1 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
3 * configure: Only build libopcodes shared if --enable-shared's value
4 was `yes', or was set to `*opcodes*'.
5 * aclocal.m4: Likewise.
8 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
10 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
13 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
15 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
16 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
17 offset forms before the 15 bit forms, to default to the long forms.
20 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
22 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
24 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
26 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
27 symbol if none is present.
28 (print_insn_big_arm): Prevent examination of stored symbol if
31 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
33 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
35 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
37 * disassemble.c: Remove disasm_symaddr() function.
39 * arm-dis.c: Use info->symbol instead of info->flags to determine
40 if disassmbly should be in Thumb or Arm mode.
42 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
44 * arm-dis.c: Add support for disassembling Thumb opcodes.
45 (print_insn_thumb): New function.
47 * disassemble.c (disasm_symaddr): New function.
49 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
50 (thumb_opcodes): Table of Thumb opcodes.
52 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
54 * m68k-opc.c (btst): Change Dd@s to Dd;b.
56 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
57 and 'v' as operand types.
59 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
61 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
62 <olivier.carmona@di.epfl.ch>.
63 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
64 which has a two word opcode with a one word argument.
67 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
69 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
71 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
75 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
77 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
78 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
79 (ftrv): Slay the cut-and-paste monster.
82 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
84 * d10v-dis.c (print_operand):
85 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
87 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
89 * d10v-opc.c (OPERAND_FLAG): Split into:
90 (OPERAND_FFLAG, OPERAND_CFLAG) .
94 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
96 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
97 field for all INSN_MACRO's.
100 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
102 * mips-opc.c (sync,cache): These are 3900 insns.
104 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
106 sh-opc.h (sh_table): Remove ftst/nan.
108 start-sanitize-vr5400
109 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
111 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
112 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
114 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
118 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
120 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
121 Add tx49 insns and configury.
124 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
126 * mips-opc.c (ffc, ffs): Fix mask.
129 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
131 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
135 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
137 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
138 start-sanitize-vr5400
139 Added VR5400 instructions.
140 (N5): New cpu-id macro.
142 (WR_HILO, RD_HILO, MOD_HILO): New macros.
144 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
146 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
147 (WR_HILO, RD_HILO, MOD_HILO): New macros.
149 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
151 * v850-dis.c (disassemble): Replace // with /* ... */
153 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
155 * sparc-opc.c: Add wr & rd for v9a asr's.
156 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
157 (v9a_asr_reg_names): New variable.
158 Patch from David Miller <davem@vger.rutgers.edu>.
160 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
162 * sparc-opc.c (v9notv9a): New insn type.
163 (IMPDEP): Move to the end to not conflict with edge8 et al.
164 Patch from David Miller <davem@vger.rutgers.edu>.
166 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
168 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
170 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
172 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
174 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
176 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
177 of disassemble_info structure to determine if an overlay address
178 has a matching symbol in low memory.
180 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
181 new symbol_at_address_func field in disassemble_info structure.
183 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
185 * v850-opc.c (extract_d22): Use signed arithmatic.
187 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
189 * mips-opc.c: Three op mult is not an ISA insn.
191 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
193 * mips-opc.c: Fix formatting.
195 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
197 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
198 than assuming that char is signed. Explicitly sign extend 16 bit
199 values, rather than assuming that short is 16 bits.
200 (OP_sI, OP_J, OP_DIR): Likewise.
203 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
205 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
209 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
211 * v850-opc.c: Fix typo in comment.
213 * v850-dis.c (disassemble): Add test of processor type when
216 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
218 * configure.in: Use a diversion to set enable_shared before the
219 arguments are parsed.
220 * configure: Rebuild.
222 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
224 * m68k-opc.c (TBL1): Use ! rather than `.
225 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
227 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
229 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
231 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
233 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
236 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
237 * aclocal.m4: Rebuild with new libtool.
238 * configure: Rebuild.
241 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
243 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
246 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
248 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
250 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
252 * v850-opc.c (v850_opcodes): Further rearrangements.
255 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
257 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
260 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
262 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
265 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
267 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
269 * mips16-opc.c: Added mips16 sdbbp.
272 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
274 * v850-opc.c: Initialise processors field of v850_opcode structure.
277 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
279 Merge changes from Martin Hunt:
281 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
283 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
284 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
285 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
287 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
289 * d30v-dis.c (print_insn): First operand of d*i (delayed
290 branch) instructions is relative.
292 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
293 (d30v_operand_table): Add IMM6S3 type.
294 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
296 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
297 and cmp instructions.
299 * d30v-opc.c: Correct entries for repeat*, and sat*.
300 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
301 types. Correct several formats.
303 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
305 * d30v-opc.c (pre_defined_registers): Change control registers.
307 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
308 SHORT_C2. Manual was incorrect.
310 * d30v-dis.c (lookup_opcode): Return value now indicates
311 if an opcode has a short and a long form. Used for deciding
312 to append a ".s" or ".l".
313 (print_insn): Append a ".s" to an instruction if it is
314 the short form and ".l" if it is a long form. Do not append
315 anything if the instruction has only one possible size.
317 * d30v-opc.c: Change mulx2h to require an even register.
318 New form: SHORT_A2; a SHORT_A form that needs an even
319 register as the first operand.
321 * d30v-dis.c (print_insn_d30v): Fix problem where the last
322 instruction was not being disassembled if there were an odd
323 number of instructions.
325 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
329 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
331 * v850-dis.c (disassemble): Improved display of register lists.
334 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
336 * sparc-opc.c (sparc_opcodes): Fix assembler args to
337 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
338 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
339 fandnot1s, fandnot2s.
341 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
343 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
345 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
347 * cgen-asm.c (cgen_parse_address): New argument resultp.
349 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
351 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
353 * mn10200-dis.c (disassemble): PC relative instructions are
354 relative to the next instruction, not the current instruction.
356 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
358 * v850-dis.c (disassemble): Only signed extend values that are not
359 returned by extract functions.
360 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
362 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
364 * v850-opc.c: Update comments. Remove use of
365 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
367 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
369 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
371 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
373 * configure: Rebuilt with latest devo autoconf for NT support.
375 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
377 * v850-dis.c (disassemble): Use curly brace syntax for register
380 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
381 where r0 is being used as a destination register.
384 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
386 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
390 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
392 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
393 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
394 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
395 Add insns to access SGR and DBR.
396 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
399 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
401 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
404 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
406 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
407 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
410 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
412 * configure (cgen_files): Add support for v850e target.
413 * configure.in (cgen_files): Add support for v850e target.
415 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
417 * configure (cgen_files): Add support for v850ea target.
418 * configure.in (cgen_files): Add support for v850ea target.
421 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
423 * configure.in (bfd_arc_arch): Add.
424 * configure: Rebuild.
425 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
426 * Makefile.in: Rebuild.
427 * arc-dis.c, arc-opc.c: New files.
428 * disassemble.c (ARCH_all): Define ARCH_arc.
429 (disassembler): Add ARC support.
431 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
434 * v850-dis.c (disassemble): Add support for v850EA instructions.
436 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
437 (v850_opcodes): Add v850EA instructions.
439 * v850-dis.c (disassemble): Add support for v850E instructions.
441 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
442 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
443 insert_spe, extract_spe): New Functions.
444 (v850_opcodes): Add v850E instructions.
447 * v850-opc.c: Reorganised and re-layed out to improve readability
450 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
452 * configure: Rebuild with autoconf 2.12.1.
454 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
456 * aclocal.m4, configure: Rebuild with new automake patches.
458 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
460 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
461 * acinclude.m4: Just include acinclude.m4 from BFD.
462 * aclocal.m4, configure: Rebuild.
464 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
466 * Makefile.am: New file, based on old Makefile.in.
467 * acconfig.h: New file.
468 * acinclude.m4: New file.
469 * stamp-h.in: New file.
470 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
471 Removed shared library handling; now handled by libtool. Replace
472 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
473 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
474 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
475 handling in AC_OUTPUT.
476 * dep-in.sed: Change .o to .lo.
477 * Makefile.in: Now built with automake.
478 * aclocal.m4: Now built with aclocal.
479 * config.in, configure: Rebuild.
481 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
483 * mips-opc.c: Fix typo/thinko in "eret" instruction.
486 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
488 * mips-opc.c: Fix coding of mtsa.
491 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
493 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
495 * sparc-dis.c (sorted_opcodes): New static local.
496 (struct opcode_hash): `opcode' is pointer to const element.
497 (build_hash): First arg is now table of sorted pointers.
498 (print_insn_sparc): Sort opcodes by sorting table of pointers.
499 (compare_opcodes): Update.
501 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
503 * cgen-opc.c: #include <ctype.h>.
504 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
505 Handle case insensitive hashing.
506 (hash_keyword_value): Change type of `value' to unsigned int.
508 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
510 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
511 precision FP, mark it as such. Likewise for double precision
512 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
515 (mips_builtin_opcodes): Remove non-existant r5900 instructions
519 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
521 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
522 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
525 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
527 * ppc-opc.c (extract_nsi): make unsigned expression signed before
529 (UNUSED): remove one level of parens, so MSVC doesn't choke on
530 nesting depth when all the macros are expanded.
532 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
534 * sparc-opc.c: The fcmp v9a instructions take an integer register
535 as a destination, not a floating point register. From Christian
536 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
538 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
540 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
541 syntax. From Roman Hodek
542 <rnhodek@faui22c.informatik.uni-erlangen.de>.
544 * i386-dis.c (twobyte_has_modrm): Fix pand.
546 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
548 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
550 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
552 * arm-dis.c: Add prototypes for arm_decode_shift and
555 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
557 * mips-opc.c: Add r3900 insns.
559 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
561 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
562 print delay slot instructions on the same line. When using a PC
563 relative load, add a comment with the value being loaded if it can
566 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
568 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
569 to pushS/popS for segment regs and byte constant so that
570 pushw/popw printed when in 16 bit data mode.
572 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
573 print cbtw, cwtd in 16 bit data mode.
574 * i386-dis.c (putop): extra case W to support above.
576 * i386-dis.c (print_insn_x86): print addr32 prefix when given
577 address size prefix in 16 bit address mode.
579 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
581 * sh-dis.c: Reindent. Rename local variable fprintf to
584 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
586 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
588 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
590 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
592 * mips16-opc.c (mip16_opcodes): same.
594 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
596 * m68k-opc.c (moveb): Change $d to %d.
598 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
600 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
601 (twobyte_has_modrm): Likewise.
603 (OP_MMX, OP_EM, OP_MS): New static functions.
605 * i386-dis.c: Revert patch of April 4. The output now matches
608 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
610 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
613 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
615 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
617 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
619 * Makefile.in (install): Depend upon installdirs.
620 (installdirs): New target.
622 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
624 From Thomas Graichen <graichen@rzpd.de>:
625 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
626 * configure: Rebuild.
628 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
630 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
631 Delete string{,s}.h support.
633 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
635 * cgen-asm.c (cgen_parse_operand_fn): New global.
636 (cgen_parse_{{,un}signed_integer,address}): Update call to
637 cgen_parse_operand_fn.
638 (cgen_init_parse_operand): New function.
639 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
640 from cgen_asm_init_parse.
641 (m32r_cgen_assemble_insn): New operand `errmsg'.
642 Delete call to as_bad, return error message to caller.
643 (m32r_cgen_asm_hash_keywords): #if 0 out.
645 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
647 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
649 [case 'J']: Fix typo in register name.
651 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
653 * configure.in: Substitute SHLIB_LIBS.
654 * configure: Rebuild.
655 * Makefile.in (SHLIB_LIBS): New variable.
656 ($(SHLIB)): Use $(SHLIB_LIBS).
658 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
660 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
662 * cgen-opc.c (hash_keyword_name): Improve algorithm.
664 * disassemble.c (disassembler): Handle m32r.
666 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
668 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
669 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
670 * Makefile.in (CFILES): Add them.
671 (ALL_MACHINES): Add them.
672 (dependencies): Regenerate.
673 * configure.in (cgen_files): New variable.
674 (bfd_m32r_arch): Add entry.
675 * configure: Regenerate.
677 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
679 * configure.in: Correct file names for bfd_mn10[23]00_arch.
680 * configure: Rebuild.
682 * Makefile.in: Rebuild dependencies.
684 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
686 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
689 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
691 * Branched binutils 2.8.
693 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
695 * m10200-dis.c: Rename from mn10200-dis.c.
696 * m10200-opc.c: Rename from mn10200-opc.c.
697 * m10300-dis.c: Rename from mn10300-dis.c
698 * m10300-opc.c: Rename from mn10300-opc.c.
699 * Makefile.in: Update accordingly.
701 * mips16-opc.c: Add mul and dmul macros.
703 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
705 * makefile.vms: Update CFLAGS, add clean target.
707 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
709 * mips-opc.c: Add "wait". From Ralf Baechle
710 <ralf@gnu.ai.mit.edu>.
712 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
713 * configure, config.in: Rebuild.
714 * sysdep.h: Include <stdlib.h> if it exists.
715 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
717 * Makefile.in: Rebuild dependencies.
719 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
721 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
722 Andrew Bray <andy@madhouse.demon.co.uk>.
724 * mips-opc.c: Add cast when setting mips_opcodes.
726 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
728 * v850-dis.c (disassemble): Fix sign extension problem.
729 * v850-opc.c (extract_d*): Fix sign extension problems to make
730 disassembly calculate branch offsets correctly.
732 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
734 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
736 * mips-opc.c: Add dctr and dctw.
739 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
741 * d30v-dis.c (print_insn): Change the way signed constants
744 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
746 * Makefile.in (BFD_H): New variable.
747 (HFILES): New variable.
748 (CFILES): Add all C files.
749 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
750 Delete old dependencies, and build new ones.
751 * dep-in.sed: New file.
753 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
755 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
757 start-sanitize-coldfire
758 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
760 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
763 end-sanitize-coldfire
764 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
766 * mn10200-opc.c: Change "trap" to "syscall".
767 * mn10300-opc.c: Add new "syscall" instruction.
769 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
771 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
772 mulul insns on the coldfire.
774 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
776 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
777 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
778 (print_insn_little_arm): Likewise.
780 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
782 Based on patches from H.J. Lu <hjl@lucon.org>:
783 * i386-dis.c (fetch_data): Add prototype.
784 * m68k-dis.c (fetch_data): Add prototype.
785 (dummy_print_address): Add prototype. Make static.
786 * ppc-opc.c (valid_bo): Add prototype.
787 * sparc-dis.c (build_hash_table): Add prototype.
788 (is_delayed_branch, compute_arch_mask): Add prototypes.
789 (print_insn_sparc): Make several local variables const.
790 (compare_opcodes): Change arguments to const PTR. Add prototype.
791 * sparc-opc.c (arg): Change name field to be const.
792 (lookup_name, lookup_value): Add prototypes. Change table and
793 name parameters to be const.
794 (sparc_encode_asi): Change name parameter to be const.
795 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
796 (sparc_encode_sparclet_cpreg): Likewise.
797 (sparc_decode_asi): Change return type to be const.
798 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
799 (sparc_decode_sparclet_cpreg): Likewise.
801 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
803 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
804 Solaris doesn't like the combined options, and the -f is
806 (stamp-tshlink, install): Likewise.
808 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
810 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
813 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
815 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
817 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
819 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
822 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
824 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
827 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
829 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
831 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
833 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
836 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
838 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
839 floatformat_to_double to make portable.
840 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
843 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
845 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
846 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
848 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
850 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
851 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
854 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
856 * tic80-opc.c (LSI_SCALED): Renamed from this ...
857 (OFF_SL_BR_SCALED): ... to this, and added the flag
858 TIC80_OPERAND_BASEREL to the flags word.
859 (tic80_opcodes): Replace all occurances of LSI_SCALED with
863 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
865 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
866 Change mips_opcodes from const array to a pointer,
867 and change bfd_mips_num_opcodes from const int to int,
868 so that we can increase the size of the mips opcodes table
872 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
874 * tic80-opc.c (tic80_predefined_symbols): Revert change to
875 store BITNUM values in the table in one's complement form
876 to match behavior when assembler is given a raw numeric
877 value for a BITNUM operand.
878 * tic80-dis.c (print_operand_bitnum): Ditto.
882 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
884 * d30v-opc.c: Removed references to FLAG_X.
887 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
889 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
892 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
894 * Makefile.in: Added d30v object files.
895 * configure: (bfd_d30v_arch) Rebuilt.
896 * configure.in: (bfd_d30v_arch) Added new case.
897 * d30v-dis.c: New file.
898 * d30v-opc.c: New file.
899 * disassemble.c (disassembler) Add entry for d30v.
903 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
905 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
906 representations for the floating point BITNUM values.
908 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
910 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
911 in the table in one's complement form, as they appear in the
913 (tic80_symbol_to_value): Use macros to access predefined
915 (tic80_value_to_symbol): Ditto.
916 (tic80_next_predefined_symbol): New function.
917 * tic80-dis.c (print_operand_bitnum): Remove code that did
918 one's complement for BITNUM values.
922 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
924 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
927 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
929 * makefile.vms: Remove 8 bit characters. Update to latest
932 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
934 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
936 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
938 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
939 (IMM24_PCREL): Likewise.
941 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
943 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
944 address for an extended PC relative instruction that is not a
947 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
949 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
953 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
955 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
956 (tic80_opcodes): Sort entries so that long immediate forms
957 come after short immediate forms, making it easier for
958 assembler to select the right one for a given operand.
961 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
963 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
965 (print_insn_mips16): Likewise.
968 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
970 * mips-opc.c: add r5900.
974 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
976 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
977 a symbol class that restricts translation to just that
978 class (general register, condition code, etc).
980 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
982 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
983 and REG_DEST_E for register operands that have to be
984 an even numbered register. Add REG_FPA for operands that
985 are one of the floating point accumulator registers.
986 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
987 (tic80_opcodes): Change entries that need even numbered
988 register operands to use the new operand table entries.
989 Add "or" entries that are identical to "or.tt" entries.
992 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
994 * mips16-opc.c: Add new cases of exit instruction for
996 * mips-dis.c (print_mips16_insn_arg): Display floating point
997 registers in operands of exit instruction. Print `$' before
998 register names in operands of entry and exit instructions.
1000 start-sanitize-tic80
1001 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1003 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1004 pairs for all predefined symbols recognized by the assembler.
1005 Also used by the disassembling routines.
1006 (tic80_symbol_to_value): New function.
1007 (tic80_value_to_symbol): New function.
1008 * tic80-dis.c (print_operand_control_register,
1009 print_operand_condition_code, print_operand_bitnum):
1010 Remove private tables and use tic80_value_to_symbol function.
1013 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1015 * d10v-dis.c (print_operand): Change address printing
1016 to correctly handle PC wrapping. Fixes PR11490.
1018 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1020 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1023 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1025 * mips-dis.c (print_insn_mips16): Set insn_info information.
1026 (print_mips16_insn_arg): Likewise.
1028 * mips-dis.c (print_insn_mips16): Better handling of an extend
1029 opcode followed by an instruction which can not be extended.
1031 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1033 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1034 coldfire moveb instruction to not allow an address register as
1035 destination. Although the documentation does not indicate that
1036 this is invalid, experiments uncovered unexpected behavior.
1037 Added a comment explaining the situation. Thanks to Andreas
1038 Schwab for pointing this out to me.
1040 start-sanitize-tic80
1041 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1043 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1044 entries are presorted so that entries with the same mnemonic are
1045 adjacent to each other in the table. Sort the entries for each
1046 instruction so that this is true.
1049 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1051 * m68k-dis.c: Include <libiberty.h>.
1052 (print_insn_m68k): Sort the opcode table on the most significant
1053 nibble of the opcode.
1055 start-sanitize-tic80
1056 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1058 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1059 "vsub", "vst", "xnor", and "xor" instructions.
1060 (V_a1): Renamed from V_a, msb of accumulator reg number.
1061 (V_a0): Add macro, lsb of accumulator reg number.
1063 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1065 * tic80-dis.c (print_insn_tic80): Broke excessively long
1066 function up into several smaller ones and arranged for
1067 the instruction printing function to be callable recursively
1068 to print vector instructions that have both a load and a
1069 math instruction packed into a single opcode.
1070 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1071 to explain why it comes after the other vector opcodes.
1074 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1076 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1077 move insns to handle immediate operands.
1079 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1081 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1082 fix operand mask in the "moveml" entries for the coldfire.
1084 start-sanitize-tic80
1085 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1087 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1088 New macros for building vector instruction opcodes.
1089 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1090 FMT_LI, which were unused. The field is now a flags field.
1091 Remove some opcodes that are possible, but illegal, such
1092 as long immediate instructions with doubles for immediate
1093 values. Add "vadd" and "vld" instructions.
1095 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1097 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1098 the order more logical. Move the shift alias instructions ("rotl",
1099 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1100 interspersed with the regular sr.x and sl.x instructions. Add
1101 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1102 "sub", "subu", "swcr", and "trap".
1104 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1106 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1107 (OFF_SL_PC): Renamed from OFF_SL.
1108 (OFF_SS_BR): New operand type for base relative operand.
1109 (OFF_SL_BR): New operand type for base relative operand.
1110 (REG_BASE): New operand type for base register operand.
1111 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1112 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1113 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1115 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1116 10 char field, padded with spaces on rhs, rather than a string
1117 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1118 than old TIC80_OPERAND_RELATIVE. Add support for new
1119 TIC80_OPERAND_BASEREL flag bit.
1121 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1123 * tic80-dis.c (print_insn_tic80): Print floating point operands
1125 * tic80-opc.c (SPFI): Add single precision floating point
1126 immediate operand type.
1127 (ROTATE): Add rotate operand type for shifts.
1128 (ENDMASK): Add for shifts.
1129 (n): Macro for the 'n' bit.
1130 (i): Macro for the 'i' bit.
1131 (PD): Macro for the 'PD' field.
1132 (P2): Macro for the 'P2' field.
1133 (P1): Macro for the 'P1' field.
1134 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1138 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1140 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1141 adding in current address for pc-relative operands.
1143 start-sanitize-tic80
1144 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1146 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1147 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1148 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1149 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1150 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1151 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1152 (REG_SCALED, LSI_SCALED): New operand types.
1153 (E): New macro for 'E' bit at bit 27.
1154 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1155 opcodes, including the various size flavors (b,h,w,d) for
1156 the direct load and store instructions.
1158 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1160 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1162 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1163 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1164 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1165 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1166 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1167 masks with "MASK_* & ~M_*" to get the M bit reset.
1168 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1170 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1172 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1173 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1174 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1176 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1177 CC, SICR, and LICR table entries.
1178 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1179 "bcnd", and "brcr" opcodes.
1182 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1184 * ppc-opc.c (powerpc_operands): Make comment match the
1185 actual fields (no shift field).
1186 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1187 start-sanitize-tic80
1188 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1189 partial implementation, work in progress.
1190 * tic80-opc.c (tic80_operands): Begin construction operands table.
1191 (tic80_opcodes): Continue populating opcodes table and start
1192 filling in the operand indices.
1193 (tic80_num_opcodes): Add this.
1196 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1198 * m68k-opc.c: Add #B case for moveq.
1200 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1202 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1203 before they are used.
1205 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1207 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1208 for "breakpoint" instruction.
1210 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1212 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1213 (dep): Use ALL_CFLAGS rather than CFLAGS.
1215 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1217 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1220 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1222 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1223 start-sanitize-tic80
1224 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1227 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1229 * mips16-opc.c: Add "abs".
1231 start-sanitize-tic80
1232 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1234 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1235 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1236 (disassembler): Add bfd_arch_tic80 support to set disassemble
1237 to print_insn_tic80.
1238 * tic80-dis.c (print_insn_tic80): Add stub.
1240 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1242 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1243 * configure: Regenerate with autoconf.
1244 * tic80-dis.c: Add file.
1245 * tic80-opc.c: Add file.
1248 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1250 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1252 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1254 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1255 (mn10200_opcodes): Use it for some logicals and btst insns.
1256 Add "break" and "trap" instructions.
1258 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1260 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1262 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1264 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1265 relative load or add now depends upon whether the instruction is
1268 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1270 * mn10200-dis.c: Finish writing disassembler.
1271 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1272 Fix mask for "jmp (an)".
1274 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1275 handle endianness issues for mn10300.
1277 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1279 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1281 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1282 instruction. Fix opcode field for "movb (imm24),dn".
1284 * mn10200-opc.c (mn10200_operands): Fix insertion position
1287 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1289 * mn10200-opc.c: Create mn10200 opcode table.
1290 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1291 but moving along nicely.
1293 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1295 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1297 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1299 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1300 specifiers for fmovem* instructions.
1302 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1304 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1306 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1308 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1311 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1313 * mn10300-opc.c: Add some comments explaining the various
1316 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1318 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1320 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1323 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1324 operand specifiers in fmovm* instructions.
1326 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1328 * ppc-opc.c (insert_li): Give an error if the offset has the two
1329 least significant bits set.
1331 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1333 * mips-dis.c (print_insn_mips16): Separate the instruction from
1334 the arguments with a tab, not a space.
1336 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1338 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1341 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1344 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1346 * configure: Rebuild with autoconf 2.12.
1348 Add support for mips16 (16 bit MIPS implementation):
1349 * mips16-opc.c: New file.
1350 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1351 (mips16_reg_names): New static array.
1352 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1353 after seeing a 16 bit symbol.
1354 (print_insn_little_mips): Likewise.
1355 (print_insn_mips16): New static function.
1356 (print_mips16_insn_arg): New static function.
1357 * mips-opc.c: Add jalx instruction.
1358 * Makefile.in (mips16-opc.o): New target.
1359 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1360 * configure: Rebuild.
1362 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1364 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1365 operand specifiers in *save, *restore and movem* instructions.
1367 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1370 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1371 register operands for immediate arithmetic, not, neg, negx, and
1372 set according to condition instructions.
1374 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1375 specifier of the effective-address operand in immediate forms of
1376 arithmetic instructions. The specifier for the immediate operand
1377 notes how and where the constant will be stored.
1379 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1381 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1384 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1387 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1389 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1391 * mn10300-dis.c (disassemble): Handle register lists.
1393 * mn10300-opc.c: Fix handling of register list operand for
1394 "call", "ret", and "rets" instructions.
1396 * mn10300-dis.c (disassemble): Print PC-relative and memory
1397 addresses symbolically if possible.
1398 * mn10300-opc.c: Distinguish between absolute memory addresses,
1399 pc-relative offsets & random immediates.
1401 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1403 (disassemble): Handle SPLIT and EXTENDED operands.
1405 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1407 * mn10300-dis.c: Rough cut at printing some operands.
1409 * mn10300-dis.c: Start working on disassembler support.
1410 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1412 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1414 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1416 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1418 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1420 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1422 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1423 register argument is calls and jmp instructions.
1425 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1427 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1428 getx operand. Fix opcode for mulqu imm,dn.
1430 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1432 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1433 in MN10300_OPERAND_SPLIT operands for how many bits
1434 appear in the basic insn word. Add IMM32_HIGH24,
1435 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1436 (mn10300_opcodes): Use new operands as needed.
1438 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1439 for bset, bclr, btst instructions.
1440 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1442 * mn10300-opc.c (mn10300_operands): Remove many redundant
1443 operands. Update opcode table as appropriate.
1444 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1445 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1447 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1449 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1450 operands (for indexed load/stores). Fix bitpos for DI
1451 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1452 few instructions that insert immediates/displacements in the
1453 middle of the instruction. Add IMM8E for 8 bit immediate in
1454 the extended part of an instruction.
1455 (mn10300_operands): Use new opcodes as appropriate.
1457 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1459 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1460 sequential so the assembler never parallelizes it with
1463 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1465 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1466 a data/address register that appears in register field 0
1467 and register field 1.
1468 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1470 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1472 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1473 standard disassembly.
1475 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1476 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1477 Recategorize PALcode instructions.
1479 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1481 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1483 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1485 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1486 there are no operand types.
1488 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1490 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1492 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1494 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1496 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1498 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1500 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1501 and sst.w instructions.
1503 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1506 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1508 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1511 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1513 * ppc-opc.c (PPCPWR2): Define.
1514 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1517 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1519 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1520 field for movhu instruction.
1522 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1523 cast value to "long" not "signed long" to keep hpux10
1526 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1528 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1531 * mn10300-opc.c (FMT*): Remove definitions.
1533 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1534 for shift-by-register opcodes.
1536 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1537 into [AD][MN][01] for encoding the position of the register
1540 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1542 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1543 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1545 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1547 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1548 Fix various typos. Add "PAREN" operand.
1549 (MEM, MEM2): Define.
1550 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1551 operands. Fix several typos.
1553 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1556 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1558 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1559 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1561 (mn10300_opcodes): Break opcode format out into its own field.
1562 Update many operand fields to deal with signed vs unsigned
1563 issues. Fix one or two typos in the "mov" instruction
1564 opcode, mask and/or operand fields.
1566 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1568 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1569 m68851 wasn't reset.
1571 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1573 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1574 all opcodes. Very rough cut at operands for all opcodes.
1576 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1579 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1581 * mn10200-opc.c, mn10300-opc.c: New files.
1582 * mn10200-dis.c, mn10300-dis.c: New files.
1583 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1584 * disassemble.c: Break mn10x00 support into 10200 and 10300
1586 * configure.in: Likewise.
1587 * configure: Rebuilt.
1589 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1591 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1593 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1595 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1597 * disassemble (ARCH_mn10x00): Define.
1598 (disassembler): Handle bfd_arch_mn10x00.
1599 * configure.in: Recognize bfd_mn10x00_arch.
1600 * configure: Rebuilt.
1602 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1604 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1605 accordingly. Don't declare functions using op_rtn.
1607 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1609 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1610 params to be more standard.
1611 * (disassemble): Print absolute addresses and symbolic names for
1612 branch and jump targets.
1613 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1615 * (v850_opcodes): Add breakpoint insn.
1617 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1619 * m68k-opc.c: Move the fmovemx data register cases before the
1620 other cases, so that they get recognized before the data register
1621 does gets treated as a degenerate register list.
1623 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1625 * mips-opc.c: Add a case for "div" and "divu" with two registers
1626 and a destination of $0.
1628 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1630 * mips-dis.c (print_insn_arg): Add prototype.
1631 (_print_insn_mips): Ditto.
1633 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1635 * mips-dis.c (print_insn_arg): Print condition code registers as
1638 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1640 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1642 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1644 * v850-dis.c (disassemble): Make static. Provide prototype.
1646 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1648 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1651 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1653 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1654 ']' characters into the output stream.
1655 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1656 Add "memop" field to all opcodes (for the disassembler).
1657 Reorder opcodes so that "nop" comes before "mov" and "jr"
1658 comes before "jarl".
1660 * v850-dis.c (print_insn_v850): Fix typo in last change.
1662 * v850-dis.c (print_insn_v850): Properly handle disassembling
1663 a two byte insn at the end of a memory region when the memory
1664 region's size is only two byte aligned.
1666 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1668 * v850-dis.c (v850_reg_names): Define.
1669 (v850_sreg_names, v850_cc_names): Likewise.
1670 (disassemble): Very rough cut at printing operands (unformatted).
1672 * v850-opc.c (BOP_MASK): Fix.
1673 (v850_opcodes): Fix mask for jarl and jr.
1675 * v850-dis.c: New file. Skeleton for disassembler support.
1676 * Makefile.in Remove v850 references, they're not needed here.
1677 * configure.in: Add v850-dis.o when building v850 toolchains.
1678 * configure: Rebuilt.
1679 * disassemble.c (disassembler): Call v850 disassembler.
1681 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1682 (insert_d8_6, extract_d8_6): New functions.
1683 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1684 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1686 (IF4A, IF4B): Use "D7" instead of "D7S".
1687 (IF4C, IF4D): Use "D8_7" instead of "D8".
1688 (IF4E, IF4F): New. Use "D8_6".
1689 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1690 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1692 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1693 (v850_operands): Change D16 to D16_15, use special insert/extract
1694 routines. New new D16 that uses the generic insert/extract code.
1695 (IF7A, IF7B): Use D16_15.
1696 (IF7C, IF7D): New. Use D16.
1697 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1699 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1700 message. Issue an error if the branch offset is odd.
1702 * v850-opc.c: Add notes about needing special insert/extract
1703 for all the load/store insns, except "ld.b" and "st.b".
1705 * v850-opc.c (insert_d22, extract_d22): New functions.
1706 (v850_operands): Use insert_d22 and extract_d22 for
1708 (insert_d9): Fix range check.
1710 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1712 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1713 and set bits field to D9 and D22 operands.
1715 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1717 * v850-opc.c (v850_operands): Define SR2 operand.
1718 (v850_opcodes): "ldsr" uses R1,SR2.
1720 * v850-opc.c (v850_opcodes): Fix opcode specs for
1721 sld.w, sst.b, sst.h, sst.w, and nop.
1723 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1725 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1726 end of the opcode table.
1728 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1730 * d10v-opc.c (pre_defined_registers): Added register pairs,
1731 "r0-r1", "r2-r3", etc.
1733 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1735 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1736 Create I16U for an unsigned 16bit mmediate operand.
1737 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1739 * v850-opc.c (v850_operands): Define EP operand.
1740 (IF4A, IF4B, IF4C, IF4D): Use EP.
1742 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1743 with immediate operand, "movhi". Tweak "ldsr".
1745 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1746 correct. Get sld.[bhw] and sst.[bhw] closer.
1748 * v850-opc.c (v850_operands): "not" is a two byte insn
1750 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1752 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1754 * v850-opc.c (two): Get order of words correct.
1756 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1758 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1759 register source and destination operands.
1760 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1762 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1763 same thinko in "trap" opcode.
1765 * v850-opc.c (v850_opcodes): Add initializer for size field
1768 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1769 Add D8 for 8-bit unsigned field in short load/store insns.
1770 (IF4A, IF4D): These both need two registers.
1771 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1772 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1773 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1774 for "ldsr" and "stsr".
1775 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1778 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1779 short store word (sst.w).
1781 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1783 * v850-opc.c (v850_operands): Added insert and extract fields,
1784 pointers to functions that handle unusual operand encodings.
1786 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1788 * v850-opc.c (v850_opcodes): Enable "trap".
1790 * v850-opc.c (v850_opcodes): Fix order of displacement
1791 and register for "set1", "clr1", "not1", and "tst1".
1793 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1795 * v850-opc.c (v850_operands): Add "B3" support.
1796 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1799 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1801 * v850-opc.c: Close unterminated comment.
1803 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1805 * v850-opc.c (v850_operands): Add flags field.
1806 (v850_opcodes): add move opcodes.
1808 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1810 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1811 * configure: (bfd_v850v_arch) Add new case.
1812 * configure.in: (bfd_v850_arch) Add new case.
1813 * v850-opc.c: New file.
1815 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1817 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1819 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1821 * d10v-opc.c: Add additional information to the opcode
1822 table to help determinine which instructions can be done
1825 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1827 * mpw-make.sed: Update editing of include pathnames to be
1830 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1832 * arm-opc.h: Added "bx" instruction definition.
1834 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1836 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1838 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1840 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1842 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1844 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1846 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1848 * makefile.vms: Update for alpha-opc changes.
1850 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1852 * i386-dis.c (print_insn_i386): Actually return the correct value.
1853 (ONE, OP_ONE): #ifdef out; not used.
1855 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1857 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1858 Changed subi operand type to treat 0 as 16.
1860 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1862 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1865 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1867 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1868 memory transfer instructions. Add new format string entries %h and %s.
1869 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1872 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1874 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1875 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1877 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1879 * alpha-dis.c (print_insn_alpha_osf): Remove.
1880 (print_insn_alpha_vms): Remove.
1881 (print_insn_alpha): Make globally visible. Chose the register
1882 names based on info->flavour.
1883 * disassemble.c: Always return print_insn_alpha for the alpha.
1885 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1887 * d10v-dis.c (dis_long): Handle unknown opcodes.
1889 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1891 * d10v-opc.c: Changes to support signed and unsigned numbers.
1892 All instructions with the same name that have long and short forms
1893 now end in ".l" or ".s". Divs added.
1894 * d10v-dis.c: Changes to support signed and unsigned numbers.
1896 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1898 * d10v-dis.c: Change all functions to use info->print_address_func.
1900 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1902 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1903 move ccr/sr insns more strict so that the disassembler only
1904 selects them when the addressing mode is data register.
1906 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1907 * d10v-opc.c (pre_defined_registers): Declare.
1908 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1909 to pick a better name for the registers.
1911 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1913 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1914 operands for fexpand and fpmerge. From Christian Kuehnke
1915 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1917 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1919 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1920 print routine. Take new regnames and cpumask arguments.
1921 Kill the environment variable nonsense.
1922 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1923 (print_insn_alpha_vms): New function. Do VMS style regnames.
1924 * disassemble.c (disassembler): Test bfd flavour to pick
1925 between OSF and VMS routines. Default to OSF.
1927 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1929 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1930 * configure: Rebuild.
1931 * Makefile.in (install): Use @INSTALL_SHLIB@.
1933 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1935 * configure: (bfd_d10v_arch) Add new case.
1936 * configure.in: (bfd_d10v_arch) Add new case.
1937 * d10v-dis.c: New file.
1938 * d10v-opc.c: New file.
1939 * disassemble.c (disassembler) Add entry for d10v.
1941 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1943 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1944 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1946 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1948 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1949 distinguish between variants of the instruction set.
1950 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1951 distinguish between variants of the instruction set.
1953 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1955 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1956 the 8086 instruction set.
1957 * i386-dis.c: General cleanups. Make most things static. Add
1958 prototypes. Get rid of static variables aflags and dflags. Pass
1959 them as args (to almost everything).
1961 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1963 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1965 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1967 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1968 if the next arg is marked with SRC_IN_DST. Gross.
1970 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1971 we're looking for and find EXR.
1973 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1974 if we're looking for KBIT and we don't find it.
1976 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1979 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1980 3bit immediate operands.
1982 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1984 * Released binutils 2.7.
1986 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1987 <kkaempf@progis.ac-net.de>.
1989 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1991 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1993 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1995 * sparc-dis.c (print_insn_sparclite): New routine to print
1996 sparclite instructions.
1998 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2000 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2002 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2004 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2005 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2006 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2008 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2010 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2011 Use autoconf-set values.
2012 (docdir, oldincludedir): Removed.
2013 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2015 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2017 * alpha-opc.c: New file.
2018 * alpha-opc.h: Remove.
2019 * alpha-dis.c: Complete rewrite to use new opcode table.
2020 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2021 * configure: Rebuild with autoconf 2.10.
2022 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2023 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2025 (alpha-opc.o): New target.
2027 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2029 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2030 Set imm_added_to_rs1 even if the source and destination register
2033 * sparc-opc.c: Add some two operand forms of the wr instruction.
2035 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2037 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2040 * disassemble.c (disassembler): Handle H8/S.
2041 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2043 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2045 * sparc-opc.c: Add beq/teq as aliases for be/te.
2047 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2048 <sergei@msil.sps.mot.com>.
2050 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2052 * makefile.vms: New file.
2054 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2056 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2058 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2061 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2063 * i386-dis.c (OP_OFF): Call append_prefix.
2065 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2067 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2068 unsigned long to silence a warning from the Solaris PowerPC
2071 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2073 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2075 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2077 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2079 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2080 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2081 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2082 cpush, cpusha, cpull sparclet insns.
2084 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2086 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2088 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2090 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2091 Set F_FLOAT on other floating point instructions.
2093 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2095 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2097 (powerpc_opcodes): Add 860/821 specific SPRs.
2099 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2101 * configure.in: Permit --enable-shared to specify a list of
2102 directories. Set and substitute BFD_PICLIST.
2103 * configure: Rebuild.
2104 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2105 uses. Set to @BFD_PICLIST@.
2107 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2109 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2110 not "abs", which may be needed for the absolute in something
2111 like btst #0,@10:8. Print L_3 immediates separately from other
2112 immediates. Change ABSMOV reference to ABS8MEM.
2114 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2116 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2117 (current_arch_mask): New static global.
2118 (compute_arch_mask): New static function.
2119 (print_insn_sparc): Delete sparc_v9_p. New static local
2120 current_mach. Resort opcode table if current_mach changes.
2121 Generalize "insn not supported" test.
2122 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2123 Delete test for v9/!v9.
2124 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2126 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2127 (brfcx): Renamed to FBRX.
2128 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2129 coprocessor mnemonics are not supported on the sparclet).
2130 (condf): Renamed to CONDF.
2131 (SLCBCC2): Delete F_ALIAS flag.
2133 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2135 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2136 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2138 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2140 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2141 that the shared library version number is set correctly.
2143 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2145 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2146 Miles Bader <miles@gnu.ai.mit.edu>.
2147 * configure: Rebuild.
2149 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2151 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2154 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2156 * configure: Rebuild with autoconf 2.8.
2158 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2160 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2161 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2163 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2165 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2166 since they appear as targets in Makefile.in.
2167 * configure: Rebuild.
2169 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2171 * mpw-make.sed: Edit out shared library support bits.
2173 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2175 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2176 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2177 (sparc_opcodes): Add sparclet insns.
2178 (sparclet_cpreg_table): New static local.
2179 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2180 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2182 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2184 * i386-dis.c (index16): New static variable.
2185 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2187 (OP_indirE): Return result of OP_E.
2188 (OP_E): Check for 16 bit addressing mode, and disassemble
2189 correctly. Optimised 32 bit case a little. Don't print
2190 "(base,index,scale)" when sib specifies only an offset.
2192 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2194 * configure.in: Set and substitute SHLIB_DEP.
2195 * configure: Rebuild.
2196 * Makefile.in (SHLIB_DEP): New variable.
2197 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2198 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2199 COMMON_SHLIB, add them to piclist with appropriate modifications.
2200 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2201 here: just use piclist.
2203 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2205 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2206 (print_insn_sparc): Rewrite v9/not-v9 tests.
2207 (compare_opcodes): Likewise.
2208 * sparc-opc.c (MASK_<ARCH>): Define.
2209 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2210 (sparclet,v6notv9): Define.
2211 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2212 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2214 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2216 * configure.in: Call AC_PROG_CC before configure.host.
2217 * configure: Rebuild.
2219 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2221 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2223 * i386-dis.c (onebyte_has_modrm): New static array.
2224 (twobyte_has_modrm): New static array.
2225 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2227 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2229 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2232 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2234 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2237 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2239 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2240 m68010up, not just m68020up | cpu32.
2242 * Makefile.in (SONAME): New variable.
2243 ($(SHLINK)): Make a link to the transformed name, as well.
2244 (stamp-tshlink): New target.
2245 (install): Skip stamp-tshlink during install.
2247 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2249 * configure.in: Call AC_ARG_PROGRAM.
2250 * configure: Rebuild.
2251 * Makefile.in (program_transform_name): New variable.
2252 (install): Transform library name before installing it.
2254 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2256 * i960-dis.c (mem): Add HX dcinva instruction.
2258 Support for building as a shared library, based on patches from
2259 Alan Modra <alan@spri.levels.unisa.edu.au>:
2260 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2261 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2262 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2263 * configure: Rebuild.
2264 * Makefile.in (ALLLIBS): New variable.
2265 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2266 (COMMON_SHLIB, SHLINK): New variables.
2267 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2268 (STAGESTUFF): Remove variable.
2269 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2270 (stamp-piclist, piclist): New targets.
2271 ($(SHLIB), $(SHLINK)): New targets.
2272 ($(OFILES)): Depend upon stamp-picdir.
2273 (disassemble.o): Build twice if PICFLAG is set.
2274 (MOSTLYCLEAN): Add pic/*.o.
2275 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2276 (distclean): Remove pic and stamp-picdir.
2277 (install): Install shared libraries.
2278 (stamp-picdir): New target.
2280 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2282 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2283 Print unknown instruction as "unknown", rather than in hex.
2285 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2287 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2289 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2291 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2293 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2295 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2296 when necessary. From Ulrich Drepper
2297 <drepper@myware.rz.uni-karlsruhe.de>.
2299 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2301 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2302 sparc_num_opcodes. Update architecture enum values.
2303 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2304 (sparc_opcode_lookup_arch): New function.
2305 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2306 (sparc_opcodes): Add v9a shutdown insn.
2308 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2310 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2311 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2313 (print_insn_sparc64): Deleted.
2314 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2317 * sparc-opc.c (architecture_pname): Add v9a.
2319 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2321 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2322 incorrectly defined as 0x16 when it should be 0x15.
2323 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2324 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2325 excb (exception barrier) which is defined in the Alpha
2326 Architecture Handbook version 2.
2327 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2328 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2329 disassembled as or, for example.
2331 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2333 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2334 (_print_insn_mips): Change i from int to unsigned int.
2336 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2338 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2339 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2341 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2343 * i386-dis.c: Added Pentium Pro instructions.
2345 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2347 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2350 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2352 * sh-opc.h (sh_nibble_type): Added REG_B.
2353 (sh_arg_type): Added A_REG_B.
2354 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2356 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2358 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2360 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2362 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2364 * Makefile.in (distclean): Remove stamp-h. From Ronald
2365 F. Guilmette <rfg@monkeys.com>.
2367 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2369 From David Mosberger-Tang <davidm@azstarnet.com>:
2370 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2373 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2375 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2376 (sh_table): Added many SH3 opcodes.
2377 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2379 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2381 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2382 (subco,subco.): Mark this PPC, not PPCCOM.
2384 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2386 * configure: Rebuild with autoconf 2.7.
2388 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2390 * configure: Rebuild with autoconf 2.6.
2392 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2394 * configure.in: Sort list of architectures. Accept but do nothing
2395 for alliant, convex, pyramid, romp, and tahoe.
2397 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2399 * a29k-dis.c (print_special): Change num to unsigned int.
2401 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2403 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2406 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2408 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2409 * configure: Rebuilt.
2411 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2413 * configure.in: Add case for bfd_i860_arch.
2414 * configure: Rebuild.
2416 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2418 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2419 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2420 (NEXTDOUBLE): Likewise.
2421 (print_insn_m68k): Don't match fmoveml if there is more than one
2422 register in the list.
2423 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2425 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2427 * m68k-opc.c: Use #W rather than #w.
2428 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2430 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2432 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2433 and likewise for all the dbxx opcodes.
2435 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2437 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2439 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2441 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2442 the VR4100 specific instructions to the mips_opcodes structure.
2444 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2446 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2447 ugly Metrowerks bug in CW6, is fixed in CW7.
2449 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2451 * ppc-opc.c (whole file): Add flags for common/any support.
2453 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2455 * Makefile.in (BISON): Remove macro.
2456 (FLAGS_TO_PASS): Remove BISON.
2458 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2460 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2462 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2463 instructions that take no args by looking at the match mask.
2464 (print_insn_arg): Always print "%" before register names.
2465 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2466 [case '_']: Don't print "@#" before address.
2467 [case 'J']: Use "%s" as format string, not register name.
2468 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2470 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2472 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2475 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2477 From David Mosberger-Tang <davidm@azstarnet.com>
2479 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2480 (alpha_insn_set): added definitions for VAX floating point
2481 instructions (Unix compilers don't generate these, but handcoded
2482 assembly might still use them).
2484 * alpha-dis.c (print_insn_alpha): added support for disassembling
2485 the miscellaneous instructions in the Alpha instruction set.
2487 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2489 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2490 no longer create sysdep.h, sed ppc-opc.c to work around a
2491 serious Metrowerks C bug.
2492 * mpw-make.in: Remove.
2493 * mpw-make.sed: New file, used by mpw-configure to edit
2494 Makefile.in into an MPW makefile.
2496 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2498 * Makefile.in (maintainer-clean): New synonym for realclean.
2500 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2502 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2503 which use '0', '1', and '2' instead. Specify the proper size for
2504 a pmove immediate operand. Correct the pmovefd patterns to be
2505 moves to a register, not from a register.
2506 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2508 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2510 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2511 %psr, %wim, %tbr as F_NOTV9.
2513 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2515 * Makefile.in (Makefile): Just rebuild Makefile when running
2517 (config.h, stamp-h): New targets.
2518 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2519 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2520 rebuilding config.h.
2521 * configure: Rebuild.
2523 * mips-opc.c: Change unaligned loads and stores with "t,A"
2524 operands to use "t,A(b)".
2526 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2528 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2530 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2532 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2533 until 3 instead of until 2.
2535 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2537 * Makefile.in (ALL_CFLAGS): Define.
2538 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2539 (MOSTLYCLEAN): Add config.log.
2540 (distclean): Don't remove config.log.
2541 * configure.in: Substitute HDEFINES.
2542 * configure: Rebuild.
2544 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2546 * sh-opc.h (sh_arg_type): Add F_FR0.
2547 (sh_table, case fmac): Add F_FR0 as first argument.
2549 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2551 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2553 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2555 * sparc-dis.c: Remove all references to NO_V9.
2557 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2559 * aclocal.m4: Just include ../bfd/aclocal.m4.
2560 * configure: Rebuild.
2562 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2564 * sparc-dis.c (X_DISP19): Define.
2565 (print_insn, case 'G'): Use it.
2566 (print_insn, case 'L'): Sign extend displacement.
2568 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2570 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2571 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2572 host_makefile_frag or frags.
2573 * aclocal.m4: New file.
2574 * configure: Rebuild.
2575 * Makefile.in (INSTALL): Set to @INSTALL@.
2576 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2577 (INSTALL_DATA): Set to @INSTALL_DATA@.
2579 (AR_FLAGS): Set to rc rather than qc.
2580 (CC): Define as @CC@.
2581 (CFLAGS): Set to @CFLAGS@.
2582 (@host_makefile_frag@): Remove.
2583 (config.status): Remove dependency upon @frags@.
2585 * configure.in: ../bfd/config.bfd now just sets shell variables.
2586 Use them rather than looking through target Makefile fragments.
2587 * configure: Rebuild.
2589 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2591 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2593 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2595 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2596 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2599 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2600 (lookup_{name,value}): New functions.
2601 (prefetch_table): New static local.
2602 (sparc_{encode,decode}_prefetch): New functions.
2603 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2605 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2607 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2610 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2612 * sh-dis.c: Correct comment on first line of file.
2614 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2616 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2618 * sparc-opc.c (asi, membar): New static locals.
2619 (sparc_{encode,decode}_{asi,membar}): New functions.
2620 (sparc_opcodes, membar insn): Fix.
2621 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2622 Support decoding of membar masks.
2625 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2627 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2629 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2631 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2632 and likewise for the other branches. Add bhs as an alias for bcc,
2633 and likewise for the size variants. Add dbhs as an alias for
2636 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2638 * sh-opc.h (FP sts instructions): Update to match reality.
2640 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2642 * m68k-dis.c: (fpcr_names): Add % before all register names.
2643 (reg_names): Likewise.
2644 (print_insn_arg): Don't explicitly print % before register names.
2645 Add % before register names in static array names. In case 'r',
2646 print data registers as `@(Dn)', not `Dn@'. When printing a
2647 memory address, don't print @# before it.
2648 (print_indexed): Change base_disp and outer_disp from int to
2649 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2650 syntax. Sign extend 8 byte displacement correctly.
2651 (print_base): Print using MIT syntax. Print zpc when appropriate.
2652 Change parameter disp from int to bfd_vma.
2654 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2657 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2659 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2660 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2661 * sh-opc.h (sh_arg_type): Add new operand types.
2662 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2664 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2666 * Makefile.in (distclean): Remove generated file config.h.
2668 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2670 * Makefile.in (distclean): Remove generated file config.h.
2672 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2674 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2676 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2678 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2679 rather than numopcodes. Use m68k_opcodes rather than removed
2680 opcode function. Don't check F_ALIAS.
2681 (print_insn_arg): Change first parameter to be const char *.
2682 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2683 (m68k-opc.o): New target.
2684 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2685 * configure: Rebuild.
2687 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2689 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2690 (opcode_bits, opcode_hash_table): New variables.
2691 (opcodes_initialized): Renamed from opcodes_sorted.
2692 (build_hash_table): New function.
2693 (is_delayed_branch): Use hash table.
2694 (print_insn): Renamed from print_insn_sparc, made static.
2695 Build and use hash table. If !sparc64, ignore sparc64 insns,
2696 and vice-versa if sparc64.
2697 (print_insn_sparc, print_insn_sparc64): New functions.
2698 (compare_opcodes): Move sparc64 opcodes to end.
2699 Print commutative insns with constant second.
2700 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2702 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2704 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2705 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2706 avoids printing a delay slot in a delay slot.
2707 * sh-opc.h (sh_table): Fully bracket last entry.
2709 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2711 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2713 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2715 * configure.in: Get host_makefile_frag from ${srcdir}.
2717 * configure.in: Autoconfiscated. Check for string[s].h. Create
2718 config.h from config.in. Don't set up sysdep.h link.
2719 * sysdep.h: New file.
2720 * configure, config.in: New files, generated from configure.in.
2721 * Makefile.in: Updated to be processed autoconf-style.
2722 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2723 (Makefile): Depend on config.status.
2724 (config.status): New rule.
2725 * configure.bat: Update Makefile substitutions.
2727 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2729 * mips-opc.c (L1): Define.
2730 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2731 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2734 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2736 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2737 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2738 have multiple add units but only a single logical unit.
2740 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2741 shifted by 18, without any insertion or extraction function.
2742 (insert_cr, extract_cr): Remove.
2744 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2746 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2749 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2751 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2752 * sh-opc.h: Add copyright.
2754 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2756 * Makefile.in (crunch-m68k): Delete extra target accidentally
2757 checked in a while ago.
2759 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2761 * sh-opc.h (sh_table): Add SH3 support.
2763 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2765 * sh-opc.h: Added bsrf and braf.
2767 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2769 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2770 bogus [ls]fm{ea,fd} patterns.
2772 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2773 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2774 initialize it from memory. Make function static.
2775 (print_insn_{big,little}_arm): New functions.
2776 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2777 the correct endianness.
2779 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2781 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2784 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2786 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2787 17th, so that it builds again using GCC as the compiler.
2789 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2791 * mips-dis.c (print_insn_little_mips): Cast return value from
2792 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2793 expects an unsigned long, and that might be fewer words of
2794 argument storage (e.g., if bfd_vma is long long on a 32-bit
2796 (print_insn_big_mips): Likewise with bfd_getb32 value.
2797 (_print_insn_mips): Now static.
2799 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2801 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2802 gcc memory hog problem with initializer is fixed.
2804 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2806 Merge in support for Mac MPW as a host.
2807 (Old change descriptions retained for informational value.)
2809 * mpw-config.in (archname): Compute from the config.
2810 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2812 * mpw-config.in (target_arch): Compute from canonical target.
2813 (m68k, mips, powerpc, sparc): Add architectures.
2814 * mpw-make.in (disassemble.c.o): Add.
2815 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2817 * mpw-config.in (BFD_MACHINES): Set to a default value.
2818 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2820 * mpw-make.in (CSEARCH): Add extra-include to search path.
2822 * mpw-config.in (varargs.h): Don't create.
2823 (sysdep.h): Create using forward-include.
2824 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2826 * mpw-config.in: New file, MPW version of configure.in.
2827 * mpw-make.in: New file, MPW version of Makefile.in.
2829 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2831 * alpha-dis.c (print_insn_alpha): Put empty statement after
2834 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2836 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2837 (low_sign_extend): Likewise.
2838 (get_field): Delete unused function.
2839 (set_field, deposit_14, deposit_21): Likewise.
2841 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2843 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2846 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2848 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2850 * alpha-opc.h (OSF_ASMCODE): define
2851 print pal-code names as defined in App C of the
2852 Alpha Architecture Reference Manual
2854 * alpha-dis.c: cleaned up output
2855 print stylized code forms as defined in App A.4.3 of the
2856 Alpha Architecture Reference Manual
2858 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2860 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2862 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2865 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2867 * m68k-dis.c (opcode): New function. Returns address of opcode
2868 table entry given index, even if the opcode table was split to
2869 work around gcc bugs.
2870 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2872 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2873 (reg_names): Now const.
2874 (print_insn_arg): Arrays cacheFieldName and names now const.
2875 (print_indexed): Array scales now const.
2877 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2879 * ppc-opc.c: Sort recently added instructions by minor opcode
2880 number within major opcode number.
2882 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2884 * hppa-dis.c: Include libhppa.h.
2886 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2888 * mips-opc.c: Change dli to use M_DLI, and add dla.
2890 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2892 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2894 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2896 * mips-opc.c: Add r4650 mul instruction.
2898 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2900 * mips-opc.c: Add uld and usd macros for unaligned double load and
2903 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2905 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2906 mfdcr, mtdcr, icbt, iccci.
2908 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2910 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2911 signed char fields to shorts, more portable.
2913 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2915 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2916 char fields as signed chars, since they may have negative values.
2918 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2920 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2921 (mycroft@netbsd.org).
2923 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2925 From "Logg, Ed" <elogg@ea.com>:
2926 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2927 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2930 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2932 * ppc-opc.c: Changes based on patch from David Edelsohn
2933 <edelsohn@mhpcc.edu>.
2934 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2937 (insert_tbr): New static function.
2938 (extract_tbr): New static function.
2939 (XFXFXM_MASK, XFXM): Define.
2940 (XSPRBAT_MASK, XSPRG_MASK): Define.
2941 (powerpc_opcodes): Add instructions to access special registers by
2942 name. Add mtcr and mftbu.
2944 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2946 * mips-opc.c (P3): Define.
2947 (mips_opcodes): Add mad and madu.
2949 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2951 * configure.in: Add W65 support.
2952 * disassemble.c: Likewise.
2953 * w65-opc.h, w65-dis.c: New files.
2955 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2957 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2960 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2962 * mips-opc.c: Add dli as a synonym for li.
2964 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2966 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2967 print something for reserved opcode values, even if it won't
2970 * mips-dis.c (_print_insn_mips): When initializing, shift right
2971 and mask, to avoid sign extension problems on the Alpha.
2973 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2976 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2978 * sh-opc.h (mov.l gbr): Get direction right.
2979 * sh-dis.c (print_insn_shx): New function.
2980 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2981 print opcodes with right byte order.
2983 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2985 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2986 to avoid conflicts with getopt.
2988 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2990 * hppa-dis.c (print_insn_hppa): Read the instruction using
2991 bfd_getb32, so that it works on a little endian or 64 bit host.
2992 Remove unused local variable op.
2994 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2996 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2997 addu does not work correctly if -mips3.
2999 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3001 * a29k-dis.c (print_special): Add special register names defined
3002 on 29030, 29040 and 29050.
3003 (print_insn): Handle new operand type 'I'.
3005 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3007 * Makefile.in (INSTALL): Use top level install.sh script.
3009 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3011 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3012 that it works on a little endian host.
3014 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3016 * configure.in: Use ${config_shell} when running config.bfd.
3018 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3020 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3022 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3024 * a29k-dis.c (print_insn): Print the opcode.
3026 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3028 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3030 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3032 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3034 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3036 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3037 which store a value into memory.
3039 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3041 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3042 * arm-dis.c, arm-opc.h: New files.
3044 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3046 * Makefile.in (ns32k-dis.o): Add dependency.
3047 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3048 string, not as array of chars.
3050 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3052 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3054 * sparc-opc.c: Added sparclite extended FP operations, and
3055 versions of v9 impdep* instructions permitting specification of
3058 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3060 * i960-dis.c (reg_names): Now const.
3061 (struct sparse_tabent): New type, copied from array type in mem
3063 (ctrl): Local static array ctrl_tab now const.
3064 (cobr): Local static array cobr_tab now const.
3065 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3066 static variable mem_tab no longer explicitly initialized. Changed
3067 mem_init to const array of struct sparse_tabent.
3068 (reg): Local static variable reg_tab no longer explicitly
3069 initialized. Changed reg_init to const array of struct
3071 (ea): Local static array scale_tab now const.
3073 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3076 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3078 * configure.bat: the disassember needs to be enabled for
3079 "objdump -d" to work in djgpp.
3081 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3083 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3084 (invalid_float): Enabled general version, doesn't require running
3085 on ns32k host. Changed to take char* argument, and test for
3086 explicitly specified sizes, instead of using sizeof() on host CPU
3088 (INVALID_FLOAT): Cast first argument.
3089 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3090 list_P032, list_M032): Now const.
3091 (optlist, list_search): Made appropriate arguments now point to
3093 (print_insn_arg): Changed static array of one-character-string
3094 pointers into a static const array of characters; fixed sprintf
3095 statement accordingly.
3097 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3099 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3100 from distribution. A ns32k-dis.c from a previous distribution has
3101 been brought up to date and supports the new interface.
3103 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3105 * configure.in: add bfd_ns32k_arch target support.
3107 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3108 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3110 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3112 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3115 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3117 * h8300-dis.c, mips-dis.c: Don't use true and false.
3119 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3121 * configure.in: Change --with-targets to --enable-targets.
3123 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3125 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3126 opcodes to the first instruction with that opcode, to speed
3127 disassembly of large files. From ralphc@pyramid.com (Ralph
3130 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3132 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3134 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3136 * configure.bat: update to latest makefile.in
3138 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3140 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3141 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3142 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3143 slot insn is in a delay slot.
3144 * z8k-opc.h: (resflg): Fix patterns.
3145 * h8500-opc.h Fix CR insn patterns.
3147 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3149 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3150 "cmpl" before POWER versions, so that gas -many uses them.
3152 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3154 * disassemble.c: New file.
3155 * Makefile.in (OFILES): Add disassemble.o.
3156 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3157 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3158 binutils/configure.in.
3160 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3161 opcode being examined.
3163 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3165 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3166 (insert_ral, insert_ram, insert_ras): New functions.
3167 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3168 RAS for store with update.
3170 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3172 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3173 (edelsohn@npac.syr.edu).
3175 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3177 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3180 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3182 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3184 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * ppc-opc.c (powerpc_operands): The signedp field has been
3187 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3188 instead. Add new operand SISIGNOPT.
3189 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3190 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3191 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3194 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3196 * i386-dis.c (struct private): Renamed to dis_private. `private'
3197 is a reserved word for dynix cc.
3199 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3201 * configure.in: Change error message to refer to bfd/config.bfd
3202 rather than bfd/configure.in.
3204 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3206 * ppc-opc.c: Define POWER2 as short alias flag.
3207 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3210 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * i960-dis.c (print_insn_i960): Don't read a second word for
3213 opcodes 0, 1, 2 and 3.
3215 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3217 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3219 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3221 * m68881-ext.c: Removed; no longer used.
3222 * Makefile.in: Changed accordingly.
3224 * m68k-dis.c (ext_format_68881): Don't declare.
3225 (print_insn_m68k): If an instruction uses place 'i', it uses at
3226 least four fixed bytes.
3227 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3228 extended float, convert to double using floatformat_to_double, not
3229 ieee_extended_to_double, and fetch the data before converting it.
3231 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3233 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3234 davidj@ICSI.Berkeley.EDU (David Johnson).
3236 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3238 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3239 PowerPC uses bdnz[l][a].
3241 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3243 * dis-buf.c, i386-dis.c: Include sysdep.h.
3245 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3247 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3249 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3250 by Motorola PowerPC 601 with PPC_OPCODE_601.
3251 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3252 Disassemble Motorola PowerPC 601 instructions as well as normal
3253 PowerPC instructions.
3255 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3257 * i960-dis.c (reg, mem): Just use a static array instead of
3260 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3262 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3263 condition name index if this is for a negated condition.
3265 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3266 Floating point format for 'H' operand is backwards from normal
3267 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3268 operands (fmpyadd and fmpysub), handle bizarre register
3269 translation correctly for single precision format.
3271 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3272 or 'I' operands if the next format specifier is 'M' (fcmp
3273 condition completer).
3275 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3277 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3278 single number giving a bitmask for the MB and ME fields of an M
3279 form instruction. Change NB to accept 32, and turn it into 0;
3280 also turn 0 into 32 when disassembling. Seperated SH from NB.
3281 (insert_mbe, extract_mbe): New functions.
3282 (insert_nb, extract_nb): New functions.
3283 (SC_MASK): Mask out SA and LK bits.
3284 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3285 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3286 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3287 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3288 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3289 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3290 (powerpc_macros): Define table of macro definitions.
3291 (powerpc_num_macros): Define.
3293 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3294 if PPC_OPERAND_NEXT is set.
3296 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3298 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3299 char. Retrieve contents using bfd_getl32 instead of shifting.
3301 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3303 * ppc-opc.c: New file. Opcode table for PowerPC, including
3304 opcodes for POWER (RS/6000).
3305 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3306 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3307 (CFILES): Add ppc-dis.c.
3308 (ppc-dis.o, ppc-opc.o): New targets.
3309 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3311 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3313 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3314 No space before 'u', 'f', or 'N'.
3316 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3318 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3319 farther than we should.
3321 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3323 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3325 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3327 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3329 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3330 needs it, to prevent reading past the end of a section.
3332 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3334 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3335 Removed t,A case for la; always use t,A(b) case.
3337 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3339 From Ted Lemen <mellon@pepper.ncd.com>
3340 * mips-dis.c (print_insn_arg): Handle 'k'.
3341 * mips-opc.c: Make cache use k, not t.
3343 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3345 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3346 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3347 FLOAT_FORMAT_CODE to put out floating point register names.
3349 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3351 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3353 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3355 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3357 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3359 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3360 larger than 32. Moved dsxx32 variants first for disassembler.
3362 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3364 * z8kgen.c, z8k-opc.h: Add full lda information.
3366 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3368 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3369 movb instructions. Any necessary space will be emitted by
3370 the code to handle nullification completers.
3372 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3374 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3376 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3378 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3379 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3381 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3383 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3385 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3387 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3388 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3390 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3392 * m88k-dis.c (m88kdis): comment change. Remove space after
3394 (printop): handle new arg types DEC and XREG for m88110.
3396 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3398 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3399 type for absolute branch addresses. Delete special
3400 "ble" and "be" code in 'W' operand code.
3402 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3404 * mips-opc.c: Set hazard information correctly for branch
3405 likely instructions.
3407 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3409 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3410 info->fprintf_func for printing and info->print_address_func for
3413 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3415 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3417 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3419 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3420 Corrected second case of "b" for disassembler.
3422 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3424 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3425 to BFD swapping routines to correspond to BFD name changes.
3427 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3429 * mips-opc.c: Change div machine instruction to be z,s,t rather
3430 than s,t. Change div macro to be d,v,t rather than d,s,t.
3431 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3432 rem and remu which generates only the corresponding div
3433 instruction. This is for compatibility with the MIPS assembler,
3434 which only generates the simple machine instruction when an
3435 explicit destination of $0 is used.
3436 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3438 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3440 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3441 WR_31 hazard for bal, bgezal, bltzal.
3443 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3445 * hppa-dis.c (print_insn_hppa): Use print function
3446 from within the disassemble_info, not fprintf_filtered.
3448 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3450 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3451 Law, law@cs.utah.edu.)
3453 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3455 * mips-opc.c ("absu"): Removed.
3458 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3460 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3461 Changed hazard information to distinguish between memory load
3462 delays and coprocessor load delays.
3464 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3466 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3468 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3470 * configure.in: Don't pass cpu to config.bfd.
3472 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3474 * m88k-dis.c (m88kdis): Make class unsigned.
3476 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3478 * alpha-dis.c (print_insn_alpha): One branch format case was
3479 missing the instruction name.
3481 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3483 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3484 Add the arch-specific auxiliary files.
3485 (OFILES): Remove the arch-specific auxiliary files
3486 and use BFD_MACHINES instead of DIS_LIBS.
3487 * configure.in: Set BFD_MACHINES based on --with-targets option.
3489 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3491 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3494 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3496 * sparc-opc.c: Change CONST to const to deal with gcc
3497 -Dconst=__const -traditional.
3499 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3501 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3502 coprocessor instructions out of #if 0, and made them use new
3505 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3507 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3509 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3511 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3512 instruction, for use by the disassembler.
3514 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3515 hand-coded sign extensions that depended on 32-bit host ints.
3516 FIXME, we still depend on big-endian host bitfield ordering.
3517 (sparc_print_insn): Set the insn_info_valid field, and the
3518 other fields that describe the instruction being printed.
3520 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3522 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3523 `jmp' instead of just one of them.
3525 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3527 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3528 (fput_fp_reg_r): Renamed from fput_reg_r.
3529 (fput_fp_reg): New function.
3530 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3532 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3534 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3536 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3538 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3540 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3541 don't output a space.
3543 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3545 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3547 * mips-opc.c: New file, containing opcode table from
3548 ../include/opcode/mips.h.
3549 * Makefile.in: Add it.
3551 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3553 * m88k-dis.c: New file, moved in from gdb and changed to use the
3554 new dis-asm.h disassembler interface.
3555 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3556 (m88k-dis.o): New target.
3558 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3560 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3561 argument string const char * to correspond to opcode/mips.h.
3563 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3565 * mips-dis.c: Updated to account for name changes in new version
3567 * Makefile.in: Added header file dependencies.
3569 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3571 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3573 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3575 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3576 extend, rather than shifts.
3578 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3580 * Makefile.in: Undo 15 June change.
3582 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3584 * m68k-dis.c (print_insn_arg): Change return value to byte count
3586 * m68k-dis.c: Re-write to detect invalid operands before
3587 printing anything, so we can handle this the same way we
3588 handle invalid opcodes.
3590 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3592 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3594 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3596 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3599 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3601 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3603 * configure.in: Do make sysdep.h link.
3604 * Makefile.in: Search ../include. Don't search ../bfd.
3606 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3608 Changes from Jeff Law, law@cs.utah.edu:
3609 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3610 Do not print a space before the completers specified by
3613 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3615 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3616 defined, since gdb has been fixed.
3618 Changes from Jeff Law, law@cs.utah.edu:
3619 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3620 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3621 be a *disassemble_info, not a *FILE.
3622 * hppa-dis.c: Support 'd', '!', and 'a'.
3623 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3624 * hppa-dis.c: Delete cases which are no longer needed.
3626 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3628 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3630 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3632 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3635 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3637 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3638 * configure.in: No longer need to configure to get sysdep.h.
3640 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3642 * Patches from Jeffrey Law <law@cs.utah.edu>.
3643 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3644 templates for 1.1 FP computational instructions.
3646 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3648 * h8500-dis.c (print_insn_h8500): Address argument is type
3650 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3653 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3654 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3656 * sparc-dis.c (compare_opcodes): Move static declaration to
3659 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3661 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3662 instruction, remove unimp hack from 'l' argument.
3664 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3666 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3669 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3671 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3672 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3675 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3677 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3678 arrays of string pointers to 2-d arrays of chars, to save
3681 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3683 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3684 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3686 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3688 * hppa-dis.c: New file from Utah, adapted to new disassembler
3690 * Makefile.in: Include it.
3692 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3694 * sh-dis.c, sh-opc.h: New files.
3696 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3698 * alpha-dis.c, alpha-opc.h: New files.
3700 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3702 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3705 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3707 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3709 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3711 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3714 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3716 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3717 and double percent signs a few places.
3719 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3721 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3722 Use info->print_address_func not print_address.
3724 * dis-buf.c (generic_print_address): New function.
3726 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3728 * Makefile.in: Add sparc-dis.c.
3729 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3731 Add `add' instruction to the set that get checked
3732 for a preceding `sethi' in order to print an absolute address.
3733 * (print_insn): Disassembly prefers real instructions.
3734 (is_delayed_branch): Speed up.
3735 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3736 Still missing some float ops, and needs testing.
3737 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3738 F_ALIAS. Use printf, not fprintf, when not passing a file
3740 (compare_opcodes): Check that identical instructions have
3741 identical opcodes, complain otherwise.
3744 * Include reg_names.
3746 Use dis-asm.h/read_memory_func interface.
3748 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3750 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3751 deliberately return non-zero to setjmp from longjmp. Otherwise
3752 this code fails to compile.
3754 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3756 * m68k-dis.c: Fix prototype for fetch_arg().
3758 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3760 * dis-buf.c: New file, for new read_memory_func interface.
3761 Makefile.in (OFILES): Include it.
3762 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3763 Use new read_memory_func interface.
3765 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3767 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3768 * h8500-opc.h: Fix couple of opcodes.
3770 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3772 * Makefile.in: add dvi & installcheck targets
3774 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3776 * Makefile.in: Update for h8500-dis.c.
3778 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3780 * h8500-dis.c, h8500-opc.h: New files
3782 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3784 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3785 ../include/dis-asm.h.
3786 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3787 and ../gdb/m68k-pinsn.c).
3788 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3789 and ../gdb/i386-pinsn.c).
3790 * m68881-ext.c: New file. Moved definition of
3791 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3792 * Makefile.in: Adjust for new files.
3793 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3794 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3795 can be dis-assembled.
3797 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3799 * mips-dis.c (print_insn_arg): Now returns void.
3801 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3803 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3804 files that use the macros.
3806 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3808 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3809 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3810 (CFILES): Added mips-dis.c.
3812 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3814 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3815 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3817 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3819 * Makefile.in: Improve *clean rules.
3820 * configure.in: Allow a default host.
3822 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3824 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3825 files include other sysdep files
3827 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3829 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3831 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3833 * configure.in: For host support, use ../bfd/configure.host
3834 so it stays in sync with the ../bfd/hosts database.
3836 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3838 * configure.in: use cpu-vendor-os triple instead of nested cases
3840 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3842 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3843 *always* the wrong one.
3845 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3847 * z8kgen.c: added copyright info
3849 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3851 * z8k-dis.c (unparse_instr): prettier tabs
3852 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3854 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3856 * configure.in: Add ncr* configuration.
3857 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3858 picayune ANSI compilers happy.
3860 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3862 * configure.in (i386): Make i386 and i486 synonymous for now.
3863 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3865 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3867 * Makefile.in (install): Fix typo.
3869 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3871 * Makefile.in (make): Remove obsolete crud.
3872 (sparc-opc.o): Avoid Sun Make VPATH bug.
3874 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3876 * Makefile.in: since there are no SUBDIRS, remove rule and
3877 references of subdir_do.
3879 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3881 * Makefile.in (install): Get the library name right here too.
3882 Don't install bfd.h, since it's unrelated to this library. No
3883 subdirs to recurse into, either.
3884 (CFILES): The source file has a .c suffix, not .o.
3886 * sparc-opc.c: New file, moved from BFD.
3887 * Makefile.in (OFILES): Build it.
3889 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3891 * z8k-dis.c: fixed forward refferences of some declarations.
3893 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3895 * Makefile.in: get the name of the library right
3897 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3899 * z8k-dis.c: knows how to disassemble z8k stuff
3900 * z8k-opc.h: new file full of z8000 opcodes
3904 version-control: never