1 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
3 * m32r-asm.c: Regenerate.
6 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
8 * configure.in: Added case for bfd_fr30_arch.
9 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
10 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
11 (CLEANFILES): Added stamp-fr30.
13 * fr30-asm.c: New file.
14 * fr30-dis.c: New file.
15 * fr30-opc.c: New file.
16 * fr30-opc.h: New file.
17 * po/POTFILES.in: Regenerated
18 * po/opcodes.pot: Regenerated
22 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
24 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
25 to bcl8,bncl8 entries.
26 (macro_insn_table_entries): Add FILL_SLOT attribute
27 to bcl8r,bncl8r entries.
30 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
32 * configure.in: detect cygwin* instead of cygwin32*
33 * configure: regenerate
35 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
37 * mips-opc.c (IS_M): Added.
40 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
42 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
46 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
49 * cgen-asm.in (insert_1): New function.
50 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
51 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
52 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
53 * cgen-dis.in (extract_1): New function.
54 (extract_normal): buf_ctrl renamed to ex_info, update type.
55 Progress on handling of CGEN_INT_INSN_P.
56 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
57 Update handling of CGEN_INT_INSN_P. Handle errors from
58 @arch@_cgen_extract_operand.
59 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
60 (default_print_insn): Renamed from print_insn.
61 Handle ! CGEN_INT_INSN_P.
62 (print_insn_@arch@): Handle error returns from print_insn.
63 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
64 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
65 (@arch@_cgen_lookup_get_insn_operands): Ditto.
67 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
70 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
72 * m10300-opc.c: Allow autoincrement stores using the same register
73 for source and destination operands.
75 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
77 * m10300-opc.c: DSP instrutions which only write to one general
78 register have no restrictions on matching operands.
80 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
83 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
85 * m32r-opc.h,m32r-opc.c: Regenerate.
88 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
90 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
93 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
95 * i386-dis.c (OP_3DNowSuffix): New static function.
98 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
99 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
100 (insn_codep): New static variable.
101 (print_insn_x86): Init insn_codep after prefixes.
102 (grps): Add GRP14 entries for prefetch, prefetchw.
105 From Jeff B Epler <jepler@usgs.gov>
106 * i386-dis.c (Suffix3DNow): New table.
108 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
110 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
112 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
114 * d10v-dis.c (print_operand): If num is nonzero, then
115 add OPERAND_ACC1, not OPERAND_ACC0.
117 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
119 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
122 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
124 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
128 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
130 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
133 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
135 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
137 start-sanitize-nortel-ppc750
138 1998-09-09 Michael Meissner <meissner@cygnus.com>
140 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
143 end-sanitize-nortel-ppc750
144 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
146 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
148 (print_insn_little_arm): Detect Thumb symbols in elf object
151 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
153 * alpha-dis.c (print_insn_alpha): Use the machine type to
154 decide which PALcode set to include.
156 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
158 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
160 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
162 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
163 MSUB and MSUBS instructions.
166 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
168 * mips-opc.c: Insert contents of vu0.h, rather than including it.
170 * Makefile.am: Rebuild dependencies.
174 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
176 * ppc-opc.c (powerpc_operands): Omit parens around additions in
179 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
181 start-sanitize-coldfire
182 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
183 ColdFire, as below for mulsl and mulul.
185 end-sanitize-coldfire
186 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
187 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
188 +, -, and d for ColdFire.
190 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
191 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
192 (extract_mbe): Likewise.
194 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
196 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
198 * m10300-opc.c: First cut at UDF instructions.
200 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
202 * m32r-opc.c: Regenerate (remove semantic descriptions).
204 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
206 * arm-dis.c (print_insn_big_arm): Fix indentation.
207 (print_insn_little_arm): Likewise.
209 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
211 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
213 (print_insn_little_arm): Likewise.
215 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
217 Move all global state data into opcode table struct, and treat
218 opcode table as something that is "opened/closed".
219 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
220 (cgen_asm_init): Delete.
221 (cgen_set_parse_operand_fn): New function.
222 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
223 (cgen_dis_init): Delete.
224 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
225 (cgen_current_{opcode_table_mach,endian}): Delete.
226 start-sanitize-cygnus
227 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
228 * cgen-dis.in (all fns): Ditto.
229 * cgen-opc.in (all fns): Ditto.
231 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
233 start-sanitize-cygnus
234 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
236 * cgen-dis.in (print_normal): Split into two.
237 (print_address): New function.
238 (extract_insn_normal): Clarify insn_value arg.
239 (print_int_insn): Renamed from print_insn.
240 (print_insn): New arg.
241 (print_insn_@arch@): Open opcode table if not already done so.
242 Move reading of insn into print_insn.
245 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
247 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
251 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
253 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
254 accept an accumulator choice.
255 * m32r-opc.c,m32r-opc.h: Regenerate.
258 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
260 * m10300-opc.c: Add entries for "no_match_operands" field in
264 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
266 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
270 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
272 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
275 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
277 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
279 * m10300-opc.c: Add autoincrement memory loads/stores.
283 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
285 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
286 phmsubh respectively.
289 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
291 start-sanitize-cygnus
292 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
294 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
295 @arch_cgen_get_int_operand.
296 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
297 Update call to @arch@_cgen_insert_operand.
298 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
299 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
300 (extract_insn_normal): New arg `pc', callers updated.
301 Update call to @arch@_cgen_extract_operand.
302 (print_insn): Update call to CGEN_EXTRACT_FN.
304 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
307 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
309 * m10300-opc.c: Fix load to sp and store from sp for the am33.
310 Add more multimedia instructions.
312 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
314 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
319 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
321 * mips-opc.c (pref): Enabled for the r5900.
324 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
326 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
328 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
330 (OP_J): Remove unnecessary subtraction when 16-bit displacement
331 will be masked later.
334 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
336 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
339 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
341 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
342 from raw register #s to symbolic names to make debugging easier.
345 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
347 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
349 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
351 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
352 start-sanitize-cygnus
353 * Makefile.am (CGENDIR): Set via configure.
354 (CGEN): New variable.
355 (CGENFILES): object.scm renamed to cos.scm.
356 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
357 (stamp-m32r): Pass prefix to run-cgen.
358 * Makefile.in: Regenerate.
359 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
360 * cgen-dis.in: Ditto.
361 * cgen-opc.in: Ditto.
362 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
363 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
364 * configure: Regenerate.
368 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
370 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
372 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
374 * m10300-opc.c: Reorder more instructions so that we do not
375 accidentally match a mn10300 instruction when we really
376 wanted an am33 instruction.
379 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
381 * m10300-dis.c: Only recognize instructions from the currently
383 * m10300-opc.c: Add field indicating the particular variant of
384 the mn10300 each instruction is available on.
386 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
388 * configure.in: For bfd_vax_arch, build vax-dis.lo.
389 * Makefile.am: Rebuild dependencies.
390 (CFILES): Add vax-dis.c.
391 (ALL_MACHINES): Add vax-dis.lo.
392 * aclocal.m4: Rebuild with current libtool.
393 * configure, Makefile.in: Rebuild.
395 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
397 * vax-dis.c: New file, from work by Pauline Middelink
398 <middelin@polyware.iaf.nl>.
399 * disassemble.c (ARCH_vax): Define if ARCH_all.
400 (disassembler): Add case for ARCH_vax.
401 * makefile.vms: Support compilation on vms/vax.
404 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
406 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
407 the DVP_OPERAND_RELOC_11_S4 relocation.
411 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
413 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
415 (disassemble): Correctly handle FMT_D10 instructions.
417 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
418 am33 shift instructions.
420 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
422 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
423 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
425 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
426 (mn10300_opcodes): Reorder so as to try and select opcodes from
427 the core chip when multiple alternatives exist. Change several
428 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
429 "macbu" instructions. Fix typos in a couple DSP instructions too.
432 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
434 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
435 related to sign extension and the size of ints.
437 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
439 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
440 instructions. Support (sp) addressing mode by expanding it into
444 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
446 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
447 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
448 be used as immediate values.
452 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
454 * m10300-opc.c: Support 4 byte DSP instructions.
457 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
459 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
462 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
464 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
467 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
469 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
472 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
474 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
475 found on the mn10300.
478 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
480 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
483 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
485 * mips-dis.c (print_insn_little_mips): Previously, instruction
486 printing references the symbol table to determine whether the
487 instruction resides in a block regular instructions or mips16
488 instructions. However, when the disassembler gets used in other
489 environments where the symbol table is not present, we no longer
490 rely in the symbol table, rather, use the low bit of the
491 instructions address to guess. There should be no change for usage
492 of the disassembler in host based programse, gdb ,objdump.
493 (print_insn_big_mips): ditto.
494 (print_insn_mips): ditto
496 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
498 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
500 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
503 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
504 operands for the am33.
505 (mn10300_opcodes): Add new instructions from the am33.
507 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
509 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
511 * i386-dis.c (index16): Add '%' to register names. Use ','
514 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
516 * i386-dis.c: Don't print opcode suffix when we can figure out the
517 size (and gas can!) by register operands, or from the default
519 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
521 (dis386, dis386_twobyte, grps): Use new suffix macros.
522 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
523 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
524 order of cmps operands to agree with Intel docs. Correct operand
525 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
526 agree with Intel docs.
527 (print_insn_x86): Print orphan fwait before other prefixes.
528 Return correct byte count for orphan fwait with prefixes. Don't
529 print `bound' operands in reverse order.
530 (ckprefix): Stop accumulating prefixes if we get fwait.
531 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
533 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
535 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
536 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
538 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
540 Fix problems when bfd_vma is wider than long.
541 * i386-dis.c: Make op_address and start_pc unsigned.
542 (set_op): Make parameter unsigned.
543 (print_insn_x86): Cast to bfd_vma when passing a value to
545 * ns32k-dis.c (CORE_ADDR): Don't define.
546 (print_insn_ns32k): Change type of addr to bfd_vma. Use
547 bfd_scan_vma to read back address.
548 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
550 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
551 (NEXTULONG): New definition.
552 (print_insn_m68k): Avoid overflow when computing third argument of
554 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
555 Use disp instead of val to store offset values.
556 (print_indexed): Use base_disp instead of word to store base
557 displacement, to avoid overflow.
558 * m10300-dis.c (disassemble): Cast value to long when computing
559 pc-relative address, to get correct sign extension.
561 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
563 * m32r-opc.c: Regenerate.
565 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
567 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
568 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
570 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
572 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
574 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
576 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
578 (OP_DSreg): Rename from OP_DSSI.
579 (OP_ESreg): Rename from OP_ESDI.
580 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
582 (append_seg): Rename from append_prefix.
583 (ptr_reg): New function.
584 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
586 (PREFIX_ADDR): Rename from PREFIX_ADR.
587 (float_reg): Add non-broken opcodes for people who don't want
590 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
592 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
595 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
597 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
599 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
601 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
602 0; produce error message for shifts of size 32 (or 64 for 64-bit
603 shifts), because the hardware doesn't support them.
606 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
608 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
611 * vu0.h (sqc2): Fix opcode.
613 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
617 start-sanitize-cygnus
618 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
620 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
621 Change pinfo to use WR_HILO.
624 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
626 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
627 LONG_2, LONG_2b formats to use this new operand.
629 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
631 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
633 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
635 * sparc-dis.c (print_insn_sparc): big endian instruction / little
638 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
640 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
641 and SHORT_B3b formats to use Rb instead of Ra.
643 Add FLAG_MUL16 to MUL2XH opcode.
645 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
646 to existing 1.1.1 parallelisation prohibition procedure.
648 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
650 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
651 * cgen-dis.in (extract_normal): Likewise.
652 * m32r-asm.c,m32r-dis.c: Regenerate.
655 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
657 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
661 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
663 * mips-opc.c (multu1): Add two operand variant for the r5900.
666 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
668 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
669 with a shift count of 0.
672 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
674 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
676 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
678 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
679 (_print_insn_mips): Likewise.
680 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
684 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
686 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
687 (cgen_hw_lookup_by_num): New function.
690 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
693 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
695 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
697 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
699 * sparc-dis.c (print_insn_sparc): Always fetch instructions
700 as big-endian on SPARClite.
703 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
705 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
707 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
711 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
713 * d30v-opc.c (pre_defined_register): Remove alias for r0.
716 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
718 * mips-opc.c (break): Added 20-bit single-operand break
719 instruction for R5900 only.
722 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
724 * po/Make-in (install-info): New target.
726 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
728 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
729 * configure: Rebuild.
731 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
733 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
734 variety of ISA2 instructions to set bottom ten bits of trap code.
736 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
738 * Makefile.am (config.status): Add explicit target so that
739 config.status depends upon bfd/configure.in.
740 * Makefile.in: Rebuild.
742 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
744 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
745 instructions to set bottom ten bits of break code.
746 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
747 for above optional argument.
749 start-sanitize-cygnus
750 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
752 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
753 * m32r-opc.h: Regenerate.
756 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
758 * makefile.vms: Run dec c with /nodebug.
760 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
762 * Makefile.in: Rebuilt.
763 * Makefile.am: Regenerated dependencies with mkdep.
765 * opintl.h (_): Define as dgettext.
767 start-sanitize-cygnus
768 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
770 * configure.in: Add support for --enable-cgen-maint.
771 * Makefile.am (M32R_DEPS): New variable.
772 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
773 * aclocal.m4: Regenerate.
774 * Makefile.in: Regenerate.
775 * configure: Regenerate.
777 * Makefile.am (CGENFILES): Add minsn.scm.
780 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
782 * cgen-asm.c: Internationalised.
783 start-sanitize-cygnus
784 * cgen-asm.in: Internationalised.
785 * cgen-opc.in: Internationalised.
787 * m32r-asm.c: Internationalised.
788 * m32r-dis.c: Internationalised.
789 * m32r-opc.c: Internationalised.
791 * aclocal.m4: Regenerated.
792 * configure: Regenerated.
793 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
794 * Makefile.in: Rebuild.
795 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
796 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
798 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
800 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
802 * aclocal.m4, configure: Rebuild with current tools.
804 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
806 * opintl.h: New file - contains internationalisation macros used
807 by source files in this directory.
808 * po/: New subdirectory - contains internationalisation files.
809 * po/Make-in: New file - Makefile constructor.
810 * po/POTFILES.in: New file - list of files in opcodes directory
811 that should be scan for internationalisation macros.
812 * po/opcodes.pot: New file - list of internationisation strings
813 found in files mentioned in po/POTFILES.in.
814 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
815 entry. Add intl directory to include paths.
816 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
817 HAVE_STRCPY, HAVE_LC_MESSAGES
818 * configure.in: Add rule to build Makefile in po subdirectory.
819 * Makefile.in: Rebuilt.
820 * aclocal.m4: Rebuilt.
821 * config.in: Rebuilt.
822 * configure: Rebuilt.
823 * alpha-opc.c: Internationalised.
824 * arc-dis.c: Internationalised.
825 * arc-opc.c: Internationalised.
826 * arm-dis.c: Internationalised.
827 * cgen-asm.c: Internationalised.
828 * d30v-dis.c: Internationalised.
829 * dis-buf.c: Internationalised.
831 * dvp-dis.c: Internationalised.
832 * dvp-opc.c: Internationalised.
834 * h8300-dis.c: Internationalised.
835 * h8500-dis.c: Internationalised.
836 * i386-dis.c: Internationalised.
837 * m10200-dis.c: Internationalised.
838 * m10300-dis.c: Internationalised.
839 * m68k-dis.c: Internationalised.
840 * m88k-dis.c: Internationalised.
841 * mips-dis.c: Internationalised.
842 * ns32k-dis.c: Internationalised.
843 * opintl.h: Internationalised.
844 * ppc-opc.c: Internationalised.
845 * sparc-dis.c: Internationalised.
846 * v850-dis.c: Internationalised.
847 * v850-opc.c: Internationalised.
849 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
851 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
852 (asm_hash_table_entries): New variable.
853 (cgen_asm_init): Free asm_hash_table_entries.
854 (hash_insn_array,hash_insn_list): New functions.
855 (build_asm_hash_table): Use them. Hash macro insns as well.
856 (cgen_asm_lookup_insn): Update.
857 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
858 (dis_hash_table_entries): New variable.
859 (cgen_dis_init): Free dis_hash_table_entries.
860 (hash_insn_array,hash_insn_list): New functions.
861 (build_dis_hash_table): Use them. Hash macro insns as well.
862 (cgen_dis_lookup_insn): Update.
863 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
864 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
865 (cgen_macro_insn_count): New function.
866 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
867 All callers updated. Sanity check result of extract fn.
868 (@arch@_cgen_get_insn_operands): Change result type to void.
869 Delete args insn_value, length. New arg fields. All callers updated.
870 (@arch@_cgen_lookup_get_insn_operands): New function.
871 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
873 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
875 * i386-dis.c (OP_DSSI): Print segment override.
878 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
880 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
884 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
886 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
890 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
892 * vu0.h (vlqd, vlqi): Update per revised specs.
896 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
898 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
899 (vif_operands): Update.
900 (vif_get_unpackloc): Delete.
901 (state_vif_unpackloc{,_star_p}): Delete.
902 (dvp_opcode_init_parse): Update.
903 (vif_unpack_len_value): Avoid divide by zero.
907 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
909 * vu0.h: Specs changed for VCALLMSR bit pattern.
910 * mips-dis.c: (print_insn_arg) Matching change.
913 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
915 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
918 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
920 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
921 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
922 * configure.in: Define and substitute WIN32LDFLAGS and
924 * aclocal.m4: Rebuild with new libtool.
925 * configure, Makefile.in: Rebuild.
928 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
930 * vu0.h: Corrected bit pattern for VMAXI opcode.
933 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
935 * m32r-opc.c: Regenerate.
938 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
940 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
941 (dvp_expand_macro): Implement.
942 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
943 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
946 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
948 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
949 before trying to copy it.
950 * Makefile.in: Rebuild.
952 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
954 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
957 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
959 * m32r-opc.c: Fix bit patterns for SAT and SATB.
962 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
964 * ns32k-dis.c (bit_extract_simple): New function to extract bits
965 from an arbitrary valid buffer instead of fetching them on demand
967 (invalid_float): use bit_extract_simple() instead of bit_extract().
970 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
972 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
973 * m32r-opc.h: Add extra control registers.
976 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
978 From H.J. Lu <hjl@gnu.org>:
979 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
982 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
984 * Branched binutils 2.9.
986 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
988 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
989 disassembling last 4 bytes of a section.
991 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
993 Fix some gcc -Wall warnings:
994 * arc-dis.c (print_insn): Add casts to avoid warnings.
995 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
996 * d10v-dis.c (dis_long, dis_2_short): Likewise.
998 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
999 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1000 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1001 (parse_ffstreg, parse_vif_mode): Likewise.
1003 * m10200-dis.c (disassemble): Likewise.
1004 * m10300-dis.c (disassemble): Likewise.
1005 * ns32k-dis.c (print_insn_ns32k): Likewise.
1006 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1007 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1008 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1009 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1010 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1012 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1013 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1014 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1016 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1017 start-sanitize-tic80
1018 * tic80-dis.c (print_one_instruction): Likewise.
1020 * w65-dis.c (print_operand): Likewise.
1021 * z8k-dis.c (fetch_data): Likewise.
1022 * a29k-dis.c: Add return type for find_byte_func_type.
1023 * arc-opc.c: Include <stdio.h>. Remove declarations of
1024 insert_multshift and extract_multshift.
1025 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1027 (extract_value): Fully parenthesize expression.
1029 * dvp-opc.c: Include <ctype.h>.
1030 (print_sdest): Add default case to switch.
1032 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1033 * h8500-opc.h (h8500_table): Fully bracket initializer.
1034 * w65-opc.h (optable): Likewise.
1035 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1036 * i386-dis.c (OP_E): Initialize local variables.
1037 * m10200-dis.c (print_insn_mn10200): Likewise.
1038 * mips-dis.c (print_insn_mips16): Likewise.
1039 * sh-dis.c (print_insn_shx): Likewise.
1040 * v850-dis.c (print_insn_v850): Likewise.
1041 * ns32k-dis.c (print_insn_arg): Declare.
1042 (get_displacement, invalid_float): Declare.
1043 (list_search, sign_extend, flip_bytes): Declare return type.
1044 (get_displacement): Likewise.
1045 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1047 (print_insn_ns32k): Make i unsigned.
1048 (invalid_float): Make static. Declare type of val.
1049 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1050 on each for iteration.
1051 * tic30-dis.c (get_indirect_operand): Likewise.
1052 * z8k-dis.c (print_insn_z8001): Declare return type.
1053 (print_insn_z8002): Likewise.
1054 (unparse_instr): Fix sprintf format strings.
1056 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1058 * mips-opc.c: Add "sync.l" and "sync.p".
1061 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1063 * dvp-opc.c (extract_vif_datalen): Rewrite.
1064 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1066 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1068 * dvp-dis.c (print_insn): Print unpack address in hex.
1069 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1070 Don't skip over '*', just record it.
1071 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1072 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1073 Don't skip over '*', just record it.
1074 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1075 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1076 (vif_opcodes): Likewise.
1077 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1078 (vif_macros,vif_macro_count): New globals.
1079 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1080 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1081 (vif_get_wl_cl): New function.
1082 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1085 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1087 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1088 default m68k variant to recognize.
1090 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1091 (ctrl, cobr, mem, ea): Likewise.
1092 (print_addr): Likewise. Remove cast.
1093 (ea): Cast argument of print_addr to bfd_vma.
1095 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1097 (cgen_parse_unsigned_integer): Likewise.
1098 (cgen_parse_address): Likewise.
1100 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1102 * i960-dis.c (ctrl): Add full braces to structure initialization.
1103 (cobr, mem, reg): Likewise.
1104 (ea): Correct parenthesization in expression.
1106 * cgen-asm.c: Include <ctype.h>.
1107 (build_asm_hash_table): Remove unused local variable i.
1108 (cgen_parse_keyword): Add casts to avoid warnings.
1110 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1111 symbol. Fix indentation.
1112 (print_insn_little_arm): Likewise.
1114 start-sanitize-r5900
1115 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1117 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1121 start-sanitize-m32rx
1122 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1124 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1129 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1131 * dvp-opc.c (vif_operand_datalen_special): New global.
1134 start-sanitize-r5900
1135 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1137 * vu0.h (vcallms): Use 'O' for call target operand.
1138 * mips-dis.c (print_insn_arg): Handle 'O'.
1141 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1143 * configure.in: Use AM_DISABLE_SHARED.
1144 * aclocal.m4, configure: Rebuild with libtool 1.2.
1146 start-sanitize-r5900
1147 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1149 * mips-dis.c: Change '%' to '#' in r5900 support.
1153 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1155 These patches are courtesy of Jonathan Walton and Tony Thompson
1156 (athompso@cambridge.arm.com).
1158 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1161 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1162 both the offset and the label closest to the destination.
1164 start-sanitize-r5900
1165 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1167 * vu0.h: New file with cop2/vu0 instructions.
1168 * mips-opc.c: Include vu0.h.
1169 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1171 (print_insn_mips): Do not emit a tab after an instruction if the
1172 first arg is an instruction completer (&). If the next arg is an
1173 escape character (%), then print the next arg verbatim.
1174 * Makefile.am (mips-opc.lo): Depend on vu0.h
1178 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1180 * dvp-opc.c (vif_opcodes): Add stcycl.
1182 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1184 * dvp-dis.c (print_dma): Change length from 16 to 8.
1187 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1189 * m32r-opc.h: Regenerate.
1192 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1194 * dvp-opc.c (print_dest1): Print dest spec again.
1195 (print_vfreg,print_accdest): Likewise.
1196 (vif_unpack_len): Round result up to word boundary.
1199 start-sanitize-vr4320
1200 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1202 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1204 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1206 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1211 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1213 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1214 (print_insn): Do mask comparison on proper opcode word.
1215 Print unsigned values in hex.
1216 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1217 (parse_bc): Catch missing dest.
1218 (parse_vfreg): Replace atoi call with strtol.
1219 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1220 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1221 (extract_gif_eop): New function.
1222 (gif_operands): Update eop entry.
1223 (VGIFOP,VGIFNREGS): Fix calcs.
1224 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1225 (gif_regs): Add entry for unused 11 case.
1226 (print_gif_regs): Print empty list instead of nothing.
1227 (extract_gif_nloop): Fix value calc.
1228 (print_gif_nloop): Always print value, even if 0.
1229 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1230 (vif_operands): Use them for wl,cl fields.
1231 (state_vif_wl,state_vif_cl): New static locals.
1232 (parse_vif_mode): Handle numeric args.
1233 (vif_unpack_len_value,vif_unpack_len): New functions.
1234 (vif_insn_len): Call vif_unpack_len.
1237 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1239 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1241 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1243 * cgen-asm.in: Move insertion of generated routines to top of file.
1244 (insert_normal): Add prototype. Delete `shift' arg.
1245 * cgen-dis.in: Move insertion of generated routines to top of file.
1246 (extract_normal): Add prototype. Delete `shift' arg.
1247 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1248 (print_keyword): Add prototype. Fix type of `attrs' arg.
1250 start-sanitize-vr4320
1251 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1253 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1254 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1257 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1259 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1260 assume that info->symbols is non-empty.
1262 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1264 * alpha-opc.c (cvtqs) There is no such thing.
1265 (cvttq): Missing most of the /*d variants.
1267 start-sanitize-r5900
1268 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1270 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1272 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1273 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1276 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1278 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1279 delayed branches or jumps.
1282 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1284 * dvp-opc.c (vif_operands): Add unpack[u] support.
1285 (vif_opcodes): Ditto.
1286 (*_vif_imrubits): Renamed from *_vif_imrbits.
1288 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1290 * dvp-dis.c (print_insn): Handle word number.
1291 Handle mips address vs vu address.
1292 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1293 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1294 ({insert,extract}_dma_addr): Fix word ofset.
1295 ({insert,print}_gif_regs): Fix encode/decode.
1298 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1300 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1302 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1303 * tic30-dis.c (print_branch): Likewise.
1305 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1306 * dvp-dis.c (dvp_info_mach_type): New function.
1307 (print_insn_dvp): Call it.
1308 (print_vif): Return length of 4 if mpg or direct insn so following
1309 insns get properly disabled.
1310 (print_gif): Fix word order.
1311 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1312 (gif_operands): Fix word order.
1313 (gif_opcodes): Likewise.
1314 ({insert,extract,print}_gif_regs): Likewise.
1315 (gif_regs): Add new register number/name changes.
1316 (dma_opcodes): Add dmarefe insn.
1319 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1321 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1322 saved_symbol code as it is no longer needed.
1324 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1326 * cgen-asm.c: Include symcat.h.
1327 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1329 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1332 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1334 * dvp-opc.c (extra_dma_flags): Fix typos.
1335 (dma_operands): Fix word numbers.
1336 (dma_opcodes): Likewise.
1337 ({insert,extract}_dma_flags): Likewise.
1340 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1342 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1345 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1347 * dvp-dis.c (print_gif): Complete.
1348 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1349 (state_gif_{nregs,regs,nloop}): New static locals.
1350 (*_gif_*): Complete.
1351 (dvp_opcode_init_{parse,print}): Init gif state locals.
1352 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1353 (vif_insn_len): Handle `unpack'.
1354 ({insert,extract}_dma_flags): Complete.
1357 start-sanitize-r5900
1358 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1360 * mips-opc.c (mula.s): Renamed from multa.s.
1363 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1365 * m32r-opc.[ch]: Regenerate.
1368 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1370 * dvp-opc.c (dma_operands): Rewrite.
1371 (dma_operand_{count,addr}): New globals.
1372 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1373 (insert_dma_addr): Insert value into insn.
1374 (extract_dma_addr): Extract value from insn.
1376 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1378 * dvp-dis.c (print_vu): Handle loi insns.
1379 (print_insn): Likewise.
1380 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1381 (vu_operands): Make LDEST1 a FAKE operand.
1382 (parse_dest1): Allow elided argument.
1383 (print_dest1): Don't print the argument.
1385 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1387 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1388 (print_vfreg): Don't print dest spec.
1389 (parse_accdest): Dest spec is optional.
1390 (print_accdest): Don't print dest spec.
1393 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1395 * Makefile.am (CGENFILES): Update.
1396 * Makefile.in: Regenerate.
1397 * cgen-asm.in (insert_normal): Result is error message now.
1398 Validate value to be inserted.
1399 (insert_insn_normal): Result is error message now.
1400 (@arch@_cgen_assemble_insn): Update.
1401 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1402 arguments. Don't perform validation here.
1403 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1405 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1408 operand instance list.
1409 * m32r-opc.c: Regenerate.
1411 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1413 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1414 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1416 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1418 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1420 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1422 * configure.in: Get the version number from BFD.
1423 * configure: Rebuild.
1425 From H.J. Lu <hjl@gnu.org>:
1426 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1427 * Makefile.in: Rebuild.
1429 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1431 * m32r-opc.c: Regenerate.
1432 * m32r-opc.h: Regenerate.
1434 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1436 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1437 Ignore ALIAS insns if asked to.
1438 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1439 * m32r-opc.c: Regenerate.
1442 * dvp.opc.c: Nicely format opcode tables.
1443 (vu_operands): New element UFLAGS.
1444 (parse_uflags,print_uflags): New functions.
1445 (vu_upper_opcodes): Add UFLAGS to all insns.
1448 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1450 Fix rac to accept only a0:
1451 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1452 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1453 Introduce OPERAND_GPR.
1454 * d10v-dis.c (print_operand): Likewise.
1456 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1458 * cgen-opc.in: New file.
1459 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1460 * Makefile.am (CGENFILES): Add cgen-opc.in.
1461 * Makefile.in: Regenerate.
1463 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1464 (cgen_hw_lookup): Make result const.
1466 * cgen-dis.in (*): Use PTR instead of void *.
1467 (print_insn): Delete unused vars `i', `syntax'.
1469 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1472 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1474 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1475 (vif_opcodes): Update renamed insns.
1476 * dvp-dis.c (*): Likewise.
1479 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1481 * configure, aclocal.m4: Rebuild with new libtool.
1483 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1485 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1486 instructions use a PC relative branch, not absolute.
1488 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1490 * configure.in: Set libtool_enable_shared rather than
1491 libtool_shared. Remove diversion hack.
1492 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1494 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1496 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1497 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1499 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1501 * tic30-dis.c: New file.
1502 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1503 * configure.in: Handle bfd_tic30_arch.
1504 * Makefile.am: Rebuild dependencies.
1505 (CFILES): Add tic30-dis.c
1506 (ALL_MACHINES): Add tic30-dis.lo.
1507 * configure, Makefile.in: Rebuild.
1509 start-sanitize-m32rx
1510 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1512 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1513 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1514 macwhi-a and macwlo-a instructions.
1518 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1520 * dvp-opc.c, fixed encoding of a bunch of instructions to
1521 be consistent with the asmvu assembler (and inconsistent
1522 with the specification).
1524 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1526 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1527 in the opcode table. The pkemscalf instruction must come first.
1529 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1531 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1534 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1536 * m32r-opc.h (HAVE_CPU_M32R): Define.
1539 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1541 * dvp-dis.c, dvp-opc.c: New files.
1542 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1543 * configure: Regenerate.
1544 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1545 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1546 (mips-dis.lo): Compile with @archdefs@.
1547 * Makefile.in: Regenerate.
1548 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1549 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1552 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1554 * v850-opc.c (insertion routines): If both alignment and size is
1555 wrong then report this.
1557 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1559 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1560 Only recognize instructions for the current target_processor.
1562 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1564 * d10v-dis.c (PC_MASK): Correct value.
1565 (print_operand): If there's a reloc, don't calculate the
1566 address because they could be in different sections.
1568 start-sanitize-cygnus
1569 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1571 * cgen.sh: Rewrite to be like simulator's version.
1572 * Makefile.am (cgen): Update call to cgen.sh.
1573 * Makefile.in: Regenerate
1576 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1578 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1579 instruction after the 4650's "mul" instruction; nobody's using the
1580 4010 these days. If object files someday indicate which processor
1581 variant they're intended for, we can do a better job at this.
1583 start-sanitize-r5900
1584 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1586 * mips-opc.c (c.lt.s): Add r5900 variant.
1590 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1592 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1593 table provided entry size. Use CGEN_INSN_MNEMONIC.
1594 (cgen_parse_keyword): Rewrite.
1595 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1596 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1597 * cgen-opc.c: Clean up pass over `struct foo' usage.
1598 (cgen_keyword_lookup_value): Handle "" entry.
1599 (cgen_keyword_add): Likewise.
1600 start-sanitize-cygnus
1601 * Makefile.am: Add cgen support.
1602 * Makefile.in: Regenerate.
1603 * configure.in: Add cgen support.
1604 * configure: Regenerate.
1605 * aclocal.m4: Regenerate.
1606 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1609 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1611 * mips-opc.c: Add FP_D to s.d instruction flags.
1613 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1615 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1617 start-sanitize-tic80
1618 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1620 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1621 PC relative offset forms before the 15 bit forms. An assembler command
1622 line option now chooses the default.
1625 start-sanitize-r5900
1626 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1628 * mips-opc.c: Add many missing r5900 instructions.
1631 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1633 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1634 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1636 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1638 * configure: Only build libopcodes shared if --enable-shared's value
1639 was `yes', or was set to `*opcodes*'.
1640 * aclocal.m4: Likewise.
1641 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1642 original source of this bit of code. It's not clear what the best fix
1645 start-sanitize-r5900
1646 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1648 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1650 start-sanitize-tic80
1651 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1653 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1654 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1655 offset forms before the 15 bit forms, to default to the long forms.
1658 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1660 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1662 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1664 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1665 symbol if none is present.
1666 (print_insn_big_arm): Prevent examination of stored symbol if
1669 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1671 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1673 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1675 * disassemble.c: Remove disasm_symaddr() function.
1677 * arm-dis.c: Use info->symbol instead of info->flags to determine
1678 if disassmbly should be in Thumb or Arm mode.
1680 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1682 * arm-dis.c: Add support for disassembling Thumb opcodes.
1683 (print_insn_thumb): New function.
1685 * disassemble.c (disasm_symaddr): New function.
1687 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1688 (thumb_opcodes): Table of Thumb opcodes.
1690 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1692 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1694 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1695 and 'v' as operand types.
1697 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1699 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1700 <olivier.carmona@di.epfl.ch>.
1701 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1702 which has a two word opcode with a one word argument.
1704 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1706 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1707 unsigned, not signed.
1708 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1710 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1712 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1713 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1714 (ftrv): Slay the cut-and-paste monster.
1716 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1718 * d10v-dis.c (print_operand):
1719 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1721 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1723 * d10v-opc.c (OPERAND_FLAG): Split into:
1724 (OPERAND_FFLAG, OPERAND_CFLAG) .
1728 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1730 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1731 field for all INSN_MACRO's.
1732 * mips16-opc.c: same
1734 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1736 * mips-opc.c (sync,cache): These are 3900 insns.
1738 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1740 sh-opc.h (sh_table): Remove ftst/nan.
1742 start-sanitize-cygnus
1743 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1745 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1746 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1748 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1752 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1754 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1755 Add tx49 insns and configury.
1758 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1760 * mips-opc.c (ffc, ffs): Fix mask.
1762 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1764 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1767 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1769 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1770 start-sanitize-cygnus
1771 Added VR5400 instructions.
1772 (N5): New cpu-id macro.
1774 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1776 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1778 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1779 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1781 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1783 * v850-dis.c (disassemble): Replace // with /* ... */
1785 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1787 * sparc-opc.c: Add wr & rd for v9a asr's.
1788 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1789 (v9a_asr_reg_names): New variable.
1790 Patch from David Miller <davem@vger.rutgers.edu>.
1792 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1794 * sparc-opc.c (v9notv9a): New insn type.
1795 (IMPDEP): Move to the end to not conflict with edge8 et al.
1796 Patch from David Miller <davem@vger.rutgers.edu>.
1798 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1800 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1802 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1804 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1806 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1809 of disassemble_info structure to determine if an overlay address
1810 has a matching symbol in low memory.
1812 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1813 new symbol_at_address_func field in disassemble_info structure.
1815 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1817 * v850-opc.c (extract_d22): Use signed arithmatic.
1819 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1821 * mips-opc.c: Three op mult is not an ISA insn.
1823 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1825 * mips-opc.c: Fix formatting.
1827 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1829 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1830 than assuming that char is signed. Explicitly sign extend 16 bit
1831 values, rather than assuming that short is 16 bits.
1832 (OP_sI, OP_J, OP_DIR): Likewise.
1834 start-sanitize-v850e
1835 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1837 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1841 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1843 * v850-opc.c: Fix typo in comment.
1845 * v850-dis.c (disassemble): Add test of processor type when
1846 determining opcodes.
1848 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1850 * configure.in: Use a diversion to set enable_shared before the
1851 arguments are parsed.
1852 * configure: Rebuild.
1854 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1856 * m68k-opc.c (TBL1): Use ! rather than `.
1857 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1859 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1861 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1863 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1865 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1868 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1869 * aclocal.m4: Rebuild with new libtool.
1870 * configure: Rebuild.
1872 start-sanitize-v850e
1873 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1875 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1878 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1880 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1882 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1884 * v850-opc.c (v850_opcodes): Further rearrangements.
1886 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1888 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1890 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1892 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1895 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1897 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1899 * mips16-opc.c: Added mips16 sdbbp.
1902 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1904 * v850-opc.c: Initialise processors field of v850_opcode structure.
1906 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1908 Merge changes from Martin Hunt:
1910 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1912 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1913 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1914 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1916 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1918 * d30v-dis.c (print_insn): First operand of d*i (delayed
1919 branch) instructions is relative.
1921 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1922 (d30v_operand_table): Add IMM6S3 type.
1923 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1925 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1926 and cmp instructions.
1928 * d30v-opc.c: Correct entries for repeat*, and sat*.
1929 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1930 types. Correct several formats.
1932 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1934 * d30v-opc.c (pre_defined_registers): Change control registers.
1936 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1937 SHORT_C2. Manual was incorrect.
1939 * d30v-dis.c (lookup_opcode): Return value now indicates
1940 if an opcode has a short and a long form. Used for deciding
1941 to append a ".s" or ".l".
1942 (print_insn): Append a ".s" to an instruction if it is
1943 the short form and ".l" if it is a long form. Do not append
1944 anything if the instruction has only one possible size.
1946 * d30v-opc.c: Change mulx2h to require an even register.
1947 New form: SHORT_A2; a SHORT_A form that needs an even
1948 register as the first operand.
1950 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1951 instruction was not being disassembled if there were an odd
1952 number of instructions.
1954 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1956 start-sanitize-v850e
1957 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1959 * v850-dis.c (disassemble): Improved display of register lists.
1962 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1964 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1965 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1966 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1967 fandnot1s, fandnot2s.
1969 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1971 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1973 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1975 * cgen-asm.c (cgen_parse_address): New argument resultp.
1976 All callers updated.
1977 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1979 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1981 * mn10200-dis.c (disassemble): PC relative instructions are
1982 relative to the next instruction, not the current instruction.
1984 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1986 * v850-dis.c (disassemble): Only signed extend values that are not
1987 returned by extract functions.
1988 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1990 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1992 * v850-opc.c: Update comments. Remove use of
1993 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1995 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1997 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1999 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2001 * configure: Rebuilt with latest devo autoconf for NT support.
2003 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2005 * v850-dis.c (disassemble): Use curly brace syntax for register
2008 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2009 where r0 is being used as a destination register.
2011 start-sanitize-v850e
2012 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2014 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2017 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2019 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2020 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2021 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2022 Add insns to access SGR and DBR.
2023 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2025 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2027 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2029 start-sanitize-v850e
2030 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2032 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2033 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2036 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2038 * configure (cgen_files): Add support for v850e target.
2039 * configure.in (cgen_files): Add support for v850e target.
2041 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2043 * configure (cgen_files): Add support for v850ea target.
2044 * configure.in (cgen_files): Add support for v850ea target.
2047 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2049 * configure.in (bfd_arc_arch): Add.
2050 * configure: Rebuild.
2051 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2052 * Makefile.in: Rebuild.
2053 * arc-dis.c, arc-opc.c: New files.
2054 * disassemble.c (ARCH_all): Define ARCH_arc.
2055 (disassembler): Add ARC support.
2057 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2059 start-sanitize-v850e
2060 * v850-dis.c (disassemble): Add support for v850EA instructions.
2062 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2063 (v850_opcodes): Add v850EA instructions.
2065 * v850-dis.c (disassemble): Add support for v850E instructions.
2067 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2068 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2069 insert_spe, extract_spe): New Functions.
2070 (v850_opcodes): Add v850E instructions.
2073 * v850-opc.c: Reorganised and re-layed out to improve readability
2076 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2078 * configure: Rebuild with autoconf 2.12.1.
2080 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2082 * aclocal.m4, configure: Rebuild with new automake patches.
2084 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2086 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2087 * acinclude.m4: Just include acinclude.m4 from BFD.
2088 * aclocal.m4, configure: Rebuild.
2090 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2092 * Makefile.am: New file, based on old Makefile.in.
2093 * acconfig.h: New file.
2094 * acinclude.m4: New file.
2095 * stamp-h.in: New file.
2096 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2097 Removed shared library handling; now handled by libtool. Replace
2098 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2099 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2100 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2101 handling in AC_OUTPUT.
2102 * dep-in.sed: Change .o to .lo.
2103 * Makefile.in: Now built with automake.
2104 * aclocal.m4: Now built with aclocal.
2105 * config.in, configure: Rebuild.
2107 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2109 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2111 start-sanitize-r5900
2112 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2114 * mips-opc.c: Fix coding of mtsa.
2117 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2119 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2121 * sparc-dis.c (sorted_opcodes): New static local.
2122 (struct opcode_hash): `opcode' is pointer to const element.
2123 (build_hash): First arg is now table of sorted pointers.
2124 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2125 (compare_opcodes): Update.
2127 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2129 * cgen-opc.c: #include <ctype.h>.
2130 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2131 Handle case insensitive hashing.
2132 (hash_keyword_value): Change type of `value' to unsigned int.
2134 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2136 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2137 precision FP, mark it as such. Likewise for double precision
2138 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2140 start-sanitize-r5900
2141 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2144 start-sanitize-r5900
2145 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2147 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2148 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2151 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2153 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2155 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2156 nesting depth when all the macros are expanded.
2158 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2160 * sparc-opc.c: The fcmp v9a instructions take an integer register
2161 as a destination, not a floating point register. From Christian
2162 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2164 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2166 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2167 syntax. From Roman Hodek
2168 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2170 * i386-dis.c (twobyte_has_modrm): Fix pand.
2172 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2174 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2176 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2178 * arm-dis.c: Add prototypes for arm_decode_shift and
2181 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2183 * mips-opc.c: Add r3900 insns.
2185 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2187 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2188 print delay slot instructions on the same line. When using a PC
2189 relative load, add a comment with the value being loaded if it can
2192 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2194 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2195 to pushS/popS for segment regs and byte constant so that
2196 pushw/popw printed when in 16 bit data mode.
2198 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2199 print cbtw, cwtd in 16 bit data mode.
2200 * i386-dis.c (putop): extra case W to support above.
2202 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2203 address size prefix in 16 bit address mode.
2205 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2207 * sh-dis.c: Reindent. Rename local variable fprintf to
2210 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2212 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2214 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2216 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2218 * mips16-opc.c (mip16_opcodes): same.
2220 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2222 * m68k-opc.c (moveb): Change $d to %d.
2224 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2226 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2227 (twobyte_has_modrm): Likewise.
2229 (OP_MMX, OP_EM, OP_MS): New static functions.
2231 * i386-dis.c: Revert patch of April 4. The output now matches
2234 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2236 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2239 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2241 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2243 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2245 * Makefile.in (install): Depend upon installdirs.
2246 (installdirs): New target.
2248 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2250 From Thomas Graichen <graichen@rzpd.de>:
2251 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2252 * configure: Rebuild.
2254 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2256 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2257 Delete string{,s}.h support.
2259 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2261 * cgen-asm.c (cgen_parse_operand_fn): New global.
2262 (cgen_parse_{{,un}signed_integer,address}): Update call to
2263 cgen_parse_operand_fn.
2264 (cgen_init_parse_operand): New function.
2265 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2266 from cgen_asm_init_parse.
2267 (m32r_cgen_assemble_insn): New operand `errmsg'.
2268 Delete call to as_bad, return error message to caller.
2269 (m32r_cgen_asm_hash_keywords): #if 0 out.
2271 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2273 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2275 [case 'J']: Fix typo in register name.
2277 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2279 * configure.in: Substitute SHLIB_LIBS.
2280 * configure: Rebuild.
2281 * Makefile.in (SHLIB_LIBS): New variable.
2282 ($(SHLIB)): Use $(SHLIB_LIBS).
2284 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2286 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2288 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2290 * disassemble.c (disassembler): Handle m32r.
2292 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2294 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2295 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2296 * Makefile.in (CFILES): Add them.
2297 (ALL_MACHINES): Add them.
2298 (dependencies): Regenerate.
2299 * configure.in (cgen_files): New variable.
2300 (bfd_m32r_arch): Add entry.
2301 * configure: Regenerate.
2303 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2305 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2306 * configure: Rebuild.
2308 * Makefile.in: Rebuild dependencies.
2310 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2312 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2315 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2317 * Branched binutils 2.8.
2319 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2321 * m10200-dis.c: Rename from mn10200-dis.c.
2322 * m10200-opc.c: Rename from mn10200-opc.c.
2323 * m10300-dis.c: Rename from mn10300-dis.c
2324 * m10300-opc.c: Rename from mn10300-opc.c.
2325 * Makefile.in: Update accordingly.
2327 * mips16-opc.c: Add mul and dmul macros.
2329 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2331 * makefile.vms: Update CFLAGS, add clean target.
2333 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2335 * mips-opc.c: Add "wait". From Ralf Baechle
2336 <ralf@gnu.ai.mit.edu>.
2338 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2339 * configure, config.in: Rebuild.
2340 * sysdep.h: Include <stdlib.h> if it exists.
2341 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2343 * Makefile.in: Rebuild dependencies.
2345 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2347 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2348 Andrew Bray <andy@madhouse.demon.co.uk>.
2350 * mips-opc.c: Add cast when setting mips_opcodes.
2352 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2354 * v850-dis.c (disassemble): Fix sign extension problem.
2355 * v850-opc.c (extract_d*): Fix sign extension problems to make
2356 disassembly calculate branch offsets correctly.
2358 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2360 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2362 * mips-opc.c: Add dctr and dctw.
2364 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2366 * d30v-dis.c (print_insn): Change the way signed constants
2369 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2371 * Makefile.in (BFD_H): New variable.
2372 (HFILES): New variable.
2373 (CFILES): Add all C files.
2374 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2375 Delete old dependencies, and build new ones.
2376 * dep-in.sed: New file.
2378 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2380 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2382 start-sanitize-coldfire
2383 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2385 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2388 end-sanitize-coldfire
2389 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2391 * mn10200-opc.c: Change "trap" to "syscall".
2392 * mn10300-opc.c: Add new "syscall" instruction.
2394 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2396 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2397 mulul insns on the coldfire.
2399 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2401 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2402 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2403 (print_insn_little_arm): Likewise.
2405 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2407 Based on patches from H.J. Lu <hjl@lucon.org>:
2408 * i386-dis.c (fetch_data): Add prototype.
2409 * m68k-dis.c (fetch_data): Add prototype.
2410 (dummy_print_address): Add prototype. Make static.
2411 * ppc-opc.c (valid_bo): Add prototype.
2412 * sparc-dis.c (build_hash_table): Add prototype.
2413 (is_delayed_branch, compute_arch_mask): Add prototypes.
2414 (print_insn_sparc): Make several local variables const.
2415 (compare_opcodes): Change arguments to const PTR. Add prototype.
2416 * sparc-opc.c (arg): Change name field to be const.
2417 (lookup_name, lookup_value): Add prototypes. Change table and
2418 name parameters to be const.
2419 (sparc_encode_asi): Change name parameter to be const.
2420 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2421 (sparc_encode_sparclet_cpreg): Likewise.
2422 (sparc_decode_asi): Change return type to be const.
2423 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2424 (sparc_decode_sparclet_cpreg): Likewise.
2426 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2429 Solaris doesn't like the combined options, and the -f is
2431 (stamp-tshlink, install): Likewise.
2433 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2435 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2438 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2440 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2442 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2444 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2447 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2449 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2451 start-sanitize-tic80
2452 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2454 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2456 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2458 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2461 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2463 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2464 floatformat_to_double to make portable.
2465 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2468 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2470 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2471 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2473 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2475 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2476 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2478 start-sanitize-tic80
2479 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2481 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2482 (OFF_SL_BR_SCALED): ... to this, and added the flag
2483 TIC80_OPERAND_BASEREL to the flags word.
2484 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2488 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2490 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2491 Change mips_opcodes from const array to a pointer,
2492 and change bfd_mips_num_opcodes from const int to int,
2493 so that we can increase the size of the mips opcodes table
2496 start-sanitize-tic80
2497 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2499 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2500 store BITNUM values in the table in one's complement form
2501 to match behavior when assembler is given a raw numeric
2502 value for a BITNUM operand.
2503 * tic80-dis.c (print_operand_bitnum): Ditto.
2506 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2508 * d30v-opc.c: Removed references to FLAG_X.
2510 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2512 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2514 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2516 * Makefile.in: Added d30v object files.
2517 * configure: (bfd_d30v_arch) Rebuilt.
2518 * configure.in: (bfd_d30v_arch) Added new case.
2519 * d30v-dis.c: New file.
2520 * d30v-opc.c: New file.
2521 * disassemble.c (disassembler) Add entry for d30v.
2523 start-sanitize-tic80
2524 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2526 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2527 representations for the floating point BITNUM values.
2529 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2531 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2532 in the table in one's complement form, as they appear in the
2534 (tic80_symbol_to_value): Use macros to access predefined
2536 (tic80_value_to_symbol): Ditto.
2537 (tic80_next_predefined_symbol): New function.
2538 * tic80-dis.c (print_operand_bitnum): Remove code that did
2539 one's complement for BITNUM values.
2542 start-sanitize-r5900
2543 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2545 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2548 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2550 * makefile.vms: Remove 8 bit characters. Update to latest
2553 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2555 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2557 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2559 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2560 (IMM24_PCREL): Likewise.
2562 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2564 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2565 address for an extended PC relative instruction that is not a
2568 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2570 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2573 start-sanitize-tic80
2574 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2576 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2577 (tic80_opcodes): Sort entries so that long immediate forms
2578 come after short immediate forms, making it easier for
2579 assembler to select the right one for a given operand.
2582 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2584 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2586 (print_insn_mips16): Likewise.
2588 start-sanitize-r5900
2589 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2591 * mips-opc.c: add r5900.
2594 start-sanitize-tic80
2595 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2597 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2598 a symbol class that restricts translation to just that
2599 class (general register, condition code, etc).
2601 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2603 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2604 and REG_DEST_E for register operands that have to be
2605 an even numbered register. Add REG_FPA for operands that
2606 are one of the floating point accumulator registers.
2607 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2608 (tic80_opcodes): Change entries that need even numbered
2609 register operands to use the new operand table entries.
2610 Add "or" entries that are identical to "or.tt" entries.
2613 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2615 * mips16-opc.c: Add new cases of exit instruction for
2617 * mips-dis.c (print_mips16_insn_arg): Display floating point
2618 registers in operands of exit instruction. Print `$' before
2619 register names in operands of entry and exit instructions.
2621 start-sanitize-tic80
2622 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2624 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2625 pairs for all predefined symbols recognized by the assembler.
2626 Also used by the disassembling routines.
2627 (tic80_symbol_to_value): New function.
2628 (tic80_value_to_symbol): New function.
2629 * tic80-dis.c (print_operand_control_register,
2630 print_operand_condition_code, print_operand_bitnum):
2631 Remove private tables and use tic80_value_to_symbol function.
2634 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2636 * d10v-dis.c (print_operand): Change address printing
2637 to correctly handle PC wrapping. Fixes PR11490.
2639 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2641 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2644 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2646 * mips-dis.c (print_insn_mips16): Set insn_info information.
2647 (print_mips16_insn_arg): Likewise.
2649 * mips-dis.c (print_insn_mips16): Better handling of an extend
2650 opcode followed by an instruction which can not be extended.
2652 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2654 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2655 coldfire moveb instruction to not allow an address register as
2656 destination. Although the documentation does not indicate that
2657 this is invalid, experiments uncovered unexpected behavior.
2658 Added a comment explaining the situation. Thanks to Andreas
2659 Schwab for pointing this out to me.
2661 start-sanitize-tic80
2662 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2664 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2665 entries are presorted so that entries with the same mnemonic are
2666 adjacent to each other in the table. Sort the entries for each
2667 instruction so that this is true.
2670 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2672 * m68k-dis.c: Include <libiberty.h>.
2673 (print_insn_m68k): Sort the opcode table on the most significant
2674 nibble of the opcode.
2676 start-sanitize-tic80
2677 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2679 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2680 "vsub", "vst", "xnor", and "xor" instructions.
2681 (V_a1): Renamed from V_a, msb of accumulator reg number.
2682 (V_a0): Add macro, lsb of accumulator reg number.
2684 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2686 * tic80-dis.c (print_insn_tic80): Broke excessively long
2687 function up into several smaller ones and arranged for
2688 the instruction printing function to be callable recursively
2689 to print vector instructions that have both a load and a
2690 math instruction packed into a single opcode.
2691 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2692 to explain why it comes after the other vector opcodes.
2695 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2697 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2698 move insns to handle immediate operands.
2700 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2702 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2703 fix operand mask in the "moveml" entries for the coldfire.
2705 start-sanitize-tic80
2706 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2708 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2709 New macros for building vector instruction opcodes.
2710 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2711 FMT_LI, which were unused. The field is now a flags field.
2712 Remove some opcodes that are possible, but illegal, such
2713 as long immediate instructions with doubles for immediate
2714 values. Add "vadd" and "vld" instructions.
2716 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2718 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2719 the order more logical. Move the shift alias instructions ("rotl",
2720 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2721 interspersed with the regular sr.x and sl.x instructions. Add
2722 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2723 "sub", "subu", "swcr", and "trap".
2725 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2728 (OFF_SL_PC): Renamed from OFF_SL.
2729 (OFF_SS_BR): New operand type for base relative operand.
2730 (OFF_SL_BR): New operand type for base relative operand.
2731 (REG_BASE): New operand type for base register operand.
2732 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2733 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2734 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2736 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2737 10 char field, padded with spaces on rhs, rather than a string
2738 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2739 than old TIC80_OPERAND_RELATIVE. Add support for new
2740 TIC80_OPERAND_BASEREL flag bit.
2742 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2744 * tic80-dis.c (print_insn_tic80): Print floating point operands
2746 * tic80-opc.c (SPFI): Add single precision floating point
2747 immediate operand type.
2748 (ROTATE): Add rotate operand type for shifts.
2749 (ENDMASK): Add for shifts.
2750 (n): Macro for the 'n' bit.
2751 (i): Macro for the 'i' bit.
2752 (PD): Macro for the 'PD' field.
2753 (P2): Macro for the 'P2' field.
2754 (P1): Macro for the 'P1' field.
2755 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2759 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2761 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2762 adding in current address for pc-relative operands.
2764 start-sanitize-tic80
2765 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2767 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2768 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2769 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2770 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2771 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2772 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2773 (REG_SCALED, LSI_SCALED): New operand types.
2774 (E): New macro for 'E' bit at bit 27.
2775 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2776 opcodes, including the various size flavors (b,h,w,d) for
2777 the direct load and store instructions.
2779 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2781 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2783 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2784 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2785 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2786 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2787 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2788 masks with "MASK_* & ~M_*" to get the M bit reset.
2789 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2791 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2793 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2794 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2795 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2797 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2798 CC, SICR, and LICR table entries.
2799 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2800 "bcnd", and "brcr" opcodes.
2803 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2805 * ppc-opc.c (powerpc_operands): Make comment match the
2806 actual fields (no shift field).
2807 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2808 start-sanitize-tic80
2809 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2810 partial implementation, work in progress.
2811 * tic80-opc.c (tic80_operands): Begin construction operands table.
2812 (tic80_opcodes): Continue populating opcodes table and start
2813 filling in the operand indices.
2814 (tic80_num_opcodes): Add this.
2817 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2819 * m68k-opc.c: Add #B case for moveq.
2821 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2823 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2824 before they are used.
2826 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2828 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2829 for "breakpoint" instruction.
2831 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2833 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2834 (dep): Use ALL_CFLAGS rather than CFLAGS.
2836 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2838 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2841 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2843 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2844 start-sanitize-tic80
2845 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2848 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2850 * mips16-opc.c: Add "abs".
2852 start-sanitize-tic80
2853 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2855 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2856 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2857 (disassembler): Add bfd_arch_tic80 support to set disassemble
2858 to print_insn_tic80.
2859 * tic80-dis.c (print_insn_tic80): Add stub.
2861 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2863 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2864 * configure: Regenerate with autoconf.
2865 * tic80-dis.c: Add file.
2866 * tic80-opc.c: Add file.
2869 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2871 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2873 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2875 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2876 (mn10200_opcodes): Use it for some logicals and btst insns.
2877 Add "break" and "trap" instructions.
2879 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2881 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2883 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2885 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2886 relative load or add now depends upon whether the instruction is
2889 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2891 * mn10200-dis.c: Finish writing disassembler.
2892 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2893 Fix mask for "jmp (an)".
2895 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2896 handle endianness issues for mn10300.
2898 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2900 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2902 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2903 instruction. Fix opcode field for "movb (imm24),dn".
2905 * mn10200-opc.c (mn10200_operands): Fix insertion position
2908 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2910 * mn10200-opc.c: Create mn10200 opcode table.
2911 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2912 but moving along nicely.
2914 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2916 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2918 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2920 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2921 specifiers for fmovem* instructions.
2923 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2925 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2927 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2929 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2932 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10300-opc.c: Add some comments explaining the various
2937 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2939 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2941 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2944 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2945 operand specifiers in fmovm* instructions.
2947 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2949 * ppc-opc.c (insert_li): Give an error if the offset has the two
2950 least significant bits set.
2952 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2954 * mips-dis.c (print_insn_mips16): Separate the instruction from
2955 the arguments with a tab, not a space.
2957 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2959 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2962 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2965 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2967 * configure: Rebuild with autoconf 2.12.
2969 Add support for mips16 (16 bit MIPS implementation):
2970 * mips16-opc.c: New file.
2971 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2972 (mips16_reg_names): New static array.
2973 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2974 after seeing a 16 bit symbol.
2975 (print_insn_little_mips): Likewise.
2976 (print_insn_mips16): New static function.
2977 (print_mips16_insn_arg): New static function.
2978 * mips-opc.c: Add jalx instruction.
2979 * Makefile.in (mips16-opc.o): New target.
2980 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2981 * configure: Rebuild.
2983 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2985 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2986 operand specifiers in *save, *restore and movem* instructions.
2988 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2991 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2992 register operands for immediate arithmetic, not, neg, negx, and
2993 set according to condition instructions.
2995 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2996 specifier of the effective-address operand in immediate forms of
2997 arithmetic instructions. The specifier for the immediate operand
2998 notes how and where the constant will be stored.
3000 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3002 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3005 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3008 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3010 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3012 * mn10300-dis.c (disassemble): Handle register lists.
3014 * mn10300-opc.c: Fix handling of register list operand for
3015 "call", "ret", and "rets" instructions.
3017 * mn10300-dis.c (disassemble): Print PC-relative and memory
3018 addresses symbolically if possible.
3019 * mn10300-opc.c: Distinguish between absolute memory addresses,
3020 pc-relative offsets & random immediates.
3022 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3024 (disassemble): Handle SPLIT and EXTENDED operands.
3026 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10300-dis.c: Rough cut at printing some operands.
3030 * mn10300-dis.c: Start working on disassembler support.
3031 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3033 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3035 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3037 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3039 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3041 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3043 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3044 register argument is calls and jmp instructions.
3046 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3048 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3049 getx operand. Fix opcode for mulqu imm,dn.
3051 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3053 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3054 in MN10300_OPERAND_SPLIT operands for how many bits
3055 appear in the basic insn word. Add IMM32_HIGH24,
3056 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3057 (mn10300_opcodes): Use new operands as needed.
3059 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3060 for bset, bclr, btst instructions.
3061 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3063 * mn10300-opc.c (mn10300_operands): Remove many redundant
3064 operands. Update opcode table as appropriate.
3065 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3066 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3068 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3070 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3071 operands (for indexed load/stores). Fix bitpos for DI
3072 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3073 few instructions that insert immediates/displacements in the
3074 middle of the instruction. Add IMM8E for 8 bit immediate in
3075 the extended part of an instruction.
3076 (mn10300_operands): Use new opcodes as appropriate.
3078 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3080 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3081 sequential so the assembler never parallelizes it with
3084 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3086 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3087 a data/address register that appears in register field 0
3088 and register field 1.
3089 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3091 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3093 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3094 standard disassembly.
3096 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3097 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3098 Recategorize PALcode instructions.
3100 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3102 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3104 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3106 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3107 there are no operand types.
3109 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3111 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3113 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3115 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3117 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3119 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3121 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3122 and sst.w instructions.
3124 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3127 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3129 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3132 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3134 * ppc-opc.c (PPCPWR2): Define.
3135 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3138 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3140 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3141 field for movhu instruction.
3143 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3144 cast value to "long" not "signed long" to keep hpux10
3147 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3149 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3152 * mn10300-opc.c (FMT*): Remove definitions.
3154 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3155 for shift-by-register opcodes.
3157 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3158 into [AD][MN][01] for encoding the position of the register
3161 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3163 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3164 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3166 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3168 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3169 Fix various typos. Add "PAREN" operand.
3170 (MEM, MEM2): Define.
3171 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3172 operands. Fix several typos.
3174 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3177 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3179 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3180 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3182 (mn10300_opcodes): Break opcode format out into its own field.
3183 Update many operand fields to deal with signed vs unsigned
3184 issues. Fix one or two typos in the "mov" instruction
3185 opcode, mask and/or operand fields.
3187 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3189 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3190 m68851 wasn't reset.
3192 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3194 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3195 all opcodes. Very rough cut at operands for all opcodes.
3197 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3200 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3202 * mn10200-opc.c, mn10300-opc.c: New files.
3203 * mn10200-dis.c, mn10300-dis.c: New files.
3204 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3205 * disassemble.c: Break mn10x00 support into 10200 and 10300
3207 * configure.in: Likewise.
3208 * configure: Rebuilt.
3210 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3212 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3214 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3216 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3218 * disassemble (ARCH_mn10x00): Define.
3219 (disassembler): Handle bfd_arch_mn10x00.
3220 * configure.in: Recognize bfd_mn10x00_arch.
3221 * configure: Rebuilt.
3223 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3225 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3226 accordingly. Don't declare functions using op_rtn.
3228 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3230 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3231 params to be more standard.
3232 * (disassemble): Print absolute addresses and symbolic names for
3233 branch and jump targets.
3234 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3236 * (v850_opcodes): Add breakpoint insn.
3238 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3240 * m68k-opc.c: Move the fmovemx data register cases before the
3241 other cases, so that they get recognized before the data register
3242 does gets treated as a degenerate register list.
3244 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3246 * mips-opc.c: Add a case for "div" and "divu" with two registers
3247 and a destination of $0.
3249 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3251 * mips-dis.c (print_insn_arg): Add prototype.
3252 (_print_insn_mips): Ditto.
3254 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3256 * mips-dis.c (print_insn_arg): Print condition code registers as
3259 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3261 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3263 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3265 * v850-dis.c (disassemble): Make static. Provide prototype.
3267 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3269 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3272 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3274 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3275 ']' characters into the output stream.
3276 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3277 Add "memop" field to all opcodes (for the disassembler).
3278 Reorder opcodes so that "nop" comes before "mov" and "jr"
3279 comes before "jarl".
3281 * v850-dis.c (print_insn_v850): Fix typo in last change.
3283 * v850-dis.c (print_insn_v850): Properly handle disassembling
3284 a two byte insn at the end of a memory region when the memory
3285 region's size is only two byte aligned.
3287 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3289 * v850-dis.c (v850_reg_names): Define.
3290 (v850_sreg_names, v850_cc_names): Likewise.
3291 (disassemble): Very rough cut at printing operands (unformatted).
3293 * v850-opc.c (BOP_MASK): Fix.
3294 (v850_opcodes): Fix mask for jarl and jr.
3296 * v850-dis.c: New file. Skeleton for disassembler support.
3297 * Makefile.in Remove v850 references, they're not needed here.
3298 * configure.in: Add v850-dis.o when building v850 toolchains.
3299 * configure: Rebuilt.
3300 * disassemble.c (disassembler): Call v850 disassembler.
3302 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3303 (insert_d8_6, extract_d8_6): New functions.
3304 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3305 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3307 (IF4A, IF4B): Use "D7" instead of "D7S".
3308 (IF4C, IF4D): Use "D8_7" instead of "D8".
3309 (IF4E, IF4F): New. Use "D8_6".
3310 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3311 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3313 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3314 (v850_operands): Change D16 to D16_15, use special insert/extract
3315 routines. New new D16 that uses the generic insert/extract code.
3316 (IF7A, IF7B): Use D16_15.
3317 (IF7C, IF7D): New. Use D16.
3318 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3320 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3321 message. Issue an error if the branch offset is odd.
3323 * v850-opc.c: Add notes about needing special insert/extract
3324 for all the load/store insns, except "ld.b" and "st.b".
3326 * v850-opc.c (insert_d22, extract_d22): New functions.
3327 (v850_operands): Use insert_d22 and extract_d22 for
3329 (insert_d9): Fix range check.
3331 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3333 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3334 and set bits field to D9 and D22 operands.
3336 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3338 * v850-opc.c (v850_operands): Define SR2 operand.
3339 (v850_opcodes): "ldsr" uses R1,SR2.
3341 * v850-opc.c (v850_opcodes): Fix opcode specs for
3342 sld.w, sst.b, sst.h, sst.w, and nop.
3344 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3346 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3347 end of the opcode table.
3349 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3351 * d10v-opc.c (pre_defined_registers): Added register pairs,
3352 "r0-r1", "r2-r3", etc.
3354 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3356 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3357 Create I16U for an unsigned 16bit mmediate operand.
3358 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3360 * v850-opc.c (v850_operands): Define EP operand.
3361 (IF4A, IF4B, IF4C, IF4D): Use EP.
3363 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3364 with immediate operand, "movhi". Tweak "ldsr".
3366 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3367 correct. Get sld.[bhw] and sst.[bhw] closer.
3369 * v850-opc.c (v850_operands): "not" is a two byte insn
3371 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3373 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3375 * v850-opc.c (two): Get order of words correct.
3377 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3379 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3380 register source and destination operands.
3381 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3383 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3384 same thinko in "trap" opcode.
3386 * v850-opc.c (v850_opcodes): Add initializer for size field
3389 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3390 Add D8 for 8-bit unsigned field in short load/store insns.
3391 (IF4A, IF4D): These both need two registers.
3392 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3393 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3394 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3395 for "ldsr" and "stsr".
3396 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3399 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3400 short store word (sst.w).
3402 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3404 * v850-opc.c (v850_operands): Added insert and extract fields,
3405 pointers to functions that handle unusual operand encodings.
3407 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3409 * v850-opc.c (v850_opcodes): Enable "trap".
3411 * v850-opc.c (v850_opcodes): Fix order of displacement
3412 and register for "set1", "clr1", "not1", and "tst1".
3414 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3416 * v850-opc.c (v850_operands): Add "B3" support.
3417 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3420 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3422 * v850-opc.c: Close unterminated comment.
3424 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3426 * v850-opc.c (v850_operands): Add flags field.
3427 (v850_opcodes): add move opcodes.
3429 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3431 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3432 * configure: (bfd_v850v_arch) Add new case.
3433 * configure.in: (bfd_v850_arch) Add new case.
3434 * v850-opc.c: New file.
3436 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3438 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3440 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3442 * d10v-opc.c: Add additional information to the opcode
3443 table to help determinine which instructions can be done
3446 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3448 * mpw-make.sed: Update editing of include pathnames to be
3451 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3453 * arm-opc.h: Added "bx" instruction definition.
3455 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3457 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3459 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3461 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3463 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3465 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3467 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3469 * makefile.vms: Update for alpha-opc changes.
3471 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3473 * i386-dis.c (print_insn_i386): Actually return the correct value.
3474 (ONE, OP_ONE): #ifdef out; not used.
3476 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3478 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3479 Changed subi operand type to treat 0 as 16.
3481 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3486 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3488 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3489 memory transfer instructions. Add new format string entries %h and %s.
3490 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3493 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3495 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3496 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3498 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * alpha-dis.c (print_insn_alpha_osf): Remove.
3501 (print_insn_alpha_vms): Remove.
3502 (print_insn_alpha): Make globally visible. Chose the register
3503 names based on info->flavour.
3504 * disassemble.c: Always return print_insn_alpha for the alpha.
3506 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3508 * d10v-dis.c (dis_long): Handle unknown opcodes.
3510 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3512 * d10v-opc.c: Changes to support signed and unsigned numbers.
3513 All instructions with the same name that have long and short forms
3514 now end in ".l" or ".s". Divs added.
3515 * d10v-dis.c: Changes to support signed and unsigned numbers.
3517 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3519 * d10v-dis.c: Change all functions to use info->print_address_func.
3521 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3523 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3524 move ccr/sr insns more strict so that the disassembler only
3525 selects them when the addressing mode is data register.
3527 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3528 * d10v-opc.c (pre_defined_registers): Declare.
3529 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3530 to pick a better name for the registers.
3532 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3534 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3535 operands for fexpand and fpmerge. From Christian Kuehnke
3536 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3538 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3540 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3541 print routine. Take new regnames and cpumask arguments.
3542 Kill the environment variable nonsense.
3543 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3544 (print_insn_alpha_vms): New function. Do VMS style regnames.
3545 * disassemble.c (disassembler): Test bfd flavour to pick
3546 between OSF and VMS routines. Default to OSF.
3548 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3550 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3551 * configure: Rebuild.
3552 * Makefile.in (install): Use @INSTALL_SHLIB@.
3554 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3556 * configure: (bfd_d10v_arch) Add new case.
3557 * configure.in: (bfd_d10v_arch) Add new case.
3558 * d10v-dis.c: New file.
3559 * d10v-opc.c: New file.
3560 * disassemble.c (disassembler) Add entry for d10v.
3562 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3564 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3565 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3567 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3569 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3570 distinguish between variants of the instruction set.
3571 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3572 distinguish between variants of the instruction set.
3574 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3576 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3577 the 8086 instruction set.
3578 * i386-dis.c: General cleanups. Make most things static. Add
3579 prototypes. Get rid of static variables aflags and dflags. Pass
3580 them as args (to almost everything).
3582 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3584 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3586 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3588 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3589 if the next arg is marked with SRC_IN_DST. Gross.
3591 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3592 we're looking for and find EXR.
3594 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3595 if we're looking for KBIT and we don't find it.
3597 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3600 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3601 3bit immediate operands.
3603 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3605 * Released binutils 2.7.
3607 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3608 <kkaempf@progis.ac-net.de>.
3610 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3612 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3614 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3616 * sparc-dis.c (print_insn_sparclite): New routine to print
3617 sparclite instructions.
3619 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3621 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3623 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3625 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3626 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3627 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3629 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3631 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3632 Use autoconf-set values.
3633 (docdir, oldincludedir): Removed.
3634 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3636 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3638 * alpha-opc.c: New file.
3639 * alpha-opc.h: Remove.
3640 * alpha-dis.c: Complete rewrite to use new opcode table.
3641 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3642 * configure: Rebuild with autoconf 2.10.
3643 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3644 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3646 (alpha-opc.o): New target.
3648 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3650 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3651 Set imm_added_to_rs1 even if the source and destination register
3654 * sparc-opc.c: Add some two operand forms of the wr instruction.
3656 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3658 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3661 * disassemble.c (disassembler): Handle H8/S.
3662 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3664 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3666 * sparc-opc.c: Add beq/teq as aliases for be/te.
3668 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3669 <sergei@msil.sps.mot.com>.
3671 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3673 * makefile.vms: New file.
3675 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3677 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3679 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3682 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3684 * i386-dis.c (OP_OFF): Call append_prefix.
3686 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3688 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3689 unsigned long to silence a warning from the Solaris PowerPC
3692 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3694 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3696 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3698 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3700 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3701 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3702 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3703 cpush, cpusha, cpull sparclet insns.
3705 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3707 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3709 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3711 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3712 Set F_FLOAT on other floating point instructions.
3714 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3716 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3718 (powerpc_opcodes): Add 860/821 specific SPRs.
3720 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3722 * configure.in: Permit --enable-shared to specify a list of
3723 directories. Set and substitute BFD_PICLIST.
3724 * configure: Rebuild.
3725 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3726 uses. Set to @BFD_PICLIST@.
3728 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3730 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3731 not "abs", which may be needed for the absolute in something
3732 like btst #0,@10:8. Print L_3 immediates separately from other
3733 immediates. Change ABSMOV reference to ABS8MEM.
3735 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3737 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3738 (current_arch_mask): New static global.
3739 (compute_arch_mask): New static function.
3740 (print_insn_sparc): Delete sparc_v9_p. New static local
3741 current_mach. Resort opcode table if current_mach changes.
3742 Generalize "insn not supported" test.
3743 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3744 Delete test for v9/!v9.
3745 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3747 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3748 (brfcx): Renamed to FBRX.
3749 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3750 coprocessor mnemonics are not supported on the sparclet).
3751 (condf): Renamed to CONDF.
3752 (SLCBCC2): Delete F_ALIAS flag.
3754 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3756 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3757 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3759 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3761 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3762 that the shared library version number is set correctly.
3764 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3766 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3767 Miles Bader <miles@gnu.ai.mit.edu>.
3768 * configure: Rebuild.
3770 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3772 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3775 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3777 * configure: Rebuild with autoconf 2.8.
3779 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3781 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3782 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3784 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3786 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3787 since they appear as targets in Makefile.in.
3788 * configure: Rebuild.
3790 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3792 * mpw-make.sed: Edit out shared library support bits.
3794 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3796 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3797 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3798 (sparc_opcodes): Add sparclet insns.
3799 (sparclet_cpreg_table): New static local.
3800 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3801 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3803 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3805 * i386-dis.c (index16): New static variable.
3806 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3808 (OP_indirE): Return result of OP_E.
3809 (OP_E): Check for 16 bit addressing mode, and disassemble
3810 correctly. Optimised 32 bit case a little. Don't print
3811 "(base,index,scale)" when sib specifies only an offset.
3813 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3815 * configure.in: Set and substitute SHLIB_DEP.
3816 * configure: Rebuild.
3817 * Makefile.in (SHLIB_DEP): New variable.
3818 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3819 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3820 COMMON_SHLIB, add them to piclist with appropriate modifications.
3821 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3822 here: just use piclist.
3824 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3826 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3827 (print_insn_sparc): Rewrite v9/not-v9 tests.
3828 (compare_opcodes): Likewise.
3829 * sparc-opc.c (MASK_<ARCH>): Define.
3830 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3831 (sparclet,v6notv9): Define.
3832 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3833 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3835 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3837 * configure.in: Call AC_PROG_CC before configure.host.
3838 * configure: Rebuild.
3840 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3842 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3844 * i386-dis.c (onebyte_has_modrm): New static array.
3845 (twobyte_has_modrm): New static array.
3846 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3848 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3850 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3853 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3855 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3858 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3860 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3861 m68010up, not just m68020up | cpu32.
3863 * Makefile.in (SONAME): New variable.
3864 ($(SHLINK)): Make a link to the transformed name, as well.
3865 (stamp-tshlink): New target.
3866 (install): Skip stamp-tshlink during install.
3868 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3870 * configure.in: Call AC_ARG_PROGRAM.
3871 * configure: Rebuild.
3872 * Makefile.in (program_transform_name): New variable.
3873 (install): Transform library name before installing it.
3875 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3877 * i960-dis.c (mem): Add HX dcinva instruction.
3879 Support for building as a shared library, based on patches from
3880 Alan Modra <alan@spri.levels.unisa.edu.au>:
3881 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3882 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3883 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3884 * configure: Rebuild.
3885 * Makefile.in (ALLLIBS): New variable.
3886 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3887 (COMMON_SHLIB, SHLINK): New variables.
3888 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3889 (STAGESTUFF): Remove variable.
3890 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3891 (stamp-piclist, piclist): New targets.
3892 ($(SHLIB), $(SHLINK)): New targets.
3893 ($(OFILES)): Depend upon stamp-picdir.
3894 (disassemble.o): Build twice if PICFLAG is set.
3895 (MOSTLYCLEAN): Add pic/*.o.
3896 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3897 (distclean): Remove pic and stamp-picdir.
3898 (install): Install shared libraries.
3899 (stamp-picdir): New target.
3901 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3903 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3904 Print unknown instruction as "unknown", rather than in hex.
3906 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3908 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3910 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3912 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3914 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3916 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3917 when necessary. From Ulrich Drepper
3918 <drepper@myware.rz.uni-karlsruhe.de>.
3920 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3922 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3923 sparc_num_opcodes. Update architecture enum values.
3924 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3925 (sparc_opcode_lookup_arch): New function.
3926 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3927 (sparc_opcodes): Add v9a shutdown insn.
3929 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3931 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3932 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3934 (print_insn_sparc64): Deleted.
3935 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3938 * sparc-opc.c (architecture_pname): Add v9a.
3940 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3942 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3943 incorrectly defined as 0x16 when it should be 0x15.
3944 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3945 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3946 excb (exception barrier) which is defined in the Alpha
3947 Architecture Handbook version 2.
3948 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3949 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3950 disassembled as or, for example.
3952 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3954 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3955 (_print_insn_mips): Change i from int to unsigned int.
3957 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3959 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3960 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3962 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3964 * i386-dis.c: Added Pentium Pro instructions.
3966 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3968 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3971 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3973 * sh-opc.h (sh_nibble_type): Added REG_B.
3974 (sh_arg_type): Added A_REG_B.
3975 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3977 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3979 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3981 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3983 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3985 * Makefile.in (distclean): Remove stamp-h. From Ronald
3986 F. Guilmette <rfg@monkeys.com>.
3988 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3990 From David Mosberger-Tang <davidm@azstarnet.com>:
3991 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3994 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3996 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3997 (sh_table): Added many SH3 opcodes.
3998 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4000 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4002 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4003 (subco,subco.): Mark this PPC, not PPCCOM.
4005 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4007 * configure: Rebuild with autoconf 2.7.
4009 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4011 * configure: Rebuild with autoconf 2.6.
4013 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4015 * configure.in: Sort list of architectures. Accept but do nothing
4016 for alliant, convex, pyramid, romp, and tahoe.
4018 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4020 * a29k-dis.c (print_special): Change num to unsigned int.
4022 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4024 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4027 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4029 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4030 * configure: Rebuilt.
4032 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4034 * configure.in: Add case for bfd_i860_arch.
4035 * configure: Rebuild.
4037 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4039 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4040 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4041 (NEXTDOUBLE): Likewise.
4042 (print_insn_m68k): Don't match fmoveml if there is more than one
4043 register in the list.
4044 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4046 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4048 * m68k-opc.c: Use #W rather than #w.
4049 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4051 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4053 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4054 and likewise for all the dbxx opcodes.
4056 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4058 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4060 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4062 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4063 the VR4100 specific instructions to the mips_opcodes structure.
4065 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4067 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4068 ugly Metrowerks bug in CW6, is fixed in CW7.
4070 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4072 * ppc-opc.c (whole file): Add flags for common/any support.
4074 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4076 * Makefile.in (BISON): Remove macro.
4077 (FLAGS_TO_PASS): Remove BISON.
4079 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4081 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4083 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4084 instructions that take no args by looking at the match mask.
4085 (print_insn_arg): Always print "%" before register names.
4086 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4087 [case '_']: Don't print "@#" before address.
4088 [case 'J']: Use "%s" as format string, not register name.
4089 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4091 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4093 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4096 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4098 From David Mosberger-Tang <davidm@azstarnet.com>
4100 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4101 (alpha_insn_set): added definitions for VAX floating point
4102 instructions (Unix compilers don't generate these, but handcoded
4103 assembly might still use them).
4105 * alpha-dis.c (print_insn_alpha): added support for disassembling
4106 the miscellaneous instructions in the Alpha instruction set.
4108 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4110 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4111 no longer create sysdep.h, sed ppc-opc.c to work around a
4112 serious Metrowerks C bug.
4113 * mpw-make.in: Remove.
4114 * mpw-make.sed: New file, used by mpw-configure to edit
4115 Makefile.in into an MPW makefile.
4117 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4119 * Makefile.in (maintainer-clean): New synonym for realclean.
4121 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4123 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4124 which use '0', '1', and '2' instead. Specify the proper size for
4125 a pmove immediate operand. Correct the pmovefd patterns to be
4126 moves to a register, not from a register.
4127 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4129 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4131 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4132 %psr, %wim, %tbr as F_NOTV9.
4134 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4136 * Makefile.in (Makefile): Just rebuild Makefile when running
4138 (config.h, stamp-h): New targets.
4139 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4140 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4141 rebuilding config.h.
4142 * configure: Rebuild.
4144 * mips-opc.c: Change unaligned loads and stores with "t,A"
4145 operands to use "t,A(b)".
4147 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4149 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4151 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4153 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4154 until 3 instead of until 2.
4156 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4158 * Makefile.in (ALL_CFLAGS): Define.
4159 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4160 (MOSTLYCLEAN): Add config.log.
4161 (distclean): Don't remove config.log.
4162 * configure.in: Substitute HDEFINES.
4163 * configure: Rebuild.
4165 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4167 * sh-opc.h (sh_arg_type): Add F_FR0.
4168 (sh_table, case fmac): Add F_FR0 as first argument.
4170 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4172 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4174 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4176 * sparc-dis.c: Remove all references to NO_V9.
4178 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4180 * aclocal.m4: Just include ../bfd/aclocal.m4.
4181 * configure: Rebuild.
4183 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4185 * sparc-dis.c (X_DISP19): Define.
4186 (print_insn, case 'G'): Use it.
4187 (print_insn, case 'L'): Sign extend displacement.
4189 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4191 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4192 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4193 host_makefile_frag or frags.
4194 * aclocal.m4: New file.
4195 * configure: Rebuild.
4196 * Makefile.in (INSTALL): Set to @INSTALL@.
4197 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4198 (INSTALL_DATA): Set to @INSTALL_DATA@.
4200 (AR_FLAGS): Set to rc rather than qc.
4201 (CC): Define as @CC@.
4202 (CFLAGS): Set to @CFLAGS@.
4203 (@host_makefile_frag@): Remove.
4204 (config.status): Remove dependency upon @frags@.
4206 * configure.in: ../bfd/config.bfd now just sets shell variables.
4207 Use them rather than looking through target Makefile fragments.
4208 * configure: Rebuild.
4210 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4212 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4214 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4216 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4217 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4220 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4221 (lookup_{name,value}): New functions.
4222 (prefetch_table): New static local.
4223 (sparc_{encode,decode}_prefetch): New functions.
4224 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4226 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4228 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4231 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4233 * sh-dis.c: Correct comment on first line of file.
4235 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4237 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4239 * sparc-opc.c (asi, membar): New static locals.
4240 (sparc_{encode,decode}_{asi,membar}): New functions.
4241 (sparc_opcodes, membar insn): Fix.
4242 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4243 Support decoding of membar masks.
4246 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4250 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4252 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4253 and likewise for the other branches. Add bhs as an alias for bcc,
4254 and likewise for the size variants. Add dbhs as an alias for
4257 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4259 * sh-opc.h (FP sts instructions): Update to match reality.
4261 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4263 * m68k-dis.c: (fpcr_names): Add % before all register names.
4264 (reg_names): Likewise.
4265 (print_insn_arg): Don't explicitly print % before register names.
4266 Add % before register names in static array names. In case 'r',
4267 print data registers as `@(Dn)', not `Dn@'. When printing a
4268 memory address, don't print @# before it.
4269 (print_indexed): Change base_disp and outer_disp from int to
4270 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4271 syntax. Sign extend 8 byte displacement correctly.
4272 (print_base): Print using MIT syntax. Print zpc when appropriate.
4273 Change parameter disp from int to bfd_vma.
4275 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4278 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4280 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4281 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4282 * sh-opc.h (sh_arg_type): Add new operand types.
4283 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4285 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4287 * Makefile.in (distclean): Remove generated file config.h.
4289 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4291 * Makefile.in (distclean): Remove generated file config.h.
4293 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4295 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4297 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4299 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4300 rather than numopcodes. Use m68k_opcodes rather than removed
4301 opcode function. Don't check F_ALIAS.
4302 (print_insn_arg): Change first parameter to be const char *.
4303 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4304 (m68k-opc.o): New target.
4305 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4306 * configure: Rebuild.
4308 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4310 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4311 (opcode_bits, opcode_hash_table): New variables.
4312 (opcodes_initialized): Renamed from opcodes_sorted.
4313 (build_hash_table): New function.
4314 (is_delayed_branch): Use hash table.
4315 (print_insn): Renamed from print_insn_sparc, made static.
4316 Build and use hash table. If !sparc64, ignore sparc64 insns,
4317 and vice-versa if sparc64.
4318 (print_insn_sparc, print_insn_sparc64): New functions.
4319 (compare_opcodes): Move sparc64 opcodes to end.
4320 Print commutative insns with constant second.
4321 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4323 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4325 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4326 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4327 avoids printing a delay slot in a delay slot.
4328 * sh-opc.h (sh_table): Fully bracket last entry.
4330 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4332 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4334 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4336 * configure.in: Get host_makefile_frag from ${srcdir}.
4338 * configure.in: Autoconfiscated. Check for string[s].h. Create
4339 config.h from config.in. Don't set up sysdep.h link.
4340 * sysdep.h: New file.
4341 * configure, config.in: New files, generated from configure.in.
4342 * Makefile.in: Updated to be processed autoconf-style.
4343 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4344 (Makefile): Depend on config.status.
4345 (config.status): New rule.
4346 * configure.bat: Update Makefile substitutions.
4348 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4350 * mips-opc.c (L1): Define.
4351 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4352 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4355 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4357 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4358 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4359 have multiple add units but only a single logical unit.
4361 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4362 shifted by 18, without any insertion or extraction function.
4363 (insert_cr, extract_cr): Remove.
4365 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4367 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4370 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4372 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4373 * sh-opc.h: Add copyright.
4375 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4377 * Makefile.in (crunch-m68k): Delete extra target accidentally
4378 checked in a while ago.
4380 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4382 * sh-opc.h (sh_table): Add SH3 support.
4384 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4386 * sh-opc.h: Added bsrf and braf.
4388 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4390 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4391 bogus [ls]fm{ea,fd} patterns.
4393 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4394 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4395 initialize it from memory. Make function static.
4396 (print_insn_{big,little}_arm): New functions.
4397 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4398 the correct endianness.
4400 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4402 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4405 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4407 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4408 17th, so that it builds again using GCC as the compiler.
4410 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4412 * mips-dis.c (print_insn_little_mips): Cast return value from
4413 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4414 expects an unsigned long, and that might be fewer words of
4415 argument storage (e.g., if bfd_vma is long long on a 32-bit
4417 (print_insn_big_mips): Likewise with bfd_getb32 value.
4418 (_print_insn_mips): Now static.
4420 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4422 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4423 gcc memory hog problem with initializer is fixed.
4425 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4427 Merge in support for Mac MPW as a host.
4428 (Old change descriptions retained for informational value.)
4430 * mpw-config.in (archname): Compute from the config.
4431 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4433 * mpw-config.in (target_arch): Compute from canonical target.
4434 (m68k, mips, powerpc, sparc): Add architectures.
4435 * mpw-make.in (disassemble.c.o): Add.
4436 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4438 * mpw-config.in (BFD_MACHINES): Set to a default value.
4439 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4441 * mpw-make.in (CSEARCH): Add extra-include to search path.
4443 * mpw-config.in (varargs.h): Don't create.
4444 (sysdep.h): Create using forward-include.
4445 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4447 * mpw-config.in: New file, MPW version of configure.in.
4448 * mpw-make.in: New file, MPW version of Makefile.in.
4450 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4452 * alpha-dis.c (print_insn_alpha): Put empty statement after
4455 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4457 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4458 (low_sign_extend): Likewise.
4459 (get_field): Delete unused function.
4460 (set_field, deposit_14, deposit_21): Likewise.
4462 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4464 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4467 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4469 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4471 * alpha-opc.h (OSF_ASMCODE): define
4472 print pal-code names as defined in App C of the
4473 Alpha Architecture Reference Manual
4475 * alpha-dis.c: cleaned up output
4476 print stylized code forms as defined in App A.4.3 of the
4477 Alpha Architecture Reference Manual
4479 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4481 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4483 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4486 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4488 * m68k-dis.c (opcode): New function. Returns address of opcode
4489 table entry given index, even if the opcode table was split to
4490 work around gcc bugs.
4491 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4493 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4494 (reg_names): Now const.
4495 (print_insn_arg): Arrays cacheFieldName and names now const.
4496 (print_indexed): Array scales now const.
4498 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4500 * ppc-opc.c: Sort recently added instructions by minor opcode
4501 number within major opcode number.
4503 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4505 * hppa-dis.c: Include libhppa.h.
4507 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4509 * mips-opc.c: Change dli to use M_DLI, and add dla.
4511 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4513 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4515 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4517 * mips-opc.c: Add r4650 mul instruction.
4519 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4521 * mips-opc.c: Add uld and usd macros for unaligned double load and
4524 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4526 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4527 mfdcr, mtdcr, icbt, iccci.
4529 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4531 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4532 signed char fields to shorts, more portable.
4534 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4536 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4537 char fields as signed chars, since they may have negative values.
4539 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4541 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4542 (mycroft@netbsd.org).
4544 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4546 From "Logg, Ed" <elogg@ea.com>:
4547 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4548 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4551 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4553 * ppc-opc.c: Changes based on patch from David Edelsohn
4554 <edelsohn@mhpcc.edu>.
4555 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4558 (insert_tbr): New static function.
4559 (extract_tbr): New static function.
4560 (XFXFXM_MASK, XFXM): Define.
4561 (XSPRBAT_MASK, XSPRG_MASK): Define.
4562 (powerpc_opcodes): Add instructions to access special registers by
4563 name. Add mtcr and mftbu.
4565 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4567 * mips-opc.c (P3): Define.
4568 (mips_opcodes): Add mad and madu.
4570 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4572 * configure.in: Add W65 support.
4573 * disassemble.c: Likewise.
4574 * w65-opc.h, w65-dis.c: New files.
4576 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4578 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4581 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4583 * mips-opc.c: Add dli as a synonym for li.
4585 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4587 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4588 print something for reserved opcode values, even if it won't
4591 * mips-dis.c (_print_insn_mips): When initializing, shift right
4592 and mask, to avoid sign extension problems on the Alpha.
4594 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4597 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4599 * sh-opc.h (mov.l gbr): Get direction right.
4600 * sh-dis.c (print_insn_shx): New function.
4601 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4602 print opcodes with right byte order.
4604 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4606 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4607 to avoid conflicts with getopt.
4609 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4611 * hppa-dis.c (print_insn_hppa): Read the instruction using
4612 bfd_getb32, so that it works on a little endian or 64 bit host.
4613 Remove unused local variable op.
4615 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4617 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4618 addu does not work correctly if -mips3.
4620 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4622 * a29k-dis.c (print_special): Add special register names defined
4623 on 29030, 29040 and 29050.
4624 (print_insn): Handle new operand type 'I'.
4626 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4628 * Makefile.in (INSTALL): Use top level install.sh script.
4630 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4632 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4633 that it works on a little endian host.
4635 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4637 * configure.in: Use ${config_shell} when running config.bfd.
4639 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4641 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4643 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4645 * a29k-dis.c (print_insn): Print the opcode.
4647 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4649 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4651 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4653 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4655 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4657 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4658 which store a value into memory.
4660 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4662 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4663 * arm-dis.c, arm-opc.h: New files.
4665 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4667 * Makefile.in (ns32k-dis.o): Add dependency.
4668 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4669 string, not as array of chars.
4671 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4673 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4675 * sparc-opc.c: Added sparclite extended FP operations, and
4676 versions of v9 impdep* instructions permitting specification of
4679 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4681 * i960-dis.c (reg_names): Now const.
4682 (struct sparse_tabent): New type, copied from array type in mem
4684 (ctrl): Local static array ctrl_tab now const.
4685 (cobr): Local static array cobr_tab now const.
4686 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4687 static variable mem_tab no longer explicitly initialized. Changed
4688 mem_init to const array of struct sparse_tabent.
4689 (reg): Local static variable reg_tab no longer explicitly
4690 initialized. Changed reg_init to const array of struct
4692 (ea): Local static array scale_tab now const.
4694 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4697 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4699 * configure.bat: the disassember needs to be enabled for
4700 "objdump -d" to work in djgpp.
4702 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4704 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4705 (invalid_float): Enabled general version, doesn't require running
4706 on ns32k host. Changed to take char* argument, and test for
4707 explicitly specified sizes, instead of using sizeof() on host CPU
4709 (INVALID_FLOAT): Cast first argument.
4710 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4711 list_P032, list_M032): Now const.
4712 (optlist, list_search): Made appropriate arguments now point to
4714 (print_insn_arg): Changed static array of one-character-string
4715 pointers into a static const array of characters; fixed sprintf
4716 statement accordingly.
4718 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4720 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4721 from distribution. A ns32k-dis.c from a previous distribution has
4722 been brought up to date and supports the new interface.
4724 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4726 * configure.in: add bfd_ns32k_arch target support.
4728 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4729 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4731 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4733 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4736 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4738 * h8300-dis.c, mips-dis.c: Don't use true and false.
4740 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4742 * configure.in: Change --with-targets to --enable-targets.
4744 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4746 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4747 opcodes to the first instruction with that opcode, to speed
4748 disassembly of large files. From ralphc@pyramid.com (Ralph
4751 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4753 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4755 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4757 * configure.bat: update to latest makefile.in
4759 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4761 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4762 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4763 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4764 slot insn is in a delay slot.
4765 * z8k-opc.h: (resflg): Fix patterns.
4766 * h8500-opc.h Fix CR insn patterns.
4768 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4770 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4771 "cmpl" before POWER versions, so that gas -many uses them.
4773 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4775 * disassemble.c: New file.
4776 * Makefile.in (OFILES): Add disassemble.o.
4777 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4778 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4779 binutils/configure.in.
4781 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4782 opcode being examined.
4784 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4787 (insert_ral, insert_ram, insert_ras): New functions.
4788 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4789 RAS for store with update.
4791 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4794 (edelsohn@npac.syr.edu).
4796 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4798 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4801 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4803 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4805 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * ppc-opc.c (powerpc_operands): The signedp field has been
4808 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4809 instead. Add new operand SISIGNOPT.
4810 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4811 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4812 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4815 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4817 * i386-dis.c (struct private): Renamed to dis_private. `private'
4818 is a reserved word for dynix cc.
4820 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4822 * configure.in: Change error message to refer to bfd/config.bfd
4823 rather than bfd/configure.in.
4825 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4827 * ppc-opc.c: Define POWER2 as short alias flag.
4828 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4831 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4833 * i960-dis.c (print_insn_i960): Don't read a second word for
4834 opcodes 0, 1, 2 and 3.
4836 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4838 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4840 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * m68881-ext.c: Removed; no longer used.
4843 * Makefile.in: Changed accordingly.
4845 * m68k-dis.c (ext_format_68881): Don't declare.
4846 (print_insn_m68k): If an instruction uses place 'i', it uses at
4847 least four fixed bytes.
4848 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4849 extended float, convert to double using floatformat_to_double, not
4850 ieee_extended_to_double, and fetch the data before converting it.
4852 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4854 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4855 davidj@ICSI.Berkeley.EDU (David Johnson).
4857 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4859 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4860 PowerPC uses bdnz[l][a].
4862 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4864 * dis-buf.c, i386-dis.c: Include sysdep.h.
4866 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4868 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4870 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4871 by Motorola PowerPC 601 with PPC_OPCODE_601.
4872 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4873 Disassemble Motorola PowerPC 601 instructions as well as normal
4874 PowerPC instructions.
4876 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4878 * i960-dis.c (reg, mem): Just use a static array instead of
4881 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4883 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4884 condition name index if this is for a negated condition.
4886 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4887 Floating point format for 'H' operand is backwards from normal
4888 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4889 operands (fmpyadd and fmpysub), handle bizarre register
4890 translation correctly for single precision format.
4892 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4893 or 'I' operands if the next format specifier is 'M' (fcmp
4894 condition completer).
4896 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4898 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4899 single number giving a bitmask for the MB and ME fields of an M
4900 form instruction. Change NB to accept 32, and turn it into 0;
4901 also turn 0 into 32 when disassembling. Seperated SH from NB.
4902 (insert_mbe, extract_mbe): New functions.
4903 (insert_nb, extract_nb): New functions.
4904 (SC_MASK): Mask out SA and LK bits.
4905 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4906 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4907 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4908 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4909 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4910 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4911 (powerpc_macros): Define table of macro definitions.
4912 (powerpc_num_macros): Define.
4914 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4915 if PPC_OPERAND_NEXT is set.
4917 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4919 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4920 char. Retrieve contents using bfd_getl32 instead of shifting.
4922 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4924 * ppc-opc.c: New file. Opcode table for PowerPC, including
4925 opcodes for POWER (RS/6000).
4926 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4927 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4928 (CFILES): Add ppc-dis.c.
4929 (ppc-dis.o, ppc-opc.o): New targets.
4930 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4932 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4934 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4935 No space before 'u', 'f', or 'N'.
4937 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4939 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4940 farther than we should.
4942 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4944 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4946 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4948 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4950 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4951 needs it, to prevent reading past the end of a section.
4953 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4955 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4956 Removed t,A case for la; always use t,A(b) case.
4958 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4960 From Ted Lemen <mellon@pepper.ncd.com>
4961 * mips-dis.c (print_insn_arg): Handle 'k'.
4962 * mips-opc.c: Make cache use k, not t.
4964 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4966 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4967 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4968 FLOAT_FORMAT_CODE to put out floating point register names.
4970 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4972 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4974 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4976 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4978 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4980 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4981 larger than 32. Moved dsxx32 variants first for disassembler.
4983 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4985 * z8kgen.c, z8k-opc.h: Add full lda information.
4987 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4989 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4990 movb instructions. Any necessary space will be emitted by
4991 the code to handle nullification completers.
4993 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4995 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4997 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4999 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5000 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5002 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5004 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5006 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5008 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5009 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5011 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5013 * m88k-dis.c (m88kdis): comment change. Remove space after
5015 (printop): handle new arg types DEC and XREG for m88110.
5017 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5019 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5020 type for absolute branch addresses. Delete special
5021 "ble" and "be" code in 'W' operand code.
5023 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5025 * mips-opc.c: Set hazard information correctly for branch
5026 likely instructions.
5028 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5030 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5031 info->fprintf_func for printing and info->print_address_func for
5034 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5036 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5038 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5040 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5041 Corrected second case of "b" for disassembler.
5043 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5045 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5046 to BFD swapping routines to correspond to BFD name changes.
5048 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * mips-opc.c: Change div machine instruction to be z,s,t rather
5051 than s,t. Change div macro to be d,v,t rather than d,s,t.
5052 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5053 rem and remu which generates only the corresponding div
5054 instruction. This is for compatibility with the MIPS assembler,
5055 which only generates the simple machine instruction when an
5056 explicit destination of $0 is used.
5057 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5059 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5061 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5062 WR_31 hazard for bal, bgezal, bltzal.
5064 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5066 * hppa-dis.c (print_insn_hppa): Use print function
5067 from within the disassemble_info, not fprintf_filtered.
5069 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5071 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5072 Law, law@cs.utah.edu.)
5074 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5076 * mips-opc.c ("absu"): Removed.
5079 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5081 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5082 Changed hazard information to distinguish between memory load
5083 delays and coprocessor load delays.
5085 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5087 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5089 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5091 * configure.in: Don't pass cpu to config.bfd.
5093 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5095 * m88k-dis.c (m88kdis): Make class unsigned.
5097 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5099 * alpha-dis.c (print_insn_alpha): One branch format case was
5100 missing the instruction name.
5102 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5104 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5105 Add the arch-specific auxiliary files.
5106 (OFILES): Remove the arch-specific auxiliary files
5107 and use BFD_MACHINES instead of DIS_LIBS.
5108 * configure.in: Set BFD_MACHINES based on --with-targets option.
5110 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5112 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5115 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5117 * sparc-opc.c: Change CONST to const to deal with gcc
5118 -Dconst=__const -traditional.
5120 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5122 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5123 coprocessor instructions out of #if 0, and made them use new
5126 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5128 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5130 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5132 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5133 instruction, for use by the disassembler.
5135 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5136 hand-coded sign extensions that depended on 32-bit host ints.
5137 FIXME, we still depend on big-endian host bitfield ordering.
5138 (sparc_print_insn): Set the insn_info_valid field, and the
5139 other fields that describe the instruction being printed.
5141 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5143 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5144 `jmp' instead of just one of them.
5146 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5148 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5149 (fput_fp_reg_r): Renamed from fput_reg_r.
5150 (fput_fp_reg): New function.
5151 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5153 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5155 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5157 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5159 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5161 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5162 don't output a space.
5164 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5166 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5168 * mips-opc.c: New file, containing opcode table from
5169 ../include/opcode/mips.h.
5170 * Makefile.in: Add it.
5172 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5174 * m88k-dis.c: New file, moved in from gdb and changed to use the
5175 new dis-asm.h disassembler interface.
5176 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5177 (m88k-dis.o): New target.
5179 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5181 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5182 argument string const char * to correspond to opcode/mips.h.
5184 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5186 * mips-dis.c: Updated to account for name changes in new version
5188 * Makefile.in: Added header file dependencies.
5190 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5192 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5194 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5196 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5197 extend, rather than shifts.
5199 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5201 * Makefile.in: Undo 15 June change.
5203 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5205 * m68k-dis.c (print_insn_arg): Change return value to byte count
5207 * m68k-dis.c: Re-write to detect invalid operands before
5208 printing anything, so we can handle this the same way we
5209 handle invalid opcodes.
5211 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5213 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5215 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5217 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5220 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5222 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5224 * configure.in: Do make sysdep.h link.
5225 * Makefile.in: Search ../include. Don't search ../bfd.
5227 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5229 Changes from Jeff Law, law@cs.utah.edu:
5230 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5231 Do not print a space before the completers specified by
5234 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5236 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5237 defined, since gdb has been fixed.
5239 Changes from Jeff Law, law@cs.utah.edu:
5240 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5241 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5242 be a *disassemble_info, not a *FILE.
5243 * hppa-dis.c: Support 'd', '!', and 'a'.
5244 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5245 * hppa-dis.c: Delete cases which are no longer needed.
5247 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5249 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5251 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5253 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5256 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5258 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5259 * configure.in: No longer need to configure to get sysdep.h.
5261 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5263 * Patches from Jeffrey Law <law@cs.utah.edu>.
5264 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5265 templates for 1.1 FP computational instructions.
5267 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5269 * h8500-dis.c (print_insn_h8500): Address argument is type
5271 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5274 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5275 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5277 * sparc-dis.c (compare_opcodes): Move static declaration to
5280 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5282 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5283 instruction, remove unimp hack from 'l' argument.
5285 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5287 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5290 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5292 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5293 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5296 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5298 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5299 arrays of string pointers to 2-d arrays of chars, to save
5302 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5304 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5305 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5307 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5309 * hppa-dis.c: New file from Utah, adapted to new disassembler
5311 * Makefile.in: Include it.
5313 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5315 * sh-dis.c, sh-opc.h: New files.
5317 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5319 * alpha-dis.c, alpha-opc.h: New files.
5321 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5323 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5326 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5328 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5330 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5332 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5335 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5337 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5338 and double percent signs a few places.
5340 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5342 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5343 Use info->print_address_func not print_address.
5345 * dis-buf.c (generic_print_address): New function.
5347 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5349 * Makefile.in: Add sparc-dis.c.
5350 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5352 Add `add' instruction to the set that get checked
5353 for a preceding `sethi' in order to print an absolute address.
5354 * (print_insn): Disassembly prefers real instructions.
5355 (is_delayed_branch): Speed up.
5356 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5357 Still missing some float ops, and needs testing.
5358 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5359 F_ALIAS. Use printf, not fprintf, when not passing a file
5361 (compare_opcodes): Check that identical instructions have
5362 identical opcodes, complain otherwise.
5365 * Include reg_names.
5367 Use dis-asm.h/read_memory_func interface.
5369 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5371 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5372 deliberately return non-zero to setjmp from longjmp. Otherwise
5373 this code fails to compile.
5375 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5377 * m68k-dis.c: Fix prototype for fetch_arg().
5379 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5381 * dis-buf.c: New file, for new read_memory_func interface.
5382 Makefile.in (OFILES): Include it.
5383 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5384 Use new read_memory_func interface.
5386 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5388 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5389 * h8500-opc.h: Fix couple of opcodes.
5391 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5393 * Makefile.in: add dvi & installcheck targets
5395 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5397 * Makefile.in: Update for h8500-dis.c.
5399 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5401 * h8500-dis.c, h8500-opc.h: New files
5403 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5405 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5406 ../include/dis-asm.h.
5407 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5408 and ../gdb/m68k-pinsn.c).
5409 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5410 and ../gdb/i386-pinsn.c).
5411 * m68881-ext.c: New file. Moved definition of
5412 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5413 * Makefile.in: Adjust for new files.
5414 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5415 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5416 can be dis-assembled.
5418 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5420 * mips-dis.c (print_insn_arg): Now returns void.
5422 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5424 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5425 files that use the macros.
5427 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5429 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5430 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5431 (CFILES): Added mips-dis.c.
5433 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5435 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5436 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5438 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5440 * Makefile.in: Improve *clean rules.
5441 * configure.in: Allow a default host.
5443 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5445 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5446 files include other sysdep files
5448 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5450 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5452 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5454 * configure.in: For host support, use ../bfd/configure.host
5455 so it stays in sync with the ../bfd/hosts database.
5457 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5459 * configure.in: use cpu-vendor-os triple instead of nested cases
5461 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5463 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5464 *always* the wrong one.
5466 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5468 * z8kgen.c: added copyright info
5470 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5472 * z8k-dis.c (unparse_instr): prettier tabs
5473 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5475 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5477 * configure.in: Add ncr* configuration.
5478 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5479 picayune ANSI compilers happy.
5481 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5483 * configure.in (i386): Make i386 and i486 synonymous for now.
5484 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5486 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5488 * Makefile.in (install): Fix typo.
5490 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5492 * Makefile.in (make): Remove obsolete crud.
5493 (sparc-opc.o): Avoid Sun Make VPATH bug.
5495 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5497 * Makefile.in: since there are no SUBDIRS, remove rule and
5498 references of subdir_do.
5500 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5502 * Makefile.in (install): Get the library name right here too.
5503 Don't install bfd.h, since it's unrelated to this library. No
5504 subdirs to recurse into, either.
5505 (CFILES): The source file has a .c suffix, not .o.
5507 * sparc-opc.c: New file, moved from BFD.
5508 * Makefile.in (OFILES): Build it.
5510 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5512 * z8k-dis.c: fixed forward refferences of some declarations.
5514 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5516 * Makefile.in: get the name of the library right
5518 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5520 * z8k-dis.c: knows how to disassemble z8k stuff
5521 * z8k-opc.h: new file full of z8000 opcodes
5525 version-control: never