2 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
4 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
8 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
11 * cgen-asm.in (insert_1): New function.
12 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
13 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
14 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
15 * cgen-dis.in (extract_1): New function.
16 (extract_normal): buf_ctrl renamed to ex_info, update type.
17 Progress on handling of CGEN_INT_INSN_P.
18 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
19 Update handling of CGEN_INT_INSN_P. Handle errors from
20 @arch@_cgen_extract_operand.
21 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
22 (default_print_insn): Renamed from print_insn.
23 Handle ! CGEN_INT_INSN_P.
24 (print_insn_@arch@): Handle error returns from print_insn.
25 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
26 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
27 (@arch@_cgen_lookup_get_insn_operands): Ditto.
29 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
32 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
34 * m10300-opc.c: Allow autoincrement stores using the same register
35 for source and destination operands.
37 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
39 * m10300-opc.c: DSP instrutions which only write to one general
40 register have no restrictions on matching operands.
42 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
45 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
47 * m32r-opc.h,m32r-opc.c: Regenerate.
50 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
52 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
55 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
57 * i386-dis.c (OP_3DNowSuffix): New static function.
60 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
61 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
62 (insn_codep): New static variable.
63 (print_insn_x86): Init insn_codep after prefixes.
64 (grps): Add GRP14 entries for prefetch, prefetchw.
67 From Jeff B Epler <jepler@usgs.gov>
68 * i386-dis.c (Suffix3DNow): New table.
70 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
72 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
74 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
76 * d10v-dis.c (print_operand): If num is nonzero, then
77 add OPERAND_ACC1, not OPERAND_ACC0.
79 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
81 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
84 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
86 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
90 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
92 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
95 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
97 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
99 start-sanitize-nortel-ppc750
100 1998-09-09 Michael Meissner <meissner@cygnus.com>
102 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
105 end-sanitize-nortel-ppc750
106 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
108 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
110 (print_insn_little_arm): Detect Thumb symbols in elf object
113 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
115 * alpha-dis.c (print_insn_alpha): Use the machine type to
116 decide which PALcode set to include.
118 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
120 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
122 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
124 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
125 MSUB and MSUBS instructions.
128 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
130 * mips-opc.c: Insert contents of vu0.h, rather than including it.
132 * Makefile.am: Rebuild dependencies.
136 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
138 * ppc-opc.c (powerpc_operands): Omit parens around additions in
141 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
143 start-sanitize-coldfire
144 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
145 ColdFire, as below for mulsl and mulul.
147 end-sanitize-coldfire
148 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
149 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
150 +, -, and d for ColdFire.
152 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
153 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
154 (extract_mbe): Likewise.
156 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
158 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
160 * m10300-opc.c: First cut at UDF instructions.
162 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
164 * m32r-opc.c: Regenerate (remove semantic descriptions).
166 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
168 * arm-dis.c (print_insn_big_arm): Fix indentation.
169 (print_insn_little_arm): Likewise.
171 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
173 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
175 (print_insn_little_arm): Likewise.
177 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
179 Move all global state data into opcode table struct, and treat
180 opcode table as something that is "opened/closed".
181 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
182 (cgen_asm_init): Delete.
183 (cgen_set_parse_operand_fn): New function.
184 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
185 (cgen_dis_init): Delete.
186 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
187 (cgen_current_{opcode_table_mach,endian}): Delete.
188 start-sanitize-cygnus
189 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
190 * cgen-dis.in (all fns): Ditto.
191 * cgen-opc.in (all fns): Ditto.
193 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
195 start-sanitize-cygnus
196 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
198 * cgen-dis.in (print_normal): Split into two.
199 (print_address): New function.
200 (extract_insn_normal): Clarify insn_value arg.
201 (print_int_insn): Renamed from print_insn.
202 (print_insn): New arg.
203 (print_insn_@arch@): Open opcode table if not already done so.
204 Move reading of insn into print_insn.
207 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
209 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
213 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
215 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
216 accept an accumulator choice.
217 * m32r-opc.c,m32r-opc.h: Regenerate.
220 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
222 * m10300-opc.c: Add entries for "no_match_operands" field in
226 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
228 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
232 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
234 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
237 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
239 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
241 * m10300-opc.c: Add autoincrement memory loads/stores.
245 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
247 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
248 phmsubh respectively.
251 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
253 start-sanitize-cygnus
254 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
256 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
257 @arch_cgen_get_int_operand.
258 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
259 Update call to @arch@_cgen_insert_operand.
260 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
261 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
262 (extract_insn_normal): New arg `pc', callers updated.
263 Update call to @arch@_cgen_extract_operand.
264 (print_insn): Update call to CGEN_EXTRACT_FN.
266 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
269 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
271 * m10300-opc.c: Fix load to sp and store from sp for the am33.
272 Add more multimedia instructions.
274 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
276 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
281 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
283 * mips-opc.c (pref): Enabled for the r5900.
286 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
288 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
290 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
292 (OP_J): Remove unnecessary subtraction when 16-bit displacement
293 will be masked later.
296 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
298 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
301 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
303 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
304 from raw register #s to symbolic names to make debugging easier.
307 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
309 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
311 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
313 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
314 start-sanitize-cygnus
315 * Makefile.am (CGENDIR): Set via configure.
316 (CGEN): New variable.
317 (CGENFILES): object.scm renamed to cos.scm.
318 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
319 (stamp-m32r): Pass prefix to run-cgen.
320 * Makefile.in: Regenerate.
321 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
322 * cgen-dis.in: Ditto.
323 * cgen-opc.in: Ditto.
324 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
325 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
326 * configure: Regenerate.
330 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
332 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
334 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
336 * m10300-opc.c: Reorder more instructions so that we do not
337 accidentally match a mn10300 instruction when we really
338 wanted an am33 instruction.
341 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
343 * m10300-dis.c: Only recognize instructions from the currently
345 * m10300-opc.c: Add field indicating the particular variant of
346 the mn10300 each instruction is available on.
348 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
350 * configure.in: For bfd_vax_arch, build vax-dis.lo.
351 * Makefile.am: Rebuild dependencies.
352 (CFILES): Add vax-dis.c.
353 (ALL_MACHINES): Add vax-dis.lo.
354 * aclocal.m4: Rebuild with current libtool.
355 * configure, Makefile.in: Rebuild.
357 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
359 * vax-dis.c: New file, from work by Pauline Middelink
360 <middelin@polyware.iaf.nl>.
361 * disassemble.c (ARCH_vax): Define if ARCH_all.
362 (disassembler): Add case for ARCH_vax.
363 * makefile.vms: Support compilation on vms/vax.
366 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
368 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
369 the DVP_OPERAND_RELOC_11_S4 relocation.
373 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
375 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
377 (disassemble): Correctly handle FMT_D10 instructions.
379 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
380 am33 shift instructions.
382 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
384 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
385 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
387 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
388 (mn10300_opcodes): Reorder so as to try and select opcodes from
389 the core chip when multiple alternatives exist. Change several
390 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
391 "macbu" instructions. Fix typos in a couple DSP instructions too.
394 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
396 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
397 related to sign extension and the size of ints.
399 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
401 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
402 instructions. Support (sp) addressing mode by expanding it into
406 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
408 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
409 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
410 be used as immediate values.
414 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
416 * m10300-opc.c: Support 4 byte DSP instructions.
419 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
421 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
424 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
426 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
429 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
431 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
434 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
436 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
437 found on the mn10300.
440 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
442 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
445 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
447 * mips-dis.c (print_insn_little_mips): Previously, instruction
448 printing references the symbol table to determine whether the
449 instruction resides in a block regular instructions or mips16
450 instructions. However, when the disassembler gets used in other
451 environments where the symbol table is not present, we no longer
452 rely in the symbol table, rather, use the low bit of the
453 instructions address to guess. There should be no change for usage
454 of the disassembler in host based programse, gdb ,objdump.
455 (print_insn_big_mips): ditto.
456 (print_insn_mips): ditto
458 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
460 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
462 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
465 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
466 operands for the am33.
467 (mn10300_opcodes): Add new instructions from the am33.
469 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
471 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
473 * i386-dis.c (index16): Add '%' to register names. Use ','
476 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
478 * i386-dis.c: Don't print opcode suffix when we can figure out the
479 size (and gas can!) by register operands, or from the default
481 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
483 (dis386, dis386_twobyte, grps): Use new suffix macros.
484 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
485 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
486 order of cmps operands to agree with Intel docs. Correct operand
487 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
488 agree with Intel docs.
489 (print_insn_x86): Print orphan fwait before other prefixes.
490 Return correct byte count for orphan fwait with prefixes. Don't
491 print `bound' operands in reverse order.
492 (ckprefix): Stop accumulating prefixes if we get fwait.
493 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
495 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
497 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
498 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
500 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
502 Fix problems when bfd_vma is wider than long.
503 * i386-dis.c: Make op_address and start_pc unsigned.
504 (set_op): Make parameter unsigned.
505 (print_insn_x86): Cast to bfd_vma when passing a value to
507 * ns32k-dis.c (CORE_ADDR): Don't define.
508 (print_insn_ns32k): Change type of addr to bfd_vma. Use
509 bfd_scan_vma to read back address.
510 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
512 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
513 (NEXTULONG): New definition.
514 (print_insn_m68k): Avoid overflow when computing third argument of
516 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
517 Use disp instead of val to store offset values.
518 (print_indexed): Use base_disp instead of word to store base
519 displacement, to avoid overflow.
520 * m10300-dis.c (disassemble): Cast value to long when computing
521 pc-relative address, to get correct sign extension.
523 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
525 * m32r-opc.c: Regenerate.
527 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
529 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
530 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
532 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
534 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
536 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
538 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
540 (OP_DSreg): Rename from OP_DSSI.
541 (OP_ESreg): Rename from OP_ESDI.
542 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
544 (append_seg): Rename from append_prefix.
545 (ptr_reg): New function.
546 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
548 (PREFIX_ADDR): Rename from PREFIX_ADR.
549 (float_reg): Add non-broken opcodes for people who don't want
552 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
554 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
557 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
559 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
561 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
563 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
564 0; produce error message for shifts of size 32 (or 64 for 64-bit
565 shifts), because the hardware doesn't support them.
568 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
570 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
573 * vu0.h (sqc2): Fix opcode.
575 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
579 start-sanitize-cygnus
580 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
582 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
583 Change pinfo to use WR_HILO.
586 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
588 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
589 LONG_2, LONG_2b formats to use this new operand.
591 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
593 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
595 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
597 * sparc-dis.c (print_insn_sparc): big endian instruction / little
600 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
602 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
603 and SHORT_B3b formats to use Rb instead of Ra.
605 Add FLAG_MUL16 to MUL2XH opcode.
607 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
608 to existing 1.1.1 parallelisation prohibition procedure.
610 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
612 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
613 * cgen-dis.in (extract_normal): Likewise.
614 * m32r-asm.c,m32r-dis.c: Regenerate.
617 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
619 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
623 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
625 * mips-opc.c (multu1): Add two operand variant for the r5900.
628 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
630 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
631 with a shift count of 0.
634 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
636 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
638 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
640 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
641 (_print_insn_mips): Likewise.
642 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
646 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
648 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
649 (cgen_hw_lookup_by_num): New function.
652 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
655 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
657 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
659 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
661 * sparc-dis.c (print_insn_sparc): Always fetch instructions
662 as big-endian on SPARClite.
665 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
667 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
669 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
673 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
675 * d30v-opc.c (pre_defined_register): Remove alias for r0.
678 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
680 * mips-opc.c (break): Added 20-bit single-operand break
681 instruction for R5900 only.
684 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
686 * po/Make-in (install-info): New target.
688 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
690 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
691 * configure: Rebuild.
693 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
695 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
696 variety of ISA2 instructions to set bottom ten bits of trap code.
698 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
700 * Makefile.am (config.status): Add explicit target so that
701 config.status depends upon bfd/configure.in.
702 * Makefile.in: Rebuild.
704 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
706 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
707 instructions to set bottom ten bits of break code.
708 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
709 for above optional argument.
711 start-sanitize-cygnus
712 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
714 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
715 * m32r-opc.h: Regenerate.
718 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
720 * makefile.vms: Run dec c with /nodebug.
722 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
724 * Makefile.in: Rebuilt.
725 * Makefile.am: Regenerated dependencies with mkdep.
727 * opintl.h (_): Define as dgettext.
729 start-sanitize-cygnus
730 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
732 * configure.in: Add support for --enable-cgen-maint.
733 * Makefile.am (M32R_DEPS): New variable.
734 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
735 * aclocal.m4: Regenerate.
736 * Makefile.in: Regenerate.
737 * configure: Regenerate.
739 * Makefile.am (CGENFILES): Add minsn.scm.
742 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
744 * cgen-asm.c: Internationalised.
745 start-sanitize-cygnus
746 * cgen-asm.in: Internationalised.
747 * cgen-opc.in: Internationalised.
749 * m32r-asm.c: Internationalised.
750 * m32r-dis.c: Internationalised.
751 * m32r-opc.c: Internationalised.
753 * aclocal.m4: Regenerated.
754 * configure: Regenerated.
755 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
756 * Makefile.in: Rebuild.
757 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
758 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
760 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
762 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
764 * aclocal.m4, configure: Rebuild with current tools.
766 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
768 * opintl.h: New file - contains internationalisation macros used
769 by source files in this directory.
770 * po/: New subdirectory - contains internationalisation files.
771 * po/Make-in: New file - Makefile constructor.
772 * po/POTFILES.in: New file - list of files in opcodes directory
773 that should be scan for internationalisation macros.
774 * po/opcodes.pot: New file - list of internationisation strings
775 found in files mentioned in po/POTFILES.in.
776 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
777 entry. Add intl directory to include paths.
778 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
779 HAVE_STRCPY, HAVE_LC_MESSAGES
780 * configure.in: Add rule to build Makefile in po subdirectory.
781 * Makefile.in: Rebuilt.
782 * aclocal.m4: Rebuilt.
783 * config.in: Rebuilt.
784 * configure: Rebuilt.
785 * alpha-opc.c: Internationalised.
786 * arc-dis.c: Internationalised.
787 * arc-opc.c: Internationalised.
788 * arm-dis.c: Internationalised.
789 * cgen-asm.c: Internationalised.
790 * d30v-dis.c: Internationalised.
791 * dis-buf.c: Internationalised.
793 * dvp-dis.c: Internationalised.
794 * dvp-opc.c: Internationalised.
796 * h8300-dis.c: Internationalised.
797 * h8500-dis.c: Internationalised.
798 * i386-dis.c: Internationalised.
799 * m10200-dis.c: Internationalised.
800 * m10300-dis.c: Internationalised.
801 * m68k-dis.c: Internationalised.
802 * m88k-dis.c: Internationalised.
803 * mips-dis.c: Internationalised.
804 * ns32k-dis.c: Internationalised.
805 * opintl.h: Internationalised.
806 * ppc-opc.c: Internationalised.
807 * sparc-dis.c: Internationalised.
808 * v850-dis.c: Internationalised.
809 * v850-opc.c: Internationalised.
811 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
813 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
814 (asm_hash_table_entries): New variable.
815 (cgen_asm_init): Free asm_hash_table_entries.
816 (hash_insn_array,hash_insn_list): New functions.
817 (build_asm_hash_table): Use them. Hash macro insns as well.
818 (cgen_asm_lookup_insn): Update.
819 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
820 (dis_hash_table_entries): New variable.
821 (cgen_dis_init): Free dis_hash_table_entries.
822 (hash_insn_array,hash_insn_list): New functions.
823 (build_dis_hash_table): Use them. Hash macro insns as well.
824 (cgen_dis_lookup_insn): Update.
825 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
826 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
827 (cgen_macro_insn_count): New function.
828 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
829 All callers updated. Sanity check result of extract fn.
830 (@arch@_cgen_get_insn_operands): Change result type to void.
831 Delete args insn_value, length. New arg fields. All callers updated.
832 (@arch@_cgen_lookup_get_insn_operands): New function.
833 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
835 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
837 * i386-dis.c (OP_DSSI): Print segment override.
840 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
842 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
846 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
848 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
852 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
854 * vu0.h (vlqd, vlqi): Update per revised specs.
858 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
860 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
861 (vif_operands): Update.
862 (vif_get_unpackloc): Delete.
863 (state_vif_unpackloc{,_star_p}): Delete.
864 (dvp_opcode_init_parse): Update.
865 (vif_unpack_len_value): Avoid divide by zero.
869 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
871 * vu0.h: Specs changed for VCALLMSR bit pattern.
872 * mips-dis.c: (print_insn_arg) Matching change.
875 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
877 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
880 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
882 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
883 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
884 * configure.in: Define and substitute WIN32LDFLAGS and
886 * aclocal.m4: Rebuild with new libtool.
887 * configure, Makefile.in: Rebuild.
890 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
892 * vu0.h: Corrected bit pattern for VMAXI opcode.
895 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
897 * m32r-opc.c: Regenerate.
900 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
902 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
903 (dvp_expand_macro): Implement.
904 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
905 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
908 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
910 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
911 before trying to copy it.
912 * Makefile.in: Rebuild.
914 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
916 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
919 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
921 * m32r-opc.c: Fix bit patterns for SAT and SATB.
924 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
926 * ns32k-dis.c (bit_extract_simple): New function to extract bits
927 from an arbitrary valid buffer instead of fetching them on demand
929 (invalid_float): use bit_extract_simple() instead of bit_extract().
932 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
934 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
935 * m32r-opc.h: Add extra control registers.
938 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
940 From H.J. Lu <hjl@gnu.org>:
941 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
944 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
946 * Branched binutils 2.9.
948 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
950 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
951 disassembling last 4 bytes of a section.
953 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
955 Fix some gcc -Wall warnings:
956 * arc-dis.c (print_insn): Add casts to avoid warnings.
957 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
958 * d10v-dis.c (dis_long, dis_2_short): Likewise.
960 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
961 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
962 (parse_bc, parse_vfreg, parse_accdest): Likewise.
963 (parse_ffstreg, parse_vif_mode): Likewise.
965 * m10200-dis.c (disassemble): Likewise.
966 * m10300-dis.c (disassemble): Likewise.
967 * ns32k-dis.c (print_insn_ns32k): Likewise.
968 * ppc-opc.c (insert_ral, insert_ram): Likewise.
969 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
970 * cgen-opc.c (cgen_keyword_search_next): Likewise.
971 * d10v-dis.c (dis_long, dis_2_short): Likewise.
972 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
974 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
975 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
976 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
978 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
980 * tic80-dis.c (print_one_instruction): Likewise.
982 * w65-dis.c (print_operand): Likewise.
983 * z8k-dis.c (fetch_data): Likewise.
984 * a29k-dis.c: Add return type for find_byte_func_type.
985 * arc-opc.c: Include <stdio.h>. Remove declarations of
986 insert_multshift and extract_multshift.
987 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
989 (extract_value): Fully parenthesize expression.
991 * dvp-opc.c: Include <ctype.h>.
992 (print_sdest): Add default case to switch.
994 * h8500-dis.c (print_insn_h8500): Initialize local variables.
995 * h8500-opc.h (h8500_table): Fully bracket initializer.
996 * w65-opc.h (optable): Likewise.
997 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
998 * i386-dis.c (OP_E): Initialize local variables.
999 * m10200-dis.c (print_insn_mn10200): Likewise.
1000 * mips-dis.c (print_insn_mips16): Likewise.
1001 * sh-dis.c (print_insn_shx): Likewise.
1002 * v850-dis.c (print_insn_v850): Likewise.
1003 * ns32k-dis.c (print_insn_arg): Declare.
1004 (get_displacement, invalid_float): Declare.
1005 (list_search, sign_extend, flip_bytes): Declare return type.
1006 (get_displacement): Likewise.
1007 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1009 (print_insn_ns32k): Make i unsigned.
1010 (invalid_float): Make static. Declare type of val.
1011 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1012 on each for iteration.
1013 * tic30-dis.c (get_indirect_operand): Likewise.
1014 * z8k-dis.c (print_insn_z8001): Declare return type.
1015 (print_insn_z8002): Likewise.
1016 (unparse_instr): Fix sprintf format strings.
1018 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1020 * mips-opc.c: Add "sync.l" and "sync.p".
1023 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1025 * dvp-opc.c (extract_vif_datalen): Rewrite.
1026 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1028 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1030 * dvp-dis.c (print_insn): Print unpack address in hex.
1031 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1032 Don't skip over '*', just record it.
1033 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1034 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1035 Don't skip over '*', just record it.
1036 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1037 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1038 (vif_opcodes): Likewise.
1039 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1040 (vif_macros,vif_macro_count): New globals.
1041 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1042 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1043 (vif_get_wl_cl): New function.
1044 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1047 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1049 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1050 default m68k variant to recognize.
1052 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1053 (ctrl, cobr, mem, ea): Likewise.
1054 (print_addr): Likewise. Remove cast.
1055 (ea): Cast argument of print_addr to bfd_vma.
1057 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1059 (cgen_parse_unsigned_integer): Likewise.
1060 (cgen_parse_address): Likewise.
1062 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1064 * i960-dis.c (ctrl): Add full braces to structure initialization.
1065 (cobr, mem, reg): Likewise.
1066 (ea): Correct parenthesization in expression.
1068 * cgen-asm.c: Include <ctype.h>.
1069 (build_asm_hash_table): Remove unused local variable i.
1070 (cgen_parse_keyword): Add casts to avoid warnings.
1072 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1073 symbol. Fix indentation.
1074 (print_insn_little_arm): Likewise.
1076 start-sanitize-r5900
1077 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1079 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1083 start-sanitize-m32rx
1084 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1086 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1091 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1093 * dvp-opc.c (vif_operand_datalen_special): New global.
1096 start-sanitize-r5900
1097 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1099 * vu0.h (vcallms): Use 'O' for call target operand.
1100 * mips-dis.c (print_insn_arg): Handle 'O'.
1103 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1105 * configure.in: Use AM_DISABLE_SHARED.
1106 * aclocal.m4, configure: Rebuild with libtool 1.2.
1108 start-sanitize-r5900
1109 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1111 * mips-dis.c: Change '%' to '#' in r5900 support.
1115 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1117 These patches are courtesy of Jonathan Walton and Tony Thompson
1118 (athompso@cambridge.arm.com).
1120 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1123 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1124 both the offset and the label closest to the destination.
1126 start-sanitize-r5900
1127 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1129 * vu0.h: New file with cop2/vu0 instructions.
1130 * mips-opc.c: Include vu0.h.
1131 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1133 (print_insn_mips): Do not emit a tab after an instruction if the
1134 first arg is an instruction completer (&). If the next arg is an
1135 escape character (%), then print the next arg verbatim.
1136 * Makefile.am (mips-opc.lo): Depend on vu0.h
1140 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1142 * dvp-opc.c (vif_opcodes): Add stcycl.
1144 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1146 * dvp-dis.c (print_dma): Change length from 16 to 8.
1149 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1151 * m32r-opc.h: Regenerate.
1154 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1156 * dvp-opc.c (print_dest1): Print dest spec again.
1157 (print_vfreg,print_accdest): Likewise.
1158 (vif_unpack_len): Round result up to word boundary.
1161 start-sanitize-vr4320
1162 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1164 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1166 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1168 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1173 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1175 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1176 (print_insn): Do mask comparison on proper opcode word.
1177 Print unsigned values in hex.
1178 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1179 (parse_bc): Catch missing dest.
1180 (parse_vfreg): Replace atoi call with strtol.
1181 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1182 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1183 (extract_gif_eop): New function.
1184 (gif_operands): Update eop entry.
1185 (VGIFOP,VGIFNREGS): Fix calcs.
1186 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1187 (gif_regs): Add entry for unused 11 case.
1188 (print_gif_regs): Print empty list instead of nothing.
1189 (extract_gif_nloop): Fix value calc.
1190 (print_gif_nloop): Always print value, even if 0.
1191 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1192 (vif_operands): Use them for wl,cl fields.
1193 (state_vif_wl,state_vif_cl): New static locals.
1194 (parse_vif_mode): Handle numeric args.
1195 (vif_unpack_len_value,vif_unpack_len): New functions.
1196 (vif_insn_len): Call vif_unpack_len.
1199 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1201 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1203 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1205 * cgen-asm.in: Move insertion of generated routines to top of file.
1206 (insert_normal): Add prototype. Delete `shift' arg.
1207 * cgen-dis.in: Move insertion of generated routines to top of file.
1208 (extract_normal): Add prototype. Delete `shift' arg.
1209 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1210 (print_keyword): Add prototype. Fix type of `attrs' arg.
1212 start-sanitize-vr4320
1213 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1215 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1216 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1219 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1221 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1222 assume that info->symbols is non-empty.
1224 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1226 * alpha-opc.c (cvtqs) There is no such thing.
1227 (cvttq): Missing most of the /*d variants.
1229 start-sanitize-r5900
1230 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1232 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1234 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1235 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1238 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1240 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1241 delayed branches or jumps.
1244 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1246 * dvp-opc.c (vif_operands): Add unpack[u] support.
1247 (vif_opcodes): Ditto.
1248 (*_vif_imrubits): Renamed from *_vif_imrbits.
1250 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1252 * dvp-dis.c (print_insn): Handle word number.
1253 Handle mips address vs vu address.
1254 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1255 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1256 ({insert,extract}_dma_addr): Fix word ofset.
1257 ({insert,print}_gif_regs): Fix encode/decode.
1260 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1262 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1264 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1265 * tic30-dis.c (print_branch): Likewise.
1267 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1268 * dvp-dis.c (dvp_info_mach_type): New function.
1269 (print_insn_dvp): Call it.
1270 (print_vif): Return length of 4 if mpg or direct insn so following
1271 insns get properly disabled.
1272 (print_gif): Fix word order.
1273 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1274 (gif_operands): Fix word order.
1275 (gif_opcodes): Likewise.
1276 ({insert,extract,print}_gif_regs): Likewise.
1277 (gif_regs): Add new register number/name changes.
1278 (dma_opcodes): Add dmarefe insn.
1281 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1283 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1284 saved_symbol code as it is no longer needed.
1286 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1288 * cgen-asm.c: Include symcat.h.
1289 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1291 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1294 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1296 * dvp-opc.c (extra_dma_flags): Fix typos.
1297 (dma_operands): Fix word numbers.
1298 (dma_opcodes): Likewise.
1299 ({insert,extract}_dma_flags): Likewise.
1302 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1304 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1307 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1309 * dvp-dis.c (print_gif): Complete.
1310 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1311 (state_gif_{nregs,regs,nloop}): New static locals.
1312 (*_gif_*): Complete.
1313 (dvp_opcode_init_{parse,print}): Init gif state locals.
1314 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1315 (vif_insn_len): Handle `unpack'.
1316 ({insert,extract}_dma_flags): Complete.
1319 start-sanitize-r5900
1320 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1322 * mips-opc.c (mula.s): Renamed from multa.s.
1325 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1327 * m32r-opc.[ch]: Regenerate.
1330 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1332 * dvp-opc.c (dma_operands): Rewrite.
1333 (dma_operand_{count,addr}): New globals.
1334 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1335 (insert_dma_addr): Insert value into insn.
1336 (extract_dma_addr): Extract value from insn.
1338 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1340 * dvp-dis.c (print_vu): Handle loi insns.
1341 (print_insn): Likewise.
1342 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1343 (vu_operands): Make LDEST1 a FAKE operand.
1344 (parse_dest1): Allow elided argument.
1345 (print_dest1): Don't print the argument.
1347 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1349 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1350 (print_vfreg): Don't print dest spec.
1351 (parse_accdest): Dest spec is optional.
1352 (print_accdest): Don't print dest spec.
1355 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1357 * Makefile.am (CGENFILES): Update.
1358 * Makefile.in: Regenerate.
1359 * cgen-asm.in (insert_normal): Result is error message now.
1360 Validate value to be inserted.
1361 (insert_insn_normal): Result is error message now.
1362 (@arch@_cgen_assemble_insn): Update.
1363 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1364 arguments. Don't perform validation here.
1365 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1367 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1369 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1370 operand instance list.
1371 * m32r-opc.c: Regenerate.
1373 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1375 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1376 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1378 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1380 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1382 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1384 * configure.in: Get the version number from BFD.
1385 * configure: Rebuild.
1387 From H.J. Lu <hjl@gnu.org>:
1388 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1389 * Makefile.in: Rebuild.
1391 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1393 * m32r-opc.c: Regenerate.
1394 * m32r-opc.h: Regenerate.
1396 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1398 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1399 Ignore ALIAS insns if asked to.
1400 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1401 * m32r-opc.c: Regenerate.
1404 * dvp.opc.c: Nicely format opcode tables.
1405 (vu_operands): New element UFLAGS.
1406 (parse_uflags,print_uflags): New functions.
1407 (vu_upper_opcodes): Add UFLAGS to all insns.
1410 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1412 Fix rac to accept only a0:
1413 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1414 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1415 Introduce OPERAND_GPR.
1416 * d10v-dis.c (print_operand): Likewise.
1418 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1420 * cgen-opc.in: New file.
1421 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1422 * Makefile.am (CGENFILES): Add cgen-opc.in.
1423 * Makefile.in: Regenerate.
1425 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1426 (cgen_hw_lookup): Make result const.
1428 * cgen-dis.in (*): Use PTR instead of void *.
1429 (print_insn): Delete unused vars `i', `syntax'.
1431 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1434 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1436 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1437 (vif_opcodes): Update renamed insns.
1438 * dvp-dis.c (*): Likewise.
1441 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1443 * configure, aclocal.m4: Rebuild with new libtool.
1445 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1447 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1448 instructions use a PC relative branch, not absolute.
1450 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1452 * configure.in: Set libtool_enable_shared rather than
1453 libtool_shared. Remove diversion hack.
1454 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1456 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1458 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1459 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1461 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1463 * tic30-dis.c: New file.
1464 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1465 * configure.in: Handle bfd_tic30_arch.
1466 * Makefile.am: Rebuild dependencies.
1467 (CFILES): Add tic30-dis.c
1468 (ALL_MACHINES): Add tic30-dis.lo.
1469 * configure, Makefile.in: Rebuild.
1471 start-sanitize-m32rx
1472 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1474 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1475 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1476 macwhi-a and macwlo-a instructions.
1480 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1482 * dvp-opc.c, fixed encoding of a bunch of instructions to
1483 be consistent with the asmvu assembler (and inconsistent
1484 with the specification).
1486 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1488 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1489 in the opcode table. The pkemscalf instruction must come first.
1491 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1493 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1496 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1498 * m32r-opc.h (HAVE_CPU_M32R): Define.
1501 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1503 * dvp-dis.c, dvp-opc.c: New files.
1504 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1505 * configure: Regenerate.
1506 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1507 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1508 (mips-dis.lo): Compile with @archdefs@.
1509 * Makefile.in: Regenerate.
1510 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1511 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1514 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1516 * v850-opc.c (insertion routines): If both alignment and size is
1517 wrong then report this.
1519 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1521 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1522 Only recognize instructions for the current target_processor.
1524 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1526 * d10v-dis.c (PC_MASK): Correct value.
1527 (print_operand): If there's a reloc, don't calculate the
1528 address because they could be in different sections.
1530 start-sanitize-cygnus
1531 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1533 * cgen.sh: Rewrite to be like simulator's version.
1534 * Makefile.am (cgen): Update call to cgen.sh.
1535 * Makefile.in: Regenerate
1538 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1540 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1541 instruction after the 4650's "mul" instruction; nobody's using the
1542 4010 these days. If object files someday indicate which processor
1543 variant they're intended for, we can do a better job at this.
1545 start-sanitize-r5900
1546 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1548 * mips-opc.c (c.lt.s): Add r5900 variant.
1552 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1554 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1555 table provided entry size. Use CGEN_INSN_MNEMONIC.
1556 (cgen_parse_keyword): Rewrite.
1557 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1558 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1559 * cgen-opc.c: Clean up pass over `struct foo' usage.
1560 (cgen_keyword_lookup_value): Handle "" entry.
1561 (cgen_keyword_add): Likewise.
1562 start-sanitize-cygnus
1563 * Makefile.am: Add cgen support.
1564 * Makefile.in: Regenerate.
1565 * configure.in: Add cgen support.
1566 * configure: Regenerate.
1567 * aclocal.m4: Regenerate.
1568 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1571 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1573 * mips-opc.c: Add FP_D to s.d instruction flags.
1575 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1577 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1579 start-sanitize-tic80
1580 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1582 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1583 PC relative offset forms before the 15 bit forms. An assembler command
1584 line option now chooses the default.
1587 start-sanitize-r5900
1588 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1590 * mips-opc.c: Add many missing r5900 instructions.
1593 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1595 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1596 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1598 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1600 * configure: Only build libopcodes shared if --enable-shared's value
1601 was `yes', or was set to `*opcodes*'.
1602 * aclocal.m4: Likewise.
1603 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1604 original source of this bit of code. It's not clear what the best fix
1607 start-sanitize-r5900
1608 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1610 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1612 start-sanitize-tic80
1613 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1615 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1616 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1617 offset forms before the 15 bit forms, to default to the long forms.
1620 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1622 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1624 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1626 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1627 symbol if none is present.
1628 (print_insn_big_arm): Prevent examination of stored symbol if
1631 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1633 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1635 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1637 * disassemble.c: Remove disasm_symaddr() function.
1639 * arm-dis.c: Use info->symbol instead of info->flags to determine
1640 if disassmbly should be in Thumb or Arm mode.
1642 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1644 * arm-dis.c: Add support for disassembling Thumb opcodes.
1645 (print_insn_thumb): New function.
1647 * disassemble.c (disasm_symaddr): New function.
1649 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1650 (thumb_opcodes): Table of Thumb opcodes.
1652 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1654 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1656 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1657 and 'v' as operand types.
1659 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1661 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1662 <olivier.carmona@di.epfl.ch>.
1663 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1664 which has a two word opcode with a one word argument.
1666 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1668 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1669 unsigned, not signed.
1670 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1672 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1674 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1675 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1676 (ftrv): Slay the cut-and-paste monster.
1678 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1680 * d10v-dis.c (print_operand):
1681 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1683 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1685 * d10v-opc.c (OPERAND_FLAG): Split into:
1686 (OPERAND_FFLAG, OPERAND_CFLAG) .
1690 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1692 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1693 field for all INSN_MACRO's.
1694 * mips16-opc.c: same
1696 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1698 * mips-opc.c (sync,cache): These are 3900 insns.
1700 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1702 sh-opc.h (sh_table): Remove ftst/nan.
1704 start-sanitize-cygnus
1705 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1707 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1708 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1710 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1714 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1716 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1717 Add tx49 insns and configury.
1720 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1722 * mips-opc.c (ffc, ffs): Fix mask.
1724 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1726 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1729 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1731 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1732 start-sanitize-cygnus
1733 Added VR5400 instructions.
1734 (N5): New cpu-id macro.
1736 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1738 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1740 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1741 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1743 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1745 * v850-dis.c (disassemble): Replace // with /* ... */
1747 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1749 * sparc-opc.c: Add wr & rd for v9a asr's.
1750 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1751 (v9a_asr_reg_names): New variable.
1752 Patch from David Miller <davem@vger.rutgers.edu>.
1754 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1756 * sparc-opc.c (v9notv9a): New insn type.
1757 (IMPDEP): Move to the end to not conflict with edge8 et al.
1758 Patch from David Miller <davem@vger.rutgers.edu>.
1760 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1762 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1764 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1766 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1768 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1770 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1771 of disassemble_info structure to determine if an overlay address
1772 has a matching symbol in low memory.
1774 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1775 new symbol_at_address_func field in disassemble_info structure.
1777 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1779 * v850-opc.c (extract_d22): Use signed arithmatic.
1781 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1783 * mips-opc.c: Three op mult is not an ISA insn.
1785 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1787 * mips-opc.c: Fix formatting.
1789 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1791 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1792 than assuming that char is signed. Explicitly sign extend 16 bit
1793 values, rather than assuming that short is 16 bits.
1794 (OP_sI, OP_J, OP_DIR): Likewise.
1796 start-sanitize-v850e
1797 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1799 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1803 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1805 * v850-opc.c: Fix typo in comment.
1807 * v850-dis.c (disassemble): Add test of processor type when
1808 determining opcodes.
1810 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * configure.in: Use a diversion to set enable_shared before the
1813 arguments are parsed.
1814 * configure: Rebuild.
1816 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1818 * m68k-opc.c (TBL1): Use ! rather than `.
1819 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1821 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1823 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1825 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1827 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1830 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1831 * aclocal.m4: Rebuild with new libtool.
1832 * configure: Rebuild.
1834 start-sanitize-v850e
1835 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1837 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1840 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1842 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1844 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1846 * v850-opc.c (v850_opcodes): Further rearrangements.
1848 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1850 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1852 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1854 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1857 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1859 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1861 * mips16-opc.c: Added mips16 sdbbp.
1864 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1866 * v850-opc.c: Initialise processors field of v850_opcode structure.
1868 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1870 Merge changes from Martin Hunt:
1872 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1874 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1875 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1876 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1878 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1880 * d30v-dis.c (print_insn): First operand of d*i (delayed
1881 branch) instructions is relative.
1883 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1884 (d30v_operand_table): Add IMM6S3 type.
1885 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1887 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1888 and cmp instructions.
1890 * d30v-opc.c: Correct entries for repeat*, and sat*.
1891 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1892 types. Correct several formats.
1894 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1896 * d30v-opc.c (pre_defined_registers): Change control registers.
1898 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1899 SHORT_C2. Manual was incorrect.
1901 * d30v-dis.c (lookup_opcode): Return value now indicates
1902 if an opcode has a short and a long form. Used for deciding
1903 to append a ".s" or ".l".
1904 (print_insn): Append a ".s" to an instruction if it is
1905 the short form and ".l" if it is a long form. Do not append
1906 anything if the instruction has only one possible size.
1908 * d30v-opc.c: Change mulx2h to require an even register.
1909 New form: SHORT_A2; a SHORT_A form that needs an even
1910 register as the first operand.
1912 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1913 instruction was not being disassembled if there were an odd
1914 number of instructions.
1916 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1918 start-sanitize-v850e
1919 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1921 * v850-dis.c (disassemble): Improved display of register lists.
1924 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1926 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1927 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1928 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1929 fandnot1s, fandnot2s.
1931 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1933 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1935 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1937 * cgen-asm.c (cgen_parse_address): New argument resultp.
1938 All callers updated.
1939 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1941 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1943 * mn10200-dis.c (disassemble): PC relative instructions are
1944 relative to the next instruction, not the current instruction.
1946 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1948 * v850-dis.c (disassemble): Only signed extend values that are not
1949 returned by extract functions.
1950 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1952 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1954 * v850-opc.c: Update comments. Remove use of
1955 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1957 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1959 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1961 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1963 * configure: Rebuilt with latest devo autoconf for NT support.
1965 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1967 * v850-dis.c (disassemble): Use curly brace syntax for register
1970 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1971 where r0 is being used as a destination register.
1973 start-sanitize-v850e
1974 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1976 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1979 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1981 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1982 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1983 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1984 Add insns to access SGR and DBR.
1985 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1987 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1989 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1991 start-sanitize-v850e
1992 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1994 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1995 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1998 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2000 * configure (cgen_files): Add support for v850e target.
2001 * configure.in (cgen_files): Add support for v850e target.
2003 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2005 * configure (cgen_files): Add support for v850ea target.
2006 * configure.in (cgen_files): Add support for v850ea target.
2009 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2011 * configure.in (bfd_arc_arch): Add.
2012 * configure: Rebuild.
2013 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2014 * Makefile.in: Rebuild.
2015 * arc-dis.c, arc-opc.c: New files.
2016 * disassemble.c (ARCH_all): Define ARCH_arc.
2017 (disassembler): Add ARC support.
2019 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2021 start-sanitize-v850e
2022 * v850-dis.c (disassemble): Add support for v850EA instructions.
2024 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2025 (v850_opcodes): Add v850EA instructions.
2027 * v850-dis.c (disassemble): Add support for v850E instructions.
2029 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2030 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2031 insert_spe, extract_spe): New Functions.
2032 (v850_opcodes): Add v850E instructions.
2035 * v850-opc.c: Reorganised and re-layed out to improve readability
2038 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2040 * configure: Rebuild with autoconf 2.12.1.
2042 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * aclocal.m4, configure: Rebuild with new automake patches.
2046 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2048 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2049 * acinclude.m4: Just include acinclude.m4 from BFD.
2050 * aclocal.m4, configure: Rebuild.
2052 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2054 * Makefile.am: New file, based on old Makefile.in.
2055 * acconfig.h: New file.
2056 * acinclude.m4: New file.
2057 * stamp-h.in: New file.
2058 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2059 Removed shared library handling; now handled by libtool. Replace
2060 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2061 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2062 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2063 handling in AC_OUTPUT.
2064 * dep-in.sed: Change .o to .lo.
2065 * Makefile.in: Now built with automake.
2066 * aclocal.m4: Now built with aclocal.
2067 * config.in, configure: Rebuild.
2069 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2071 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2073 start-sanitize-r5900
2074 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2076 * mips-opc.c: Fix coding of mtsa.
2079 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2081 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2083 * sparc-dis.c (sorted_opcodes): New static local.
2084 (struct opcode_hash): `opcode' is pointer to const element.
2085 (build_hash): First arg is now table of sorted pointers.
2086 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2087 (compare_opcodes): Update.
2089 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * cgen-opc.c: #include <ctype.h>.
2092 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2093 Handle case insensitive hashing.
2094 (hash_keyword_value): Change type of `value' to unsigned int.
2096 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2098 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2099 precision FP, mark it as such. Likewise for double precision
2100 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2102 start-sanitize-r5900
2103 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2106 start-sanitize-r5900
2107 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2109 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2110 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2113 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2115 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2117 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2118 nesting depth when all the macros are expanded.
2120 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * sparc-opc.c: The fcmp v9a instructions take an integer register
2123 as a destination, not a floating point register. From Christian
2124 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2126 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2128 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2129 syntax. From Roman Hodek
2130 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2132 * i386-dis.c (twobyte_has_modrm): Fix pand.
2134 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2136 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2138 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2140 * arm-dis.c: Add prototypes for arm_decode_shift and
2143 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2145 * mips-opc.c: Add r3900 insns.
2147 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2149 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2150 print delay slot instructions on the same line. When using a PC
2151 relative load, add a comment with the value being loaded if it can
2154 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2156 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2157 to pushS/popS for segment regs and byte constant so that
2158 pushw/popw printed when in 16 bit data mode.
2160 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2161 print cbtw, cwtd in 16 bit data mode.
2162 * i386-dis.c (putop): extra case W to support above.
2164 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2165 address size prefix in 16 bit address mode.
2167 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2169 * sh-dis.c: Reindent. Rename local variable fprintf to
2172 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2174 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2176 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2178 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2180 * mips16-opc.c (mip16_opcodes): same.
2182 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2184 * m68k-opc.c (moveb): Change $d to %d.
2186 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2188 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2189 (twobyte_has_modrm): Likewise.
2191 (OP_MMX, OP_EM, OP_MS): New static functions.
2193 * i386-dis.c: Revert patch of April 4. The output now matches
2196 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2198 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2201 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2203 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2205 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2207 * Makefile.in (install): Depend upon installdirs.
2208 (installdirs): New target.
2210 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2212 From Thomas Graichen <graichen@rzpd.de>:
2213 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2214 * configure: Rebuild.
2216 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2218 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2219 Delete string{,s}.h support.
2221 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2223 * cgen-asm.c (cgen_parse_operand_fn): New global.
2224 (cgen_parse_{{,un}signed_integer,address}): Update call to
2225 cgen_parse_operand_fn.
2226 (cgen_init_parse_operand): New function.
2227 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2228 from cgen_asm_init_parse.
2229 (m32r_cgen_assemble_insn): New operand `errmsg'.
2230 Delete call to as_bad, return error message to caller.
2231 (m32r_cgen_asm_hash_keywords): #if 0 out.
2233 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2235 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2237 [case 'J']: Fix typo in register name.
2239 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2241 * configure.in: Substitute SHLIB_LIBS.
2242 * configure: Rebuild.
2243 * Makefile.in (SHLIB_LIBS): New variable.
2244 ($(SHLIB)): Use $(SHLIB_LIBS).
2246 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2248 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2250 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2252 * disassemble.c (disassembler): Handle m32r.
2254 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2256 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2257 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2258 * Makefile.in (CFILES): Add them.
2259 (ALL_MACHINES): Add them.
2260 (dependencies): Regenerate.
2261 * configure.in (cgen_files): New variable.
2262 (bfd_m32r_arch): Add entry.
2263 * configure: Regenerate.
2265 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2267 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2268 * configure: Rebuild.
2270 * Makefile.in: Rebuild dependencies.
2272 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2274 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2277 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2279 * Branched binutils 2.8.
2281 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2283 * m10200-dis.c: Rename from mn10200-dis.c.
2284 * m10200-opc.c: Rename from mn10200-opc.c.
2285 * m10300-dis.c: Rename from mn10300-dis.c
2286 * m10300-opc.c: Rename from mn10300-opc.c.
2287 * Makefile.in: Update accordingly.
2289 * mips16-opc.c: Add mul and dmul macros.
2291 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2293 * makefile.vms: Update CFLAGS, add clean target.
2295 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2297 * mips-opc.c: Add "wait". From Ralf Baechle
2298 <ralf@gnu.ai.mit.edu>.
2300 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2301 * configure, config.in: Rebuild.
2302 * sysdep.h: Include <stdlib.h> if it exists.
2303 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2305 * Makefile.in: Rebuild dependencies.
2307 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2309 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2310 Andrew Bray <andy@madhouse.demon.co.uk>.
2312 * mips-opc.c: Add cast when setting mips_opcodes.
2314 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2316 * v850-dis.c (disassemble): Fix sign extension problem.
2317 * v850-opc.c (extract_d*): Fix sign extension problems to make
2318 disassembly calculate branch offsets correctly.
2320 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2322 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2324 * mips-opc.c: Add dctr and dctw.
2326 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2328 * d30v-dis.c (print_insn): Change the way signed constants
2331 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2333 * Makefile.in (BFD_H): New variable.
2334 (HFILES): New variable.
2335 (CFILES): Add all C files.
2336 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2337 Delete old dependencies, and build new ones.
2338 * dep-in.sed: New file.
2340 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2342 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2344 start-sanitize-coldfire
2345 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2347 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2350 end-sanitize-coldfire
2351 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2353 * mn10200-opc.c: Change "trap" to "syscall".
2354 * mn10300-opc.c: Add new "syscall" instruction.
2356 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2358 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2359 mulul insns on the coldfire.
2361 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2363 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2364 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2365 (print_insn_little_arm): Likewise.
2367 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2369 Based on patches from H.J. Lu <hjl@lucon.org>:
2370 * i386-dis.c (fetch_data): Add prototype.
2371 * m68k-dis.c (fetch_data): Add prototype.
2372 (dummy_print_address): Add prototype. Make static.
2373 * ppc-opc.c (valid_bo): Add prototype.
2374 * sparc-dis.c (build_hash_table): Add prototype.
2375 (is_delayed_branch, compute_arch_mask): Add prototypes.
2376 (print_insn_sparc): Make several local variables const.
2377 (compare_opcodes): Change arguments to const PTR. Add prototype.
2378 * sparc-opc.c (arg): Change name field to be const.
2379 (lookup_name, lookup_value): Add prototypes. Change table and
2380 name parameters to be const.
2381 (sparc_encode_asi): Change name parameter to be const.
2382 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2383 (sparc_encode_sparclet_cpreg): Likewise.
2384 (sparc_decode_asi): Change return type to be const.
2385 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2386 (sparc_decode_sparclet_cpreg): Likewise.
2388 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2390 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2391 Solaris doesn't like the combined options, and the -f is
2393 (stamp-tshlink, install): Likewise.
2395 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2397 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2400 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2402 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2404 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2406 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2409 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2411 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2413 start-sanitize-tic80
2414 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2416 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2418 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2420 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2423 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2425 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2426 floatformat_to_double to make portable.
2427 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2430 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2432 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2433 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2435 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2437 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2438 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2440 start-sanitize-tic80
2441 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2443 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2444 (OFF_SL_BR_SCALED): ... to this, and added the flag
2445 TIC80_OPERAND_BASEREL to the flags word.
2446 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2450 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2452 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2453 Change mips_opcodes from const array to a pointer,
2454 and change bfd_mips_num_opcodes from const int to int,
2455 so that we can increase the size of the mips opcodes table
2458 start-sanitize-tic80
2459 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2461 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2462 store BITNUM values in the table in one's complement form
2463 to match behavior when assembler is given a raw numeric
2464 value for a BITNUM operand.
2465 * tic80-dis.c (print_operand_bitnum): Ditto.
2468 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2470 * d30v-opc.c: Removed references to FLAG_X.
2472 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2476 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2478 * Makefile.in: Added d30v object files.
2479 * configure: (bfd_d30v_arch) Rebuilt.
2480 * configure.in: (bfd_d30v_arch) Added new case.
2481 * d30v-dis.c: New file.
2482 * d30v-opc.c: New file.
2483 * disassemble.c (disassembler) Add entry for d30v.
2485 start-sanitize-tic80
2486 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2488 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2489 representations for the floating point BITNUM values.
2491 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2493 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2494 in the table in one's complement form, as they appear in the
2496 (tic80_symbol_to_value): Use macros to access predefined
2498 (tic80_value_to_symbol): Ditto.
2499 (tic80_next_predefined_symbol): New function.
2500 * tic80-dis.c (print_operand_bitnum): Remove code that did
2501 one's complement for BITNUM values.
2504 start-sanitize-r5900
2505 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2507 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2510 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2512 * makefile.vms: Remove 8 bit characters. Update to latest
2515 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2517 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2519 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2521 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2522 (IMM24_PCREL): Likewise.
2524 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2526 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2527 address for an extended PC relative instruction that is not a
2530 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2532 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2535 start-sanitize-tic80
2536 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2538 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2539 (tic80_opcodes): Sort entries so that long immediate forms
2540 come after short immediate forms, making it easier for
2541 assembler to select the right one for a given operand.
2544 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2546 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2548 (print_insn_mips16): Likewise.
2550 start-sanitize-r5900
2551 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2553 * mips-opc.c: add r5900.
2556 start-sanitize-tic80
2557 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2559 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2560 a symbol class that restricts translation to just that
2561 class (general register, condition code, etc).
2563 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2565 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2566 and REG_DEST_E for register operands that have to be
2567 an even numbered register. Add REG_FPA for operands that
2568 are one of the floating point accumulator registers.
2569 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2570 (tic80_opcodes): Change entries that need even numbered
2571 register operands to use the new operand table entries.
2572 Add "or" entries that are identical to "or.tt" entries.
2575 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2577 * mips16-opc.c: Add new cases of exit instruction for
2579 * mips-dis.c (print_mips16_insn_arg): Display floating point
2580 registers in operands of exit instruction. Print `$' before
2581 register names in operands of entry and exit instructions.
2583 start-sanitize-tic80
2584 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2586 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2587 pairs for all predefined symbols recognized by the assembler.
2588 Also used by the disassembling routines.
2589 (tic80_symbol_to_value): New function.
2590 (tic80_value_to_symbol): New function.
2591 * tic80-dis.c (print_operand_control_register,
2592 print_operand_condition_code, print_operand_bitnum):
2593 Remove private tables and use tic80_value_to_symbol function.
2596 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2598 * d10v-dis.c (print_operand): Change address printing
2599 to correctly handle PC wrapping. Fixes PR11490.
2601 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2603 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2606 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2608 * mips-dis.c (print_insn_mips16): Set insn_info information.
2609 (print_mips16_insn_arg): Likewise.
2611 * mips-dis.c (print_insn_mips16): Better handling of an extend
2612 opcode followed by an instruction which can not be extended.
2614 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2616 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2617 coldfire moveb instruction to not allow an address register as
2618 destination. Although the documentation does not indicate that
2619 this is invalid, experiments uncovered unexpected behavior.
2620 Added a comment explaining the situation. Thanks to Andreas
2621 Schwab for pointing this out to me.
2623 start-sanitize-tic80
2624 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2626 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2627 entries are presorted so that entries with the same mnemonic are
2628 adjacent to each other in the table. Sort the entries for each
2629 instruction so that this is true.
2632 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2634 * m68k-dis.c: Include <libiberty.h>.
2635 (print_insn_m68k): Sort the opcode table on the most significant
2636 nibble of the opcode.
2638 start-sanitize-tic80
2639 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2641 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2642 "vsub", "vst", "xnor", and "xor" instructions.
2643 (V_a1): Renamed from V_a, msb of accumulator reg number.
2644 (V_a0): Add macro, lsb of accumulator reg number.
2646 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2648 * tic80-dis.c (print_insn_tic80): Broke excessively long
2649 function up into several smaller ones and arranged for
2650 the instruction printing function to be callable recursively
2651 to print vector instructions that have both a load and a
2652 math instruction packed into a single opcode.
2653 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2654 to explain why it comes after the other vector opcodes.
2657 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2659 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2660 move insns to handle immediate operands.
2662 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2664 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2665 fix operand mask in the "moveml" entries for the coldfire.
2667 start-sanitize-tic80
2668 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2670 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2671 New macros for building vector instruction opcodes.
2672 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2673 FMT_LI, which were unused. The field is now a flags field.
2674 Remove some opcodes that are possible, but illegal, such
2675 as long immediate instructions with doubles for immediate
2676 values. Add "vadd" and "vld" instructions.
2678 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2680 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2681 the order more logical. Move the shift alias instructions ("rotl",
2682 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2683 interspersed with the regular sr.x and sl.x instructions. Add
2684 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2685 "sub", "subu", "swcr", and "trap".
2687 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2689 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2690 (OFF_SL_PC): Renamed from OFF_SL.
2691 (OFF_SS_BR): New operand type for base relative operand.
2692 (OFF_SL_BR): New operand type for base relative operand.
2693 (REG_BASE): New operand type for base register operand.
2694 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2695 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2696 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2698 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2699 10 char field, padded with spaces on rhs, rather than a string
2700 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2701 than old TIC80_OPERAND_RELATIVE. Add support for new
2702 TIC80_OPERAND_BASEREL flag bit.
2704 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2706 * tic80-dis.c (print_insn_tic80): Print floating point operands
2708 * tic80-opc.c (SPFI): Add single precision floating point
2709 immediate operand type.
2710 (ROTATE): Add rotate operand type for shifts.
2711 (ENDMASK): Add for shifts.
2712 (n): Macro for the 'n' bit.
2713 (i): Macro for the 'i' bit.
2714 (PD): Macro for the 'PD' field.
2715 (P2): Macro for the 'P2' field.
2716 (P1): Macro for the 'P1' field.
2717 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2721 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2723 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2724 adding in current address for pc-relative operands.
2726 start-sanitize-tic80
2727 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2729 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2730 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2731 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2732 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2733 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2734 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2735 (REG_SCALED, LSI_SCALED): New operand types.
2736 (E): New macro for 'E' bit at bit 27.
2737 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2738 opcodes, including the various size flavors (b,h,w,d) for
2739 the direct load and store instructions.
2741 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2743 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2745 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2746 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2747 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2748 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2749 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2750 masks with "MASK_* & ~M_*" to get the M bit reset.
2751 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2753 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2755 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2756 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2757 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2759 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2760 CC, SICR, and LICR table entries.
2761 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2762 "bcnd", and "brcr" opcodes.
2765 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2767 * ppc-opc.c (powerpc_operands): Make comment match the
2768 actual fields (no shift field).
2769 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2770 start-sanitize-tic80
2771 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2772 partial implementation, work in progress.
2773 * tic80-opc.c (tic80_operands): Begin construction operands table.
2774 (tic80_opcodes): Continue populating opcodes table and start
2775 filling in the operand indices.
2776 (tic80_num_opcodes): Add this.
2779 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2781 * m68k-opc.c: Add #B case for moveq.
2783 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2785 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2786 before they are used.
2788 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2790 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2791 for "breakpoint" instruction.
2793 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2795 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2796 (dep): Use ALL_CFLAGS rather than CFLAGS.
2798 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2800 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2803 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2805 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2806 start-sanitize-tic80
2807 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2810 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2812 * mips16-opc.c: Add "abs".
2814 start-sanitize-tic80
2815 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2817 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2818 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2819 (disassembler): Add bfd_arch_tic80 support to set disassemble
2820 to print_insn_tic80.
2821 * tic80-dis.c (print_insn_tic80): Add stub.
2823 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2825 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2826 * configure: Regenerate with autoconf.
2827 * tic80-dis.c: Add file.
2828 * tic80-opc.c: Add file.
2831 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2833 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2835 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2837 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2838 (mn10200_opcodes): Use it for some logicals and btst insns.
2839 Add "break" and "trap" instructions.
2841 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2843 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2845 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2847 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2848 relative load or add now depends upon whether the instruction is
2851 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2853 * mn10200-dis.c: Finish writing disassembler.
2854 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2855 Fix mask for "jmp (an)".
2857 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2858 handle endianness issues for mn10300.
2860 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2862 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2864 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2865 instruction. Fix opcode field for "movb (imm24),dn".
2867 * mn10200-opc.c (mn10200_operands): Fix insertion position
2870 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2872 * mn10200-opc.c: Create mn10200 opcode table.
2873 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2874 but moving along nicely.
2876 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2878 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2880 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2882 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2883 specifiers for fmovem* instructions.
2885 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2887 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2889 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2891 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2894 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2896 * mn10300-opc.c: Add some comments explaining the various
2899 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2901 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2903 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2906 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2907 operand specifiers in fmovm* instructions.
2909 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2911 * ppc-opc.c (insert_li): Give an error if the offset has the two
2912 least significant bits set.
2914 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2916 * mips-dis.c (print_insn_mips16): Separate the instruction from
2917 the arguments with a tab, not a space.
2919 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2921 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2924 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2927 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2929 * configure: Rebuild with autoconf 2.12.
2931 Add support for mips16 (16 bit MIPS implementation):
2932 * mips16-opc.c: New file.
2933 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2934 (mips16_reg_names): New static array.
2935 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2936 after seeing a 16 bit symbol.
2937 (print_insn_little_mips): Likewise.
2938 (print_insn_mips16): New static function.
2939 (print_mips16_insn_arg): New static function.
2940 * mips-opc.c: Add jalx instruction.
2941 * Makefile.in (mips16-opc.o): New target.
2942 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2943 * configure: Rebuild.
2945 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2947 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2948 operand specifiers in *save, *restore and movem* instructions.
2950 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2953 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2954 register operands for immediate arithmetic, not, neg, negx, and
2955 set according to condition instructions.
2957 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2958 specifier of the effective-address operand in immediate forms of
2959 arithmetic instructions. The specifier for the immediate operand
2960 notes how and where the constant will be stored.
2962 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2964 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2967 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2970 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2972 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2974 * mn10300-dis.c (disassemble): Handle register lists.
2976 * mn10300-opc.c: Fix handling of register list operand for
2977 "call", "ret", and "rets" instructions.
2979 * mn10300-dis.c (disassemble): Print PC-relative and memory
2980 addresses symbolically if possible.
2981 * mn10300-opc.c: Distinguish between absolute memory addresses,
2982 pc-relative offsets & random immediates.
2984 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2986 (disassemble): Handle SPLIT and EXTENDED operands.
2988 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10300-dis.c: Rough cut at printing some operands.
2992 * mn10300-dis.c: Start working on disassembler support.
2993 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2995 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2997 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2999 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3001 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3003 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3005 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3006 register argument is calls and jmp instructions.
3008 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3010 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3011 getx operand. Fix opcode for mulqu imm,dn.
3013 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3015 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3016 in MN10300_OPERAND_SPLIT operands for how many bits
3017 appear in the basic insn word. Add IMM32_HIGH24,
3018 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3019 (mn10300_opcodes): Use new operands as needed.
3021 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3022 for bset, bclr, btst instructions.
3023 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3025 * mn10300-opc.c (mn10300_operands): Remove many redundant
3026 operands. Update opcode table as appropriate.
3027 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3028 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3030 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3032 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3033 operands (for indexed load/stores). Fix bitpos for DI
3034 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3035 few instructions that insert immediates/displacements in the
3036 middle of the instruction. Add IMM8E for 8 bit immediate in
3037 the extended part of an instruction.
3038 (mn10300_operands): Use new opcodes as appropriate.
3040 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3042 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3043 sequential so the assembler never parallelizes it with
3046 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3048 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3049 a data/address register that appears in register field 0
3050 and register field 1.
3051 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3053 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3055 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3056 standard disassembly.
3058 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3059 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3060 Recategorize PALcode instructions.
3062 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3064 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3066 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3068 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3069 there are no operand types.
3071 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3073 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3075 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3077 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3079 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3081 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3083 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3084 and sst.w instructions.
3086 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3089 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3091 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3094 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3096 * ppc-opc.c (PPCPWR2): Define.
3097 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3100 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3102 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3103 field for movhu instruction.
3105 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3106 cast value to "long" not "signed long" to keep hpux10
3109 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3111 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3114 * mn10300-opc.c (FMT*): Remove definitions.
3116 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3117 for shift-by-register opcodes.
3119 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3120 into [AD][MN][01] for encoding the position of the register
3123 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3125 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3126 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3128 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3130 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3131 Fix various typos. Add "PAREN" operand.
3132 (MEM, MEM2): Define.
3133 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3134 operands. Fix several typos.
3136 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3139 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3141 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3142 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3144 (mn10300_opcodes): Break opcode format out into its own field.
3145 Update many operand fields to deal with signed vs unsigned
3146 issues. Fix one or two typos in the "mov" instruction
3147 opcode, mask and/or operand fields.
3149 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3151 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3152 m68851 wasn't reset.
3154 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3156 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3157 all opcodes. Very rough cut at operands for all opcodes.
3159 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3162 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3164 * mn10200-opc.c, mn10300-opc.c: New files.
3165 * mn10200-dis.c, mn10300-dis.c: New files.
3166 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3167 * disassemble.c: Break mn10x00 support into 10200 and 10300
3169 * configure.in: Likewise.
3170 * configure: Rebuilt.
3172 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3174 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3176 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3178 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3180 * disassemble (ARCH_mn10x00): Define.
3181 (disassembler): Handle bfd_arch_mn10x00.
3182 * configure.in: Recognize bfd_mn10x00_arch.
3183 * configure: Rebuilt.
3185 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3187 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3188 accordingly. Don't declare functions using op_rtn.
3190 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3192 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3193 params to be more standard.
3194 * (disassemble): Print absolute addresses and symbolic names for
3195 branch and jump targets.
3196 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3198 * (v850_opcodes): Add breakpoint insn.
3200 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3202 * m68k-opc.c: Move the fmovemx data register cases before the
3203 other cases, so that they get recognized before the data register
3204 does gets treated as a degenerate register list.
3206 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3208 * mips-opc.c: Add a case for "div" and "divu" with two registers
3209 and a destination of $0.
3211 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3213 * mips-dis.c (print_insn_arg): Add prototype.
3214 (_print_insn_mips): Ditto.
3216 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3218 * mips-dis.c (print_insn_arg): Print condition code registers as
3221 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3223 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3225 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3227 * v850-dis.c (disassemble): Make static. Provide prototype.
3229 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3231 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3234 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3236 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3237 ']' characters into the output stream.
3238 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3239 Add "memop" field to all opcodes (for the disassembler).
3240 Reorder opcodes so that "nop" comes before "mov" and "jr"
3241 comes before "jarl".
3243 * v850-dis.c (print_insn_v850): Fix typo in last change.
3245 * v850-dis.c (print_insn_v850): Properly handle disassembling
3246 a two byte insn at the end of a memory region when the memory
3247 region's size is only two byte aligned.
3249 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3251 * v850-dis.c (v850_reg_names): Define.
3252 (v850_sreg_names, v850_cc_names): Likewise.
3253 (disassemble): Very rough cut at printing operands (unformatted).
3255 * v850-opc.c (BOP_MASK): Fix.
3256 (v850_opcodes): Fix mask for jarl and jr.
3258 * v850-dis.c: New file. Skeleton for disassembler support.
3259 * Makefile.in Remove v850 references, they're not needed here.
3260 * configure.in: Add v850-dis.o when building v850 toolchains.
3261 * configure: Rebuilt.
3262 * disassemble.c (disassembler): Call v850 disassembler.
3264 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3265 (insert_d8_6, extract_d8_6): New functions.
3266 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3267 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3269 (IF4A, IF4B): Use "D7" instead of "D7S".
3270 (IF4C, IF4D): Use "D8_7" instead of "D8".
3271 (IF4E, IF4F): New. Use "D8_6".
3272 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3273 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3275 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3276 (v850_operands): Change D16 to D16_15, use special insert/extract
3277 routines. New new D16 that uses the generic insert/extract code.
3278 (IF7A, IF7B): Use D16_15.
3279 (IF7C, IF7D): New. Use D16.
3280 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3282 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3283 message. Issue an error if the branch offset is odd.
3285 * v850-opc.c: Add notes about needing special insert/extract
3286 for all the load/store insns, except "ld.b" and "st.b".
3288 * v850-opc.c (insert_d22, extract_d22): New functions.
3289 (v850_operands): Use insert_d22 and extract_d22 for
3291 (insert_d9): Fix range check.
3293 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3295 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3296 and set bits field to D9 and D22 operands.
3298 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3300 * v850-opc.c (v850_operands): Define SR2 operand.
3301 (v850_opcodes): "ldsr" uses R1,SR2.
3303 * v850-opc.c (v850_opcodes): Fix opcode specs for
3304 sld.w, sst.b, sst.h, sst.w, and nop.
3306 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3308 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3309 end of the opcode table.
3311 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3313 * d10v-opc.c (pre_defined_registers): Added register pairs,
3314 "r0-r1", "r2-r3", etc.
3316 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3318 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3319 Create I16U for an unsigned 16bit mmediate operand.
3320 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3322 * v850-opc.c (v850_operands): Define EP operand.
3323 (IF4A, IF4B, IF4C, IF4D): Use EP.
3325 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3326 with immediate operand, "movhi". Tweak "ldsr".
3328 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3329 correct. Get sld.[bhw] and sst.[bhw] closer.
3331 * v850-opc.c (v850_operands): "not" is a two byte insn
3333 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3335 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3337 * v850-opc.c (two): Get order of words correct.
3339 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3341 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3342 register source and destination operands.
3343 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3345 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3346 same thinko in "trap" opcode.
3348 * v850-opc.c (v850_opcodes): Add initializer for size field
3351 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3352 Add D8 for 8-bit unsigned field in short load/store insns.
3353 (IF4A, IF4D): These both need two registers.
3354 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3355 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3356 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3357 for "ldsr" and "stsr".
3358 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3361 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3362 short store word (sst.w).
3364 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3366 * v850-opc.c (v850_operands): Added insert and extract fields,
3367 pointers to functions that handle unusual operand encodings.
3369 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3371 * v850-opc.c (v850_opcodes): Enable "trap".
3373 * v850-opc.c (v850_opcodes): Fix order of displacement
3374 and register for "set1", "clr1", "not1", and "tst1".
3376 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3378 * v850-opc.c (v850_operands): Add "B3" support.
3379 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3382 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3384 * v850-opc.c: Close unterminated comment.
3386 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3388 * v850-opc.c (v850_operands): Add flags field.
3389 (v850_opcodes): add move opcodes.
3391 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3393 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3394 * configure: (bfd_v850v_arch) Add new case.
3395 * configure.in: (bfd_v850_arch) Add new case.
3396 * v850-opc.c: New file.
3398 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3400 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3402 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3404 * d10v-opc.c: Add additional information to the opcode
3405 table to help determinine which instructions can be done
3408 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3410 * mpw-make.sed: Update editing of include pathnames to be
3413 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3415 * arm-opc.h: Added "bx" instruction definition.
3417 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3419 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3421 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3423 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3425 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3427 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3429 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3431 * makefile.vms: Update for alpha-opc changes.
3433 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3435 * i386-dis.c (print_insn_i386): Actually return the correct value.
3436 (ONE, OP_ONE): #ifdef out; not used.
3438 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3440 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3441 Changed subi operand type to treat 0 as 16.
3443 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3445 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3448 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3450 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3451 memory transfer instructions. Add new format string entries %h and %s.
3452 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3455 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3457 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3458 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3460 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * alpha-dis.c (print_insn_alpha_osf): Remove.
3463 (print_insn_alpha_vms): Remove.
3464 (print_insn_alpha): Make globally visible. Chose the register
3465 names based on info->flavour.
3466 * disassemble.c: Always return print_insn_alpha for the alpha.
3468 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3470 * d10v-dis.c (dis_long): Handle unknown opcodes.
3472 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3474 * d10v-opc.c: Changes to support signed and unsigned numbers.
3475 All instructions with the same name that have long and short forms
3476 now end in ".l" or ".s". Divs added.
3477 * d10v-dis.c: Changes to support signed and unsigned numbers.
3479 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3481 * d10v-dis.c: Change all functions to use info->print_address_func.
3483 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3485 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3486 move ccr/sr insns more strict so that the disassembler only
3487 selects them when the addressing mode is data register.
3489 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3490 * d10v-opc.c (pre_defined_registers): Declare.
3491 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3492 to pick a better name for the registers.
3494 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3496 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3497 operands for fexpand and fpmerge. From Christian Kuehnke
3498 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3500 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3502 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3503 print routine. Take new regnames and cpumask arguments.
3504 Kill the environment variable nonsense.
3505 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3506 (print_insn_alpha_vms): New function. Do VMS style regnames.
3507 * disassemble.c (disassembler): Test bfd flavour to pick
3508 between OSF and VMS routines. Default to OSF.
3510 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3512 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3513 * configure: Rebuild.
3514 * Makefile.in (install): Use @INSTALL_SHLIB@.
3516 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3518 * configure: (bfd_d10v_arch) Add new case.
3519 * configure.in: (bfd_d10v_arch) Add new case.
3520 * d10v-dis.c: New file.
3521 * d10v-opc.c: New file.
3522 * disassemble.c (disassembler) Add entry for d10v.
3524 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3526 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3527 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3529 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3531 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3532 distinguish between variants of the instruction set.
3533 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3534 distinguish between variants of the instruction set.
3536 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3538 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3539 the 8086 instruction set.
3540 * i386-dis.c: General cleanups. Make most things static. Add
3541 prototypes. Get rid of static variables aflags and dflags. Pass
3542 them as args (to almost everything).
3544 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3546 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3548 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3550 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3551 if the next arg is marked with SRC_IN_DST. Gross.
3553 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3554 we're looking for and find EXR.
3556 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3557 if we're looking for KBIT and we don't find it.
3559 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3562 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3563 3bit immediate operands.
3565 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3567 * Released binutils 2.7.
3569 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3570 <kkaempf@progis.ac-net.de>.
3572 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3574 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3576 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3578 * sparc-dis.c (print_insn_sparclite): New routine to print
3579 sparclite instructions.
3581 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3583 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3585 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3587 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3588 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3589 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3591 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3593 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3594 Use autoconf-set values.
3595 (docdir, oldincludedir): Removed.
3596 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3598 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3600 * alpha-opc.c: New file.
3601 * alpha-opc.h: Remove.
3602 * alpha-dis.c: Complete rewrite to use new opcode table.
3603 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3604 * configure: Rebuild with autoconf 2.10.
3605 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3606 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3608 (alpha-opc.o): New target.
3610 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3612 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3613 Set imm_added_to_rs1 even if the source and destination register
3616 * sparc-opc.c: Add some two operand forms of the wr instruction.
3618 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3620 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3623 * disassemble.c (disassembler): Handle H8/S.
3624 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3626 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3628 * sparc-opc.c: Add beq/teq as aliases for be/te.
3630 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3631 <sergei@msil.sps.mot.com>.
3633 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3635 * makefile.vms: New file.
3637 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3639 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3641 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3644 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3646 * i386-dis.c (OP_OFF): Call append_prefix.
3648 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3650 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3651 unsigned long to silence a warning from the Solaris PowerPC
3654 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3656 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3658 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3660 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3662 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3663 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3664 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3665 cpush, cpusha, cpull sparclet insns.
3667 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3669 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3671 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3673 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3674 Set F_FLOAT on other floating point instructions.
3676 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3678 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3680 (powerpc_opcodes): Add 860/821 specific SPRs.
3682 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3684 * configure.in: Permit --enable-shared to specify a list of
3685 directories. Set and substitute BFD_PICLIST.
3686 * configure: Rebuild.
3687 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3688 uses. Set to @BFD_PICLIST@.
3690 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3692 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3693 not "abs", which may be needed for the absolute in something
3694 like btst #0,@10:8. Print L_3 immediates separately from other
3695 immediates. Change ABSMOV reference to ABS8MEM.
3697 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3699 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3700 (current_arch_mask): New static global.
3701 (compute_arch_mask): New static function.
3702 (print_insn_sparc): Delete sparc_v9_p. New static local
3703 current_mach. Resort opcode table if current_mach changes.
3704 Generalize "insn not supported" test.
3705 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3706 Delete test for v9/!v9.
3707 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3709 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3710 (brfcx): Renamed to FBRX.
3711 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3712 coprocessor mnemonics are not supported on the sparclet).
3713 (condf): Renamed to CONDF.
3714 (SLCBCC2): Delete F_ALIAS flag.
3716 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3718 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3719 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3721 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3723 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3724 that the shared library version number is set correctly.
3726 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3728 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3729 Miles Bader <miles@gnu.ai.mit.edu>.
3730 * configure: Rebuild.
3732 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3734 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3737 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3739 * configure: Rebuild with autoconf 2.8.
3741 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3743 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3744 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3746 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3748 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3749 since they appear as targets in Makefile.in.
3750 * configure: Rebuild.
3752 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3754 * mpw-make.sed: Edit out shared library support bits.
3756 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3758 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3759 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3760 (sparc_opcodes): Add sparclet insns.
3761 (sparclet_cpreg_table): New static local.
3762 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3763 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3765 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3767 * i386-dis.c (index16): New static variable.
3768 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3770 (OP_indirE): Return result of OP_E.
3771 (OP_E): Check for 16 bit addressing mode, and disassemble
3772 correctly. Optimised 32 bit case a little. Don't print
3773 "(base,index,scale)" when sib specifies only an offset.
3775 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3777 * configure.in: Set and substitute SHLIB_DEP.
3778 * configure: Rebuild.
3779 * Makefile.in (SHLIB_DEP): New variable.
3780 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3781 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3782 COMMON_SHLIB, add them to piclist with appropriate modifications.
3783 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3784 here: just use piclist.
3786 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3788 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3789 (print_insn_sparc): Rewrite v9/not-v9 tests.
3790 (compare_opcodes): Likewise.
3791 * sparc-opc.c (MASK_<ARCH>): Define.
3792 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3793 (sparclet,v6notv9): Define.
3794 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3795 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3797 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3799 * configure.in: Call AC_PROG_CC before configure.host.
3800 * configure: Rebuild.
3802 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3804 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3806 * i386-dis.c (onebyte_has_modrm): New static array.
3807 (twobyte_has_modrm): New static array.
3808 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3810 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3812 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3815 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3817 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3820 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3822 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3823 m68010up, not just m68020up | cpu32.
3825 * Makefile.in (SONAME): New variable.
3826 ($(SHLINK)): Make a link to the transformed name, as well.
3827 (stamp-tshlink): New target.
3828 (install): Skip stamp-tshlink during install.
3830 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3832 * configure.in: Call AC_ARG_PROGRAM.
3833 * configure: Rebuild.
3834 * Makefile.in (program_transform_name): New variable.
3835 (install): Transform library name before installing it.
3837 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3839 * i960-dis.c (mem): Add HX dcinva instruction.
3841 Support for building as a shared library, based on patches from
3842 Alan Modra <alan@spri.levels.unisa.edu.au>:
3843 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3844 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3845 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3846 * configure: Rebuild.
3847 * Makefile.in (ALLLIBS): New variable.
3848 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3849 (COMMON_SHLIB, SHLINK): New variables.
3850 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3851 (STAGESTUFF): Remove variable.
3852 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3853 (stamp-piclist, piclist): New targets.
3854 ($(SHLIB), $(SHLINK)): New targets.
3855 ($(OFILES)): Depend upon stamp-picdir.
3856 (disassemble.o): Build twice if PICFLAG is set.
3857 (MOSTLYCLEAN): Add pic/*.o.
3858 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3859 (distclean): Remove pic and stamp-picdir.
3860 (install): Install shared libraries.
3861 (stamp-picdir): New target.
3863 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3865 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3866 Print unknown instruction as "unknown", rather than in hex.
3868 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3870 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3872 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3874 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3876 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3878 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3879 when necessary. From Ulrich Drepper
3880 <drepper@myware.rz.uni-karlsruhe.de>.
3882 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3884 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3885 sparc_num_opcodes. Update architecture enum values.
3886 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3887 (sparc_opcode_lookup_arch): New function.
3888 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3889 (sparc_opcodes): Add v9a shutdown insn.
3891 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3893 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3894 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3896 (print_insn_sparc64): Deleted.
3897 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3900 * sparc-opc.c (architecture_pname): Add v9a.
3902 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3904 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3905 incorrectly defined as 0x16 when it should be 0x15.
3906 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3907 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3908 excb (exception barrier) which is defined in the Alpha
3909 Architecture Handbook version 2.
3910 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3911 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3912 disassembled as or, for example.
3914 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3916 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3917 (_print_insn_mips): Change i from int to unsigned int.
3919 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3921 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3922 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3924 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3926 * i386-dis.c: Added Pentium Pro instructions.
3928 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3930 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3933 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3935 * sh-opc.h (sh_nibble_type): Added REG_B.
3936 (sh_arg_type): Added A_REG_B.
3937 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3939 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3941 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3943 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3945 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3947 * Makefile.in (distclean): Remove stamp-h. From Ronald
3948 F. Guilmette <rfg@monkeys.com>.
3950 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3952 From David Mosberger-Tang <davidm@azstarnet.com>:
3953 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3956 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3958 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3959 (sh_table): Added many SH3 opcodes.
3960 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3962 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3964 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3965 (subco,subco.): Mark this PPC, not PPCCOM.
3967 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3969 * configure: Rebuild with autoconf 2.7.
3971 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * configure: Rebuild with autoconf 2.6.
3975 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3977 * configure.in: Sort list of architectures. Accept but do nothing
3978 for alliant, convex, pyramid, romp, and tahoe.
3980 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3982 * a29k-dis.c (print_special): Change num to unsigned int.
3984 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3986 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3989 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3992 * configure: Rebuilt.
3994 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3996 * configure.in: Add case for bfd_i860_arch.
3997 * configure: Rebuild.
3999 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4001 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4002 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4003 (NEXTDOUBLE): Likewise.
4004 (print_insn_m68k): Don't match fmoveml if there is more than one
4005 register in the list.
4006 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4008 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4010 * m68k-opc.c: Use #W rather than #w.
4011 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4013 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4015 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4016 and likewise for all the dbxx opcodes.
4018 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4020 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4022 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4024 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4025 the VR4100 specific instructions to the mips_opcodes structure.
4027 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4029 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4030 ugly Metrowerks bug in CW6, is fixed in CW7.
4032 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4034 * ppc-opc.c (whole file): Add flags for common/any support.
4036 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4038 * Makefile.in (BISON): Remove macro.
4039 (FLAGS_TO_PASS): Remove BISON.
4041 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4043 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4045 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4046 instructions that take no args by looking at the match mask.
4047 (print_insn_arg): Always print "%" before register names.
4048 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4049 [case '_']: Don't print "@#" before address.
4050 [case 'J']: Use "%s" as format string, not register name.
4051 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4053 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4055 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4058 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4060 From David Mosberger-Tang <davidm@azstarnet.com>
4062 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4063 (alpha_insn_set): added definitions for VAX floating point
4064 instructions (Unix compilers don't generate these, but handcoded
4065 assembly might still use them).
4067 * alpha-dis.c (print_insn_alpha): added support for disassembling
4068 the miscellaneous instructions in the Alpha instruction set.
4070 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4072 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4073 no longer create sysdep.h, sed ppc-opc.c to work around a
4074 serious Metrowerks C bug.
4075 * mpw-make.in: Remove.
4076 * mpw-make.sed: New file, used by mpw-configure to edit
4077 Makefile.in into an MPW makefile.
4079 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4081 * Makefile.in (maintainer-clean): New synonym for realclean.
4083 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4086 which use '0', '1', and '2' instead. Specify the proper size for
4087 a pmove immediate operand. Correct the pmovefd patterns to be
4088 moves to a register, not from a register.
4089 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4091 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4093 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4094 %psr, %wim, %tbr as F_NOTV9.
4096 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4098 * Makefile.in (Makefile): Just rebuild Makefile when running
4100 (config.h, stamp-h): New targets.
4101 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4102 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4103 rebuilding config.h.
4104 * configure: Rebuild.
4106 * mips-opc.c: Change unaligned loads and stores with "t,A"
4107 operands to use "t,A(b)".
4109 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4111 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4113 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4115 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4116 until 3 instead of until 2.
4118 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4120 * Makefile.in (ALL_CFLAGS): Define.
4121 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4122 (MOSTLYCLEAN): Add config.log.
4123 (distclean): Don't remove config.log.
4124 * configure.in: Substitute HDEFINES.
4125 * configure: Rebuild.
4127 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4129 * sh-opc.h (sh_arg_type): Add F_FR0.
4130 (sh_table, case fmac): Add F_FR0 as first argument.
4132 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4134 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4136 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4138 * sparc-dis.c: Remove all references to NO_V9.
4140 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * aclocal.m4: Just include ../bfd/aclocal.m4.
4143 * configure: Rebuild.
4145 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4147 * sparc-dis.c (X_DISP19): Define.
4148 (print_insn, case 'G'): Use it.
4149 (print_insn, case 'L'): Sign extend displacement.
4151 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4153 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4154 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4155 host_makefile_frag or frags.
4156 * aclocal.m4: New file.
4157 * configure: Rebuild.
4158 * Makefile.in (INSTALL): Set to @INSTALL@.
4159 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4160 (INSTALL_DATA): Set to @INSTALL_DATA@.
4162 (AR_FLAGS): Set to rc rather than qc.
4163 (CC): Define as @CC@.
4164 (CFLAGS): Set to @CFLAGS@.
4165 (@host_makefile_frag@): Remove.
4166 (config.status): Remove dependency upon @frags@.
4168 * configure.in: ../bfd/config.bfd now just sets shell variables.
4169 Use them rather than looking through target Makefile fragments.
4170 * configure: Rebuild.
4172 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4174 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4176 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4178 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4179 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4182 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4183 (lookup_{name,value}): New functions.
4184 (prefetch_table): New static local.
4185 (sparc_{encode,decode}_prefetch): New functions.
4186 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4188 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4190 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4193 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4195 * sh-dis.c: Correct comment on first line of file.
4197 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4199 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4201 * sparc-opc.c (asi, membar): New static locals.
4202 (sparc_{encode,decode}_{asi,membar}): New functions.
4203 (sparc_opcodes, membar insn): Fix.
4204 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4205 Support decoding of membar masks.
4208 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4210 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4212 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4214 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4215 and likewise for the other branches. Add bhs as an alias for bcc,
4216 and likewise for the size variants. Add dbhs as an alias for
4219 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4221 * sh-opc.h (FP sts instructions): Update to match reality.
4223 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4225 * m68k-dis.c: (fpcr_names): Add % before all register names.
4226 (reg_names): Likewise.
4227 (print_insn_arg): Don't explicitly print % before register names.
4228 Add % before register names in static array names. In case 'r',
4229 print data registers as `@(Dn)', not `Dn@'. When printing a
4230 memory address, don't print @# before it.
4231 (print_indexed): Change base_disp and outer_disp from int to
4232 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4233 syntax. Sign extend 8 byte displacement correctly.
4234 (print_base): Print using MIT syntax. Print zpc when appropriate.
4235 Change parameter disp from int to bfd_vma.
4237 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4240 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4242 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4243 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4244 * sh-opc.h (sh_arg_type): Add new operand types.
4245 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4247 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4249 * Makefile.in (distclean): Remove generated file config.h.
4251 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4253 * Makefile.in (distclean): Remove generated file config.h.
4255 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4257 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4259 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4261 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4262 rather than numopcodes. Use m68k_opcodes rather than removed
4263 opcode function. Don't check F_ALIAS.
4264 (print_insn_arg): Change first parameter to be const char *.
4265 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4266 (m68k-opc.o): New target.
4267 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4268 * configure: Rebuild.
4270 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4272 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4273 (opcode_bits, opcode_hash_table): New variables.
4274 (opcodes_initialized): Renamed from opcodes_sorted.
4275 (build_hash_table): New function.
4276 (is_delayed_branch): Use hash table.
4277 (print_insn): Renamed from print_insn_sparc, made static.
4278 Build and use hash table. If !sparc64, ignore sparc64 insns,
4279 and vice-versa if sparc64.
4280 (print_insn_sparc, print_insn_sparc64): New functions.
4281 (compare_opcodes): Move sparc64 opcodes to end.
4282 Print commutative insns with constant second.
4283 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4285 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4287 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4288 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4289 avoids printing a delay slot in a delay slot.
4290 * sh-opc.h (sh_table): Fully bracket last entry.
4292 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4294 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4296 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4298 * configure.in: Get host_makefile_frag from ${srcdir}.
4300 * configure.in: Autoconfiscated. Check for string[s].h. Create
4301 config.h from config.in. Don't set up sysdep.h link.
4302 * sysdep.h: New file.
4303 * configure, config.in: New files, generated from configure.in.
4304 * Makefile.in: Updated to be processed autoconf-style.
4305 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4306 (Makefile): Depend on config.status.
4307 (config.status): New rule.
4308 * configure.bat: Update Makefile substitutions.
4310 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4312 * mips-opc.c (L1): Define.
4313 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4314 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4317 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4319 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4320 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4321 have multiple add units but only a single logical unit.
4323 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4324 shifted by 18, without any insertion or extraction function.
4325 (insert_cr, extract_cr): Remove.
4327 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4329 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4332 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4334 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4335 * sh-opc.h: Add copyright.
4337 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4339 * Makefile.in (crunch-m68k): Delete extra target accidentally
4340 checked in a while ago.
4342 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4344 * sh-opc.h (sh_table): Add SH3 support.
4346 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4348 * sh-opc.h: Added bsrf and braf.
4350 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4352 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4353 bogus [ls]fm{ea,fd} patterns.
4355 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4356 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4357 initialize it from memory. Make function static.
4358 (print_insn_{big,little}_arm): New functions.
4359 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4360 the correct endianness.
4362 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4364 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4367 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4369 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4370 17th, so that it builds again using GCC as the compiler.
4372 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4374 * mips-dis.c (print_insn_little_mips): Cast return value from
4375 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4376 expects an unsigned long, and that might be fewer words of
4377 argument storage (e.g., if bfd_vma is long long on a 32-bit
4379 (print_insn_big_mips): Likewise with bfd_getb32 value.
4380 (_print_insn_mips): Now static.
4382 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4384 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4385 gcc memory hog problem with initializer is fixed.
4387 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4389 Merge in support for Mac MPW as a host.
4390 (Old change descriptions retained for informational value.)
4392 * mpw-config.in (archname): Compute from the config.
4393 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4395 * mpw-config.in (target_arch): Compute from canonical target.
4396 (m68k, mips, powerpc, sparc): Add architectures.
4397 * mpw-make.in (disassemble.c.o): Add.
4398 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4400 * mpw-config.in (BFD_MACHINES): Set to a default value.
4401 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4403 * mpw-make.in (CSEARCH): Add extra-include to search path.
4405 * mpw-config.in (varargs.h): Don't create.
4406 (sysdep.h): Create using forward-include.
4407 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4409 * mpw-config.in: New file, MPW version of configure.in.
4410 * mpw-make.in: New file, MPW version of Makefile.in.
4412 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4414 * alpha-dis.c (print_insn_alpha): Put empty statement after
4417 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4419 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4420 (low_sign_extend): Likewise.
4421 (get_field): Delete unused function.
4422 (set_field, deposit_14, deposit_21): Likewise.
4424 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4426 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4429 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4431 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4433 * alpha-opc.h (OSF_ASMCODE): define
4434 print pal-code names as defined in App C of the
4435 Alpha Architecture Reference Manual
4437 * alpha-dis.c: cleaned up output
4438 print stylized code forms as defined in App A.4.3 of the
4439 Alpha Architecture Reference Manual
4441 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4443 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4445 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4448 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4450 * m68k-dis.c (opcode): New function. Returns address of opcode
4451 table entry given index, even if the opcode table was split to
4452 work around gcc bugs.
4453 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4455 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4456 (reg_names): Now const.
4457 (print_insn_arg): Arrays cacheFieldName and names now const.
4458 (print_indexed): Array scales now const.
4460 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4462 * ppc-opc.c: Sort recently added instructions by minor opcode
4463 number within major opcode number.
4465 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4467 * hppa-dis.c: Include libhppa.h.
4469 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4471 * mips-opc.c: Change dli to use M_DLI, and add dla.
4473 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4475 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4477 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4479 * mips-opc.c: Add r4650 mul instruction.
4481 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4483 * mips-opc.c: Add uld and usd macros for unaligned double load and
4486 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4488 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4489 mfdcr, mtdcr, icbt, iccci.
4491 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4493 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4494 signed char fields to shorts, more portable.
4496 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4498 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4499 char fields as signed chars, since they may have negative values.
4501 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4503 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4504 (mycroft@netbsd.org).
4506 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4508 From "Logg, Ed" <elogg@ea.com>:
4509 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4510 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4513 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4515 * ppc-opc.c: Changes based on patch from David Edelsohn
4516 <edelsohn@mhpcc.edu>.
4517 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4520 (insert_tbr): New static function.
4521 (extract_tbr): New static function.
4522 (XFXFXM_MASK, XFXM): Define.
4523 (XSPRBAT_MASK, XSPRG_MASK): Define.
4524 (powerpc_opcodes): Add instructions to access special registers by
4525 name. Add mtcr and mftbu.
4527 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4529 * mips-opc.c (P3): Define.
4530 (mips_opcodes): Add mad and madu.
4532 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4534 * configure.in: Add W65 support.
4535 * disassemble.c: Likewise.
4536 * w65-opc.h, w65-dis.c: New files.
4538 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4540 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4543 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4545 * mips-opc.c: Add dli as a synonym for li.
4547 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4549 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4550 print something for reserved opcode values, even if it won't
4553 * mips-dis.c (_print_insn_mips): When initializing, shift right
4554 and mask, to avoid sign extension problems on the Alpha.
4556 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4559 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4561 * sh-opc.h (mov.l gbr): Get direction right.
4562 * sh-dis.c (print_insn_shx): New function.
4563 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4564 print opcodes with right byte order.
4566 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4568 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4569 to avoid conflicts with getopt.
4571 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4573 * hppa-dis.c (print_insn_hppa): Read the instruction using
4574 bfd_getb32, so that it works on a little endian or 64 bit host.
4575 Remove unused local variable op.
4577 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4579 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4580 addu does not work correctly if -mips3.
4582 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4584 * a29k-dis.c (print_special): Add special register names defined
4585 on 29030, 29040 and 29050.
4586 (print_insn): Handle new operand type 'I'.
4588 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4590 * Makefile.in (INSTALL): Use top level install.sh script.
4592 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4594 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4595 that it works on a little endian host.
4597 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4599 * configure.in: Use ${config_shell} when running config.bfd.
4601 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4603 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4605 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4607 * a29k-dis.c (print_insn): Print the opcode.
4609 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4611 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4613 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4615 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4617 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4619 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4620 which store a value into memory.
4622 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4624 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4625 * arm-dis.c, arm-opc.h: New files.
4627 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4629 * Makefile.in (ns32k-dis.o): Add dependency.
4630 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4631 string, not as array of chars.
4633 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4635 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4637 * sparc-opc.c: Added sparclite extended FP operations, and
4638 versions of v9 impdep* instructions permitting specification of
4641 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4643 * i960-dis.c (reg_names): Now const.
4644 (struct sparse_tabent): New type, copied from array type in mem
4646 (ctrl): Local static array ctrl_tab now const.
4647 (cobr): Local static array cobr_tab now const.
4648 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4649 static variable mem_tab no longer explicitly initialized. Changed
4650 mem_init to const array of struct sparse_tabent.
4651 (reg): Local static variable reg_tab no longer explicitly
4652 initialized. Changed reg_init to const array of struct
4654 (ea): Local static array scale_tab now const.
4656 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4659 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4661 * configure.bat: the disassember needs to be enabled for
4662 "objdump -d" to work in djgpp.
4664 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4666 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4667 (invalid_float): Enabled general version, doesn't require running
4668 on ns32k host. Changed to take char* argument, and test for
4669 explicitly specified sizes, instead of using sizeof() on host CPU
4671 (INVALID_FLOAT): Cast first argument.
4672 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4673 list_P032, list_M032): Now const.
4674 (optlist, list_search): Made appropriate arguments now point to
4676 (print_insn_arg): Changed static array of one-character-string
4677 pointers into a static const array of characters; fixed sprintf
4678 statement accordingly.
4680 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4682 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4683 from distribution. A ns32k-dis.c from a previous distribution has
4684 been brought up to date and supports the new interface.
4686 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4688 * configure.in: add bfd_ns32k_arch target support.
4690 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4691 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4693 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4695 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4698 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4700 * h8300-dis.c, mips-dis.c: Don't use true and false.
4702 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4704 * configure.in: Change --with-targets to --enable-targets.
4706 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4708 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4709 opcodes to the first instruction with that opcode, to speed
4710 disassembly of large files. From ralphc@pyramid.com (Ralph
4713 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4715 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4717 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4719 * configure.bat: update to latest makefile.in
4721 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4723 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4724 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4725 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4726 slot insn is in a delay slot.
4727 * z8k-opc.h: (resflg): Fix patterns.
4728 * h8500-opc.h Fix CR insn patterns.
4730 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4732 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4733 "cmpl" before POWER versions, so that gas -many uses them.
4735 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4737 * disassemble.c: New file.
4738 * Makefile.in (OFILES): Add disassemble.o.
4739 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4740 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4741 binutils/configure.in.
4743 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4744 opcode being examined.
4746 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4748 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4749 (insert_ral, insert_ram, insert_ras): New functions.
4750 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4751 RAS for store with update.
4753 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4755 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4756 (edelsohn@npac.syr.edu).
4758 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4760 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4763 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4765 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4767 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * ppc-opc.c (powerpc_operands): The signedp field has been
4770 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4771 instead. Add new operand SISIGNOPT.
4772 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4773 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4774 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4777 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4779 * i386-dis.c (struct private): Renamed to dis_private. `private'
4780 is a reserved word for dynix cc.
4782 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4784 * configure.in: Change error message to refer to bfd/config.bfd
4785 rather than bfd/configure.in.
4787 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4789 * ppc-opc.c: Define POWER2 as short alias flag.
4790 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4793 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * i960-dis.c (print_insn_i960): Don't read a second word for
4796 opcodes 0, 1, 2 and 3.
4798 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4800 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4802 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * m68881-ext.c: Removed; no longer used.
4805 * Makefile.in: Changed accordingly.
4807 * m68k-dis.c (ext_format_68881): Don't declare.
4808 (print_insn_m68k): If an instruction uses place 'i', it uses at
4809 least four fixed bytes.
4810 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4811 extended float, convert to double using floatformat_to_double, not
4812 ieee_extended_to_double, and fetch the data before converting it.
4814 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4817 davidj@ICSI.Berkeley.EDU (David Johnson).
4819 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4822 PowerPC uses bdnz[l][a].
4824 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4826 * dis-buf.c, i386-dis.c: Include sysdep.h.
4828 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4832 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4833 by Motorola PowerPC 601 with PPC_OPCODE_601.
4834 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4835 Disassemble Motorola PowerPC 601 instructions as well as normal
4836 PowerPC instructions.
4838 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4840 * i960-dis.c (reg, mem): Just use a static array instead of
4843 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4845 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4846 condition name index if this is for a negated condition.
4848 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4849 Floating point format for 'H' operand is backwards from normal
4850 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4851 operands (fmpyadd and fmpysub), handle bizarre register
4852 translation correctly for single precision format.
4854 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4855 or 'I' operands if the next format specifier is 'M' (fcmp
4856 condition completer).
4858 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4860 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4861 single number giving a bitmask for the MB and ME fields of an M
4862 form instruction. Change NB to accept 32, and turn it into 0;
4863 also turn 0 into 32 when disassembling. Seperated SH from NB.
4864 (insert_mbe, extract_mbe): New functions.
4865 (insert_nb, extract_nb): New functions.
4866 (SC_MASK): Mask out SA and LK bits.
4867 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4868 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4869 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4870 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4871 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4872 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4873 (powerpc_macros): Define table of macro definitions.
4874 (powerpc_num_macros): Define.
4876 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4877 if PPC_OPERAND_NEXT is set.
4879 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4882 char. Retrieve contents using bfd_getl32 instead of shifting.
4884 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * ppc-opc.c: New file. Opcode table for PowerPC, including
4887 opcodes for POWER (RS/6000).
4888 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4889 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4890 (CFILES): Add ppc-dis.c.
4891 (ppc-dis.o, ppc-opc.o): New targets.
4892 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4894 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4896 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4897 No space before 'u', 'f', or 'N'.
4899 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4901 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4902 farther than we should.
4904 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4906 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4908 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4910 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4912 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4913 needs it, to prevent reading past the end of a section.
4915 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4918 Removed t,A case for la; always use t,A(b) case.
4920 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4922 From Ted Lemen <mellon@pepper.ncd.com>
4923 * mips-dis.c (print_insn_arg): Handle 'k'.
4924 * mips-opc.c: Make cache use k, not t.
4926 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4928 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4929 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4930 FLOAT_FORMAT_CODE to put out floating point register names.
4932 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4934 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4936 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4938 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4940 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4942 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4943 larger than 32. Moved dsxx32 variants first for disassembler.
4945 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4947 * z8kgen.c, z8k-opc.h: Add full lda information.
4949 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4951 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4952 movb instructions. Any necessary space will be emitted by
4953 the code to handle nullification completers.
4955 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4957 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4959 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4961 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4962 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4964 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4966 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4968 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4970 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4971 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4973 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4975 * m88k-dis.c (m88kdis): comment change. Remove space after
4977 (printop): handle new arg types DEC and XREG for m88110.
4979 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4981 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4982 type for absolute branch addresses. Delete special
4983 "ble" and "be" code in 'W' operand code.
4985 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4987 * mips-opc.c: Set hazard information correctly for branch
4988 likely instructions.
4990 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4992 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4993 info->fprintf_func for printing and info->print_address_func for
4996 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4998 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5000 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5002 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5003 Corrected second case of "b" for disassembler.
5005 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5007 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5008 to BFD swapping routines to correspond to BFD name changes.
5010 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5012 * mips-opc.c: Change div machine instruction to be z,s,t rather
5013 than s,t. Change div macro to be d,v,t rather than d,s,t.
5014 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5015 rem and remu which generates only the corresponding div
5016 instruction. This is for compatibility with the MIPS assembler,
5017 which only generates the simple machine instruction when an
5018 explicit destination of $0 is used.
5019 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5021 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5023 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5024 WR_31 hazard for bal, bgezal, bltzal.
5026 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5028 * hppa-dis.c (print_insn_hppa): Use print function
5029 from within the disassemble_info, not fprintf_filtered.
5031 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5033 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5034 Law, law@cs.utah.edu.)
5036 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5038 * mips-opc.c ("absu"): Removed.
5041 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5043 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5044 Changed hazard information to distinguish between memory load
5045 delays and coprocessor load delays.
5047 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5049 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5051 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5053 * configure.in: Don't pass cpu to config.bfd.
5055 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5057 * m88k-dis.c (m88kdis): Make class unsigned.
5059 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5061 * alpha-dis.c (print_insn_alpha): One branch format case was
5062 missing the instruction name.
5064 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5066 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5067 Add the arch-specific auxiliary files.
5068 (OFILES): Remove the arch-specific auxiliary files
5069 and use BFD_MACHINES instead of DIS_LIBS.
5070 * configure.in: Set BFD_MACHINES based on --with-targets option.
5072 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5074 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5077 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5079 * sparc-opc.c: Change CONST to const to deal with gcc
5080 -Dconst=__const -traditional.
5082 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5084 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5085 coprocessor instructions out of #if 0, and made them use new
5088 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5090 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5092 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5094 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5095 instruction, for use by the disassembler.
5097 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5098 hand-coded sign extensions that depended on 32-bit host ints.
5099 FIXME, we still depend on big-endian host bitfield ordering.
5100 (sparc_print_insn): Set the insn_info_valid field, and the
5101 other fields that describe the instruction being printed.
5103 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5105 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5106 `jmp' instead of just one of them.
5108 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5110 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5111 (fput_fp_reg_r): Renamed from fput_reg_r.
5112 (fput_fp_reg): New function.
5113 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5115 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5117 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5119 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5121 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5123 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5124 don't output a space.
5126 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5128 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5130 * mips-opc.c: New file, containing opcode table from
5131 ../include/opcode/mips.h.
5132 * Makefile.in: Add it.
5134 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5136 * m88k-dis.c: New file, moved in from gdb and changed to use the
5137 new dis-asm.h disassembler interface.
5138 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5139 (m88k-dis.o): New target.
5141 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5143 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5144 argument string const char * to correspond to opcode/mips.h.
5146 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5148 * mips-dis.c: Updated to account for name changes in new version
5150 * Makefile.in: Added header file dependencies.
5152 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5154 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5156 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5158 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5159 extend, rather than shifts.
5161 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5163 * Makefile.in: Undo 15 June change.
5165 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5167 * m68k-dis.c (print_insn_arg): Change return value to byte count
5169 * m68k-dis.c: Re-write to detect invalid operands before
5170 printing anything, so we can handle this the same way we
5171 handle invalid opcodes.
5173 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5175 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5177 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5179 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5182 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5184 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5186 * configure.in: Do make sysdep.h link.
5187 * Makefile.in: Search ../include. Don't search ../bfd.
5189 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5191 Changes from Jeff Law, law@cs.utah.edu:
5192 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5193 Do not print a space before the completers specified by
5196 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5198 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5199 defined, since gdb has been fixed.
5201 Changes from Jeff Law, law@cs.utah.edu:
5202 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5203 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5204 be a *disassemble_info, not a *FILE.
5205 * hppa-dis.c: Support 'd', '!', and 'a'.
5206 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5207 * hppa-dis.c: Delete cases which are no longer needed.
5209 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5211 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5213 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5215 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5218 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5220 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5221 * configure.in: No longer need to configure to get sysdep.h.
5223 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5225 * Patches from Jeffrey Law <law@cs.utah.edu>.
5226 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5227 templates for 1.1 FP computational instructions.
5229 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5231 * h8500-dis.c (print_insn_h8500): Address argument is type
5233 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5236 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5237 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5239 * sparc-dis.c (compare_opcodes): Move static declaration to
5242 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5244 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5245 instruction, remove unimp hack from 'l' argument.
5247 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5249 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5252 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5254 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5255 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5258 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5260 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5261 arrays of string pointers to 2-d arrays of chars, to save
5264 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5266 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5267 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5269 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5271 * hppa-dis.c: New file from Utah, adapted to new disassembler
5273 * Makefile.in: Include it.
5275 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5277 * sh-dis.c, sh-opc.h: New files.
5279 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5281 * alpha-dis.c, alpha-opc.h: New files.
5283 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5285 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5288 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5290 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5292 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5294 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5297 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5299 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5300 and double percent signs a few places.
5302 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5304 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5305 Use info->print_address_func not print_address.
5307 * dis-buf.c (generic_print_address): New function.
5309 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5311 * Makefile.in: Add sparc-dis.c.
5312 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5314 Add `add' instruction to the set that get checked
5315 for a preceding `sethi' in order to print an absolute address.
5316 * (print_insn): Disassembly prefers real instructions.
5317 (is_delayed_branch): Speed up.
5318 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5319 Still missing some float ops, and needs testing.
5320 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5321 F_ALIAS. Use printf, not fprintf, when not passing a file
5323 (compare_opcodes): Check that identical instructions have
5324 identical opcodes, complain otherwise.
5327 * Include reg_names.
5329 Use dis-asm.h/read_memory_func interface.
5331 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5333 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5334 deliberately return non-zero to setjmp from longjmp. Otherwise
5335 this code fails to compile.
5337 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5339 * m68k-dis.c: Fix prototype for fetch_arg().
5341 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5343 * dis-buf.c: New file, for new read_memory_func interface.
5344 Makefile.in (OFILES): Include it.
5345 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5346 Use new read_memory_func interface.
5348 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5350 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5351 * h8500-opc.h: Fix couple of opcodes.
5353 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5355 * Makefile.in: add dvi & installcheck targets
5357 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5359 * Makefile.in: Update for h8500-dis.c.
5361 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5363 * h8500-dis.c, h8500-opc.h: New files
5365 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5367 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5368 ../include/dis-asm.h.
5369 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5370 and ../gdb/m68k-pinsn.c).
5371 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5372 and ../gdb/i386-pinsn.c).
5373 * m68881-ext.c: New file. Moved definition of
5374 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5375 * Makefile.in: Adjust for new files.
5376 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5377 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5378 can be dis-assembled.
5380 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5382 * mips-dis.c (print_insn_arg): Now returns void.
5384 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5386 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5387 files that use the macros.
5389 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5391 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5392 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5393 (CFILES): Added mips-dis.c.
5395 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5397 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5398 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5400 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5402 * Makefile.in: Improve *clean rules.
5403 * configure.in: Allow a default host.
5405 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5407 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5408 files include other sysdep files
5410 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5412 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5414 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5416 * configure.in: For host support, use ../bfd/configure.host
5417 so it stays in sync with the ../bfd/hosts database.
5419 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5421 * configure.in: use cpu-vendor-os triple instead of nested cases
5423 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5425 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5426 *always* the wrong one.
5428 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5430 * z8kgen.c: added copyright info
5432 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5434 * z8k-dis.c (unparse_instr): prettier tabs
5435 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5437 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5439 * configure.in: Add ncr* configuration.
5440 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5441 picayune ANSI compilers happy.
5443 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5445 * configure.in (i386): Make i386 and i486 synonymous for now.
5446 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5448 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5450 * Makefile.in (install): Fix typo.
5452 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5454 * Makefile.in (make): Remove obsolete crud.
5455 (sparc-opc.o): Avoid Sun Make VPATH bug.
5457 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5459 * Makefile.in: since there are no SUBDIRS, remove rule and
5460 references of subdir_do.
5462 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5464 * Makefile.in (install): Get the library name right here too.
5465 Don't install bfd.h, since it's unrelated to this library. No
5466 subdirs to recurse into, either.
5467 (CFILES): The source file has a .c suffix, not .o.
5469 * sparc-opc.c: New file, moved from BFD.
5470 * Makefile.in (OFILES): Build it.
5472 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5474 * z8k-dis.c: fixed forward refferences of some declarations.
5476 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5478 * Makefile.in: get the name of the library right
5480 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5482 * z8k-dis.c: knows how to disassemble z8k stuff
5483 * z8k-opc.h: new file full of z8000 opcodes
5487 version-control: never
projects / platform / upstream / binutils.git / blob