1 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
3 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
4 (WR_HILO, RD_HILO, MOD_HILO): New macros.
6 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
8 * v850-dis.c (disassemble): Replace // with /* ... */
10 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
12 * sparc-opc.c: Add wr & rd for v9a asr's.
13 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
14 (v9a_asr_reg_names): New variable.
15 Patch from David Miller <davem@vger.rutgers.edu>.
17 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
19 * sparc-opc.c (v9notv9a): New insn type.
20 (IMPDEP): Move to the end to not conflict with edge8 et al.
21 Patch from David Miller <davem@vger.rutgers.edu>.
23 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
25 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
27 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
29 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
31 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
33 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
34 of disassemble_info structure to determine if an overlay address
35 has a matching symbol in low memory.
37 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
38 new symbol_at_address_func field in disassemble_info structure.
40 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
42 * v850-opc.c (extract_d22): Use signed arithmatic.
44 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
46 * mips-opc.c: Three op mult is not an ISA insn.
48 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
50 * mips-opc.c: Fix formatting.
52 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
54 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
55 than assuming that char is signed. Explicitly sign extend 16 bit
56 values, rather than assuming that short is 16 bits.
57 (OP_sI, OP_J, OP_DIR): Likewise.
60 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
62 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
66 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
68 * v850-opc.c: Fix typo in comment.
70 * v850-dis.c (disassemble): Add test of processor type when
73 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
75 * configure.in: Use a diversion to set enable_shared before the
79 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
81 * m68k-opc.c (TBL1): Use ! rather than `.
82 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
84 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
86 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
88 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
90 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
93 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
94 * aclocal.m4: Rebuild with new libtool.
98 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
100 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
103 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
105 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
107 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
109 * v850-opc.c (v850_opcodes): Further rearrangements.
112 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
114 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
117 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
119 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
122 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
124 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
126 * mips16-opc.c: Added mips16 sdbbp.
129 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
131 * v850-opc.c: Initialise processors field of v850_opcode structure.
134 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
136 Merge changes from Martin Hunt:
138 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
140 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
141 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
142 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
144 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
146 * d30v-dis.c (print_insn): First operand of d*i (delayed
147 branch) instructions is relative.
149 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
150 (d30v_operand_table): Add IMM6S3 type.
151 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
153 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
154 and cmp instructions.
156 * d30v-opc.c: Correct entries for repeat*, and sat*.
157 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
158 types. Correct several formats.
160 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
162 * d30v-opc.c (pre_defined_registers): Change control registers.
164 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
165 SHORT_C2. Manual was incorrect.
167 * d30v-dis.c (lookup_opcode): Return value now indicates
168 if an opcode has a short and a long form. Used for deciding
169 to append a ".s" or ".l".
170 (print_insn): Append a ".s" to an instruction if it is
171 the short form and ".l" if it is a long form. Do not append
172 anything if the instruction has only one possible size.
174 * d30v-opc.c: Change mulx2h to require an even register.
175 New form: SHORT_A2; a SHORT_A form that needs an even
176 register as the first operand.
178 * d30v-dis.c (print_insn_d30v): Fix problem where the last
179 instruction was not being disassembled if there were an odd
180 number of instructions.
182 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
186 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
188 * v850-dis.c (disassemble): Improved display of register lists.
191 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
193 * sparc-opc.c (sparc_opcodes): Fix assembler args to
194 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
195 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
196 fandnot1s, fandnot2s.
198 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
200 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
202 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
204 * cgen-asm.c (cgen_parse_address): New argument resultp.
206 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
208 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
210 * mn10200-dis.c (disassemble): PC relative instructions are
211 relative to the next instruction, not the current instruction.
213 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
215 * v850-dis.c (disassemble): Only signed extend values that are not
216 returned by extract functions.
217 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
219 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
221 * v850-opc.c: Update comments. Remove use of
222 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
224 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
226 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
228 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
230 * configure: Rebuilt with latest devo autoconf for NT support.
232 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
234 * v850-dis.c (disassemble): Use curly brace syntax for register
237 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
238 where r0 is being used as a destination register.
241 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
243 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
247 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
249 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
250 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
251 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
252 Add insns to access SGR and DBR.
253 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
256 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
258 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
261 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
263 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
264 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
267 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
269 * configure (cgen_files): Add support for v850e target.
270 * configure.in (cgen_files): Add support for v850e target.
272 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
274 * configure (cgen_files): Add support for v850eq target.
275 * configure.in (cgen_files): Add support for v850eq target.
278 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
280 * configure.in (bfd_arc_arch): Add.
281 * configure: Rebuild.
282 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
283 * Makefile.in: Rebuild.
284 * arc-dis.c, arc-opc.c: New files.
285 * disassemble.c (ARCH_all): Define ARCH_arc.
286 (disassembler): Add ARC support.
288 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
291 * v850-dis.c (disassemble): Add support for v850EQ instructions.
293 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
294 (v850_opcodes): Add v850EQ instructions.
296 * v850-dis.c (disassemble): Add support for v850E instructions.
298 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
299 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
300 insert_spe, extract_spe): New Functions.
301 (v850_opcodes): Add v850E instructions.
304 * v850-opc.c: Reorganised and re-layed out to improve readability
307 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
309 * configure: Rebuild with autoconf 2.12.1.
311 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
313 * aclocal.m4, configure: Rebuild with new automake patches.
315 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
317 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
318 * acinclude.m4: Just include acinclude.m4 from BFD.
319 * aclocal.m4, configure: Rebuild.
321 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
323 * Makefile.am: New file, based on old Makefile.in.
324 * acconfig.h: New file.
325 * acinclude.m4: New file.
326 * stamp-h.in: New file.
327 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
328 Removed shared library handling; now handled by libtool. Replace
329 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
330 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
331 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
332 handling in AC_OUTPUT.
333 * dep-in.sed: Change .o to .lo.
334 * Makefile.in: Now built with automake.
335 * aclocal.m4: Now built with aclocal.
336 * config.in, configure: Rebuild.
338 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
340 * mips-opc.c: Fix typo/thinko in "eret" instruction.
343 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
345 * mips-opc.c: Fix coding of mtsa.
348 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
350 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
352 * sparc-dis.c (sorted_opcodes): New static local.
353 (struct opcode_hash): `opcode' is pointer to const element.
354 (build_hash): First arg is now table of sorted pointers.
355 (print_insn_sparc): Sort opcodes by sorting table of pointers.
356 (compare_opcodes): Update.
358 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
360 * cgen-opc.c: #include <ctype.h>.
361 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
362 Handle case insensitive hashing.
363 (hash_keyword_value): Change type of `value' to unsigned int.
365 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
367 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
368 precision FP, mark it as such. Likewise for double precision
369 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
372 (mips_builtin_opcodes): Remove non-existant r5900 instructions
376 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
378 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
379 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
382 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
384 * ppc-opc.c (extract_nsi): make unsigned expression signed before
386 (UNUSED): remove one level of parens, so MSVC doesn't choke on
387 nesting depth when all the macros are expanded.
389 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
391 * sparc-opc.c: The fcmp v9a instructions take an integer register
392 as a destination, not a floating point register. From Christian
393 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
395 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
397 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
398 syntax. From Roman Hodek
399 <rnhodek@faui22c.informatik.uni-erlangen.de>.
401 * i386-dis.c (twobyte_has_modrm): Fix pand.
403 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
405 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
407 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
409 * arm-dis.c: Add prototypes for arm_decode_shift and
412 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
414 * mips-opc.c: Add r3900 insns.
416 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
418 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
419 print delay slot instructions on the same line. When using a PC
420 relative load, add a comment with the value being loaded if it can
423 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
425 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
426 to pushS/popS for segment regs and byte constant so that
427 pushw/popw printed when in 16 bit data mode.
429 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
430 print cbtw, cwtd in 16 bit data mode.
431 * i386-dis.c (putop): extra case W to support above.
433 * i386-dis.c (print_insn_x86): print addr32 prefix when given
434 address size prefix in 16 bit address mode.
436 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
438 * sh-dis.c: Reindent. Rename local variable fprintf to
441 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
443 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
445 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
447 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
449 * mips16-opc.c (mip16_opcodes): same.
451 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
453 * m68k-opc.c (moveb): Change $d to %d.
455 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
457 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
458 (twobyte_has_modrm): Likewise.
460 (OP_MMX, OP_EM, OP_MS): New static functions.
462 * i386-dis.c: Revert patch of April 4. The output now matches
465 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
467 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
470 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
472 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
474 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
476 * Makefile.in (install): Depend upon installdirs.
477 (installdirs): New target.
479 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
481 From Thomas Graichen <graichen@rzpd.de>:
482 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
483 * configure: Rebuild.
485 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
487 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
488 Delete string{,s}.h support.
490 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
492 * cgen-asm.c (cgen_parse_operand_fn): New global.
493 (cgen_parse_{{,un}signed_integer,address}): Update call to
494 cgen_parse_operand_fn.
495 (cgen_init_parse_operand): New function.
496 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
497 from cgen_asm_init_parse.
498 (m32r_cgen_assemble_insn): New operand `errmsg'.
499 Delete call to as_bad, return error message to caller.
500 (m32r_cgen_asm_hash_keywords): #if 0 out.
502 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
504 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
506 [case 'J']: Fix typo in register name.
508 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
510 * configure.in: Substitute SHLIB_LIBS.
511 * configure: Rebuild.
512 * Makefile.in (SHLIB_LIBS): New variable.
513 ($(SHLIB)): Use $(SHLIB_LIBS).
515 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
517 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
519 * cgen-opc.c (hash_keyword_name): Improve algorithm.
521 * disassemble.c (disassembler): Handle m32r.
523 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
525 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
526 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
527 * Makefile.in (CFILES): Add them.
528 (ALL_MACHINES): Add them.
529 (dependencies): Regenerate.
530 * configure.in (cgen_files): New variable.
531 (bfd_m32r_arch): Add entry.
532 * configure: Regenerate.
534 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
536 * configure.in: Correct file names for bfd_mn10[23]00_arch.
537 * configure: Rebuild.
539 * Makefile.in: Rebuild dependencies.
541 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
543 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
546 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
548 * Branched binutils 2.8.
550 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
552 * m10200-dis.c: Rename from mn10200-dis.c.
553 * m10200-opc.c: Rename from mn10200-opc.c.
554 * m10300-dis.c: Rename from mn10300-dis.c
555 * m10300-opc.c: Rename from mn10300-opc.c.
556 * Makefile.in: Update accordingly.
558 * mips16-opc.c: Add mul and dmul macros.
560 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
562 * makefile.vms: Update CFLAGS, add clean target.
564 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
566 * mips-opc.c: Add "wait". From Ralf Baechle
567 <ralf@gnu.ai.mit.edu>.
569 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
570 * configure, config.in: Rebuild.
571 * sysdep.h: Include <stdlib.h> if it exists.
572 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
574 * Makefile.in: Rebuild dependencies.
576 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
578 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
579 Andrew Bray <andy@madhouse.demon.co.uk>.
581 * mips-opc.c: Add cast when setting mips_opcodes.
583 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
585 * v850-dis.c (disassemble): Fix sign extension problem.
586 * v850-opc.c (extract_d*): Fix sign extension problems to make
587 disassembly calculate branch offsets correctly.
589 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
591 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
593 * mips-opc.c: Add dctr and dctw.
596 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
598 * d30v-dis.c (print_insn): Change the way signed constants
601 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
603 * Makefile.in (BFD_H): New variable.
604 (HFILES): New variable.
605 (CFILES): Add all C files.
606 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
607 Delete old dependencies, and build new ones.
608 * dep-in.sed: New file.
610 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
612 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
614 start-sanitize-coldfire
615 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
617 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
620 end-sanitize-coldfire
621 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
623 * mn10200-opc.c: Change "trap" to "syscall".
624 * mn10300-opc.c: Add new "syscall" instruction.
626 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
628 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
629 mulul insns on the coldfire.
631 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
633 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
634 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
635 (print_insn_little_arm): Likewise.
637 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
639 Based on patches from H.J. Lu <hjl@lucon.org>:
640 * i386-dis.c (fetch_data): Add prototype.
641 * m68k-dis.c (fetch_data): Add prototype.
642 (dummy_print_address): Add prototype. Make static.
643 * ppc-opc.c (valid_bo): Add prototype.
644 * sparc-dis.c (build_hash_table): Add prototype.
645 (is_delayed_branch, compute_arch_mask): Add prototypes.
646 (print_insn_sparc): Make several local variables const.
647 (compare_opcodes): Change arguments to const PTR. Add prototype.
648 * sparc-opc.c (arg): Change name field to be const.
649 (lookup_name, lookup_value): Add prototypes. Change table and
650 name parameters to be const.
651 (sparc_encode_asi): Change name parameter to be const.
652 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
653 (sparc_encode_sparclet_cpreg): Likewise.
654 (sparc_decode_asi): Change return type to be const.
655 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
656 (sparc_decode_sparclet_cpreg): Likewise.
658 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
660 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
661 Solaris doesn't like the combined options, and the -f is
663 (stamp-tshlink, install): Likewise.
665 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
667 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
670 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
672 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
674 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
676 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
679 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
681 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
684 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
686 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
688 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
690 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
693 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
695 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
696 floatformat_to_double to make portable.
697 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
700 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
702 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
703 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
705 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
707 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
708 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
711 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
713 * tic80-opc.c (LSI_SCALED): Renamed from this ...
714 (OFF_SL_BR_SCALED): ... to this, and added the flag
715 TIC80_OPERAND_BASEREL to the flags word.
716 (tic80_opcodes): Replace all occurances of LSI_SCALED with
720 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
722 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
723 Change mips_opcodes from const array to a pointer,
724 and change bfd_mips_num_opcodes from const int to int,
725 so that we can increase the size of the mips opcodes table
729 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
731 * tic80-opc.c (tic80_predefined_symbols): Revert change to
732 store BITNUM values in the table in one's complement form
733 to match behavior when assembler is given a raw numeric
734 value for a BITNUM operand.
735 * tic80-dis.c (print_operand_bitnum): Ditto.
739 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
741 * d30v-opc.c: Removed references to FLAG_X.
744 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
746 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
749 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
751 * Makefile.in: Added d30v object files.
752 * configure: (bfd_d30v_arch) Rebuilt.
753 * configure.in: (bfd_d30v_arch) Added new case.
754 * d30v-dis.c: New file.
755 * d30v-opc.c: New file.
756 * disassemble.c (disassembler) Add entry for d30v.
760 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
762 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
763 representations for the floating point BITNUM values.
765 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
767 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
768 in the table in one's complement form, as they appear in the
770 (tic80_symbol_to_value): Use macros to access predefined
772 (tic80_value_to_symbol): Ditto.
773 (tic80_next_predefined_symbol): New function.
774 * tic80-dis.c (print_operand_bitnum): Remove code that did
775 one's complement for BITNUM values.
779 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
781 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
784 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
786 * makefile.vms: Remove 8 bit characters. Update to latest
789 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
791 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
793 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
795 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
796 (IMM24_PCREL): Likewise.
798 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
800 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
801 address for an extended PC relative instruction that is not a
804 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
806 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
810 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
812 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
813 (tic80_opcodes): Sort entries so that long immediate forms
814 come after short immediate forms, making it easier for
815 assembler to select the right one for a given operand.
818 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
820 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
822 (print_insn_mips16): Likewise.
825 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
827 * mips-opc.c: add r5900.
831 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
833 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
834 a symbol class that restricts translation to just that
835 class (general register, condition code, etc).
837 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
839 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
840 and REG_DEST_E for register operands that have to be
841 an even numbered register. Add REG_FPA for operands that
842 are one of the floating point accumulator registers.
843 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
844 (tic80_opcodes): Change entries that need even numbered
845 register operands to use the new operand table entries.
846 Add "or" entries that are identical to "or.tt" entries.
849 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
851 * mips16-opc.c: Add new cases of exit instruction for
853 * mips-dis.c (print_mips16_insn_arg): Display floating point
854 registers in operands of exit instruction. Print `$' before
855 register names in operands of entry and exit instructions.
858 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
860 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
861 pairs for all predefined symbols recognized by the assembler.
862 Also used by the disassembling routines.
863 (tic80_symbol_to_value): New function.
864 (tic80_value_to_symbol): New function.
865 * tic80-dis.c (print_operand_control_register,
866 print_operand_condition_code, print_operand_bitnum):
867 Remove private tables and use tic80_value_to_symbol function.
870 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
872 * d10v-dis.c (print_operand): Change address printing
873 to correctly handle PC wrapping. Fixes PR11490.
875 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
877 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
880 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
882 * mips-dis.c (print_insn_mips16): Set insn_info information.
883 (print_mips16_insn_arg): Likewise.
885 * mips-dis.c (print_insn_mips16): Better handling of an extend
886 opcode followed by an instruction which can not be extended.
888 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
890 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
891 coldfire moveb instruction to not allow an address register as
892 destination. Although the documentation does not indicate that
893 this is invalid, experiments uncovered unexpected behavior.
894 Added a comment explaining the situation. Thanks to Andreas
895 Schwab for pointing this out to me.
898 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
900 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
901 entries are presorted so that entries with the same mnemonic are
902 adjacent to each other in the table. Sort the entries for each
903 instruction so that this is true.
906 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
908 * m68k-dis.c: Include <libiberty.h>.
909 (print_insn_m68k): Sort the opcode table on the most significant
910 nibble of the opcode.
913 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
915 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
916 "vsub", "vst", "xnor", and "xor" instructions.
917 (V_a1): Renamed from V_a, msb of accumulator reg number.
918 (V_a0): Add macro, lsb of accumulator reg number.
920 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
922 * tic80-dis.c (print_insn_tic80): Broke excessively long
923 function up into several smaller ones and arranged for
924 the instruction printing function to be callable recursively
925 to print vector instructions that have both a load and a
926 math instruction packed into a single opcode.
927 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
928 to explain why it comes after the other vector opcodes.
931 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
933 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
934 move insns to handle immediate operands.
936 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
938 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
939 fix operand mask in the "moveml" entries for the coldfire.
942 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
944 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
945 New macros for building vector instruction opcodes.
946 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
947 FMT_LI, which were unused. The field is now a flags field.
948 Remove some opcodes that are possible, but illegal, such
949 as long immediate instructions with doubles for immediate
950 values. Add "vadd" and "vld" instructions.
952 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
954 * tic80-opc.c (tic80_operands): Reorder some table entries to make
955 the order more logical. Move the shift alias instructions ("rotl",
956 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
957 interspersed with the regular sr.x and sl.x instructions. Add
958 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
959 "sub", "subu", "swcr", and "trap".
961 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
963 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
964 (OFF_SL_PC): Renamed from OFF_SL.
965 (OFF_SS_BR): New operand type for base relative operand.
966 (OFF_SL_BR): New operand type for base relative operand.
967 (REG_BASE): New operand type for base register operand.
968 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
969 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
970 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
972 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
973 10 char field, padded with spaces on rhs, rather than a string
974 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
975 than old TIC80_OPERAND_RELATIVE. Add support for new
976 TIC80_OPERAND_BASEREL flag bit.
978 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
980 * tic80-dis.c (print_insn_tic80): Print floating point operands
982 * tic80-opc.c (SPFI): Add single precision floating point
983 immediate operand type.
984 (ROTATE): Add rotate operand type for shifts.
985 (ENDMASK): Add for shifts.
986 (n): Macro for the 'n' bit.
987 (i): Macro for the 'i' bit.
988 (PD): Macro for the 'PD' field.
989 (P2): Macro for the 'P2' field.
990 (P1): Macro for the 'P1' field.
991 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
995 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
997 * mn10200-dis.c (disassemble): Mask off unwanted bits after
998 adding in current address for pc-relative operands.
1000 start-sanitize-tic80
1001 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1003 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1004 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1005 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1006 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1007 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1008 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1009 (REG_SCALED, LSI_SCALED): New operand types.
1010 (E): New macro for 'E' bit at bit 27.
1011 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1012 opcodes, including the various size flavors (b,h,w,d) for
1013 the direct load and store instructions.
1015 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1017 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1019 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1020 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1021 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1022 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1023 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1024 masks with "MASK_* & ~M_*" to get the M bit reset.
1025 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1027 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1029 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1030 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1031 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1033 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1034 CC, SICR, and LICR table entries.
1035 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1036 "bcnd", and "brcr" opcodes.
1039 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1041 * ppc-opc.c (powerpc_operands): Make comment match the
1042 actual fields (no shift field).
1043 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1044 start-sanitize-tic80
1045 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1046 partial implementation, work in progress.
1047 * tic80-opc.c (tic80_operands): Begin construction operands table.
1048 (tic80_opcodes): Continue populating opcodes table and start
1049 filling in the operand indices.
1050 (tic80_num_opcodes): Add this.
1053 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1055 * m68k-opc.c: Add #B case for moveq.
1057 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1059 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1060 before they are used.
1062 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1064 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1065 for "breakpoint" instruction.
1067 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1069 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1070 (dep): Use ALL_CFLAGS rather than CFLAGS.
1072 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1074 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1077 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1079 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1080 start-sanitize-tic80
1081 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1084 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1086 * mips16-opc.c: Add "abs".
1088 start-sanitize-tic80
1089 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1091 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1092 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1093 (disassembler): Add bfd_arch_tic80 support to set disassemble
1094 to print_insn_tic80.
1095 * tic80-dis.c (print_insn_tic80): Add stub.
1097 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1099 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1100 * configure: Regenerate with autoconf.
1101 * tic80-dis.c: Add file.
1102 * tic80-opc.c: Add file.
1105 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1107 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1109 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1111 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1112 (mn10200_opcodes): Use it for some logicals and btst insns.
1113 Add "break" and "trap" instructions.
1115 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1117 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1119 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1121 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1122 relative load or add now depends upon whether the instruction is
1125 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1127 * mn10200-dis.c: Finish writing disassembler.
1128 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1129 Fix mask for "jmp (an)".
1131 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1132 handle endianness issues for mn10300.
1134 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1136 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1138 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1139 instruction. Fix opcode field for "movb (imm24),dn".
1141 * mn10200-opc.c (mn10200_operands): Fix insertion position
1144 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1146 * mn10200-opc.c: Create mn10200 opcode table.
1147 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1148 but moving along nicely.
1150 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1152 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1154 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1156 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1157 specifiers for fmovem* instructions.
1159 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1161 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1163 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1165 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1168 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1170 * mn10300-opc.c: Add some comments explaining the various
1173 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1175 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1177 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1180 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1181 operand specifiers in fmovm* instructions.
1183 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1185 * ppc-opc.c (insert_li): Give an error if the offset has the two
1186 least significant bits set.
1188 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1190 * mips-dis.c (print_insn_mips16): Separate the instruction from
1191 the arguments with a tab, not a space.
1193 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1195 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1198 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1201 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1203 * configure: Rebuild with autoconf 2.12.
1205 Add support for mips16 (16 bit MIPS implementation):
1206 * mips16-opc.c: New file.
1207 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1208 (mips16_reg_names): New static array.
1209 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1210 after seeing a 16 bit symbol.
1211 (print_insn_little_mips): Likewise.
1212 (print_insn_mips16): New static function.
1213 (print_mips16_insn_arg): New static function.
1214 * mips-opc.c: Add jalx instruction.
1215 * Makefile.in (mips16-opc.o): New target.
1216 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1217 * configure: Rebuild.
1219 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1221 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1222 operand specifiers in *save, *restore and movem* instructions.
1224 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1227 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1228 register operands for immediate arithmetic, not, neg, negx, and
1229 set according to condition instructions.
1231 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1232 specifier of the effective-address operand in immediate forms of
1233 arithmetic instructions. The specifier for the immediate operand
1234 notes how and where the constant will be stored.
1236 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1238 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1241 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1244 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1246 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1248 * mn10300-dis.c (disassemble): Handle register lists.
1250 * mn10300-opc.c: Fix handling of register list operand for
1251 "call", "ret", and "rets" instructions.
1253 * mn10300-dis.c (disassemble): Print PC-relative and memory
1254 addresses symbolically if possible.
1255 * mn10300-opc.c: Distinguish between absolute memory addresses,
1256 pc-relative offsets & random immediates.
1258 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1260 (disassemble): Handle SPLIT and EXTENDED operands.
1262 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1264 * mn10300-dis.c: Rough cut at printing some operands.
1266 * mn10300-dis.c: Start working on disassembler support.
1267 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1269 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1271 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1273 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1275 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1277 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1279 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1280 register argument is calls and jmp instructions.
1282 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1284 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1285 getx operand. Fix opcode for mulqu imm,dn.
1287 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1289 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1290 in MN10300_OPERAND_SPLIT operands for how many bits
1291 appear in the basic insn word. Add IMM32_HIGH24,
1292 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1293 (mn10300_opcodes): Use new operands as needed.
1295 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1296 for bset, bclr, btst instructions.
1297 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1299 * mn10300-opc.c (mn10300_operands): Remove many redundant
1300 operands. Update opcode table as appropriate.
1301 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1302 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1304 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1306 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1307 operands (for indexed load/stores). Fix bitpos for DI
1308 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1309 few instructions that insert immediates/displacements in the
1310 middle of the instruction. Add IMM8E for 8 bit immediate in
1311 the extended part of an instruction.
1312 (mn10300_operands): Use new opcodes as appropriate.
1314 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1316 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1317 sequential so the assembler never parallelizes it with
1320 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1322 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1323 a data/address register that appears in register field 0
1324 and register field 1.
1325 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1327 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1329 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1330 standard disassembly.
1332 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1333 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1334 Recategorize PALcode instructions.
1336 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1338 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1340 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1342 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1343 there are no operand types.
1345 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1347 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1349 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1351 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1353 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1355 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1357 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1358 and sst.w instructions.
1360 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1363 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1365 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1368 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1370 * ppc-opc.c (PPCPWR2): Define.
1371 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1374 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1376 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1377 field for movhu instruction.
1379 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1380 cast value to "long" not "signed long" to keep hpux10
1383 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1385 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1388 * mn10300-opc.c (FMT*): Remove definitions.
1390 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1391 for shift-by-register opcodes.
1393 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1394 into [AD][MN][01] for encoding the position of the register
1397 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1399 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1400 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1402 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1404 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1405 Fix various typos. Add "PAREN" operand.
1406 (MEM, MEM2): Define.
1407 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1408 operands. Fix several typos.
1410 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1413 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1415 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1416 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1418 (mn10300_opcodes): Break opcode format out into its own field.
1419 Update many operand fields to deal with signed vs unsigned
1420 issues. Fix one or two typos in the "mov" instruction
1421 opcode, mask and/or operand fields.
1423 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1425 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1426 m68851 wasn't reset.
1428 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1430 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1431 all opcodes. Very rough cut at operands for all opcodes.
1433 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1436 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1438 * mn10200-opc.c, mn10300-opc.c: New files.
1439 * mn10200-dis.c, mn10300-dis.c: New files.
1440 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1441 * disassemble.c: Break mn10x00 support into 10200 and 10300
1443 * configure.in: Likewise.
1444 * configure: Rebuilt.
1446 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1448 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1450 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1452 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1454 * disassemble (ARCH_mn10x00): Define.
1455 (disassembler): Handle bfd_arch_mn10x00.
1456 * configure.in: Recognize bfd_mn10x00_arch.
1457 * configure: Rebuilt.
1459 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1461 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1462 accordingly. Don't declare functions using op_rtn.
1464 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1466 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1467 params to be more standard.
1468 * (disassemble): Print absolute addresses and symbolic names for
1469 branch and jump targets.
1470 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1472 * (v850_opcodes): Add breakpoint insn.
1474 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1476 * m68k-opc.c: Move the fmovemx data register cases before the
1477 other cases, so that they get recognized before the data register
1478 does gets treated as a degenerate register list.
1480 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1482 * mips-opc.c: Add a case for "div" and "divu" with two registers
1483 and a destination of $0.
1485 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1487 * mips-dis.c (print_insn_arg): Add prototype.
1488 (_print_insn_mips): Ditto.
1490 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1492 * mips-dis.c (print_insn_arg): Print condition code registers as
1495 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1497 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1499 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1501 * v850-dis.c (disassemble): Make static. Provide prototype.
1503 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1505 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1508 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1510 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1511 ']' characters into the output stream.
1512 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1513 Add "memop" field to all opcodes (for the disassembler).
1514 Reorder opcodes so that "nop" comes before "mov" and "jr"
1515 comes before "jarl".
1517 * v850-dis.c (print_insn_v850): Fix typo in last change.
1519 * v850-dis.c (print_insn_v850): Properly handle disassembling
1520 a two byte insn at the end of a memory region when the memory
1521 region's size is only two byte aligned.
1523 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1525 * v850-dis.c (v850_reg_names): Define.
1526 (v850_sreg_names, v850_cc_names): Likewise.
1527 (disassemble): Very rough cut at printing operands (unformatted).
1529 * v850-opc.c (BOP_MASK): Fix.
1530 (v850_opcodes): Fix mask for jarl and jr.
1532 * v850-dis.c: New file. Skeleton for disassembler support.
1533 * Makefile.in Remove v850 references, they're not needed here.
1534 * configure.in: Add v850-dis.o when building v850 toolchains.
1535 * configure: Rebuilt.
1536 * disassemble.c (disassembler): Call v850 disassembler.
1538 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1539 (insert_d8_6, extract_d8_6): New functions.
1540 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1541 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1543 (IF4A, IF4B): Use "D7" instead of "D7S".
1544 (IF4C, IF4D): Use "D8_7" instead of "D8".
1545 (IF4E, IF4F): New. Use "D8_6".
1546 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1547 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1549 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1550 (v850_operands): Change D16 to D16_15, use special insert/extract
1551 routines. New new D16 that uses the generic insert/extract code.
1552 (IF7A, IF7B): Use D16_15.
1553 (IF7C, IF7D): New. Use D16.
1554 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1556 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1557 message. Issue an error if the branch offset is odd.
1559 * v850-opc.c: Add notes about needing special insert/extract
1560 for all the load/store insns, except "ld.b" and "st.b".
1562 * v850-opc.c (insert_d22, extract_d22): New functions.
1563 (v850_operands): Use insert_d22 and extract_d22 for
1565 (insert_d9): Fix range check.
1567 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1569 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1570 and set bits field to D9 and D22 operands.
1572 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1574 * v850-opc.c (v850_operands): Define SR2 operand.
1575 (v850_opcodes): "ldsr" uses R1,SR2.
1577 * v850-opc.c (v850_opcodes): Fix opcode specs for
1578 sld.w, sst.b, sst.h, sst.w, and nop.
1580 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1582 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1583 end of the opcode table.
1585 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1587 * d10v-opc.c (pre_defined_registers): Added register pairs,
1588 "r0-r1", "r2-r3", etc.
1590 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1592 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1593 Create I16U for an unsigned 16bit mmediate operand.
1594 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1596 * v850-opc.c (v850_operands): Define EP operand.
1597 (IF4A, IF4B, IF4C, IF4D): Use EP.
1599 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1600 with immediate operand, "movhi". Tweak "ldsr".
1602 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1603 correct. Get sld.[bhw] and sst.[bhw] closer.
1605 * v850-opc.c (v850_operands): "not" is a two byte insn
1607 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1609 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1611 * v850-opc.c (two): Get order of words correct.
1613 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1615 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1616 register source and destination operands.
1617 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1619 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1620 same thinko in "trap" opcode.
1622 * v850-opc.c (v850_opcodes): Add initializer for size field
1625 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1626 Add D8 for 8-bit unsigned field in short load/store insns.
1627 (IF4A, IF4D): These both need two registers.
1628 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1629 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1630 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1631 for "ldsr" and "stsr".
1632 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1635 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1636 short store word (sst.w).
1638 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1640 * v850-opc.c (v850_operands): Added insert and extract fields,
1641 pointers to functions that handle unusual operand encodings.
1643 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1645 * v850-opc.c (v850_opcodes): Enable "trap".
1647 * v850-opc.c (v850_opcodes): Fix order of displacement
1648 and register for "set1", "clr1", "not1", and "tst1".
1650 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1652 * v850-opc.c (v850_operands): Add "B3" support.
1653 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1656 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1658 * v850-opc.c: Close unterminated comment.
1660 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1662 * v850-opc.c (v850_operands): Add flags field.
1663 (v850_opcodes): add move opcodes.
1665 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1667 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1668 * configure: (bfd_v850v_arch) Add new case.
1669 * configure.in: (bfd_v850_arch) Add new case.
1670 * v850-opc.c: New file.
1672 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1674 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1676 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1678 * d10v-opc.c: Add additional information to the opcode
1679 table to help determinine which instructions can be done
1682 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1684 * mpw-make.sed: Update editing of include pathnames to be
1687 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1689 * arm-opc.h: Added "bx" instruction definition.
1691 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1693 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1695 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1697 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1699 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1701 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1703 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1705 * makefile.vms: Update for alpha-opc changes.
1707 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1709 * i386-dis.c (print_insn_i386): Actually return the correct value.
1710 (ONE, OP_ONE): #ifdef out; not used.
1712 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1714 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1715 Changed subi operand type to treat 0 as 16.
1717 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1719 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1722 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1724 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1725 memory transfer instructions. Add new format string entries %h and %s.
1726 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1729 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1731 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1732 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1734 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1736 * alpha-dis.c (print_insn_alpha_osf): Remove.
1737 (print_insn_alpha_vms): Remove.
1738 (print_insn_alpha): Make globally visible. Chose the register
1739 names based on info->flavour.
1740 * disassemble.c: Always return print_insn_alpha for the alpha.
1742 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1744 * d10v-dis.c (dis_long): Handle unknown opcodes.
1746 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1748 * d10v-opc.c: Changes to support signed and unsigned numbers.
1749 All instructions with the same name that have long and short forms
1750 now end in ".l" or ".s". Divs added.
1751 * d10v-dis.c: Changes to support signed and unsigned numbers.
1753 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1755 * d10v-dis.c: Change all functions to use info->print_address_func.
1757 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1759 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1760 move ccr/sr insns more strict so that the disassembler only
1761 selects them when the addressing mode is data register.
1763 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1764 * d10v-opc.c (pre_defined_registers): Declare.
1765 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1766 to pick a better name for the registers.
1768 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1770 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1771 operands for fexpand and fpmerge. From Christian Kuehnke
1772 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1774 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1776 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1777 print routine. Take new regnames and cpumask arguments.
1778 Kill the environment variable nonsense.
1779 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1780 (print_insn_alpha_vms): New function. Do VMS style regnames.
1781 * disassemble.c (disassembler): Test bfd flavour to pick
1782 between OSF and VMS routines. Default to OSF.
1784 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1786 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1787 * configure: Rebuild.
1788 * Makefile.in (install): Use @INSTALL_SHLIB@.
1790 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1792 * configure: (bfd_d10v_arch) Add new case.
1793 * configure.in: (bfd_d10v_arch) Add new case.
1794 * d10v-dis.c: New file.
1795 * d10v-opc.c: New file.
1796 * disassemble.c (disassembler) Add entry for d10v.
1798 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1800 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1801 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1803 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1805 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1806 distinguish between variants of the instruction set.
1807 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1808 distinguish between variants of the instruction set.
1810 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1812 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1813 the 8086 instruction set.
1814 * i386-dis.c: General cleanups. Make most things static. Add
1815 prototypes. Get rid of static variables aflags and dflags. Pass
1816 them as args (to almost everything).
1818 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1820 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1822 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1824 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1825 if the next arg is marked with SRC_IN_DST. Gross.
1827 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1828 we're looking for and find EXR.
1830 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1831 if we're looking for KBIT and we don't find it.
1833 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1836 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1837 3bit immediate operands.
1839 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1841 * Released binutils 2.7.
1843 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1844 <kkaempf@progis.ac-net.de>.
1846 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1848 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1850 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1852 * sparc-dis.c (print_insn_sparclite): New routine to print
1853 sparclite instructions.
1855 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1857 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1859 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1861 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1862 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1863 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1865 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1867 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1868 Use autoconf-set values.
1869 (docdir, oldincludedir): Removed.
1870 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1872 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1874 * alpha-opc.c: New file.
1875 * alpha-opc.h: Remove.
1876 * alpha-dis.c: Complete rewrite to use new opcode table.
1877 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1878 * configure: Rebuild with autoconf 2.10.
1879 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1880 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1882 (alpha-opc.o): New target.
1884 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1886 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1887 Set imm_added_to_rs1 even if the source and destination register
1890 * sparc-opc.c: Add some two operand forms of the wr instruction.
1892 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1894 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1897 * disassemble.c (disassembler): Handle H8/S.
1898 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1900 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1902 * sparc-opc.c: Add beq/teq as aliases for be/te.
1904 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1905 <sergei@msil.sps.mot.com>.
1907 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1909 * makefile.vms: New file.
1911 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1913 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1915 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1918 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1920 * i386-dis.c (OP_OFF): Call append_prefix.
1922 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1924 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1925 unsigned long to silence a warning from the Solaris PowerPC
1928 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1930 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1932 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1934 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1936 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1937 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1938 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1939 cpush, cpusha, cpull sparclet insns.
1941 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1943 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1945 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1947 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1948 Set F_FLOAT on other floating point instructions.
1950 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1952 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1954 (powerpc_opcodes): Add 860/821 specific SPRs.
1956 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1958 * configure.in: Permit --enable-shared to specify a list of
1959 directories. Set and substitute BFD_PICLIST.
1960 * configure: Rebuild.
1961 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1962 uses. Set to @BFD_PICLIST@.
1964 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1966 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1967 not "abs", which may be needed for the absolute in something
1968 like btst #0,@10:8. Print L_3 immediates separately from other
1969 immediates. Change ABSMOV reference to ABS8MEM.
1971 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1973 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1974 (current_arch_mask): New static global.
1975 (compute_arch_mask): New static function.
1976 (print_insn_sparc): Delete sparc_v9_p. New static local
1977 current_mach. Resort opcode table if current_mach changes.
1978 Generalize "insn not supported" test.
1979 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1980 Delete test for v9/!v9.
1981 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1983 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1984 (brfcx): Renamed to FBRX.
1985 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1986 coprocessor mnemonics are not supported on the sparclet).
1987 (condf): Renamed to CONDF.
1988 (SLCBCC2): Delete F_ALIAS flag.
1990 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1992 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1993 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1995 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1997 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1998 that the shared library version number is set correctly.
2000 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2002 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2003 Miles Bader <miles@gnu.ai.mit.edu>.
2004 * configure: Rebuild.
2006 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2008 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2011 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2013 * configure: Rebuild with autoconf 2.8.
2015 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2017 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2018 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2020 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2022 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2023 since they appear as targets in Makefile.in.
2024 * configure: Rebuild.
2026 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2028 * mpw-make.sed: Edit out shared library support bits.
2030 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2032 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2033 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2034 (sparc_opcodes): Add sparclet insns.
2035 (sparclet_cpreg_table): New static local.
2036 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2037 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2039 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2041 * i386-dis.c (index16): New static variable.
2042 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2044 (OP_indirE): Return result of OP_E.
2045 (OP_E): Check for 16 bit addressing mode, and disassemble
2046 correctly. Optimised 32 bit case a little. Don't print
2047 "(base,index,scale)" when sib specifies only an offset.
2049 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2051 * configure.in: Set and substitute SHLIB_DEP.
2052 * configure: Rebuild.
2053 * Makefile.in (SHLIB_DEP): New variable.
2054 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2055 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2056 COMMON_SHLIB, add them to piclist with appropriate modifications.
2057 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2058 here: just use piclist.
2060 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2062 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2063 (print_insn_sparc): Rewrite v9/not-v9 tests.
2064 (compare_opcodes): Likewise.
2065 * sparc-opc.c (MASK_<ARCH>): Define.
2066 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2067 (sparclet,v6notv9): Define.
2068 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2069 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2071 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2073 * configure.in: Call AC_PROG_CC before configure.host.
2074 * configure: Rebuild.
2076 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2078 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2080 * i386-dis.c (onebyte_has_modrm): New static array.
2081 (twobyte_has_modrm): New static array.
2082 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2084 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2086 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2089 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2091 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2094 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2096 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2097 m68010up, not just m68020up | cpu32.
2099 * Makefile.in (SONAME): New variable.
2100 ($(SHLINK)): Make a link to the transformed name, as well.
2101 (stamp-tshlink): New target.
2102 (install): Skip stamp-tshlink during install.
2104 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2106 * configure.in: Call AC_ARG_PROGRAM.
2107 * configure: Rebuild.
2108 * Makefile.in (program_transform_name): New variable.
2109 (install): Transform library name before installing it.
2111 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2113 * i960-dis.c (mem): Add HX dcinva instruction.
2115 Support for building as a shared library, based on patches from
2116 Alan Modra <alan@spri.levels.unisa.edu.au>:
2117 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2118 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2119 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2120 * configure: Rebuild.
2121 * Makefile.in (ALLLIBS): New variable.
2122 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2123 (COMMON_SHLIB, SHLINK): New variables.
2124 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2125 (STAGESTUFF): Remove variable.
2126 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2127 (stamp-piclist, piclist): New targets.
2128 ($(SHLIB), $(SHLINK)): New targets.
2129 ($(OFILES)): Depend upon stamp-picdir.
2130 (disassemble.o): Build twice if PICFLAG is set.
2131 (MOSTLYCLEAN): Add pic/*.o.
2132 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2133 (distclean): Remove pic and stamp-picdir.
2134 (install): Install shared libraries.
2135 (stamp-picdir): New target.
2137 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2139 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2140 Print unknown instruction as "unknown", rather than in hex.
2142 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2144 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2146 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2148 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2150 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2152 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2153 when necessary. From Ulrich Drepper
2154 <drepper@myware.rz.uni-karlsruhe.de>.
2156 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2158 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2159 sparc_num_opcodes. Update architecture enum values.
2160 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2161 (sparc_opcode_lookup_arch): New function.
2162 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2163 (sparc_opcodes): Add v9a shutdown insn.
2165 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2167 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2168 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2170 (print_insn_sparc64): Deleted.
2171 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2174 * sparc-opc.c (architecture_pname): Add v9a.
2176 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2178 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2179 incorrectly defined as 0x16 when it should be 0x15.
2180 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2181 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2182 excb (exception barrier) which is defined in the Alpha
2183 Architecture Handbook version 2.
2184 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2185 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2186 disassembled as or, for example.
2188 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2190 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2191 (_print_insn_mips): Change i from int to unsigned int.
2193 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2195 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2196 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2198 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2200 * i386-dis.c: Added Pentium Pro instructions.
2202 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2204 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2207 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2209 * sh-opc.h (sh_nibble_type): Added REG_B.
2210 (sh_arg_type): Added A_REG_B.
2211 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2213 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2215 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2217 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2219 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2221 * Makefile.in (distclean): Remove stamp-h. From Ronald
2222 F. Guilmette <rfg@monkeys.com>.
2224 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2226 From David Mosberger-Tang <davidm@azstarnet.com>:
2227 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2230 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2232 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2233 (sh_table): Added many SH3 opcodes.
2234 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2236 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2238 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2239 (subco,subco.): Mark this PPC, not PPCCOM.
2241 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2243 * configure: Rebuild with autoconf 2.7.
2245 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2247 * configure: Rebuild with autoconf 2.6.
2249 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2251 * configure.in: Sort list of architectures. Accept but do nothing
2252 for alliant, convex, pyramid, romp, and tahoe.
2254 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2256 * a29k-dis.c (print_special): Change num to unsigned int.
2258 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2260 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2263 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2265 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2266 * configure: Rebuilt.
2268 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2270 * configure.in: Add case for bfd_i860_arch.
2271 * configure: Rebuild.
2273 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2275 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2276 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2277 (NEXTDOUBLE): Likewise.
2278 (print_insn_m68k): Don't match fmoveml if there is more than one
2279 register in the list.
2280 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2282 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2284 * m68k-opc.c: Use #W rather than #w.
2285 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2287 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2289 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2290 and likewise for all the dbxx opcodes.
2292 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2294 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2296 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2298 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2299 the VR4100 specific instructions to the mips_opcodes structure.
2301 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2303 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2304 ugly Metrowerks bug in CW6, is fixed in CW7.
2306 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2308 * ppc-opc.c (whole file): Add flags for common/any support.
2310 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2312 * Makefile.in (BISON): Remove macro.
2313 (FLAGS_TO_PASS): Remove BISON.
2315 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2317 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2319 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2320 instructions that take no args by looking at the match mask.
2321 (print_insn_arg): Always print "%" before register names.
2322 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2323 [case '_']: Don't print "@#" before address.
2324 [case 'J']: Use "%s" as format string, not register name.
2325 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2327 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2329 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2332 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2334 From David Mosberger-Tang <davidm@azstarnet.com>
2336 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2337 (alpha_insn_set): added definitions for VAX floating point
2338 instructions (Unix compilers don't generate these, but handcoded
2339 assembly might still use them).
2341 * alpha-dis.c (print_insn_alpha): added support for disassembling
2342 the miscellaneous instructions in the Alpha instruction set.
2344 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2346 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2347 no longer create sysdep.h, sed ppc-opc.c to work around a
2348 serious Metrowerks C bug.
2349 * mpw-make.in: Remove.
2350 * mpw-make.sed: New file, used by mpw-configure to edit
2351 Makefile.in into an MPW makefile.
2353 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2355 * Makefile.in (maintainer-clean): New synonym for realclean.
2357 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2359 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2360 which use '0', '1', and '2' instead. Specify the proper size for
2361 a pmove immediate operand. Correct the pmovefd patterns to be
2362 moves to a register, not from a register.
2363 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2365 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2367 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2368 %psr, %wim, %tbr as F_NOTV9.
2370 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2372 * Makefile.in (Makefile): Just rebuild Makefile when running
2374 (config.h, stamp-h): New targets.
2375 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2376 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2377 rebuilding config.h.
2378 * configure: Rebuild.
2380 * mips-opc.c: Change unaligned loads and stores with "t,A"
2381 operands to use "t,A(b)".
2383 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2385 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2387 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2389 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2390 until 3 instead of until 2.
2392 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2394 * Makefile.in (ALL_CFLAGS): Define.
2395 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2396 (MOSTLYCLEAN): Add config.log.
2397 (distclean): Don't remove config.log.
2398 * configure.in: Substitute HDEFINES.
2399 * configure: Rebuild.
2401 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2403 * sh-opc.h (sh_arg_type): Add F_FR0.
2404 (sh_table, case fmac): Add F_FR0 as first argument.
2406 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2408 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2410 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2412 * sparc-dis.c: Remove all references to NO_V9.
2414 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2416 * aclocal.m4: Just include ../bfd/aclocal.m4.
2417 * configure: Rebuild.
2419 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2421 * sparc-dis.c (X_DISP19): Define.
2422 (print_insn, case 'G'): Use it.
2423 (print_insn, case 'L'): Sign extend displacement.
2425 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2427 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2428 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2429 host_makefile_frag or frags.
2430 * aclocal.m4: New file.
2431 * configure: Rebuild.
2432 * Makefile.in (INSTALL): Set to @INSTALL@.
2433 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2434 (INSTALL_DATA): Set to @INSTALL_DATA@.
2436 (AR_FLAGS): Set to rc rather than qc.
2437 (CC): Define as @CC@.
2438 (CFLAGS): Set to @CFLAGS@.
2439 (@host_makefile_frag@): Remove.
2440 (config.status): Remove dependency upon @frags@.
2442 * configure.in: ../bfd/config.bfd now just sets shell variables.
2443 Use them rather than looking through target Makefile fragments.
2444 * configure: Rebuild.
2446 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2448 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2450 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2452 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2453 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2456 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2457 (lookup_{name,value}): New functions.
2458 (prefetch_table): New static local.
2459 (sparc_{encode,decode}_prefetch): New functions.
2460 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2462 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2464 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2467 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2469 * sh-dis.c: Correct comment on first line of file.
2471 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2473 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2475 * sparc-opc.c (asi, membar): New static locals.
2476 (sparc_{encode,decode}_{asi,membar}): New functions.
2477 (sparc_opcodes, membar insn): Fix.
2478 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2479 Support decoding of membar masks.
2482 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2484 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2486 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2488 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2489 and likewise for the other branches. Add bhs as an alias for bcc,
2490 and likewise for the size variants. Add dbhs as an alias for
2493 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2495 * sh-opc.h (FP sts instructions): Update to match reality.
2497 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2499 * m68k-dis.c: (fpcr_names): Add % before all register names.
2500 (reg_names): Likewise.
2501 (print_insn_arg): Don't explicitly print % before register names.
2502 Add % before register names in static array names. In case 'r',
2503 print data registers as `@(Dn)', not `Dn@'. When printing a
2504 memory address, don't print @# before it.
2505 (print_indexed): Change base_disp and outer_disp from int to
2506 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2507 syntax. Sign extend 8 byte displacement correctly.
2508 (print_base): Print using MIT syntax. Print zpc when appropriate.
2509 Change parameter disp from int to bfd_vma.
2511 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2514 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2516 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2517 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2518 * sh-opc.h (sh_arg_type): Add new operand types.
2519 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2521 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2523 * Makefile.in (distclean): Remove generated file config.h.
2525 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2527 * Makefile.in (distclean): Remove generated file config.h.
2529 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2531 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2533 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2535 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2536 rather than numopcodes. Use m68k_opcodes rather than removed
2537 opcode function. Don't check F_ALIAS.
2538 (print_insn_arg): Change first parameter to be const char *.
2539 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2540 (m68k-opc.o): New target.
2541 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2542 * configure: Rebuild.
2544 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2546 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2547 (opcode_bits, opcode_hash_table): New variables.
2548 (opcodes_initialized): Renamed from opcodes_sorted.
2549 (build_hash_table): New function.
2550 (is_delayed_branch): Use hash table.
2551 (print_insn): Renamed from print_insn_sparc, made static.
2552 Build and use hash table. If !sparc64, ignore sparc64 insns,
2553 and vice-versa if sparc64.
2554 (print_insn_sparc, print_insn_sparc64): New functions.
2555 (compare_opcodes): Move sparc64 opcodes to end.
2556 Print commutative insns with constant second.
2557 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2559 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2561 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2562 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2563 avoids printing a delay slot in a delay slot.
2564 * sh-opc.h (sh_table): Fully bracket last entry.
2566 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2568 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2570 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2572 * configure.in: Get host_makefile_frag from ${srcdir}.
2574 * configure.in: Autoconfiscated. Check for string[s].h. Create
2575 config.h from config.in. Don't set up sysdep.h link.
2576 * sysdep.h: New file.
2577 * configure, config.in: New files, generated from configure.in.
2578 * Makefile.in: Updated to be processed autoconf-style.
2579 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2580 (Makefile): Depend on config.status.
2581 (config.status): New rule.
2582 * configure.bat: Update Makefile substitutions.
2584 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2586 * mips-opc.c (L1): Define.
2587 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2588 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2591 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2593 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2594 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2595 have multiple add units but only a single logical unit.
2597 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2598 shifted by 18, without any insertion or extraction function.
2599 (insert_cr, extract_cr): Remove.
2601 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2603 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2606 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2608 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2609 * sh-opc.h: Add copyright.
2611 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2613 * Makefile.in (crunch-m68k): Delete extra target accidentally
2614 checked in a while ago.
2616 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2618 * sh-opc.h (sh_table): Add SH3 support.
2620 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2622 * sh-opc.h: Added bsrf and braf.
2624 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2626 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2627 bogus [ls]fm{ea,fd} patterns.
2629 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2630 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2631 initialize it from memory. Make function static.
2632 (print_insn_{big,little}_arm): New functions.
2633 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2634 the correct endianness.
2636 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2638 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2641 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2643 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2644 17th, so that it builds again using GCC as the compiler.
2646 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2648 * mips-dis.c (print_insn_little_mips): Cast return value from
2649 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2650 expects an unsigned long, and that might be fewer words of
2651 argument storage (e.g., if bfd_vma is long long on a 32-bit
2653 (print_insn_big_mips): Likewise with bfd_getb32 value.
2654 (_print_insn_mips): Now static.
2656 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2658 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2659 gcc memory hog problem with initializer is fixed.
2661 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2663 Merge in support for Mac MPW as a host.
2664 (Old change descriptions retained for informational value.)
2666 * mpw-config.in (archname): Compute from the config.
2667 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2669 * mpw-config.in (target_arch): Compute from canonical target.
2670 (m68k, mips, powerpc, sparc): Add architectures.
2671 * mpw-make.in (disassemble.c.o): Add.
2672 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2674 * mpw-config.in (BFD_MACHINES): Set to a default value.
2675 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2677 * mpw-make.in (CSEARCH): Add extra-include to search path.
2679 * mpw-config.in (varargs.h): Don't create.
2680 (sysdep.h): Create using forward-include.
2681 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2683 * mpw-config.in: New file, MPW version of configure.in.
2684 * mpw-make.in: New file, MPW version of Makefile.in.
2686 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2688 * alpha-dis.c (print_insn_alpha): Put empty statement after
2691 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2693 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2694 (low_sign_extend): Likewise.
2695 (get_field): Delete unused function.
2696 (set_field, deposit_14, deposit_21): Likewise.
2698 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2700 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2703 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2705 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2707 * alpha-opc.h (OSF_ASMCODE): define
2708 print pal-code names as defined in App C of the
2709 Alpha Architecture Reference Manual
2711 * alpha-dis.c: cleaned up output
2712 print stylized code forms as defined in App A.4.3 of the
2713 Alpha Architecture Reference Manual
2715 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2717 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2719 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2722 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2724 * m68k-dis.c (opcode): New function. Returns address of opcode
2725 table entry given index, even if the opcode table was split to
2726 work around gcc bugs.
2727 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2729 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2730 (reg_names): Now const.
2731 (print_insn_arg): Arrays cacheFieldName and names now const.
2732 (print_indexed): Array scales now const.
2734 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2736 * ppc-opc.c: Sort recently added instructions by minor opcode
2737 number within major opcode number.
2739 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2741 * hppa-dis.c: Include libhppa.h.
2743 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2745 * mips-opc.c: Change dli to use M_DLI, and add dla.
2747 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2749 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2751 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2753 * mips-opc.c: Add r4650 mul instruction.
2755 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2757 * mips-opc.c: Add uld and usd macros for unaligned double load and
2760 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2762 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2763 mfdcr, mtdcr, icbt, iccci.
2765 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2767 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2768 signed char fields to shorts, more portable.
2770 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2772 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2773 char fields as signed chars, since they may have negative values.
2775 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2777 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2778 (mycroft@netbsd.org).
2780 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2782 From "Logg, Ed" <elogg@ea.com>:
2783 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2784 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2787 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2789 * ppc-opc.c: Changes based on patch from David Edelsohn
2790 <edelsohn@mhpcc.edu>.
2791 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2794 (insert_tbr): New static function.
2795 (extract_tbr): New static function.
2796 (XFXFXM_MASK, XFXM): Define.
2797 (XSPRBAT_MASK, XSPRG_MASK): Define.
2798 (powerpc_opcodes): Add instructions to access special registers by
2799 name. Add mtcr and mftbu.
2801 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2803 * mips-opc.c (P3): Define.
2804 (mips_opcodes): Add mad and madu.
2806 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2808 * configure.in: Add W65 support.
2809 * disassemble.c: Likewise.
2810 * w65-opc.h, w65-dis.c: New files.
2812 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2814 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2817 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2819 * mips-opc.c: Add dli as a synonym for li.
2821 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2823 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2824 print something for reserved opcode values, even if it won't
2827 * mips-dis.c (_print_insn_mips): When initializing, shift right
2828 and mask, to avoid sign extension problems on the Alpha.
2830 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2833 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2835 * sh-opc.h (mov.l gbr): Get direction right.
2836 * sh-dis.c (print_insn_shx): New function.
2837 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2838 print opcodes with right byte order.
2840 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2842 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2843 to avoid conflicts with getopt.
2845 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2847 * hppa-dis.c (print_insn_hppa): Read the instruction using
2848 bfd_getb32, so that it works on a little endian or 64 bit host.
2849 Remove unused local variable op.
2851 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2853 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2854 addu does not work correctly if -mips3.
2856 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2858 * a29k-dis.c (print_special): Add special register names defined
2859 on 29030, 29040 and 29050.
2860 (print_insn): Handle new operand type 'I'.
2862 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2864 * Makefile.in (INSTALL): Use top level install.sh script.
2866 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2868 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2869 that it works on a little endian host.
2871 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2873 * configure.in: Use ${config_shell} when running config.bfd.
2875 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2877 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2879 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2881 * a29k-dis.c (print_insn): Print the opcode.
2883 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2885 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2887 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2889 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2891 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2893 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2894 which store a value into memory.
2896 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2898 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2899 * arm-dis.c, arm-opc.h: New files.
2901 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2903 * Makefile.in (ns32k-dis.o): Add dependency.
2904 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2905 string, not as array of chars.
2907 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2909 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2911 * sparc-opc.c: Added sparclite extended FP operations, and
2912 versions of v9 impdep* instructions permitting specification of
2915 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2917 * i960-dis.c (reg_names): Now const.
2918 (struct sparse_tabent): New type, copied from array type in mem
2920 (ctrl): Local static array ctrl_tab now const.
2921 (cobr): Local static array cobr_tab now const.
2922 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2923 static variable mem_tab no longer explicitly initialized. Changed
2924 mem_init to const array of struct sparse_tabent.
2925 (reg): Local static variable reg_tab no longer explicitly
2926 initialized. Changed reg_init to const array of struct
2928 (ea): Local static array scale_tab now const.
2930 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2933 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2935 * configure.bat: the disassember needs to be enabled for
2936 "objdump -d" to work in djgpp.
2938 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2940 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2941 (invalid_float): Enabled general version, doesn't require running
2942 on ns32k host. Changed to take char* argument, and test for
2943 explicitly specified sizes, instead of using sizeof() on host CPU
2945 (INVALID_FLOAT): Cast first argument.
2946 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2947 list_P032, list_M032): Now const.
2948 (optlist, list_search): Made appropriate arguments now point to
2950 (print_insn_arg): Changed static array of one-character-string
2951 pointers into a static const array of characters; fixed sprintf
2952 statement accordingly.
2954 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2956 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2957 from distribution. A ns32k-dis.c from a previous distribution has
2958 been brought up to date and supports the new interface.
2960 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2962 * configure.in: add bfd_ns32k_arch target support.
2964 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2965 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2967 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2969 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2972 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2974 * h8300-dis.c, mips-dis.c: Don't use true and false.
2976 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2978 * configure.in: Change --with-targets to --enable-targets.
2980 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2982 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2983 opcodes to the first instruction with that opcode, to speed
2984 disassembly of large files. From ralphc@pyramid.com (Ralph
2987 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2989 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2991 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2993 * configure.bat: update to latest makefile.in
2995 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2997 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2998 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2999 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3000 slot insn is in a delay slot.
3001 * z8k-opc.h: (resflg): Fix patterns.
3002 * h8500-opc.h Fix CR insn patterns.
3004 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3006 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3007 "cmpl" before POWER versions, so that gas -many uses them.
3009 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3011 * disassemble.c: New file.
3012 * Makefile.in (OFILES): Add disassemble.o.
3013 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3014 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3015 binutils/configure.in.
3017 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3018 opcode being examined.
3020 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3022 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3023 (insert_ral, insert_ram, insert_ras): New functions.
3024 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3025 RAS for store with update.
3027 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3029 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3030 (edelsohn@npac.syr.edu).
3032 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3034 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3037 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3039 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3041 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3043 * ppc-opc.c (powerpc_operands): The signedp field has been
3044 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3045 instead. Add new operand SISIGNOPT.
3046 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3047 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3048 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3051 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3053 * i386-dis.c (struct private): Renamed to dis_private. `private'
3054 is a reserved word for dynix cc.
3056 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3058 * configure.in: Change error message to refer to bfd/config.bfd
3059 rather than bfd/configure.in.
3061 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3063 * ppc-opc.c: Define POWER2 as short alias flag.
3064 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3067 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * i960-dis.c (print_insn_i960): Don't read a second word for
3070 opcodes 0, 1, 2 and 3.
3072 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3074 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3076 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3078 * m68881-ext.c: Removed; no longer used.
3079 * Makefile.in: Changed accordingly.
3081 * m68k-dis.c (ext_format_68881): Don't declare.
3082 (print_insn_m68k): If an instruction uses place 'i', it uses at
3083 least four fixed bytes.
3084 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3085 extended float, convert to double using floatformat_to_double, not
3086 ieee_extended_to_double, and fetch the data before converting it.
3088 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3091 davidj@ICSI.Berkeley.EDU (David Johnson).
3093 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3095 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3096 PowerPC uses bdnz[l][a].
3098 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3100 * dis-buf.c, i386-dis.c: Include sysdep.h.
3102 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3104 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3106 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3107 by Motorola PowerPC 601 with PPC_OPCODE_601.
3108 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3109 Disassemble Motorola PowerPC 601 instructions as well as normal
3110 PowerPC instructions.
3112 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3114 * i960-dis.c (reg, mem): Just use a static array instead of
3117 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3119 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3120 condition name index if this is for a negated condition.
3122 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3123 Floating point format for 'H' operand is backwards from normal
3124 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3125 operands (fmpyadd and fmpysub), handle bizarre register
3126 translation correctly for single precision format.
3128 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3129 or 'I' operands if the next format specifier is 'M' (fcmp
3130 condition completer).
3132 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3134 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3135 single number giving a bitmask for the MB and ME fields of an M
3136 form instruction. Change NB to accept 32, and turn it into 0;
3137 also turn 0 into 32 when disassembling. Seperated SH from NB.
3138 (insert_mbe, extract_mbe): New functions.
3139 (insert_nb, extract_nb): New functions.
3140 (SC_MASK): Mask out SA and LK bits.
3141 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3142 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3143 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3144 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3145 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3146 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3147 (powerpc_macros): Define table of macro definitions.
3148 (powerpc_num_macros): Define.
3150 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3151 if PPC_OPERAND_NEXT is set.
3153 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3155 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3156 char. Retrieve contents using bfd_getl32 instead of shifting.
3158 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3160 * ppc-opc.c: New file. Opcode table for PowerPC, including
3161 opcodes for POWER (RS/6000).
3162 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3163 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3164 (CFILES): Add ppc-dis.c.
3165 (ppc-dis.o, ppc-opc.o): New targets.
3166 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3168 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3170 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3171 No space before 'u', 'f', or 'N'.
3173 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3175 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3176 farther than we should.
3178 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3180 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3182 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3184 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3186 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3187 needs it, to prevent reading past the end of a section.
3189 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3191 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3192 Removed t,A case for la; always use t,A(b) case.
3194 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3196 From Ted Lemen <mellon@pepper.ncd.com>
3197 * mips-dis.c (print_insn_arg): Handle 'k'.
3198 * mips-opc.c: Make cache use k, not t.
3200 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3202 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3203 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3204 FLOAT_FORMAT_CODE to put out floating point register names.
3206 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3208 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3210 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3214 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3216 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3217 larger than 32. Moved dsxx32 variants first for disassembler.
3219 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3221 * z8kgen.c, z8k-opc.h: Add full lda information.
3223 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3225 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3226 movb instructions. Any necessary space will be emitted by
3227 the code to handle nullification completers.
3229 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3231 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3233 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3235 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3236 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3238 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3242 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3244 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3245 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3247 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3249 * m88k-dis.c (m88kdis): comment change. Remove space after
3251 (printop): handle new arg types DEC and XREG for m88110.
3253 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3255 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3256 type for absolute branch addresses. Delete special
3257 "ble" and "be" code in 'W' operand code.
3259 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3261 * mips-opc.c: Set hazard information correctly for branch
3262 likely instructions.
3264 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3266 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3267 info->fprintf_func for printing and info->print_address_func for
3270 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3272 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3274 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3276 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3277 Corrected second case of "b" for disassembler.
3279 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3281 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3282 to BFD swapping routines to correspond to BFD name changes.
3284 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3286 * mips-opc.c: Change div machine instruction to be z,s,t rather
3287 than s,t. Change div macro to be d,v,t rather than d,s,t.
3288 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3289 rem and remu which generates only the corresponding div
3290 instruction. This is for compatibility with the MIPS assembler,
3291 which only generates the simple machine instruction when an
3292 explicit destination of $0 is used.
3293 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3295 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3298 WR_31 hazard for bal, bgezal, bltzal.
3300 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3302 * hppa-dis.c (print_insn_hppa): Use print function
3303 from within the disassemble_info, not fprintf_filtered.
3305 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3307 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3308 Law, law@cs.utah.edu.)
3310 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3312 * mips-opc.c ("absu"): Removed.
3315 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3317 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3318 Changed hazard information to distinguish between memory load
3319 delays and coprocessor load delays.
3321 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3323 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3325 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3327 * configure.in: Don't pass cpu to config.bfd.
3329 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3331 * m88k-dis.c (m88kdis): Make class unsigned.
3333 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3335 * alpha-dis.c (print_insn_alpha): One branch format case was
3336 missing the instruction name.
3338 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3340 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3341 Add the arch-specific auxiliary files.
3342 (OFILES): Remove the arch-specific auxiliary files
3343 and use BFD_MACHINES instead of DIS_LIBS.
3344 * configure.in: Set BFD_MACHINES based on --with-targets option.
3346 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3348 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3351 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3353 * sparc-opc.c: Change CONST to const to deal with gcc
3354 -Dconst=__const -traditional.
3356 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3358 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3359 coprocessor instructions out of #if 0, and made them use new
3362 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3364 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3366 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3368 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3369 instruction, for use by the disassembler.
3371 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3372 hand-coded sign extensions that depended on 32-bit host ints.
3373 FIXME, we still depend on big-endian host bitfield ordering.
3374 (sparc_print_insn): Set the insn_info_valid field, and the
3375 other fields that describe the instruction being printed.
3377 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3379 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3380 `jmp' instead of just one of them.
3382 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3384 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3385 (fput_fp_reg_r): Renamed from fput_reg_r.
3386 (fput_fp_reg): New function.
3387 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3389 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3391 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3393 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3395 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3397 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3398 don't output a space.
3400 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3402 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3404 * mips-opc.c: New file, containing opcode table from
3405 ../include/opcode/mips.h.
3406 * Makefile.in: Add it.
3408 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3410 * m88k-dis.c: New file, moved in from gdb and changed to use the
3411 new dis-asm.h disassembler interface.
3412 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3413 (m88k-dis.o): New target.
3415 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3417 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3418 argument string const char * to correspond to opcode/mips.h.
3420 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3422 * mips-dis.c: Updated to account for name changes in new version
3424 * Makefile.in: Added header file dependencies.
3426 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3428 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3430 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3432 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3433 extend, rather than shifts.
3435 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3437 * Makefile.in: Undo 15 June change.
3439 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3441 * m68k-dis.c (print_insn_arg): Change return value to byte count
3443 * m68k-dis.c: Re-write to detect invalid operands before
3444 printing anything, so we can handle this the same way we
3445 handle invalid opcodes.
3447 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3449 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3451 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3453 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3456 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3458 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3460 * configure.in: Do make sysdep.h link.
3461 * Makefile.in: Search ../include. Don't search ../bfd.
3463 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3465 Changes from Jeff Law, law@cs.utah.edu:
3466 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3467 Do not print a space before the completers specified by
3470 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3472 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3473 defined, since gdb has been fixed.
3475 Changes from Jeff Law, law@cs.utah.edu:
3476 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3477 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3478 be a *disassemble_info, not a *FILE.
3479 * hppa-dis.c: Support 'd', '!', and 'a'.
3480 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3481 * hppa-dis.c: Delete cases which are no longer needed.
3483 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3485 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3487 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3489 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3492 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3494 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3495 * configure.in: No longer need to configure to get sysdep.h.
3497 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3499 * Patches from Jeffrey Law <law@cs.utah.edu>.
3500 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3501 templates for 1.1 FP computational instructions.
3503 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3505 * h8500-dis.c (print_insn_h8500): Address argument is type
3507 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3510 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3511 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3513 * sparc-dis.c (compare_opcodes): Move static declaration to
3516 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3518 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3519 instruction, remove unimp hack from 'l' argument.
3521 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3523 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3526 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3528 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3529 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3532 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3534 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3535 arrays of string pointers to 2-d arrays of chars, to save
3538 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3540 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3541 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3543 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3545 * hppa-dis.c: New file from Utah, adapted to new disassembler
3547 * Makefile.in: Include it.
3549 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3551 * sh-dis.c, sh-opc.h: New files.
3553 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3555 * alpha-dis.c, alpha-opc.h: New files.
3557 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3559 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3562 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3564 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3566 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3568 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3571 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3573 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3574 and double percent signs a few places.
3576 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3578 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3579 Use info->print_address_func not print_address.
3581 * dis-buf.c (generic_print_address): New function.
3583 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3585 * Makefile.in: Add sparc-dis.c.
3586 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3588 Add `add' instruction to the set that get checked
3589 for a preceding `sethi' in order to print an absolute address.
3590 * (print_insn): Disassembly prefers real instructions.
3591 (is_delayed_branch): Speed up.
3592 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3593 Still missing some float ops, and needs testing.
3594 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3595 F_ALIAS. Use printf, not fprintf, when not passing a file
3597 (compare_opcodes): Check that identical instructions have
3598 identical opcodes, complain otherwise.
3601 * Include reg_names.
3603 Use dis-asm.h/read_memory_func interface.
3605 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3607 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3608 deliberately return non-zero to setjmp from longjmp. Otherwise
3609 this code fails to compile.
3611 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3613 * m68k-dis.c: Fix prototype for fetch_arg().
3615 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3617 * dis-buf.c: New file, for new read_memory_func interface.
3618 Makefile.in (OFILES): Include it.
3619 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3620 Use new read_memory_func interface.
3622 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3624 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3625 * h8500-opc.h: Fix couple of opcodes.
3627 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3629 * Makefile.in: add dvi & installcheck targets
3631 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3633 * Makefile.in: Update for h8500-dis.c.
3635 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3637 * h8500-dis.c, h8500-opc.h: New files
3639 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3641 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3642 ../include/dis-asm.h.
3643 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3644 and ../gdb/m68k-pinsn.c).
3645 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3646 and ../gdb/i386-pinsn.c).
3647 * m68881-ext.c: New file. Moved definition of
3648 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3649 * Makefile.in: Adjust for new files.
3650 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3651 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3652 can be dis-assembled.
3654 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3656 * mips-dis.c (print_insn_arg): Now returns void.
3658 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3660 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3661 files that use the macros.
3663 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3665 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3666 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3667 (CFILES): Added mips-dis.c.
3669 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3671 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3672 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3674 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3676 * Makefile.in: Improve *clean rules.
3677 * configure.in: Allow a default host.
3679 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3681 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3682 files include other sysdep files
3684 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3686 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3688 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3690 * configure.in: For host support, use ../bfd/configure.host
3691 so it stays in sync with the ../bfd/hosts database.
3693 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3695 * configure.in: use cpu-vendor-os triple instead of nested cases
3697 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3699 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3700 *always* the wrong one.
3702 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3704 * z8kgen.c: added copyright info
3706 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3708 * z8k-dis.c (unparse_instr): prettier tabs
3709 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3711 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3713 * configure.in: Add ncr* configuration.
3714 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3715 picayune ANSI compilers happy.
3717 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3719 * configure.in (i386): Make i386 and i486 synonymous for now.
3720 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3722 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3724 * Makefile.in (install): Fix typo.
3726 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3728 * Makefile.in (make): Remove obsolete crud.
3729 (sparc-opc.o): Avoid Sun Make VPATH bug.
3731 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3733 * Makefile.in: since there are no SUBDIRS, remove rule and
3734 references of subdir_do.
3736 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3738 * Makefile.in (install): Get the library name right here too.
3739 Don't install bfd.h, since it's unrelated to this library. No
3740 subdirs to recurse into, either.
3741 (CFILES): The source file has a .c suffix, not .o.
3743 * sparc-opc.c: New file, moved from BFD.
3744 * Makefile.in (OFILES): Build it.
3746 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3748 * z8k-dis.c: fixed forward refferences of some declarations.
3750 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3752 * Makefile.in: get the name of the library right
3754 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3756 * z8k-dis.c: knows how to disassemble z8k stuff
3757 * z8k-opc.h: new file full of z8000 opcodes
3761 version-control: never
projects / external / binutils.git / blob