2 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-opc.c,fr30-opc.h: Regenerated.
7 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
9 * m32r-opc.c: Regenerate.
12 Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
14 * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
15 * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
16 (extract_ffstreg): Fix calculation of reg part of returned value.
18 Thu Nov 19 16:38:16 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
20 * mips-opc.c (sync*): Flag these instructions with INSN_SYNC.
22 Wed Jul 29 09:41:19 1998 Frank Ch. Eigler <fche@cygnus.com>
24 * dvp-opc.c (vu_lower_opcodes): Allow ISW, ISWR, MFIR instructions
25 to take multiple destination (xyzw) flags.
27 Thu Jul 23 18:26:49 1998 Frank Ch. Eigler <fche@cygnus.com>
29 * dvp-opc.c (vu_operands): Add UW operand type to force ".w" suffix
30 on ft operand of CLIP.
31 (insert_w): New function for same.
32 (vu_opcodes): Use "broadcast" style argument list for two-operand
33 CLIP insn. Call UW constraint above.
35 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
37 * dvp-dis.c (print_insn): Disassemble DVP_OPERAND_RELOC_11_S4 as
41 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
43 * dis-buf.c (generic_strcat_address): reformat to GNU coding
44 conventions. change sprintf call to an sprintf_vma call.
47 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
49 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
52 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
54 The following changes were made by
55 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
56 David Taylor <taylor@texas.cygnus.com>, and
57 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
58 merge in changes by HP; HP did not create ChangeLog entries.
60 * dis-buf.c (generic_strcat_address): new function.
62 * hppa-dis.c: Changes to improve hppa disassembly.
63 Changed formatting in : reg_names, fp_reg_names,control_reg,
64 New variables : sign_extension_names, deposit_names, conversion_names
65 float_test_names, compare_cond_names_double, add_cond_names_double,
66 logical_cond_names_double, unit_cond_names_double,
67 branch_push_pop_names, saturation_names, shift_names, mix_names,
68 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
69 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
70 (fput_const): renamed as fput_hex_const
72 - use the macros fputs_filtered and
73 fput_decimal_const whenever possible; calls to sign_extend require
74 2 params -- add a missing second param of 0.
75 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
76 architecture version number of current machine. HP folks are
77 trying to handle situation where the target program was compiled
78 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
80 - added new cases : 'g', 'B', 'm'
81 - added cases specifically for PA 2.0
82 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
83 - calls to fput_const become calls to fput_hex_const
85 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
87 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
88 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
90 (CLEANFILES): Add stamp-i960.
92 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
95 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
96 * Makefile.in: Rebuilt.
97 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
99 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
100 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
103 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
105 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
108 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
110 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
112 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
113 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
116 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
118 * fr30-opc.c: Regenerate.
120 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
122 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
124 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
126 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
128 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
130 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
133 1998-11-30 Doug Evans <devans@casey.cygnus.com>
135 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
136 CGEN_INSN_BASE_VALUE.
137 start-sanitize-cygnus
138 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
139 New args word_offset, word_length. Rewrite.
141 (insert_1): Fix lsb0 case.
142 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
143 New args word_offset, word_length. Rewrite.
145 (extract_1): Fix lsb0 case.
146 * cgen-opc.in (FLD): Define.
148 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
150 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
153 start-sanitize-cygnus
154 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
156 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
157 * Makefile.in: Rebuild.
161 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
163 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
165 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
167 * fr30-asm.c,fr30-dis.c: Regenerated.
169 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
171 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
173 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
175 * fr30-opc.c: Regenerated.
177 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
179 * fr30-opc.c: Regenerated.
180 * fr30-opc.h: Regenerated.
181 * fr30-dis.c: Regenerated.
182 * fr30-asm.c: Regenerated.
185 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
187 * mips-opc.c (sync.p,sync.l): Swap insn values.
190 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
192 * fr30-opc.c: Regenerate.
194 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
196 * fr30-opc.c: Regenerated.
197 * fr30-opc.h: Regenerated.
200 1998-11-18 Doug Evans <devans@casey.cygnus.com>
202 start-sanitize-cygnus
203 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
204 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
206 (insert_insn_normal): Fix typo.
207 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
208 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
209 Rewrite ! CGEN_INT_INSN_P case.
210 (extract_insn_normal): Ditto.
211 (extract_1): New arg `pc'. All callers updated.
212 Replace calls to bfd_getb8.
213 (fill_cache): New fn.
214 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
215 * cgen-opc.in: ... from here.
216 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
218 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
220 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
224 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
226 * fr30-opc.c: Regenerated.
228 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
230 * fr30-opc.c: Regenerated.
231 * fr30-opc.h: Regenerated.
232 * fr30-dis.c: Regenerated.
233 * fr30-asm.c: Regenerated.
235 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
237 * po/opcodes.pot: Regenerated.
238 * fr30-opc.c: Regenerated.
239 * fr30-opc.h: Regenerated.
240 * fr30-dis.c: Regenerated.
241 * fr30-asm.c: Regenerated.
243 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
245 * disassemble.c (disassembler): Add support for FR30 target.
248 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
250 start-sanitize-cygnus
251 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
252 CGEN_OPERAND_SEM_ONLY.
254 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
256 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
258 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
260 * po/opcodes.pot: Regenerate.
261 * po/POTFILES.in: Regenerate.
262 * fr30-opc.c: Regenerate.
263 * fr30-opc.h: Regenerate.
265 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
267 * m32r-asm.c: Regenerate.
270 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
272 * configure.in: Added case for bfd_fr30_arch.
273 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
274 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
275 (CLEANFILES): Added stamp-fr30.
277 * fr30-asm.c: New file.
278 * fr30-dis.c: New file.
279 * fr30-opc.c: New file.
280 * fr30-opc.h: New file.
281 * po/POTFILES.in: Regenerated
282 * po/opcodes.pot: Regenerated
286 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
288 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
289 to bcl8,bncl8 entries.
290 (macro_insn_table_entries): Add FILL_SLOT attribute
291 to bcl8r,bncl8r entries.
294 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
296 * configure.in: detect cygwin* instead of cygwin32*
297 * configure: regenerate
299 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
301 * mips-opc.c (IS_M): Added.
304 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
306 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
310 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
312 start-sanitize-cygnus
313 * cgen-asm.in (insert_1): New function.
314 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
315 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
316 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
317 * cgen-dis.in (extract_1): New function.
318 (extract_normal): buf_ctrl renamed to ex_info, update type.
319 Progress on handling of CGEN_INT_INSN_P.
320 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
321 Update handling of CGEN_INT_INSN_P. Handle errors from
322 @arch@_cgen_extract_operand.
323 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
324 (default_print_insn): Renamed from print_insn.
325 Handle ! CGEN_INT_INSN_P.
326 (print_insn_@arch@): Handle error returns from print_insn.
327 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
328 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
329 (@arch@_cgen_lookup_get_insn_operands): Ditto.
331 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
334 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
336 * m10300-opc.c: Allow autoincrement stores using the same register
337 for source and destination operands.
339 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
341 * m10300-opc.c: DSP instrutions which only write to one general
342 register have no restrictions on matching operands.
344 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
347 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
349 * m32r-opc.h,m32r-opc.c: Regenerate.
352 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
354 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
357 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
359 * i386-dis.c (OP_3DNowSuffix): New static function.
362 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
363 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
364 (insn_codep): New static variable.
365 (print_insn_x86): Init insn_codep after prefixes.
366 (grps): Add GRP14 entries for prefetch, prefetchw.
369 From Jeff B Epler <jepler@usgs.gov>
370 * i386-dis.c (Suffix3DNow): New table.
372 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
374 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
376 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
378 * d10v-dis.c (print_operand): If num is nonzero, then
379 add OPERAND_ACC1, not OPERAND_ACC0.
381 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
383 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
386 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
388 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
392 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
394 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
397 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
399 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
401 start-sanitize-nortel-ppc750
402 1998-09-09 Michael Meissner <meissner@cygnus.com>
404 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
407 end-sanitize-nortel-ppc750
408 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
410 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
412 (print_insn_little_arm): Detect Thumb symbols in elf object
415 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
417 * alpha-dis.c (print_insn_alpha): Use the machine type to
418 decide which PALcode set to include.
420 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
422 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
424 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
426 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
427 MSUB and MSUBS instructions.
430 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
432 * mips-opc.c: Insert contents of vu0.h, rather than including it.
434 * Makefile.am: Rebuild dependencies.
438 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
440 * ppc-opc.c (powerpc_operands): Omit parens around additions in
443 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
445 start-sanitize-coldfire
446 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
447 ColdFire, as below for mulsl and mulul.
449 end-sanitize-coldfire
450 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
451 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
452 +, -, and d for ColdFire.
454 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
455 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
456 (extract_mbe): Likewise.
458 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
460 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
462 * m10300-opc.c: First cut at UDF instructions.
464 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
466 * m32r-opc.c: Regenerate (remove semantic descriptions).
468 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
470 * arm-dis.c (print_insn_big_arm): Fix indentation.
471 (print_insn_little_arm): Likewise.
473 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
475 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
477 (print_insn_little_arm): Likewise.
479 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
481 Move all global state data into opcode table struct, and treat
482 opcode table as something that is "opened/closed".
483 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
484 (cgen_asm_init): Delete.
485 (cgen_set_parse_operand_fn): New function.
486 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
487 (cgen_dis_init): Delete.
488 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
489 (cgen_current_{opcode_table_mach,endian}): Delete.
490 start-sanitize-cygnus
491 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
492 * cgen-dis.in (all fns): Ditto.
493 * cgen-opc.in (all fns): Ditto.
495 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
497 start-sanitize-cygnus
498 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
500 * cgen-dis.in (print_normal): Split into two.
501 (print_address): New function.
502 (extract_insn_normal): Clarify insn_value arg.
503 (print_int_insn): Renamed from print_insn.
504 (print_insn): New arg.
505 (print_insn_@arch@): Open opcode table if not already done so.
506 Move reading of insn into print_insn.
509 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
511 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
515 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
517 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
518 accept an accumulator choice.
519 * m32r-opc.c,m32r-opc.h: Regenerate.
522 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
524 * m10300-opc.c: Add entries for "no_match_operands" field in
528 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
530 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
534 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
536 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
539 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
541 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
543 * m10300-opc.c: Add autoincrement memory loads/stores.
547 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
549 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
550 phmsubh respectively.
553 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
555 start-sanitize-cygnus
556 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
558 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
559 @arch_cgen_get_int_operand.
560 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
561 Update call to @arch@_cgen_insert_operand.
562 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
563 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
564 (extract_insn_normal): New arg `pc', callers updated.
565 Update call to @arch@_cgen_extract_operand.
566 (print_insn): Update call to CGEN_EXTRACT_FN.
568 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
571 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
573 * m10300-opc.c: Fix load to sp and store from sp for the am33.
574 Add more multimedia instructions.
576 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
578 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
583 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
585 * mips-opc.c (pref): Enabled for the r5900.
588 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
590 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
592 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
594 (OP_J): Remove unnecessary subtraction when 16-bit displacement
595 will be masked later.
598 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
600 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
603 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
605 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
606 from raw register #s to symbolic names to make debugging easier.
609 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
611 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
613 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
615 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
616 start-sanitize-cygnus
617 * Makefile.am (CGENDIR): Set via configure.
618 (CGEN): New variable.
619 (CGENFILES): object.scm renamed to cos.scm.
620 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
621 (stamp-m32r): Pass prefix to run-cgen.
622 * Makefile.in: Regenerate.
623 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
624 * cgen-dis.in: Ditto.
625 * cgen-opc.in: Ditto.
626 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
627 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
628 * configure: Regenerate.
632 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
634 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
636 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
638 * m10300-opc.c: Reorder more instructions so that we do not
639 accidentally match a mn10300 instruction when we really
640 wanted an am33 instruction.
643 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
645 * m10300-dis.c: Only recognize instructions from the currently
647 * m10300-opc.c: Add field indicating the particular variant of
648 the mn10300 each instruction is available on.
650 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
652 * configure.in: For bfd_vax_arch, build vax-dis.lo.
653 * Makefile.am: Rebuild dependencies.
654 (CFILES): Add vax-dis.c.
655 (ALL_MACHINES): Add vax-dis.lo.
656 * aclocal.m4: Rebuild with current libtool.
657 * configure, Makefile.in: Rebuild.
659 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
661 * vax-dis.c: New file, from work by Pauline Middelink
662 <middelin@polyware.iaf.nl>.
663 * disassemble.c (ARCH_vax): Define if ARCH_all.
664 (disassembler): Add case for ARCH_vax.
665 * makefile.vms: Support compilation on vms/vax.
668 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
670 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
671 the DVP_OPERAND_RELOC_11_S4 relocation.
675 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
677 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
679 (disassemble): Correctly handle FMT_D10 instructions.
681 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
682 am33 shift instructions.
684 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
686 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
687 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
689 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
690 (mn10300_opcodes): Reorder so as to try and select opcodes from
691 the core chip when multiple alternatives exist. Change several
692 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
693 "macbu" instructions. Fix typos in a couple DSP instructions too.
696 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
698 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
699 related to sign extension and the size of ints.
701 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
703 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
704 instructions. Support (sp) addressing mode by expanding it into
708 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
710 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
711 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
712 be used as immediate values.
716 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
718 * m10300-opc.c: Support 4 byte DSP instructions.
721 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
723 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
726 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
728 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
731 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
733 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
736 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
738 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
739 found on the mn10300.
742 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
744 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
747 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
749 * mips-dis.c (print_insn_little_mips): Previously, instruction
750 printing references the symbol table to determine whether the
751 instruction resides in a block regular instructions or mips16
752 instructions. However, when the disassembler gets used in other
753 environments where the symbol table is not present, we no longer
754 rely in the symbol table, rather, use the low bit of the
755 instructions address to guess. There should be no change for usage
756 of the disassembler in host based programs, gdb, objdump.
757 (print_insn_big_mips): ditto.
758 (print_insn_mips): ditto
760 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
762 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
764 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
767 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
768 operands for the am33.
769 (mn10300_opcodes): Add new instructions from the am33.
771 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
773 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
775 * i386-dis.c (index16): Add '%' to register names. Use ','
778 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
780 * i386-dis.c: Don't print opcode suffix when we can figure out the
781 size (and gas can!) by register operands, or from the default
783 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
785 (dis386, dis386_twobyte, grps): Use new suffix macros.
786 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
787 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
788 order of cmps operands to agree with Intel docs. Correct operand
789 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
790 agree with Intel docs.
791 (print_insn_x86): Print orphan fwait before other prefixes.
792 Return correct byte count for orphan fwait with prefixes. Don't
793 print `bound' operands in reverse order.
794 (ckprefix): Stop accumulating prefixes if we get fwait.
795 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
797 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
799 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
800 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
802 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
804 Fix problems when bfd_vma is wider than long.
805 * i386-dis.c: Make op_address and start_pc unsigned.
806 (set_op): Make parameter unsigned.
807 (print_insn_x86): Cast to bfd_vma when passing a value to
809 * ns32k-dis.c (CORE_ADDR): Don't define.
810 (print_insn_ns32k): Change type of addr to bfd_vma. Use
811 bfd_scan_vma to read back address.
812 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
814 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
815 (NEXTULONG): New definition.
816 (print_insn_m68k): Avoid overflow when computing third argument of
818 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
819 Use disp instead of val to store offset values.
820 (print_indexed): Use base_disp instead of word to store base
821 displacement, to avoid overflow.
822 * m10300-dis.c (disassemble): Cast value to long when computing
823 pc-relative address, to get correct sign extension.
825 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
827 * m32r-opc.c: Regenerate.
829 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
831 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
832 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
834 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
836 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
838 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
840 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
842 (OP_DSreg): Rename from OP_DSSI.
843 (OP_ESreg): Rename from OP_ESDI.
844 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
846 (append_seg): Rename from append_prefix.
847 (ptr_reg): New function.
848 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
850 (PREFIX_ADDR): Rename from PREFIX_ADR.
851 (float_reg): Add non-broken opcodes for people who don't want
854 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
856 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
859 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
861 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
863 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
865 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
866 0; produce error message for shifts of size 32 (or 64 for 64-bit
867 shifts), because the hardware doesn't support them.
870 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
872 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
875 * vu0.h (sqc2): Fix opcode.
877 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
881 start-sanitize-cygnus
882 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
884 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
885 Change pinfo to use WR_HILO.
888 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
890 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
891 LONG_2, LONG_2b formats to use this new operand.
893 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
895 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
897 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
899 * sparc-dis.c (print_insn_sparc): big endian instruction / little
902 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
904 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
905 and SHORT_B3b formats to use Rb instead of Ra.
907 Add FLAG_MUL16 to MUL2XH opcode.
909 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
910 to existing 1.1.1 parallelisation prohibition procedure.
912 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
914 start-sanitize-cygnus
915 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
916 * cgen-dis.in (extract_normal): Likewise.
918 * m32r-asm.c,m32r-dis.c: Regenerate.
921 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
923 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
927 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
929 * mips-opc.c (multu1): Add two operand variant for the r5900.
932 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
934 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
935 with a shift count of 0.
938 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
940 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
942 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
944 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
945 (_print_insn_mips): Likewise.
946 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
950 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
952 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
953 (cgen_hw_lookup_by_num): New function.
956 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
959 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
961 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
963 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
965 * sparc-dis.c (print_insn_sparc): Always fetch instructions
966 as big-endian on SPARClite.
969 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
971 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
973 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
977 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
979 * d30v-opc.c (pre_defined_register): Remove alias for r0.
982 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
984 * mips-opc.c (break): Added 20-bit single-operand break
985 instruction for R5900 only.
988 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
990 * po/Make-in (install-info): New target.
992 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
994 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
995 * configure: Rebuild.
997 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
999 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1000 variety of ISA2 instructions to set bottom ten bits of trap code.
1002 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1004 * Makefile.am (config.status): Add explicit target so that
1005 config.status depends upon bfd/configure.in.
1006 * Makefile.in: Rebuild.
1008 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1010 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1011 instructions to set bottom ten bits of break code.
1012 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1013 for above optional argument.
1015 start-sanitize-cygnus
1016 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
1018 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
1019 * m32r-opc.h: Regenerate.
1022 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1024 * makefile.vms: Run dec c with /nodebug.
1026 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1028 * Makefile.in: Rebuilt.
1029 * Makefile.am: Regenerated dependencies with mkdep.
1031 * opintl.h (_): Define as dgettext.
1033 start-sanitize-cygnus
1034 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
1036 * configure.in: Add support for --enable-cgen-maint.
1037 * Makefile.am (M32R_DEPS): New variable.
1038 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
1039 * aclocal.m4: Regenerate.
1040 * Makefile.in: Regenerate.
1041 * configure: Regenerate.
1043 * Makefile.am (CGENFILES): Add minsn.scm.
1046 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1048 * cgen-asm.c: Internationalised.
1049 start-sanitize-cygnus
1050 * cgen-asm.in: Internationalised.
1051 * cgen-opc.in: Internationalised.
1053 * m32r-asm.c: Internationalised.
1054 * m32r-dis.c: Internationalised.
1055 * m32r-opc.c: Internationalised.
1057 * aclocal.m4: Regenerated.
1058 * configure: Regenerated.
1059 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1060 * Makefile.in: Rebuild.
1061 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1062 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1064 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1066 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1068 * aclocal.m4, configure: Rebuild with current tools.
1070 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1072 * opintl.h: New file - contains internationalisation macros used
1073 by source files in this directory.
1074 * po/: New subdirectory - contains internationalisation files.
1075 * po/Make-in: New file - Makefile constructor.
1076 * po/POTFILES.in: New file - list of files in opcodes directory
1077 that should be scan for internationalisation macros.
1078 * po/opcodes.pot: New file - list of internationisation strings
1079 found in files mentioned in po/POTFILES.in.
1080 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1081 entry. Add intl directory to include paths.
1082 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1083 HAVE_STRCPY, HAVE_LC_MESSAGES
1084 * configure.in: Add rule to build Makefile in po subdirectory.
1085 * Makefile.in: Rebuilt.
1086 * aclocal.m4: Rebuilt.
1087 * config.in: Rebuilt.
1088 * configure: Rebuilt.
1089 * alpha-opc.c: Internationalised.
1090 * arc-dis.c: Internationalised.
1091 * arc-opc.c: Internationalised.
1092 * arm-dis.c: Internationalised.
1093 * cgen-asm.c: Internationalised.
1094 * d30v-dis.c: Internationalised.
1095 * dis-buf.c: Internationalised.
1097 * dvp-dis.c: Internationalised.
1098 * dvp-opc.c: Internationalised.
1100 * h8300-dis.c: Internationalised.
1101 * h8500-dis.c: Internationalised.
1102 * i386-dis.c: Internationalised.
1103 * m10200-dis.c: Internationalised.
1104 * m10300-dis.c: Internationalised.
1105 * m68k-dis.c: Internationalised.
1106 * m88k-dis.c: Internationalised.
1107 * mips-dis.c: Internationalised.
1108 * ns32k-dis.c: Internationalised.
1109 * opintl.h: Internationalised.
1110 * ppc-opc.c: Internationalised.
1111 * sparc-dis.c: Internationalised.
1112 * v850-dis.c: Internationalised.
1113 * v850-opc.c: Internationalised.
1115 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1117 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1118 (asm_hash_table_entries): New variable.
1119 (cgen_asm_init): Free asm_hash_table_entries.
1120 (hash_insn_array,hash_insn_list): New functions.
1121 (build_asm_hash_table): Use them. Hash macro insns as well.
1122 (cgen_asm_lookup_insn): Update.
1123 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1124 (dis_hash_table_entries): New variable.
1125 (cgen_dis_init): Free dis_hash_table_entries.
1126 (hash_insn_array,hash_insn_list): New functions.
1127 (build_dis_hash_table): Use them. Hash macro insns as well.
1128 (cgen_dis_lookup_insn): Update.
1129 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1130 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1131 (cgen_macro_insn_count): New function.
1132 start-sanitize-cygnus
1133 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1134 All callers updated. Sanity check result of extract fn.
1135 (@arch@_cgen_get_insn_operands): Change result type to void.
1136 Delete args insn_value, length. New arg fields. All callers updated.
1137 (@arch@_cgen_lookup_get_insn_operands): New function.
1139 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1141 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1143 * i386-dis.c (OP_DSSI): Print segment override.
1145 start-sanitize-r5900
1146 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1148 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1151 start-sanitize-r5900
1152 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1154 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1157 start-sanitize-r5900
1158 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1160 * vu0.h (vlqd, vlqi): Update per revised specs.
1164 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1166 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1167 (vif_operands): Update.
1168 (vif_get_unpackloc): Delete.
1169 (state_vif_unpackloc{,_star_p}): Delete.
1170 (dvp_opcode_init_parse): Update.
1171 (vif_unpack_len_value): Avoid divide by zero.
1174 start-sanitize-r5900
1175 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1177 * vu0.h: Specs changed for VCALLMSR bit pattern.
1178 * mips-dis.c: (print_insn_arg) Matching change.
1181 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1183 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1186 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1188 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1189 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1190 * configure.in: Define and substitute WIN32LDFLAGS and
1192 * aclocal.m4: Rebuild with new libtool.
1193 * configure, Makefile.in: Rebuild.
1195 start-sanitize-r5900
1196 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1198 * vu0.h: Corrected bit pattern for VMAXI opcode.
1201 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1203 * m32r-opc.c: Regenerate.
1206 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1208 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1209 (dvp_expand_macro): Implement.
1210 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1211 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1214 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1216 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1217 before trying to copy it.
1218 * Makefile.in: Rebuild.
1220 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1222 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1224 start-sanitize-m32rx
1225 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1227 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1230 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1232 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1233 from an arbitrary valid buffer instead of fetching them on demand
1235 (invalid_float): use bit_extract_simple() instead of bit_extract().
1237 start-sanitize-m32rx
1238 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1240 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1241 * m32r-opc.h: Add extra control registers.
1244 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1246 From H.J. Lu <hjl@gnu.org>:
1247 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1250 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1252 * Branched binutils 2.9.
1254 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1256 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1257 disassembling last 4 bytes of a section.
1259 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1261 Fix some gcc -Wall warnings:
1262 * arc-dis.c (print_insn): Add casts to avoid warnings.
1263 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1264 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1266 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1267 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1268 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1269 (parse_ffstreg, parse_vif_mode): Likewise.
1271 * m10200-dis.c (disassemble): Likewise.
1272 * m10300-dis.c (disassemble): Likewise.
1273 * ns32k-dis.c (print_insn_ns32k): Likewise.
1274 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1275 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1276 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1277 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1278 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1280 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1281 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1282 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1284 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1285 start-sanitize-tic80
1286 * tic80-dis.c (print_one_instruction): Likewise.
1288 * w65-dis.c (print_operand): Likewise.
1289 * z8k-dis.c (fetch_data): Likewise.
1290 * a29k-dis.c: Add return type for find_byte_func_type.
1291 * arc-opc.c: Include <stdio.h>. Remove declarations of
1292 insert_multshift and extract_multshift.
1293 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1295 (extract_value): Fully parenthesize expression.
1297 * dvp-opc.c: Include <ctype.h>.
1298 (print_sdest): Add default case to switch.
1300 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1301 * h8500-opc.h (h8500_table): Fully bracket initializer.
1302 * w65-opc.h (optable): Likewise.
1303 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1304 * i386-dis.c (OP_E): Initialize local variables.
1305 * m10200-dis.c (print_insn_mn10200): Likewise.
1306 * mips-dis.c (print_insn_mips16): Likewise.
1307 * sh-dis.c (print_insn_shx): Likewise.
1308 * v850-dis.c (print_insn_v850): Likewise.
1309 * ns32k-dis.c (print_insn_arg): Declare.
1310 (get_displacement, invalid_float): Declare.
1311 (list_search, sign_extend, flip_bytes): Declare return type.
1312 (get_displacement): Likewise.
1313 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1315 (print_insn_ns32k): Make i unsigned.
1316 (invalid_float): Make static. Declare type of val.
1317 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1318 on each for iteration.
1319 * tic30-dis.c (get_indirect_operand): Likewise.
1320 * z8k-dis.c (print_insn_z8001): Declare return type.
1321 (print_insn_z8002): Likewise.
1322 (unparse_instr): Fix sprintf format strings.
1324 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1326 * mips-opc.c: Add "sync.l" and "sync.p".
1329 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1331 * dvp-opc.c (extract_vif_datalen): Rewrite.
1332 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1334 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1336 * dvp-dis.c (print_insn): Print unpack address in hex.
1337 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1338 Don't skip over '*', just record it.
1339 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1340 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1341 Don't skip over '*', just record it.
1342 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1343 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1344 (vif_opcodes): Likewise.
1345 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1346 (vif_macros,vif_macro_count): New globals.
1347 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1348 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1349 (vif_get_wl_cl): New function.
1350 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1353 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1355 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1356 default m68k variant to recognize.
1358 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1359 (ctrl, cobr, mem, ea): Likewise.
1360 (print_addr): Likewise. Remove cast.
1361 (ea): Cast argument of print_addr to bfd_vma.
1363 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1365 (cgen_parse_unsigned_integer): Likewise.
1366 (cgen_parse_address): Likewise.
1368 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1370 * i960-dis.c (ctrl): Add full braces to structure initialization.
1371 (cobr, mem, reg): Likewise.
1372 (ea): Correct parenthesization in expression.
1374 * cgen-asm.c: Include <ctype.h>.
1375 (build_asm_hash_table): Remove unused local variable i.
1376 (cgen_parse_keyword): Add casts to avoid warnings.
1378 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1379 symbol. Fix indentation.
1380 (print_insn_little_arm): Likewise.
1382 start-sanitize-r5900
1383 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1385 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1389 start-sanitize-m32rx
1390 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1392 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1397 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1399 * dvp-opc.c (vif_operand_datalen_special): New global.
1402 start-sanitize-r5900
1403 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1405 * vu0.h (vcallms): Use 'O' for call target operand.
1406 * mips-dis.c (print_insn_arg): Handle 'O'.
1409 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1411 * configure.in: Use AM_DISABLE_SHARED.
1412 * aclocal.m4, configure: Rebuild with libtool 1.2.
1414 start-sanitize-r5900
1415 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1417 * mips-dis.c: Change '%' to '#' in r5900 support.
1421 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1423 These patches are courtesy of Jonathan Walton and Tony Thompson
1424 (athompso@cambridge.arm.com).
1426 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1429 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1430 both the offset and the label closest to the destination.
1432 start-sanitize-r5900
1433 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1435 * vu0.h: New file with cop2/vu0 instructions.
1436 * mips-opc.c: Include vu0.h.
1437 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1439 (print_insn_mips): Do not emit a tab after an instruction if the
1440 first arg is an instruction completer (&). If the next arg is an
1441 escape character (%), then print the next arg verbatim.
1442 * Makefile.am (mips-opc.lo): Depend on vu0.h
1446 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1448 * dvp-opc.c (vif_opcodes): Add stcycl.
1450 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1452 * dvp-dis.c (print_dma): Change length from 16 to 8.
1455 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1457 * m32r-opc.h: Regenerate.
1460 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1462 * dvp-opc.c (print_dest1): Print dest spec again.
1463 (print_vfreg,print_accdest): Likewise.
1464 (vif_unpack_len): Round result up to word boundary.
1467 start-sanitize-vr4320
1468 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1470 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1472 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1474 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1479 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1481 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1482 (print_insn): Do mask comparison on proper opcode word.
1483 Print unsigned values in hex.
1484 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1485 (parse_bc): Catch missing dest.
1486 (parse_vfreg): Replace atoi call with strtol.
1487 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1488 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1489 (extract_gif_eop): New function.
1490 (gif_operands): Update eop entry.
1491 (VGIFOP,VGIFNREGS): Fix calcs.
1492 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1493 (gif_regs): Add entry for unused 11 case.
1494 (print_gif_regs): Print empty list instead of nothing.
1495 (extract_gif_nloop): Fix value calc.
1496 (print_gif_nloop): Always print value, even if 0.
1497 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1498 (vif_operands): Use them for wl,cl fields.
1499 (state_vif_wl,state_vif_cl): New static locals.
1500 (parse_vif_mode): Handle numeric args.
1501 (vif_unpack_len_value,vif_unpack_len): New functions.
1502 (vif_insn_len): Call vif_unpack_len.
1505 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1507 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1509 start-sanitize-cygnus
1510 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1512 * cgen-asm.in: Move insertion of generated routines to top of file.
1513 (insert_normal): Add prototype. Delete `shift' arg.
1514 * cgen-dis.in: Move insertion of generated routines to top of file.
1515 (extract_normal): Add prototype. Delete `shift' arg.
1516 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1517 (print_keyword): Add prototype. Fix type of `attrs' arg.
1520 start-sanitize-vr4320
1521 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1523 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1524 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1527 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1529 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1530 assume that info->symbols is non-empty.
1532 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1534 * alpha-opc.c (cvtqs) There is no such thing.
1535 (cvttq): Missing most of the /*d variants.
1537 start-sanitize-r5900
1538 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1540 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1542 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1543 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1546 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1548 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1549 delayed branches or jumps.
1552 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1554 * dvp-opc.c (vif_operands): Add unpack[u] support.
1555 (vif_opcodes): Ditto.
1556 (*_vif_imrubits): Renamed from *_vif_imrbits.
1558 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1560 * dvp-dis.c (print_insn): Handle word number.
1561 Handle mips address vs vu address.
1562 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1563 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1564 ({insert,extract}_dma_addr): Fix word ofset.
1565 ({insert,print}_gif_regs): Fix encode/decode.
1568 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1570 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1572 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1573 * tic30-dis.c (print_branch): Likewise.
1575 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1576 * dvp-dis.c (dvp_info_mach_type): New function.
1577 (print_insn_dvp): Call it.
1578 (print_vif): Return length of 4 if mpg or direct insn so following
1579 insns get properly disabled.
1580 (print_gif): Fix word order.
1581 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1582 (gif_operands): Fix word order.
1583 (gif_opcodes): Likewise.
1584 ({insert,extract,print}_gif_regs): Likewise.
1585 (gif_regs): Add new register number/name changes.
1586 (dma_opcodes): Add dmarefe insn.
1589 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1591 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1592 saved_symbol code as it is no longer needed.
1594 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1596 * cgen-asm.c: Include symcat.h.
1597 * cgen-dis.c,cgen-opc.c: Ditto.
1598 start-sanitize-cygnus
1599 * cgen-asm.in,cgen-dis.in: Ditto.
1601 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1604 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1606 * dvp-opc.c (extra_dma_flags): Fix typos.
1607 (dma_operands): Fix word numbers.
1608 (dma_opcodes): Likewise.
1609 ({insert,extract}_dma_flags): Likewise.
1612 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1614 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1617 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1619 * dvp-dis.c (print_gif): Complete.
1620 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1621 (state_gif_{nregs,regs,nloop}): New static locals.
1622 (*_gif_*): Complete.
1623 (dvp_opcode_init_{parse,print}): Init gif state locals.
1624 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1625 (vif_insn_len): Handle `unpack'.
1626 ({insert,extract}_dma_flags): Complete.
1629 start-sanitize-r5900
1630 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1632 * mips-opc.c (mula.s): Renamed from multa.s.
1635 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1637 * m32r-opc.[ch]: Regenerate.
1640 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1642 * dvp-opc.c (dma_operands): Rewrite.
1643 (dma_operand_{count,addr}): New globals.
1644 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1645 (insert_dma_addr): Insert value into insn.
1646 (extract_dma_addr): Extract value from insn.
1648 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1650 * dvp-dis.c (print_vu): Handle loi insns.
1651 (print_insn): Likewise.
1652 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1653 (vu_operands): Make LDEST1 a FAKE operand.
1654 (parse_dest1): Allow elided argument.
1655 (print_dest1): Don't print the argument.
1657 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1659 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1660 (print_vfreg): Don't print dest spec.
1661 (parse_accdest): Dest spec is optional.
1662 (print_accdest): Don't print dest spec.
1665 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1667 start-sanitize-cygnus
1668 * Makefile.am (CGENFILES): Update.
1669 * Makefile.in: Regenerate.
1670 * cgen-asm.in (insert_normal): Result is error message now.
1671 Validate value to be inserted.
1672 (insert_insn_normal): Result is error message now.
1673 (@arch@_cgen_assemble_insn): Update.
1675 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1676 arguments. Don't perform validation here.
1677 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1679 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1681 start-sanitize-cygnus
1682 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1683 operand instance list.
1685 * m32r-opc.c: Regenerate.
1687 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1689 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1690 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1692 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1694 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1696 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1698 * configure.in: Get the version number from BFD.
1699 * configure: Rebuild.
1701 From H.J. Lu <hjl@gnu.org>:
1702 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1703 * Makefile.in: Rebuild.
1705 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1707 * m32r-opc.c: Regenerate.
1708 * m32r-opc.h: Regenerate.
1710 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1712 start-sanitize-cygnus
1713 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1714 Ignore ALIAS insns if asked to.
1715 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1717 * m32r-opc.c: Regenerate.
1720 * dvp.opc.c: Nicely format opcode tables.
1721 (vu_operands): New element UFLAGS.
1722 (parse_uflags,print_uflags): New functions.
1723 (vu_upper_opcodes): Add UFLAGS to all insns.
1726 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1728 Fix rac to accept only a0:
1729 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1730 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1731 Introduce OPERAND_GPR.
1732 * d10v-dis.c (print_operand): Likewise.
1734 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1736 start-sanitize-cygnus
1737 * cgen-opc.in: New file.
1738 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1739 * Makefile.am (CGENFILES): Add cgen-opc.in.
1740 * Makefile.in: Regenerate.
1741 * cgen-dis.in (*): Use PTR instead of void *.
1742 (print_insn): Delete unused vars `i', `syntax'.
1744 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1745 (cgen_hw_lookup): Make result const.
1746 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1749 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1751 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1752 (vif_opcodes): Update renamed insns.
1753 * dvp-dis.c (*): Likewise.
1756 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1758 * configure, aclocal.m4: Rebuild with new libtool.
1760 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1762 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1763 instructions use a PC relative branch, not absolute.
1765 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1767 * configure.in: Set libtool_enable_shared rather than
1768 libtool_shared. Remove diversion hack.
1769 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1771 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1773 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1774 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1776 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1778 * tic30-dis.c: New file.
1779 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1780 * configure.in: Handle bfd_tic30_arch.
1781 * Makefile.am: Rebuild dependencies.
1782 (CFILES): Add tic30-dis.c
1783 (ALL_MACHINES): Add tic30-dis.lo.
1784 * configure, Makefile.in: Rebuild.
1786 start-sanitize-m32rx
1787 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1789 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1790 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1791 macwhi-a and macwlo-a instructions.
1795 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1797 * dvp-opc.c, fixed encoding of a bunch of instructions to
1798 be consistent with the asmvu assembler (and inconsistent
1799 with the specification).
1801 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1803 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1804 in the opcode table. The pkemscalf instruction must come first.
1806 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1808 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1811 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1813 * m32r-opc.h (HAVE_CPU_M32R): Define.
1816 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1818 * dvp-dis.c, dvp-opc.c: New files.
1819 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1820 * configure: Regenerate.
1821 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1822 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1823 (mips-dis.lo): Compile with @archdefs@.
1824 * Makefile.in: Regenerate.
1825 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1826 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1829 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1831 * v850-opc.c (insertion routines): If both alignment and size is
1832 wrong then report this.
1834 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1836 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1837 Only recognize instructions for the current target_processor.
1839 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1841 * d10v-dis.c (PC_MASK): Correct value.
1842 (print_operand): If there's a reloc, don't calculate the
1843 address because they could be in different sections.
1845 start-sanitize-cygnus
1846 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1848 * cgen.sh: Rewrite to be like simulator's version.
1849 * Makefile.am (cgen): Update call to cgen.sh.
1850 * Makefile.in: Regenerate
1853 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1855 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1856 instruction after the 4650's "mul" instruction; nobody's using the
1857 4010 these days. If object files someday indicate which processor
1858 variant they're intended for, we can do a better job at this.
1860 start-sanitize-r5900
1861 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1863 * mips-opc.c (c.lt.s): Add r5900 variant.
1867 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1869 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1870 table provided entry size. Use CGEN_INSN_MNEMONIC.
1871 (cgen_parse_keyword): Rewrite.
1872 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1873 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1874 * cgen-opc.c: Clean up pass over `struct foo' usage.
1875 (cgen_keyword_lookup_value): Handle "" entry.
1876 (cgen_keyword_add): Likewise.
1877 start-sanitize-cygnus
1878 * Makefile.am: Add cgen support.
1879 * Makefile.in: Regenerate.
1880 * configure.in: Add cgen support.
1881 * configure: Regenerate.
1882 * aclocal.m4: Regenerate.
1883 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1886 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1888 * mips-opc.c: Add FP_D to s.d instruction flags.
1890 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1892 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1894 start-sanitize-tic80
1895 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1897 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1898 PC relative offset forms before the 15 bit forms. An assembler command
1899 line option now chooses the default.
1902 start-sanitize-r5900
1903 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1905 * mips-opc.c: Add many missing r5900 instructions.
1908 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1910 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1911 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1913 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1915 * configure: Only build libopcodes shared if --enable-shared's value
1916 was `yes', or was set to `*opcodes*'.
1917 * aclocal.m4: Likewise.
1918 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1919 original source of this bit of code. It's not clear what the best fix
1922 start-sanitize-r5900
1923 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1925 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1927 start-sanitize-tic80
1928 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1930 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1931 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1932 offset forms before the 15 bit forms, to default to the long forms.
1935 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1937 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1939 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1941 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1942 symbol if none is present.
1943 (print_insn_big_arm): Prevent examination of stored symbol if
1946 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1948 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1950 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1952 * disassemble.c: Remove disasm_symaddr() function.
1954 * arm-dis.c: Use info->symbol instead of info->flags to determine
1955 if disassmbly should be in Thumb or Arm mode.
1957 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1959 * arm-dis.c: Add support for disassembling Thumb opcodes.
1960 (print_insn_thumb): New function.
1962 * disassemble.c (disasm_symaddr): New function.
1964 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1965 (thumb_opcodes): Table of Thumb opcodes.
1967 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1969 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1971 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1972 and 'v' as operand types.
1974 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1976 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1977 <olivier.carmona@di.epfl.ch>.
1978 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1979 which has a two word opcode with a one word argument.
1981 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1983 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1984 unsigned, not signed.
1985 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1987 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1989 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1990 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1991 (ftrv): Slay the cut-and-paste monster.
1993 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1995 * d10v-dis.c (print_operand):
1996 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1998 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2000 * d10v-opc.c (OPERAND_FLAG): Split into:
2001 (OPERAND_FFLAG, OPERAND_CFLAG) .
2005 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2007 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2008 field for all INSN_MACRO's.
2009 * mips16-opc.c: same
2011 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2013 * mips-opc.c (sync,cache): These are 3900 insns.
2015 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2017 sh-opc.h (sh_table): Remove ftst/nan.
2019 start-sanitize-cygnus
2020 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
2022 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
2023 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
2025 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
2029 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
2031 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
2032 Add tx49 insns and configury.
2035 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2037 * mips-opc.c (ffc, ffs): Fix mask.
2039 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2041 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2044 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2046 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2047 start-sanitize-cygnus
2048 Added VR5400 instructions.
2049 (N5): New cpu-id macro.
2051 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2053 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2055 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2056 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2058 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2060 * v850-dis.c (disassemble): Replace // with /* ... */
2062 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2064 * sparc-opc.c: Add wr & rd for v9a asr's.
2065 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2066 (v9a_asr_reg_names): New variable.
2067 Patch from David Miller <davem@vger.rutgers.edu>.
2069 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2071 * sparc-opc.c (v9notv9a): New insn type.
2072 (IMPDEP): Move to the end to not conflict with edge8 et al.
2073 Patch from David Miller <davem@vger.rutgers.edu>.
2075 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2077 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2079 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2081 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2083 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2085 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2086 of disassemble_info structure to determine if an overlay address
2087 has a matching symbol in low memory.
2089 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2090 new symbol_at_address_func field in disassemble_info structure.
2092 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2094 * v850-opc.c (extract_d22): Use signed arithmatic.
2096 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2098 * mips-opc.c: Three op mult is not an ISA insn.
2100 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2102 * mips-opc.c: Fix formatting.
2104 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2107 than assuming that char is signed. Explicitly sign extend 16 bit
2108 values, rather than assuming that short is 16 bits.
2109 (OP_sI, OP_J, OP_DIR): Likewise.
2111 start-sanitize-v850e
2112 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2114 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2118 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2120 * v850-opc.c: Fix typo in comment.
2122 * v850-dis.c (disassemble): Add test of processor type when
2123 determining opcodes.
2125 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2127 * configure.in: Use a diversion to set enable_shared before the
2128 arguments are parsed.
2129 * configure: Rebuild.
2131 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2133 * m68k-opc.c (TBL1): Use ! rather than `.
2134 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2136 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2138 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2140 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2142 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2145 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2146 * aclocal.m4: Rebuild with new libtool.
2147 * configure: Rebuild.
2149 start-sanitize-v850e
2150 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2152 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2155 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2157 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2159 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2161 * v850-opc.c (v850_opcodes): Further rearrangements.
2163 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2165 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2167 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2169 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2172 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2174 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2176 * mips16-opc.c: Added mips16 sdbbp.
2179 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2181 * v850-opc.c: Initialise processors field of v850_opcode structure.
2183 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2185 Merge changes from Martin Hunt:
2187 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2189 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2190 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2191 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2193 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2195 * d30v-dis.c (print_insn): First operand of d*i (delayed
2196 branch) instructions is relative.
2198 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2199 (d30v_operand_table): Add IMM6S3 type.
2200 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2202 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2203 and cmp instructions.
2205 * d30v-opc.c: Correct entries for repeat*, and sat*.
2206 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2207 types. Correct several formats.
2209 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2211 * d30v-opc.c (pre_defined_registers): Change control registers.
2213 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2214 SHORT_C2. Manual was incorrect.
2216 * d30v-dis.c (lookup_opcode): Return value now indicates
2217 if an opcode has a short and a long form. Used for deciding
2218 to append a ".s" or ".l".
2219 (print_insn): Append a ".s" to an instruction if it is
2220 the short form and ".l" if it is a long form. Do not append
2221 anything if the instruction has only one possible size.
2223 * d30v-opc.c: Change mulx2h to require an even register.
2224 New form: SHORT_A2; a SHORT_A form that needs an even
2225 register as the first operand.
2227 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2228 instruction was not being disassembled if there were an odd
2229 number of instructions.
2231 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2233 start-sanitize-v850e
2234 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2236 * v850-dis.c (disassemble): Improved display of register lists.
2239 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2241 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2242 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2243 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2244 fandnot1s, fandnot2s.
2246 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2248 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2250 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2252 * cgen-asm.c (cgen_parse_address): New argument resultp.
2253 All callers updated.
2254 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2256 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2258 * mn10200-dis.c (disassemble): PC relative instructions are
2259 relative to the next instruction, not the current instruction.
2261 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2263 * v850-dis.c (disassemble): Only signed extend values that are not
2264 returned by extract functions.
2265 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2267 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2269 * v850-opc.c: Update comments. Remove use of
2270 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2272 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2274 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2276 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2278 * configure: Rebuilt with latest devo autoconf for NT support.
2280 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2282 * v850-dis.c (disassemble): Use curly brace syntax for register
2285 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2286 where r0 is being used as a destination register.
2288 start-sanitize-v850e
2289 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2291 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2294 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2296 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2297 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2298 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2299 Add insns to access SGR and DBR.
2300 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2302 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2304 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2306 start-sanitize-v850e
2307 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2309 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2310 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2313 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2315 * configure (cgen_files): Add support for v850e target.
2316 * configure.in (cgen_files): Add support for v850e target.
2318 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2320 * configure (cgen_files): Add support for v850ea target.
2321 * configure.in (cgen_files): Add support for v850ea target.
2324 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2326 * configure.in (bfd_arc_arch): Add.
2327 * configure: Rebuild.
2328 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2329 * Makefile.in: Rebuild.
2330 * arc-dis.c, arc-opc.c: New files.
2331 * disassemble.c (ARCH_all): Define ARCH_arc.
2332 (disassembler): Add ARC support.
2334 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2336 start-sanitize-v850e
2337 * v850-dis.c (disassemble): Add support for v850EA instructions.
2339 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2340 (v850_opcodes): Add v850EA instructions.
2342 * v850-dis.c (disassemble): Add support for v850E instructions.
2344 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2345 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2346 insert_spe, extract_spe): New Functions.
2347 (v850_opcodes): Add v850E instructions.
2350 * v850-opc.c: Reorganised and re-layed out to improve readability
2353 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2355 * configure: Rebuild with autoconf 2.12.1.
2357 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2359 * aclocal.m4, configure: Rebuild with new automake patches.
2361 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2363 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2364 * acinclude.m4: Just include acinclude.m4 from BFD.
2365 * aclocal.m4, configure: Rebuild.
2367 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2369 * Makefile.am: New file, based on old Makefile.in.
2370 * acconfig.h: New file.
2371 * acinclude.m4: New file.
2372 * stamp-h.in: New file.
2373 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2374 Removed shared library handling; now handled by libtool. Replace
2375 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2376 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2377 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2378 handling in AC_OUTPUT.
2379 * dep-in.sed: Change .o to .lo.
2380 * Makefile.in: Now built with automake.
2381 * aclocal.m4: Now built with aclocal.
2382 * config.in, configure: Rebuild.
2384 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2386 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2388 start-sanitize-r5900
2389 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2391 * mips-opc.c: Fix coding of mtsa.
2394 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2396 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2398 * sparc-dis.c (sorted_opcodes): New static local.
2399 (struct opcode_hash): `opcode' is pointer to const element.
2400 (build_hash): First arg is now table of sorted pointers.
2401 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2402 (compare_opcodes): Update.
2404 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2406 * cgen-opc.c: #include <ctype.h>.
2407 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2408 Handle case insensitive hashing.
2409 (hash_keyword_value): Change type of `value' to unsigned int.
2411 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2413 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2414 precision FP, mark it as such. Likewise for double precision
2415 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2417 start-sanitize-r5900
2418 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2421 start-sanitize-r5900
2422 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2424 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2425 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2428 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2430 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2432 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2433 nesting depth when all the macros are expanded.
2435 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2437 * sparc-opc.c: The fcmp v9a instructions take an integer register
2438 as a destination, not a floating point register. From Christian
2439 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2441 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2443 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2444 syntax. From Roman Hodek
2445 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2447 * i386-dis.c (twobyte_has_modrm): Fix pand.
2449 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2451 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2453 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2455 * arm-dis.c: Add prototypes for arm_decode_shift and
2458 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2460 * mips-opc.c: Add r3900 insns.
2462 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2464 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2465 print delay slot instructions on the same line. When using a PC
2466 relative load, add a comment with the value being loaded if it can
2469 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2471 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2472 to pushS/popS for segment regs and byte constant so that
2473 pushw/popw printed when in 16 bit data mode.
2475 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2476 print cbtw, cwtd in 16 bit data mode.
2477 * i386-dis.c (putop): extra case W to support above.
2479 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2480 address size prefix in 16 bit address mode.
2482 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2484 * sh-dis.c: Reindent. Rename local variable fprintf to
2487 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2489 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2491 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2493 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2495 * mips16-opc.c (mip16_opcodes): same.
2497 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2499 * m68k-opc.c (moveb): Change $d to %d.
2501 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2503 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2504 (twobyte_has_modrm): Likewise.
2506 (OP_MMX, OP_EM, OP_MS): New static functions.
2508 * i386-dis.c: Revert patch of April 4. The output now matches
2511 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2513 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2516 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2518 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2520 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2522 * Makefile.in (install): Depend upon installdirs.
2523 (installdirs): New target.
2525 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2527 From Thomas Graichen <graichen@rzpd.de>:
2528 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2529 * configure: Rebuild.
2531 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2533 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2534 Delete string{,s}.h support.
2536 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2538 * cgen-asm.c (cgen_parse_operand_fn): New global.
2539 (cgen_parse_{{,un}signed_integer,address}): Update call to
2540 cgen_parse_operand_fn.
2541 (cgen_init_parse_operand): New function.
2542 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2543 from cgen_asm_init_parse.
2544 (m32r_cgen_assemble_insn): New operand `errmsg'.
2545 Delete call to as_bad, return error message to caller.
2546 (m32r_cgen_asm_hash_keywords): #if 0 out.
2548 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2550 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2552 [case 'J']: Fix typo in register name.
2554 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2556 * configure.in: Substitute SHLIB_LIBS.
2557 * configure: Rebuild.
2558 * Makefile.in (SHLIB_LIBS): New variable.
2559 ($(SHLIB)): Use $(SHLIB_LIBS).
2561 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2563 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2565 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2567 * disassemble.c (disassembler): Handle m32r.
2569 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2571 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2572 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2573 * Makefile.in (CFILES): Add them.
2574 (ALL_MACHINES): Add them.
2575 (dependencies): Regenerate.
2576 * configure.in (cgen_files): New variable.
2577 (bfd_m32r_arch): Add entry.
2578 * configure: Regenerate.
2580 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2582 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2583 * configure: Rebuild.
2585 * Makefile.in: Rebuild dependencies.
2587 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2589 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2592 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2594 * Branched binutils 2.8.
2596 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2598 * m10200-dis.c: Rename from mn10200-dis.c.
2599 * m10200-opc.c: Rename from mn10200-opc.c.
2600 * m10300-dis.c: Rename from mn10300-dis.c
2601 * m10300-opc.c: Rename from mn10300-opc.c.
2602 * Makefile.in: Update accordingly.
2604 * mips16-opc.c: Add mul and dmul macros.
2606 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2608 * makefile.vms: Update CFLAGS, add clean target.
2610 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2612 * mips-opc.c: Add "wait". From Ralf Baechle
2613 <ralf@gnu.ai.mit.edu>.
2615 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2616 * configure, config.in: Rebuild.
2617 * sysdep.h: Include <stdlib.h> if it exists.
2618 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2620 * Makefile.in: Rebuild dependencies.
2622 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2624 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2625 Andrew Bray <andy@madhouse.demon.co.uk>.
2627 * mips-opc.c: Add cast when setting mips_opcodes.
2629 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2631 * v850-dis.c (disassemble): Fix sign extension problem.
2632 * v850-opc.c (extract_d*): Fix sign extension problems to make
2633 disassembly calculate branch offsets correctly.
2635 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2637 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2639 * mips-opc.c: Add dctr and dctw.
2641 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2643 * d30v-dis.c (print_insn): Change the way signed constants
2646 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2648 * Makefile.in (BFD_H): New variable.
2649 (HFILES): New variable.
2650 (CFILES): Add all C files.
2651 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2652 Delete old dependencies, and build new ones.
2653 * dep-in.sed: New file.
2655 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2657 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2659 start-sanitize-coldfire
2660 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2662 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2665 end-sanitize-coldfire
2666 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2668 * mn10200-opc.c: Change "trap" to "syscall".
2669 * mn10300-opc.c: Add new "syscall" instruction.
2671 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2673 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2674 mulul insns on the coldfire.
2676 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2678 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2679 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2680 (print_insn_little_arm): Likewise.
2682 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2684 Based on patches from H.J. Lu <hjl@lucon.org>:
2685 * i386-dis.c (fetch_data): Add prototype.
2686 * m68k-dis.c (fetch_data): Add prototype.
2687 (dummy_print_address): Add prototype. Make static.
2688 * ppc-opc.c (valid_bo): Add prototype.
2689 * sparc-dis.c (build_hash_table): Add prototype.
2690 (is_delayed_branch, compute_arch_mask): Add prototypes.
2691 (print_insn_sparc): Make several local variables const.
2692 (compare_opcodes): Change arguments to const PTR. Add prototype.
2693 * sparc-opc.c (arg): Change name field to be const.
2694 (lookup_name, lookup_value): Add prototypes. Change table and
2695 name parameters to be const.
2696 (sparc_encode_asi): Change name parameter to be const.
2697 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2698 (sparc_encode_sparclet_cpreg): Likewise.
2699 (sparc_decode_asi): Change return type to be const.
2700 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2701 (sparc_decode_sparclet_cpreg): Likewise.
2703 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2705 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2706 Solaris doesn't like the combined options, and the -f is
2708 (stamp-tshlink, install): Likewise.
2710 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2712 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2715 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2717 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2719 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2721 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2724 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2726 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2728 start-sanitize-tic80
2729 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2731 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2733 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2735 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2738 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2740 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2741 floatformat_to_double to make portable.
2742 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2745 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2747 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2748 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2750 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2752 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2753 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2755 start-sanitize-tic80
2756 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2758 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2759 (OFF_SL_BR_SCALED): ... to this, and added the flag
2760 TIC80_OPERAND_BASEREL to the flags word.
2761 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2765 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2767 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2768 Change mips_opcodes from const array to a pointer,
2769 and change bfd_mips_num_opcodes from const int to int,
2770 so that we can increase the size of the mips opcodes table
2773 start-sanitize-tic80
2774 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2776 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2777 store BITNUM values in the table in one's complement form
2778 to match behavior when assembler is given a raw numeric
2779 value for a BITNUM operand.
2780 * tic80-dis.c (print_operand_bitnum): Ditto.
2783 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2785 * d30v-opc.c: Removed references to FLAG_X.
2787 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2789 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2791 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2793 * Makefile.in: Added d30v object files.
2794 * configure: (bfd_d30v_arch) Rebuilt.
2795 * configure.in: (bfd_d30v_arch) Added new case.
2796 * d30v-dis.c: New file.
2797 * d30v-opc.c: New file.
2798 * disassemble.c (disassembler) Add entry for d30v.
2800 start-sanitize-tic80
2801 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2803 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2804 representations for the floating point BITNUM values.
2806 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2808 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2809 in the table in one's complement form, as they appear in the
2811 (tic80_symbol_to_value): Use macros to access predefined
2813 (tic80_value_to_symbol): Ditto.
2814 (tic80_next_predefined_symbol): New function.
2815 * tic80-dis.c (print_operand_bitnum): Remove code that did
2816 one's complement for BITNUM values.
2819 start-sanitize-r5900
2820 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2822 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2825 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2827 * makefile.vms: Remove 8 bit characters. Update to latest
2830 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2832 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2834 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2836 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2837 (IMM24_PCREL): Likewise.
2839 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2841 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2842 address for an extended PC relative instruction that is not a
2845 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2847 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2850 start-sanitize-tic80
2851 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2853 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2854 (tic80_opcodes): Sort entries so that long immediate forms
2855 come after short immediate forms, making it easier for
2856 assembler to select the right one for a given operand.
2859 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2861 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2863 (print_insn_mips16): Likewise.
2865 start-sanitize-r5900
2866 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2868 * mips-opc.c: add r5900.
2871 start-sanitize-tic80
2872 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2874 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2875 a symbol class that restricts translation to just that
2876 class (general register, condition code, etc).
2878 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2880 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2881 and REG_DEST_E for register operands that have to be
2882 an even numbered register. Add REG_FPA for operands that
2883 are one of the floating point accumulator registers.
2884 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2885 (tic80_opcodes): Change entries that need even numbered
2886 register operands to use the new operand table entries.
2887 Add "or" entries that are identical to "or.tt" entries.
2890 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2892 * mips16-opc.c: Add new cases of exit instruction for
2894 * mips-dis.c (print_mips16_insn_arg): Display floating point
2895 registers in operands of exit instruction. Print `$' before
2896 register names in operands of entry and exit instructions.
2898 start-sanitize-tic80
2899 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2901 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2902 pairs for all predefined symbols recognized by the assembler.
2903 Also used by the disassembling routines.
2904 (tic80_symbol_to_value): New function.
2905 (tic80_value_to_symbol): New function.
2906 * tic80-dis.c (print_operand_control_register,
2907 print_operand_condition_code, print_operand_bitnum):
2908 Remove private tables and use tic80_value_to_symbol function.
2911 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2913 * d10v-dis.c (print_operand): Change address printing
2914 to correctly handle PC wrapping. Fixes PR11490.
2916 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2918 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2921 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2923 * mips-dis.c (print_insn_mips16): Set insn_info information.
2924 (print_mips16_insn_arg): Likewise.
2926 * mips-dis.c (print_insn_mips16): Better handling of an extend
2927 opcode followed by an instruction which can not be extended.
2929 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2931 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2932 coldfire moveb instruction to not allow an address register as
2933 destination. Although the documentation does not indicate that
2934 this is invalid, experiments uncovered unexpected behavior.
2935 Added a comment explaining the situation. Thanks to Andreas
2936 Schwab for pointing this out to me.
2938 start-sanitize-tic80
2939 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2941 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2942 entries are presorted so that entries with the same mnemonic are
2943 adjacent to each other in the table. Sort the entries for each
2944 instruction so that this is true.
2947 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2949 * m68k-dis.c: Include <libiberty.h>.
2950 (print_insn_m68k): Sort the opcode table on the most significant
2951 nibble of the opcode.
2953 start-sanitize-tic80
2954 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2956 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2957 "vsub", "vst", "xnor", and "xor" instructions.
2958 (V_a1): Renamed from V_a, msb of accumulator reg number.
2959 (V_a0): Add macro, lsb of accumulator reg number.
2961 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2963 * tic80-dis.c (print_insn_tic80): Broke excessively long
2964 function up into several smaller ones and arranged for
2965 the instruction printing function to be callable recursively
2966 to print vector instructions that have both a load and a
2967 math instruction packed into a single opcode.
2968 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2969 to explain why it comes after the other vector opcodes.
2972 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2974 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2975 move insns to handle immediate operands.
2977 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2979 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2980 fix operand mask in the "moveml" entries for the coldfire.
2982 start-sanitize-tic80
2983 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2985 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2986 New macros for building vector instruction opcodes.
2987 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2988 FMT_LI, which were unused. The field is now a flags field.
2989 Remove some opcodes that are possible, but illegal, such
2990 as long immediate instructions with doubles for immediate
2991 values. Add "vadd" and "vld" instructions.
2993 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2995 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2996 the order more logical. Move the shift alias instructions ("rotl",
2997 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2998 interspersed with the regular sr.x and sl.x instructions. Add
2999 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3000 "sub", "subu", "swcr", and "trap".
3002 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3004 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3005 (OFF_SL_PC): Renamed from OFF_SL.
3006 (OFF_SS_BR): New operand type for base relative operand.
3007 (OFF_SL_BR): New operand type for base relative operand.
3008 (REG_BASE): New operand type for base register operand.
3009 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3010 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3011 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3013 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3014 10 char field, padded with spaces on rhs, rather than a string
3015 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3016 than old TIC80_OPERAND_RELATIVE. Add support for new
3017 TIC80_OPERAND_BASEREL flag bit.
3019 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3021 * tic80-dis.c (print_insn_tic80): Print floating point operands
3023 * tic80-opc.c (SPFI): Add single precision floating point
3024 immediate operand type.
3025 (ROTATE): Add rotate operand type for shifts.
3026 (ENDMASK): Add for shifts.
3027 (n): Macro for the 'n' bit.
3028 (i): Macro for the 'i' bit.
3029 (PD): Macro for the 'PD' field.
3030 (P2): Macro for the 'P2' field.
3031 (P1): Macro for the 'P1' field.
3032 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3036 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3038 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3039 adding in current address for pc-relative operands.
3041 start-sanitize-tic80
3042 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3044 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3045 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3046 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3047 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3048 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3049 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3050 (REG_SCALED, LSI_SCALED): New operand types.
3051 (E): New macro for 'E' bit at bit 27.
3052 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3053 opcodes, including the various size flavors (b,h,w,d) for
3054 the direct load and store instructions.
3056 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3058 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3060 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3061 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3062 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3063 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3064 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3065 masks with "MASK_* & ~M_*" to get the M bit reset.
3066 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3068 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3070 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3071 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3072 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3074 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3075 CC, SICR, and LICR table entries.
3076 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3077 "bcnd", and "brcr" opcodes.
3080 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3082 * ppc-opc.c (powerpc_operands): Make comment match the
3083 actual fields (no shift field).
3084 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3085 start-sanitize-tic80
3086 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3087 partial implementation, work in progress.
3088 * tic80-opc.c (tic80_operands): Begin construction operands table.
3089 (tic80_opcodes): Continue populating opcodes table and start
3090 filling in the operand indices.
3091 (tic80_num_opcodes): Add this.
3094 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3096 * m68k-opc.c: Add #B case for moveq.
3098 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3100 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3101 before they are used.
3103 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3105 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3106 for "breakpoint" instruction.
3108 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3110 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3111 (dep): Use ALL_CFLAGS rather than CFLAGS.
3113 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3115 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3118 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3120 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3121 start-sanitize-tic80
3122 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3125 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3127 * mips16-opc.c: Add "abs".
3129 start-sanitize-tic80
3130 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3132 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3133 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3134 (disassembler): Add bfd_arch_tic80 support to set disassemble
3135 to print_insn_tic80.
3136 * tic80-dis.c (print_insn_tic80): Add stub.
3138 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3140 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3141 * configure: Regenerate with autoconf.
3142 * tic80-dis.c: Add file.
3143 * tic80-opc.c: Add file.
3146 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3148 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3150 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3152 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3153 (mn10200_opcodes): Use it for some logicals and btst insns.
3154 Add "break" and "trap" instructions.
3156 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3158 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3160 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3162 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3163 relative load or add now depends upon whether the instruction is
3166 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3168 * mn10200-dis.c: Finish writing disassembler.
3169 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3170 Fix mask for "jmp (an)".
3172 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3173 handle endianness issues for mn10300.
3175 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3177 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3179 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3180 instruction. Fix opcode field for "movb (imm24),dn".
3182 * mn10200-opc.c (mn10200_operands): Fix insertion position
3185 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3187 * mn10200-opc.c: Create mn10200 opcode table.
3188 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3189 but moving along nicely.
3191 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3193 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3195 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3197 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3198 specifiers for fmovem* instructions.
3200 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3202 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3204 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3206 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3209 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3211 * mn10300-opc.c: Add some comments explaining the various
3214 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3216 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3218 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3221 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3222 operand specifiers in fmovm* instructions.
3224 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3226 * ppc-opc.c (insert_li): Give an error if the offset has the two
3227 least significant bits set.
3229 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * mips-dis.c (print_insn_mips16): Separate the instruction from
3232 the arguments with a tab, not a space.
3234 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3236 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3239 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3242 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3244 * configure: Rebuild with autoconf 2.12.
3246 Add support for mips16 (16 bit MIPS implementation):
3247 * mips16-opc.c: New file.
3248 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3249 (mips16_reg_names): New static array.
3250 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3251 after seeing a 16 bit symbol.
3252 (print_insn_little_mips): Likewise.
3253 (print_insn_mips16): New static function.
3254 (print_mips16_insn_arg): New static function.
3255 * mips-opc.c: Add jalx instruction.
3256 * Makefile.in (mips16-opc.o): New target.
3257 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3258 * configure: Rebuild.
3260 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3262 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3263 operand specifiers in *save, *restore and movem* instructions.
3265 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3268 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3269 register operands for immediate arithmetic, not, neg, negx, and
3270 set according to condition instructions.
3272 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3273 specifier of the effective-address operand in immediate forms of
3274 arithmetic instructions. The specifier for the immediate operand
3275 notes how and where the constant will be stored.
3277 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3279 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3282 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3285 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3287 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3289 * mn10300-dis.c (disassemble): Handle register lists.
3291 * mn10300-opc.c: Fix handling of register list operand for
3292 "call", "ret", and "rets" instructions.
3294 * mn10300-dis.c (disassemble): Print PC-relative and memory
3295 addresses symbolically if possible.
3296 * mn10300-opc.c: Distinguish between absolute memory addresses,
3297 pc-relative offsets & random immediates.
3299 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3301 (disassemble): Handle SPLIT and EXTENDED operands.
3303 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3305 * mn10300-dis.c: Rough cut at printing some operands.
3307 * mn10300-dis.c: Start working on disassembler support.
3308 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3310 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3312 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3314 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3316 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3318 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3320 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3321 register argument is calls and jmp instructions.
3323 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3325 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3326 getx operand. Fix opcode for mulqu imm,dn.
3328 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3330 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3331 in MN10300_OPERAND_SPLIT operands for how many bits
3332 appear in the basic insn word. Add IMM32_HIGH24,
3333 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3334 (mn10300_opcodes): Use new operands as needed.
3336 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3337 for bset, bclr, btst instructions.
3338 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3340 * mn10300-opc.c (mn10300_operands): Remove many redundant
3341 operands. Update opcode table as appropriate.
3342 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3343 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3345 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3347 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3348 operands (for indexed load/stores). Fix bitpos for DI
3349 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3350 few instructions that insert immediates/displacements in the
3351 middle of the instruction. Add IMM8E for 8 bit immediate in
3352 the extended part of an instruction.
3353 (mn10300_operands): Use new opcodes as appropriate.
3355 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3357 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3358 sequential so the assembler never parallelizes it with
3361 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3363 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3364 a data/address register that appears in register field 0
3365 and register field 1.
3366 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3368 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3370 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3371 standard disassembly.
3373 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3374 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3375 Recategorize PALcode instructions.
3377 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3379 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3381 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3383 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3384 there are no operand types.
3386 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3388 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3390 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3392 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3394 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3396 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3398 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3399 and sst.w instructions.
3401 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3404 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3406 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3409 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3411 * ppc-opc.c (PPCPWR2): Define.
3412 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3415 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3417 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3418 field for movhu instruction.
3420 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3421 cast value to "long" not "signed long" to keep hpux10
3424 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3426 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3429 * mn10300-opc.c (FMT*): Remove definitions.
3431 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3432 for shift-by-register opcodes.
3434 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3435 into [AD][MN][01] for encoding the position of the register
3438 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3440 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3441 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3443 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3445 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3446 Fix various typos. Add "PAREN" operand.
3447 (MEM, MEM2): Define.
3448 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3449 operands. Fix several typos.
3451 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3454 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3456 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3457 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3459 (mn10300_opcodes): Break opcode format out into its own field.
3460 Update many operand fields to deal with signed vs unsigned
3461 issues. Fix one or two typos in the "mov" instruction
3462 opcode, mask and/or operand fields.
3464 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3466 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3467 m68851 wasn't reset.
3469 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3472 all opcodes. Very rough cut at operands for all opcodes.
3474 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3477 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3479 * mn10200-opc.c, mn10300-opc.c: New files.
3480 * mn10200-dis.c, mn10300-dis.c: New files.
3481 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3482 * disassemble.c: Break mn10x00 support into 10200 and 10300
3484 * configure.in: Likewise.
3485 * configure: Rebuilt.
3487 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3489 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3491 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3493 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3495 * disassemble (ARCH_mn10x00): Define.
3496 (disassembler): Handle bfd_arch_mn10x00.
3497 * configure.in: Recognize bfd_mn10x00_arch.
3498 * configure: Rebuilt.
3500 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3502 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3503 accordingly. Don't declare functions using op_rtn.
3505 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3507 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3508 params to be more standard.
3509 * (disassemble): Print absolute addresses and symbolic names for
3510 branch and jump targets.
3511 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3513 * (v850_opcodes): Add breakpoint insn.
3515 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * m68k-opc.c: Move the fmovemx data register cases before the
3518 other cases, so that they get recognized before the data register
3519 does gets treated as a degenerate register list.
3521 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3523 * mips-opc.c: Add a case for "div" and "divu" with two registers
3524 and a destination of $0.
3526 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3528 * mips-dis.c (print_insn_arg): Add prototype.
3529 (_print_insn_mips): Ditto.
3531 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * mips-dis.c (print_insn_arg): Print condition code registers as
3536 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3538 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3540 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3542 * v850-dis.c (disassemble): Make static. Provide prototype.
3544 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3546 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3549 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3551 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3552 ']' characters into the output stream.
3553 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3554 Add "memop" field to all opcodes (for the disassembler).
3555 Reorder opcodes so that "nop" comes before "mov" and "jr"
3556 comes before "jarl".
3558 * v850-dis.c (print_insn_v850): Fix typo in last change.
3560 * v850-dis.c (print_insn_v850): Properly handle disassembling
3561 a two byte insn at the end of a memory region when the memory
3562 region's size is only two byte aligned.
3564 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3566 * v850-dis.c (v850_reg_names): Define.
3567 (v850_sreg_names, v850_cc_names): Likewise.
3568 (disassemble): Very rough cut at printing operands (unformatted).
3570 * v850-opc.c (BOP_MASK): Fix.
3571 (v850_opcodes): Fix mask for jarl and jr.
3573 * v850-dis.c: New file. Skeleton for disassembler support.
3574 * Makefile.in Remove v850 references, they're not needed here.
3575 * configure.in: Add v850-dis.o when building v850 toolchains.
3576 * configure: Rebuilt.
3577 * disassemble.c (disassembler): Call v850 disassembler.
3579 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3580 (insert_d8_6, extract_d8_6): New functions.
3581 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3582 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3584 (IF4A, IF4B): Use "D7" instead of "D7S".
3585 (IF4C, IF4D): Use "D8_7" instead of "D8".
3586 (IF4E, IF4F): New. Use "D8_6".
3587 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3588 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3590 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3591 (v850_operands): Change D16 to D16_15, use special insert/extract
3592 routines. New new D16 that uses the generic insert/extract code.
3593 (IF7A, IF7B): Use D16_15.
3594 (IF7C, IF7D): New. Use D16.
3595 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3597 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3598 message. Issue an error if the branch offset is odd.
3600 * v850-opc.c: Add notes about needing special insert/extract
3601 for all the load/store insns, except "ld.b" and "st.b".
3603 * v850-opc.c (insert_d22, extract_d22): New functions.
3604 (v850_operands): Use insert_d22 and extract_d22 for
3606 (insert_d9): Fix range check.
3608 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3610 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3611 and set bits field to D9 and D22 operands.
3613 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3615 * v850-opc.c (v850_operands): Define SR2 operand.
3616 (v850_opcodes): "ldsr" uses R1,SR2.
3618 * v850-opc.c (v850_opcodes): Fix opcode specs for
3619 sld.w, sst.b, sst.h, sst.w, and nop.
3621 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3623 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3624 end of the opcode table.
3626 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3628 * d10v-opc.c (pre_defined_registers): Added register pairs,
3629 "r0-r1", "r2-r3", etc.
3631 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3633 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3634 Create I16U for an unsigned 16bit mmediate operand.
3635 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3637 * v850-opc.c (v850_operands): Define EP operand.
3638 (IF4A, IF4B, IF4C, IF4D): Use EP.
3640 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3641 with immediate operand, "movhi". Tweak "ldsr".
3643 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3644 correct. Get sld.[bhw] and sst.[bhw] closer.
3646 * v850-opc.c (v850_operands): "not" is a two byte insn
3648 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3650 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3652 * v850-opc.c (two): Get order of words correct.
3654 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3656 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3657 register source and destination operands.
3658 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3660 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3661 same thinko in "trap" opcode.
3663 * v850-opc.c (v850_opcodes): Add initializer for size field
3666 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3667 Add D8 for 8-bit unsigned field in short load/store insns.
3668 (IF4A, IF4D): These both need two registers.
3669 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3670 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3671 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3672 for "ldsr" and "stsr".
3673 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3676 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3677 short store word (sst.w).
3679 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3681 * v850-opc.c (v850_operands): Added insert and extract fields,
3682 pointers to functions that handle unusual operand encodings.
3684 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3686 * v850-opc.c (v850_opcodes): Enable "trap".
3688 * v850-opc.c (v850_opcodes): Fix order of displacement
3689 and register for "set1", "clr1", "not1", and "tst1".
3691 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3693 * v850-opc.c (v850_operands): Add "B3" support.
3694 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3697 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3699 * v850-opc.c: Close unterminated comment.
3701 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3703 * v850-opc.c (v850_operands): Add flags field.
3704 (v850_opcodes): add move opcodes.
3706 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3708 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3709 * configure: (bfd_v850v_arch) Add new case.
3710 * configure.in: (bfd_v850_arch) Add new case.
3711 * v850-opc.c: New file.
3713 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3715 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3717 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3719 * d10v-opc.c: Add additional information to the opcode
3720 table to help determinine which instructions can be done
3723 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3725 * mpw-make.sed: Update editing of include pathnames to be
3728 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3730 * arm-opc.h: Added "bx" instruction definition.
3732 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3734 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3736 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3738 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3740 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3742 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3744 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3746 * makefile.vms: Update for alpha-opc changes.
3748 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3750 * i386-dis.c (print_insn_i386): Actually return the correct value.
3751 (ONE, OP_ONE): #ifdef out; not used.
3753 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3755 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3756 Changed subi operand type to treat 0 as 16.
3758 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3760 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3763 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3765 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3766 memory transfer instructions. Add new format string entries %h and %s.
3767 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3770 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3772 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3773 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3775 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3777 * alpha-dis.c (print_insn_alpha_osf): Remove.
3778 (print_insn_alpha_vms): Remove.
3779 (print_insn_alpha): Make globally visible. Chose the register
3780 names based on info->flavour.
3781 * disassemble.c: Always return print_insn_alpha for the alpha.
3783 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3785 * d10v-dis.c (dis_long): Handle unknown opcodes.
3787 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3789 * d10v-opc.c: Changes to support signed and unsigned numbers.
3790 All instructions with the same name that have long and short forms
3791 now end in ".l" or ".s". Divs added.
3792 * d10v-dis.c: Changes to support signed and unsigned numbers.
3794 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3796 * d10v-dis.c: Change all functions to use info->print_address_func.
3798 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3800 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3801 move ccr/sr insns more strict so that the disassembler only
3802 selects them when the addressing mode is data register.
3804 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3805 * d10v-opc.c (pre_defined_registers): Declare.
3806 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3807 to pick a better name for the registers.
3809 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3811 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3812 operands for fexpand and fpmerge. From Christian Kuehnke
3813 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3815 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3817 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3818 print routine. Take new regnames and cpumask arguments.
3819 Kill the environment variable nonsense.
3820 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3821 (print_insn_alpha_vms): New function. Do VMS style regnames.
3822 * disassemble.c (disassembler): Test bfd flavour to pick
3823 between OSF and VMS routines. Default to OSF.
3825 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3827 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3828 * configure: Rebuild.
3829 * Makefile.in (install): Use @INSTALL_SHLIB@.
3831 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3833 * configure: (bfd_d10v_arch) Add new case.
3834 * configure.in: (bfd_d10v_arch) Add new case.
3835 * d10v-dis.c: New file.
3836 * d10v-opc.c: New file.
3837 * disassemble.c (disassembler) Add entry for d10v.
3839 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3841 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3842 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3844 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3846 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3847 distinguish between variants of the instruction set.
3848 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3849 distinguish between variants of the instruction set.
3851 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3853 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3854 the 8086 instruction set.
3855 * i386-dis.c: General cleanups. Make most things static. Add
3856 prototypes. Get rid of static variables aflags and dflags. Pass
3857 them as args (to almost everything).
3859 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3861 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3863 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3865 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3866 if the next arg is marked with SRC_IN_DST. Gross.
3868 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3869 we're looking for and find EXR.
3871 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3872 if we're looking for KBIT and we don't find it.
3874 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3877 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3878 3bit immediate operands.
3880 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3882 * Released binutils 2.7.
3884 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3885 <kkaempf@progis.ac-net.de>.
3887 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3889 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3891 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3893 * sparc-dis.c (print_insn_sparclite): New routine to print
3894 sparclite instructions.
3896 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3898 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3900 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3902 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3903 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3904 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3906 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3908 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3909 Use autoconf-set values.
3910 (docdir, oldincludedir): Removed.
3911 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3913 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3915 * alpha-opc.c: New file.
3916 * alpha-opc.h: Remove.
3917 * alpha-dis.c: Complete rewrite to use new opcode table.
3918 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3919 * configure: Rebuild with autoconf 2.10.
3920 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3921 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3923 (alpha-opc.o): New target.
3925 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3927 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3928 Set imm_added_to_rs1 even if the source and destination register
3931 * sparc-opc.c: Add some two operand forms of the wr instruction.
3933 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3935 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3938 * disassemble.c (disassembler): Handle H8/S.
3939 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3941 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3943 * sparc-opc.c: Add beq/teq as aliases for be/te.
3945 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3946 <sergei@msil.sps.mot.com>.
3948 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3950 * makefile.vms: New file.
3952 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3954 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3956 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3959 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3961 * i386-dis.c (OP_OFF): Call append_prefix.
3963 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3965 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3966 unsigned long to silence a warning from the Solaris PowerPC
3969 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3971 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3973 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3975 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3977 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3978 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3979 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3980 cpush, cpusha, cpull sparclet insns.
3982 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3984 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3986 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3988 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3989 Set F_FLOAT on other floating point instructions.
3991 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3993 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3995 (powerpc_opcodes): Add 860/821 specific SPRs.
3997 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3999 * configure.in: Permit --enable-shared to specify a list of
4000 directories. Set and substitute BFD_PICLIST.
4001 * configure: Rebuild.
4002 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4003 uses. Set to @BFD_PICLIST@.
4005 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4007 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4008 not "abs", which may be needed for the absolute in something
4009 like btst #0,@10:8. Print L_3 immediates separately from other
4010 immediates. Change ABSMOV reference to ABS8MEM.
4012 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4014 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4015 (current_arch_mask): New static global.
4016 (compute_arch_mask): New static function.
4017 (print_insn_sparc): Delete sparc_v9_p. New static local
4018 current_mach. Resort opcode table if current_mach changes.
4019 Generalize "insn not supported" test.
4020 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4021 Delete test for v9/!v9.
4022 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4024 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4025 (brfcx): Renamed to FBRX.
4026 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4027 coprocessor mnemonics are not supported on the sparclet).
4028 (condf): Renamed to CONDF.
4029 (SLCBCC2): Delete F_ALIAS flag.
4031 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4033 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4034 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4036 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4038 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4039 that the shared library version number is set correctly.
4041 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4043 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4044 Miles Bader <miles@gnu.ai.mit.edu>.
4045 * configure: Rebuild.
4047 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4049 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4052 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4054 * configure: Rebuild with autoconf 2.8.
4056 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4058 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4059 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4061 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4063 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4064 since they appear as targets in Makefile.in.
4065 * configure: Rebuild.
4067 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4069 * mpw-make.sed: Edit out shared library support bits.
4071 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4073 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4074 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4075 (sparc_opcodes): Add sparclet insns.
4076 (sparclet_cpreg_table): New static local.
4077 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4078 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4080 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4082 * i386-dis.c (index16): New static variable.
4083 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4085 (OP_indirE): Return result of OP_E.
4086 (OP_E): Check for 16 bit addressing mode, and disassemble
4087 correctly. Optimised 32 bit case a little. Don't print
4088 "(base,index,scale)" when sib specifies only an offset.
4090 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4092 * configure.in: Set and substitute SHLIB_DEP.
4093 * configure: Rebuild.
4094 * Makefile.in (SHLIB_DEP): New variable.
4095 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4096 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4097 COMMON_SHLIB, add them to piclist with appropriate modifications.
4098 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4099 here: just use piclist.
4101 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4103 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4104 (print_insn_sparc): Rewrite v9/not-v9 tests.
4105 (compare_opcodes): Likewise.
4106 * sparc-opc.c (MASK_<ARCH>): Define.
4107 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4108 (sparclet,v6notv9): Define.
4109 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4110 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4112 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4114 * configure.in: Call AC_PROG_CC before configure.host.
4115 * configure: Rebuild.
4117 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4119 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4121 * i386-dis.c (onebyte_has_modrm): New static array.
4122 (twobyte_has_modrm): New static array.
4123 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4125 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4127 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4130 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4132 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4135 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4137 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4138 m68010up, not just m68020up | cpu32.
4140 * Makefile.in (SONAME): New variable.
4141 ($(SHLINK)): Make a link to the transformed name, as well.
4142 (stamp-tshlink): New target.
4143 (install): Skip stamp-tshlink during install.
4145 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4147 * configure.in: Call AC_ARG_PROGRAM.
4148 * configure: Rebuild.
4149 * Makefile.in (program_transform_name): New variable.
4150 (install): Transform library name before installing it.
4152 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4154 * i960-dis.c (mem): Add HX dcinva instruction.
4156 Support for building as a shared library, based on patches from
4157 Alan Modra <alan@spri.levels.unisa.edu.au>:
4158 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4159 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4160 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4161 * configure: Rebuild.
4162 * Makefile.in (ALLLIBS): New variable.
4163 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4164 (COMMON_SHLIB, SHLINK): New variables.
4165 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4166 (STAGESTUFF): Remove variable.
4167 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4168 (stamp-piclist, piclist): New targets.
4169 ($(SHLIB), $(SHLINK)): New targets.
4170 ($(OFILES)): Depend upon stamp-picdir.
4171 (disassemble.o): Build twice if PICFLAG is set.
4172 (MOSTLYCLEAN): Add pic/*.o.
4173 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4174 (distclean): Remove pic and stamp-picdir.
4175 (install): Install shared libraries.
4176 (stamp-picdir): New target.
4178 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4180 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4181 Print unknown instruction as "unknown", rather than in hex.
4183 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4185 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4187 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4189 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4191 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4193 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4194 when necessary. From Ulrich Drepper
4195 <drepper@myware.rz.uni-karlsruhe.de>.
4197 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4199 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4200 sparc_num_opcodes. Update architecture enum values.
4201 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4202 (sparc_opcode_lookup_arch): New function.
4203 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4204 (sparc_opcodes): Add v9a shutdown insn.
4206 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4208 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4209 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4211 (print_insn_sparc64): Deleted.
4212 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4215 * sparc-opc.c (architecture_pname): Add v9a.
4217 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4219 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4220 incorrectly defined as 0x16 when it should be 0x15.
4221 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4222 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4223 excb (exception barrier) which is defined in the Alpha
4224 Architecture Handbook version 2.
4225 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4226 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4227 disassembled as or, for example.
4229 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4231 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4232 (_print_insn_mips): Change i from int to unsigned int.
4234 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4236 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4237 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4239 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4241 * i386-dis.c: Added Pentium Pro instructions.
4243 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4245 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4248 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4250 * sh-opc.h (sh_nibble_type): Added REG_B.
4251 (sh_arg_type): Added A_REG_B.
4252 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4254 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4256 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4258 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4260 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4262 * Makefile.in (distclean): Remove stamp-h. From Ronald
4263 F. Guilmette <rfg@monkeys.com>.
4265 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4267 From David Mosberger-Tang <davidm@azstarnet.com>:
4268 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4271 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4273 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4274 (sh_table): Added many SH3 opcodes.
4275 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4277 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4279 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4280 (subco,subco.): Mark this PPC, not PPCCOM.
4282 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4284 * configure: Rebuild with autoconf 2.7.
4286 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4288 * configure: Rebuild with autoconf 2.6.
4290 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4292 * configure.in: Sort list of architectures. Accept but do nothing
4293 for alliant, convex, pyramid, romp, and tahoe.
4295 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4297 * a29k-dis.c (print_special): Change num to unsigned int.
4299 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4301 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4304 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4306 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4307 * configure: Rebuilt.
4309 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4311 * configure.in: Add case for bfd_i860_arch.
4312 * configure: Rebuild.
4314 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4316 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4317 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4318 (NEXTDOUBLE): Likewise.
4319 (print_insn_m68k): Don't match fmoveml if there is more than one
4320 register in the list.
4321 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4323 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4325 * m68k-opc.c: Use #W rather than #w.
4326 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4328 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4330 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4331 and likewise for all the dbxx opcodes.
4333 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4335 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4337 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4339 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4340 the VR4100 specific instructions to the mips_opcodes structure.
4342 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4344 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4345 ugly Metrowerks bug in CW6, is fixed in CW7.
4347 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4349 * ppc-opc.c (whole file): Add flags for common/any support.
4351 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4353 * Makefile.in (BISON): Remove macro.
4354 (FLAGS_TO_PASS): Remove BISON.
4356 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4358 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4360 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4361 instructions that take no args by looking at the match mask.
4362 (print_insn_arg): Always print "%" before register names.
4363 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4364 [case '_']: Don't print "@#" before address.
4365 [case 'J']: Use "%s" as format string, not register name.
4366 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4368 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4370 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4373 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4375 From David Mosberger-Tang <davidm@azstarnet.com>
4377 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4378 (alpha_insn_set): added definitions for VAX floating point
4379 instructions (Unix compilers don't generate these, but handcoded
4380 assembly might still use them).
4382 * alpha-dis.c (print_insn_alpha): added support for disassembling
4383 the miscellaneous instructions in the Alpha instruction set.
4385 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4387 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4388 no longer create sysdep.h, sed ppc-opc.c to work around a
4389 serious Metrowerks C bug.
4390 * mpw-make.in: Remove.
4391 * mpw-make.sed: New file, used by mpw-configure to edit
4392 Makefile.in into an MPW makefile.
4394 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4396 * Makefile.in (maintainer-clean): New synonym for realclean.
4398 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4400 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4401 which use '0', '1', and '2' instead. Specify the proper size for
4402 a pmove immediate operand. Correct the pmovefd patterns to be
4403 moves to a register, not from a register.
4404 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4406 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4408 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4409 %psr, %wim, %tbr as F_NOTV9.
4411 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4413 * Makefile.in (Makefile): Just rebuild Makefile when running
4415 (config.h, stamp-h): New targets.
4416 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4417 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4418 rebuilding config.h.
4419 * configure: Rebuild.
4421 * mips-opc.c: Change unaligned loads and stores with "t,A"
4422 operands to use "t,A(b)".
4424 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4426 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4428 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4430 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4431 until 3 instead of until 2.
4433 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4435 * Makefile.in (ALL_CFLAGS): Define.
4436 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4437 (MOSTLYCLEAN): Add config.log.
4438 (distclean): Don't remove config.log.
4439 * configure.in: Substitute HDEFINES.
4440 * configure: Rebuild.
4442 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4444 * sh-opc.h (sh_arg_type): Add F_FR0.
4445 (sh_table, case fmac): Add F_FR0 as first argument.
4447 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4449 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4451 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4453 * sparc-dis.c: Remove all references to NO_V9.
4455 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4457 * aclocal.m4: Just include ../bfd/aclocal.m4.
4458 * configure: Rebuild.
4460 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4462 * sparc-dis.c (X_DISP19): Define.
4463 (print_insn, case 'G'): Use it.
4464 (print_insn, case 'L'): Sign extend displacement.
4466 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4468 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4469 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4470 host_makefile_frag or frags.
4471 * aclocal.m4: New file.
4472 * configure: Rebuild.
4473 * Makefile.in (INSTALL): Set to @INSTALL@.
4474 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4475 (INSTALL_DATA): Set to @INSTALL_DATA@.
4477 (AR_FLAGS): Set to rc rather than qc.
4478 (CC): Define as @CC@.
4479 (CFLAGS): Set to @CFLAGS@.
4480 (@host_makefile_frag@): Remove.
4481 (config.status): Remove dependency upon @frags@.
4483 * configure.in: ../bfd/config.bfd now just sets shell variables.
4484 Use them rather than looking through target Makefile fragments.
4485 * configure: Rebuild.
4487 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4489 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4491 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4493 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4494 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4497 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4498 (lookup_{name,value}): New functions.
4499 (prefetch_table): New static local.
4500 (sparc_{encode,decode}_prefetch): New functions.
4501 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4503 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4505 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4508 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4510 * sh-dis.c: Correct comment on first line of file.
4512 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4514 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4516 * sparc-opc.c (asi, membar): New static locals.
4517 (sparc_{encode,decode}_{asi,membar}): New functions.
4518 (sparc_opcodes, membar insn): Fix.
4519 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4520 Support decoding of membar masks.
4523 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4525 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4527 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4529 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4530 and likewise for the other branches. Add bhs as an alias for bcc,
4531 and likewise for the size variants. Add dbhs as an alias for
4534 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4536 * sh-opc.h (FP sts instructions): Update to match reality.
4538 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4540 * m68k-dis.c: (fpcr_names): Add % before all register names.
4541 (reg_names): Likewise.
4542 (print_insn_arg): Don't explicitly print % before register names.
4543 Add % before register names in static array names. In case 'r',
4544 print data registers as `@(Dn)', not `Dn@'. When printing a
4545 memory address, don't print @# before it.
4546 (print_indexed): Change base_disp and outer_disp from int to
4547 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4548 syntax. Sign extend 8 byte displacement correctly.
4549 (print_base): Print using MIT syntax. Print zpc when appropriate.
4550 Change parameter disp from int to bfd_vma.
4552 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4555 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4557 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4558 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4559 * sh-opc.h (sh_arg_type): Add new operand types.
4560 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4562 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4564 * Makefile.in (distclean): Remove generated file config.h.
4566 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4568 * Makefile.in (distclean): Remove generated file config.h.
4570 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4572 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4574 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4576 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4577 rather than numopcodes. Use m68k_opcodes rather than removed
4578 opcode function. Don't check F_ALIAS.
4579 (print_insn_arg): Change first parameter to be const char *.
4580 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4581 (m68k-opc.o): New target.
4582 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4583 * configure: Rebuild.
4585 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4587 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4588 (opcode_bits, opcode_hash_table): New variables.
4589 (opcodes_initialized): Renamed from opcodes_sorted.
4590 (build_hash_table): New function.
4591 (is_delayed_branch): Use hash table.
4592 (print_insn): Renamed from print_insn_sparc, made static.
4593 Build and use hash table. If !sparc64, ignore sparc64 insns,
4594 and vice-versa if sparc64.
4595 (print_insn_sparc, print_insn_sparc64): New functions.
4596 (compare_opcodes): Move sparc64 opcodes to end.
4597 Print commutative insns with constant second.
4598 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4600 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4602 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4603 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4604 avoids printing a delay slot in a delay slot.
4605 * sh-opc.h (sh_table): Fully bracket last entry.
4607 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4609 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4611 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4613 * configure.in: Get host_makefile_frag from ${srcdir}.
4615 * configure.in: Autoconfiscated. Check for string[s].h. Create
4616 config.h from config.in. Don't set up sysdep.h link.
4617 * sysdep.h: New file.
4618 * configure, config.in: New files, generated from configure.in.
4619 * Makefile.in: Updated to be processed autoconf-style.
4620 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4621 (Makefile): Depend on config.status.
4622 (config.status): New rule.
4623 * configure.bat: Update Makefile substitutions.
4625 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4627 * mips-opc.c (L1): Define.
4628 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4629 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4632 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4634 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4635 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4636 have multiple add units but only a single logical unit.
4638 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4639 shifted by 18, without any insertion or extraction function.
4640 (insert_cr, extract_cr): Remove.
4642 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4644 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4647 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4649 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4650 * sh-opc.h: Add copyright.
4652 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4654 * Makefile.in (crunch-m68k): Delete extra target accidentally
4655 checked in a while ago.
4657 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4659 * sh-opc.h (sh_table): Add SH3 support.
4661 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4663 * sh-opc.h: Added bsrf and braf.
4665 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4667 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4668 bogus [ls]fm{ea,fd} patterns.
4670 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4671 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4672 initialize it from memory. Make function static.
4673 (print_insn_{big,little}_arm): New functions.
4674 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4675 the correct endianness.
4677 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4679 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4682 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4684 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4685 17th, so that it builds again using GCC as the compiler.
4687 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4689 * mips-dis.c (print_insn_little_mips): Cast return value from
4690 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4691 expects an unsigned long, and that might be fewer words of
4692 argument storage (e.g., if bfd_vma is long long on a 32-bit
4694 (print_insn_big_mips): Likewise with bfd_getb32 value.
4695 (_print_insn_mips): Now static.
4697 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4699 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4700 gcc memory hog problem with initializer is fixed.
4702 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4704 Merge in support for Mac MPW as a host.
4705 (Old change descriptions retained for informational value.)
4707 * mpw-config.in (archname): Compute from the config.
4708 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4710 * mpw-config.in (target_arch): Compute from canonical target.
4711 (m68k, mips, powerpc, sparc): Add architectures.
4712 * mpw-make.in (disassemble.c.o): Add.
4713 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4715 * mpw-config.in (BFD_MACHINES): Set to a default value.
4716 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4718 * mpw-make.in (CSEARCH): Add extra-include to search path.
4720 * mpw-config.in (varargs.h): Don't create.
4721 (sysdep.h): Create using forward-include.
4722 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4724 * mpw-config.in: New file, MPW version of configure.in.
4725 * mpw-make.in: New file, MPW version of Makefile.in.
4727 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4729 * alpha-dis.c (print_insn_alpha): Put empty statement after
4732 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4734 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4735 (low_sign_extend): Likewise.
4736 (get_field): Delete unused function.
4737 (set_field, deposit_14, deposit_21): Likewise.
4739 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4741 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4744 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4746 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4748 * alpha-opc.h (OSF_ASMCODE): define
4749 print pal-code names as defined in App C of the
4750 Alpha Architecture Reference Manual
4752 * alpha-dis.c: cleaned up output
4753 print stylized code forms as defined in App A.4.3 of the
4754 Alpha Architecture Reference Manual
4756 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4758 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4760 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4763 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4765 * m68k-dis.c (opcode): New function. Returns address of opcode
4766 table entry given index, even if the opcode table was split to
4767 work around gcc bugs.
4768 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4770 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4771 (reg_names): Now const.
4772 (print_insn_arg): Arrays cacheFieldName and names now const.
4773 (print_indexed): Array scales now const.
4775 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4777 * ppc-opc.c: Sort recently added instructions by minor opcode
4778 number within major opcode number.
4780 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4782 * hppa-dis.c: Include libhppa.h.
4784 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4786 * mips-opc.c: Change dli to use M_DLI, and add dla.
4788 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4790 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4792 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4794 * mips-opc.c: Add r4650 mul instruction.
4796 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4798 * mips-opc.c: Add uld and usd macros for unaligned double load and
4801 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4803 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4804 mfdcr, mtdcr, icbt, iccci.
4806 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4808 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4809 signed char fields to shorts, more portable.
4811 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4813 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4814 char fields as signed chars, since they may have negative values.
4816 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4818 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4819 (mycroft@netbsd.org).
4821 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4823 From "Logg, Ed" <elogg@ea.com>:
4824 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4825 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4828 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4830 * ppc-opc.c: Changes based on patch from David Edelsohn
4831 <edelsohn@mhpcc.edu>.
4832 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4835 (insert_tbr): New static function.
4836 (extract_tbr): New static function.
4837 (XFXFXM_MASK, XFXM): Define.
4838 (XSPRBAT_MASK, XSPRG_MASK): Define.
4839 (powerpc_opcodes): Add instructions to access special registers by
4840 name. Add mtcr and mftbu.
4842 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4844 * mips-opc.c (P3): Define.
4845 (mips_opcodes): Add mad and madu.
4847 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4849 * configure.in: Add W65 support.
4850 * disassemble.c: Likewise.
4851 * w65-opc.h, w65-dis.c: New files.
4853 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4855 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4858 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4860 * mips-opc.c: Add dli as a synonym for li.
4862 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4864 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4865 print something for reserved opcode values, even if it won't
4868 * mips-dis.c (_print_insn_mips): When initializing, shift right
4869 and mask, to avoid sign extension problems on the Alpha.
4871 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4874 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4876 * sh-opc.h (mov.l gbr): Get direction right.
4877 * sh-dis.c (print_insn_shx): New function.
4878 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4879 print opcodes with right byte order.
4881 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4883 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4884 to avoid conflicts with getopt.
4886 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4888 * hppa-dis.c (print_insn_hppa): Read the instruction using
4889 bfd_getb32, so that it works on a little endian or 64 bit host.
4890 Remove unused local variable op.
4892 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4894 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4895 addu does not work correctly if -mips3.
4897 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4899 * a29k-dis.c (print_special): Add special register names defined
4900 on 29030, 29040 and 29050.
4901 (print_insn): Handle new operand type 'I'.
4903 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4905 * Makefile.in (INSTALL): Use top level install.sh script.
4907 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4909 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4910 that it works on a little endian host.
4912 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4914 * configure.in: Use ${config_shell} when running config.bfd.
4916 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4918 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4920 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4922 * a29k-dis.c (print_insn): Print the opcode.
4924 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4926 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4928 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4930 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4932 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4934 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4935 which store a value into memory.
4937 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4939 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4940 * arm-dis.c, arm-opc.h: New files.
4942 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4944 * Makefile.in (ns32k-dis.o): Add dependency.
4945 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4946 string, not as array of chars.
4948 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4950 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4952 * sparc-opc.c: Added sparclite extended FP operations, and
4953 versions of v9 impdep* instructions permitting specification of
4956 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4958 * i960-dis.c (reg_names): Now const.
4959 (struct sparse_tabent): New type, copied from array type in mem
4961 (ctrl): Local static array ctrl_tab now const.
4962 (cobr): Local static array cobr_tab now const.
4963 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4964 static variable mem_tab no longer explicitly initialized. Changed
4965 mem_init to const array of struct sparse_tabent.
4966 (reg): Local static variable reg_tab no longer explicitly
4967 initialized. Changed reg_init to const array of struct
4969 (ea): Local static array scale_tab now const.
4971 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4974 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4976 * configure.bat: the disassember needs to be enabled for
4977 "objdump -d" to work in djgpp.
4979 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4981 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4982 (invalid_float): Enabled general version, doesn't require running
4983 on ns32k host. Changed to take char* argument, and test for
4984 explicitly specified sizes, instead of using sizeof() on host CPU
4986 (INVALID_FLOAT): Cast first argument.
4987 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4988 list_P032, list_M032): Now const.
4989 (optlist, list_search): Made appropriate arguments now point to
4991 (print_insn_arg): Changed static array of one-character-string
4992 pointers into a static const array of characters; fixed sprintf
4993 statement accordingly.
4995 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4997 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4998 from distribution. A ns32k-dis.c from a previous distribution has
4999 been brought up to date and supports the new interface.
5001 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5003 * configure.in: add bfd_ns32k_arch target support.
5005 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5006 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5008 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5010 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5013 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5015 * h8300-dis.c, mips-dis.c: Don't use true and false.
5017 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5019 * configure.in: Change --with-targets to --enable-targets.
5021 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5023 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5024 opcodes to the first instruction with that opcode, to speed
5025 disassembly of large files. From ralphc@pyramid.com (Ralph
5028 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5032 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5034 * configure.bat: update to latest makefile.in
5036 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5038 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5039 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5040 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5041 slot insn is in a delay slot.
5042 * z8k-opc.h: (resflg): Fix patterns.
5043 * h8500-opc.h Fix CR insn patterns.
5045 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5047 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5048 "cmpl" before POWER versions, so that gas -many uses them.
5050 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5052 * disassemble.c: New file.
5053 * Makefile.in (OFILES): Add disassemble.o.
5054 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5055 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5056 binutils/configure.in.
5058 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5059 opcode being examined.
5061 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5063 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5064 (insert_ral, insert_ram, insert_ras): New functions.
5065 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5066 RAS for store with update.
5068 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5071 (edelsohn@npac.syr.edu).
5073 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5078 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5080 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5082 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5084 * ppc-opc.c (powerpc_operands): The signedp field has been
5085 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5086 instead. Add new operand SISIGNOPT.
5087 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5088 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5089 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5092 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5094 * i386-dis.c (struct private): Renamed to dis_private. `private'
5095 is a reserved word for dynix cc.
5097 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * configure.in: Change error message to refer to bfd/config.bfd
5100 rather than bfd/configure.in.
5102 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5104 * ppc-opc.c: Define POWER2 as short alias flag.
5105 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5108 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5110 * i960-dis.c (print_insn_i960): Don't read a second word for
5111 opcodes 0, 1, 2 and 3.
5113 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5115 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5117 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5119 * m68881-ext.c: Removed; no longer used.
5120 * Makefile.in: Changed accordingly.
5122 * m68k-dis.c (ext_format_68881): Don't declare.
5123 (print_insn_m68k): If an instruction uses place 'i', it uses at
5124 least four fixed bytes.
5125 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5126 extended float, convert to double using floatformat_to_double, not
5127 ieee_extended_to_double, and fetch the data before converting it.
5129 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5132 davidj@ICSI.Berkeley.EDU (David Johnson).
5134 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5136 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5137 PowerPC uses bdnz[l][a].
5139 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5141 * dis-buf.c, i386-dis.c: Include sysdep.h.
5143 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5145 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5147 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5148 by Motorola PowerPC 601 with PPC_OPCODE_601.
5149 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5150 Disassemble Motorola PowerPC 601 instructions as well as normal
5151 PowerPC instructions.
5153 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5155 * i960-dis.c (reg, mem): Just use a static array instead of
5158 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5160 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5161 condition name index if this is for a negated condition.
5163 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5164 Floating point format for 'H' operand is backwards from normal
5165 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5166 operands (fmpyadd and fmpysub), handle bizarre register
5167 translation correctly for single precision format.
5169 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5170 or 'I' operands if the next format specifier is 'M' (fcmp
5171 condition completer).
5173 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5175 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5176 single number giving a bitmask for the MB and ME fields of an M
5177 form instruction. Change NB to accept 32, and turn it into 0;
5178 also turn 0 into 32 when disassembling. Seperated SH from NB.
5179 (insert_mbe, extract_mbe): New functions.
5180 (insert_nb, extract_nb): New functions.
5181 (SC_MASK): Mask out SA and LK bits.
5182 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5183 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5184 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5185 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5186 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5187 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5188 (powerpc_macros): Define table of macro definitions.
5189 (powerpc_num_macros): Define.
5191 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5192 if PPC_OPERAND_NEXT is set.
5194 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5196 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5197 char. Retrieve contents using bfd_getl32 instead of shifting.
5199 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5201 * ppc-opc.c: New file. Opcode table for PowerPC, including
5202 opcodes for POWER (RS/6000).
5203 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5204 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5205 (CFILES): Add ppc-dis.c.
5206 (ppc-dis.o, ppc-opc.o): New targets.
5207 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5209 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5211 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5212 No space before 'u', 'f', or 'N'.
5214 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5216 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5217 farther than we should.
5219 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5221 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5223 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5225 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5227 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5228 needs it, to prevent reading past the end of a section.
5230 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5232 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5233 Removed t,A case for la; always use t,A(b) case.
5235 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5237 From Ted Lemen <mellon@pepper.ncd.com>
5238 * mips-dis.c (print_insn_arg): Handle 'k'.
5239 * mips-opc.c: Make cache use k, not t.
5241 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5243 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5244 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5245 FLOAT_FORMAT_CODE to put out floating point register names.
5247 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5249 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5251 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5253 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5255 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5257 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5258 larger than 32. Moved dsxx32 variants first for disassembler.
5260 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5262 * z8kgen.c, z8k-opc.h: Add full lda information.
5264 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5266 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5267 movb instructions. Any necessary space will be emitted by
5268 the code to handle nullification completers.
5270 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5272 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5274 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5276 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5277 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5279 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5281 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5283 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5285 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5286 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5288 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5290 * m88k-dis.c (m88kdis): comment change. Remove space after
5292 (printop): handle new arg types DEC and XREG for m88110.
5294 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5296 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5297 type for absolute branch addresses. Delete special
5298 "ble" and "be" code in 'W' operand code.
5300 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5302 * mips-opc.c: Set hazard information correctly for branch
5303 likely instructions.
5305 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5307 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5308 info->fprintf_func for printing and info->print_address_func for
5311 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5313 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5315 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5317 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5318 Corrected second case of "b" for disassembler.
5320 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5322 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5323 to BFD swapping routines to correspond to BFD name changes.
5325 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5327 * mips-opc.c: Change div machine instruction to be z,s,t rather
5328 than s,t. Change div macro to be d,v,t rather than d,s,t.
5329 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5330 rem and remu which generates only the corresponding div
5331 instruction. This is for compatibility with the MIPS assembler,
5332 which only generates the simple machine instruction when an
5333 explicit destination of $0 is used.
5334 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5336 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5338 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5339 WR_31 hazard for bal, bgezal, bltzal.
5341 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5343 * hppa-dis.c (print_insn_hppa): Use print function
5344 from within the disassemble_info, not fprintf_filtered.
5346 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5348 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5349 Law, law@cs.utah.edu.)
5351 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5353 * mips-opc.c ("absu"): Removed.
5356 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5358 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5359 Changed hazard information to distinguish between memory load
5360 delays and coprocessor load delays.
5362 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5364 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5366 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5368 * configure.in: Don't pass cpu to config.bfd.
5370 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5372 * m88k-dis.c (m88kdis): Make class unsigned.
5374 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5376 * alpha-dis.c (print_insn_alpha): One branch format case was
5377 missing the instruction name.
5379 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5381 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5382 Add the arch-specific auxiliary files.
5383 (OFILES): Remove the arch-specific auxiliary files
5384 and use BFD_MACHINES instead of DIS_LIBS.
5385 * configure.in: Set BFD_MACHINES based on --with-targets option.
5387 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5389 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5392 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5394 * sparc-opc.c: Change CONST to const to deal with gcc
5395 -Dconst=__const -traditional.
5397 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5399 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5400 coprocessor instructions out of #if 0, and made them use new
5403 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5405 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5407 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5409 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5410 instruction, for use by the disassembler.
5412 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5413 hand-coded sign extensions that depended on 32-bit host ints.
5414 FIXME, we still depend on big-endian host bitfield ordering.
5415 (sparc_print_insn): Set the insn_info_valid field, and the
5416 other fields that describe the instruction being printed.
5418 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5420 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5421 `jmp' instead of just one of them.
5423 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5425 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5426 (fput_fp_reg_r): Renamed from fput_reg_r.
5427 (fput_fp_reg): New function.
5428 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5430 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5432 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5434 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5436 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5438 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5439 don't output a space.
5441 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5443 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5445 * mips-opc.c: New file, containing opcode table from
5446 ../include/opcode/mips.h.
5447 * Makefile.in: Add it.
5449 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5451 * m88k-dis.c: New file, moved in from gdb and changed to use the
5452 new dis-asm.h disassembler interface.
5453 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5454 (m88k-dis.o): New target.
5456 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5458 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5459 argument string const char * to correspond to opcode/mips.h.
5461 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5463 * mips-dis.c: Updated to account for name changes in new version
5465 * Makefile.in: Added header file dependencies.
5467 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5469 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5471 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5473 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5474 extend, rather than shifts.
5476 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5478 * Makefile.in: Undo 15 June change.
5480 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5482 * m68k-dis.c (print_insn_arg): Change return value to byte count
5484 * m68k-dis.c: Re-write to detect invalid operands before
5485 printing anything, so we can handle this the same way we
5486 handle invalid opcodes.
5488 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5490 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5492 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5494 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5497 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5499 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5501 * configure.in: Do make sysdep.h link.
5502 * Makefile.in: Search ../include. Don't search ../bfd.
5504 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5506 Changes from Jeff Law, law@cs.utah.edu:
5507 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5508 Do not print a space before the completers specified by
5511 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5513 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5514 defined, since gdb has been fixed.
5516 Changes from Jeff Law, law@cs.utah.edu:
5517 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5518 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5519 be a *disassemble_info, not a *FILE.
5520 * hppa-dis.c: Support 'd', '!', and 'a'.
5521 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5522 * hppa-dis.c: Delete cases which are no longer needed.
5524 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5526 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5528 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5530 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5533 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5535 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5536 * configure.in: No longer need to configure to get sysdep.h.
5538 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5540 * Patches from Jeffrey Law <law@cs.utah.edu>.
5541 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5542 templates for 1.1 FP computational instructions.
5544 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5546 * h8500-dis.c (print_insn_h8500): Address argument is type
5548 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5551 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5552 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5554 * sparc-dis.c (compare_opcodes): Move static declaration to
5557 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5559 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5560 instruction, remove unimp hack from 'l' argument.
5562 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5564 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5567 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5569 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5570 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5573 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5575 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5576 arrays of string pointers to 2-d arrays of chars, to save
5579 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5581 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5582 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5584 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5586 * hppa-dis.c: New file from Utah, adapted to new disassembler
5588 * Makefile.in: Include it.
5590 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5592 * sh-dis.c, sh-opc.h: New files.
5594 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5596 * alpha-dis.c, alpha-opc.h: New files.
5598 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5600 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5603 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5605 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5607 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5609 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5612 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5614 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5615 and double percent signs a few places.
5617 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5619 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5620 Use info->print_address_func not print_address.
5622 * dis-buf.c (generic_print_address): New function.
5624 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5626 * Makefile.in: Add sparc-dis.c.
5627 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5629 Add `add' instruction to the set that get checked
5630 for a preceding `sethi' in order to print an absolute address.
5631 * (print_insn): Disassembly prefers real instructions.
5632 (is_delayed_branch): Speed up.
5633 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5634 Still missing some float ops, and needs testing.
5635 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5636 F_ALIAS. Use printf, not fprintf, when not passing a file
5638 (compare_opcodes): Check that identical instructions have
5639 identical opcodes, complain otherwise.
5642 * Include reg_names.
5644 Use dis-asm.h/read_memory_func interface.
5646 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5648 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5649 deliberately return non-zero to setjmp from longjmp. Otherwise
5650 this code fails to compile.
5652 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5654 * m68k-dis.c: Fix prototype for fetch_arg().
5656 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5658 * dis-buf.c: New file, for new read_memory_func interface.
5659 Makefile.in (OFILES): Include it.
5660 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5661 Use new read_memory_func interface.
5663 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5665 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5666 * h8500-opc.h: Fix couple of opcodes.
5668 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5670 * Makefile.in: add dvi & installcheck targets
5672 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5674 * Makefile.in: Update for h8500-dis.c.
5676 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5678 * h8500-dis.c, h8500-opc.h: New files
5680 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5682 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5683 ../include/dis-asm.h.
5684 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5685 and ../gdb/m68k-pinsn.c).
5686 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5687 and ../gdb/i386-pinsn.c).
5688 * m68881-ext.c: New file. Moved definition of
5689 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5690 * Makefile.in: Adjust for new files.
5691 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5692 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5693 can be dis-assembled.
5695 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5697 * mips-dis.c (print_insn_arg): Now returns void.
5699 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5701 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5702 files that use the macros.
5704 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5706 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5707 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5708 (CFILES): Added mips-dis.c.
5710 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5712 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5713 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5715 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5717 * Makefile.in: Improve *clean rules.
5718 * configure.in: Allow a default host.
5720 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5722 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5723 files include other sysdep files
5725 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5727 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5729 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5731 * configure.in: For host support, use ../bfd/configure.host
5732 so it stays in sync with the ../bfd/hosts database.
5734 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5736 * configure.in: use cpu-vendor-os triple instead of nested cases
5738 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5740 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5741 *always* the wrong one.
5743 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5745 * z8kgen.c: added copyright info
5747 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5749 * z8k-dis.c (unparse_instr): prettier tabs
5750 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5752 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5754 * configure.in: Add ncr* configuration.
5755 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5756 picayune ANSI compilers happy.
5758 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5760 * configure.in (i386): Make i386 and i486 synonymous for now.
5761 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5763 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5765 * Makefile.in (install): Fix typo.
5767 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5769 * Makefile.in (make): Remove obsolete crud.
5770 (sparc-opc.o): Avoid Sun Make VPATH bug.
5772 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5774 * Makefile.in: since there are no SUBDIRS, remove rule and
5775 references of subdir_do.
5777 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5779 * Makefile.in (install): Get the library name right here too.
5780 Don't install bfd.h, since it's unrelated to this library. No
5781 subdirs to recurse into, either.
5782 (CFILES): The source file has a .c suffix, not .o.
5784 * sparc-opc.c: New file, moved from BFD.
5785 * Makefile.in (OFILES): Build it.
5787 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5789 * z8k-dis.c: fixed forward refferences of some declarations.
5791 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5793 * Makefile.in: get the name of the library right
5795 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5797 * z8k-dis.c: knows how to disassemble z8k stuff
5798 * z8k-opc.h: new file full of z8000 opcodes
5802 version-control: never