1 1999-06-13 Ian Lance Taylor <ian@zembu.com>
3 * i386-dis.c (FWAIT_OPCODE): Define.
4 (used_prefixes): New static variable.
5 (fetch_data): Don't print an error message if we have already
6 fetched some bytes successfully.
7 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
8 (prefix_name): New static function.
9 (print_insn_i386): If setjmp fails, indicating a data error, but
10 we have managed to fetch some bytes, print the first one as a
11 prefix or a .byte pseudo-op. If fwait is followed by a non
12 floating point instruction, print the first prefix. Set
13 used_prefixes when prefixes are used. If any prefixes were not
14 used after disassembling the instruction, print the first prefix
15 instead of printing the instruction.
16 (putop): Set used_prefixes when prefixes are used.
17 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
18 (OP_DIR, OP_SIMD_Suffix): Likewise.
20 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
22 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
23 Support signx %reg, clruw %reg.
25 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
27 * sparc-opc.c: Add aliases Solaris as supports.
29 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
31 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
32 * Makefile.in: Regenerated.
34 1999-06-03 Philip Blundell <philb@gnu.org>
36 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
37 when target is PC-relative.
39 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
41 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
44 * m68k-dis.c (fetch_arg): Add places `n', `o'.
46 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
47 Add mcf5206e to appropriate instructions.
48 Add alias for MAC, MSAC.
50 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
53 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
54 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
56 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
58 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
60 * i386-dis.c (Ed): Define.
61 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
63 (OP_rm): Rename to OP_Rd.
66 (putop): Add const to template and p.
67 (print_insn_x86): Delete.
68 (print_insn_i386): Merge old function print_insn_x86. Add const
70 (struct dis386): Add const to name.
71 (dis386_att, dis386_intel): Add const.
72 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
73 (names32, names16, names8, names_seg, index16): Add const.
74 (grps, prefix_user_table, float_reg): Add const.
75 (float_mem_att, float_mem_intel): Add const.
76 (oappend): Add const to s.
77 (OP_REG): Add const to s.
78 (ptr_reg): Add const to s.
79 (dofloat): Add const to dp.
80 (OP_C): Don't skip modrm, it's now done in OP_Rd.
83 (OP_Rd): Check for valid mod. Call Op_E to print.
84 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
85 (OP_MS): Check for valid mod. Call Op_EM to print.
86 (OP_3DNowSuffix): Set obufp and use oappend rather than
87 strcat. Call BadOp() for errors.
88 (OP_SIMD_Suffix): Likewise.
89 (BadOp): New function.
91 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
93 * i386-dis.c (dis386_intel): Remove macro chars, except for
94 jEcxz. Change cWtR and cRtd to cW and cR.
95 (dis386_twobyte_intel): Remove macro chars here too.
96 (putop): Handle R and W macros for intel mode.
98 * i386-dis.c (SIMD_Fixup): New function.
99 (dis386_twobyte_att): Use it on movlps and movhps, and change
100 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
101 (dis386_twobyte_intel): Same here.
103 * i386-dis.c (Av): Remove.
107 (OP_SIMD_Suffix): New function.
108 (OP_DIR): Remove dead code.
109 (eAX_reg..eDI_reg): Renumber.
110 (onebyte_has_modrm): Table numbering comments.
111 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
112 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
113 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
114 and handle SIMD cmp insns in OP_SIMD_Suffix.
115 (info->bytes_per_line): Bump from 5 to 6.
117 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
118 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
120 PIII SIMD support from Doug Ledford <dledford@redhat.com>
121 * i386-dis.c (XM, EX, None): Define.
122 (OP_XMM, OP_EX, OP_None): New functions.
123 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
124 (GRP14): Rename to GRPAMD.
125 (GRP*): Add USE_GROUPS flag.
127 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
128 (twobyte_has_modrm): Add SIMD entries.
129 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
130 (grps): Add SIMD insns.
131 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
132 oappend repz if uses_f3_prefix. Add code to handle new groups for
135 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
136 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
137 operand from Av to Jv.
139 1999-05-07 Nick Clifton <nickc@cygnus.com>
141 * mcore-dis.c (print_insn_mcore): Use .short to display
142 unidentified instructions, not .word.
144 1999-04-26 Tom Tromey <tromey@cygnus.com>
146 * aclocal.m4, configure: Updated for new version of libtool.
148 1999-04-14 Doug Evans <devans@casey.cygnus.com>
150 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
151 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
153 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
155 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
158 1999-04-10 Doug Evans <devans@casey.cygnus.com>
160 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
161 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
163 1999-04-06 Ian Lance Taylor <ian@zembu.com>
165 * opintl.h (LC_MESSAGES): Never define.
167 1999-04-04 Ian Lance Taylor <ian@zembu.com>
169 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
170 (separator_char, scale_char): Likewise.
171 (print_insn_x86): Likewise.
172 (print_insn_i386): Likewise. Add declaration.
174 1999-03-26 Doug Evans <devans@casey.cygnus.com>
176 * fr30-dis.c: Rebuild.
177 * m32r-dis.c: Rebuild.
179 1999-03-23 Ian Lance Taylor <ian@zembu.com>
181 * m68k-opc.c: Change compare instructions to use "@s" rather than
182 ";s" when used with an immediate operand.
184 1999-03-22 Doug Evans <devans@casey.cygnus.com>
186 * cgen-opc.c (cgen_set_cpu): Delete.
187 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
188 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
190 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
192 * po/opcodes.pot: Rebuild.
194 1999-03-16 Martin Hunt <hunt@cygnus.com>
196 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
198 1999-03-11 Doug Evans <devans@casey.cygnus.com>
200 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
201 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
202 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
203 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
204 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
205 * m32r-opinst.c: Rebuild.
207 1999-02-25 Doug Evans <devans@casey.cygnus.com>
209 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
210 (cgen_hw_lookup_by_num): Rewrite.
211 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
212 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
213 * m32r-opinst.c: Rebuild.
215 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
217 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
218 (insert_jhint): Fix insertion mask.
219 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
221 1999-02-10 Doug Evans <devans@casey.cygnus.com>
223 * Makefile.in: Rebuild.
225 1999-02-09 Doug Evans <devans@casey.cygnus.com>
227 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
228 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
229 * Makefile.am: Remove references to them.
230 (HFILES): Add fr30-desc.h,m32r-desc.h.
231 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
233 (ALL_MACHINES): Update.
234 * configure.in: Redo handling of cgen_files.
235 (bfd_i960_arch): Delete i960c-*.lo files.
236 * configure: Regenerate.
237 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
238 (hash_insn_array): Rewrite.
239 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
240 (hash_insn_array): Rewrite.
241 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
242 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
243 (cgen_lookup_get_insn_operands): Ditto.
244 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
245 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
246 * po/POTFILES.in: Rebuild.
247 * po/opcodes.pot: Rebuild.
249 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
251 * Makefile.am: Rebuild dependencies.
252 (HFILES): Add fr30-opc.h.
253 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
254 * Makefile.in: Rebuild.
256 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
257 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
259 * acconfig.h: Remove.
260 * configure: Rebuild with current autoconf/automake.
261 * aclocal.m4: Likewise.
262 * config.in: Likewise.
263 * Makefile.in: Likewise.
265 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
267 * m68k-opc.c: Correct move (not movew) to status word on 5200.
269 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
271 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
272 * i386-dis.c (x_mode): Define.
276 (dis386_twobyte): Remove.
277 (dis386_twobyte_att): New.
278 (dis386_twobyte_intel): New.
279 (print_insn_x86): Use new arrays.
281 (float_mem_intel): New.
282 (float_mem_att): New.
283 (dofloat): Use new float_mem arrays.
284 (print_insn_i386_att): New.
285 (print_insn_i386_intel): New.
286 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
287 (putop): Handle intel syntax.
288 (OP_indirE): Handle intel syntax.
289 (OP_E): Handle intel syntax.
290 (OP_I): Handle intel syntax.
291 (OP_sI): Handle intel syntax.
292 (OP_OFF): Handle intel syntax.
296 1999-01-27 Doug Evans <devans@casey.cygnus.com>
298 * fr30-opc.h,fr30-opc.c: Rebuild.
299 * i960c-opc.h,i960c-opc.c: Rebuild.
300 * m32r-opc.c: Rebuild.
302 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
304 * hppa-dis.c: revert HP merge changes until HP gives us
307 1999-01-19 Nick Clifton <nickc@cygnus.com>
309 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
310 offsets as well as symbloic address.
312 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
314 * hppa-dis.c: fix comments and some indentation.
316 1999-01-12 Doug Evans <devans@casey.cygnus.com>
318 * fr30-opc.c,i960c-opc.c: Regenerate.
320 1999-01-11 Doug Evans <devans@casey.cygnus.com>
322 * fr30-opc.c: Regenerate.
324 1999-01-06 Doug Evans <devans@casey.cygnus.com>
326 * m32r-dis.c: Regenerate.
328 1999-01-05 Doug Evans <devans@casey.cygnus.com>
330 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
331 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
332 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
334 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
336 * configure.in: Require autoconf 2.12.1 or higher.
338 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
340 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
342 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
344 * fr30-opc.c: Regenerated.
346 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
348 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
350 1998-12-15 Dave Brolley <brolley@cygnus.com>
352 * fr30-opc.c,fr30-opc.h: Regenerated.
354 1998-12-14 Dave Brolley <brolley@cygnus.com>
356 * fr30-opc.c,fr30-opc.h: Regenerated.
358 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
360 * fr30-opc.c,fr30-opc.h: Regenerated.
362 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
364 * m32r-opc.c: Regenerate.
366 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
368 * dis-buf.c (generic_strcat_address): reformat to GNU coding
369 conventions. change sprintf call to an sprintf_vma call.
371 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
373 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
375 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
377 The following changes were made by
378 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
379 David Taylor <taylor@texas.cygnus.com>, and
380 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
381 merge in changes by HP; HP did not create ChangeLog entries.
383 * dis-buf.c (generic_strcat_address): new function.
385 * hppa-dis.c: Changes to improve hppa disassembly.
386 Changed formatting in : reg_names, fp_reg_names,control_reg,
387 New variables : sign_extension_names, deposit_names, conversion_names
388 float_test_names, compare_cond_names_double, add_cond_names_double,
389 logical_cond_names_double, unit_cond_names_double,
390 branch_push_pop_names, saturation_names, shift_names, mix_names,
391 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
392 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
393 (fput_const): renamed as fput_hex_const
395 - use the macros fputs_filtered and
396 fput_decimal_const whenever possible; calls to sign_extend require
397 2 params -- add a missing second param of 0.
398 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
399 architecture version number of current machine. HP folks are
400 trying to handle situation where the target program was compiled
401 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
403 - added new cases : 'g', 'B', 'm'
404 - added cases specifically for PA 2.0
405 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
406 - calls to fput_const become calls to fput_hex_const
408 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
410 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
411 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
412 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
413 * Makefile.in: Rebuilt.
414 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
416 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
417 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
419 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
421 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
423 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
425 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
427 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
428 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
430 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
432 * fr30-opc.c: Regenerate.
434 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
436 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
438 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
440 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
442 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
444 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
446 1998-11-30 Doug Evans <devans@casey.cygnus.com>
448 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
449 CGEN_INSN_BASE_VALUE.
450 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
451 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
453 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
455 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
457 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
459 * fr30-asm.c,fr30-dis.c: Regenerated.
461 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
463 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
465 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
467 * fr30-opc.c: Regenerated.
469 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
471 * fr30-opc.c: Regenerated.
472 * fr30-opc.h: Regenerated.
473 * fr30-dis.c: Regenerated.
474 * fr30-asm.c: Regenerated.
476 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
478 * mips-opc.c (sync.p,sync.l): Swap insn values.
480 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
482 * fr30-opc.c: Regenerate.
484 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
486 * fr30-opc.c: Regenerated.
487 * fr30-opc.h: Regenerated.
489 1998-11-18 Doug Evans <devans@casey.cygnus.com>
491 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
492 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
494 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
496 * fr30-opc.c: Regenerated.
498 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
500 * fr30-opc.c: Regenerated.
501 * fr30-opc.h: Regenerated.
502 * fr30-dis.c: Regenerated.
503 * fr30-asm.c: Regenerated.
505 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
507 * po/opcodes.pot: Regenerated.
508 * fr30-opc.c: Regenerated.
509 * fr30-opc.h: Regenerated.
510 * fr30-dis.c: Regenerated.
511 * fr30-asm.c: Regenerated.
513 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
515 * disassemble.c (disassembler): Add support for FR30 target.
517 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
519 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
520 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
522 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
524 * po/opcodes.pot: Regenerate.
525 * po/POTFILES.in: Regenerate.
526 * fr30-opc.c: Regenerate.
527 * fr30-opc.h: Regenerate.
529 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
531 * m32r-asm.c: Regenerate.
533 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
535 * configure.in: Added case for bfd_fr30_arch.
536 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
537 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
538 (CLEANFILES): Added stamp-fr30.
540 * fr30-asm.c: New file.
541 * fr30-dis.c: New file.
542 * fr30-opc.c: New file.
543 * fr30-opc.h: New file.
544 * po/POTFILES.in: Regenerated
545 * po/opcodes.pot: Regenerated
547 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
549 * configure.in: detect cygwin* instead of cygwin32*
550 * configure: regenerate
552 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
554 * mips-opc.c (IS_M): Added.
556 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
558 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
560 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
562 * m32r-opc.h,m32r-opc.c: Regenerate.
564 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
566 * i386-dis.c (OP_3DNowSuffix): New static function.
569 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
570 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
571 (insn_codep): New static variable.
572 (print_insn_x86): Init insn_codep after prefixes.
573 (grps): Add GRP14 entries for prefetch, prefetchw.
576 From Jeff B Epler <jepler@usgs.gov>
577 * i386-dis.c (Suffix3DNow): New table.
579 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
581 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
583 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
585 * d10v-dis.c (print_operand): If num is nonzero, then
586 add OPERAND_ACC1, not OPERAND_ACC0.
588 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
590 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
593 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
595 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
598 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
600 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
602 1998-09-09 Michael Meissner <meissner@cygnus.com>
604 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
607 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
609 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
611 (print_insn_little_arm): Detect Thumb symbols in elf object
614 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
616 * alpha-dis.c (print_insn_alpha): Use the machine type to
617 decide which PALcode set to include.
619 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
621 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
623 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
625 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
626 MSUB and MSUBS instructions.
628 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
630 * ppc-opc.c (powerpc_operands): Omit parens around additions in
633 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
635 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
636 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
637 +, -, and d for ColdFire.
639 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
640 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
641 (extract_mbe): Likewise.
643 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
645 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
647 * m10300-opc.c: First cut at UDF instructions.
649 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
651 * m32r-opc.c: Regenerate (remove semantic descriptions).
653 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
655 * arm-dis.c (print_insn_big_arm): Fix indentation.
656 (print_insn_little_arm): Likewise.
658 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
660 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
662 (print_insn_little_arm): Likewise.
664 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
666 Move all global state data into opcode table struct, and treat
667 opcode table as something that is "opened/closed".
668 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
669 (cgen_asm_init): Delete.
670 (cgen_set_parse_operand_fn): New function.
671 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
672 (cgen_dis_init): Delete.
673 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
674 (cgen_current_{opcode_table_mach,endian}): Delete.
675 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
677 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
679 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
682 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
684 * m10300-opc.c: Add entries for "no_match_operands" field in
687 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
689 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
691 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
693 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
695 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
697 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
699 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
701 (OP_J): Remove unnecessary subtraction when 16-bit displacement
702 will be masked later.
704 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
706 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
708 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
710 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
712 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
714 * m10300-dis.c: Only recognize instructions from the currently
716 * m10300-opc.c: Add field indicating the particular variant of
717 the mn10300 each instruction is available on.
719 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
721 * configure.in: For bfd_vax_arch, build vax-dis.lo.
722 * Makefile.am: Rebuild dependencies.
723 (CFILES): Add vax-dis.c.
724 (ALL_MACHINES): Add vax-dis.lo.
725 * aclocal.m4: Rebuild with current libtool.
726 * configure, Makefile.in: Rebuild.
728 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
730 * vax-dis.c: New file, from work by Pauline Middelink
731 <middelin@polyware.iaf.nl>.
732 * disassemble.c (ARCH_vax): Define if ARCH_all.
733 (disassembler): Add case for ARCH_vax.
734 * makefile.vms: Support compilation on vms/vax.
736 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
738 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
739 related to sign extension and the size of ints.
741 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
743 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
744 instructions. Support (sp) addressing mode by expanding it into
747 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
749 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
751 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
753 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
755 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
757 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
760 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
762 * mips-dis.c (print_insn_little_mips): Previously, instruction
763 printing references the symbol table to determine whether the
764 instruction resides in a block regular instructions or mips16
765 instructions. However, when the disassembler gets used in other
766 environments where the symbol table is not present, we no longer
767 rely in the symbol table, rather, use the low bit of the
768 instructions address to guess. There should be no change for usage
769 of the disassembler in host based programs, gdb, objdump.
770 (print_insn_big_mips): ditto.
771 (print_insn_mips): ditto
773 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
775 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
777 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
779 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
781 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
783 * i386-dis.c (index16): Add '%' to register names. Use ','
786 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
788 * i386-dis.c: Don't print opcode suffix when we can figure out the
789 size (and gas can!) by register operands, or from the default
791 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
793 (dis386, dis386_twobyte, grps): Use new suffix macros.
794 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
795 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
796 order of cmps operands to agree with Intel docs. Correct operand
797 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
798 agree with Intel docs.
799 (print_insn_x86): Print orphan fwait before other prefixes.
800 Return correct byte count for orphan fwait with prefixes. Don't
801 print `bound' operands in reverse order.
802 (ckprefix): Stop accumulating prefixes if we get fwait.
803 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
805 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
807 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
808 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
810 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
812 Fix problems when bfd_vma is wider than long.
813 * i386-dis.c: Make op_address and start_pc unsigned.
814 (set_op): Make parameter unsigned.
815 (print_insn_x86): Cast to bfd_vma when passing a value to
817 * ns32k-dis.c (CORE_ADDR): Don't define.
818 (print_insn_ns32k): Change type of addr to bfd_vma. Use
819 bfd_scan_vma to read back address.
820 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
822 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
823 (NEXTULONG): New definition.
824 (print_insn_m68k): Avoid overflow when computing third argument of
826 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
827 Use disp instead of val to store offset values.
828 (print_indexed): Use base_disp instead of word to store base
829 displacement, to avoid overflow.
830 * m10300-dis.c (disassemble): Cast value to long when computing
831 pc-relative address, to get correct sign extension.
833 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
835 * m32r-opc.c: Regenerate.
837 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
839 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
840 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
842 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
844 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
846 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
848 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
850 (OP_DSreg): Rename from OP_DSSI.
851 (OP_ESreg): Rename from OP_ESDI.
852 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
854 (append_seg): Rename from append_prefix.
855 (ptr_reg): New function.
856 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
858 (PREFIX_ADDR): Rename from PREFIX_ADR.
859 (float_reg): Add non-broken opcodes for people who don't want
862 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
864 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
867 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
869 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
871 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
873 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
874 0; produce error message for shifts of size 32 (or 64 for 64-bit
875 shifts), because the hardware doesn't support them.
877 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
879 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
880 LONG_2, LONG_2b formats to use this new operand.
882 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
884 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
886 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
888 * sparc-dis.c (print_insn_sparc): big endian instruction / little
891 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
893 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
894 and SHORT_B3b formats to use Rb instead of Ra.
896 Add FLAG_MUL16 to MUL2XH opcode.
898 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
899 to existing 1.1.1 parallelisation prohibition procedure.
901 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
903 * m32r-asm.c,m32r-dis.c: Regenerate.
905 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
907 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
908 with a shift count of 0.
910 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
912 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
913 (cgen_hw_lookup_by_num): New function.
915 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
917 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
919 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
921 * sparc-dis.c (print_insn_sparc): Always fetch instructions
922 as big-endian on SPARClite.
924 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
926 * d30v-opc.c (pre_defined_register): Remove alias for r0.
928 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
930 * po/Make-in (install-info): New target.
932 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
934 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
935 * configure: Rebuild.
937 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
939 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
940 variety of ISA2 instructions to set bottom ten bits of trap code.
942 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
944 * Makefile.am (config.status): Add explicit target so that
945 config.status depends upon bfd/configure.in.
946 * Makefile.in: Rebuild.
948 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
950 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
951 instructions to set bottom ten bits of break code.
952 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
953 for above optional argument.
955 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
957 * makefile.vms: Run dec c with /nodebug.
959 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
961 * Makefile.in: Rebuilt.
962 * Makefile.am: Regenerated dependencies with mkdep.
964 * opintl.h (_): Define as dgettext.
966 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
968 * cgen-asm.c: Internationalised.
969 * m32r-asm.c: Internationalised.
970 * m32r-dis.c: Internationalised.
971 * m32r-opc.c: Internationalised.
973 * aclocal.m4: Regenerated.
974 * configure: Regenerated.
975 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
976 * Makefile.in: Rebuild.
977 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
978 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
980 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
982 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
984 * aclocal.m4, configure: Rebuild with current tools.
986 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
988 * opintl.h: New file - contains internationalisation macros used
989 by source files in this directory.
990 * po/: New subdirectory - contains internationalisation files.
991 * po/Make-in: New file - Makefile constructor.
992 * po/POTFILES.in: New file - list of files in opcodes directory
993 that should be scan for internationalisation macros.
994 * po/opcodes.pot: New file - list of internationisation strings
995 found in files mentioned in po/POTFILES.in.
996 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
997 entry. Add intl directory to include paths.
998 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
999 HAVE_STRCPY, HAVE_LC_MESSAGES
1000 * configure.in: Add rule to build Makefile in po subdirectory.
1001 * Makefile.in: Rebuilt.
1002 * aclocal.m4: Rebuilt.
1003 * config.in: Rebuilt.
1004 * configure: Rebuilt.
1005 * alpha-opc.c: Internationalised.
1006 * arc-dis.c: Internationalised.
1007 * arc-opc.c: Internationalised.
1008 * arm-dis.c: Internationalised.
1009 * cgen-asm.c: Internationalised.
1010 * d30v-dis.c: Internationalised.
1011 * dis-buf.c: Internationalised.
1012 * h8300-dis.c: Internationalised.
1013 * h8500-dis.c: Internationalised.
1014 * i386-dis.c: Internationalised.
1015 * m10200-dis.c: Internationalised.
1016 * m10300-dis.c: Internationalised.
1017 * m68k-dis.c: Internationalised.
1018 * m88k-dis.c: Internationalised.
1019 * mips-dis.c: Internationalised.
1020 * ns32k-dis.c: Internationalised.
1021 * opintl.h: Internationalised.
1022 * ppc-opc.c: Internationalised.
1023 * sparc-dis.c: Internationalised.
1024 * v850-dis.c: Internationalised.
1025 * v850-opc.c: Internationalised.
1027 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1029 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1030 (asm_hash_table_entries): New variable.
1031 (cgen_asm_init): Free asm_hash_table_entries.
1032 (hash_insn_array,hash_insn_list): New functions.
1033 (build_asm_hash_table): Use them. Hash macro insns as well.
1034 (cgen_asm_lookup_insn): Update.
1035 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1036 (dis_hash_table_entries): New variable.
1037 (cgen_dis_init): Free dis_hash_table_entries.
1038 (hash_insn_array,hash_insn_list): New functions.
1039 (build_dis_hash_table): Use them. Hash macro insns as well.
1040 (cgen_dis_lookup_insn): Update.
1041 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1042 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1043 (cgen_macro_insn_count): New function.
1044 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1046 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1048 * i386-dis.c (OP_DSSI): Print segment override.
1050 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1052 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1055 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1057 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1058 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1059 * configure.in: Define and substitute WIN32LDFLAGS and
1061 * aclocal.m4: Rebuild with new libtool.
1062 * configure, Makefile.in: Rebuild.
1064 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1066 * m32r-opc.c: Regenerate.
1068 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1070 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1071 before trying to copy it.
1072 * Makefile.in: Rebuild.
1074 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1076 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1078 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1080 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1081 from an arbitrary valid buffer instead of fetching them on demand
1083 (invalid_float): use bit_extract_simple() instead of bit_extract().
1085 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1087 From H.J. Lu <hjl@gnu.org>:
1088 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1091 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1093 * Branched binutils 2.9.
1095 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1097 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1098 disassembling last 4 bytes of a section.
1100 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1102 Fix some gcc -Wall warnings:
1103 * arc-dis.c (print_insn): Add casts to avoid warnings.
1104 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1105 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1106 * m10200-dis.c (disassemble): Likewise.
1107 * m10300-dis.c (disassemble): Likewise.
1108 * ns32k-dis.c (print_insn_ns32k): Likewise.
1109 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1110 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1111 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1112 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1113 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1114 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1115 * tic80-dis.c (print_one_instruction): Likewise.
1116 * w65-dis.c (print_operand): Likewise.
1117 * z8k-dis.c (fetch_data): Likewise.
1118 * a29k-dis.c: Add return type for find_byte_func_type.
1119 * arc-opc.c: Include <stdio.h>. Remove declarations of
1120 insert_multshift and extract_multshift.
1121 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1123 (extract_value): Fully parenthesize expression.
1124 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1125 * h8500-opc.h (h8500_table): Fully bracket initializer.
1126 * w65-opc.h (optable): Likewise.
1127 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1128 * i386-dis.c (OP_E): Initialize local variables.
1129 * m10200-dis.c (print_insn_mn10200): Likewise.
1130 * mips-dis.c (print_insn_mips16): Likewise.
1131 * sh-dis.c (print_insn_shx): Likewise.
1132 * v850-dis.c (print_insn_v850): Likewise.
1133 * ns32k-dis.c (print_insn_arg): Declare.
1134 (get_displacement, invalid_float): Declare.
1135 (list_search, sign_extend, flip_bytes): Declare return type.
1136 (get_displacement): Likewise.
1137 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1139 (print_insn_ns32k): Make i unsigned.
1140 (invalid_float): Make static. Declare type of val.
1141 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1142 on each for iteration.
1143 * tic30-dis.c (get_indirect_operand): Likewise.
1144 * z8k-dis.c (print_insn_z8001): Declare return type.
1145 (print_insn_z8002): Likewise.
1146 (unparse_instr): Fix sprintf format strings.
1148 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1150 * mips-opc.c: Add "sync.l" and "sync.p".
1152 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1154 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1155 default m68k variant to recognize.
1157 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1158 (ctrl, cobr, mem, ea): Likewise.
1159 (print_addr): Likewise. Remove cast.
1160 (ea): Cast argument of print_addr to bfd_vma.
1162 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1164 (cgen_parse_unsigned_integer): Likewise.
1165 (cgen_parse_address): Likewise.
1167 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1169 * i960-dis.c (ctrl): Add full braces to structure initialization.
1170 (cobr, mem, reg): Likewise.
1171 (ea): Correct parenthesization in expression.
1173 * cgen-asm.c: Include <ctype.h>.
1174 (build_asm_hash_table): Remove unused local variable i.
1175 (cgen_parse_keyword): Add casts to avoid warnings.
1177 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1178 symbol. Fix indentation.
1179 (print_insn_little_arm): Likewise.
1181 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1183 * configure.in: Use AM_DISABLE_SHARED.
1184 * aclocal.m4, configure: Rebuild with libtool 1.2.
1186 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1188 These patches are courtesy of Jonathan Walton and Tony Thompson
1189 (athompso@cambridge.arm.com).
1191 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1194 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1195 both the offset and the label closest to the destination.
1197 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1199 * m32r-opc.h: Regenerate.
1201 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1203 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1205 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1207 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1208 assume that info->symbols is non-empty.
1210 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1212 * alpha-opc.c (cvtqs) There is no such thing.
1213 (cvttq): Missing most of the /*d variants.
1215 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1217 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1218 delayed branches or jumps.
1220 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1224 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1225 * tic30-dis.c (print_branch): Likewise.
1227 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1229 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1230 saved_symbol code as it is no longer needed.
1232 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1234 * cgen-asm.c: Include symcat.h.
1235 * cgen-dis.c,cgen-opc.c: Ditto.
1236 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1238 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1240 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1242 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1244 * m32r-opc.[ch]: Regenerate.
1246 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1248 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1249 arguments. Don't perform validation here.
1250 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1252 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1254 * m32r-opc.c: Regenerate.
1256 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1258 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1259 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1261 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1263 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1265 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1267 * configure.in: Get the version number from BFD.
1268 * configure: Rebuild.
1270 From H.J. Lu <hjl@gnu.org>:
1271 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1272 * Makefile.in: Rebuild.
1274 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1276 * m32r-opc.c: Regenerate.
1277 * m32r-opc.h: Regenerate.
1279 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1281 * m32r-opc.c: Regenerate.
1283 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1285 Fix rac to accept only a0:
1286 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1287 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1288 Introduce OPERAND_GPR.
1289 * d10v-dis.c (print_operand): Likewise.
1291 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1293 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1294 (cgen_hw_lookup): Make result const.
1295 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1297 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1299 * configure, aclocal.m4: Rebuild with new libtool.
1301 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1303 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1304 instructions use a PC relative branch, not absolute.
1306 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1308 * configure.in: Set libtool_enable_shared rather than
1309 libtool_shared. Remove diversion hack.
1310 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1312 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1314 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1315 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1317 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1319 * tic30-dis.c: New file.
1320 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1321 * configure.in: Handle bfd_tic30_arch.
1322 * Makefile.am: Rebuild dependencies.
1323 (CFILES): Add tic30-dis.c
1324 (ALL_MACHINES): Add tic30-dis.lo.
1325 * configure, Makefile.in: Rebuild.
1327 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1329 * m32r-opc.h (HAVE_CPU_M32R): Define.
1331 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1333 * v850-opc.c (insertion routines): If both alignment and size is
1334 wrong then report this.
1336 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1338 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1339 Only recognize instructions for the current target_processor.
1341 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1343 * d10v-dis.c (PC_MASK): Correct value.
1344 (print_operand): If there's a reloc, don't calculate the
1345 address because they could be in different sections.
1347 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1349 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1350 instruction after the 4650's "mul" instruction; nobody's using the
1351 4010 these days. If object files someday indicate which processor
1352 variant they're intended for, we can do a better job at this.
1354 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1356 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1357 table provided entry size. Use CGEN_INSN_MNEMONIC.
1358 (cgen_parse_keyword): Rewrite.
1359 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1360 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1361 * cgen-opc.c: Clean up pass over `struct foo' usage.
1362 (cgen_keyword_lookup_value): Handle "" entry.
1363 (cgen_keyword_add): Likewise.
1365 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1367 * mips-opc.c: Add FP_D to s.d instruction flags.
1369 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1371 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1373 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1375 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1376 PC relative offset forms before the 15 bit forms. An assembler command
1377 line option now chooses the default.
1379 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1381 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1382 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1384 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1386 * configure: Only build libopcodes shared if --enable-shared's value
1387 was `yes', or was set to `*opcodes*'.
1388 * aclocal.m4: Likewise.
1389 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1390 original source of this bit of code. It's not clear what the best fix
1393 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1395 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1396 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1397 offset forms before the 15 bit forms, to default to the long forms.
1399 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1401 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1403 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1405 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1406 symbol if none is present.
1407 (print_insn_big_arm): Prevent examination of stored symbol if
1410 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1412 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1414 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1416 * disassemble.c: Remove disasm_symaddr() function.
1418 * arm-dis.c: Use info->symbol instead of info->flags to determine
1419 if disassmbly should be in Thumb or Arm mode.
1421 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1423 * arm-dis.c: Add support for disassembling Thumb opcodes.
1424 (print_insn_thumb): New function.
1426 * disassemble.c (disasm_symaddr): New function.
1428 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1429 (thumb_opcodes): Table of Thumb opcodes.
1431 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1433 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1435 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1436 and 'v' as operand types.
1438 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1440 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1441 <olivier.carmona@di.epfl.ch>.
1442 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1443 which has a two word opcode with a one word argument.
1445 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1447 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1448 unsigned, not signed.
1449 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1451 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1453 * d10v-dis.c (print_operand):
1454 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1456 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1458 * d10v-opc.c (OPERAND_FLAG): Split into:
1459 (OPERAND_FFLAG, OPERAND_CFLAG) .
1463 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1465 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1466 field for all INSN_MACRO's.
1467 * mips16-opc.c: same
1469 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1471 * mips-opc.c (sync,cache): These are 3900 insns.
1473 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1475 sh-opc.h (sh_table): Remove ftst/nan.
1477 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1479 * mips-opc.c (ffc, ffs): Fix mask.
1481 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1483 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1486 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1488 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1489 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1491 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1493 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1494 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1496 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1498 * v850-dis.c (disassemble): Replace // with /* ... */
1500 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1502 * sparc-opc.c: Add wr & rd for v9a asr's.
1503 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1504 (v9a_asr_reg_names): New variable.
1505 Patch from David Miller <davem@vger.rutgers.edu>.
1507 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1509 * sparc-opc.c (v9notv9a): New insn type.
1510 (IMPDEP): Move to the end to not conflict with edge8 et al.
1511 Patch from David Miller <davem@vger.rutgers.edu>.
1513 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1515 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1517 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1519 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1521 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1523 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1524 of disassemble_info structure to determine if an overlay address
1525 has a matching symbol in low memory.
1527 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1528 new symbol_at_address_func field in disassemble_info structure.
1530 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1532 * v850-opc.c (extract_d22): Use signed arithmatic.
1534 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1536 * mips-opc.c: Three op mult is not an ISA insn.
1538 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1540 * mips-opc.c: Fix formatting.
1542 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1544 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1545 than assuming that char is signed. Explicitly sign extend 16 bit
1546 values, rather than assuming that short is 16 bits.
1547 (OP_sI, OP_J, OP_DIR): Likewise.
1549 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1551 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1554 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1556 * v850-opc.c: Fix typo in comment.
1558 * v850-dis.c (disassemble): Add test of processor type when
1559 determining opcodes.
1561 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1563 * configure.in: Use a diversion to set enable_shared before the
1564 arguments are parsed.
1565 * configure: Rebuild.
1567 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1569 * m68k-opc.c (TBL1): Use ! rather than `.
1570 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1572 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1574 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1576 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1578 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1581 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1582 * aclocal.m4: Rebuild with new libtool.
1583 * configure: Rebuild.
1585 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1587 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1589 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1591 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1593 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1595 * v850-opc.c (v850_opcodes): Further rearrangements.
1597 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1599 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1601 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1603 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1606 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1608 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1610 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1612 * v850-opc.c: Initialise processors field of v850_opcode structure.
1614 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1616 Merge changes from Martin Hunt:
1618 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1620 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1621 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1622 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1624 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1626 * d30v-dis.c (print_insn): First operand of d*i (delayed
1627 branch) instructions is relative.
1629 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1630 (d30v_operand_table): Add IMM6S3 type.
1631 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1633 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1634 and cmp instructions.
1636 * d30v-opc.c: Correct entries for repeat*, and sat*.
1637 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1638 types. Correct several formats.
1640 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1642 * d30v-opc.c (pre_defined_registers): Change control registers.
1644 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1645 SHORT_C2. Manual was incorrect.
1647 * d30v-dis.c (lookup_opcode): Return value now indicates
1648 if an opcode has a short and a long form. Used for deciding
1649 to append a ".s" or ".l".
1650 (print_insn): Append a ".s" to an instruction if it is
1651 the short form and ".l" if it is a long form. Do not append
1652 anything if the instruction has only one possible size.
1654 * d30v-opc.c: Change mulx2h to require an even register.
1655 New form: SHORT_A2; a SHORT_A form that needs an even
1656 register as the first operand.
1658 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1659 instruction was not being disassembled if there were an odd
1660 number of instructions.
1662 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1664 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1666 * v850-dis.c (disassemble): Improved display of register lists.
1668 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1670 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1671 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1672 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1673 fandnot1s, fandnot2s.
1675 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1677 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1679 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1681 * cgen-asm.c (cgen_parse_address): New argument resultp.
1682 All callers updated.
1683 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1685 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1687 * mn10200-dis.c (disassemble): PC relative instructions are
1688 relative to the next instruction, not the current instruction.
1690 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1692 * v850-dis.c (disassemble): Only signed extend values that are not
1693 returned by extract functions.
1694 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1696 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1698 * v850-opc.c: Update comments. Remove use of
1699 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1701 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1703 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1705 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1707 * configure: Rebuilt with latest devo autoconf for NT support.
1709 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1711 * v850-dis.c (disassemble): Use curly brace syntax for register
1714 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1715 where r0 is being used as a destination register.
1717 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1719 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1721 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1723 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1725 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1727 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1728 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1731 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1733 * configure (cgen_files): Add support for v850e target.
1734 * configure.in (cgen_files): Add support for v850e target.
1736 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1738 * configure (cgen_files): Add support for v850ea target.
1739 * configure.in (cgen_files): Add support for v850ea target.
1741 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1743 * configure.in (bfd_arc_arch): Add.
1744 * configure: Rebuild.
1745 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1746 * Makefile.in: Rebuild.
1747 * arc-dis.c, arc-opc.c: New files.
1748 * disassemble.c (ARCH_all): Define ARCH_arc.
1749 (disassembler): Add ARC support.
1751 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1753 * v850-dis.c (disassemble): Add support for v850EA instructions.
1755 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1756 (v850_opcodes): Add v850EA instructions.
1758 * v850-dis.c (disassemble): Add support for v850E instructions.
1760 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1761 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1762 insert_spe, extract_spe): New Functions.
1763 (v850_opcodes): Add v850E instructions.
1765 * v850-opc.c: Reorganised and re-layed out to improve readability
1768 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * configure: Rebuild with autoconf 2.12.1.
1772 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1774 * aclocal.m4, configure: Rebuild with new automake patches.
1776 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1778 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1779 * acinclude.m4: Just include acinclude.m4 from BFD.
1780 * aclocal.m4, configure: Rebuild.
1782 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1784 * Makefile.am: New file, based on old Makefile.in.
1785 * acconfig.h: New file.
1786 * acinclude.m4: New file.
1787 * stamp-h.in: New file.
1788 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1789 Removed shared library handling; now handled by libtool. Replace
1790 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1791 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1792 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1793 handling in AC_OUTPUT.
1794 * dep-in.sed: Change .o to .lo.
1795 * Makefile.in: Now built with automake.
1796 * aclocal.m4: Now built with aclocal.
1797 * config.in, configure: Rebuild.
1799 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1801 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1803 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1805 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1807 * sparc-dis.c (sorted_opcodes): New static local.
1808 (struct opcode_hash): `opcode' is pointer to const element.
1809 (build_hash): First arg is now table of sorted pointers.
1810 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1811 (compare_opcodes): Update.
1813 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1815 * cgen-opc.c: #include <ctype.h>.
1816 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1817 Handle case insensitive hashing.
1818 (hash_keyword_value): Change type of `value' to unsigned int.
1820 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1822 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1823 precision FP, mark it as such. Likewise for double precision
1824 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1827 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1829 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1831 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1832 nesting depth when all the macros are expanded.
1834 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1836 * sparc-opc.c: The fcmp v9a instructions take an integer register
1837 as a destination, not a floating point register. From Christian
1838 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1840 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1842 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1843 syntax. From Roman Hodek
1844 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1846 * i386-dis.c (twobyte_has_modrm): Fix pand.
1848 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1850 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1852 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1854 * arm-dis.c: Add prototypes for arm_decode_shift and
1857 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1859 * mips-opc.c: Add r3900 insns.
1861 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1863 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1864 print delay slot instructions on the same line. When using a PC
1865 relative load, add a comment with the value being loaded if it can
1868 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1870 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1871 to pushS/popS for segment regs and byte constant so that
1872 pushw/popw printed when in 16 bit data mode.
1874 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1875 print cbtw, cwtd in 16 bit data mode.
1876 * i386-dis.c (putop): extra case W to support above.
1878 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1879 address size prefix in 16 bit address mode.
1881 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1883 * sh-dis.c: Reindent. Rename local variable fprintf to
1886 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1888 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1890 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1892 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1894 * mips16-opc.c (mip16_opcodes): same.
1896 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1898 * m68k-opc.c (moveb): Change $d to %d.
1900 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1902 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1903 (twobyte_has_modrm): Likewise.
1905 (OP_MMX, OP_EM, OP_MS): New static functions.
1907 * i386-dis.c: Revert patch of April 4. The output now matches
1910 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1912 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1915 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1917 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1919 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1921 * Makefile.in (install): Depend upon installdirs.
1922 (installdirs): New target.
1924 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1926 From Thomas Graichen <graichen@rzpd.de>:
1927 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1928 * configure: Rebuild.
1930 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1932 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1933 Delete string{,s}.h support.
1935 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1937 * cgen-asm.c (cgen_parse_operand_fn): New global.
1938 (cgen_parse_{{,un}signed_integer,address}): Update call to
1939 cgen_parse_operand_fn.
1940 (cgen_init_parse_operand): New function.
1941 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1942 from cgen_asm_init_parse.
1943 (m32r_cgen_assemble_insn): New operand `errmsg'.
1944 Delete call to as_bad, return error message to caller.
1945 (m32r_cgen_asm_hash_keywords): #if 0 out.
1947 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1949 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1951 [case 'J']: Fix typo in register name.
1953 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * configure.in: Substitute SHLIB_LIBS.
1956 * configure: Rebuild.
1957 * Makefile.in (SHLIB_LIBS): New variable.
1958 ($(SHLIB)): Use $(SHLIB_LIBS).
1960 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1962 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1964 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1966 * disassemble.c (disassembler): Handle m32r.
1968 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1970 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1971 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1972 * Makefile.in (CFILES): Add them.
1973 (ALL_MACHINES): Add them.
1974 (dependencies): Regenerate.
1975 * configure.in (cgen_files): New variable.
1976 (bfd_m32r_arch): Add entry.
1977 * configure: Regenerate.
1979 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1981 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1982 * configure: Rebuild.
1984 * Makefile.in: Rebuild dependencies.
1986 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1988 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1991 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1993 * Branched binutils 2.8.
1995 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1997 * m10200-dis.c: Rename from mn10200-dis.c.
1998 * m10200-opc.c: Rename from mn10200-opc.c.
1999 * m10300-dis.c: Rename from mn10300-dis.c
2000 * m10300-opc.c: Rename from mn10300-opc.c.
2001 * Makefile.in: Update accordingly.
2003 * mips16-opc.c: Add mul and dmul macros.
2005 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2007 * makefile.vms: Update CFLAGS, add clean target.
2009 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2011 * mips-opc.c: Add "wait". From Ralf Baechle
2012 <ralf@gnu.ai.mit.edu>.
2014 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2015 * configure, config.in: Rebuild.
2016 * sysdep.h: Include <stdlib.h> if it exists.
2017 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2019 * Makefile.in: Rebuild dependencies.
2021 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2023 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2024 Andrew Bray <andy@madhouse.demon.co.uk>.
2026 * mips-opc.c: Add cast when setting mips_opcodes.
2028 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2030 * v850-dis.c (disassemble): Fix sign extension problem.
2031 * v850-opc.c (extract_d*): Fix sign extension problems to make
2032 disassembly calculate branch offsets correctly.
2034 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2036 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2038 * mips-opc.c: Add dctr and dctw.
2040 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2042 * d30v-dis.c (print_insn): Change the way signed constants
2045 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2047 * Makefile.in (BFD_H): New variable.
2048 (HFILES): New variable.
2049 (CFILES): Add all C files.
2050 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2051 Delete old dependencies, and build new ones.
2052 * dep-in.sed: New file.
2054 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2056 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2058 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2060 * mn10200-opc.c: Change "trap" to "syscall".
2061 * mn10300-opc.c: Add new "syscall" instruction.
2063 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2065 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2066 mulul insns on the coldfire.
2068 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2070 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2071 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2072 (print_insn_little_arm): Likewise.
2074 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2076 Based on patches from H.J. Lu <hjl@lucon.org>:
2077 * i386-dis.c (fetch_data): Add prototype.
2078 * m68k-dis.c (fetch_data): Add prototype.
2079 (dummy_print_address): Add prototype. Make static.
2080 * ppc-opc.c (valid_bo): Add prototype.
2081 * sparc-dis.c (build_hash_table): Add prototype.
2082 (is_delayed_branch, compute_arch_mask): Add prototypes.
2083 (print_insn_sparc): Make several local variables const.
2084 (compare_opcodes): Change arguments to const PTR. Add prototype.
2085 * sparc-opc.c (arg): Change name field to be const.
2086 (lookup_name, lookup_value): Add prototypes. Change table and
2087 name parameters to be const.
2088 (sparc_encode_asi): Change name parameter to be const.
2089 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2090 (sparc_encode_sparclet_cpreg): Likewise.
2091 (sparc_decode_asi): Change return type to be const.
2092 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2093 (sparc_decode_sparclet_cpreg): Likewise.
2095 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2097 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2098 Solaris doesn't like the combined options, and the -f is
2100 (stamp-tshlink, install): Likewise.
2102 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2104 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2107 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2109 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2111 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2113 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2116 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2118 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2120 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2122 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2124 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2126 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2128 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2130 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2131 floatformat_to_double to make portable.
2132 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2135 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2137 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2138 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2140 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2142 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2143 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2145 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2147 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2148 (OFF_SL_BR_SCALED): ... to this, and added the flag
2149 TIC80_OPERAND_BASEREL to the flags word.
2150 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2153 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2155 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2156 Change mips_opcodes from const array to a pointer,
2157 and change bfd_mips_num_opcodes from const int to int,
2158 so that we can increase the size of the mips opcodes table
2161 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2163 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2164 store BITNUM values in the table in one's complement form
2165 to match behavior when assembler is given a raw numeric
2166 value for a BITNUM operand.
2167 * tic80-dis.c (print_operand_bitnum): Ditto.
2169 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2171 * d30v-opc.c: Removed references to FLAG_X.
2173 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2175 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2177 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2179 * Makefile.in: Added d30v object files.
2180 * configure: (bfd_d30v_arch) Rebuilt.
2181 * configure.in: (bfd_d30v_arch) Added new case.
2182 * d30v-dis.c: New file.
2183 * d30v-opc.c: New file.
2184 * disassemble.c (disassembler) Add entry for d30v.
2186 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2188 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2189 representations for the floating point BITNUM values.
2191 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2193 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2194 in the table in one's complement form, as they appear in the
2196 (tic80_symbol_to_value): Use macros to access predefined
2198 (tic80_value_to_symbol): Ditto.
2199 (tic80_next_predefined_symbol): New function.
2200 * tic80-dis.c (print_operand_bitnum): Remove code that did
2201 one's complement for BITNUM values.
2203 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2205 * makefile.vms: Remove 8 bit characters. Update to latest
2208 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2210 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2212 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2214 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2215 (IMM24_PCREL): Likewise.
2217 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2220 address for an extended PC relative instruction that is not a
2223 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2225 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2228 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2230 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2231 (tic80_opcodes): Sort entries so that long immediate forms
2232 come after short immediate forms, making it easier for
2233 assembler to select the right one for a given operand.
2235 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2237 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2239 (print_insn_mips16): Likewise.
2241 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2243 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2244 a symbol class that restricts translation to just that
2245 class (general register, condition code, etc).
2247 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2249 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2250 and REG_DEST_E for register operands that have to be
2251 an even numbered register. Add REG_FPA for operands that
2252 are one of the floating point accumulator registers.
2253 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2254 (tic80_opcodes): Change entries that need even numbered
2255 register operands to use the new operand table entries.
2256 Add "or" entries that are identical to "or.tt" entries.
2258 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2260 * mips16-opc.c: Add new cases of exit instruction for
2262 * mips-dis.c (print_mips16_insn_arg): Display floating point
2263 registers in operands of exit instruction. Print `$' before
2264 register names in operands of entry and exit instructions.
2266 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2268 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2269 pairs for all predefined symbols recognized by the assembler.
2270 Also used by the disassembling routines.
2271 (tic80_symbol_to_value): New function.
2272 (tic80_value_to_symbol): New function.
2273 * tic80-dis.c (print_operand_control_register,
2274 print_operand_condition_code, print_operand_bitnum):
2275 Remove private tables and use tic80_value_to_symbol function.
2277 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2279 * d10v-dis.c (print_operand): Change address printing
2280 to correctly handle PC wrapping. Fixes PR11490.
2282 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2284 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2287 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2289 * mips-dis.c (print_insn_mips16): Set insn_info information.
2290 (print_mips16_insn_arg): Likewise.
2292 * mips-dis.c (print_insn_mips16): Better handling of an extend
2293 opcode followed by an instruction which can not be extended.
2295 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2297 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2298 coldfire moveb instruction to not allow an address register as
2299 destination. Although the documentation does not indicate that
2300 this is invalid, experiments uncovered unexpected behavior.
2301 Added a comment explaining the situation. Thanks to Andreas
2302 Schwab for pointing this out to me.
2304 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2306 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2307 entries are presorted so that entries with the same mnemonic are
2308 adjacent to each other in the table. Sort the entries for each
2309 instruction so that this is true.
2311 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2313 * m68k-dis.c: Include <libiberty.h>.
2314 (print_insn_m68k): Sort the opcode table on the most significant
2315 nibble of the opcode.
2317 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2319 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2320 "vsub", "vst", "xnor", and "xor" instructions.
2321 (V_a1): Renamed from V_a, msb of accumulator reg number.
2322 (V_a0): Add macro, lsb of accumulator reg number.
2324 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2326 * tic80-dis.c (print_insn_tic80): Broke excessively long
2327 function up into several smaller ones and arranged for
2328 the instruction printing function to be callable recursively
2329 to print vector instructions that have both a load and a
2330 math instruction packed into a single opcode.
2331 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2332 to explain why it comes after the other vector opcodes.
2334 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2336 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2337 move insns to handle immediate operands.
2339 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2341 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2342 fix operand mask in the "moveml" entries for the coldfire.
2344 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2346 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2347 New macros for building vector instruction opcodes.
2348 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2349 FMT_LI, which were unused. The field is now a flags field.
2350 Remove some opcodes that are possible, but illegal, such
2351 as long immediate instructions with doubles for immediate
2352 values. Add "vadd" and "vld" instructions.
2354 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2357 the order more logical. Move the shift alias instructions ("rotl",
2358 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2359 interspersed with the regular sr.x and sl.x instructions. Add
2360 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2361 "sub", "subu", "swcr", and "trap".
2363 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2365 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2366 (OFF_SL_PC): Renamed from OFF_SL.
2367 (OFF_SS_BR): New operand type for base relative operand.
2368 (OFF_SL_BR): New operand type for base relative operand.
2369 (REG_BASE): New operand type for base register operand.
2370 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2371 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2372 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2374 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2375 10 char field, padded with spaces on rhs, rather than a string
2376 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2377 than old TIC80_OPERAND_RELATIVE. Add support for new
2378 TIC80_OPERAND_BASEREL flag bit.
2380 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2382 * tic80-dis.c (print_insn_tic80): Print floating point operands
2384 * tic80-opc.c (SPFI): Add single precision floating point
2385 immediate operand type.
2386 (ROTATE): Add rotate operand type for shifts.
2387 (ENDMASK): Add for shifts.
2388 (n): Macro for the 'n' bit.
2389 (i): Macro for the 'i' bit.
2390 (PD): Macro for the 'PD' field.
2391 (P2): Macro for the 'P2' field.
2392 (P1): Macro for the 'P1' field.
2393 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2396 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2398 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2399 adding in current address for pc-relative operands.
2401 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2403 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2404 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2405 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2406 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2407 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2408 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2409 (REG_SCALED, LSI_SCALED): New operand types.
2410 (E): New macro for 'E' bit at bit 27.
2411 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2412 opcodes, including the various size flavors (b,h,w,d) for
2413 the direct load and store instructions.
2415 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2417 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2419 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2420 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2421 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2422 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2423 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2424 masks with "MASK_* & ~M_*" to get the M bit reset.
2425 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2427 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2429 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2430 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2431 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2433 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2434 CC, SICR, and LICR table entries.
2435 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2436 "bcnd", and "brcr" opcodes.
2438 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2440 * ppc-opc.c (powerpc_operands): Make comment match the
2441 actual fields (no shift field).
2442 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2443 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2444 partial implementation, work in progress.
2445 * tic80-opc.c (tic80_operands): Begin construction operands table.
2446 (tic80_opcodes): Continue populating opcodes table and start
2447 filling in the operand indices.
2448 (tic80_num_opcodes): Add this.
2450 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2452 * m68k-opc.c: Add #B case for moveq.
2454 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2456 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2457 before they are used.
2459 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2461 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2462 for "breakpoint" instruction.
2464 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2466 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2467 (dep): Use ALL_CFLAGS rather than CFLAGS.
2469 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2471 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2474 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2476 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2477 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2479 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2481 * mips16-opc.c: Add "abs".
2483 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2485 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2486 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2487 (disassembler): Add bfd_arch_tic80 support to set disassemble
2488 to print_insn_tic80.
2489 * tic80-dis.c (print_insn_tic80): Add stub.
2491 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2493 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2494 * configure: Regenerate with autoconf.
2495 * tic80-dis.c: Add file.
2496 * tic80-opc.c: Add file.
2498 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2500 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2502 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2504 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2505 (mn10200_opcodes): Use it for some logicals and btst insns.
2506 Add "break" and "trap" instructions.
2508 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2510 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2512 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2514 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2515 relative load or add now depends upon whether the instruction is
2518 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2520 * mn10200-dis.c: Finish writing disassembler.
2521 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2522 Fix mask for "jmp (an)".
2524 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2525 handle endianness issues for mn10300.
2527 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2529 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2531 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2532 instruction. Fix opcode field for "movb (imm24),dn".
2534 * mn10200-opc.c (mn10200_operands): Fix insertion position
2537 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2539 * mn10200-opc.c: Create mn10200 opcode table.
2540 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2541 but moving along nicely.
2543 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2545 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2547 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2549 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2550 specifiers for fmovem* instructions.
2552 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2554 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2556 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2558 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2561 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2563 * mn10300-opc.c: Add some comments explaining the various
2566 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2568 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2570 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2573 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2574 operand specifiers in fmovm* instructions.
2576 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2578 * ppc-opc.c (insert_li): Give an error if the offset has the two
2579 least significant bits set.
2581 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2583 * mips-dis.c (print_insn_mips16): Separate the instruction from
2584 the arguments with a tab, not a space.
2586 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2588 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2591 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2594 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2596 * configure: Rebuild with autoconf 2.12.
2598 Add support for mips16 (16 bit MIPS implementation):
2599 * mips16-opc.c: New file.
2600 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2601 (mips16_reg_names): New static array.
2602 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2603 after seeing a 16 bit symbol.
2604 (print_insn_little_mips): Likewise.
2605 (print_insn_mips16): New static function.
2606 (print_mips16_insn_arg): New static function.
2607 * mips-opc.c: Add jalx instruction.
2608 * Makefile.in (mips16-opc.o): New target.
2609 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2610 * configure: Rebuild.
2612 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2614 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2615 operand specifiers in *save, *restore and movem* instructions.
2617 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2620 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2621 register operands for immediate arithmetic, not, neg, negx, and
2622 set according to condition instructions.
2624 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2625 specifier of the effective-address operand in immediate forms of
2626 arithmetic instructions. The specifier for the immediate operand
2627 notes how and where the constant will be stored.
2629 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2631 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2634 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2637 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2639 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2641 * mn10300-dis.c (disassemble): Handle register lists.
2643 * mn10300-opc.c: Fix handling of register list operand for
2644 "call", "ret", and "rets" instructions.
2646 * mn10300-dis.c (disassemble): Print PC-relative and memory
2647 addresses symbolically if possible.
2648 * mn10300-opc.c: Distinguish between absolute memory addresses,
2649 pc-relative offsets & random immediates.
2651 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2653 (disassemble): Handle SPLIT and EXTENDED operands.
2655 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2657 * mn10300-dis.c: Rough cut at printing some operands.
2659 * mn10300-dis.c: Start working on disassembler support.
2660 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2662 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2664 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2666 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2668 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2670 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2672 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2673 register argument is calls and jmp instructions.
2675 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2677 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2678 getx operand. Fix opcode for mulqu imm,dn.
2680 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2682 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2683 in MN10300_OPERAND_SPLIT operands for how many bits
2684 appear in the basic insn word. Add IMM32_HIGH24,
2685 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2686 (mn10300_opcodes): Use new operands as needed.
2688 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2689 for bset, bclr, btst instructions.
2690 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2692 * mn10300-opc.c (mn10300_operands): Remove many redundant
2693 operands. Update opcode table as appropriate.
2694 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2695 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2697 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2699 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2700 operands (for indexed load/stores). Fix bitpos for DI
2701 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2702 few instructions that insert immediates/displacements in the
2703 middle of the instruction. Add IMM8E for 8 bit immediate in
2704 the extended part of an instruction.
2705 (mn10300_operands): Use new opcodes as appropriate.
2707 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2709 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2710 sequential so the assembler never parallelizes it with
2713 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2715 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2716 a data/address register that appears in register field 0
2717 and register field 1.
2718 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2720 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2722 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2723 standard disassembly.
2725 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2726 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2727 Recategorize PALcode instructions.
2729 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2731 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2733 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2735 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2736 there are no operand types.
2738 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2740 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2742 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2744 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2748 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2750 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2751 and sst.w instructions.
2753 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2756 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2758 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2761 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2763 * ppc-opc.c (PPCPWR2): Define.
2764 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2767 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2769 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2770 field for movhu instruction.
2772 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2773 cast value to "long" not "signed long" to keep hpux10
2776 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2778 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2781 * mn10300-opc.c (FMT*): Remove definitions.
2783 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2784 for shift-by-register opcodes.
2786 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2787 into [AD][MN][01] for encoding the position of the register
2790 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2792 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2793 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2795 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2797 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2798 Fix various typos. Add "PAREN" operand.
2799 (MEM, MEM2): Define.
2800 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2801 operands. Fix several typos.
2803 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2806 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2808 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2809 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2811 (mn10300_opcodes): Break opcode format out into its own field.
2812 Update many operand fields to deal with signed vs unsigned
2813 issues. Fix one or two typos in the "mov" instruction
2814 opcode, mask and/or operand fields.
2816 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2818 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2819 m68851 wasn't reset.
2821 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2823 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2824 all opcodes. Very rough cut at operands for all opcodes.
2826 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2829 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2831 * mn10200-opc.c, mn10300-opc.c: New files.
2832 * mn10200-dis.c, mn10300-dis.c: New files.
2833 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2834 * disassemble.c: Break mn10x00 support into 10200 and 10300
2836 * configure.in: Likewise.
2837 * configure: Rebuilt.
2839 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2841 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2843 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2845 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2847 * disassemble (ARCH_mn10x00): Define.
2848 (disassembler): Handle bfd_arch_mn10x00.
2849 * configure.in: Recognize bfd_mn10x00_arch.
2850 * configure: Rebuilt.
2852 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2854 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2855 accordingly. Don't declare functions using op_rtn.
2857 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2859 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2860 params to be more standard.
2861 * (disassemble): Print absolute addresses and symbolic names for
2862 branch and jump targets.
2863 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2865 * (v850_opcodes): Add breakpoint insn.
2867 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2869 * m68k-opc.c: Move the fmovemx data register cases before the
2870 other cases, so that they get recognized before the data register
2871 does gets treated as a degenerate register list.
2873 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2875 * mips-opc.c: Add a case for "div" and "divu" with two registers
2876 and a destination of $0.
2878 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2880 * mips-dis.c (print_insn_arg): Add prototype.
2881 (_print_insn_mips): Ditto.
2883 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2885 * mips-dis.c (print_insn_arg): Print condition code registers as
2888 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2890 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2892 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2894 * v850-dis.c (disassemble): Make static. Provide prototype.
2896 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2898 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2901 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2903 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2904 ']' characters into the output stream.
2905 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2906 Add "memop" field to all opcodes (for the disassembler).
2907 Reorder opcodes so that "nop" comes before "mov" and "jr"
2908 comes before "jarl".
2910 * v850-dis.c (print_insn_v850): Fix typo in last change.
2912 * v850-dis.c (print_insn_v850): Properly handle disassembling
2913 a two byte insn at the end of a memory region when the memory
2914 region's size is only two byte aligned.
2916 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2918 * v850-dis.c (v850_reg_names): Define.
2919 (v850_sreg_names, v850_cc_names): Likewise.
2920 (disassemble): Very rough cut at printing operands (unformatted).
2922 * v850-opc.c (BOP_MASK): Fix.
2923 (v850_opcodes): Fix mask for jarl and jr.
2925 * v850-dis.c: New file. Skeleton for disassembler support.
2926 * Makefile.in Remove v850 references, they're not needed here.
2927 * configure.in: Add v850-dis.o when building v850 toolchains.
2928 * configure: Rebuilt.
2929 * disassemble.c (disassembler): Call v850 disassembler.
2931 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2932 (insert_d8_6, extract_d8_6): New functions.
2933 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2934 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2936 (IF4A, IF4B): Use "D7" instead of "D7S".
2937 (IF4C, IF4D): Use "D8_7" instead of "D8".
2938 (IF4E, IF4F): New. Use "D8_6".
2939 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2940 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2942 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2943 (v850_operands): Change D16 to D16_15, use special insert/extract
2944 routines. New new D16 that uses the generic insert/extract code.
2945 (IF7A, IF7B): Use D16_15.
2946 (IF7C, IF7D): New. Use D16.
2947 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2949 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2950 message. Issue an error if the branch offset is odd.
2952 * v850-opc.c: Add notes about needing special insert/extract
2953 for all the load/store insns, except "ld.b" and "st.b".
2955 * v850-opc.c (insert_d22, extract_d22): New functions.
2956 (v850_operands): Use insert_d22 and extract_d22 for
2958 (insert_d9): Fix range check.
2960 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2962 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2963 and set bits field to D9 and D22 operands.
2965 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2967 * v850-opc.c (v850_operands): Define SR2 operand.
2968 (v850_opcodes): "ldsr" uses R1,SR2.
2970 * v850-opc.c (v850_opcodes): Fix opcode specs for
2971 sld.w, sst.b, sst.h, sst.w, and nop.
2973 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2975 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2976 end of the opcode table.
2978 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2980 * d10v-opc.c (pre_defined_registers): Added register pairs,
2981 "r0-r1", "r2-r3", etc.
2983 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2985 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2986 Create I16U for an unsigned 16bit mmediate operand.
2987 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2989 * v850-opc.c (v850_operands): Define EP operand.
2990 (IF4A, IF4B, IF4C, IF4D): Use EP.
2992 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2993 with immediate operand, "movhi". Tweak "ldsr".
2995 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2996 correct. Get sld.[bhw] and sst.[bhw] closer.
2998 * v850-opc.c (v850_operands): "not" is a two byte insn
3000 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3002 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3004 * v850-opc.c (two): Get order of words correct.
3006 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3008 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3009 register source and destination operands.
3010 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3012 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3013 same thinko in "trap" opcode.
3015 * v850-opc.c (v850_opcodes): Add initializer for size field
3018 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3019 Add D8 for 8-bit unsigned field in short load/store insns.
3020 (IF4A, IF4D): These both need two registers.
3021 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3022 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3023 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3024 for "ldsr" and "stsr".
3025 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3028 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3029 short store word (sst.w).
3031 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3033 * v850-opc.c (v850_operands): Added insert and extract fields,
3034 pointers to functions that handle unusual operand encodings.
3036 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3038 * v850-opc.c (v850_opcodes): Enable "trap".
3040 * v850-opc.c (v850_opcodes): Fix order of displacement
3041 and register for "set1", "clr1", "not1", and "tst1".
3043 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3045 * v850-opc.c (v850_operands): Add "B3" support.
3046 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3049 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3051 * v850-opc.c: Close unterminated comment.
3053 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3055 * v850-opc.c (v850_operands): Add flags field.
3056 (v850_opcodes): add move opcodes.
3058 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3060 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3061 * configure: (bfd_v850v_arch) Add new case.
3062 * configure.in: (bfd_v850_arch) Add new case.
3063 * v850-opc.c: New file.
3065 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3067 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3069 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3071 * d10v-opc.c: Add additional information to the opcode
3072 table to help determinine which instructions can be done
3075 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3077 * mpw-make.sed: Update editing of include pathnames to be
3080 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3082 * arm-opc.h: Added "bx" instruction definition.
3084 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3086 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3088 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3090 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3092 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3094 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3096 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3098 * makefile.vms: Update for alpha-opc changes.
3100 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3102 * i386-dis.c (print_insn_i386): Actually return the correct value.
3103 (ONE, OP_ONE): #ifdef out; not used.
3105 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3107 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3108 Changed subi operand type to treat 0 as 16.
3110 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3112 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3115 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3117 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3118 memory transfer instructions. Add new format string entries %h and %s.
3119 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3122 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3124 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3125 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3127 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3129 * alpha-dis.c (print_insn_alpha_osf): Remove.
3130 (print_insn_alpha_vms): Remove.
3131 (print_insn_alpha): Make globally visible. Chose the register
3132 names based on info->flavour.
3133 * disassemble.c: Always return print_insn_alpha for the alpha.
3135 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3137 * d10v-dis.c (dis_long): Handle unknown opcodes.
3139 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3141 * d10v-opc.c: Changes to support signed and unsigned numbers.
3142 All instructions with the same name that have long and short forms
3143 now end in ".l" or ".s". Divs added.
3144 * d10v-dis.c: Changes to support signed and unsigned numbers.
3146 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3148 * d10v-dis.c: Change all functions to use info->print_address_func.
3150 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3152 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3153 move ccr/sr insns more strict so that the disassembler only
3154 selects them when the addressing mode is data register.
3156 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3157 * d10v-opc.c (pre_defined_registers): Declare.
3158 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3159 to pick a better name for the registers.
3161 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3163 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3164 operands for fexpand and fpmerge. From Christian Kuehnke
3165 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3167 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3169 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3170 print routine. Take new regnames and cpumask arguments.
3171 Kill the environment variable nonsense.
3172 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3173 (print_insn_alpha_vms): New function. Do VMS style regnames.
3174 * disassemble.c (disassembler): Test bfd flavour to pick
3175 between OSF and VMS routines. Default to OSF.
3177 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3179 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3180 * configure: Rebuild.
3181 * Makefile.in (install): Use @INSTALL_SHLIB@.
3183 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3185 * configure: (bfd_d10v_arch) Add new case.
3186 * configure.in: (bfd_d10v_arch) Add new case.
3187 * d10v-dis.c: New file.
3188 * d10v-opc.c: New file.
3189 * disassemble.c (disassembler) Add entry for d10v.
3191 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3193 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3194 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3196 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3198 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3199 distinguish between variants of the instruction set.
3200 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3201 distinguish between variants of the instruction set.
3203 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3205 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3206 the 8086 instruction set.
3207 * i386-dis.c: General cleanups. Make most things static. Add
3208 prototypes. Get rid of static variables aflags and dflags. Pass
3209 them as args (to almost everything).
3211 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3213 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3215 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3217 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3218 if the next arg is marked with SRC_IN_DST. Gross.
3220 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3221 we're looking for and find EXR.
3223 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3224 if we're looking for KBIT and we don't find it.
3226 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3229 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3230 3bit immediate operands.
3232 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3234 * Released binutils 2.7.
3236 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3237 <kkaempf@progis.ac-net.de>.
3239 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3241 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3243 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3245 * sparc-dis.c (print_insn_sparclite): New routine to print
3246 sparclite instructions.
3248 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3250 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3252 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3254 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3255 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3256 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3258 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3260 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3261 Use autoconf-set values.
3262 (docdir, oldincludedir): Removed.
3263 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3265 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3267 * alpha-opc.c: New file.
3268 * alpha-opc.h: Remove.
3269 * alpha-dis.c: Complete rewrite to use new opcode table.
3270 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3271 * configure: Rebuild with autoconf 2.10.
3272 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3273 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3275 (alpha-opc.o): New target.
3277 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3279 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3280 Set imm_added_to_rs1 even if the source and destination register
3283 * sparc-opc.c: Add some two operand forms of the wr instruction.
3285 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3287 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3290 * disassemble.c (disassembler): Handle H8/S.
3291 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3293 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3295 * sparc-opc.c: Add beq/teq as aliases for be/te.
3297 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3298 <sergei@msil.sps.mot.com>.
3300 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3302 * makefile.vms: New file.
3304 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3306 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3308 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3311 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3313 * i386-dis.c (OP_OFF): Call append_prefix.
3315 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3317 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3318 unsigned long to silence a warning from the Solaris PowerPC
3321 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3323 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3325 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3327 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3329 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3330 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3331 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3332 cpush, cpusha, cpull sparclet insns.
3334 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3336 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3338 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3340 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3341 Set F_FLOAT on other floating point instructions.
3343 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3345 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3347 (powerpc_opcodes): Add 860/821 specific SPRs.
3349 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * configure.in: Permit --enable-shared to specify a list of
3352 directories. Set and substitute BFD_PICLIST.
3353 * configure: Rebuild.
3354 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3355 uses. Set to @BFD_PICLIST@.
3357 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3359 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3360 not "abs", which may be needed for the absolute in something
3361 like btst #0,@10:8. Print L_3 immediates separately from other
3362 immediates. Change ABSMOV reference to ABS8MEM.
3364 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3366 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3367 (current_arch_mask): New static global.
3368 (compute_arch_mask): New static function.
3369 (print_insn_sparc): Delete sparc_v9_p. New static local
3370 current_mach. Resort opcode table if current_mach changes.
3371 Generalize "insn not supported" test.
3372 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3373 Delete test for v9/!v9.
3374 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3376 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3377 (brfcx): Renamed to FBRX.
3378 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3379 coprocessor mnemonics are not supported on the sparclet).
3380 (condf): Renamed to CONDF.
3381 (SLCBCC2): Delete F_ALIAS flag.
3383 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3385 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3386 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3388 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3390 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3391 that the shared library version number is set correctly.
3393 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3395 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3396 Miles Bader <miles@gnu.ai.mit.edu>.
3397 * configure: Rebuild.
3399 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3401 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3404 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3406 * configure: Rebuild with autoconf 2.8.
3408 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3410 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3411 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3413 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3415 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3416 since they appear as targets in Makefile.in.
3417 * configure: Rebuild.
3419 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3421 * mpw-make.sed: Edit out shared library support bits.
3423 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3425 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3426 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3427 (sparc_opcodes): Add sparclet insns.
3428 (sparclet_cpreg_table): New static local.
3429 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3430 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3432 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3434 * i386-dis.c (index16): New static variable.
3435 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3437 (OP_indirE): Return result of OP_E.
3438 (OP_E): Check for 16 bit addressing mode, and disassemble
3439 correctly. Optimised 32 bit case a little. Don't print
3440 "(base,index,scale)" when sib specifies only an offset.
3442 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3444 * configure.in: Set and substitute SHLIB_DEP.
3445 * configure: Rebuild.
3446 * Makefile.in (SHLIB_DEP): New variable.
3447 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3448 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3449 COMMON_SHLIB, add them to piclist with appropriate modifications.
3450 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3451 here: just use piclist.
3453 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3455 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3456 (print_insn_sparc): Rewrite v9/not-v9 tests.
3457 (compare_opcodes): Likewise.
3458 * sparc-opc.c (MASK_<ARCH>): Define.
3459 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3460 (sparclet,v6notv9): Define.
3461 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3462 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3464 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * configure.in: Call AC_PROG_CC before configure.host.
3467 * configure: Rebuild.
3469 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3471 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3473 * i386-dis.c (onebyte_has_modrm): New static array.
3474 (twobyte_has_modrm): New static array.
3475 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3477 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3479 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3482 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3484 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3487 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3489 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3490 m68010up, not just m68020up | cpu32.
3492 * Makefile.in (SONAME): New variable.
3493 ($(SHLINK)): Make a link to the transformed name, as well.
3494 (stamp-tshlink): New target.
3495 (install): Skip stamp-tshlink during install.
3497 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3499 * configure.in: Call AC_ARG_PROGRAM.
3500 * configure: Rebuild.
3501 * Makefile.in (program_transform_name): New variable.
3502 (install): Transform library name before installing it.
3504 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3506 * i960-dis.c (mem): Add HX dcinva instruction.
3508 Support for building as a shared library, based on patches from
3509 Alan Modra <alan@spri.levels.unisa.edu.au>:
3510 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3511 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3512 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3513 * configure: Rebuild.
3514 * Makefile.in (ALLLIBS): New variable.
3515 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3516 (COMMON_SHLIB, SHLINK): New variables.
3517 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3518 (STAGESTUFF): Remove variable.
3519 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3520 (stamp-piclist, piclist): New targets.
3521 ($(SHLIB), $(SHLINK)): New targets.
3522 ($(OFILES)): Depend upon stamp-picdir.
3523 (disassemble.o): Build twice if PICFLAG is set.
3524 (MOSTLYCLEAN): Add pic/*.o.
3525 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3526 (distclean): Remove pic and stamp-picdir.
3527 (install): Install shared libraries.
3528 (stamp-picdir): New target.
3530 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3532 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3533 Print unknown instruction as "unknown", rather than in hex.
3535 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3537 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3539 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3541 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3543 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3545 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3546 when necessary. From Ulrich Drepper
3547 <drepper@myware.rz.uni-karlsruhe.de>.
3549 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3551 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3552 sparc_num_opcodes. Update architecture enum values.
3553 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3554 (sparc_opcode_lookup_arch): New function.
3555 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3556 (sparc_opcodes): Add v9a shutdown insn.
3558 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3560 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3561 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3563 (print_insn_sparc64): Deleted.
3564 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3567 * sparc-opc.c (architecture_pname): Add v9a.
3569 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3571 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3572 incorrectly defined as 0x16 when it should be 0x15.
3573 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3574 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3575 excb (exception barrier) which is defined in the Alpha
3576 Architecture Handbook version 2.
3577 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3578 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3579 disassembled as or, for example.
3581 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3584 (_print_insn_mips): Change i from int to unsigned int.
3586 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3588 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3589 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3591 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3593 * i386-dis.c: Added Pentium Pro instructions.
3595 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3597 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3600 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3602 * sh-opc.h (sh_nibble_type): Added REG_B.
3603 (sh_arg_type): Added A_REG_B.
3604 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3606 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3608 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3610 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3612 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3614 * Makefile.in (distclean): Remove stamp-h. From Ronald
3615 F. Guilmette <rfg@monkeys.com>.
3617 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3619 From David Mosberger-Tang <davidm@azstarnet.com>:
3620 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3623 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3625 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3626 (sh_table): Added many SH3 opcodes.
3627 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3629 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3631 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3632 (subco,subco.): Mark this PPC, not PPCCOM.
3634 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3636 * configure: Rebuild with autoconf 2.7.
3638 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3640 * configure: Rebuild with autoconf 2.6.
3642 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3644 * configure.in: Sort list of architectures. Accept but do nothing
3645 for alliant, convex, pyramid, romp, and tahoe.
3647 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3649 * a29k-dis.c (print_special): Change num to unsigned int.
3651 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3653 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3656 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3658 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3659 * configure: Rebuilt.
3661 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3663 * configure.in: Add case for bfd_i860_arch.
3664 * configure: Rebuild.
3666 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3668 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3669 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3670 (NEXTDOUBLE): Likewise.
3671 (print_insn_m68k): Don't match fmoveml if there is more than one
3672 register in the list.
3673 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3675 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3677 * m68k-opc.c: Use #W rather than #w.
3678 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3680 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3682 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3683 and likewise for all the dbxx opcodes.
3685 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3687 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3689 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3691 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3692 the VR4100 specific instructions to the mips_opcodes structure.
3694 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3696 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3697 ugly Metrowerks bug in CW6, is fixed in CW7.
3699 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3701 * ppc-opc.c (whole file): Add flags for common/any support.
3703 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3705 * Makefile.in (BISON): Remove macro.
3706 (FLAGS_TO_PASS): Remove BISON.
3708 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3710 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3712 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3713 instructions that take no args by looking at the match mask.
3714 (print_insn_arg): Always print "%" before register names.
3715 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3716 [case '_']: Don't print "@#" before address.
3717 [case 'J']: Use "%s" as format string, not register name.
3718 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3720 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3722 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3725 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3727 From David Mosberger-Tang <davidm@azstarnet.com>
3729 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3730 (alpha_insn_set): added definitions for VAX floating point
3731 instructions (Unix compilers don't generate these, but handcoded
3732 assembly might still use them).
3734 * alpha-dis.c (print_insn_alpha): added support for disassembling
3735 the miscellaneous instructions in the Alpha instruction set.
3737 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3739 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3740 no longer create sysdep.h, sed ppc-opc.c to work around a
3741 serious Metrowerks C bug.
3742 * mpw-make.in: Remove.
3743 * mpw-make.sed: New file, used by mpw-configure to edit
3744 Makefile.in into an MPW makefile.
3746 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3748 * Makefile.in (maintainer-clean): New synonym for realclean.
3750 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3752 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3753 which use '0', '1', and '2' instead. Specify the proper size for
3754 a pmove immediate operand. Correct the pmovefd patterns to be
3755 moves to a register, not from a register.
3756 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3758 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3760 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3761 %psr, %wim, %tbr as F_NOTV9.
3763 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * Makefile.in (Makefile): Just rebuild Makefile when running
3767 (config.h, stamp-h): New targets.
3768 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3769 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3770 rebuilding config.h.
3771 * configure: Rebuild.
3773 * mips-opc.c: Change unaligned loads and stores with "t,A"
3774 operands to use "t,A(b)".
3776 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3778 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3780 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3782 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3783 until 3 instead of until 2.
3785 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3787 * Makefile.in (ALL_CFLAGS): Define.
3788 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3789 (MOSTLYCLEAN): Add config.log.
3790 (distclean): Don't remove config.log.
3791 * configure.in: Substitute HDEFINES.
3792 * configure: Rebuild.
3794 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3796 * sh-opc.h (sh_arg_type): Add F_FR0.
3797 (sh_table, case fmac): Add F_FR0 as first argument.
3799 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3801 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3803 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3805 * sparc-dis.c: Remove all references to NO_V9.
3807 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3809 * aclocal.m4: Just include ../bfd/aclocal.m4.
3810 * configure: Rebuild.
3812 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3814 * sparc-dis.c (X_DISP19): Define.
3815 (print_insn, case 'G'): Use it.
3816 (print_insn, case 'L'): Sign extend displacement.
3818 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3820 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3821 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3822 host_makefile_frag or frags.
3823 * aclocal.m4: New file.
3824 * configure: Rebuild.
3825 * Makefile.in (INSTALL): Set to @INSTALL@.
3826 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3827 (INSTALL_DATA): Set to @INSTALL_DATA@.
3829 (AR_FLAGS): Set to rc rather than qc.
3830 (CC): Define as @CC@.
3831 (CFLAGS): Set to @CFLAGS@.
3832 (@host_makefile_frag@): Remove.
3833 (config.status): Remove dependency upon @frags@.
3835 * configure.in: ../bfd/config.bfd now just sets shell variables.
3836 Use them rather than looking through target Makefile fragments.
3837 * configure: Rebuild.
3839 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3841 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3843 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3845 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3846 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3849 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3850 (lookup_{name,value}): New functions.
3851 (prefetch_table): New static local.
3852 (sparc_{encode,decode}_prefetch): New functions.
3853 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3855 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3857 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3860 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3862 * sh-dis.c: Correct comment on first line of file.
3864 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3866 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3868 * sparc-opc.c (asi, membar): New static locals.
3869 (sparc_{encode,decode}_{asi,membar}): New functions.
3870 (sparc_opcodes, membar insn): Fix.
3871 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3872 Support decoding of membar masks.
3875 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3877 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3879 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3881 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3882 and likewise for the other branches. Add bhs as an alias for bcc,
3883 and likewise for the size variants. Add dbhs as an alias for
3886 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3888 * sh-opc.h (FP sts instructions): Update to match reality.
3890 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3892 * m68k-dis.c: (fpcr_names): Add % before all register names.
3893 (reg_names): Likewise.
3894 (print_insn_arg): Don't explicitly print % before register names.
3895 Add % before register names in static array names. In case 'r',
3896 print data registers as `@(Dn)', not `Dn@'. When printing a
3897 memory address, don't print @# before it.
3898 (print_indexed): Change base_disp and outer_disp from int to
3899 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3900 syntax. Sign extend 8 byte displacement correctly.
3901 (print_base): Print using MIT syntax. Print zpc when appropriate.
3902 Change parameter disp from int to bfd_vma.
3904 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3907 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3909 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3910 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3911 * sh-opc.h (sh_arg_type): Add new operand types.
3912 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3914 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3916 * Makefile.in (distclean): Remove generated file config.h.
3918 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3920 * Makefile.in (distclean): Remove generated file config.h.
3922 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3924 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3926 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3928 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3929 rather than numopcodes. Use m68k_opcodes rather than removed
3930 opcode function. Don't check F_ALIAS.
3931 (print_insn_arg): Change first parameter to be const char *.
3932 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3933 (m68k-opc.o): New target.
3934 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3935 * configure: Rebuild.
3937 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3939 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3940 (opcode_bits, opcode_hash_table): New variables.
3941 (opcodes_initialized): Renamed from opcodes_sorted.
3942 (build_hash_table): New function.
3943 (is_delayed_branch): Use hash table.
3944 (print_insn): Renamed from print_insn_sparc, made static.
3945 Build and use hash table. If !sparc64, ignore sparc64 insns,
3946 and vice-versa if sparc64.
3947 (print_insn_sparc, print_insn_sparc64): New functions.
3948 (compare_opcodes): Move sparc64 opcodes to end.
3949 Print commutative insns with constant second.
3950 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3952 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3954 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3955 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3956 avoids printing a delay slot in a delay slot.
3957 * sh-opc.h (sh_table): Fully bracket last entry.
3959 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3961 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3963 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3965 * configure.in: Get host_makefile_frag from ${srcdir}.
3967 * configure.in: Autoconfiscated. Check for string[s].h. Create
3968 config.h from config.in. Don't set up sysdep.h link.
3969 * sysdep.h: New file.
3970 * configure, config.in: New files, generated from configure.in.
3971 * Makefile.in: Updated to be processed autoconf-style.
3972 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3973 (Makefile): Depend on config.status.
3974 (config.status): New rule.
3975 * configure.bat: Update Makefile substitutions.
3977 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3979 * mips-opc.c (L1): Define.
3980 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3981 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3984 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3986 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3987 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3988 have multiple add units but only a single logical unit.
3990 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3991 shifted by 18, without any insertion or extraction function.
3992 (insert_cr, extract_cr): Remove.
3994 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3996 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3999 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4001 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4002 * sh-opc.h: Add copyright.
4004 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4006 * Makefile.in (crunch-m68k): Delete extra target accidentally
4007 checked in a while ago.
4009 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4011 * sh-opc.h (sh_table): Add SH3 support.
4013 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4015 * sh-opc.h: Added bsrf and braf.
4017 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4019 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4020 bogus [ls]fm{ea,fd} patterns.
4022 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4023 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4024 initialize it from memory. Make function static.
4025 (print_insn_{big,little}_arm): New functions.
4026 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4027 the correct endianness.
4029 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4031 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4034 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4036 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4037 17th, so that it builds again using GCC as the compiler.
4039 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4041 * mips-dis.c (print_insn_little_mips): Cast return value from
4042 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4043 expects an unsigned long, and that might be fewer words of
4044 argument storage (e.g., if bfd_vma is long long on a 32-bit
4046 (print_insn_big_mips): Likewise with bfd_getb32 value.
4047 (_print_insn_mips): Now static.
4049 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4051 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4052 gcc memory hog problem with initializer is fixed.
4054 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4056 Merge in support for Mac MPW as a host.
4057 (Old change descriptions retained for informational value.)
4059 * mpw-config.in (archname): Compute from the config.
4060 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4062 * mpw-config.in (target_arch): Compute from canonical target.
4063 (m68k, mips, powerpc, sparc): Add architectures.
4064 * mpw-make.in (disassemble.c.o): Add.
4065 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4067 * mpw-config.in (BFD_MACHINES): Set to a default value.
4068 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4070 * mpw-make.in (CSEARCH): Add extra-include to search path.
4072 * mpw-config.in (varargs.h): Don't create.
4073 (sysdep.h): Create using forward-include.
4074 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4076 * mpw-config.in: New file, MPW version of configure.in.
4077 * mpw-make.in: New file, MPW version of Makefile.in.
4079 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4081 * alpha-dis.c (print_insn_alpha): Put empty statement after
4084 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4086 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4087 (low_sign_extend): Likewise.
4088 (get_field): Delete unused function.
4089 (set_field, deposit_14, deposit_21): Likewise.
4091 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4093 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4096 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4098 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4100 * alpha-opc.h (OSF_ASMCODE): define
4101 print pal-code names as defined in App C of the
4102 Alpha Architecture Reference Manual
4104 * alpha-dis.c: cleaned up output
4105 print stylized code forms as defined in App A.4.3 of the
4106 Alpha Architecture Reference Manual
4108 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4110 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4112 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4115 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4117 * m68k-dis.c (opcode): New function. Returns address of opcode
4118 table entry given index, even if the opcode table was split to
4119 work around gcc bugs.
4120 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4122 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4123 (reg_names): Now const.
4124 (print_insn_arg): Arrays cacheFieldName and names now const.
4125 (print_indexed): Array scales now const.
4127 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4129 * ppc-opc.c: Sort recently added instructions by minor opcode
4130 number within major opcode number.
4132 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4134 * hppa-dis.c: Include libhppa.h.
4136 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4138 * mips-opc.c: Change dli to use M_DLI, and add dla.
4140 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4142 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4144 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4146 * mips-opc.c: Add r4650 mul instruction.
4148 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4150 * mips-opc.c: Add uld and usd macros for unaligned double load and
4153 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4155 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4156 mfdcr, mtdcr, icbt, iccci.
4158 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4160 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4161 signed char fields to shorts, more portable.
4163 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4165 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4166 char fields as signed chars, since they may have negative values.
4168 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4170 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4171 (mycroft@netbsd.org).
4173 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4175 From "Logg, Ed" <elogg@ea.com>:
4176 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4177 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4180 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4182 * ppc-opc.c: Changes based on patch from David Edelsohn
4183 <edelsohn@mhpcc.edu>.
4184 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4187 (insert_tbr): New static function.
4188 (extract_tbr): New static function.
4189 (XFXFXM_MASK, XFXM): Define.
4190 (XSPRBAT_MASK, XSPRG_MASK): Define.
4191 (powerpc_opcodes): Add instructions to access special registers by
4192 name. Add mtcr and mftbu.
4194 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4196 * mips-opc.c (P3): Define.
4197 (mips_opcodes): Add mad and madu.
4199 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4201 * configure.in: Add W65 support.
4202 * disassemble.c: Likewise.
4203 * w65-opc.h, w65-dis.c: New files.
4205 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4207 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4210 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4212 * mips-opc.c: Add dli as a synonym for li.
4214 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4216 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4217 print something for reserved opcode values, even if it won't
4220 * mips-dis.c (_print_insn_mips): When initializing, shift right
4221 and mask, to avoid sign extension problems on the Alpha.
4223 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4226 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4228 * sh-opc.h (mov.l gbr): Get direction right.
4229 * sh-dis.c (print_insn_shx): New function.
4230 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4231 print opcodes with right byte order.
4233 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4235 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4236 to avoid conflicts with getopt.
4238 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4240 * hppa-dis.c (print_insn_hppa): Read the instruction using
4241 bfd_getb32, so that it works on a little endian or 64 bit host.
4242 Remove unused local variable op.
4244 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4246 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4247 addu does not work correctly if -mips3.
4249 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4251 * a29k-dis.c (print_special): Add special register names defined
4252 on 29030, 29040 and 29050.
4253 (print_insn): Handle new operand type 'I'.
4255 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4257 * Makefile.in (INSTALL): Use top level install.sh script.
4259 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4261 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4262 that it works on a little endian host.
4264 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4266 * configure.in: Use ${config_shell} when running config.bfd.
4268 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4270 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4272 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4274 * a29k-dis.c (print_insn): Print the opcode.
4276 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4278 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4280 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4282 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4284 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4286 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4287 which store a value into memory.
4289 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4291 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4292 * arm-dis.c, arm-opc.h: New files.
4294 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4296 * Makefile.in (ns32k-dis.o): Add dependency.
4297 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4298 string, not as array of chars.
4300 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4302 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4304 * sparc-opc.c: Added sparclite extended FP operations, and
4305 versions of v9 impdep* instructions permitting specification of
4308 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4310 * i960-dis.c (reg_names): Now const.
4311 (struct sparse_tabent): New type, copied from array type in mem
4313 (ctrl): Local static array ctrl_tab now const.
4314 (cobr): Local static array cobr_tab now const.
4315 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4316 static variable mem_tab no longer explicitly initialized. Changed
4317 mem_init to const array of struct sparse_tabent.
4318 (reg): Local static variable reg_tab no longer explicitly
4319 initialized. Changed reg_init to const array of struct
4321 (ea): Local static array scale_tab now const.
4323 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4326 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4328 * configure.bat: the disassember needs to be enabled for
4329 "objdump -d" to work in djgpp.
4331 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4333 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4334 (invalid_float): Enabled general version, doesn't require running
4335 on ns32k host. Changed to take char* argument, and test for
4336 explicitly specified sizes, instead of using sizeof() on host CPU
4338 (INVALID_FLOAT): Cast first argument.
4339 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4340 list_P032, list_M032): Now const.
4341 (optlist, list_search): Made appropriate arguments now point to
4343 (print_insn_arg): Changed static array of one-character-string
4344 pointers into a static const array of characters; fixed sprintf
4345 statement accordingly.
4347 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4349 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4350 from distribution. A ns32k-dis.c from a previous distribution has
4351 been brought up to date and supports the new interface.
4353 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4355 * configure.in: add bfd_ns32k_arch target support.
4357 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4358 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4360 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4362 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4365 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4367 * h8300-dis.c, mips-dis.c: Don't use true and false.
4369 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4371 * configure.in: Change --with-targets to --enable-targets.
4373 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4375 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4376 opcodes to the first instruction with that opcode, to speed
4377 disassembly of large files. From ralphc@pyramid.com (Ralph
4380 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4382 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4384 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4386 * configure.bat: update to latest makefile.in
4388 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4390 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4391 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4392 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4393 slot insn is in a delay slot.
4394 * z8k-opc.h: (resflg): Fix patterns.
4395 * h8500-opc.h Fix CR insn patterns.
4397 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4399 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4400 "cmpl" before POWER versions, so that gas -many uses them.
4402 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4404 * disassemble.c: New file.
4405 * Makefile.in (OFILES): Add disassemble.o.
4406 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4407 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4408 binutils/configure.in.
4410 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4411 opcode being examined.
4413 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4415 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4416 (insert_ral, insert_ram, insert_ras): New functions.
4417 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4418 RAS for store with update.
4420 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4422 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4423 (edelsohn@npac.syr.edu).
4425 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4427 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4430 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4432 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4434 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4436 * ppc-opc.c (powerpc_operands): The signedp field has been
4437 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4438 instead. Add new operand SISIGNOPT.
4439 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4440 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4441 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4444 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4446 * i386-dis.c (struct private): Renamed to dis_private. `private'
4447 is a reserved word for dynix cc.
4449 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4451 * configure.in: Change error message to refer to bfd/config.bfd
4452 rather than bfd/configure.in.
4454 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4456 * ppc-opc.c: Define POWER2 as short alias flag.
4457 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4460 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4462 * i960-dis.c (print_insn_i960): Don't read a second word for
4463 opcodes 0, 1, 2 and 3.
4465 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4467 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4469 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4471 * m68881-ext.c: Removed; no longer used.
4472 * Makefile.in: Changed accordingly.
4474 * m68k-dis.c (ext_format_68881): Don't declare.
4475 (print_insn_m68k): If an instruction uses place 'i', it uses at
4476 least four fixed bytes.
4477 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4478 extended float, convert to double using floatformat_to_double, not
4479 ieee_extended_to_double, and fetch the data before converting it.
4481 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4483 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4484 davidj@ICSI.Berkeley.EDU (David Johnson).
4486 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4488 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4489 PowerPC uses bdnz[l][a].
4491 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4493 * dis-buf.c, i386-dis.c: Include sysdep.h.
4495 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4497 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4499 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4500 by Motorola PowerPC 601 with PPC_OPCODE_601.
4501 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4502 Disassemble Motorola PowerPC 601 instructions as well as normal
4503 PowerPC instructions.
4505 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4507 * i960-dis.c (reg, mem): Just use a static array instead of
4510 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4512 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4513 condition name index if this is for a negated condition.
4515 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4516 Floating point format for 'H' operand is backwards from normal
4517 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4518 operands (fmpyadd and fmpysub), handle bizarre register
4519 translation correctly for single precision format.
4521 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4522 or 'I' operands if the next format specifier is 'M' (fcmp
4523 condition completer).
4525 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4528 single number giving a bitmask for the MB and ME fields of an M
4529 form instruction. Change NB to accept 32, and turn it into 0;
4530 also turn 0 into 32 when disassembling. Seperated SH from NB.
4531 (insert_mbe, extract_mbe): New functions.
4532 (insert_nb, extract_nb): New functions.
4533 (SC_MASK): Mask out SA and LK bits.
4534 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4535 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4536 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4537 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4538 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4539 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4540 (powerpc_macros): Define table of macro definitions.
4541 (powerpc_num_macros): Define.
4543 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4544 if PPC_OPERAND_NEXT is set.
4546 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4548 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4549 char. Retrieve contents using bfd_getl32 instead of shifting.
4551 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4553 * ppc-opc.c: New file. Opcode table for PowerPC, including
4554 opcodes for POWER (RS/6000).
4555 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4556 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4557 (CFILES): Add ppc-dis.c.
4558 (ppc-dis.o, ppc-opc.o): New targets.
4559 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4561 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4563 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4564 No space before 'u', 'f', or 'N'.
4566 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4568 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4569 farther than we should.
4571 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4573 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4575 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4577 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4579 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4580 needs it, to prevent reading past the end of a section.
4582 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4585 Removed t,A case for la; always use t,A(b) case.
4587 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4589 From Ted Lemen <mellon@pepper.ncd.com>
4590 * mips-dis.c (print_insn_arg): Handle 'k'.
4591 * mips-opc.c: Make cache use k, not t.
4593 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4595 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4596 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4597 FLOAT_FORMAT_CODE to put out floating point register names.
4599 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4601 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4603 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4605 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4607 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4609 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4610 larger than 32. Moved dsxx32 variants first for disassembler.
4612 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4614 * z8kgen.c, z8k-opc.h: Add full lda information.
4616 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4618 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4619 movb instructions. Any necessary space will be emitted by
4620 the code to handle nullification completers.
4622 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4626 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4628 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4629 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4631 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4633 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4635 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4637 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4638 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4640 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4642 * m88k-dis.c (m88kdis): comment change. Remove space after
4644 (printop): handle new arg types DEC and XREG for m88110.
4646 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4648 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4649 type for absolute branch addresses. Delete special
4650 "ble" and "be" code in 'W' operand code.
4652 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4654 * mips-opc.c: Set hazard information correctly for branch
4655 likely instructions.
4657 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4659 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4660 info->fprintf_func for printing and info->print_address_func for
4663 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4667 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4669 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4670 Corrected second case of "b" for disassembler.
4672 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4674 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4675 to BFD swapping routines to correspond to BFD name changes.
4677 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4679 * mips-opc.c: Change div machine instruction to be z,s,t rather
4680 than s,t. Change div macro to be d,v,t rather than d,s,t.
4681 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4682 rem and remu which generates only the corresponding div
4683 instruction. This is for compatibility with the MIPS assembler,
4684 which only generates the simple machine instruction when an
4685 explicit destination of $0 is used.
4686 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4688 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4691 WR_31 hazard for bal, bgezal, bltzal.
4693 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4695 * hppa-dis.c (print_insn_hppa): Use print function
4696 from within the disassemble_info, not fprintf_filtered.
4698 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4700 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4701 Law, law@cs.utah.edu.)
4703 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4705 * mips-opc.c ("absu"): Removed.
4708 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4710 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4711 Changed hazard information to distinguish between memory load
4712 delays and coprocessor load delays.
4714 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4718 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4720 * configure.in: Don't pass cpu to config.bfd.
4722 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4724 * m88k-dis.c (m88kdis): Make class unsigned.
4726 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4728 * alpha-dis.c (print_insn_alpha): One branch format case was
4729 missing the instruction name.
4731 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4733 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4734 Add the arch-specific auxiliary files.
4735 (OFILES): Remove the arch-specific auxiliary files
4736 and use BFD_MACHINES instead of DIS_LIBS.
4737 * configure.in: Set BFD_MACHINES based on --with-targets option.
4739 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4744 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4746 * sparc-opc.c: Change CONST to const to deal with gcc
4747 -Dconst=__const -traditional.
4749 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4751 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4752 coprocessor instructions out of #if 0, and made them use new
4755 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4757 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4759 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4761 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4762 instruction, for use by the disassembler.
4764 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4765 hand-coded sign extensions that depended on 32-bit host ints.
4766 FIXME, we still depend on big-endian host bitfield ordering.
4767 (sparc_print_insn): Set the insn_info_valid field, and the
4768 other fields that describe the instruction being printed.
4770 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4772 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4773 `jmp' instead of just one of them.
4775 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4777 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4778 (fput_fp_reg_r): Renamed from fput_reg_r.
4779 (fput_fp_reg): New function.
4780 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4782 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4784 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4786 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4788 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4790 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4791 don't output a space.
4793 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4795 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4797 * mips-opc.c: New file, containing opcode table from
4798 ../include/opcode/mips.h.
4799 * Makefile.in: Add it.
4801 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * m88k-dis.c: New file, moved in from gdb and changed to use the
4804 new dis-asm.h disassembler interface.
4805 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4806 (m88k-dis.o): New target.
4808 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4810 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4811 argument string const char * to correspond to opcode/mips.h.
4813 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4815 * mips-dis.c: Updated to account for name changes in new version
4817 * Makefile.in: Added header file dependencies.
4819 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4821 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4823 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4825 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4826 extend, rather than shifts.
4828 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4830 * Makefile.in: Undo 15 June change.
4832 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4834 * m68k-dis.c (print_insn_arg): Change return value to byte count
4836 * m68k-dis.c: Re-write to detect invalid operands before
4837 printing anything, so we can handle this the same way we
4838 handle invalid opcodes.
4840 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4842 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4844 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4846 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4849 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4851 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4853 * configure.in: Do make sysdep.h link.
4854 * Makefile.in: Search ../include. Don't search ../bfd.
4856 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4858 Changes from Jeff Law, law@cs.utah.edu:
4859 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4860 Do not print a space before the completers specified by
4863 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4865 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4866 defined, since gdb has been fixed.
4868 Changes from Jeff Law, law@cs.utah.edu:
4869 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4870 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4871 be a *disassemble_info, not a *FILE.
4872 * hppa-dis.c: Support 'd', '!', and 'a'.
4873 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4874 * hppa-dis.c: Delete cases which are no longer needed.
4876 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4878 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4880 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4882 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4885 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4887 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4888 * configure.in: No longer need to configure to get sysdep.h.
4890 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4892 * Patches from Jeffrey Law <law@cs.utah.edu>.
4893 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4894 templates for 1.1 FP computational instructions.
4896 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4898 * h8500-dis.c (print_insn_h8500): Address argument is type
4900 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4903 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4904 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4906 * sparc-dis.c (compare_opcodes): Move static declaration to
4909 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4911 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4912 instruction, remove unimp hack from 'l' argument.
4914 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4916 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4919 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4921 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4922 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4925 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4927 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4928 arrays of string pointers to 2-d arrays of chars, to save
4931 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4933 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4934 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4936 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4938 * hppa-dis.c: New file from Utah, adapted to new disassembler
4940 * Makefile.in: Include it.
4942 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4944 * sh-dis.c, sh-opc.h: New files.
4946 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4948 * alpha-dis.c, alpha-opc.h: New files.
4950 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4952 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4955 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4957 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4959 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4961 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4964 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4966 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4967 and double percent signs a few places.
4969 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4971 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4972 Use info->print_address_func not print_address.
4974 * dis-buf.c (generic_print_address): New function.
4976 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4978 * Makefile.in: Add sparc-dis.c.
4979 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4981 Add `add' instruction to the set that get checked
4982 for a preceding `sethi' in order to print an absolute address.
4983 * (print_insn): Disassembly prefers real instructions.
4984 (is_delayed_branch): Speed up.
4985 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4986 Still missing some float ops, and needs testing.
4987 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4988 F_ALIAS. Use printf, not fprintf, when not passing a file
4990 (compare_opcodes): Check that identical instructions have
4991 identical opcodes, complain otherwise.
4994 * Include reg_names.
4996 Use dis-asm.h/read_memory_func interface.
4998 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5000 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5001 deliberately return non-zero to setjmp from longjmp. Otherwise
5002 this code fails to compile.
5004 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5006 * m68k-dis.c: Fix prototype for fetch_arg().
5008 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5010 * dis-buf.c: New file, for new read_memory_func interface.
5011 Makefile.in (OFILES): Include it.
5012 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5013 Use new read_memory_func interface.
5015 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5017 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5018 * h8500-opc.h: Fix couple of opcodes.
5020 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5022 * Makefile.in: add dvi & installcheck targets
5024 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5026 * Makefile.in: Update for h8500-dis.c.
5028 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5030 * h8500-dis.c, h8500-opc.h: New files
5032 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5034 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5035 ../include/dis-asm.h.
5036 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5037 and ../gdb/m68k-pinsn.c).
5038 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5039 and ../gdb/i386-pinsn.c).
5040 * m68881-ext.c: New file. Moved definition of
5041 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5042 * Makefile.in: Adjust for new files.
5043 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5044 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5045 can be dis-assembled.
5047 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5049 * mips-dis.c (print_insn_arg): Now returns void.
5051 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5053 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5054 files that use the macros.
5056 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5058 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5059 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5060 (CFILES): Added mips-dis.c.
5062 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5064 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5065 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5067 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5069 * Makefile.in: Improve *clean rules.
5070 * configure.in: Allow a default host.
5072 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5074 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5075 files include other sysdep files
5077 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5079 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5081 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5083 * configure.in: For host support, use ../bfd/configure.host
5084 so it stays in sync with the ../bfd/hosts database.
5086 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5088 * configure.in: use cpu-vendor-os triple instead of nested cases
5090 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5092 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5093 *always* the wrong one.
5095 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5097 * z8kgen.c: added copyright info
5099 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5101 * z8k-dis.c (unparse_instr): prettier tabs
5102 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5104 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5106 * configure.in: Add ncr* configuration.
5107 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5108 picayune ANSI compilers happy.
5110 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5112 * configure.in (i386): Make i386 and i486 synonymous for now.
5113 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5115 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5117 * Makefile.in (install): Fix typo.
5119 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5121 * Makefile.in (make): Remove obsolete crud.
5122 (sparc-opc.o): Avoid Sun Make VPATH bug.
5124 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5126 * Makefile.in: since there are no SUBDIRS, remove rule and
5127 references of subdir_do.
5129 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5131 * Makefile.in (install): Get the library name right here too.
5132 Don't install bfd.h, since it's unrelated to this library. No
5133 subdirs to recurse into, either.
5134 (CFILES): The source file has a .c suffix, not .o.
5136 * sparc-opc.c: New file, moved from BFD.
5137 * Makefile.in (OFILES): Build it.
5139 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5141 * z8k-dis.c: fixed forward refferences of some declarations.
5143 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5145 * Makefile.in: get the name of the library right
5147 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5149 * z8k-dis.c: knows how to disassemble z8k stuff
5150 * z8k-opc.h: new file full of z8000 opcodes
5154 version-control: never
projects / platform / upstream / binutils.git / blob