 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1465 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1467 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1469 * v850-opc.c: Initialise processors field of v850_opcode structure.
1471 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1473 Merge changes from Martin Hunt:
1475 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1477 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1478 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1479 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1481 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1483 * d30v-dis.c (print_insn): First operand of d*i (delayed
1484 branch) instructions is relative.
1486 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1487 (d30v_operand_table): Add IMM6S3 type.
1488 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1490 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1491 and cmp instructions.
1493 * d30v-opc.c: Correct entries for repeat*, and sat*.
1494 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1495 types. Correct several formats.
1497 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1499 * d30v-opc.c (pre_defined_registers): Change control registers.
1501 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1502 SHORT_C2. Manual was incorrect.
1504 * d30v-dis.c (lookup_opcode): Return value now indicates
1505 if an opcode has a short and a long form. Used for deciding
1506 to append a ".s" or ".l".
1507 (print_insn): Append a ".s" to an instruction if it is
1508 the short form and ".l" if it is a long form. Do not append
1509 anything if the instruction has only one possible size.
1511 * d30v-opc.c: Change mulx2h to require an even register.
1512 New form: SHORT_A2; a SHORT_A form that needs an even
1513 register as the first operand.
1515 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1516 instruction was not being disassembled if there were an odd
1517 number of instructions.
1519 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1521 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1523 * v850-dis.c (disassemble): Improved display of register lists.
1525 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1527 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1528 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1529 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1530 fandnot1s, fandnot2s.
1532 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1534 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1536 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1538 * cgen-asm.c (cgen_parse_address): New argument resultp.
1539 All callers updated.
1540 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1542 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1544 * mn10200-dis.c (disassemble): PC relative instructions are
1545 relative to the next instruction, not the current instruction.
1547 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1549 * v850-dis.c (disassemble): Only signed extend values that are not
1550 returned by extract functions.
1551 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1553 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1555 * v850-opc.c: Update comments. Remove use of
1556 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1558 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1560 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1562 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1564 * configure: Rebuilt with latest devo autoconf for NT support.
1566 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1568 * v850-dis.c (disassemble): Use curly brace syntax for register
1571 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1572 where r0 is being used as a destination register.
1574 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1576 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1578 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1580 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1582 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1584 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1585 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1588 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1590 * configure (cgen_files): Add support for v850e target.
1591 * configure.in (cgen_files): Add support for v850e target.
1593 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1595 * configure (cgen_files): Add support for v850ea target.
1596 * configure.in (cgen_files): Add support for v850ea target.
1598 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1600 * configure.in (bfd_arc_arch): Add.
1601 * configure: Rebuild.
1602 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1603 * Makefile.in: Rebuild.
1604 * arc-dis.c, arc-opc.c: New files.
1605 * disassemble.c (ARCH_all): Define ARCH_arc.
1606 (disassembler): Add ARC support.
1608 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1610 * v850-dis.c (disassemble): Add support for v850EA instructions.
1612 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1613 (v850_opcodes): Add v850EA instructions.
1615 * v850-dis.c (disassemble): Add support for v850E instructions.
1617 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1618 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1619 insert_spe, extract_spe): New Functions.
1620 (v850_opcodes): Add v850E instructions.
1622 * v850-opc.c: Reorganised and re-layed out to improve readability
1625 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1627 * configure: Rebuild with autoconf 2.12.1.
1629 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * aclocal.m4, configure: Rebuild with new automake patches.
1633 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1635 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1636 * acinclude.m4: Just include acinclude.m4 from BFD.
1637 * aclocal.m4, configure: Rebuild.
1639 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1641 * Makefile.am: New file, based on old Makefile.in.
1642 * acconfig.h: New file.
1643 * acinclude.m4: New file.
1644 * stamp-h.in: New file.
1645 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1646 Removed shared library handling; now handled by libtool. Replace
1647 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1648 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1649 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1650 handling in AC_OUTPUT.
1651 * dep-in.sed: Change .o to .lo.
1652 * Makefile.in: Now built with automake.
1653 * aclocal.m4: Now built with aclocal.
1654 * config.in, configure: Rebuild.
1656 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1658 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1660 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1662 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1664 * sparc-dis.c (sorted_opcodes): New static local.
1665 (struct opcode_hash): `opcode' is pointer to const element.
1666 (build_hash): First arg is now table of sorted pointers.
1667 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1668 (compare_opcodes): Update.
1670 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1672 * cgen-opc.c: #include <ctype.h>.
1673 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1674 Handle case insensitive hashing.
1675 (hash_keyword_value): Change type of `value' to unsigned int.
1677 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1679 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1680 precision FP, mark it as such. Likewise for double precision
1681 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1684 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1686 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1688 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1689 nesting depth when all the macros are expanded.
1691 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1693 * sparc-opc.c: The fcmp v9a instructions take an integer register
1694 as a destination, not a floating point register. From Christian
1695 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1697 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1699 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1700 syntax. From Roman Hodek
1701 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1703 * i386-dis.c (twobyte_has_modrm): Fix pand.
1705 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1707 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1709 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1711 * arm-dis.c: Add prototypes for arm_decode_shift and
1714 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1716 * mips-opc.c: Add r3900 insns.
1718 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1720 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1721 print delay slot instructions on the same line. When using a PC
1722 relative load, add a comment with the value being loaded if it can
1725 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1727 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1728 to pushS/popS for segment regs and byte constant so that
1729 pushw/popw printed when in 16 bit data mode.
1731 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1732 print cbtw, cwtd in 16 bit data mode.
1733 * i386-dis.c (putop): extra case W to support above.
1735 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1736 address size prefix in 16 bit address mode.
1738 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1740 * sh-dis.c: Reindent. Rename local variable fprintf to
1743 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1745 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1747 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1749 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1751 * mips16-opc.c (mip16_opcodes): same.
1753 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1755 * m68k-opc.c (moveb): Change $d to %d.
1757 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1759 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1760 (twobyte_has_modrm): Likewise.
1762 (OP_MMX, OP_EM, OP_MS): New static functions.
1764 * i386-dis.c: Revert patch of April 4. The output now matches
1767 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1769 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1772 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1774 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1776 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1778 * Makefile.in (install): Depend upon installdirs.
1779 (installdirs): New target.
1781 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1783 From Thomas Graichen <graichen@rzpd.de>:
1784 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1785 * configure: Rebuild.
1787 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1789 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1790 Delete string{,s}.h support.
1792 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1794 * cgen-asm.c (cgen_parse_operand_fn): New global.
1795 (cgen_parse_{{,un}signed_integer,address}): Update call to
1796 cgen_parse_operand_fn.
1797 (cgen_init_parse_operand): New function.
1798 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1799 from cgen_asm_init_parse.
1800 (m32r_cgen_assemble_insn): New operand `errmsg'.
1801 Delete call to as_bad, return error message to caller.
1802 (m32r_cgen_asm_hash_keywords): #if 0 out.
1804 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1806 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1808 [case 'J']: Fix typo in register name.
1810 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * configure.in: Substitute SHLIB_LIBS.
1813 * configure: Rebuild.
1814 * Makefile.in (SHLIB_LIBS): New variable.
1815 ($(SHLIB)): Use $(SHLIB_LIBS).
1817 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1819 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1821 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1823 * disassemble.c (disassembler): Handle m32r.
1825 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1827 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1828 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1829 * Makefile.in (CFILES): Add them.
1830 (ALL_MACHINES): Add them.
1831 (dependencies): Regenerate.
1832 * configure.in (cgen_files): New variable.
1833 (bfd_m32r_arch): Add entry.
1834 * configure: Regenerate.
1836 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1838 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1839 * configure: Rebuild.
1841 * Makefile.in: Rebuild dependencies.
1843 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1845 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1848 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1850 * Branched binutils 2.8.
1852 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1854 * m10200-dis.c: Rename from mn10200-dis.c.
1855 * m10200-opc.c: Rename from mn10200-opc.c.
1856 * m10300-dis.c: Rename from mn10300-dis.c
1857 * m10300-opc.c: Rename from mn10300-opc.c.
1858 * Makefile.in: Update accordingly.
1860 * mips16-opc.c: Add mul and dmul macros.
1862 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1864 * makefile.vms: Update CFLAGS, add clean target.
1866 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1868 * mips-opc.c: Add "wait". From Ralf Baechle
1869 <ralf@gnu.ai.mit.edu>.
1871 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1872 * configure, config.in: Rebuild.
1873 * sysdep.h: Include <stdlib.h> if it exists.
1874 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1876 * Makefile.in: Rebuild dependencies.
1878 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1880 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1881 Andrew Bray <andy@madhouse.demon.co.uk>.
1883 * mips-opc.c: Add cast when setting mips_opcodes.
1885 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1887 * v850-dis.c (disassemble): Fix sign extension problem.
1888 * v850-opc.c (extract_d*): Fix sign extension problems to make
1889 disassembly calculate branch offsets correctly.
1891 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1893 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1895 * mips-opc.c: Add dctr and dctw.
1897 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1899 * d30v-dis.c (print_insn): Change the way signed constants
1902 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1904 * Makefile.in (BFD_H): New variable.
1905 (HFILES): New variable.
1906 (CFILES): Add all C files.
1907 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1908 Delete old dependencies, and build new ones.
1909 * dep-in.sed: New file.
1911 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1913 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1915 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1917 * mn10200-opc.c: Change "trap" to "syscall".
1918 * mn10300-opc.c: Add new "syscall" instruction.
1920 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1922 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1923 mulul insns on the coldfire.
1925 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1927 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1928 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1929 (print_insn_little_arm): Likewise.
1931 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1933 Based on patches from H.J. Lu <hjl@lucon.org>:
1934 * i386-dis.c (fetch_data): Add prototype.
1935 * m68k-dis.c (fetch_data): Add prototype.
1936 (dummy_print_address): Add prototype. Make static.
1937 * ppc-opc.c (valid_bo): Add prototype.
1938 * sparc-dis.c (build_hash_table): Add prototype.
1939 (is_delayed_branch, compute_arch_mask): Add prototypes.
1940 (print_insn_sparc): Make several local variables const.
1941 (compare_opcodes): Change arguments to const PTR. Add prototype.
1942 * sparc-opc.c (arg): Change name field to be const.
1943 (lookup_name, lookup_value): Add prototypes. Change table and
1944 name parameters to be const.
1945 (sparc_encode_asi): Change name parameter to be const.
1946 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1947 (sparc_encode_sparclet_cpreg): Likewise.
1948 (sparc_decode_asi): Change return type to be const.
1949 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1950 (sparc_decode_sparclet_cpreg): Likewise.
1952 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1954 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1955 Solaris doesn't like the combined options, and the -f is
1957 (stamp-tshlink, install): Likewise.
1959 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1961 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1964 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1966 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1968 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1970 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1973 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1975 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1977 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1979 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1981 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1983 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1985 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1987 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1988 floatformat_to_double to make portable.
1989 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1992 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1994 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1995 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1997 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1999 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2000 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2002 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2004 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2005 (OFF_SL_BR_SCALED): ... to this, and added the flag
2006 TIC80_OPERAND_BASEREL to the flags word.
2007 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2010 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2012 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2013 Change mips_opcodes from const array to a pointer,
2014 and change bfd_mips_num_opcodes from const int to int,
2015 so that we can increase the size of the mips opcodes table
2018 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2020 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2021 store BITNUM values in the table in one's complement form
2022 to match behavior when assembler is given a raw numeric
2023 value for a BITNUM operand.
2024 * tic80-dis.c (print_operand_bitnum): Ditto.
2026 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2028 * d30v-opc.c: Removed references to FLAG_X.
2030 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2032 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2034 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2036 * Makefile.in: Added d30v object files.
2037 * configure: (bfd_d30v_arch) Rebuilt.
2038 * configure.in: (bfd_d30v_arch) Added new case.
2039 * d30v-dis.c: New file.
2040 * d30v-opc.c: New file.
2041 * disassemble.c (disassembler) Add entry for d30v.
2043 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2045 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2046 representations for the floating point BITNUM values.
2048 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2050 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2051 in the table in one's complement form, as they appear in the
2053 (tic80_symbol_to_value): Use macros to access predefined
2055 (tic80_value_to_symbol): Ditto.
2056 (tic80_next_predefined_symbol): New function.
2057 * tic80-dis.c (print_operand_bitnum): Remove code that did
2058 one's complement for BITNUM values.
2060 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2062 * makefile.vms: Remove 8 bit characters. Update to latest
2065 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2067 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2069 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2071 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2072 (IMM24_PCREL): Likewise.
2074 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2076 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2077 address for an extended PC relative instruction that is not a
2080 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2082 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2085 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2087 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2088 (tic80_opcodes): Sort entries so that long immediate forms
2089 come after short immediate forms, making it easier for
2090 assembler to select the right one for a given operand.
2092 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2094 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2096 (print_insn_mips16): Likewise.
2098 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2100 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2101 a symbol class that restricts translation to just that
2102 class (general register, condition code, etc).
2104 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2106 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2107 and REG_DEST_E for register operands that have to be
2108 an even numbered register. Add REG_FPA for operands that
2109 are one of the floating point accumulator registers.
2110 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2111 (tic80_opcodes): Change entries that need even numbered
2112 register operands to use the new operand table entries.
2113 Add "or" entries that are identical to "or.tt" entries.
2115 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2117 * mips16-opc.c: Add new cases of exit instruction for
2119 * mips-dis.c (print_mips16_insn_arg): Display floating point
2120 registers in operands of exit instruction. Print `$' before
2121 register names in operands of entry and exit instructions.
2123 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2125 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2126 pairs for all predefined symbols recognized by the assembler.
2127 Also used by the disassembling routines.
2128 (tic80_symbol_to_value): New function.
2129 (tic80_value_to_symbol): New function.
2130 * tic80-dis.c (print_operand_control_register,
2131 print_operand_condition_code, print_operand_bitnum):
2132 Remove private tables and use tic80_value_to_symbol function.
2134 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2136 * d10v-dis.c (print_operand): Change address printing
2137 to correctly handle PC wrapping. Fixes PR11490.
2139 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2141 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2144 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2146 * mips-dis.c (print_insn_mips16): Set insn_info information.
2147 (print_mips16_insn_arg): Likewise.
2149 * mips-dis.c (print_insn_mips16): Better handling of an extend
2150 opcode followed by an instruction which can not be extended.
2152 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2154 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2155 coldfire moveb instruction to not allow an address register as
2156 destination. Although the documentation does not indicate that
2157 this is invalid, experiments uncovered unexpected behavior.
2158 Added a comment explaining the situation. Thanks to Andreas
2159 Schwab for pointing this out to me.
2161 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2163 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2164 entries are presorted so that entries with the same mnemonic are
2165 adjacent to each other in the table. Sort the entries for each
2166 instruction so that this is true.
2168 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2170 * m68k-dis.c: Include <libiberty.h>.
2171 (print_insn_m68k): Sort the opcode table on the most significant
2172 nibble of the opcode.
2174 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2176 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2177 "vsub", "vst", "xnor", and "xor" instructions.
2178 (V_a1): Renamed from V_a, msb of accumulator reg number.
2179 (V_a0): Add macro, lsb of accumulator reg number.
2181 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2183 * tic80-dis.c (print_insn_tic80): Broke excessively long
2184 function up into several smaller ones and arranged for
2185 the instruction printing function to be callable recursively
2186 to print vector instructions that have both a load and a
2187 math instruction packed into a single opcode.
2188 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2189 to explain why it comes after the other vector opcodes.
2191 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2193 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2194 move insns to handle immediate operands.
2196 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2198 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2199 fix operand mask in the "moveml" entries for the coldfire.
2201 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2203 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2204 New macros for building vector instruction opcodes.
2205 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2206 FMT_LI, which were unused. The field is now a flags field.
2207 Remove some opcodes that are possible, but illegal, such
2208 as long immediate instructions with doubles for immediate
2209 values. Add "vadd" and "vld" instructions.
2211 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2213 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2214 the order more logical. Move the shift alias instructions ("rotl",
2215 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2216 interspersed with the regular sr.x and sl.x instructions. Add
2217 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2218 "sub", "subu", "swcr", and "trap".
2220 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2222 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2223 (OFF_SL_PC): Renamed from OFF_SL.
2224 (OFF_SS_BR): New operand type for base relative operand.
2225 (OFF_SL_BR): New operand type for base relative operand.
2226 (REG_BASE): New operand type for base register operand.
2227 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2228 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2229 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2231 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2232 10 char field, padded with spaces on rhs, rather than a string
2233 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2234 than old TIC80_OPERAND_RELATIVE. Add support for new
2235 TIC80_OPERAND_BASEREL flag bit.
2237 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2239 * tic80-dis.c (print_insn_tic80): Print floating point operands
2241 * tic80-opc.c (SPFI): Add single precision floating point
2242 immediate operand type.
2243 (ROTATE): Add rotate operand type for shifts.
2244 (ENDMASK): Add for shifts.
2245 (n): Macro for the 'n' bit.
2246 (i): Macro for the 'i' bit.
2247 (PD): Macro for the 'PD' field.
2248 (P2): Macro for the 'P2' field.
2249 (P1): Macro for the 'P1' field.
2250 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2253 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2255 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2256 adding in current address for pc-relative operands.
2258 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2260 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2261 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2262 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2263 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2264 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2265 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2266 (REG_SCALED, LSI_SCALED): New operand types.
2267 (E): New macro for 'E' bit at bit 27.
2268 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2269 opcodes, including the various size flavors (b,h,w,d) for
2270 the direct load and store instructions.
2272 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2274 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2276 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2277 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2278 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2279 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2280 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2281 masks with "MASK_* & ~M_*" to get the M bit reset.
2282 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2284 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2286 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2287 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2288 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2290 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2291 CC, SICR, and LICR table entries.
2292 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2293 "bcnd", and "brcr" opcodes.
2295 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2297 * ppc-opc.c (powerpc_operands): Make comment match the
2298 actual fields (no shift field).
2299 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2300 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2301 partial implementation, work in progress.
2302 * tic80-opc.c (tic80_operands): Begin construction operands table.
2303 (tic80_opcodes): Continue populating opcodes table and start
2304 filling in the operand indices.
2305 (tic80_num_opcodes): Add this.
2307 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2309 * m68k-opc.c: Add #B case for moveq.
2311 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2313 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2314 before they are used.
2316 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2318 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2319 for "breakpoint" instruction.
2321 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2323 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2324 (dep): Use ALL_CFLAGS rather than CFLAGS.
2326 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2328 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2331 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2333 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2334 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2336 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2338 * mips16-opc.c: Add "abs".
2340 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2342 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2343 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2344 (disassembler): Add bfd_arch_tic80 support to set disassemble
2345 to print_insn_tic80.
2346 * tic80-dis.c (print_insn_tic80): Add stub.
2348 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2350 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2351 * configure: Regenerate with autoconf.
2352 * tic80-dis.c: Add file.
2353 * tic80-opc.c: Add file.
2355 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2357 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2359 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2361 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2362 (mn10200_opcodes): Use it for some logicals and btst insns.
2363 Add "break" and "trap" instructions.
2365 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2367 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2369 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2371 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2372 relative load or add now depends upon whether the instruction is
2375 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2377 * mn10200-dis.c: Finish writing disassembler.
2378 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2379 Fix mask for "jmp (an)".
2381 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2382 handle endianness issues for mn10300.
2384 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2386 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2388 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2389 instruction. Fix opcode field for "movb (imm24),dn".
2391 * mn10200-opc.c (mn10200_operands): Fix insertion position
2394 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2396 * mn10200-opc.c: Create mn10200 opcode table.
2397 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2398 but moving along nicely.
2400 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2402 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2404 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2406 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2407 specifiers for fmovem* instructions.
2409 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2411 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2413 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2415 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2418 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2420 * mn10300-opc.c: Add some comments explaining the various
2423 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2425 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2427 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2430 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2431 operand specifiers in fmovm* instructions.
2433 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2435 * ppc-opc.c (insert_li): Give an error if the offset has the two
2436 least significant bits set.
2438 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2440 * mips-dis.c (print_insn_mips16): Separate the instruction from
2441 the arguments with a tab, not a space.
2443 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2445 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2448 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2451 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2453 * configure: Rebuild with autoconf 2.12.
2455 Add support for mips16 (16 bit MIPS implementation):
2456 * mips16-opc.c: New file.
2457 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2458 (mips16_reg_names): New static array.
2459 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2460 after seeing a 16 bit symbol.
2461 (print_insn_little_mips): Likewise.
2462 (print_insn_mips16): New static function.
2463 (print_mips16_insn_arg): New static function.
2464 * mips-opc.c: Add jalx instruction.
2465 * Makefile.in (mips16-opc.o): New target.
2466 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2467 * configure: Rebuild.
2469 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2471 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2472 operand specifiers in *save, *restore and movem* instructions.
2474 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2477 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2478 register operands for immediate arithmetic, not, neg, negx, and
2479 set according to condition instructions.
2481 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2482 specifier of the effective-address operand in immediate forms of
2483 arithmetic instructions. The specifier for the immediate operand
2484 notes how and where the constant will be stored.
2486 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2488 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2491 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2494 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2496 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2498 * mn10300-dis.c (disassemble): Handle register lists.
2500 * mn10300-opc.c: Fix handling of register list operand for
2501 "call", "ret", and "rets" instructions.
2503 * mn10300-dis.c (disassemble): Print PC-relative and memory
2504 addresses symbolically if possible.
2505 * mn10300-opc.c: Distinguish between absolute memory addresses,
2506 pc-relative offsets & random immediates.
2508 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2510 (disassemble): Handle SPLIT and EXTENDED operands.
2512 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2514 * mn10300-dis.c: Rough cut at printing some operands.
2516 * mn10300-dis.c: Start working on disassembler support.
2517 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2519 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2521 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2523 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2525 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2527 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2529 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2530 register argument is calls and jmp instructions.
2532 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2534 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2535 getx operand. Fix opcode for mulqu imm,dn.
2537 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2539 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2540 in MN10300_OPERAND_SPLIT operands for how many bits
2541 appear in the basic insn word. Add IMM32_HIGH24,
2542 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2543 (mn10300_opcodes): Use new operands as needed.
2545 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2546 for bset, bclr, btst instructions.
2547 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2549 * mn10300-opc.c (mn10300_operands): Remove many redundant
2550 operands. Update opcode table as appropriate.
2551 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2552 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2554 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2556 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2557 operands (for indexed load/stores). Fix bitpos for DI
2558 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2559 few instructions that insert immediates/displacements in the
2560 middle of the instruction. Add IMM8E for 8 bit immediate in
2561 the extended part of an instruction.
2562 (mn10300_operands): Use new opcodes as appropriate.
2564 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2566 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2567 sequential so the assembler never parallelizes it with
2570 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2572 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2573 a data/address register that appears in register field 0
2574 and register field 1.
2575 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2577 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2579 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2580 standard disassembly.
2582 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2583 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2584 Recategorize PALcode instructions.
2586 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2588 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2590 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2592 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2593 there are no operand types.
2595 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2597 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2599 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2601 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2603 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2605 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2607 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2608 and sst.w instructions.
2610 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2613 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2615 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2618 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2620 * ppc-opc.c (PPCPWR2): Define.
2621 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2624 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2626 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2627 field for movhu instruction.
2629 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2630 cast value to "long" not "signed long" to keep hpux10
2633 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2635 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2638 * mn10300-opc.c (FMT*): Remove definitions.
2640 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2641 for shift-by-register opcodes.
2643 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2644 into [AD][MN][01] for encoding the position of the register
2647 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2650 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2652 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2654 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2655 Fix various typos. Add "PAREN" operand.
2656 (MEM, MEM2): Define.
2657 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2658 operands. Fix several typos.
2660 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2663 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2665 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2666 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2668 (mn10300_opcodes): Break opcode format out into its own field.
2669 Update many operand fields to deal with signed vs unsigned
2670 issues. Fix one or two typos in the "mov" instruction
2671 opcode, mask and/or operand fields.
2673 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2675 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2676 m68851 wasn't reset.
2678 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2680 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2681 all opcodes. Very rough cut at operands for all opcodes.
2683 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2686 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2688 * mn10200-opc.c, mn10300-opc.c: New files.
2689 * mn10200-dis.c, mn10300-dis.c: New files.
2690 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2691 * disassemble.c: Break mn10x00 support into 10200 and 10300
2693 * configure.in: Likewise.
2694 * configure: Rebuilt.
2696 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2698 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2700 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2702 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2704 * disassemble (ARCH_mn10x00): Define.
2705 (disassembler): Handle bfd_arch_mn10x00.
2706 * configure.in: Recognize bfd_mn10x00_arch.
2707 * configure: Rebuilt.
2709 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2711 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2712 accordingly. Don't declare functions using op_rtn.
2714 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2716 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2717 params to be more standard.
2718 * (disassemble): Print absolute addresses and symbolic names for
2719 branch and jump targets.
2720 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2722 * (v850_opcodes): Add breakpoint insn.
2724 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * m68k-opc.c: Move the fmovemx data register cases before the
2727 other cases, so that they get recognized before the data register
2728 does gets treated as a degenerate register list.
2730 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2732 * mips-opc.c: Add a case for "div" and "divu" with two registers
2733 and a destination of $0.
2735 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2737 * mips-dis.c (print_insn_arg): Add prototype.
2738 (_print_insn_mips): Ditto.
2740 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2742 * mips-dis.c (print_insn_arg): Print condition code registers as
2745 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2747 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2749 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2751 * v850-dis.c (disassemble): Make static. Provide prototype.
2753 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2755 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2758 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2760 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2761 ']' characters into the output stream.
2762 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2763 Add "memop" field to all opcodes (for the disassembler).
2764 Reorder opcodes so that "nop" comes before "mov" and "jr"
2765 comes before "jarl".
2767 * v850-dis.c (print_insn_v850): Fix typo in last change.
2769 * v850-dis.c (print_insn_v850): Properly handle disassembling
2770 a two byte insn at the end of a memory region when the memory
2771 region's size is only two byte aligned.
2773 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2775 * v850-dis.c (v850_reg_names): Define.
2776 (v850_sreg_names, v850_cc_names): Likewise.
2777 (disassemble): Very rough cut at printing operands (unformatted).
2779 * v850-opc.c (BOP_MASK): Fix.
2780 (v850_opcodes): Fix mask for jarl and jr.
2782 * v850-dis.c: New file. Skeleton for disassembler support.
2783 * Makefile.in Remove v850 references, they're not needed here.
2784 * configure.in: Add v850-dis.o when building v850 toolchains.
2785 * configure: Rebuilt.
2786 * disassemble.c (disassembler): Call v850 disassembler.
2788 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2789 (insert_d8_6, extract_d8_6): New functions.
2790 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2791 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2793 (IF4A, IF4B): Use "D7" instead of "D7S".
2794 (IF4C, IF4D): Use "D8_7" instead of "D8".
2795 (IF4E, IF4F): New. Use "D8_6".
2796 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2797 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2799 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2800 (v850_operands): Change D16 to D16_15, use special insert/extract
2801 routines. New new D16 that uses the generic insert/extract code.
2802 (IF7A, IF7B): Use D16_15.
2803 (IF7C, IF7D): New. Use D16.
2804 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2806 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2807 message. Issue an error if the branch offset is odd.
2809 * v850-opc.c: Add notes about needing special insert/extract
2810 for all the load/store insns, except "ld.b" and "st.b".
2812 * v850-opc.c (insert_d22, extract_d22): New functions.
2813 (v850_operands): Use insert_d22 and extract_d22 for
2815 (insert_d9): Fix range check.
2817 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2819 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2820 and set bits field to D9 and D22 operands.
2822 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2824 * v850-opc.c (v850_operands): Define SR2 operand.
2825 (v850_opcodes): "ldsr" uses R1,SR2.
2827 * v850-opc.c (v850_opcodes): Fix opcode specs for
2828 sld.w, sst.b, sst.h, sst.w, and nop.
2830 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2832 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2833 end of the opcode table.
2835 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2837 * d10v-opc.c (pre_defined_registers): Added register pairs,
2838 "r0-r1", "r2-r3", etc.
2840 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2842 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2843 Create I16U for an unsigned 16bit mmediate operand.
2844 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2846 * v850-opc.c (v850_operands): Define EP operand.
2847 (IF4A, IF4B, IF4C, IF4D): Use EP.
2849 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2850 with immediate operand, "movhi". Tweak "ldsr".
2852 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2853 correct. Get sld.[bhw] and sst.[bhw] closer.
2855 * v850-opc.c (v850_operands): "not" is a two byte insn
2857 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2859 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2861 * v850-opc.c (two): Get order of words correct.
2863 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2865 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2866 register source and destination operands.
2867 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2869 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2870 same thinko in "trap" opcode.
2872 * v850-opc.c (v850_opcodes): Add initializer for size field
2875 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2876 Add D8 for 8-bit unsigned field in short load/store insns.
2877 (IF4A, IF4D): These both need two registers.
2878 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2879 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2880 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2881 for "ldsr" and "stsr".
2882 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2885 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2886 short store word (sst.w).
2888 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2890 * v850-opc.c (v850_operands): Added insert and extract fields,
2891 pointers to functions that handle unusual operand encodings.
2893 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2895 * v850-opc.c (v850_opcodes): Enable "trap".
2897 * v850-opc.c (v850_opcodes): Fix order of displacement
2898 and register for "set1", "clr1", "not1", and "tst1".
2900 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2902 * v850-opc.c (v850_operands): Add "B3" support.
2903 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2906 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2908 * v850-opc.c: Close unterminated comment.
2910 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2912 * v850-opc.c (v850_operands): Add flags field.
2913 (v850_opcodes): add move opcodes.
2915 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2917 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2918 * configure: (bfd_v850v_arch) Add new case.
2919 * configure.in: (bfd_v850_arch) Add new case.
2920 * v850-opc.c: New file.
2922 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2924 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2926 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2928 * d10v-opc.c: Add additional information to the opcode
2929 table to help determinine which instructions can be done
2932 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2934 * mpw-make.sed: Update editing of include pathnames to be
2937 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2939 * arm-opc.h: Added "bx" instruction definition.
2941 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2943 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2945 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2947 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2949 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2951 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2953 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2955 * makefile.vms: Update for alpha-opc changes.
2957 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2959 * i386-dis.c (print_insn_i386): Actually return the correct value.
2960 (ONE, OP_ONE): #ifdef out; not used.
2962 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2964 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2965 Changed subi operand type to treat 0 as 16.
2967 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2969 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2972 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2974 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2975 memory transfer instructions. Add new format string entries %h and %s.
2976 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2979 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2981 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2982 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2984 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2986 * alpha-dis.c (print_insn_alpha_osf): Remove.
2987 (print_insn_alpha_vms): Remove.
2988 (print_insn_alpha): Make globally visible. Chose the register
2989 names based on info->flavour.
2990 * disassemble.c: Always return print_insn_alpha for the alpha.
2992 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2994 * d10v-dis.c (dis_long): Handle unknown opcodes.
2996 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2998 * d10v-opc.c: Changes to support signed and unsigned numbers.
2999 All instructions with the same name that have long and short forms
3000 now end in ".l" or ".s". Divs added.
3001 * d10v-dis.c: Changes to support signed and unsigned numbers.
3003 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3005 * d10v-dis.c: Change all functions to use info->print_address_func.
3007 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3009 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3010 move ccr/sr insns more strict so that the disassembler only
3011 selects them when the addressing mode is data register.
3013 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3014 * d10v-opc.c (pre_defined_registers): Declare.
3015 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3016 to pick a better name for the registers.
3018 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3020 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3021 operands for fexpand and fpmerge. From Christian Kuehnke
3022 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3024 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3026 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3027 print routine. Take new regnames and cpumask arguments.
3028 Kill the environment variable nonsense.
3029 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3030 (print_insn_alpha_vms): New function. Do VMS style regnames.
3031 * disassemble.c (disassembler): Test bfd flavour to pick
3032 between OSF and VMS routines. Default to OSF.
3034 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3036 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3037 * configure: Rebuild.
3038 * Makefile.in (install): Use @INSTALL_SHLIB@.
3040 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3042 * configure: (bfd_d10v_arch) Add new case.
3043 * configure.in: (bfd_d10v_arch) Add new case.
3044 * d10v-dis.c: New file.
3045 * d10v-opc.c: New file.
3046 * disassemble.c (disassembler) Add entry for d10v.
3048 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3050 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3051 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3053 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3055 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3056 distinguish between variants of the instruction set.
3057 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3058 distinguish between variants of the instruction set.
3060 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3062 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3063 the 8086 instruction set.
3064 * i386-dis.c: General cleanups. Make most things static. Add
3065 prototypes. Get rid of static variables aflags and dflags. Pass
3066 them as args (to almost everything).
3068 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3070 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3072 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3074 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3075 if the next arg is marked with SRC_IN_DST. Gross.
3077 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3078 we're looking for and find EXR.
3080 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3081 if we're looking for KBIT and we don't find it.
3083 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3086 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3087 3bit immediate operands.
3089 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3091 * Released binutils 2.7.
3093 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3094 <kkaempf@progis.ac-net.de>.
3096 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3098 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3100 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3102 * sparc-dis.c (print_insn_sparclite): New routine to print
3103 sparclite instructions.
3105 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3107 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3109 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3111 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3112 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3113 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3115 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3117 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3118 Use autoconf-set values.
3119 (docdir, oldincludedir): Removed.
3120 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3122 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3124 * alpha-opc.c: New file.
3125 * alpha-opc.h: Remove.
3126 * alpha-dis.c: Complete rewrite to use new opcode table.
3127 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3128 * configure: Rebuild with autoconf 2.10.
3129 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3130 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3132 (alpha-opc.o): New target.
3134 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3136 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3137 Set imm_added_to_rs1 even if the source and destination register
3140 * sparc-opc.c: Add some two operand forms of the wr instruction.
3142 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3144 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3147 * disassemble.c (disassembler): Handle H8/S.
3148 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3150 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3152 * sparc-opc.c: Add beq/teq as aliases for be/te.
3154 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3155 <sergei@msil.sps.mot.com>.
3157 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3159 * makefile.vms: New file.
3161 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3163 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3165 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3168 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3170 * i386-dis.c (OP_OFF): Call append_prefix.
3172 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3174 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3175 unsigned long to silence a warning from the Solaris PowerPC
3178 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3180 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3182 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3184 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3186 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3187 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3188 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3189 cpush, cpusha, cpull sparclet insns.
3191 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3193 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3195 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3197 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3198 Set F_FLOAT on other floating point instructions.
3200 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3202 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3204 (powerpc_opcodes): Add 860/821 specific SPRs.
3206 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3208 * configure.in: Permit --enable-shared to specify a list of
3209 directories. Set and substitute BFD_PICLIST.
3210 * configure: Rebuild.
3211 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3212 uses. Set to @BFD_PICLIST@.
3214 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3216 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3217 not "abs", which may be needed for the absolute in something
3218 like btst #0,@10:8. Print L_3 immediates separately from other
3219 immediates. Change ABSMOV reference to ABS8MEM.
3221 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3223 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3224 (current_arch_mask): New static global.
3225 (compute_arch_mask): New static function.
3226 (print_insn_sparc): Delete sparc_v9_p. New static local
3227 current_mach. Resort opcode table if current_mach changes.
3228 Generalize "insn not supported" test.
3229 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3230 Delete test for v9/!v9.
3231 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3233 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3234 (brfcx): Renamed to FBRX.
3235 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3236 coprocessor mnemonics are not supported on the sparclet).
3237 (condf): Renamed to CONDF.
3238 (SLCBCC2): Delete F_ALIAS flag.
3240 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3242 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3243 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3245 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3247 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3248 that the shared library version number is set correctly.
3250 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3252 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3253 Miles Bader <miles@gnu.ai.mit.edu>.
3254 * configure: Rebuild.
3256 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3258 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3261 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3263 * configure: Rebuild with autoconf 2.8.
3265 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3267 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3268 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3270 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3272 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3273 since they appear as targets in Makefile.in.
3274 * configure: Rebuild.
3276 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3278 * mpw-make.sed: Edit out shared library support bits.
3280 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3282 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3283 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3284 (sparc_opcodes): Add sparclet insns.
3285 (sparclet_cpreg_table): New static local.
3286 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3287 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3289 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3291 * i386-dis.c (index16): New static variable.
3292 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3294 (OP_indirE): Return result of OP_E.
3295 (OP_E): Check for 16 bit addressing mode, and disassemble
3296 correctly. Optimised 32 bit case a little. Don't print
3297 "(base,index,scale)" when sib specifies only an offset.
3299 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3301 * configure.in: Set and substitute SHLIB_DEP.
3302 * configure: Rebuild.
3303 * Makefile.in (SHLIB_DEP): New variable.
3304 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3305 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3306 COMMON_SHLIB, add them to piclist with appropriate modifications.
3307 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3308 here: just use piclist.
3310 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3312 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3313 (print_insn_sparc): Rewrite v9/not-v9 tests.
3314 (compare_opcodes): Likewise.
3315 * sparc-opc.c (MASK_<ARCH>): Define.
3316 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3317 (sparclet,v6notv9): Define.
3318 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3319 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3321 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3323 * configure.in: Call AC_PROG_CC before configure.host.
3324 * configure: Rebuild.
3326 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3328 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3330 * i386-dis.c (onebyte_has_modrm): New static array.
3331 (twobyte_has_modrm): New static array.
3332 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3334 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3336 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3339 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3341 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3344 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3346 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3347 m68010up, not just m68020up | cpu32.
3349 * Makefile.in (SONAME): New variable.
3350 ($(SHLINK)): Make a link to the transformed name, as well.
3351 (stamp-tshlink): New target.
3352 (install): Skip stamp-tshlink during install.
3354 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3356 * configure.in: Call AC_ARG_PROGRAM.
3357 * configure: Rebuild.
3358 * Makefile.in (program_transform_name): New variable.
3359 (install): Transform library name before installing it.
3361 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3363 * i960-dis.c (mem): Add HX dcinva instruction.
3365 Support for building as a shared library, based on patches from
3366 Alan Modra <alan@spri.levels.unisa.edu.au>:
3367 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3368 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3369 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3370 * configure: Rebuild.
3371 * Makefile.in (ALLLIBS): New variable.
3372 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3373 (COMMON_SHLIB, SHLINK): New variables.
3374 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3375 (STAGESTUFF): Remove variable.
3376 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3377 (stamp-piclist, piclist): New targets.
3378 ($(SHLIB), $(SHLINK)): New targets.
3379 ($(OFILES)): Depend upon stamp-picdir.
3380 (disassemble.o): Build twice if PICFLAG is set.
3381 (MOSTLYCLEAN): Add pic/*.o.
3382 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3383 (distclean): Remove pic and stamp-picdir.
3384 (install): Install shared libraries.
3385 (stamp-picdir): New target.
3387 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3389 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3390 Print unknown instruction as "unknown", rather than in hex.
3392 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3394 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3396 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3398 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3400 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3402 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3403 when necessary. From Ulrich Drepper
3404 <drepper@myware.rz.uni-karlsruhe.de>.
3406 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3408 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3409 sparc_num_opcodes. Update architecture enum values.
3410 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3411 (sparc_opcode_lookup_arch): New function.
3412 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3413 (sparc_opcodes): Add v9a shutdown insn.
3415 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3417 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3418 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3420 (print_insn_sparc64): Deleted.
3421 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3424 * sparc-opc.c (architecture_pname): Add v9a.
3426 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3428 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3429 incorrectly defined as 0x16 when it should be 0x15.
3430 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3431 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3432 excb (exception barrier) which is defined in the Alpha
3433 Architecture Handbook version 2.
3434 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3435 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3436 disassembled as or, for example.
3438 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3440 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3441 (_print_insn_mips): Change i from int to unsigned int.
3443 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3445 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3446 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3448 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3450 * i386-dis.c: Added Pentium Pro instructions.
3452 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3454 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3457 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3459 * sh-opc.h (sh_nibble_type): Added REG_B.
3460 (sh_arg_type): Added A_REG_B.
3461 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3463 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3465 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3467 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3469 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3471 * Makefile.in (distclean): Remove stamp-h. From Ronald
3472 F. Guilmette <rfg@monkeys.com>.
3474 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3476 From David Mosberger-Tang <davidm@azstarnet.com>:
3477 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3480 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3482 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3483 (sh_table): Added many SH3 opcodes.
3484 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3486 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3488 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3489 (subco,subco.): Mark this PPC, not PPCCOM.
3491 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3493 * configure: Rebuild with autoconf 2.7.
3495 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3497 * configure: Rebuild with autoconf 2.6.
3499 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3501 * configure.in: Sort list of architectures. Accept but do nothing
3502 for alliant, convex, pyramid, romp, and tahoe.
3504 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3506 * a29k-dis.c (print_special): Change num to unsigned int.
3508 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3510 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3513 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3515 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3516 * configure: Rebuilt.
3518 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3520 * configure.in: Add case for bfd_i860_arch.
3521 * configure: Rebuild.
3523 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3525 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3526 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3527 (NEXTDOUBLE): Likewise.
3528 (print_insn_m68k): Don't match fmoveml if there is more than one
3529 register in the list.
3530 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3532 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3534 * m68k-opc.c: Use #W rather than #w.
3535 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3537 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3539 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3540 and likewise for all the dbxx opcodes.
3542 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3544 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3546 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3548 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3549 the VR4100 specific instructions to the mips_opcodes structure.
3551 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3553 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3554 ugly Metrowerks bug in CW6, is fixed in CW7.
3556 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3558 * ppc-opc.c (whole file): Add flags for common/any support.
3560 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3562 * Makefile.in (BISON): Remove macro.
3563 (FLAGS_TO_PASS): Remove BISON.
3565 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3567 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3569 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3570 instructions that take no args by looking at the match mask.
3571 (print_insn_arg): Always print "%" before register names.
3572 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3573 [case '_']: Don't print "@#" before address.
3574 [case 'J']: Use "%s" as format string, not register name.
3575 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3577 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3579 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3582 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3584 From David Mosberger-Tang <davidm@azstarnet.com>
3586 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3587 (alpha_insn_set): added definitions for VAX floating point
3588 instructions (Unix compilers don't generate these, but handcoded
3589 assembly might still use them).
3591 * alpha-dis.c (print_insn_alpha): added support for disassembling
3592 the miscellaneous instructions in the Alpha instruction set.
3594 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3596 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3597 no longer create sysdep.h, sed ppc-opc.c to work around a
3598 serious Metrowerks C bug.
3599 * mpw-make.in: Remove.
3600 * mpw-make.sed: New file, used by mpw-configure to edit
3601 Makefile.in into an MPW makefile.
3603 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3605 * Makefile.in (maintainer-clean): New synonym for realclean.
3607 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3609 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3610 which use '0', '1', and '2' instead. Specify the proper size for
3611 a pmove immediate operand. Correct the pmovefd patterns to be
3612 moves to a register, not from a register.
3613 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3615 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3617 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3618 %psr, %wim, %tbr as F_NOTV9.
3620 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3622 * Makefile.in (Makefile): Just rebuild Makefile when running
3624 (config.h, stamp-h): New targets.
3625 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3626 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3627 rebuilding config.h.
3628 * configure: Rebuild.
3630 * mips-opc.c: Change unaligned loads and stores with "t,A"
3631 operands to use "t,A(b)".
3633 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3635 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3637 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3639 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3640 until 3 instead of until 2.
3642 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3644 * Makefile.in (ALL_CFLAGS): Define.
3645 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3646 (MOSTLYCLEAN): Add config.log.
3647 (distclean): Don't remove config.log.
3648 * configure.in: Substitute HDEFINES.
3649 * configure: Rebuild.
3651 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3653 * sh-opc.h (sh_arg_type): Add F_FR0.
3654 (sh_table, case fmac): Add F_FR0 as first argument.
3656 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3658 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3660 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3662 * sparc-dis.c: Remove all references to NO_V9.
3664 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3666 * aclocal.m4: Just include ../bfd/aclocal.m4.
3667 * configure: Rebuild.
3669 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3671 * sparc-dis.c (X_DISP19): Define.
3672 (print_insn, case 'G'): Use it.
3673 (print_insn, case 'L'): Sign extend displacement.
3675 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3677 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3678 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3679 host_makefile_frag or frags.
3680 * aclocal.m4: New file.
3681 * configure: Rebuild.
3682 * Makefile.in (INSTALL): Set to @INSTALL@.
3683 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3684 (INSTALL_DATA): Set to @INSTALL_DATA@.
3686 (AR_FLAGS): Set to rc rather than qc.
3687 (CC): Define as @CC@.
3688 (CFLAGS): Set to @CFLAGS@.
3689 (@host_makefile_frag@): Remove.
3690 (config.status): Remove dependency upon @frags@.
3692 * configure.in: ../bfd/config.bfd now just sets shell variables.
3693 Use them rather than looking through target Makefile fragments.
3694 * configure: Rebuild.
3696 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3698 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3700 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3702 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3703 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3706 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3707 (lookup_{name,value}): New functions.
3708 (prefetch_table): New static local.
3709 (sparc_{encode,decode}_prefetch): New functions.
3710 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3712 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3714 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3717 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3719 * sh-dis.c: Correct comment on first line of file.
3721 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3723 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3725 * sparc-opc.c (asi, membar): New static locals.
3726 (sparc_{encode,decode}_{asi,membar}): New functions.
3727 (sparc_opcodes, membar insn): Fix.
3728 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3729 Support decoding of membar masks.
3732 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3734 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3736 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3738 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3739 and likewise for the other branches. Add bhs as an alias for bcc,
3740 and likewise for the size variants. Add dbhs as an alias for
3743 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3745 * sh-opc.h (FP sts instructions): Update to match reality.
3747 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3749 * m68k-dis.c: (fpcr_names): Add % before all register names.
3750 (reg_names): Likewise.
3751 (print_insn_arg): Don't explicitly print % before register names.
3752 Add % before register names in static array names. In case 'r',
3753 print data registers as `@(Dn)', not `Dn@'. When printing a
3754 memory address, don't print @# before it.
3755 (print_indexed): Change base_disp and outer_disp from int to
3756 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3757 syntax. Sign extend 8 byte displacement correctly.
3758 (print_base): Print using MIT syntax. Print zpc when appropriate.
3759 Change parameter disp from int to bfd_vma.
3761 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3764 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3766 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3767 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3768 * sh-opc.h (sh_arg_type): Add new operand types.
3769 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3771 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3773 * Makefile.in (distclean): Remove generated file config.h.
3775 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3777 * Makefile.in (distclean): Remove generated file config.h.
3779 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3781 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3783 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3785 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3786 rather than numopcodes. Use m68k_opcodes rather than removed
3787 opcode function. Don't check F_ALIAS.
3788 (print_insn_arg): Change first parameter to be const char *.
3789 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3790 (m68k-opc.o): New target.
3791 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3792 * configure: Rebuild.
3794 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3796 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3797 (opcode_bits, opcode_hash_table): New variables.
3798 (opcodes_initialized): Renamed from opcodes_sorted.
3799 (build_hash_table): New function.
3800 (is_delayed_branch): Use hash table.
3801 (print_insn): Renamed from print_insn_sparc, made static.
3802 Build and use hash table. If !sparc64, ignore sparc64 insns,
3803 and vice-versa if sparc64.
3804 (print_insn_sparc, print_insn_sparc64): New functions.
3805 (compare_opcodes): Move sparc64 opcodes to end.
3806 Print commutative insns with constant second.
3807 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3809 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3811 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3812 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3813 avoids printing a delay slot in a delay slot.
3814 * sh-opc.h (sh_table): Fully bracket last entry.
3816 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3818 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3820 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3822 * configure.in: Get host_makefile_frag from ${srcdir}.
3824 * configure.in: Autoconfiscated. Check for string[s].h. Create
3825 config.h from config.in. Don't set up sysdep.h link.
3826 * sysdep.h: New file.
3827 * configure, config.in: New files, generated from configure.in.
3828 * Makefile.in: Updated to be processed autoconf-style.
3829 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3830 (Makefile): Depend on config.status.
3831 (config.status): New rule.
3832 * configure.bat: Update Makefile substitutions.
3834 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3836 * mips-opc.c (L1): Define.
3837 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3838 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3841 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3843 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3844 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3845 have multiple add units but only a single logical unit.
3847 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3848 shifted by 18, without any insertion or extraction function.
3849 (insert_cr, extract_cr): Remove.
3851 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3853 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3856 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3858 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3859 * sh-opc.h: Add copyright.
3861 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3863 * Makefile.in (crunch-m68k): Delete extra target accidentally
3864 checked in a while ago.
3866 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3868 * sh-opc.h (sh_table): Add SH3 support.
3870 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3872 * sh-opc.h: Added bsrf and braf.
3874 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3876 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3877 bogus [ls]fm{ea,fd} patterns.
3879 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3880 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3881 initialize it from memory. Make function static.
3882 (print_insn_{big,little}_arm): New functions.
3883 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3884 the correct endianness.
3886 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3888 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3891 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3893 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3894 17th, so that it builds again using GCC as the compiler.
3896 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3898 * mips-dis.c (print_insn_little_mips): Cast return value from
3899 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3900 expects an unsigned long, and that might be fewer words of
3901 argument storage (e.g., if bfd_vma is long long on a 32-bit
3903 (print_insn_big_mips): Likewise with bfd_getb32 value.
3904 (_print_insn_mips): Now static.
3906 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3908 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3909 gcc memory hog problem with initializer is fixed.
3911 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3913 Merge in support for Mac MPW as a host.
3914 (Old change descriptions retained for informational value.)
3916 * mpw-config.in (archname): Compute from the config.
3917 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3919 * mpw-config.in (target_arch): Compute from canonical target.
3920 (m68k, mips, powerpc, sparc): Add architectures.
3921 * mpw-make.in (disassemble.c.o): Add.
3922 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3924 * mpw-config.in (BFD_MACHINES): Set to a default value.
3925 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3927 * mpw-make.in (CSEARCH): Add extra-include to search path.
3929 * mpw-config.in (varargs.h): Don't create.
3930 (sysdep.h): Create using forward-include.
3931 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3933 * mpw-config.in: New file, MPW version of configure.in.
3934 * mpw-make.in: New file, MPW version of Makefile.in.
3936 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3938 * alpha-dis.c (print_insn_alpha): Put empty statement after
3941 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3943 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3944 (low_sign_extend): Likewise.
3945 (get_field): Delete unused function.
3946 (set_field, deposit_14, deposit_21): Likewise.
3948 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3950 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3953 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3955 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3957 * alpha-opc.h (OSF_ASMCODE): define
3958 print pal-code names as defined in App C of the
3959 Alpha Architecture Reference Manual
3961 * alpha-dis.c: cleaned up output
3962 print stylized code forms as defined in App A.4.3 of the
3963 Alpha Architecture Reference Manual
3965 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3967 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3969 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3972 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3974 * m68k-dis.c (opcode): New function. Returns address of opcode
3975 table entry given index, even if the opcode table was split to
3976 work around gcc bugs.
3977 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3979 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3980 (reg_names): Now const.
3981 (print_insn_arg): Arrays cacheFieldName and names now const.
3982 (print_indexed): Array scales now const.
3984 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3986 * ppc-opc.c: Sort recently added instructions by minor opcode
3987 number within major opcode number.
3989 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3991 * hppa-dis.c: Include libhppa.h.
3993 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3995 * mips-opc.c: Change dli to use M_DLI, and add dla.
3997 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3999 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4001 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4003 * mips-opc.c: Add r4650 mul instruction.
4005 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4007 * mips-opc.c: Add uld and usd macros for unaligned double load and
4010 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4012 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4013 mfdcr, mtdcr, icbt, iccci.
4015 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4017 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4018 signed char fields to shorts, more portable.
4020 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4022 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4023 char fields as signed chars, since they may have negative values.
4025 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4027 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4028 (mycroft@netbsd.org).
4030 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4032 From "Logg, Ed" <elogg@ea.com>:
4033 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4034 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4037 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4039 * ppc-opc.c: Changes based on patch from David Edelsohn
4040 <edelsohn@mhpcc.edu>.
4041 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4044 (insert_tbr): New static function.
4045 (extract_tbr): New static function.
4046 (XFXFXM_MASK, XFXM): Define.
4047 (XSPRBAT_MASK, XSPRG_MASK): Define.
4048 (powerpc_opcodes): Add instructions to access special registers by
4049 name. Add mtcr and mftbu.
4051 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4053 * mips-opc.c (P3): Define.
4054 (mips_opcodes): Add mad and madu.
4056 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4058 * configure.in: Add W65 support.
4059 * disassemble.c: Likewise.
4060 * w65-opc.h, w65-dis.c: New files.
4062 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4064 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4067 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4069 * mips-opc.c: Add dli as a synonym for li.
4071 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4073 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4074 print something for reserved opcode values, even if it won't
4077 * mips-dis.c (_print_insn_mips): When initializing, shift right
4078 and mask, to avoid sign extension problems on the Alpha.
4080 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4083 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4085 * sh-opc.h (mov.l gbr): Get direction right.
4086 * sh-dis.c (print_insn_shx): New function.
4087 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4088 print opcodes with right byte order.
4090 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4092 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4093 to avoid conflicts with getopt.
4095 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4097 * hppa-dis.c (print_insn_hppa): Read the instruction using
4098 bfd_getb32, so that it works on a little endian or 64 bit host.
4099 Remove unused local variable op.
4101 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4103 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4104 addu does not work correctly if -mips3.
4106 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4108 * a29k-dis.c (print_special): Add special register names defined
4109 on 29030, 29040 and 29050.
4110 (print_insn): Handle new operand type 'I'.
4112 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4114 * Makefile.in (INSTALL): Use top level install.sh script.
4116 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4118 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4119 that it works on a little endian host.
4121 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4123 * configure.in: Use ${config_shell} when running config.bfd.
4125 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4127 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4129 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4131 * a29k-dis.c (print_insn): Print the opcode.
4133 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4135 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4137 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4139 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4141 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4143 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4144 which store a value into memory.
4146 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4148 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4149 * arm-dis.c, arm-opc.h: New files.
4151 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4153 * Makefile.in (ns32k-dis.o): Add dependency.
4154 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4155 string, not as array of chars.
4157 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4159 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4161 * sparc-opc.c: Added sparclite extended FP operations, and
4162 versions of v9 impdep* instructions permitting specification of
4165 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4167 * i960-dis.c (reg_names): Now const.
4168 (struct sparse_tabent): New type, copied from array type in mem
4170 (ctrl): Local static array ctrl_tab now const.
4171 (cobr): Local static array cobr_tab now const.
4172 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4173 static variable mem_tab no longer explicitly initialized. Changed
4174 mem_init to const array of struct sparse_tabent.
4175 (reg): Local static variable reg_tab no longer explicitly
4176 initialized. Changed reg_init to const array of struct
4178 (ea): Local static array scale_tab now const.
4180 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4183 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4185 * configure.bat: the disassember needs to be enabled for
4186 "objdump -d" to work in djgpp.
4188 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4190 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4191 (invalid_float): Enabled general version, doesn't require running
4192 on ns32k host. Changed to take char* argument, and test for
4193 explicitly specified sizes, instead of using sizeof() on host CPU
4195 (INVALID_FLOAT): Cast first argument.
4196 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4197 list_P032, list_M032): Now const.
4198 (optlist, list_search): Made appropriate arguments now point to
4200 (print_insn_arg): Changed static array of one-character-string
4201 pointers into a static const array of characters; fixed sprintf
4202 statement accordingly.
4204 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4206 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4207 from distribution. A ns32k-dis.c from a previous distribution has
4208 been brought up to date and supports the new interface.
4210 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4212 * configure.in: add bfd_ns32k_arch target support.
4214 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4215 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4217 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4219 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4222 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4224 * h8300-dis.c, mips-dis.c: Don't use true and false.
4226 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4228 * configure.in: Change --with-targets to --enable-targets.
4230 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4232 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4233 opcodes to the first instruction with that opcode, to speed
4234 disassembly of large files. From ralphc@pyramid.com (Ralph
4237 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4239 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4241 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4243 * configure.bat: update to latest makefile.in
4245 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4247 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4248 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4249 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4250 slot insn is in a delay slot.
4251 * z8k-opc.h: (resflg): Fix patterns.
4252 * h8500-opc.h Fix CR insn patterns.
4254 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4256 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4257 "cmpl" before POWER versions, so that gas -many uses them.
4259 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4261 * disassemble.c: New file.
4262 * Makefile.in (OFILES): Add disassemble.o.
4263 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4264 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4265 binutils/configure.in.
4267 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4268 opcode being examined.
4270 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4272 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4273 (insert_ral, insert_ram, insert_ras): New functions.
4274 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4275 RAS for store with update.
4277 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4279 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4280 (edelsohn@npac.syr.edu).
4282 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4284 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4287 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4289 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4291 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4293 * ppc-opc.c (powerpc_operands): The signedp field has been
4294 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4295 instead. Add new operand SISIGNOPT.
4296 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4297 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4298 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4301 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4303 * i386-dis.c (struct private): Renamed to dis_private. `private'
4304 is a reserved word for dynix cc.
4306 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4308 * configure.in: Change error message to refer to bfd/config.bfd
4309 rather than bfd/configure.in.
4311 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4313 * ppc-opc.c: Define POWER2 as short alias flag.
4314 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4317 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4319 * i960-dis.c (print_insn_i960): Don't read a second word for
4320 opcodes 0, 1, 2 and 3.
4322 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4324 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4326 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4328 * m68881-ext.c: Removed; no longer used.
4329 * Makefile.in: Changed accordingly.
4331 * m68k-dis.c (ext_format_68881): Don't declare.
4332 (print_insn_m68k): If an instruction uses place 'i', it uses at
4333 least four fixed bytes.
4334 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4335 extended float, convert to double using floatformat_to_double, not
4336 ieee_extended_to_double, and fetch the data before converting it.
4338 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4340 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4341 davidj@ICSI.Berkeley.EDU (David Johnson).
4343 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4345 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4346 PowerPC uses bdnz[l][a].
4348 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4350 * dis-buf.c, i386-dis.c: Include sysdep.h.
4352 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4354 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4356 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4357 by Motorola PowerPC 601 with PPC_OPCODE_601.
4358 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4359 Disassemble Motorola PowerPC 601 instructions as well as normal
4360 PowerPC instructions.
4362 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4364 * i960-dis.c (reg, mem): Just use a static array instead of
4367 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4369 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4370 condition name index if this is for a negated condition.
4372 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4373 Floating point format for 'H' operand is backwards from normal
4374 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4375 operands (fmpyadd and fmpysub), handle bizarre register
4376 translation correctly for single precision format.
4378 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4379 or 'I' operands if the next format specifier is 'M' (fcmp
4380 condition completer).
4382 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4384 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4385 single number giving a bitmask for the MB and ME fields of an M
4386 form instruction. Change NB to accept 32, and turn it into 0;
4387 also turn 0 into 32 when disassembling. Seperated SH from NB.
4388 (insert_mbe, extract_mbe): New functions.
4389 (insert_nb, extract_nb): New functions.
4390 (SC_MASK): Mask out SA and LK bits.
4391 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4392 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4393 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4394 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4395 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4396 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4397 (powerpc_macros): Define table of macro definitions.
4398 (powerpc_num_macros): Define.
4400 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4401 if PPC_OPERAND_NEXT is set.
4403 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4405 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4406 char. Retrieve contents using bfd_getl32 instead of shifting.
4408 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4410 * ppc-opc.c: New file. Opcode table for PowerPC, including
4411 opcodes for POWER (RS/6000).
4412 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4413 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4414 (CFILES): Add ppc-dis.c.
4415 (ppc-dis.o, ppc-opc.o): New targets.
4416 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4418 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4420 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4421 No space before 'u', 'f', or 'N'.
4423 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4425 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4426 farther than we should.
4428 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4430 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4432 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4434 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4436 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4437 needs it, to prevent reading past the end of a section.
4439 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4441 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4442 Removed t,A case for la; always use t,A(b) case.
4444 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4446 From Ted Lemen <mellon@pepper.ncd.com>
4447 * mips-dis.c (print_insn_arg): Handle 'k'.
4448 * mips-opc.c: Make cache use k, not t.
4450 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4452 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4453 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4454 FLOAT_FORMAT_CODE to put out floating point register names.
4456 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4458 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4460 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4462 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4464 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4466 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4467 larger than 32. Moved dsxx32 variants first for disassembler.
4469 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4471 * z8kgen.c, z8k-opc.h: Add full lda information.
4473 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4475 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4476 movb instructions. Any necessary space will be emitted by
4477 the code to handle nullification completers.
4479 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4481 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4483 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4485 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4486 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4488 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4490 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4492 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4494 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4495 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4497 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4499 * m88k-dis.c (m88kdis): comment change. Remove space after
4501 (printop): handle new arg types DEC and XREG for m88110.
4503 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4505 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4506 type for absolute branch addresses. Delete special
4507 "ble" and "be" code in 'W' operand code.
4509 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4511 * mips-opc.c: Set hazard information correctly for branch
4512 likely instructions.
4514 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4516 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4517 info->fprintf_func for printing and info->print_address_func for
4520 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4522 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4524 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4526 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4527 Corrected second case of "b" for disassembler.
4529 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4532 to BFD swapping routines to correspond to BFD name changes.
4534 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4536 * mips-opc.c: Change div machine instruction to be z,s,t rather
4537 than s,t. Change div macro to be d,v,t rather than d,s,t.
4538 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4539 rem and remu which generates only the corresponding div
4540 instruction. This is for compatibility with the MIPS assembler,
4541 which only generates the simple machine instruction when an
4542 explicit destination of $0 is used.
4543 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4545 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4547 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4548 WR_31 hazard for bal, bgezal, bltzal.
4550 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4552 * hppa-dis.c (print_insn_hppa): Use print function
4553 from within the disassemble_info, not fprintf_filtered.
4555 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4557 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4558 Law, law@cs.utah.edu.)
4560 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4562 * mips-opc.c ("absu"): Removed.
4565 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4568 Changed hazard information to distinguish between memory load
4569 delays and coprocessor load delays.
4571 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4573 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4575 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4577 * configure.in: Don't pass cpu to config.bfd.
4579 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * m88k-dis.c (m88kdis): Make class unsigned.
4583 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4585 * alpha-dis.c (print_insn_alpha): One branch format case was
4586 missing the instruction name.
4588 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4590 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4591 Add the arch-specific auxiliary files.
4592 (OFILES): Remove the arch-specific auxiliary files
4593 and use BFD_MACHINES instead of DIS_LIBS.
4594 * configure.in: Set BFD_MACHINES based on --with-targets option.
4596 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4598 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4601 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4603 * sparc-opc.c: Change CONST to const to deal with gcc
4604 -Dconst=__const -traditional.
4606 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4609 coprocessor instructions out of #if 0, and made them use new
4612 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4614 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4616 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4618 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4619 instruction, for use by the disassembler.
4621 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4622 hand-coded sign extensions that depended on 32-bit host ints.
4623 FIXME, we still depend on big-endian host bitfield ordering.
4624 (sparc_print_insn): Set the insn_info_valid field, and the
4625 other fields that describe the instruction being printed.
4627 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4629 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4630 `jmp' instead of just one of them.
4632 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4634 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4635 (fput_fp_reg_r): Renamed from fput_reg_r.
4636 (fput_fp_reg): New function.
4637 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4639 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4641 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4643 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4645 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4647 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4648 don't output a space.
4650 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4652 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4654 * mips-opc.c: New file, containing opcode table from
4655 ../include/opcode/mips.h.
4656 * Makefile.in: Add it.
4658 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4660 * m88k-dis.c: New file, moved in from gdb and changed to use the
4661 new dis-asm.h disassembler interface.
4662 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4663 (m88k-dis.o): New target.
4665 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4667 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4668 argument string const char * to correspond to opcode/mips.h.
4670 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4672 * mips-dis.c: Updated to account for name changes in new version
4674 * Makefile.in: Added header file dependencies.
4676 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4678 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4680 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4682 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4683 extend, rather than shifts.
4685 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4687 * Makefile.in: Undo 15 June change.
4689 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4691 * m68k-dis.c (print_insn_arg): Change return value to byte count
4693 * m68k-dis.c: Re-write to detect invalid operands before
4694 printing anything, so we can handle this the same way we
4695 handle invalid opcodes.
4697 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4699 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4701 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4703 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4706 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4708 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4710 * configure.in: Do make sysdep.h link.
4711 * Makefile.in: Search ../include. Don't search ../bfd.
4713 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4715 Changes from Jeff Law, law@cs.utah.edu:
4716 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4717 Do not print a space before the completers specified by
4720 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4722 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4723 defined, since gdb has been fixed.
4725 Changes from Jeff Law, law@cs.utah.edu:
4726 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4727 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4728 be a *disassemble_info, not a *FILE.
4729 * hppa-dis.c: Support 'd', '!', and 'a'.
4730 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4731 * hppa-dis.c: Delete cases which are no longer needed.
4733 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4735 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4737 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4739 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4742 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4744 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4745 * configure.in: No longer need to configure to get sysdep.h.
4747 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4749 * Patches from Jeffrey Law <law@cs.utah.edu>.
4750 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4751 templates for 1.1 FP computational instructions.
4753 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4755 * h8500-dis.c (print_insn_h8500): Address argument is type
4757 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4760 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4761 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4763 * sparc-dis.c (compare_opcodes): Move static declaration to
4766 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4768 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4769 instruction, remove unimp hack from 'l' argument.
4771 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4773 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4776 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4778 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4779 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4782 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4784 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4785 arrays of string pointers to 2-d arrays of chars, to save
4788 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4790 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4791 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4793 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4795 * hppa-dis.c: New file from Utah, adapted to new disassembler
4797 * Makefile.in: Include it.
4799 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4801 * sh-dis.c, sh-opc.h: New files.
4803 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4805 * alpha-dis.c, alpha-opc.h: New files.
4807 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4809 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4812 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4814 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4816 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4818 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4821 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4823 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4824 and double percent signs a few places.
4826 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4828 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4829 Use info->print_address_func not print_address.
4831 * dis-buf.c (generic_print_address): New function.
4833 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4835 * Makefile.in: Add sparc-dis.c.
4836 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4838 Add `add' instruction to the set that get checked
4839 for a preceding `sethi' in order to print an absolute address.
4840 * (print_insn): Disassembly prefers real instructions.
4841 (is_delayed_branch): Speed up.
4842 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4843 Still missing some float ops, and needs testing.
4844 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4845 F_ALIAS. Use printf, not fprintf, when not passing a file
4847 (compare_opcodes): Check that identical instructions have
4848 identical opcodes, complain otherwise.
4851 * Include reg_names.
4853 Use dis-asm.h/read_memory_func interface.
4855 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4857 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4858 deliberately return non-zero to setjmp from longjmp. Otherwise
4859 this code fails to compile.
4861 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4863 * m68k-dis.c: Fix prototype for fetch_arg().
4865 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4867 * dis-buf.c: New file, for new read_memory_func interface.
4868 Makefile.in (OFILES): Include it.
4869 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4870 Use new read_memory_func interface.
4872 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4874 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4875 * h8500-opc.h: Fix couple of opcodes.
4877 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4879 * Makefile.in: add dvi & installcheck targets
4881 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4883 * Makefile.in: Update for h8500-dis.c.
4885 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4887 * h8500-dis.c, h8500-opc.h: New files
4889 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4891 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4892 ../include/dis-asm.h.
4893 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4894 and ../gdb/m68k-pinsn.c).
4895 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4896 and ../gdb/i386-pinsn.c).
4897 * m68881-ext.c: New file. Moved definition of
4898 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4899 * Makefile.in: Adjust for new files.
4900 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4901 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4902 can be dis-assembled.
4904 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4906 * mips-dis.c (print_insn_arg): Now returns void.
4908 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4910 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4911 files that use the macros.
4913 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4915 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4916 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4917 (CFILES): Added mips-dis.c.
4919 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4921 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4922 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4924 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4926 * Makefile.in: Improve *clean rules.
4927 * configure.in: Allow a default host.
4929 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4931 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4932 files include other sysdep files
4934 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4936 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4938 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4940 * configure.in: For host support, use ../bfd/configure.host
4941 so it stays in sync with the ../bfd/hosts database.
4943 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4945 * configure.in: use cpu-vendor-os triple instead of nested cases
4947 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4949 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4950 *always* the wrong one.
4952 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4954 * z8kgen.c: added copyright info
4956 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4958 * z8k-dis.c (unparse_instr): prettier tabs
4959 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4961 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4963 * configure.in: Add ncr* configuration.
4964 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4965 picayune ANSI compilers happy.
4967 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4969 * configure.in (i386): Make i386 and i486 synonymous for now.
4970 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4972 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4974 * Makefile.in (install): Fix typo.
4976 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4978 * Makefile.in (make): Remove obsolete crud.
4979 (sparc-opc.o): Avoid Sun Make VPATH bug.
4981 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4983 * Makefile.in: since there are no SUBDIRS, remove rule and
4984 references of subdir_do.
4986 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4988 * Makefile.in (install): Get the library name right here too.
4989 Don't install bfd.h, since it's unrelated to this library. No
4990 subdirs to recurse into, either.
4991 (CFILES): The source file has a .c suffix, not .o.
4993 * sparc-opc.c: New file, moved from BFD.
4994 * Makefile.in (OFILES): Build it.
4996 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4998 * z8k-dis.c: fixed forward refferences of some declarations.
5000 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5002 * Makefile.in: get the name of the library right
5004 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5006 * z8k-dis.c: knows how to disassemble z8k stuff
5007 * z8k-opc.h: new file full of z8000 opcodes
5011 version-control: never