1 1999-06-13 Ian Lance Taylor <ian@zembu.com>
3 * i386-dis.c (FWAIT_OPCODE): Define.
4 (fetch_data): Don't print an error message if we have already
6 (ckprefix): Use FWAIT_OPCODE rather than 0x9b.
7 (print_insn_i386): If setjmp fails, indicating a data error, but
8 we have found an fwait prefix, then print it as an fwait
9 instruction. In any case, return the number of bytes consumed, if
10 any, rather than always returning -1.
12 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
14 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
15 Support signx %reg, clruw %reg.
17 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
19 * sparc-opc.c: Add aliases Solaris as supports.
21 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
23 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
24 * Makefile.in: Regenerated.
26 1999-06-03 Philip Blundell <philb@gnu.org>
28 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
29 when target is PC-relative.
31 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
33 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
36 * m68k-dis.c (fetch_arg): Add places `n', `o'.
38 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
39 Add mcf5206e to appropriate instructions.
40 Add alias for MAC, MSAC.
42 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
45 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
46 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
48 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
50 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
52 * i386-dis.c (Ed): Define.
53 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
55 (OP_rm): Rename to OP_Rd.
58 (putop): Add const to template and p.
59 (print_insn_x86): Delete.
60 (print_insn_i386): Merge old function print_insn_x86. Add const
62 (struct dis386): Add const to name.
63 (dis386_att, dis386_intel): Add const.
64 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
65 (names32, names16, names8, names_seg, index16): Add const.
66 (grps, prefix_user_table, float_reg): Add const.
67 (float_mem_att, float_mem_intel): Add const.
68 (oappend): Add const to s.
69 (OP_REG): Add const to s.
70 (ptr_reg): Add const to s.
71 (dofloat): Add const to dp.
72 (OP_C): Don't skip modrm, it's now done in OP_Rd.
75 (OP_Rd): Check for valid mod. Call Op_E to print.
76 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
77 (OP_MS): Check for valid mod. Call Op_EM to print.
78 (OP_3DNowSuffix): Set obufp and use oappend rather than
79 strcat. Call BadOp() for errors.
80 (OP_SIMD_Suffix): Likewise.
81 (BadOp): New function.
83 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
85 * i386-dis.c (dis386_intel): Remove macro chars, except for
86 jEcxz. Change cWtR and cRtd to cW and cR.
87 (dis386_twobyte_intel): Remove macro chars here too.
88 (putop): Handle R and W macros for intel mode.
90 * i386-dis.c (SIMD_Fixup): New function.
91 (dis386_twobyte_att): Use it on movlps and movhps, and change
92 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
93 (dis386_twobyte_intel): Same here.
95 * i386-dis.c (Av): Remove.
99 (OP_SIMD_Suffix): New function.
100 (OP_DIR): Remove dead code.
101 (eAX_reg..eDI_reg): Renumber.
102 (onebyte_has_modrm): Table numbering comments.
103 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
104 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
105 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
106 and handle SIMD cmp insns in OP_SIMD_Suffix.
107 (info->bytes_per_line): Bump from 5 to 6.
109 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
110 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
112 PIII SIMD support from Doug Ledford <dledford@redhat.com>
113 * i386-dis.c (XM, EX, None): Define.
114 (OP_XMM, OP_EX, OP_None): New functions.
115 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
116 (GRP14): Rename to GRPAMD.
117 (GRP*): Add USE_GROUPS flag.
119 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
120 (twobyte_has_modrm): Add SIMD entries.
121 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
122 (grps): Add SIMD insns.
123 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
124 oappend repz if uses_f3_prefix. Add code to handle new groups for
127 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
128 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
129 operand from Av to Jv.
131 1999-05-07 Nick Clifton <nickc@cygnus.com>
133 * mcore-dis.c (print_insn_mcore): Use .short to display
134 unidentified instructions, not .word.
136 1999-04-26 Tom Tromey <tromey@cygnus.com>
138 * aclocal.m4, configure: Updated for new version of libtool.
140 1999-04-14 Doug Evans <devans@casey.cygnus.com>
142 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
143 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
145 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
147 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
150 1999-04-10 Doug Evans <devans@casey.cygnus.com>
152 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
153 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
155 1999-04-06 Ian Lance Taylor <ian@zembu.com>
157 * opintl.h (LC_MESSAGES): Never define.
159 1999-04-04 Ian Lance Taylor <ian@zembu.com>
161 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
162 (separator_char, scale_char): Likewise.
163 (print_insn_x86): Likewise.
164 (print_insn_i386): Likewise. Add declaration.
166 1999-03-26 Doug Evans <devans@casey.cygnus.com>
168 * fr30-dis.c: Rebuild.
169 * m32r-dis.c: Rebuild.
171 1999-03-23 Ian Lance Taylor <ian@zembu.com>
173 * m68k-opc.c: Change compare instructions to use "@s" rather than
174 ";s" when used with an immediate operand.
176 1999-03-22 Doug Evans <devans@casey.cygnus.com>
178 * cgen-opc.c (cgen_set_cpu): Delete.
179 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
180 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
182 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
184 * po/opcodes.pot: Rebuild.
186 1999-03-16 Martin Hunt <hunt@cygnus.com>
188 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
190 1999-03-11 Doug Evans <devans@casey.cygnus.com>
192 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
193 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
194 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
195 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
196 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
197 * m32r-opinst.c: Rebuild.
199 1999-02-25 Doug Evans <devans@casey.cygnus.com>
201 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
202 (cgen_hw_lookup_by_num): Rewrite.
203 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
204 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
205 * m32r-opinst.c: Rebuild.
207 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
209 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
210 (insert_jhint): Fix insertion mask.
211 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
213 1999-02-10 Doug Evans <devans@casey.cygnus.com>
215 * Makefile.in: Rebuild.
217 1999-02-09 Doug Evans <devans@casey.cygnus.com>
219 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
220 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
221 * Makefile.am: Remove references to them.
222 (HFILES): Add fr30-desc.h,m32r-desc.h.
223 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
225 (ALL_MACHINES): Update.
226 * configure.in: Redo handling of cgen_files.
227 (bfd_i960_arch): Delete i960c-*.lo files.
228 * configure: Regenerate.
229 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
230 (hash_insn_array): Rewrite.
231 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
232 (hash_insn_array): Rewrite.
233 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
234 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
235 (cgen_lookup_get_insn_operands): Ditto.
236 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
237 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
238 * po/POTFILES.in: Rebuild.
239 * po/opcodes.pot: Rebuild.
241 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
243 * Makefile.am: Rebuild dependencies.
244 (HFILES): Add fr30-opc.h.
245 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
246 * Makefile.in: Rebuild.
248 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
249 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
251 * acconfig.h: Remove.
252 * configure: Rebuild with current autoconf/automake.
253 * aclocal.m4: Likewise.
254 * config.in: Likewise.
255 * Makefile.in: Likewise.
257 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
259 * m68k-opc.c: Correct move (not movew) to status word on 5200.
261 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
263 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
264 * i386-dis.c (x_mode): Define.
268 (dis386_twobyte): Remove.
269 (dis386_twobyte_att): New.
270 (dis386_twobyte_intel): New.
271 (print_insn_x86): Use new arrays.
273 (float_mem_intel): New.
274 (float_mem_att): New.
275 (dofloat): Use new float_mem arrays.
276 (print_insn_i386_att): New.
277 (print_insn_i386_intel): New.
278 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
279 (putop): Handle intel syntax.
280 (OP_indirE): Handle intel syntax.
281 (OP_E): Handle intel syntax.
282 (OP_I): Handle intel syntax.
283 (OP_sI): Handle intel syntax.
284 (OP_OFF): Handle intel syntax.
288 1999-01-27 Doug Evans <devans@casey.cygnus.com>
290 * fr30-opc.h,fr30-opc.c: Rebuild.
291 * i960c-opc.h,i960c-opc.c: Rebuild.
292 * m32r-opc.c: Rebuild.
294 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
296 * hppa-dis.c: revert HP merge changes until HP gives us
299 1999-01-19 Nick Clifton <nickc@cygnus.com>
301 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
302 offsets as well as symbloic address.
304 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
306 * hppa-dis.c: fix comments and some indentation.
308 1999-01-12 Doug Evans <devans@casey.cygnus.com>
310 * fr30-opc.c,i960c-opc.c: Regenerate.
312 1999-01-11 Doug Evans <devans@casey.cygnus.com>
314 * fr30-opc.c: Regenerate.
316 1999-01-06 Doug Evans <devans@casey.cygnus.com>
318 * m32r-dis.c: Regenerate.
320 1999-01-05 Doug Evans <devans@casey.cygnus.com>
322 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
323 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
324 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
326 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
328 * configure.in: Require autoconf 2.12.1 or higher.
330 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
332 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
334 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
336 * fr30-opc.c: Regenerated.
338 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
340 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
342 1998-12-15 Dave Brolley <brolley@cygnus.com>
344 * fr30-opc.c,fr30-opc.h: Regenerated.
346 1998-12-14 Dave Brolley <brolley@cygnus.com>
348 * fr30-opc.c,fr30-opc.h: Regenerated.
350 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
352 * fr30-opc.c,fr30-opc.h: Regenerated.
354 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
356 * m32r-opc.c: Regenerate.
358 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
360 * dis-buf.c (generic_strcat_address): reformat to GNU coding
361 conventions. change sprintf call to an sprintf_vma call.
363 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
365 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
367 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
369 The following changes were made by
370 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
371 David Taylor <taylor@texas.cygnus.com>, and
372 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
373 merge in changes by HP; HP did not create ChangeLog entries.
375 * dis-buf.c (generic_strcat_address): new function.
377 * hppa-dis.c: Changes to improve hppa disassembly.
378 Changed formatting in : reg_names, fp_reg_names,control_reg,
379 New variables : sign_extension_names, deposit_names, conversion_names
380 float_test_names, compare_cond_names_double, add_cond_names_double,
381 logical_cond_names_double, unit_cond_names_double,
382 branch_push_pop_names, saturation_names, shift_names, mix_names,
383 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
384 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
385 (fput_const): renamed as fput_hex_const
387 - use the macros fputs_filtered and
388 fput_decimal_const whenever possible; calls to sign_extend require
389 2 params -- add a missing second param of 0.
390 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
391 architecture version number of current machine. HP folks are
392 trying to handle situation where the target program was compiled
393 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
395 - added new cases : 'g', 'B', 'm'
396 - added cases specifically for PA 2.0
397 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
398 - calls to fput_const become calls to fput_hex_const
400 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
402 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
403 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
404 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
405 * Makefile.in: Rebuilt.
406 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
408 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
409 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
411 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
413 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
415 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
417 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
419 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
420 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
422 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
424 * fr30-opc.c: Regenerate.
426 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
428 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
430 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
432 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
434 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
436 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
438 1998-11-30 Doug Evans <devans@casey.cygnus.com>
440 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
441 CGEN_INSN_BASE_VALUE.
442 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
443 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
445 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
447 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
449 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
451 * fr30-asm.c,fr30-dis.c: Regenerated.
453 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
455 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
457 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
459 * fr30-opc.c: Regenerated.
461 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
463 * fr30-opc.c: Regenerated.
464 * fr30-opc.h: Regenerated.
465 * fr30-dis.c: Regenerated.
466 * fr30-asm.c: Regenerated.
468 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
470 * mips-opc.c (sync.p,sync.l): Swap insn values.
472 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
474 * fr30-opc.c: Regenerate.
476 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
478 * fr30-opc.c: Regenerated.
479 * fr30-opc.h: Regenerated.
481 1998-11-18 Doug Evans <devans@casey.cygnus.com>
483 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
484 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
486 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
488 * fr30-opc.c: Regenerated.
490 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
492 * fr30-opc.c: Regenerated.
493 * fr30-opc.h: Regenerated.
494 * fr30-dis.c: Regenerated.
495 * fr30-asm.c: Regenerated.
497 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
499 * po/opcodes.pot: Regenerated.
500 * fr30-opc.c: Regenerated.
501 * fr30-opc.h: Regenerated.
502 * fr30-dis.c: Regenerated.
503 * fr30-asm.c: Regenerated.
505 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
507 * disassemble.c (disassembler): Add support for FR30 target.
509 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
511 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
512 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
514 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
516 * po/opcodes.pot: Regenerate.
517 * po/POTFILES.in: Regenerate.
518 * fr30-opc.c: Regenerate.
519 * fr30-opc.h: Regenerate.
521 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
523 * m32r-asm.c: Regenerate.
525 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
527 * configure.in: Added case for bfd_fr30_arch.
528 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
529 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
530 (CLEANFILES): Added stamp-fr30.
532 * fr30-asm.c: New file.
533 * fr30-dis.c: New file.
534 * fr30-opc.c: New file.
535 * fr30-opc.h: New file.
536 * po/POTFILES.in: Regenerated
537 * po/opcodes.pot: Regenerated
539 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
541 * configure.in: detect cygwin* instead of cygwin32*
542 * configure: regenerate
544 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
546 * mips-opc.c (IS_M): Added.
548 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
550 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
552 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
554 * m32r-opc.h,m32r-opc.c: Regenerate.
556 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
558 * i386-dis.c (OP_3DNowSuffix): New static function.
561 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
562 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
563 (insn_codep): New static variable.
564 (print_insn_x86): Init insn_codep after prefixes.
565 (grps): Add GRP14 entries for prefetch, prefetchw.
568 From Jeff B Epler <jepler@usgs.gov>
569 * i386-dis.c (Suffix3DNow): New table.
571 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
573 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
575 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
577 * d10v-dis.c (print_operand): If num is nonzero, then
578 add OPERAND_ACC1, not OPERAND_ACC0.
580 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
582 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
585 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
587 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
590 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
592 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
594 1998-09-09 Michael Meissner <meissner@cygnus.com>
596 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
599 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
601 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
603 (print_insn_little_arm): Detect Thumb symbols in elf object
606 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
608 * alpha-dis.c (print_insn_alpha): Use the machine type to
609 decide which PALcode set to include.
611 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
613 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
615 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
617 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
618 MSUB and MSUBS instructions.
620 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
622 * ppc-opc.c (powerpc_operands): Omit parens around additions in
625 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
627 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
628 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
629 +, -, and d for ColdFire.
631 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
632 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
633 (extract_mbe): Likewise.
635 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
637 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
639 * m10300-opc.c: First cut at UDF instructions.
641 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
643 * m32r-opc.c: Regenerate (remove semantic descriptions).
645 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
647 * arm-dis.c (print_insn_big_arm): Fix indentation.
648 (print_insn_little_arm): Likewise.
650 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
652 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
654 (print_insn_little_arm): Likewise.
656 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
658 Move all global state data into opcode table struct, and treat
659 opcode table as something that is "opened/closed".
660 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
661 (cgen_asm_init): Delete.
662 (cgen_set_parse_operand_fn): New function.
663 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
664 (cgen_dis_init): Delete.
665 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
666 (cgen_current_{opcode_table_mach,endian}): Delete.
667 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
669 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
671 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
674 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
676 * m10300-opc.c: Add entries for "no_match_operands" field in
679 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
681 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
683 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
685 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
687 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
689 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
691 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
693 (OP_J): Remove unnecessary subtraction when 16-bit displacement
694 will be masked later.
696 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
698 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
700 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
702 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
704 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
706 * m10300-dis.c: Only recognize instructions from the currently
708 * m10300-opc.c: Add field indicating the particular variant of
709 the mn10300 each instruction is available on.
711 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
713 * configure.in: For bfd_vax_arch, build vax-dis.lo.
714 * Makefile.am: Rebuild dependencies.
715 (CFILES): Add vax-dis.c.
716 (ALL_MACHINES): Add vax-dis.lo.
717 * aclocal.m4: Rebuild with current libtool.
718 * configure, Makefile.in: Rebuild.
720 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
722 * vax-dis.c: New file, from work by Pauline Middelink
723 <middelin@polyware.iaf.nl>.
724 * disassemble.c (ARCH_vax): Define if ARCH_all.
725 (disassembler): Add case for ARCH_vax.
726 * makefile.vms: Support compilation on vms/vax.
728 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
730 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
731 related to sign extension and the size of ints.
733 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
735 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
736 instructions. Support (sp) addressing mode by expanding it into
739 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
741 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
743 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
745 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
747 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
749 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
752 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
754 * mips-dis.c (print_insn_little_mips): Previously, instruction
755 printing references the symbol table to determine whether the
756 instruction resides in a block regular instructions or mips16
757 instructions. However, when the disassembler gets used in other
758 environments where the symbol table is not present, we no longer
759 rely in the symbol table, rather, use the low bit of the
760 instructions address to guess. There should be no change for usage
761 of the disassembler in host based programs, gdb, objdump.
762 (print_insn_big_mips): ditto.
763 (print_insn_mips): ditto
765 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
767 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
769 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
771 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
773 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
775 * i386-dis.c (index16): Add '%' to register names. Use ','
778 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
780 * i386-dis.c: Don't print opcode suffix when we can figure out the
781 size (and gas can!) by register operands, or from the default
783 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
785 (dis386, dis386_twobyte, grps): Use new suffix macros.
786 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
787 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
788 order of cmps operands to agree with Intel docs. Correct operand
789 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
790 agree with Intel docs.
791 (print_insn_x86): Print orphan fwait before other prefixes.
792 Return correct byte count for orphan fwait with prefixes. Don't
793 print `bound' operands in reverse order.
794 (ckprefix): Stop accumulating prefixes if we get fwait.
795 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
797 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
799 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
800 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
802 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
804 Fix problems when bfd_vma is wider than long.
805 * i386-dis.c: Make op_address and start_pc unsigned.
806 (set_op): Make parameter unsigned.
807 (print_insn_x86): Cast to bfd_vma when passing a value to
809 * ns32k-dis.c (CORE_ADDR): Don't define.
810 (print_insn_ns32k): Change type of addr to bfd_vma. Use
811 bfd_scan_vma to read back address.
812 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
814 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
815 (NEXTULONG): New definition.
816 (print_insn_m68k): Avoid overflow when computing third argument of
818 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
819 Use disp instead of val to store offset values.
820 (print_indexed): Use base_disp instead of word to store base
821 displacement, to avoid overflow.
822 * m10300-dis.c (disassemble): Cast value to long when computing
823 pc-relative address, to get correct sign extension.
825 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
827 * m32r-opc.c: Regenerate.
829 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
831 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
832 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
834 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
836 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
838 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
840 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
842 (OP_DSreg): Rename from OP_DSSI.
843 (OP_ESreg): Rename from OP_ESDI.
844 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
846 (append_seg): Rename from append_prefix.
847 (ptr_reg): New function.
848 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
850 (PREFIX_ADDR): Rename from PREFIX_ADR.
851 (float_reg): Add non-broken opcodes for people who don't want
854 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
856 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
859 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
861 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
863 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
865 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
866 0; produce error message for shifts of size 32 (or 64 for 64-bit
867 shifts), because the hardware doesn't support them.
869 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
871 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
872 LONG_2, LONG_2b formats to use this new operand.
874 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
876 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
878 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
880 * sparc-dis.c (print_insn_sparc): big endian instruction / little
883 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
885 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
886 and SHORT_B3b formats to use Rb instead of Ra.
888 Add FLAG_MUL16 to MUL2XH opcode.
890 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
891 to existing 1.1.1 parallelisation prohibition procedure.
893 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
895 * m32r-asm.c,m32r-dis.c: Regenerate.
897 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
899 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
900 with a shift count of 0.
902 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
904 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
905 (cgen_hw_lookup_by_num): New function.
907 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
909 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
911 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
913 * sparc-dis.c (print_insn_sparc): Always fetch instructions
914 as big-endian on SPARClite.
916 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
918 * d30v-opc.c (pre_defined_register): Remove alias for r0.
920 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
922 * po/Make-in (install-info): New target.
924 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
926 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
927 * configure: Rebuild.
929 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
931 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
932 variety of ISA2 instructions to set bottom ten bits of trap code.
934 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
936 * Makefile.am (config.status): Add explicit target so that
937 config.status depends upon bfd/configure.in.
938 * Makefile.in: Rebuild.
940 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
942 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
943 instructions to set bottom ten bits of break code.
944 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
945 for above optional argument.
947 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
949 * makefile.vms: Run dec c with /nodebug.
951 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
953 * Makefile.in: Rebuilt.
954 * Makefile.am: Regenerated dependencies with mkdep.
956 * opintl.h (_): Define as dgettext.
958 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
960 * cgen-asm.c: Internationalised.
961 * m32r-asm.c: Internationalised.
962 * m32r-dis.c: Internationalised.
963 * m32r-opc.c: Internationalised.
965 * aclocal.m4: Regenerated.
966 * configure: Regenerated.
967 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
968 * Makefile.in: Rebuild.
969 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
970 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
972 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
974 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
976 * aclocal.m4, configure: Rebuild with current tools.
978 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
980 * opintl.h: New file - contains internationalisation macros used
981 by source files in this directory.
982 * po/: New subdirectory - contains internationalisation files.
983 * po/Make-in: New file - Makefile constructor.
984 * po/POTFILES.in: New file - list of files in opcodes directory
985 that should be scan for internationalisation macros.
986 * po/opcodes.pot: New file - list of internationisation strings
987 found in files mentioned in po/POTFILES.in.
988 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
989 entry. Add intl directory to include paths.
990 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
991 HAVE_STRCPY, HAVE_LC_MESSAGES
992 * configure.in: Add rule to build Makefile in po subdirectory.
993 * Makefile.in: Rebuilt.
994 * aclocal.m4: Rebuilt.
995 * config.in: Rebuilt.
996 * configure: Rebuilt.
997 * alpha-opc.c: Internationalised.
998 * arc-dis.c: Internationalised.
999 * arc-opc.c: Internationalised.
1000 * arm-dis.c: Internationalised.
1001 * cgen-asm.c: Internationalised.
1002 * d30v-dis.c: Internationalised.
1003 * dis-buf.c: Internationalised.
1004 * h8300-dis.c: Internationalised.
1005 * h8500-dis.c: Internationalised.
1006 * i386-dis.c: Internationalised.
1007 * m10200-dis.c: Internationalised.
1008 * m10300-dis.c: Internationalised.
1009 * m68k-dis.c: Internationalised.
1010 * m88k-dis.c: Internationalised.
1011 * mips-dis.c: Internationalised.
1012 * ns32k-dis.c: Internationalised.
1013 * opintl.h: Internationalised.
1014 * ppc-opc.c: Internationalised.
1015 * sparc-dis.c: Internationalised.
1016 * v850-dis.c: Internationalised.
1017 * v850-opc.c: Internationalised.
1019 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1021 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1022 (asm_hash_table_entries): New variable.
1023 (cgen_asm_init): Free asm_hash_table_entries.
1024 (hash_insn_array,hash_insn_list): New functions.
1025 (build_asm_hash_table): Use them. Hash macro insns as well.
1026 (cgen_asm_lookup_insn): Update.
1027 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1028 (dis_hash_table_entries): New variable.
1029 (cgen_dis_init): Free dis_hash_table_entries.
1030 (hash_insn_array,hash_insn_list): New functions.
1031 (build_dis_hash_table): Use them. Hash macro insns as well.
1032 (cgen_dis_lookup_insn): Update.
1033 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1034 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1035 (cgen_macro_insn_count): New function.
1036 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1038 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1040 * i386-dis.c (OP_DSSI): Print segment override.
1042 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1044 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1047 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1049 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1050 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1051 * configure.in: Define and substitute WIN32LDFLAGS and
1053 * aclocal.m4: Rebuild with new libtool.
1054 * configure, Makefile.in: Rebuild.
1056 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1058 * m32r-opc.c: Regenerate.
1060 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1062 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1063 before trying to copy it.
1064 * Makefile.in: Rebuild.
1066 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1068 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1070 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1072 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1073 from an arbitrary valid buffer instead of fetching them on demand
1075 (invalid_float): use bit_extract_simple() instead of bit_extract().
1077 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1079 From H.J. Lu <hjl@gnu.org>:
1080 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1083 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1085 * Branched binutils 2.9.
1087 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1089 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1090 disassembling last 4 bytes of a section.
1092 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1094 Fix some gcc -Wall warnings:
1095 * arc-dis.c (print_insn): Add casts to avoid warnings.
1096 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1097 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1098 * m10200-dis.c (disassemble): Likewise.
1099 * m10300-dis.c (disassemble): Likewise.
1100 * ns32k-dis.c (print_insn_ns32k): Likewise.
1101 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1102 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1103 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1104 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1105 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1106 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1107 * tic80-dis.c (print_one_instruction): Likewise.
1108 * w65-dis.c (print_operand): Likewise.
1109 * z8k-dis.c (fetch_data): Likewise.
1110 * a29k-dis.c: Add return type for find_byte_func_type.
1111 * arc-opc.c: Include <stdio.h>. Remove declarations of
1112 insert_multshift and extract_multshift.
1113 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1115 (extract_value): Fully parenthesize expression.
1116 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1117 * h8500-opc.h (h8500_table): Fully bracket initializer.
1118 * w65-opc.h (optable): Likewise.
1119 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1120 * i386-dis.c (OP_E): Initialize local variables.
1121 * m10200-dis.c (print_insn_mn10200): Likewise.
1122 * mips-dis.c (print_insn_mips16): Likewise.
1123 * sh-dis.c (print_insn_shx): Likewise.
1124 * v850-dis.c (print_insn_v850): Likewise.
1125 * ns32k-dis.c (print_insn_arg): Declare.
1126 (get_displacement, invalid_float): Declare.
1127 (list_search, sign_extend, flip_bytes): Declare return type.
1128 (get_displacement): Likewise.
1129 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1131 (print_insn_ns32k): Make i unsigned.
1132 (invalid_float): Make static. Declare type of val.
1133 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1134 on each for iteration.
1135 * tic30-dis.c (get_indirect_operand): Likewise.
1136 * z8k-dis.c (print_insn_z8001): Declare return type.
1137 (print_insn_z8002): Likewise.
1138 (unparse_instr): Fix sprintf format strings.
1140 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1142 * mips-opc.c: Add "sync.l" and "sync.p".
1144 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1146 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1147 default m68k variant to recognize.
1149 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1150 (ctrl, cobr, mem, ea): Likewise.
1151 (print_addr): Likewise. Remove cast.
1152 (ea): Cast argument of print_addr to bfd_vma.
1154 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1156 (cgen_parse_unsigned_integer): Likewise.
1157 (cgen_parse_address): Likewise.
1159 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1161 * i960-dis.c (ctrl): Add full braces to structure initialization.
1162 (cobr, mem, reg): Likewise.
1163 (ea): Correct parenthesization in expression.
1165 * cgen-asm.c: Include <ctype.h>.
1166 (build_asm_hash_table): Remove unused local variable i.
1167 (cgen_parse_keyword): Add casts to avoid warnings.
1169 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1170 symbol. Fix indentation.
1171 (print_insn_little_arm): Likewise.
1173 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1175 * configure.in: Use AM_DISABLE_SHARED.
1176 * aclocal.m4, configure: Rebuild with libtool 1.2.
1178 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1180 These patches are courtesy of Jonathan Walton and Tony Thompson
1181 (athompso@cambridge.arm.com).
1183 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1186 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1187 both the offset and the label closest to the destination.
1189 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1191 * m32r-opc.h: Regenerate.
1193 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1195 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1197 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1199 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1200 assume that info->symbols is non-empty.
1202 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1204 * alpha-opc.c (cvtqs) There is no such thing.
1205 (cvttq): Missing most of the /*d variants.
1207 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1209 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1210 delayed branches or jumps.
1212 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1214 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1216 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1217 * tic30-dis.c (print_branch): Likewise.
1219 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1221 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1222 saved_symbol code as it is no longer needed.
1224 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1226 * cgen-asm.c: Include symcat.h.
1227 * cgen-dis.c,cgen-opc.c: Ditto.
1228 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1230 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1232 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1234 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1236 * m32r-opc.[ch]: Regenerate.
1238 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1240 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1241 arguments. Don't perform validation here.
1242 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1244 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1246 * m32r-opc.c: Regenerate.
1248 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1250 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1251 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1253 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1255 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1257 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1259 * configure.in: Get the version number from BFD.
1260 * configure: Rebuild.
1262 From H.J. Lu <hjl@gnu.org>:
1263 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1264 * Makefile.in: Rebuild.
1266 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1268 * m32r-opc.c: Regenerate.
1269 * m32r-opc.h: Regenerate.
1271 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1273 * m32r-opc.c: Regenerate.
1275 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1277 Fix rac to accept only a0:
1278 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1279 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1280 Introduce OPERAND_GPR.
1281 * d10v-dis.c (print_operand): Likewise.
1283 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1285 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1286 (cgen_hw_lookup): Make result const.
1287 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1289 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1291 * configure, aclocal.m4: Rebuild with new libtool.
1293 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1295 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1296 instructions use a PC relative branch, not absolute.
1298 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1300 * configure.in: Set libtool_enable_shared rather than
1301 libtool_shared. Remove diversion hack.
1302 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1304 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1306 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1307 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1309 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1311 * tic30-dis.c: New file.
1312 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1313 * configure.in: Handle bfd_tic30_arch.
1314 * Makefile.am: Rebuild dependencies.
1315 (CFILES): Add tic30-dis.c
1316 (ALL_MACHINES): Add tic30-dis.lo.
1317 * configure, Makefile.in: Rebuild.
1319 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1321 * m32r-opc.h (HAVE_CPU_M32R): Define.
1323 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1325 * v850-opc.c (insertion routines): If both alignment and size is
1326 wrong then report this.
1328 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1330 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1331 Only recognize instructions for the current target_processor.
1333 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1335 * d10v-dis.c (PC_MASK): Correct value.
1336 (print_operand): If there's a reloc, don't calculate the
1337 address because they could be in different sections.
1339 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1341 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1342 instruction after the 4650's "mul" instruction; nobody's using the
1343 4010 these days. If object files someday indicate which processor
1344 variant they're intended for, we can do a better job at this.
1346 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1348 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1349 table provided entry size. Use CGEN_INSN_MNEMONIC.
1350 (cgen_parse_keyword): Rewrite.
1351 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1352 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1353 * cgen-opc.c: Clean up pass over `struct foo' usage.
1354 (cgen_keyword_lookup_value): Handle "" entry.
1355 (cgen_keyword_add): Likewise.
1357 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1359 * mips-opc.c: Add FP_D to s.d instruction flags.
1361 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1363 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1365 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1367 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1368 PC relative offset forms before the 15 bit forms. An assembler command
1369 line option now chooses the default.
1371 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1373 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1374 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1376 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1378 * configure: Only build libopcodes shared if --enable-shared's value
1379 was `yes', or was set to `*opcodes*'.
1380 * aclocal.m4: Likewise.
1381 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1382 original source of this bit of code. It's not clear what the best fix
1385 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1387 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1388 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1389 offset forms before the 15 bit forms, to default to the long forms.
1391 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1393 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1395 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1397 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1398 symbol if none is present.
1399 (print_insn_big_arm): Prevent examination of stored symbol if
1402 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1404 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1406 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1408 * disassemble.c: Remove disasm_symaddr() function.
1410 * arm-dis.c: Use info->symbol instead of info->flags to determine
1411 if disassmbly should be in Thumb or Arm mode.
1413 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1415 * arm-dis.c: Add support for disassembling Thumb opcodes.
1416 (print_insn_thumb): New function.
1418 * disassemble.c (disasm_symaddr): New function.
1420 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1421 (thumb_opcodes): Table of Thumb opcodes.
1423 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1425 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1427 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1428 and 'v' as operand types.
1430 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1432 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1433 <olivier.carmona@di.epfl.ch>.
1434 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1435 which has a two word opcode with a one word argument.
1437 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1439 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1440 unsigned, not signed.
1441 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1443 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1445 * d10v-dis.c (print_operand):
1446 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1448 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1450 * d10v-opc.c (OPERAND_FLAG): Split into:
1451 (OPERAND_FFLAG, OPERAND_CFLAG) .
1455 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1457 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1458 field for all INSN_MACRO's.
1459 * mips16-opc.c: same
1461 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1463 * mips-opc.c (sync,cache): These are 3900 insns.
1465 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1467 sh-opc.h (sh_table): Remove ftst/nan.
1469 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1471 * mips-opc.c (ffc, ffs): Fix mask.
1473 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1475 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1478 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1480 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1481 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1483 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1485 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1486 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1488 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1490 * v850-dis.c (disassemble): Replace // with /* ... */
1492 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1494 * sparc-opc.c: Add wr & rd for v9a asr's.
1495 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1496 (v9a_asr_reg_names): New variable.
1497 Patch from David Miller <davem@vger.rutgers.edu>.
1499 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1501 * sparc-opc.c (v9notv9a): New insn type.
1502 (IMPDEP): Move to the end to not conflict with edge8 et al.
1503 Patch from David Miller <davem@vger.rutgers.edu>.
1505 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1507 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1509 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1511 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1513 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1515 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1516 of disassemble_info structure to determine if an overlay address
1517 has a matching symbol in low memory.
1519 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1520 new symbol_at_address_func field in disassemble_info structure.
1522 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1524 * v850-opc.c (extract_d22): Use signed arithmatic.
1526 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1528 * mips-opc.c: Three op mult is not an ISA insn.
1530 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1532 * mips-opc.c: Fix formatting.
1534 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1536 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1537 than assuming that char is signed. Explicitly sign extend 16 bit
1538 values, rather than assuming that short is 16 bits.
1539 (OP_sI, OP_J, OP_DIR): Likewise.
1541 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1543 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1546 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1548 * v850-opc.c: Fix typo in comment.
1550 * v850-dis.c (disassemble): Add test of processor type when
1551 determining opcodes.
1553 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1555 * configure.in: Use a diversion to set enable_shared before the
1556 arguments are parsed.
1557 * configure: Rebuild.
1559 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1561 * m68k-opc.c (TBL1): Use ! rather than `.
1562 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1564 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1566 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1568 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1570 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1573 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1574 * aclocal.m4: Rebuild with new libtool.
1575 * configure: Rebuild.
1577 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1579 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1581 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1583 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1585 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1587 * v850-opc.c (v850_opcodes): Further rearrangements.
1589 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1591 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1593 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1595 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1598 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1600 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1602 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1604 * v850-opc.c: Initialise processors field of v850_opcode structure.
1606 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1608 Merge changes from Martin Hunt:
1610 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1612 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1613 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1614 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1616 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1618 * d30v-dis.c (print_insn): First operand of d*i (delayed
1619 branch) instructions is relative.
1621 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1622 (d30v_operand_table): Add IMM6S3 type.
1623 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1625 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1626 and cmp instructions.
1628 * d30v-opc.c: Correct entries for repeat*, and sat*.
1629 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1630 types. Correct several formats.
1632 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1634 * d30v-opc.c (pre_defined_registers): Change control registers.
1636 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1637 SHORT_C2. Manual was incorrect.
1639 * d30v-dis.c (lookup_opcode): Return value now indicates
1640 if an opcode has a short and a long form. Used for deciding
1641 to append a ".s" or ".l".
1642 (print_insn): Append a ".s" to an instruction if it is
1643 the short form and ".l" if it is a long form. Do not append
1644 anything if the instruction has only one possible size.
1646 * d30v-opc.c: Change mulx2h to require an even register.
1647 New form: SHORT_A2; a SHORT_A form that needs an even
1648 register as the first operand.
1650 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1651 instruction was not being disassembled if there were an odd
1652 number of instructions.
1654 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1656 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1658 * v850-dis.c (disassemble): Improved display of register lists.
1660 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1662 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1663 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1664 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1665 fandnot1s, fandnot2s.
1667 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1669 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1671 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1673 * cgen-asm.c (cgen_parse_address): New argument resultp.
1674 All callers updated.
1675 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1677 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1679 * mn10200-dis.c (disassemble): PC relative instructions are
1680 relative to the next instruction, not the current instruction.
1682 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1684 * v850-dis.c (disassemble): Only signed extend values that are not
1685 returned by extract functions.
1686 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1688 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1690 * v850-opc.c: Update comments. Remove use of
1691 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1693 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1695 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1697 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1699 * configure: Rebuilt with latest devo autoconf for NT support.
1701 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1703 * v850-dis.c (disassemble): Use curly brace syntax for register
1706 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1707 where r0 is being used as a destination register.
1709 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1711 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1713 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1715 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1717 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1719 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1720 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1723 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1725 * configure (cgen_files): Add support for v850e target.
1726 * configure.in (cgen_files): Add support for v850e target.
1728 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1730 * configure (cgen_files): Add support for v850ea target.
1731 * configure.in (cgen_files): Add support for v850ea target.
1733 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1735 * configure.in (bfd_arc_arch): Add.
1736 * configure: Rebuild.
1737 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1738 * Makefile.in: Rebuild.
1739 * arc-dis.c, arc-opc.c: New files.
1740 * disassemble.c (ARCH_all): Define ARCH_arc.
1741 (disassembler): Add ARC support.
1743 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1745 * v850-dis.c (disassemble): Add support for v850EA instructions.
1747 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1748 (v850_opcodes): Add v850EA instructions.
1750 * v850-dis.c (disassemble): Add support for v850E instructions.
1752 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1753 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1754 insert_spe, extract_spe): New Functions.
1755 (v850_opcodes): Add v850E instructions.
1757 * v850-opc.c: Reorganised and re-layed out to improve readability
1760 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1762 * configure: Rebuild with autoconf 2.12.1.
1764 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1766 * aclocal.m4, configure: Rebuild with new automake patches.
1768 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1771 * acinclude.m4: Just include acinclude.m4 from BFD.
1772 * aclocal.m4, configure: Rebuild.
1774 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1776 * Makefile.am: New file, based on old Makefile.in.
1777 * acconfig.h: New file.
1778 * acinclude.m4: New file.
1779 * stamp-h.in: New file.
1780 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1781 Removed shared library handling; now handled by libtool. Replace
1782 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1783 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1784 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1785 handling in AC_OUTPUT.
1786 * dep-in.sed: Change .o to .lo.
1787 * Makefile.in: Now built with automake.
1788 * aclocal.m4: Now built with aclocal.
1789 * config.in, configure: Rebuild.
1791 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1793 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1795 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1797 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1799 * sparc-dis.c (sorted_opcodes): New static local.
1800 (struct opcode_hash): `opcode' is pointer to const element.
1801 (build_hash): First arg is now table of sorted pointers.
1802 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1803 (compare_opcodes): Update.
1805 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1807 * cgen-opc.c: #include <ctype.h>.
1808 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1809 Handle case insensitive hashing.
1810 (hash_keyword_value): Change type of `value' to unsigned int.
1812 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1814 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1815 precision FP, mark it as such. Likewise for double precision
1816 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1819 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1821 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1823 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1824 nesting depth when all the macros are expanded.
1826 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1828 * sparc-opc.c: The fcmp v9a instructions take an integer register
1829 as a destination, not a floating point register. From Christian
1830 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1832 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1834 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1835 syntax. From Roman Hodek
1836 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1838 * i386-dis.c (twobyte_has_modrm): Fix pand.
1840 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1842 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1844 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1846 * arm-dis.c: Add prototypes for arm_decode_shift and
1849 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1851 * mips-opc.c: Add r3900 insns.
1853 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1855 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1856 print delay slot instructions on the same line. When using a PC
1857 relative load, add a comment with the value being loaded if it can
1860 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1862 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1863 to pushS/popS for segment regs and byte constant so that
1864 pushw/popw printed when in 16 bit data mode.
1866 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1867 print cbtw, cwtd in 16 bit data mode.
1868 * i386-dis.c (putop): extra case W to support above.
1870 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1871 address size prefix in 16 bit address mode.
1873 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1875 * sh-dis.c: Reindent. Rename local variable fprintf to
1878 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1880 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1882 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1884 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1886 * mips16-opc.c (mip16_opcodes): same.
1888 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1890 * m68k-opc.c (moveb): Change $d to %d.
1892 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1894 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1895 (twobyte_has_modrm): Likewise.
1897 (OP_MMX, OP_EM, OP_MS): New static functions.
1899 * i386-dis.c: Revert patch of April 4. The output now matches
1902 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1904 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1907 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1909 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1911 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1913 * Makefile.in (install): Depend upon installdirs.
1914 (installdirs): New target.
1916 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1918 From Thomas Graichen <graichen@rzpd.de>:
1919 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1920 * configure: Rebuild.
1922 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1924 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1925 Delete string{,s}.h support.
1927 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1929 * cgen-asm.c (cgen_parse_operand_fn): New global.
1930 (cgen_parse_{{,un}signed_integer,address}): Update call to
1931 cgen_parse_operand_fn.
1932 (cgen_init_parse_operand): New function.
1933 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1934 from cgen_asm_init_parse.
1935 (m32r_cgen_assemble_insn): New operand `errmsg'.
1936 Delete call to as_bad, return error message to caller.
1937 (m32r_cgen_asm_hash_keywords): #if 0 out.
1939 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1941 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1943 [case 'J']: Fix typo in register name.
1945 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1947 * configure.in: Substitute SHLIB_LIBS.
1948 * configure: Rebuild.
1949 * Makefile.in (SHLIB_LIBS): New variable.
1950 ($(SHLIB)): Use $(SHLIB_LIBS).
1952 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1954 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1956 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1958 * disassemble.c (disassembler): Handle m32r.
1960 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1962 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1963 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1964 * Makefile.in (CFILES): Add them.
1965 (ALL_MACHINES): Add them.
1966 (dependencies): Regenerate.
1967 * configure.in (cgen_files): New variable.
1968 (bfd_m32r_arch): Add entry.
1969 * configure: Regenerate.
1971 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1973 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1974 * configure: Rebuild.
1976 * Makefile.in: Rebuild dependencies.
1978 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1980 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1983 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1985 * Branched binutils 2.8.
1987 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1989 * m10200-dis.c: Rename from mn10200-dis.c.
1990 * m10200-opc.c: Rename from mn10200-opc.c.
1991 * m10300-dis.c: Rename from mn10300-dis.c
1992 * m10300-opc.c: Rename from mn10300-opc.c.
1993 * Makefile.in: Update accordingly.
1995 * mips16-opc.c: Add mul and dmul macros.
1997 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1999 * makefile.vms: Update CFLAGS, add clean target.
2001 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2003 * mips-opc.c: Add "wait". From Ralf Baechle
2004 <ralf@gnu.ai.mit.edu>.
2006 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2007 * configure, config.in: Rebuild.
2008 * sysdep.h: Include <stdlib.h> if it exists.
2009 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2011 * Makefile.in: Rebuild dependencies.
2013 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2015 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2016 Andrew Bray <andy@madhouse.demon.co.uk>.
2018 * mips-opc.c: Add cast when setting mips_opcodes.
2020 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2022 * v850-dis.c (disassemble): Fix sign extension problem.
2023 * v850-opc.c (extract_d*): Fix sign extension problems to make
2024 disassembly calculate branch offsets correctly.
2026 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2028 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2030 * mips-opc.c: Add dctr and dctw.
2032 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2034 * d30v-dis.c (print_insn): Change the way signed constants
2037 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2039 * Makefile.in (BFD_H): New variable.
2040 (HFILES): New variable.
2041 (CFILES): Add all C files.
2042 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2043 Delete old dependencies, and build new ones.
2044 * dep-in.sed: New file.
2046 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2048 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2050 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2052 * mn10200-opc.c: Change "trap" to "syscall".
2053 * mn10300-opc.c: Add new "syscall" instruction.
2055 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2057 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2058 mulul insns on the coldfire.
2060 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2062 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2063 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2064 (print_insn_little_arm): Likewise.
2066 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2068 Based on patches from H.J. Lu <hjl@lucon.org>:
2069 * i386-dis.c (fetch_data): Add prototype.
2070 * m68k-dis.c (fetch_data): Add prototype.
2071 (dummy_print_address): Add prototype. Make static.
2072 * ppc-opc.c (valid_bo): Add prototype.
2073 * sparc-dis.c (build_hash_table): Add prototype.
2074 (is_delayed_branch, compute_arch_mask): Add prototypes.
2075 (print_insn_sparc): Make several local variables const.
2076 (compare_opcodes): Change arguments to const PTR. Add prototype.
2077 * sparc-opc.c (arg): Change name field to be const.
2078 (lookup_name, lookup_value): Add prototypes. Change table and
2079 name parameters to be const.
2080 (sparc_encode_asi): Change name parameter to be const.
2081 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2082 (sparc_encode_sparclet_cpreg): Likewise.
2083 (sparc_decode_asi): Change return type to be const.
2084 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2085 (sparc_decode_sparclet_cpreg): Likewise.
2087 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2089 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2090 Solaris doesn't like the combined options, and the -f is
2092 (stamp-tshlink, install): Likewise.
2094 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2096 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2099 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2101 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2103 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2105 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2108 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2110 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2112 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2114 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2116 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2118 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2120 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2122 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2123 floatformat_to_double to make portable.
2124 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2127 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2129 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2130 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2132 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2134 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2135 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2137 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2139 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2140 (OFF_SL_BR_SCALED): ... to this, and added the flag
2141 TIC80_OPERAND_BASEREL to the flags word.
2142 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2145 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2147 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2148 Change mips_opcodes from const array to a pointer,
2149 and change bfd_mips_num_opcodes from const int to int,
2150 so that we can increase the size of the mips opcodes table
2153 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2155 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2156 store BITNUM values in the table in one's complement form
2157 to match behavior when assembler is given a raw numeric
2158 value for a BITNUM operand.
2159 * tic80-dis.c (print_operand_bitnum): Ditto.
2161 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2163 * d30v-opc.c: Removed references to FLAG_X.
2165 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2167 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2169 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2171 * Makefile.in: Added d30v object files.
2172 * configure: (bfd_d30v_arch) Rebuilt.
2173 * configure.in: (bfd_d30v_arch) Added new case.
2174 * d30v-dis.c: New file.
2175 * d30v-opc.c: New file.
2176 * disassemble.c (disassembler) Add entry for d30v.
2178 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2180 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2181 representations for the floating point BITNUM values.
2183 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2185 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2186 in the table in one's complement form, as they appear in the
2188 (tic80_symbol_to_value): Use macros to access predefined
2190 (tic80_value_to_symbol): Ditto.
2191 (tic80_next_predefined_symbol): New function.
2192 * tic80-dis.c (print_operand_bitnum): Remove code that did
2193 one's complement for BITNUM values.
2195 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2197 * makefile.vms: Remove 8 bit characters. Update to latest
2200 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2202 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2204 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2206 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2207 (IMM24_PCREL): Likewise.
2209 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2211 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2212 address for an extended PC relative instruction that is not a
2215 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2217 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2220 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2222 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2223 (tic80_opcodes): Sort entries so that long immediate forms
2224 come after short immediate forms, making it easier for
2225 assembler to select the right one for a given operand.
2227 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2231 (print_insn_mips16): Likewise.
2233 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2235 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2236 a symbol class that restricts translation to just that
2237 class (general register, condition code, etc).
2239 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2241 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2242 and REG_DEST_E for register operands that have to be
2243 an even numbered register. Add REG_FPA for operands that
2244 are one of the floating point accumulator registers.
2245 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2246 (tic80_opcodes): Change entries that need even numbered
2247 register operands to use the new operand table entries.
2248 Add "or" entries that are identical to "or.tt" entries.
2250 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2252 * mips16-opc.c: Add new cases of exit instruction for
2254 * mips-dis.c (print_mips16_insn_arg): Display floating point
2255 registers in operands of exit instruction. Print `$' before
2256 register names in operands of entry and exit instructions.
2258 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2260 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2261 pairs for all predefined symbols recognized by the assembler.
2262 Also used by the disassembling routines.
2263 (tic80_symbol_to_value): New function.
2264 (tic80_value_to_symbol): New function.
2265 * tic80-dis.c (print_operand_control_register,
2266 print_operand_condition_code, print_operand_bitnum):
2267 Remove private tables and use tic80_value_to_symbol function.
2269 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2271 * d10v-dis.c (print_operand): Change address printing
2272 to correctly handle PC wrapping. Fixes PR11490.
2274 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2276 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2279 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2281 * mips-dis.c (print_insn_mips16): Set insn_info information.
2282 (print_mips16_insn_arg): Likewise.
2284 * mips-dis.c (print_insn_mips16): Better handling of an extend
2285 opcode followed by an instruction which can not be extended.
2287 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2289 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2290 coldfire moveb instruction to not allow an address register as
2291 destination. Although the documentation does not indicate that
2292 this is invalid, experiments uncovered unexpected behavior.
2293 Added a comment explaining the situation. Thanks to Andreas
2294 Schwab for pointing this out to me.
2296 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2298 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2299 entries are presorted so that entries with the same mnemonic are
2300 adjacent to each other in the table. Sort the entries for each
2301 instruction so that this is true.
2303 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2305 * m68k-dis.c: Include <libiberty.h>.
2306 (print_insn_m68k): Sort the opcode table on the most significant
2307 nibble of the opcode.
2309 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2311 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2312 "vsub", "vst", "xnor", and "xor" instructions.
2313 (V_a1): Renamed from V_a, msb of accumulator reg number.
2314 (V_a0): Add macro, lsb of accumulator reg number.
2316 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2318 * tic80-dis.c (print_insn_tic80): Broke excessively long
2319 function up into several smaller ones and arranged for
2320 the instruction printing function to be callable recursively
2321 to print vector instructions that have both a load and a
2322 math instruction packed into a single opcode.
2323 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2324 to explain why it comes after the other vector opcodes.
2326 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2328 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2329 move insns to handle immediate operands.
2331 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2333 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2334 fix operand mask in the "moveml" entries for the coldfire.
2336 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2338 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2339 New macros for building vector instruction opcodes.
2340 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2341 FMT_LI, which were unused. The field is now a flags field.
2342 Remove some opcodes that are possible, but illegal, such
2343 as long immediate instructions with doubles for immediate
2344 values. Add "vadd" and "vld" instructions.
2346 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2348 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2349 the order more logical. Move the shift alias instructions ("rotl",
2350 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2351 interspersed with the regular sr.x and sl.x instructions. Add
2352 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2353 "sub", "subu", "swcr", and "trap".
2355 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2357 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2358 (OFF_SL_PC): Renamed from OFF_SL.
2359 (OFF_SS_BR): New operand type for base relative operand.
2360 (OFF_SL_BR): New operand type for base relative operand.
2361 (REG_BASE): New operand type for base register operand.
2362 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2363 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2364 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2366 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2367 10 char field, padded with spaces on rhs, rather than a string
2368 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2369 than old TIC80_OPERAND_RELATIVE. Add support for new
2370 TIC80_OPERAND_BASEREL flag bit.
2372 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2374 * tic80-dis.c (print_insn_tic80): Print floating point operands
2376 * tic80-opc.c (SPFI): Add single precision floating point
2377 immediate operand type.
2378 (ROTATE): Add rotate operand type for shifts.
2379 (ENDMASK): Add for shifts.
2380 (n): Macro for the 'n' bit.
2381 (i): Macro for the 'i' bit.
2382 (PD): Macro for the 'PD' field.
2383 (P2): Macro for the 'P2' field.
2384 (P1): Macro for the 'P1' field.
2385 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2388 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2390 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2391 adding in current address for pc-relative operands.
2393 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2395 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2396 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2397 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2398 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2399 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2400 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2401 (REG_SCALED, LSI_SCALED): New operand types.
2402 (E): New macro for 'E' bit at bit 27.
2403 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2404 opcodes, including the various size flavors (b,h,w,d) for
2405 the direct load and store instructions.
2407 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2409 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2411 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2412 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2413 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2414 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2415 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2416 masks with "MASK_* & ~M_*" to get the M bit reset.
2417 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2419 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2421 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2422 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2423 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2425 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2426 CC, SICR, and LICR table entries.
2427 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2428 "bcnd", and "brcr" opcodes.
2430 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2432 * ppc-opc.c (powerpc_operands): Make comment match the
2433 actual fields (no shift field).
2434 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2435 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2436 partial implementation, work in progress.
2437 * tic80-opc.c (tic80_operands): Begin construction operands table.
2438 (tic80_opcodes): Continue populating opcodes table and start
2439 filling in the operand indices.
2440 (tic80_num_opcodes): Add this.
2442 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2444 * m68k-opc.c: Add #B case for moveq.
2446 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2448 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2449 before they are used.
2451 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2453 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2454 for "breakpoint" instruction.
2456 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2458 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2459 (dep): Use ALL_CFLAGS rather than CFLAGS.
2461 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2463 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2466 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2468 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2469 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2471 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2473 * mips16-opc.c: Add "abs".
2475 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2477 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2478 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2479 (disassembler): Add bfd_arch_tic80 support to set disassemble
2480 to print_insn_tic80.
2481 * tic80-dis.c (print_insn_tic80): Add stub.
2483 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2485 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2486 * configure: Regenerate with autoconf.
2487 * tic80-dis.c: Add file.
2488 * tic80-opc.c: Add file.
2490 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2492 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2494 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2496 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2497 (mn10200_opcodes): Use it for some logicals and btst insns.
2498 Add "break" and "trap" instructions.
2500 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2502 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2504 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2506 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2507 relative load or add now depends upon whether the instruction is
2510 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2512 * mn10200-dis.c: Finish writing disassembler.
2513 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2514 Fix mask for "jmp (an)".
2516 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2517 handle endianness issues for mn10300.
2519 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2521 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2523 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2524 instruction. Fix opcode field for "movb (imm24),dn".
2526 * mn10200-opc.c (mn10200_operands): Fix insertion position
2529 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2531 * mn10200-opc.c: Create mn10200 opcode table.
2532 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2533 but moving along nicely.
2535 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2537 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2539 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2541 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2542 specifiers for fmovem* instructions.
2544 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2546 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2548 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2550 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2553 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2555 * mn10300-opc.c: Add some comments explaining the various
2558 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2560 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2562 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2565 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2566 operand specifiers in fmovm* instructions.
2568 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2570 * ppc-opc.c (insert_li): Give an error if the offset has the two
2571 least significant bits set.
2573 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2575 * mips-dis.c (print_insn_mips16): Separate the instruction from
2576 the arguments with a tab, not a space.
2578 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2580 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2583 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2586 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2588 * configure: Rebuild with autoconf 2.12.
2590 Add support for mips16 (16 bit MIPS implementation):
2591 * mips16-opc.c: New file.
2592 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2593 (mips16_reg_names): New static array.
2594 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2595 after seeing a 16 bit symbol.
2596 (print_insn_little_mips): Likewise.
2597 (print_insn_mips16): New static function.
2598 (print_mips16_insn_arg): New static function.
2599 * mips-opc.c: Add jalx instruction.
2600 * Makefile.in (mips16-opc.o): New target.
2601 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2602 * configure: Rebuild.
2604 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2606 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2607 operand specifiers in *save, *restore and movem* instructions.
2609 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2612 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2613 register operands for immediate arithmetic, not, neg, negx, and
2614 set according to condition instructions.
2616 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2617 specifier of the effective-address operand in immediate forms of
2618 arithmetic instructions. The specifier for the immediate operand
2619 notes how and where the constant will be stored.
2621 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2623 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2626 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2629 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2631 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2633 * mn10300-dis.c (disassemble): Handle register lists.
2635 * mn10300-opc.c: Fix handling of register list operand for
2636 "call", "ret", and "rets" instructions.
2638 * mn10300-dis.c (disassemble): Print PC-relative and memory
2639 addresses symbolically if possible.
2640 * mn10300-opc.c: Distinguish between absolute memory addresses,
2641 pc-relative offsets & random immediates.
2643 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2645 (disassemble): Handle SPLIT and EXTENDED operands.
2647 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-dis.c: Rough cut at printing some operands.
2651 * mn10300-dis.c: Start working on disassembler support.
2652 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2654 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2656 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2658 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2660 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2662 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2664 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2665 register argument is calls and jmp instructions.
2667 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2669 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2670 getx operand. Fix opcode for mulqu imm,dn.
2672 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2674 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2675 in MN10300_OPERAND_SPLIT operands for how many bits
2676 appear in the basic insn word. Add IMM32_HIGH24,
2677 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2678 (mn10300_opcodes): Use new operands as needed.
2680 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2681 for bset, bclr, btst instructions.
2682 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2684 * mn10300-opc.c (mn10300_operands): Remove many redundant
2685 operands. Update opcode table as appropriate.
2686 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2687 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2689 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2691 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2692 operands (for indexed load/stores). Fix bitpos for DI
2693 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2694 few instructions that insert immediates/displacements in the
2695 middle of the instruction. Add IMM8E for 8 bit immediate in
2696 the extended part of an instruction.
2697 (mn10300_operands): Use new opcodes as appropriate.
2699 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2701 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2702 sequential so the assembler never parallelizes it with
2705 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2707 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2708 a data/address register that appears in register field 0
2709 and register field 1.
2710 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2712 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2714 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2715 standard disassembly.
2717 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2718 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2719 Recategorize PALcode instructions.
2721 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2723 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2725 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2727 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2728 there are no operand types.
2730 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2732 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2734 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2736 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2738 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2740 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2742 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2743 and sst.w instructions.
2745 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2748 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2750 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2753 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2755 * ppc-opc.c (PPCPWR2): Define.
2756 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2759 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2761 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2762 field for movhu instruction.
2764 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2765 cast value to "long" not "signed long" to keep hpux10
2768 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2770 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2773 * mn10300-opc.c (FMT*): Remove definitions.
2775 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2776 for shift-by-register opcodes.
2778 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2779 into [AD][MN][01] for encoding the position of the register
2782 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2784 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2785 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2787 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2789 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2790 Fix various typos. Add "PAREN" operand.
2791 (MEM, MEM2): Define.
2792 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2793 operands. Fix several typos.
2795 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2798 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2800 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2801 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2803 (mn10300_opcodes): Break opcode format out into its own field.
2804 Update many operand fields to deal with signed vs unsigned
2805 issues. Fix one or two typos in the "mov" instruction
2806 opcode, mask and/or operand fields.
2808 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2810 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2811 m68851 wasn't reset.
2813 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2815 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2816 all opcodes. Very rough cut at operands for all opcodes.
2818 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2821 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2823 * mn10200-opc.c, mn10300-opc.c: New files.
2824 * mn10200-dis.c, mn10300-dis.c: New files.
2825 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2826 * disassemble.c: Break mn10x00 support into 10200 and 10300
2828 * configure.in: Likewise.
2829 * configure: Rebuilt.
2831 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2833 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2835 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2837 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2839 * disassemble (ARCH_mn10x00): Define.
2840 (disassembler): Handle bfd_arch_mn10x00.
2841 * configure.in: Recognize bfd_mn10x00_arch.
2842 * configure: Rebuilt.
2844 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2846 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2847 accordingly. Don't declare functions using op_rtn.
2849 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2851 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2852 params to be more standard.
2853 * (disassemble): Print absolute addresses and symbolic names for
2854 branch and jump targets.
2855 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2857 * (v850_opcodes): Add breakpoint insn.
2859 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2861 * m68k-opc.c: Move the fmovemx data register cases before the
2862 other cases, so that they get recognized before the data register
2863 does gets treated as a degenerate register list.
2865 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2867 * mips-opc.c: Add a case for "div" and "divu" with two registers
2868 and a destination of $0.
2870 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2872 * mips-dis.c (print_insn_arg): Add prototype.
2873 (_print_insn_mips): Ditto.
2875 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2877 * mips-dis.c (print_insn_arg): Print condition code registers as
2880 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2882 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2884 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2886 * v850-dis.c (disassemble): Make static. Provide prototype.
2888 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2890 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2893 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2895 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2896 ']' characters into the output stream.
2897 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2898 Add "memop" field to all opcodes (for the disassembler).
2899 Reorder opcodes so that "nop" comes before "mov" and "jr"
2900 comes before "jarl".
2902 * v850-dis.c (print_insn_v850): Fix typo in last change.
2904 * v850-dis.c (print_insn_v850): Properly handle disassembling
2905 a two byte insn at the end of a memory region when the memory
2906 region's size is only two byte aligned.
2908 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2910 * v850-dis.c (v850_reg_names): Define.
2911 (v850_sreg_names, v850_cc_names): Likewise.
2912 (disassemble): Very rough cut at printing operands (unformatted).
2914 * v850-opc.c (BOP_MASK): Fix.
2915 (v850_opcodes): Fix mask for jarl and jr.
2917 * v850-dis.c: New file. Skeleton for disassembler support.
2918 * Makefile.in Remove v850 references, they're not needed here.
2919 * configure.in: Add v850-dis.o when building v850 toolchains.
2920 * configure: Rebuilt.
2921 * disassemble.c (disassembler): Call v850 disassembler.
2923 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2924 (insert_d8_6, extract_d8_6): New functions.
2925 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2926 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2928 (IF4A, IF4B): Use "D7" instead of "D7S".
2929 (IF4C, IF4D): Use "D8_7" instead of "D8".
2930 (IF4E, IF4F): New. Use "D8_6".
2931 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2932 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2934 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2935 (v850_operands): Change D16 to D16_15, use special insert/extract
2936 routines. New new D16 that uses the generic insert/extract code.
2937 (IF7A, IF7B): Use D16_15.
2938 (IF7C, IF7D): New. Use D16.
2939 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2941 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2942 message. Issue an error if the branch offset is odd.
2944 * v850-opc.c: Add notes about needing special insert/extract
2945 for all the load/store insns, except "ld.b" and "st.b".
2947 * v850-opc.c (insert_d22, extract_d22): New functions.
2948 (v850_operands): Use insert_d22 and extract_d22 for
2950 (insert_d9): Fix range check.
2952 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2954 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2955 and set bits field to D9 and D22 operands.
2957 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2959 * v850-opc.c (v850_operands): Define SR2 operand.
2960 (v850_opcodes): "ldsr" uses R1,SR2.
2962 * v850-opc.c (v850_opcodes): Fix opcode specs for
2963 sld.w, sst.b, sst.h, sst.w, and nop.
2965 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2967 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2968 end of the opcode table.
2970 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2972 * d10v-opc.c (pre_defined_registers): Added register pairs,
2973 "r0-r1", "r2-r3", etc.
2975 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2977 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2978 Create I16U for an unsigned 16bit mmediate operand.
2979 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2981 * v850-opc.c (v850_operands): Define EP operand.
2982 (IF4A, IF4B, IF4C, IF4D): Use EP.
2984 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2985 with immediate operand, "movhi". Tweak "ldsr".
2987 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2988 correct. Get sld.[bhw] and sst.[bhw] closer.
2990 * v850-opc.c (v850_operands): "not" is a two byte insn
2992 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2994 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2996 * v850-opc.c (two): Get order of words correct.
2998 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3000 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3001 register source and destination operands.
3002 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3004 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3005 same thinko in "trap" opcode.
3007 * v850-opc.c (v850_opcodes): Add initializer for size field
3010 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3011 Add D8 for 8-bit unsigned field in short load/store insns.
3012 (IF4A, IF4D): These both need two registers.
3013 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3014 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3015 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3016 for "ldsr" and "stsr".
3017 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3020 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3021 short store word (sst.w).
3023 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3025 * v850-opc.c (v850_operands): Added insert and extract fields,
3026 pointers to functions that handle unusual operand encodings.
3028 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3030 * v850-opc.c (v850_opcodes): Enable "trap".
3032 * v850-opc.c (v850_opcodes): Fix order of displacement
3033 and register for "set1", "clr1", "not1", and "tst1".
3035 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3037 * v850-opc.c (v850_operands): Add "B3" support.
3038 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3041 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3043 * v850-opc.c: Close unterminated comment.
3045 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3047 * v850-opc.c (v850_operands): Add flags field.
3048 (v850_opcodes): add move opcodes.
3050 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3052 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3053 * configure: (bfd_v850v_arch) Add new case.
3054 * configure.in: (bfd_v850_arch) Add new case.
3055 * v850-opc.c: New file.
3057 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3059 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3061 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3063 * d10v-opc.c: Add additional information to the opcode
3064 table to help determinine which instructions can be done
3067 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3069 * mpw-make.sed: Update editing of include pathnames to be
3072 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3074 * arm-opc.h: Added "bx" instruction definition.
3076 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3078 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3080 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3082 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3084 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3086 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3088 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3090 * makefile.vms: Update for alpha-opc changes.
3092 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3094 * i386-dis.c (print_insn_i386): Actually return the correct value.
3095 (ONE, OP_ONE): #ifdef out; not used.
3097 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3099 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3100 Changed subi operand type to treat 0 as 16.
3102 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3104 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3107 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3109 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3110 memory transfer instructions. Add new format string entries %h and %s.
3111 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3114 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3116 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3117 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3119 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3121 * alpha-dis.c (print_insn_alpha_osf): Remove.
3122 (print_insn_alpha_vms): Remove.
3123 (print_insn_alpha): Make globally visible. Chose the register
3124 names based on info->flavour.
3125 * disassemble.c: Always return print_insn_alpha for the alpha.
3127 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3129 * d10v-dis.c (dis_long): Handle unknown opcodes.
3131 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3133 * d10v-opc.c: Changes to support signed and unsigned numbers.
3134 All instructions with the same name that have long and short forms
3135 now end in ".l" or ".s". Divs added.
3136 * d10v-dis.c: Changes to support signed and unsigned numbers.
3138 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3140 * d10v-dis.c: Change all functions to use info->print_address_func.
3142 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3144 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3145 move ccr/sr insns more strict so that the disassembler only
3146 selects them when the addressing mode is data register.
3148 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3149 * d10v-opc.c (pre_defined_registers): Declare.
3150 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3151 to pick a better name for the registers.
3153 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3155 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3156 operands for fexpand and fpmerge. From Christian Kuehnke
3157 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3159 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3161 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3162 print routine. Take new regnames and cpumask arguments.
3163 Kill the environment variable nonsense.
3164 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3165 (print_insn_alpha_vms): New function. Do VMS style regnames.
3166 * disassemble.c (disassembler): Test bfd flavour to pick
3167 between OSF and VMS routines. Default to OSF.
3169 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3171 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3172 * configure: Rebuild.
3173 * Makefile.in (install): Use @INSTALL_SHLIB@.
3175 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3177 * configure: (bfd_d10v_arch) Add new case.
3178 * configure.in: (bfd_d10v_arch) Add new case.
3179 * d10v-dis.c: New file.
3180 * d10v-opc.c: New file.
3181 * disassemble.c (disassembler) Add entry for d10v.
3183 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3185 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3186 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3188 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3190 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3191 distinguish between variants of the instruction set.
3192 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3193 distinguish between variants of the instruction set.
3195 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3197 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3198 the 8086 instruction set.
3199 * i386-dis.c: General cleanups. Make most things static. Add
3200 prototypes. Get rid of static variables aflags and dflags. Pass
3201 them as args (to almost everything).
3203 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3205 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3207 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3209 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3210 if the next arg is marked with SRC_IN_DST. Gross.
3212 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3213 we're looking for and find EXR.
3215 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3216 if we're looking for KBIT and we don't find it.
3218 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3221 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3222 3bit immediate operands.
3224 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3226 * Released binutils 2.7.
3228 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3229 <kkaempf@progis.ac-net.de>.
3231 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3233 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3235 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3237 * sparc-dis.c (print_insn_sparclite): New routine to print
3238 sparclite instructions.
3240 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3242 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3244 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3246 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3247 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3248 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3250 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3252 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3253 Use autoconf-set values.
3254 (docdir, oldincludedir): Removed.
3255 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3257 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3259 * alpha-opc.c: New file.
3260 * alpha-opc.h: Remove.
3261 * alpha-dis.c: Complete rewrite to use new opcode table.
3262 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3263 * configure: Rebuild with autoconf 2.10.
3264 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3265 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3267 (alpha-opc.o): New target.
3269 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3271 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3272 Set imm_added_to_rs1 even if the source and destination register
3275 * sparc-opc.c: Add some two operand forms of the wr instruction.
3277 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3279 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3282 * disassemble.c (disassembler): Handle H8/S.
3283 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3285 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3287 * sparc-opc.c: Add beq/teq as aliases for be/te.
3289 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3290 <sergei@msil.sps.mot.com>.
3292 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3294 * makefile.vms: New file.
3296 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3298 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3303 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3305 * i386-dis.c (OP_OFF): Call append_prefix.
3307 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3309 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3310 unsigned long to silence a warning from the Solaris PowerPC
3313 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3315 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3317 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3319 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3321 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3322 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3323 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3324 cpush, cpusha, cpull sparclet insns.
3326 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3328 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3330 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3332 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3333 Set F_FLOAT on other floating point instructions.
3335 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3337 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3339 (powerpc_opcodes): Add 860/821 specific SPRs.
3341 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3343 * configure.in: Permit --enable-shared to specify a list of
3344 directories. Set and substitute BFD_PICLIST.
3345 * configure: Rebuild.
3346 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3347 uses. Set to @BFD_PICLIST@.
3349 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3351 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3352 not "abs", which may be needed for the absolute in something
3353 like btst #0,@10:8. Print L_3 immediates separately from other
3354 immediates. Change ABSMOV reference to ABS8MEM.
3356 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3358 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3359 (current_arch_mask): New static global.
3360 (compute_arch_mask): New static function.
3361 (print_insn_sparc): Delete sparc_v9_p. New static local
3362 current_mach. Resort opcode table if current_mach changes.
3363 Generalize "insn not supported" test.
3364 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3365 Delete test for v9/!v9.
3366 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3368 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3369 (brfcx): Renamed to FBRX.
3370 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3371 coprocessor mnemonics are not supported on the sparclet).
3372 (condf): Renamed to CONDF.
3373 (SLCBCC2): Delete F_ALIAS flag.
3375 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3377 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3378 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3380 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3382 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3383 that the shared library version number is set correctly.
3385 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3387 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3388 Miles Bader <miles@gnu.ai.mit.edu>.
3389 * configure: Rebuild.
3391 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3393 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3396 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3398 * configure: Rebuild with autoconf 2.8.
3400 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3402 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3403 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3405 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3407 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3408 since they appear as targets in Makefile.in.
3409 * configure: Rebuild.
3411 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3413 * mpw-make.sed: Edit out shared library support bits.
3415 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3417 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3418 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3419 (sparc_opcodes): Add sparclet insns.
3420 (sparclet_cpreg_table): New static local.
3421 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3422 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3424 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3426 * i386-dis.c (index16): New static variable.
3427 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3429 (OP_indirE): Return result of OP_E.
3430 (OP_E): Check for 16 bit addressing mode, and disassemble
3431 correctly. Optimised 32 bit case a little. Don't print
3432 "(base,index,scale)" when sib specifies only an offset.
3434 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3436 * configure.in: Set and substitute SHLIB_DEP.
3437 * configure: Rebuild.
3438 * Makefile.in (SHLIB_DEP): New variable.
3439 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3440 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3441 COMMON_SHLIB, add them to piclist with appropriate modifications.
3442 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3443 here: just use piclist.
3445 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3447 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3448 (print_insn_sparc): Rewrite v9/not-v9 tests.
3449 (compare_opcodes): Likewise.
3450 * sparc-opc.c (MASK_<ARCH>): Define.
3451 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3452 (sparclet,v6notv9): Define.
3453 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3454 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3456 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3458 * configure.in: Call AC_PROG_CC before configure.host.
3459 * configure: Rebuild.
3461 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3463 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3465 * i386-dis.c (onebyte_has_modrm): New static array.
3466 (twobyte_has_modrm): New static array.
3467 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3469 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3474 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3476 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3479 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3481 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3482 m68010up, not just m68020up | cpu32.
3484 * Makefile.in (SONAME): New variable.
3485 ($(SHLINK)): Make a link to the transformed name, as well.
3486 (stamp-tshlink): New target.
3487 (install): Skip stamp-tshlink during install.
3489 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3491 * configure.in: Call AC_ARG_PROGRAM.
3492 * configure: Rebuild.
3493 * Makefile.in (program_transform_name): New variable.
3494 (install): Transform library name before installing it.
3496 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3498 * i960-dis.c (mem): Add HX dcinva instruction.
3500 Support for building as a shared library, based on patches from
3501 Alan Modra <alan@spri.levels.unisa.edu.au>:
3502 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3503 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3504 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3505 * configure: Rebuild.
3506 * Makefile.in (ALLLIBS): New variable.
3507 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3508 (COMMON_SHLIB, SHLINK): New variables.
3509 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3510 (STAGESTUFF): Remove variable.
3511 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3512 (stamp-piclist, piclist): New targets.
3513 ($(SHLIB), $(SHLINK)): New targets.
3514 ($(OFILES)): Depend upon stamp-picdir.
3515 (disassemble.o): Build twice if PICFLAG is set.
3516 (MOSTLYCLEAN): Add pic/*.o.
3517 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3518 (distclean): Remove pic and stamp-picdir.
3519 (install): Install shared libraries.
3520 (stamp-picdir): New target.
3522 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3524 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3525 Print unknown instruction as "unknown", rather than in hex.
3527 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3529 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3531 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3533 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3535 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3537 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3538 when necessary. From Ulrich Drepper
3539 <drepper@myware.rz.uni-karlsruhe.de>.
3541 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3543 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3544 sparc_num_opcodes. Update architecture enum values.
3545 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3546 (sparc_opcode_lookup_arch): New function.
3547 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3548 (sparc_opcodes): Add v9a shutdown insn.
3550 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3552 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3553 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3555 (print_insn_sparc64): Deleted.
3556 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3559 * sparc-opc.c (architecture_pname): Add v9a.
3561 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3563 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3564 incorrectly defined as 0x16 when it should be 0x15.
3565 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3566 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3567 excb (exception barrier) which is defined in the Alpha
3568 Architecture Handbook version 2.
3569 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3570 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3571 disassembled as or, for example.
3573 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3575 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3576 (_print_insn_mips): Change i from int to unsigned int.
3578 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3580 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3581 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3583 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3585 * i386-dis.c: Added Pentium Pro instructions.
3587 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3589 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3592 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3594 * sh-opc.h (sh_nibble_type): Added REG_B.
3595 (sh_arg_type): Added A_REG_B.
3596 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3598 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3600 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3602 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3604 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3606 * Makefile.in (distclean): Remove stamp-h. From Ronald
3607 F. Guilmette <rfg@monkeys.com>.
3609 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3611 From David Mosberger-Tang <davidm@azstarnet.com>:
3612 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3615 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3617 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3618 (sh_table): Added many SH3 opcodes.
3619 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3621 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3623 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3624 (subco,subco.): Mark this PPC, not PPCCOM.
3626 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3628 * configure: Rebuild with autoconf 2.7.
3630 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3632 * configure: Rebuild with autoconf 2.6.
3634 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3636 * configure.in: Sort list of architectures. Accept but do nothing
3637 for alliant, convex, pyramid, romp, and tahoe.
3639 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3641 * a29k-dis.c (print_special): Change num to unsigned int.
3643 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3645 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3648 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3650 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3651 * configure: Rebuilt.
3653 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3655 * configure.in: Add case for bfd_i860_arch.
3656 * configure: Rebuild.
3658 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3660 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3661 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3662 (NEXTDOUBLE): Likewise.
3663 (print_insn_m68k): Don't match fmoveml if there is more than one
3664 register in the list.
3665 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3667 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3669 * m68k-opc.c: Use #W rather than #w.
3670 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3672 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3674 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3675 and likewise for all the dbxx opcodes.
3677 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3679 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3681 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3683 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3684 the VR4100 specific instructions to the mips_opcodes structure.
3686 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3688 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3689 ugly Metrowerks bug in CW6, is fixed in CW7.
3691 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3693 * ppc-opc.c (whole file): Add flags for common/any support.
3695 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3697 * Makefile.in (BISON): Remove macro.
3698 (FLAGS_TO_PASS): Remove BISON.
3700 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3702 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3704 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3705 instructions that take no args by looking at the match mask.
3706 (print_insn_arg): Always print "%" before register names.
3707 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3708 [case '_']: Don't print "@#" before address.
3709 [case 'J']: Use "%s" as format string, not register name.
3710 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3712 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3714 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3717 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3719 From David Mosberger-Tang <davidm@azstarnet.com>
3721 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3722 (alpha_insn_set): added definitions for VAX floating point
3723 instructions (Unix compilers don't generate these, but handcoded
3724 assembly might still use them).
3726 * alpha-dis.c (print_insn_alpha): added support for disassembling
3727 the miscellaneous instructions in the Alpha instruction set.
3729 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3731 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3732 no longer create sysdep.h, sed ppc-opc.c to work around a
3733 serious Metrowerks C bug.
3734 * mpw-make.in: Remove.
3735 * mpw-make.sed: New file, used by mpw-configure to edit
3736 Makefile.in into an MPW makefile.
3738 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3740 * Makefile.in (maintainer-clean): New synonym for realclean.
3742 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3744 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3745 which use '0', '1', and '2' instead. Specify the proper size for
3746 a pmove immediate operand. Correct the pmovefd patterns to be
3747 moves to a register, not from a register.
3748 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3750 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3752 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3753 %psr, %wim, %tbr as F_NOTV9.
3755 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3757 * Makefile.in (Makefile): Just rebuild Makefile when running
3759 (config.h, stamp-h): New targets.
3760 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3761 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3762 rebuilding config.h.
3763 * configure: Rebuild.
3765 * mips-opc.c: Change unaligned loads and stores with "t,A"
3766 operands to use "t,A(b)".
3768 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3770 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3772 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3774 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3775 until 3 instead of until 2.
3777 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3779 * Makefile.in (ALL_CFLAGS): Define.
3780 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3781 (MOSTLYCLEAN): Add config.log.
3782 (distclean): Don't remove config.log.
3783 * configure.in: Substitute HDEFINES.
3784 * configure: Rebuild.
3786 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3788 * sh-opc.h (sh_arg_type): Add F_FR0.
3789 (sh_table, case fmac): Add F_FR0 as first argument.
3791 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3793 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3795 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3797 * sparc-dis.c: Remove all references to NO_V9.
3799 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3801 * aclocal.m4: Just include ../bfd/aclocal.m4.
3802 * configure: Rebuild.
3804 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3806 * sparc-dis.c (X_DISP19): Define.
3807 (print_insn, case 'G'): Use it.
3808 (print_insn, case 'L'): Sign extend displacement.
3810 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3812 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3813 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3814 host_makefile_frag or frags.
3815 * aclocal.m4: New file.
3816 * configure: Rebuild.
3817 * Makefile.in (INSTALL): Set to @INSTALL@.
3818 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3819 (INSTALL_DATA): Set to @INSTALL_DATA@.
3821 (AR_FLAGS): Set to rc rather than qc.
3822 (CC): Define as @CC@.
3823 (CFLAGS): Set to @CFLAGS@.
3824 (@host_makefile_frag@): Remove.
3825 (config.status): Remove dependency upon @frags@.
3827 * configure.in: ../bfd/config.bfd now just sets shell variables.
3828 Use them rather than looking through target Makefile fragments.
3829 * configure: Rebuild.
3831 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3833 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3835 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3837 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3838 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3841 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3842 (lookup_{name,value}): New functions.
3843 (prefetch_table): New static local.
3844 (sparc_{encode,decode}_prefetch): New functions.
3845 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3847 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3849 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3852 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3854 * sh-dis.c: Correct comment on first line of file.
3856 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3858 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3860 * sparc-opc.c (asi, membar): New static locals.
3861 (sparc_{encode,decode}_{asi,membar}): New functions.
3862 (sparc_opcodes, membar insn): Fix.
3863 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3864 Support decoding of membar masks.
3867 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3869 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3871 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3873 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3874 and likewise for the other branches. Add bhs as an alias for bcc,
3875 and likewise for the size variants. Add dbhs as an alias for
3878 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3880 * sh-opc.h (FP sts instructions): Update to match reality.
3882 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3884 * m68k-dis.c: (fpcr_names): Add % before all register names.
3885 (reg_names): Likewise.
3886 (print_insn_arg): Don't explicitly print % before register names.
3887 Add % before register names in static array names. In case 'r',
3888 print data registers as `@(Dn)', not `Dn@'. When printing a
3889 memory address, don't print @# before it.
3890 (print_indexed): Change base_disp and outer_disp from int to
3891 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3892 syntax. Sign extend 8 byte displacement correctly.
3893 (print_base): Print using MIT syntax. Print zpc when appropriate.
3894 Change parameter disp from int to bfd_vma.
3896 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3899 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3901 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3902 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3903 * sh-opc.h (sh_arg_type): Add new operand types.
3904 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3906 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3908 * Makefile.in (distclean): Remove generated file config.h.
3910 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3912 * Makefile.in (distclean): Remove generated file config.h.
3914 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3916 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3918 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3920 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3921 rather than numopcodes. Use m68k_opcodes rather than removed
3922 opcode function. Don't check F_ALIAS.
3923 (print_insn_arg): Change first parameter to be const char *.
3924 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3925 (m68k-opc.o): New target.
3926 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3927 * configure: Rebuild.
3929 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3931 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3932 (opcode_bits, opcode_hash_table): New variables.
3933 (opcodes_initialized): Renamed from opcodes_sorted.
3934 (build_hash_table): New function.
3935 (is_delayed_branch): Use hash table.
3936 (print_insn): Renamed from print_insn_sparc, made static.
3937 Build and use hash table. If !sparc64, ignore sparc64 insns,
3938 and vice-versa if sparc64.
3939 (print_insn_sparc, print_insn_sparc64): New functions.
3940 (compare_opcodes): Move sparc64 opcodes to end.
3941 Print commutative insns with constant second.
3942 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3944 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3946 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3947 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3948 avoids printing a delay slot in a delay slot.
3949 * sh-opc.h (sh_table): Fully bracket last entry.
3951 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3953 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3955 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3957 * configure.in: Get host_makefile_frag from ${srcdir}.
3959 * configure.in: Autoconfiscated. Check for string[s].h. Create
3960 config.h from config.in. Don't set up sysdep.h link.
3961 * sysdep.h: New file.
3962 * configure, config.in: New files, generated from configure.in.
3963 * Makefile.in: Updated to be processed autoconf-style.
3964 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3965 (Makefile): Depend on config.status.
3966 (config.status): New rule.
3967 * configure.bat: Update Makefile substitutions.
3969 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3971 * mips-opc.c (L1): Define.
3972 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3973 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3976 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3978 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3979 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3980 have multiple add units but only a single logical unit.
3982 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3983 shifted by 18, without any insertion or extraction function.
3984 (insert_cr, extract_cr): Remove.
3986 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3988 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3991 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3993 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3994 * sh-opc.h: Add copyright.
3996 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3998 * Makefile.in (crunch-m68k): Delete extra target accidentally
3999 checked in a while ago.
4001 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4003 * sh-opc.h (sh_table): Add SH3 support.
4005 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4007 * sh-opc.h: Added bsrf and braf.
4009 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4011 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4012 bogus [ls]fm{ea,fd} patterns.
4014 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4015 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4016 initialize it from memory. Make function static.
4017 (print_insn_{big,little}_arm): New functions.
4018 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4019 the correct endianness.
4021 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4023 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4026 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4028 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4029 17th, so that it builds again using GCC as the compiler.
4031 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4033 * mips-dis.c (print_insn_little_mips): Cast return value from
4034 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4035 expects an unsigned long, and that might be fewer words of
4036 argument storage (e.g., if bfd_vma is long long on a 32-bit
4038 (print_insn_big_mips): Likewise with bfd_getb32 value.
4039 (_print_insn_mips): Now static.
4041 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4043 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4044 gcc memory hog problem with initializer is fixed.
4046 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4048 Merge in support for Mac MPW as a host.
4049 (Old change descriptions retained for informational value.)
4051 * mpw-config.in (archname): Compute from the config.
4052 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4054 * mpw-config.in (target_arch): Compute from canonical target.
4055 (m68k, mips, powerpc, sparc): Add architectures.
4056 * mpw-make.in (disassemble.c.o): Add.
4057 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4059 * mpw-config.in (BFD_MACHINES): Set to a default value.
4060 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4062 * mpw-make.in (CSEARCH): Add extra-include to search path.
4064 * mpw-config.in (varargs.h): Don't create.
4065 (sysdep.h): Create using forward-include.
4066 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4068 * mpw-config.in: New file, MPW version of configure.in.
4069 * mpw-make.in: New file, MPW version of Makefile.in.
4071 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4073 * alpha-dis.c (print_insn_alpha): Put empty statement after
4076 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4078 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4079 (low_sign_extend): Likewise.
4080 (get_field): Delete unused function.
4081 (set_field, deposit_14, deposit_21): Likewise.
4083 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4085 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4088 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4090 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4092 * alpha-opc.h (OSF_ASMCODE): define
4093 print pal-code names as defined in App C of the
4094 Alpha Architecture Reference Manual
4096 * alpha-dis.c: cleaned up output
4097 print stylized code forms as defined in App A.4.3 of the
4098 Alpha Architecture Reference Manual
4100 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4104 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4107 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4109 * m68k-dis.c (opcode): New function. Returns address of opcode
4110 table entry given index, even if the opcode table was split to
4111 work around gcc bugs.
4112 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4114 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4115 (reg_names): Now const.
4116 (print_insn_arg): Arrays cacheFieldName and names now const.
4117 (print_indexed): Array scales now const.
4119 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4121 * ppc-opc.c: Sort recently added instructions by minor opcode
4122 number within major opcode number.
4124 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4126 * hppa-dis.c: Include libhppa.h.
4128 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4130 * mips-opc.c: Change dli to use M_DLI, and add dla.
4132 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4134 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4136 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4138 * mips-opc.c: Add r4650 mul instruction.
4140 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * mips-opc.c: Add uld and usd macros for unaligned double load and
4145 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4147 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4148 mfdcr, mtdcr, icbt, iccci.
4150 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4152 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4153 signed char fields to shorts, more portable.
4155 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4157 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4158 char fields as signed chars, since they may have negative values.
4160 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4162 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4163 (mycroft@netbsd.org).
4165 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4167 From "Logg, Ed" <elogg@ea.com>:
4168 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4169 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4172 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4174 * ppc-opc.c: Changes based on patch from David Edelsohn
4175 <edelsohn@mhpcc.edu>.
4176 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4179 (insert_tbr): New static function.
4180 (extract_tbr): New static function.
4181 (XFXFXM_MASK, XFXM): Define.
4182 (XSPRBAT_MASK, XSPRG_MASK): Define.
4183 (powerpc_opcodes): Add instructions to access special registers by
4184 name. Add mtcr and mftbu.
4186 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4188 * mips-opc.c (P3): Define.
4189 (mips_opcodes): Add mad and madu.
4191 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4193 * configure.in: Add W65 support.
4194 * disassemble.c: Likewise.
4195 * w65-opc.h, w65-dis.c: New files.
4197 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4199 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4202 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4204 * mips-opc.c: Add dli as a synonym for li.
4206 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4208 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4209 print something for reserved opcode values, even if it won't
4212 * mips-dis.c (_print_insn_mips): When initializing, shift right
4213 and mask, to avoid sign extension problems on the Alpha.
4215 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4218 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4220 * sh-opc.h (mov.l gbr): Get direction right.
4221 * sh-dis.c (print_insn_shx): New function.
4222 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4223 print opcodes with right byte order.
4225 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4227 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4228 to avoid conflicts with getopt.
4230 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4232 * hppa-dis.c (print_insn_hppa): Read the instruction using
4233 bfd_getb32, so that it works on a little endian or 64 bit host.
4234 Remove unused local variable op.
4236 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4238 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4239 addu does not work correctly if -mips3.
4241 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4243 * a29k-dis.c (print_special): Add special register names defined
4244 on 29030, 29040 and 29050.
4245 (print_insn): Handle new operand type 'I'.
4247 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4249 * Makefile.in (INSTALL): Use top level install.sh script.
4251 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4253 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4254 that it works on a little endian host.
4256 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4258 * configure.in: Use ${config_shell} when running config.bfd.
4260 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4262 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4264 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4266 * a29k-dis.c (print_insn): Print the opcode.
4268 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4270 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4272 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4274 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4276 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4278 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4279 which store a value into memory.
4281 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4283 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4284 * arm-dis.c, arm-opc.h: New files.
4286 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4288 * Makefile.in (ns32k-dis.o): Add dependency.
4289 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4290 string, not as array of chars.
4292 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4294 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4296 * sparc-opc.c: Added sparclite extended FP operations, and
4297 versions of v9 impdep* instructions permitting specification of
4300 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4302 * i960-dis.c (reg_names): Now const.
4303 (struct sparse_tabent): New type, copied from array type in mem
4305 (ctrl): Local static array ctrl_tab now const.
4306 (cobr): Local static array cobr_tab now const.
4307 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4308 static variable mem_tab no longer explicitly initialized. Changed
4309 mem_init to const array of struct sparse_tabent.
4310 (reg): Local static variable reg_tab no longer explicitly
4311 initialized. Changed reg_init to const array of struct
4313 (ea): Local static array scale_tab now const.
4315 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4318 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4320 * configure.bat: the disassember needs to be enabled for
4321 "objdump -d" to work in djgpp.
4323 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4325 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4326 (invalid_float): Enabled general version, doesn't require running
4327 on ns32k host. Changed to take char* argument, and test for
4328 explicitly specified sizes, instead of using sizeof() on host CPU
4330 (INVALID_FLOAT): Cast first argument.
4331 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4332 list_P032, list_M032): Now const.
4333 (optlist, list_search): Made appropriate arguments now point to
4335 (print_insn_arg): Changed static array of one-character-string
4336 pointers into a static const array of characters; fixed sprintf
4337 statement accordingly.
4339 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4341 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4342 from distribution. A ns32k-dis.c from a previous distribution has
4343 been brought up to date and supports the new interface.
4345 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4347 * configure.in: add bfd_ns32k_arch target support.
4349 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4350 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4352 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4354 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4357 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4359 * h8300-dis.c, mips-dis.c: Don't use true and false.
4361 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4363 * configure.in: Change --with-targets to --enable-targets.
4365 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4367 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4368 opcodes to the first instruction with that opcode, to speed
4369 disassembly of large files. From ralphc@pyramid.com (Ralph
4372 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4374 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4376 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4378 * configure.bat: update to latest makefile.in
4380 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4382 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4383 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4384 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4385 slot insn is in a delay slot.
4386 * z8k-opc.h: (resflg): Fix patterns.
4387 * h8500-opc.h Fix CR insn patterns.
4389 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4391 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4392 "cmpl" before POWER versions, so that gas -many uses them.
4394 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4396 * disassemble.c: New file.
4397 * Makefile.in (OFILES): Add disassemble.o.
4398 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4399 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4400 binutils/configure.in.
4402 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4403 opcode being examined.
4405 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4407 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4408 (insert_ral, insert_ram, insert_ras): New functions.
4409 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4410 RAS for store with update.
4412 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4414 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4415 (edelsohn@npac.syr.edu).
4417 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4419 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4422 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4424 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4426 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4428 * ppc-opc.c (powerpc_operands): The signedp field has been
4429 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4430 instead. Add new operand SISIGNOPT.
4431 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4432 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4433 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4436 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4438 * i386-dis.c (struct private): Renamed to dis_private. `private'
4439 is a reserved word for dynix cc.
4441 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4443 * configure.in: Change error message to refer to bfd/config.bfd
4444 rather than bfd/configure.in.
4446 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4448 * ppc-opc.c: Define POWER2 as short alias flag.
4449 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4452 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4454 * i960-dis.c (print_insn_i960): Don't read a second word for
4455 opcodes 0, 1, 2 and 3.
4457 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4459 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4461 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * m68881-ext.c: Removed; no longer used.
4464 * Makefile.in: Changed accordingly.
4466 * m68k-dis.c (ext_format_68881): Don't declare.
4467 (print_insn_m68k): If an instruction uses place 'i', it uses at
4468 least four fixed bytes.
4469 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4470 extended float, convert to double using floatformat_to_double, not
4471 ieee_extended_to_double, and fetch the data before converting it.
4473 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4475 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4476 davidj@ICSI.Berkeley.EDU (David Johnson).
4478 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4480 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4481 PowerPC uses bdnz[l][a].
4483 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4485 * dis-buf.c, i386-dis.c: Include sysdep.h.
4487 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4489 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4491 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4492 by Motorola PowerPC 601 with PPC_OPCODE_601.
4493 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4494 Disassemble Motorola PowerPC 601 instructions as well as normal
4495 PowerPC instructions.
4497 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4499 * i960-dis.c (reg, mem): Just use a static array instead of
4502 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4504 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4505 condition name index if this is for a negated condition.
4507 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4508 Floating point format for 'H' operand is backwards from normal
4509 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4510 operands (fmpyadd and fmpysub), handle bizarre register
4511 translation correctly for single precision format.
4513 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4514 or 'I' operands if the next format specifier is 'M' (fcmp
4515 condition completer).
4517 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4519 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4520 single number giving a bitmask for the MB and ME fields of an M
4521 form instruction. Change NB to accept 32, and turn it into 0;
4522 also turn 0 into 32 when disassembling. Seperated SH from NB.
4523 (insert_mbe, extract_mbe): New functions.
4524 (insert_nb, extract_nb): New functions.
4525 (SC_MASK): Mask out SA and LK bits.
4526 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4527 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4528 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4529 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4530 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4531 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4532 (powerpc_macros): Define table of macro definitions.
4533 (powerpc_num_macros): Define.
4535 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4536 if PPC_OPERAND_NEXT is set.
4538 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4540 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4541 char. Retrieve contents using bfd_getl32 instead of shifting.
4543 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4545 * ppc-opc.c: New file. Opcode table for PowerPC, including
4546 opcodes for POWER (RS/6000).
4547 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4548 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4549 (CFILES): Add ppc-dis.c.
4550 (ppc-dis.o, ppc-opc.o): New targets.
4551 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4553 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4555 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4556 No space before 'u', 'f', or 'N'.
4558 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4560 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4561 farther than we should.
4563 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4565 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4567 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4569 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4571 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4572 needs it, to prevent reading past the end of a section.
4574 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4577 Removed t,A case for la; always use t,A(b) case.
4579 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 From Ted Lemen <mellon@pepper.ncd.com>
4582 * mips-dis.c (print_insn_arg): Handle 'k'.
4583 * mips-opc.c: Make cache use k, not t.
4585 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4587 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4588 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4589 FLOAT_FORMAT_CODE to put out floating point register names.
4591 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4593 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4595 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4599 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4601 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4602 larger than 32. Moved dsxx32 variants first for disassembler.
4604 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4606 * z8kgen.c, z8k-opc.h: Add full lda information.
4608 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4610 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4611 movb instructions. Any necessary space will be emitted by
4612 the code to handle nullification completers.
4614 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4618 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4620 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4621 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4623 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4625 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4627 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4629 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4630 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4632 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4634 * m88k-dis.c (m88kdis): comment change. Remove space after
4636 (printop): handle new arg types DEC and XREG for m88110.
4638 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4640 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4641 type for absolute branch addresses. Delete special
4642 "ble" and "be" code in 'W' operand code.
4644 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4646 * mips-opc.c: Set hazard information correctly for branch
4647 likely instructions.
4649 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4651 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4652 info->fprintf_func for printing and info->print_address_func for
4655 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4657 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4659 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4661 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4662 Corrected second case of "b" for disassembler.
4664 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4666 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4667 to BFD swapping routines to correspond to BFD name changes.
4669 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4671 * mips-opc.c: Change div machine instruction to be z,s,t rather
4672 than s,t. Change div macro to be d,v,t rather than d,s,t.
4673 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4674 rem and remu which generates only the corresponding div
4675 instruction. This is for compatibility with the MIPS assembler,
4676 which only generates the simple machine instruction when an
4677 explicit destination of $0 is used.
4678 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4680 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4683 WR_31 hazard for bal, bgezal, bltzal.
4685 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4687 * hppa-dis.c (print_insn_hppa): Use print function
4688 from within the disassemble_info, not fprintf_filtered.
4690 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4692 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4693 Law, law@cs.utah.edu.)
4695 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4697 * mips-opc.c ("absu"): Removed.
4700 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4702 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4703 Changed hazard information to distinguish between memory load
4704 delays and coprocessor load delays.
4706 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4708 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4710 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4712 * configure.in: Don't pass cpu to config.bfd.
4714 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * m88k-dis.c (m88kdis): Make class unsigned.
4718 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4720 * alpha-dis.c (print_insn_alpha): One branch format case was
4721 missing the instruction name.
4723 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4725 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4726 Add the arch-specific auxiliary files.
4727 (OFILES): Remove the arch-specific auxiliary files
4728 and use BFD_MACHINES instead of DIS_LIBS.
4729 * configure.in: Set BFD_MACHINES based on --with-targets option.
4731 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4733 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4736 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4738 * sparc-opc.c: Change CONST to const to deal with gcc
4739 -Dconst=__const -traditional.
4741 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4743 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4744 coprocessor instructions out of #if 0, and made them use new
4747 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4749 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4751 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4753 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4754 instruction, for use by the disassembler.
4756 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4757 hand-coded sign extensions that depended on 32-bit host ints.
4758 FIXME, we still depend on big-endian host bitfield ordering.
4759 (sparc_print_insn): Set the insn_info_valid field, and the
4760 other fields that describe the instruction being printed.
4762 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4764 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4765 `jmp' instead of just one of them.
4767 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4769 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4770 (fput_fp_reg_r): Renamed from fput_reg_r.
4771 (fput_fp_reg): New function.
4772 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4774 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4776 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4778 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4780 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4782 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4783 don't output a space.
4785 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4787 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4789 * mips-opc.c: New file, containing opcode table from
4790 ../include/opcode/mips.h.
4791 * Makefile.in: Add it.
4793 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * m88k-dis.c: New file, moved in from gdb and changed to use the
4796 new dis-asm.h disassembler interface.
4797 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4798 (m88k-dis.o): New target.
4800 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4802 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4803 argument string const char * to correspond to opcode/mips.h.
4805 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4807 * mips-dis.c: Updated to account for name changes in new version
4809 * Makefile.in: Added header file dependencies.
4811 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4813 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4815 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4817 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4818 extend, rather than shifts.
4820 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4822 * Makefile.in: Undo 15 June change.
4824 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4826 * m68k-dis.c (print_insn_arg): Change return value to byte count
4828 * m68k-dis.c: Re-write to detect invalid operands before
4829 printing anything, so we can handle this the same way we
4830 handle invalid opcodes.
4832 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4834 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4836 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4838 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4841 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4843 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4845 * configure.in: Do make sysdep.h link.
4846 * Makefile.in: Search ../include. Don't search ../bfd.
4848 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4850 Changes from Jeff Law, law@cs.utah.edu:
4851 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4852 Do not print a space before the completers specified by
4855 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4857 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4858 defined, since gdb has been fixed.
4860 Changes from Jeff Law, law@cs.utah.edu:
4861 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4862 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4863 be a *disassemble_info, not a *FILE.
4864 * hppa-dis.c: Support 'd', '!', and 'a'.
4865 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4866 * hppa-dis.c: Delete cases which are no longer needed.
4868 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4870 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4872 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4874 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4877 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4879 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4880 * configure.in: No longer need to configure to get sysdep.h.
4882 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4884 * Patches from Jeffrey Law <law@cs.utah.edu>.
4885 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4886 templates for 1.1 FP computational instructions.
4888 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4890 * h8500-dis.c (print_insn_h8500): Address argument is type
4892 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4895 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4896 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4898 * sparc-dis.c (compare_opcodes): Move static declaration to
4901 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4903 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4904 instruction, remove unimp hack from 'l' argument.
4906 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4908 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4911 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4913 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4914 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4917 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4919 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4920 arrays of string pointers to 2-d arrays of chars, to save
4923 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4925 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4926 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4928 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4930 * hppa-dis.c: New file from Utah, adapted to new disassembler
4932 * Makefile.in: Include it.
4934 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4936 * sh-dis.c, sh-opc.h: New files.
4938 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4940 * alpha-dis.c, alpha-opc.h: New files.
4942 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4944 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4947 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4949 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4951 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4953 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4956 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4958 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4959 and double percent signs a few places.
4961 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4963 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4964 Use info->print_address_func not print_address.
4966 * dis-buf.c (generic_print_address): New function.
4968 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4970 * Makefile.in: Add sparc-dis.c.
4971 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4973 Add `add' instruction to the set that get checked
4974 for a preceding `sethi' in order to print an absolute address.
4975 * (print_insn): Disassembly prefers real instructions.
4976 (is_delayed_branch): Speed up.
4977 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4978 Still missing some float ops, and needs testing.
4979 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4980 F_ALIAS. Use printf, not fprintf, when not passing a file
4982 (compare_opcodes): Check that identical instructions have
4983 identical opcodes, complain otherwise.
4986 * Include reg_names.
4988 Use dis-asm.h/read_memory_func interface.
4990 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4992 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4993 deliberately return non-zero to setjmp from longjmp. Otherwise
4994 this code fails to compile.
4996 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4998 * m68k-dis.c: Fix prototype for fetch_arg().
5000 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5002 * dis-buf.c: New file, for new read_memory_func interface.
5003 Makefile.in (OFILES): Include it.
5004 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5005 Use new read_memory_func interface.
5007 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5009 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5010 * h8500-opc.h: Fix couple of opcodes.
5012 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5014 * Makefile.in: add dvi & installcheck targets
5016 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5018 * Makefile.in: Update for h8500-dis.c.
5020 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5022 * h8500-dis.c, h8500-opc.h: New files
5024 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5026 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5027 ../include/dis-asm.h.
5028 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5029 and ../gdb/m68k-pinsn.c).
5030 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5031 and ../gdb/i386-pinsn.c).
5032 * m68881-ext.c: New file. Moved definition of
5033 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5034 * Makefile.in: Adjust for new files.
5035 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5036 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5037 can be dis-assembled.
5039 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5041 * mips-dis.c (print_insn_arg): Now returns void.
5043 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5045 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5046 files that use the macros.
5048 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5051 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5052 (CFILES): Added mips-dis.c.
5054 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5056 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5057 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5059 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5061 * Makefile.in: Improve *clean rules.
5062 * configure.in: Allow a default host.
5064 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5066 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5067 files include other sysdep files
5069 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5071 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5073 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5075 * configure.in: For host support, use ../bfd/configure.host
5076 so it stays in sync with the ../bfd/hosts database.
5078 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5080 * configure.in: use cpu-vendor-os triple instead of nested cases
5082 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5084 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5085 *always* the wrong one.
5087 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5089 * z8kgen.c: added copyright info
5091 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5093 * z8k-dis.c (unparse_instr): prettier tabs
5094 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5096 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5098 * configure.in: Add ncr* configuration.
5099 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5100 picayune ANSI compilers happy.
5102 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5104 * configure.in (i386): Make i386 and i486 synonymous for now.
5105 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5107 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5109 * Makefile.in (install): Fix typo.
5111 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5113 * Makefile.in (make): Remove obsolete crud.
5114 (sparc-opc.o): Avoid Sun Make VPATH bug.
5116 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5118 * Makefile.in: since there are no SUBDIRS, remove rule and
5119 references of subdir_do.
5121 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5123 * Makefile.in (install): Get the library name right here too.
5124 Don't install bfd.h, since it's unrelated to this library. No
5125 subdirs to recurse into, either.
5126 (CFILES): The source file has a .c suffix, not .o.
5128 * sparc-opc.c: New file, moved from BFD.
5129 * Makefile.in (OFILES): Build it.
5131 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5133 * z8k-dis.c: fixed forward refferences of some declarations.
5135 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5137 * Makefile.in: get the name of the library right
5139 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5141 * z8k-dis.c: knows how to disassemble z8k stuff
5142 * z8k-opc.h: new file full of z8000 opcodes
5146 version-control: never