1 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
3 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
4 * Makefile.in: Regenerated.
6 1999-06-03 Philip Blundell <philb@gnu.org>
8 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
9 when target is PC-relative.
11 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
13 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
16 * m68k-dis.c (fetch_arg): Add places `n', `o'.
18 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
19 Add mcf5206e to appropriate instructions.
20 Add alias for MAC, MSAC.
22 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
25 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
26 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
28 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
30 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
32 * i386-dis.c (Ed): Define.
33 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
35 (OP_rm): Rename to OP_Rd.
38 (putop): Add const to template and p.
39 (print_insn_x86): Delete.
40 (print_insn_i386): Merge old function print_insn_x86. Add const
42 (struct dis386): Add const to name.
43 (dis386_att, dis386_intel): Add const.
44 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
45 (names32, names16, names8, names_seg, index16): Add const.
46 (grps, prefix_user_table, float_reg): Add const.
47 (float_mem_att, float_mem_intel): Add const.
48 (oappend): Add const to s.
49 (OP_REG): Add const to s.
50 (ptr_reg): Add const to s.
51 (dofloat): Add const to dp.
52 (OP_C): Don't skip modrm, it's now done in OP_Rd.
55 (OP_Rd): Check for valid mod. Call Op_E to print.
56 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
57 (OP_MS): Check for valid mod. Call Op_EM to print.
58 (OP_3DNowSuffix): Set obufp and use oappend rather than
59 strcat. Call BadOp() for errors.
60 (OP_SIMD_Suffix): Likewise.
61 (BadOp): New function.
63 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
65 * i386-dis.c (dis386_intel): Remove macro chars, except for
66 jEcxz. Change cWtR and cRtd to cW and cR.
67 (dis386_twobyte_intel): Remove macro chars here too.
68 (putop): Handle R and W macros for intel mode.
70 * i386-dis.c (SIMD_Fixup): New function.
71 (dis386_twobyte_att): Use it on movlps and movhps, and change
72 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
73 (dis386_twobyte_intel): Same here.
75 * i386-dis.c (Av): Remove.
79 (OP_SIMD_Suffix): New function.
80 (OP_DIR): Remove dead code.
81 (eAX_reg..eDI_reg): Renumber.
82 (onebyte_has_modrm): Table numbering comments.
83 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
84 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
85 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
86 and handle SIMD cmp insns in OP_SIMD_Suffix.
87 (info->bytes_per_line): Bump from 5 to 6.
89 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
90 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
92 PIII SIMD support from Doug Ledford <dledford@redhat.com>
93 * i386-dis.c (XM, EX, None): Define.
94 (OP_XMM, OP_EX, OP_None): New functions.
95 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
96 (GRP14): Rename to GRPAMD.
97 (GRP*): Add USE_GROUPS flag.
99 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
100 (twobyte_has_modrm): Add SIMD entries.
101 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
102 (grps): Add SIMD insns.
103 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
104 oappend repz if uses_f3_prefix. Add code to handle new groups for
107 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
108 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
109 operand from Av to Jv.
111 1999-05-07 Nick Clifton <nickc@cygnus.com>
113 * mcore-dis.c (print_insn_mcore): Use .short to display
114 unidentified instructions, not .word.
116 1999-04-26 Tom Tromey <tromey@cygnus.com>
118 * aclocal.m4, configure: Updated for new version of libtool.
120 1999-04-14 Doug Evans <devans@casey.cygnus.com>
122 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
123 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
125 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
127 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
130 1999-04-10 Doug Evans <devans@casey.cygnus.com>
132 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
133 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
135 1999-04-06 Ian Lance Taylor <ian@zembu.com>
137 * opintl.h (LC_MESSAGES): Never define.
139 1999-04-04 Ian Lance Taylor <ian@zembu.com>
141 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
142 (separator_char, scale_char): Likewise.
143 (print_insn_x86): Likewise.
144 (print_insn_i386): Likewise. Add declaration.
146 1999-03-26 Doug Evans <devans@casey.cygnus.com>
148 * fr30-dis.c: Rebuild.
149 * m32r-dis.c: Rebuild.
151 1999-03-23 Ian Lance Taylor <ian@zembu.com>
153 * m68k-opc.c: Change compare instructions to use "@s" rather than
154 ";s" when used with an immediate operand.
156 1999-03-22 Doug Evans <devans@casey.cygnus.com>
158 * cgen-opc.c (cgen_set_cpu): Delete.
159 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
160 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
162 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
164 * po/opcodes.pot: Rebuild.
166 1999-03-16 Martin Hunt <hunt@cygnus.com>
168 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
170 1999-03-11 Doug Evans <devans@casey.cygnus.com>
172 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
173 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
174 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
175 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
176 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
177 * m32r-opinst.c: Rebuild.
179 1999-02-25 Doug Evans <devans@casey.cygnus.com>
181 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
182 (cgen_hw_lookup_by_num): Rewrite.
183 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
184 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
185 * m32r-opinst.c: Rebuild.
187 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
189 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
190 (insert_jhint): Fix insertion mask.
191 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
193 1999-02-10 Doug Evans <devans@casey.cygnus.com>
195 * Makefile.in: Rebuild.
197 1999-02-09 Doug Evans <devans@casey.cygnus.com>
199 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
200 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
201 * Makefile.am: Remove references to them.
202 (HFILES): Add fr30-desc.h,m32r-desc.h.
203 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
205 (ALL_MACHINES): Update.
206 * configure.in: Redo handling of cgen_files.
207 (bfd_i960_arch): Delete i960c-*.lo files.
208 * configure: Regenerate.
209 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
210 (hash_insn_array): Rewrite.
211 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
212 (hash_insn_array): Rewrite.
213 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
214 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
215 (cgen_lookup_get_insn_operands): Ditto.
216 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
217 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
218 * po/POTFILES.in: Rebuild.
219 * po/opcodes.pot: Rebuild.
221 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
223 * Makefile.am: Rebuild dependencies.
224 (HFILES): Add fr30-opc.h.
225 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
226 * Makefile.in: Rebuild.
228 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
229 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
231 * acconfig.h: Remove.
232 * configure: Rebuild with current autoconf/automake.
233 * aclocal.m4: Likewise.
234 * config.in: Likewise.
235 * Makefile.in: Likewise.
237 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
239 * m68k-opc.c: Correct move (not movew) to status word on 5200.
241 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
243 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
244 * i386-dis.c (x_mode): Define.
248 (dis386_twobyte): Remove.
249 (dis386_twobyte_att): New.
250 (dis386_twobyte_intel): New.
251 (print_insn_x86): Use new arrays.
253 (float_mem_intel): New.
254 (float_mem_att): New.
255 (dofloat): Use new float_mem arrays.
256 (print_insn_i386_att): New.
257 (print_insn_i386_intel): New.
258 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
259 (putop): Handle intel syntax.
260 (OP_indirE): Handle intel syntax.
261 (OP_E): Handle intel syntax.
262 (OP_I): Handle intel syntax.
263 (OP_sI): Handle intel syntax.
264 (OP_OFF): Handle intel syntax.
268 1999-01-27 Doug Evans <devans@casey.cygnus.com>
270 * fr30-opc.h,fr30-opc.c: Rebuild.
271 * i960c-opc.h,i960c-opc.c: Rebuild.
272 * m32r-opc.c: Rebuild.
274 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
276 * hppa-dis.c: revert HP merge changes until HP gives us
279 1999-01-19 Nick Clifton <nickc@cygnus.com>
281 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
282 offsets as well as symbloic address.
284 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
286 * hppa-dis.c: fix comments and some indentation.
288 1999-01-12 Doug Evans <devans@casey.cygnus.com>
290 * fr30-opc.c,i960c-opc.c: Regenerate.
292 1999-01-11 Doug Evans <devans@casey.cygnus.com>
294 * fr30-opc.c: Regenerate.
296 1999-01-06 Doug Evans <devans@casey.cygnus.com>
298 * m32r-dis.c: Regenerate.
300 1999-01-05 Doug Evans <devans@casey.cygnus.com>
302 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
303 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
304 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
306 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
308 * configure.in: Require autoconf 2.12.1 or higher.
310 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
312 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
314 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
316 * fr30-opc.c: Regenerated.
318 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
320 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
322 1998-12-15 Dave Brolley <brolley@cygnus.com>
324 * fr30-opc.c,fr30-opc.h: Regenerated.
326 1998-12-14 Dave Brolley <brolley@cygnus.com>
328 * fr30-opc.c,fr30-opc.h: Regenerated.
330 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
332 * fr30-opc.c,fr30-opc.h: Regenerated.
334 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
336 * m32r-opc.c: Regenerate.
338 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
340 * dis-buf.c (generic_strcat_address): reformat to GNU coding
341 conventions. change sprintf call to an sprintf_vma call.
343 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
345 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
347 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
349 The following changes were made by
350 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
351 David Taylor <taylor@texas.cygnus.com>, and
352 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
353 merge in changes by HP; HP did not create ChangeLog entries.
355 * dis-buf.c (generic_strcat_address): new function.
357 * hppa-dis.c: Changes to improve hppa disassembly.
358 Changed formatting in : reg_names, fp_reg_names,control_reg,
359 New variables : sign_extension_names, deposit_names, conversion_names
360 float_test_names, compare_cond_names_double, add_cond_names_double,
361 logical_cond_names_double, unit_cond_names_double,
362 branch_push_pop_names, saturation_names, shift_names, mix_names,
363 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
364 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
365 (fput_const): renamed as fput_hex_const
367 - use the macros fputs_filtered and
368 fput_decimal_const whenever possible; calls to sign_extend require
369 2 params -- add a missing second param of 0.
370 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
371 architecture version number of current machine. HP folks are
372 trying to handle situation where the target program was compiled
373 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
375 - added new cases : 'g', 'B', 'm'
376 - added cases specifically for PA 2.0
377 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
378 - calls to fput_const become calls to fput_hex_const
380 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
382 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
383 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
384 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
385 * Makefile.in: Rebuilt.
386 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
388 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
389 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
391 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
393 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
395 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
397 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
399 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
400 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
402 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
404 * fr30-opc.c: Regenerate.
406 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
408 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
410 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
412 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
414 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
416 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
418 1998-11-30 Doug Evans <devans@casey.cygnus.com>
420 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
421 CGEN_INSN_BASE_VALUE.
422 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
423 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
425 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
427 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
429 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
431 * fr30-asm.c,fr30-dis.c: Regenerated.
433 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
435 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
437 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
439 * fr30-opc.c: Regenerated.
441 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
443 * fr30-opc.c: Regenerated.
444 * fr30-opc.h: Regenerated.
445 * fr30-dis.c: Regenerated.
446 * fr30-asm.c: Regenerated.
448 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
450 * mips-opc.c (sync.p,sync.l): Swap insn values.
452 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
454 * fr30-opc.c: Regenerate.
456 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
458 * fr30-opc.c: Regenerated.
459 * fr30-opc.h: Regenerated.
461 1998-11-18 Doug Evans <devans@casey.cygnus.com>
463 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
464 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
466 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
468 * fr30-opc.c: Regenerated.
470 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
472 * fr30-opc.c: Regenerated.
473 * fr30-opc.h: Regenerated.
474 * fr30-dis.c: Regenerated.
475 * fr30-asm.c: Regenerated.
477 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
479 * po/opcodes.pot: Regenerated.
480 * fr30-opc.c: Regenerated.
481 * fr30-opc.h: Regenerated.
482 * fr30-dis.c: Regenerated.
483 * fr30-asm.c: Regenerated.
485 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
487 * disassemble.c (disassembler): Add support for FR30 target.
489 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
491 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
492 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
494 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
496 * po/opcodes.pot: Regenerate.
497 * po/POTFILES.in: Regenerate.
498 * fr30-opc.c: Regenerate.
499 * fr30-opc.h: Regenerate.
501 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
503 * m32r-asm.c: Regenerate.
505 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
507 * configure.in: Added case for bfd_fr30_arch.
508 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
509 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
510 (CLEANFILES): Added stamp-fr30.
512 * fr30-asm.c: New file.
513 * fr30-dis.c: New file.
514 * fr30-opc.c: New file.
515 * fr30-opc.h: New file.
516 * po/POTFILES.in: Regenerated
517 * po/opcodes.pot: Regenerated
519 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
521 * configure.in: detect cygwin* instead of cygwin32*
522 * configure: regenerate
524 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
526 * mips-opc.c (IS_M): Added.
528 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
530 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
532 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
534 * m32r-opc.h,m32r-opc.c: Regenerate.
536 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
538 * i386-dis.c (OP_3DNowSuffix): New static function.
541 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
542 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
543 (insn_codep): New static variable.
544 (print_insn_x86): Init insn_codep after prefixes.
545 (grps): Add GRP14 entries for prefetch, prefetchw.
548 From Jeff B Epler <jepler@usgs.gov>
549 * i386-dis.c (Suffix3DNow): New table.
551 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
553 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
555 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
557 * d10v-dis.c (print_operand): If num is nonzero, then
558 add OPERAND_ACC1, not OPERAND_ACC0.
560 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
562 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
565 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
567 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
570 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
572 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
574 1998-09-09 Michael Meissner <meissner@cygnus.com>
576 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
579 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
581 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
583 (print_insn_little_arm): Detect Thumb symbols in elf object
586 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
588 * alpha-dis.c (print_insn_alpha): Use the machine type to
589 decide which PALcode set to include.
591 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
593 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
595 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
597 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
598 MSUB and MSUBS instructions.
600 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
602 * ppc-opc.c (powerpc_operands): Omit parens around additions in
605 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
607 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
608 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
609 +, -, and d for ColdFire.
611 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
612 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
613 (extract_mbe): Likewise.
615 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
617 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
619 * m10300-opc.c: First cut at UDF instructions.
621 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
623 * m32r-opc.c: Regenerate (remove semantic descriptions).
625 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
627 * arm-dis.c (print_insn_big_arm): Fix indentation.
628 (print_insn_little_arm): Likewise.
630 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
632 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
634 (print_insn_little_arm): Likewise.
636 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
638 Move all global state data into opcode table struct, and treat
639 opcode table as something that is "opened/closed".
640 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
641 (cgen_asm_init): Delete.
642 (cgen_set_parse_operand_fn): New function.
643 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
644 (cgen_dis_init): Delete.
645 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
646 (cgen_current_{opcode_table_mach,endian}): Delete.
647 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
649 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
651 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
654 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
656 * m10300-opc.c: Add entries for "no_match_operands" field in
659 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
661 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
663 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
665 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
667 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
669 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
671 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
673 (OP_J): Remove unnecessary subtraction when 16-bit displacement
674 will be masked later.
676 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
678 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
680 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
682 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
684 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
686 * m10300-dis.c: Only recognize instructions from the currently
688 * m10300-opc.c: Add field indicating the particular variant of
689 the mn10300 each instruction is available on.
691 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
693 * configure.in: For bfd_vax_arch, build vax-dis.lo.
694 * Makefile.am: Rebuild dependencies.
695 (CFILES): Add vax-dis.c.
696 (ALL_MACHINES): Add vax-dis.lo.
697 * aclocal.m4: Rebuild with current libtool.
698 * configure, Makefile.in: Rebuild.
700 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
702 * vax-dis.c: New file, from work by Pauline Middelink
703 <middelin@polyware.iaf.nl>.
704 * disassemble.c (ARCH_vax): Define if ARCH_all.
705 (disassembler): Add case for ARCH_vax.
706 * makefile.vms: Support compilation on vms/vax.
708 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
710 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
711 related to sign extension and the size of ints.
713 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
715 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
716 instructions. Support (sp) addressing mode by expanding it into
719 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
721 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
723 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
725 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
727 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
729 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
732 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
734 * mips-dis.c (print_insn_little_mips): Previously, instruction
735 printing references the symbol table to determine whether the
736 instruction resides in a block regular instructions or mips16
737 instructions. However, when the disassembler gets used in other
738 environments where the symbol table is not present, we no longer
739 rely in the symbol table, rather, use the low bit of the
740 instructions address to guess. There should be no change for usage
741 of the disassembler in host based programs, gdb, objdump.
742 (print_insn_big_mips): ditto.
743 (print_insn_mips): ditto
745 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
747 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
749 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
751 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
753 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
755 * i386-dis.c (index16): Add '%' to register names. Use ','
758 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
760 * i386-dis.c: Don't print opcode suffix when we can figure out the
761 size (and gas can!) by register operands, or from the default
763 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
765 (dis386, dis386_twobyte, grps): Use new suffix macros.
766 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
767 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
768 order of cmps operands to agree with Intel docs. Correct operand
769 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
770 agree with Intel docs.
771 (print_insn_x86): Print orphan fwait before other prefixes.
772 Return correct byte count for orphan fwait with prefixes. Don't
773 print `bound' operands in reverse order.
774 (ckprefix): Stop accumulating prefixes if we get fwait.
775 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
777 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
779 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
780 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
782 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
784 Fix problems when bfd_vma is wider than long.
785 * i386-dis.c: Make op_address and start_pc unsigned.
786 (set_op): Make parameter unsigned.
787 (print_insn_x86): Cast to bfd_vma when passing a value to
789 * ns32k-dis.c (CORE_ADDR): Don't define.
790 (print_insn_ns32k): Change type of addr to bfd_vma. Use
791 bfd_scan_vma to read back address.
792 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
794 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
795 (NEXTULONG): New definition.
796 (print_insn_m68k): Avoid overflow when computing third argument of
798 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
799 Use disp instead of val to store offset values.
800 (print_indexed): Use base_disp instead of word to store base
801 displacement, to avoid overflow.
802 * m10300-dis.c (disassemble): Cast value to long when computing
803 pc-relative address, to get correct sign extension.
805 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
807 * m32r-opc.c: Regenerate.
809 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
811 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
812 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
814 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
816 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
818 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
820 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
822 (OP_DSreg): Rename from OP_DSSI.
823 (OP_ESreg): Rename from OP_ESDI.
824 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
826 (append_seg): Rename from append_prefix.
827 (ptr_reg): New function.
828 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
830 (PREFIX_ADDR): Rename from PREFIX_ADR.
831 (float_reg): Add non-broken opcodes for people who don't want
834 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
836 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
839 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
841 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
843 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
845 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
846 0; produce error message for shifts of size 32 (or 64 for 64-bit
847 shifts), because the hardware doesn't support them.
849 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
851 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
852 LONG_2, LONG_2b formats to use this new operand.
854 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
856 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
858 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
860 * sparc-dis.c (print_insn_sparc): big endian instruction / little
863 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
865 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
866 and SHORT_B3b formats to use Rb instead of Ra.
868 Add FLAG_MUL16 to MUL2XH opcode.
870 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
871 to existing 1.1.1 parallelisation prohibition procedure.
873 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
875 * m32r-asm.c,m32r-dis.c: Regenerate.
877 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
879 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
880 with a shift count of 0.
882 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
884 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
885 (cgen_hw_lookup_by_num): New function.
887 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
889 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
891 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
893 * sparc-dis.c (print_insn_sparc): Always fetch instructions
894 as big-endian on SPARClite.
896 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
898 * d30v-opc.c (pre_defined_register): Remove alias for r0.
900 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
902 * po/Make-in (install-info): New target.
904 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
906 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
907 * configure: Rebuild.
909 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
911 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
912 variety of ISA2 instructions to set bottom ten bits of trap code.
914 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
916 * Makefile.am (config.status): Add explicit target so that
917 config.status depends upon bfd/configure.in.
918 * Makefile.in: Rebuild.
920 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
922 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
923 instructions to set bottom ten bits of break code.
924 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
925 for above optional argument.
927 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
929 * makefile.vms: Run dec c with /nodebug.
931 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
933 * Makefile.in: Rebuilt.
934 * Makefile.am: Regenerated dependencies with mkdep.
936 * opintl.h (_): Define as dgettext.
938 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
940 * cgen-asm.c: Internationalised.
941 * m32r-asm.c: Internationalised.
942 * m32r-dis.c: Internationalised.
943 * m32r-opc.c: Internationalised.
945 * aclocal.m4: Regenerated.
946 * configure: Regenerated.
947 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
948 * Makefile.in: Rebuild.
949 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
950 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
952 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
954 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
956 * aclocal.m4, configure: Rebuild with current tools.
958 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
960 * opintl.h: New file - contains internationalisation macros used
961 by source files in this directory.
962 * po/: New subdirectory - contains internationalisation files.
963 * po/Make-in: New file - Makefile constructor.
964 * po/POTFILES.in: New file - list of files in opcodes directory
965 that should be scan for internationalisation macros.
966 * po/opcodes.pot: New file - list of internationisation strings
967 found in files mentioned in po/POTFILES.in.
968 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
969 entry. Add intl directory to include paths.
970 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
971 HAVE_STRCPY, HAVE_LC_MESSAGES
972 * configure.in: Add rule to build Makefile in po subdirectory.
973 * Makefile.in: Rebuilt.
974 * aclocal.m4: Rebuilt.
975 * config.in: Rebuilt.
976 * configure: Rebuilt.
977 * alpha-opc.c: Internationalised.
978 * arc-dis.c: Internationalised.
979 * arc-opc.c: Internationalised.
980 * arm-dis.c: Internationalised.
981 * cgen-asm.c: Internationalised.
982 * d30v-dis.c: Internationalised.
983 * dis-buf.c: Internationalised.
984 * h8300-dis.c: Internationalised.
985 * h8500-dis.c: Internationalised.
986 * i386-dis.c: Internationalised.
987 * m10200-dis.c: Internationalised.
988 * m10300-dis.c: Internationalised.
989 * m68k-dis.c: Internationalised.
990 * m88k-dis.c: Internationalised.
991 * mips-dis.c: Internationalised.
992 * ns32k-dis.c: Internationalised.
993 * opintl.h: Internationalised.
994 * ppc-opc.c: Internationalised.
995 * sparc-dis.c: Internationalised.
996 * v850-dis.c: Internationalised.
997 * v850-opc.c: Internationalised.
999 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1001 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1002 (asm_hash_table_entries): New variable.
1003 (cgen_asm_init): Free asm_hash_table_entries.
1004 (hash_insn_array,hash_insn_list): New functions.
1005 (build_asm_hash_table): Use them. Hash macro insns as well.
1006 (cgen_asm_lookup_insn): Update.
1007 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1008 (dis_hash_table_entries): New variable.
1009 (cgen_dis_init): Free dis_hash_table_entries.
1010 (hash_insn_array,hash_insn_list): New functions.
1011 (build_dis_hash_table): Use them. Hash macro insns as well.
1012 (cgen_dis_lookup_insn): Update.
1013 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1014 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1015 (cgen_macro_insn_count): New function.
1016 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1018 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1020 * i386-dis.c (OP_DSSI): Print segment override.
1022 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1024 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1027 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1029 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1030 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1031 * configure.in: Define and substitute WIN32LDFLAGS and
1033 * aclocal.m4: Rebuild with new libtool.
1034 * configure, Makefile.in: Rebuild.
1036 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1038 * m32r-opc.c: Regenerate.
1040 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1042 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1043 before trying to copy it.
1044 * Makefile.in: Rebuild.
1046 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1048 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1050 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1052 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1053 from an arbitrary valid buffer instead of fetching them on demand
1055 (invalid_float): use bit_extract_simple() instead of bit_extract().
1057 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1059 From H.J. Lu <hjl@gnu.org>:
1060 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1063 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1065 * Branched binutils 2.9.
1067 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1069 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1070 disassembling last 4 bytes of a section.
1072 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1074 Fix some gcc -Wall warnings:
1075 * arc-dis.c (print_insn): Add casts to avoid warnings.
1076 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1077 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1078 * m10200-dis.c (disassemble): Likewise.
1079 * m10300-dis.c (disassemble): Likewise.
1080 * ns32k-dis.c (print_insn_ns32k): Likewise.
1081 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1082 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1083 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1084 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1085 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1086 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1087 * tic80-dis.c (print_one_instruction): Likewise.
1088 * w65-dis.c (print_operand): Likewise.
1089 * z8k-dis.c (fetch_data): Likewise.
1090 * a29k-dis.c: Add return type for find_byte_func_type.
1091 * arc-opc.c: Include <stdio.h>. Remove declarations of
1092 insert_multshift and extract_multshift.
1093 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1095 (extract_value): Fully parenthesize expression.
1096 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1097 * h8500-opc.h (h8500_table): Fully bracket initializer.
1098 * w65-opc.h (optable): Likewise.
1099 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1100 * i386-dis.c (OP_E): Initialize local variables.
1101 * m10200-dis.c (print_insn_mn10200): Likewise.
1102 * mips-dis.c (print_insn_mips16): Likewise.
1103 * sh-dis.c (print_insn_shx): Likewise.
1104 * v850-dis.c (print_insn_v850): Likewise.
1105 * ns32k-dis.c (print_insn_arg): Declare.
1106 (get_displacement, invalid_float): Declare.
1107 (list_search, sign_extend, flip_bytes): Declare return type.
1108 (get_displacement): Likewise.
1109 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1111 (print_insn_ns32k): Make i unsigned.
1112 (invalid_float): Make static. Declare type of val.
1113 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1114 on each for iteration.
1115 * tic30-dis.c (get_indirect_operand): Likewise.
1116 * z8k-dis.c (print_insn_z8001): Declare return type.
1117 (print_insn_z8002): Likewise.
1118 (unparse_instr): Fix sprintf format strings.
1120 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1122 * mips-opc.c: Add "sync.l" and "sync.p".
1124 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1126 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1127 default m68k variant to recognize.
1129 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1130 (ctrl, cobr, mem, ea): Likewise.
1131 (print_addr): Likewise. Remove cast.
1132 (ea): Cast argument of print_addr to bfd_vma.
1134 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1136 (cgen_parse_unsigned_integer): Likewise.
1137 (cgen_parse_address): Likewise.
1139 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1141 * i960-dis.c (ctrl): Add full braces to structure initialization.
1142 (cobr, mem, reg): Likewise.
1143 (ea): Correct parenthesization in expression.
1145 * cgen-asm.c: Include <ctype.h>.
1146 (build_asm_hash_table): Remove unused local variable i.
1147 (cgen_parse_keyword): Add casts to avoid warnings.
1149 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1150 symbol. Fix indentation.
1151 (print_insn_little_arm): Likewise.
1153 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1155 * configure.in: Use AM_DISABLE_SHARED.
1156 * aclocal.m4, configure: Rebuild with libtool 1.2.
1158 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1160 These patches are courtesy of Jonathan Walton and Tony Thompson
1161 (athompso@cambridge.arm.com).
1163 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1166 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1167 both the offset and the label closest to the destination.
1169 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1171 * m32r-opc.h: Regenerate.
1173 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1175 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1177 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1179 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1180 assume that info->symbols is non-empty.
1182 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1184 * alpha-opc.c (cvtqs) There is no such thing.
1185 (cvttq): Missing most of the /*d variants.
1187 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1189 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1190 delayed branches or jumps.
1192 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1194 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1196 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1197 * tic30-dis.c (print_branch): Likewise.
1199 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1201 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1202 saved_symbol code as it is no longer needed.
1204 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1206 * cgen-asm.c: Include symcat.h.
1207 * cgen-dis.c,cgen-opc.c: Ditto.
1208 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1210 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1212 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1214 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1216 * m32r-opc.[ch]: Regenerate.
1218 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1220 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1221 arguments. Don't perform validation here.
1222 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1224 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1226 * m32r-opc.c: Regenerate.
1228 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1230 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1231 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1233 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1235 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1237 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1239 * configure.in: Get the version number from BFD.
1240 * configure: Rebuild.
1242 From H.J. Lu <hjl@gnu.org>:
1243 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1244 * Makefile.in: Rebuild.
1246 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1248 * m32r-opc.c: Regenerate.
1249 * m32r-opc.h: Regenerate.
1251 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1253 * m32r-opc.c: Regenerate.
1255 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1257 Fix rac to accept only a0:
1258 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1259 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1260 Introduce OPERAND_GPR.
1261 * d10v-dis.c (print_operand): Likewise.
1263 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1265 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1266 (cgen_hw_lookup): Make result const.
1267 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1269 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1271 * configure, aclocal.m4: Rebuild with new libtool.
1273 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1275 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1276 instructions use a PC relative branch, not absolute.
1278 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1280 * configure.in: Set libtool_enable_shared rather than
1281 libtool_shared. Remove diversion hack.
1282 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1284 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1286 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1287 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1289 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1291 * tic30-dis.c: New file.
1292 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1293 * configure.in: Handle bfd_tic30_arch.
1294 * Makefile.am: Rebuild dependencies.
1295 (CFILES): Add tic30-dis.c
1296 (ALL_MACHINES): Add tic30-dis.lo.
1297 * configure, Makefile.in: Rebuild.
1299 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1301 * m32r-opc.h (HAVE_CPU_M32R): Define.
1303 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1305 * v850-opc.c (insertion routines): If both alignment and size is
1306 wrong then report this.
1308 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1310 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1311 Only recognize instructions for the current target_processor.
1313 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1315 * d10v-dis.c (PC_MASK): Correct value.
1316 (print_operand): If there's a reloc, don't calculate the
1317 address because they could be in different sections.
1319 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1321 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1322 instruction after the 4650's "mul" instruction; nobody's using the
1323 4010 these days. If object files someday indicate which processor
1324 variant they're intended for, we can do a better job at this.
1326 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1328 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1329 table provided entry size. Use CGEN_INSN_MNEMONIC.
1330 (cgen_parse_keyword): Rewrite.
1331 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1332 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1333 * cgen-opc.c: Clean up pass over `struct foo' usage.
1334 (cgen_keyword_lookup_value): Handle "" entry.
1335 (cgen_keyword_add): Likewise.
1337 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1339 * mips-opc.c: Add FP_D to s.d instruction flags.
1341 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1343 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1345 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1347 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1348 PC relative offset forms before the 15 bit forms. An assembler command
1349 line option now chooses the default.
1351 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1353 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1354 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1356 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1358 * configure: Only build libopcodes shared if --enable-shared's value
1359 was `yes', or was set to `*opcodes*'.
1360 * aclocal.m4: Likewise.
1361 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1362 original source of this bit of code. It's not clear what the best fix
1365 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1367 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1368 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1369 offset forms before the 15 bit forms, to default to the long forms.
1371 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1373 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1375 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1377 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1378 symbol if none is present.
1379 (print_insn_big_arm): Prevent examination of stored symbol if
1382 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1384 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1386 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1388 * disassemble.c: Remove disasm_symaddr() function.
1390 * arm-dis.c: Use info->symbol instead of info->flags to determine
1391 if disassmbly should be in Thumb or Arm mode.
1393 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1395 * arm-dis.c: Add support for disassembling Thumb opcodes.
1396 (print_insn_thumb): New function.
1398 * disassemble.c (disasm_symaddr): New function.
1400 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1401 (thumb_opcodes): Table of Thumb opcodes.
1403 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1405 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1407 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1408 and 'v' as operand types.
1410 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1412 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1413 <olivier.carmona@di.epfl.ch>.
1414 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1415 which has a two word opcode with a one word argument.
1417 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1419 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1420 unsigned, not signed.
1421 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1423 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1425 * d10v-dis.c (print_operand):
1426 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1428 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1430 * d10v-opc.c (OPERAND_FLAG): Split into:
1431 (OPERAND_FFLAG, OPERAND_CFLAG) .
1435 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1437 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1438 field for all INSN_MACRO's.
1439 * mips16-opc.c: same
1441 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1443 * mips-opc.c (sync,cache): These are 3900 insns.
1445 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1447 sh-opc.h (sh_table): Remove ftst/nan.
1449 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1451 * mips-opc.c (ffc, ffs): Fix mask.
1453 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1455 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1458 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1460 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1461 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1463 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1465 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1466 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1468 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1470 * v850-dis.c (disassemble): Replace // with /* ... */
1472 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1474 * sparc-opc.c: Add wr & rd for v9a asr's.
1475 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1476 (v9a_asr_reg_names): New variable.
1477 Patch from David Miller <davem@vger.rutgers.edu>.
1479 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1481 * sparc-opc.c (v9notv9a): New insn type.
1482 (IMPDEP): Move to the end to not conflict with edge8 et al.
1483 Patch from David Miller <davem@vger.rutgers.edu>.
1485 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1487 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1489 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1491 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1493 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1495 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1496 of disassemble_info structure to determine if an overlay address
1497 has a matching symbol in low memory.
1499 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1500 new symbol_at_address_func field in disassemble_info structure.
1502 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1504 * v850-opc.c (extract_d22): Use signed arithmatic.
1506 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1508 * mips-opc.c: Three op mult is not an ISA insn.
1510 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1512 * mips-opc.c: Fix formatting.
1514 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1516 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1517 than assuming that char is signed. Explicitly sign extend 16 bit
1518 values, rather than assuming that short is 16 bits.
1519 (OP_sI, OP_J, OP_DIR): Likewise.
1521 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1523 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1526 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1528 * v850-opc.c: Fix typo in comment.
1530 * v850-dis.c (disassemble): Add test of processor type when
1531 determining opcodes.
1533 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1535 * configure.in: Use a diversion to set enable_shared before the
1536 arguments are parsed.
1537 * configure: Rebuild.
1539 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1541 * m68k-opc.c (TBL1): Use ! rather than `.
1542 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1544 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1546 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1548 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1550 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1553 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1554 * aclocal.m4: Rebuild with new libtool.
1555 * configure: Rebuild.
1557 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1559 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1561 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1563 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1565 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1567 * v850-opc.c (v850_opcodes): Further rearrangements.
1569 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1571 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1573 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1575 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1578 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1580 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1582 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1584 * v850-opc.c: Initialise processors field of v850_opcode structure.
1586 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1588 Merge changes from Martin Hunt:
1590 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1592 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1593 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1594 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1596 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1598 * d30v-dis.c (print_insn): First operand of d*i (delayed
1599 branch) instructions is relative.
1601 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1602 (d30v_operand_table): Add IMM6S3 type.
1603 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1605 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1606 and cmp instructions.
1608 * d30v-opc.c: Correct entries for repeat*, and sat*.
1609 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1610 types. Correct several formats.
1612 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1614 * d30v-opc.c (pre_defined_registers): Change control registers.
1616 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1617 SHORT_C2. Manual was incorrect.
1619 * d30v-dis.c (lookup_opcode): Return value now indicates
1620 if an opcode has a short and a long form. Used for deciding
1621 to append a ".s" or ".l".
1622 (print_insn): Append a ".s" to an instruction if it is
1623 the short form and ".l" if it is a long form. Do not append
1624 anything if the instruction has only one possible size.
1626 * d30v-opc.c: Change mulx2h to require an even register.
1627 New form: SHORT_A2; a SHORT_A form that needs an even
1628 register as the first operand.
1630 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1631 instruction was not being disassembled if there were an odd
1632 number of instructions.
1634 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1636 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1638 * v850-dis.c (disassemble): Improved display of register lists.
1640 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1642 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1643 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1644 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1645 fandnot1s, fandnot2s.
1647 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1649 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1651 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1653 * cgen-asm.c (cgen_parse_address): New argument resultp.
1654 All callers updated.
1655 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1657 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1659 * mn10200-dis.c (disassemble): PC relative instructions are
1660 relative to the next instruction, not the current instruction.
1662 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1664 * v850-dis.c (disassemble): Only signed extend values that are not
1665 returned by extract functions.
1666 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1668 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1670 * v850-opc.c: Update comments. Remove use of
1671 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1673 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1675 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1677 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1679 * configure: Rebuilt with latest devo autoconf for NT support.
1681 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1683 * v850-dis.c (disassemble): Use curly brace syntax for register
1686 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1687 where r0 is being used as a destination register.
1689 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1693 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1695 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1697 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1699 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1700 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1703 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1705 * configure (cgen_files): Add support for v850e target.
1706 * configure.in (cgen_files): Add support for v850e target.
1708 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1710 * configure (cgen_files): Add support for v850ea target.
1711 * configure.in (cgen_files): Add support for v850ea target.
1713 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1715 * configure.in (bfd_arc_arch): Add.
1716 * configure: Rebuild.
1717 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1718 * Makefile.in: Rebuild.
1719 * arc-dis.c, arc-opc.c: New files.
1720 * disassemble.c (ARCH_all): Define ARCH_arc.
1721 (disassembler): Add ARC support.
1723 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1725 * v850-dis.c (disassemble): Add support for v850EA instructions.
1727 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1728 (v850_opcodes): Add v850EA instructions.
1730 * v850-dis.c (disassemble): Add support for v850E instructions.
1732 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1733 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1734 insert_spe, extract_spe): New Functions.
1735 (v850_opcodes): Add v850E instructions.
1737 * v850-opc.c: Reorganised and re-layed out to improve readability
1740 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * configure: Rebuild with autoconf 2.12.1.
1744 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * aclocal.m4, configure: Rebuild with new automake patches.
1748 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1750 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1751 * acinclude.m4: Just include acinclude.m4 from BFD.
1752 * aclocal.m4, configure: Rebuild.
1754 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1756 * Makefile.am: New file, based on old Makefile.in.
1757 * acconfig.h: New file.
1758 * acinclude.m4: New file.
1759 * stamp-h.in: New file.
1760 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1761 Removed shared library handling; now handled by libtool. Replace
1762 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1763 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1764 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1765 handling in AC_OUTPUT.
1766 * dep-in.sed: Change .o to .lo.
1767 * Makefile.in: Now built with automake.
1768 * aclocal.m4: Now built with aclocal.
1769 * config.in, configure: Rebuild.
1771 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1773 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1775 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1777 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1779 * sparc-dis.c (sorted_opcodes): New static local.
1780 (struct opcode_hash): `opcode' is pointer to const element.
1781 (build_hash): First arg is now table of sorted pointers.
1782 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1783 (compare_opcodes): Update.
1785 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1787 * cgen-opc.c: #include <ctype.h>.
1788 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1789 Handle case insensitive hashing.
1790 (hash_keyword_value): Change type of `value' to unsigned int.
1792 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1794 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1795 precision FP, mark it as such. Likewise for double precision
1796 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1799 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1801 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1803 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1804 nesting depth when all the macros are expanded.
1806 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1808 * sparc-opc.c: The fcmp v9a instructions take an integer register
1809 as a destination, not a floating point register. From Christian
1810 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1812 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1814 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1815 syntax. From Roman Hodek
1816 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1818 * i386-dis.c (twobyte_has_modrm): Fix pand.
1820 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1822 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1824 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1826 * arm-dis.c: Add prototypes for arm_decode_shift and
1829 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1831 * mips-opc.c: Add r3900 insns.
1833 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1835 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1836 print delay slot instructions on the same line. When using a PC
1837 relative load, add a comment with the value being loaded if it can
1840 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1842 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1843 to pushS/popS for segment regs and byte constant so that
1844 pushw/popw printed when in 16 bit data mode.
1846 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1847 print cbtw, cwtd in 16 bit data mode.
1848 * i386-dis.c (putop): extra case W to support above.
1850 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1851 address size prefix in 16 bit address mode.
1853 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1855 * sh-dis.c: Reindent. Rename local variable fprintf to
1858 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1862 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1864 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1866 * mips16-opc.c (mip16_opcodes): same.
1868 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1870 * m68k-opc.c (moveb): Change $d to %d.
1872 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1874 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1875 (twobyte_has_modrm): Likewise.
1877 (OP_MMX, OP_EM, OP_MS): New static functions.
1879 * i386-dis.c: Revert patch of April 4. The output now matches
1882 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1884 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1887 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1889 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1891 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1893 * Makefile.in (install): Depend upon installdirs.
1894 (installdirs): New target.
1896 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1898 From Thomas Graichen <graichen@rzpd.de>:
1899 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1900 * configure: Rebuild.
1902 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1904 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1905 Delete string{,s}.h support.
1907 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1909 * cgen-asm.c (cgen_parse_operand_fn): New global.
1910 (cgen_parse_{{,un}signed_integer,address}): Update call to
1911 cgen_parse_operand_fn.
1912 (cgen_init_parse_operand): New function.
1913 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1914 from cgen_asm_init_parse.
1915 (m32r_cgen_assemble_insn): New operand `errmsg'.
1916 Delete call to as_bad, return error message to caller.
1917 (m32r_cgen_asm_hash_keywords): #if 0 out.
1919 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1921 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1923 [case 'J']: Fix typo in register name.
1925 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1927 * configure.in: Substitute SHLIB_LIBS.
1928 * configure: Rebuild.
1929 * Makefile.in (SHLIB_LIBS): New variable.
1930 ($(SHLIB)): Use $(SHLIB_LIBS).
1932 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1934 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1936 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1938 * disassemble.c (disassembler): Handle m32r.
1940 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1942 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1943 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1944 * Makefile.in (CFILES): Add them.
1945 (ALL_MACHINES): Add them.
1946 (dependencies): Regenerate.
1947 * configure.in (cgen_files): New variable.
1948 (bfd_m32r_arch): Add entry.
1949 * configure: Regenerate.
1951 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1953 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1954 * configure: Rebuild.
1956 * Makefile.in: Rebuild dependencies.
1958 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1960 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1963 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1965 * Branched binutils 2.8.
1967 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * m10200-dis.c: Rename from mn10200-dis.c.
1970 * m10200-opc.c: Rename from mn10200-opc.c.
1971 * m10300-dis.c: Rename from mn10300-dis.c
1972 * m10300-opc.c: Rename from mn10300-opc.c.
1973 * Makefile.in: Update accordingly.
1975 * mips16-opc.c: Add mul and dmul macros.
1977 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1979 * makefile.vms: Update CFLAGS, add clean target.
1981 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1983 * mips-opc.c: Add "wait". From Ralf Baechle
1984 <ralf@gnu.ai.mit.edu>.
1986 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1987 * configure, config.in: Rebuild.
1988 * sysdep.h: Include <stdlib.h> if it exists.
1989 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1991 * Makefile.in: Rebuild dependencies.
1993 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1995 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1996 Andrew Bray <andy@madhouse.demon.co.uk>.
1998 * mips-opc.c: Add cast when setting mips_opcodes.
2000 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2002 * v850-dis.c (disassemble): Fix sign extension problem.
2003 * v850-opc.c (extract_d*): Fix sign extension problems to make
2004 disassembly calculate branch offsets correctly.
2006 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2008 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2010 * mips-opc.c: Add dctr and dctw.
2012 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2014 * d30v-dis.c (print_insn): Change the way signed constants
2017 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2019 * Makefile.in (BFD_H): New variable.
2020 (HFILES): New variable.
2021 (CFILES): Add all C files.
2022 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2023 Delete old dependencies, and build new ones.
2024 * dep-in.sed: New file.
2026 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2028 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2030 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2032 * mn10200-opc.c: Change "trap" to "syscall".
2033 * mn10300-opc.c: Add new "syscall" instruction.
2035 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2037 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2038 mulul insns on the coldfire.
2040 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2042 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2043 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2044 (print_insn_little_arm): Likewise.
2046 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2048 Based on patches from H.J. Lu <hjl@lucon.org>:
2049 * i386-dis.c (fetch_data): Add prototype.
2050 * m68k-dis.c (fetch_data): Add prototype.
2051 (dummy_print_address): Add prototype. Make static.
2052 * ppc-opc.c (valid_bo): Add prototype.
2053 * sparc-dis.c (build_hash_table): Add prototype.
2054 (is_delayed_branch, compute_arch_mask): Add prototypes.
2055 (print_insn_sparc): Make several local variables const.
2056 (compare_opcodes): Change arguments to const PTR. Add prototype.
2057 * sparc-opc.c (arg): Change name field to be const.
2058 (lookup_name, lookup_value): Add prototypes. Change table and
2059 name parameters to be const.
2060 (sparc_encode_asi): Change name parameter to be const.
2061 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2062 (sparc_encode_sparclet_cpreg): Likewise.
2063 (sparc_decode_asi): Change return type to be const.
2064 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2065 (sparc_decode_sparclet_cpreg): Likewise.
2067 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2069 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2070 Solaris doesn't like the combined options, and the -f is
2072 (stamp-tshlink, install): Likewise.
2074 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2076 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2079 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2081 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2083 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2085 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2088 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2090 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2092 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2094 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2096 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2098 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2100 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2102 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2103 floatformat_to_double to make portable.
2104 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2107 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2109 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2110 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2112 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2114 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2115 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2117 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2119 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2120 (OFF_SL_BR_SCALED): ... to this, and added the flag
2121 TIC80_OPERAND_BASEREL to the flags word.
2122 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2125 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2127 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2128 Change mips_opcodes from const array to a pointer,
2129 and change bfd_mips_num_opcodes from const int to int,
2130 so that we can increase the size of the mips opcodes table
2133 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2135 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2136 store BITNUM values in the table in one's complement form
2137 to match behavior when assembler is given a raw numeric
2138 value for a BITNUM operand.
2139 * tic80-dis.c (print_operand_bitnum): Ditto.
2141 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2143 * d30v-opc.c: Removed references to FLAG_X.
2145 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2147 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2149 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2151 * Makefile.in: Added d30v object files.
2152 * configure: (bfd_d30v_arch) Rebuilt.
2153 * configure.in: (bfd_d30v_arch) Added new case.
2154 * d30v-dis.c: New file.
2155 * d30v-opc.c: New file.
2156 * disassemble.c (disassembler) Add entry for d30v.
2158 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2160 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2161 representations for the floating point BITNUM values.
2163 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2165 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2166 in the table in one's complement form, as they appear in the
2168 (tic80_symbol_to_value): Use macros to access predefined
2170 (tic80_value_to_symbol): Ditto.
2171 (tic80_next_predefined_symbol): New function.
2172 * tic80-dis.c (print_operand_bitnum): Remove code that did
2173 one's complement for BITNUM values.
2175 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2177 * makefile.vms: Remove 8 bit characters. Update to latest
2180 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2182 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2184 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2186 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2187 (IMM24_PCREL): Likewise.
2189 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2191 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2192 address for an extended PC relative instruction that is not a
2195 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2197 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2200 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2202 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2203 (tic80_opcodes): Sort entries so that long immediate forms
2204 come after short immediate forms, making it easier for
2205 assembler to select the right one for a given operand.
2207 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2209 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2211 (print_insn_mips16): Likewise.
2213 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2215 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2216 a symbol class that restricts translation to just that
2217 class (general register, condition code, etc).
2219 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2221 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2222 and REG_DEST_E for register operands that have to be
2223 an even numbered register. Add REG_FPA for operands that
2224 are one of the floating point accumulator registers.
2225 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2226 (tic80_opcodes): Change entries that need even numbered
2227 register operands to use the new operand table entries.
2228 Add "or" entries that are identical to "or.tt" entries.
2230 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2232 * mips16-opc.c: Add new cases of exit instruction for
2234 * mips-dis.c (print_mips16_insn_arg): Display floating point
2235 registers in operands of exit instruction. Print `$' before
2236 register names in operands of entry and exit instructions.
2238 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2240 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2241 pairs for all predefined symbols recognized by the assembler.
2242 Also used by the disassembling routines.
2243 (tic80_symbol_to_value): New function.
2244 (tic80_value_to_symbol): New function.
2245 * tic80-dis.c (print_operand_control_register,
2246 print_operand_condition_code, print_operand_bitnum):
2247 Remove private tables and use tic80_value_to_symbol function.
2249 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2251 * d10v-dis.c (print_operand): Change address printing
2252 to correctly handle PC wrapping. Fixes PR11490.
2254 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2256 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2259 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2261 * mips-dis.c (print_insn_mips16): Set insn_info information.
2262 (print_mips16_insn_arg): Likewise.
2264 * mips-dis.c (print_insn_mips16): Better handling of an extend
2265 opcode followed by an instruction which can not be extended.
2267 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2269 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2270 coldfire moveb instruction to not allow an address register as
2271 destination. Although the documentation does not indicate that
2272 this is invalid, experiments uncovered unexpected behavior.
2273 Added a comment explaining the situation. Thanks to Andreas
2274 Schwab for pointing this out to me.
2276 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2278 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2279 entries are presorted so that entries with the same mnemonic are
2280 adjacent to each other in the table. Sort the entries for each
2281 instruction so that this is true.
2283 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2285 * m68k-dis.c: Include <libiberty.h>.
2286 (print_insn_m68k): Sort the opcode table on the most significant
2287 nibble of the opcode.
2289 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2291 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2292 "vsub", "vst", "xnor", and "xor" instructions.
2293 (V_a1): Renamed from V_a, msb of accumulator reg number.
2294 (V_a0): Add macro, lsb of accumulator reg number.
2296 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2298 * tic80-dis.c (print_insn_tic80): Broke excessively long
2299 function up into several smaller ones and arranged for
2300 the instruction printing function to be callable recursively
2301 to print vector instructions that have both a load and a
2302 math instruction packed into a single opcode.
2303 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2304 to explain why it comes after the other vector opcodes.
2306 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2308 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2309 move insns to handle immediate operands.
2311 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2313 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2314 fix operand mask in the "moveml" entries for the coldfire.
2316 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2318 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2319 New macros for building vector instruction opcodes.
2320 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2321 FMT_LI, which were unused. The field is now a flags field.
2322 Remove some opcodes that are possible, but illegal, such
2323 as long immediate instructions with doubles for immediate
2324 values. Add "vadd" and "vld" instructions.
2326 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2328 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2329 the order more logical. Move the shift alias instructions ("rotl",
2330 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2331 interspersed with the regular sr.x and sl.x instructions. Add
2332 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2333 "sub", "subu", "swcr", and "trap".
2335 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2337 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2338 (OFF_SL_PC): Renamed from OFF_SL.
2339 (OFF_SS_BR): New operand type for base relative operand.
2340 (OFF_SL_BR): New operand type for base relative operand.
2341 (REG_BASE): New operand type for base register operand.
2342 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2343 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2344 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2346 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2347 10 char field, padded with spaces on rhs, rather than a string
2348 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2349 than old TIC80_OPERAND_RELATIVE. Add support for new
2350 TIC80_OPERAND_BASEREL flag bit.
2352 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2354 * tic80-dis.c (print_insn_tic80): Print floating point operands
2356 * tic80-opc.c (SPFI): Add single precision floating point
2357 immediate operand type.
2358 (ROTATE): Add rotate operand type for shifts.
2359 (ENDMASK): Add for shifts.
2360 (n): Macro for the 'n' bit.
2361 (i): Macro for the 'i' bit.
2362 (PD): Macro for the 'PD' field.
2363 (P2): Macro for the 'P2' field.
2364 (P1): Macro for the 'P1' field.
2365 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2368 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2370 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2371 adding in current address for pc-relative operands.
2373 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2375 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2376 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2377 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2378 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2379 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2380 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2381 (REG_SCALED, LSI_SCALED): New operand types.
2382 (E): New macro for 'E' bit at bit 27.
2383 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2384 opcodes, including the various size flavors (b,h,w,d) for
2385 the direct load and store instructions.
2387 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2389 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2391 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2392 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2393 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2394 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2395 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2396 masks with "MASK_* & ~M_*" to get the M bit reset.
2397 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2399 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2401 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2402 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2403 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2405 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2406 CC, SICR, and LICR table entries.
2407 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2408 "bcnd", and "brcr" opcodes.
2410 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2412 * ppc-opc.c (powerpc_operands): Make comment match the
2413 actual fields (no shift field).
2414 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2415 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2416 partial implementation, work in progress.
2417 * tic80-opc.c (tic80_operands): Begin construction operands table.
2418 (tic80_opcodes): Continue populating opcodes table and start
2419 filling in the operand indices.
2420 (tic80_num_opcodes): Add this.
2422 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2424 * m68k-opc.c: Add #B case for moveq.
2426 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2428 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2429 before they are used.
2431 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2433 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2434 for "breakpoint" instruction.
2436 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2438 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2439 (dep): Use ALL_CFLAGS rather than CFLAGS.
2441 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2443 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2446 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2448 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2449 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2451 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2453 * mips16-opc.c: Add "abs".
2455 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2457 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2458 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2459 (disassembler): Add bfd_arch_tic80 support to set disassemble
2460 to print_insn_tic80.
2461 * tic80-dis.c (print_insn_tic80): Add stub.
2463 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2465 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2466 * configure: Regenerate with autoconf.
2467 * tic80-dis.c: Add file.
2468 * tic80-opc.c: Add file.
2470 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2472 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2474 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2476 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2477 (mn10200_opcodes): Use it for some logicals and btst insns.
2478 Add "break" and "trap" instructions.
2480 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2482 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2484 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2486 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2487 relative load or add now depends upon whether the instruction is
2490 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2492 * mn10200-dis.c: Finish writing disassembler.
2493 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2494 Fix mask for "jmp (an)".
2496 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2497 handle endianness issues for mn10300.
2499 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2501 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2503 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2504 instruction. Fix opcode field for "movb (imm24),dn".
2506 * mn10200-opc.c (mn10200_operands): Fix insertion position
2509 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2511 * mn10200-opc.c: Create mn10200 opcode table.
2512 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2513 but moving along nicely.
2515 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2517 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2519 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2521 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2522 specifiers for fmovem* instructions.
2524 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2526 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2528 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2530 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2533 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2535 * mn10300-opc.c: Add some comments explaining the various
2538 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2540 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2542 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2545 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2546 operand specifiers in fmovm* instructions.
2548 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2550 * ppc-opc.c (insert_li): Give an error if the offset has the two
2551 least significant bits set.
2553 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2555 * mips-dis.c (print_insn_mips16): Separate the instruction from
2556 the arguments with a tab, not a space.
2558 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2560 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2563 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2566 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2568 * configure: Rebuild with autoconf 2.12.
2570 Add support for mips16 (16 bit MIPS implementation):
2571 * mips16-opc.c: New file.
2572 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2573 (mips16_reg_names): New static array.
2574 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2575 after seeing a 16 bit symbol.
2576 (print_insn_little_mips): Likewise.
2577 (print_insn_mips16): New static function.
2578 (print_mips16_insn_arg): New static function.
2579 * mips-opc.c: Add jalx instruction.
2580 * Makefile.in (mips16-opc.o): New target.
2581 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2582 * configure: Rebuild.
2584 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2586 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2587 operand specifiers in *save, *restore and movem* instructions.
2589 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2592 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2593 register operands for immediate arithmetic, not, neg, negx, and
2594 set according to condition instructions.
2596 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2597 specifier of the effective-address operand in immediate forms of
2598 arithmetic instructions. The specifier for the immediate operand
2599 notes how and where the constant will be stored.
2601 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2603 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2606 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2609 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2611 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2613 * mn10300-dis.c (disassemble): Handle register lists.
2615 * mn10300-opc.c: Fix handling of register list operand for
2616 "call", "ret", and "rets" instructions.
2618 * mn10300-dis.c (disassemble): Print PC-relative and memory
2619 addresses symbolically if possible.
2620 * mn10300-opc.c: Distinguish between absolute memory addresses,
2621 pc-relative offsets & random immediates.
2623 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2625 (disassemble): Handle SPLIT and EXTENDED operands.
2627 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2629 * mn10300-dis.c: Rough cut at printing some operands.
2631 * mn10300-dis.c: Start working on disassembler support.
2632 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2634 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2636 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2638 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2640 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2642 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2644 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2645 register argument is calls and jmp instructions.
2647 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2650 getx operand. Fix opcode for mulqu imm,dn.
2652 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2654 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2655 in MN10300_OPERAND_SPLIT operands for how many bits
2656 appear in the basic insn word. Add IMM32_HIGH24,
2657 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2658 (mn10300_opcodes): Use new operands as needed.
2660 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2661 for bset, bclr, btst instructions.
2662 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2664 * mn10300-opc.c (mn10300_operands): Remove many redundant
2665 operands. Update opcode table as appropriate.
2666 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2667 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2669 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2671 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2672 operands (for indexed load/stores). Fix bitpos for DI
2673 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2674 few instructions that insert immediates/displacements in the
2675 middle of the instruction. Add IMM8E for 8 bit immediate in
2676 the extended part of an instruction.
2677 (mn10300_operands): Use new opcodes as appropriate.
2679 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2681 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2682 sequential so the assembler never parallelizes it with
2685 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2687 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2688 a data/address register that appears in register field 0
2689 and register field 1.
2690 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2692 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2694 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2695 standard disassembly.
2697 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2698 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2699 Recategorize PALcode instructions.
2701 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2703 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2705 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2707 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2708 there are no operand types.
2710 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2712 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2714 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2716 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2718 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2720 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2722 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2723 and sst.w instructions.
2725 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2728 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2730 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2733 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2735 * ppc-opc.c (PPCPWR2): Define.
2736 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2739 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2742 field for movhu instruction.
2744 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2745 cast value to "long" not "signed long" to keep hpux10
2748 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2750 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2753 * mn10300-opc.c (FMT*): Remove definitions.
2755 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2756 for shift-by-register opcodes.
2758 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2759 into [AD][MN][01] for encoding the position of the register
2762 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2764 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2765 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2767 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2769 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2770 Fix various typos. Add "PAREN" operand.
2771 (MEM, MEM2): Define.
2772 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2773 operands. Fix several typos.
2775 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2778 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2780 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2781 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2783 (mn10300_opcodes): Break opcode format out into its own field.
2784 Update many operand fields to deal with signed vs unsigned
2785 issues. Fix one or two typos in the "mov" instruction
2786 opcode, mask and/or operand fields.
2788 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2790 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2791 m68851 wasn't reset.
2793 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2795 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2796 all opcodes. Very rough cut at operands for all opcodes.
2798 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2801 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2803 * mn10200-opc.c, mn10300-opc.c: New files.
2804 * mn10200-dis.c, mn10300-dis.c: New files.
2805 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2806 * disassemble.c: Break mn10x00 support into 10200 and 10300
2808 * configure.in: Likewise.
2809 * configure: Rebuilt.
2811 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2813 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2815 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2817 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2819 * disassemble (ARCH_mn10x00): Define.
2820 (disassembler): Handle bfd_arch_mn10x00.
2821 * configure.in: Recognize bfd_mn10x00_arch.
2822 * configure: Rebuilt.
2824 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2826 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2827 accordingly. Don't declare functions using op_rtn.
2829 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2831 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2832 params to be more standard.
2833 * (disassemble): Print absolute addresses and symbolic names for
2834 branch and jump targets.
2835 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2837 * (v850_opcodes): Add breakpoint insn.
2839 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2841 * m68k-opc.c: Move the fmovemx data register cases before the
2842 other cases, so that they get recognized before the data register
2843 does gets treated as a degenerate register list.
2845 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2847 * mips-opc.c: Add a case for "div" and "divu" with two registers
2848 and a destination of $0.
2850 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2852 * mips-dis.c (print_insn_arg): Add prototype.
2853 (_print_insn_mips): Ditto.
2855 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2857 * mips-dis.c (print_insn_arg): Print condition code registers as
2860 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2862 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2864 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2866 * v850-dis.c (disassemble): Make static. Provide prototype.
2868 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2870 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2873 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2875 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2876 ']' characters into the output stream.
2877 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2878 Add "memop" field to all opcodes (for the disassembler).
2879 Reorder opcodes so that "nop" comes before "mov" and "jr"
2880 comes before "jarl".
2882 * v850-dis.c (print_insn_v850): Fix typo in last change.
2884 * v850-dis.c (print_insn_v850): Properly handle disassembling
2885 a two byte insn at the end of a memory region when the memory
2886 region's size is only two byte aligned.
2888 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2890 * v850-dis.c (v850_reg_names): Define.
2891 (v850_sreg_names, v850_cc_names): Likewise.
2892 (disassemble): Very rough cut at printing operands (unformatted).
2894 * v850-opc.c (BOP_MASK): Fix.
2895 (v850_opcodes): Fix mask for jarl and jr.
2897 * v850-dis.c: New file. Skeleton for disassembler support.
2898 * Makefile.in Remove v850 references, they're not needed here.
2899 * configure.in: Add v850-dis.o when building v850 toolchains.
2900 * configure: Rebuilt.
2901 * disassemble.c (disassembler): Call v850 disassembler.
2903 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2904 (insert_d8_6, extract_d8_6): New functions.
2905 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2906 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2908 (IF4A, IF4B): Use "D7" instead of "D7S".
2909 (IF4C, IF4D): Use "D8_7" instead of "D8".
2910 (IF4E, IF4F): New. Use "D8_6".
2911 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2912 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2914 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2915 (v850_operands): Change D16 to D16_15, use special insert/extract
2916 routines. New new D16 that uses the generic insert/extract code.
2917 (IF7A, IF7B): Use D16_15.
2918 (IF7C, IF7D): New. Use D16.
2919 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2921 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2922 message. Issue an error if the branch offset is odd.
2924 * v850-opc.c: Add notes about needing special insert/extract
2925 for all the load/store insns, except "ld.b" and "st.b".
2927 * v850-opc.c (insert_d22, extract_d22): New functions.
2928 (v850_operands): Use insert_d22 and extract_d22 for
2930 (insert_d9): Fix range check.
2932 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2934 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2935 and set bits field to D9 and D22 operands.
2937 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2939 * v850-opc.c (v850_operands): Define SR2 operand.
2940 (v850_opcodes): "ldsr" uses R1,SR2.
2942 * v850-opc.c (v850_opcodes): Fix opcode specs for
2943 sld.w, sst.b, sst.h, sst.w, and nop.
2945 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2947 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2948 end of the opcode table.
2950 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2952 * d10v-opc.c (pre_defined_registers): Added register pairs,
2953 "r0-r1", "r2-r3", etc.
2955 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2957 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2958 Create I16U for an unsigned 16bit mmediate operand.
2959 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2961 * v850-opc.c (v850_operands): Define EP operand.
2962 (IF4A, IF4B, IF4C, IF4D): Use EP.
2964 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2965 with immediate operand, "movhi". Tweak "ldsr".
2967 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2968 correct. Get sld.[bhw] and sst.[bhw] closer.
2970 * v850-opc.c (v850_operands): "not" is a two byte insn
2972 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2974 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2976 * v850-opc.c (two): Get order of words correct.
2978 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2980 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2981 register source and destination operands.
2982 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2984 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2985 same thinko in "trap" opcode.
2987 * v850-opc.c (v850_opcodes): Add initializer for size field
2990 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2991 Add D8 for 8-bit unsigned field in short load/store insns.
2992 (IF4A, IF4D): These both need two registers.
2993 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2994 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2995 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2996 for "ldsr" and "stsr".
2997 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3000 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3001 short store word (sst.w).
3003 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3005 * v850-opc.c (v850_operands): Added insert and extract fields,
3006 pointers to functions that handle unusual operand encodings.
3008 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3010 * v850-opc.c (v850_opcodes): Enable "trap".
3012 * v850-opc.c (v850_opcodes): Fix order of displacement
3013 and register for "set1", "clr1", "not1", and "tst1".
3015 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3017 * v850-opc.c (v850_operands): Add "B3" support.
3018 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3021 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3023 * v850-opc.c: Close unterminated comment.
3025 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3027 * v850-opc.c (v850_operands): Add flags field.
3028 (v850_opcodes): add move opcodes.
3030 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3032 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3033 * configure: (bfd_v850v_arch) Add new case.
3034 * configure.in: (bfd_v850_arch) Add new case.
3035 * v850-opc.c: New file.
3037 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3039 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3041 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3043 * d10v-opc.c: Add additional information to the opcode
3044 table to help determinine which instructions can be done
3047 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3049 * mpw-make.sed: Update editing of include pathnames to be
3052 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3054 * arm-opc.h: Added "bx" instruction definition.
3056 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3058 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3060 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3062 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3064 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3066 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3068 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3070 * makefile.vms: Update for alpha-opc changes.
3072 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3074 * i386-dis.c (print_insn_i386): Actually return the correct value.
3075 (ONE, OP_ONE): #ifdef out; not used.
3077 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3079 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3080 Changed subi operand type to treat 0 as 16.
3082 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3084 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3087 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3089 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3090 memory transfer instructions. Add new format string entries %h and %s.
3091 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3094 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3096 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3097 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3099 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3101 * alpha-dis.c (print_insn_alpha_osf): Remove.
3102 (print_insn_alpha_vms): Remove.
3103 (print_insn_alpha): Make globally visible. Chose the register
3104 names based on info->flavour.
3105 * disassemble.c: Always return print_insn_alpha for the alpha.
3107 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3109 * d10v-dis.c (dis_long): Handle unknown opcodes.
3111 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3113 * d10v-opc.c: Changes to support signed and unsigned numbers.
3114 All instructions with the same name that have long and short forms
3115 now end in ".l" or ".s". Divs added.
3116 * d10v-dis.c: Changes to support signed and unsigned numbers.
3118 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3120 * d10v-dis.c: Change all functions to use info->print_address_func.
3122 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3124 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3125 move ccr/sr insns more strict so that the disassembler only
3126 selects them when the addressing mode is data register.
3128 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3129 * d10v-opc.c (pre_defined_registers): Declare.
3130 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3131 to pick a better name for the registers.
3133 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3135 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3136 operands for fexpand and fpmerge. From Christian Kuehnke
3137 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3139 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3141 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3142 print routine. Take new regnames and cpumask arguments.
3143 Kill the environment variable nonsense.
3144 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3145 (print_insn_alpha_vms): New function. Do VMS style regnames.
3146 * disassemble.c (disassembler): Test bfd flavour to pick
3147 between OSF and VMS routines. Default to OSF.
3149 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3151 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3152 * configure: Rebuild.
3153 * Makefile.in (install): Use @INSTALL_SHLIB@.
3155 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3157 * configure: (bfd_d10v_arch) Add new case.
3158 * configure.in: (bfd_d10v_arch) Add new case.
3159 * d10v-dis.c: New file.
3160 * d10v-opc.c: New file.
3161 * disassemble.c (disassembler) Add entry for d10v.
3163 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3165 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3166 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3168 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3170 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3171 distinguish between variants of the instruction set.
3172 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3173 distinguish between variants of the instruction set.
3175 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3177 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3178 the 8086 instruction set.
3179 * i386-dis.c: General cleanups. Make most things static. Add
3180 prototypes. Get rid of static variables aflags and dflags. Pass
3181 them as args (to almost everything).
3183 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3185 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3187 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3189 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3190 if the next arg is marked with SRC_IN_DST. Gross.
3192 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3193 we're looking for and find EXR.
3195 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3196 if we're looking for KBIT and we don't find it.
3198 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3201 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3202 3bit immediate operands.
3204 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3206 * Released binutils 2.7.
3208 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3209 <kkaempf@progis.ac-net.de>.
3211 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3213 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3215 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3217 * sparc-dis.c (print_insn_sparclite): New routine to print
3218 sparclite instructions.
3220 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3222 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3224 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3226 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3227 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3228 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3230 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3232 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3233 Use autoconf-set values.
3234 (docdir, oldincludedir): Removed.
3235 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3237 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3239 * alpha-opc.c: New file.
3240 * alpha-opc.h: Remove.
3241 * alpha-dis.c: Complete rewrite to use new opcode table.
3242 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3243 * configure: Rebuild with autoconf 2.10.
3244 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3245 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3247 (alpha-opc.o): New target.
3249 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3251 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3252 Set imm_added_to_rs1 even if the source and destination register
3255 * sparc-opc.c: Add some two operand forms of the wr instruction.
3257 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3259 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3262 * disassemble.c (disassembler): Handle H8/S.
3263 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3265 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3267 * sparc-opc.c: Add beq/teq as aliases for be/te.
3269 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3270 <sergei@msil.sps.mot.com>.
3272 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3274 * makefile.vms: New file.
3276 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3278 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3280 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3283 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3285 * i386-dis.c (OP_OFF): Call append_prefix.
3287 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3289 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3290 unsigned long to silence a warning from the Solaris PowerPC
3293 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3295 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3297 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3299 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3301 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3302 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3303 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3304 cpush, cpusha, cpull sparclet insns.
3306 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3308 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3310 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3313 Set F_FLOAT on other floating point instructions.
3315 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3317 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3319 (powerpc_opcodes): Add 860/821 specific SPRs.
3321 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3323 * configure.in: Permit --enable-shared to specify a list of
3324 directories. Set and substitute BFD_PICLIST.
3325 * configure: Rebuild.
3326 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3327 uses. Set to @BFD_PICLIST@.
3329 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3331 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3332 not "abs", which may be needed for the absolute in something
3333 like btst #0,@10:8. Print L_3 immediates separately from other
3334 immediates. Change ABSMOV reference to ABS8MEM.
3336 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3338 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3339 (current_arch_mask): New static global.
3340 (compute_arch_mask): New static function.
3341 (print_insn_sparc): Delete sparc_v9_p. New static local
3342 current_mach. Resort opcode table if current_mach changes.
3343 Generalize "insn not supported" test.
3344 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3345 Delete test for v9/!v9.
3346 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3348 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3349 (brfcx): Renamed to FBRX.
3350 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3351 coprocessor mnemonics are not supported on the sparclet).
3352 (condf): Renamed to CONDF.
3353 (SLCBCC2): Delete F_ALIAS flag.
3355 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3357 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3358 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3360 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3362 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3363 that the shared library version number is set correctly.
3365 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3367 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3368 Miles Bader <miles@gnu.ai.mit.edu>.
3369 * configure: Rebuild.
3371 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3373 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3376 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3378 * configure: Rebuild with autoconf 2.8.
3380 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3382 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3383 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3385 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3387 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3388 since they appear as targets in Makefile.in.
3389 * configure: Rebuild.
3391 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3393 * mpw-make.sed: Edit out shared library support bits.
3395 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3397 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3398 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3399 (sparc_opcodes): Add sparclet insns.
3400 (sparclet_cpreg_table): New static local.
3401 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3402 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3404 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3406 * i386-dis.c (index16): New static variable.
3407 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3409 (OP_indirE): Return result of OP_E.
3410 (OP_E): Check for 16 bit addressing mode, and disassemble
3411 correctly. Optimised 32 bit case a little. Don't print
3412 "(base,index,scale)" when sib specifies only an offset.
3414 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3416 * configure.in: Set and substitute SHLIB_DEP.
3417 * configure: Rebuild.
3418 * Makefile.in (SHLIB_DEP): New variable.
3419 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3420 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3421 COMMON_SHLIB, add them to piclist with appropriate modifications.
3422 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3423 here: just use piclist.
3425 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3427 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3428 (print_insn_sparc): Rewrite v9/not-v9 tests.
3429 (compare_opcodes): Likewise.
3430 * sparc-opc.c (MASK_<ARCH>): Define.
3431 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3432 (sparclet,v6notv9): Define.
3433 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3434 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3436 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3438 * configure.in: Call AC_PROG_CC before configure.host.
3439 * configure: Rebuild.
3441 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3443 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3445 * i386-dis.c (onebyte_has_modrm): New static array.
3446 (twobyte_has_modrm): New static array.
3447 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3449 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3451 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3454 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3456 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3459 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3462 m68010up, not just m68020up | cpu32.
3464 * Makefile.in (SONAME): New variable.
3465 ($(SHLINK)): Make a link to the transformed name, as well.
3466 (stamp-tshlink): New target.
3467 (install): Skip stamp-tshlink during install.
3469 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * configure.in: Call AC_ARG_PROGRAM.
3472 * configure: Rebuild.
3473 * Makefile.in (program_transform_name): New variable.
3474 (install): Transform library name before installing it.
3476 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3478 * i960-dis.c (mem): Add HX dcinva instruction.
3480 Support for building as a shared library, based on patches from
3481 Alan Modra <alan@spri.levels.unisa.edu.au>:
3482 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3483 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3484 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3485 * configure: Rebuild.
3486 * Makefile.in (ALLLIBS): New variable.
3487 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3488 (COMMON_SHLIB, SHLINK): New variables.
3489 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3490 (STAGESTUFF): Remove variable.
3491 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3492 (stamp-piclist, piclist): New targets.
3493 ($(SHLIB), $(SHLINK)): New targets.
3494 ($(OFILES)): Depend upon stamp-picdir.
3495 (disassemble.o): Build twice if PICFLAG is set.
3496 (MOSTLYCLEAN): Add pic/*.o.
3497 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3498 (distclean): Remove pic and stamp-picdir.
3499 (install): Install shared libraries.
3500 (stamp-picdir): New target.
3502 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3504 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3505 Print unknown instruction as "unknown", rather than in hex.
3507 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3509 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3511 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3513 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3515 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3518 when necessary. From Ulrich Drepper
3519 <drepper@myware.rz.uni-karlsruhe.de>.
3521 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3523 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3524 sparc_num_opcodes. Update architecture enum values.
3525 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3526 (sparc_opcode_lookup_arch): New function.
3527 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3528 (sparc_opcodes): Add v9a shutdown insn.
3530 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3532 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3533 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3535 (print_insn_sparc64): Deleted.
3536 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3539 * sparc-opc.c (architecture_pname): Add v9a.
3541 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3543 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3544 incorrectly defined as 0x16 when it should be 0x15.
3545 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3546 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3547 excb (exception barrier) which is defined in the Alpha
3548 Architecture Handbook version 2.
3549 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3550 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3551 disassembled as or, for example.
3553 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3555 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3556 (_print_insn_mips): Change i from int to unsigned int.
3558 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3560 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3561 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3563 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3565 * i386-dis.c: Added Pentium Pro instructions.
3567 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3569 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3572 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3574 * sh-opc.h (sh_nibble_type): Added REG_B.
3575 (sh_arg_type): Added A_REG_B.
3576 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3578 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3580 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3582 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3584 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3586 * Makefile.in (distclean): Remove stamp-h. From Ronald
3587 F. Guilmette <rfg@monkeys.com>.
3589 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3591 From David Mosberger-Tang <davidm@azstarnet.com>:
3592 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3595 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3597 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3598 (sh_table): Added many SH3 opcodes.
3599 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3601 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3603 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3604 (subco,subco.): Mark this PPC, not PPCCOM.
3606 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3608 * configure: Rebuild with autoconf 2.7.
3610 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3612 * configure: Rebuild with autoconf 2.6.
3614 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3616 * configure.in: Sort list of architectures. Accept but do nothing
3617 for alliant, convex, pyramid, romp, and tahoe.
3619 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3621 * a29k-dis.c (print_special): Change num to unsigned int.
3623 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3625 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3628 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3630 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3631 * configure: Rebuilt.
3633 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3635 * configure.in: Add case for bfd_i860_arch.
3636 * configure: Rebuild.
3638 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3640 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3641 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3642 (NEXTDOUBLE): Likewise.
3643 (print_insn_m68k): Don't match fmoveml if there is more than one
3644 register in the list.
3645 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3647 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3649 * m68k-opc.c: Use #W rather than #w.
3650 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3652 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3654 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3655 and likewise for all the dbxx opcodes.
3657 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3659 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3661 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3663 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3664 the VR4100 specific instructions to the mips_opcodes structure.
3666 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3668 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3669 ugly Metrowerks bug in CW6, is fixed in CW7.
3671 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3673 * ppc-opc.c (whole file): Add flags for common/any support.
3675 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3677 * Makefile.in (BISON): Remove macro.
3678 (FLAGS_TO_PASS): Remove BISON.
3680 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3682 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3684 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3685 instructions that take no args by looking at the match mask.
3686 (print_insn_arg): Always print "%" before register names.
3687 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3688 [case '_']: Don't print "@#" before address.
3689 [case 'J']: Use "%s" as format string, not register name.
3690 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3692 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3694 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3697 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3699 From David Mosberger-Tang <davidm@azstarnet.com>
3701 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3702 (alpha_insn_set): added definitions for VAX floating point
3703 instructions (Unix compilers don't generate these, but handcoded
3704 assembly might still use them).
3706 * alpha-dis.c (print_insn_alpha): added support for disassembling
3707 the miscellaneous instructions in the Alpha instruction set.
3709 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3711 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3712 no longer create sysdep.h, sed ppc-opc.c to work around a
3713 serious Metrowerks C bug.
3714 * mpw-make.in: Remove.
3715 * mpw-make.sed: New file, used by mpw-configure to edit
3716 Makefile.in into an MPW makefile.
3718 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3720 * Makefile.in (maintainer-clean): New synonym for realclean.
3722 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3724 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3725 which use '0', '1', and '2' instead. Specify the proper size for
3726 a pmove immediate operand. Correct the pmovefd patterns to be
3727 moves to a register, not from a register.
3728 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3730 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3732 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3733 %psr, %wim, %tbr as F_NOTV9.
3735 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3737 * Makefile.in (Makefile): Just rebuild Makefile when running
3739 (config.h, stamp-h): New targets.
3740 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3741 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3742 rebuilding config.h.
3743 * configure: Rebuild.
3745 * mips-opc.c: Change unaligned loads and stores with "t,A"
3746 operands to use "t,A(b)".
3748 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3750 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3752 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3754 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3755 until 3 instead of until 2.
3757 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3759 * Makefile.in (ALL_CFLAGS): Define.
3760 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3761 (MOSTLYCLEAN): Add config.log.
3762 (distclean): Don't remove config.log.
3763 * configure.in: Substitute HDEFINES.
3764 * configure: Rebuild.
3766 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3768 * sh-opc.h (sh_arg_type): Add F_FR0.
3769 (sh_table, case fmac): Add F_FR0 as first argument.
3771 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3773 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3775 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3777 * sparc-dis.c: Remove all references to NO_V9.
3779 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3781 * aclocal.m4: Just include ../bfd/aclocal.m4.
3782 * configure: Rebuild.
3784 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3786 * sparc-dis.c (X_DISP19): Define.
3787 (print_insn, case 'G'): Use it.
3788 (print_insn, case 'L'): Sign extend displacement.
3790 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3792 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3793 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3794 host_makefile_frag or frags.
3795 * aclocal.m4: New file.
3796 * configure: Rebuild.
3797 * Makefile.in (INSTALL): Set to @INSTALL@.
3798 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3799 (INSTALL_DATA): Set to @INSTALL_DATA@.
3801 (AR_FLAGS): Set to rc rather than qc.
3802 (CC): Define as @CC@.
3803 (CFLAGS): Set to @CFLAGS@.
3804 (@host_makefile_frag@): Remove.
3805 (config.status): Remove dependency upon @frags@.
3807 * configure.in: ../bfd/config.bfd now just sets shell variables.
3808 Use them rather than looking through target Makefile fragments.
3809 * configure: Rebuild.
3811 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3813 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3815 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3817 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3818 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3821 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3822 (lookup_{name,value}): New functions.
3823 (prefetch_table): New static local.
3824 (sparc_{encode,decode}_prefetch): New functions.
3825 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3827 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3829 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3832 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3834 * sh-dis.c: Correct comment on first line of file.
3836 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3838 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3840 * sparc-opc.c (asi, membar): New static locals.
3841 (sparc_{encode,decode}_{asi,membar}): New functions.
3842 (sparc_opcodes, membar insn): Fix.
3843 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3844 Support decoding of membar masks.
3847 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3849 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3851 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3853 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3854 and likewise for the other branches. Add bhs as an alias for bcc,
3855 and likewise for the size variants. Add dbhs as an alias for
3858 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3860 * sh-opc.h (FP sts instructions): Update to match reality.
3862 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3864 * m68k-dis.c: (fpcr_names): Add % before all register names.
3865 (reg_names): Likewise.
3866 (print_insn_arg): Don't explicitly print % before register names.
3867 Add % before register names in static array names. In case 'r',
3868 print data registers as `@(Dn)', not `Dn@'. When printing a
3869 memory address, don't print @# before it.
3870 (print_indexed): Change base_disp and outer_disp from int to
3871 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3872 syntax. Sign extend 8 byte displacement correctly.
3873 (print_base): Print using MIT syntax. Print zpc when appropriate.
3874 Change parameter disp from int to bfd_vma.
3876 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3879 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3881 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3882 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3883 * sh-opc.h (sh_arg_type): Add new operand types.
3884 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3886 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3888 * Makefile.in (distclean): Remove generated file config.h.
3890 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3892 * Makefile.in (distclean): Remove generated file config.h.
3894 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3896 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3898 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3900 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3901 rather than numopcodes. Use m68k_opcodes rather than removed
3902 opcode function. Don't check F_ALIAS.
3903 (print_insn_arg): Change first parameter to be const char *.
3904 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3905 (m68k-opc.o): New target.
3906 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3907 * configure: Rebuild.
3909 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3911 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3912 (opcode_bits, opcode_hash_table): New variables.
3913 (opcodes_initialized): Renamed from opcodes_sorted.
3914 (build_hash_table): New function.
3915 (is_delayed_branch): Use hash table.
3916 (print_insn): Renamed from print_insn_sparc, made static.
3917 Build and use hash table. If !sparc64, ignore sparc64 insns,
3918 and vice-versa if sparc64.
3919 (print_insn_sparc, print_insn_sparc64): New functions.
3920 (compare_opcodes): Move sparc64 opcodes to end.
3921 Print commutative insns with constant second.
3922 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3924 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3926 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3927 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3928 avoids printing a delay slot in a delay slot.
3929 * sh-opc.h (sh_table): Fully bracket last entry.
3931 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3933 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3935 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3937 * configure.in: Get host_makefile_frag from ${srcdir}.
3939 * configure.in: Autoconfiscated. Check for string[s].h. Create
3940 config.h from config.in. Don't set up sysdep.h link.
3941 * sysdep.h: New file.
3942 * configure, config.in: New files, generated from configure.in.
3943 * Makefile.in: Updated to be processed autoconf-style.
3944 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3945 (Makefile): Depend on config.status.
3946 (config.status): New rule.
3947 * configure.bat: Update Makefile substitutions.
3949 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3951 * mips-opc.c (L1): Define.
3952 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3953 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3956 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3958 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3959 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3960 have multiple add units but only a single logical unit.
3962 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3963 shifted by 18, without any insertion or extraction function.
3964 (insert_cr, extract_cr): Remove.
3966 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3968 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3971 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3973 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3974 * sh-opc.h: Add copyright.
3976 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3978 * Makefile.in (crunch-m68k): Delete extra target accidentally
3979 checked in a while ago.
3981 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3983 * sh-opc.h (sh_table): Add SH3 support.
3985 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3987 * sh-opc.h: Added bsrf and braf.
3989 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3991 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3992 bogus [ls]fm{ea,fd} patterns.
3994 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3995 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3996 initialize it from memory. Make function static.
3997 (print_insn_{big,little}_arm): New functions.
3998 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3999 the correct endianness.
4001 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4003 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4006 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4008 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4009 17th, so that it builds again using GCC as the compiler.
4011 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4013 * mips-dis.c (print_insn_little_mips): Cast return value from
4014 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4015 expects an unsigned long, and that might be fewer words of
4016 argument storage (e.g., if bfd_vma is long long on a 32-bit
4018 (print_insn_big_mips): Likewise with bfd_getb32 value.
4019 (_print_insn_mips): Now static.
4021 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4023 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4024 gcc memory hog problem with initializer is fixed.
4026 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4028 Merge in support for Mac MPW as a host.
4029 (Old change descriptions retained for informational value.)
4031 * mpw-config.in (archname): Compute from the config.
4032 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4034 * mpw-config.in (target_arch): Compute from canonical target.
4035 (m68k, mips, powerpc, sparc): Add architectures.
4036 * mpw-make.in (disassemble.c.o): Add.
4037 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4039 * mpw-config.in (BFD_MACHINES): Set to a default value.
4040 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4042 * mpw-make.in (CSEARCH): Add extra-include to search path.
4044 * mpw-config.in (varargs.h): Don't create.
4045 (sysdep.h): Create using forward-include.
4046 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4048 * mpw-config.in: New file, MPW version of configure.in.
4049 * mpw-make.in: New file, MPW version of Makefile.in.
4051 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4053 * alpha-dis.c (print_insn_alpha): Put empty statement after
4056 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4058 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4059 (low_sign_extend): Likewise.
4060 (get_field): Delete unused function.
4061 (set_field, deposit_14, deposit_21): Likewise.
4063 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4065 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4068 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4070 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4072 * alpha-opc.h (OSF_ASMCODE): define
4073 print pal-code names as defined in App C of the
4074 Alpha Architecture Reference Manual
4076 * alpha-dis.c: cleaned up output
4077 print stylized code forms as defined in App A.4.3 of the
4078 Alpha Architecture Reference Manual
4080 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4082 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4084 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4087 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4089 * m68k-dis.c (opcode): New function. Returns address of opcode
4090 table entry given index, even if the opcode table was split to
4091 work around gcc bugs.
4092 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4094 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4095 (reg_names): Now const.
4096 (print_insn_arg): Arrays cacheFieldName and names now const.
4097 (print_indexed): Array scales now const.
4099 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4101 * ppc-opc.c: Sort recently added instructions by minor opcode
4102 number within major opcode number.
4104 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4106 * hppa-dis.c: Include libhppa.h.
4108 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4110 * mips-opc.c: Change dli to use M_DLI, and add dla.
4112 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4114 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4116 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4118 * mips-opc.c: Add r4650 mul instruction.
4120 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4122 * mips-opc.c: Add uld and usd macros for unaligned double load and
4125 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4127 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4128 mfdcr, mtdcr, icbt, iccci.
4130 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4132 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4133 signed char fields to shorts, more portable.
4135 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4137 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4138 char fields as signed chars, since they may have negative values.
4140 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4142 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4143 (mycroft@netbsd.org).
4145 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4147 From "Logg, Ed" <elogg@ea.com>:
4148 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4149 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4152 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4154 * ppc-opc.c: Changes based on patch from David Edelsohn
4155 <edelsohn@mhpcc.edu>.
4156 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4159 (insert_tbr): New static function.
4160 (extract_tbr): New static function.
4161 (XFXFXM_MASK, XFXM): Define.
4162 (XSPRBAT_MASK, XSPRG_MASK): Define.
4163 (powerpc_opcodes): Add instructions to access special registers by
4164 name. Add mtcr and mftbu.
4166 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4168 * mips-opc.c (P3): Define.
4169 (mips_opcodes): Add mad and madu.
4171 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4173 * configure.in: Add W65 support.
4174 * disassemble.c: Likewise.
4175 * w65-opc.h, w65-dis.c: New files.
4177 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4179 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4182 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4184 * mips-opc.c: Add dli as a synonym for li.
4186 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4188 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4189 print something for reserved opcode values, even if it won't
4192 * mips-dis.c (_print_insn_mips): When initializing, shift right
4193 and mask, to avoid sign extension problems on the Alpha.
4195 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4198 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4200 * sh-opc.h (mov.l gbr): Get direction right.
4201 * sh-dis.c (print_insn_shx): New function.
4202 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4203 print opcodes with right byte order.
4205 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4207 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4208 to avoid conflicts with getopt.
4210 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4212 * hppa-dis.c (print_insn_hppa): Read the instruction using
4213 bfd_getb32, so that it works on a little endian or 64 bit host.
4214 Remove unused local variable op.
4216 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4218 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4219 addu does not work correctly if -mips3.
4221 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4223 * a29k-dis.c (print_special): Add special register names defined
4224 on 29030, 29040 and 29050.
4225 (print_insn): Handle new operand type 'I'.
4227 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4229 * Makefile.in (INSTALL): Use top level install.sh script.
4231 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4233 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4234 that it works on a little endian host.
4236 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4238 * configure.in: Use ${config_shell} when running config.bfd.
4240 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4242 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4244 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4246 * a29k-dis.c (print_insn): Print the opcode.
4248 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4250 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4252 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4254 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4256 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4258 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4259 which store a value into memory.
4261 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4263 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4264 * arm-dis.c, arm-opc.h: New files.
4266 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4268 * Makefile.in (ns32k-dis.o): Add dependency.
4269 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4270 string, not as array of chars.
4272 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4274 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4276 * sparc-opc.c: Added sparclite extended FP operations, and
4277 versions of v9 impdep* instructions permitting specification of
4280 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4282 * i960-dis.c (reg_names): Now const.
4283 (struct sparse_tabent): New type, copied from array type in mem
4285 (ctrl): Local static array ctrl_tab now const.
4286 (cobr): Local static array cobr_tab now const.
4287 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4288 static variable mem_tab no longer explicitly initialized. Changed
4289 mem_init to const array of struct sparse_tabent.
4290 (reg): Local static variable reg_tab no longer explicitly
4291 initialized. Changed reg_init to const array of struct
4293 (ea): Local static array scale_tab now const.
4295 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4298 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4300 * configure.bat: the disassember needs to be enabled for
4301 "objdump -d" to work in djgpp.
4303 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4305 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4306 (invalid_float): Enabled general version, doesn't require running
4307 on ns32k host. Changed to take char* argument, and test for
4308 explicitly specified sizes, instead of using sizeof() on host CPU
4310 (INVALID_FLOAT): Cast first argument.
4311 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4312 list_P032, list_M032): Now const.
4313 (optlist, list_search): Made appropriate arguments now point to
4315 (print_insn_arg): Changed static array of one-character-string
4316 pointers into a static const array of characters; fixed sprintf
4317 statement accordingly.
4319 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4321 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4322 from distribution. A ns32k-dis.c from a previous distribution has
4323 been brought up to date and supports the new interface.
4325 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4327 * configure.in: add bfd_ns32k_arch target support.
4329 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4330 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4332 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4334 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4337 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4339 * h8300-dis.c, mips-dis.c: Don't use true and false.
4341 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4343 * configure.in: Change --with-targets to --enable-targets.
4345 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4347 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4348 opcodes to the first instruction with that opcode, to speed
4349 disassembly of large files. From ralphc@pyramid.com (Ralph
4352 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4354 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4356 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4358 * configure.bat: update to latest makefile.in
4360 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4362 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4363 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4364 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4365 slot insn is in a delay slot.
4366 * z8k-opc.h: (resflg): Fix patterns.
4367 * h8500-opc.h Fix CR insn patterns.
4369 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4371 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4372 "cmpl" before POWER versions, so that gas -many uses them.
4374 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4376 * disassemble.c: New file.
4377 * Makefile.in (OFILES): Add disassemble.o.
4378 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4379 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4380 binutils/configure.in.
4382 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4383 opcode being examined.
4385 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4387 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4388 (insert_ral, insert_ram, insert_ras): New functions.
4389 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4390 RAS for store with update.
4392 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4395 (edelsohn@npac.syr.edu).
4397 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4399 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4402 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4404 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4406 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4408 * ppc-opc.c (powerpc_operands): The signedp field has been
4409 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4410 instead. Add new operand SISIGNOPT.
4411 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4412 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4413 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4416 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4418 * i386-dis.c (struct private): Renamed to dis_private. `private'
4419 is a reserved word for dynix cc.
4421 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4423 * configure.in: Change error message to refer to bfd/config.bfd
4424 rather than bfd/configure.in.
4426 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4428 * ppc-opc.c: Define POWER2 as short alias flag.
4429 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4432 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4434 * i960-dis.c (print_insn_i960): Don't read a second word for
4435 opcodes 0, 1, 2 and 3.
4437 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4439 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4441 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4443 * m68881-ext.c: Removed; no longer used.
4444 * Makefile.in: Changed accordingly.
4446 * m68k-dis.c (ext_format_68881): Don't declare.
4447 (print_insn_m68k): If an instruction uses place 'i', it uses at
4448 least four fixed bytes.
4449 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4450 extended float, convert to double using floatformat_to_double, not
4451 ieee_extended_to_double, and fetch the data before converting it.
4453 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4455 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4456 davidj@ICSI.Berkeley.EDU (David Johnson).
4458 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4460 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4461 PowerPC uses bdnz[l][a].
4463 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4465 * dis-buf.c, i386-dis.c: Include sysdep.h.
4467 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4469 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4471 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4472 by Motorola PowerPC 601 with PPC_OPCODE_601.
4473 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4474 Disassemble Motorola PowerPC 601 instructions as well as normal
4475 PowerPC instructions.
4477 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4479 * i960-dis.c (reg, mem): Just use a static array instead of
4482 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4484 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4485 condition name index if this is for a negated condition.
4487 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4488 Floating point format for 'H' operand is backwards from normal
4489 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4490 operands (fmpyadd and fmpysub), handle bizarre register
4491 translation correctly for single precision format.
4493 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4494 or 'I' operands if the next format specifier is 'M' (fcmp
4495 condition completer).
4497 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4499 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4500 single number giving a bitmask for the MB and ME fields of an M
4501 form instruction. Change NB to accept 32, and turn it into 0;
4502 also turn 0 into 32 when disassembling. Seperated SH from NB.
4503 (insert_mbe, extract_mbe): New functions.
4504 (insert_nb, extract_nb): New functions.
4505 (SC_MASK): Mask out SA and LK bits.
4506 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4507 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4508 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4509 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4510 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4511 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4512 (powerpc_macros): Define table of macro definitions.
4513 (powerpc_num_macros): Define.
4515 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4516 if PPC_OPERAND_NEXT is set.
4518 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4520 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4521 char. Retrieve contents using bfd_getl32 instead of shifting.
4523 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4525 * ppc-opc.c: New file. Opcode table for PowerPC, including
4526 opcodes for POWER (RS/6000).
4527 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4528 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4529 (CFILES): Add ppc-dis.c.
4530 (ppc-dis.o, ppc-opc.o): New targets.
4531 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4533 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4535 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4536 No space before 'u', 'f', or 'N'.
4538 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4540 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4541 farther than we should.
4543 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4545 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4547 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4549 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4551 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4552 needs it, to prevent reading past the end of a section.
4554 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4556 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4557 Removed t,A case for la; always use t,A(b) case.
4559 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4561 From Ted Lemen <mellon@pepper.ncd.com>
4562 * mips-dis.c (print_insn_arg): Handle 'k'.
4563 * mips-opc.c: Make cache use k, not t.
4565 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4567 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4568 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4569 FLOAT_FORMAT_CODE to put out floating point register names.
4571 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4573 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4575 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4577 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4579 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4582 larger than 32. Moved dsxx32 variants first for disassembler.
4584 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4586 * z8kgen.c, z8k-opc.h: Add full lda information.
4588 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4590 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4591 movb instructions. Any necessary space will be emitted by
4592 the code to handle nullification completers.
4594 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4598 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4600 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4601 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4603 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4605 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4607 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4609 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4610 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4612 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4614 * m88k-dis.c (m88kdis): comment change. Remove space after
4616 (printop): handle new arg types DEC and XREG for m88110.
4618 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4620 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4621 type for absolute branch addresses. Delete special
4622 "ble" and "be" code in 'W' operand code.
4624 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4626 * mips-opc.c: Set hazard information correctly for branch
4627 likely instructions.
4629 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4631 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4632 info->fprintf_func for printing and info->print_address_func for
4635 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4637 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4639 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4641 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4642 Corrected second case of "b" for disassembler.
4644 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4646 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4647 to BFD swapping routines to correspond to BFD name changes.
4649 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4651 * mips-opc.c: Change div machine instruction to be z,s,t rather
4652 than s,t. Change div macro to be d,v,t rather than d,s,t.
4653 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4654 rem and remu which generates only the corresponding div
4655 instruction. This is for compatibility with the MIPS assembler,
4656 which only generates the simple machine instruction when an
4657 explicit destination of $0 is used.
4658 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4660 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4662 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4663 WR_31 hazard for bal, bgezal, bltzal.
4665 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4667 * hppa-dis.c (print_insn_hppa): Use print function
4668 from within the disassemble_info, not fprintf_filtered.
4670 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4672 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4673 Law, law@cs.utah.edu.)
4675 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4677 * mips-opc.c ("absu"): Removed.
4680 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4683 Changed hazard information to distinguish between memory load
4684 delays and coprocessor load delays.
4686 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4688 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4690 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4692 * configure.in: Don't pass cpu to config.bfd.
4694 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4696 * m88k-dis.c (m88kdis): Make class unsigned.
4698 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4700 * alpha-dis.c (print_insn_alpha): One branch format case was
4701 missing the instruction name.
4703 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4705 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4706 Add the arch-specific auxiliary files.
4707 (OFILES): Remove the arch-specific auxiliary files
4708 and use BFD_MACHINES instead of DIS_LIBS.
4709 * configure.in: Set BFD_MACHINES based on --with-targets option.
4711 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4716 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4718 * sparc-opc.c: Change CONST to const to deal with gcc
4719 -Dconst=__const -traditional.
4721 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4723 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4724 coprocessor instructions out of #if 0, and made them use new
4727 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4729 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4731 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4733 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4734 instruction, for use by the disassembler.
4736 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4737 hand-coded sign extensions that depended on 32-bit host ints.
4738 FIXME, we still depend on big-endian host bitfield ordering.
4739 (sparc_print_insn): Set the insn_info_valid field, and the
4740 other fields that describe the instruction being printed.
4742 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4744 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4745 `jmp' instead of just one of them.
4747 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4749 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4750 (fput_fp_reg_r): Renamed from fput_reg_r.
4751 (fput_fp_reg): New function.
4752 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4754 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4756 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4758 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4760 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4762 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4763 don't output a space.
4765 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4767 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4769 * mips-opc.c: New file, containing opcode table from
4770 ../include/opcode/mips.h.
4771 * Makefile.in: Add it.
4773 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4775 * m88k-dis.c: New file, moved in from gdb and changed to use the
4776 new dis-asm.h disassembler interface.
4777 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4778 (m88k-dis.o): New target.
4780 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4782 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4783 argument string const char * to correspond to opcode/mips.h.
4785 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4787 * mips-dis.c: Updated to account for name changes in new version
4789 * Makefile.in: Added header file dependencies.
4791 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4793 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4795 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4797 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4798 extend, rather than shifts.
4800 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4802 * Makefile.in: Undo 15 June change.
4804 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4806 * m68k-dis.c (print_insn_arg): Change return value to byte count
4808 * m68k-dis.c: Re-write to detect invalid operands before
4809 printing anything, so we can handle this the same way we
4810 handle invalid opcodes.
4812 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4814 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4816 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4818 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4821 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4823 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4825 * configure.in: Do make sysdep.h link.
4826 * Makefile.in: Search ../include. Don't search ../bfd.
4828 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4830 Changes from Jeff Law, law@cs.utah.edu:
4831 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4832 Do not print a space before the completers specified by
4835 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4837 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4838 defined, since gdb has been fixed.
4840 Changes from Jeff Law, law@cs.utah.edu:
4841 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4842 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4843 be a *disassemble_info, not a *FILE.
4844 * hppa-dis.c: Support 'd', '!', and 'a'.
4845 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4846 * hppa-dis.c: Delete cases which are no longer needed.
4848 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4850 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4852 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4854 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4857 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4859 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4860 * configure.in: No longer need to configure to get sysdep.h.
4862 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4864 * Patches from Jeffrey Law <law@cs.utah.edu>.
4865 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4866 templates for 1.1 FP computational instructions.
4868 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4870 * h8500-dis.c (print_insn_h8500): Address argument is type
4872 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4875 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4876 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4878 * sparc-dis.c (compare_opcodes): Move static declaration to
4881 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4883 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4884 instruction, remove unimp hack from 'l' argument.
4886 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4888 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4891 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4893 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4894 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4897 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4899 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4900 arrays of string pointers to 2-d arrays of chars, to save
4903 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4905 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4906 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4908 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4910 * hppa-dis.c: New file from Utah, adapted to new disassembler
4912 * Makefile.in: Include it.
4914 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4916 * sh-dis.c, sh-opc.h: New files.
4918 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4920 * alpha-dis.c, alpha-opc.h: New files.
4922 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4924 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4927 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4929 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4931 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4933 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4936 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4938 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4939 and double percent signs a few places.
4941 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4943 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4944 Use info->print_address_func not print_address.
4946 * dis-buf.c (generic_print_address): New function.
4948 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4950 * Makefile.in: Add sparc-dis.c.
4951 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4953 Add `add' instruction to the set that get checked
4954 for a preceding `sethi' in order to print an absolute address.
4955 * (print_insn): Disassembly prefers real instructions.
4956 (is_delayed_branch): Speed up.
4957 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4958 Still missing some float ops, and needs testing.
4959 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4960 F_ALIAS. Use printf, not fprintf, when not passing a file
4962 (compare_opcodes): Check that identical instructions have
4963 identical opcodes, complain otherwise.
4966 * Include reg_names.
4968 Use dis-asm.h/read_memory_func interface.
4970 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4972 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4973 deliberately return non-zero to setjmp from longjmp. Otherwise
4974 this code fails to compile.
4976 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4978 * m68k-dis.c: Fix prototype for fetch_arg().
4980 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4982 * dis-buf.c: New file, for new read_memory_func interface.
4983 Makefile.in (OFILES): Include it.
4984 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4985 Use new read_memory_func interface.
4987 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4989 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4990 * h8500-opc.h: Fix couple of opcodes.
4992 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4994 * Makefile.in: add dvi & installcheck targets
4996 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4998 * Makefile.in: Update for h8500-dis.c.
5000 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5002 * h8500-dis.c, h8500-opc.h: New files
5004 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5006 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5007 ../include/dis-asm.h.
5008 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5009 and ../gdb/m68k-pinsn.c).
5010 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5011 and ../gdb/i386-pinsn.c).
5012 * m68881-ext.c: New file. Moved definition of
5013 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5014 * Makefile.in: Adjust for new files.
5015 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5016 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5017 can be dis-assembled.
5019 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5021 * mips-dis.c (print_insn_arg): Now returns void.
5023 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5025 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5026 files that use the macros.
5028 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5031 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5032 (CFILES): Added mips-dis.c.
5034 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5036 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5037 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5039 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5041 * Makefile.in: Improve *clean rules.
5042 * configure.in: Allow a default host.
5044 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5046 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5047 files include other sysdep files
5049 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5051 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5053 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5055 * configure.in: For host support, use ../bfd/configure.host
5056 so it stays in sync with the ../bfd/hosts database.
5058 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5060 * configure.in: use cpu-vendor-os triple instead of nested cases
5062 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5064 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5065 *always* the wrong one.
5067 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5069 * z8kgen.c: added copyright info
5071 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5073 * z8k-dis.c (unparse_instr): prettier tabs
5074 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5076 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5078 * configure.in: Add ncr* configuration.
5079 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5080 picayune ANSI compilers happy.
5082 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5084 * configure.in (i386): Make i386 and i486 synonymous for now.
5085 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5087 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5089 * Makefile.in (install): Fix typo.
5091 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5093 * Makefile.in (make): Remove obsolete crud.
5094 (sparc-opc.o): Avoid Sun Make VPATH bug.
5096 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5098 * Makefile.in: since there are no SUBDIRS, remove rule and
5099 references of subdir_do.
5101 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5103 * Makefile.in (install): Get the library name right here too.
5104 Don't install bfd.h, since it's unrelated to this library. No
5105 subdirs to recurse into, either.
5106 (CFILES): The source file has a .c suffix, not .o.
5108 * sparc-opc.c: New file, moved from BFD.
5109 * Makefile.in (OFILES): Build it.
5111 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5113 * z8k-dis.c: fixed forward refferences of some declarations.
5115 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5117 * Makefile.in: get the name of the library right
5119 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5121 * z8k-dis.c: knows how to disassemble z8k stuff
5122 * z8k-opc.h: new file full of z8000 opcodes
5126 version-control: never