1 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c: Finish constifying various completers, register
6 1999-09-14 Michael Meissner <meissner@cygnus.com>
8 * configure.in (Canonicalization of target names): Remove adding
9 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
10 generates $ac_config_sub with a ${CONFIG_SHELL} already.
11 * configure: Regenerate.
13 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
15 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
17 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
19 1999-09-07 Nick Clifton <nickc@cygnus.com>
21 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
22 names for the mulu and muls patterns.
24 1999-09-04 Steve Chamberlain <sac@pobox.com>
28 * disassemble.c (disassembler): Handle bfd_arch_pj.
29 * configure.in: Handle bfd_pj_arch.
30 * Makefile.am: Rebuild dependencies.
31 (CFILES): Add pj-dis.c and pj-opc.c.
32 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
33 * configure, Makefile.in: Rebuild.
35 1999-09-04 H.J. Lu <hjl@gnu.org>
37 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
39 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
41 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
43 1999-08-04 Doug Evans <devans@casey.cygnus.com>
45 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
46 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
47 * m32r-opinst.c: Rebuild.
49 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
51 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
54 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
56 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
57 extract_10U_store): New.
58 (print_insn_hppa): Add new completers.
60 * hppa-dis.c (signed_unsigned_names,mix_half_names,
61 saturation_names): New.
62 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
64 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
66 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
68 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
69 to decide to print a space.
71 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
73 * i386-dis.c: Add AMD athlon instruction support.
75 1999-08-10 Ian Lance Taylor <ian@zembu.com>
77 From Wally Iimura <iimura@microunity.com>:
78 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
79 overflow at end of address space.
80 (generic_print_address): Use sprintf_vma.
82 1999-08-08 Ian Lance Taylor <ian@zembu.com>
84 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
85 MKDEP. Rebuild dependencies.
86 * Makefile.in: Rebuild.
88 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
90 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
91 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
92 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
93 (print_insn_hppa): Add 64 bit condition completers.
95 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
97 * hppa-dis.c (print_insn_hppa): Change condition args to use
100 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
102 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
105 1999-07-21 Ian Lance Taylor <ian@zembu.com>
108 * configure.bat: Remove; obsolete.
110 1999-07-11 Ian Lance Taylor <ian@zembu.com>
112 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
113 (generic_strcat_address): Add cast to avoid warning.
114 * i386-dis.c: Initialize all structure fields to avoid warnings.
115 Add ATTRIBUTE_UNUSED as appropriate.
117 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
119 * sparc-dis.c (print_insn_sparc): Differentiate between
120 addition and oring when guessing symbol for comment.
122 1999-07-05 Nick Clifton <nickc@cygnus.com>
124 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
127 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
129 * i386-dis.c: Mention intel mode specials in macro char comment.
131 1999-06-21 Ian Lance Taylor <ian@zembu.com>
133 * alpha-dis.c: Don't include <stdlib.h>.
134 * arm-dis.c: Include "sysdep.h".
135 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
137 * Makefile.am: Rebuild dependencies.
138 * Makefile.in: Rebuild.
140 1999-06-16 Nick Clifton <nickc@cygnus.com>
142 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
145 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
147 * arm-dis.c (arm_regnames): Turn into a pointer to a register
149 (arm_regnames_standard): New variable: Array of ARM register
150 names according to ARM instruction set nomenclature.
151 (arm_regnames_apcs): New variable: Array of ARM register names
152 according to ARM Procedure Call Standard.
153 (arm_regnames_raw): New variable: Array of ARM register names
154 using just 'r' and the register number.
155 (arm_toggle_regnames): New function: Toggle the chosen register set
157 (parse_disassembler_options): New function: Parse any target
158 disassembler command line options.
159 (print_insn_big_arm): Call parse_disassembler_options if any
161 (print_insn_little_arm): Call parse_disassembler_options if any
164 1999-06-13 Ian Lance Taylor <ian@zembu.com>
166 * i386-dis.c (FWAIT_OPCODE): Define.
167 (used_prefixes): New static variable.
168 (fetch_data): Don't print an error message if we have already
169 fetched some bytes successfully.
170 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
171 (prefix_name): New static function.
172 (print_insn_i386): If setjmp fails, indicating a data error, but
173 we have managed to fetch some bytes, print the first one as a
174 prefix or a .byte pseudo-op. If fwait is followed by a non
175 floating point instruction, print the first prefix. Set
176 used_prefixes when prefixes are used. If any prefixes were not
177 used after disassembling the instruction, print the first prefix
178 instead of printing the instruction.
179 (putop): Set used_prefixes when prefixes are used.
180 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
181 (OP_DIR, OP_SIMD_Suffix): Likewise.
183 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
185 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
186 Support signx %reg, clruw %reg.
188 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
190 * sparc-opc.c: Add aliases Solaris as supports.
192 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
194 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
195 * Makefile.in: Regenerated.
197 1999-06-03 Philip Blundell <philb@gnu.org>
199 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
200 when target is PC-relative.
202 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
204 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
207 * m68k-dis.c (fetch_arg): Add places `n', `o'.
209 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
210 Add mcf5206e to appropriate instructions.
211 Add alias for MAC, MSAC.
213 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
216 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
217 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
219 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
221 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
223 * i386-dis.c (Ed): Define.
224 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
226 (OP_rm): Rename to OP_Rd.
229 (putop): Add const to template and p.
230 (print_insn_x86): Delete.
231 (print_insn_i386): Merge old function print_insn_x86. Add const
233 (struct dis386): Add const to name.
234 (dis386_att, dis386_intel): Add const.
235 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
236 (names32, names16, names8, names_seg, index16): Add const.
237 (grps, prefix_user_table, float_reg): Add const.
238 (float_mem_att, float_mem_intel): Add const.
239 (oappend): Add const to s.
240 (OP_REG): Add const to s.
241 (ptr_reg): Add const to s.
242 (dofloat): Add const to dp.
243 (OP_C): Don't skip modrm, it's now done in OP_Rd.
246 (OP_Rd): Check for valid mod. Call Op_E to print.
247 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
248 (OP_MS): Check for valid mod. Call Op_EM to print.
249 (OP_3DNowSuffix): Set obufp and use oappend rather than
250 strcat. Call BadOp() for errors.
251 (OP_SIMD_Suffix): Likewise.
252 (BadOp): New function.
254 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
256 * i386-dis.c (dis386_intel): Remove macro chars, except for
257 jEcxz. Change cWtR and cRtd to cW and cR.
258 (dis386_twobyte_intel): Remove macro chars here too.
259 (putop): Handle R and W macros for intel mode.
261 * i386-dis.c (SIMD_Fixup): New function.
262 (dis386_twobyte_att): Use it on movlps and movhps, and change
263 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
264 (dis386_twobyte_intel): Same here.
266 * i386-dis.c (Av): Remove.
270 (OP_SIMD_Suffix): New function.
271 (OP_DIR): Remove dead code.
272 (eAX_reg..eDI_reg): Renumber.
273 (onebyte_has_modrm): Table numbering comments.
274 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
275 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
276 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
277 and handle SIMD cmp insns in OP_SIMD_Suffix.
278 (info->bytes_per_line): Bump from 5 to 6.
280 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
281 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
283 PIII SIMD support from Doug Ledford <dledford@redhat.com>
284 * i386-dis.c (XM, EX, None): Define.
285 (OP_XMM, OP_EX, OP_None): New functions.
286 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
287 (GRP14): Rename to GRPAMD.
288 (GRP*): Add USE_GROUPS flag.
290 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
291 (twobyte_has_modrm): Add SIMD entries.
292 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
293 (grps): Add SIMD insns.
294 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
295 oappend repz if uses_f3_prefix. Add code to handle new groups for
298 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
299 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
300 operand from Av to Jv.
302 1999-05-07 Nick Clifton <nickc@cygnus.com>
304 * mcore-dis.c (print_insn_mcore): Use .short to display
305 unidentified instructions, not .word.
307 1999-04-26 Tom Tromey <tromey@cygnus.com>
309 * aclocal.m4, configure: Updated for new version of libtool.
311 1999-04-14 Doug Evans <devans@casey.cygnus.com>
313 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
314 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
316 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
318 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
321 1999-04-10 Doug Evans <devans@casey.cygnus.com>
323 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
324 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
326 1999-04-06 Ian Lance Taylor <ian@zembu.com>
328 * opintl.h (LC_MESSAGES): Never define.
330 1999-04-04 Ian Lance Taylor <ian@zembu.com>
332 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
333 (separator_char, scale_char): Likewise.
334 (print_insn_x86): Likewise.
335 (print_insn_i386): Likewise. Add declaration.
337 1999-03-26 Doug Evans <devans@casey.cygnus.com>
339 * fr30-dis.c: Rebuild.
340 * m32r-dis.c: Rebuild.
342 1999-03-23 Ian Lance Taylor <ian@zembu.com>
344 * m68k-opc.c: Change compare instructions to use "@s" rather than
345 ";s" when used with an immediate operand.
347 1999-03-22 Doug Evans <devans@casey.cygnus.com>
349 * cgen-opc.c (cgen_set_cpu): Delete.
350 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
351 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
353 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
355 * po/opcodes.pot: Rebuild.
357 1999-03-16 Martin Hunt <hunt@cygnus.com>
359 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
361 1999-03-11 Doug Evans <devans@casey.cygnus.com>
363 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
364 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
365 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
366 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
367 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
368 * m32r-opinst.c: Rebuild.
370 1999-02-25 Doug Evans <devans@casey.cygnus.com>
372 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
373 (cgen_hw_lookup_by_num): Rewrite.
374 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
375 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
376 * m32r-opinst.c: Rebuild.
378 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
380 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
381 (insert_jhint): Fix insertion mask.
382 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
384 1999-02-10 Doug Evans <devans@casey.cygnus.com>
386 * Makefile.in: Rebuild.
388 1999-02-09 Doug Evans <devans@casey.cygnus.com>
390 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
391 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
392 * Makefile.am: Remove references to them.
393 (HFILES): Add fr30-desc.h,m32r-desc.h.
394 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
396 (ALL_MACHINES): Update.
397 * configure.in: Redo handling of cgen_files.
398 (bfd_i960_arch): Delete i960c-*.lo files.
399 * configure: Regenerate.
400 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
401 (hash_insn_array): Rewrite.
402 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
403 (hash_insn_array): Rewrite.
404 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
405 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
406 (cgen_lookup_get_insn_operands): Ditto.
407 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
408 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
409 * po/POTFILES.in: Rebuild.
410 * po/opcodes.pot: Rebuild.
412 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
414 * Makefile.am: Rebuild dependencies.
415 (HFILES): Add fr30-opc.h.
416 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
417 * Makefile.in: Rebuild.
419 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
420 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
422 * acconfig.h: Remove.
423 * configure: Rebuild with current autoconf/automake.
424 * aclocal.m4: Likewise.
425 * config.in: Likewise.
426 * Makefile.in: Likewise.
428 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
430 * m68k-opc.c: Correct move (not movew) to status word on 5200.
432 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
434 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
435 * i386-dis.c (x_mode): Define.
439 (dis386_twobyte): Remove.
440 (dis386_twobyte_att): New.
441 (dis386_twobyte_intel): New.
442 (print_insn_x86): Use new arrays.
444 (float_mem_intel): New.
445 (float_mem_att): New.
446 (dofloat): Use new float_mem arrays.
447 (print_insn_i386_att): New.
448 (print_insn_i386_intel): New.
449 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
450 (putop): Handle intel syntax.
451 (OP_indirE): Handle intel syntax.
452 (OP_E): Handle intel syntax.
453 (OP_I): Handle intel syntax.
454 (OP_sI): Handle intel syntax.
455 (OP_OFF): Handle intel syntax.
459 1999-01-27 Doug Evans <devans@casey.cygnus.com>
461 * fr30-opc.h,fr30-opc.c: Rebuild.
462 * i960c-opc.h,i960c-opc.c: Rebuild.
463 * m32r-opc.c: Rebuild.
465 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
467 * hppa-dis.c: revert HP merge changes until HP gives us
470 1999-01-19 Nick Clifton <nickc@cygnus.com>
472 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
473 offsets as well as symbloic address.
475 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
477 * hppa-dis.c: fix comments and some indentation.
479 1999-01-12 Doug Evans <devans@casey.cygnus.com>
481 * fr30-opc.c,i960c-opc.c: Regenerate.
483 1999-01-11 Doug Evans <devans@casey.cygnus.com>
485 * fr30-opc.c: Regenerate.
487 1999-01-06 Doug Evans <devans@casey.cygnus.com>
489 * m32r-dis.c: Regenerate.
491 1999-01-05 Doug Evans <devans@casey.cygnus.com>
493 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
494 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
495 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
497 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
499 * configure.in: Require autoconf 2.12.1 or higher.
501 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
503 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
505 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
507 * fr30-opc.c: Regenerated.
509 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
511 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
513 1998-12-15 Dave Brolley <brolley@cygnus.com>
515 * fr30-opc.c,fr30-opc.h: Regenerated.
517 1998-12-14 Dave Brolley <brolley@cygnus.com>
519 * fr30-opc.c,fr30-opc.h: Regenerated.
521 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
523 * fr30-opc.c,fr30-opc.h: Regenerated.
525 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
527 * m32r-opc.c: Regenerate.
529 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
531 * dis-buf.c (generic_strcat_address): reformat to GNU coding
532 conventions. change sprintf call to an sprintf_vma call.
534 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
536 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
538 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
540 The following changes were made by
541 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
542 David Taylor <taylor@texas.cygnus.com>, and
543 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
544 merge in changes by HP; HP did not create ChangeLog entries.
546 * dis-buf.c (generic_strcat_address): new function.
548 * hppa-dis.c: Changes to improve hppa disassembly.
549 Changed formatting in : reg_names, fp_reg_names,control_reg,
550 New variables : sign_extension_names, deposit_names, conversion_names
551 float_test_names, compare_cond_names_double, add_cond_names_double,
552 logical_cond_names_double, unit_cond_names_double,
553 branch_push_pop_names, saturation_names, shift_names, mix_names,
554 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
555 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
556 (fput_const): renamed as fput_hex_const
558 - use the macros fputs_filtered and
559 fput_decimal_const whenever possible; calls to sign_extend require
560 2 params -- add a missing second param of 0.
561 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
562 architecture version number of current machine. HP folks are
563 trying to handle situation where the target program was compiled
564 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
566 - added new cases : 'g', 'B', 'm'
567 - added cases specifically for PA 2.0
568 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
569 - calls to fput_const become calls to fput_hex_const
571 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
573 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
574 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
575 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
576 * Makefile.in: Rebuilt.
577 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
579 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
580 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
582 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
584 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
586 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
588 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
590 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
591 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
593 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
595 * fr30-opc.c: Regenerate.
597 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
599 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
601 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
603 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
605 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
607 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
609 1998-11-30 Doug Evans <devans@casey.cygnus.com>
611 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
612 CGEN_INSN_BASE_VALUE.
613 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
614 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
616 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
618 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
620 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
622 * fr30-asm.c,fr30-dis.c: Regenerated.
624 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
626 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
628 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
630 * fr30-opc.c: Regenerated.
632 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
634 * fr30-opc.c: Regenerated.
635 * fr30-opc.h: Regenerated.
636 * fr30-dis.c: Regenerated.
637 * fr30-asm.c: Regenerated.
639 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
641 * mips-opc.c (sync.p,sync.l): Swap insn values.
643 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
645 * fr30-opc.c: Regenerate.
647 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
649 * fr30-opc.c: Regenerated.
650 * fr30-opc.h: Regenerated.
652 1998-11-18 Doug Evans <devans@casey.cygnus.com>
654 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
655 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
657 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
659 * fr30-opc.c: Regenerated.
661 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
663 * fr30-opc.c: Regenerated.
664 * fr30-opc.h: Regenerated.
665 * fr30-dis.c: Regenerated.
666 * fr30-asm.c: Regenerated.
668 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
670 * po/opcodes.pot: Regenerated.
671 * fr30-opc.c: Regenerated.
672 * fr30-opc.h: Regenerated.
673 * fr30-dis.c: Regenerated.
674 * fr30-asm.c: Regenerated.
676 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
678 * disassemble.c (disassembler): Add support for FR30 target.
680 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
682 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
683 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
685 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
687 * po/opcodes.pot: Regenerate.
688 * po/POTFILES.in: Regenerate.
689 * fr30-opc.c: Regenerate.
690 * fr30-opc.h: Regenerate.
692 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
694 * m32r-asm.c: Regenerate.
696 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
698 * configure.in: Added case for bfd_fr30_arch.
699 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
700 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
701 (CLEANFILES): Added stamp-fr30.
703 * fr30-asm.c: New file.
704 * fr30-dis.c: New file.
705 * fr30-opc.c: New file.
706 * fr30-opc.h: New file.
707 * po/POTFILES.in: Regenerated
708 * po/opcodes.pot: Regenerated
710 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
712 * configure.in: detect cygwin* instead of cygwin32*
713 * configure: regenerate
715 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
717 * mips-opc.c (IS_M): Added.
719 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
721 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
723 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
725 * m32r-opc.h,m32r-opc.c: Regenerate.
727 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
729 * i386-dis.c (OP_3DNowSuffix): New static function.
732 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
733 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
734 (insn_codep): New static variable.
735 (print_insn_x86): Init insn_codep after prefixes.
736 (grps): Add GRP14 entries for prefetch, prefetchw.
739 From Jeff B Epler <jepler@usgs.gov>
740 * i386-dis.c (Suffix3DNow): New table.
742 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
744 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
746 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
748 * d10v-dis.c (print_operand): If num is nonzero, then
749 add OPERAND_ACC1, not OPERAND_ACC0.
751 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
753 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
756 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
758 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
761 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
763 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
765 1998-09-09 Michael Meissner <meissner@cygnus.com>
767 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
770 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
772 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
774 (print_insn_little_arm): Detect Thumb symbols in elf object
777 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
779 * alpha-dis.c (print_insn_alpha): Use the machine type to
780 decide which PALcode set to include.
782 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
784 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
786 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
788 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
789 MSUB and MSUBS instructions.
791 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
793 * ppc-opc.c (powerpc_operands): Omit parens around additions in
796 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
798 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
799 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
800 +, -, and d for ColdFire.
802 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
803 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
804 (extract_mbe): Likewise.
806 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
808 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
810 * m10300-opc.c: First cut at UDF instructions.
812 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
814 * m32r-opc.c: Regenerate (remove semantic descriptions).
816 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
818 * arm-dis.c (print_insn_big_arm): Fix indentation.
819 (print_insn_little_arm): Likewise.
821 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
823 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
825 (print_insn_little_arm): Likewise.
827 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
829 Move all global state data into opcode table struct, and treat
830 opcode table as something that is "opened/closed".
831 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
832 (cgen_asm_init): Delete.
833 (cgen_set_parse_operand_fn): New function.
834 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
835 (cgen_dis_init): Delete.
836 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
837 (cgen_current_{opcode_table_mach,endian}): Delete.
838 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
840 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
842 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
845 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
847 * m10300-opc.c: Add entries for "no_match_operands" field in
850 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
852 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
854 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
856 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
858 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
860 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
862 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
864 (OP_J): Remove unnecessary subtraction when 16-bit displacement
865 will be masked later.
867 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
869 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
871 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
873 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
875 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
877 * m10300-dis.c: Only recognize instructions from the currently
879 * m10300-opc.c: Add field indicating the particular variant of
880 the mn10300 each instruction is available on.
882 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
884 * configure.in: For bfd_vax_arch, build vax-dis.lo.
885 * Makefile.am: Rebuild dependencies.
886 (CFILES): Add vax-dis.c.
887 (ALL_MACHINES): Add vax-dis.lo.
888 * aclocal.m4: Rebuild with current libtool.
889 * configure, Makefile.in: Rebuild.
891 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
893 * vax-dis.c: New file, from work by Pauline Middelink
894 <middelin@polyware.iaf.nl>.
895 * disassemble.c (ARCH_vax): Define if ARCH_all.
896 (disassembler): Add case for ARCH_vax.
897 * makefile.vms: Support compilation on vms/vax.
899 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
901 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
902 related to sign extension and the size of ints.
904 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
906 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
907 instructions. Support (sp) addressing mode by expanding it into
910 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
912 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
914 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
916 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
918 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
920 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
923 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
925 * mips-dis.c (print_insn_little_mips): Previously, instruction
926 printing references the symbol table to determine whether the
927 instruction resides in a block regular instructions or mips16
928 instructions. However, when the disassembler gets used in other
929 environments where the symbol table is not present, we no longer
930 rely in the symbol table, rather, use the low bit of the
931 instructions address to guess. There should be no change for usage
932 of the disassembler in host based programs, gdb, objdump.
933 (print_insn_big_mips): ditto.
934 (print_insn_mips): ditto
936 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
938 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
940 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
942 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
944 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
946 * i386-dis.c (index16): Add '%' to register names. Use ','
949 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
951 * i386-dis.c: Don't print opcode suffix when we can figure out the
952 size (and gas can!) by register operands, or from the default
954 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
956 (dis386, dis386_twobyte, grps): Use new suffix macros.
957 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
958 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
959 order of cmps operands to agree with Intel docs. Correct operand
960 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
961 agree with Intel docs.
962 (print_insn_x86): Print orphan fwait before other prefixes.
963 Return correct byte count for orphan fwait with prefixes. Don't
964 print `bound' operands in reverse order.
965 (ckprefix): Stop accumulating prefixes if we get fwait.
966 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
968 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
970 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
971 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
973 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
975 Fix problems when bfd_vma is wider than long.
976 * i386-dis.c: Make op_address and start_pc unsigned.
977 (set_op): Make parameter unsigned.
978 (print_insn_x86): Cast to bfd_vma when passing a value to
980 * ns32k-dis.c (CORE_ADDR): Don't define.
981 (print_insn_ns32k): Change type of addr to bfd_vma. Use
982 bfd_scan_vma to read back address.
983 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
985 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
986 (NEXTULONG): New definition.
987 (print_insn_m68k): Avoid overflow when computing third argument of
989 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
990 Use disp instead of val to store offset values.
991 (print_indexed): Use base_disp instead of word to store base
992 displacement, to avoid overflow.
993 * m10300-dis.c (disassemble): Cast value to long when computing
994 pc-relative address, to get correct sign extension.
996 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
998 * m32r-opc.c: Regenerate.
1000 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1002 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1003 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1005 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1007 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1009 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1011 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1013 (OP_DSreg): Rename from OP_DSSI.
1014 (OP_ESreg): Rename from OP_ESDI.
1015 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1017 (append_seg): Rename from append_prefix.
1018 (ptr_reg): New function.
1019 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1021 (PREFIX_ADDR): Rename from PREFIX_ADR.
1022 (float_reg): Add non-broken opcodes for people who don't want
1025 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1027 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1030 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1032 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1034 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1036 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1037 0; produce error message for shifts of size 32 (or 64 for 64-bit
1038 shifts), because the hardware doesn't support them.
1040 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1042 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1043 LONG_2, LONG_2b formats to use this new operand.
1045 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1047 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1049 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1051 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1052 endian data support.
1054 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1056 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1057 and SHORT_B3b formats to use Rb instead of Ra.
1059 Add FLAG_MUL16 to MUL2XH opcode.
1061 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1062 to existing 1.1.1 parallelisation prohibition procedure.
1064 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1066 * m32r-asm.c,m32r-dis.c: Regenerate.
1068 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1070 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1071 with a shift count of 0.
1073 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1075 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1076 (cgen_hw_lookup_by_num): New function.
1078 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1080 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1082 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1084 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1085 as big-endian on SPARClite.
1087 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1089 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1091 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1093 * po/Make-in (install-info): New target.
1095 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1097 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1098 * configure: Rebuild.
1100 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1102 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1103 variety of ISA2 instructions to set bottom ten bits of trap code.
1105 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1107 * Makefile.am (config.status): Add explicit target so that
1108 config.status depends upon bfd/configure.in.
1109 * Makefile.in: Rebuild.
1111 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1113 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1114 instructions to set bottom ten bits of break code.
1115 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1116 for above optional argument.
1118 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1120 * makefile.vms: Run dec c with /nodebug.
1122 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1124 * Makefile.in: Rebuilt.
1125 * Makefile.am: Regenerated dependencies with mkdep.
1127 * opintl.h (_): Define as dgettext.
1129 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1131 * cgen-asm.c: Internationalised.
1132 * m32r-asm.c: Internationalised.
1133 * m32r-dis.c: Internationalised.
1134 * m32r-opc.c: Internationalised.
1136 * aclocal.m4: Regenerated.
1137 * configure: Regenerated.
1138 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1139 * Makefile.in: Rebuild.
1140 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1141 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1143 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1145 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1147 * aclocal.m4, configure: Rebuild with current tools.
1149 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1151 * opintl.h: New file - contains internationalisation macros used
1152 by source files in this directory.
1153 * po/: New subdirectory - contains internationalisation files.
1154 * po/Make-in: New file - Makefile constructor.
1155 * po/POTFILES.in: New file - list of files in opcodes directory
1156 that should be scan for internationalisation macros.
1157 * po/opcodes.pot: New file - list of internationisation strings
1158 found in files mentioned in po/POTFILES.in.
1159 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1160 entry. Add intl directory to include paths.
1161 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1162 HAVE_STRCPY, HAVE_LC_MESSAGES
1163 * configure.in: Add rule to build Makefile in po subdirectory.
1164 * Makefile.in: Rebuilt.
1165 * aclocal.m4: Rebuilt.
1166 * config.in: Rebuilt.
1167 * configure: Rebuilt.
1168 * alpha-opc.c: Internationalised.
1169 * arc-dis.c: Internationalised.
1170 * arc-opc.c: Internationalised.
1171 * arm-dis.c: Internationalised.
1172 * cgen-asm.c: Internationalised.
1173 * d30v-dis.c: Internationalised.
1174 * dis-buf.c: Internationalised.
1175 * h8300-dis.c: Internationalised.
1176 * h8500-dis.c: Internationalised.
1177 * i386-dis.c: Internationalised.
1178 * m10200-dis.c: Internationalised.
1179 * m10300-dis.c: Internationalised.
1180 * m68k-dis.c: Internationalised.
1181 * m88k-dis.c: Internationalised.
1182 * mips-dis.c: Internationalised.
1183 * ns32k-dis.c: Internationalised.
1184 * opintl.h: Internationalised.
1185 * ppc-opc.c: Internationalised.
1186 * sparc-dis.c: Internationalised.
1187 * v850-dis.c: Internationalised.
1188 * v850-opc.c: Internationalised.
1190 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1192 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1193 (asm_hash_table_entries): New variable.
1194 (cgen_asm_init): Free asm_hash_table_entries.
1195 (hash_insn_array,hash_insn_list): New functions.
1196 (build_asm_hash_table): Use them. Hash macro insns as well.
1197 (cgen_asm_lookup_insn): Update.
1198 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1199 (dis_hash_table_entries): New variable.
1200 (cgen_dis_init): Free dis_hash_table_entries.
1201 (hash_insn_array,hash_insn_list): New functions.
1202 (build_dis_hash_table): Use them. Hash macro insns as well.
1203 (cgen_dis_lookup_insn): Update.
1204 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1205 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1206 (cgen_macro_insn_count): New function.
1207 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1209 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1211 * i386-dis.c (OP_DSSI): Print segment override.
1213 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1215 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1218 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1220 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1221 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1222 * configure.in: Define and substitute WIN32LDFLAGS and
1224 * aclocal.m4: Rebuild with new libtool.
1225 * configure, Makefile.in: Rebuild.
1227 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1229 * m32r-opc.c: Regenerate.
1231 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1233 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1234 before trying to copy it.
1235 * Makefile.in: Rebuild.
1237 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1239 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1241 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1243 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1244 from an arbitrary valid buffer instead of fetching them on demand
1246 (invalid_float): use bit_extract_simple() instead of bit_extract().
1248 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1250 From H.J. Lu <hjl@gnu.org>:
1251 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1254 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1256 * Branched binutils 2.9.
1258 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1260 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1261 disassembling last 4 bytes of a section.
1263 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1265 Fix some gcc -Wall warnings:
1266 * arc-dis.c (print_insn): Add casts to avoid warnings.
1267 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1268 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1269 * m10200-dis.c (disassemble): Likewise.
1270 * m10300-dis.c (disassemble): Likewise.
1271 * ns32k-dis.c (print_insn_ns32k): Likewise.
1272 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1273 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1274 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1275 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1276 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1277 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1278 * tic80-dis.c (print_one_instruction): Likewise.
1279 * w65-dis.c (print_operand): Likewise.
1280 * z8k-dis.c (fetch_data): Likewise.
1281 * a29k-dis.c: Add return type for find_byte_func_type.
1282 * arc-opc.c: Include <stdio.h>. Remove declarations of
1283 insert_multshift and extract_multshift.
1284 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1286 (extract_value): Fully parenthesize expression.
1287 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1288 * h8500-opc.h (h8500_table): Fully bracket initializer.
1289 * w65-opc.h (optable): Likewise.
1290 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1291 * i386-dis.c (OP_E): Initialize local variables.
1292 * m10200-dis.c (print_insn_mn10200): Likewise.
1293 * mips-dis.c (print_insn_mips16): Likewise.
1294 * sh-dis.c (print_insn_shx): Likewise.
1295 * v850-dis.c (print_insn_v850): Likewise.
1296 * ns32k-dis.c (print_insn_arg): Declare.
1297 (get_displacement, invalid_float): Declare.
1298 (list_search, sign_extend, flip_bytes): Declare return type.
1299 (get_displacement): Likewise.
1300 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1302 (print_insn_ns32k): Make i unsigned.
1303 (invalid_float): Make static. Declare type of val.
1304 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1305 on each for iteration.
1306 * tic30-dis.c (get_indirect_operand): Likewise.
1307 * z8k-dis.c (print_insn_z8001): Declare return type.
1308 (print_insn_z8002): Likewise.
1309 (unparse_instr): Fix sprintf format strings.
1311 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1313 * mips-opc.c: Add "sync.l" and "sync.p".
1315 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1317 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1318 default m68k variant to recognize.
1320 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1321 (ctrl, cobr, mem, ea): Likewise.
1322 (print_addr): Likewise. Remove cast.
1323 (ea): Cast argument of print_addr to bfd_vma.
1325 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1327 (cgen_parse_unsigned_integer): Likewise.
1328 (cgen_parse_address): Likewise.
1330 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1332 * i960-dis.c (ctrl): Add full braces to structure initialization.
1333 (cobr, mem, reg): Likewise.
1334 (ea): Correct parenthesization in expression.
1336 * cgen-asm.c: Include <ctype.h>.
1337 (build_asm_hash_table): Remove unused local variable i.
1338 (cgen_parse_keyword): Add casts to avoid warnings.
1340 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1341 symbol. Fix indentation.
1342 (print_insn_little_arm): Likewise.
1344 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1346 * configure.in: Use AM_DISABLE_SHARED.
1347 * aclocal.m4, configure: Rebuild with libtool 1.2.
1349 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1351 These patches are courtesy of Jonathan Walton and Tony Thompson
1352 (athompso@cambridge.arm.com).
1354 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1357 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1358 both the offset and the label closest to the destination.
1360 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1362 * m32r-opc.h: Regenerate.
1364 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1366 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1368 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1370 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1371 assume that info->symbols is non-empty.
1373 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1375 * alpha-opc.c (cvtqs) There is no such thing.
1376 (cvttq): Missing most of the /*d variants.
1378 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1380 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1381 delayed branches or jumps.
1383 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1385 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1387 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1388 * tic30-dis.c (print_branch): Likewise.
1390 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1392 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1393 saved_symbol code as it is no longer needed.
1395 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1397 * cgen-asm.c: Include symcat.h.
1398 * cgen-dis.c,cgen-opc.c: Ditto.
1399 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1401 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1403 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1405 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * m32r-opc.[ch]: Regenerate.
1409 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1411 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1412 arguments. Don't perform validation here.
1413 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1415 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1417 * m32r-opc.c: Regenerate.
1419 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1421 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1422 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1424 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1426 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1428 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1430 * configure.in: Get the version number from BFD.
1431 * configure: Rebuild.
1433 From H.J. Lu <hjl@gnu.org>:
1434 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1435 * Makefile.in: Rebuild.
1437 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1439 * m32r-opc.c: Regenerate.
1440 * m32r-opc.h: Regenerate.
1442 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1444 * m32r-opc.c: Regenerate.
1446 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1448 Fix rac to accept only a0:
1449 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1450 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1451 Introduce OPERAND_GPR.
1452 * d10v-dis.c (print_operand): Likewise.
1454 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1456 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1457 (cgen_hw_lookup): Make result const.
1458 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1460 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1462 * configure, aclocal.m4: Rebuild with new libtool.
1464 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1466 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1467 instructions use a PC relative branch, not absolute.
1469 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1471 * configure.in: Set libtool_enable_shared rather than
1472 libtool_shared. Remove diversion hack.
1473 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1475 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1477 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1478 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1480 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1482 * tic30-dis.c: New file.
1483 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1484 * configure.in: Handle bfd_tic30_arch.
1485 * Makefile.am: Rebuild dependencies.
1486 (CFILES): Add tic30-dis.c
1487 (ALL_MACHINES): Add tic30-dis.lo.
1488 * configure, Makefile.in: Rebuild.
1490 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1492 * m32r-opc.h (HAVE_CPU_M32R): Define.
1494 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1496 * v850-opc.c (insertion routines): If both alignment and size is
1497 wrong then report this.
1499 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1501 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1502 Only recognize instructions for the current target_processor.
1504 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1506 * d10v-dis.c (PC_MASK): Correct value.
1507 (print_operand): If there's a reloc, don't calculate the
1508 address because they could be in different sections.
1510 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1512 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1513 instruction after the 4650's "mul" instruction; nobody's using the
1514 4010 these days. If object files someday indicate which processor
1515 variant they're intended for, we can do a better job at this.
1517 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1519 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1520 table provided entry size. Use CGEN_INSN_MNEMONIC.
1521 (cgen_parse_keyword): Rewrite.
1522 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1523 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1524 * cgen-opc.c: Clean up pass over `struct foo' usage.
1525 (cgen_keyword_lookup_value): Handle "" entry.
1526 (cgen_keyword_add): Likewise.
1528 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1530 * mips-opc.c: Add FP_D to s.d instruction flags.
1532 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1534 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1536 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1538 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1539 PC relative offset forms before the 15 bit forms. An assembler command
1540 line option now chooses the default.
1542 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1544 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1545 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1547 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1549 * configure: Only build libopcodes shared if --enable-shared's value
1550 was `yes', or was set to `*opcodes*'.
1551 * aclocal.m4: Likewise.
1552 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1553 original source of this bit of code. It's not clear what the best fix
1556 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1558 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1559 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1560 offset forms before the 15 bit forms, to default to the long forms.
1562 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1564 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1566 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1568 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1569 symbol if none is present.
1570 (print_insn_big_arm): Prevent examination of stored symbol if
1573 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1575 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1577 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1579 * disassemble.c: Remove disasm_symaddr() function.
1581 * arm-dis.c: Use info->symbol instead of info->flags to determine
1582 if disassmbly should be in Thumb or Arm mode.
1584 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1586 * arm-dis.c: Add support for disassembling Thumb opcodes.
1587 (print_insn_thumb): New function.
1589 * disassemble.c (disasm_symaddr): New function.
1591 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1592 (thumb_opcodes): Table of Thumb opcodes.
1594 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1596 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1598 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1599 and 'v' as operand types.
1601 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1603 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1604 <olivier.carmona@di.epfl.ch>.
1605 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1606 which has a two word opcode with a one word argument.
1608 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1610 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1611 unsigned, not signed.
1612 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1614 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1616 * d10v-dis.c (print_operand):
1617 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1619 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1621 * d10v-opc.c (OPERAND_FLAG): Split into:
1622 (OPERAND_FFLAG, OPERAND_CFLAG) .
1626 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1628 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1629 field for all INSN_MACRO's.
1630 * mips16-opc.c: same
1632 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1634 * mips-opc.c (sync,cache): These are 3900 insns.
1636 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1638 sh-opc.h (sh_table): Remove ftst/nan.
1640 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1642 * mips-opc.c (ffc, ffs): Fix mask.
1644 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1646 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1649 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1651 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1652 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1654 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1656 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1657 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1659 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1661 * v850-dis.c (disassemble): Replace // with /* ... */
1663 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1665 * sparc-opc.c: Add wr & rd for v9a asr's.
1666 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1667 (v9a_asr_reg_names): New variable.
1668 Patch from David Miller <davem@vger.rutgers.edu>.
1670 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1672 * sparc-opc.c (v9notv9a): New insn type.
1673 (IMPDEP): Move to the end to not conflict with edge8 et al.
1674 Patch from David Miller <davem@vger.rutgers.edu>.
1676 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1678 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1680 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1682 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1684 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1686 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1687 of disassemble_info structure to determine if an overlay address
1688 has a matching symbol in low memory.
1690 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1691 new symbol_at_address_func field in disassemble_info structure.
1693 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1695 * v850-opc.c (extract_d22): Use signed arithmatic.
1697 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1699 * mips-opc.c: Three op mult is not an ISA insn.
1701 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1703 * mips-opc.c: Fix formatting.
1705 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1707 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1708 than assuming that char is signed. Explicitly sign extend 16 bit
1709 values, rather than assuming that short is 16 bits.
1710 (OP_sI, OP_J, OP_DIR): Likewise.
1712 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1714 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1717 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1719 * v850-opc.c: Fix typo in comment.
1721 * v850-dis.c (disassemble): Add test of processor type when
1722 determining opcodes.
1724 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1726 * configure.in: Use a diversion to set enable_shared before the
1727 arguments are parsed.
1728 * configure: Rebuild.
1730 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1732 * m68k-opc.c (TBL1): Use ! rather than `.
1733 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1735 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1737 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1739 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1741 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1744 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1745 * aclocal.m4: Rebuild with new libtool.
1746 * configure: Rebuild.
1748 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1750 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1752 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1754 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1756 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1758 * v850-opc.c (v850_opcodes): Further rearrangements.
1760 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1762 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1764 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1766 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1769 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1771 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1773 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1775 * v850-opc.c: Initialise processors field of v850_opcode structure.
1777 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1779 Merge changes from Martin Hunt:
1781 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1783 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1784 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1785 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1787 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1789 * d30v-dis.c (print_insn): First operand of d*i (delayed
1790 branch) instructions is relative.
1792 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1793 (d30v_operand_table): Add IMM6S3 type.
1794 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1796 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1797 and cmp instructions.
1799 * d30v-opc.c: Correct entries for repeat*, and sat*.
1800 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1801 types. Correct several formats.
1803 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1805 * d30v-opc.c (pre_defined_registers): Change control registers.
1807 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1808 SHORT_C2. Manual was incorrect.
1810 * d30v-dis.c (lookup_opcode): Return value now indicates
1811 if an opcode has a short and a long form. Used for deciding
1812 to append a ".s" or ".l".
1813 (print_insn): Append a ".s" to an instruction if it is
1814 the short form and ".l" if it is a long form. Do not append
1815 anything if the instruction has only one possible size.
1817 * d30v-opc.c: Change mulx2h to require an even register.
1818 New form: SHORT_A2; a SHORT_A form that needs an even
1819 register as the first operand.
1821 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1822 instruction was not being disassembled if there were an odd
1823 number of instructions.
1825 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1827 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1829 * v850-dis.c (disassemble): Improved display of register lists.
1831 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1833 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1834 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1835 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1836 fandnot1s, fandnot2s.
1838 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1840 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1842 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1844 * cgen-asm.c (cgen_parse_address): New argument resultp.
1845 All callers updated.
1846 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1848 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1850 * mn10200-dis.c (disassemble): PC relative instructions are
1851 relative to the next instruction, not the current instruction.
1853 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1855 * v850-dis.c (disassemble): Only signed extend values that are not
1856 returned by extract functions.
1857 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1859 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1861 * v850-opc.c: Update comments. Remove use of
1862 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1864 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1866 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1868 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1870 * configure: Rebuilt with latest devo autoconf for NT support.
1872 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1874 * v850-dis.c (disassemble): Use curly brace syntax for register
1877 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1878 where r0 is being used as a destination register.
1880 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1882 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1884 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1886 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1888 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1890 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1891 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1894 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1896 * configure (cgen_files): Add support for v850e target.
1897 * configure.in (cgen_files): Add support for v850e target.
1899 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1901 * configure (cgen_files): Add support for v850ea target.
1902 * configure.in (cgen_files): Add support for v850ea target.
1904 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1906 * configure.in (bfd_arc_arch): Add.
1907 * configure: Rebuild.
1908 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1909 * Makefile.in: Rebuild.
1910 * arc-dis.c, arc-opc.c: New files.
1911 * disassemble.c (ARCH_all): Define ARCH_arc.
1912 (disassembler): Add ARC support.
1914 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1916 * v850-dis.c (disassemble): Add support for v850EA instructions.
1918 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1919 (v850_opcodes): Add v850EA instructions.
1921 * v850-dis.c (disassemble): Add support for v850E instructions.
1923 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1924 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1925 insert_spe, extract_spe): New Functions.
1926 (v850_opcodes): Add v850E instructions.
1928 * v850-opc.c: Reorganised and re-layed out to improve readability
1931 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1933 * configure: Rebuild with autoconf 2.12.1.
1935 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1937 * aclocal.m4, configure: Rebuild with new automake patches.
1939 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1941 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1942 * acinclude.m4: Just include acinclude.m4 from BFD.
1943 * aclocal.m4, configure: Rebuild.
1945 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1947 * Makefile.am: New file, based on old Makefile.in.
1948 * acconfig.h: New file.
1949 * acinclude.m4: New file.
1950 * stamp-h.in: New file.
1951 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1952 Removed shared library handling; now handled by libtool. Replace
1953 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1954 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1955 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1956 handling in AC_OUTPUT.
1957 * dep-in.sed: Change .o to .lo.
1958 * Makefile.in: Now built with automake.
1959 * aclocal.m4: Now built with aclocal.
1960 * config.in, configure: Rebuild.
1962 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1964 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1966 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1968 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1970 * sparc-dis.c (sorted_opcodes): New static local.
1971 (struct opcode_hash): `opcode' is pointer to const element.
1972 (build_hash): First arg is now table of sorted pointers.
1973 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1974 (compare_opcodes): Update.
1976 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1978 * cgen-opc.c: #include <ctype.h>.
1979 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1980 Handle case insensitive hashing.
1981 (hash_keyword_value): Change type of `value' to unsigned int.
1983 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1985 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1986 precision FP, mark it as such. Likewise for double precision
1987 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1990 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1992 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1994 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1995 nesting depth when all the macros are expanded.
1997 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1999 * sparc-opc.c: The fcmp v9a instructions take an integer register
2000 as a destination, not a floating point register. From Christian
2001 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2003 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2005 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2006 syntax. From Roman Hodek
2007 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2009 * i386-dis.c (twobyte_has_modrm): Fix pand.
2011 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2013 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2015 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2017 * arm-dis.c: Add prototypes for arm_decode_shift and
2020 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2022 * mips-opc.c: Add r3900 insns.
2024 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2026 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2027 print delay slot instructions on the same line. When using a PC
2028 relative load, add a comment with the value being loaded if it can
2031 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2033 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2034 to pushS/popS for segment regs and byte constant so that
2035 pushw/popw printed when in 16 bit data mode.
2037 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2038 print cbtw, cwtd in 16 bit data mode.
2039 * i386-dis.c (putop): extra case W to support above.
2041 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2042 address size prefix in 16 bit address mode.
2044 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2046 * sh-dis.c: Reindent. Rename local variable fprintf to
2049 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2051 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2053 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2055 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2057 * mips16-opc.c (mip16_opcodes): same.
2059 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2061 * m68k-opc.c (moveb): Change $d to %d.
2063 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2065 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2066 (twobyte_has_modrm): Likewise.
2068 (OP_MMX, OP_EM, OP_MS): New static functions.
2070 * i386-dis.c: Revert patch of April 4. The output now matches
2073 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2075 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2078 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2082 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2084 * Makefile.in (install): Depend upon installdirs.
2085 (installdirs): New target.
2087 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2089 From Thomas Graichen <graichen@rzpd.de>:
2090 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2091 * configure: Rebuild.
2093 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2095 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2096 Delete string{,s}.h support.
2098 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2100 * cgen-asm.c (cgen_parse_operand_fn): New global.
2101 (cgen_parse_{{,un}signed_integer,address}): Update call to
2102 cgen_parse_operand_fn.
2103 (cgen_init_parse_operand): New function.
2104 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2105 from cgen_asm_init_parse.
2106 (m32r_cgen_assemble_insn): New operand `errmsg'.
2107 Delete call to as_bad, return error message to caller.
2108 (m32r_cgen_asm_hash_keywords): #if 0 out.
2110 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2112 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2114 [case 'J']: Fix typo in register name.
2116 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2118 * configure.in: Substitute SHLIB_LIBS.
2119 * configure: Rebuild.
2120 * Makefile.in (SHLIB_LIBS): New variable.
2121 ($(SHLIB)): Use $(SHLIB_LIBS).
2123 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2125 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2127 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2129 * disassemble.c (disassembler): Handle m32r.
2131 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2133 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2134 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2135 * Makefile.in (CFILES): Add them.
2136 (ALL_MACHINES): Add them.
2137 (dependencies): Regenerate.
2138 * configure.in (cgen_files): New variable.
2139 (bfd_m32r_arch): Add entry.
2140 * configure: Regenerate.
2142 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2144 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2145 * configure: Rebuild.
2147 * Makefile.in: Rebuild dependencies.
2149 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2151 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2154 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2156 * Branched binutils 2.8.
2158 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2160 * m10200-dis.c: Rename from mn10200-dis.c.
2161 * m10200-opc.c: Rename from mn10200-opc.c.
2162 * m10300-dis.c: Rename from mn10300-dis.c
2163 * m10300-opc.c: Rename from mn10300-opc.c.
2164 * Makefile.in: Update accordingly.
2166 * mips16-opc.c: Add mul and dmul macros.
2168 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2170 * makefile.vms: Update CFLAGS, add clean target.
2172 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2174 * mips-opc.c: Add "wait". From Ralf Baechle
2175 <ralf@gnu.ai.mit.edu>.
2177 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2178 * configure, config.in: Rebuild.
2179 * sysdep.h: Include <stdlib.h> if it exists.
2180 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2182 * Makefile.in: Rebuild dependencies.
2184 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2186 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2187 Andrew Bray <andy@madhouse.demon.co.uk>.
2189 * mips-opc.c: Add cast when setting mips_opcodes.
2191 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2193 * v850-dis.c (disassemble): Fix sign extension problem.
2194 * v850-opc.c (extract_d*): Fix sign extension problems to make
2195 disassembly calculate branch offsets correctly.
2197 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2201 * mips-opc.c: Add dctr and dctw.
2203 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2205 * d30v-dis.c (print_insn): Change the way signed constants
2208 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * Makefile.in (BFD_H): New variable.
2211 (HFILES): New variable.
2212 (CFILES): Add all C files.
2213 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2214 Delete old dependencies, and build new ones.
2215 * dep-in.sed: New file.
2217 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2219 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2221 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2223 * mn10200-opc.c: Change "trap" to "syscall".
2224 * mn10300-opc.c: Add new "syscall" instruction.
2226 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2228 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2229 mulul insns on the coldfire.
2231 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2233 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2234 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2235 (print_insn_little_arm): Likewise.
2237 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2239 Based on patches from H.J. Lu <hjl@lucon.org>:
2240 * i386-dis.c (fetch_data): Add prototype.
2241 * m68k-dis.c (fetch_data): Add prototype.
2242 (dummy_print_address): Add prototype. Make static.
2243 * ppc-opc.c (valid_bo): Add prototype.
2244 * sparc-dis.c (build_hash_table): Add prototype.
2245 (is_delayed_branch, compute_arch_mask): Add prototypes.
2246 (print_insn_sparc): Make several local variables const.
2247 (compare_opcodes): Change arguments to const PTR. Add prototype.
2248 * sparc-opc.c (arg): Change name field to be const.
2249 (lookup_name, lookup_value): Add prototypes. Change table and
2250 name parameters to be const.
2251 (sparc_encode_asi): Change name parameter to be const.
2252 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2253 (sparc_encode_sparclet_cpreg): Likewise.
2254 (sparc_decode_asi): Change return type to be const.
2255 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2256 (sparc_decode_sparclet_cpreg): Likewise.
2258 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2260 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2261 Solaris doesn't like the combined options, and the -f is
2263 (stamp-tshlink, install): Likewise.
2265 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2267 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2270 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2272 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2274 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2276 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2279 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2281 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2283 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2285 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2287 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2289 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2291 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2293 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2294 floatformat_to_double to make portable.
2295 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2298 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2300 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2301 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2303 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2305 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2306 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2308 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2310 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2311 (OFF_SL_BR_SCALED): ... to this, and added the flag
2312 TIC80_OPERAND_BASEREL to the flags word.
2313 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2316 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2318 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2319 Change mips_opcodes from const array to a pointer,
2320 and change bfd_mips_num_opcodes from const int to int,
2321 so that we can increase the size of the mips opcodes table
2324 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2326 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2327 store BITNUM values in the table in one's complement form
2328 to match behavior when assembler is given a raw numeric
2329 value for a BITNUM operand.
2330 * tic80-dis.c (print_operand_bitnum): Ditto.
2332 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2334 * d30v-opc.c: Removed references to FLAG_X.
2336 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2338 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2340 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2342 * Makefile.in: Added d30v object files.
2343 * configure: (bfd_d30v_arch) Rebuilt.
2344 * configure.in: (bfd_d30v_arch) Added new case.
2345 * d30v-dis.c: New file.
2346 * d30v-opc.c: New file.
2347 * disassemble.c (disassembler) Add entry for d30v.
2349 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2351 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2352 representations for the floating point BITNUM values.
2354 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2357 in the table in one's complement form, as they appear in the
2359 (tic80_symbol_to_value): Use macros to access predefined
2361 (tic80_value_to_symbol): Ditto.
2362 (tic80_next_predefined_symbol): New function.
2363 * tic80-dis.c (print_operand_bitnum): Remove code that did
2364 one's complement for BITNUM values.
2366 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2368 * makefile.vms: Remove 8 bit characters. Update to latest
2371 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2373 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2375 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2377 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2378 (IMM24_PCREL): Likewise.
2380 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2382 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2383 address for an extended PC relative instruction that is not a
2386 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2388 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2391 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2394 (tic80_opcodes): Sort entries so that long immediate forms
2395 come after short immediate forms, making it easier for
2396 assembler to select the right one for a given operand.
2398 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2402 (print_insn_mips16): Likewise.
2404 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2406 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2407 a symbol class that restricts translation to just that
2408 class (general register, condition code, etc).
2410 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2412 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2413 and REG_DEST_E for register operands that have to be
2414 an even numbered register. Add REG_FPA for operands that
2415 are one of the floating point accumulator registers.
2416 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2417 (tic80_opcodes): Change entries that need even numbered
2418 register operands to use the new operand table entries.
2419 Add "or" entries that are identical to "or.tt" entries.
2421 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2423 * mips16-opc.c: Add new cases of exit instruction for
2425 * mips-dis.c (print_mips16_insn_arg): Display floating point
2426 registers in operands of exit instruction. Print `$' before
2427 register names in operands of entry and exit instructions.
2429 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2431 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2432 pairs for all predefined symbols recognized by the assembler.
2433 Also used by the disassembling routines.
2434 (tic80_symbol_to_value): New function.
2435 (tic80_value_to_symbol): New function.
2436 * tic80-dis.c (print_operand_control_register,
2437 print_operand_condition_code, print_operand_bitnum):
2438 Remove private tables and use tic80_value_to_symbol function.
2440 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2442 * d10v-dis.c (print_operand): Change address printing
2443 to correctly handle PC wrapping. Fixes PR11490.
2445 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2447 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2450 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2452 * mips-dis.c (print_insn_mips16): Set insn_info information.
2453 (print_mips16_insn_arg): Likewise.
2455 * mips-dis.c (print_insn_mips16): Better handling of an extend
2456 opcode followed by an instruction which can not be extended.
2458 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2460 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2461 coldfire moveb instruction to not allow an address register as
2462 destination. Although the documentation does not indicate that
2463 this is invalid, experiments uncovered unexpected behavior.
2464 Added a comment explaining the situation. Thanks to Andreas
2465 Schwab for pointing this out to me.
2467 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2469 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2470 entries are presorted so that entries with the same mnemonic are
2471 adjacent to each other in the table. Sort the entries for each
2472 instruction so that this is true.
2474 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2476 * m68k-dis.c: Include <libiberty.h>.
2477 (print_insn_m68k): Sort the opcode table on the most significant
2478 nibble of the opcode.
2480 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2482 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2483 "vsub", "vst", "xnor", and "xor" instructions.
2484 (V_a1): Renamed from V_a, msb of accumulator reg number.
2485 (V_a0): Add macro, lsb of accumulator reg number.
2487 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2489 * tic80-dis.c (print_insn_tic80): Broke excessively long
2490 function up into several smaller ones and arranged for
2491 the instruction printing function to be callable recursively
2492 to print vector instructions that have both a load and a
2493 math instruction packed into a single opcode.
2494 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2495 to explain why it comes after the other vector opcodes.
2497 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2499 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2500 move insns to handle immediate operands.
2502 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2504 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2505 fix operand mask in the "moveml" entries for the coldfire.
2507 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2509 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2510 New macros for building vector instruction opcodes.
2511 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2512 FMT_LI, which were unused. The field is now a flags field.
2513 Remove some opcodes that are possible, but illegal, such
2514 as long immediate instructions with doubles for immediate
2515 values. Add "vadd" and "vld" instructions.
2517 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2520 the order more logical. Move the shift alias instructions ("rotl",
2521 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2522 interspersed with the regular sr.x and sl.x instructions. Add
2523 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2524 "sub", "subu", "swcr", and "trap".
2526 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2528 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2529 (OFF_SL_PC): Renamed from OFF_SL.
2530 (OFF_SS_BR): New operand type for base relative operand.
2531 (OFF_SL_BR): New operand type for base relative operand.
2532 (REG_BASE): New operand type for base register operand.
2533 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2534 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2535 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2537 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2538 10 char field, padded with spaces on rhs, rather than a string
2539 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2540 than old TIC80_OPERAND_RELATIVE. Add support for new
2541 TIC80_OPERAND_BASEREL flag bit.
2543 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2545 * tic80-dis.c (print_insn_tic80): Print floating point operands
2547 * tic80-opc.c (SPFI): Add single precision floating point
2548 immediate operand type.
2549 (ROTATE): Add rotate operand type for shifts.
2550 (ENDMASK): Add for shifts.
2551 (n): Macro for the 'n' bit.
2552 (i): Macro for the 'i' bit.
2553 (PD): Macro for the 'PD' field.
2554 (P2): Macro for the 'P2' field.
2555 (P1): Macro for the 'P1' field.
2556 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2559 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2561 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2562 adding in current address for pc-relative operands.
2564 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2566 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2567 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2568 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2569 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2570 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2571 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2572 (REG_SCALED, LSI_SCALED): New operand types.
2573 (E): New macro for 'E' bit at bit 27.
2574 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2575 opcodes, including the various size flavors (b,h,w,d) for
2576 the direct load and store instructions.
2578 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2580 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2582 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2583 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2584 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2585 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2586 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2587 masks with "MASK_* & ~M_*" to get the M bit reset.
2588 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2590 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2592 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2593 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2594 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2596 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2597 CC, SICR, and LICR table entries.
2598 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2599 "bcnd", and "brcr" opcodes.
2601 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2603 * ppc-opc.c (powerpc_operands): Make comment match the
2604 actual fields (no shift field).
2605 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2606 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2607 partial implementation, work in progress.
2608 * tic80-opc.c (tic80_operands): Begin construction operands table.
2609 (tic80_opcodes): Continue populating opcodes table and start
2610 filling in the operand indices.
2611 (tic80_num_opcodes): Add this.
2613 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2615 * m68k-opc.c: Add #B case for moveq.
2617 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2619 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2620 before they are used.
2622 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2624 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2625 for "breakpoint" instruction.
2627 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2629 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2630 (dep): Use ALL_CFLAGS rather than CFLAGS.
2632 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2634 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2637 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2639 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2640 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2642 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2644 * mips16-opc.c: Add "abs".
2646 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2648 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2649 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2650 (disassembler): Add bfd_arch_tic80 support to set disassemble
2651 to print_insn_tic80.
2652 * tic80-dis.c (print_insn_tic80): Add stub.
2654 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2656 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2657 * configure: Regenerate with autoconf.
2658 * tic80-dis.c: Add file.
2659 * tic80-opc.c: Add file.
2661 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2663 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2665 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2667 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2668 (mn10200_opcodes): Use it for some logicals and btst insns.
2669 Add "break" and "trap" instructions.
2671 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2673 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2675 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2677 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2678 relative load or add now depends upon whether the instruction is
2681 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2683 * mn10200-dis.c: Finish writing disassembler.
2684 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2685 Fix mask for "jmp (an)".
2687 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2688 handle endianness issues for mn10300.
2690 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2692 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2694 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2695 instruction. Fix opcode field for "movb (imm24),dn".
2697 * mn10200-opc.c (mn10200_operands): Fix insertion position
2700 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2702 * mn10200-opc.c: Create mn10200 opcode table.
2703 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2704 but moving along nicely.
2706 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2708 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2710 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2712 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2713 specifiers for fmovem* instructions.
2715 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2717 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2719 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2721 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2724 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2726 * mn10300-opc.c: Add some comments explaining the various
2729 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2731 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2733 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2736 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2737 operand specifiers in fmovm* instructions.
2739 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2741 * ppc-opc.c (insert_li): Give an error if the offset has the two
2742 least significant bits set.
2744 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * mips-dis.c (print_insn_mips16): Separate the instruction from
2747 the arguments with a tab, not a space.
2749 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2754 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2757 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2759 * configure: Rebuild with autoconf 2.12.
2761 Add support for mips16 (16 bit MIPS implementation):
2762 * mips16-opc.c: New file.
2763 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2764 (mips16_reg_names): New static array.
2765 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2766 after seeing a 16 bit symbol.
2767 (print_insn_little_mips): Likewise.
2768 (print_insn_mips16): New static function.
2769 (print_mips16_insn_arg): New static function.
2770 * mips-opc.c: Add jalx instruction.
2771 * Makefile.in (mips16-opc.o): New target.
2772 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2773 * configure: Rebuild.
2775 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2777 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2778 operand specifiers in *save, *restore and movem* instructions.
2780 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2783 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2784 register operands for immediate arithmetic, not, neg, negx, and
2785 set according to condition instructions.
2787 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2788 specifier of the effective-address operand in immediate forms of
2789 arithmetic instructions. The specifier for the immediate operand
2790 notes how and where the constant will be stored.
2792 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2794 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2797 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2800 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2802 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2804 * mn10300-dis.c (disassemble): Handle register lists.
2806 * mn10300-opc.c: Fix handling of register list operand for
2807 "call", "ret", and "rets" instructions.
2809 * mn10300-dis.c (disassemble): Print PC-relative and memory
2810 addresses symbolically if possible.
2811 * mn10300-opc.c: Distinguish between absolute memory addresses,
2812 pc-relative offsets & random immediates.
2814 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2816 (disassemble): Handle SPLIT and EXTENDED operands.
2818 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2820 * mn10300-dis.c: Rough cut at printing some operands.
2822 * mn10300-dis.c: Start working on disassembler support.
2823 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2825 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2827 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2829 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2831 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2833 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2835 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2836 register argument is calls and jmp instructions.
2838 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2840 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2841 getx operand. Fix opcode for mulqu imm,dn.
2843 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2845 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2846 in MN10300_OPERAND_SPLIT operands for how many bits
2847 appear in the basic insn word. Add IMM32_HIGH24,
2848 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2849 (mn10300_opcodes): Use new operands as needed.
2851 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2852 for bset, bclr, btst instructions.
2853 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2855 * mn10300-opc.c (mn10300_operands): Remove many redundant
2856 operands. Update opcode table as appropriate.
2857 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2858 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2860 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2862 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2863 operands (for indexed load/stores). Fix bitpos for DI
2864 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2865 few instructions that insert immediates/displacements in the
2866 middle of the instruction. Add IMM8E for 8 bit immediate in
2867 the extended part of an instruction.
2868 (mn10300_operands): Use new opcodes as appropriate.
2870 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2872 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2873 sequential so the assembler never parallelizes it with
2876 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2878 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2879 a data/address register that appears in register field 0
2880 and register field 1.
2881 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2883 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2885 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2886 standard disassembly.
2888 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2889 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2890 Recategorize PALcode instructions.
2892 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2894 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2896 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2898 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2899 there are no operand types.
2901 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2903 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2905 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2907 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2909 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2911 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2913 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2914 and sst.w instructions.
2916 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2919 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2921 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2924 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2926 * ppc-opc.c (PPCPWR2): Define.
2927 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2930 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2932 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2933 field for movhu instruction.
2935 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2936 cast value to "long" not "signed long" to keep hpux10
2939 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2941 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2944 * mn10300-opc.c (FMT*): Remove definitions.
2946 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2947 for shift-by-register opcodes.
2949 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2950 into [AD][MN][01] for encoding the position of the register
2953 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2955 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2956 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2958 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2961 Fix various typos. Add "PAREN" operand.
2962 (MEM, MEM2): Define.
2963 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2964 operands. Fix several typos.
2966 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2969 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2972 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2974 (mn10300_opcodes): Break opcode format out into its own field.
2975 Update many operand fields to deal with signed vs unsigned
2976 issues. Fix one or two typos in the "mov" instruction
2977 opcode, mask and/or operand fields.
2979 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2981 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2982 m68851 wasn't reset.
2984 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2986 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2987 all opcodes. Very rough cut at operands for all opcodes.
2989 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2992 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10200-opc.c, mn10300-opc.c: New files.
2995 * mn10200-dis.c, mn10300-dis.c: New files.
2996 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2997 * disassemble.c: Break mn10x00 support into 10200 and 10300
2999 * configure.in: Likewise.
3000 * configure: Rebuilt.
3002 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3004 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3006 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3008 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3010 * disassemble (ARCH_mn10x00): Define.
3011 (disassembler): Handle bfd_arch_mn10x00.
3012 * configure.in: Recognize bfd_mn10x00_arch.
3013 * configure: Rebuilt.
3015 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3017 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3018 accordingly. Don't declare functions using op_rtn.
3020 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3022 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3023 params to be more standard.
3024 * (disassemble): Print absolute addresses and symbolic names for
3025 branch and jump targets.
3026 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3028 * (v850_opcodes): Add breakpoint insn.
3030 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3032 * m68k-opc.c: Move the fmovemx data register cases before the
3033 other cases, so that they get recognized before the data register
3034 does gets treated as a degenerate register list.
3036 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3038 * mips-opc.c: Add a case for "div" and "divu" with two registers
3039 and a destination of $0.
3041 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3043 * mips-dis.c (print_insn_arg): Add prototype.
3044 (_print_insn_mips): Ditto.
3046 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3048 * mips-dis.c (print_insn_arg): Print condition code registers as
3051 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3053 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3055 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3057 * v850-dis.c (disassemble): Make static. Provide prototype.
3059 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3061 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3064 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3066 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3067 ']' characters into the output stream.
3068 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3069 Add "memop" field to all opcodes (for the disassembler).
3070 Reorder opcodes so that "nop" comes before "mov" and "jr"
3071 comes before "jarl".
3073 * v850-dis.c (print_insn_v850): Fix typo in last change.
3075 * v850-dis.c (print_insn_v850): Properly handle disassembling
3076 a two byte insn at the end of a memory region when the memory
3077 region's size is only two byte aligned.
3079 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3081 * v850-dis.c (v850_reg_names): Define.
3082 (v850_sreg_names, v850_cc_names): Likewise.
3083 (disassemble): Very rough cut at printing operands (unformatted).
3085 * v850-opc.c (BOP_MASK): Fix.
3086 (v850_opcodes): Fix mask for jarl and jr.
3088 * v850-dis.c: New file. Skeleton for disassembler support.
3089 * Makefile.in Remove v850 references, they're not needed here.
3090 * configure.in: Add v850-dis.o when building v850 toolchains.
3091 * configure: Rebuilt.
3092 * disassemble.c (disassembler): Call v850 disassembler.
3094 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3095 (insert_d8_6, extract_d8_6): New functions.
3096 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3097 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3099 (IF4A, IF4B): Use "D7" instead of "D7S".
3100 (IF4C, IF4D): Use "D8_7" instead of "D8".
3101 (IF4E, IF4F): New. Use "D8_6".
3102 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3103 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3105 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3106 (v850_operands): Change D16 to D16_15, use special insert/extract
3107 routines. New new D16 that uses the generic insert/extract code.
3108 (IF7A, IF7B): Use D16_15.
3109 (IF7C, IF7D): New. Use D16.
3110 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3112 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3113 message. Issue an error if the branch offset is odd.
3115 * v850-opc.c: Add notes about needing special insert/extract
3116 for all the load/store insns, except "ld.b" and "st.b".
3118 * v850-opc.c (insert_d22, extract_d22): New functions.
3119 (v850_operands): Use insert_d22 and extract_d22 for
3121 (insert_d9): Fix range check.
3123 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3125 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3126 and set bits field to D9 and D22 operands.
3128 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3130 * v850-opc.c (v850_operands): Define SR2 operand.
3131 (v850_opcodes): "ldsr" uses R1,SR2.
3133 * v850-opc.c (v850_opcodes): Fix opcode specs for
3134 sld.w, sst.b, sst.h, sst.w, and nop.
3136 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3138 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3139 end of the opcode table.
3141 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3143 * d10v-opc.c (pre_defined_registers): Added register pairs,
3144 "r0-r1", "r2-r3", etc.
3146 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3148 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3149 Create I16U for an unsigned 16bit mmediate operand.
3150 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3152 * v850-opc.c (v850_operands): Define EP operand.
3153 (IF4A, IF4B, IF4C, IF4D): Use EP.
3155 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3156 with immediate operand, "movhi". Tweak "ldsr".
3158 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3159 correct. Get sld.[bhw] and sst.[bhw] closer.
3161 * v850-opc.c (v850_operands): "not" is a two byte insn
3163 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3165 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3167 * v850-opc.c (two): Get order of words correct.
3169 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3171 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3172 register source and destination operands.
3173 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3175 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3176 same thinko in "trap" opcode.
3178 * v850-opc.c (v850_opcodes): Add initializer for size field
3181 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3182 Add D8 for 8-bit unsigned field in short load/store insns.
3183 (IF4A, IF4D): These both need two registers.
3184 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3185 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3186 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3187 for "ldsr" and "stsr".
3188 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3191 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3192 short store word (sst.w).
3194 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3196 * v850-opc.c (v850_operands): Added insert and extract fields,
3197 pointers to functions that handle unusual operand encodings.
3199 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3201 * v850-opc.c (v850_opcodes): Enable "trap".
3203 * v850-opc.c (v850_opcodes): Fix order of displacement
3204 and register for "set1", "clr1", "not1", and "tst1".
3206 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3208 * v850-opc.c (v850_operands): Add "B3" support.
3209 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3212 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3214 * v850-opc.c: Close unterminated comment.
3216 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3218 * v850-opc.c (v850_operands): Add flags field.
3219 (v850_opcodes): add move opcodes.
3221 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3223 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3224 * configure: (bfd_v850v_arch) Add new case.
3225 * configure.in: (bfd_v850_arch) Add new case.
3226 * v850-opc.c: New file.
3228 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3230 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3232 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3234 * d10v-opc.c: Add additional information to the opcode
3235 table to help determinine which instructions can be done
3238 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3240 * mpw-make.sed: Update editing of include pathnames to be
3243 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3245 * arm-opc.h: Added "bx" instruction definition.
3247 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3249 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3251 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3253 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3255 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3257 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3259 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3261 * makefile.vms: Update for alpha-opc changes.
3263 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3265 * i386-dis.c (print_insn_i386): Actually return the correct value.
3266 (ONE, OP_ONE): #ifdef out; not used.
3268 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3270 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3271 Changed subi operand type to treat 0 as 16.
3273 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3275 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3278 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3280 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3281 memory transfer instructions. Add new format string entries %h and %s.
3282 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3285 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3287 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3288 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3290 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3292 * alpha-dis.c (print_insn_alpha_osf): Remove.
3293 (print_insn_alpha_vms): Remove.
3294 (print_insn_alpha): Make globally visible. Chose the register
3295 names based on info->flavour.
3296 * disassemble.c: Always return print_insn_alpha for the alpha.
3298 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3300 * d10v-dis.c (dis_long): Handle unknown opcodes.
3302 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3304 * d10v-opc.c: Changes to support signed and unsigned numbers.
3305 All instructions with the same name that have long and short forms
3306 now end in ".l" or ".s". Divs added.
3307 * d10v-dis.c: Changes to support signed and unsigned numbers.
3309 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3311 * d10v-dis.c: Change all functions to use info->print_address_func.
3313 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3315 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3316 move ccr/sr insns more strict so that the disassembler only
3317 selects them when the addressing mode is data register.
3319 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3320 * d10v-opc.c (pre_defined_registers): Declare.
3321 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3322 to pick a better name for the registers.
3324 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3326 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3327 operands for fexpand and fpmerge. From Christian Kuehnke
3328 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3330 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3332 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3333 print routine. Take new regnames and cpumask arguments.
3334 Kill the environment variable nonsense.
3335 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3336 (print_insn_alpha_vms): New function. Do VMS style regnames.
3337 * disassemble.c (disassembler): Test bfd flavour to pick
3338 between OSF and VMS routines. Default to OSF.
3340 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3342 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3343 * configure: Rebuild.
3344 * Makefile.in (install): Use @INSTALL_SHLIB@.
3346 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3348 * configure: (bfd_d10v_arch) Add new case.
3349 * configure.in: (bfd_d10v_arch) Add new case.
3350 * d10v-dis.c: New file.
3351 * d10v-opc.c: New file.
3352 * disassemble.c (disassembler) Add entry for d10v.
3354 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3356 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3357 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3359 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3361 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3362 distinguish between variants of the instruction set.
3363 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3364 distinguish between variants of the instruction set.
3366 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3368 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3369 the 8086 instruction set.
3370 * i386-dis.c: General cleanups. Make most things static. Add
3371 prototypes. Get rid of static variables aflags and dflags. Pass
3372 them as args (to almost everything).
3374 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3376 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3378 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3380 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3381 if the next arg is marked with SRC_IN_DST. Gross.
3383 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3384 we're looking for and find EXR.
3386 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3387 if we're looking for KBIT and we don't find it.
3389 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3392 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3393 3bit immediate operands.
3395 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3397 * Released binutils 2.7.
3399 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3400 <kkaempf@progis.ac-net.de>.
3402 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3404 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3406 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3408 * sparc-dis.c (print_insn_sparclite): New routine to print
3409 sparclite instructions.
3411 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3413 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3415 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3417 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3418 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3419 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3421 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3423 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3424 Use autoconf-set values.
3425 (docdir, oldincludedir): Removed.
3426 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3428 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3430 * alpha-opc.c: New file.
3431 * alpha-opc.h: Remove.
3432 * alpha-dis.c: Complete rewrite to use new opcode table.
3433 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3434 * configure: Rebuild with autoconf 2.10.
3435 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3436 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3438 (alpha-opc.o): New target.
3440 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3442 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3443 Set imm_added_to_rs1 even if the source and destination register
3446 * sparc-opc.c: Add some two operand forms of the wr instruction.
3448 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3450 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3453 * disassemble.c (disassembler): Handle H8/S.
3454 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3456 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3458 * sparc-opc.c: Add beq/teq as aliases for be/te.
3460 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3461 <sergei@msil.sps.mot.com>.
3463 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3465 * makefile.vms: New file.
3467 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3469 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3474 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3476 * i386-dis.c (OP_OFF): Call append_prefix.
3478 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3480 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3481 unsigned long to silence a warning from the Solaris PowerPC
3484 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3486 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3488 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3490 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3492 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3493 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3494 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3495 cpush, cpusha, cpull sparclet insns.
3497 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3499 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3501 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3503 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3504 Set F_FLOAT on other floating point instructions.
3506 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3508 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3510 (powerpc_opcodes): Add 860/821 specific SPRs.
3512 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3514 * configure.in: Permit --enable-shared to specify a list of
3515 directories. Set and substitute BFD_PICLIST.
3516 * configure: Rebuild.
3517 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3518 uses. Set to @BFD_PICLIST@.
3520 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3522 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3523 not "abs", which may be needed for the absolute in something
3524 like btst #0,@10:8. Print L_3 immediates separately from other
3525 immediates. Change ABSMOV reference to ABS8MEM.
3527 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3529 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3530 (current_arch_mask): New static global.
3531 (compute_arch_mask): New static function.
3532 (print_insn_sparc): Delete sparc_v9_p. New static local
3533 current_mach. Resort opcode table if current_mach changes.
3534 Generalize "insn not supported" test.
3535 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3536 Delete test for v9/!v9.
3537 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3539 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3540 (brfcx): Renamed to FBRX.
3541 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3542 coprocessor mnemonics are not supported on the sparclet).
3543 (condf): Renamed to CONDF.
3544 (SLCBCC2): Delete F_ALIAS flag.
3546 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3548 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3549 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3551 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3553 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3554 that the shared library version number is set correctly.
3556 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3559 Miles Bader <miles@gnu.ai.mit.edu>.
3560 * configure: Rebuild.
3562 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3564 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3567 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3569 * configure: Rebuild with autoconf 2.8.
3571 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3573 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3574 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3576 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3579 since they appear as targets in Makefile.in.
3580 * configure: Rebuild.
3582 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3584 * mpw-make.sed: Edit out shared library support bits.
3586 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3588 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3589 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3590 (sparc_opcodes): Add sparclet insns.
3591 (sparclet_cpreg_table): New static local.
3592 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3593 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3595 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3597 * i386-dis.c (index16): New static variable.
3598 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3600 (OP_indirE): Return result of OP_E.
3601 (OP_E): Check for 16 bit addressing mode, and disassemble
3602 correctly. Optimised 32 bit case a little. Don't print
3603 "(base,index,scale)" when sib specifies only an offset.
3605 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3607 * configure.in: Set and substitute SHLIB_DEP.
3608 * configure: Rebuild.
3609 * Makefile.in (SHLIB_DEP): New variable.
3610 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3611 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3612 COMMON_SHLIB, add them to piclist with appropriate modifications.
3613 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3614 here: just use piclist.
3616 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3618 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3619 (print_insn_sparc): Rewrite v9/not-v9 tests.
3620 (compare_opcodes): Likewise.
3621 * sparc-opc.c (MASK_<ARCH>): Define.
3622 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3623 (sparclet,v6notv9): Define.
3624 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3625 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3627 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3629 * configure.in: Call AC_PROG_CC before configure.host.
3630 * configure: Rebuild.
3632 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3634 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3636 * i386-dis.c (onebyte_has_modrm): New static array.
3637 (twobyte_has_modrm): New static array.
3638 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3640 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3642 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3645 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3647 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3650 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3652 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3653 m68010up, not just m68020up | cpu32.
3655 * Makefile.in (SONAME): New variable.
3656 ($(SHLINK)): Make a link to the transformed name, as well.
3657 (stamp-tshlink): New target.
3658 (install): Skip stamp-tshlink during install.
3660 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3662 * configure.in: Call AC_ARG_PROGRAM.
3663 * configure: Rebuild.
3664 * Makefile.in (program_transform_name): New variable.
3665 (install): Transform library name before installing it.
3667 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3669 * i960-dis.c (mem): Add HX dcinva instruction.
3671 Support for building as a shared library, based on patches from
3672 Alan Modra <alan@spri.levels.unisa.edu.au>:
3673 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3674 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3675 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3676 * configure: Rebuild.
3677 * Makefile.in (ALLLIBS): New variable.
3678 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3679 (COMMON_SHLIB, SHLINK): New variables.
3680 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3681 (STAGESTUFF): Remove variable.
3682 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3683 (stamp-piclist, piclist): New targets.
3684 ($(SHLIB), $(SHLINK)): New targets.
3685 ($(OFILES)): Depend upon stamp-picdir.
3686 (disassemble.o): Build twice if PICFLAG is set.
3687 (MOSTLYCLEAN): Add pic/*.o.
3688 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3689 (distclean): Remove pic and stamp-picdir.
3690 (install): Install shared libraries.
3691 (stamp-picdir): New target.
3693 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3695 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3696 Print unknown instruction as "unknown", rather than in hex.
3698 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3700 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3702 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3704 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3706 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3709 when necessary. From Ulrich Drepper
3710 <drepper@myware.rz.uni-karlsruhe.de>.
3712 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3714 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3715 sparc_num_opcodes. Update architecture enum values.
3716 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3717 (sparc_opcode_lookup_arch): New function.
3718 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3719 (sparc_opcodes): Add v9a shutdown insn.
3721 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3723 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3724 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3726 (print_insn_sparc64): Deleted.
3727 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3730 * sparc-opc.c (architecture_pname): Add v9a.
3732 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3734 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3735 incorrectly defined as 0x16 when it should be 0x15.
3736 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3737 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3738 excb (exception barrier) which is defined in the Alpha
3739 Architecture Handbook version 2.
3740 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3741 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3742 disassembled as or, for example.
3744 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3746 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3747 (_print_insn_mips): Change i from int to unsigned int.
3749 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3751 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3752 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3754 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3756 * i386-dis.c: Added Pentium Pro instructions.
3758 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3760 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3763 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3765 * sh-opc.h (sh_nibble_type): Added REG_B.
3766 (sh_arg_type): Added A_REG_B.
3767 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3769 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3771 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3773 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3775 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3777 * Makefile.in (distclean): Remove stamp-h. From Ronald
3778 F. Guilmette <rfg@monkeys.com>.
3780 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3782 From David Mosberger-Tang <davidm@azstarnet.com>:
3783 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3786 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3788 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3789 (sh_table): Added many SH3 opcodes.
3790 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3792 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3794 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3795 (subco,subco.): Mark this PPC, not PPCCOM.
3797 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3799 * configure: Rebuild with autoconf 2.7.
3801 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3803 * configure: Rebuild with autoconf 2.6.
3805 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3807 * configure.in: Sort list of architectures. Accept but do nothing
3808 for alliant, convex, pyramid, romp, and tahoe.
3810 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3812 * a29k-dis.c (print_special): Change num to unsigned int.
3814 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3816 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3819 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3821 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3822 * configure: Rebuilt.
3824 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3826 * configure.in: Add case for bfd_i860_arch.
3827 * configure: Rebuild.
3829 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3831 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3832 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3833 (NEXTDOUBLE): Likewise.
3834 (print_insn_m68k): Don't match fmoveml if there is more than one
3835 register in the list.
3836 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3838 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3840 * m68k-opc.c: Use #W rather than #w.
3841 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3843 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3845 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3846 and likewise for all the dbxx opcodes.
3848 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3850 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3852 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3854 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3855 the VR4100 specific instructions to the mips_opcodes structure.
3857 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3859 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3860 ugly Metrowerks bug in CW6, is fixed in CW7.
3862 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3864 * ppc-opc.c (whole file): Add flags for common/any support.
3866 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3868 * Makefile.in (BISON): Remove macro.
3869 (FLAGS_TO_PASS): Remove BISON.
3871 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3873 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3875 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3876 instructions that take no args by looking at the match mask.
3877 (print_insn_arg): Always print "%" before register names.
3878 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3879 [case '_']: Don't print "@#" before address.
3880 [case 'J']: Use "%s" as format string, not register name.
3881 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3883 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3885 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3888 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3890 From David Mosberger-Tang <davidm@azstarnet.com>
3892 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3893 (alpha_insn_set): added definitions for VAX floating point
3894 instructions (Unix compilers don't generate these, but handcoded
3895 assembly might still use them).
3897 * alpha-dis.c (print_insn_alpha): added support for disassembling
3898 the miscellaneous instructions in the Alpha instruction set.
3900 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3902 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3903 no longer create sysdep.h, sed ppc-opc.c to work around a
3904 serious Metrowerks C bug.
3905 * mpw-make.in: Remove.
3906 * mpw-make.sed: New file, used by mpw-configure to edit
3907 Makefile.in into an MPW makefile.
3909 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3911 * Makefile.in (maintainer-clean): New synonym for realclean.
3913 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3915 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3916 which use '0', '1', and '2' instead. Specify the proper size for
3917 a pmove immediate operand. Correct the pmovefd patterns to be
3918 moves to a register, not from a register.
3919 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3921 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3923 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3924 %psr, %wim, %tbr as F_NOTV9.
3926 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3928 * Makefile.in (Makefile): Just rebuild Makefile when running
3930 (config.h, stamp-h): New targets.
3931 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3932 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3933 rebuilding config.h.
3934 * configure: Rebuild.
3936 * mips-opc.c: Change unaligned loads and stores with "t,A"
3937 operands to use "t,A(b)".
3939 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3941 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3943 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3945 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3946 until 3 instead of until 2.
3948 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3950 * Makefile.in (ALL_CFLAGS): Define.
3951 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3952 (MOSTLYCLEAN): Add config.log.
3953 (distclean): Don't remove config.log.
3954 * configure.in: Substitute HDEFINES.
3955 * configure: Rebuild.
3957 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3959 * sh-opc.h (sh_arg_type): Add F_FR0.
3960 (sh_table, case fmac): Add F_FR0 as first argument.
3962 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3964 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3966 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3968 * sparc-dis.c: Remove all references to NO_V9.
3970 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3972 * aclocal.m4: Just include ../bfd/aclocal.m4.
3973 * configure: Rebuild.
3975 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3977 * sparc-dis.c (X_DISP19): Define.
3978 (print_insn, case 'G'): Use it.
3979 (print_insn, case 'L'): Sign extend displacement.
3981 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3983 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3984 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3985 host_makefile_frag or frags.
3986 * aclocal.m4: New file.
3987 * configure: Rebuild.
3988 * Makefile.in (INSTALL): Set to @INSTALL@.
3989 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3990 (INSTALL_DATA): Set to @INSTALL_DATA@.
3992 (AR_FLAGS): Set to rc rather than qc.
3993 (CC): Define as @CC@.
3994 (CFLAGS): Set to @CFLAGS@.
3995 (@host_makefile_frag@): Remove.
3996 (config.status): Remove dependency upon @frags@.
3998 * configure.in: ../bfd/config.bfd now just sets shell variables.
3999 Use them rather than looking through target Makefile fragments.
4000 * configure: Rebuild.
4002 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4004 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4006 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4008 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4009 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4012 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4013 (lookup_{name,value}): New functions.
4014 (prefetch_table): New static local.
4015 (sparc_{encode,decode}_prefetch): New functions.
4016 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4018 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4020 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4023 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4025 * sh-dis.c: Correct comment on first line of file.
4027 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4029 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4031 * sparc-opc.c (asi, membar): New static locals.
4032 (sparc_{encode,decode}_{asi,membar}): New functions.
4033 (sparc_opcodes, membar insn): Fix.
4034 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4035 Support decoding of membar masks.
4038 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4040 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4042 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4045 and likewise for the other branches. Add bhs as an alias for bcc,
4046 and likewise for the size variants. Add dbhs as an alias for
4049 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4051 * sh-opc.h (FP sts instructions): Update to match reality.
4053 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4055 * m68k-dis.c: (fpcr_names): Add % before all register names.
4056 (reg_names): Likewise.
4057 (print_insn_arg): Don't explicitly print % before register names.
4058 Add % before register names in static array names. In case 'r',
4059 print data registers as `@(Dn)', not `Dn@'. When printing a
4060 memory address, don't print @# before it.
4061 (print_indexed): Change base_disp and outer_disp from int to
4062 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4063 syntax. Sign extend 8 byte displacement correctly.
4064 (print_base): Print using MIT syntax. Print zpc when appropriate.
4065 Change parameter disp from int to bfd_vma.
4067 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4070 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4072 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4073 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4074 * sh-opc.h (sh_arg_type): Add new operand types.
4075 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4077 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4079 * Makefile.in (distclean): Remove generated file config.h.
4081 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4083 * Makefile.in (distclean): Remove generated file config.h.
4085 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4087 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4089 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4091 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4092 rather than numopcodes. Use m68k_opcodes rather than removed
4093 opcode function. Don't check F_ALIAS.
4094 (print_insn_arg): Change first parameter to be const char *.
4095 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4096 (m68k-opc.o): New target.
4097 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4098 * configure: Rebuild.
4100 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4102 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4103 (opcode_bits, opcode_hash_table): New variables.
4104 (opcodes_initialized): Renamed from opcodes_sorted.
4105 (build_hash_table): New function.
4106 (is_delayed_branch): Use hash table.
4107 (print_insn): Renamed from print_insn_sparc, made static.
4108 Build and use hash table. If !sparc64, ignore sparc64 insns,
4109 and vice-versa if sparc64.
4110 (print_insn_sparc, print_insn_sparc64): New functions.
4111 (compare_opcodes): Move sparc64 opcodes to end.
4112 Print commutative insns with constant second.
4113 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4115 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4117 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4118 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4119 avoids printing a delay slot in a delay slot.
4120 * sh-opc.h (sh_table): Fully bracket last entry.
4122 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4124 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4126 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4128 * configure.in: Get host_makefile_frag from ${srcdir}.
4130 * configure.in: Autoconfiscated. Check for string[s].h. Create
4131 config.h from config.in. Don't set up sysdep.h link.
4132 * sysdep.h: New file.
4133 * configure, config.in: New files, generated from configure.in.
4134 * Makefile.in: Updated to be processed autoconf-style.
4135 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4136 (Makefile): Depend on config.status.
4137 (config.status): New rule.
4138 * configure.bat: Update Makefile substitutions.
4140 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4142 * mips-opc.c (L1): Define.
4143 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4144 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4147 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4149 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4150 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4151 have multiple add units but only a single logical unit.
4153 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4154 shifted by 18, without any insertion or extraction function.
4155 (insert_cr, extract_cr): Remove.
4157 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4159 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4162 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4164 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4165 * sh-opc.h: Add copyright.
4167 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4169 * Makefile.in (crunch-m68k): Delete extra target accidentally
4170 checked in a while ago.
4172 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4174 * sh-opc.h (sh_table): Add SH3 support.
4176 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4178 * sh-opc.h: Added bsrf and braf.
4180 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4182 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4183 bogus [ls]fm{ea,fd} patterns.
4185 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4186 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4187 initialize it from memory. Make function static.
4188 (print_insn_{big,little}_arm): New functions.
4189 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4190 the correct endianness.
4192 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4194 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4197 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4199 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4200 17th, so that it builds again using GCC as the compiler.
4202 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4204 * mips-dis.c (print_insn_little_mips): Cast return value from
4205 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4206 expects an unsigned long, and that might be fewer words of
4207 argument storage (e.g., if bfd_vma is long long on a 32-bit
4209 (print_insn_big_mips): Likewise with bfd_getb32 value.
4210 (_print_insn_mips): Now static.
4212 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4214 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4215 gcc memory hog problem with initializer is fixed.
4217 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4219 Merge in support for Mac MPW as a host.
4220 (Old change descriptions retained for informational value.)
4222 * mpw-config.in (archname): Compute from the config.
4223 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4225 * mpw-config.in (target_arch): Compute from canonical target.
4226 (m68k, mips, powerpc, sparc): Add architectures.
4227 * mpw-make.in (disassemble.c.o): Add.
4228 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4230 * mpw-config.in (BFD_MACHINES): Set to a default value.
4231 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4233 * mpw-make.in (CSEARCH): Add extra-include to search path.
4235 * mpw-config.in (varargs.h): Don't create.
4236 (sysdep.h): Create using forward-include.
4237 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4239 * mpw-config.in: New file, MPW version of configure.in.
4240 * mpw-make.in: New file, MPW version of Makefile.in.
4242 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4244 * alpha-dis.c (print_insn_alpha): Put empty statement after
4247 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4249 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4250 (low_sign_extend): Likewise.
4251 (get_field): Delete unused function.
4252 (set_field, deposit_14, deposit_21): Likewise.
4254 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4256 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4259 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4261 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4263 * alpha-opc.h (OSF_ASMCODE): define
4264 print pal-code names as defined in App C of the
4265 Alpha Architecture Reference Manual
4267 * alpha-dis.c: cleaned up output
4268 print stylized code forms as defined in App A.4.3 of the
4269 Alpha Architecture Reference Manual
4271 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4273 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4275 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4278 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4280 * m68k-dis.c (opcode): New function. Returns address of opcode
4281 table entry given index, even if the opcode table was split to
4282 work around gcc bugs.
4283 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4285 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4286 (reg_names): Now const.
4287 (print_insn_arg): Arrays cacheFieldName and names now const.
4288 (print_indexed): Array scales now const.
4290 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4292 * ppc-opc.c: Sort recently added instructions by minor opcode
4293 number within major opcode number.
4295 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4297 * hppa-dis.c: Include libhppa.h.
4299 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4301 * mips-opc.c: Change dli to use M_DLI, and add dla.
4303 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4305 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4307 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4309 * mips-opc.c: Add r4650 mul instruction.
4311 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4313 * mips-opc.c: Add uld and usd macros for unaligned double load and
4316 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4318 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4319 mfdcr, mtdcr, icbt, iccci.
4321 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4323 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4324 signed char fields to shorts, more portable.
4326 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4328 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4329 char fields as signed chars, since they may have negative values.
4331 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4333 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4334 (mycroft@netbsd.org).
4336 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4338 From "Logg, Ed" <elogg@ea.com>:
4339 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4340 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4343 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4345 * ppc-opc.c: Changes based on patch from David Edelsohn
4346 <edelsohn@mhpcc.edu>.
4347 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4350 (insert_tbr): New static function.
4351 (extract_tbr): New static function.
4352 (XFXFXM_MASK, XFXM): Define.
4353 (XSPRBAT_MASK, XSPRG_MASK): Define.
4354 (powerpc_opcodes): Add instructions to access special registers by
4355 name. Add mtcr and mftbu.
4357 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4359 * mips-opc.c (P3): Define.
4360 (mips_opcodes): Add mad and madu.
4362 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4364 * configure.in: Add W65 support.
4365 * disassemble.c: Likewise.
4366 * w65-opc.h, w65-dis.c: New files.
4368 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4370 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4373 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4375 * mips-opc.c: Add dli as a synonym for li.
4377 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4379 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4380 print something for reserved opcode values, even if it won't
4383 * mips-dis.c (_print_insn_mips): When initializing, shift right
4384 and mask, to avoid sign extension problems on the Alpha.
4386 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4389 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4391 * sh-opc.h (mov.l gbr): Get direction right.
4392 * sh-dis.c (print_insn_shx): New function.
4393 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4394 print opcodes with right byte order.
4396 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4398 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4399 to avoid conflicts with getopt.
4401 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4403 * hppa-dis.c (print_insn_hppa): Read the instruction using
4404 bfd_getb32, so that it works on a little endian or 64 bit host.
4405 Remove unused local variable op.
4407 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4409 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4410 addu does not work correctly if -mips3.
4412 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4414 * a29k-dis.c (print_special): Add special register names defined
4415 on 29030, 29040 and 29050.
4416 (print_insn): Handle new operand type 'I'.
4418 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4420 * Makefile.in (INSTALL): Use top level install.sh script.
4422 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4424 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4425 that it works on a little endian host.
4427 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4429 * configure.in: Use ${config_shell} when running config.bfd.
4431 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4433 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4435 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4437 * a29k-dis.c (print_insn): Print the opcode.
4439 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4441 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4443 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4445 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4447 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4449 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4450 which store a value into memory.
4452 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4454 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4455 * arm-dis.c, arm-opc.h: New files.
4457 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4459 * Makefile.in (ns32k-dis.o): Add dependency.
4460 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4461 string, not as array of chars.
4463 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4465 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4467 * sparc-opc.c: Added sparclite extended FP operations, and
4468 versions of v9 impdep* instructions permitting specification of
4471 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4473 * i960-dis.c (reg_names): Now const.
4474 (struct sparse_tabent): New type, copied from array type in mem
4476 (ctrl): Local static array ctrl_tab now const.
4477 (cobr): Local static array cobr_tab now const.
4478 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4479 static variable mem_tab no longer explicitly initialized. Changed
4480 mem_init to const array of struct sparse_tabent.
4481 (reg): Local static variable reg_tab no longer explicitly
4482 initialized. Changed reg_init to const array of struct
4484 (ea): Local static array scale_tab now const.
4486 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4489 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4491 * configure.bat: the disassember needs to be enabled for
4492 "objdump -d" to work in djgpp.
4494 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4496 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4497 (invalid_float): Enabled general version, doesn't require running
4498 on ns32k host. Changed to take char* argument, and test for
4499 explicitly specified sizes, instead of using sizeof() on host CPU
4501 (INVALID_FLOAT): Cast first argument.
4502 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4503 list_P032, list_M032): Now const.
4504 (optlist, list_search): Made appropriate arguments now point to
4506 (print_insn_arg): Changed static array of one-character-string
4507 pointers into a static const array of characters; fixed sprintf
4508 statement accordingly.
4510 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4512 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4513 from distribution. A ns32k-dis.c from a previous distribution has
4514 been brought up to date and supports the new interface.
4516 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4518 * configure.in: add bfd_ns32k_arch target support.
4520 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4521 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4523 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4525 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4528 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4530 * h8300-dis.c, mips-dis.c: Don't use true and false.
4532 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4534 * configure.in: Change --with-targets to --enable-targets.
4536 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4538 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4539 opcodes to the first instruction with that opcode, to speed
4540 disassembly of large files. From ralphc@pyramid.com (Ralph
4543 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4545 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4547 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4549 * configure.bat: update to latest makefile.in
4551 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4553 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4554 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4555 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4556 slot insn is in a delay slot.
4557 * z8k-opc.h: (resflg): Fix patterns.
4558 * h8500-opc.h Fix CR insn patterns.
4560 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4562 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4563 "cmpl" before POWER versions, so that gas -many uses them.
4565 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4567 * disassemble.c: New file.
4568 * Makefile.in (OFILES): Add disassemble.o.
4569 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4570 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4571 binutils/configure.in.
4573 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4574 opcode being examined.
4576 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4578 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4579 (insert_ral, insert_ram, insert_ras): New functions.
4580 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4581 RAS for store with update.
4583 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4586 (edelsohn@npac.syr.edu).
4588 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4590 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4593 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4595 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4597 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4599 * ppc-opc.c (powerpc_operands): The signedp field has been
4600 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4601 instead. Add new operand SISIGNOPT.
4602 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4603 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4604 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4607 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4609 * i386-dis.c (struct private): Renamed to dis_private. `private'
4610 is a reserved word for dynix cc.
4612 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4614 * configure.in: Change error message to refer to bfd/config.bfd
4615 rather than bfd/configure.in.
4617 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4619 * ppc-opc.c: Define POWER2 as short alias flag.
4620 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4623 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4625 * i960-dis.c (print_insn_i960): Don't read a second word for
4626 opcodes 0, 1, 2 and 3.
4628 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4630 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4632 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * m68881-ext.c: Removed; no longer used.
4635 * Makefile.in: Changed accordingly.
4637 * m68k-dis.c (ext_format_68881): Don't declare.
4638 (print_insn_m68k): If an instruction uses place 'i', it uses at
4639 least four fixed bytes.
4640 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4641 extended float, convert to double using floatformat_to_double, not
4642 ieee_extended_to_double, and fetch the data before converting it.
4644 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4646 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4647 davidj@ICSI.Berkeley.EDU (David Johnson).
4649 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4651 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4652 PowerPC uses bdnz[l][a].
4654 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4656 * dis-buf.c, i386-dis.c: Include sysdep.h.
4658 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4660 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4662 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4663 by Motorola PowerPC 601 with PPC_OPCODE_601.
4664 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4665 Disassemble Motorola PowerPC 601 instructions as well as normal
4666 PowerPC instructions.
4668 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4670 * i960-dis.c (reg, mem): Just use a static array instead of
4673 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4675 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4676 condition name index if this is for a negated condition.
4678 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4679 Floating point format for 'H' operand is backwards from normal
4680 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4681 operands (fmpyadd and fmpysub), handle bizarre register
4682 translation correctly for single precision format.
4684 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4685 or 'I' operands if the next format specifier is 'M' (fcmp
4686 condition completer).
4688 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4691 single number giving a bitmask for the MB and ME fields of an M
4692 form instruction. Change NB to accept 32, and turn it into 0;
4693 also turn 0 into 32 when disassembling. Seperated SH from NB.
4694 (insert_mbe, extract_mbe): New functions.
4695 (insert_nb, extract_nb): New functions.
4696 (SC_MASK): Mask out SA and LK bits.
4697 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4698 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4699 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4700 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4701 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4702 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4703 (powerpc_macros): Define table of macro definitions.
4704 (powerpc_num_macros): Define.
4706 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4707 if PPC_OPERAND_NEXT is set.
4709 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4711 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4712 char. Retrieve contents using bfd_getl32 instead of shifting.
4714 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * ppc-opc.c: New file. Opcode table for PowerPC, including
4717 opcodes for POWER (RS/6000).
4718 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4719 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4720 (CFILES): Add ppc-dis.c.
4721 (ppc-dis.o, ppc-opc.o): New targets.
4722 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4724 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4726 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4727 No space before 'u', 'f', or 'N'.
4729 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4731 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4732 farther than we should.
4734 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4736 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4738 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4740 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4742 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4743 needs it, to prevent reading past the end of a section.
4745 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4747 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4748 Removed t,A case for la; always use t,A(b) case.
4750 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4752 From Ted Lemen <mellon@pepper.ncd.com>
4753 * mips-dis.c (print_insn_arg): Handle 'k'.
4754 * mips-opc.c: Make cache use k, not t.
4756 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4758 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4759 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4760 FLOAT_FORMAT_CODE to put out floating point register names.
4762 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4766 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4768 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4770 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4772 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4773 larger than 32. Moved dsxx32 variants first for disassembler.
4775 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4777 * z8kgen.c, z8k-opc.h: Add full lda information.
4779 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4781 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4782 movb instructions. Any necessary space will be emitted by
4783 the code to handle nullification completers.
4785 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4787 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4789 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4791 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4792 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4794 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4796 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4798 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4800 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4801 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4803 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4805 * m88k-dis.c (m88kdis): comment change. Remove space after
4807 (printop): handle new arg types DEC and XREG for m88110.
4809 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4811 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4812 type for absolute branch addresses. Delete special
4813 "ble" and "be" code in 'W' operand code.
4815 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4817 * mips-opc.c: Set hazard information correctly for branch
4818 likely instructions.
4820 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4822 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4823 info->fprintf_func for printing and info->print_address_func for
4826 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4828 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4830 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4832 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4833 Corrected second case of "b" for disassembler.
4835 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4838 to BFD swapping routines to correspond to BFD name changes.
4840 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * mips-opc.c: Change div machine instruction to be z,s,t rather
4843 than s,t. Change div macro to be d,v,t rather than d,s,t.
4844 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4845 rem and remu which generates only the corresponding div
4846 instruction. This is for compatibility with the MIPS assembler,
4847 which only generates the simple machine instruction when an
4848 explicit destination of $0 is used.
4849 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4851 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4854 WR_31 hazard for bal, bgezal, bltzal.
4856 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4858 * hppa-dis.c (print_insn_hppa): Use print function
4859 from within the disassemble_info, not fprintf_filtered.
4861 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4863 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4864 Law, law@cs.utah.edu.)
4866 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4868 * mips-opc.c ("absu"): Removed.
4871 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4874 Changed hazard information to distinguish between memory load
4875 delays and coprocessor load delays.
4877 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4879 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4881 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4883 * configure.in: Don't pass cpu to config.bfd.
4885 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4887 * m88k-dis.c (m88kdis): Make class unsigned.
4889 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4891 * alpha-dis.c (print_insn_alpha): One branch format case was
4892 missing the instruction name.
4894 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4896 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4897 Add the arch-specific auxiliary files.
4898 (OFILES): Remove the arch-specific auxiliary files
4899 and use BFD_MACHINES instead of DIS_LIBS.
4900 * configure.in: Set BFD_MACHINES based on --with-targets option.
4902 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4904 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4907 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4909 * sparc-opc.c: Change CONST to const to deal with gcc
4910 -Dconst=__const -traditional.
4912 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4914 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4915 coprocessor instructions out of #if 0, and made them use new
4918 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4920 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4922 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4924 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4925 instruction, for use by the disassembler.
4927 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4928 hand-coded sign extensions that depended on 32-bit host ints.
4929 FIXME, we still depend on big-endian host bitfield ordering.
4930 (sparc_print_insn): Set the insn_info_valid field, and the
4931 other fields that describe the instruction being printed.
4933 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4935 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4936 `jmp' instead of just one of them.
4938 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4940 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4941 (fput_fp_reg_r): Renamed from fput_reg_r.
4942 (fput_fp_reg): New function.
4943 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4945 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4947 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4949 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4951 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4953 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4954 don't output a space.
4956 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4958 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4960 * mips-opc.c: New file, containing opcode table from
4961 ../include/opcode/mips.h.
4962 * Makefile.in: Add it.
4964 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4966 * m88k-dis.c: New file, moved in from gdb and changed to use the
4967 new dis-asm.h disassembler interface.
4968 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4969 (m88k-dis.o): New target.
4971 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4973 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4974 argument string const char * to correspond to opcode/mips.h.
4976 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4978 * mips-dis.c: Updated to account for name changes in new version
4980 * Makefile.in: Added header file dependencies.
4982 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4984 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4986 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4988 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4989 extend, rather than shifts.
4991 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4993 * Makefile.in: Undo 15 June change.
4995 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4997 * m68k-dis.c (print_insn_arg): Change return value to byte count
4999 * m68k-dis.c: Re-write to detect invalid operands before
5000 printing anything, so we can handle this the same way we
5001 handle invalid opcodes.
5003 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5005 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5007 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5009 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5012 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5014 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5016 * configure.in: Do make sysdep.h link.
5017 * Makefile.in: Search ../include. Don't search ../bfd.
5019 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5021 Changes from Jeff Law, law@cs.utah.edu:
5022 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5023 Do not print a space before the completers specified by
5026 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5028 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5029 defined, since gdb has been fixed.
5031 Changes from Jeff Law, law@cs.utah.edu:
5032 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5033 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5034 be a *disassemble_info, not a *FILE.
5035 * hppa-dis.c: Support 'd', '!', and 'a'.
5036 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5037 * hppa-dis.c: Delete cases which are no longer needed.
5039 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5041 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5043 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5045 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5048 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5050 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5051 * configure.in: No longer need to configure to get sysdep.h.
5053 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5055 * Patches from Jeffrey Law <law@cs.utah.edu>.
5056 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5057 templates for 1.1 FP computational instructions.
5059 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5061 * h8500-dis.c (print_insn_h8500): Address argument is type
5063 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5066 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5067 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5069 * sparc-dis.c (compare_opcodes): Move static declaration to
5072 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5074 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5075 instruction, remove unimp hack from 'l' argument.
5077 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5079 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5082 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5084 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5085 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5088 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5090 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5091 arrays of string pointers to 2-d arrays of chars, to save
5094 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5096 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5097 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5099 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5101 * hppa-dis.c: New file from Utah, adapted to new disassembler
5103 * Makefile.in: Include it.
5105 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5107 * sh-dis.c, sh-opc.h: New files.
5109 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5111 * alpha-dis.c, alpha-opc.h: New files.
5113 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5115 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5118 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5120 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5122 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5124 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5127 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5129 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5130 and double percent signs a few places.
5132 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5134 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5135 Use info->print_address_func not print_address.
5137 * dis-buf.c (generic_print_address): New function.
5139 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5141 * Makefile.in: Add sparc-dis.c.
5142 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5144 Add `add' instruction to the set that get checked
5145 for a preceding `sethi' in order to print an absolute address.
5146 * (print_insn): Disassembly prefers real instructions.
5147 (is_delayed_branch): Speed up.
5148 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5149 Still missing some float ops, and needs testing.
5150 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5151 F_ALIAS. Use printf, not fprintf, when not passing a file
5153 (compare_opcodes): Check that identical instructions have
5154 identical opcodes, complain otherwise.
5157 * Include reg_names.
5159 Use dis-asm.h/read_memory_func interface.
5161 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5163 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5164 deliberately return non-zero to setjmp from longjmp. Otherwise
5165 this code fails to compile.
5167 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5169 * m68k-dis.c: Fix prototype for fetch_arg().
5171 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5173 * dis-buf.c: New file, for new read_memory_func interface.
5174 Makefile.in (OFILES): Include it.
5175 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5176 Use new read_memory_func interface.
5178 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5180 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5181 * h8500-opc.h: Fix couple of opcodes.
5183 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5185 * Makefile.in: add dvi & installcheck targets
5187 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5189 * Makefile.in: Update for h8500-dis.c.
5191 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5193 * h8500-dis.c, h8500-opc.h: New files
5195 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5197 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5198 ../include/dis-asm.h.
5199 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5200 and ../gdb/m68k-pinsn.c).
5201 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5202 and ../gdb/i386-pinsn.c).
5203 * m68881-ext.c: New file. Moved definition of
5204 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5205 * Makefile.in: Adjust for new files.
5206 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5207 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5208 can be dis-assembled.
5210 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5212 * mips-dis.c (print_insn_arg): Now returns void.
5214 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5216 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5217 files that use the macros.
5219 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5221 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5222 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5223 (CFILES): Added mips-dis.c.
5225 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5227 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5228 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5230 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5232 * Makefile.in: Improve *clean rules.
5233 * configure.in: Allow a default host.
5235 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5237 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5238 files include other sysdep files
5240 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5242 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5244 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5246 * configure.in: For host support, use ../bfd/configure.host
5247 so it stays in sync with the ../bfd/hosts database.
5249 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5251 * configure.in: use cpu-vendor-os triple instead of nested cases
5253 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5255 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5256 *always* the wrong one.
5258 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5260 * z8kgen.c: added copyright info
5262 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5264 * z8k-dis.c (unparse_instr): prettier tabs
5265 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5267 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5269 * configure.in: Add ncr* configuration.
5270 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5271 picayune ANSI compilers happy.
5273 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5275 * configure.in (i386): Make i386 and i486 synonymous for now.
5276 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5278 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5280 * Makefile.in (install): Fix typo.
5282 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5284 * Makefile.in (make): Remove obsolete crud.
5285 (sparc-opc.o): Avoid Sun Make VPATH bug.
5287 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5289 * Makefile.in: since there are no SUBDIRS, remove rule and
5290 references of subdir_do.
5292 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5294 * Makefile.in (install): Get the library name right here too.
5295 Don't install bfd.h, since it's unrelated to this library. No
5296 subdirs to recurse into, either.
5297 (CFILES): The source file has a .c suffix, not .o.
5299 * sparc-opc.c: New file, moved from BFD.
5300 * Makefile.in (OFILES): Build it.
5302 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5304 * z8k-dis.c: fixed forward refferences of some declarations.
5306 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5308 * Makefile.in: get the name of the library right
5310 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5312 * z8k-dis.c: knows how to disassemble z8k stuff
5313 * z8k-opc.h: new file full of z8000 opcodes
5317 version-control: never
projects / platform / upstream / binutils.git / blob