1 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * i386-dis.c: Don't print opcode suffix when we can figure out the
4 size (and gas can!) by register operands, or from the default
6 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
8 (dis386, dis386_twobyte, grps): Use new suffix macros.
9 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
10 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
11 order of cmps operands to agree with Intel docs. Correct operand
12 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
13 agree with Intel docs.
14 (print_insn_x86): Print orphan fwait before other prefixes.
15 Return correct byte count for orphan fwait with prefixes. Don't
16 print `bound' operands in reverse order.
17 (ckprefix): Stop accumulating prefixes if we get fwait.
18 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
20 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
22 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
23 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
25 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
27 Fix problems when bfd_vma is wider than long.
28 * i386-dis.c: Make op_address and start_pc unsigned.
29 (set_op): Make parameter unsigned.
30 (print_insn_x86): Cast to bfd_vma when passing a value to
32 * ns32k-dis.c (CORE_ADDR): Don't define.
33 (print_insn_ns32k): Change type of addr to bfd_vma. Use
34 bfd_scan_vma to read back address.
35 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
37 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
38 (NEXTULONG): New definition.
39 (print_insn_m68k): Avoid overflow when computing third argument of
41 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
42 Use disp instead of val to store offset values.
43 (print_indexed): Use base_disp instead of word to store base
44 displacement, to avoid overflow.
45 * m10300-dis.c (disassemble): Cast value to long when computing
46 pc-relative address, to get correct sign extension.
48 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
50 * m32r-opc.c: Regenerate.
52 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
54 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
55 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
57 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
59 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
61 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
63 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
65 (OP_DSreg): Rename from OP_DSSI.
66 (OP_ESreg): Rename from OP_ESDI.
67 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
69 (append_seg): Rename from append_prefix.
70 (ptr_reg): New function.
71 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
73 (PREFIX_ADDR): Rename from PREFIX_ADR.
74 (float_reg): Add non-broken opcodes for people who don't want
77 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
79 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
82 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
84 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
86 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
88 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
89 0; produce error message for shifts of size 32 (or 64 for 64-bit
90 shifts), because the hardware doesn't support them.
93 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
95 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
98 * vu0.h (sqc2): Fix opcode.
100 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
104 start-sanitize-vr5400
105 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
107 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
108 Change pinfo to use WR_HILO.
112 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
114 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
115 LONG_2, LONG_2b formats to use this new operand.
118 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
120 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
122 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
124 * sparc-dis.c (print_insn_sparc): big endian instruction / little
128 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
130 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
131 and SHORT_B3b formats to use Rb instead of Ra.
133 Add FLAG_MUL16 to MUL2XH opcode.
135 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
136 to existing 1.1.1 parallelisation prohibition procedure.
139 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
141 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
142 * cgen-dis.in (extract_normal): Likewise.
143 * m32r-asm.c,m32r-dis.c: Regenerate.
146 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
148 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
152 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
154 * mips-opc.c (multu1): Add two operand variant for the r5900.
157 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
159 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
160 with a shift count of 0.
163 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
165 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
167 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
169 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
170 (_print_insn_mips): Likewise.
171 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
175 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
177 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
178 (cgen_hw_lookup_by_num): New function.
181 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
184 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
186 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
188 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
190 * sparc-dis.c (print_insn_sparc): Always fetch instructions
191 as big-endian on SPARClite.
194 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
196 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
198 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
203 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
205 * d30v-opc.c (pre_defined_register): Remove alias for r0.
209 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
211 * mips-opc.c (break): Added 20-bit single-operand break
212 instruction for R5900 only.
215 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
217 * po/Make-in (install-info): New target.
219 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
221 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
222 * configure: Rebuild.
224 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
226 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
227 variety of ISA2 instructions to set bottom ten bits of trap code.
229 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
231 * Makefile.am (config.status): Add explicit target so that
232 config.status depends upon bfd/configure.in.
233 * Makefile.in: Rebuild.
235 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
237 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
238 instructions to set bottom ten bits of break code.
239 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
240 for above optional argument.
242 start-sanitize-cygnus
243 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
245 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
246 * m32r-opc.h: Regenerate.
249 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
251 * makefile.vms: Run dec c with /nodebug.
253 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
255 * Makefile.in: Rebuilt.
256 * Makefile.am: Regenerated dependencies with mkdep.
258 * opintl.h (_): Define as dgettext.
260 start-sanitize-cygnus
261 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
263 * configure.in: Add support for --enable-cgen-maint.
264 * Makefile.am (M32R_DEPS): New variable.
265 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
266 * aclocal.m4: Regenerate.
267 * Makefile.in: Regenerate.
268 * configure: Regenerate.
270 * Makefile.am (CGENFILES): Add minsn.scm.
273 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
275 * cgen-asm.c: Internationalised.
276 start-sanitize-cygnus
277 * cgen-asm.in: Internationalised.
278 * cgen-opc.in: Internationalised.
280 * m32r-asm.c: Internationalised.
281 * m32r-dis.c: Internationalised.
282 * m32r-opc.c: Internationalised.
284 * aclocal.m4: Regenerated.
285 * configure: Regenerated.
286 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
287 * Makefile.in: Rebuild.
288 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
289 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
291 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
293 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
295 * aclocal.m4, configure: Rebuild with current tools.
297 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
299 * opintl.h: New file - contains internationalisation macros used
300 by source files in this directory.
301 * po/: New subdirectory - contains internationalisation files.
302 * po/Make-in: New file - Makefile constructor.
303 * po/POTFILES.in: New file - list of files in opcodes directory
304 that should be scan for internationalisation macros.
305 * po/opcodes.pot: New file - list of internationisation strings
306 found in files mentioned in po/POTFILES.in.
307 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
308 entry. Add intl directory to include paths.
309 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
310 HAVE_STRCPY, HAVE_LC_MESSAGES
311 * configure.in: Add rule to build Makefile in po subdirectory.
312 * Makefile.in: Rebuilt.
313 * aclocal.m4: Rebuilt.
314 * config.in: Rebuilt.
315 * configure: Rebuilt.
316 * alpha-opc.c: Internationalised.
317 * arc-dis.c: Internationalised.
318 * arc-opc.c: Internationalised.
319 * arm-dis.c: Internationalised.
320 * cgen-asm.c: Internationalised.
322 * d30v-dis.c: Internationalised.
324 * dis-buf.c: Internationalised.
326 * dvp-dis.c: Internationalised.
327 * dvp-opc.c: Internationalised.
329 * h8300-dis.c: Internationalised.
330 * h8500-dis.c: Internationalised.
331 * i386-dis.c: Internationalised.
332 * m10200-dis.c: Internationalised.
333 * m10300-dis.c: Internationalised.
334 * m68k-dis.c: Internationalised.
335 * m88k-dis.c: Internationalised.
336 * mips-dis.c: Internationalised.
337 * ns32k-dis.c: Internationalised.
338 * opintl.h: Internationalised.
339 * ppc-opc.c: Internationalised.
340 * sparc-dis.c: Internationalised.
341 * v850-dis.c: Internationalised.
342 * v850-opc.c: Internationalised.
344 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
346 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
347 (asm_hash_table_entries): New variable.
348 (cgen_asm_init): Free asm_hash_table_entries.
349 (hash_insn_array,hash_insn_list): New functions.
350 (build_asm_hash_table): Use them. Hash macro insns as well.
351 (cgen_asm_lookup_insn): Update.
352 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
353 (dis_hash_table_entries): New variable.
354 (cgen_dis_init): Free dis_hash_table_entries.
355 (hash_insn_array,hash_insn_list): New functions.
356 (build_dis_hash_table): Use them. Hash macro insns as well.
357 (cgen_dis_lookup_insn): Update.
358 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
359 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
360 (cgen_macro_insn_count): New function.
361 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
362 All callers updated. Sanity check result of extract fn.
363 (@arch@_cgen_get_insn_operands): Change result type to void.
364 Delete args insn_value, length. New arg fields. All callers updated.
365 (@arch@_cgen_lookup_get_insn_operands): New function.
366 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
368 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
370 * i386-dis.c (OP_DSSI): Print segment override.
373 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
375 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
379 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
381 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
385 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
387 * vu0.h (vlqd, vlqi): Update per revised specs.
391 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
393 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
394 (vif_operands): Update.
395 (vif_get_unpackloc): Delete.
396 (state_vif_unpackloc{,_star_p}): Delete.
397 (dvp_opcode_init_parse): Update.
398 (vif_unpack_len_value): Avoid divide by zero.
402 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
404 * vu0.h: Specs changed for VCALLMSR bit pattern.
405 * mips-dis.c: (print_insn_arg) Matching change.
408 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
410 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
413 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
415 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
416 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
417 * configure.in: Define and substitute WIN32LDFLAGS and
419 * aclocal.m4: Rebuild with new libtool.
420 * configure, Makefile.in: Rebuild.
423 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
425 * vu0.h: Corrected bit pattern for VMAXI opcode.
428 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
430 * m32r-opc.c: Regenerate.
433 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
435 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
436 (dvp_expand_macro): Implement.
437 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
438 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
441 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
443 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
444 before trying to copy it.
445 * Makefile.in: Rebuild.
447 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
449 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
452 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
454 * m32r-opc.c: Fix bit patterns for SAT and SATB.
457 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
459 * ns32k-dis.c (bit_extract_simple): New function to extract bits
460 from an arbitrary valid buffer instead of fetching them on demand
462 (invalid_float): use bit_extract_simple() instead of bit_extract().
465 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
467 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
468 * m32r-opc.h: Add extra control registers.
471 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
473 From H.J. Lu <hjl@gnu.org>:
474 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
477 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
479 * Branched binutils 2.9.
482 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
484 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
485 disassembling last 4 bytes of a section.
488 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
490 Fix some gcc -Wall warnings:
491 * arc-dis.c (print_insn): Add casts to avoid warnings.
492 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
493 * d10v-dis.c (dis_long, dis_2_short): Likewise.
495 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
496 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
497 (parse_bc, parse_vfreg, parse_accdest): Likewise.
498 (parse_ffstreg, parse_vif_mode): Likewise.
500 * m10200-dis.c (disassemble): Likewise.
501 * m10300-dis.c (disassemble): Likewise.
502 * ns32k-dis.c (print_insn_ns32k): Likewise.
503 * ppc-opc.c (insert_ral, insert_ram): Likewise.
504 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
505 * cgen-opc.c (cgen_keyword_search_next): Likewise.
506 * d10v-dis.c (dis_long, dis_2_short): Likewise.
508 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
511 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
512 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
513 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
515 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
517 * tic80-dis.c (print_one_instruction): Likewise.
519 * w65-dis.c (print_operand): Likewise.
520 * z8k-dis.c (fetch_data): Likewise.
521 * a29k-dis.c: Add return type for find_byte_func_type.
522 * arc-opc.c: Include <stdio.h>. Remove declarations of
523 insert_multshift and extract_multshift.
525 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
527 (extract_value): Fully parenthesize expression.
530 * dvp-opc.c: Include <ctype.h>.
531 (print_sdest): Add default case to switch.
533 * h8500-dis.c (print_insn_h8500): Initialize local variables.
534 * h8500-opc.h (h8500_table): Fully bracket initializer.
535 * w65-opc.h (optable): Likewise.
536 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
537 * i386-dis.c (OP_E): Initialize local variables.
538 * m10200-dis.c (print_insn_mn10200): Likewise.
539 * mips-dis.c (print_insn_mips16): Likewise.
540 * sh-dis.c (print_insn_shx): Likewise.
541 * v850-dis.c (print_insn_v850): Likewise.
542 * ns32k-dis.c (print_insn_arg): Declare.
543 (get_displacement, invalid_float): Declare.
544 (list_search, sign_extend, flip_bytes): Declare return type.
545 (get_displacement): Likewise.
546 (print_insn_arg): Likewise. Make d int. Fix sprintf format
548 (print_insn_ns32k): Make i unsigned.
549 (invalid_float): Make static. Declare type of val.
550 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
551 on each for iteration.
552 * tic30-dis.c (get_indirect_operand): Likewise.
553 * z8k-dis.c (print_insn_z8001): Declare return type.
554 (print_insn_z8002): Likewise.
555 (unparse_instr): Fix sprintf format strings.
557 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
559 * mips-opc.c: Add "sync.l" and "sync.p".
562 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
564 * dvp-opc.c (extract_vif_datalen): Rewrite.
565 (vif_insn_len): Perform 0->max+1 conversion for direct length.
567 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
569 * dvp-dis.c (print_insn): Print unpack address in hex.
570 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
571 Don't skip over '*', just record it.
572 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
573 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
574 Don't skip over '*', just record it.
575 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
576 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
577 (vif_opcodes): Likewise.
578 (state_vif_{mpg,unpack}loc_star_p): New static locals.
579 (vif_macros,vif_macro_count): New globals.
580 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
581 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
582 (vif_get_wl_cl): New function.
583 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
586 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
588 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
589 default m68k variant to recognize.
591 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
592 (ctrl, cobr, mem, ea): Likewise.
593 (print_addr): Likewise. Remove cast.
594 (ea): Cast argument of print_addr to bfd_vma.
596 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
598 (cgen_parse_unsigned_integer): Likewise.
599 (cgen_parse_address): Likewise.
601 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
603 * i960-dis.c (ctrl): Add full braces to structure initialization.
604 (cobr, mem, reg): Likewise.
605 (ea): Correct parenthesization in expression.
607 * cgen-asm.c: Include <ctype.h>.
608 (build_asm_hash_table): Remove unused local variable i.
609 (cgen_parse_keyword): Add casts to avoid warnings.
611 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
612 symbol. Fix indentation.
613 (print_insn_little_arm): Likewise.
616 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
618 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
623 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
625 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
630 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
632 * dvp-opc.c (vif_operand_datalen_special): New global.
636 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
638 * vu0.h (vcallms): Use 'O' for call target operand.
639 * mips-dis.c (print_insn_arg): Handle 'O'.
642 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
644 * configure.in: Use AM_DISABLE_SHARED.
645 * aclocal.m4, configure: Rebuild with libtool 1.2.
648 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
650 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
655 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
657 These patches are courtesy of Jonathan Walton and Tony Thompson
658 (athompso@cambridge.arm.com).
660 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
663 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
664 both the offset and the label closest to the destination.
667 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
669 * vu0.h: New file with cop2/vu0 instructions.
670 * mips-opc.c: Include vu0.h.
671 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
673 (print_insn_mips): Do not emit a tab after an instruction if the
674 first arg is an instruction completer (&). If the next arg is an
675 escape character (%), then print the next arg verbatim.
676 * Makefile.am (mips-opc.lo): Depend on vu0.h
680 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
682 * dvp-opc.c (vif_opcodes): Add stcycl.
684 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
686 * dvp-dis.c (print_dma): Change length from 16 to 8.
689 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
691 * m32r-opc.h: Regenerate.
694 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
696 * dvp-opc.c (print_dest1): Print dest spec again.
697 (print_vfreg,print_accdest): Likewise.
698 (vif_unpack_len): Round result up to word boundary.
701 start-sanitize-vr4320
702 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
704 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
706 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
708 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
713 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
715 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
716 (print_insn): Do mask comparison on proper opcode word.
717 Print unsigned values in hex.
718 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
719 (parse_bc): Catch missing dest.
720 (parse_vfreg): Replace atoi call with strtol.
721 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
722 (parse_bcftreg,parse_ffstreg): Handle missing dest.
723 (extract_gif_eop): New function.
724 (gif_operands): Update eop entry.
725 (VGIFOP,VGIFNREGS): Fix calcs.
726 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
727 (gif_regs): Add entry for unused 11 case.
728 (print_gif_regs): Print empty list instead of nothing.
729 (extract_gif_nloop): Fix value calc.
730 (print_gif_nloop): Always print value, even if 0.
731 (insert_vif_wlcl,extract_vif_wlcl): New functions.
732 (vif_operands): Use them for wl,cl fields.
733 (state_vif_wl,state_vif_cl): New static locals.
734 (parse_vif_mode): Handle numeric args.
735 (vif_unpack_len_value,vif_unpack_len): New functions.
736 (vif_insn_len): Call vif_unpack_len.
739 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
741 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
743 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
745 * cgen-asm.in: Move insertion of generated routines to top of file.
746 (insert_normal): Add prototype. Delete `shift' arg.
747 * cgen-dis.in: Move insertion of generated routines to top of file.
748 (extract_normal): Add prototype. Delete `shift' arg.
749 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
750 (print_keyword): Add prototype. Fix type of `attrs' arg.
752 start-sanitize-vr4320
753 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
755 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
756 * mips-opc.c ("mac","dmac") : Added 4320 insns.
759 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
761 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
762 assume that info->symbols is non-empty.
764 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
766 * alpha-opc.c (cvtqs) There is no such thing.
767 (cvttq): Missing most of the /*d variants.
770 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
772 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
774 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
775 (r5900/msub.s): Takes three operands, not four. Fix opcode.
779 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
781 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
782 delayed branches or jumps.
786 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
788 * dvp-opc.c (vif_operands): Add unpack[u] support.
789 (vif_opcodes): Ditto.
790 (*_vif_imrubits): Renamed from *_vif_imrbits.
792 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
794 * dvp-dis.c (print_insn): Handle word number.
795 Handle mips address vs vu address.
796 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
797 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
798 ({insert,extract}_dma_addr): Fix word ofset.
799 ({insert,print}_gif_regs): Fix encode/decode.
802 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
804 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
806 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
807 * tic30-dis.c (print_branch): Likewise.
809 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
810 * dvp-dis.c (dvp_info_mach_type): New function.
811 (print_insn_dvp): Call it.
812 (print_vif): Return length of 4 if mpg or direct insn so following
813 insns get properly disabled.
814 (print_gif): Fix word order.
815 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
816 (gif_operands): Fix word order.
817 (gif_opcodes): Likewise.
818 ({insert,extract,print}_gif_regs): Likewise.
819 (gif_regs): Add new register number/name changes.
820 (dma_opcodes): Add dmarefe insn.
823 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
825 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
826 saved_symbol code as it is no longer needed.
828 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
830 * cgen-asm.c: Include symcat.h.
831 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
833 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
836 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
838 * dvp-opc.c (extra_dma_flags): Fix typos.
839 (dma_operands): Fix word numbers.
840 (dma_opcodes): Likewise.
841 ({insert,extract}_dma_flags): Likewise.
844 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
846 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
849 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
851 * dvp-dis.c (print_gif): Complete.
852 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
853 (state_gif_{nregs,regs,nloop}): New static locals.
855 (dvp_opcode_init_{parse,print}): Init gif state locals.
856 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
857 (vif_insn_len): Handle `unpack'.
858 ({insert,extract}_dma_flags): Complete.
862 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
864 * mips-opc.c (mula.s): Renamed from multa.s.
867 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
869 * m32r-opc.[ch]: Regenerate.
872 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
874 * dvp-opc.c (dma_operands): Rewrite.
875 (dma_operand_{count,addr}): New globals.
876 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
877 (insert_dma_addr): Insert value into insn.
878 (extract_dma_addr): Extract value from insn.
880 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
882 * dvp-dis.c (print_vu): Handle loi insns.
883 (print_insn): Likewise.
884 * dvp-opc.c (vu_lower_opcodes): Add "loi".
885 (vu_operands): Make LDEST1 a FAKE operand.
886 (parse_dest1): Allow elided argument.
887 (print_dest1): Don't print the argument.
889 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
891 * dvp-opc.c (parse_vfreg): Dest spec is optional.
892 (print_vfreg): Don't print dest spec.
893 (parse_accdest): Dest spec is optional.
894 (print_accdest): Don't print dest spec.
897 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
899 * Makefile.am (CGENFILES): Update.
900 * Makefile.in: Regenerate.
901 * cgen-asm.in (insert_normal): Result is error message now.
902 Validate value to be inserted.
903 (insert_insn_normal): Result is error message now.
904 (@arch@_cgen_assemble_insn): Update.
905 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
906 arguments. Don't perform validation here.
907 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
909 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
911 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
912 operand instance list.
913 * m32r-opc.c: Regenerate.
915 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
917 * Makefile.am (AUTOMAKE_OPTIONS): Define.
918 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
920 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
922 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
924 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
926 * configure.in: Get the version number from BFD.
927 * configure: Rebuild.
929 From H.J. Lu <hjl@gnu.org>:
930 * Makefile.am (libopcodes_la_LDFLAGS): Define.
931 * Makefile.in: Rebuild.
933 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
935 * m32r-opc.c: Regenerate.
936 * m32r-opc.h: Regenerate.
938 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
940 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
941 Ignore ALIAS insns if asked to.
942 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
943 * m32r-opc.c: Regenerate.
946 * dvp.opc.c: Nicely format opcode tables.
947 (vu_operands): New element UFLAGS.
948 (parse_uflags,print_uflags): New functions.
949 (vu_upper_opcodes): Add UFLAGS to all insns.
952 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
954 Fix rac to accept only a0:
955 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
956 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
957 Introduce OPERAND_GPR.
958 * d10v-dis.c (print_operand): Likewise.
960 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
962 * cgen-opc.in: New file.
963 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
964 * Makefile.am (CGENFILES): Add cgen-opc.in.
965 * Makefile.in: Regenerate.
967 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
968 (cgen_hw_lookup): Make result const.
970 * cgen-dis.in (*): Use PTR instead of void *.
971 (print_insn): Delete unused vars `i', `syntax'.
973 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
976 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
978 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
979 (vif_opcodes): Update renamed insns.
980 * dvp-dis.c (*): Likewise.
983 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
985 * configure, aclocal.m4: Rebuild with new libtool.
988 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
990 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
991 instructions use a PC relative branch, not absolute.
994 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
996 * configure.in: Set libtool_enable_shared rather than
997 libtool_shared. Remove diversion hack.
998 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1000 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1002 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1003 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1005 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1007 * tic30-dis.c: New file.
1008 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1009 * configure.in: Handle bfd_tic30_arch.
1010 * Makefile.am: Rebuild dependencies.
1011 (CFILES): Add tic30-dis.c
1012 (ALL_MACHINES): Add tic30-dis.lo.
1013 * configure, Makefile.in: Rebuild.
1015 start-sanitize-m32rx
1016 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1018 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1019 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1020 macwhi-a and macwlo-a instructions.
1024 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1026 * dvp-opc.c, fixed encoding of a bunch of instructions to
1027 be consistent with the asmvu assembler (and inconsistent
1028 with the specification).
1030 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1032 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1033 in the opcode table. The pkemscalf instruction must come first.
1035 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1037 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1040 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1042 * m32r-opc.h (HAVE_CPU_M32R): Define.
1045 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1047 * dvp-dis.c, dvp-opc.c: New files.
1048 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1049 * configure: Regenerate.
1050 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1051 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1052 (mips-dis.lo): Compile with @archdefs@.
1053 * Makefile.in: Regenerate.
1054 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1055 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1058 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1060 * v850-opc.c (insertion routines): If both alignment and size is
1061 wrong then report this.
1063 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1065 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1066 Only recognize instructions for the current target_processor.
1068 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1070 * d10v-dis.c (PC_MASK): Correct value.
1071 (print_operand): If there's a reloc, don't calculate the
1072 address because they could be in different sections.
1074 start-sanitize-cygnus
1075 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1077 * cgen.sh: Rewrite to be like simulator's version.
1078 * Makefile.am (cgen): Update call to cgen.sh.
1079 * Makefile.in: Regenerate
1082 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1084 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1085 instruction after the 4650's "mul" instruction; nobody's using the
1086 4010 these days. If object files someday indicate which processor
1087 variant they're intended for, we can do a better job at this.
1089 start-sanitize-r5900
1090 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1092 * mips-opc.c (c.lt.s): Add r5900 variant.
1096 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1098 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1099 table provided entry size. Use CGEN_INSN_MNEMONIC.
1100 (cgen_parse_keyword): Rewrite.
1101 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1102 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1103 * cgen-opc.c: Clean up pass over `struct foo' usage.
1104 (cgen_keyword_lookup_value): Handle "" entry.
1105 (cgen_keyword_add): Likewise.
1106 start-sanitize-cygnus
1107 * Makefile.am: Add cgen support.
1108 * Makefile.in: Regenerate.
1109 * configure.in: Add cgen support.
1110 * configure: Regenerate.
1111 * aclocal.m4: Regenerate.
1112 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1115 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1117 * mips-opc.c: Add FP_D to s.d instruction flags.
1119 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1121 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1123 start-sanitize-tic80
1124 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1126 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1127 PC relative offset forms before the 15 bit forms. An assembler command
1128 line option now chooses the default.
1131 start-sanitize-r5900
1132 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1134 * mips-opc.c: Add many missing r5900 instructions.
1138 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1140 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1141 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1144 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1146 * configure: Only build libopcodes shared if --enable-shared's value
1147 was `yes', or was set to `*opcodes*'.
1148 * aclocal.m4: Likewise.
1149 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1150 original source of this bit of code. It's not clear what the best fix
1153 start-sanitize-r5900
1154 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1156 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1158 start-sanitize-tic80
1159 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1161 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1162 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1163 offset forms before the 15 bit forms, to default to the long forms.
1166 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1168 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1170 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1172 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1173 symbol if none is present.
1174 (print_insn_big_arm): Prevent examination of stored symbol if
1177 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1179 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1181 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1183 * disassemble.c: Remove disasm_symaddr() function.
1185 * arm-dis.c: Use info->symbol instead of info->flags to determine
1186 if disassmbly should be in Thumb or Arm mode.
1188 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1190 * arm-dis.c: Add support for disassembling Thumb opcodes.
1191 (print_insn_thumb): New function.
1193 * disassemble.c (disasm_symaddr): New function.
1195 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1196 (thumb_opcodes): Table of Thumb opcodes.
1198 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1200 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1202 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1203 and 'v' as operand types.
1205 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1207 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1208 <olivier.carmona@di.epfl.ch>.
1209 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1210 which has a two word opcode with a one word argument.
1213 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1215 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1216 unsigned, not signed.
1217 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1220 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1222 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1223 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1224 (ftrv): Slay the cut-and-paste monster.
1226 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1228 * d10v-dis.c (print_operand):
1229 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1231 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1233 * d10v-opc.c (OPERAND_FLAG): Split into:
1234 (OPERAND_FFLAG, OPERAND_CFLAG) .
1238 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1240 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1241 field for all INSN_MACRO's.
1242 * mips16-opc.c: same
1244 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1246 * mips-opc.c (sync,cache): These are 3900 insns.
1248 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1250 sh-opc.h (sh_table): Remove ftst/nan.
1252 start-sanitize-vr5400
1253 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1255 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1256 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1258 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1262 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1264 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1265 Add tx49 insns and configury.
1268 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1270 * mips-opc.c (ffc, ffs): Fix mask.
1273 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1275 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1279 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1281 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1282 start-sanitize-vr5400
1283 Added VR5400 instructions.
1284 (N5): New cpu-id macro.
1286 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1288 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1290 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1291 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1293 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1295 * v850-dis.c (disassemble): Replace // with /* ... */
1297 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1299 * sparc-opc.c: Add wr & rd for v9a asr's.
1300 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1301 (v9a_asr_reg_names): New variable.
1302 Patch from David Miller <davem@vger.rutgers.edu>.
1304 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1306 * sparc-opc.c (v9notv9a): New insn type.
1307 (IMPDEP): Move to the end to not conflict with edge8 et al.
1308 Patch from David Miller <davem@vger.rutgers.edu>.
1310 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1312 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1314 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1316 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1318 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1320 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1321 of disassemble_info structure to determine if an overlay address
1322 has a matching symbol in low memory.
1324 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1325 new symbol_at_address_func field in disassemble_info structure.
1327 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1329 * v850-opc.c (extract_d22): Use signed arithmatic.
1331 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1333 * mips-opc.c: Three op mult is not an ISA insn.
1335 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1337 * mips-opc.c: Fix formatting.
1339 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1341 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1342 than assuming that char is signed. Explicitly sign extend 16 bit
1343 values, rather than assuming that short is 16 bits.
1344 (OP_sI, OP_J, OP_DIR): Likewise.
1346 start-sanitize-v850e
1347 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1349 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1353 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1355 * v850-opc.c: Fix typo in comment.
1357 * v850-dis.c (disassemble): Add test of processor type when
1358 determining opcodes.
1360 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1362 * configure.in: Use a diversion to set enable_shared before the
1363 arguments are parsed.
1364 * configure: Rebuild.
1366 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1368 * m68k-opc.c (TBL1): Use ! rather than `.
1369 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1371 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1373 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1375 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1377 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1380 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1381 * aclocal.m4: Rebuild with new libtool.
1382 * configure: Rebuild.
1384 start-sanitize-v850e
1385 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1387 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1390 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1392 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1394 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1396 * v850-opc.c (v850_opcodes): Further rearrangements.
1399 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1401 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1404 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1406 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1409 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1411 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1413 * mips16-opc.c: Added mips16 sdbbp.
1416 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1418 * v850-opc.c: Initialise processors field of v850_opcode structure.
1421 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1423 Merge changes from Martin Hunt:
1425 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1427 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1428 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1429 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1431 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1433 * d30v-dis.c (print_insn): First operand of d*i (delayed
1434 branch) instructions is relative.
1436 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1437 (d30v_operand_table): Add IMM6S3 type.
1438 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1440 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1441 and cmp instructions.
1443 * d30v-opc.c: Correct entries for repeat*, and sat*.
1444 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1445 types. Correct several formats.
1447 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1449 * d30v-opc.c (pre_defined_registers): Change control registers.
1451 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1452 SHORT_C2. Manual was incorrect.
1454 * d30v-dis.c (lookup_opcode): Return value now indicates
1455 if an opcode has a short and a long form. Used for deciding
1456 to append a ".s" or ".l".
1457 (print_insn): Append a ".s" to an instruction if it is
1458 the short form and ".l" if it is a long form. Do not append
1459 anything if the instruction has only one possible size.
1461 * d30v-opc.c: Change mulx2h to require an even register.
1462 New form: SHORT_A2; a SHORT_A form that needs an even
1463 register as the first operand.
1465 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1466 instruction was not being disassembled if there were an odd
1467 number of instructions.
1469 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1472 start-sanitize-v850e
1473 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1475 * v850-dis.c (disassemble): Improved display of register lists.
1478 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1480 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1481 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1482 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1483 fandnot1s, fandnot2s.
1485 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1487 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1489 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1491 * cgen-asm.c (cgen_parse_address): New argument resultp.
1492 All callers updated.
1493 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1495 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1497 * mn10200-dis.c (disassemble): PC relative instructions are
1498 relative to the next instruction, not the current instruction.
1500 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1502 * v850-dis.c (disassemble): Only signed extend values that are not
1503 returned by extract functions.
1504 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1506 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1508 * v850-opc.c: Update comments. Remove use of
1509 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1511 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1513 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1515 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1517 * configure: Rebuilt with latest devo autoconf for NT support.
1519 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1521 * v850-dis.c (disassemble): Use curly brace syntax for register
1524 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1525 where r0 is being used as a destination register.
1527 start-sanitize-v850e
1528 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1530 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1533 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1535 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1536 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1537 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1538 Add insns to access SGR and DBR.
1539 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1541 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1543 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1545 start-sanitize-v850e
1546 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1548 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1549 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1552 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1554 * configure (cgen_files): Add support for v850e target.
1555 * configure.in (cgen_files): Add support for v850e target.
1557 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1559 * configure (cgen_files): Add support for v850ea target.
1560 * configure.in (cgen_files): Add support for v850ea target.
1563 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1565 * configure.in (bfd_arc_arch): Add.
1566 * configure: Rebuild.
1567 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1568 * Makefile.in: Rebuild.
1569 * arc-dis.c, arc-opc.c: New files.
1570 * disassemble.c (ARCH_all): Define ARCH_arc.
1571 (disassembler): Add ARC support.
1573 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1575 start-sanitize-v850e
1576 * v850-dis.c (disassemble): Add support for v850EA instructions.
1578 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1579 (v850_opcodes): Add v850EA instructions.
1581 * v850-dis.c (disassemble): Add support for v850E instructions.
1583 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1584 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1585 insert_spe, extract_spe): New Functions.
1586 (v850_opcodes): Add v850E instructions.
1589 * v850-opc.c: Reorganised and re-layed out to improve readability
1592 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1594 * configure: Rebuild with autoconf 2.12.1.
1596 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1598 * aclocal.m4, configure: Rebuild with new automake patches.
1600 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1602 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1603 * acinclude.m4: Just include acinclude.m4 from BFD.
1604 * aclocal.m4, configure: Rebuild.
1606 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1608 * Makefile.am: New file, based on old Makefile.in.
1609 * acconfig.h: New file.
1610 * acinclude.m4: New file.
1611 * stamp-h.in: New file.
1612 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1613 Removed shared library handling; now handled by libtool. Replace
1614 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1615 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1616 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1617 handling in AC_OUTPUT.
1618 * dep-in.sed: Change .o to .lo.
1619 * Makefile.in: Now built with automake.
1620 * aclocal.m4: Now built with aclocal.
1621 * config.in, configure: Rebuild.
1623 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1625 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1627 start-sanitize-r5900
1628 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1630 * mips-opc.c: Fix coding of mtsa.
1633 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1635 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1637 * sparc-dis.c (sorted_opcodes): New static local.
1638 (struct opcode_hash): `opcode' is pointer to const element.
1639 (build_hash): First arg is now table of sorted pointers.
1640 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1641 (compare_opcodes): Update.
1643 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1645 * cgen-opc.c: #include <ctype.h>.
1646 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1647 Handle case insensitive hashing.
1648 (hash_keyword_value): Change type of `value' to unsigned int.
1650 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1652 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1653 precision FP, mark it as such. Likewise for double precision
1654 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1656 start-sanitize-r5900
1657 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1660 start-sanitize-r5900
1661 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1663 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1664 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1667 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1669 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1671 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1672 nesting depth when all the macros are expanded.
1674 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1676 * sparc-opc.c: The fcmp v9a instructions take an integer register
1677 as a destination, not a floating point register. From Christian
1678 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1680 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1682 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1683 syntax. From Roman Hodek
1684 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1686 * i386-dis.c (twobyte_has_modrm): Fix pand.
1688 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1690 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1692 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1694 * arm-dis.c: Add prototypes for arm_decode_shift and
1697 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1699 * mips-opc.c: Add r3900 insns.
1701 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1703 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1704 print delay slot instructions on the same line. When using a PC
1705 relative load, add a comment with the value being loaded if it can
1708 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1710 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1711 to pushS/popS for segment regs and byte constant so that
1712 pushw/popw printed when in 16 bit data mode.
1714 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1715 print cbtw, cwtd in 16 bit data mode.
1716 * i386-dis.c (putop): extra case W to support above.
1718 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1719 address size prefix in 16 bit address mode.
1721 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1723 * sh-dis.c: Reindent. Rename local variable fprintf to
1726 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1728 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1730 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1732 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1734 * mips16-opc.c (mip16_opcodes): same.
1736 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1738 * m68k-opc.c (moveb): Change $d to %d.
1740 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1743 (twobyte_has_modrm): Likewise.
1745 (OP_MMX, OP_EM, OP_MS): New static functions.
1747 * i386-dis.c: Revert patch of April 4. The output now matches
1750 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1752 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1755 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1757 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1759 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1761 * Makefile.in (install): Depend upon installdirs.
1762 (installdirs): New target.
1764 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1766 From Thomas Graichen <graichen@rzpd.de>:
1767 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1768 * configure: Rebuild.
1770 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1772 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1773 Delete string{,s}.h support.
1775 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1777 * cgen-asm.c (cgen_parse_operand_fn): New global.
1778 (cgen_parse_{{,un}signed_integer,address}): Update call to
1779 cgen_parse_operand_fn.
1780 (cgen_init_parse_operand): New function.
1781 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1782 from cgen_asm_init_parse.
1783 (m32r_cgen_assemble_insn): New operand `errmsg'.
1784 Delete call to as_bad, return error message to caller.
1785 (m32r_cgen_asm_hash_keywords): #if 0 out.
1787 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1789 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1791 [case 'J']: Fix typo in register name.
1793 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1795 * configure.in: Substitute SHLIB_LIBS.
1796 * configure: Rebuild.
1797 * Makefile.in (SHLIB_LIBS): New variable.
1798 ($(SHLIB)): Use $(SHLIB_LIBS).
1800 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1802 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1804 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1806 * disassemble.c (disassembler): Handle m32r.
1808 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1810 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1811 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1812 * Makefile.in (CFILES): Add them.
1813 (ALL_MACHINES): Add them.
1814 (dependencies): Regenerate.
1815 * configure.in (cgen_files): New variable.
1816 (bfd_m32r_arch): Add entry.
1817 * configure: Regenerate.
1819 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1821 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1822 * configure: Rebuild.
1824 * Makefile.in: Rebuild dependencies.
1826 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1828 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1831 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1833 * Branched binutils 2.8.
1835 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1837 * m10200-dis.c: Rename from mn10200-dis.c.
1838 * m10200-opc.c: Rename from mn10200-opc.c.
1839 * m10300-dis.c: Rename from mn10300-dis.c
1840 * m10300-opc.c: Rename from mn10300-opc.c.
1841 * Makefile.in: Update accordingly.
1843 * mips16-opc.c: Add mul and dmul macros.
1845 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1847 * makefile.vms: Update CFLAGS, add clean target.
1849 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1851 * mips-opc.c: Add "wait". From Ralf Baechle
1852 <ralf@gnu.ai.mit.edu>.
1854 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1855 * configure, config.in: Rebuild.
1856 * sysdep.h: Include <stdlib.h> if it exists.
1857 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1859 * Makefile.in: Rebuild dependencies.
1861 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1863 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1864 Andrew Bray <andy@madhouse.demon.co.uk>.
1866 * mips-opc.c: Add cast when setting mips_opcodes.
1868 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1870 * v850-dis.c (disassemble): Fix sign extension problem.
1871 * v850-opc.c (extract_d*): Fix sign extension problems to make
1872 disassembly calculate branch offsets correctly.
1874 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1876 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1878 * mips-opc.c: Add dctr and dctw.
1881 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1883 * d30v-dis.c (print_insn): Change the way signed constants
1886 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1888 * Makefile.in (BFD_H): New variable.
1889 (HFILES): New variable.
1890 (CFILES): Add all C files.
1891 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1892 Delete old dependencies, and build new ones.
1893 * dep-in.sed: New file.
1895 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1897 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1899 start-sanitize-coldfire
1900 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1902 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1905 end-sanitize-coldfire
1906 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1908 * mn10200-opc.c: Change "trap" to "syscall".
1909 * mn10300-opc.c: Add new "syscall" instruction.
1911 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1913 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1914 mulul insns on the coldfire.
1916 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1918 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1919 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1920 (print_insn_little_arm): Likewise.
1922 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1924 Based on patches from H.J. Lu <hjl@lucon.org>:
1925 * i386-dis.c (fetch_data): Add prototype.
1926 * m68k-dis.c (fetch_data): Add prototype.
1927 (dummy_print_address): Add prototype. Make static.
1928 * ppc-opc.c (valid_bo): Add prototype.
1929 * sparc-dis.c (build_hash_table): Add prototype.
1930 (is_delayed_branch, compute_arch_mask): Add prototypes.
1931 (print_insn_sparc): Make several local variables const.
1932 (compare_opcodes): Change arguments to const PTR. Add prototype.
1933 * sparc-opc.c (arg): Change name field to be const.
1934 (lookup_name, lookup_value): Add prototypes. Change table and
1935 name parameters to be const.
1936 (sparc_encode_asi): Change name parameter to be const.
1937 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1938 (sparc_encode_sparclet_cpreg): Likewise.
1939 (sparc_decode_asi): Change return type to be const.
1940 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1941 (sparc_decode_sparclet_cpreg): Likewise.
1943 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1945 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1946 Solaris doesn't like the combined options, and the -f is
1948 (stamp-tshlink, install): Likewise.
1950 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1952 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1955 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1957 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1959 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1961 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1964 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1966 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1968 start-sanitize-tic80
1969 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1971 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1973 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1975 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1978 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1980 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1981 floatformat_to_double to make portable.
1982 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1985 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1987 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1988 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1990 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1992 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1993 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1995 start-sanitize-tic80
1996 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1998 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1999 (OFF_SL_BR_SCALED): ... to this, and added the flag
2000 TIC80_OPERAND_BASEREL to the flags word.
2001 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2005 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2007 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2008 Change mips_opcodes from const array to a pointer,
2009 and change bfd_mips_num_opcodes from const int to int,
2010 so that we can increase the size of the mips opcodes table
2013 start-sanitize-tic80
2014 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2016 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2017 store BITNUM values in the table in one's complement form
2018 to match behavior when assembler is given a raw numeric
2019 value for a BITNUM operand.
2020 * tic80-dis.c (print_operand_bitnum): Ditto.
2024 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2026 * d30v-opc.c: Removed references to FLAG_X.
2029 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2031 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2034 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2036 * Makefile.in: Added d30v object files.
2037 * configure: (bfd_d30v_arch) Rebuilt.
2038 * configure.in: (bfd_d30v_arch) Added new case.
2039 * d30v-dis.c: New file.
2040 * d30v-opc.c: New file.
2041 * disassemble.c (disassembler) Add entry for d30v.
2044 start-sanitize-tic80
2045 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2047 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2048 representations for the floating point BITNUM values.
2050 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2052 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2053 in the table in one's complement form, as they appear in the
2055 (tic80_symbol_to_value): Use macros to access predefined
2057 (tic80_value_to_symbol): Ditto.
2058 (tic80_next_predefined_symbol): New function.
2059 * tic80-dis.c (print_operand_bitnum): Remove code that did
2060 one's complement for BITNUM values.
2063 start-sanitize-r5900
2064 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2066 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2069 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2071 * makefile.vms: Remove 8 bit characters. Update to latest
2074 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2076 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2078 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2080 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2081 (IMM24_PCREL): Likewise.
2083 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2085 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2086 address for an extended PC relative instruction that is not a
2089 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2091 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2094 start-sanitize-tic80
2095 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2097 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2098 (tic80_opcodes): Sort entries so that long immediate forms
2099 come after short immediate forms, making it easier for
2100 assembler to select the right one for a given operand.
2103 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2105 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2107 (print_insn_mips16): Likewise.
2109 start-sanitize-r5900
2110 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2112 * mips-opc.c: add r5900.
2115 start-sanitize-tic80
2116 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2118 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2119 a symbol class that restricts translation to just that
2120 class (general register, condition code, etc).
2122 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2124 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2125 and REG_DEST_E for register operands that have to be
2126 an even numbered register. Add REG_FPA for operands that
2127 are one of the floating point accumulator registers.
2128 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2129 (tic80_opcodes): Change entries that need even numbered
2130 register operands to use the new operand table entries.
2131 Add "or" entries that are identical to "or.tt" entries.
2134 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2136 * mips16-opc.c: Add new cases of exit instruction for
2138 * mips-dis.c (print_mips16_insn_arg): Display floating point
2139 registers in operands of exit instruction. Print `$' before
2140 register names in operands of entry and exit instructions.
2142 start-sanitize-tic80
2143 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2145 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2146 pairs for all predefined symbols recognized by the assembler.
2147 Also used by the disassembling routines.
2148 (tic80_symbol_to_value): New function.
2149 (tic80_value_to_symbol): New function.
2150 * tic80-dis.c (print_operand_control_register,
2151 print_operand_condition_code, print_operand_bitnum):
2152 Remove private tables and use tic80_value_to_symbol function.
2155 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2157 * d10v-dis.c (print_operand): Change address printing
2158 to correctly handle PC wrapping. Fixes PR11490.
2160 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2162 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2165 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2167 * mips-dis.c (print_insn_mips16): Set insn_info information.
2168 (print_mips16_insn_arg): Likewise.
2170 * mips-dis.c (print_insn_mips16): Better handling of an extend
2171 opcode followed by an instruction which can not be extended.
2173 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2175 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2176 coldfire moveb instruction to not allow an address register as
2177 destination. Although the documentation does not indicate that
2178 this is invalid, experiments uncovered unexpected behavior.
2179 Added a comment explaining the situation. Thanks to Andreas
2180 Schwab for pointing this out to me.
2182 start-sanitize-tic80
2183 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2185 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2186 entries are presorted so that entries with the same mnemonic are
2187 adjacent to each other in the table. Sort the entries for each
2188 instruction so that this is true.
2191 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2193 * m68k-dis.c: Include <libiberty.h>.
2194 (print_insn_m68k): Sort the opcode table on the most significant
2195 nibble of the opcode.
2197 start-sanitize-tic80
2198 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2200 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2201 "vsub", "vst", "xnor", and "xor" instructions.
2202 (V_a1): Renamed from V_a, msb of accumulator reg number.
2203 (V_a0): Add macro, lsb of accumulator reg number.
2205 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2207 * tic80-dis.c (print_insn_tic80): Broke excessively long
2208 function up into several smaller ones and arranged for
2209 the instruction printing function to be callable recursively
2210 to print vector instructions that have both a load and a
2211 math instruction packed into a single opcode.
2212 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2213 to explain why it comes after the other vector opcodes.
2216 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2218 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2219 move insns to handle immediate operands.
2221 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2223 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2224 fix operand mask in the "moveml" entries for the coldfire.
2226 start-sanitize-tic80
2227 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2229 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2230 New macros for building vector instruction opcodes.
2231 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2232 FMT_LI, which were unused. The field is now a flags field.
2233 Remove some opcodes that are possible, but illegal, such
2234 as long immediate instructions with doubles for immediate
2235 values. Add "vadd" and "vld" instructions.
2237 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2239 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2240 the order more logical. Move the shift alias instructions ("rotl",
2241 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2242 interspersed with the regular sr.x and sl.x instructions. Add
2243 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2244 "sub", "subu", "swcr", and "trap".
2246 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2248 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2249 (OFF_SL_PC): Renamed from OFF_SL.
2250 (OFF_SS_BR): New operand type for base relative operand.
2251 (OFF_SL_BR): New operand type for base relative operand.
2252 (REG_BASE): New operand type for base register operand.
2253 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2254 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2255 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2257 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2258 10 char field, padded with spaces on rhs, rather than a string
2259 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2260 than old TIC80_OPERAND_RELATIVE. Add support for new
2261 TIC80_OPERAND_BASEREL flag bit.
2263 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2265 * tic80-dis.c (print_insn_tic80): Print floating point operands
2267 * tic80-opc.c (SPFI): Add single precision floating point
2268 immediate operand type.
2269 (ROTATE): Add rotate operand type for shifts.
2270 (ENDMASK): Add for shifts.
2271 (n): Macro for the 'n' bit.
2272 (i): Macro for the 'i' bit.
2273 (PD): Macro for the 'PD' field.
2274 (P2): Macro for the 'P2' field.
2275 (P1): Macro for the 'P1' field.
2276 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2280 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2282 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2283 adding in current address for pc-relative operands.
2285 start-sanitize-tic80
2286 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2288 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2289 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2290 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2291 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2292 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2293 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2294 (REG_SCALED, LSI_SCALED): New operand types.
2295 (E): New macro for 'E' bit at bit 27.
2296 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2297 opcodes, including the various size flavors (b,h,w,d) for
2298 the direct load and store instructions.
2300 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2302 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2304 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2305 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2306 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2307 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2308 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2309 masks with "MASK_* & ~M_*" to get the M bit reset.
2310 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2312 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2314 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2315 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2316 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2318 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2319 CC, SICR, and LICR table entries.
2320 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2321 "bcnd", and "brcr" opcodes.
2324 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2326 * ppc-opc.c (powerpc_operands): Make comment match the
2327 actual fields (no shift field).
2328 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2329 start-sanitize-tic80
2330 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2331 partial implementation, work in progress.
2332 * tic80-opc.c (tic80_operands): Begin construction operands table.
2333 (tic80_opcodes): Continue populating opcodes table and start
2334 filling in the operand indices.
2335 (tic80_num_opcodes): Add this.
2338 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2340 * m68k-opc.c: Add #B case for moveq.
2342 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2344 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2345 before they are used.
2347 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2349 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2350 for "breakpoint" instruction.
2352 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2354 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2355 (dep): Use ALL_CFLAGS rather than CFLAGS.
2357 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2359 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2362 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2364 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2365 start-sanitize-tic80
2366 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2369 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2371 * mips16-opc.c: Add "abs".
2373 start-sanitize-tic80
2374 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2376 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2377 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2378 (disassembler): Add bfd_arch_tic80 support to set disassemble
2379 to print_insn_tic80.
2380 * tic80-dis.c (print_insn_tic80): Add stub.
2382 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2384 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2385 * configure: Regenerate with autoconf.
2386 * tic80-dis.c: Add file.
2387 * tic80-opc.c: Add file.
2390 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2392 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2394 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2396 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2397 (mn10200_opcodes): Use it for some logicals and btst insns.
2398 Add "break" and "trap" instructions.
2400 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2402 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2404 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2406 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2407 relative load or add now depends upon whether the instruction is
2410 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2412 * mn10200-dis.c: Finish writing disassembler.
2413 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2414 Fix mask for "jmp (an)".
2416 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2417 handle endianness issues for mn10300.
2419 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2421 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2423 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2424 instruction. Fix opcode field for "movb (imm24),dn".
2426 * mn10200-opc.c (mn10200_operands): Fix insertion position
2429 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2431 * mn10200-opc.c: Create mn10200 opcode table.
2432 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2433 but moving along nicely.
2435 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2437 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2439 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2441 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2442 specifiers for fmovem* instructions.
2444 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2446 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2448 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2450 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2453 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2455 * mn10300-opc.c: Add some comments explaining the various
2458 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2460 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2462 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2465 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2466 operand specifiers in fmovm* instructions.
2468 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2470 * ppc-opc.c (insert_li): Give an error if the offset has the two
2471 least significant bits set.
2473 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2475 * mips-dis.c (print_insn_mips16): Separate the instruction from
2476 the arguments with a tab, not a space.
2478 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2480 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2483 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2486 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2488 * configure: Rebuild with autoconf 2.12.
2490 Add support for mips16 (16 bit MIPS implementation):
2491 * mips16-opc.c: New file.
2492 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2493 (mips16_reg_names): New static array.
2494 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2495 after seeing a 16 bit symbol.
2496 (print_insn_little_mips): Likewise.
2497 (print_insn_mips16): New static function.
2498 (print_mips16_insn_arg): New static function.
2499 * mips-opc.c: Add jalx instruction.
2500 * Makefile.in (mips16-opc.o): New target.
2501 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2502 * configure: Rebuild.
2504 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2506 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2507 operand specifiers in *save, *restore and movem* instructions.
2509 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2512 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2513 register operands for immediate arithmetic, not, neg, negx, and
2514 set according to condition instructions.
2516 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2517 specifier of the effective-address operand in immediate forms of
2518 arithmetic instructions. The specifier for the immediate operand
2519 notes how and where the constant will be stored.
2521 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2523 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2526 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2529 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2531 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2533 * mn10300-dis.c (disassemble): Handle register lists.
2535 * mn10300-opc.c: Fix handling of register list operand for
2536 "call", "ret", and "rets" instructions.
2538 * mn10300-dis.c (disassemble): Print PC-relative and memory
2539 addresses symbolically if possible.
2540 * mn10300-opc.c: Distinguish between absolute memory addresses,
2541 pc-relative offsets & random immediates.
2543 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2545 (disassemble): Handle SPLIT and EXTENDED operands.
2547 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2549 * mn10300-dis.c: Rough cut at printing some operands.
2551 * mn10300-dis.c: Start working on disassembler support.
2552 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2554 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2556 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2558 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2560 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2562 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2564 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2565 register argument is calls and jmp instructions.
2567 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2569 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2570 getx operand. Fix opcode for mulqu imm,dn.
2572 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2574 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2575 in MN10300_OPERAND_SPLIT operands for how many bits
2576 appear in the basic insn word. Add IMM32_HIGH24,
2577 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2578 (mn10300_opcodes): Use new operands as needed.
2580 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2581 for bset, bclr, btst instructions.
2582 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2584 * mn10300-opc.c (mn10300_operands): Remove many redundant
2585 operands. Update opcode table as appropriate.
2586 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2587 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2589 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2591 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2592 operands (for indexed load/stores). Fix bitpos for DI
2593 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2594 few instructions that insert immediates/displacements in the
2595 middle of the instruction. Add IMM8E for 8 bit immediate in
2596 the extended part of an instruction.
2597 (mn10300_operands): Use new opcodes as appropriate.
2599 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2601 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2602 sequential so the assembler never parallelizes it with
2605 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2607 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2608 a data/address register that appears in register field 0
2609 and register field 1.
2610 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2612 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2614 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2615 standard disassembly.
2617 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2618 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2619 Recategorize PALcode instructions.
2621 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2623 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2625 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2627 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2628 there are no operand types.
2630 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2632 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2634 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2636 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2638 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2640 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2642 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2643 and sst.w instructions.
2645 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2648 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2650 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2653 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2655 * ppc-opc.c (PPCPWR2): Define.
2656 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2659 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2661 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2662 field for movhu instruction.
2664 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2665 cast value to "long" not "signed long" to keep hpux10
2668 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2670 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2673 * mn10300-opc.c (FMT*): Remove definitions.
2675 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2676 for shift-by-register opcodes.
2678 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2679 into [AD][MN][01] for encoding the position of the register
2682 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2684 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2685 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2687 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2689 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2690 Fix various typos. Add "PAREN" operand.
2691 (MEM, MEM2): Define.
2692 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2693 operands. Fix several typos.
2695 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2698 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2700 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2701 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2703 (mn10300_opcodes): Break opcode format out into its own field.
2704 Update many operand fields to deal with signed vs unsigned
2705 issues. Fix one or two typos in the "mov" instruction
2706 opcode, mask and/or operand fields.
2708 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2710 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2711 m68851 wasn't reset.
2713 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2715 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2716 all opcodes. Very rough cut at operands for all opcodes.
2718 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2721 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2723 * mn10200-opc.c, mn10300-opc.c: New files.
2724 * mn10200-dis.c, mn10300-dis.c: New files.
2725 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2726 * disassemble.c: Break mn10x00 support into 10200 and 10300
2728 * configure.in: Likewise.
2729 * configure: Rebuilt.
2731 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2733 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2735 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2737 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2739 * disassemble (ARCH_mn10x00): Define.
2740 (disassembler): Handle bfd_arch_mn10x00.
2741 * configure.in: Recognize bfd_mn10x00_arch.
2742 * configure: Rebuilt.
2744 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2747 accordingly. Don't declare functions using op_rtn.
2749 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2751 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2752 params to be more standard.
2753 * (disassemble): Print absolute addresses and symbolic names for
2754 branch and jump targets.
2755 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2757 * (v850_opcodes): Add breakpoint insn.
2759 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2761 * m68k-opc.c: Move the fmovemx data register cases before the
2762 other cases, so that they get recognized before the data register
2763 does gets treated as a degenerate register list.
2765 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2767 * mips-opc.c: Add a case for "div" and "divu" with two registers
2768 and a destination of $0.
2770 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2772 * mips-dis.c (print_insn_arg): Add prototype.
2773 (_print_insn_mips): Ditto.
2775 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2777 * mips-dis.c (print_insn_arg): Print condition code registers as
2780 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2782 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2784 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2786 * v850-dis.c (disassemble): Make static. Provide prototype.
2788 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2790 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2793 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2795 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2796 ']' characters into the output stream.
2797 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2798 Add "memop" field to all opcodes (for the disassembler).
2799 Reorder opcodes so that "nop" comes before "mov" and "jr"
2800 comes before "jarl".
2802 * v850-dis.c (print_insn_v850): Fix typo in last change.
2804 * v850-dis.c (print_insn_v850): Properly handle disassembling
2805 a two byte insn at the end of a memory region when the memory
2806 region's size is only two byte aligned.
2808 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2810 * v850-dis.c (v850_reg_names): Define.
2811 (v850_sreg_names, v850_cc_names): Likewise.
2812 (disassemble): Very rough cut at printing operands (unformatted).
2814 * v850-opc.c (BOP_MASK): Fix.
2815 (v850_opcodes): Fix mask for jarl and jr.
2817 * v850-dis.c: New file. Skeleton for disassembler support.
2818 * Makefile.in Remove v850 references, they're not needed here.
2819 * configure.in: Add v850-dis.o when building v850 toolchains.
2820 * configure: Rebuilt.
2821 * disassemble.c (disassembler): Call v850 disassembler.
2823 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2824 (insert_d8_6, extract_d8_6): New functions.
2825 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2826 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2828 (IF4A, IF4B): Use "D7" instead of "D7S".
2829 (IF4C, IF4D): Use "D8_7" instead of "D8".
2830 (IF4E, IF4F): New. Use "D8_6".
2831 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2832 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2834 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2835 (v850_operands): Change D16 to D16_15, use special insert/extract
2836 routines. New new D16 that uses the generic insert/extract code.
2837 (IF7A, IF7B): Use D16_15.
2838 (IF7C, IF7D): New. Use D16.
2839 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2841 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2842 message. Issue an error if the branch offset is odd.
2844 * v850-opc.c: Add notes about needing special insert/extract
2845 for all the load/store insns, except "ld.b" and "st.b".
2847 * v850-opc.c (insert_d22, extract_d22): New functions.
2848 (v850_operands): Use insert_d22 and extract_d22 for
2850 (insert_d9): Fix range check.
2852 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2854 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2855 and set bits field to D9 and D22 operands.
2857 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2859 * v850-opc.c (v850_operands): Define SR2 operand.
2860 (v850_opcodes): "ldsr" uses R1,SR2.
2862 * v850-opc.c (v850_opcodes): Fix opcode specs for
2863 sld.w, sst.b, sst.h, sst.w, and nop.
2865 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2867 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2868 end of the opcode table.
2870 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2872 * d10v-opc.c (pre_defined_registers): Added register pairs,
2873 "r0-r1", "r2-r3", etc.
2875 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2877 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2878 Create I16U for an unsigned 16bit mmediate operand.
2879 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2881 * v850-opc.c (v850_operands): Define EP operand.
2882 (IF4A, IF4B, IF4C, IF4D): Use EP.
2884 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2885 with immediate operand, "movhi". Tweak "ldsr".
2887 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2888 correct. Get sld.[bhw] and sst.[bhw] closer.
2890 * v850-opc.c (v850_operands): "not" is a two byte insn
2892 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2894 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2896 * v850-opc.c (two): Get order of words correct.
2898 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2900 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2901 register source and destination operands.
2902 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2904 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2905 same thinko in "trap" opcode.
2907 * v850-opc.c (v850_opcodes): Add initializer for size field
2910 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2911 Add D8 for 8-bit unsigned field in short load/store insns.
2912 (IF4A, IF4D): These both need two registers.
2913 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2914 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2915 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2916 for "ldsr" and "stsr".
2917 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2920 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2921 short store word (sst.w).
2923 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2925 * v850-opc.c (v850_operands): Added insert and extract fields,
2926 pointers to functions that handle unusual operand encodings.
2928 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2930 * v850-opc.c (v850_opcodes): Enable "trap".
2932 * v850-opc.c (v850_opcodes): Fix order of displacement
2933 and register for "set1", "clr1", "not1", and "tst1".
2935 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2937 * v850-opc.c (v850_operands): Add "B3" support.
2938 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2941 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2943 * v850-opc.c: Close unterminated comment.
2945 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2947 * v850-opc.c (v850_operands): Add flags field.
2948 (v850_opcodes): add move opcodes.
2950 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2952 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2953 * configure: (bfd_v850v_arch) Add new case.
2954 * configure.in: (bfd_v850_arch) Add new case.
2955 * v850-opc.c: New file.
2957 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2959 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2961 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2963 * d10v-opc.c: Add additional information to the opcode
2964 table to help determinine which instructions can be done
2967 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2969 * mpw-make.sed: Update editing of include pathnames to be
2972 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2974 * arm-opc.h: Added "bx" instruction definition.
2976 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2978 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2980 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2982 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2984 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2986 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2988 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2990 * makefile.vms: Update for alpha-opc changes.
2992 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2994 * i386-dis.c (print_insn_i386): Actually return the correct value.
2995 (ONE, OP_ONE): #ifdef out; not used.
2997 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2999 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3000 Changed subi operand type to treat 0 as 16.
3002 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3007 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3009 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3010 memory transfer instructions. Add new format string entries %h and %s.
3011 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3014 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3016 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3017 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3019 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3021 * alpha-dis.c (print_insn_alpha_osf): Remove.
3022 (print_insn_alpha_vms): Remove.
3023 (print_insn_alpha): Make globally visible. Chose the register
3024 names based on info->flavour.
3025 * disassemble.c: Always return print_insn_alpha for the alpha.
3027 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3029 * d10v-dis.c (dis_long): Handle unknown opcodes.
3031 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3033 * d10v-opc.c: Changes to support signed and unsigned numbers.
3034 All instructions with the same name that have long and short forms
3035 now end in ".l" or ".s". Divs added.
3036 * d10v-dis.c: Changes to support signed and unsigned numbers.
3038 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3040 * d10v-dis.c: Change all functions to use info->print_address_func.
3042 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3044 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3045 move ccr/sr insns more strict so that the disassembler only
3046 selects them when the addressing mode is data register.
3048 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3049 * d10v-opc.c (pre_defined_registers): Declare.
3050 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3051 to pick a better name for the registers.
3053 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3055 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3056 operands for fexpand and fpmerge. From Christian Kuehnke
3057 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3059 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3061 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3062 print routine. Take new regnames and cpumask arguments.
3063 Kill the environment variable nonsense.
3064 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3065 (print_insn_alpha_vms): New function. Do VMS style regnames.
3066 * disassemble.c (disassembler): Test bfd flavour to pick
3067 between OSF and VMS routines. Default to OSF.
3069 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3071 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3072 * configure: Rebuild.
3073 * Makefile.in (install): Use @INSTALL_SHLIB@.
3075 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3077 * configure: (bfd_d10v_arch) Add new case.
3078 * configure.in: (bfd_d10v_arch) Add new case.
3079 * d10v-dis.c: New file.
3080 * d10v-opc.c: New file.
3081 * disassemble.c (disassembler) Add entry for d10v.
3083 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3085 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3086 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3088 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3090 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3091 distinguish between variants of the instruction set.
3092 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3093 distinguish between variants of the instruction set.
3095 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3097 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3098 the 8086 instruction set.
3099 * i386-dis.c: General cleanups. Make most things static. Add
3100 prototypes. Get rid of static variables aflags and dflags. Pass
3101 them as args (to almost everything).
3103 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3105 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3107 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3109 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3110 if the next arg is marked with SRC_IN_DST. Gross.
3112 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3113 we're looking for and find EXR.
3115 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3116 if we're looking for KBIT and we don't find it.
3118 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3121 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3122 3bit immediate operands.
3124 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3126 * Released binutils 2.7.
3128 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3129 <kkaempf@progis.ac-net.de>.
3131 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3133 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3135 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3137 * sparc-dis.c (print_insn_sparclite): New routine to print
3138 sparclite instructions.
3140 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3142 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3144 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3146 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3147 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3148 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3150 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3152 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3153 Use autoconf-set values.
3154 (docdir, oldincludedir): Removed.
3155 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3157 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3159 * alpha-opc.c: New file.
3160 * alpha-opc.h: Remove.
3161 * alpha-dis.c: Complete rewrite to use new opcode table.
3162 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3163 * configure: Rebuild with autoconf 2.10.
3164 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3165 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3167 (alpha-opc.o): New target.
3169 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3171 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3172 Set imm_added_to_rs1 even if the source and destination register
3175 * sparc-opc.c: Add some two operand forms of the wr instruction.
3177 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3179 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3182 * disassemble.c (disassembler): Handle H8/S.
3183 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3185 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3187 * sparc-opc.c: Add beq/teq as aliases for be/te.
3189 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3190 <sergei@msil.sps.mot.com>.
3192 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3194 * makefile.vms: New file.
3196 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3198 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3200 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3203 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3205 * i386-dis.c (OP_OFF): Call append_prefix.
3207 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3209 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3210 unsigned long to silence a warning from the Solaris PowerPC
3213 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3215 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3217 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3219 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3221 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3222 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3223 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3224 cpush, cpusha, cpull sparclet insns.
3226 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3228 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3230 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3232 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3233 Set F_FLOAT on other floating point instructions.
3235 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3237 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3239 (powerpc_opcodes): Add 860/821 specific SPRs.
3241 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3243 * configure.in: Permit --enable-shared to specify a list of
3244 directories. Set and substitute BFD_PICLIST.
3245 * configure: Rebuild.
3246 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3247 uses. Set to @BFD_PICLIST@.
3249 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3251 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3252 not "abs", which may be needed for the absolute in something
3253 like btst #0,@10:8. Print L_3 immediates separately from other
3254 immediates. Change ABSMOV reference to ABS8MEM.
3256 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3258 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3259 (current_arch_mask): New static global.
3260 (compute_arch_mask): New static function.
3261 (print_insn_sparc): Delete sparc_v9_p. New static local
3262 current_mach. Resort opcode table if current_mach changes.
3263 Generalize "insn not supported" test.
3264 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3265 Delete test for v9/!v9.
3266 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3268 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3269 (brfcx): Renamed to FBRX.
3270 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3271 coprocessor mnemonics are not supported on the sparclet).
3272 (condf): Renamed to CONDF.
3273 (SLCBCC2): Delete F_ALIAS flag.
3275 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3277 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3278 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3280 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3282 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3283 that the shared library version number is set correctly.
3285 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3287 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3288 Miles Bader <miles@gnu.ai.mit.edu>.
3289 * configure: Rebuild.
3291 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3293 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3296 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3298 * configure: Rebuild with autoconf 2.8.
3300 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3302 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3303 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3305 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3307 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3308 since they appear as targets in Makefile.in.
3309 * configure: Rebuild.
3311 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3313 * mpw-make.sed: Edit out shared library support bits.
3315 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3317 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3318 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3319 (sparc_opcodes): Add sparclet insns.
3320 (sparclet_cpreg_table): New static local.
3321 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3322 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3324 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3326 * i386-dis.c (index16): New static variable.
3327 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3329 (OP_indirE): Return result of OP_E.
3330 (OP_E): Check for 16 bit addressing mode, and disassemble
3331 correctly. Optimised 32 bit case a little. Don't print
3332 "(base,index,scale)" when sib specifies only an offset.
3334 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3336 * configure.in: Set and substitute SHLIB_DEP.
3337 * configure: Rebuild.
3338 * Makefile.in (SHLIB_DEP): New variable.
3339 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3340 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3341 COMMON_SHLIB, add them to piclist with appropriate modifications.
3342 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3343 here: just use piclist.
3345 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3347 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3348 (print_insn_sparc): Rewrite v9/not-v9 tests.
3349 (compare_opcodes): Likewise.
3350 * sparc-opc.c (MASK_<ARCH>): Define.
3351 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3352 (sparclet,v6notv9): Define.
3353 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3354 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3356 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3358 * configure.in: Call AC_PROG_CC before configure.host.
3359 * configure: Rebuild.
3361 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3363 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3365 * i386-dis.c (onebyte_has_modrm): New static array.
3366 (twobyte_has_modrm): New static array.
3367 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3369 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3371 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3374 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3376 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3379 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3381 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3382 m68010up, not just m68020up | cpu32.
3384 * Makefile.in (SONAME): New variable.
3385 ($(SHLINK)): Make a link to the transformed name, as well.
3386 (stamp-tshlink): New target.
3387 (install): Skip stamp-tshlink during install.
3389 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3391 * configure.in: Call AC_ARG_PROGRAM.
3392 * configure: Rebuild.
3393 * Makefile.in (program_transform_name): New variable.
3394 (install): Transform library name before installing it.
3396 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3398 * i960-dis.c (mem): Add HX dcinva instruction.
3400 Support for building as a shared library, based on patches from
3401 Alan Modra <alan@spri.levels.unisa.edu.au>:
3402 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3403 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3404 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3405 * configure: Rebuild.
3406 * Makefile.in (ALLLIBS): New variable.
3407 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3408 (COMMON_SHLIB, SHLINK): New variables.
3409 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3410 (STAGESTUFF): Remove variable.
3411 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3412 (stamp-piclist, piclist): New targets.
3413 ($(SHLIB), $(SHLINK)): New targets.
3414 ($(OFILES)): Depend upon stamp-picdir.
3415 (disassemble.o): Build twice if PICFLAG is set.
3416 (MOSTLYCLEAN): Add pic/*.o.
3417 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3418 (distclean): Remove pic and stamp-picdir.
3419 (install): Install shared libraries.
3420 (stamp-picdir): New target.
3422 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3424 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3425 Print unknown instruction as "unknown", rather than in hex.
3427 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3429 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3431 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3433 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3435 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3437 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3438 when necessary. From Ulrich Drepper
3439 <drepper@myware.rz.uni-karlsruhe.de>.
3441 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3443 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3444 sparc_num_opcodes. Update architecture enum values.
3445 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3446 (sparc_opcode_lookup_arch): New function.
3447 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3448 (sparc_opcodes): Add v9a shutdown insn.
3450 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3452 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3453 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3455 (print_insn_sparc64): Deleted.
3456 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3459 * sparc-opc.c (architecture_pname): Add v9a.
3461 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3463 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3464 incorrectly defined as 0x16 when it should be 0x15.
3465 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3466 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3467 excb (exception barrier) which is defined in the Alpha
3468 Architecture Handbook version 2.
3469 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3470 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3471 disassembled as or, for example.
3473 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3475 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3476 (_print_insn_mips): Change i from int to unsigned int.
3478 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3480 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3481 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3483 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3485 * i386-dis.c: Added Pentium Pro instructions.
3487 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3489 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3492 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3494 * sh-opc.h (sh_nibble_type): Added REG_B.
3495 (sh_arg_type): Added A_REG_B.
3496 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3498 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3500 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3502 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3504 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3506 * Makefile.in (distclean): Remove stamp-h. From Ronald
3507 F. Guilmette <rfg@monkeys.com>.
3509 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3511 From David Mosberger-Tang <davidm@azstarnet.com>:
3512 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3515 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3517 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3518 (sh_table): Added many SH3 opcodes.
3519 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3521 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3523 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3524 (subco,subco.): Mark this PPC, not PPCCOM.
3526 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3528 * configure: Rebuild with autoconf 2.7.
3530 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3532 * configure: Rebuild with autoconf 2.6.
3534 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3536 * configure.in: Sort list of architectures. Accept but do nothing
3537 for alliant, convex, pyramid, romp, and tahoe.
3539 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3541 * a29k-dis.c (print_special): Change num to unsigned int.
3543 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3545 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3548 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3550 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3551 * configure: Rebuilt.
3553 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3555 * configure.in: Add case for bfd_i860_arch.
3556 * configure: Rebuild.
3558 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3560 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3561 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3562 (NEXTDOUBLE): Likewise.
3563 (print_insn_m68k): Don't match fmoveml if there is more than one
3564 register in the list.
3565 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3567 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3569 * m68k-opc.c: Use #W rather than #w.
3570 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3572 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3574 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3575 and likewise for all the dbxx opcodes.
3577 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3579 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3581 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3583 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3584 the VR4100 specific instructions to the mips_opcodes structure.
3586 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3588 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3589 ugly Metrowerks bug in CW6, is fixed in CW7.
3591 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3593 * ppc-opc.c (whole file): Add flags for common/any support.
3595 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3597 * Makefile.in (BISON): Remove macro.
3598 (FLAGS_TO_PASS): Remove BISON.
3600 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3602 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3604 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3605 instructions that take no args by looking at the match mask.
3606 (print_insn_arg): Always print "%" before register names.
3607 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3608 [case '_']: Don't print "@#" before address.
3609 [case 'J']: Use "%s" as format string, not register name.
3610 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3612 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3614 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3617 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3619 From David Mosberger-Tang <davidm@azstarnet.com>
3621 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3622 (alpha_insn_set): added definitions for VAX floating point
3623 instructions (Unix compilers don't generate these, but handcoded
3624 assembly might still use them).
3626 * alpha-dis.c (print_insn_alpha): added support for disassembling
3627 the miscellaneous instructions in the Alpha instruction set.
3629 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3631 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3632 no longer create sysdep.h, sed ppc-opc.c to work around a
3633 serious Metrowerks C bug.
3634 * mpw-make.in: Remove.
3635 * mpw-make.sed: New file, used by mpw-configure to edit
3636 Makefile.in into an MPW makefile.
3638 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3640 * Makefile.in (maintainer-clean): New synonym for realclean.
3642 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3644 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3645 which use '0', '1', and '2' instead. Specify the proper size for
3646 a pmove immediate operand. Correct the pmovefd patterns to be
3647 moves to a register, not from a register.
3648 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3650 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3652 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3653 %psr, %wim, %tbr as F_NOTV9.
3655 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3657 * Makefile.in (Makefile): Just rebuild Makefile when running
3659 (config.h, stamp-h): New targets.
3660 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3661 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3662 rebuilding config.h.
3663 * configure: Rebuild.
3665 * mips-opc.c: Change unaligned loads and stores with "t,A"
3666 operands to use "t,A(b)".
3668 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3670 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3672 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3674 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3675 until 3 instead of until 2.
3677 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3679 * Makefile.in (ALL_CFLAGS): Define.
3680 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3681 (MOSTLYCLEAN): Add config.log.
3682 (distclean): Don't remove config.log.
3683 * configure.in: Substitute HDEFINES.
3684 * configure: Rebuild.
3686 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3688 * sh-opc.h (sh_arg_type): Add F_FR0.
3689 (sh_table, case fmac): Add F_FR0 as first argument.
3691 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3693 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3695 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3697 * sparc-dis.c: Remove all references to NO_V9.
3699 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3701 * aclocal.m4: Just include ../bfd/aclocal.m4.
3702 * configure: Rebuild.
3704 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3706 * sparc-dis.c (X_DISP19): Define.
3707 (print_insn, case 'G'): Use it.
3708 (print_insn, case 'L'): Sign extend displacement.
3710 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3712 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3713 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3714 host_makefile_frag or frags.
3715 * aclocal.m4: New file.
3716 * configure: Rebuild.
3717 * Makefile.in (INSTALL): Set to @INSTALL@.
3718 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3719 (INSTALL_DATA): Set to @INSTALL_DATA@.
3721 (AR_FLAGS): Set to rc rather than qc.
3722 (CC): Define as @CC@.
3723 (CFLAGS): Set to @CFLAGS@.
3724 (@host_makefile_frag@): Remove.
3725 (config.status): Remove dependency upon @frags@.
3727 * configure.in: ../bfd/config.bfd now just sets shell variables.
3728 Use them rather than looking through target Makefile fragments.
3729 * configure: Rebuild.
3731 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3733 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3735 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3737 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3738 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3741 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3742 (lookup_{name,value}): New functions.
3743 (prefetch_table): New static local.
3744 (sparc_{encode,decode}_prefetch): New functions.
3745 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3747 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3749 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3752 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3754 * sh-dis.c: Correct comment on first line of file.
3756 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3758 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3760 * sparc-opc.c (asi, membar): New static locals.
3761 (sparc_{encode,decode}_{asi,membar}): New functions.
3762 (sparc_opcodes, membar insn): Fix.
3763 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3764 Support decoding of membar masks.
3767 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3769 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3771 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3773 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3774 and likewise for the other branches. Add bhs as an alias for bcc,
3775 and likewise for the size variants. Add dbhs as an alias for
3778 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3780 * sh-opc.h (FP sts instructions): Update to match reality.
3782 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3784 * m68k-dis.c: (fpcr_names): Add % before all register names.
3785 (reg_names): Likewise.
3786 (print_insn_arg): Don't explicitly print % before register names.
3787 Add % before register names in static array names. In case 'r',
3788 print data registers as `@(Dn)', not `Dn@'. When printing a
3789 memory address, don't print @# before it.
3790 (print_indexed): Change base_disp and outer_disp from int to
3791 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3792 syntax. Sign extend 8 byte displacement correctly.
3793 (print_base): Print using MIT syntax. Print zpc when appropriate.
3794 Change parameter disp from int to bfd_vma.
3796 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3799 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3801 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3802 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3803 * sh-opc.h (sh_arg_type): Add new operand types.
3804 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3806 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3808 * Makefile.in (distclean): Remove generated file config.h.
3810 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3812 * Makefile.in (distclean): Remove generated file config.h.
3814 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3816 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3818 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3820 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3821 rather than numopcodes. Use m68k_opcodes rather than removed
3822 opcode function. Don't check F_ALIAS.
3823 (print_insn_arg): Change first parameter to be const char *.
3824 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3825 (m68k-opc.o): New target.
3826 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3827 * configure: Rebuild.
3829 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3831 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3832 (opcode_bits, opcode_hash_table): New variables.
3833 (opcodes_initialized): Renamed from opcodes_sorted.
3834 (build_hash_table): New function.
3835 (is_delayed_branch): Use hash table.
3836 (print_insn): Renamed from print_insn_sparc, made static.
3837 Build and use hash table. If !sparc64, ignore sparc64 insns,
3838 and vice-versa if sparc64.
3839 (print_insn_sparc, print_insn_sparc64): New functions.
3840 (compare_opcodes): Move sparc64 opcodes to end.
3841 Print commutative insns with constant second.
3842 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3844 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3846 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3847 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3848 avoids printing a delay slot in a delay slot.
3849 * sh-opc.h (sh_table): Fully bracket last entry.
3851 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3853 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3855 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3857 * configure.in: Get host_makefile_frag from ${srcdir}.
3859 * configure.in: Autoconfiscated. Check for string[s].h. Create
3860 config.h from config.in. Don't set up sysdep.h link.
3861 * sysdep.h: New file.
3862 * configure, config.in: New files, generated from configure.in.
3863 * Makefile.in: Updated to be processed autoconf-style.
3864 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3865 (Makefile): Depend on config.status.
3866 (config.status): New rule.
3867 * configure.bat: Update Makefile substitutions.
3869 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3871 * mips-opc.c (L1): Define.
3872 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3873 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3876 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3878 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3879 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3880 have multiple add units but only a single logical unit.
3882 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3883 shifted by 18, without any insertion or extraction function.
3884 (insert_cr, extract_cr): Remove.
3886 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3888 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3891 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3893 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3894 * sh-opc.h: Add copyright.
3896 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3898 * Makefile.in (crunch-m68k): Delete extra target accidentally
3899 checked in a while ago.
3901 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3903 * sh-opc.h (sh_table): Add SH3 support.
3905 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3907 * sh-opc.h: Added bsrf and braf.
3909 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3911 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3912 bogus [ls]fm{ea,fd} patterns.
3914 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3915 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3916 initialize it from memory. Make function static.
3917 (print_insn_{big,little}_arm): New functions.
3918 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3919 the correct endianness.
3921 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3923 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3926 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3928 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3929 17th, so that it builds again using GCC as the compiler.
3931 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3933 * mips-dis.c (print_insn_little_mips): Cast return value from
3934 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3935 expects an unsigned long, and that might be fewer words of
3936 argument storage (e.g., if bfd_vma is long long on a 32-bit
3938 (print_insn_big_mips): Likewise with bfd_getb32 value.
3939 (_print_insn_mips): Now static.
3941 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3943 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3944 gcc memory hog problem with initializer is fixed.
3946 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3948 Merge in support for Mac MPW as a host.
3949 (Old change descriptions retained for informational value.)
3951 * mpw-config.in (archname): Compute from the config.
3952 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3954 * mpw-config.in (target_arch): Compute from canonical target.
3955 (m68k, mips, powerpc, sparc): Add architectures.
3956 * mpw-make.in (disassemble.c.o): Add.
3957 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3959 * mpw-config.in (BFD_MACHINES): Set to a default value.
3960 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3962 * mpw-make.in (CSEARCH): Add extra-include to search path.
3964 * mpw-config.in (varargs.h): Don't create.
3965 (sysdep.h): Create using forward-include.
3966 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3968 * mpw-config.in: New file, MPW version of configure.in.
3969 * mpw-make.in: New file, MPW version of Makefile.in.
3971 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3973 * alpha-dis.c (print_insn_alpha): Put empty statement after
3976 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3978 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3979 (low_sign_extend): Likewise.
3980 (get_field): Delete unused function.
3981 (set_field, deposit_14, deposit_21): Likewise.
3983 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3985 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3988 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3990 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3992 * alpha-opc.h (OSF_ASMCODE): define
3993 print pal-code names as defined in App C of the
3994 Alpha Architecture Reference Manual
3996 * alpha-dis.c: cleaned up output
3997 print stylized code forms as defined in App A.4.3 of the
3998 Alpha Architecture Reference Manual
4000 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4004 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4007 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4009 * m68k-dis.c (opcode): New function. Returns address of opcode
4010 table entry given index, even if the opcode table was split to
4011 work around gcc bugs.
4012 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4014 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4015 (reg_names): Now const.
4016 (print_insn_arg): Arrays cacheFieldName and names now const.
4017 (print_indexed): Array scales now const.
4019 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4021 * ppc-opc.c: Sort recently added instructions by minor opcode
4022 number within major opcode number.
4024 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4026 * hppa-dis.c: Include libhppa.h.
4028 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4030 * mips-opc.c: Change dli to use M_DLI, and add dla.
4032 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4034 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4036 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4038 * mips-opc.c: Add r4650 mul instruction.
4040 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4042 * mips-opc.c: Add uld and usd macros for unaligned double load and
4045 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4047 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4048 mfdcr, mtdcr, icbt, iccci.
4050 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4052 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4053 signed char fields to shorts, more portable.
4055 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4057 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4058 char fields as signed chars, since they may have negative values.
4060 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4062 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4063 (mycroft@netbsd.org).
4065 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4067 From "Logg, Ed" <elogg@ea.com>:
4068 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4069 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4072 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4074 * ppc-opc.c: Changes based on patch from David Edelsohn
4075 <edelsohn@mhpcc.edu>.
4076 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4079 (insert_tbr): New static function.
4080 (extract_tbr): New static function.
4081 (XFXFXM_MASK, XFXM): Define.
4082 (XSPRBAT_MASK, XSPRG_MASK): Define.
4083 (powerpc_opcodes): Add instructions to access special registers by
4084 name. Add mtcr and mftbu.
4086 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4088 * mips-opc.c (P3): Define.
4089 (mips_opcodes): Add mad and madu.
4091 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4093 * configure.in: Add W65 support.
4094 * disassemble.c: Likewise.
4095 * w65-opc.h, w65-dis.c: New files.
4097 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4099 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4102 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4104 * mips-opc.c: Add dli as a synonym for li.
4106 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4108 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4109 print something for reserved opcode values, even if it won't
4112 * mips-dis.c (_print_insn_mips): When initializing, shift right
4113 and mask, to avoid sign extension problems on the Alpha.
4115 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4118 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4120 * sh-opc.h (mov.l gbr): Get direction right.
4121 * sh-dis.c (print_insn_shx): New function.
4122 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4123 print opcodes with right byte order.
4125 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4127 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4128 to avoid conflicts with getopt.
4130 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4132 * hppa-dis.c (print_insn_hppa): Read the instruction using
4133 bfd_getb32, so that it works on a little endian or 64 bit host.
4134 Remove unused local variable op.
4136 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4138 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4139 addu does not work correctly if -mips3.
4141 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4143 * a29k-dis.c (print_special): Add special register names defined
4144 on 29030, 29040 and 29050.
4145 (print_insn): Handle new operand type 'I'.
4147 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4149 * Makefile.in (INSTALL): Use top level install.sh script.
4151 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4153 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4154 that it works on a little endian host.
4156 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4158 * configure.in: Use ${config_shell} when running config.bfd.
4160 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4162 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4164 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4166 * a29k-dis.c (print_insn): Print the opcode.
4168 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4170 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4172 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4174 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4176 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4178 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4179 which store a value into memory.
4181 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4183 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4184 * arm-dis.c, arm-opc.h: New files.
4186 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4188 * Makefile.in (ns32k-dis.o): Add dependency.
4189 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4190 string, not as array of chars.
4192 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4194 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4196 * sparc-opc.c: Added sparclite extended FP operations, and
4197 versions of v9 impdep* instructions permitting specification of
4200 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4202 * i960-dis.c (reg_names): Now const.
4203 (struct sparse_tabent): New type, copied from array type in mem
4205 (ctrl): Local static array ctrl_tab now const.
4206 (cobr): Local static array cobr_tab now const.
4207 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4208 static variable mem_tab no longer explicitly initialized. Changed
4209 mem_init to const array of struct sparse_tabent.
4210 (reg): Local static variable reg_tab no longer explicitly
4211 initialized. Changed reg_init to const array of struct
4213 (ea): Local static array scale_tab now const.
4215 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4218 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4220 * configure.bat: the disassember needs to be enabled for
4221 "objdump -d" to work in djgpp.
4223 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4225 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4226 (invalid_float): Enabled general version, doesn't require running
4227 on ns32k host. Changed to take char* argument, and test for
4228 explicitly specified sizes, instead of using sizeof() on host CPU
4230 (INVALID_FLOAT): Cast first argument.
4231 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4232 list_P032, list_M032): Now const.
4233 (optlist, list_search): Made appropriate arguments now point to
4235 (print_insn_arg): Changed static array of one-character-string
4236 pointers into a static const array of characters; fixed sprintf
4237 statement accordingly.
4239 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4241 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4242 from distribution. A ns32k-dis.c from a previous distribution has
4243 been brought up to date and supports the new interface.
4245 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4247 * configure.in: add bfd_ns32k_arch target support.
4249 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4250 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4252 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4254 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4257 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4259 * h8300-dis.c, mips-dis.c: Don't use true and false.
4261 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4263 * configure.in: Change --with-targets to --enable-targets.
4265 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4267 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4268 opcodes to the first instruction with that opcode, to speed
4269 disassembly of large files. From ralphc@pyramid.com (Ralph
4272 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4274 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4276 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4278 * configure.bat: update to latest makefile.in
4280 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4282 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4283 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4284 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4285 slot insn is in a delay slot.
4286 * z8k-opc.h: (resflg): Fix patterns.
4287 * h8500-opc.h Fix CR insn patterns.
4289 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4291 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4292 "cmpl" before POWER versions, so that gas -many uses them.
4294 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4296 * disassemble.c: New file.
4297 * Makefile.in (OFILES): Add disassemble.o.
4298 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4299 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4300 binutils/configure.in.
4302 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4303 opcode being examined.
4305 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4307 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4308 (insert_ral, insert_ram, insert_ras): New functions.
4309 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4310 RAS for store with update.
4312 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4314 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4315 (edelsohn@npac.syr.edu).
4317 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4319 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4322 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4324 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4326 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4328 * ppc-opc.c (powerpc_operands): The signedp field has been
4329 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4330 instead. Add new operand SISIGNOPT.
4331 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4332 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4333 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4336 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4338 * i386-dis.c (struct private): Renamed to dis_private. `private'
4339 is a reserved word for dynix cc.
4341 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4343 * configure.in: Change error message to refer to bfd/config.bfd
4344 rather than bfd/configure.in.
4346 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4348 * ppc-opc.c: Define POWER2 as short alias flag.
4349 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4352 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4354 * i960-dis.c (print_insn_i960): Don't read a second word for
4355 opcodes 0, 1, 2 and 3.
4357 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4359 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4361 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4363 * m68881-ext.c: Removed; no longer used.
4364 * Makefile.in: Changed accordingly.
4366 * m68k-dis.c (ext_format_68881): Don't declare.
4367 (print_insn_m68k): If an instruction uses place 'i', it uses at
4368 least four fixed bytes.
4369 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4370 extended float, convert to double using floatformat_to_double, not
4371 ieee_extended_to_double, and fetch the data before converting it.
4373 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4375 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4376 davidj@ICSI.Berkeley.EDU (David Johnson).
4378 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4380 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4381 PowerPC uses bdnz[l][a].
4383 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4385 * dis-buf.c, i386-dis.c: Include sysdep.h.
4387 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4389 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4391 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4392 by Motorola PowerPC 601 with PPC_OPCODE_601.
4393 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4394 Disassemble Motorola PowerPC 601 instructions as well as normal
4395 PowerPC instructions.
4397 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4399 * i960-dis.c (reg, mem): Just use a static array instead of
4402 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4404 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4405 condition name index if this is for a negated condition.
4407 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4408 Floating point format for 'H' operand is backwards from normal
4409 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4410 operands (fmpyadd and fmpysub), handle bizarre register
4411 translation correctly for single precision format.
4413 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4414 or 'I' operands if the next format specifier is 'M' (fcmp
4415 condition completer).
4417 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4419 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4420 single number giving a bitmask for the MB and ME fields of an M
4421 form instruction. Change NB to accept 32, and turn it into 0;
4422 also turn 0 into 32 when disassembling. Seperated SH from NB.
4423 (insert_mbe, extract_mbe): New functions.
4424 (insert_nb, extract_nb): New functions.
4425 (SC_MASK): Mask out SA and LK bits.
4426 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4427 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4428 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4429 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4430 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4431 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4432 (powerpc_macros): Define table of macro definitions.
4433 (powerpc_num_macros): Define.
4435 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4436 if PPC_OPERAND_NEXT is set.
4438 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4440 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4441 char. Retrieve contents using bfd_getl32 instead of shifting.
4443 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4445 * ppc-opc.c: New file. Opcode table for PowerPC, including
4446 opcodes for POWER (RS/6000).
4447 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4448 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4449 (CFILES): Add ppc-dis.c.
4450 (ppc-dis.o, ppc-opc.o): New targets.
4451 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4453 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4455 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4456 No space before 'u', 'f', or 'N'.
4458 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4460 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4461 farther than we should.
4463 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4465 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4467 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4469 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4471 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4472 needs it, to prevent reading past the end of a section.
4474 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4476 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4477 Removed t,A case for la; always use t,A(b) case.
4479 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4481 From Ted Lemen <mellon@pepper.ncd.com>
4482 * mips-dis.c (print_insn_arg): Handle 'k'.
4483 * mips-opc.c: Make cache use k, not t.
4485 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4487 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4488 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4489 FLOAT_FORMAT_CODE to put out floating point register names.
4491 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4493 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4495 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4497 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4499 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4501 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4502 larger than 32. Moved dsxx32 variants first for disassembler.
4504 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4506 * z8kgen.c, z8k-opc.h: Add full lda information.
4508 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4510 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4511 movb instructions. Any necessary space will be emitted by
4512 the code to handle nullification completers.
4514 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4516 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4518 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4520 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4521 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4523 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4525 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4527 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4529 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4530 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4532 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4534 * m88k-dis.c (m88kdis): comment change. Remove space after
4536 (printop): handle new arg types DEC and XREG for m88110.
4538 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4540 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4541 type for absolute branch addresses. Delete special
4542 "ble" and "be" code in 'W' operand code.
4544 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4546 * mips-opc.c: Set hazard information correctly for branch
4547 likely instructions.
4549 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4551 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4552 info->fprintf_func for printing and info->print_address_func for
4555 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4557 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4559 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4561 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4562 Corrected second case of "b" for disassembler.
4564 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4566 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4567 to BFD swapping routines to correspond to BFD name changes.
4569 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4571 * mips-opc.c: Change div machine instruction to be z,s,t rather
4572 than s,t. Change div macro to be d,v,t rather than d,s,t.
4573 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4574 rem and remu which generates only the corresponding div
4575 instruction. This is for compatibility with the MIPS assembler,
4576 which only generates the simple machine instruction when an
4577 explicit destination of $0 is used.
4578 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4580 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4582 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4583 WR_31 hazard for bal, bgezal, bltzal.
4585 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4587 * hppa-dis.c (print_insn_hppa): Use print function
4588 from within the disassemble_info, not fprintf_filtered.
4590 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4592 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4593 Law, law@cs.utah.edu.)
4595 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * mips-opc.c ("absu"): Removed.
4600 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4602 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4603 Changed hazard information to distinguish between memory load
4604 delays and coprocessor load delays.
4606 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4610 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4612 * configure.in: Don't pass cpu to config.bfd.
4614 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * m88k-dis.c (m88kdis): Make class unsigned.
4618 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4620 * alpha-dis.c (print_insn_alpha): One branch format case was
4621 missing the instruction name.
4623 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4625 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4626 Add the arch-specific auxiliary files.
4627 (OFILES): Remove the arch-specific auxiliary files
4628 and use BFD_MACHINES instead of DIS_LIBS.
4629 * configure.in: Set BFD_MACHINES based on --with-targets option.
4631 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4633 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4636 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4638 * sparc-opc.c: Change CONST to const to deal with gcc
4639 -Dconst=__const -traditional.
4641 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4643 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4644 coprocessor instructions out of #if 0, and made them use new
4647 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4649 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4651 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4653 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4654 instruction, for use by the disassembler.
4656 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4657 hand-coded sign extensions that depended on 32-bit host ints.
4658 FIXME, we still depend on big-endian host bitfield ordering.
4659 (sparc_print_insn): Set the insn_info_valid field, and the
4660 other fields that describe the instruction being printed.
4662 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4664 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4665 `jmp' instead of just one of them.
4667 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4669 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4670 (fput_fp_reg_r): Renamed from fput_reg_r.
4671 (fput_fp_reg): New function.
4672 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4674 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4676 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4678 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4680 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4682 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4683 don't output a space.
4685 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4687 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4689 * mips-opc.c: New file, containing opcode table from
4690 ../include/opcode/mips.h.
4691 * Makefile.in: Add it.
4693 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4695 * m88k-dis.c: New file, moved in from gdb and changed to use the
4696 new dis-asm.h disassembler interface.
4697 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4698 (m88k-dis.o): New target.
4700 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4702 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4703 argument string const char * to correspond to opcode/mips.h.
4705 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4707 * mips-dis.c: Updated to account for name changes in new version
4709 * Makefile.in: Added header file dependencies.
4711 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4713 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4715 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4717 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4718 extend, rather than shifts.
4720 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4722 * Makefile.in: Undo 15 June change.
4724 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4726 * m68k-dis.c (print_insn_arg): Change return value to byte count
4728 * m68k-dis.c: Re-write to detect invalid operands before
4729 printing anything, so we can handle this the same way we
4730 handle invalid opcodes.
4732 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4734 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4736 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4738 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4741 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4743 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4745 * configure.in: Do make sysdep.h link.
4746 * Makefile.in: Search ../include. Don't search ../bfd.
4748 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4750 Changes from Jeff Law, law@cs.utah.edu:
4751 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4752 Do not print a space before the completers specified by
4755 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4757 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4758 defined, since gdb has been fixed.
4760 Changes from Jeff Law, law@cs.utah.edu:
4761 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4762 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4763 be a *disassemble_info, not a *FILE.
4764 * hppa-dis.c: Support 'd', '!', and 'a'.
4765 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4766 * hppa-dis.c: Delete cases which are no longer needed.
4768 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4770 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4772 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4774 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4777 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4779 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4780 * configure.in: No longer need to configure to get sysdep.h.
4782 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4784 * Patches from Jeffrey Law <law@cs.utah.edu>.
4785 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4786 templates for 1.1 FP computational instructions.
4788 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4790 * h8500-dis.c (print_insn_h8500): Address argument is type
4792 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4795 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4796 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4798 * sparc-dis.c (compare_opcodes): Move static declaration to
4801 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4803 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4804 instruction, remove unimp hack from 'l' argument.
4806 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4808 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4811 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4813 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4814 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4817 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4819 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4820 arrays of string pointers to 2-d arrays of chars, to save
4823 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4825 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4826 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4828 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4830 * hppa-dis.c: New file from Utah, adapted to new disassembler
4832 * Makefile.in: Include it.
4834 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4836 * sh-dis.c, sh-opc.h: New files.
4838 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4840 * alpha-dis.c, alpha-opc.h: New files.
4842 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4844 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4847 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4849 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4851 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4853 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4856 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4858 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4859 and double percent signs a few places.
4861 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4863 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4864 Use info->print_address_func not print_address.
4866 * dis-buf.c (generic_print_address): New function.
4868 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4870 * Makefile.in: Add sparc-dis.c.
4871 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4873 Add `add' instruction to the set that get checked
4874 for a preceding `sethi' in order to print an absolute address.
4875 * (print_insn): Disassembly prefers real instructions.
4876 (is_delayed_branch): Speed up.
4877 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4878 Still missing some float ops, and needs testing.
4879 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4880 F_ALIAS. Use printf, not fprintf, when not passing a file
4882 (compare_opcodes): Check that identical instructions have
4883 identical opcodes, complain otherwise.
4886 * Include reg_names.
4888 Use dis-asm.h/read_memory_func interface.
4890 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4892 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4893 deliberately return non-zero to setjmp from longjmp. Otherwise
4894 this code fails to compile.
4896 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4898 * m68k-dis.c: Fix prototype for fetch_arg().
4900 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4902 * dis-buf.c: New file, for new read_memory_func interface.
4903 Makefile.in (OFILES): Include it.
4904 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4905 Use new read_memory_func interface.
4907 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4909 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4910 * h8500-opc.h: Fix couple of opcodes.
4912 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4914 * Makefile.in: add dvi & installcheck targets
4916 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4918 * Makefile.in: Update for h8500-dis.c.
4920 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4922 * h8500-dis.c, h8500-opc.h: New files
4924 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4926 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4927 ../include/dis-asm.h.
4928 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4929 and ../gdb/m68k-pinsn.c).
4930 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4931 and ../gdb/i386-pinsn.c).
4932 * m68881-ext.c: New file. Moved definition of
4933 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4934 * Makefile.in: Adjust for new files.
4935 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4936 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4937 can be dis-assembled.
4939 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4941 * mips-dis.c (print_insn_arg): Now returns void.
4943 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4945 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4946 files that use the macros.
4948 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4950 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4951 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4952 (CFILES): Added mips-dis.c.
4954 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4956 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4957 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4959 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4961 * Makefile.in: Improve *clean rules.
4962 * configure.in: Allow a default host.
4964 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4966 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4967 files include other sysdep files
4969 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4971 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4973 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4975 * configure.in: For host support, use ../bfd/configure.host
4976 so it stays in sync with the ../bfd/hosts database.
4978 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4980 * configure.in: use cpu-vendor-os triple instead of nested cases
4982 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4984 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4985 *always* the wrong one.
4987 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4989 * z8kgen.c: added copyright info
4991 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4993 * z8k-dis.c (unparse_instr): prettier tabs
4994 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4996 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4998 * configure.in: Add ncr* configuration.
4999 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5000 picayune ANSI compilers happy.
5002 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5004 * configure.in (i386): Make i386 and i486 synonymous for now.
5005 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5007 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5009 * Makefile.in (install): Fix typo.
5011 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5013 * Makefile.in (make): Remove obsolete crud.
5014 (sparc-opc.o): Avoid Sun Make VPATH bug.
5016 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5018 * Makefile.in: since there are no SUBDIRS, remove rule and
5019 references of subdir_do.
5021 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5023 * Makefile.in (install): Get the library name right here too.
5024 Don't install bfd.h, since it's unrelated to this library. No
5025 subdirs to recurse into, either.
5026 (CFILES): The source file has a .c suffix, not .o.
5028 * sparc-opc.c: New file, moved from BFD.
5029 * Makefile.in (OFILES): Build it.
5031 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5033 * z8k-dis.c: fixed forward refferences of some declarations.
5035 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5037 * Makefile.in: get the name of the library right
5039 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5041 * z8k-dis.c: knows how to disassemble z8k stuff
5042 * z8k-opc.h: new file full of z8000 opcodes
5046 version-control: never