1 2012-08-11 Saravanan Ekanathan <saravanan.ekanathan@amd.com>
4 * i386-gen.c (cpu_flag_init): Add CpuFMA in CPU_BDVER2_FLAGS.
5 * i386-init.h: Regenerated.
7 2012-08-09 Nick Clifton <nickc@redhat.com>
9 * po/vi.po: Updated Vietnamese translation.
11 2012-08-07 Roland McGrath <mcgrathr@google.com>
13 * i386-dis.c (reg_table): Fill out REG_0F0D table with
14 AMD-reserved cases as "prefetch".
15 (MOD_0F18_REG_4, MOD_0F18_REG_5): New enum constants.
16 (MOD_0F18_REG_6, MOD_0F18_REG_7): Likewise.
17 (reg_table): Use those under REG_0F18.
18 (mod_table): Add those cases as "nop/reserved".
20 2012-08-07 Jan Beulich <jbeulich@suse.com>
22 * i386-opc.tbl: Remove "FIXME" comments from SVME instructions.
24 2012-08-06 Roland McGrath <mcgrathr@google.com>
26 * i386-dis.c (print_insn): Print spaces between multiple excess
27 prefixes. Return actual number of excess prefixes consumed,
30 * i386-dis.c (OP_REG): Ignore REX_B for segment register cases.
32 2012-08-06 Roland McGrath <mcgrathr@google.com>
33 Victor Khimenko <khim@google.com>
34 H.J. Lu <hongjiu.lu@intel.com>
36 * i386-dis.c (OP_sI): In b_T_mode and v_mode, REX_W trumps DFLAG.
37 (putop): For 'T', 'U', and 'V', treat REX_W like DFLAG.
38 (intel_operand_size): For stack_v_mode, treat REX_W like DFLAG.
39 (OP_E_register): Likewise.
40 (OP_REG): For low 8 whole registers, treat REX_W like DFLAG.
42 2012-08-02 Jan-Benedict Glaw <jbglaw@lug-owl.de>
44 * configure.in: Formatting.
45 * configure: Regenerate.
47 2012-08-01 Alan Modra <amodra@gmail.com>
49 * h8300-dis.c: Fix printf arg warnings.
50 * i960-dis.c: Likewise.
51 * mips-dis.c: Likewise.
52 * pdp11-dis.c: Likewise.
54 * v850-dis.c: Likewise.
55 * configure.in: Formatting.
56 * configure: Regenerate.
57 * rl78-decode.c: Regenerate.
58 * po/POTFILES.in: Regenerate.
60 2012-07-31 Chao-Ying Fu <fu@mips.com>
61 Catherine Moore <clm@codesourcery.com>
62 Maciej W. Rozycki <macro@codesourcery.com>
64 * micromips-opc.c (WR_a, RD_a, MOD_a): New macros.
67 (micromips_opcodes): Add DSP ASE instructions.
68 * mips-dis.c (print_insn_micromips) <'2', '3'>: New cases.
69 <'4', '5', '6', '7', '8', '0', '^', '@'>: Likewise.
71 2012-07-31 Jan Beulich <jbeulich@suse.com>
73 * i386-opc.tbl (vmovntdqa): Move up into 256-bit integer AVX2
74 instruction group. Mark as requiring AVX2.
75 * i386-tbl.h: Re-generate.
77 2012-07-30 Nick Clifton <nickc@redhat.com>
79 * po/opcodes.pot: Updated template.
80 * po/es.po: Updated Spanish translation.
81 * po/fi.po: Updated Finnish translation.
83 2012-07-27 Mike Frysinger <vapier@gentoo.org>
85 * configure.in (BFD_VERSION): Run bfd/configure --version and
86 parse the output of that.
87 * configure: Regenerate.
89 2012-07-25 James Lemke <jwlemke@codesourcery.com>
91 * ppc-opc.c (powerpc_opcodes): Add/remove PPCVLE for some 32-bit insns.
93 2012-07-24 Stephan McCamant <smcc@cs.berkeley.edu>
94 Dr David Alan Gilbert <dave@treblig.org>
97 * arm-dis.c: Add necessary casts for printing integer values.
98 Use %s when printing string values.
99 * hppa-dis.c: Likewise.
100 * m68k-dis.c: Likewise.
101 * microblaze-dis.c: Likewise.
102 * mips-dis.c: Likewise.
103 * sparc-dis.c: Likewise.
105 2012-07-19 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
108 * i386-dis.c (VEX_LEN_0FXOP_08_CC): New.
109 (VEX_LEN_0FXOP_08_CD): Likewise.
110 (VEX_LEN_0FXOP_08_CE): Likewise.
111 (VEX_LEN_0FXOP_08_CF): Likewise.
112 (VEX_LEN_0FXOP_08_EC): Likewise.
113 (VEX_LEN_0FXOP_08_ED): Likewise.
114 (VEX_LEN_0FXOP_08_EE): Likewise.
115 (VEX_LEN_0FXOP_08_EF): Likewise.
116 (xop_table): Fix entries for vpcomb, vpcomw, vpcomd, vpcomq,
117 vpcomub, vpcomuw, vpcomud, vpcomuq.
118 (vex_len_table): Add entries for VEX_LEN_0FXOP_08_CC,
119 VEX_LEN_0FXOP_08_CD, VEX_LEN_0FXOP_08_CE, VEX_LEN_0FXOP_08_CF,
120 VEX_LEN_0FXOP_08_EC, VEX_LEN_0FXOP_08_ED, VEX_LEN_0FXOP_08_EE,
123 2012-07-16 Michael Zolotukhin <michael.v.zolotukhin@intel.com>
125 * i386-dis.c (PREFIX_0F38F6): New.
126 (prefix_table): Add adcx, adox instructions.
127 (three_byte_table): Use PREFIX_0F38F6.
128 (mod_table): Add rdseed instruction.
129 * i386-gen.c (cpu_flag_init): Add CpuADX, CpuRDSEED, CpuPRFCHW.
130 (cpu_flags): Likewise.
131 * i386-opc.h: Add CpuADX, CpuRDSEED, CpuPRFCHW.
132 (i386_cpu_flags): Add fields cpurdseed, cpuadx, cpuprfchw.
133 * i386-opc.tbl: Add instrcutions adcx, adox, rdseed. Extend
135 * i386-tbl.h: Regenerate.
136 * i386-init.h: Likewise.
138 2012-07-05 Thomas Schwinge <thomas@codesourcery.com>
140 * mips-dis.c: Remove gratuitous newline.
142 2012-07-05 Sean Keys <skeys@ipdatasys.com>
144 * xgate-dis.c: Removed an IF statement that will
145 always be false due to overlapping operand masks.
146 * xgate-opc.c: Corrected 'com' opcode entry and
149 2012-07-02 Roland McGrath <mcgrathr@google.com>
151 * i386-opc.tbl: Add RepPrefixOk to nop.
152 * i386-tbl.h: Regenerate.
154 2012-06-28 Nick Clifton <nickc@redhat.com>
156 * po/vi.po: Updated Vietnamese translation.
158 2012-06-22 Roland McGrath <mcgrathr@google.com>
160 * i386-opc.tbl: Add RepPrefixOk to ret.
161 * i386-tbl.h: Regenerate.
163 * i386-opc.h (RepPrefixOk): New enum constant.
164 (i386_opcode_modifier): New bitfield 'repprefixok'.
165 * i386-gen.c (opcode_modifiers): Add RepPrefixOk.
166 * i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all
167 instructions that have IsString.
168 * i386-tbl.h: Regenerate.
170 2012-06-11 Andreas Schwab <schwab@linux-m68k.org>
172 * ppc-opc.c (lvsl, lvebx, isellt, icbt, ldepx, lwepx, lvsr, lvehx)
173 (iselgt, lvewx, iseleq, isel, dcbst, dcbstep, dcbfl, dcbf, lbepx)
174 (lvx, dcbfep, dcbtstls, stvebx, dcbtstlse, stdepx, stwepx, dcbtls)
175 (stvehx, dcbtlse, stvewx, stbepx, icblc, stvx, dcbtstt, dcbtst)
176 (dcbtst, dcbtstep, dcbtt, dcbt, dcbt, lhepx, eciwx, dcbtep)
177 (dcread, lxvdsx, lvxl, dcblc, sthepx, ecowx, dcbi, dcread, icbtls)
178 (stvxl, lxsdx, lfdepx, stxsdx, stfdepx, dcba, dcbal, lxvw4x)
179 (tlbivax, lfdpx, lxvd2x, tlbsrx., stxvw4x, tlbsx, tlbsx., stfdpx)
180 (stfqx, stxvd2x, icbi, icbiep, icread, dcbzep): Change RA to RA0.
182 2012-05-19 Alan Modra <amodra@gmail.com>
184 * ppc-dis.c: Don't include elf32-ppc.h, do include elf/ppc.h.
185 (get_powerpc_dialect): Detect VLE sections from ELF sh_flags.
187 2012-05-18 Alan Modra <amodra@gmail.com>
189 * ia64-opc.c: Remove #include "ansidecl.h".
190 * z8kgen.c: Include sysdep.h first.
192 * arc-dis.c: Include sysdep.h first, remove some redundant includes.
193 * bfin-dis.c: Likewise.
194 * i860-dis.c: Likewise.
195 * ia64-dis.c: Likewise.
196 * ia64-gen.c: Likewise.
197 * m68hc11-dis.c: Likewise.
198 * mmix-dis.c: Likewise.
199 * msp430-dis.c: Likewise.
200 * or32-dis.c: Likewise.
201 * rl78-dis.c: Likewise.
202 * rx-dis.c: Likewise.
203 * tic4x-dis.c: Likewise.
204 * tilegx-opc.c: Likewise.
205 * tilepro-opc.c: Likewise.
206 * rx-decode.c: Regenerate.
208 2012-05-17 James Lemke <jwlemke@codesourcery.com>
210 * ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.
212 2012-05-17 James Lemke <jwlemke@codesourcery.com>
214 * ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.
216 2012-05-17 Daniel Richard G. <skunk@iskunk.org>
217 Nick Clifton <nickc@redhat.com>
220 * configure.in: Add check that sysdep.h has been included before
221 any system header files.
222 * configure: Regenerate.
223 * config.in: Regenerate.
224 * sysdep.h: Generate an error if included before config.h.
225 * alpha-opc.c: Include sysdep.h before any other header file.
226 * alpha-dis.c: Likewise.
227 * avr-dis.c: Likewise.
228 * cgen-opc.c: Likewise.
229 * cr16-dis.c: Likewise.
230 * cris-dis.c: Likewise.
231 * crx-dis.c: Likewise.
232 * d10v-dis.c: Likewise.
233 * d10v-opc.c: Likewise.
234 * d30v-dis.c: Likewise.
235 * d30v-opc.c: Likewise.
236 * h8500-dis.c: Likewise.
237 * i370-dis.c: Likewise.
238 * i370-opc.c: Likewise.
239 * m10200-dis.c: Likewise.
240 * m10300-dis.c: Likewise.
241 * micromips-opc.c: Likewise.
242 * mips-opc.c: Likewise.
243 * mips61-opc.c: Likewise.
244 * moxie-dis.c: Likewise.
245 * or32-opc.c: Likewise.
246 * pj-dis.c: Likewise.
247 * ppc-dis.c: Likewise.
248 * ppc-opc.c: Likewise.
249 * s390-dis.c: Likewise.
250 * sh-dis.c: Likewise.
251 * sh64-dis.c: Likewise.
252 * sparc-dis.c: Likewise.
253 * sparc-opc.c: Likewise.
254 * spu-dis.c: Likewise.
255 * tic30-dis.c: Likewise.
256 * tic54x-dis.c: Likewise.
257 * tic80-dis.c: Likewise.
258 * tic80-opc.c: Likewise.
259 * tilegx-dis.c: Likewise.
260 * tilepro-dis.c: Likewise.
261 * v850-dis.c: Likewise.
262 * v850-opc.c: Likewise.
263 * vax-dis.c: Likewise.
264 * w65-dis.c: Likewise.
265 * xgate-dis.c: Likewise.
266 * xtensa-dis.c: Likewise.
267 * rl78-decode.opc: Likewise.
268 * rl78-decode.c: Regenerate.
269 * rx-decode.opc: Likewise.
270 * rx-decode.c: Regenerate.
272 2012-05-17 Alan Modra <amodra@gmail.com>
274 * ppc_dis.c: Don't include elf/ppc.h.
276 2012-05-16 Meador Inge <meadori@codesourcery.com>
278 * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
281 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
282 Stephane Carrez <stcarrez@nerim.fr>
284 * configure.in: Add S12X and XGATE co-processor support to m68hc11
286 * disassemble.c: Likewise.
287 * configure: Regenerate.
288 * m68hc11-dis.c: Make objdump output more consistent, use hex
289 instead of decimal and use 0x prefix for hex.
290 * m68hc11-opc.c: Add S12X and XGATE opcodes.
292 2012-05-14 James Lemke <jwlemke@codesourcery.com>
294 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
295 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
296 (vle_opcd_indices): New array.
297 (lookup_vle): New function.
298 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
299 (print_insn_powerpc): Likewise.
300 * ppc-opc.c: Likewise.
302 2012-05-14 Catherine Moore <clm@codesourcery.com>
303 Maciej W. Rozycki <macro@codesourcery.com>
304 Rhonda Wittels <rhonda@codesourcery.com>
305 Nathan Froyd <froydnj@codesourcery.com>
307 * ppc-opc.c (insert_arx, extract_arx): New functions.
308 (insert_ary, extract_ary): New functions.
309 (insert_li20, extract_li20): New functions.
310 (insert_rx, extract_rx): New functions.
311 (insert_ry, extract_ry): New functions.
312 (insert_sci8, extract_sci8): New functions.
313 (insert_sci8n, extract_sci8n): New functions.
314 (insert_sd4h, extract_sd4h): New functions.
315 (insert_sd4w, extract_sd4w): New functions.
316 (insert_vlesi, extract_vlesi): New functions.
317 (insert_vlensi, extract_vlensi): New functions.
318 (insert_vleui, extract_vleui): New functions.
319 (insert_vleil, extract_vleil): New functions.
320 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
321 (BI16, BI32, BO32, B8): New.
322 (B15, B24, CRD32, CRS): New.
323 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
324 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
325 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
326 (SH6_MASK): Use PPC_OPSHIFT_INV.
327 (SI8, UI5, OIMM5, UI7, BO16): New.
328 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
329 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
331 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
332 (OPVUP, OPVUP_MASK OPVUP): New
333 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
334 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
335 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
336 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
337 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
338 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
339 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
340 (SE_IM5, SE_IM5_MASK): New.
341 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
342 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
343 (BO32DNZ, BO32DZ): New.
344 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
346 (powerpc_opcodes): Add new VLE instructions. Update existing
347 instruction to include PPCVLE if supported.
348 * ppc-dis.c (ppc_opts): Add vle entry.
349 (get_powerpc_dialect): New function.
350 (powerpc_init_dialect): VLE support.
351 (print_insn_big_powerpc): Call get_powerpc_dialect.
352 (print_insn_little_powerpc): Likewise.
353 (operand_value_powerpc): Handle negative shift counts.
354 (print_insn_powerpc): Handle 2-byte instruction lengths.
356 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
359 * configure.in: Invoke ACX_HEADER_STRING.
360 * configure: Regenerate.
361 * config.in: Regenerate.
362 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
363 string.h and strings.h.
365 2012-05-11 Nick Clifton <nickc@redhat.com>
368 * arm-dis.c (print_insn): Fix detection of instruction mode in
369 files containing multiple executable sections.
371 2012-05-03 Sean Keys <skeys@ipdatasys.com>
373 * Makefile.in, configure: regenerate
374 * disassemble.c (disassembler): Recognize ARCH_XGATE.
375 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
377 * configure.in: Recognize xgate.
378 * xgate-dis.c, xgate-opc.c: New files for support of xgate
379 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
380 and opcode generation for xgate.
382 2012-04-30 DJ Delorie <dj@redhat.com>
384 * rx-decode.opc (MOV): Do not sign-extend immediates which are
385 already the maximum bit size.
386 * rx-decode.c: Regenerate.
388 2012-04-27 David S. Miller <davem@davemloft.net>
390 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
391 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
393 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
394 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
396 * sparc-opc.c (CBCOND): New define.
397 (CBCOND_XCC): Likewise.
398 (cbcond): New helper macro.
399 (sparc_opcodes): Add compare-and-branch instructions.
401 * sparc-dis.c (print_insn_sparc): Handle ')'.
402 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
404 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
405 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
407 2012-04-12 David S. Miller <davem@davemloft.net>
409 * sparc-dis.c (X_DISP10): Define.
410 (print_insn_sparc): Handle '='.
412 2012-04-01 Mike Frysinger <vapier@gentoo.org>
414 * bfin-dis.c (fmtconst): Replace decimal handling with a single
415 sprintf call and the '*' field width.
417 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
419 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
421 2012-03-16 Alan Modra <amodra@gmail.com>
423 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
424 (powerpc_opcd_indices): Bump array size.
425 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
426 corresponding to unused opcodes to following entry.
427 (lookup_powerpc): New function, extracted and optimised from..
428 (print_insn_powerpc): ..here.
430 2012-03-15 Alan Modra <amodra@gmail.com>
431 James Lemke <jwlemke@codesourcery.com>
433 * disassemble.c (disassemble_init_for_target): Handle ppc init.
434 * ppc-dis.c (private): New var.
435 (powerpc_init_dialect): Don't return calloc failure, instead use
437 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
438 (powerpc_opcd_indices): New array.
439 (disassemble_init_powerpc): New function.
440 (print_insn_big_powerpc): Don't init dialect here.
441 (print_insn_little_powerpc): Likewise.
442 (print_insn_powerpc): Start search using powerpc_opcd_indices.
444 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
446 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
447 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
448 (PPCVEC2, PPCTMR, E6500): New short names.
449 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
450 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
451 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
452 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
453 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
454 optional operands on sync instruction for E6500 target.
456 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
458 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
460 2012-02-27 Alan Modra <amodra@gmail.com>
462 * mt-dis.c: Regenerate.
464 2012-02-27 Alan Modra <amodra@gmail.com>
466 * v850-opc.c (extract_v8): Rearrange to make it obvious this
467 is the inverse of corresponding insert function.
468 (extract_d22, extract_u9, extract_r4): Likewise.
469 (extract_d9): Correct sign extension.
470 (extract_d16_15): Don't assume "long" is 32 bits, and don't
471 rely on implementation defined behaviour for shift right of
473 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
474 (extract_d23): Likewise, and correct mask.
476 2012-02-27 Alan Modra <amodra@gmail.com>
478 * crx-dis.c (print_arg): Mask constant to 32 bits.
479 * crx-opc.c (cst4_map): Use int array.
481 2012-02-27 Alan Modra <amodra@gmail.com>
483 * arc-dis.c (BITS): Don't use shifts to mask off bits.
484 (FIELDD): Sign extend with xor,sub.
486 2012-02-25 Walter Lee <walt@tilera.com>
488 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
489 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
490 TILEPRO_OPC_LW_TLS_SN.
492 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
494 * i386-opc.h (HLEPrefixNone): New.
495 (HLEPrefixLock): Likewise.
496 (HLEPrefixAny): Likewise.
497 (HLEPrefixRelease): Likewise.
499 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
501 * i386-dis.c (HLE_Fixup1): New.
502 (HLE_Fixup2): Likewise.
503 (HLE_Fixup3): Likewise.
510 (MOD_C6_REG_7): Likewise.
511 (MOD_C7_REG_7): Likewise.
512 (RM_C6_REG_7): Likewise.
513 (RM_C7_REG_7): Likewise.
514 (XACQUIRE_PREFIX): Likewise.
515 (XRELEASE_PREFIX): Likewise.
516 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
517 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
518 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
519 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
520 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
521 MOD_C6_REG_7 and MOD_C7_REG_7.
522 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
523 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
525 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
526 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
528 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
530 (cpu_flags): Add CpuHLE and CpuRTM.
531 (opcode_modifiers): Add HLEPrefixOk.
533 * i386-opc.h (CpuHLE): New.
535 (HLEPrefixOk): Likewise.
536 (i386_cpu_flags): Add cpuhle and cpurtm.
537 (i386_opcode_modifier): Add hleprefixok.
539 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
540 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
541 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
542 operand. Add xacquire, xrelease, xabort, xbegin, xend and
544 * i386-init.h: Regenerated.
545 * i386-tbl.h: Likewise.
547 2012-01-24 DJ Delorie <dj@redhat.com>
549 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
550 * rl78-decode.c: Regenerate.
552 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
555 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
557 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
559 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
560 register and move them after pmove with PSR/PCSR register.
562 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
564 * i386-dis.c (mod_table): Add vmfunc.
566 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
567 (cpu_flags): CpuVMFUNC.
569 * i386-opc.h (CpuVMFUNC): New.
570 (i386_cpu_flags): Add cpuvmfunc.
572 * i386-opc.tbl: Add vmfunc.
573 * i386-init.h: Regenerated.
574 * i386-tbl.h: Likewise.
576 For older changes see ChangeLog-2011
582 version-control: never