1 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * i386-dis.c (Ed): Define.
4 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
6 (OP_rm): Rename to OP_Rd.
9 (putop): Add const to template and p.
10 (print_insn_x86): Delete.
11 (print_insn_i386): Merge old function print_insn_x86. Add const
13 (struct dis386): Add const to name.
14 (dis386_att, dis386_intel): Add const.
15 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
16 (names32, names16, names8, names_seg, index16): Add const.
17 (grps, prefix_user_table, float_reg): Add const.
18 (float_mem_att, float_mem_intel): Add const.
19 (oappend): Add const to s.
20 (OP_REG): Add const to s.
21 (ptr_reg): Add const to s.
22 (dofloat): Add const to dp.
23 (OP_C): Don't skip modrm, it's now done in OP_Rd.
26 (OP_Rd): Check for valid mod. Call Op_E to print.
27 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
28 (OP_MS): Check for valid mod. Call Op_EM to print.
29 (OP_3DNowSuffix): Set obufp and use oappend rather than
30 strcat. Call BadOp() for errors.
31 (OP_SIMD_Suffix): Likewise.
32 (BadOp): New function.
34 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
36 * i386-dis.c (dis386_intel): Remove macro chars, except for
37 jEcxz. Change cWtR and cRtd to cW and cR.
38 (dis386_twobyte_intel): Remove macro chars here too.
39 (putop): Handle R and W macros for intel mode.
41 * i386-dis.c (SIMD_Fixup): New function.
42 (dis386_twobyte_att): Use it on movlps and movhps, and change
43 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
44 (dis386_twobyte_intel): Same here.
46 * i386-dis.c (Av): Remove.
50 (OP_SIMD_Suffix): New function.
51 (OP_DIR): Remove dead code.
52 (eAX_reg..eDI_reg): Renumber.
53 (onebyte_has_modrm): Table numbering comments.
54 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
55 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
56 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
57 and handle SIMD cmp insns in OP_SIMD_Suffix.
58 (info->bytes_per_line): Bump from 5 to 6.
60 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
61 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
63 PIII SIMD support from Doug Ledford <dledford@redhat.com>
64 * i386-dis.c (XM, EX, None): Define.
65 (OP_XMM, OP_EX, OP_None): New functions.
66 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
67 (GRP14): Rename to GRPAMD.
68 (GRP*): Add USE_GROUPS flag.
70 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
71 (twobyte_has_modrm): Add SIMD entries.
72 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
73 (grps): Add SIMD insns.
74 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
75 oappend repz if uses_f3_prefix. Add code to handle new groups for
78 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
79 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
80 operand from Av to Jv.
82 1999-05-07 Nick Clifton <nickc@cygnus.com>
84 * mcore-dis.c (print_insn_mcore): Use .short to display
85 unidentified instructions, not .word.
87 1999-04-26 Tom Tromey <tromey@cygnus.com>
89 * aclocal.m4, configure: Updated for new version of libtool.
91 1999-04-14 Doug Evans <devans@casey.cygnus.com>
93 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
94 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
96 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
98 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
101 1999-04-10 Doug Evans <devans@casey.cygnus.com>
103 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
104 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
106 1999-04-06 Ian Lance Taylor <ian@zembu.com>
108 * opintl.h (LC_MESSAGES): Never define.
110 1999-04-04 Ian Lance Taylor <ian@zembu.com>
112 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
113 (separator_char, scale_char): Likewise.
114 (print_insn_x86): Likewise.
115 (print_insn_i386): Likewise. Add declaration.
117 1999-03-26 Doug Evans <devans@casey.cygnus.com>
119 * fr30-dis.c: Rebuild.
120 * m32r-dis.c: Rebuild.
122 1999-03-23 Ian Lance Taylor <ian@zembu.com>
124 * m68k-opc.c: Change compare instructions to use "@s" rather than
125 ";s" when used with an immediate operand.
127 1999-03-22 Doug Evans <devans@casey.cygnus.com>
129 * cgen-opc.c (cgen_set_cpu): Delete.
130 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
131 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
133 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
135 * po/opcodes.pot: Rebuild.
137 1999-03-16 Martin Hunt <hunt@cygnus.com>
139 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
141 1999-03-11 Doug Evans <devans@casey.cygnus.com>
143 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
144 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
145 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
146 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
147 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
148 * m32r-opinst.c: Rebuild.
150 1999-02-25 Doug Evans <devans@casey.cygnus.com>
152 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
153 (cgen_hw_lookup_by_num): Rewrite.
154 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
155 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
156 * m32r-opinst.c: Rebuild.
158 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
160 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
161 (insert_jhint): Fix insertion mask.
162 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
164 1999-02-10 Doug Evans <devans@casey.cygnus.com>
166 * Makefile.in: Rebuild.
168 1999-02-09 Doug Evans <devans@casey.cygnus.com>
170 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
171 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
172 * Makefile.am: Remove references to them.
173 (HFILES): Add fr30-desc.h,m32r-desc.h.
174 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
176 (ALL_MACHINES): Update.
177 * configure.in: Redo handling of cgen_files.
178 (bfd_i960_arch): Delete i960c-*.lo files.
179 * configure: Regenerate.
180 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
181 (hash_insn_array): Rewrite.
182 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
183 (hash_insn_array): Rewrite.
184 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
185 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
186 (cgen_lookup_get_insn_operands): Ditto.
187 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
188 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
189 * po/POTFILES.in: Rebuild.
190 * po/opcodes.pot: Rebuild.
192 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
194 * Makefile.am: Rebuild dependencies.
195 (HFILES): Add fr30-opc.h.
196 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
197 * Makefile.in: Rebuild.
199 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
200 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
202 * acconfig.h: Remove.
203 * configure: Rebuild with current autoconf/automake.
204 * aclocal.m4: Likewise.
205 * config.in: Likewise.
206 * Makefile.in: Likewise.
208 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
210 * m68k-opc.c: Correct move (not movew) to status word on 5200.
212 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
214 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
215 * i386-dis.c (x_mode): Define.
219 (dis386_twobyte): Remove.
220 (dis386_twobyte_att): New.
221 (dis386_twobyte_intel): New.
222 (print_insn_x86): Use new arrays.
224 (float_mem_intel): New.
225 (float_mem_att): New.
226 (dofloat): Use new float_mem arrays.
227 (print_insn_i386_att): New.
228 (print_insn_i386_intel): New.
229 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
230 (putop): Handle intel syntax.
231 (OP_indirE): Handle intel syntax.
232 (OP_E): Handle intel syntax.
233 (OP_I): Handle intel syntax.
234 (OP_sI): Handle intel syntax.
235 (OP_OFF): Handle intel syntax.
239 1999-01-27 Doug Evans <devans@casey.cygnus.com>
241 * fr30-opc.h,fr30-opc.c: Rebuild.
242 * i960c-opc.h,i960c-opc.c: Rebuild.
243 * m32r-opc.c: Rebuild.
245 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
247 * hppa-dis.c: revert HP merge changes until HP gives us
250 1999-01-19 Nick Clifton <nickc@cygnus.com>
252 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
253 offsets as well as symbloic address.
255 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
257 * hppa-dis.c: fix comments and some indentation.
259 1999-01-12 Doug Evans <devans@casey.cygnus.com>
261 * fr30-opc.c,i960c-opc.c: Regenerate.
263 1999-01-11 Doug Evans <devans@casey.cygnus.com>
265 * fr30-opc.c: Regenerate.
267 1999-01-06 Doug Evans <devans@casey.cygnus.com>
269 * m32r-dis.c: Regenerate.
271 1999-01-05 Doug Evans <devans@casey.cygnus.com>
273 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
274 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
275 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
277 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
279 * configure.in: Require autoconf 2.12.1 or higher.
281 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
283 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
285 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
287 * fr30-opc.c: Regenerated.
289 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
291 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
293 1998-12-15 Dave Brolley <brolley@cygnus.com>
295 * fr30-opc.c,fr30-opc.h: Regenerated.
297 1998-12-14 Dave Brolley <brolley@cygnus.com>
299 * fr30-opc.c,fr30-opc.h: Regenerated.
301 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
303 * fr30-opc.c,fr30-opc.h: Regenerated.
305 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
307 * m32r-opc.c: Regenerate.
309 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
311 * dis-buf.c (generic_strcat_address): reformat to GNU coding
312 conventions. change sprintf call to an sprintf_vma call.
314 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
316 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
318 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
320 The following changes were made by
321 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
322 David Taylor <taylor@texas.cygnus.com>, and
323 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
324 merge in changes by HP; HP did not create ChangeLog entries.
326 * dis-buf.c (generic_strcat_address): new function.
328 * hppa-dis.c: Changes to improve hppa disassembly.
329 Changed formatting in : reg_names, fp_reg_names,control_reg,
330 New variables : sign_extension_names, deposit_names, conversion_names
331 float_test_names, compare_cond_names_double, add_cond_names_double,
332 logical_cond_names_double, unit_cond_names_double,
333 branch_push_pop_names, saturation_names, shift_names, mix_names,
334 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
335 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
336 (fput_const): renamed as fput_hex_const
338 - use the macros fputs_filtered and
339 fput_decimal_const whenever possible; calls to sign_extend require
340 2 params -- add a missing second param of 0.
341 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
342 architecture version number of current machine. HP folks are
343 trying to handle situation where the target program was compiled
344 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
346 - added new cases : 'g', 'B', 'm'
347 - added cases specifically for PA 2.0
348 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
349 - calls to fput_const become calls to fput_hex_const
351 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
353 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
354 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
355 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
356 * Makefile.in: Rebuilt.
357 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
359 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
360 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
362 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
364 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
366 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
368 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
370 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
371 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
373 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
375 * fr30-opc.c: Regenerate.
377 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
379 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
381 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
383 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
385 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
387 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
389 1998-11-30 Doug Evans <devans@casey.cygnus.com>
391 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
392 CGEN_INSN_BASE_VALUE.
393 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
394 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
396 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
398 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
400 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
402 * fr30-asm.c,fr30-dis.c: Regenerated.
404 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
406 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
408 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
410 * fr30-opc.c: Regenerated.
412 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
414 * fr30-opc.c: Regenerated.
415 * fr30-opc.h: Regenerated.
416 * fr30-dis.c: Regenerated.
417 * fr30-asm.c: Regenerated.
419 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
421 * mips-opc.c (sync.p,sync.l): Swap insn values.
423 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
425 * fr30-opc.c: Regenerate.
427 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
429 * fr30-opc.c: Regenerated.
430 * fr30-opc.h: Regenerated.
432 1998-11-18 Doug Evans <devans@casey.cygnus.com>
434 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
435 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
437 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
439 * fr30-opc.c: Regenerated.
441 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
443 * fr30-opc.c: Regenerated.
444 * fr30-opc.h: Regenerated.
445 * fr30-dis.c: Regenerated.
446 * fr30-asm.c: Regenerated.
448 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
450 * po/opcodes.pot: Regenerated.
451 * fr30-opc.c: Regenerated.
452 * fr30-opc.h: Regenerated.
453 * fr30-dis.c: Regenerated.
454 * fr30-asm.c: Regenerated.
456 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
458 * disassemble.c (disassembler): Add support for FR30 target.
460 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
462 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
463 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
465 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
467 * po/opcodes.pot: Regenerate.
468 * po/POTFILES.in: Regenerate.
469 * fr30-opc.c: Regenerate.
470 * fr30-opc.h: Regenerate.
472 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
474 * m32r-asm.c: Regenerate.
476 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
478 * configure.in: Added case for bfd_fr30_arch.
479 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
480 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
481 (CLEANFILES): Added stamp-fr30.
483 * fr30-asm.c: New file.
484 * fr30-dis.c: New file.
485 * fr30-opc.c: New file.
486 * fr30-opc.h: New file.
487 * po/POTFILES.in: Regenerated
488 * po/opcodes.pot: Regenerated
490 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
492 * configure.in: detect cygwin* instead of cygwin32*
493 * configure: regenerate
495 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
497 * mips-opc.c (IS_M): Added.
499 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
501 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
503 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
505 * m32r-opc.h,m32r-opc.c: Regenerate.
507 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
509 * i386-dis.c (OP_3DNowSuffix): New static function.
512 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
513 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
514 (insn_codep): New static variable.
515 (print_insn_x86): Init insn_codep after prefixes.
516 (grps): Add GRP14 entries for prefetch, prefetchw.
519 From Jeff B Epler <jepler@usgs.gov>
520 * i386-dis.c (Suffix3DNow): New table.
522 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
524 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
526 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
528 * d10v-dis.c (print_operand): If num is nonzero, then
529 add OPERAND_ACC1, not OPERAND_ACC0.
531 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
533 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
536 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
538 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
541 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
543 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
545 1998-09-09 Michael Meissner <meissner@cygnus.com>
547 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
550 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
552 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
554 (print_insn_little_arm): Detect Thumb symbols in elf object
557 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
559 * alpha-dis.c (print_insn_alpha): Use the machine type to
560 decide which PALcode set to include.
562 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
564 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
566 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
568 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
569 MSUB and MSUBS instructions.
571 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
573 * ppc-opc.c (powerpc_operands): Omit parens around additions in
576 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
578 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
579 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
580 +, -, and d for ColdFire.
582 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
583 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
584 (extract_mbe): Likewise.
586 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
588 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
590 * m10300-opc.c: First cut at UDF instructions.
592 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
594 * m32r-opc.c: Regenerate (remove semantic descriptions).
596 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
598 * arm-dis.c (print_insn_big_arm): Fix indentation.
599 (print_insn_little_arm): Likewise.
601 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
603 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
605 (print_insn_little_arm): Likewise.
607 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
609 Move all global state data into opcode table struct, and treat
610 opcode table as something that is "opened/closed".
611 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
612 (cgen_asm_init): Delete.
613 (cgen_set_parse_operand_fn): New function.
614 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
615 (cgen_dis_init): Delete.
616 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
617 (cgen_current_{opcode_table_mach,endian}): Delete.
618 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
620 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
622 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
625 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
627 * m10300-opc.c: Add entries for "no_match_operands" field in
630 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
632 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
634 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
636 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
638 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
640 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
642 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
644 (OP_J): Remove unnecessary subtraction when 16-bit displacement
645 will be masked later.
647 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
649 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
651 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
653 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
655 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
657 * m10300-dis.c: Only recognize instructions from the currently
659 * m10300-opc.c: Add field indicating the particular variant of
660 the mn10300 each instruction is available on.
662 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
664 * configure.in: For bfd_vax_arch, build vax-dis.lo.
665 * Makefile.am: Rebuild dependencies.
666 (CFILES): Add vax-dis.c.
667 (ALL_MACHINES): Add vax-dis.lo.
668 * aclocal.m4: Rebuild with current libtool.
669 * configure, Makefile.in: Rebuild.
671 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
673 * vax-dis.c: New file, from work by Pauline Middelink
674 <middelin@polyware.iaf.nl>.
675 * disassemble.c (ARCH_vax): Define if ARCH_all.
676 (disassembler): Add case for ARCH_vax.
677 * makefile.vms: Support compilation on vms/vax.
679 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
681 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
682 related to sign extension and the size of ints.
684 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
686 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
687 instructions. Support (sp) addressing mode by expanding it into
690 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
692 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
694 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
696 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
698 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
700 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
703 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
705 * mips-dis.c (print_insn_little_mips): Previously, instruction
706 printing references the symbol table to determine whether the
707 instruction resides in a block regular instructions or mips16
708 instructions. However, when the disassembler gets used in other
709 environments where the symbol table is not present, we no longer
710 rely in the symbol table, rather, use the low bit of the
711 instructions address to guess. There should be no change for usage
712 of the disassembler in host based programs, gdb, objdump.
713 (print_insn_big_mips): ditto.
714 (print_insn_mips): ditto
716 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
718 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
720 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
722 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
724 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
726 * i386-dis.c (index16): Add '%' to register names. Use ','
729 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
731 * i386-dis.c: Don't print opcode suffix when we can figure out the
732 size (and gas can!) by register operands, or from the default
734 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
736 (dis386, dis386_twobyte, grps): Use new suffix macros.
737 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
738 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
739 order of cmps operands to agree with Intel docs. Correct operand
740 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
741 agree with Intel docs.
742 (print_insn_x86): Print orphan fwait before other prefixes.
743 Return correct byte count for orphan fwait with prefixes. Don't
744 print `bound' operands in reverse order.
745 (ckprefix): Stop accumulating prefixes if we get fwait.
746 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
748 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
750 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
751 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
753 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
755 Fix problems when bfd_vma is wider than long.
756 * i386-dis.c: Make op_address and start_pc unsigned.
757 (set_op): Make parameter unsigned.
758 (print_insn_x86): Cast to bfd_vma when passing a value to
760 * ns32k-dis.c (CORE_ADDR): Don't define.
761 (print_insn_ns32k): Change type of addr to bfd_vma. Use
762 bfd_scan_vma to read back address.
763 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
765 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
766 (NEXTULONG): New definition.
767 (print_insn_m68k): Avoid overflow when computing third argument of
769 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
770 Use disp instead of val to store offset values.
771 (print_indexed): Use base_disp instead of word to store base
772 displacement, to avoid overflow.
773 * m10300-dis.c (disassemble): Cast value to long when computing
774 pc-relative address, to get correct sign extension.
776 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
778 * m32r-opc.c: Regenerate.
780 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
782 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
783 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
785 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
787 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
789 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
791 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
793 (OP_DSreg): Rename from OP_DSSI.
794 (OP_ESreg): Rename from OP_ESDI.
795 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
797 (append_seg): Rename from append_prefix.
798 (ptr_reg): New function.
799 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
801 (PREFIX_ADDR): Rename from PREFIX_ADR.
802 (float_reg): Add non-broken opcodes for people who don't want
805 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
807 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
810 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
812 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
814 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
816 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
817 0; produce error message for shifts of size 32 (or 64 for 64-bit
818 shifts), because the hardware doesn't support them.
820 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
822 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
823 LONG_2, LONG_2b formats to use this new operand.
825 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
827 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
829 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
831 * sparc-dis.c (print_insn_sparc): big endian instruction / little
834 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
836 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
837 and SHORT_B3b formats to use Rb instead of Ra.
839 Add FLAG_MUL16 to MUL2XH opcode.
841 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
842 to existing 1.1.1 parallelisation prohibition procedure.
844 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
846 * m32r-asm.c,m32r-dis.c: Regenerate.
848 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
850 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
851 with a shift count of 0.
853 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
855 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
856 (cgen_hw_lookup_by_num): New function.
858 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
860 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
862 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
864 * sparc-dis.c (print_insn_sparc): Always fetch instructions
865 as big-endian on SPARClite.
867 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
869 * d30v-opc.c (pre_defined_register): Remove alias for r0.
871 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
873 * po/Make-in (install-info): New target.
875 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
877 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
878 * configure: Rebuild.
880 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
882 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
883 variety of ISA2 instructions to set bottom ten bits of trap code.
885 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
887 * Makefile.am (config.status): Add explicit target so that
888 config.status depends upon bfd/configure.in.
889 * Makefile.in: Rebuild.
891 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
893 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
894 instructions to set bottom ten bits of break code.
895 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
896 for above optional argument.
898 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
900 * makefile.vms: Run dec c with /nodebug.
902 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
904 * Makefile.in: Rebuilt.
905 * Makefile.am: Regenerated dependencies with mkdep.
907 * opintl.h (_): Define as dgettext.
909 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
911 * cgen-asm.c: Internationalised.
912 * m32r-asm.c: Internationalised.
913 * m32r-dis.c: Internationalised.
914 * m32r-opc.c: Internationalised.
916 * aclocal.m4: Regenerated.
917 * configure: Regenerated.
918 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
919 * Makefile.in: Rebuild.
920 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
921 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
923 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
925 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
927 * aclocal.m4, configure: Rebuild with current tools.
929 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
931 * opintl.h: New file - contains internationalisation macros used
932 by source files in this directory.
933 * po/: New subdirectory - contains internationalisation files.
934 * po/Make-in: New file - Makefile constructor.
935 * po/POTFILES.in: New file - list of files in opcodes directory
936 that should be scan for internationalisation macros.
937 * po/opcodes.pot: New file - list of internationisation strings
938 found in files mentioned in po/POTFILES.in.
939 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
940 entry. Add intl directory to include paths.
941 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
942 HAVE_STRCPY, HAVE_LC_MESSAGES
943 * configure.in: Add rule to build Makefile in po subdirectory.
944 * Makefile.in: Rebuilt.
945 * aclocal.m4: Rebuilt.
946 * config.in: Rebuilt.
947 * configure: Rebuilt.
948 * alpha-opc.c: Internationalised.
949 * arc-dis.c: Internationalised.
950 * arc-opc.c: Internationalised.
951 * arm-dis.c: Internationalised.
952 * cgen-asm.c: Internationalised.
953 * d30v-dis.c: Internationalised.
954 * dis-buf.c: Internationalised.
955 * h8300-dis.c: Internationalised.
956 * h8500-dis.c: Internationalised.
957 * i386-dis.c: Internationalised.
958 * m10200-dis.c: Internationalised.
959 * m10300-dis.c: Internationalised.
960 * m68k-dis.c: Internationalised.
961 * m88k-dis.c: Internationalised.
962 * mips-dis.c: Internationalised.
963 * ns32k-dis.c: Internationalised.
964 * opintl.h: Internationalised.
965 * ppc-opc.c: Internationalised.
966 * sparc-dis.c: Internationalised.
967 * v850-dis.c: Internationalised.
968 * v850-opc.c: Internationalised.
970 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
972 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
973 (asm_hash_table_entries): New variable.
974 (cgen_asm_init): Free asm_hash_table_entries.
975 (hash_insn_array,hash_insn_list): New functions.
976 (build_asm_hash_table): Use them. Hash macro insns as well.
977 (cgen_asm_lookup_insn): Update.
978 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
979 (dis_hash_table_entries): New variable.
980 (cgen_dis_init): Free dis_hash_table_entries.
981 (hash_insn_array,hash_insn_list): New functions.
982 (build_dis_hash_table): Use them. Hash macro insns as well.
983 (cgen_dis_lookup_insn): Update.
984 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
985 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
986 (cgen_macro_insn_count): New function.
987 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
989 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
991 * i386-dis.c (OP_DSSI): Print segment override.
993 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
995 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
998 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1000 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1001 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1002 * configure.in: Define and substitute WIN32LDFLAGS and
1004 * aclocal.m4: Rebuild with new libtool.
1005 * configure, Makefile.in: Rebuild.
1007 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1009 * m32r-opc.c: Regenerate.
1011 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1013 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1014 before trying to copy it.
1015 * Makefile.in: Rebuild.
1017 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1019 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1021 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1023 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1024 from an arbitrary valid buffer instead of fetching them on demand
1026 (invalid_float): use bit_extract_simple() instead of bit_extract().
1028 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1030 From H.J. Lu <hjl@gnu.org>:
1031 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1034 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1036 * Branched binutils 2.9.
1038 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1040 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1041 disassembling last 4 bytes of a section.
1043 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1045 Fix some gcc -Wall warnings:
1046 * arc-dis.c (print_insn): Add casts to avoid warnings.
1047 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1048 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1049 * m10200-dis.c (disassemble): Likewise.
1050 * m10300-dis.c (disassemble): Likewise.
1051 * ns32k-dis.c (print_insn_ns32k): Likewise.
1052 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1053 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1054 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1055 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1056 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1057 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1058 * tic80-dis.c (print_one_instruction): Likewise.
1059 * w65-dis.c (print_operand): Likewise.
1060 * z8k-dis.c (fetch_data): Likewise.
1061 * a29k-dis.c: Add return type for find_byte_func_type.
1062 * arc-opc.c: Include <stdio.h>. Remove declarations of
1063 insert_multshift and extract_multshift.
1064 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1066 (extract_value): Fully parenthesize expression.
1067 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1068 * h8500-opc.h (h8500_table): Fully bracket initializer.
1069 * w65-opc.h (optable): Likewise.
1070 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1071 * i386-dis.c (OP_E): Initialize local variables.
1072 * m10200-dis.c (print_insn_mn10200): Likewise.
1073 * mips-dis.c (print_insn_mips16): Likewise.
1074 * sh-dis.c (print_insn_shx): Likewise.
1075 * v850-dis.c (print_insn_v850): Likewise.
1076 * ns32k-dis.c (print_insn_arg): Declare.
1077 (get_displacement, invalid_float): Declare.
1078 (list_search, sign_extend, flip_bytes): Declare return type.
1079 (get_displacement): Likewise.
1080 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1082 (print_insn_ns32k): Make i unsigned.
1083 (invalid_float): Make static. Declare type of val.
1084 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1085 on each for iteration.
1086 * tic30-dis.c (get_indirect_operand): Likewise.
1087 * z8k-dis.c (print_insn_z8001): Declare return type.
1088 (print_insn_z8002): Likewise.
1089 (unparse_instr): Fix sprintf format strings.
1091 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1093 * mips-opc.c: Add "sync.l" and "sync.p".
1095 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1097 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1098 default m68k variant to recognize.
1100 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1101 (ctrl, cobr, mem, ea): Likewise.
1102 (print_addr): Likewise. Remove cast.
1103 (ea): Cast argument of print_addr to bfd_vma.
1105 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1107 (cgen_parse_unsigned_integer): Likewise.
1108 (cgen_parse_address): Likewise.
1110 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1112 * i960-dis.c (ctrl): Add full braces to structure initialization.
1113 (cobr, mem, reg): Likewise.
1114 (ea): Correct parenthesization in expression.
1116 * cgen-asm.c: Include <ctype.h>.
1117 (build_asm_hash_table): Remove unused local variable i.
1118 (cgen_parse_keyword): Add casts to avoid warnings.
1120 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1121 symbol. Fix indentation.
1122 (print_insn_little_arm): Likewise.
1124 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1126 * configure.in: Use AM_DISABLE_SHARED.
1127 * aclocal.m4, configure: Rebuild with libtool 1.2.
1129 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1131 These patches are courtesy of Jonathan Walton and Tony Thompson
1132 (athompso@cambridge.arm.com).
1134 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1137 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1138 both the offset and the label closest to the destination.
1140 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1142 * m32r-opc.h: Regenerate.
1144 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1146 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1148 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1150 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1151 assume that info->symbols is non-empty.
1153 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1155 * alpha-opc.c (cvtqs) There is no such thing.
1156 (cvttq): Missing most of the /*d variants.
1158 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1160 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1161 delayed branches or jumps.
1163 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1165 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1167 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1168 * tic30-dis.c (print_branch): Likewise.
1170 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1172 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1173 saved_symbol code as it is no longer needed.
1175 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1177 * cgen-asm.c: Include symcat.h.
1178 * cgen-dis.c,cgen-opc.c: Ditto.
1179 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1181 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1183 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1185 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1187 * m32r-opc.[ch]: Regenerate.
1189 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1191 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1192 arguments. Don't perform validation here.
1193 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1195 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1197 * m32r-opc.c: Regenerate.
1199 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1201 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1202 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1204 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1206 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1208 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1210 * configure.in: Get the version number from BFD.
1211 * configure: Rebuild.
1213 From H.J. Lu <hjl@gnu.org>:
1214 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1215 * Makefile.in: Rebuild.
1217 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1219 * m32r-opc.c: Regenerate.
1220 * m32r-opc.h: Regenerate.
1222 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1224 * m32r-opc.c: Regenerate.
1226 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1228 Fix rac to accept only a0:
1229 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1230 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1231 Introduce OPERAND_GPR.
1232 * d10v-dis.c (print_operand): Likewise.
1234 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1236 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1237 (cgen_hw_lookup): Make result const.
1238 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1240 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1242 * configure, aclocal.m4: Rebuild with new libtool.
1244 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1246 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1247 instructions use a PC relative branch, not absolute.
1249 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1251 * configure.in: Set libtool_enable_shared rather than
1252 libtool_shared. Remove diversion hack.
1253 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1255 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1257 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1258 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1260 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1262 * tic30-dis.c: New file.
1263 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1264 * configure.in: Handle bfd_tic30_arch.
1265 * Makefile.am: Rebuild dependencies.
1266 (CFILES): Add tic30-dis.c
1267 (ALL_MACHINES): Add tic30-dis.lo.
1268 * configure, Makefile.in: Rebuild.
1270 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1272 * m32r-opc.h (HAVE_CPU_M32R): Define.
1274 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1276 * v850-opc.c (insertion routines): If both alignment and size is
1277 wrong then report this.
1279 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1281 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1282 Only recognize instructions for the current target_processor.
1284 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1286 * d10v-dis.c (PC_MASK): Correct value.
1287 (print_operand): If there's a reloc, don't calculate the
1288 address because they could be in different sections.
1290 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1292 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1293 instruction after the 4650's "mul" instruction; nobody's using the
1294 4010 these days. If object files someday indicate which processor
1295 variant they're intended for, we can do a better job at this.
1297 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1299 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1300 table provided entry size. Use CGEN_INSN_MNEMONIC.
1301 (cgen_parse_keyword): Rewrite.
1302 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1303 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1304 * cgen-opc.c: Clean up pass over `struct foo' usage.
1305 (cgen_keyword_lookup_value): Handle "" entry.
1306 (cgen_keyword_add): Likewise.
1308 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1310 * mips-opc.c: Add FP_D to s.d instruction flags.
1312 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1314 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1316 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1318 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1319 PC relative offset forms before the 15 bit forms. An assembler command
1320 line option now chooses the default.
1322 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1324 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1325 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1327 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1329 * configure: Only build libopcodes shared if --enable-shared's value
1330 was `yes', or was set to `*opcodes*'.
1331 * aclocal.m4: Likewise.
1332 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1333 original source of this bit of code. It's not clear what the best fix
1336 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1338 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1339 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1340 offset forms before the 15 bit forms, to default to the long forms.
1342 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1344 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1346 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1348 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1349 symbol if none is present.
1350 (print_insn_big_arm): Prevent examination of stored symbol if
1353 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1355 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1357 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1359 * disassemble.c: Remove disasm_symaddr() function.
1361 * arm-dis.c: Use info->symbol instead of info->flags to determine
1362 if disassmbly should be in Thumb or Arm mode.
1364 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1366 * arm-dis.c: Add support for disassembling Thumb opcodes.
1367 (print_insn_thumb): New function.
1369 * disassemble.c (disasm_symaddr): New function.
1371 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1372 (thumb_opcodes): Table of Thumb opcodes.
1374 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1376 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1378 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1379 and 'v' as operand types.
1381 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1383 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1384 <olivier.carmona@di.epfl.ch>.
1385 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1386 which has a two word opcode with a one word argument.
1388 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1390 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1391 unsigned, not signed.
1392 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1394 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1396 * d10v-dis.c (print_operand):
1397 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1399 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1401 * d10v-opc.c (OPERAND_FLAG): Split into:
1402 (OPERAND_FFLAG, OPERAND_CFLAG) .
1406 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1408 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1409 field for all INSN_MACRO's.
1410 * mips16-opc.c: same
1412 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1414 * mips-opc.c (sync,cache): These are 3900 insns.
1416 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1418 sh-opc.h (sh_table): Remove ftst/nan.
1420 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1422 * mips-opc.c (ffc, ffs): Fix mask.
1424 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1426 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1429 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1431 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1432 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1434 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1436 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1437 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1439 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1441 * v850-dis.c (disassemble): Replace // with /* ... */
1443 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1445 * sparc-opc.c: Add wr & rd for v9a asr's.
1446 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1447 (v9a_asr_reg_names): New variable.
1448 Patch from David Miller <davem@vger.rutgers.edu>.
1450 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1452 * sparc-opc.c (v9notv9a): New insn type.
1453 (IMPDEP): Move to the end to not conflict with edge8 et al.
1454 Patch from David Miller <davem@vger.rutgers.edu>.
1456 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1458 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1460 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1462 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1464 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1466 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1467 of disassemble_info structure to determine if an overlay address
1468 has a matching symbol in low memory.
1470 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1471 new symbol_at_address_func field in disassemble_info structure.
1473 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1475 * v850-opc.c (extract_d22): Use signed arithmatic.
1477 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1479 * mips-opc.c: Three op mult is not an ISA insn.
1481 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1483 * mips-opc.c: Fix formatting.
1485 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1487 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1488 than assuming that char is signed. Explicitly sign extend 16 bit
1489 values, rather than assuming that short is 16 bits.
1490 (OP_sI, OP_J, OP_DIR): Likewise.
1492 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1494 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1497 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1499 * v850-opc.c: Fix typo in comment.
1501 * v850-dis.c (disassemble): Add test of processor type when
1502 determining opcodes.
1504 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1506 * configure.in: Use a diversion to set enable_shared before the
1507 arguments are parsed.
1508 * configure: Rebuild.
1510 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1512 * m68k-opc.c (TBL1): Use ! rather than `.
1513 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1515 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1517 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1519 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1521 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1524 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1525 * aclocal.m4: Rebuild with new libtool.
1526 * configure: Rebuild.
1528 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1530 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1532 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1534 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1536 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1538 * v850-opc.c (v850_opcodes): Further rearrangements.
1540 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1542 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1544 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1546 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1549 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1551 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1553 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1555 * v850-opc.c: Initialise processors field of v850_opcode structure.
1557 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1559 Merge changes from Martin Hunt:
1561 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1563 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1564 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1565 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1567 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1569 * d30v-dis.c (print_insn): First operand of d*i (delayed
1570 branch) instructions is relative.
1572 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1573 (d30v_operand_table): Add IMM6S3 type.
1574 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1576 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1577 and cmp instructions.
1579 * d30v-opc.c: Correct entries for repeat*, and sat*.
1580 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1581 types. Correct several formats.
1583 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1585 * d30v-opc.c (pre_defined_registers): Change control registers.
1587 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1588 SHORT_C2. Manual was incorrect.
1590 * d30v-dis.c (lookup_opcode): Return value now indicates
1591 if an opcode has a short and a long form. Used for deciding
1592 to append a ".s" or ".l".
1593 (print_insn): Append a ".s" to an instruction if it is
1594 the short form and ".l" if it is a long form. Do not append
1595 anything if the instruction has only one possible size.
1597 * d30v-opc.c: Change mulx2h to require an even register.
1598 New form: SHORT_A2; a SHORT_A form that needs an even
1599 register as the first operand.
1601 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1602 instruction was not being disassembled if there were an odd
1603 number of instructions.
1605 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1607 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1609 * v850-dis.c (disassemble): Improved display of register lists.
1611 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1613 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1614 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1615 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1616 fandnot1s, fandnot2s.
1618 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1620 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1622 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1624 * cgen-asm.c (cgen_parse_address): New argument resultp.
1625 All callers updated.
1626 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1628 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1630 * mn10200-dis.c (disassemble): PC relative instructions are
1631 relative to the next instruction, not the current instruction.
1633 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1635 * v850-dis.c (disassemble): Only signed extend values that are not
1636 returned by extract functions.
1637 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1639 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1641 * v850-opc.c: Update comments. Remove use of
1642 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1644 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1646 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1648 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1650 * configure: Rebuilt with latest devo autoconf for NT support.
1652 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1654 * v850-dis.c (disassemble): Use curly brace syntax for register
1657 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1658 where r0 is being used as a destination register.
1660 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1662 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1664 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1666 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1668 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1670 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1671 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1674 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1676 * configure (cgen_files): Add support for v850e target.
1677 * configure.in (cgen_files): Add support for v850e target.
1679 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1681 * configure (cgen_files): Add support for v850ea target.
1682 * configure.in (cgen_files): Add support for v850ea target.
1684 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1686 * configure.in (bfd_arc_arch): Add.
1687 * configure: Rebuild.
1688 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1689 * Makefile.in: Rebuild.
1690 * arc-dis.c, arc-opc.c: New files.
1691 * disassemble.c (ARCH_all): Define ARCH_arc.
1692 (disassembler): Add ARC support.
1694 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1696 * v850-dis.c (disassemble): Add support for v850EA instructions.
1698 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1699 (v850_opcodes): Add v850EA instructions.
1701 * v850-dis.c (disassemble): Add support for v850E instructions.
1703 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1704 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1705 insert_spe, extract_spe): New Functions.
1706 (v850_opcodes): Add v850E instructions.
1708 * v850-opc.c: Reorganised and re-layed out to improve readability
1711 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1713 * configure: Rebuild with autoconf 2.12.1.
1715 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1717 * aclocal.m4, configure: Rebuild with new automake patches.
1719 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1721 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1722 * acinclude.m4: Just include acinclude.m4 from BFD.
1723 * aclocal.m4, configure: Rebuild.
1725 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1727 * Makefile.am: New file, based on old Makefile.in.
1728 * acconfig.h: New file.
1729 * acinclude.m4: New file.
1730 * stamp-h.in: New file.
1731 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1732 Removed shared library handling; now handled by libtool. Replace
1733 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1734 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1735 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1736 handling in AC_OUTPUT.
1737 * dep-in.sed: Change .o to .lo.
1738 * Makefile.in: Now built with automake.
1739 * aclocal.m4: Now built with aclocal.
1740 * config.in, configure: Rebuild.
1742 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1744 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1746 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1748 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1750 * sparc-dis.c (sorted_opcodes): New static local.
1751 (struct opcode_hash): `opcode' is pointer to const element.
1752 (build_hash): First arg is now table of sorted pointers.
1753 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1754 (compare_opcodes): Update.
1756 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1758 * cgen-opc.c: #include <ctype.h>.
1759 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1760 Handle case insensitive hashing.
1761 (hash_keyword_value): Change type of `value' to unsigned int.
1763 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1765 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1766 precision FP, mark it as such. Likewise for double precision
1767 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1770 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1772 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1774 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1775 nesting depth when all the macros are expanded.
1777 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1779 * sparc-opc.c: The fcmp v9a instructions take an integer register
1780 as a destination, not a floating point register. From Christian
1781 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1783 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1785 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1786 syntax. From Roman Hodek
1787 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1789 * i386-dis.c (twobyte_has_modrm): Fix pand.
1791 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1793 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1795 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1797 * arm-dis.c: Add prototypes for arm_decode_shift and
1800 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1802 * mips-opc.c: Add r3900 insns.
1804 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1806 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1807 print delay slot instructions on the same line. When using a PC
1808 relative load, add a comment with the value being loaded if it can
1811 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1813 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1814 to pushS/popS for segment regs and byte constant so that
1815 pushw/popw printed when in 16 bit data mode.
1817 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1818 print cbtw, cwtd in 16 bit data mode.
1819 * i386-dis.c (putop): extra case W to support above.
1821 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1822 address size prefix in 16 bit address mode.
1824 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1826 * sh-dis.c: Reindent. Rename local variable fprintf to
1829 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1831 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1833 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1835 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1837 * mips16-opc.c (mip16_opcodes): same.
1839 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1841 * m68k-opc.c (moveb): Change $d to %d.
1843 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1845 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1846 (twobyte_has_modrm): Likewise.
1848 (OP_MMX, OP_EM, OP_MS): New static functions.
1850 * i386-dis.c: Revert patch of April 4. The output now matches
1853 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1855 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1858 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1862 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1864 * Makefile.in (install): Depend upon installdirs.
1865 (installdirs): New target.
1867 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1869 From Thomas Graichen <graichen@rzpd.de>:
1870 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1871 * configure: Rebuild.
1873 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1875 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1876 Delete string{,s}.h support.
1878 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1880 * cgen-asm.c (cgen_parse_operand_fn): New global.
1881 (cgen_parse_{{,un}signed_integer,address}): Update call to
1882 cgen_parse_operand_fn.
1883 (cgen_init_parse_operand): New function.
1884 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1885 from cgen_asm_init_parse.
1886 (m32r_cgen_assemble_insn): New operand `errmsg'.
1887 Delete call to as_bad, return error message to caller.
1888 (m32r_cgen_asm_hash_keywords): #if 0 out.
1890 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1892 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1894 [case 'J']: Fix typo in register name.
1896 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1898 * configure.in: Substitute SHLIB_LIBS.
1899 * configure: Rebuild.
1900 * Makefile.in (SHLIB_LIBS): New variable.
1901 ($(SHLIB)): Use $(SHLIB_LIBS).
1903 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1905 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1907 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1909 * disassemble.c (disassembler): Handle m32r.
1911 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1913 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1914 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1915 * Makefile.in (CFILES): Add them.
1916 (ALL_MACHINES): Add them.
1917 (dependencies): Regenerate.
1918 * configure.in (cgen_files): New variable.
1919 (bfd_m32r_arch): Add entry.
1920 * configure: Regenerate.
1922 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1924 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1925 * configure: Rebuild.
1927 * Makefile.in: Rebuild dependencies.
1929 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1931 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1934 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1936 * Branched binutils 2.8.
1938 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1940 * m10200-dis.c: Rename from mn10200-dis.c.
1941 * m10200-opc.c: Rename from mn10200-opc.c.
1942 * m10300-dis.c: Rename from mn10300-dis.c
1943 * m10300-opc.c: Rename from mn10300-opc.c.
1944 * Makefile.in: Update accordingly.
1946 * mips16-opc.c: Add mul and dmul macros.
1948 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1950 * makefile.vms: Update CFLAGS, add clean target.
1952 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1954 * mips-opc.c: Add "wait". From Ralf Baechle
1955 <ralf@gnu.ai.mit.edu>.
1957 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1958 * configure, config.in: Rebuild.
1959 * sysdep.h: Include <stdlib.h> if it exists.
1960 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1962 * Makefile.in: Rebuild dependencies.
1964 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1966 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1967 Andrew Bray <andy@madhouse.demon.co.uk>.
1969 * mips-opc.c: Add cast when setting mips_opcodes.
1971 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1973 * v850-dis.c (disassemble): Fix sign extension problem.
1974 * v850-opc.c (extract_d*): Fix sign extension problems to make
1975 disassembly calculate branch offsets correctly.
1977 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1979 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1981 * mips-opc.c: Add dctr and dctw.
1983 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1985 * d30v-dis.c (print_insn): Change the way signed constants
1988 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1990 * Makefile.in (BFD_H): New variable.
1991 (HFILES): New variable.
1992 (CFILES): Add all C files.
1993 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1994 Delete old dependencies, and build new ones.
1995 * dep-in.sed: New file.
1997 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1999 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2001 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2003 * mn10200-opc.c: Change "trap" to "syscall".
2004 * mn10300-opc.c: Add new "syscall" instruction.
2006 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2008 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2009 mulul insns on the coldfire.
2011 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2013 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2014 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2015 (print_insn_little_arm): Likewise.
2017 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2019 Based on patches from H.J. Lu <hjl@lucon.org>:
2020 * i386-dis.c (fetch_data): Add prototype.
2021 * m68k-dis.c (fetch_data): Add prototype.
2022 (dummy_print_address): Add prototype. Make static.
2023 * ppc-opc.c (valid_bo): Add prototype.
2024 * sparc-dis.c (build_hash_table): Add prototype.
2025 (is_delayed_branch, compute_arch_mask): Add prototypes.
2026 (print_insn_sparc): Make several local variables const.
2027 (compare_opcodes): Change arguments to const PTR. Add prototype.
2028 * sparc-opc.c (arg): Change name field to be const.
2029 (lookup_name, lookup_value): Add prototypes. Change table and
2030 name parameters to be const.
2031 (sparc_encode_asi): Change name parameter to be const.
2032 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2033 (sparc_encode_sparclet_cpreg): Likewise.
2034 (sparc_decode_asi): Change return type to be const.
2035 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2036 (sparc_decode_sparclet_cpreg): Likewise.
2038 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2040 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2041 Solaris doesn't like the combined options, and the -f is
2043 (stamp-tshlink, install): Likewise.
2045 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2047 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2050 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2052 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2054 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2056 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2059 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2061 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2063 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2065 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2067 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2069 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2071 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2073 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2074 floatformat_to_double to make portable.
2075 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2078 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2080 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2081 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2083 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2085 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2086 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2088 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2090 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2091 (OFF_SL_BR_SCALED): ... to this, and added the flag
2092 TIC80_OPERAND_BASEREL to the flags word.
2093 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2096 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2098 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2099 Change mips_opcodes from const array to a pointer,
2100 and change bfd_mips_num_opcodes from const int to int,
2101 so that we can increase the size of the mips opcodes table
2104 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2106 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2107 store BITNUM values in the table in one's complement form
2108 to match behavior when assembler is given a raw numeric
2109 value for a BITNUM operand.
2110 * tic80-dis.c (print_operand_bitnum): Ditto.
2112 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2114 * d30v-opc.c: Removed references to FLAG_X.
2116 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2118 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2120 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2122 * Makefile.in: Added d30v object files.
2123 * configure: (bfd_d30v_arch) Rebuilt.
2124 * configure.in: (bfd_d30v_arch) Added new case.
2125 * d30v-dis.c: New file.
2126 * d30v-opc.c: New file.
2127 * disassemble.c (disassembler) Add entry for d30v.
2129 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2131 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2132 representations for the floating point BITNUM values.
2134 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2136 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2137 in the table in one's complement form, as they appear in the
2139 (tic80_symbol_to_value): Use macros to access predefined
2141 (tic80_value_to_symbol): Ditto.
2142 (tic80_next_predefined_symbol): New function.
2143 * tic80-dis.c (print_operand_bitnum): Remove code that did
2144 one's complement for BITNUM values.
2146 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2148 * makefile.vms: Remove 8 bit characters. Update to latest
2151 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2153 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2155 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2157 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2158 (IMM24_PCREL): Likewise.
2160 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2162 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2163 address for an extended PC relative instruction that is not a
2166 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2168 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2171 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2173 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2174 (tic80_opcodes): Sort entries so that long immediate forms
2175 come after short immediate forms, making it easier for
2176 assembler to select the right one for a given operand.
2178 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2180 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2182 (print_insn_mips16): Likewise.
2184 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2186 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2187 a symbol class that restricts translation to just that
2188 class (general register, condition code, etc).
2190 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2192 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2193 and REG_DEST_E for register operands that have to be
2194 an even numbered register. Add REG_FPA for operands that
2195 are one of the floating point accumulator registers.
2196 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2197 (tic80_opcodes): Change entries that need even numbered
2198 register operands to use the new operand table entries.
2199 Add "or" entries that are identical to "or.tt" entries.
2201 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2203 * mips16-opc.c: Add new cases of exit instruction for
2205 * mips-dis.c (print_mips16_insn_arg): Display floating point
2206 registers in operands of exit instruction. Print `$' before
2207 register names in operands of entry and exit instructions.
2209 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2211 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2212 pairs for all predefined symbols recognized by the assembler.
2213 Also used by the disassembling routines.
2214 (tic80_symbol_to_value): New function.
2215 (tic80_value_to_symbol): New function.
2216 * tic80-dis.c (print_operand_control_register,
2217 print_operand_condition_code, print_operand_bitnum):
2218 Remove private tables and use tic80_value_to_symbol function.
2220 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2222 * d10v-dis.c (print_operand): Change address printing
2223 to correctly handle PC wrapping. Fixes PR11490.
2225 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2227 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2230 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2232 * mips-dis.c (print_insn_mips16): Set insn_info information.
2233 (print_mips16_insn_arg): Likewise.
2235 * mips-dis.c (print_insn_mips16): Better handling of an extend
2236 opcode followed by an instruction which can not be extended.
2238 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2240 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2241 coldfire moveb instruction to not allow an address register as
2242 destination. Although the documentation does not indicate that
2243 this is invalid, experiments uncovered unexpected behavior.
2244 Added a comment explaining the situation. Thanks to Andreas
2245 Schwab for pointing this out to me.
2247 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2249 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2250 entries are presorted so that entries with the same mnemonic are
2251 adjacent to each other in the table. Sort the entries for each
2252 instruction so that this is true.
2254 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2256 * m68k-dis.c: Include <libiberty.h>.
2257 (print_insn_m68k): Sort the opcode table on the most significant
2258 nibble of the opcode.
2260 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2262 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2263 "vsub", "vst", "xnor", and "xor" instructions.
2264 (V_a1): Renamed from V_a, msb of accumulator reg number.
2265 (V_a0): Add macro, lsb of accumulator reg number.
2267 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2269 * tic80-dis.c (print_insn_tic80): Broke excessively long
2270 function up into several smaller ones and arranged for
2271 the instruction printing function to be callable recursively
2272 to print vector instructions that have both a load and a
2273 math instruction packed into a single opcode.
2274 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2275 to explain why it comes after the other vector opcodes.
2277 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2279 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2280 move insns to handle immediate operands.
2282 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2284 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2285 fix operand mask in the "moveml" entries for the coldfire.
2287 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2289 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2290 New macros for building vector instruction opcodes.
2291 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2292 FMT_LI, which were unused. The field is now a flags field.
2293 Remove some opcodes that are possible, but illegal, such
2294 as long immediate instructions with doubles for immediate
2295 values. Add "vadd" and "vld" instructions.
2297 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2299 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2300 the order more logical. Move the shift alias instructions ("rotl",
2301 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2302 interspersed with the regular sr.x and sl.x instructions. Add
2303 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2304 "sub", "subu", "swcr", and "trap".
2306 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2308 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2309 (OFF_SL_PC): Renamed from OFF_SL.
2310 (OFF_SS_BR): New operand type for base relative operand.
2311 (OFF_SL_BR): New operand type for base relative operand.
2312 (REG_BASE): New operand type for base register operand.
2313 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2314 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2315 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2317 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2318 10 char field, padded with spaces on rhs, rather than a string
2319 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2320 than old TIC80_OPERAND_RELATIVE. Add support for new
2321 TIC80_OPERAND_BASEREL flag bit.
2323 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2325 * tic80-dis.c (print_insn_tic80): Print floating point operands
2327 * tic80-opc.c (SPFI): Add single precision floating point
2328 immediate operand type.
2329 (ROTATE): Add rotate operand type for shifts.
2330 (ENDMASK): Add for shifts.
2331 (n): Macro for the 'n' bit.
2332 (i): Macro for the 'i' bit.
2333 (PD): Macro for the 'PD' field.
2334 (P2): Macro for the 'P2' field.
2335 (P1): Macro for the 'P1' field.
2336 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2339 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2341 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2342 adding in current address for pc-relative operands.
2344 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2346 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2347 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2348 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2349 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2350 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2351 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2352 (REG_SCALED, LSI_SCALED): New operand types.
2353 (E): New macro for 'E' bit at bit 27.
2354 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2355 opcodes, including the various size flavors (b,h,w,d) for
2356 the direct load and store instructions.
2358 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2360 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2362 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2363 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2364 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2365 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2366 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2367 masks with "MASK_* & ~M_*" to get the M bit reset.
2368 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2370 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2372 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2373 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2374 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2376 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2377 CC, SICR, and LICR table entries.
2378 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2379 "bcnd", and "brcr" opcodes.
2381 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2383 * ppc-opc.c (powerpc_operands): Make comment match the
2384 actual fields (no shift field).
2385 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2386 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2387 partial implementation, work in progress.
2388 * tic80-opc.c (tic80_operands): Begin construction operands table.
2389 (tic80_opcodes): Continue populating opcodes table and start
2390 filling in the operand indices.
2391 (tic80_num_opcodes): Add this.
2393 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2395 * m68k-opc.c: Add #B case for moveq.
2397 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2399 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2400 before they are used.
2402 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2404 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2405 for "breakpoint" instruction.
2407 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2409 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2410 (dep): Use ALL_CFLAGS rather than CFLAGS.
2412 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2414 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2417 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2419 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2420 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2422 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2424 * mips16-opc.c: Add "abs".
2426 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2428 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2429 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2430 (disassembler): Add bfd_arch_tic80 support to set disassemble
2431 to print_insn_tic80.
2432 * tic80-dis.c (print_insn_tic80): Add stub.
2434 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2436 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2437 * configure: Regenerate with autoconf.
2438 * tic80-dis.c: Add file.
2439 * tic80-opc.c: Add file.
2441 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2443 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2445 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2447 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2448 (mn10200_opcodes): Use it for some logicals and btst insns.
2449 Add "break" and "trap" instructions.
2451 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2453 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2455 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2457 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2458 relative load or add now depends upon whether the instruction is
2461 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2463 * mn10200-dis.c: Finish writing disassembler.
2464 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2465 Fix mask for "jmp (an)".
2467 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2468 handle endianness issues for mn10300.
2470 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2472 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2474 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2475 instruction. Fix opcode field for "movb (imm24),dn".
2477 * mn10200-opc.c (mn10200_operands): Fix insertion position
2480 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2482 * mn10200-opc.c: Create mn10200 opcode table.
2483 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2484 but moving along nicely.
2486 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2488 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2490 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2492 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2493 specifiers for fmovem* instructions.
2495 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2497 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2499 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2501 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2504 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2506 * mn10300-opc.c: Add some comments explaining the various
2509 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2511 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2513 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2516 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2517 operand specifiers in fmovm* instructions.
2519 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2521 * ppc-opc.c (insert_li): Give an error if the offset has the two
2522 least significant bits set.
2524 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2526 * mips-dis.c (print_insn_mips16): Separate the instruction from
2527 the arguments with a tab, not a space.
2529 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2531 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2534 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2537 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2539 * configure: Rebuild with autoconf 2.12.
2541 Add support for mips16 (16 bit MIPS implementation):
2542 * mips16-opc.c: New file.
2543 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2544 (mips16_reg_names): New static array.
2545 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2546 after seeing a 16 bit symbol.
2547 (print_insn_little_mips): Likewise.
2548 (print_insn_mips16): New static function.
2549 (print_mips16_insn_arg): New static function.
2550 * mips-opc.c: Add jalx instruction.
2551 * Makefile.in (mips16-opc.o): New target.
2552 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2553 * configure: Rebuild.
2555 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2557 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2558 operand specifiers in *save, *restore and movem* instructions.
2560 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2563 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2564 register operands for immediate arithmetic, not, neg, negx, and
2565 set according to condition instructions.
2567 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2568 specifier of the effective-address operand in immediate forms of
2569 arithmetic instructions. The specifier for the immediate operand
2570 notes how and where the constant will be stored.
2572 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2574 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2577 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2580 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2582 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2584 * mn10300-dis.c (disassemble): Handle register lists.
2586 * mn10300-opc.c: Fix handling of register list operand for
2587 "call", "ret", and "rets" instructions.
2589 * mn10300-dis.c (disassemble): Print PC-relative and memory
2590 addresses symbolically if possible.
2591 * mn10300-opc.c: Distinguish between absolute memory addresses,
2592 pc-relative offsets & random immediates.
2594 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2596 (disassemble): Handle SPLIT and EXTENDED operands.
2598 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2600 * mn10300-dis.c: Rough cut at printing some operands.
2602 * mn10300-dis.c: Start working on disassembler support.
2603 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2605 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2607 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2609 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2611 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2613 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2615 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2616 register argument is calls and jmp instructions.
2618 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2620 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2621 getx operand. Fix opcode for mulqu imm,dn.
2623 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2625 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2626 in MN10300_OPERAND_SPLIT operands for how many bits
2627 appear in the basic insn word. Add IMM32_HIGH24,
2628 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2629 (mn10300_opcodes): Use new operands as needed.
2631 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2632 for bset, bclr, btst instructions.
2633 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2635 * mn10300-opc.c (mn10300_operands): Remove many redundant
2636 operands. Update opcode table as appropriate.
2637 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2638 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2640 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2642 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2643 operands (for indexed load/stores). Fix bitpos for DI
2644 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2645 few instructions that insert immediates/displacements in the
2646 middle of the instruction. Add IMM8E for 8 bit immediate in
2647 the extended part of an instruction.
2648 (mn10300_operands): Use new opcodes as appropriate.
2650 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2652 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2653 sequential so the assembler never parallelizes it with
2656 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2658 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2659 a data/address register that appears in register field 0
2660 and register field 1.
2661 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2663 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2665 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2666 standard disassembly.
2668 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2669 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2670 Recategorize PALcode instructions.
2672 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2674 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2676 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2678 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2679 there are no operand types.
2681 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2683 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2685 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2687 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2689 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2691 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2693 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2694 and sst.w instructions.
2696 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2699 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2701 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2704 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2706 * ppc-opc.c (PPCPWR2): Define.
2707 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2710 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2712 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2713 field for movhu instruction.
2715 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2716 cast value to "long" not "signed long" to keep hpux10
2719 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2721 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2724 * mn10300-opc.c (FMT*): Remove definitions.
2726 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2727 for shift-by-register opcodes.
2729 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2730 into [AD][MN][01] for encoding the position of the register
2733 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2735 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2736 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2738 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2740 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2741 Fix various typos. Add "PAREN" operand.
2742 (MEM, MEM2): Define.
2743 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2744 operands. Fix several typos.
2746 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2749 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2752 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2754 (mn10300_opcodes): Break opcode format out into its own field.
2755 Update many operand fields to deal with signed vs unsigned
2756 issues. Fix one or two typos in the "mov" instruction
2757 opcode, mask and/or operand fields.
2759 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2761 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2762 m68851 wasn't reset.
2764 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2766 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2767 all opcodes. Very rough cut at operands for all opcodes.
2769 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2772 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2774 * mn10200-opc.c, mn10300-opc.c: New files.
2775 * mn10200-dis.c, mn10300-dis.c: New files.
2776 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2777 * disassemble.c: Break mn10x00 support into 10200 and 10300
2779 * configure.in: Likewise.
2780 * configure: Rebuilt.
2782 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2784 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2786 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2788 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2790 * disassemble (ARCH_mn10x00): Define.
2791 (disassembler): Handle bfd_arch_mn10x00.
2792 * configure.in: Recognize bfd_mn10x00_arch.
2793 * configure: Rebuilt.
2795 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2797 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2798 accordingly. Don't declare functions using op_rtn.
2800 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2802 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2803 params to be more standard.
2804 * (disassemble): Print absolute addresses and symbolic names for
2805 branch and jump targets.
2806 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2808 * (v850_opcodes): Add breakpoint insn.
2810 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2812 * m68k-opc.c: Move the fmovemx data register cases before the
2813 other cases, so that they get recognized before the data register
2814 does gets treated as a degenerate register list.
2816 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2818 * mips-opc.c: Add a case for "div" and "divu" with two registers
2819 and a destination of $0.
2821 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2823 * mips-dis.c (print_insn_arg): Add prototype.
2824 (_print_insn_mips): Ditto.
2826 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2828 * mips-dis.c (print_insn_arg): Print condition code registers as
2831 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2833 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2835 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2837 * v850-dis.c (disassemble): Make static. Provide prototype.
2839 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2841 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2844 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2846 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2847 ']' characters into the output stream.
2848 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2849 Add "memop" field to all opcodes (for the disassembler).
2850 Reorder opcodes so that "nop" comes before "mov" and "jr"
2851 comes before "jarl".
2853 * v850-dis.c (print_insn_v850): Fix typo in last change.
2855 * v850-dis.c (print_insn_v850): Properly handle disassembling
2856 a two byte insn at the end of a memory region when the memory
2857 region's size is only two byte aligned.
2859 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2861 * v850-dis.c (v850_reg_names): Define.
2862 (v850_sreg_names, v850_cc_names): Likewise.
2863 (disassemble): Very rough cut at printing operands (unformatted).
2865 * v850-opc.c (BOP_MASK): Fix.
2866 (v850_opcodes): Fix mask for jarl and jr.
2868 * v850-dis.c: New file. Skeleton for disassembler support.
2869 * Makefile.in Remove v850 references, they're not needed here.
2870 * configure.in: Add v850-dis.o when building v850 toolchains.
2871 * configure: Rebuilt.
2872 * disassemble.c (disassembler): Call v850 disassembler.
2874 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2875 (insert_d8_6, extract_d8_6): New functions.
2876 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2877 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2879 (IF4A, IF4B): Use "D7" instead of "D7S".
2880 (IF4C, IF4D): Use "D8_7" instead of "D8".
2881 (IF4E, IF4F): New. Use "D8_6".
2882 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2883 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2885 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2886 (v850_operands): Change D16 to D16_15, use special insert/extract
2887 routines. New new D16 that uses the generic insert/extract code.
2888 (IF7A, IF7B): Use D16_15.
2889 (IF7C, IF7D): New. Use D16.
2890 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2892 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2893 message. Issue an error if the branch offset is odd.
2895 * v850-opc.c: Add notes about needing special insert/extract
2896 for all the load/store insns, except "ld.b" and "st.b".
2898 * v850-opc.c (insert_d22, extract_d22): New functions.
2899 (v850_operands): Use insert_d22 and extract_d22 for
2901 (insert_d9): Fix range check.
2903 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2905 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2906 and set bits field to D9 and D22 operands.
2908 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2910 * v850-opc.c (v850_operands): Define SR2 operand.
2911 (v850_opcodes): "ldsr" uses R1,SR2.
2913 * v850-opc.c (v850_opcodes): Fix opcode specs for
2914 sld.w, sst.b, sst.h, sst.w, and nop.
2916 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2918 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2919 end of the opcode table.
2921 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2923 * d10v-opc.c (pre_defined_registers): Added register pairs,
2924 "r0-r1", "r2-r3", etc.
2926 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2928 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2929 Create I16U for an unsigned 16bit mmediate operand.
2930 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2932 * v850-opc.c (v850_operands): Define EP operand.
2933 (IF4A, IF4B, IF4C, IF4D): Use EP.
2935 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2936 with immediate operand, "movhi". Tweak "ldsr".
2938 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2939 correct. Get sld.[bhw] and sst.[bhw] closer.
2941 * v850-opc.c (v850_operands): "not" is a two byte insn
2943 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2945 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2947 * v850-opc.c (two): Get order of words correct.
2949 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2951 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2952 register source and destination operands.
2953 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2955 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2956 same thinko in "trap" opcode.
2958 * v850-opc.c (v850_opcodes): Add initializer for size field
2961 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2962 Add D8 for 8-bit unsigned field in short load/store insns.
2963 (IF4A, IF4D): These both need two registers.
2964 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2965 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2966 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2967 for "ldsr" and "stsr".
2968 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2971 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2972 short store word (sst.w).
2974 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2976 * v850-opc.c (v850_operands): Added insert and extract fields,
2977 pointers to functions that handle unusual operand encodings.
2979 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2981 * v850-opc.c (v850_opcodes): Enable "trap".
2983 * v850-opc.c (v850_opcodes): Fix order of displacement
2984 and register for "set1", "clr1", "not1", and "tst1".
2986 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2988 * v850-opc.c (v850_operands): Add "B3" support.
2989 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2992 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2994 * v850-opc.c: Close unterminated comment.
2996 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2998 * v850-opc.c (v850_operands): Add flags field.
2999 (v850_opcodes): add move opcodes.
3001 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3003 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3004 * configure: (bfd_v850v_arch) Add new case.
3005 * configure.in: (bfd_v850_arch) Add new case.
3006 * v850-opc.c: New file.
3008 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3010 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3012 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3014 * d10v-opc.c: Add additional information to the opcode
3015 table to help determinine which instructions can be done
3018 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3020 * mpw-make.sed: Update editing of include pathnames to be
3023 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3025 * arm-opc.h: Added "bx" instruction definition.
3027 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3029 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3031 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3033 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3035 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3037 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3039 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3041 * makefile.vms: Update for alpha-opc changes.
3043 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3045 * i386-dis.c (print_insn_i386): Actually return the correct value.
3046 (ONE, OP_ONE): #ifdef out; not used.
3048 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3050 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3051 Changed subi operand type to treat 0 as 16.
3053 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3055 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3058 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3060 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3061 memory transfer instructions. Add new format string entries %h and %s.
3062 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3065 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3067 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3068 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3070 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3072 * alpha-dis.c (print_insn_alpha_osf): Remove.
3073 (print_insn_alpha_vms): Remove.
3074 (print_insn_alpha): Make globally visible. Chose the register
3075 names based on info->flavour.
3076 * disassemble.c: Always return print_insn_alpha for the alpha.
3078 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3080 * d10v-dis.c (dis_long): Handle unknown opcodes.
3082 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3084 * d10v-opc.c: Changes to support signed and unsigned numbers.
3085 All instructions with the same name that have long and short forms
3086 now end in ".l" or ".s". Divs added.
3087 * d10v-dis.c: Changes to support signed and unsigned numbers.
3089 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3091 * d10v-dis.c: Change all functions to use info->print_address_func.
3093 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3095 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3096 move ccr/sr insns more strict so that the disassembler only
3097 selects them when the addressing mode is data register.
3099 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3100 * d10v-opc.c (pre_defined_registers): Declare.
3101 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3102 to pick a better name for the registers.
3104 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3106 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3107 operands for fexpand and fpmerge. From Christian Kuehnke
3108 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3110 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3112 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3113 print routine. Take new regnames and cpumask arguments.
3114 Kill the environment variable nonsense.
3115 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3116 (print_insn_alpha_vms): New function. Do VMS style regnames.
3117 * disassemble.c (disassembler): Test bfd flavour to pick
3118 between OSF and VMS routines. Default to OSF.
3120 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3122 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3123 * configure: Rebuild.
3124 * Makefile.in (install): Use @INSTALL_SHLIB@.
3126 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3128 * configure: (bfd_d10v_arch) Add new case.
3129 * configure.in: (bfd_d10v_arch) Add new case.
3130 * d10v-dis.c: New file.
3131 * d10v-opc.c: New file.
3132 * disassemble.c (disassembler) Add entry for d10v.
3134 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3136 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3137 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3139 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3141 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3142 distinguish between variants of the instruction set.
3143 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3144 distinguish between variants of the instruction set.
3146 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3148 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3149 the 8086 instruction set.
3150 * i386-dis.c: General cleanups. Make most things static. Add
3151 prototypes. Get rid of static variables aflags and dflags. Pass
3152 them as args (to almost everything).
3154 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3156 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3158 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3160 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3161 if the next arg is marked with SRC_IN_DST. Gross.
3163 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3164 we're looking for and find EXR.
3166 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3167 if we're looking for KBIT and we don't find it.
3169 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3172 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3173 3bit immediate operands.
3175 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3177 * Released binutils 2.7.
3179 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3180 <kkaempf@progis.ac-net.de>.
3182 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3184 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3186 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3188 * sparc-dis.c (print_insn_sparclite): New routine to print
3189 sparclite instructions.
3191 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3193 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3195 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3197 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3198 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3199 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3201 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3203 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3204 Use autoconf-set values.
3205 (docdir, oldincludedir): Removed.
3206 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3208 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3210 * alpha-opc.c: New file.
3211 * alpha-opc.h: Remove.
3212 * alpha-dis.c: Complete rewrite to use new opcode table.
3213 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3214 * configure: Rebuild with autoconf 2.10.
3215 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3216 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3218 (alpha-opc.o): New target.
3220 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3222 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3223 Set imm_added_to_rs1 even if the source and destination register
3226 * sparc-opc.c: Add some two operand forms of the wr instruction.
3228 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3230 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3233 * disassemble.c (disassembler): Handle H8/S.
3234 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3236 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3238 * sparc-opc.c: Add beq/teq as aliases for be/te.
3240 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3241 <sergei@msil.sps.mot.com>.
3243 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3245 * makefile.vms: New file.
3247 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3249 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3251 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3254 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3256 * i386-dis.c (OP_OFF): Call append_prefix.
3258 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3260 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3261 unsigned long to silence a warning from the Solaris PowerPC
3264 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3266 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3268 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3270 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3272 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3273 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3274 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3275 cpush, cpusha, cpull sparclet insns.
3277 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3279 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3281 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3283 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3284 Set F_FLOAT on other floating point instructions.
3286 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3288 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3290 (powerpc_opcodes): Add 860/821 specific SPRs.
3292 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3294 * configure.in: Permit --enable-shared to specify a list of
3295 directories. Set and substitute BFD_PICLIST.
3296 * configure: Rebuild.
3297 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3298 uses. Set to @BFD_PICLIST@.
3300 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3302 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3303 not "abs", which may be needed for the absolute in something
3304 like btst #0,@10:8. Print L_3 immediates separately from other
3305 immediates. Change ABSMOV reference to ABS8MEM.
3307 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3309 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3310 (current_arch_mask): New static global.
3311 (compute_arch_mask): New static function.
3312 (print_insn_sparc): Delete sparc_v9_p. New static local
3313 current_mach. Resort opcode table if current_mach changes.
3314 Generalize "insn not supported" test.
3315 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3316 Delete test for v9/!v9.
3317 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3319 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3320 (brfcx): Renamed to FBRX.
3321 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3322 coprocessor mnemonics are not supported on the sparclet).
3323 (condf): Renamed to CONDF.
3324 (SLCBCC2): Delete F_ALIAS flag.
3326 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3328 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3329 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3331 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3333 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3334 that the shared library version number is set correctly.
3336 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3338 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3339 Miles Bader <miles@gnu.ai.mit.edu>.
3340 * configure: Rebuild.
3342 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3344 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3347 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3349 * configure: Rebuild with autoconf 2.8.
3351 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3353 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3354 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3356 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3358 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3359 since they appear as targets in Makefile.in.
3360 * configure: Rebuild.
3362 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3364 * mpw-make.sed: Edit out shared library support bits.
3366 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3368 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3369 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3370 (sparc_opcodes): Add sparclet insns.
3371 (sparclet_cpreg_table): New static local.
3372 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3373 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3375 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3377 * i386-dis.c (index16): New static variable.
3378 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3380 (OP_indirE): Return result of OP_E.
3381 (OP_E): Check for 16 bit addressing mode, and disassemble
3382 correctly. Optimised 32 bit case a little. Don't print
3383 "(base,index,scale)" when sib specifies only an offset.
3385 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3387 * configure.in: Set and substitute SHLIB_DEP.
3388 * configure: Rebuild.
3389 * Makefile.in (SHLIB_DEP): New variable.
3390 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3391 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3392 COMMON_SHLIB, add them to piclist with appropriate modifications.
3393 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3394 here: just use piclist.
3396 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3398 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3399 (print_insn_sparc): Rewrite v9/not-v9 tests.
3400 (compare_opcodes): Likewise.
3401 * sparc-opc.c (MASK_<ARCH>): Define.
3402 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3403 (sparclet,v6notv9): Define.
3404 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3405 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3407 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3409 * configure.in: Call AC_PROG_CC before configure.host.
3410 * configure: Rebuild.
3412 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3414 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3416 * i386-dis.c (onebyte_has_modrm): New static array.
3417 (twobyte_has_modrm): New static array.
3418 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3420 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3422 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3425 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3427 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3430 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3432 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3433 m68010up, not just m68020up | cpu32.
3435 * Makefile.in (SONAME): New variable.
3436 ($(SHLINK)): Make a link to the transformed name, as well.
3437 (stamp-tshlink): New target.
3438 (install): Skip stamp-tshlink during install.
3440 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3442 * configure.in: Call AC_ARG_PROGRAM.
3443 * configure: Rebuild.
3444 * Makefile.in (program_transform_name): New variable.
3445 (install): Transform library name before installing it.
3447 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3449 * i960-dis.c (mem): Add HX dcinva instruction.
3451 Support for building as a shared library, based on patches from
3452 Alan Modra <alan@spri.levels.unisa.edu.au>:
3453 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3454 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3455 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3456 * configure: Rebuild.
3457 * Makefile.in (ALLLIBS): New variable.
3458 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3459 (COMMON_SHLIB, SHLINK): New variables.
3460 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3461 (STAGESTUFF): Remove variable.
3462 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3463 (stamp-piclist, piclist): New targets.
3464 ($(SHLIB), $(SHLINK)): New targets.
3465 ($(OFILES)): Depend upon stamp-picdir.
3466 (disassemble.o): Build twice if PICFLAG is set.
3467 (MOSTLYCLEAN): Add pic/*.o.
3468 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3469 (distclean): Remove pic and stamp-picdir.
3470 (install): Install shared libraries.
3471 (stamp-picdir): New target.
3473 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3475 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3476 Print unknown instruction as "unknown", rather than in hex.
3478 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3480 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3482 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3484 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3486 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3488 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3489 when necessary. From Ulrich Drepper
3490 <drepper@myware.rz.uni-karlsruhe.de>.
3492 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3494 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3495 sparc_num_opcodes. Update architecture enum values.
3496 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3497 (sparc_opcode_lookup_arch): New function.
3498 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3499 (sparc_opcodes): Add v9a shutdown insn.
3501 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3503 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3504 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3506 (print_insn_sparc64): Deleted.
3507 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3510 * sparc-opc.c (architecture_pname): Add v9a.
3512 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3514 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3515 incorrectly defined as 0x16 when it should be 0x15.
3516 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3517 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3518 excb (exception barrier) which is defined in the Alpha
3519 Architecture Handbook version 2.
3520 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3521 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3522 disassembled as or, for example.
3524 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3526 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3527 (_print_insn_mips): Change i from int to unsigned int.
3529 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3531 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3532 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3534 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3536 * i386-dis.c: Added Pentium Pro instructions.
3538 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3540 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3543 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3545 * sh-opc.h (sh_nibble_type): Added REG_B.
3546 (sh_arg_type): Added A_REG_B.
3547 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3549 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3551 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3553 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3555 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3557 * Makefile.in (distclean): Remove stamp-h. From Ronald
3558 F. Guilmette <rfg@monkeys.com>.
3560 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3562 From David Mosberger-Tang <davidm@azstarnet.com>:
3563 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3566 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3568 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3569 (sh_table): Added many SH3 opcodes.
3570 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3572 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3574 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3575 (subco,subco.): Mark this PPC, not PPCCOM.
3577 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3579 * configure: Rebuild with autoconf 2.7.
3581 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3583 * configure: Rebuild with autoconf 2.6.
3585 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3587 * configure.in: Sort list of architectures. Accept but do nothing
3588 for alliant, convex, pyramid, romp, and tahoe.
3590 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3592 * a29k-dis.c (print_special): Change num to unsigned int.
3594 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3596 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3599 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3601 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3602 * configure: Rebuilt.
3604 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3606 * configure.in: Add case for bfd_i860_arch.
3607 * configure: Rebuild.
3609 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3611 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3612 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3613 (NEXTDOUBLE): Likewise.
3614 (print_insn_m68k): Don't match fmoveml if there is more than one
3615 register in the list.
3616 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3618 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3620 * m68k-opc.c: Use #W rather than #w.
3621 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3623 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3625 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3626 and likewise for all the dbxx opcodes.
3628 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3630 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3632 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3634 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3635 the VR4100 specific instructions to the mips_opcodes structure.
3637 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3639 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3640 ugly Metrowerks bug in CW6, is fixed in CW7.
3642 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3644 * ppc-opc.c (whole file): Add flags for common/any support.
3646 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3648 * Makefile.in (BISON): Remove macro.
3649 (FLAGS_TO_PASS): Remove BISON.
3651 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3653 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3655 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3656 instructions that take no args by looking at the match mask.
3657 (print_insn_arg): Always print "%" before register names.
3658 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3659 [case '_']: Don't print "@#" before address.
3660 [case 'J']: Use "%s" as format string, not register name.
3661 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3663 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3665 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3668 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3670 From David Mosberger-Tang <davidm@azstarnet.com>
3672 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3673 (alpha_insn_set): added definitions for VAX floating point
3674 instructions (Unix compilers don't generate these, but handcoded
3675 assembly might still use them).
3677 * alpha-dis.c (print_insn_alpha): added support for disassembling
3678 the miscellaneous instructions in the Alpha instruction set.
3680 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3682 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3683 no longer create sysdep.h, sed ppc-opc.c to work around a
3684 serious Metrowerks C bug.
3685 * mpw-make.in: Remove.
3686 * mpw-make.sed: New file, used by mpw-configure to edit
3687 Makefile.in into an MPW makefile.
3689 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3691 * Makefile.in (maintainer-clean): New synonym for realclean.
3693 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3695 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3696 which use '0', '1', and '2' instead. Specify the proper size for
3697 a pmove immediate operand. Correct the pmovefd patterns to be
3698 moves to a register, not from a register.
3699 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3701 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3703 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3704 %psr, %wim, %tbr as F_NOTV9.
3706 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3708 * Makefile.in (Makefile): Just rebuild Makefile when running
3710 (config.h, stamp-h): New targets.
3711 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3712 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3713 rebuilding config.h.
3714 * configure: Rebuild.
3716 * mips-opc.c: Change unaligned loads and stores with "t,A"
3717 operands to use "t,A(b)".
3719 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3721 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3723 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3725 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3726 until 3 instead of until 2.
3728 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3730 * Makefile.in (ALL_CFLAGS): Define.
3731 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3732 (MOSTLYCLEAN): Add config.log.
3733 (distclean): Don't remove config.log.
3734 * configure.in: Substitute HDEFINES.
3735 * configure: Rebuild.
3737 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3739 * sh-opc.h (sh_arg_type): Add F_FR0.
3740 (sh_table, case fmac): Add F_FR0 as first argument.
3742 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3744 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3746 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3748 * sparc-dis.c: Remove all references to NO_V9.
3750 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3752 * aclocal.m4: Just include ../bfd/aclocal.m4.
3753 * configure: Rebuild.
3755 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3757 * sparc-dis.c (X_DISP19): Define.
3758 (print_insn, case 'G'): Use it.
3759 (print_insn, case 'L'): Sign extend displacement.
3761 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3763 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3764 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3765 host_makefile_frag or frags.
3766 * aclocal.m4: New file.
3767 * configure: Rebuild.
3768 * Makefile.in (INSTALL): Set to @INSTALL@.
3769 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3770 (INSTALL_DATA): Set to @INSTALL_DATA@.
3772 (AR_FLAGS): Set to rc rather than qc.
3773 (CC): Define as @CC@.
3774 (CFLAGS): Set to @CFLAGS@.
3775 (@host_makefile_frag@): Remove.
3776 (config.status): Remove dependency upon @frags@.
3778 * configure.in: ../bfd/config.bfd now just sets shell variables.
3779 Use them rather than looking through target Makefile fragments.
3780 * configure: Rebuild.
3782 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3784 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3786 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3788 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3789 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3792 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3793 (lookup_{name,value}): New functions.
3794 (prefetch_table): New static local.
3795 (sparc_{encode,decode}_prefetch): New functions.
3796 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3798 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3800 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3803 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3805 * sh-dis.c: Correct comment on first line of file.
3807 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3809 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3811 * sparc-opc.c (asi, membar): New static locals.
3812 (sparc_{encode,decode}_{asi,membar}): New functions.
3813 (sparc_opcodes, membar insn): Fix.
3814 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3815 Support decoding of membar masks.
3818 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3820 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3822 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3824 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3825 and likewise for the other branches. Add bhs as an alias for bcc,
3826 and likewise for the size variants. Add dbhs as an alias for
3829 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3831 * sh-opc.h (FP sts instructions): Update to match reality.
3833 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3835 * m68k-dis.c: (fpcr_names): Add % before all register names.
3836 (reg_names): Likewise.
3837 (print_insn_arg): Don't explicitly print % before register names.
3838 Add % before register names in static array names. In case 'r',
3839 print data registers as `@(Dn)', not `Dn@'. When printing a
3840 memory address, don't print @# before it.
3841 (print_indexed): Change base_disp and outer_disp from int to
3842 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3843 syntax. Sign extend 8 byte displacement correctly.
3844 (print_base): Print using MIT syntax. Print zpc when appropriate.
3845 Change parameter disp from int to bfd_vma.
3847 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3850 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3852 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3853 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3854 * sh-opc.h (sh_arg_type): Add new operand types.
3855 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3857 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3859 * Makefile.in (distclean): Remove generated file config.h.
3861 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3863 * Makefile.in (distclean): Remove generated file config.h.
3865 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3867 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3869 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3871 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3872 rather than numopcodes. Use m68k_opcodes rather than removed
3873 opcode function. Don't check F_ALIAS.
3874 (print_insn_arg): Change first parameter to be const char *.
3875 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3876 (m68k-opc.o): New target.
3877 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3878 * configure: Rebuild.
3880 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3882 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3883 (opcode_bits, opcode_hash_table): New variables.
3884 (opcodes_initialized): Renamed from opcodes_sorted.
3885 (build_hash_table): New function.
3886 (is_delayed_branch): Use hash table.
3887 (print_insn): Renamed from print_insn_sparc, made static.
3888 Build and use hash table. If !sparc64, ignore sparc64 insns,
3889 and vice-versa if sparc64.
3890 (print_insn_sparc, print_insn_sparc64): New functions.
3891 (compare_opcodes): Move sparc64 opcodes to end.
3892 Print commutative insns with constant second.
3893 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3895 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3897 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3898 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3899 avoids printing a delay slot in a delay slot.
3900 * sh-opc.h (sh_table): Fully bracket last entry.
3902 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3904 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3906 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3908 * configure.in: Get host_makefile_frag from ${srcdir}.
3910 * configure.in: Autoconfiscated. Check for string[s].h. Create
3911 config.h from config.in. Don't set up sysdep.h link.
3912 * sysdep.h: New file.
3913 * configure, config.in: New files, generated from configure.in.
3914 * Makefile.in: Updated to be processed autoconf-style.
3915 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3916 (Makefile): Depend on config.status.
3917 (config.status): New rule.
3918 * configure.bat: Update Makefile substitutions.
3920 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3922 * mips-opc.c (L1): Define.
3923 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3924 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3927 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3929 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3930 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3931 have multiple add units but only a single logical unit.
3933 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3934 shifted by 18, without any insertion or extraction function.
3935 (insert_cr, extract_cr): Remove.
3937 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3939 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3942 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3944 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3945 * sh-opc.h: Add copyright.
3947 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3949 * Makefile.in (crunch-m68k): Delete extra target accidentally
3950 checked in a while ago.
3952 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3954 * sh-opc.h (sh_table): Add SH3 support.
3956 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3958 * sh-opc.h: Added bsrf and braf.
3960 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3962 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3963 bogus [ls]fm{ea,fd} patterns.
3965 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3966 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3967 initialize it from memory. Make function static.
3968 (print_insn_{big,little}_arm): New functions.
3969 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3970 the correct endianness.
3972 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3974 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3977 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3979 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3980 17th, so that it builds again using GCC as the compiler.
3982 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3984 * mips-dis.c (print_insn_little_mips): Cast return value from
3985 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3986 expects an unsigned long, and that might be fewer words of
3987 argument storage (e.g., if bfd_vma is long long on a 32-bit
3989 (print_insn_big_mips): Likewise with bfd_getb32 value.
3990 (_print_insn_mips): Now static.
3992 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3994 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3995 gcc memory hog problem with initializer is fixed.
3997 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3999 Merge in support for Mac MPW as a host.
4000 (Old change descriptions retained for informational value.)
4002 * mpw-config.in (archname): Compute from the config.
4003 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4005 * mpw-config.in (target_arch): Compute from canonical target.
4006 (m68k, mips, powerpc, sparc): Add architectures.
4007 * mpw-make.in (disassemble.c.o): Add.
4008 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4010 * mpw-config.in (BFD_MACHINES): Set to a default value.
4011 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4013 * mpw-make.in (CSEARCH): Add extra-include to search path.
4015 * mpw-config.in (varargs.h): Don't create.
4016 (sysdep.h): Create using forward-include.
4017 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4019 * mpw-config.in: New file, MPW version of configure.in.
4020 * mpw-make.in: New file, MPW version of Makefile.in.
4022 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4024 * alpha-dis.c (print_insn_alpha): Put empty statement after
4027 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4029 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4030 (low_sign_extend): Likewise.
4031 (get_field): Delete unused function.
4032 (set_field, deposit_14, deposit_21): Likewise.
4034 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4036 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4039 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4041 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4043 * alpha-opc.h (OSF_ASMCODE): define
4044 print pal-code names as defined in App C of the
4045 Alpha Architecture Reference Manual
4047 * alpha-dis.c: cleaned up output
4048 print stylized code forms as defined in App A.4.3 of the
4049 Alpha Architecture Reference Manual
4051 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4053 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4055 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4058 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4060 * m68k-dis.c (opcode): New function. Returns address of opcode
4061 table entry given index, even if the opcode table was split to
4062 work around gcc bugs.
4063 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4065 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4066 (reg_names): Now const.
4067 (print_insn_arg): Arrays cacheFieldName and names now const.
4068 (print_indexed): Array scales now const.
4070 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4072 * ppc-opc.c: Sort recently added instructions by minor opcode
4073 number within major opcode number.
4075 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4077 * hppa-dis.c: Include libhppa.h.
4079 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4081 * mips-opc.c: Change dli to use M_DLI, and add dla.
4083 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4085 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4087 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4089 * mips-opc.c: Add r4650 mul instruction.
4091 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4093 * mips-opc.c: Add uld and usd macros for unaligned double load and
4096 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4098 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4099 mfdcr, mtdcr, icbt, iccci.
4101 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4103 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4104 signed char fields to shorts, more portable.
4106 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4108 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4109 char fields as signed chars, since they may have negative values.
4111 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4113 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4114 (mycroft@netbsd.org).
4116 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4118 From "Logg, Ed" <elogg@ea.com>:
4119 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4120 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4123 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4125 * ppc-opc.c: Changes based on patch from David Edelsohn
4126 <edelsohn@mhpcc.edu>.
4127 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4130 (insert_tbr): New static function.
4131 (extract_tbr): New static function.
4132 (XFXFXM_MASK, XFXM): Define.
4133 (XSPRBAT_MASK, XSPRG_MASK): Define.
4134 (powerpc_opcodes): Add instructions to access special registers by
4135 name. Add mtcr and mftbu.
4137 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4139 * mips-opc.c (P3): Define.
4140 (mips_opcodes): Add mad and madu.
4142 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4144 * configure.in: Add W65 support.
4145 * disassemble.c: Likewise.
4146 * w65-opc.h, w65-dis.c: New files.
4148 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4150 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4153 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4155 * mips-opc.c: Add dli as a synonym for li.
4157 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4159 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4160 print something for reserved opcode values, even if it won't
4163 * mips-dis.c (_print_insn_mips): When initializing, shift right
4164 and mask, to avoid sign extension problems on the Alpha.
4166 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4169 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4171 * sh-opc.h (mov.l gbr): Get direction right.
4172 * sh-dis.c (print_insn_shx): New function.
4173 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4174 print opcodes with right byte order.
4176 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4178 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4179 to avoid conflicts with getopt.
4181 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4183 * hppa-dis.c (print_insn_hppa): Read the instruction using
4184 bfd_getb32, so that it works on a little endian or 64 bit host.
4185 Remove unused local variable op.
4187 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4189 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4190 addu does not work correctly if -mips3.
4192 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4194 * a29k-dis.c (print_special): Add special register names defined
4195 on 29030, 29040 and 29050.
4196 (print_insn): Handle new operand type 'I'.
4198 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4200 * Makefile.in (INSTALL): Use top level install.sh script.
4202 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4204 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4205 that it works on a little endian host.
4207 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4209 * configure.in: Use ${config_shell} when running config.bfd.
4211 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4213 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4215 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4217 * a29k-dis.c (print_insn): Print the opcode.
4219 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4221 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4223 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4225 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4227 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4229 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4230 which store a value into memory.
4232 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4234 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4235 * arm-dis.c, arm-opc.h: New files.
4237 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4239 * Makefile.in (ns32k-dis.o): Add dependency.
4240 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4241 string, not as array of chars.
4243 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4245 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4247 * sparc-opc.c: Added sparclite extended FP operations, and
4248 versions of v9 impdep* instructions permitting specification of
4251 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4253 * i960-dis.c (reg_names): Now const.
4254 (struct sparse_tabent): New type, copied from array type in mem
4256 (ctrl): Local static array ctrl_tab now const.
4257 (cobr): Local static array cobr_tab now const.
4258 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4259 static variable mem_tab no longer explicitly initialized. Changed
4260 mem_init to const array of struct sparse_tabent.
4261 (reg): Local static variable reg_tab no longer explicitly
4262 initialized. Changed reg_init to const array of struct
4264 (ea): Local static array scale_tab now const.
4266 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4269 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4271 * configure.bat: the disassember needs to be enabled for
4272 "objdump -d" to work in djgpp.
4274 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4276 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4277 (invalid_float): Enabled general version, doesn't require running
4278 on ns32k host. Changed to take char* argument, and test for
4279 explicitly specified sizes, instead of using sizeof() on host CPU
4281 (INVALID_FLOAT): Cast first argument.
4282 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4283 list_P032, list_M032): Now const.
4284 (optlist, list_search): Made appropriate arguments now point to
4286 (print_insn_arg): Changed static array of one-character-string
4287 pointers into a static const array of characters; fixed sprintf
4288 statement accordingly.
4290 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4292 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4293 from distribution. A ns32k-dis.c from a previous distribution has
4294 been brought up to date and supports the new interface.
4296 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4298 * configure.in: add bfd_ns32k_arch target support.
4300 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4301 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4303 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4305 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4308 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4310 * h8300-dis.c, mips-dis.c: Don't use true and false.
4312 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4314 * configure.in: Change --with-targets to --enable-targets.
4316 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4318 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4319 opcodes to the first instruction with that opcode, to speed
4320 disassembly of large files. From ralphc@pyramid.com (Ralph
4323 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4325 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4327 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4329 * configure.bat: update to latest makefile.in
4331 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4333 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4334 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4335 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4336 slot insn is in a delay slot.
4337 * z8k-opc.h: (resflg): Fix patterns.
4338 * h8500-opc.h Fix CR insn patterns.
4340 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4342 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4343 "cmpl" before POWER versions, so that gas -many uses them.
4345 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4347 * disassemble.c: New file.
4348 * Makefile.in (OFILES): Add disassemble.o.
4349 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4350 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4351 binutils/configure.in.
4353 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4354 opcode being examined.
4356 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4358 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4359 (insert_ral, insert_ram, insert_ras): New functions.
4360 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4361 RAS for store with update.
4363 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4365 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4366 (edelsohn@npac.syr.edu).
4368 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4370 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4373 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4375 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4377 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4379 * ppc-opc.c (powerpc_operands): The signedp field has been
4380 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4381 instead. Add new operand SISIGNOPT.
4382 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4383 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4384 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4387 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4389 * i386-dis.c (struct private): Renamed to dis_private. `private'
4390 is a reserved word for dynix cc.
4392 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * configure.in: Change error message to refer to bfd/config.bfd
4395 rather than bfd/configure.in.
4397 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4399 * ppc-opc.c: Define POWER2 as short alias flag.
4400 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4403 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4405 * i960-dis.c (print_insn_i960): Don't read a second word for
4406 opcodes 0, 1, 2 and 3.
4408 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4410 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4412 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4414 * m68881-ext.c: Removed; no longer used.
4415 * Makefile.in: Changed accordingly.
4417 * m68k-dis.c (ext_format_68881): Don't declare.
4418 (print_insn_m68k): If an instruction uses place 'i', it uses at
4419 least four fixed bytes.
4420 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4421 extended float, convert to double using floatformat_to_double, not
4422 ieee_extended_to_double, and fetch the data before converting it.
4424 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4426 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4427 davidj@ICSI.Berkeley.EDU (David Johnson).
4429 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4431 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4432 PowerPC uses bdnz[l][a].
4434 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4436 * dis-buf.c, i386-dis.c: Include sysdep.h.
4438 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4440 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4442 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4443 by Motorola PowerPC 601 with PPC_OPCODE_601.
4444 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4445 Disassemble Motorola PowerPC 601 instructions as well as normal
4446 PowerPC instructions.
4448 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4450 * i960-dis.c (reg, mem): Just use a static array instead of
4453 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4455 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4456 condition name index if this is for a negated condition.
4458 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4459 Floating point format for 'H' operand is backwards from normal
4460 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4461 operands (fmpyadd and fmpysub), handle bizarre register
4462 translation correctly for single precision format.
4464 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4465 or 'I' operands if the next format specifier is 'M' (fcmp
4466 condition completer).
4468 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4470 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4471 single number giving a bitmask for the MB and ME fields of an M
4472 form instruction. Change NB to accept 32, and turn it into 0;
4473 also turn 0 into 32 when disassembling. Seperated SH from NB.
4474 (insert_mbe, extract_mbe): New functions.
4475 (insert_nb, extract_nb): New functions.
4476 (SC_MASK): Mask out SA and LK bits.
4477 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4478 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4479 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4480 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4481 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4482 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4483 (powerpc_macros): Define table of macro definitions.
4484 (powerpc_num_macros): Define.
4486 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4487 if PPC_OPERAND_NEXT is set.
4489 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4491 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4492 char. Retrieve contents using bfd_getl32 instead of shifting.
4494 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4496 * ppc-opc.c: New file. Opcode table for PowerPC, including
4497 opcodes for POWER (RS/6000).
4498 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4499 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4500 (CFILES): Add ppc-dis.c.
4501 (ppc-dis.o, ppc-opc.o): New targets.
4502 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4504 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4506 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4507 No space before 'u', 'f', or 'N'.
4509 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4511 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4512 farther than we should.
4514 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4516 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4518 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4520 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4522 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4523 needs it, to prevent reading past the end of a section.
4525 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4528 Removed t,A case for la; always use t,A(b) case.
4530 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4532 From Ted Lemen <mellon@pepper.ncd.com>
4533 * mips-dis.c (print_insn_arg): Handle 'k'.
4534 * mips-opc.c: Make cache use k, not t.
4536 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4538 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4539 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4540 FLOAT_FORMAT_CODE to put out floating point register names.
4542 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4544 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4546 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4548 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4550 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4553 larger than 32. Moved dsxx32 variants first for disassembler.
4555 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4557 * z8kgen.c, z8k-opc.h: Add full lda information.
4559 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4561 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4562 movb instructions. Any necessary space will be emitted by
4563 the code to handle nullification completers.
4565 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4569 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4571 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4572 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4574 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4578 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4580 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4581 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4583 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4585 * m88k-dis.c (m88kdis): comment change. Remove space after
4587 (printop): handle new arg types DEC and XREG for m88110.
4589 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4591 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4592 type for absolute branch addresses. Delete special
4593 "ble" and "be" code in 'W' operand code.
4595 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4597 * mips-opc.c: Set hazard information correctly for branch
4598 likely instructions.
4600 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4602 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4603 info->fprintf_func for printing and info->print_address_func for
4606 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4610 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4613 Corrected second case of "b" for disassembler.
4615 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4617 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4618 to BFD swapping routines to correspond to BFD name changes.
4620 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4622 * mips-opc.c: Change div machine instruction to be z,s,t rather
4623 than s,t. Change div macro to be d,v,t rather than d,s,t.
4624 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4625 rem and remu which generates only the corresponding div
4626 instruction. This is for compatibility with the MIPS assembler,
4627 which only generates the simple machine instruction when an
4628 explicit destination of $0 is used.
4629 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4631 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4633 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4634 WR_31 hazard for bal, bgezal, bltzal.
4636 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4638 * hppa-dis.c (print_insn_hppa): Use print function
4639 from within the disassemble_info, not fprintf_filtered.
4641 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4643 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4644 Law, law@cs.utah.edu.)
4646 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * mips-opc.c ("absu"): Removed.
4651 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4653 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4654 Changed hazard information to distinguish between memory load
4655 delays and coprocessor load delays.
4657 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4659 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4661 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4663 * configure.in: Don't pass cpu to config.bfd.
4665 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4667 * m88k-dis.c (m88kdis): Make class unsigned.
4669 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4671 * alpha-dis.c (print_insn_alpha): One branch format case was
4672 missing the instruction name.
4674 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4676 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4677 Add the arch-specific auxiliary files.
4678 (OFILES): Remove the arch-specific auxiliary files
4679 and use BFD_MACHINES instead of DIS_LIBS.
4680 * configure.in: Set BFD_MACHINES based on --with-targets option.
4682 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4684 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4687 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4689 * sparc-opc.c: Change CONST to const to deal with gcc
4690 -Dconst=__const -traditional.
4692 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4694 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4695 coprocessor instructions out of #if 0, and made them use new
4698 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4700 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4702 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4704 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4705 instruction, for use by the disassembler.
4707 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4708 hand-coded sign extensions that depended on 32-bit host ints.
4709 FIXME, we still depend on big-endian host bitfield ordering.
4710 (sparc_print_insn): Set the insn_info_valid field, and the
4711 other fields that describe the instruction being printed.
4713 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4715 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4716 `jmp' instead of just one of them.
4718 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4720 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4721 (fput_fp_reg_r): Renamed from fput_reg_r.
4722 (fput_fp_reg): New function.
4723 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4725 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4727 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4729 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4731 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4733 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4734 don't output a space.
4736 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4738 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4740 * mips-opc.c: New file, containing opcode table from
4741 ../include/opcode/mips.h.
4742 * Makefile.in: Add it.
4744 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4746 * m88k-dis.c: New file, moved in from gdb and changed to use the
4747 new dis-asm.h disassembler interface.
4748 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4749 (m88k-dis.o): New target.
4751 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4753 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4754 argument string const char * to correspond to opcode/mips.h.
4756 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4758 * mips-dis.c: Updated to account for name changes in new version
4760 * Makefile.in: Added header file dependencies.
4762 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4764 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4766 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4768 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4769 extend, rather than shifts.
4771 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4773 * Makefile.in: Undo 15 June change.
4775 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4777 * m68k-dis.c (print_insn_arg): Change return value to byte count
4779 * m68k-dis.c: Re-write to detect invalid operands before
4780 printing anything, so we can handle this the same way we
4781 handle invalid opcodes.
4783 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4785 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4787 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4789 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4792 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4794 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4796 * configure.in: Do make sysdep.h link.
4797 * Makefile.in: Search ../include. Don't search ../bfd.
4799 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4801 Changes from Jeff Law, law@cs.utah.edu:
4802 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4803 Do not print a space before the completers specified by
4806 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4808 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4809 defined, since gdb has been fixed.
4811 Changes from Jeff Law, law@cs.utah.edu:
4812 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4813 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4814 be a *disassemble_info, not a *FILE.
4815 * hppa-dis.c: Support 'd', '!', and 'a'.
4816 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4817 * hppa-dis.c: Delete cases which are no longer needed.
4819 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4821 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4823 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4825 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4828 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4830 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4831 * configure.in: No longer need to configure to get sysdep.h.
4833 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4835 * Patches from Jeffrey Law <law@cs.utah.edu>.
4836 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4837 templates for 1.1 FP computational instructions.
4839 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4841 * h8500-dis.c (print_insn_h8500): Address argument is type
4843 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4846 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4847 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4849 * sparc-dis.c (compare_opcodes): Move static declaration to
4852 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4854 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4855 instruction, remove unimp hack from 'l' argument.
4857 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4859 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4862 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4864 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4865 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4868 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4870 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4871 arrays of string pointers to 2-d arrays of chars, to save
4874 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4876 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4877 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4879 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4881 * hppa-dis.c: New file from Utah, adapted to new disassembler
4883 * Makefile.in: Include it.
4885 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4887 * sh-dis.c, sh-opc.h: New files.
4889 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4891 * alpha-dis.c, alpha-opc.h: New files.
4893 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4895 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4898 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4900 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4902 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4904 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4907 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4909 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4910 and double percent signs a few places.
4912 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4914 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4915 Use info->print_address_func not print_address.
4917 * dis-buf.c (generic_print_address): New function.
4919 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4921 * Makefile.in: Add sparc-dis.c.
4922 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4924 Add `add' instruction to the set that get checked
4925 for a preceding `sethi' in order to print an absolute address.
4926 * (print_insn): Disassembly prefers real instructions.
4927 (is_delayed_branch): Speed up.
4928 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4929 Still missing some float ops, and needs testing.
4930 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4931 F_ALIAS. Use printf, not fprintf, when not passing a file
4933 (compare_opcodes): Check that identical instructions have
4934 identical opcodes, complain otherwise.
4937 * Include reg_names.
4939 Use dis-asm.h/read_memory_func interface.
4941 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4943 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4944 deliberately return non-zero to setjmp from longjmp. Otherwise
4945 this code fails to compile.
4947 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4949 * m68k-dis.c: Fix prototype for fetch_arg().
4951 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4953 * dis-buf.c: New file, for new read_memory_func interface.
4954 Makefile.in (OFILES): Include it.
4955 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4956 Use new read_memory_func interface.
4958 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4960 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4961 * h8500-opc.h: Fix couple of opcodes.
4963 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4965 * Makefile.in: add dvi & installcheck targets
4967 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4969 * Makefile.in: Update for h8500-dis.c.
4971 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4973 * h8500-dis.c, h8500-opc.h: New files
4975 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4977 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4978 ../include/dis-asm.h.
4979 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4980 and ../gdb/m68k-pinsn.c).
4981 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4982 and ../gdb/i386-pinsn.c).
4983 * m68881-ext.c: New file. Moved definition of
4984 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4985 * Makefile.in: Adjust for new files.
4986 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4987 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4988 can be dis-assembled.
4990 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4992 * mips-dis.c (print_insn_arg): Now returns void.
4994 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4996 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4997 files that use the macros.
4999 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5001 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5002 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5003 (CFILES): Added mips-dis.c.
5005 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5007 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5008 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5010 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5012 * Makefile.in: Improve *clean rules.
5013 * configure.in: Allow a default host.
5015 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5017 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5018 files include other sysdep files
5020 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5022 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5024 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5026 * configure.in: For host support, use ../bfd/configure.host
5027 so it stays in sync with the ../bfd/hosts database.
5029 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5031 * configure.in: use cpu-vendor-os triple instead of nested cases
5033 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5035 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5036 *always* the wrong one.
5038 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5040 * z8kgen.c: added copyright info
5042 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5044 * z8k-dis.c (unparse_instr): prettier tabs
5045 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5047 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5049 * configure.in: Add ncr* configuration.
5050 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5051 picayune ANSI compilers happy.
5053 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5055 * configure.in (i386): Make i386 and i486 synonymous for now.
5056 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5058 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5060 * Makefile.in (install): Fix typo.
5062 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5064 * Makefile.in (make): Remove obsolete crud.
5065 (sparc-opc.o): Avoid Sun Make VPATH bug.
5067 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5069 * Makefile.in: since there are no SUBDIRS, remove rule and
5070 references of subdir_do.
5072 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5074 * Makefile.in (install): Get the library name right here too.
5075 Don't install bfd.h, since it's unrelated to this library. No
5076 subdirs to recurse into, either.
5077 (CFILES): The source file has a .c suffix, not .o.
5079 * sparc-opc.c: New file, moved from BFD.
5080 * Makefile.in (OFILES): Build it.
5082 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5084 * z8k-dis.c: fixed forward refferences of some declarations.
5086 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5088 * Makefile.in: get the name of the library right
5090 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5092 * z8k-dis.c: knows how to disassemble z8k stuff
5093 * z8k-opc.h: new file full of z8000 opcodes
5097 version-control: never
projects / platform / upstream / binutils.git / blob