1 1999-06-21 Ian Lance Taylor <ian@zembu.com>
3 * alpha-dis.c: Don't include <stdlib.h>.
4 * arm-dis.c: Include "sysdep.h".
5 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
7 * Makefile.am: Rebuild dependencies.
8 * Makefile.in: Rebuild.
10 1999-06-16 Nick Clifton <nickc@cygnus.com>
12 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
15 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
17 * arm-dis.c (arm_regnames): Turn into a pointer to a register
19 (arm_regnames_standard): New variable: Array of ARM register
20 names according to ARM instruction set nomenclature.
21 (arm_regnames_apcs): New variable: Array of ARM register names
22 according to ARM Procedure Call Standard.
23 (arm_regnames_raw): New variable: Array of ARM register names
24 using just 'r' and the register number.
25 (arm_toggle_regnames): New function: Toggle the chosen register set
27 (parse_disassembler_options): New function: Parse any target
28 disassembler command line options.
29 (print_insn_big_arm): Call parse_disassembler_options if any
31 (print_insn_little_arm): Call parse_disassembler_options if any
34 1999-06-13 Ian Lance Taylor <ian@zembu.com>
36 * i386-dis.c (FWAIT_OPCODE): Define.
37 (used_prefixes): New static variable.
38 (fetch_data): Don't print an error message if we have already
39 fetched some bytes successfully.
40 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
41 (prefix_name): New static function.
42 (print_insn_i386): If setjmp fails, indicating a data error, but
43 we have managed to fetch some bytes, print the first one as a
44 prefix or a .byte pseudo-op. If fwait is followed by a non
45 floating point instruction, print the first prefix. Set
46 used_prefixes when prefixes are used. If any prefixes were not
47 used after disassembling the instruction, print the first prefix
48 instead of printing the instruction.
49 (putop): Set used_prefixes when prefixes are used.
50 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
51 (OP_DIR, OP_SIMD_Suffix): Likewise.
53 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
55 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
56 Support signx %reg, clruw %reg.
58 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
60 * sparc-opc.c: Add aliases Solaris as supports.
62 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
64 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
65 * Makefile.in: Regenerated.
67 1999-06-03 Philip Blundell <philb@gnu.org>
69 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
70 when target is PC-relative.
72 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
74 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
77 * m68k-dis.c (fetch_arg): Add places `n', `o'.
79 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
80 Add mcf5206e to appropriate instructions.
81 Add alias for MAC, MSAC.
83 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
86 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
87 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
89 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
91 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
93 * i386-dis.c (Ed): Define.
94 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
96 (OP_rm): Rename to OP_Rd.
99 (putop): Add const to template and p.
100 (print_insn_x86): Delete.
101 (print_insn_i386): Merge old function print_insn_x86. Add const
103 (struct dis386): Add const to name.
104 (dis386_att, dis386_intel): Add const.
105 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
106 (names32, names16, names8, names_seg, index16): Add const.
107 (grps, prefix_user_table, float_reg): Add const.
108 (float_mem_att, float_mem_intel): Add const.
109 (oappend): Add const to s.
110 (OP_REG): Add const to s.
111 (ptr_reg): Add const to s.
112 (dofloat): Add const to dp.
113 (OP_C): Don't skip modrm, it's now done in OP_Rd.
116 (OP_Rd): Check for valid mod. Call Op_E to print.
117 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
118 (OP_MS): Check for valid mod. Call Op_EM to print.
119 (OP_3DNowSuffix): Set obufp and use oappend rather than
120 strcat. Call BadOp() for errors.
121 (OP_SIMD_Suffix): Likewise.
122 (BadOp): New function.
124 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
126 * i386-dis.c (dis386_intel): Remove macro chars, except for
127 jEcxz. Change cWtR and cRtd to cW and cR.
128 (dis386_twobyte_intel): Remove macro chars here too.
129 (putop): Handle R and W macros for intel mode.
131 * i386-dis.c (SIMD_Fixup): New function.
132 (dis386_twobyte_att): Use it on movlps and movhps, and change
133 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
134 (dis386_twobyte_intel): Same here.
136 * i386-dis.c (Av): Remove.
140 (OP_SIMD_Suffix): New function.
141 (OP_DIR): Remove dead code.
142 (eAX_reg..eDI_reg): Renumber.
143 (onebyte_has_modrm): Table numbering comments.
144 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
145 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
146 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
147 and handle SIMD cmp insns in OP_SIMD_Suffix.
148 (info->bytes_per_line): Bump from 5 to 6.
150 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
151 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
153 PIII SIMD support from Doug Ledford <dledford@redhat.com>
154 * i386-dis.c (XM, EX, None): Define.
155 (OP_XMM, OP_EX, OP_None): New functions.
156 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
157 (GRP14): Rename to GRPAMD.
158 (GRP*): Add USE_GROUPS flag.
160 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
161 (twobyte_has_modrm): Add SIMD entries.
162 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
163 (grps): Add SIMD insns.
164 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
165 oappend repz if uses_f3_prefix. Add code to handle new groups for
168 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
169 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
170 operand from Av to Jv.
172 1999-05-07 Nick Clifton <nickc@cygnus.com>
174 * mcore-dis.c (print_insn_mcore): Use .short to display
175 unidentified instructions, not .word.
177 1999-04-26 Tom Tromey <tromey@cygnus.com>
179 * aclocal.m4, configure: Updated for new version of libtool.
181 1999-04-14 Doug Evans <devans@casey.cygnus.com>
183 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
184 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
186 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
188 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
191 1999-04-10 Doug Evans <devans@casey.cygnus.com>
193 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
194 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
196 1999-04-06 Ian Lance Taylor <ian@zembu.com>
198 * opintl.h (LC_MESSAGES): Never define.
200 1999-04-04 Ian Lance Taylor <ian@zembu.com>
202 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
203 (separator_char, scale_char): Likewise.
204 (print_insn_x86): Likewise.
205 (print_insn_i386): Likewise. Add declaration.
207 1999-03-26 Doug Evans <devans@casey.cygnus.com>
209 * fr30-dis.c: Rebuild.
210 * m32r-dis.c: Rebuild.
212 1999-03-23 Ian Lance Taylor <ian@zembu.com>
214 * m68k-opc.c: Change compare instructions to use "@s" rather than
215 ";s" when used with an immediate operand.
217 1999-03-22 Doug Evans <devans@casey.cygnus.com>
219 * cgen-opc.c (cgen_set_cpu): Delete.
220 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
221 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
223 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
225 * po/opcodes.pot: Rebuild.
227 1999-03-16 Martin Hunt <hunt@cygnus.com>
229 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
231 1999-03-11 Doug Evans <devans@casey.cygnus.com>
233 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
234 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
235 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
236 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
237 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
238 * m32r-opinst.c: Rebuild.
240 1999-02-25 Doug Evans <devans@casey.cygnus.com>
242 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
243 (cgen_hw_lookup_by_num): Rewrite.
244 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
245 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
246 * m32r-opinst.c: Rebuild.
248 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
250 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
251 (insert_jhint): Fix insertion mask.
252 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
254 1999-02-10 Doug Evans <devans@casey.cygnus.com>
256 * Makefile.in: Rebuild.
258 1999-02-09 Doug Evans <devans@casey.cygnus.com>
260 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
261 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
262 * Makefile.am: Remove references to them.
263 (HFILES): Add fr30-desc.h,m32r-desc.h.
264 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
266 (ALL_MACHINES): Update.
267 * configure.in: Redo handling of cgen_files.
268 (bfd_i960_arch): Delete i960c-*.lo files.
269 * configure: Regenerate.
270 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
271 (hash_insn_array): Rewrite.
272 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
273 (hash_insn_array): Rewrite.
274 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
275 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
276 (cgen_lookup_get_insn_operands): Ditto.
277 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
278 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
279 * po/POTFILES.in: Rebuild.
280 * po/opcodes.pot: Rebuild.
282 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
284 * Makefile.am: Rebuild dependencies.
285 (HFILES): Add fr30-opc.h.
286 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
287 * Makefile.in: Rebuild.
289 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
290 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
292 * acconfig.h: Remove.
293 * configure: Rebuild with current autoconf/automake.
294 * aclocal.m4: Likewise.
295 * config.in: Likewise.
296 * Makefile.in: Likewise.
298 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
300 * m68k-opc.c: Correct move (not movew) to status word on 5200.
302 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
304 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
305 * i386-dis.c (x_mode): Define.
309 (dis386_twobyte): Remove.
310 (dis386_twobyte_att): New.
311 (dis386_twobyte_intel): New.
312 (print_insn_x86): Use new arrays.
314 (float_mem_intel): New.
315 (float_mem_att): New.
316 (dofloat): Use new float_mem arrays.
317 (print_insn_i386_att): New.
318 (print_insn_i386_intel): New.
319 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
320 (putop): Handle intel syntax.
321 (OP_indirE): Handle intel syntax.
322 (OP_E): Handle intel syntax.
323 (OP_I): Handle intel syntax.
324 (OP_sI): Handle intel syntax.
325 (OP_OFF): Handle intel syntax.
329 1999-01-27 Doug Evans <devans@casey.cygnus.com>
331 * fr30-opc.h,fr30-opc.c: Rebuild.
332 * i960c-opc.h,i960c-opc.c: Rebuild.
333 * m32r-opc.c: Rebuild.
335 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
337 * hppa-dis.c: revert HP merge changes until HP gives us
340 1999-01-19 Nick Clifton <nickc@cygnus.com>
342 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
343 offsets as well as symbloic address.
345 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
347 * hppa-dis.c: fix comments and some indentation.
349 1999-01-12 Doug Evans <devans@casey.cygnus.com>
351 * fr30-opc.c,i960c-opc.c: Regenerate.
353 1999-01-11 Doug Evans <devans@casey.cygnus.com>
355 * fr30-opc.c: Regenerate.
357 1999-01-06 Doug Evans <devans@casey.cygnus.com>
359 * m32r-dis.c: Regenerate.
361 1999-01-05 Doug Evans <devans@casey.cygnus.com>
363 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
364 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
365 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
367 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
369 * configure.in: Require autoconf 2.12.1 or higher.
371 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
373 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
375 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
377 * fr30-opc.c: Regenerated.
379 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
381 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
383 1998-12-15 Dave Brolley <brolley@cygnus.com>
385 * fr30-opc.c,fr30-opc.h: Regenerated.
387 1998-12-14 Dave Brolley <brolley@cygnus.com>
389 * fr30-opc.c,fr30-opc.h: Regenerated.
391 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
393 * fr30-opc.c,fr30-opc.h: Regenerated.
395 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
397 * m32r-opc.c: Regenerate.
399 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
401 * dis-buf.c (generic_strcat_address): reformat to GNU coding
402 conventions. change sprintf call to an sprintf_vma call.
404 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
406 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
408 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
410 The following changes were made by
411 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
412 David Taylor <taylor@texas.cygnus.com>, and
413 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
414 merge in changes by HP; HP did not create ChangeLog entries.
416 * dis-buf.c (generic_strcat_address): new function.
418 * hppa-dis.c: Changes to improve hppa disassembly.
419 Changed formatting in : reg_names, fp_reg_names,control_reg,
420 New variables : sign_extension_names, deposit_names, conversion_names
421 float_test_names, compare_cond_names_double, add_cond_names_double,
422 logical_cond_names_double, unit_cond_names_double,
423 branch_push_pop_names, saturation_names, shift_names, mix_names,
424 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
425 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
426 (fput_const): renamed as fput_hex_const
428 - use the macros fputs_filtered and
429 fput_decimal_const whenever possible; calls to sign_extend require
430 2 params -- add a missing second param of 0.
431 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
432 architecture version number of current machine. HP folks are
433 trying to handle situation where the target program was compiled
434 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
436 - added new cases : 'g', 'B', 'm'
437 - added cases specifically for PA 2.0
438 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
439 - calls to fput_const become calls to fput_hex_const
441 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
443 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
444 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
445 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
446 * Makefile.in: Rebuilt.
447 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
449 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
450 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
452 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
454 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
456 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
458 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
460 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
461 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
463 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
465 * fr30-opc.c: Regenerate.
467 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
469 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
471 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
473 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
475 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
477 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
479 1998-11-30 Doug Evans <devans@casey.cygnus.com>
481 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
482 CGEN_INSN_BASE_VALUE.
483 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
484 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
486 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
488 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
490 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
492 * fr30-asm.c,fr30-dis.c: Regenerated.
494 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
496 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
498 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
500 * fr30-opc.c: Regenerated.
502 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
504 * fr30-opc.c: Regenerated.
505 * fr30-opc.h: Regenerated.
506 * fr30-dis.c: Regenerated.
507 * fr30-asm.c: Regenerated.
509 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
511 * mips-opc.c (sync.p,sync.l): Swap insn values.
513 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
515 * fr30-opc.c: Regenerate.
517 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
519 * fr30-opc.c: Regenerated.
520 * fr30-opc.h: Regenerated.
522 1998-11-18 Doug Evans <devans@casey.cygnus.com>
524 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
525 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
527 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
529 * fr30-opc.c: Regenerated.
531 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
533 * fr30-opc.c: Regenerated.
534 * fr30-opc.h: Regenerated.
535 * fr30-dis.c: Regenerated.
536 * fr30-asm.c: Regenerated.
538 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
540 * po/opcodes.pot: Regenerated.
541 * fr30-opc.c: Regenerated.
542 * fr30-opc.h: Regenerated.
543 * fr30-dis.c: Regenerated.
544 * fr30-asm.c: Regenerated.
546 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
548 * disassemble.c (disassembler): Add support for FR30 target.
550 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
552 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
553 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
555 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
557 * po/opcodes.pot: Regenerate.
558 * po/POTFILES.in: Regenerate.
559 * fr30-opc.c: Regenerate.
560 * fr30-opc.h: Regenerate.
562 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
564 * m32r-asm.c: Regenerate.
566 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
568 * configure.in: Added case for bfd_fr30_arch.
569 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
570 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
571 (CLEANFILES): Added stamp-fr30.
573 * fr30-asm.c: New file.
574 * fr30-dis.c: New file.
575 * fr30-opc.c: New file.
576 * fr30-opc.h: New file.
577 * po/POTFILES.in: Regenerated
578 * po/opcodes.pot: Regenerated
580 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
582 * configure.in: detect cygwin* instead of cygwin32*
583 * configure: regenerate
585 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
587 * mips-opc.c (IS_M): Added.
589 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
591 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
593 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
595 * m32r-opc.h,m32r-opc.c: Regenerate.
597 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
599 * i386-dis.c (OP_3DNowSuffix): New static function.
602 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
603 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
604 (insn_codep): New static variable.
605 (print_insn_x86): Init insn_codep after prefixes.
606 (grps): Add GRP14 entries for prefetch, prefetchw.
609 From Jeff B Epler <jepler@usgs.gov>
610 * i386-dis.c (Suffix3DNow): New table.
612 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
614 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
616 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
618 * d10v-dis.c (print_operand): If num is nonzero, then
619 add OPERAND_ACC1, not OPERAND_ACC0.
621 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
623 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
626 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
628 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
631 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
633 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
635 1998-09-09 Michael Meissner <meissner@cygnus.com>
637 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
640 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
642 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
644 (print_insn_little_arm): Detect Thumb symbols in elf object
647 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
649 * alpha-dis.c (print_insn_alpha): Use the machine type to
650 decide which PALcode set to include.
652 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
654 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
656 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
658 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
659 MSUB and MSUBS instructions.
661 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
663 * ppc-opc.c (powerpc_operands): Omit parens around additions in
666 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
668 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
669 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
670 +, -, and d for ColdFire.
672 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
673 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
674 (extract_mbe): Likewise.
676 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
678 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
680 * m10300-opc.c: First cut at UDF instructions.
682 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
684 * m32r-opc.c: Regenerate (remove semantic descriptions).
686 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
688 * arm-dis.c (print_insn_big_arm): Fix indentation.
689 (print_insn_little_arm): Likewise.
691 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
693 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
695 (print_insn_little_arm): Likewise.
697 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
699 Move all global state data into opcode table struct, and treat
700 opcode table as something that is "opened/closed".
701 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
702 (cgen_asm_init): Delete.
703 (cgen_set_parse_operand_fn): New function.
704 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
705 (cgen_dis_init): Delete.
706 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
707 (cgen_current_{opcode_table_mach,endian}): Delete.
708 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
710 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
712 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
715 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
717 * m10300-opc.c: Add entries for "no_match_operands" field in
720 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
722 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
724 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
726 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
728 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
730 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
732 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
734 (OP_J): Remove unnecessary subtraction when 16-bit displacement
735 will be masked later.
737 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
739 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
741 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
743 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
745 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
747 * m10300-dis.c: Only recognize instructions from the currently
749 * m10300-opc.c: Add field indicating the particular variant of
750 the mn10300 each instruction is available on.
752 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
754 * configure.in: For bfd_vax_arch, build vax-dis.lo.
755 * Makefile.am: Rebuild dependencies.
756 (CFILES): Add vax-dis.c.
757 (ALL_MACHINES): Add vax-dis.lo.
758 * aclocal.m4: Rebuild with current libtool.
759 * configure, Makefile.in: Rebuild.
761 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
763 * vax-dis.c: New file, from work by Pauline Middelink
764 <middelin@polyware.iaf.nl>.
765 * disassemble.c (ARCH_vax): Define if ARCH_all.
766 (disassembler): Add case for ARCH_vax.
767 * makefile.vms: Support compilation on vms/vax.
769 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
771 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
772 related to sign extension and the size of ints.
774 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
776 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
777 instructions. Support (sp) addressing mode by expanding it into
780 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
782 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
784 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
786 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
788 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
790 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
793 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
795 * mips-dis.c (print_insn_little_mips): Previously, instruction
796 printing references the symbol table to determine whether the
797 instruction resides in a block regular instructions or mips16
798 instructions. However, when the disassembler gets used in other
799 environments where the symbol table is not present, we no longer
800 rely in the symbol table, rather, use the low bit of the
801 instructions address to guess. There should be no change for usage
802 of the disassembler in host based programs, gdb, objdump.
803 (print_insn_big_mips): ditto.
804 (print_insn_mips): ditto
806 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
808 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
810 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
812 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
814 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
816 * i386-dis.c (index16): Add '%' to register names. Use ','
819 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
821 * i386-dis.c: Don't print opcode suffix when we can figure out the
822 size (and gas can!) by register operands, or from the default
824 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
826 (dis386, dis386_twobyte, grps): Use new suffix macros.
827 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
828 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
829 order of cmps operands to agree with Intel docs. Correct operand
830 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
831 agree with Intel docs.
832 (print_insn_x86): Print orphan fwait before other prefixes.
833 Return correct byte count for orphan fwait with prefixes. Don't
834 print `bound' operands in reverse order.
835 (ckprefix): Stop accumulating prefixes if we get fwait.
836 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
838 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
840 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
841 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
843 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
845 Fix problems when bfd_vma is wider than long.
846 * i386-dis.c: Make op_address and start_pc unsigned.
847 (set_op): Make parameter unsigned.
848 (print_insn_x86): Cast to bfd_vma when passing a value to
850 * ns32k-dis.c (CORE_ADDR): Don't define.
851 (print_insn_ns32k): Change type of addr to bfd_vma. Use
852 bfd_scan_vma to read back address.
853 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
855 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
856 (NEXTULONG): New definition.
857 (print_insn_m68k): Avoid overflow when computing third argument of
859 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
860 Use disp instead of val to store offset values.
861 (print_indexed): Use base_disp instead of word to store base
862 displacement, to avoid overflow.
863 * m10300-dis.c (disassemble): Cast value to long when computing
864 pc-relative address, to get correct sign extension.
866 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
868 * m32r-opc.c: Regenerate.
870 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
872 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
873 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
875 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
877 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
879 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
881 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
883 (OP_DSreg): Rename from OP_DSSI.
884 (OP_ESreg): Rename from OP_ESDI.
885 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
887 (append_seg): Rename from append_prefix.
888 (ptr_reg): New function.
889 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
891 (PREFIX_ADDR): Rename from PREFIX_ADR.
892 (float_reg): Add non-broken opcodes for people who don't want
895 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
897 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
900 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
902 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
904 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
906 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
907 0; produce error message for shifts of size 32 (or 64 for 64-bit
908 shifts), because the hardware doesn't support them.
910 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
912 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
913 LONG_2, LONG_2b formats to use this new operand.
915 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
917 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
919 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
921 * sparc-dis.c (print_insn_sparc): big endian instruction / little
924 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
926 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
927 and SHORT_B3b formats to use Rb instead of Ra.
929 Add FLAG_MUL16 to MUL2XH opcode.
931 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
932 to existing 1.1.1 parallelisation prohibition procedure.
934 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
936 * m32r-asm.c,m32r-dis.c: Regenerate.
938 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
940 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
941 with a shift count of 0.
943 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
945 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
946 (cgen_hw_lookup_by_num): New function.
948 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
950 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
952 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
954 * sparc-dis.c (print_insn_sparc): Always fetch instructions
955 as big-endian on SPARClite.
957 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
959 * d30v-opc.c (pre_defined_register): Remove alias for r0.
961 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
963 * po/Make-in (install-info): New target.
965 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
967 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
968 * configure: Rebuild.
970 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
972 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
973 variety of ISA2 instructions to set bottom ten bits of trap code.
975 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
977 * Makefile.am (config.status): Add explicit target so that
978 config.status depends upon bfd/configure.in.
979 * Makefile.in: Rebuild.
981 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
983 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
984 instructions to set bottom ten bits of break code.
985 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
986 for above optional argument.
988 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
990 * makefile.vms: Run dec c with /nodebug.
992 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
994 * Makefile.in: Rebuilt.
995 * Makefile.am: Regenerated dependencies with mkdep.
997 * opintl.h (_): Define as dgettext.
999 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1001 * cgen-asm.c: Internationalised.
1002 * m32r-asm.c: Internationalised.
1003 * m32r-dis.c: Internationalised.
1004 * m32r-opc.c: Internationalised.
1006 * aclocal.m4: Regenerated.
1007 * configure: Regenerated.
1008 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1009 * Makefile.in: Rebuild.
1010 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1011 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1013 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1015 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1017 * aclocal.m4, configure: Rebuild with current tools.
1019 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1021 * opintl.h: New file - contains internationalisation macros used
1022 by source files in this directory.
1023 * po/: New subdirectory - contains internationalisation files.
1024 * po/Make-in: New file - Makefile constructor.
1025 * po/POTFILES.in: New file - list of files in opcodes directory
1026 that should be scan for internationalisation macros.
1027 * po/opcodes.pot: New file - list of internationisation strings
1028 found in files mentioned in po/POTFILES.in.
1029 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1030 entry. Add intl directory to include paths.
1031 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1032 HAVE_STRCPY, HAVE_LC_MESSAGES
1033 * configure.in: Add rule to build Makefile in po subdirectory.
1034 * Makefile.in: Rebuilt.
1035 * aclocal.m4: Rebuilt.
1036 * config.in: Rebuilt.
1037 * configure: Rebuilt.
1038 * alpha-opc.c: Internationalised.
1039 * arc-dis.c: Internationalised.
1040 * arc-opc.c: Internationalised.
1041 * arm-dis.c: Internationalised.
1042 * cgen-asm.c: Internationalised.
1043 * d30v-dis.c: Internationalised.
1044 * dis-buf.c: Internationalised.
1045 * h8300-dis.c: Internationalised.
1046 * h8500-dis.c: Internationalised.
1047 * i386-dis.c: Internationalised.
1048 * m10200-dis.c: Internationalised.
1049 * m10300-dis.c: Internationalised.
1050 * m68k-dis.c: Internationalised.
1051 * m88k-dis.c: Internationalised.
1052 * mips-dis.c: Internationalised.
1053 * ns32k-dis.c: Internationalised.
1054 * opintl.h: Internationalised.
1055 * ppc-opc.c: Internationalised.
1056 * sparc-dis.c: Internationalised.
1057 * v850-dis.c: Internationalised.
1058 * v850-opc.c: Internationalised.
1060 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1062 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1063 (asm_hash_table_entries): New variable.
1064 (cgen_asm_init): Free asm_hash_table_entries.
1065 (hash_insn_array,hash_insn_list): New functions.
1066 (build_asm_hash_table): Use them. Hash macro insns as well.
1067 (cgen_asm_lookup_insn): Update.
1068 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1069 (dis_hash_table_entries): New variable.
1070 (cgen_dis_init): Free dis_hash_table_entries.
1071 (hash_insn_array,hash_insn_list): New functions.
1072 (build_dis_hash_table): Use them. Hash macro insns as well.
1073 (cgen_dis_lookup_insn): Update.
1074 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1075 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1076 (cgen_macro_insn_count): New function.
1077 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1079 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1081 * i386-dis.c (OP_DSSI): Print segment override.
1083 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1085 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1088 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1090 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1091 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1092 * configure.in: Define and substitute WIN32LDFLAGS and
1094 * aclocal.m4: Rebuild with new libtool.
1095 * configure, Makefile.in: Rebuild.
1097 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1099 * m32r-opc.c: Regenerate.
1101 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1103 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1104 before trying to copy it.
1105 * Makefile.in: Rebuild.
1107 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1109 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1111 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1113 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1114 from an arbitrary valid buffer instead of fetching them on demand
1116 (invalid_float): use bit_extract_simple() instead of bit_extract().
1118 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1120 From H.J. Lu <hjl@gnu.org>:
1121 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1124 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1126 * Branched binutils 2.9.
1128 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1130 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1131 disassembling last 4 bytes of a section.
1133 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1135 Fix some gcc -Wall warnings:
1136 * arc-dis.c (print_insn): Add casts to avoid warnings.
1137 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1138 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1139 * m10200-dis.c (disassemble): Likewise.
1140 * m10300-dis.c (disassemble): Likewise.
1141 * ns32k-dis.c (print_insn_ns32k): Likewise.
1142 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1143 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1144 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1145 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1146 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1147 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1148 * tic80-dis.c (print_one_instruction): Likewise.
1149 * w65-dis.c (print_operand): Likewise.
1150 * z8k-dis.c (fetch_data): Likewise.
1151 * a29k-dis.c: Add return type for find_byte_func_type.
1152 * arc-opc.c: Include <stdio.h>. Remove declarations of
1153 insert_multshift and extract_multshift.
1154 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1156 (extract_value): Fully parenthesize expression.
1157 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1158 * h8500-opc.h (h8500_table): Fully bracket initializer.
1159 * w65-opc.h (optable): Likewise.
1160 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1161 * i386-dis.c (OP_E): Initialize local variables.
1162 * m10200-dis.c (print_insn_mn10200): Likewise.
1163 * mips-dis.c (print_insn_mips16): Likewise.
1164 * sh-dis.c (print_insn_shx): Likewise.
1165 * v850-dis.c (print_insn_v850): Likewise.
1166 * ns32k-dis.c (print_insn_arg): Declare.
1167 (get_displacement, invalid_float): Declare.
1168 (list_search, sign_extend, flip_bytes): Declare return type.
1169 (get_displacement): Likewise.
1170 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1172 (print_insn_ns32k): Make i unsigned.
1173 (invalid_float): Make static. Declare type of val.
1174 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1175 on each for iteration.
1176 * tic30-dis.c (get_indirect_operand): Likewise.
1177 * z8k-dis.c (print_insn_z8001): Declare return type.
1178 (print_insn_z8002): Likewise.
1179 (unparse_instr): Fix sprintf format strings.
1181 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1183 * mips-opc.c: Add "sync.l" and "sync.p".
1185 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1187 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1188 default m68k variant to recognize.
1190 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1191 (ctrl, cobr, mem, ea): Likewise.
1192 (print_addr): Likewise. Remove cast.
1193 (ea): Cast argument of print_addr to bfd_vma.
1195 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1197 (cgen_parse_unsigned_integer): Likewise.
1198 (cgen_parse_address): Likewise.
1200 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1202 * i960-dis.c (ctrl): Add full braces to structure initialization.
1203 (cobr, mem, reg): Likewise.
1204 (ea): Correct parenthesization in expression.
1206 * cgen-asm.c: Include <ctype.h>.
1207 (build_asm_hash_table): Remove unused local variable i.
1208 (cgen_parse_keyword): Add casts to avoid warnings.
1210 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1211 symbol. Fix indentation.
1212 (print_insn_little_arm): Likewise.
1214 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1216 * configure.in: Use AM_DISABLE_SHARED.
1217 * aclocal.m4, configure: Rebuild with libtool 1.2.
1219 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1221 These patches are courtesy of Jonathan Walton and Tony Thompson
1222 (athompso@cambridge.arm.com).
1224 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1227 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1228 both the offset and the label closest to the destination.
1230 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1232 * m32r-opc.h: Regenerate.
1234 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1236 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1238 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1240 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1241 assume that info->symbols is non-empty.
1243 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1245 * alpha-opc.c (cvtqs) There is no such thing.
1246 (cvttq): Missing most of the /*d variants.
1248 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1250 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1251 delayed branches or jumps.
1253 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1255 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1257 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1258 * tic30-dis.c (print_branch): Likewise.
1260 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1262 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1263 saved_symbol code as it is no longer needed.
1265 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1267 * cgen-asm.c: Include symcat.h.
1268 * cgen-dis.c,cgen-opc.c: Ditto.
1269 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1271 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1273 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1275 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1277 * m32r-opc.[ch]: Regenerate.
1279 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1281 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1282 arguments. Don't perform validation here.
1283 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1285 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1287 * m32r-opc.c: Regenerate.
1289 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1291 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1292 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1294 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1296 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1298 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1300 * configure.in: Get the version number from BFD.
1301 * configure: Rebuild.
1303 From H.J. Lu <hjl@gnu.org>:
1304 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1305 * Makefile.in: Rebuild.
1307 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1309 * m32r-opc.c: Regenerate.
1310 * m32r-opc.h: Regenerate.
1312 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1314 * m32r-opc.c: Regenerate.
1316 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1318 Fix rac to accept only a0:
1319 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1320 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1321 Introduce OPERAND_GPR.
1322 * d10v-dis.c (print_operand): Likewise.
1324 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1326 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1327 (cgen_hw_lookup): Make result const.
1328 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1330 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1332 * configure, aclocal.m4: Rebuild with new libtool.
1334 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1336 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1337 instructions use a PC relative branch, not absolute.
1339 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1341 * configure.in: Set libtool_enable_shared rather than
1342 libtool_shared. Remove diversion hack.
1343 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1345 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1347 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1348 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1350 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1352 * tic30-dis.c: New file.
1353 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1354 * configure.in: Handle bfd_tic30_arch.
1355 * Makefile.am: Rebuild dependencies.
1356 (CFILES): Add tic30-dis.c
1357 (ALL_MACHINES): Add tic30-dis.lo.
1358 * configure, Makefile.in: Rebuild.
1360 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1362 * m32r-opc.h (HAVE_CPU_M32R): Define.
1364 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1366 * v850-opc.c (insertion routines): If both alignment and size is
1367 wrong then report this.
1369 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1371 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1372 Only recognize instructions for the current target_processor.
1374 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1376 * d10v-dis.c (PC_MASK): Correct value.
1377 (print_operand): If there's a reloc, don't calculate the
1378 address because they could be in different sections.
1380 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1382 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1383 instruction after the 4650's "mul" instruction; nobody's using the
1384 4010 these days. If object files someday indicate which processor
1385 variant they're intended for, we can do a better job at this.
1387 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1389 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1390 table provided entry size. Use CGEN_INSN_MNEMONIC.
1391 (cgen_parse_keyword): Rewrite.
1392 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1393 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1394 * cgen-opc.c: Clean up pass over `struct foo' usage.
1395 (cgen_keyword_lookup_value): Handle "" entry.
1396 (cgen_keyword_add): Likewise.
1398 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1400 * mips-opc.c: Add FP_D to s.d instruction flags.
1402 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1404 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1406 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1408 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1409 PC relative offset forms before the 15 bit forms. An assembler command
1410 line option now chooses the default.
1412 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1414 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1415 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1417 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1419 * configure: Only build libopcodes shared if --enable-shared's value
1420 was `yes', or was set to `*opcodes*'.
1421 * aclocal.m4: Likewise.
1422 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1423 original source of this bit of code. It's not clear what the best fix
1426 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1428 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1429 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1430 offset forms before the 15 bit forms, to default to the long forms.
1432 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1434 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1436 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1438 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1439 symbol if none is present.
1440 (print_insn_big_arm): Prevent examination of stored symbol if
1443 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1445 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1447 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1449 * disassemble.c: Remove disasm_symaddr() function.
1451 * arm-dis.c: Use info->symbol instead of info->flags to determine
1452 if disassmbly should be in Thumb or Arm mode.
1454 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1456 * arm-dis.c: Add support for disassembling Thumb opcodes.
1457 (print_insn_thumb): New function.
1459 * disassemble.c (disasm_symaddr): New function.
1461 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1462 (thumb_opcodes): Table of Thumb opcodes.
1464 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1466 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1468 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1469 and 'v' as operand types.
1471 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1473 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1474 <olivier.carmona@di.epfl.ch>.
1475 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1476 which has a two word opcode with a one word argument.
1478 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1480 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1481 unsigned, not signed.
1482 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1484 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1486 * d10v-dis.c (print_operand):
1487 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1489 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1491 * d10v-opc.c (OPERAND_FLAG): Split into:
1492 (OPERAND_FFLAG, OPERAND_CFLAG) .
1496 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1498 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1499 field for all INSN_MACRO's.
1500 * mips16-opc.c: same
1502 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1504 * mips-opc.c (sync,cache): These are 3900 insns.
1506 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1508 sh-opc.h (sh_table): Remove ftst/nan.
1510 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1512 * mips-opc.c (ffc, ffs): Fix mask.
1514 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1516 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1519 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1521 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1522 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1524 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1526 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1527 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1529 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1531 * v850-dis.c (disassemble): Replace // with /* ... */
1533 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1535 * sparc-opc.c: Add wr & rd for v9a asr's.
1536 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1537 (v9a_asr_reg_names): New variable.
1538 Patch from David Miller <davem@vger.rutgers.edu>.
1540 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1542 * sparc-opc.c (v9notv9a): New insn type.
1543 (IMPDEP): Move to the end to not conflict with edge8 et al.
1544 Patch from David Miller <davem@vger.rutgers.edu>.
1546 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1548 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1550 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1552 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1554 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1556 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1557 of disassemble_info structure to determine if an overlay address
1558 has a matching symbol in low memory.
1560 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1561 new symbol_at_address_func field in disassemble_info structure.
1563 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1565 * v850-opc.c (extract_d22): Use signed arithmatic.
1567 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1569 * mips-opc.c: Three op mult is not an ISA insn.
1571 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1573 * mips-opc.c: Fix formatting.
1575 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1577 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1578 than assuming that char is signed. Explicitly sign extend 16 bit
1579 values, rather than assuming that short is 16 bits.
1580 (OP_sI, OP_J, OP_DIR): Likewise.
1582 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1584 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1587 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1589 * v850-opc.c: Fix typo in comment.
1591 * v850-dis.c (disassemble): Add test of processor type when
1592 determining opcodes.
1594 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1596 * configure.in: Use a diversion to set enable_shared before the
1597 arguments are parsed.
1598 * configure: Rebuild.
1600 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1602 * m68k-opc.c (TBL1): Use ! rather than `.
1603 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1605 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1607 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1609 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1611 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1614 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1615 * aclocal.m4: Rebuild with new libtool.
1616 * configure: Rebuild.
1618 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1620 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1622 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1624 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1626 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1628 * v850-opc.c (v850_opcodes): Further rearrangements.
1630 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1632 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1634 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1636 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1639 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1641 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1643 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1645 * v850-opc.c: Initialise processors field of v850_opcode structure.
1647 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1649 Merge changes from Martin Hunt:
1651 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1653 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1654 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1655 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1657 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1659 * d30v-dis.c (print_insn): First operand of d*i (delayed
1660 branch) instructions is relative.
1662 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1663 (d30v_operand_table): Add IMM6S3 type.
1664 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1666 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1667 and cmp instructions.
1669 * d30v-opc.c: Correct entries for repeat*, and sat*.
1670 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1671 types. Correct several formats.
1673 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1675 * d30v-opc.c (pre_defined_registers): Change control registers.
1677 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1678 SHORT_C2. Manual was incorrect.
1680 * d30v-dis.c (lookup_opcode): Return value now indicates
1681 if an opcode has a short and a long form. Used for deciding
1682 to append a ".s" or ".l".
1683 (print_insn): Append a ".s" to an instruction if it is
1684 the short form and ".l" if it is a long form. Do not append
1685 anything if the instruction has only one possible size.
1687 * d30v-opc.c: Change mulx2h to require an even register.
1688 New form: SHORT_A2; a SHORT_A form that needs an even
1689 register as the first operand.
1691 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1692 instruction was not being disassembled if there were an odd
1693 number of instructions.
1695 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1697 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1699 * v850-dis.c (disassemble): Improved display of register lists.
1701 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1703 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1704 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1705 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1706 fandnot1s, fandnot2s.
1708 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1710 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1712 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1714 * cgen-asm.c (cgen_parse_address): New argument resultp.
1715 All callers updated.
1716 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1718 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1720 * mn10200-dis.c (disassemble): PC relative instructions are
1721 relative to the next instruction, not the current instruction.
1723 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1725 * v850-dis.c (disassemble): Only signed extend values that are not
1726 returned by extract functions.
1727 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1729 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1731 * v850-opc.c: Update comments. Remove use of
1732 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1734 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1736 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1738 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1740 * configure: Rebuilt with latest devo autoconf for NT support.
1742 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1744 * v850-dis.c (disassemble): Use curly brace syntax for register
1747 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1748 where r0 is being used as a destination register.
1750 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1752 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1754 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1756 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1758 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1760 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1761 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1764 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1766 * configure (cgen_files): Add support for v850e target.
1767 * configure.in (cgen_files): Add support for v850e target.
1769 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1771 * configure (cgen_files): Add support for v850ea target.
1772 * configure.in (cgen_files): Add support for v850ea target.
1774 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1776 * configure.in (bfd_arc_arch): Add.
1777 * configure: Rebuild.
1778 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1779 * Makefile.in: Rebuild.
1780 * arc-dis.c, arc-opc.c: New files.
1781 * disassemble.c (ARCH_all): Define ARCH_arc.
1782 (disassembler): Add ARC support.
1784 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1786 * v850-dis.c (disassemble): Add support for v850EA instructions.
1788 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1789 (v850_opcodes): Add v850EA instructions.
1791 * v850-dis.c (disassemble): Add support for v850E instructions.
1793 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1794 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1795 insert_spe, extract_spe): New Functions.
1796 (v850_opcodes): Add v850E instructions.
1798 * v850-opc.c: Reorganised and re-layed out to improve readability
1801 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1803 * configure: Rebuild with autoconf 2.12.1.
1805 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1807 * aclocal.m4, configure: Rebuild with new automake patches.
1809 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1811 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1812 * acinclude.m4: Just include acinclude.m4 from BFD.
1813 * aclocal.m4, configure: Rebuild.
1815 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1817 * Makefile.am: New file, based on old Makefile.in.
1818 * acconfig.h: New file.
1819 * acinclude.m4: New file.
1820 * stamp-h.in: New file.
1821 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1822 Removed shared library handling; now handled by libtool. Replace
1823 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1824 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1825 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1826 handling in AC_OUTPUT.
1827 * dep-in.sed: Change .o to .lo.
1828 * Makefile.in: Now built with automake.
1829 * aclocal.m4: Now built with aclocal.
1830 * config.in, configure: Rebuild.
1832 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1834 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1836 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1838 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1840 * sparc-dis.c (sorted_opcodes): New static local.
1841 (struct opcode_hash): `opcode' is pointer to const element.
1842 (build_hash): First arg is now table of sorted pointers.
1843 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1844 (compare_opcodes): Update.
1846 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1848 * cgen-opc.c: #include <ctype.h>.
1849 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1850 Handle case insensitive hashing.
1851 (hash_keyword_value): Change type of `value' to unsigned int.
1853 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1855 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1856 precision FP, mark it as such. Likewise for double precision
1857 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1860 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1862 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1864 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1865 nesting depth when all the macros are expanded.
1867 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1869 * sparc-opc.c: The fcmp v9a instructions take an integer register
1870 as a destination, not a floating point register. From Christian
1871 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1873 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1875 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1876 syntax. From Roman Hodek
1877 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1879 * i386-dis.c (twobyte_has_modrm): Fix pand.
1881 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1883 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1885 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1887 * arm-dis.c: Add prototypes for arm_decode_shift and
1890 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1892 * mips-opc.c: Add r3900 insns.
1894 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1896 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1897 print delay slot instructions on the same line. When using a PC
1898 relative load, add a comment with the value being loaded if it can
1901 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1903 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1904 to pushS/popS for segment regs and byte constant so that
1905 pushw/popw printed when in 16 bit data mode.
1907 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1908 print cbtw, cwtd in 16 bit data mode.
1909 * i386-dis.c (putop): extra case W to support above.
1911 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1912 address size prefix in 16 bit address mode.
1914 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1916 * sh-dis.c: Reindent. Rename local variable fprintf to
1919 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1921 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1923 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1925 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1927 * mips16-opc.c (mip16_opcodes): same.
1929 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1931 * m68k-opc.c (moveb): Change $d to %d.
1933 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1935 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1936 (twobyte_has_modrm): Likewise.
1938 (OP_MMX, OP_EM, OP_MS): New static functions.
1940 * i386-dis.c: Revert patch of April 4. The output now matches
1943 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1945 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1948 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1950 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1952 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1954 * Makefile.in (install): Depend upon installdirs.
1955 (installdirs): New target.
1957 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1959 From Thomas Graichen <graichen@rzpd.de>:
1960 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1961 * configure: Rebuild.
1963 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1965 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1966 Delete string{,s}.h support.
1968 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1970 * cgen-asm.c (cgen_parse_operand_fn): New global.
1971 (cgen_parse_{{,un}signed_integer,address}): Update call to
1972 cgen_parse_operand_fn.
1973 (cgen_init_parse_operand): New function.
1974 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1975 from cgen_asm_init_parse.
1976 (m32r_cgen_assemble_insn): New operand `errmsg'.
1977 Delete call to as_bad, return error message to caller.
1978 (m32r_cgen_asm_hash_keywords): #if 0 out.
1980 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1982 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1984 [case 'J']: Fix typo in register name.
1986 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1988 * configure.in: Substitute SHLIB_LIBS.
1989 * configure: Rebuild.
1990 * Makefile.in (SHLIB_LIBS): New variable.
1991 ($(SHLIB)): Use $(SHLIB_LIBS).
1993 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1995 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1997 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1999 * disassemble.c (disassembler): Handle m32r.
2001 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2003 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2004 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2005 * Makefile.in (CFILES): Add them.
2006 (ALL_MACHINES): Add them.
2007 (dependencies): Regenerate.
2008 * configure.in (cgen_files): New variable.
2009 (bfd_m32r_arch): Add entry.
2010 * configure: Regenerate.
2012 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2015 * configure: Rebuild.
2017 * Makefile.in: Rebuild dependencies.
2019 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2021 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2024 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2026 * Branched binutils 2.8.
2028 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2030 * m10200-dis.c: Rename from mn10200-dis.c.
2031 * m10200-opc.c: Rename from mn10200-opc.c.
2032 * m10300-dis.c: Rename from mn10300-dis.c
2033 * m10300-opc.c: Rename from mn10300-opc.c.
2034 * Makefile.in: Update accordingly.
2036 * mips16-opc.c: Add mul and dmul macros.
2038 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2040 * makefile.vms: Update CFLAGS, add clean target.
2042 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * mips-opc.c: Add "wait". From Ralf Baechle
2045 <ralf@gnu.ai.mit.edu>.
2047 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2048 * configure, config.in: Rebuild.
2049 * sysdep.h: Include <stdlib.h> if it exists.
2050 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2052 * Makefile.in: Rebuild dependencies.
2054 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2056 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2057 Andrew Bray <andy@madhouse.demon.co.uk>.
2059 * mips-opc.c: Add cast when setting mips_opcodes.
2061 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2063 * v850-dis.c (disassemble): Fix sign extension problem.
2064 * v850-opc.c (extract_d*): Fix sign extension problems to make
2065 disassembly calculate branch offsets correctly.
2067 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2069 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2071 * mips-opc.c: Add dctr and dctw.
2073 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2075 * d30v-dis.c (print_insn): Change the way signed constants
2078 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2080 * Makefile.in (BFD_H): New variable.
2081 (HFILES): New variable.
2082 (CFILES): Add all C files.
2083 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2084 Delete old dependencies, and build new ones.
2085 * dep-in.sed: New file.
2087 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2089 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2091 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2093 * mn10200-opc.c: Change "trap" to "syscall".
2094 * mn10300-opc.c: Add new "syscall" instruction.
2096 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2098 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2099 mulul insns on the coldfire.
2101 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2103 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2104 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2105 (print_insn_little_arm): Likewise.
2107 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2109 Based on patches from H.J. Lu <hjl@lucon.org>:
2110 * i386-dis.c (fetch_data): Add prototype.
2111 * m68k-dis.c (fetch_data): Add prototype.
2112 (dummy_print_address): Add prototype. Make static.
2113 * ppc-opc.c (valid_bo): Add prototype.
2114 * sparc-dis.c (build_hash_table): Add prototype.
2115 (is_delayed_branch, compute_arch_mask): Add prototypes.
2116 (print_insn_sparc): Make several local variables const.
2117 (compare_opcodes): Change arguments to const PTR. Add prototype.
2118 * sparc-opc.c (arg): Change name field to be const.
2119 (lookup_name, lookup_value): Add prototypes. Change table and
2120 name parameters to be const.
2121 (sparc_encode_asi): Change name parameter to be const.
2122 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2123 (sparc_encode_sparclet_cpreg): Likewise.
2124 (sparc_decode_asi): Change return type to be const.
2125 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2126 (sparc_decode_sparclet_cpreg): Likewise.
2128 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2130 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2131 Solaris doesn't like the combined options, and the -f is
2133 (stamp-tshlink, install): Likewise.
2135 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2137 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2140 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2142 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2144 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2146 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2149 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2151 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2153 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2155 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2157 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2159 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2161 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2163 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2164 floatformat_to_double to make portable.
2165 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2168 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2170 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2171 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2173 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2175 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2176 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2178 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2180 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2181 (OFF_SL_BR_SCALED): ... to this, and added the flag
2182 TIC80_OPERAND_BASEREL to the flags word.
2183 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2186 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2188 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2189 Change mips_opcodes from const array to a pointer,
2190 and change bfd_mips_num_opcodes from const int to int,
2191 so that we can increase the size of the mips opcodes table
2194 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2196 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2197 store BITNUM values in the table in one's complement form
2198 to match behavior when assembler is given a raw numeric
2199 value for a BITNUM operand.
2200 * tic80-dis.c (print_operand_bitnum): Ditto.
2202 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2204 * d30v-opc.c: Removed references to FLAG_X.
2206 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2208 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2210 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2212 * Makefile.in: Added d30v object files.
2213 * configure: (bfd_d30v_arch) Rebuilt.
2214 * configure.in: (bfd_d30v_arch) Added new case.
2215 * d30v-dis.c: New file.
2216 * d30v-opc.c: New file.
2217 * disassemble.c (disassembler) Add entry for d30v.
2219 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2221 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2222 representations for the floating point BITNUM values.
2224 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2226 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2227 in the table in one's complement form, as they appear in the
2229 (tic80_symbol_to_value): Use macros to access predefined
2231 (tic80_value_to_symbol): Ditto.
2232 (tic80_next_predefined_symbol): New function.
2233 * tic80-dis.c (print_operand_bitnum): Remove code that did
2234 one's complement for BITNUM values.
2236 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2238 * makefile.vms: Remove 8 bit characters. Update to latest
2241 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2243 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2245 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2247 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2248 (IMM24_PCREL): Likewise.
2250 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2252 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2253 address for an extended PC relative instruction that is not a
2256 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2258 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2261 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2263 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2264 (tic80_opcodes): Sort entries so that long immediate forms
2265 come after short immediate forms, making it easier for
2266 assembler to select the right one for a given operand.
2268 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2270 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2272 (print_insn_mips16): Likewise.
2274 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2276 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2277 a symbol class that restricts translation to just that
2278 class (general register, condition code, etc).
2280 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2282 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2283 and REG_DEST_E for register operands that have to be
2284 an even numbered register. Add REG_FPA for operands that
2285 are one of the floating point accumulator registers.
2286 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2287 (tic80_opcodes): Change entries that need even numbered
2288 register operands to use the new operand table entries.
2289 Add "or" entries that are identical to "or.tt" entries.
2291 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2293 * mips16-opc.c: Add new cases of exit instruction for
2295 * mips-dis.c (print_mips16_insn_arg): Display floating point
2296 registers in operands of exit instruction. Print `$' before
2297 register names in operands of entry and exit instructions.
2299 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2301 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2302 pairs for all predefined symbols recognized by the assembler.
2303 Also used by the disassembling routines.
2304 (tic80_symbol_to_value): New function.
2305 (tic80_value_to_symbol): New function.
2306 * tic80-dis.c (print_operand_control_register,
2307 print_operand_condition_code, print_operand_bitnum):
2308 Remove private tables and use tic80_value_to_symbol function.
2310 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2312 * d10v-dis.c (print_operand): Change address printing
2313 to correctly handle PC wrapping. Fixes PR11490.
2315 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2317 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2320 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2322 * mips-dis.c (print_insn_mips16): Set insn_info information.
2323 (print_mips16_insn_arg): Likewise.
2325 * mips-dis.c (print_insn_mips16): Better handling of an extend
2326 opcode followed by an instruction which can not be extended.
2328 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2330 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2331 coldfire moveb instruction to not allow an address register as
2332 destination. Although the documentation does not indicate that
2333 this is invalid, experiments uncovered unexpected behavior.
2334 Added a comment explaining the situation. Thanks to Andreas
2335 Schwab for pointing this out to me.
2337 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2339 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2340 entries are presorted so that entries with the same mnemonic are
2341 adjacent to each other in the table. Sort the entries for each
2342 instruction so that this is true.
2344 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2346 * m68k-dis.c: Include <libiberty.h>.
2347 (print_insn_m68k): Sort the opcode table on the most significant
2348 nibble of the opcode.
2350 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2352 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2353 "vsub", "vst", "xnor", and "xor" instructions.
2354 (V_a1): Renamed from V_a, msb of accumulator reg number.
2355 (V_a0): Add macro, lsb of accumulator reg number.
2357 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2359 * tic80-dis.c (print_insn_tic80): Broke excessively long
2360 function up into several smaller ones and arranged for
2361 the instruction printing function to be callable recursively
2362 to print vector instructions that have both a load and a
2363 math instruction packed into a single opcode.
2364 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2365 to explain why it comes after the other vector opcodes.
2367 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2369 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2370 move insns to handle immediate operands.
2372 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2374 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2375 fix operand mask in the "moveml" entries for the coldfire.
2377 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2380 New macros for building vector instruction opcodes.
2381 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2382 FMT_LI, which were unused. The field is now a flags field.
2383 Remove some opcodes that are possible, but illegal, such
2384 as long immediate instructions with doubles for immediate
2385 values. Add "vadd" and "vld" instructions.
2387 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2389 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2390 the order more logical. Move the shift alias instructions ("rotl",
2391 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2392 interspersed with the regular sr.x and sl.x instructions. Add
2393 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2394 "sub", "subu", "swcr", and "trap".
2396 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2398 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2399 (OFF_SL_PC): Renamed from OFF_SL.
2400 (OFF_SS_BR): New operand type for base relative operand.
2401 (OFF_SL_BR): New operand type for base relative operand.
2402 (REG_BASE): New operand type for base register operand.
2403 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2404 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2405 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2407 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2408 10 char field, padded with spaces on rhs, rather than a string
2409 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2410 than old TIC80_OPERAND_RELATIVE. Add support for new
2411 TIC80_OPERAND_BASEREL flag bit.
2413 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2415 * tic80-dis.c (print_insn_tic80): Print floating point operands
2417 * tic80-opc.c (SPFI): Add single precision floating point
2418 immediate operand type.
2419 (ROTATE): Add rotate operand type for shifts.
2420 (ENDMASK): Add for shifts.
2421 (n): Macro for the 'n' bit.
2422 (i): Macro for the 'i' bit.
2423 (PD): Macro for the 'PD' field.
2424 (P2): Macro for the 'P2' field.
2425 (P1): Macro for the 'P1' field.
2426 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2429 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2431 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2432 adding in current address for pc-relative operands.
2434 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2436 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2437 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2438 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2439 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2440 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2441 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2442 (REG_SCALED, LSI_SCALED): New operand types.
2443 (E): New macro for 'E' bit at bit 27.
2444 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2445 opcodes, including the various size flavors (b,h,w,d) for
2446 the direct load and store instructions.
2448 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2450 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2452 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2453 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2454 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2455 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2456 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2457 masks with "MASK_* & ~M_*" to get the M bit reset.
2458 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2460 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2462 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2463 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2464 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2466 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2467 CC, SICR, and LICR table entries.
2468 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2469 "bcnd", and "brcr" opcodes.
2471 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2473 * ppc-opc.c (powerpc_operands): Make comment match the
2474 actual fields (no shift field).
2475 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2476 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2477 partial implementation, work in progress.
2478 * tic80-opc.c (tic80_operands): Begin construction operands table.
2479 (tic80_opcodes): Continue populating opcodes table and start
2480 filling in the operand indices.
2481 (tic80_num_opcodes): Add this.
2483 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2485 * m68k-opc.c: Add #B case for moveq.
2487 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2489 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2490 before they are used.
2492 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2494 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2495 for "breakpoint" instruction.
2497 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2499 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2500 (dep): Use ALL_CFLAGS rather than CFLAGS.
2502 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2504 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2507 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2509 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2510 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2512 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2514 * mips16-opc.c: Add "abs".
2516 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2518 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2519 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2520 (disassembler): Add bfd_arch_tic80 support to set disassemble
2521 to print_insn_tic80.
2522 * tic80-dis.c (print_insn_tic80): Add stub.
2524 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2526 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2527 * configure: Regenerate with autoconf.
2528 * tic80-dis.c: Add file.
2529 * tic80-opc.c: Add file.
2531 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2533 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2535 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2537 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2538 (mn10200_opcodes): Use it for some logicals and btst insns.
2539 Add "break" and "trap" instructions.
2541 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2543 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2545 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2547 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2548 relative load or add now depends upon whether the instruction is
2551 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2553 * mn10200-dis.c: Finish writing disassembler.
2554 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2555 Fix mask for "jmp (an)".
2557 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2558 handle endianness issues for mn10300.
2560 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2562 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2564 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2565 instruction. Fix opcode field for "movb (imm24),dn".
2567 * mn10200-opc.c (mn10200_operands): Fix insertion position
2570 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2572 * mn10200-opc.c: Create mn10200 opcode table.
2573 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2574 but moving along nicely.
2576 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2578 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2580 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2582 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2583 specifiers for fmovem* instructions.
2585 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2587 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2589 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2591 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2594 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2596 * mn10300-opc.c: Add some comments explaining the various
2599 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2601 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2603 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2606 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2607 operand specifiers in fmovm* instructions.
2609 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2611 * ppc-opc.c (insert_li): Give an error if the offset has the two
2612 least significant bits set.
2614 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2616 * mips-dis.c (print_insn_mips16): Separate the instruction from
2617 the arguments with a tab, not a space.
2619 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2621 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2624 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2627 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2629 * configure: Rebuild with autoconf 2.12.
2631 Add support for mips16 (16 bit MIPS implementation):
2632 * mips16-opc.c: New file.
2633 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2634 (mips16_reg_names): New static array.
2635 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2636 after seeing a 16 bit symbol.
2637 (print_insn_little_mips): Likewise.
2638 (print_insn_mips16): New static function.
2639 (print_mips16_insn_arg): New static function.
2640 * mips-opc.c: Add jalx instruction.
2641 * Makefile.in (mips16-opc.o): New target.
2642 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2643 * configure: Rebuild.
2645 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2647 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2648 operand specifiers in *save, *restore and movem* instructions.
2650 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2653 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2654 register operands for immediate arithmetic, not, neg, negx, and
2655 set according to condition instructions.
2657 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2658 specifier of the effective-address operand in immediate forms of
2659 arithmetic instructions. The specifier for the immediate operand
2660 notes how and where the constant will be stored.
2662 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2664 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2667 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2670 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2672 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2674 * mn10300-dis.c (disassemble): Handle register lists.
2676 * mn10300-opc.c: Fix handling of register list operand for
2677 "call", "ret", and "rets" instructions.
2679 * mn10300-dis.c (disassemble): Print PC-relative and memory
2680 addresses symbolically if possible.
2681 * mn10300-opc.c: Distinguish between absolute memory addresses,
2682 pc-relative offsets & random immediates.
2684 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2686 (disassemble): Handle SPLIT and EXTENDED operands.
2688 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2690 * mn10300-dis.c: Rough cut at printing some operands.
2692 * mn10300-dis.c: Start working on disassembler support.
2693 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2695 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2697 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2699 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2701 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2703 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2705 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2706 register argument is calls and jmp instructions.
2708 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2710 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2711 getx operand. Fix opcode for mulqu imm,dn.
2713 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2715 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2716 in MN10300_OPERAND_SPLIT operands for how many bits
2717 appear in the basic insn word. Add IMM32_HIGH24,
2718 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2719 (mn10300_opcodes): Use new operands as needed.
2721 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2722 for bset, bclr, btst instructions.
2723 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2725 * mn10300-opc.c (mn10300_operands): Remove many redundant
2726 operands. Update opcode table as appropriate.
2727 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2728 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2730 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2732 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2733 operands (for indexed load/stores). Fix bitpos for DI
2734 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2735 few instructions that insert immediates/displacements in the
2736 middle of the instruction. Add IMM8E for 8 bit immediate in
2737 the extended part of an instruction.
2738 (mn10300_operands): Use new opcodes as appropriate.
2740 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2742 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2743 sequential so the assembler never parallelizes it with
2746 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2748 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2749 a data/address register that appears in register field 0
2750 and register field 1.
2751 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2753 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2755 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2756 standard disassembly.
2758 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2759 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2760 Recategorize PALcode instructions.
2762 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2764 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2766 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2768 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2769 there are no operand types.
2771 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2773 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2775 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2777 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2779 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2781 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2783 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2784 and sst.w instructions.
2786 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2789 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2791 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2794 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2796 * ppc-opc.c (PPCPWR2): Define.
2797 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2800 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2802 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2803 field for movhu instruction.
2805 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2806 cast value to "long" not "signed long" to keep hpux10
2809 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2811 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2814 * mn10300-opc.c (FMT*): Remove definitions.
2816 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2817 for shift-by-register opcodes.
2819 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2820 into [AD][MN][01] for encoding the position of the register
2823 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2825 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2826 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2828 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2830 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2831 Fix various typos. Add "PAREN" operand.
2832 (MEM, MEM2): Define.
2833 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2834 operands. Fix several typos.
2836 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2839 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2841 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2842 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2844 (mn10300_opcodes): Break opcode format out into its own field.
2845 Update many operand fields to deal with signed vs unsigned
2846 issues. Fix one or two typos in the "mov" instruction
2847 opcode, mask and/or operand fields.
2849 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2851 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2852 m68851 wasn't reset.
2854 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2857 all opcodes. Very rough cut at operands for all opcodes.
2859 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2862 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2864 * mn10200-opc.c, mn10300-opc.c: New files.
2865 * mn10200-dis.c, mn10300-dis.c: New files.
2866 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2867 * disassemble.c: Break mn10x00 support into 10200 and 10300
2869 * configure.in: Likewise.
2870 * configure: Rebuilt.
2872 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2874 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2876 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2878 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2880 * disassemble (ARCH_mn10x00): Define.
2881 (disassembler): Handle bfd_arch_mn10x00.
2882 * configure.in: Recognize bfd_mn10x00_arch.
2883 * configure: Rebuilt.
2885 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2887 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2888 accordingly. Don't declare functions using op_rtn.
2890 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2892 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2893 params to be more standard.
2894 * (disassemble): Print absolute addresses and symbolic names for
2895 branch and jump targets.
2896 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2898 * (v850_opcodes): Add breakpoint insn.
2900 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2902 * m68k-opc.c: Move the fmovemx data register cases before the
2903 other cases, so that they get recognized before the data register
2904 does gets treated as a degenerate register list.
2906 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2908 * mips-opc.c: Add a case for "div" and "divu" with two registers
2909 and a destination of $0.
2911 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2913 * mips-dis.c (print_insn_arg): Add prototype.
2914 (_print_insn_mips): Ditto.
2916 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2918 * mips-dis.c (print_insn_arg): Print condition code registers as
2921 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2923 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2925 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2927 * v850-dis.c (disassemble): Make static. Provide prototype.
2929 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2931 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2934 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2936 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2937 ']' characters into the output stream.
2938 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2939 Add "memop" field to all opcodes (for the disassembler).
2940 Reorder opcodes so that "nop" comes before "mov" and "jr"
2941 comes before "jarl".
2943 * v850-dis.c (print_insn_v850): Fix typo in last change.
2945 * v850-dis.c (print_insn_v850): Properly handle disassembling
2946 a two byte insn at the end of a memory region when the memory
2947 region's size is only two byte aligned.
2949 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2951 * v850-dis.c (v850_reg_names): Define.
2952 (v850_sreg_names, v850_cc_names): Likewise.
2953 (disassemble): Very rough cut at printing operands (unformatted).
2955 * v850-opc.c (BOP_MASK): Fix.
2956 (v850_opcodes): Fix mask for jarl and jr.
2958 * v850-dis.c: New file. Skeleton for disassembler support.
2959 * Makefile.in Remove v850 references, they're not needed here.
2960 * configure.in: Add v850-dis.o when building v850 toolchains.
2961 * configure: Rebuilt.
2962 * disassemble.c (disassembler): Call v850 disassembler.
2964 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2965 (insert_d8_6, extract_d8_6): New functions.
2966 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2967 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2969 (IF4A, IF4B): Use "D7" instead of "D7S".
2970 (IF4C, IF4D): Use "D8_7" instead of "D8".
2971 (IF4E, IF4F): New. Use "D8_6".
2972 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2973 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2975 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2976 (v850_operands): Change D16 to D16_15, use special insert/extract
2977 routines. New new D16 that uses the generic insert/extract code.
2978 (IF7A, IF7B): Use D16_15.
2979 (IF7C, IF7D): New. Use D16.
2980 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2982 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2983 message. Issue an error if the branch offset is odd.
2985 * v850-opc.c: Add notes about needing special insert/extract
2986 for all the load/store insns, except "ld.b" and "st.b".
2988 * v850-opc.c (insert_d22, extract_d22): New functions.
2989 (v850_operands): Use insert_d22 and extract_d22 for
2991 (insert_d9): Fix range check.
2993 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2995 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2996 and set bits field to D9 and D22 operands.
2998 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3000 * v850-opc.c (v850_operands): Define SR2 operand.
3001 (v850_opcodes): "ldsr" uses R1,SR2.
3003 * v850-opc.c (v850_opcodes): Fix opcode specs for
3004 sld.w, sst.b, sst.h, sst.w, and nop.
3006 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3008 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3009 end of the opcode table.
3011 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3013 * d10v-opc.c (pre_defined_registers): Added register pairs,
3014 "r0-r1", "r2-r3", etc.
3016 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3018 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3019 Create I16U for an unsigned 16bit mmediate operand.
3020 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3022 * v850-opc.c (v850_operands): Define EP operand.
3023 (IF4A, IF4B, IF4C, IF4D): Use EP.
3025 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3026 with immediate operand, "movhi". Tweak "ldsr".
3028 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3029 correct. Get sld.[bhw] and sst.[bhw] closer.
3031 * v850-opc.c (v850_operands): "not" is a two byte insn
3033 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3035 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3037 * v850-opc.c (two): Get order of words correct.
3039 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3041 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3042 register source and destination operands.
3043 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3045 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3046 same thinko in "trap" opcode.
3048 * v850-opc.c (v850_opcodes): Add initializer for size field
3051 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3052 Add D8 for 8-bit unsigned field in short load/store insns.
3053 (IF4A, IF4D): These both need two registers.
3054 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3055 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3056 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3057 for "ldsr" and "stsr".
3058 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3061 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3062 short store word (sst.w).
3064 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3066 * v850-opc.c (v850_operands): Added insert and extract fields,
3067 pointers to functions that handle unusual operand encodings.
3069 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3071 * v850-opc.c (v850_opcodes): Enable "trap".
3073 * v850-opc.c (v850_opcodes): Fix order of displacement
3074 and register for "set1", "clr1", "not1", and "tst1".
3076 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3078 * v850-opc.c (v850_operands): Add "B3" support.
3079 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3082 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3084 * v850-opc.c: Close unterminated comment.
3086 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3088 * v850-opc.c (v850_operands): Add flags field.
3089 (v850_opcodes): add move opcodes.
3091 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3093 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3094 * configure: (bfd_v850v_arch) Add new case.
3095 * configure.in: (bfd_v850_arch) Add new case.
3096 * v850-opc.c: New file.
3098 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3100 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3102 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3104 * d10v-opc.c: Add additional information to the opcode
3105 table to help determinine which instructions can be done
3108 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3110 * mpw-make.sed: Update editing of include pathnames to be
3113 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3115 * arm-opc.h: Added "bx" instruction definition.
3117 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3119 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3121 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3123 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3125 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3127 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3129 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3131 * makefile.vms: Update for alpha-opc changes.
3133 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3135 * i386-dis.c (print_insn_i386): Actually return the correct value.
3136 (ONE, OP_ONE): #ifdef out; not used.
3138 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3140 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3141 Changed subi operand type to treat 0 as 16.
3143 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3145 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3148 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3150 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3151 memory transfer instructions. Add new format string entries %h and %s.
3152 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3155 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3157 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3158 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3160 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3162 * alpha-dis.c (print_insn_alpha_osf): Remove.
3163 (print_insn_alpha_vms): Remove.
3164 (print_insn_alpha): Make globally visible. Chose the register
3165 names based on info->flavour.
3166 * disassemble.c: Always return print_insn_alpha for the alpha.
3168 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3170 * d10v-dis.c (dis_long): Handle unknown opcodes.
3172 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3174 * d10v-opc.c: Changes to support signed and unsigned numbers.
3175 All instructions with the same name that have long and short forms
3176 now end in ".l" or ".s". Divs added.
3177 * d10v-dis.c: Changes to support signed and unsigned numbers.
3179 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3181 * d10v-dis.c: Change all functions to use info->print_address_func.
3183 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3185 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3186 move ccr/sr insns more strict so that the disassembler only
3187 selects them when the addressing mode is data register.
3189 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3190 * d10v-opc.c (pre_defined_registers): Declare.
3191 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3192 to pick a better name for the registers.
3194 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3196 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3197 operands for fexpand and fpmerge. From Christian Kuehnke
3198 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3200 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3202 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3203 print routine. Take new regnames and cpumask arguments.
3204 Kill the environment variable nonsense.
3205 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3206 (print_insn_alpha_vms): New function. Do VMS style regnames.
3207 * disassemble.c (disassembler): Test bfd flavour to pick
3208 between OSF and VMS routines. Default to OSF.
3210 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3213 * configure: Rebuild.
3214 * Makefile.in (install): Use @INSTALL_SHLIB@.
3216 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3218 * configure: (bfd_d10v_arch) Add new case.
3219 * configure.in: (bfd_d10v_arch) Add new case.
3220 * d10v-dis.c: New file.
3221 * d10v-opc.c: New file.
3222 * disassemble.c (disassembler) Add entry for d10v.
3224 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3226 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3227 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3229 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3231 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3232 distinguish between variants of the instruction set.
3233 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3234 distinguish between variants of the instruction set.
3236 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3238 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3239 the 8086 instruction set.
3240 * i386-dis.c: General cleanups. Make most things static. Add
3241 prototypes. Get rid of static variables aflags and dflags. Pass
3242 them as args (to almost everything).
3244 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3246 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3248 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3250 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3251 if the next arg is marked with SRC_IN_DST. Gross.
3253 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3254 we're looking for and find EXR.
3256 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3257 if we're looking for KBIT and we don't find it.
3259 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3262 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3263 3bit immediate operands.
3265 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3267 * Released binutils 2.7.
3269 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3270 <kkaempf@progis.ac-net.de>.
3272 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3274 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3276 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3278 * sparc-dis.c (print_insn_sparclite): New routine to print
3279 sparclite instructions.
3281 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3283 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3285 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3287 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3288 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3289 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3291 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3293 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3294 Use autoconf-set values.
3295 (docdir, oldincludedir): Removed.
3296 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3298 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3300 * alpha-opc.c: New file.
3301 * alpha-opc.h: Remove.
3302 * alpha-dis.c: Complete rewrite to use new opcode table.
3303 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3304 * configure: Rebuild with autoconf 2.10.
3305 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3306 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3308 (alpha-opc.o): New target.
3310 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3313 Set imm_added_to_rs1 even if the source and destination register
3316 * sparc-opc.c: Add some two operand forms of the wr instruction.
3318 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3320 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3323 * disassemble.c (disassembler): Handle H8/S.
3324 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3326 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3328 * sparc-opc.c: Add beq/teq as aliases for be/te.
3330 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3331 <sergei@msil.sps.mot.com>.
3333 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3335 * makefile.vms: New file.
3337 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3339 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3341 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3344 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3346 * i386-dis.c (OP_OFF): Call append_prefix.
3348 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3350 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3351 unsigned long to silence a warning from the Solaris PowerPC
3354 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3356 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3358 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3360 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3362 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3363 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3364 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3365 cpush, cpusha, cpull sparclet insns.
3367 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3369 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3371 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3373 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3374 Set F_FLOAT on other floating point instructions.
3376 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3378 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3380 (powerpc_opcodes): Add 860/821 specific SPRs.
3382 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3384 * configure.in: Permit --enable-shared to specify a list of
3385 directories. Set and substitute BFD_PICLIST.
3386 * configure: Rebuild.
3387 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3388 uses. Set to @BFD_PICLIST@.
3390 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3392 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3393 not "abs", which may be needed for the absolute in something
3394 like btst #0,@10:8. Print L_3 immediates separately from other
3395 immediates. Change ABSMOV reference to ABS8MEM.
3397 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3399 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3400 (current_arch_mask): New static global.
3401 (compute_arch_mask): New static function.
3402 (print_insn_sparc): Delete sparc_v9_p. New static local
3403 current_mach. Resort opcode table if current_mach changes.
3404 Generalize "insn not supported" test.
3405 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3406 Delete test for v9/!v9.
3407 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3409 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3410 (brfcx): Renamed to FBRX.
3411 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3412 coprocessor mnemonics are not supported on the sparclet).
3413 (condf): Renamed to CONDF.
3414 (SLCBCC2): Delete F_ALIAS flag.
3416 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3418 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3419 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3421 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3423 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3424 that the shared library version number is set correctly.
3426 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3428 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3429 Miles Bader <miles@gnu.ai.mit.edu>.
3430 * configure: Rebuild.
3432 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3434 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3437 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3439 * configure: Rebuild with autoconf 2.8.
3441 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3443 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3444 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3446 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3448 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3449 since they appear as targets in Makefile.in.
3450 * configure: Rebuild.
3452 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3454 * mpw-make.sed: Edit out shared library support bits.
3456 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3458 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3459 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3460 (sparc_opcodes): Add sparclet insns.
3461 (sparclet_cpreg_table): New static local.
3462 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3463 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3465 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3467 * i386-dis.c (index16): New static variable.
3468 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3470 (OP_indirE): Return result of OP_E.
3471 (OP_E): Check for 16 bit addressing mode, and disassemble
3472 correctly. Optimised 32 bit case a little. Don't print
3473 "(base,index,scale)" when sib specifies only an offset.
3475 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3477 * configure.in: Set and substitute SHLIB_DEP.
3478 * configure: Rebuild.
3479 * Makefile.in (SHLIB_DEP): New variable.
3480 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3481 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3482 COMMON_SHLIB, add them to piclist with appropriate modifications.
3483 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3484 here: just use piclist.
3486 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3488 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3489 (print_insn_sparc): Rewrite v9/not-v9 tests.
3490 (compare_opcodes): Likewise.
3491 * sparc-opc.c (MASK_<ARCH>): Define.
3492 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3493 (sparclet,v6notv9): Define.
3494 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3495 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3497 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3499 * configure.in: Call AC_PROG_CC before configure.host.
3500 * configure: Rebuild.
3502 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3504 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3506 * i386-dis.c (onebyte_has_modrm): New static array.
3507 (twobyte_has_modrm): New static array.
3508 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3510 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3512 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3515 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3517 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3520 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3522 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3523 m68010up, not just m68020up | cpu32.
3525 * Makefile.in (SONAME): New variable.
3526 ($(SHLINK)): Make a link to the transformed name, as well.
3527 (stamp-tshlink): New target.
3528 (install): Skip stamp-tshlink during install.
3530 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3532 * configure.in: Call AC_ARG_PROGRAM.
3533 * configure: Rebuild.
3534 * Makefile.in (program_transform_name): New variable.
3535 (install): Transform library name before installing it.
3537 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3539 * i960-dis.c (mem): Add HX dcinva instruction.
3541 Support for building as a shared library, based on patches from
3542 Alan Modra <alan@spri.levels.unisa.edu.au>:
3543 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3544 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3545 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3546 * configure: Rebuild.
3547 * Makefile.in (ALLLIBS): New variable.
3548 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3549 (COMMON_SHLIB, SHLINK): New variables.
3550 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3551 (STAGESTUFF): Remove variable.
3552 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3553 (stamp-piclist, piclist): New targets.
3554 ($(SHLIB), $(SHLINK)): New targets.
3555 ($(OFILES)): Depend upon stamp-picdir.
3556 (disassemble.o): Build twice if PICFLAG is set.
3557 (MOSTLYCLEAN): Add pic/*.o.
3558 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3559 (distclean): Remove pic and stamp-picdir.
3560 (install): Install shared libraries.
3561 (stamp-picdir): New target.
3563 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3565 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3566 Print unknown instruction as "unknown", rather than in hex.
3568 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3570 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3572 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3574 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3576 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3579 when necessary. From Ulrich Drepper
3580 <drepper@myware.rz.uni-karlsruhe.de>.
3582 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3584 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3585 sparc_num_opcodes. Update architecture enum values.
3586 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3587 (sparc_opcode_lookup_arch): New function.
3588 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3589 (sparc_opcodes): Add v9a shutdown insn.
3591 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3593 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3594 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3596 (print_insn_sparc64): Deleted.
3597 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3600 * sparc-opc.c (architecture_pname): Add v9a.
3602 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3604 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3605 incorrectly defined as 0x16 when it should be 0x15.
3606 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3607 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3608 excb (exception barrier) which is defined in the Alpha
3609 Architecture Handbook version 2.
3610 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3611 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3612 disassembled as or, for example.
3614 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3616 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3617 (_print_insn_mips): Change i from int to unsigned int.
3619 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3621 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3622 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3624 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3626 * i386-dis.c: Added Pentium Pro instructions.
3628 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3630 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3633 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3635 * sh-opc.h (sh_nibble_type): Added REG_B.
3636 (sh_arg_type): Added A_REG_B.
3637 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3639 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3641 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3643 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3645 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3647 * Makefile.in (distclean): Remove stamp-h. From Ronald
3648 F. Guilmette <rfg@monkeys.com>.
3650 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3652 From David Mosberger-Tang <davidm@azstarnet.com>:
3653 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3656 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3658 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3659 (sh_table): Added many SH3 opcodes.
3660 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3662 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3664 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3665 (subco,subco.): Mark this PPC, not PPCCOM.
3667 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3669 * configure: Rebuild with autoconf 2.7.
3671 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3673 * configure: Rebuild with autoconf 2.6.
3675 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3677 * configure.in: Sort list of architectures. Accept but do nothing
3678 for alliant, convex, pyramid, romp, and tahoe.
3680 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3682 * a29k-dis.c (print_special): Change num to unsigned int.
3684 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3686 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3689 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3691 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3692 * configure: Rebuilt.
3694 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3696 * configure.in: Add case for bfd_i860_arch.
3697 * configure: Rebuild.
3699 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3701 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3702 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3703 (NEXTDOUBLE): Likewise.
3704 (print_insn_m68k): Don't match fmoveml if there is more than one
3705 register in the list.
3706 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3708 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3710 * m68k-opc.c: Use #W rather than #w.
3711 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3713 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3715 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3716 and likewise for all the dbxx opcodes.
3718 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3720 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3722 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3724 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3725 the VR4100 specific instructions to the mips_opcodes structure.
3727 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3729 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3730 ugly Metrowerks bug in CW6, is fixed in CW7.
3732 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3734 * ppc-opc.c (whole file): Add flags for common/any support.
3736 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3738 * Makefile.in (BISON): Remove macro.
3739 (FLAGS_TO_PASS): Remove BISON.
3741 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3743 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3745 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3746 instructions that take no args by looking at the match mask.
3747 (print_insn_arg): Always print "%" before register names.
3748 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3749 [case '_']: Don't print "@#" before address.
3750 [case 'J']: Use "%s" as format string, not register name.
3751 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3753 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3755 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3758 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3760 From David Mosberger-Tang <davidm@azstarnet.com>
3762 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3763 (alpha_insn_set): added definitions for VAX floating point
3764 instructions (Unix compilers don't generate these, but handcoded
3765 assembly might still use them).
3767 * alpha-dis.c (print_insn_alpha): added support for disassembling
3768 the miscellaneous instructions in the Alpha instruction set.
3770 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3772 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3773 no longer create sysdep.h, sed ppc-opc.c to work around a
3774 serious Metrowerks C bug.
3775 * mpw-make.in: Remove.
3776 * mpw-make.sed: New file, used by mpw-configure to edit
3777 Makefile.in into an MPW makefile.
3779 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3781 * Makefile.in (maintainer-clean): New synonym for realclean.
3783 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3785 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3786 which use '0', '1', and '2' instead. Specify the proper size for
3787 a pmove immediate operand. Correct the pmovefd patterns to be
3788 moves to a register, not from a register.
3789 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3791 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3793 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3794 %psr, %wim, %tbr as F_NOTV9.
3796 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * Makefile.in (Makefile): Just rebuild Makefile when running
3800 (config.h, stamp-h): New targets.
3801 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3802 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3803 rebuilding config.h.
3804 * configure: Rebuild.
3806 * mips-opc.c: Change unaligned loads and stores with "t,A"
3807 operands to use "t,A(b)".
3809 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3811 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3813 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3815 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3816 until 3 instead of until 2.
3818 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3820 * Makefile.in (ALL_CFLAGS): Define.
3821 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3822 (MOSTLYCLEAN): Add config.log.
3823 (distclean): Don't remove config.log.
3824 * configure.in: Substitute HDEFINES.
3825 * configure: Rebuild.
3827 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3829 * sh-opc.h (sh_arg_type): Add F_FR0.
3830 (sh_table, case fmac): Add F_FR0 as first argument.
3832 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3834 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3836 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3838 * sparc-dis.c: Remove all references to NO_V9.
3840 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3842 * aclocal.m4: Just include ../bfd/aclocal.m4.
3843 * configure: Rebuild.
3845 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3847 * sparc-dis.c (X_DISP19): Define.
3848 (print_insn, case 'G'): Use it.
3849 (print_insn, case 'L'): Sign extend displacement.
3851 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3853 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3854 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3855 host_makefile_frag or frags.
3856 * aclocal.m4: New file.
3857 * configure: Rebuild.
3858 * Makefile.in (INSTALL): Set to @INSTALL@.
3859 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3860 (INSTALL_DATA): Set to @INSTALL_DATA@.
3862 (AR_FLAGS): Set to rc rather than qc.
3863 (CC): Define as @CC@.
3864 (CFLAGS): Set to @CFLAGS@.
3865 (@host_makefile_frag@): Remove.
3866 (config.status): Remove dependency upon @frags@.
3868 * configure.in: ../bfd/config.bfd now just sets shell variables.
3869 Use them rather than looking through target Makefile fragments.
3870 * configure: Rebuild.
3872 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3874 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3876 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3878 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3879 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3882 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3883 (lookup_{name,value}): New functions.
3884 (prefetch_table): New static local.
3885 (sparc_{encode,decode}_prefetch): New functions.
3886 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3888 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3890 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3893 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3895 * sh-dis.c: Correct comment on first line of file.
3897 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3899 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3901 * sparc-opc.c (asi, membar): New static locals.
3902 (sparc_{encode,decode}_{asi,membar}): New functions.
3903 (sparc_opcodes, membar insn): Fix.
3904 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3905 Support decoding of membar masks.
3908 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3910 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3912 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3914 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3915 and likewise for the other branches. Add bhs as an alias for bcc,
3916 and likewise for the size variants. Add dbhs as an alias for
3919 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3921 * sh-opc.h (FP sts instructions): Update to match reality.
3923 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3925 * m68k-dis.c: (fpcr_names): Add % before all register names.
3926 (reg_names): Likewise.
3927 (print_insn_arg): Don't explicitly print % before register names.
3928 Add % before register names in static array names. In case 'r',
3929 print data registers as `@(Dn)', not `Dn@'. When printing a
3930 memory address, don't print @# before it.
3931 (print_indexed): Change base_disp and outer_disp from int to
3932 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3933 syntax. Sign extend 8 byte displacement correctly.
3934 (print_base): Print using MIT syntax. Print zpc when appropriate.
3935 Change parameter disp from int to bfd_vma.
3937 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3940 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3942 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3943 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3944 * sh-opc.h (sh_arg_type): Add new operand types.
3945 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3947 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3949 * Makefile.in (distclean): Remove generated file config.h.
3951 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3953 * Makefile.in (distclean): Remove generated file config.h.
3955 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3957 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3959 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3961 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3962 rather than numopcodes. Use m68k_opcodes rather than removed
3963 opcode function. Don't check F_ALIAS.
3964 (print_insn_arg): Change first parameter to be const char *.
3965 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3966 (m68k-opc.o): New target.
3967 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3968 * configure: Rebuild.
3970 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3972 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3973 (opcode_bits, opcode_hash_table): New variables.
3974 (opcodes_initialized): Renamed from opcodes_sorted.
3975 (build_hash_table): New function.
3976 (is_delayed_branch): Use hash table.
3977 (print_insn): Renamed from print_insn_sparc, made static.
3978 Build and use hash table. If !sparc64, ignore sparc64 insns,
3979 and vice-versa if sparc64.
3980 (print_insn_sparc, print_insn_sparc64): New functions.
3981 (compare_opcodes): Move sparc64 opcodes to end.
3982 Print commutative insns with constant second.
3983 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3985 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3987 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3988 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3989 avoids printing a delay slot in a delay slot.
3990 * sh-opc.h (sh_table): Fully bracket last entry.
3992 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3994 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3996 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3998 * configure.in: Get host_makefile_frag from ${srcdir}.
4000 * configure.in: Autoconfiscated. Check for string[s].h. Create
4001 config.h from config.in. Don't set up sysdep.h link.
4002 * sysdep.h: New file.
4003 * configure, config.in: New files, generated from configure.in.
4004 * Makefile.in: Updated to be processed autoconf-style.
4005 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4006 (Makefile): Depend on config.status.
4007 (config.status): New rule.
4008 * configure.bat: Update Makefile substitutions.
4010 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4012 * mips-opc.c (L1): Define.
4013 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4014 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4017 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4019 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4020 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4021 have multiple add units but only a single logical unit.
4023 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4024 shifted by 18, without any insertion or extraction function.
4025 (insert_cr, extract_cr): Remove.
4027 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4029 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4032 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4034 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4035 * sh-opc.h: Add copyright.
4037 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4039 * Makefile.in (crunch-m68k): Delete extra target accidentally
4040 checked in a while ago.
4042 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4044 * sh-opc.h (sh_table): Add SH3 support.
4046 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4048 * sh-opc.h: Added bsrf and braf.
4050 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4052 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4053 bogus [ls]fm{ea,fd} patterns.
4055 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4056 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4057 initialize it from memory. Make function static.
4058 (print_insn_{big,little}_arm): New functions.
4059 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4060 the correct endianness.
4062 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4064 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4067 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4069 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4070 17th, so that it builds again using GCC as the compiler.
4072 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4074 * mips-dis.c (print_insn_little_mips): Cast return value from
4075 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4076 expects an unsigned long, and that might be fewer words of
4077 argument storage (e.g., if bfd_vma is long long on a 32-bit
4079 (print_insn_big_mips): Likewise with bfd_getb32 value.
4080 (_print_insn_mips): Now static.
4082 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4084 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4085 gcc memory hog problem with initializer is fixed.
4087 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4089 Merge in support for Mac MPW as a host.
4090 (Old change descriptions retained for informational value.)
4092 * mpw-config.in (archname): Compute from the config.
4093 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4095 * mpw-config.in (target_arch): Compute from canonical target.
4096 (m68k, mips, powerpc, sparc): Add architectures.
4097 * mpw-make.in (disassemble.c.o): Add.
4098 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4100 * mpw-config.in (BFD_MACHINES): Set to a default value.
4101 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4103 * mpw-make.in (CSEARCH): Add extra-include to search path.
4105 * mpw-config.in (varargs.h): Don't create.
4106 (sysdep.h): Create using forward-include.
4107 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4109 * mpw-config.in: New file, MPW version of configure.in.
4110 * mpw-make.in: New file, MPW version of Makefile.in.
4112 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4114 * alpha-dis.c (print_insn_alpha): Put empty statement after
4117 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4119 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4120 (low_sign_extend): Likewise.
4121 (get_field): Delete unused function.
4122 (set_field, deposit_14, deposit_21): Likewise.
4124 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4126 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4129 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4131 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4133 * alpha-opc.h (OSF_ASMCODE): define
4134 print pal-code names as defined in App C of the
4135 Alpha Architecture Reference Manual
4137 * alpha-dis.c: cleaned up output
4138 print stylized code forms as defined in App A.4.3 of the
4139 Alpha Architecture Reference Manual
4141 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4143 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4145 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4148 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4150 * m68k-dis.c (opcode): New function. Returns address of opcode
4151 table entry given index, even if the opcode table was split to
4152 work around gcc bugs.
4153 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4155 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4156 (reg_names): Now const.
4157 (print_insn_arg): Arrays cacheFieldName and names now const.
4158 (print_indexed): Array scales now const.
4160 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4162 * ppc-opc.c: Sort recently added instructions by minor opcode
4163 number within major opcode number.
4165 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4167 * hppa-dis.c: Include libhppa.h.
4169 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4171 * mips-opc.c: Change dli to use M_DLI, and add dla.
4173 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4175 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4177 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4179 * mips-opc.c: Add r4650 mul instruction.
4181 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4183 * mips-opc.c: Add uld and usd macros for unaligned double load and
4186 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4188 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4189 mfdcr, mtdcr, icbt, iccci.
4191 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4193 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4194 signed char fields to shorts, more portable.
4196 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4198 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4199 char fields as signed chars, since they may have negative values.
4201 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4203 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4204 (mycroft@netbsd.org).
4206 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4208 From "Logg, Ed" <elogg@ea.com>:
4209 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4210 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4213 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4215 * ppc-opc.c: Changes based on patch from David Edelsohn
4216 <edelsohn@mhpcc.edu>.
4217 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4220 (insert_tbr): New static function.
4221 (extract_tbr): New static function.
4222 (XFXFXM_MASK, XFXM): Define.
4223 (XSPRBAT_MASK, XSPRG_MASK): Define.
4224 (powerpc_opcodes): Add instructions to access special registers by
4225 name. Add mtcr and mftbu.
4227 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4229 * mips-opc.c (P3): Define.
4230 (mips_opcodes): Add mad and madu.
4232 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4234 * configure.in: Add W65 support.
4235 * disassemble.c: Likewise.
4236 * w65-opc.h, w65-dis.c: New files.
4238 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4240 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4243 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4245 * mips-opc.c: Add dli as a synonym for li.
4247 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4249 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4250 print something for reserved opcode values, even if it won't
4253 * mips-dis.c (_print_insn_mips): When initializing, shift right
4254 and mask, to avoid sign extension problems on the Alpha.
4256 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4259 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4261 * sh-opc.h (mov.l gbr): Get direction right.
4262 * sh-dis.c (print_insn_shx): New function.
4263 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4264 print opcodes with right byte order.
4266 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4268 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4269 to avoid conflicts with getopt.
4271 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4273 * hppa-dis.c (print_insn_hppa): Read the instruction using
4274 bfd_getb32, so that it works on a little endian or 64 bit host.
4275 Remove unused local variable op.
4277 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4279 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4280 addu does not work correctly if -mips3.
4282 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4284 * a29k-dis.c (print_special): Add special register names defined
4285 on 29030, 29040 and 29050.
4286 (print_insn): Handle new operand type 'I'.
4288 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4290 * Makefile.in (INSTALL): Use top level install.sh script.
4292 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4294 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4295 that it works on a little endian host.
4297 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4299 * configure.in: Use ${config_shell} when running config.bfd.
4301 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4303 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4305 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4307 * a29k-dis.c (print_insn): Print the opcode.
4309 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4311 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4313 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4315 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4317 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4319 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4320 which store a value into memory.
4322 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4324 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4325 * arm-dis.c, arm-opc.h: New files.
4327 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4329 * Makefile.in (ns32k-dis.o): Add dependency.
4330 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4331 string, not as array of chars.
4333 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4335 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4337 * sparc-opc.c: Added sparclite extended FP operations, and
4338 versions of v9 impdep* instructions permitting specification of
4341 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4343 * i960-dis.c (reg_names): Now const.
4344 (struct sparse_tabent): New type, copied from array type in mem
4346 (ctrl): Local static array ctrl_tab now const.
4347 (cobr): Local static array cobr_tab now const.
4348 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4349 static variable mem_tab no longer explicitly initialized. Changed
4350 mem_init to const array of struct sparse_tabent.
4351 (reg): Local static variable reg_tab no longer explicitly
4352 initialized. Changed reg_init to const array of struct
4354 (ea): Local static array scale_tab now const.
4356 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4359 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4361 * configure.bat: the disassember needs to be enabled for
4362 "objdump -d" to work in djgpp.
4364 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4366 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4367 (invalid_float): Enabled general version, doesn't require running
4368 on ns32k host. Changed to take char* argument, and test for
4369 explicitly specified sizes, instead of using sizeof() on host CPU
4371 (INVALID_FLOAT): Cast first argument.
4372 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4373 list_P032, list_M032): Now const.
4374 (optlist, list_search): Made appropriate arguments now point to
4376 (print_insn_arg): Changed static array of one-character-string
4377 pointers into a static const array of characters; fixed sprintf
4378 statement accordingly.
4380 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4382 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4383 from distribution. A ns32k-dis.c from a previous distribution has
4384 been brought up to date and supports the new interface.
4386 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4388 * configure.in: add bfd_ns32k_arch target support.
4390 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4391 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4393 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4395 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4398 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4400 * h8300-dis.c, mips-dis.c: Don't use true and false.
4402 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4404 * configure.in: Change --with-targets to --enable-targets.
4406 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4408 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4409 opcodes to the first instruction with that opcode, to speed
4410 disassembly of large files. From ralphc@pyramid.com (Ralph
4413 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4415 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4417 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4419 * configure.bat: update to latest makefile.in
4421 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4423 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4424 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4425 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4426 slot insn is in a delay slot.
4427 * z8k-opc.h: (resflg): Fix patterns.
4428 * h8500-opc.h Fix CR insn patterns.
4430 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4432 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4433 "cmpl" before POWER versions, so that gas -many uses them.
4435 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4437 * disassemble.c: New file.
4438 * Makefile.in (OFILES): Add disassemble.o.
4439 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4440 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4441 binutils/configure.in.
4443 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4444 opcode being examined.
4446 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4448 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4449 (insert_ral, insert_ram, insert_ras): New functions.
4450 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4451 RAS for store with update.
4453 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4455 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4456 (edelsohn@npac.syr.edu).
4458 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4460 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4463 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4465 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4467 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4469 * ppc-opc.c (powerpc_operands): The signedp field has been
4470 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4471 instead. Add new operand SISIGNOPT.
4472 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4473 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4474 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4477 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4479 * i386-dis.c (struct private): Renamed to dis_private. `private'
4480 is a reserved word for dynix cc.
4482 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4484 * configure.in: Change error message to refer to bfd/config.bfd
4485 rather than bfd/configure.in.
4487 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4489 * ppc-opc.c: Define POWER2 as short alias flag.
4490 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4493 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 * i960-dis.c (print_insn_i960): Don't read a second word for
4496 opcodes 0, 1, 2 and 3.
4498 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4500 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4502 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4504 * m68881-ext.c: Removed; no longer used.
4505 * Makefile.in: Changed accordingly.
4507 * m68k-dis.c (ext_format_68881): Don't declare.
4508 (print_insn_m68k): If an instruction uses place 'i', it uses at
4509 least four fixed bytes.
4510 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4511 extended float, convert to double using floatformat_to_double, not
4512 ieee_extended_to_double, and fetch the data before converting it.
4514 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4516 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4517 davidj@ICSI.Berkeley.EDU (David Johnson).
4519 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4521 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4522 PowerPC uses bdnz[l][a].
4524 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4526 * dis-buf.c, i386-dis.c: Include sysdep.h.
4528 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4530 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4532 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4533 by Motorola PowerPC 601 with PPC_OPCODE_601.
4534 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4535 Disassemble Motorola PowerPC 601 instructions as well as normal
4536 PowerPC instructions.
4538 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4540 * i960-dis.c (reg, mem): Just use a static array instead of
4543 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4545 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4546 condition name index if this is for a negated condition.
4548 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4549 Floating point format for 'H' operand is backwards from normal
4550 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4551 operands (fmpyadd and fmpysub), handle bizarre register
4552 translation correctly for single precision format.
4554 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4555 or 'I' operands if the next format specifier is 'M' (fcmp
4556 condition completer).
4558 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4560 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4561 single number giving a bitmask for the MB and ME fields of an M
4562 form instruction. Change NB to accept 32, and turn it into 0;
4563 also turn 0 into 32 when disassembling. Seperated SH from NB.
4564 (insert_mbe, extract_mbe): New functions.
4565 (insert_nb, extract_nb): New functions.
4566 (SC_MASK): Mask out SA and LK bits.
4567 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4568 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4569 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4570 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4571 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4572 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4573 (powerpc_macros): Define table of macro definitions.
4574 (powerpc_num_macros): Define.
4576 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4577 if PPC_OPERAND_NEXT is set.
4579 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4582 char. Retrieve contents using bfd_getl32 instead of shifting.
4584 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4586 * ppc-opc.c: New file. Opcode table for PowerPC, including
4587 opcodes for POWER (RS/6000).
4588 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4589 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4590 (CFILES): Add ppc-dis.c.
4591 (ppc-dis.o, ppc-opc.o): New targets.
4592 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4594 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4596 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4597 No space before 'u', 'f', or 'N'.
4599 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4601 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4602 farther than we should.
4604 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4606 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4608 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4610 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4612 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4613 needs it, to prevent reading past the end of a section.
4615 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4617 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4618 Removed t,A case for la; always use t,A(b) case.
4620 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4622 From Ted Lemen <mellon@pepper.ncd.com>
4623 * mips-dis.c (print_insn_arg): Handle 'k'.
4624 * mips-opc.c: Make cache use k, not t.
4626 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4628 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4629 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4630 FLOAT_FORMAT_CODE to put out floating point register names.
4632 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4636 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4638 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4640 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4642 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4643 larger than 32. Moved dsxx32 variants first for disassembler.
4645 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4647 * z8kgen.c, z8k-opc.h: Add full lda information.
4649 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4651 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4652 movb instructions. Any necessary space will be emitted by
4653 the code to handle nullification completers.
4655 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4657 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4659 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4661 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4662 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4664 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4666 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4668 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4670 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4671 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4673 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4675 * m88k-dis.c (m88kdis): comment change. Remove space after
4677 (printop): handle new arg types DEC and XREG for m88110.
4679 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4681 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4682 type for absolute branch addresses. Delete special
4683 "ble" and "be" code in 'W' operand code.
4685 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4687 * mips-opc.c: Set hazard information correctly for branch
4688 likely instructions.
4690 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4692 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4693 info->fprintf_func for printing and info->print_address_func for
4696 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4698 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4700 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4702 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4703 Corrected second case of "b" for disassembler.
4705 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4707 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4708 to BFD swapping routines to correspond to BFD name changes.
4710 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4712 * mips-opc.c: Change div machine instruction to be z,s,t rather
4713 than s,t. Change div macro to be d,v,t rather than d,s,t.
4714 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4715 rem and remu which generates only the corresponding div
4716 instruction. This is for compatibility with the MIPS assembler,
4717 which only generates the simple machine instruction when an
4718 explicit destination of $0 is used.
4719 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4721 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4723 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4724 WR_31 hazard for bal, bgezal, bltzal.
4726 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4728 * hppa-dis.c (print_insn_hppa): Use print function
4729 from within the disassemble_info, not fprintf_filtered.
4731 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4733 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4734 Law, law@cs.utah.edu.)
4736 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * mips-opc.c ("absu"): Removed.
4741 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4743 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4744 Changed hazard information to distinguish between memory load
4745 delays and coprocessor load delays.
4747 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4751 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4753 * configure.in: Don't pass cpu to config.bfd.
4755 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4757 * m88k-dis.c (m88kdis): Make class unsigned.
4759 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4761 * alpha-dis.c (print_insn_alpha): One branch format case was
4762 missing the instruction name.
4764 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4766 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4767 Add the arch-specific auxiliary files.
4768 (OFILES): Remove the arch-specific auxiliary files
4769 and use BFD_MACHINES instead of DIS_LIBS.
4770 * configure.in: Set BFD_MACHINES based on --with-targets option.
4772 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4774 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4777 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4779 * sparc-opc.c: Change CONST to const to deal with gcc
4780 -Dconst=__const -traditional.
4782 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4784 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4785 coprocessor instructions out of #if 0, and made them use new
4788 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4790 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4792 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4794 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4795 instruction, for use by the disassembler.
4797 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4798 hand-coded sign extensions that depended on 32-bit host ints.
4799 FIXME, we still depend on big-endian host bitfield ordering.
4800 (sparc_print_insn): Set the insn_info_valid field, and the
4801 other fields that describe the instruction being printed.
4803 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4805 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4806 `jmp' instead of just one of them.
4808 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4810 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4811 (fput_fp_reg_r): Renamed from fput_reg_r.
4812 (fput_fp_reg): New function.
4813 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4815 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4817 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4819 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4821 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4823 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4824 don't output a space.
4826 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4828 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4830 * mips-opc.c: New file, containing opcode table from
4831 ../include/opcode/mips.h.
4832 * Makefile.in: Add it.
4834 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4836 * m88k-dis.c: New file, moved in from gdb and changed to use the
4837 new dis-asm.h disassembler interface.
4838 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4839 (m88k-dis.o): New target.
4841 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4843 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4844 argument string const char * to correspond to opcode/mips.h.
4846 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4848 * mips-dis.c: Updated to account for name changes in new version
4850 * Makefile.in: Added header file dependencies.
4852 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4854 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4856 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4858 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4859 extend, rather than shifts.
4861 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4863 * Makefile.in: Undo 15 June change.
4865 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4867 * m68k-dis.c (print_insn_arg): Change return value to byte count
4869 * m68k-dis.c: Re-write to detect invalid operands before
4870 printing anything, so we can handle this the same way we
4871 handle invalid opcodes.
4873 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4875 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4877 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4879 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4882 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4884 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4886 * configure.in: Do make sysdep.h link.
4887 * Makefile.in: Search ../include. Don't search ../bfd.
4889 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4891 Changes from Jeff Law, law@cs.utah.edu:
4892 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4893 Do not print a space before the completers specified by
4896 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4898 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4899 defined, since gdb has been fixed.
4901 Changes from Jeff Law, law@cs.utah.edu:
4902 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4903 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4904 be a *disassemble_info, not a *FILE.
4905 * hppa-dis.c: Support 'd', '!', and 'a'.
4906 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4907 * hppa-dis.c: Delete cases which are no longer needed.
4909 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4911 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4913 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4915 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4918 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4920 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4921 * configure.in: No longer need to configure to get sysdep.h.
4923 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4925 * Patches from Jeffrey Law <law@cs.utah.edu>.
4926 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4927 templates for 1.1 FP computational instructions.
4929 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4931 * h8500-dis.c (print_insn_h8500): Address argument is type
4933 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4936 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4937 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4939 * sparc-dis.c (compare_opcodes): Move static declaration to
4942 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4944 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4945 instruction, remove unimp hack from 'l' argument.
4947 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4949 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4952 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4954 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4955 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4958 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4960 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4961 arrays of string pointers to 2-d arrays of chars, to save
4964 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4966 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4967 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4969 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4971 * hppa-dis.c: New file from Utah, adapted to new disassembler
4973 * Makefile.in: Include it.
4975 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4977 * sh-dis.c, sh-opc.h: New files.
4979 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4981 * alpha-dis.c, alpha-opc.h: New files.
4983 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4985 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4988 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4990 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4992 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4994 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4997 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4999 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5000 and double percent signs a few places.
5002 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5004 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5005 Use info->print_address_func not print_address.
5007 * dis-buf.c (generic_print_address): New function.
5009 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5011 * Makefile.in: Add sparc-dis.c.
5012 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5014 Add `add' instruction to the set that get checked
5015 for a preceding `sethi' in order to print an absolute address.
5016 * (print_insn): Disassembly prefers real instructions.
5017 (is_delayed_branch): Speed up.
5018 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5019 Still missing some float ops, and needs testing.
5020 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5021 F_ALIAS. Use printf, not fprintf, when not passing a file
5023 (compare_opcodes): Check that identical instructions have
5024 identical opcodes, complain otherwise.
5027 * Include reg_names.
5029 Use dis-asm.h/read_memory_func interface.
5031 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5033 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5034 deliberately return non-zero to setjmp from longjmp. Otherwise
5035 this code fails to compile.
5037 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5039 * m68k-dis.c: Fix prototype for fetch_arg().
5041 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5043 * dis-buf.c: New file, for new read_memory_func interface.
5044 Makefile.in (OFILES): Include it.
5045 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5046 Use new read_memory_func interface.
5048 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5050 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5051 * h8500-opc.h: Fix couple of opcodes.
5053 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5055 * Makefile.in: add dvi & installcheck targets
5057 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5059 * Makefile.in: Update for h8500-dis.c.
5061 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5063 * h8500-dis.c, h8500-opc.h: New files
5065 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5067 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5068 ../include/dis-asm.h.
5069 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5070 and ../gdb/m68k-pinsn.c).
5071 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5072 and ../gdb/i386-pinsn.c).
5073 * m68881-ext.c: New file. Moved definition of
5074 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5075 * Makefile.in: Adjust for new files.
5076 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5077 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5078 can be dis-assembled.
5080 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5082 * mips-dis.c (print_insn_arg): Now returns void.
5084 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5086 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5087 files that use the macros.
5089 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5091 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5092 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5093 (CFILES): Added mips-dis.c.
5095 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5097 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5098 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5100 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5102 * Makefile.in: Improve *clean rules.
5103 * configure.in: Allow a default host.
5105 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5107 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5108 files include other sysdep files
5110 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5112 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5114 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5116 * configure.in: For host support, use ../bfd/configure.host
5117 so it stays in sync with the ../bfd/hosts database.
5119 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5121 * configure.in: use cpu-vendor-os triple instead of nested cases
5123 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5125 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5126 *always* the wrong one.
5128 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5130 * z8kgen.c: added copyright info
5132 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5134 * z8k-dis.c (unparse_instr): prettier tabs
5135 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5137 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5139 * configure.in: Add ncr* configuration.
5140 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5141 picayune ANSI compilers happy.
5143 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5145 * configure.in (i386): Make i386 and i486 synonymous for now.
5146 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5148 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5150 * Makefile.in (install): Fix typo.
5152 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5154 * Makefile.in (make): Remove obsolete crud.
5155 (sparc-opc.o): Avoid Sun Make VPATH bug.
5157 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5159 * Makefile.in: since there are no SUBDIRS, remove rule and
5160 references of subdir_do.
5162 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5164 * Makefile.in (install): Get the library name right here too.
5165 Don't install bfd.h, since it's unrelated to this library. No
5166 subdirs to recurse into, either.
5167 (CFILES): The source file has a .c suffix, not .o.
5169 * sparc-opc.c: New file, moved from BFD.
5170 * Makefile.in (OFILES): Build it.
5172 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5174 * z8k-dis.c: fixed forward refferences of some declarations.
5176 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5178 * Makefile.in: get the name of the library right
5180 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5182 * z8k-dis.c: knows how to disassemble z8k stuff
5183 * z8k-opc.h: new file full of z8000 opcodes
5187 version-control: never
projects / platform / upstream / binutils.git / blob