1 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
2 Stephane Carrez <stcarrez@nerim.fr>
4 * configure.in: Add S12X and XGATE co-processor support to m68hc11
6 * disassemble.c: Likewise.
7 * configure: Regenerate.
8 * m68hc11-dis.c: Make objdump output more consistent, use hex
9 instead of decimal and use 0x prefix for hex.
10 * m68hc11-opc.c: Add S12X and XGATE opcodes.
12 2012-05-14 James Lemke <jwlemke@codesourcery.com>
14 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
15 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
16 (vle_opcd_indices): New array.
17 (lookup_vle): New function.
18 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
19 (print_insn_powerpc): Likewise.
20 * ppc-opc.c: Likewise.
22 2012-05-14 Catherine Moore <clm@codesourcery.com>
23 Maciej W. Rozycki <macro@codesourcery.com>
24 Rhonda Wittels <rhonda@codesourcery.com>
25 Nathan Froyd <froydnj@codesourcery.com>
27 * ppc-opc.c (insert_arx, extract_arx): New functions.
28 (insert_ary, extract_ary): New functions.
29 (insert_li20, extract_li20): New functions.
30 (insert_rx, extract_rx): New functions.
31 (insert_ry, extract_ry): New functions.
32 (insert_sci8, extract_sci8): New functions.
33 (insert_sci8n, extract_sci8n): New functions.
34 (insert_sd4h, extract_sd4h): New functions.
35 (insert_sd4w, extract_sd4w): New functions.
36 (insert_vlesi, extract_vlesi): New functions.
37 (insert_vlensi, extract_vlensi): New functions.
38 (insert_vleui, extract_vleui): New functions.
39 (insert_vleil, extract_vleil): New functions.
40 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
41 (BI16, BI32, BO32, B8): New.
42 (B15, B24, CRD32, CRS): New.
43 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
44 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
45 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
46 (SH6_MASK): Use PPC_OPSHIFT_INV.
47 (SI8, UI5, OIMM5, UI7, BO16): New.
48 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
49 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
51 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
52 (OPVUP, OPVUP_MASK OPVUP): New
53 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
54 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
55 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
56 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
57 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
58 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
59 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
60 (SE_IM5, SE_IM5_MASK): New.
61 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
62 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
63 (BO32DNZ, BO32DZ): New.
64 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
66 (powerpc_opcodes): Add new VLE instructions. Update existing
67 instruction to include PPCVLE if supported.
68 * ppc-dis.c (ppc_opts): Add vle entry.
69 (get_powerpc_dialect): New function.
70 (powerpc_init_dialect): VLE support.
71 (print_insn_big_powerpc): Call get_powerpc_dialect.
72 (print_insn_little_powerpc): Likewise.
73 (operand_value_powerpc): Handle negative shift counts.
74 (print_insn_powerpc): Handle 2-byte instruction lengths.
76 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
79 * configure.in: Invoke ACX_HEADER_STRING.
80 * configure: Regenerate.
81 * config.in: Regenerate.
82 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
83 string.h and strings.h.
85 2012-05-11 Nick Clifton <nickc@redhat.com>
88 * arm-dis.c (print_insn): Fix detection of instruction mode in
89 files containing multiple executable sections.
91 2012-05-03 Sean Keys <skeys@ipdatasys.com>
93 * Makefile.in, configure: regenerate
94 * disassemble.c (disassembler): Recognize ARCH_XGATE.
95 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
97 * configure.in: Recognize xgate.
98 * xgate-dis.c, xgate-opc.c: New files for support of xgate
99 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
100 and opcode generation for xgate.
102 2012-04-30 DJ Delorie <dj@redhat.com>
104 * rx-decode.opc (MOV): Do not sign-extend immediates which are
105 already the maximum bit size.
106 * rx-decode.c: Regenerate.
108 2012-04-27 David S. Miller <davem@davemloft.net>
110 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
111 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
113 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
114 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
116 * sparc-opc.c (CBCOND): New define.
117 (CBCOND_XCC): Likewise.
118 (cbcond): New helper macro.
119 (sparc_opcodes): Add compare-and-branch instructions.
121 * sparc-dis.c (print_insn_sparc): Handle ')'.
122 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
124 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
125 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
127 2012-04-12 David S. Miller <davem@davemloft.net>
129 * sparc-dis.c (X_DISP10): Define.
130 (print_insn_sparc): Handle '='.
132 2012-04-01 Mike Frysinger <vapier@gentoo.org>
134 * bfin-dis.c (fmtconst): Replace decimal handling with a single
135 sprintf call and the '*' field width.
137 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
139 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
141 2012-03-16 Alan Modra <amodra@gmail.com>
143 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
144 (powerpc_opcd_indices): Bump array size.
145 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
146 corresponding to unused opcodes to following entry.
147 (lookup_powerpc): New function, extracted and optimised from..
148 (print_insn_powerpc): ..here.
150 2012-03-15 Alan Modra <amodra@gmail.com>
151 James Lemke <jwlemke@codesourcery.com>
153 * disassemble.c (disassemble_init_for_target): Handle ppc init.
154 * ppc-dis.c (private): New var.
155 (powerpc_init_dialect): Don't return calloc failure, instead use
157 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
158 (powerpc_opcd_indices): New array.
159 (disassemble_init_powerpc): New function.
160 (print_insn_big_powerpc): Don't init dialect here.
161 (print_insn_little_powerpc): Likewise.
162 (print_insn_powerpc): Start search using powerpc_opcd_indices.
164 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
166 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
167 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
168 (PPCVEC2, PPCTMR, E6500): New short names.
169 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
170 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
171 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
172 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
173 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
174 optional operands on sync instruction for E6500 target.
176 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
178 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
180 2012-02-27 Alan Modra <amodra@gmail.com>
182 * mt-dis.c: Regenerate.
184 2012-02-27 Alan Modra <amodra@gmail.com>
186 * v850-opc.c (extract_v8): Rearrange to make it obvious this
187 is the inverse of corresponding insert function.
188 (extract_d22, extract_u9, extract_r4): Likewise.
189 (extract_d9): Correct sign extension.
190 (extract_d16_15): Don't assume "long" is 32 bits, and don't
191 rely on implementation defined behaviour for shift right of
193 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
194 (extract_d23): Likewise, and correct mask.
196 2012-02-27 Alan Modra <amodra@gmail.com>
198 * crx-dis.c (print_arg): Mask constant to 32 bits.
199 * crx-opc.c (cst4_map): Use int array.
201 2012-02-27 Alan Modra <amodra@gmail.com>
203 * arc-dis.c (BITS): Don't use shifts to mask off bits.
204 (FIELDD): Sign extend with xor,sub.
206 2012-02-25 Walter Lee <walt@tilera.com>
208 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
209 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
210 TILEPRO_OPC_LW_TLS_SN.
212 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
214 * i386-opc.h (HLEPrefixNone): New.
215 (HLEPrefixLock): Likewise.
216 (HLEPrefixAny): Likewise.
217 (HLEPrefixRelease): Likewise.
219 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
221 * i386-dis.c (HLE_Fixup1): New.
222 (HLE_Fixup2): Likewise.
223 (HLE_Fixup3): Likewise.
230 (MOD_C6_REG_7): Likewise.
231 (MOD_C7_REG_7): Likewise.
232 (RM_C6_REG_7): Likewise.
233 (RM_C7_REG_7): Likewise.
234 (XACQUIRE_PREFIX): Likewise.
235 (XRELEASE_PREFIX): Likewise.
236 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
237 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
238 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
239 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
240 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
241 MOD_C6_REG_7 and MOD_C7_REG_7.
242 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
243 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
245 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
246 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
248 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
250 (cpu_flags): Add CpuHLE and CpuRTM.
251 (opcode_modifiers): Add HLEPrefixOk.
253 * i386-opc.h (CpuHLE): New.
255 (HLEPrefixOk): Likewise.
256 (i386_cpu_flags): Add cpuhle and cpurtm.
257 (i386_opcode_modifier): Add hleprefixok.
259 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
260 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
261 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
262 operand. Add xacquire, xrelease, xabort, xbegin, xend and
264 * i386-init.h: Regenerated.
265 * i386-tbl.h: Likewise.
267 2012-01-24 DJ Delorie <dj@redhat.com>
269 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
270 * rl78-decode.c: Regenerate.
272 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
275 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
277 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
279 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
280 register and move them after pmove with PSR/PCSR register.
282 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
284 * i386-dis.c (mod_table): Add vmfunc.
286 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
287 (cpu_flags): CpuVMFUNC.
289 * i386-opc.h (CpuVMFUNC): New.
290 (i386_cpu_flags): Add cpuvmfunc.
292 * i386-opc.tbl: Add vmfunc.
293 * i386-init.h: Regenerated.
294 * i386-tbl.h: Likewise.
296 For older changes see ChangeLog-2011
302 version-control: never