1 1999-09-04 H.J. Lu <hjl@gnu.org>
3 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
5 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
7 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
9 1999-08-04 Doug Evans <devans@casey.cygnus.com>
11 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
12 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
13 * m32r-opinst.c: Rebuild.
15 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
17 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
20 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
22 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
23 extract_10U_store): New.
24 (print_insn_hppa): Add new completers.
26 * hppa-dis.c (signed_unsigned_names,mix_half_names,
27 saturation_names): New.
28 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
30 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
32 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
34 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
35 to decide to print a space.
37 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
39 * i386-dis.c: Add AMD athlon instruction support.
41 1999-08-10 Ian Lance Taylor <ian@zembu.com>
43 From Wally Iimura <iimura@microunity.com>:
44 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
45 overflow at end of address space.
46 (generic_print_address): Use sprintf_vma.
48 1999-08-08 Ian Lance Taylor <ian@zembu.com>
50 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
51 MKDEP. Rebuild dependencies.
52 * Makefile.in: Rebuild.
54 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
56 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
57 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
58 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
59 (print_insn_hppa): Add 64 bit condition completers.
61 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
63 * hppa-dis.c (print_insn_hppa): Change condition args to use
66 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
68 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
71 1999-07-21 Ian Lance Taylor <ian@zembu.com>
74 * configure.bat: Remove; obsolete.
76 1999-07-11 Ian Lance Taylor <ian@zembu.com>
78 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
79 (generic_strcat_address): Add cast to avoid warning.
80 * i386-dis.c: Initialize all structure fields to avoid warnings.
81 Add ATTRIBUTE_UNUSED as appropriate.
83 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
85 * sparc-dis.c (print_insn_sparc): Differentiate between
86 addition and oring when guessing symbol for comment.
88 1999-07-05 Nick Clifton <nickc@cygnus.com>
90 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
93 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
95 * i386-dis.c: Mention intel mode specials in macro char comment.
97 1999-06-21 Ian Lance Taylor <ian@zembu.com>
99 * alpha-dis.c: Don't include <stdlib.h>.
100 * arm-dis.c: Include "sysdep.h".
101 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
103 * Makefile.am: Rebuild dependencies.
104 * Makefile.in: Rebuild.
106 1999-06-16 Nick Clifton <nickc@cygnus.com>
108 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
111 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
113 * arm-dis.c (arm_regnames): Turn into a pointer to a register
115 (arm_regnames_standard): New variable: Array of ARM register
116 names according to ARM instruction set nomenclature.
117 (arm_regnames_apcs): New variable: Array of ARM register names
118 according to ARM Procedure Call Standard.
119 (arm_regnames_raw): New variable: Array of ARM register names
120 using just 'r' and the register number.
121 (arm_toggle_regnames): New function: Toggle the chosen register set
123 (parse_disassembler_options): New function: Parse any target
124 disassembler command line options.
125 (print_insn_big_arm): Call parse_disassembler_options if any
127 (print_insn_little_arm): Call parse_disassembler_options if any
130 1999-06-13 Ian Lance Taylor <ian@zembu.com>
132 * i386-dis.c (FWAIT_OPCODE): Define.
133 (used_prefixes): New static variable.
134 (fetch_data): Don't print an error message if we have already
135 fetched some bytes successfully.
136 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
137 (prefix_name): New static function.
138 (print_insn_i386): If setjmp fails, indicating a data error, but
139 we have managed to fetch some bytes, print the first one as a
140 prefix or a .byte pseudo-op. If fwait is followed by a non
141 floating point instruction, print the first prefix. Set
142 used_prefixes when prefixes are used. If any prefixes were not
143 used after disassembling the instruction, print the first prefix
144 instead of printing the instruction.
145 (putop): Set used_prefixes when prefixes are used.
146 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
147 (OP_DIR, OP_SIMD_Suffix): Likewise.
149 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
151 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
152 Support signx %reg, clruw %reg.
154 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
156 * sparc-opc.c: Add aliases Solaris as supports.
158 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
160 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
161 * Makefile.in: Regenerated.
163 1999-06-03 Philip Blundell <philb@gnu.org>
165 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
166 when target is PC-relative.
168 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
170 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
173 * m68k-dis.c (fetch_arg): Add places `n', `o'.
175 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
176 Add mcf5206e to appropriate instructions.
177 Add alias for MAC, MSAC.
179 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
182 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
183 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
185 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
187 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
189 * i386-dis.c (Ed): Define.
190 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
192 (OP_rm): Rename to OP_Rd.
195 (putop): Add const to template and p.
196 (print_insn_x86): Delete.
197 (print_insn_i386): Merge old function print_insn_x86. Add const
199 (struct dis386): Add const to name.
200 (dis386_att, dis386_intel): Add const.
201 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
202 (names32, names16, names8, names_seg, index16): Add const.
203 (grps, prefix_user_table, float_reg): Add const.
204 (float_mem_att, float_mem_intel): Add const.
205 (oappend): Add const to s.
206 (OP_REG): Add const to s.
207 (ptr_reg): Add const to s.
208 (dofloat): Add const to dp.
209 (OP_C): Don't skip modrm, it's now done in OP_Rd.
212 (OP_Rd): Check for valid mod. Call Op_E to print.
213 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
214 (OP_MS): Check for valid mod. Call Op_EM to print.
215 (OP_3DNowSuffix): Set obufp and use oappend rather than
216 strcat. Call BadOp() for errors.
217 (OP_SIMD_Suffix): Likewise.
218 (BadOp): New function.
220 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
222 * i386-dis.c (dis386_intel): Remove macro chars, except for
223 jEcxz. Change cWtR and cRtd to cW and cR.
224 (dis386_twobyte_intel): Remove macro chars here too.
225 (putop): Handle R and W macros for intel mode.
227 * i386-dis.c (SIMD_Fixup): New function.
228 (dis386_twobyte_att): Use it on movlps and movhps, and change
229 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
230 (dis386_twobyte_intel): Same here.
232 * i386-dis.c (Av): Remove.
236 (OP_SIMD_Suffix): New function.
237 (OP_DIR): Remove dead code.
238 (eAX_reg..eDI_reg): Renumber.
239 (onebyte_has_modrm): Table numbering comments.
240 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
241 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
242 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
243 and handle SIMD cmp insns in OP_SIMD_Suffix.
244 (info->bytes_per_line): Bump from 5 to 6.
246 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
247 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
249 PIII SIMD support from Doug Ledford <dledford@redhat.com>
250 * i386-dis.c (XM, EX, None): Define.
251 (OP_XMM, OP_EX, OP_None): New functions.
252 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
253 (GRP14): Rename to GRPAMD.
254 (GRP*): Add USE_GROUPS flag.
256 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
257 (twobyte_has_modrm): Add SIMD entries.
258 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
259 (grps): Add SIMD insns.
260 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
261 oappend repz if uses_f3_prefix. Add code to handle new groups for
264 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
265 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
266 operand from Av to Jv.
268 1999-05-07 Nick Clifton <nickc@cygnus.com>
270 * mcore-dis.c (print_insn_mcore): Use .short to display
271 unidentified instructions, not .word.
273 1999-04-26 Tom Tromey <tromey@cygnus.com>
275 * aclocal.m4, configure: Updated for new version of libtool.
277 1999-04-14 Doug Evans <devans@casey.cygnus.com>
279 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
280 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
282 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
284 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
287 1999-04-10 Doug Evans <devans@casey.cygnus.com>
289 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
290 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
292 1999-04-06 Ian Lance Taylor <ian@zembu.com>
294 * opintl.h (LC_MESSAGES): Never define.
296 1999-04-04 Ian Lance Taylor <ian@zembu.com>
298 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
299 (separator_char, scale_char): Likewise.
300 (print_insn_x86): Likewise.
301 (print_insn_i386): Likewise. Add declaration.
303 1999-03-26 Doug Evans <devans@casey.cygnus.com>
305 * fr30-dis.c: Rebuild.
306 * m32r-dis.c: Rebuild.
308 1999-03-23 Ian Lance Taylor <ian@zembu.com>
310 * m68k-opc.c: Change compare instructions to use "@s" rather than
311 ";s" when used with an immediate operand.
313 1999-03-22 Doug Evans <devans@casey.cygnus.com>
315 * cgen-opc.c (cgen_set_cpu): Delete.
316 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
317 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
319 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
321 * po/opcodes.pot: Rebuild.
323 1999-03-16 Martin Hunt <hunt@cygnus.com>
325 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
327 1999-03-11 Doug Evans <devans@casey.cygnus.com>
329 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
330 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
331 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
332 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
333 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
334 * m32r-opinst.c: Rebuild.
336 1999-02-25 Doug Evans <devans@casey.cygnus.com>
338 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
339 (cgen_hw_lookup_by_num): Rewrite.
340 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
341 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
342 * m32r-opinst.c: Rebuild.
344 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
346 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
347 (insert_jhint): Fix insertion mask.
348 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
350 1999-02-10 Doug Evans <devans@casey.cygnus.com>
352 * Makefile.in: Rebuild.
354 1999-02-09 Doug Evans <devans@casey.cygnus.com>
356 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
357 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
358 * Makefile.am: Remove references to them.
359 (HFILES): Add fr30-desc.h,m32r-desc.h.
360 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
362 (ALL_MACHINES): Update.
363 * configure.in: Redo handling of cgen_files.
364 (bfd_i960_arch): Delete i960c-*.lo files.
365 * configure: Regenerate.
366 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
367 (hash_insn_array): Rewrite.
368 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
369 (hash_insn_array): Rewrite.
370 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
371 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
372 (cgen_lookup_get_insn_operands): Ditto.
373 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
374 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
375 * po/POTFILES.in: Rebuild.
376 * po/opcodes.pot: Rebuild.
378 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
380 * Makefile.am: Rebuild dependencies.
381 (HFILES): Add fr30-opc.h.
382 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
383 * Makefile.in: Rebuild.
385 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
386 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
388 * acconfig.h: Remove.
389 * configure: Rebuild with current autoconf/automake.
390 * aclocal.m4: Likewise.
391 * config.in: Likewise.
392 * Makefile.in: Likewise.
394 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
396 * m68k-opc.c: Correct move (not movew) to status word on 5200.
398 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
400 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
401 * i386-dis.c (x_mode): Define.
405 (dis386_twobyte): Remove.
406 (dis386_twobyte_att): New.
407 (dis386_twobyte_intel): New.
408 (print_insn_x86): Use new arrays.
410 (float_mem_intel): New.
411 (float_mem_att): New.
412 (dofloat): Use new float_mem arrays.
413 (print_insn_i386_att): New.
414 (print_insn_i386_intel): New.
415 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
416 (putop): Handle intel syntax.
417 (OP_indirE): Handle intel syntax.
418 (OP_E): Handle intel syntax.
419 (OP_I): Handle intel syntax.
420 (OP_sI): Handle intel syntax.
421 (OP_OFF): Handle intel syntax.
425 1999-01-27 Doug Evans <devans@casey.cygnus.com>
427 * fr30-opc.h,fr30-opc.c: Rebuild.
428 * i960c-opc.h,i960c-opc.c: Rebuild.
429 * m32r-opc.c: Rebuild.
431 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
433 * hppa-dis.c: revert HP merge changes until HP gives us
436 1999-01-19 Nick Clifton <nickc@cygnus.com>
438 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
439 offsets as well as symbloic address.
441 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
443 * hppa-dis.c: fix comments and some indentation.
445 1999-01-12 Doug Evans <devans@casey.cygnus.com>
447 * fr30-opc.c,i960c-opc.c: Regenerate.
449 1999-01-11 Doug Evans <devans@casey.cygnus.com>
451 * fr30-opc.c: Regenerate.
453 1999-01-06 Doug Evans <devans@casey.cygnus.com>
455 * m32r-dis.c: Regenerate.
457 1999-01-05 Doug Evans <devans@casey.cygnus.com>
459 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
460 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
461 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
463 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
465 * configure.in: Require autoconf 2.12.1 or higher.
467 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
469 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
471 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
473 * fr30-opc.c: Regenerated.
475 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
477 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
479 1998-12-15 Dave Brolley <brolley@cygnus.com>
481 * fr30-opc.c,fr30-opc.h: Regenerated.
483 1998-12-14 Dave Brolley <brolley@cygnus.com>
485 * fr30-opc.c,fr30-opc.h: Regenerated.
487 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
489 * fr30-opc.c,fr30-opc.h: Regenerated.
491 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
493 * m32r-opc.c: Regenerate.
495 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
497 * dis-buf.c (generic_strcat_address): reformat to GNU coding
498 conventions. change sprintf call to an sprintf_vma call.
500 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
502 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
504 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
506 The following changes were made by
507 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
508 David Taylor <taylor@texas.cygnus.com>, and
509 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
510 merge in changes by HP; HP did not create ChangeLog entries.
512 * dis-buf.c (generic_strcat_address): new function.
514 * hppa-dis.c: Changes to improve hppa disassembly.
515 Changed formatting in : reg_names, fp_reg_names,control_reg,
516 New variables : sign_extension_names, deposit_names, conversion_names
517 float_test_names, compare_cond_names_double, add_cond_names_double,
518 logical_cond_names_double, unit_cond_names_double,
519 branch_push_pop_names, saturation_names, shift_names, mix_names,
520 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
521 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
522 (fput_const): renamed as fput_hex_const
524 - use the macros fputs_filtered and
525 fput_decimal_const whenever possible; calls to sign_extend require
526 2 params -- add a missing second param of 0.
527 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
528 architecture version number of current machine. HP folks are
529 trying to handle situation where the target program was compiled
530 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
532 - added new cases : 'g', 'B', 'm'
533 - added cases specifically for PA 2.0
534 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
535 - calls to fput_const become calls to fput_hex_const
537 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
539 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
540 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
541 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
542 * Makefile.in: Rebuilt.
543 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
545 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
546 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
548 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
550 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
552 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
554 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
556 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
557 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
559 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
561 * fr30-opc.c: Regenerate.
563 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
565 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
567 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
569 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
571 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
573 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
575 1998-11-30 Doug Evans <devans@casey.cygnus.com>
577 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
578 CGEN_INSN_BASE_VALUE.
579 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
580 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
582 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
584 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
586 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
588 * fr30-asm.c,fr30-dis.c: Regenerated.
590 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
592 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
594 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
596 * fr30-opc.c: Regenerated.
598 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
600 * fr30-opc.c: Regenerated.
601 * fr30-opc.h: Regenerated.
602 * fr30-dis.c: Regenerated.
603 * fr30-asm.c: Regenerated.
605 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
607 * mips-opc.c (sync.p,sync.l): Swap insn values.
609 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
611 * fr30-opc.c: Regenerate.
613 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
615 * fr30-opc.c: Regenerated.
616 * fr30-opc.h: Regenerated.
618 1998-11-18 Doug Evans <devans@casey.cygnus.com>
620 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
621 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
623 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
625 * fr30-opc.c: Regenerated.
627 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
629 * fr30-opc.c: Regenerated.
630 * fr30-opc.h: Regenerated.
631 * fr30-dis.c: Regenerated.
632 * fr30-asm.c: Regenerated.
634 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
636 * po/opcodes.pot: Regenerated.
637 * fr30-opc.c: Regenerated.
638 * fr30-opc.h: Regenerated.
639 * fr30-dis.c: Regenerated.
640 * fr30-asm.c: Regenerated.
642 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
644 * disassemble.c (disassembler): Add support for FR30 target.
646 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
648 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
649 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
651 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
653 * po/opcodes.pot: Regenerate.
654 * po/POTFILES.in: Regenerate.
655 * fr30-opc.c: Regenerate.
656 * fr30-opc.h: Regenerate.
658 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
660 * m32r-asm.c: Regenerate.
662 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
664 * configure.in: Added case for bfd_fr30_arch.
665 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
666 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
667 (CLEANFILES): Added stamp-fr30.
669 * fr30-asm.c: New file.
670 * fr30-dis.c: New file.
671 * fr30-opc.c: New file.
672 * fr30-opc.h: New file.
673 * po/POTFILES.in: Regenerated
674 * po/opcodes.pot: Regenerated
676 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
678 * configure.in: detect cygwin* instead of cygwin32*
679 * configure: regenerate
681 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
683 * mips-opc.c (IS_M): Added.
685 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
687 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
689 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
691 * m32r-opc.h,m32r-opc.c: Regenerate.
693 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
695 * i386-dis.c (OP_3DNowSuffix): New static function.
698 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
699 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
700 (insn_codep): New static variable.
701 (print_insn_x86): Init insn_codep after prefixes.
702 (grps): Add GRP14 entries for prefetch, prefetchw.
705 From Jeff B Epler <jepler@usgs.gov>
706 * i386-dis.c (Suffix3DNow): New table.
708 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
710 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
712 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
714 * d10v-dis.c (print_operand): If num is nonzero, then
715 add OPERAND_ACC1, not OPERAND_ACC0.
717 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
719 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
722 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
724 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
727 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
729 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
731 1998-09-09 Michael Meissner <meissner@cygnus.com>
733 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
736 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
738 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
740 (print_insn_little_arm): Detect Thumb symbols in elf object
743 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
745 * alpha-dis.c (print_insn_alpha): Use the machine type to
746 decide which PALcode set to include.
748 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
750 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
752 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
754 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
755 MSUB and MSUBS instructions.
757 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
759 * ppc-opc.c (powerpc_operands): Omit parens around additions in
762 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
764 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
765 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
766 +, -, and d for ColdFire.
768 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
769 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
770 (extract_mbe): Likewise.
772 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
774 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
776 * m10300-opc.c: First cut at UDF instructions.
778 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
780 * m32r-opc.c: Regenerate (remove semantic descriptions).
782 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
784 * arm-dis.c (print_insn_big_arm): Fix indentation.
785 (print_insn_little_arm): Likewise.
787 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
789 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
791 (print_insn_little_arm): Likewise.
793 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
795 Move all global state data into opcode table struct, and treat
796 opcode table as something that is "opened/closed".
797 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
798 (cgen_asm_init): Delete.
799 (cgen_set_parse_operand_fn): New function.
800 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
801 (cgen_dis_init): Delete.
802 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
803 (cgen_current_{opcode_table_mach,endian}): Delete.
804 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
806 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
808 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
811 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
813 * m10300-opc.c: Add entries for "no_match_operands" field in
816 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
818 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
820 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
822 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
824 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
826 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
828 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
830 (OP_J): Remove unnecessary subtraction when 16-bit displacement
831 will be masked later.
833 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
835 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
837 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
839 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
841 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
843 * m10300-dis.c: Only recognize instructions from the currently
845 * m10300-opc.c: Add field indicating the particular variant of
846 the mn10300 each instruction is available on.
848 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
850 * configure.in: For bfd_vax_arch, build vax-dis.lo.
851 * Makefile.am: Rebuild dependencies.
852 (CFILES): Add vax-dis.c.
853 (ALL_MACHINES): Add vax-dis.lo.
854 * aclocal.m4: Rebuild with current libtool.
855 * configure, Makefile.in: Rebuild.
857 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
859 * vax-dis.c: New file, from work by Pauline Middelink
860 <middelin@polyware.iaf.nl>.
861 * disassemble.c (ARCH_vax): Define if ARCH_all.
862 (disassembler): Add case for ARCH_vax.
863 * makefile.vms: Support compilation on vms/vax.
865 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
867 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
868 related to sign extension and the size of ints.
870 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
872 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
873 instructions. Support (sp) addressing mode by expanding it into
876 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
878 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
880 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
882 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
884 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
886 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
889 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
891 * mips-dis.c (print_insn_little_mips): Previously, instruction
892 printing references the symbol table to determine whether the
893 instruction resides in a block regular instructions or mips16
894 instructions. However, when the disassembler gets used in other
895 environments where the symbol table is not present, we no longer
896 rely in the symbol table, rather, use the low bit of the
897 instructions address to guess. There should be no change for usage
898 of the disassembler in host based programs, gdb, objdump.
899 (print_insn_big_mips): ditto.
900 (print_insn_mips): ditto
902 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
904 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
906 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
908 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
910 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
912 * i386-dis.c (index16): Add '%' to register names. Use ','
915 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
917 * i386-dis.c: Don't print opcode suffix when we can figure out the
918 size (and gas can!) by register operands, or from the default
920 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
922 (dis386, dis386_twobyte, grps): Use new suffix macros.
923 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
924 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
925 order of cmps operands to agree with Intel docs. Correct operand
926 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
927 agree with Intel docs.
928 (print_insn_x86): Print orphan fwait before other prefixes.
929 Return correct byte count for orphan fwait with prefixes. Don't
930 print `bound' operands in reverse order.
931 (ckprefix): Stop accumulating prefixes if we get fwait.
932 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
934 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
936 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
937 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
939 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
941 Fix problems when bfd_vma is wider than long.
942 * i386-dis.c: Make op_address and start_pc unsigned.
943 (set_op): Make parameter unsigned.
944 (print_insn_x86): Cast to bfd_vma when passing a value to
946 * ns32k-dis.c (CORE_ADDR): Don't define.
947 (print_insn_ns32k): Change type of addr to bfd_vma. Use
948 bfd_scan_vma to read back address.
949 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
951 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
952 (NEXTULONG): New definition.
953 (print_insn_m68k): Avoid overflow when computing third argument of
955 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
956 Use disp instead of val to store offset values.
957 (print_indexed): Use base_disp instead of word to store base
958 displacement, to avoid overflow.
959 * m10300-dis.c (disassemble): Cast value to long when computing
960 pc-relative address, to get correct sign extension.
962 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
964 * m32r-opc.c: Regenerate.
966 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
968 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
969 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
971 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
973 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
975 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
977 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
979 (OP_DSreg): Rename from OP_DSSI.
980 (OP_ESreg): Rename from OP_ESDI.
981 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
983 (append_seg): Rename from append_prefix.
984 (ptr_reg): New function.
985 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
987 (PREFIX_ADDR): Rename from PREFIX_ADR.
988 (float_reg): Add non-broken opcodes for people who don't want
991 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
993 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
996 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
998 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1000 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1002 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1003 0; produce error message for shifts of size 32 (or 64 for 64-bit
1004 shifts), because the hardware doesn't support them.
1006 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1008 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1009 LONG_2, LONG_2b formats to use this new operand.
1011 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1013 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1015 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1017 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1018 endian data support.
1020 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1022 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1023 and SHORT_B3b formats to use Rb instead of Ra.
1025 Add FLAG_MUL16 to MUL2XH opcode.
1027 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1028 to existing 1.1.1 parallelisation prohibition procedure.
1030 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1032 * m32r-asm.c,m32r-dis.c: Regenerate.
1034 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1036 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1037 with a shift count of 0.
1039 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1041 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1042 (cgen_hw_lookup_by_num): New function.
1044 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1046 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1048 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1050 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1051 as big-endian on SPARClite.
1053 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1055 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1057 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1059 * po/Make-in (install-info): New target.
1061 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1063 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1064 * configure: Rebuild.
1066 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1068 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1069 variety of ISA2 instructions to set bottom ten bits of trap code.
1071 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1073 * Makefile.am (config.status): Add explicit target so that
1074 config.status depends upon bfd/configure.in.
1075 * Makefile.in: Rebuild.
1077 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1079 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1080 instructions to set bottom ten bits of break code.
1081 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1082 for above optional argument.
1084 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1086 * makefile.vms: Run dec c with /nodebug.
1088 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1090 * Makefile.in: Rebuilt.
1091 * Makefile.am: Regenerated dependencies with mkdep.
1093 * opintl.h (_): Define as dgettext.
1095 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1097 * cgen-asm.c: Internationalised.
1098 * m32r-asm.c: Internationalised.
1099 * m32r-dis.c: Internationalised.
1100 * m32r-opc.c: Internationalised.
1102 * aclocal.m4: Regenerated.
1103 * configure: Regenerated.
1104 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1105 * Makefile.in: Rebuild.
1106 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1107 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1109 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1111 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1113 * aclocal.m4, configure: Rebuild with current tools.
1115 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1117 * opintl.h: New file - contains internationalisation macros used
1118 by source files in this directory.
1119 * po/: New subdirectory - contains internationalisation files.
1120 * po/Make-in: New file - Makefile constructor.
1121 * po/POTFILES.in: New file - list of files in opcodes directory
1122 that should be scan for internationalisation macros.
1123 * po/opcodes.pot: New file - list of internationisation strings
1124 found in files mentioned in po/POTFILES.in.
1125 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1126 entry. Add intl directory to include paths.
1127 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1128 HAVE_STRCPY, HAVE_LC_MESSAGES
1129 * configure.in: Add rule to build Makefile in po subdirectory.
1130 * Makefile.in: Rebuilt.
1131 * aclocal.m4: Rebuilt.
1132 * config.in: Rebuilt.
1133 * configure: Rebuilt.
1134 * alpha-opc.c: Internationalised.
1135 * arc-dis.c: Internationalised.
1136 * arc-opc.c: Internationalised.
1137 * arm-dis.c: Internationalised.
1138 * cgen-asm.c: Internationalised.
1139 * d30v-dis.c: Internationalised.
1140 * dis-buf.c: Internationalised.
1141 * h8300-dis.c: Internationalised.
1142 * h8500-dis.c: Internationalised.
1143 * i386-dis.c: Internationalised.
1144 * m10200-dis.c: Internationalised.
1145 * m10300-dis.c: Internationalised.
1146 * m68k-dis.c: Internationalised.
1147 * m88k-dis.c: Internationalised.
1148 * mips-dis.c: Internationalised.
1149 * ns32k-dis.c: Internationalised.
1150 * opintl.h: Internationalised.
1151 * ppc-opc.c: Internationalised.
1152 * sparc-dis.c: Internationalised.
1153 * v850-dis.c: Internationalised.
1154 * v850-opc.c: Internationalised.
1156 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1158 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1159 (asm_hash_table_entries): New variable.
1160 (cgen_asm_init): Free asm_hash_table_entries.
1161 (hash_insn_array,hash_insn_list): New functions.
1162 (build_asm_hash_table): Use them. Hash macro insns as well.
1163 (cgen_asm_lookup_insn): Update.
1164 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1165 (dis_hash_table_entries): New variable.
1166 (cgen_dis_init): Free dis_hash_table_entries.
1167 (hash_insn_array,hash_insn_list): New functions.
1168 (build_dis_hash_table): Use them. Hash macro insns as well.
1169 (cgen_dis_lookup_insn): Update.
1170 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1171 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1172 (cgen_macro_insn_count): New function.
1173 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1175 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1177 * i386-dis.c (OP_DSSI): Print segment override.
1179 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1181 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1184 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1186 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1187 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1188 * configure.in: Define and substitute WIN32LDFLAGS and
1190 * aclocal.m4: Rebuild with new libtool.
1191 * configure, Makefile.in: Rebuild.
1193 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1195 * m32r-opc.c: Regenerate.
1197 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1199 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1200 before trying to copy it.
1201 * Makefile.in: Rebuild.
1203 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1205 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1207 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1209 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1210 from an arbitrary valid buffer instead of fetching them on demand
1212 (invalid_float): use bit_extract_simple() instead of bit_extract().
1214 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1216 From H.J. Lu <hjl@gnu.org>:
1217 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1220 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1222 * Branched binutils 2.9.
1224 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1226 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1227 disassembling last 4 bytes of a section.
1229 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1231 Fix some gcc -Wall warnings:
1232 * arc-dis.c (print_insn): Add casts to avoid warnings.
1233 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1234 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1235 * m10200-dis.c (disassemble): Likewise.
1236 * m10300-dis.c (disassemble): Likewise.
1237 * ns32k-dis.c (print_insn_ns32k): Likewise.
1238 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1239 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1240 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1241 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1242 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1243 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1244 * tic80-dis.c (print_one_instruction): Likewise.
1245 * w65-dis.c (print_operand): Likewise.
1246 * z8k-dis.c (fetch_data): Likewise.
1247 * a29k-dis.c: Add return type for find_byte_func_type.
1248 * arc-opc.c: Include <stdio.h>. Remove declarations of
1249 insert_multshift and extract_multshift.
1250 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1252 (extract_value): Fully parenthesize expression.
1253 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1254 * h8500-opc.h (h8500_table): Fully bracket initializer.
1255 * w65-opc.h (optable): Likewise.
1256 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1257 * i386-dis.c (OP_E): Initialize local variables.
1258 * m10200-dis.c (print_insn_mn10200): Likewise.
1259 * mips-dis.c (print_insn_mips16): Likewise.
1260 * sh-dis.c (print_insn_shx): Likewise.
1261 * v850-dis.c (print_insn_v850): Likewise.
1262 * ns32k-dis.c (print_insn_arg): Declare.
1263 (get_displacement, invalid_float): Declare.
1264 (list_search, sign_extend, flip_bytes): Declare return type.
1265 (get_displacement): Likewise.
1266 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1268 (print_insn_ns32k): Make i unsigned.
1269 (invalid_float): Make static. Declare type of val.
1270 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1271 on each for iteration.
1272 * tic30-dis.c (get_indirect_operand): Likewise.
1273 * z8k-dis.c (print_insn_z8001): Declare return type.
1274 (print_insn_z8002): Likewise.
1275 (unparse_instr): Fix sprintf format strings.
1277 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1279 * mips-opc.c: Add "sync.l" and "sync.p".
1281 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1283 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1284 default m68k variant to recognize.
1286 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1287 (ctrl, cobr, mem, ea): Likewise.
1288 (print_addr): Likewise. Remove cast.
1289 (ea): Cast argument of print_addr to bfd_vma.
1291 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1293 (cgen_parse_unsigned_integer): Likewise.
1294 (cgen_parse_address): Likewise.
1296 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1298 * i960-dis.c (ctrl): Add full braces to structure initialization.
1299 (cobr, mem, reg): Likewise.
1300 (ea): Correct parenthesization in expression.
1302 * cgen-asm.c: Include <ctype.h>.
1303 (build_asm_hash_table): Remove unused local variable i.
1304 (cgen_parse_keyword): Add casts to avoid warnings.
1306 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1307 symbol. Fix indentation.
1308 (print_insn_little_arm): Likewise.
1310 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1312 * configure.in: Use AM_DISABLE_SHARED.
1313 * aclocal.m4, configure: Rebuild with libtool 1.2.
1315 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1317 These patches are courtesy of Jonathan Walton and Tony Thompson
1318 (athompso@cambridge.arm.com).
1320 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1323 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1324 both the offset and the label closest to the destination.
1326 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1328 * m32r-opc.h: Regenerate.
1330 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1332 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1334 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1336 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1337 assume that info->symbols is non-empty.
1339 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1341 * alpha-opc.c (cvtqs) There is no such thing.
1342 (cvttq): Missing most of the /*d variants.
1344 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1346 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1347 delayed branches or jumps.
1349 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1351 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1353 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1354 * tic30-dis.c (print_branch): Likewise.
1356 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1358 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1359 saved_symbol code as it is no longer needed.
1361 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1363 * cgen-asm.c: Include symcat.h.
1364 * cgen-dis.c,cgen-opc.c: Ditto.
1365 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1367 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1369 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1371 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1373 * m32r-opc.[ch]: Regenerate.
1375 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1377 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1378 arguments. Don't perform validation here.
1379 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1381 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1383 * m32r-opc.c: Regenerate.
1385 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1387 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1388 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1390 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1392 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1394 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1396 * configure.in: Get the version number from BFD.
1397 * configure: Rebuild.
1399 From H.J. Lu <hjl@gnu.org>:
1400 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1401 * Makefile.in: Rebuild.
1403 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1405 * m32r-opc.c: Regenerate.
1406 * m32r-opc.h: Regenerate.
1408 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1410 * m32r-opc.c: Regenerate.
1412 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1414 Fix rac to accept only a0:
1415 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1416 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1417 Introduce OPERAND_GPR.
1418 * d10v-dis.c (print_operand): Likewise.
1420 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1422 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1423 (cgen_hw_lookup): Make result const.
1424 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1426 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1428 * configure, aclocal.m4: Rebuild with new libtool.
1430 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1432 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1433 instructions use a PC relative branch, not absolute.
1435 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1437 * configure.in: Set libtool_enable_shared rather than
1438 libtool_shared. Remove diversion hack.
1439 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1441 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1443 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1444 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1446 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1448 * tic30-dis.c: New file.
1449 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1450 * configure.in: Handle bfd_tic30_arch.
1451 * Makefile.am: Rebuild dependencies.
1452 (CFILES): Add tic30-dis.c
1453 (ALL_MACHINES): Add tic30-dis.lo.
1454 * configure, Makefile.in: Rebuild.
1456 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1458 * m32r-opc.h (HAVE_CPU_M32R): Define.
1460 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1462 * v850-opc.c (insertion routines): If both alignment and size is
1463 wrong then report this.
1465 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1467 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1468 Only recognize instructions for the current target_processor.
1470 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1472 * d10v-dis.c (PC_MASK): Correct value.
1473 (print_operand): If there's a reloc, don't calculate the
1474 address because they could be in different sections.
1476 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1478 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1479 instruction after the 4650's "mul" instruction; nobody's using the
1480 4010 these days. If object files someday indicate which processor
1481 variant they're intended for, we can do a better job at this.
1483 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1485 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1486 table provided entry size. Use CGEN_INSN_MNEMONIC.
1487 (cgen_parse_keyword): Rewrite.
1488 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1489 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1490 * cgen-opc.c: Clean up pass over `struct foo' usage.
1491 (cgen_keyword_lookup_value): Handle "" entry.
1492 (cgen_keyword_add): Likewise.
1494 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1496 * mips-opc.c: Add FP_D to s.d instruction flags.
1498 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1500 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1502 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1504 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1505 PC relative offset forms before the 15 bit forms. An assembler command
1506 line option now chooses the default.
1508 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1510 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1511 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1513 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1515 * configure: Only build libopcodes shared if --enable-shared's value
1516 was `yes', or was set to `*opcodes*'.
1517 * aclocal.m4: Likewise.
1518 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1519 original source of this bit of code. It's not clear what the best fix
1522 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1524 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1525 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1526 offset forms before the 15 bit forms, to default to the long forms.
1528 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1530 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1532 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1534 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1535 symbol if none is present.
1536 (print_insn_big_arm): Prevent examination of stored symbol if
1539 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1541 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1543 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1545 * disassemble.c: Remove disasm_symaddr() function.
1547 * arm-dis.c: Use info->symbol instead of info->flags to determine
1548 if disassmbly should be in Thumb or Arm mode.
1550 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1552 * arm-dis.c: Add support for disassembling Thumb opcodes.
1553 (print_insn_thumb): New function.
1555 * disassemble.c (disasm_symaddr): New function.
1557 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1558 (thumb_opcodes): Table of Thumb opcodes.
1560 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1562 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1564 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1565 and 'v' as operand types.
1567 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1569 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1570 <olivier.carmona@di.epfl.ch>.
1571 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1572 which has a two word opcode with a one word argument.
1574 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1576 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1577 unsigned, not signed.
1578 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1580 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1582 * d10v-dis.c (print_operand):
1583 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1585 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1587 * d10v-opc.c (OPERAND_FLAG): Split into:
1588 (OPERAND_FFLAG, OPERAND_CFLAG) .
1592 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1594 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1595 field for all INSN_MACRO's.
1596 * mips16-opc.c: same
1598 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1600 * mips-opc.c (sync,cache): These are 3900 insns.
1602 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1604 sh-opc.h (sh_table): Remove ftst/nan.
1606 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1608 * mips-opc.c (ffc, ffs): Fix mask.
1610 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1612 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1615 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1617 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1618 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1620 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1622 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1623 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1625 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1627 * v850-dis.c (disassemble): Replace // with /* ... */
1629 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1631 * sparc-opc.c: Add wr & rd for v9a asr's.
1632 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1633 (v9a_asr_reg_names): New variable.
1634 Patch from David Miller <davem@vger.rutgers.edu>.
1636 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1638 * sparc-opc.c (v9notv9a): New insn type.
1639 (IMPDEP): Move to the end to not conflict with edge8 et al.
1640 Patch from David Miller <davem@vger.rutgers.edu>.
1642 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1644 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1646 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1648 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1650 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1652 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1653 of disassemble_info structure to determine if an overlay address
1654 has a matching symbol in low memory.
1656 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1657 new symbol_at_address_func field in disassemble_info structure.
1659 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1661 * v850-opc.c (extract_d22): Use signed arithmatic.
1663 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1665 * mips-opc.c: Three op mult is not an ISA insn.
1667 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1669 * mips-opc.c: Fix formatting.
1671 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1673 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1674 than assuming that char is signed. Explicitly sign extend 16 bit
1675 values, rather than assuming that short is 16 bits.
1676 (OP_sI, OP_J, OP_DIR): Likewise.
1678 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1680 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1683 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1685 * v850-opc.c: Fix typo in comment.
1687 * v850-dis.c (disassemble): Add test of processor type when
1688 determining opcodes.
1690 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1692 * configure.in: Use a diversion to set enable_shared before the
1693 arguments are parsed.
1694 * configure: Rebuild.
1696 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1698 * m68k-opc.c (TBL1): Use ! rather than `.
1699 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1701 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1703 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1705 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1707 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1710 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1711 * aclocal.m4: Rebuild with new libtool.
1712 * configure: Rebuild.
1714 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1716 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1718 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1720 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1722 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1724 * v850-opc.c (v850_opcodes): Further rearrangements.
1726 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1728 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1730 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1732 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1735 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1737 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1739 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1741 * v850-opc.c: Initialise processors field of v850_opcode structure.
1743 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1745 Merge changes from Martin Hunt:
1747 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1749 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1750 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1751 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1753 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1755 * d30v-dis.c (print_insn): First operand of d*i (delayed
1756 branch) instructions is relative.
1758 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1759 (d30v_operand_table): Add IMM6S3 type.
1760 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1762 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1763 and cmp instructions.
1765 * d30v-opc.c: Correct entries for repeat*, and sat*.
1766 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1767 types. Correct several formats.
1769 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1771 * d30v-opc.c (pre_defined_registers): Change control registers.
1773 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1774 SHORT_C2. Manual was incorrect.
1776 * d30v-dis.c (lookup_opcode): Return value now indicates
1777 if an opcode has a short and a long form. Used for deciding
1778 to append a ".s" or ".l".
1779 (print_insn): Append a ".s" to an instruction if it is
1780 the short form and ".l" if it is a long form. Do not append
1781 anything if the instruction has only one possible size.
1783 * d30v-opc.c: Change mulx2h to require an even register.
1784 New form: SHORT_A2; a SHORT_A form that needs an even
1785 register as the first operand.
1787 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1788 instruction was not being disassembled if there were an odd
1789 number of instructions.
1791 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1793 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1795 * v850-dis.c (disassemble): Improved display of register lists.
1797 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1799 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1800 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1801 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1802 fandnot1s, fandnot2s.
1804 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1806 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1808 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1810 * cgen-asm.c (cgen_parse_address): New argument resultp.
1811 All callers updated.
1812 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1814 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1816 * mn10200-dis.c (disassemble): PC relative instructions are
1817 relative to the next instruction, not the current instruction.
1819 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1821 * v850-dis.c (disassemble): Only signed extend values that are not
1822 returned by extract functions.
1823 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1825 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1827 * v850-opc.c: Update comments. Remove use of
1828 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1830 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1832 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1834 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1836 * configure: Rebuilt with latest devo autoconf for NT support.
1838 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1840 * v850-dis.c (disassemble): Use curly brace syntax for register
1843 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1844 where r0 is being used as a destination register.
1846 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1848 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1850 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1852 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1854 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1856 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1857 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1860 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1862 * configure (cgen_files): Add support for v850e target.
1863 * configure.in (cgen_files): Add support for v850e target.
1865 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1867 * configure (cgen_files): Add support for v850ea target.
1868 * configure.in (cgen_files): Add support for v850ea target.
1870 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1872 * configure.in (bfd_arc_arch): Add.
1873 * configure: Rebuild.
1874 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1875 * Makefile.in: Rebuild.
1876 * arc-dis.c, arc-opc.c: New files.
1877 * disassemble.c (ARCH_all): Define ARCH_arc.
1878 (disassembler): Add ARC support.
1880 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1882 * v850-dis.c (disassemble): Add support for v850EA instructions.
1884 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1885 (v850_opcodes): Add v850EA instructions.
1887 * v850-dis.c (disassemble): Add support for v850E instructions.
1889 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1890 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1891 insert_spe, extract_spe): New Functions.
1892 (v850_opcodes): Add v850E instructions.
1894 * v850-opc.c: Reorganised and re-layed out to improve readability
1897 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * configure: Rebuild with autoconf 2.12.1.
1901 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * aclocal.m4, configure: Rebuild with new automake patches.
1905 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1907 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1908 * acinclude.m4: Just include acinclude.m4 from BFD.
1909 * aclocal.m4, configure: Rebuild.
1911 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1913 * Makefile.am: New file, based on old Makefile.in.
1914 * acconfig.h: New file.
1915 * acinclude.m4: New file.
1916 * stamp-h.in: New file.
1917 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1918 Removed shared library handling; now handled by libtool. Replace
1919 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1920 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1921 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1922 handling in AC_OUTPUT.
1923 * dep-in.sed: Change .o to .lo.
1924 * Makefile.in: Now built with automake.
1925 * aclocal.m4: Now built with aclocal.
1926 * config.in, configure: Rebuild.
1928 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1930 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1932 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1934 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1936 * sparc-dis.c (sorted_opcodes): New static local.
1937 (struct opcode_hash): `opcode' is pointer to const element.
1938 (build_hash): First arg is now table of sorted pointers.
1939 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1940 (compare_opcodes): Update.
1942 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1944 * cgen-opc.c: #include <ctype.h>.
1945 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1946 Handle case insensitive hashing.
1947 (hash_keyword_value): Change type of `value' to unsigned int.
1949 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1951 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1952 precision FP, mark it as such. Likewise for double precision
1953 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1956 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1958 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1960 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1961 nesting depth when all the macros are expanded.
1963 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1965 * sparc-opc.c: The fcmp v9a instructions take an integer register
1966 as a destination, not a floating point register. From Christian
1967 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1969 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1971 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1972 syntax. From Roman Hodek
1973 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1975 * i386-dis.c (twobyte_has_modrm): Fix pand.
1977 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1979 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1981 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1983 * arm-dis.c: Add prototypes for arm_decode_shift and
1986 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1988 * mips-opc.c: Add r3900 insns.
1990 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1992 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1993 print delay slot instructions on the same line. When using a PC
1994 relative load, add a comment with the value being loaded if it can
1997 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1999 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2000 to pushS/popS for segment regs and byte constant so that
2001 pushw/popw printed when in 16 bit data mode.
2003 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2004 print cbtw, cwtd in 16 bit data mode.
2005 * i386-dis.c (putop): extra case W to support above.
2007 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2008 address size prefix in 16 bit address mode.
2010 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * sh-dis.c: Reindent. Rename local variable fprintf to
2015 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2017 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2019 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2021 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2023 * mips16-opc.c (mip16_opcodes): same.
2025 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2027 * m68k-opc.c (moveb): Change $d to %d.
2029 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2031 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2032 (twobyte_has_modrm): Likewise.
2034 (OP_MMX, OP_EM, OP_MS): New static functions.
2036 * i386-dis.c: Revert patch of April 4. The output now matches
2039 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2041 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2044 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2046 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2048 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2050 * Makefile.in (install): Depend upon installdirs.
2051 (installdirs): New target.
2053 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2055 From Thomas Graichen <graichen@rzpd.de>:
2056 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2057 * configure: Rebuild.
2059 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2061 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2062 Delete string{,s}.h support.
2064 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2066 * cgen-asm.c (cgen_parse_operand_fn): New global.
2067 (cgen_parse_{{,un}signed_integer,address}): Update call to
2068 cgen_parse_operand_fn.
2069 (cgen_init_parse_operand): New function.
2070 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2071 from cgen_asm_init_parse.
2072 (m32r_cgen_assemble_insn): New operand `errmsg'.
2073 Delete call to as_bad, return error message to caller.
2074 (m32r_cgen_asm_hash_keywords): #if 0 out.
2076 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2078 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2080 [case 'J']: Fix typo in register name.
2082 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2084 * configure.in: Substitute SHLIB_LIBS.
2085 * configure: Rebuild.
2086 * Makefile.in (SHLIB_LIBS): New variable.
2087 ($(SHLIB)): Use $(SHLIB_LIBS).
2089 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2093 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2095 * disassemble.c (disassembler): Handle m32r.
2097 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2099 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2100 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2101 * Makefile.in (CFILES): Add them.
2102 (ALL_MACHINES): Add them.
2103 (dependencies): Regenerate.
2104 * configure.in (cgen_files): New variable.
2105 (bfd_m32r_arch): Add entry.
2106 * configure: Regenerate.
2108 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2110 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2111 * configure: Rebuild.
2113 * Makefile.in: Rebuild dependencies.
2115 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2117 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2120 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * Branched binutils 2.8.
2124 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2126 * m10200-dis.c: Rename from mn10200-dis.c.
2127 * m10200-opc.c: Rename from mn10200-opc.c.
2128 * m10300-dis.c: Rename from mn10300-dis.c
2129 * m10300-opc.c: Rename from mn10300-opc.c.
2130 * Makefile.in: Update accordingly.
2132 * mips16-opc.c: Add mul and dmul macros.
2134 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2136 * makefile.vms: Update CFLAGS, add clean target.
2138 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2140 * mips-opc.c: Add "wait". From Ralf Baechle
2141 <ralf@gnu.ai.mit.edu>.
2143 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2144 * configure, config.in: Rebuild.
2145 * sysdep.h: Include <stdlib.h> if it exists.
2146 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2148 * Makefile.in: Rebuild dependencies.
2150 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2152 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2153 Andrew Bray <andy@madhouse.demon.co.uk>.
2155 * mips-opc.c: Add cast when setting mips_opcodes.
2157 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2159 * v850-dis.c (disassemble): Fix sign extension problem.
2160 * v850-opc.c (extract_d*): Fix sign extension problems to make
2161 disassembly calculate branch offsets correctly.
2163 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2165 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2167 * mips-opc.c: Add dctr and dctw.
2169 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2171 * d30v-dis.c (print_insn): Change the way signed constants
2174 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2176 * Makefile.in (BFD_H): New variable.
2177 (HFILES): New variable.
2178 (CFILES): Add all C files.
2179 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2180 Delete old dependencies, and build new ones.
2181 * dep-in.sed: New file.
2183 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2185 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2187 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2189 * mn10200-opc.c: Change "trap" to "syscall".
2190 * mn10300-opc.c: Add new "syscall" instruction.
2192 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2194 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2195 mulul insns on the coldfire.
2197 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2200 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2201 (print_insn_little_arm): Likewise.
2203 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2205 Based on patches from H.J. Lu <hjl@lucon.org>:
2206 * i386-dis.c (fetch_data): Add prototype.
2207 * m68k-dis.c (fetch_data): Add prototype.
2208 (dummy_print_address): Add prototype. Make static.
2209 * ppc-opc.c (valid_bo): Add prototype.
2210 * sparc-dis.c (build_hash_table): Add prototype.
2211 (is_delayed_branch, compute_arch_mask): Add prototypes.
2212 (print_insn_sparc): Make several local variables const.
2213 (compare_opcodes): Change arguments to const PTR. Add prototype.
2214 * sparc-opc.c (arg): Change name field to be const.
2215 (lookup_name, lookup_value): Add prototypes. Change table and
2216 name parameters to be const.
2217 (sparc_encode_asi): Change name parameter to be const.
2218 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2219 (sparc_encode_sparclet_cpreg): Likewise.
2220 (sparc_decode_asi): Change return type to be const.
2221 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2222 (sparc_decode_sparclet_cpreg): Likewise.
2224 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2226 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2227 Solaris doesn't like the combined options, and the -f is
2229 (stamp-tshlink, install): Likewise.
2231 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2233 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2236 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2238 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2240 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2242 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2245 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2247 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2249 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2251 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2253 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2255 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2257 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2259 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2260 floatformat_to_double to make portable.
2261 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2264 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2266 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2267 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2269 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2271 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2272 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2274 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2276 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2277 (OFF_SL_BR_SCALED): ... to this, and added the flag
2278 TIC80_OPERAND_BASEREL to the flags word.
2279 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2282 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2284 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2285 Change mips_opcodes from const array to a pointer,
2286 and change bfd_mips_num_opcodes from const int to int,
2287 so that we can increase the size of the mips opcodes table
2290 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2292 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2293 store BITNUM values in the table in one's complement form
2294 to match behavior when assembler is given a raw numeric
2295 value for a BITNUM operand.
2296 * tic80-dis.c (print_operand_bitnum): Ditto.
2298 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2300 * d30v-opc.c: Removed references to FLAG_X.
2302 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2304 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2306 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2308 * Makefile.in: Added d30v object files.
2309 * configure: (bfd_d30v_arch) Rebuilt.
2310 * configure.in: (bfd_d30v_arch) Added new case.
2311 * d30v-dis.c: New file.
2312 * d30v-opc.c: New file.
2313 * disassemble.c (disassembler) Add entry for d30v.
2315 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2317 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2318 representations for the floating point BITNUM values.
2320 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2322 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2323 in the table in one's complement form, as they appear in the
2325 (tic80_symbol_to_value): Use macros to access predefined
2327 (tic80_value_to_symbol): Ditto.
2328 (tic80_next_predefined_symbol): New function.
2329 * tic80-dis.c (print_operand_bitnum): Remove code that did
2330 one's complement for BITNUM values.
2332 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2334 * makefile.vms: Remove 8 bit characters. Update to latest
2337 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2339 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2341 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2343 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2344 (IMM24_PCREL): Likewise.
2346 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2348 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2349 address for an extended PC relative instruction that is not a
2352 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2354 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2357 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2359 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2360 (tic80_opcodes): Sort entries so that long immediate forms
2361 come after short immediate forms, making it easier for
2362 assembler to select the right one for a given operand.
2364 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2366 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2368 (print_insn_mips16): Likewise.
2370 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2372 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2373 a symbol class that restricts translation to just that
2374 class (general register, condition code, etc).
2376 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2378 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2379 and REG_DEST_E for register operands that have to be
2380 an even numbered register. Add REG_FPA for operands that
2381 are one of the floating point accumulator registers.
2382 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2383 (tic80_opcodes): Change entries that need even numbered
2384 register operands to use the new operand table entries.
2385 Add "or" entries that are identical to "or.tt" entries.
2387 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2389 * mips16-opc.c: Add new cases of exit instruction for
2391 * mips-dis.c (print_mips16_insn_arg): Display floating point
2392 registers in operands of exit instruction. Print `$' before
2393 register names in operands of entry and exit instructions.
2395 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2397 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2398 pairs for all predefined symbols recognized by the assembler.
2399 Also used by the disassembling routines.
2400 (tic80_symbol_to_value): New function.
2401 (tic80_value_to_symbol): New function.
2402 * tic80-dis.c (print_operand_control_register,
2403 print_operand_condition_code, print_operand_bitnum):
2404 Remove private tables and use tic80_value_to_symbol function.
2406 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2408 * d10v-dis.c (print_operand): Change address printing
2409 to correctly handle PC wrapping. Fixes PR11490.
2411 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2413 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2416 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2418 * mips-dis.c (print_insn_mips16): Set insn_info information.
2419 (print_mips16_insn_arg): Likewise.
2421 * mips-dis.c (print_insn_mips16): Better handling of an extend
2422 opcode followed by an instruction which can not be extended.
2424 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2426 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2427 coldfire moveb instruction to not allow an address register as
2428 destination. Although the documentation does not indicate that
2429 this is invalid, experiments uncovered unexpected behavior.
2430 Added a comment explaining the situation. Thanks to Andreas
2431 Schwab for pointing this out to me.
2433 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2435 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2436 entries are presorted so that entries with the same mnemonic are
2437 adjacent to each other in the table. Sort the entries for each
2438 instruction so that this is true.
2440 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2442 * m68k-dis.c: Include <libiberty.h>.
2443 (print_insn_m68k): Sort the opcode table on the most significant
2444 nibble of the opcode.
2446 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2448 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2449 "vsub", "vst", "xnor", and "xor" instructions.
2450 (V_a1): Renamed from V_a, msb of accumulator reg number.
2451 (V_a0): Add macro, lsb of accumulator reg number.
2453 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2455 * tic80-dis.c (print_insn_tic80): Broke excessively long
2456 function up into several smaller ones and arranged for
2457 the instruction printing function to be callable recursively
2458 to print vector instructions that have both a load and a
2459 math instruction packed into a single opcode.
2460 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2461 to explain why it comes after the other vector opcodes.
2463 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2465 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2466 move insns to handle immediate operands.
2468 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2470 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2471 fix operand mask in the "moveml" entries for the coldfire.
2473 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2475 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2476 New macros for building vector instruction opcodes.
2477 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2478 FMT_LI, which were unused. The field is now a flags field.
2479 Remove some opcodes that are possible, but illegal, such
2480 as long immediate instructions with doubles for immediate
2481 values. Add "vadd" and "vld" instructions.
2483 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2485 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2486 the order more logical. Move the shift alias instructions ("rotl",
2487 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2488 interspersed with the regular sr.x and sl.x instructions. Add
2489 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2490 "sub", "subu", "swcr", and "trap".
2492 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2494 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2495 (OFF_SL_PC): Renamed from OFF_SL.
2496 (OFF_SS_BR): New operand type for base relative operand.
2497 (OFF_SL_BR): New operand type for base relative operand.
2498 (REG_BASE): New operand type for base register operand.
2499 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2500 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2501 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2503 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2504 10 char field, padded with spaces on rhs, rather than a string
2505 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2506 than old TIC80_OPERAND_RELATIVE. Add support for new
2507 TIC80_OPERAND_BASEREL flag bit.
2509 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2511 * tic80-dis.c (print_insn_tic80): Print floating point operands
2513 * tic80-opc.c (SPFI): Add single precision floating point
2514 immediate operand type.
2515 (ROTATE): Add rotate operand type for shifts.
2516 (ENDMASK): Add for shifts.
2517 (n): Macro for the 'n' bit.
2518 (i): Macro for the 'i' bit.
2519 (PD): Macro for the 'PD' field.
2520 (P2): Macro for the 'P2' field.
2521 (P1): Macro for the 'P1' field.
2522 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2525 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2527 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2528 adding in current address for pc-relative operands.
2530 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2532 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2533 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2534 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2535 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2536 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2537 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2538 (REG_SCALED, LSI_SCALED): New operand types.
2539 (E): New macro for 'E' bit at bit 27.
2540 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2541 opcodes, including the various size flavors (b,h,w,d) for
2542 the direct load and store instructions.
2544 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2546 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2548 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2549 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2550 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2551 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2552 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2553 masks with "MASK_* & ~M_*" to get the M bit reset.
2554 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2556 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2558 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2559 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2560 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2562 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2563 CC, SICR, and LICR table entries.
2564 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2565 "bcnd", and "brcr" opcodes.
2567 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2569 * ppc-opc.c (powerpc_operands): Make comment match the
2570 actual fields (no shift field).
2571 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2572 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2573 partial implementation, work in progress.
2574 * tic80-opc.c (tic80_operands): Begin construction operands table.
2575 (tic80_opcodes): Continue populating opcodes table and start
2576 filling in the operand indices.
2577 (tic80_num_opcodes): Add this.
2579 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2581 * m68k-opc.c: Add #B case for moveq.
2583 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2585 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2586 before they are used.
2588 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2590 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2591 for "breakpoint" instruction.
2593 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2595 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2596 (dep): Use ALL_CFLAGS rather than CFLAGS.
2598 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2600 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2603 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2605 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2606 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2608 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2610 * mips16-opc.c: Add "abs".
2612 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2614 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2615 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2616 (disassembler): Add bfd_arch_tic80 support to set disassemble
2617 to print_insn_tic80.
2618 * tic80-dis.c (print_insn_tic80): Add stub.
2620 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2622 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2623 * configure: Regenerate with autoconf.
2624 * tic80-dis.c: Add file.
2625 * tic80-opc.c: Add file.
2627 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2629 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2631 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2633 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2634 (mn10200_opcodes): Use it for some logicals and btst insns.
2635 Add "break" and "trap" instructions.
2637 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2639 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2641 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2643 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2644 relative load or add now depends upon whether the instruction is
2647 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10200-dis.c: Finish writing disassembler.
2650 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2651 Fix mask for "jmp (an)".
2653 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2654 handle endianness issues for mn10300.
2656 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2658 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2660 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2661 instruction. Fix opcode field for "movb (imm24),dn".
2663 * mn10200-opc.c (mn10200_operands): Fix insertion position
2666 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2668 * mn10200-opc.c: Create mn10200 opcode table.
2669 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2670 but moving along nicely.
2672 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2674 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2676 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2678 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2679 specifiers for fmovem* instructions.
2681 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2683 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2685 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2687 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2690 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2692 * mn10300-opc.c: Add some comments explaining the various
2695 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2697 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2699 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2702 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2703 operand specifiers in fmovm* instructions.
2705 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2707 * ppc-opc.c (insert_li): Give an error if the offset has the two
2708 least significant bits set.
2710 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2712 * mips-dis.c (print_insn_mips16): Separate the instruction from
2713 the arguments with a tab, not a space.
2715 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2717 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2720 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2723 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2725 * configure: Rebuild with autoconf 2.12.
2727 Add support for mips16 (16 bit MIPS implementation):
2728 * mips16-opc.c: New file.
2729 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2730 (mips16_reg_names): New static array.
2731 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2732 after seeing a 16 bit symbol.
2733 (print_insn_little_mips): Likewise.
2734 (print_insn_mips16): New static function.
2735 (print_mips16_insn_arg): New static function.
2736 * mips-opc.c: Add jalx instruction.
2737 * Makefile.in (mips16-opc.o): New target.
2738 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2739 * configure: Rebuild.
2741 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2743 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2744 operand specifiers in *save, *restore and movem* instructions.
2746 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2749 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2750 register operands for immediate arithmetic, not, neg, negx, and
2751 set according to condition instructions.
2753 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2754 specifier of the effective-address operand in immediate forms of
2755 arithmetic instructions. The specifier for the immediate operand
2756 notes how and where the constant will be stored.
2758 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2760 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2763 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2766 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2768 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2770 * mn10300-dis.c (disassemble): Handle register lists.
2772 * mn10300-opc.c: Fix handling of register list operand for
2773 "call", "ret", and "rets" instructions.
2775 * mn10300-dis.c (disassemble): Print PC-relative and memory
2776 addresses symbolically if possible.
2777 * mn10300-opc.c: Distinguish between absolute memory addresses,
2778 pc-relative offsets & random immediates.
2780 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2782 (disassemble): Handle SPLIT and EXTENDED operands.
2784 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2786 * mn10300-dis.c: Rough cut at printing some operands.
2788 * mn10300-dis.c: Start working on disassembler support.
2789 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2791 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2793 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2795 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2797 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2799 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2801 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2802 register argument is calls and jmp instructions.
2804 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2806 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2807 getx operand. Fix opcode for mulqu imm,dn.
2809 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2811 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2812 in MN10300_OPERAND_SPLIT operands for how many bits
2813 appear in the basic insn word. Add IMM32_HIGH24,
2814 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2815 (mn10300_opcodes): Use new operands as needed.
2817 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2818 for bset, bclr, btst instructions.
2819 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2821 * mn10300-opc.c (mn10300_operands): Remove many redundant
2822 operands. Update opcode table as appropriate.
2823 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2824 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2826 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2828 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2829 operands (for indexed load/stores). Fix bitpos for DI
2830 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2831 few instructions that insert immediates/displacements in the
2832 middle of the instruction. Add IMM8E for 8 bit immediate in
2833 the extended part of an instruction.
2834 (mn10300_operands): Use new opcodes as appropriate.
2836 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2838 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2839 sequential so the assembler never parallelizes it with
2842 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2844 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2845 a data/address register that appears in register field 0
2846 and register field 1.
2847 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2849 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2851 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2852 standard disassembly.
2854 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2855 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2856 Recategorize PALcode instructions.
2858 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2860 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2862 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2864 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2865 there are no operand types.
2867 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2869 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2871 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2873 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2875 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2877 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2879 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2880 and sst.w instructions.
2882 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2885 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2887 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2890 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2892 * ppc-opc.c (PPCPWR2): Define.
2893 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2896 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2898 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2899 field for movhu instruction.
2901 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2902 cast value to "long" not "signed long" to keep hpux10
2905 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2907 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2910 * mn10300-opc.c (FMT*): Remove definitions.
2912 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2913 for shift-by-register opcodes.
2915 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2916 into [AD][MN][01] for encoding the position of the register
2919 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2921 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2922 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2924 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2926 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2927 Fix various typos. Add "PAREN" operand.
2928 (MEM, MEM2): Define.
2929 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2930 operands. Fix several typos.
2932 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2935 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2937 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2938 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2940 (mn10300_opcodes): Break opcode format out into its own field.
2941 Update many operand fields to deal with signed vs unsigned
2942 issues. Fix one or two typos in the "mov" instruction
2943 opcode, mask and/or operand fields.
2945 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2947 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2948 m68851 wasn't reset.
2950 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2952 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2953 all opcodes. Very rough cut at operands for all opcodes.
2955 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2958 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10200-opc.c, mn10300-opc.c: New files.
2961 * mn10200-dis.c, mn10300-dis.c: New files.
2962 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2963 * disassemble.c: Break mn10x00 support into 10200 and 10300
2965 * configure.in: Likewise.
2966 * configure: Rebuilt.
2968 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2970 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2972 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2974 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2976 * disassemble (ARCH_mn10x00): Define.
2977 (disassembler): Handle bfd_arch_mn10x00.
2978 * configure.in: Recognize bfd_mn10x00_arch.
2979 * configure: Rebuilt.
2981 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2983 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2984 accordingly. Don't declare functions using op_rtn.
2986 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2988 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2989 params to be more standard.
2990 * (disassemble): Print absolute addresses and symbolic names for
2991 branch and jump targets.
2992 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2994 * (v850_opcodes): Add breakpoint insn.
2996 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2998 * m68k-opc.c: Move the fmovemx data register cases before the
2999 other cases, so that they get recognized before the data register
3000 does gets treated as a degenerate register list.
3002 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * mips-opc.c: Add a case for "div" and "divu" with two registers
3005 and a destination of $0.
3007 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3009 * mips-dis.c (print_insn_arg): Add prototype.
3010 (_print_insn_mips): Ditto.
3012 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3014 * mips-dis.c (print_insn_arg): Print condition code registers as
3017 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3019 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3021 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3023 * v850-dis.c (disassemble): Make static. Provide prototype.
3025 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3027 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3030 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3032 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3033 ']' characters into the output stream.
3034 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3035 Add "memop" field to all opcodes (for the disassembler).
3036 Reorder opcodes so that "nop" comes before "mov" and "jr"
3037 comes before "jarl".
3039 * v850-dis.c (print_insn_v850): Fix typo in last change.
3041 * v850-dis.c (print_insn_v850): Properly handle disassembling
3042 a two byte insn at the end of a memory region when the memory
3043 region's size is only two byte aligned.
3045 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3047 * v850-dis.c (v850_reg_names): Define.
3048 (v850_sreg_names, v850_cc_names): Likewise.
3049 (disassemble): Very rough cut at printing operands (unformatted).
3051 * v850-opc.c (BOP_MASK): Fix.
3052 (v850_opcodes): Fix mask for jarl and jr.
3054 * v850-dis.c: New file. Skeleton for disassembler support.
3055 * Makefile.in Remove v850 references, they're not needed here.
3056 * configure.in: Add v850-dis.o when building v850 toolchains.
3057 * configure: Rebuilt.
3058 * disassemble.c (disassembler): Call v850 disassembler.
3060 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3061 (insert_d8_6, extract_d8_6): New functions.
3062 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3063 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3065 (IF4A, IF4B): Use "D7" instead of "D7S".
3066 (IF4C, IF4D): Use "D8_7" instead of "D8".
3067 (IF4E, IF4F): New. Use "D8_6".
3068 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3069 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3071 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3072 (v850_operands): Change D16 to D16_15, use special insert/extract
3073 routines. New new D16 that uses the generic insert/extract code.
3074 (IF7A, IF7B): Use D16_15.
3075 (IF7C, IF7D): New. Use D16.
3076 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3078 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3079 message. Issue an error if the branch offset is odd.
3081 * v850-opc.c: Add notes about needing special insert/extract
3082 for all the load/store insns, except "ld.b" and "st.b".
3084 * v850-opc.c (insert_d22, extract_d22): New functions.
3085 (v850_operands): Use insert_d22 and extract_d22 for
3087 (insert_d9): Fix range check.
3089 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3091 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3092 and set bits field to D9 and D22 operands.
3094 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-opc.c (v850_operands): Define SR2 operand.
3097 (v850_opcodes): "ldsr" uses R1,SR2.
3099 * v850-opc.c (v850_opcodes): Fix opcode specs for
3100 sld.w, sst.b, sst.h, sst.w, and nop.
3102 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3104 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3105 end of the opcode table.
3107 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3109 * d10v-opc.c (pre_defined_registers): Added register pairs,
3110 "r0-r1", "r2-r3", etc.
3112 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3114 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3115 Create I16U for an unsigned 16bit mmediate operand.
3116 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3118 * v850-opc.c (v850_operands): Define EP operand.
3119 (IF4A, IF4B, IF4C, IF4D): Use EP.
3121 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3122 with immediate operand, "movhi". Tweak "ldsr".
3124 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3125 correct. Get sld.[bhw] and sst.[bhw] closer.
3127 * v850-opc.c (v850_operands): "not" is a two byte insn
3129 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3131 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3133 * v850-opc.c (two): Get order of words correct.
3135 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3137 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3138 register source and destination operands.
3139 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3141 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3142 same thinko in "trap" opcode.
3144 * v850-opc.c (v850_opcodes): Add initializer for size field
3147 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3148 Add D8 for 8-bit unsigned field in short load/store insns.
3149 (IF4A, IF4D): These both need two registers.
3150 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3151 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3152 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3153 for "ldsr" and "stsr".
3154 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3157 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3158 short store word (sst.w).
3160 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3162 * v850-opc.c (v850_operands): Added insert and extract fields,
3163 pointers to functions that handle unusual operand encodings.
3165 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3167 * v850-opc.c (v850_opcodes): Enable "trap".
3169 * v850-opc.c (v850_opcodes): Fix order of displacement
3170 and register for "set1", "clr1", "not1", and "tst1".
3172 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3174 * v850-opc.c (v850_operands): Add "B3" support.
3175 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3178 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3180 * v850-opc.c: Close unterminated comment.
3182 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3184 * v850-opc.c (v850_operands): Add flags field.
3185 (v850_opcodes): add move opcodes.
3187 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3189 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3190 * configure: (bfd_v850v_arch) Add new case.
3191 * configure.in: (bfd_v850_arch) Add new case.
3192 * v850-opc.c: New file.
3194 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3196 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3198 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3200 * d10v-opc.c: Add additional information to the opcode
3201 table to help determinine which instructions can be done
3204 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3206 * mpw-make.sed: Update editing of include pathnames to be
3209 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3211 * arm-opc.h: Added "bx" instruction definition.
3213 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3215 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3217 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3219 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3221 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3223 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3225 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3227 * makefile.vms: Update for alpha-opc changes.
3229 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * i386-dis.c (print_insn_i386): Actually return the correct value.
3232 (ONE, OP_ONE): #ifdef out; not used.
3234 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3236 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3237 Changed subi operand type to treat 0 as 16.
3239 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3241 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3244 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3246 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3247 memory transfer instructions. Add new format string entries %h and %s.
3248 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3251 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3253 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3254 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3256 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3258 * alpha-dis.c (print_insn_alpha_osf): Remove.
3259 (print_insn_alpha_vms): Remove.
3260 (print_insn_alpha): Make globally visible. Chose the register
3261 names based on info->flavour.
3262 * disassemble.c: Always return print_insn_alpha for the alpha.
3264 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3266 * d10v-dis.c (dis_long): Handle unknown opcodes.
3268 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3270 * d10v-opc.c: Changes to support signed and unsigned numbers.
3271 All instructions with the same name that have long and short forms
3272 now end in ".l" or ".s". Divs added.
3273 * d10v-dis.c: Changes to support signed and unsigned numbers.
3275 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3277 * d10v-dis.c: Change all functions to use info->print_address_func.
3279 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3281 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3282 move ccr/sr insns more strict so that the disassembler only
3283 selects them when the addressing mode is data register.
3285 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3286 * d10v-opc.c (pre_defined_registers): Declare.
3287 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3288 to pick a better name for the registers.
3290 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3292 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3293 operands for fexpand and fpmerge. From Christian Kuehnke
3294 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3296 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3298 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3299 print routine. Take new regnames and cpumask arguments.
3300 Kill the environment variable nonsense.
3301 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3302 (print_insn_alpha_vms): New function. Do VMS style regnames.
3303 * disassemble.c (disassembler): Test bfd flavour to pick
3304 between OSF and VMS routines. Default to OSF.
3306 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3308 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3309 * configure: Rebuild.
3310 * Makefile.in (install): Use @INSTALL_SHLIB@.
3312 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3314 * configure: (bfd_d10v_arch) Add new case.
3315 * configure.in: (bfd_d10v_arch) Add new case.
3316 * d10v-dis.c: New file.
3317 * d10v-opc.c: New file.
3318 * disassemble.c (disassembler) Add entry for d10v.
3320 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3322 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3323 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3325 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3327 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3328 distinguish between variants of the instruction set.
3329 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3330 distinguish between variants of the instruction set.
3332 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3334 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3335 the 8086 instruction set.
3336 * i386-dis.c: General cleanups. Make most things static. Add
3337 prototypes. Get rid of static variables aflags and dflags. Pass
3338 them as args (to almost everything).
3340 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3342 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3344 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3346 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3347 if the next arg is marked with SRC_IN_DST. Gross.
3349 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3350 we're looking for and find EXR.
3352 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3353 if we're looking for KBIT and we don't find it.
3355 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3358 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3359 3bit immediate operands.
3361 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3363 * Released binutils 2.7.
3365 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3366 <kkaempf@progis.ac-net.de>.
3368 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3370 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3372 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3374 * sparc-dis.c (print_insn_sparclite): New routine to print
3375 sparclite instructions.
3377 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3379 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3381 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3383 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3384 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3385 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3387 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3389 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3390 Use autoconf-set values.
3391 (docdir, oldincludedir): Removed.
3392 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3394 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3396 * alpha-opc.c: New file.
3397 * alpha-opc.h: Remove.
3398 * alpha-dis.c: Complete rewrite to use new opcode table.
3399 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3400 * configure: Rebuild with autoconf 2.10.
3401 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3402 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3404 (alpha-opc.o): New target.
3406 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3408 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3409 Set imm_added_to_rs1 even if the source and destination register
3412 * sparc-opc.c: Add some two operand forms of the wr instruction.
3414 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3416 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3419 * disassemble.c (disassembler): Handle H8/S.
3420 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3422 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * sparc-opc.c: Add beq/teq as aliases for be/te.
3426 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3427 <sergei@msil.sps.mot.com>.
3429 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3431 * makefile.vms: New file.
3433 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3435 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3437 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3440 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3442 * i386-dis.c (OP_OFF): Call append_prefix.
3444 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3446 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3447 unsigned long to silence a warning from the Solaris PowerPC
3450 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3452 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3454 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3456 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3458 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3459 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3460 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3461 cpush, cpusha, cpull sparclet insns.
3463 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3465 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3467 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3469 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3470 Set F_FLOAT on other floating point instructions.
3472 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3474 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3476 (powerpc_opcodes): Add 860/821 specific SPRs.
3478 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3480 * configure.in: Permit --enable-shared to specify a list of
3481 directories. Set and substitute BFD_PICLIST.
3482 * configure: Rebuild.
3483 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3484 uses. Set to @BFD_PICLIST@.
3486 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3488 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3489 not "abs", which may be needed for the absolute in something
3490 like btst #0,@10:8. Print L_3 immediates separately from other
3491 immediates. Change ABSMOV reference to ABS8MEM.
3493 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3495 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3496 (current_arch_mask): New static global.
3497 (compute_arch_mask): New static function.
3498 (print_insn_sparc): Delete sparc_v9_p. New static local
3499 current_mach. Resort opcode table if current_mach changes.
3500 Generalize "insn not supported" test.
3501 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3502 Delete test for v9/!v9.
3503 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3505 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3506 (brfcx): Renamed to FBRX.
3507 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3508 coprocessor mnemonics are not supported on the sparclet).
3509 (condf): Renamed to CONDF.
3510 (SLCBCC2): Delete F_ALIAS flag.
3512 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3514 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3515 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3517 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3519 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3520 that the shared library version number is set correctly.
3522 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3524 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3525 Miles Bader <miles@gnu.ai.mit.edu>.
3526 * configure: Rebuild.
3528 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3530 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3533 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3535 * configure: Rebuild with autoconf 2.8.
3537 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3539 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3540 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3542 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3544 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3545 since they appear as targets in Makefile.in.
3546 * configure: Rebuild.
3548 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3550 * mpw-make.sed: Edit out shared library support bits.
3552 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3554 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3555 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3556 (sparc_opcodes): Add sparclet insns.
3557 (sparclet_cpreg_table): New static local.
3558 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3559 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3561 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3563 * i386-dis.c (index16): New static variable.
3564 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3566 (OP_indirE): Return result of OP_E.
3567 (OP_E): Check for 16 bit addressing mode, and disassemble
3568 correctly. Optimised 32 bit case a little. Don't print
3569 "(base,index,scale)" when sib specifies only an offset.
3571 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3573 * configure.in: Set and substitute SHLIB_DEP.
3574 * configure: Rebuild.
3575 * Makefile.in (SHLIB_DEP): New variable.
3576 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3577 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3578 COMMON_SHLIB, add them to piclist with appropriate modifications.
3579 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3580 here: just use piclist.
3582 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3584 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3585 (print_insn_sparc): Rewrite v9/not-v9 tests.
3586 (compare_opcodes): Likewise.
3587 * sparc-opc.c (MASK_<ARCH>): Define.
3588 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3589 (sparclet,v6notv9): Define.
3590 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3591 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3593 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * configure.in: Call AC_PROG_CC before configure.host.
3596 * configure: Rebuild.
3598 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3600 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3602 * i386-dis.c (onebyte_has_modrm): New static array.
3603 (twobyte_has_modrm): New static array.
3604 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3606 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3608 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3611 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3613 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3616 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3618 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3619 m68010up, not just m68020up | cpu32.
3621 * Makefile.in (SONAME): New variable.
3622 ($(SHLINK)): Make a link to the transformed name, as well.
3623 (stamp-tshlink): New target.
3624 (install): Skip stamp-tshlink during install.
3626 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3628 * configure.in: Call AC_ARG_PROGRAM.
3629 * configure: Rebuild.
3630 * Makefile.in (program_transform_name): New variable.
3631 (install): Transform library name before installing it.
3633 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3635 * i960-dis.c (mem): Add HX dcinva instruction.
3637 Support for building as a shared library, based on patches from
3638 Alan Modra <alan@spri.levels.unisa.edu.au>:
3639 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3640 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3641 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3642 * configure: Rebuild.
3643 * Makefile.in (ALLLIBS): New variable.
3644 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3645 (COMMON_SHLIB, SHLINK): New variables.
3646 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3647 (STAGESTUFF): Remove variable.
3648 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3649 (stamp-piclist, piclist): New targets.
3650 ($(SHLIB), $(SHLINK)): New targets.
3651 ($(OFILES)): Depend upon stamp-picdir.
3652 (disassemble.o): Build twice if PICFLAG is set.
3653 (MOSTLYCLEAN): Add pic/*.o.
3654 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3655 (distclean): Remove pic and stamp-picdir.
3656 (install): Install shared libraries.
3657 (stamp-picdir): New target.
3659 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3661 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3662 Print unknown instruction as "unknown", rather than in hex.
3664 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3666 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3668 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3670 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3672 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3674 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3675 when necessary. From Ulrich Drepper
3676 <drepper@myware.rz.uni-karlsruhe.de>.
3678 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3680 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3681 sparc_num_opcodes. Update architecture enum values.
3682 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3683 (sparc_opcode_lookup_arch): New function.
3684 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3685 (sparc_opcodes): Add v9a shutdown insn.
3687 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3689 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3690 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3692 (print_insn_sparc64): Deleted.
3693 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3696 * sparc-opc.c (architecture_pname): Add v9a.
3698 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3700 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3701 incorrectly defined as 0x16 when it should be 0x15.
3702 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3703 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3704 excb (exception barrier) which is defined in the Alpha
3705 Architecture Handbook version 2.
3706 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3707 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3708 disassembled as or, for example.
3710 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3712 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3713 (_print_insn_mips): Change i from int to unsigned int.
3715 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3717 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3718 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3720 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3722 * i386-dis.c: Added Pentium Pro instructions.
3724 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3726 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3729 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3731 * sh-opc.h (sh_nibble_type): Added REG_B.
3732 (sh_arg_type): Added A_REG_B.
3733 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3735 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3737 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3739 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3741 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3743 * Makefile.in (distclean): Remove stamp-h. From Ronald
3744 F. Guilmette <rfg@monkeys.com>.
3746 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3748 From David Mosberger-Tang <davidm@azstarnet.com>:
3749 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3752 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3754 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3755 (sh_table): Added many SH3 opcodes.
3756 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3758 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3760 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3761 (subco,subco.): Mark this PPC, not PPCCOM.
3763 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * configure: Rebuild with autoconf 2.7.
3767 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3769 * configure: Rebuild with autoconf 2.6.
3771 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3773 * configure.in: Sort list of architectures. Accept but do nothing
3774 for alliant, convex, pyramid, romp, and tahoe.
3776 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3778 * a29k-dis.c (print_special): Change num to unsigned int.
3780 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3782 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3785 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3787 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3788 * configure: Rebuilt.
3790 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3792 * configure.in: Add case for bfd_i860_arch.
3793 * configure: Rebuild.
3795 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3797 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3798 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3799 (NEXTDOUBLE): Likewise.
3800 (print_insn_m68k): Don't match fmoveml if there is more than one
3801 register in the list.
3802 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3804 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3806 * m68k-opc.c: Use #W rather than #w.
3807 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3809 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3811 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3812 and likewise for all the dbxx opcodes.
3814 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3816 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3818 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3820 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3821 the VR4100 specific instructions to the mips_opcodes structure.
3823 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3825 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3826 ugly Metrowerks bug in CW6, is fixed in CW7.
3828 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3830 * ppc-opc.c (whole file): Add flags for common/any support.
3832 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3834 * Makefile.in (BISON): Remove macro.
3835 (FLAGS_TO_PASS): Remove BISON.
3837 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3839 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3841 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3842 instructions that take no args by looking at the match mask.
3843 (print_insn_arg): Always print "%" before register names.
3844 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3845 [case '_']: Don't print "@#" before address.
3846 [case 'J']: Use "%s" as format string, not register name.
3847 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3849 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3851 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3854 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3856 From David Mosberger-Tang <davidm@azstarnet.com>
3858 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3859 (alpha_insn_set): added definitions for VAX floating point
3860 instructions (Unix compilers don't generate these, but handcoded
3861 assembly might still use them).
3863 * alpha-dis.c (print_insn_alpha): added support for disassembling
3864 the miscellaneous instructions in the Alpha instruction set.
3866 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3868 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3869 no longer create sysdep.h, sed ppc-opc.c to work around a
3870 serious Metrowerks C bug.
3871 * mpw-make.in: Remove.
3872 * mpw-make.sed: New file, used by mpw-configure to edit
3873 Makefile.in into an MPW makefile.
3875 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3877 * Makefile.in (maintainer-clean): New synonym for realclean.
3879 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3881 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3882 which use '0', '1', and '2' instead. Specify the proper size for
3883 a pmove immediate operand. Correct the pmovefd patterns to be
3884 moves to a register, not from a register.
3885 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3887 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3889 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3890 %psr, %wim, %tbr as F_NOTV9.
3892 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3894 * Makefile.in (Makefile): Just rebuild Makefile when running
3896 (config.h, stamp-h): New targets.
3897 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3898 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3899 rebuilding config.h.
3900 * configure: Rebuild.
3902 * mips-opc.c: Change unaligned loads and stores with "t,A"
3903 operands to use "t,A(b)".
3905 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3907 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3909 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3911 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3912 until 3 instead of until 2.
3914 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3916 * Makefile.in (ALL_CFLAGS): Define.
3917 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3918 (MOSTLYCLEAN): Add config.log.
3919 (distclean): Don't remove config.log.
3920 * configure.in: Substitute HDEFINES.
3921 * configure: Rebuild.
3923 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3925 * sh-opc.h (sh_arg_type): Add F_FR0.
3926 (sh_table, case fmac): Add F_FR0 as first argument.
3928 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3930 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3932 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3934 * sparc-dis.c: Remove all references to NO_V9.
3936 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3938 * aclocal.m4: Just include ../bfd/aclocal.m4.
3939 * configure: Rebuild.
3941 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3943 * sparc-dis.c (X_DISP19): Define.
3944 (print_insn, case 'G'): Use it.
3945 (print_insn, case 'L'): Sign extend displacement.
3947 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3949 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3950 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3951 host_makefile_frag or frags.
3952 * aclocal.m4: New file.
3953 * configure: Rebuild.
3954 * Makefile.in (INSTALL): Set to @INSTALL@.
3955 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3956 (INSTALL_DATA): Set to @INSTALL_DATA@.
3958 (AR_FLAGS): Set to rc rather than qc.
3959 (CC): Define as @CC@.
3960 (CFLAGS): Set to @CFLAGS@.
3961 (@host_makefile_frag@): Remove.
3962 (config.status): Remove dependency upon @frags@.
3964 * configure.in: ../bfd/config.bfd now just sets shell variables.
3965 Use them rather than looking through target Makefile fragments.
3966 * configure: Rebuild.
3968 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3970 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3972 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3974 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3975 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3978 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3979 (lookup_{name,value}): New functions.
3980 (prefetch_table): New static local.
3981 (sparc_{encode,decode}_prefetch): New functions.
3982 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3984 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3986 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3989 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3991 * sh-dis.c: Correct comment on first line of file.
3993 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3995 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3997 * sparc-opc.c (asi, membar): New static locals.
3998 (sparc_{encode,decode}_{asi,membar}): New functions.
3999 (sparc_opcodes, membar insn): Fix.
4000 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4001 Support decoding of membar masks.
4004 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4006 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4008 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4010 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4011 and likewise for the other branches. Add bhs as an alias for bcc,
4012 and likewise for the size variants. Add dbhs as an alias for
4015 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4017 * sh-opc.h (FP sts instructions): Update to match reality.
4019 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4021 * m68k-dis.c: (fpcr_names): Add % before all register names.
4022 (reg_names): Likewise.
4023 (print_insn_arg): Don't explicitly print % before register names.
4024 Add % before register names in static array names. In case 'r',
4025 print data registers as `@(Dn)', not `Dn@'. When printing a
4026 memory address, don't print @# before it.
4027 (print_indexed): Change base_disp and outer_disp from int to
4028 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4029 syntax. Sign extend 8 byte displacement correctly.
4030 (print_base): Print using MIT syntax. Print zpc when appropriate.
4031 Change parameter disp from int to bfd_vma.
4033 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4036 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4038 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4039 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4040 * sh-opc.h (sh_arg_type): Add new operand types.
4041 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4043 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4045 * Makefile.in (distclean): Remove generated file config.h.
4047 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4049 * Makefile.in (distclean): Remove generated file config.h.
4051 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4053 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4055 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4057 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4058 rather than numopcodes. Use m68k_opcodes rather than removed
4059 opcode function. Don't check F_ALIAS.
4060 (print_insn_arg): Change first parameter to be const char *.
4061 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4062 (m68k-opc.o): New target.
4063 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4064 * configure: Rebuild.
4066 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4068 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4069 (opcode_bits, opcode_hash_table): New variables.
4070 (opcodes_initialized): Renamed from opcodes_sorted.
4071 (build_hash_table): New function.
4072 (is_delayed_branch): Use hash table.
4073 (print_insn): Renamed from print_insn_sparc, made static.
4074 Build and use hash table. If !sparc64, ignore sparc64 insns,
4075 and vice-versa if sparc64.
4076 (print_insn_sparc, print_insn_sparc64): New functions.
4077 (compare_opcodes): Move sparc64 opcodes to end.
4078 Print commutative insns with constant second.
4079 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4081 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4083 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4084 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4085 avoids printing a delay slot in a delay slot.
4086 * sh-opc.h (sh_table): Fully bracket last entry.
4088 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4090 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4092 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4094 * configure.in: Get host_makefile_frag from ${srcdir}.
4096 * configure.in: Autoconfiscated. Check for string[s].h. Create
4097 config.h from config.in. Don't set up sysdep.h link.
4098 * sysdep.h: New file.
4099 * configure, config.in: New files, generated from configure.in.
4100 * Makefile.in: Updated to be processed autoconf-style.
4101 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4102 (Makefile): Depend on config.status.
4103 (config.status): New rule.
4104 * configure.bat: Update Makefile substitutions.
4106 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4108 * mips-opc.c (L1): Define.
4109 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4110 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4113 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4115 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4116 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4117 have multiple add units but only a single logical unit.
4119 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4120 shifted by 18, without any insertion or extraction function.
4121 (insert_cr, extract_cr): Remove.
4123 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4125 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4128 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4130 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4131 * sh-opc.h: Add copyright.
4133 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4135 * Makefile.in (crunch-m68k): Delete extra target accidentally
4136 checked in a while ago.
4138 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4140 * sh-opc.h (sh_table): Add SH3 support.
4142 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4144 * sh-opc.h: Added bsrf and braf.
4146 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4148 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4149 bogus [ls]fm{ea,fd} patterns.
4151 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4152 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4153 initialize it from memory. Make function static.
4154 (print_insn_{big,little}_arm): New functions.
4155 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4156 the correct endianness.
4158 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4160 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4163 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4165 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4166 17th, so that it builds again using GCC as the compiler.
4168 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4170 * mips-dis.c (print_insn_little_mips): Cast return value from
4171 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4172 expects an unsigned long, and that might be fewer words of
4173 argument storage (e.g., if bfd_vma is long long on a 32-bit
4175 (print_insn_big_mips): Likewise with bfd_getb32 value.
4176 (_print_insn_mips): Now static.
4178 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4180 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4181 gcc memory hog problem with initializer is fixed.
4183 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4185 Merge in support for Mac MPW as a host.
4186 (Old change descriptions retained for informational value.)
4188 * mpw-config.in (archname): Compute from the config.
4189 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4191 * mpw-config.in (target_arch): Compute from canonical target.
4192 (m68k, mips, powerpc, sparc): Add architectures.
4193 * mpw-make.in (disassemble.c.o): Add.
4194 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4196 * mpw-config.in (BFD_MACHINES): Set to a default value.
4197 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4199 * mpw-make.in (CSEARCH): Add extra-include to search path.
4201 * mpw-config.in (varargs.h): Don't create.
4202 (sysdep.h): Create using forward-include.
4203 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4205 * mpw-config.in: New file, MPW version of configure.in.
4206 * mpw-make.in: New file, MPW version of Makefile.in.
4208 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4210 * alpha-dis.c (print_insn_alpha): Put empty statement after
4213 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4215 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4216 (low_sign_extend): Likewise.
4217 (get_field): Delete unused function.
4218 (set_field, deposit_14, deposit_21): Likewise.
4220 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4222 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4225 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4227 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4229 * alpha-opc.h (OSF_ASMCODE): define
4230 print pal-code names as defined in App C of the
4231 Alpha Architecture Reference Manual
4233 * alpha-dis.c: cleaned up output
4234 print stylized code forms as defined in App A.4.3 of the
4235 Alpha Architecture Reference Manual
4237 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4239 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4241 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4244 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4246 * m68k-dis.c (opcode): New function. Returns address of opcode
4247 table entry given index, even if the opcode table was split to
4248 work around gcc bugs.
4249 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4251 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4252 (reg_names): Now const.
4253 (print_insn_arg): Arrays cacheFieldName and names now const.
4254 (print_indexed): Array scales now const.
4256 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4258 * ppc-opc.c: Sort recently added instructions by minor opcode
4259 number within major opcode number.
4261 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4263 * hppa-dis.c: Include libhppa.h.
4265 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4267 * mips-opc.c: Change dli to use M_DLI, and add dla.
4269 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4271 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4273 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * mips-opc.c: Add r4650 mul instruction.
4277 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4279 * mips-opc.c: Add uld and usd macros for unaligned double load and
4282 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4284 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4285 mfdcr, mtdcr, icbt, iccci.
4287 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4289 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4290 signed char fields to shorts, more portable.
4292 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4294 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4295 char fields as signed chars, since they may have negative values.
4297 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4299 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4300 (mycroft@netbsd.org).
4302 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4304 From "Logg, Ed" <elogg@ea.com>:
4305 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4306 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4309 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4311 * ppc-opc.c: Changes based on patch from David Edelsohn
4312 <edelsohn@mhpcc.edu>.
4313 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4316 (insert_tbr): New static function.
4317 (extract_tbr): New static function.
4318 (XFXFXM_MASK, XFXM): Define.
4319 (XSPRBAT_MASK, XSPRG_MASK): Define.
4320 (powerpc_opcodes): Add instructions to access special registers by
4321 name. Add mtcr and mftbu.
4323 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4325 * mips-opc.c (P3): Define.
4326 (mips_opcodes): Add mad and madu.
4328 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4330 * configure.in: Add W65 support.
4331 * disassemble.c: Likewise.
4332 * w65-opc.h, w65-dis.c: New files.
4334 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4336 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4339 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4341 * mips-opc.c: Add dli as a synonym for li.
4343 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4345 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4346 print something for reserved opcode values, even if it won't
4349 * mips-dis.c (_print_insn_mips): When initializing, shift right
4350 and mask, to avoid sign extension problems on the Alpha.
4352 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4355 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4357 * sh-opc.h (mov.l gbr): Get direction right.
4358 * sh-dis.c (print_insn_shx): New function.
4359 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4360 print opcodes with right byte order.
4362 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4364 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4365 to avoid conflicts with getopt.
4367 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4369 * hppa-dis.c (print_insn_hppa): Read the instruction using
4370 bfd_getb32, so that it works on a little endian or 64 bit host.
4371 Remove unused local variable op.
4373 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4375 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4376 addu does not work correctly if -mips3.
4378 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4380 * a29k-dis.c (print_special): Add special register names defined
4381 on 29030, 29040 and 29050.
4382 (print_insn): Handle new operand type 'I'.
4384 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4386 * Makefile.in (INSTALL): Use top level install.sh script.
4388 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4390 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4391 that it works on a little endian host.
4393 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4395 * configure.in: Use ${config_shell} when running config.bfd.
4397 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4399 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4401 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4403 * a29k-dis.c (print_insn): Print the opcode.
4405 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4407 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4409 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4411 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4413 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4415 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4416 which store a value into memory.
4418 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4420 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4421 * arm-dis.c, arm-opc.h: New files.
4423 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4425 * Makefile.in (ns32k-dis.o): Add dependency.
4426 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4427 string, not as array of chars.
4429 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4431 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4433 * sparc-opc.c: Added sparclite extended FP operations, and
4434 versions of v9 impdep* instructions permitting specification of
4437 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4439 * i960-dis.c (reg_names): Now const.
4440 (struct sparse_tabent): New type, copied from array type in mem
4442 (ctrl): Local static array ctrl_tab now const.
4443 (cobr): Local static array cobr_tab now const.
4444 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4445 static variable mem_tab no longer explicitly initialized. Changed
4446 mem_init to const array of struct sparse_tabent.
4447 (reg): Local static variable reg_tab no longer explicitly
4448 initialized. Changed reg_init to const array of struct
4450 (ea): Local static array scale_tab now const.
4452 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4455 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4457 * configure.bat: the disassember needs to be enabled for
4458 "objdump -d" to work in djgpp.
4460 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4462 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4463 (invalid_float): Enabled general version, doesn't require running
4464 on ns32k host. Changed to take char* argument, and test for
4465 explicitly specified sizes, instead of using sizeof() on host CPU
4467 (INVALID_FLOAT): Cast first argument.
4468 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4469 list_P032, list_M032): Now const.
4470 (optlist, list_search): Made appropriate arguments now point to
4472 (print_insn_arg): Changed static array of one-character-string
4473 pointers into a static const array of characters; fixed sprintf
4474 statement accordingly.
4476 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4478 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4479 from distribution. A ns32k-dis.c from a previous distribution has
4480 been brought up to date and supports the new interface.
4482 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4484 * configure.in: add bfd_ns32k_arch target support.
4486 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4487 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4489 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4491 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4494 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4496 * h8300-dis.c, mips-dis.c: Don't use true and false.
4498 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4500 * configure.in: Change --with-targets to --enable-targets.
4502 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4504 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4505 opcodes to the first instruction with that opcode, to speed
4506 disassembly of large files. From ralphc@pyramid.com (Ralph
4509 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4511 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4513 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4515 * configure.bat: update to latest makefile.in
4517 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4519 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4520 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4521 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4522 slot insn is in a delay slot.
4523 * z8k-opc.h: (resflg): Fix patterns.
4524 * h8500-opc.h Fix CR insn patterns.
4526 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4528 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4529 "cmpl" before POWER versions, so that gas -many uses them.
4531 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4533 * disassemble.c: New file.
4534 * Makefile.in (OFILES): Add disassemble.o.
4535 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4536 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4537 binutils/configure.in.
4539 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4540 opcode being examined.
4542 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4544 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4545 (insert_ral, insert_ram, insert_ras): New functions.
4546 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4547 RAS for store with update.
4549 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4551 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4552 (edelsohn@npac.syr.edu).
4554 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4556 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4559 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4561 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4563 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * ppc-opc.c (powerpc_operands): The signedp field has been
4566 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4567 instead. Add new operand SISIGNOPT.
4568 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4569 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4570 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4573 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4575 * i386-dis.c (struct private): Renamed to dis_private. `private'
4576 is a reserved word for dynix cc.
4578 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4580 * configure.in: Change error message to refer to bfd/config.bfd
4581 rather than bfd/configure.in.
4583 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4585 * ppc-opc.c: Define POWER2 as short alias flag.
4586 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4589 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4591 * i960-dis.c (print_insn_i960): Don't read a second word for
4592 opcodes 0, 1, 2 and 3.
4594 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4598 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4600 * m68881-ext.c: Removed; no longer used.
4601 * Makefile.in: Changed accordingly.
4603 * m68k-dis.c (ext_format_68881): Don't declare.
4604 (print_insn_m68k): If an instruction uses place 'i', it uses at
4605 least four fixed bytes.
4606 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4607 extended float, convert to double using floatformat_to_double, not
4608 ieee_extended_to_double, and fetch the data before converting it.
4610 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4613 davidj@ICSI.Berkeley.EDU (David Johnson).
4615 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4617 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4618 PowerPC uses bdnz[l][a].
4620 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4622 * dis-buf.c, i386-dis.c: Include sysdep.h.
4624 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4626 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4628 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4629 by Motorola PowerPC 601 with PPC_OPCODE_601.
4630 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4631 Disassemble Motorola PowerPC 601 instructions as well as normal
4632 PowerPC instructions.
4634 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4636 * i960-dis.c (reg, mem): Just use a static array instead of
4639 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4641 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4642 condition name index if this is for a negated condition.
4644 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4645 Floating point format for 'H' operand is backwards from normal
4646 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4647 operands (fmpyadd and fmpysub), handle bizarre register
4648 translation correctly for single precision format.
4650 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4651 or 'I' operands if the next format specifier is 'M' (fcmp
4652 condition completer).
4654 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4656 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4657 single number giving a bitmask for the MB and ME fields of an M
4658 form instruction. Change NB to accept 32, and turn it into 0;
4659 also turn 0 into 32 when disassembling. Seperated SH from NB.
4660 (insert_mbe, extract_mbe): New functions.
4661 (insert_nb, extract_nb): New functions.
4662 (SC_MASK): Mask out SA and LK bits.
4663 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4664 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4665 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4666 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4667 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4668 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4669 (powerpc_macros): Define table of macro definitions.
4670 (powerpc_num_macros): Define.
4672 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4673 if PPC_OPERAND_NEXT is set.
4675 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4677 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4678 char. Retrieve contents using bfd_getl32 instead of shifting.
4680 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4682 * ppc-opc.c: New file. Opcode table for PowerPC, including
4683 opcodes for POWER (RS/6000).
4684 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4685 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4686 (CFILES): Add ppc-dis.c.
4687 (ppc-dis.o, ppc-opc.o): New targets.
4688 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4690 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4692 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4693 No space before 'u', 'f', or 'N'.
4695 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4697 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4698 farther than we should.
4700 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4702 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4704 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4706 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4708 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4709 needs it, to prevent reading past the end of a section.
4711 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4714 Removed t,A case for la; always use t,A(b) case.
4716 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4718 From Ted Lemen <mellon@pepper.ncd.com>
4719 * mips-dis.c (print_insn_arg): Handle 'k'.
4720 * mips-opc.c: Make cache use k, not t.
4722 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4724 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4725 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4726 FLOAT_FORMAT_CODE to put out floating point register names.
4728 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4730 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4732 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4736 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4739 larger than 32. Moved dsxx32 variants first for disassembler.
4741 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4743 * z8kgen.c, z8k-opc.h: Add full lda information.
4745 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4747 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4748 movb instructions. Any necessary space will be emitted by
4749 the code to handle nullification completers.
4751 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4753 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4755 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4757 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4758 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4760 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4762 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4764 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4766 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4767 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4769 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4771 * m88k-dis.c (m88kdis): comment change. Remove space after
4773 (printop): handle new arg types DEC and XREG for m88110.
4775 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4777 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4778 type for absolute branch addresses. Delete special
4779 "ble" and "be" code in 'W' operand code.
4781 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * mips-opc.c: Set hazard information correctly for branch
4784 likely instructions.
4786 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4788 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4789 info->fprintf_func for printing and info->print_address_func for
4792 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4794 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4796 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4798 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4799 Corrected second case of "b" for disassembler.
4801 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4804 to BFD swapping routines to correspond to BFD name changes.
4806 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4808 * mips-opc.c: Change div machine instruction to be z,s,t rather
4809 than s,t. Change div macro to be d,v,t rather than d,s,t.
4810 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4811 rem and remu which generates only the corresponding div
4812 instruction. This is for compatibility with the MIPS assembler,
4813 which only generates the simple machine instruction when an
4814 explicit destination of $0 is used.
4815 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4817 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4819 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4820 WR_31 hazard for bal, bgezal, bltzal.
4822 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4824 * hppa-dis.c (print_insn_hppa): Use print function
4825 from within the disassemble_info, not fprintf_filtered.
4827 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4829 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4830 Law, law@cs.utah.edu.)
4832 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * mips-opc.c ("absu"): Removed.
4837 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4840 Changed hazard information to distinguish between memory load
4841 delays and coprocessor load delays.
4843 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4847 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4849 * configure.in: Don't pass cpu to config.bfd.
4851 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * m88k-dis.c (m88kdis): Make class unsigned.
4855 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4857 * alpha-dis.c (print_insn_alpha): One branch format case was
4858 missing the instruction name.
4860 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4862 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4863 Add the arch-specific auxiliary files.
4864 (OFILES): Remove the arch-specific auxiliary files
4865 and use BFD_MACHINES instead of DIS_LIBS.
4866 * configure.in: Set BFD_MACHINES based on --with-targets option.
4868 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4873 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4875 * sparc-opc.c: Change CONST to const to deal with gcc
4876 -Dconst=__const -traditional.
4878 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4880 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4881 coprocessor instructions out of #if 0, and made them use new
4884 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4886 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4888 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4890 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4891 instruction, for use by the disassembler.
4893 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4894 hand-coded sign extensions that depended on 32-bit host ints.
4895 FIXME, we still depend on big-endian host bitfield ordering.
4896 (sparc_print_insn): Set the insn_info_valid field, and the
4897 other fields that describe the instruction being printed.
4899 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4901 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4902 `jmp' instead of just one of them.
4904 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4906 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4907 (fput_fp_reg_r): Renamed from fput_reg_r.
4908 (fput_fp_reg): New function.
4909 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4911 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4913 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4915 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4917 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4919 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4920 don't output a space.
4922 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4924 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4926 * mips-opc.c: New file, containing opcode table from
4927 ../include/opcode/mips.h.
4928 * Makefile.in: Add it.
4930 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4932 * m88k-dis.c: New file, moved in from gdb and changed to use the
4933 new dis-asm.h disassembler interface.
4934 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4935 (m88k-dis.o): New target.
4937 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4939 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4940 argument string const char * to correspond to opcode/mips.h.
4942 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4944 * mips-dis.c: Updated to account for name changes in new version
4946 * Makefile.in: Added header file dependencies.
4948 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4950 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4952 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4954 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4955 extend, rather than shifts.
4957 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4959 * Makefile.in: Undo 15 June change.
4961 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4963 * m68k-dis.c (print_insn_arg): Change return value to byte count
4965 * m68k-dis.c: Re-write to detect invalid operands before
4966 printing anything, so we can handle this the same way we
4967 handle invalid opcodes.
4969 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4971 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4973 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4975 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4978 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4980 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4982 * configure.in: Do make sysdep.h link.
4983 * Makefile.in: Search ../include. Don't search ../bfd.
4985 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4987 Changes from Jeff Law, law@cs.utah.edu:
4988 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4989 Do not print a space before the completers specified by
4992 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4994 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4995 defined, since gdb has been fixed.
4997 Changes from Jeff Law, law@cs.utah.edu:
4998 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4999 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5000 be a *disassemble_info, not a *FILE.
5001 * hppa-dis.c: Support 'd', '!', and 'a'.
5002 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5003 * hppa-dis.c: Delete cases which are no longer needed.
5005 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5007 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5009 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5011 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5014 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5016 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5017 * configure.in: No longer need to configure to get sysdep.h.
5019 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5021 * Patches from Jeffrey Law <law@cs.utah.edu>.
5022 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5023 templates for 1.1 FP computational instructions.
5025 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5027 * h8500-dis.c (print_insn_h8500): Address argument is type
5029 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5032 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5033 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5035 * sparc-dis.c (compare_opcodes): Move static declaration to
5038 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5040 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5041 instruction, remove unimp hack from 'l' argument.
5043 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5045 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5048 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5050 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5051 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5054 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5056 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5057 arrays of string pointers to 2-d arrays of chars, to save
5060 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5062 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5063 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5065 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5067 * hppa-dis.c: New file from Utah, adapted to new disassembler
5069 * Makefile.in: Include it.
5071 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5073 * sh-dis.c, sh-opc.h: New files.
5075 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5077 * alpha-dis.c, alpha-opc.h: New files.
5079 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5081 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5084 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5086 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5088 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5090 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5093 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5095 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5096 and double percent signs a few places.
5098 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5100 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5101 Use info->print_address_func not print_address.
5103 * dis-buf.c (generic_print_address): New function.
5105 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5107 * Makefile.in: Add sparc-dis.c.
5108 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5110 Add `add' instruction to the set that get checked
5111 for a preceding `sethi' in order to print an absolute address.
5112 * (print_insn): Disassembly prefers real instructions.
5113 (is_delayed_branch): Speed up.
5114 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5115 Still missing some float ops, and needs testing.
5116 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5117 F_ALIAS. Use printf, not fprintf, when not passing a file
5119 (compare_opcodes): Check that identical instructions have
5120 identical opcodes, complain otherwise.
5123 * Include reg_names.
5125 Use dis-asm.h/read_memory_func interface.
5127 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5129 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5130 deliberately return non-zero to setjmp from longjmp. Otherwise
5131 this code fails to compile.
5133 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5135 * m68k-dis.c: Fix prototype for fetch_arg().
5137 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5139 * dis-buf.c: New file, for new read_memory_func interface.
5140 Makefile.in (OFILES): Include it.
5141 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5142 Use new read_memory_func interface.
5144 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5146 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5147 * h8500-opc.h: Fix couple of opcodes.
5149 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5151 * Makefile.in: add dvi & installcheck targets
5153 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5155 * Makefile.in: Update for h8500-dis.c.
5157 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5159 * h8500-dis.c, h8500-opc.h: New files
5161 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5163 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5164 ../include/dis-asm.h.
5165 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5166 and ../gdb/m68k-pinsn.c).
5167 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5168 and ../gdb/i386-pinsn.c).
5169 * m68881-ext.c: New file. Moved definition of
5170 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5171 * Makefile.in: Adjust for new files.
5172 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5173 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5174 can be dis-assembled.
5176 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5178 * mips-dis.c (print_insn_arg): Now returns void.
5180 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5182 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5183 files that use the macros.
5185 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5187 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5188 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5189 (CFILES): Added mips-dis.c.
5191 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5193 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5194 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5196 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5198 * Makefile.in: Improve *clean rules.
5199 * configure.in: Allow a default host.
5201 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5203 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5204 files include other sysdep files
5206 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5208 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5210 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5212 * configure.in: For host support, use ../bfd/configure.host
5213 so it stays in sync with the ../bfd/hosts database.
5215 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5217 * configure.in: use cpu-vendor-os triple instead of nested cases
5219 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5221 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5222 *always* the wrong one.
5224 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5226 * z8kgen.c: added copyright info
5228 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5230 * z8k-dis.c (unparse_instr): prettier tabs
5231 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5233 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5235 * configure.in: Add ncr* configuration.
5236 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5237 picayune ANSI compilers happy.
5239 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5241 * configure.in (i386): Make i386 and i486 synonymous for now.
5242 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5244 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5246 * Makefile.in (install): Fix typo.
5248 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5250 * Makefile.in (make): Remove obsolete crud.
5251 (sparc-opc.o): Avoid Sun Make VPATH bug.
5253 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5255 * Makefile.in: since there are no SUBDIRS, remove rule and
5256 references of subdir_do.
5258 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5260 * Makefile.in (install): Get the library name right here too.
5261 Don't install bfd.h, since it's unrelated to this library. No
5262 subdirs to recurse into, either.
5263 (CFILES): The source file has a .c suffix, not .o.
5265 * sparc-opc.c: New file, moved from BFD.
5266 * Makefile.in (OFILES): Build it.
5268 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5270 * z8k-dis.c: fixed forward refferences of some declarations.
5272 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5274 * Makefile.in: get the name of the library right
5276 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5278 * z8k-dis.c: knows how to disassemble z8k stuff
5279 * z8k-opc.h: new file full of z8000 opcodes
5283 version-control: never
projects / external / binutils.git / blob