1 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
3 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
6 * m68k-dis.c (fetch_arg): Add places `n', `o'.
8 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
9 Add mcf5206e to appropriate instructions.
10 Add alias for MAC, MSAC.
12 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
15 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
16 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
18 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
20 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
22 * i386-dis.c (Ed): Define.
23 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
25 (OP_rm): Rename to OP_Rd.
28 (putop): Add const to template and p.
29 (print_insn_x86): Delete.
30 (print_insn_i386): Merge old function print_insn_x86. Add const
32 (struct dis386): Add const to name.
33 (dis386_att, dis386_intel): Add const.
34 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
35 (names32, names16, names8, names_seg, index16): Add const.
36 (grps, prefix_user_table, float_reg): Add const.
37 (float_mem_att, float_mem_intel): Add const.
38 (oappend): Add const to s.
39 (OP_REG): Add const to s.
40 (ptr_reg): Add const to s.
41 (dofloat): Add const to dp.
42 (OP_C): Don't skip modrm, it's now done in OP_Rd.
45 (OP_Rd): Check for valid mod. Call Op_E to print.
46 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
47 (OP_MS): Check for valid mod. Call Op_EM to print.
48 (OP_3DNowSuffix): Set obufp and use oappend rather than
49 strcat. Call BadOp() for errors.
50 (OP_SIMD_Suffix): Likewise.
51 (BadOp): New function.
53 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
55 * i386-dis.c (dis386_intel): Remove macro chars, except for
56 jEcxz. Change cWtR and cRtd to cW and cR.
57 (dis386_twobyte_intel): Remove macro chars here too.
58 (putop): Handle R and W macros for intel mode.
60 * i386-dis.c (SIMD_Fixup): New function.
61 (dis386_twobyte_att): Use it on movlps and movhps, and change
62 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
63 (dis386_twobyte_intel): Same here.
65 * i386-dis.c (Av): Remove.
69 (OP_SIMD_Suffix): New function.
70 (OP_DIR): Remove dead code.
71 (eAX_reg..eDI_reg): Renumber.
72 (onebyte_has_modrm): Table numbering comments.
73 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
74 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
75 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
76 and handle SIMD cmp insns in OP_SIMD_Suffix.
77 (info->bytes_per_line): Bump from 5 to 6.
79 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
80 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
82 PIII SIMD support from Doug Ledford <dledford@redhat.com>
83 * i386-dis.c (XM, EX, None): Define.
84 (OP_XMM, OP_EX, OP_None): New functions.
85 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
86 (GRP14): Rename to GRPAMD.
87 (GRP*): Add USE_GROUPS flag.
89 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
90 (twobyte_has_modrm): Add SIMD entries.
91 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
92 (grps): Add SIMD insns.
93 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
94 oappend repz if uses_f3_prefix. Add code to handle new groups for
97 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
98 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
99 operand from Av to Jv.
101 1999-05-07 Nick Clifton <nickc@cygnus.com>
103 * mcore-dis.c (print_insn_mcore): Use .short to display
104 unidentified instructions, not .word.
106 1999-04-26 Tom Tromey <tromey@cygnus.com>
108 * aclocal.m4, configure: Updated for new version of libtool.
110 1999-04-14 Doug Evans <devans@casey.cygnus.com>
112 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
113 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
115 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
117 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
120 1999-04-10 Doug Evans <devans@casey.cygnus.com>
122 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
123 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
125 1999-04-06 Ian Lance Taylor <ian@zembu.com>
127 * opintl.h (LC_MESSAGES): Never define.
129 1999-04-04 Ian Lance Taylor <ian@zembu.com>
131 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
132 (separator_char, scale_char): Likewise.
133 (print_insn_x86): Likewise.
134 (print_insn_i386): Likewise. Add declaration.
136 1999-03-26 Doug Evans <devans@casey.cygnus.com>
138 * fr30-dis.c: Rebuild.
139 * m32r-dis.c: Rebuild.
141 1999-03-23 Ian Lance Taylor <ian@zembu.com>
143 * m68k-opc.c: Change compare instructions to use "@s" rather than
144 ";s" when used with an immediate operand.
146 1999-03-22 Doug Evans <devans@casey.cygnus.com>
148 * cgen-opc.c (cgen_set_cpu): Delete.
149 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
150 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
152 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
154 * po/opcodes.pot: Rebuild.
156 1999-03-16 Martin Hunt <hunt@cygnus.com>
158 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
160 1999-03-11 Doug Evans <devans@casey.cygnus.com>
162 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
163 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
164 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
165 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
166 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
167 * m32r-opinst.c: Rebuild.
169 1999-02-25 Doug Evans <devans@casey.cygnus.com>
171 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
172 (cgen_hw_lookup_by_num): Rewrite.
173 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
174 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
175 * m32r-opinst.c: Rebuild.
177 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
179 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
180 (insert_jhint): Fix insertion mask.
181 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
183 1999-02-10 Doug Evans <devans@casey.cygnus.com>
185 * Makefile.in: Rebuild.
187 1999-02-09 Doug Evans <devans@casey.cygnus.com>
189 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
190 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
191 * Makefile.am: Remove references to them.
192 (HFILES): Add fr30-desc.h,m32r-desc.h.
193 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
195 (ALL_MACHINES): Update.
196 * configure.in: Redo handling of cgen_files.
197 (bfd_i960_arch): Delete i960c-*.lo files.
198 * configure: Regenerate.
199 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
200 (hash_insn_array): Rewrite.
201 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
202 (hash_insn_array): Rewrite.
203 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
204 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
205 (cgen_lookup_get_insn_operands): Ditto.
206 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
207 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
208 * po/POTFILES.in: Rebuild.
209 * po/opcodes.pot: Rebuild.
211 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
213 * Makefile.am: Rebuild dependencies.
214 (HFILES): Add fr30-opc.h.
215 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
216 * Makefile.in: Rebuild.
218 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
219 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
221 * acconfig.h: Remove.
222 * configure: Rebuild with current autoconf/automake.
223 * aclocal.m4: Likewise.
224 * config.in: Likewise.
225 * Makefile.in: Likewise.
227 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
229 * m68k-opc.c: Correct move (not movew) to status word on 5200.
231 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
233 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
234 * i386-dis.c (x_mode): Define.
238 (dis386_twobyte): Remove.
239 (dis386_twobyte_att): New.
240 (dis386_twobyte_intel): New.
241 (print_insn_x86): Use new arrays.
243 (float_mem_intel): New.
244 (float_mem_att): New.
245 (dofloat): Use new float_mem arrays.
246 (print_insn_i386_att): New.
247 (print_insn_i386_intel): New.
248 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
249 (putop): Handle intel syntax.
250 (OP_indirE): Handle intel syntax.
251 (OP_E): Handle intel syntax.
252 (OP_I): Handle intel syntax.
253 (OP_sI): Handle intel syntax.
254 (OP_OFF): Handle intel syntax.
258 1999-01-27 Doug Evans <devans@casey.cygnus.com>
260 * fr30-opc.h,fr30-opc.c: Rebuild.
261 * i960c-opc.h,i960c-opc.c: Rebuild.
262 * m32r-opc.c: Rebuild.
264 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
266 * hppa-dis.c: revert HP merge changes until HP gives us
269 1999-01-19 Nick Clifton <nickc@cygnus.com>
271 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
272 offsets as well as symbloic address.
274 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
276 * hppa-dis.c: fix comments and some indentation.
278 1999-01-12 Doug Evans <devans@casey.cygnus.com>
280 * fr30-opc.c,i960c-opc.c: Regenerate.
282 1999-01-11 Doug Evans <devans@casey.cygnus.com>
284 * fr30-opc.c: Regenerate.
286 1999-01-06 Doug Evans <devans@casey.cygnus.com>
288 * m32r-dis.c: Regenerate.
290 1999-01-05 Doug Evans <devans@casey.cygnus.com>
292 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
293 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
294 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
296 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
298 * configure.in: Require autoconf 2.12.1 or higher.
300 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
302 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
304 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
306 * fr30-opc.c: Regenerated.
308 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
310 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
312 1998-12-15 Dave Brolley <brolley@cygnus.com>
314 * fr30-opc.c,fr30-opc.h: Regenerated.
316 1998-12-14 Dave Brolley <brolley@cygnus.com>
318 * fr30-opc.c,fr30-opc.h: Regenerated.
320 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
322 * fr30-opc.c,fr30-opc.h: Regenerated.
324 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
326 * m32r-opc.c: Regenerate.
328 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
330 * dis-buf.c (generic_strcat_address): reformat to GNU coding
331 conventions. change sprintf call to an sprintf_vma call.
333 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
335 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
337 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
339 The following changes were made by
340 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
341 David Taylor <taylor@texas.cygnus.com>, and
342 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
343 merge in changes by HP; HP did not create ChangeLog entries.
345 * dis-buf.c (generic_strcat_address): new function.
347 * hppa-dis.c: Changes to improve hppa disassembly.
348 Changed formatting in : reg_names, fp_reg_names,control_reg,
349 New variables : sign_extension_names, deposit_names, conversion_names
350 float_test_names, compare_cond_names_double, add_cond_names_double,
351 logical_cond_names_double, unit_cond_names_double,
352 branch_push_pop_names, saturation_names, shift_names, mix_names,
353 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
354 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
355 (fput_const): renamed as fput_hex_const
357 - use the macros fputs_filtered and
358 fput_decimal_const whenever possible; calls to sign_extend require
359 2 params -- add a missing second param of 0.
360 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
361 architecture version number of current machine. HP folks are
362 trying to handle situation where the target program was compiled
363 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
365 - added new cases : 'g', 'B', 'm'
366 - added cases specifically for PA 2.0
367 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
368 - calls to fput_const become calls to fput_hex_const
370 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
372 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
373 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
374 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
375 * Makefile.in: Rebuilt.
376 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
378 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
379 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
381 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
383 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
385 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
387 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
389 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
390 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
392 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
394 * fr30-opc.c: Regenerate.
396 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
398 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
400 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
402 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
404 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
406 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
408 1998-11-30 Doug Evans <devans@casey.cygnus.com>
410 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
411 CGEN_INSN_BASE_VALUE.
412 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
413 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
415 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
417 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
419 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
421 * fr30-asm.c,fr30-dis.c: Regenerated.
423 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
425 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
427 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
429 * fr30-opc.c: Regenerated.
431 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
433 * fr30-opc.c: Regenerated.
434 * fr30-opc.h: Regenerated.
435 * fr30-dis.c: Regenerated.
436 * fr30-asm.c: Regenerated.
438 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
440 * mips-opc.c (sync.p,sync.l): Swap insn values.
442 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
444 * fr30-opc.c: Regenerate.
446 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
448 * fr30-opc.c: Regenerated.
449 * fr30-opc.h: Regenerated.
451 1998-11-18 Doug Evans <devans@casey.cygnus.com>
453 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
454 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
456 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
458 * fr30-opc.c: Regenerated.
460 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
462 * fr30-opc.c: Regenerated.
463 * fr30-opc.h: Regenerated.
464 * fr30-dis.c: Regenerated.
465 * fr30-asm.c: Regenerated.
467 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
469 * po/opcodes.pot: Regenerated.
470 * fr30-opc.c: Regenerated.
471 * fr30-opc.h: Regenerated.
472 * fr30-dis.c: Regenerated.
473 * fr30-asm.c: Regenerated.
475 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
477 * disassemble.c (disassembler): Add support for FR30 target.
479 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
481 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
482 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
484 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
486 * po/opcodes.pot: Regenerate.
487 * po/POTFILES.in: Regenerate.
488 * fr30-opc.c: Regenerate.
489 * fr30-opc.h: Regenerate.
491 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
493 * m32r-asm.c: Regenerate.
495 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
497 * configure.in: Added case for bfd_fr30_arch.
498 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
499 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
500 (CLEANFILES): Added stamp-fr30.
502 * fr30-asm.c: New file.
503 * fr30-dis.c: New file.
504 * fr30-opc.c: New file.
505 * fr30-opc.h: New file.
506 * po/POTFILES.in: Regenerated
507 * po/opcodes.pot: Regenerated
509 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
511 * configure.in: detect cygwin* instead of cygwin32*
512 * configure: regenerate
514 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
516 * mips-opc.c (IS_M): Added.
518 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
520 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
522 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
524 * m32r-opc.h,m32r-opc.c: Regenerate.
526 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
528 * i386-dis.c (OP_3DNowSuffix): New static function.
531 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
532 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
533 (insn_codep): New static variable.
534 (print_insn_x86): Init insn_codep after prefixes.
535 (grps): Add GRP14 entries for prefetch, prefetchw.
538 From Jeff B Epler <jepler@usgs.gov>
539 * i386-dis.c (Suffix3DNow): New table.
541 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
543 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
545 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
547 * d10v-dis.c (print_operand): If num is nonzero, then
548 add OPERAND_ACC1, not OPERAND_ACC0.
550 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
552 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
555 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
557 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
560 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
562 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
564 1998-09-09 Michael Meissner <meissner@cygnus.com>
566 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
569 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
571 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
573 (print_insn_little_arm): Detect Thumb symbols in elf object
576 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
578 * alpha-dis.c (print_insn_alpha): Use the machine type to
579 decide which PALcode set to include.
581 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
583 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
585 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
587 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
588 MSUB and MSUBS instructions.
590 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
592 * ppc-opc.c (powerpc_operands): Omit parens around additions in
595 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
597 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
598 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
599 +, -, and d for ColdFire.
601 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
602 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
603 (extract_mbe): Likewise.
605 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
607 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
609 * m10300-opc.c: First cut at UDF instructions.
611 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
613 * m32r-opc.c: Regenerate (remove semantic descriptions).
615 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
617 * arm-dis.c (print_insn_big_arm): Fix indentation.
618 (print_insn_little_arm): Likewise.
620 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
622 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
624 (print_insn_little_arm): Likewise.
626 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
628 Move all global state data into opcode table struct, and treat
629 opcode table as something that is "opened/closed".
630 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
631 (cgen_asm_init): Delete.
632 (cgen_set_parse_operand_fn): New function.
633 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
634 (cgen_dis_init): Delete.
635 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
636 (cgen_current_{opcode_table_mach,endian}): Delete.
637 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
639 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
641 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
644 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
646 * m10300-opc.c: Add entries for "no_match_operands" field in
649 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
651 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
653 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
655 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
657 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
659 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
661 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
663 (OP_J): Remove unnecessary subtraction when 16-bit displacement
664 will be masked later.
666 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
668 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
670 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
672 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
674 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
676 * m10300-dis.c: Only recognize instructions from the currently
678 * m10300-opc.c: Add field indicating the particular variant of
679 the mn10300 each instruction is available on.
681 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
683 * configure.in: For bfd_vax_arch, build vax-dis.lo.
684 * Makefile.am: Rebuild dependencies.
685 (CFILES): Add vax-dis.c.
686 (ALL_MACHINES): Add vax-dis.lo.
687 * aclocal.m4: Rebuild with current libtool.
688 * configure, Makefile.in: Rebuild.
690 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
692 * vax-dis.c: New file, from work by Pauline Middelink
693 <middelin@polyware.iaf.nl>.
694 * disassemble.c (ARCH_vax): Define if ARCH_all.
695 (disassembler): Add case for ARCH_vax.
696 * makefile.vms: Support compilation on vms/vax.
698 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
700 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
701 related to sign extension and the size of ints.
703 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
705 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
706 instructions. Support (sp) addressing mode by expanding it into
709 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
711 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
713 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
715 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
717 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
719 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
722 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
724 * mips-dis.c (print_insn_little_mips): Previously, instruction
725 printing references the symbol table to determine whether the
726 instruction resides in a block regular instructions or mips16
727 instructions. However, when the disassembler gets used in other
728 environments where the symbol table is not present, we no longer
729 rely in the symbol table, rather, use the low bit of the
730 instructions address to guess. There should be no change for usage
731 of the disassembler in host based programs, gdb, objdump.
732 (print_insn_big_mips): ditto.
733 (print_insn_mips): ditto
735 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
737 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
739 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
741 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
743 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
745 * i386-dis.c (index16): Add '%' to register names. Use ','
748 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
750 * i386-dis.c: Don't print opcode suffix when we can figure out the
751 size (and gas can!) by register operands, or from the default
753 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
755 (dis386, dis386_twobyte, grps): Use new suffix macros.
756 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
757 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
758 order of cmps operands to agree with Intel docs. Correct operand
759 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
760 agree with Intel docs.
761 (print_insn_x86): Print orphan fwait before other prefixes.
762 Return correct byte count for orphan fwait with prefixes. Don't
763 print `bound' operands in reverse order.
764 (ckprefix): Stop accumulating prefixes if we get fwait.
765 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
767 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
769 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
770 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
772 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
774 Fix problems when bfd_vma is wider than long.
775 * i386-dis.c: Make op_address and start_pc unsigned.
776 (set_op): Make parameter unsigned.
777 (print_insn_x86): Cast to bfd_vma when passing a value to
779 * ns32k-dis.c (CORE_ADDR): Don't define.
780 (print_insn_ns32k): Change type of addr to bfd_vma. Use
781 bfd_scan_vma to read back address.
782 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
784 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
785 (NEXTULONG): New definition.
786 (print_insn_m68k): Avoid overflow when computing third argument of
788 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
789 Use disp instead of val to store offset values.
790 (print_indexed): Use base_disp instead of word to store base
791 displacement, to avoid overflow.
792 * m10300-dis.c (disassemble): Cast value to long when computing
793 pc-relative address, to get correct sign extension.
795 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
797 * m32r-opc.c: Regenerate.
799 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
801 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
802 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
804 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
806 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
808 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
810 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
812 (OP_DSreg): Rename from OP_DSSI.
813 (OP_ESreg): Rename from OP_ESDI.
814 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
816 (append_seg): Rename from append_prefix.
817 (ptr_reg): New function.
818 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
820 (PREFIX_ADDR): Rename from PREFIX_ADR.
821 (float_reg): Add non-broken opcodes for people who don't want
824 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
826 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
829 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
831 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
833 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
835 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
836 0; produce error message for shifts of size 32 (or 64 for 64-bit
837 shifts), because the hardware doesn't support them.
839 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
841 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
842 LONG_2, LONG_2b formats to use this new operand.
844 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
846 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
848 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
850 * sparc-dis.c (print_insn_sparc): big endian instruction / little
853 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
855 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
856 and SHORT_B3b formats to use Rb instead of Ra.
858 Add FLAG_MUL16 to MUL2XH opcode.
860 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
861 to existing 1.1.1 parallelisation prohibition procedure.
863 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
865 * m32r-asm.c,m32r-dis.c: Regenerate.
867 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
869 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
870 with a shift count of 0.
872 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
874 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
875 (cgen_hw_lookup_by_num): New function.
877 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
879 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
881 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
883 * sparc-dis.c (print_insn_sparc): Always fetch instructions
884 as big-endian on SPARClite.
886 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
888 * d30v-opc.c (pre_defined_register): Remove alias for r0.
890 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
892 * po/Make-in (install-info): New target.
894 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
896 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
897 * configure: Rebuild.
899 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
901 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
902 variety of ISA2 instructions to set bottom ten bits of trap code.
904 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
906 * Makefile.am (config.status): Add explicit target so that
907 config.status depends upon bfd/configure.in.
908 * Makefile.in: Rebuild.
910 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
912 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
913 instructions to set bottom ten bits of break code.
914 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
915 for above optional argument.
917 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
919 * makefile.vms: Run dec c with /nodebug.
921 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
923 * Makefile.in: Rebuilt.
924 * Makefile.am: Regenerated dependencies with mkdep.
926 * opintl.h (_): Define as dgettext.
928 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
930 * cgen-asm.c: Internationalised.
931 * m32r-asm.c: Internationalised.
932 * m32r-dis.c: Internationalised.
933 * m32r-opc.c: Internationalised.
935 * aclocal.m4: Regenerated.
936 * configure: Regenerated.
937 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
938 * Makefile.in: Rebuild.
939 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
940 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
942 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
944 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
946 * aclocal.m4, configure: Rebuild with current tools.
948 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
950 * opintl.h: New file - contains internationalisation macros used
951 by source files in this directory.
952 * po/: New subdirectory - contains internationalisation files.
953 * po/Make-in: New file - Makefile constructor.
954 * po/POTFILES.in: New file - list of files in opcodes directory
955 that should be scan for internationalisation macros.
956 * po/opcodes.pot: New file - list of internationisation strings
957 found in files mentioned in po/POTFILES.in.
958 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
959 entry. Add intl directory to include paths.
960 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
961 HAVE_STRCPY, HAVE_LC_MESSAGES
962 * configure.in: Add rule to build Makefile in po subdirectory.
963 * Makefile.in: Rebuilt.
964 * aclocal.m4: Rebuilt.
965 * config.in: Rebuilt.
966 * configure: Rebuilt.
967 * alpha-opc.c: Internationalised.
968 * arc-dis.c: Internationalised.
969 * arc-opc.c: Internationalised.
970 * arm-dis.c: Internationalised.
971 * cgen-asm.c: Internationalised.
972 * d30v-dis.c: Internationalised.
973 * dis-buf.c: Internationalised.
974 * h8300-dis.c: Internationalised.
975 * h8500-dis.c: Internationalised.
976 * i386-dis.c: Internationalised.
977 * m10200-dis.c: Internationalised.
978 * m10300-dis.c: Internationalised.
979 * m68k-dis.c: Internationalised.
980 * m88k-dis.c: Internationalised.
981 * mips-dis.c: Internationalised.
982 * ns32k-dis.c: Internationalised.
983 * opintl.h: Internationalised.
984 * ppc-opc.c: Internationalised.
985 * sparc-dis.c: Internationalised.
986 * v850-dis.c: Internationalised.
987 * v850-opc.c: Internationalised.
989 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
991 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
992 (asm_hash_table_entries): New variable.
993 (cgen_asm_init): Free asm_hash_table_entries.
994 (hash_insn_array,hash_insn_list): New functions.
995 (build_asm_hash_table): Use them. Hash macro insns as well.
996 (cgen_asm_lookup_insn): Update.
997 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
998 (dis_hash_table_entries): New variable.
999 (cgen_dis_init): Free dis_hash_table_entries.
1000 (hash_insn_array,hash_insn_list): New functions.
1001 (build_dis_hash_table): Use them. Hash macro insns as well.
1002 (cgen_dis_lookup_insn): Update.
1003 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1004 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1005 (cgen_macro_insn_count): New function.
1006 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1008 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1010 * i386-dis.c (OP_DSSI): Print segment override.
1012 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1014 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1017 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1019 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1020 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1021 * configure.in: Define and substitute WIN32LDFLAGS and
1023 * aclocal.m4: Rebuild with new libtool.
1024 * configure, Makefile.in: Rebuild.
1026 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * m32r-opc.c: Regenerate.
1030 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1032 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1033 before trying to copy it.
1034 * Makefile.in: Rebuild.
1036 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1038 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1040 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1042 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1043 from an arbitrary valid buffer instead of fetching them on demand
1045 (invalid_float): use bit_extract_simple() instead of bit_extract().
1047 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1049 From H.J. Lu <hjl@gnu.org>:
1050 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1053 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1055 * Branched binutils 2.9.
1057 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1059 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1060 disassembling last 4 bytes of a section.
1062 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1064 Fix some gcc -Wall warnings:
1065 * arc-dis.c (print_insn): Add casts to avoid warnings.
1066 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1067 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1068 * m10200-dis.c (disassemble): Likewise.
1069 * m10300-dis.c (disassemble): Likewise.
1070 * ns32k-dis.c (print_insn_ns32k): Likewise.
1071 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1072 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1073 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1074 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1075 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1076 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1077 * tic80-dis.c (print_one_instruction): Likewise.
1078 * w65-dis.c (print_operand): Likewise.
1079 * z8k-dis.c (fetch_data): Likewise.
1080 * a29k-dis.c: Add return type for find_byte_func_type.
1081 * arc-opc.c: Include <stdio.h>. Remove declarations of
1082 insert_multshift and extract_multshift.
1083 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1085 (extract_value): Fully parenthesize expression.
1086 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1087 * h8500-opc.h (h8500_table): Fully bracket initializer.
1088 * w65-opc.h (optable): Likewise.
1089 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1090 * i386-dis.c (OP_E): Initialize local variables.
1091 * m10200-dis.c (print_insn_mn10200): Likewise.
1092 * mips-dis.c (print_insn_mips16): Likewise.
1093 * sh-dis.c (print_insn_shx): Likewise.
1094 * v850-dis.c (print_insn_v850): Likewise.
1095 * ns32k-dis.c (print_insn_arg): Declare.
1096 (get_displacement, invalid_float): Declare.
1097 (list_search, sign_extend, flip_bytes): Declare return type.
1098 (get_displacement): Likewise.
1099 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1101 (print_insn_ns32k): Make i unsigned.
1102 (invalid_float): Make static. Declare type of val.
1103 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1104 on each for iteration.
1105 * tic30-dis.c (get_indirect_operand): Likewise.
1106 * z8k-dis.c (print_insn_z8001): Declare return type.
1107 (print_insn_z8002): Likewise.
1108 (unparse_instr): Fix sprintf format strings.
1110 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1112 * mips-opc.c: Add "sync.l" and "sync.p".
1114 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1116 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1117 default m68k variant to recognize.
1119 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1120 (ctrl, cobr, mem, ea): Likewise.
1121 (print_addr): Likewise. Remove cast.
1122 (ea): Cast argument of print_addr to bfd_vma.
1124 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1126 (cgen_parse_unsigned_integer): Likewise.
1127 (cgen_parse_address): Likewise.
1129 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1131 * i960-dis.c (ctrl): Add full braces to structure initialization.
1132 (cobr, mem, reg): Likewise.
1133 (ea): Correct parenthesization in expression.
1135 * cgen-asm.c: Include <ctype.h>.
1136 (build_asm_hash_table): Remove unused local variable i.
1137 (cgen_parse_keyword): Add casts to avoid warnings.
1139 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1140 symbol. Fix indentation.
1141 (print_insn_little_arm): Likewise.
1143 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1145 * configure.in: Use AM_DISABLE_SHARED.
1146 * aclocal.m4, configure: Rebuild with libtool 1.2.
1148 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1150 These patches are courtesy of Jonathan Walton and Tony Thompson
1151 (athompso@cambridge.arm.com).
1153 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1156 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1157 both the offset and the label closest to the destination.
1159 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1161 * m32r-opc.h: Regenerate.
1163 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1165 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1167 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1169 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1170 assume that info->symbols is non-empty.
1172 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1174 * alpha-opc.c (cvtqs) There is no such thing.
1175 (cvttq): Missing most of the /*d variants.
1177 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1179 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1180 delayed branches or jumps.
1182 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1184 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1186 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1187 * tic30-dis.c (print_branch): Likewise.
1189 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1191 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1192 saved_symbol code as it is no longer needed.
1194 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1196 * cgen-asm.c: Include symcat.h.
1197 * cgen-dis.c,cgen-opc.c: Ditto.
1198 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1200 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1202 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1204 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1206 * m32r-opc.[ch]: Regenerate.
1208 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1210 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1211 arguments. Don't perform validation here.
1212 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1214 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1216 * m32r-opc.c: Regenerate.
1218 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1220 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1221 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1223 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1225 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1227 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1229 * configure.in: Get the version number from BFD.
1230 * configure: Rebuild.
1232 From H.J. Lu <hjl@gnu.org>:
1233 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1234 * Makefile.in: Rebuild.
1236 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1238 * m32r-opc.c: Regenerate.
1239 * m32r-opc.h: Regenerate.
1241 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1243 * m32r-opc.c: Regenerate.
1245 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1247 Fix rac to accept only a0:
1248 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1249 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1250 Introduce OPERAND_GPR.
1251 * d10v-dis.c (print_operand): Likewise.
1253 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1255 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1256 (cgen_hw_lookup): Make result const.
1257 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1259 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1261 * configure, aclocal.m4: Rebuild with new libtool.
1263 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1265 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1266 instructions use a PC relative branch, not absolute.
1268 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1270 * configure.in: Set libtool_enable_shared rather than
1271 libtool_shared. Remove diversion hack.
1272 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1274 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1276 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1277 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1279 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1281 * tic30-dis.c: New file.
1282 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1283 * configure.in: Handle bfd_tic30_arch.
1284 * Makefile.am: Rebuild dependencies.
1285 (CFILES): Add tic30-dis.c
1286 (ALL_MACHINES): Add tic30-dis.lo.
1287 * configure, Makefile.in: Rebuild.
1289 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1291 * m32r-opc.h (HAVE_CPU_M32R): Define.
1293 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1295 * v850-opc.c (insertion routines): If both alignment and size is
1296 wrong then report this.
1298 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1300 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1301 Only recognize instructions for the current target_processor.
1303 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1305 * d10v-dis.c (PC_MASK): Correct value.
1306 (print_operand): If there's a reloc, don't calculate the
1307 address because they could be in different sections.
1309 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1311 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1312 instruction after the 4650's "mul" instruction; nobody's using the
1313 4010 these days. If object files someday indicate which processor
1314 variant they're intended for, we can do a better job at this.
1316 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1318 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1319 table provided entry size. Use CGEN_INSN_MNEMONIC.
1320 (cgen_parse_keyword): Rewrite.
1321 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1322 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1323 * cgen-opc.c: Clean up pass over `struct foo' usage.
1324 (cgen_keyword_lookup_value): Handle "" entry.
1325 (cgen_keyword_add): Likewise.
1327 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1329 * mips-opc.c: Add FP_D to s.d instruction flags.
1331 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1333 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1335 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1337 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1338 PC relative offset forms before the 15 bit forms. An assembler command
1339 line option now chooses the default.
1341 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1343 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1344 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1346 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1348 * configure: Only build libopcodes shared if --enable-shared's value
1349 was `yes', or was set to `*opcodes*'.
1350 * aclocal.m4: Likewise.
1351 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1352 original source of this bit of code. It's not clear what the best fix
1355 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1357 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1358 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1359 offset forms before the 15 bit forms, to default to the long forms.
1361 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1363 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1365 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1367 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1368 symbol if none is present.
1369 (print_insn_big_arm): Prevent examination of stored symbol if
1372 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1374 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1376 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1378 * disassemble.c: Remove disasm_symaddr() function.
1380 * arm-dis.c: Use info->symbol instead of info->flags to determine
1381 if disassmbly should be in Thumb or Arm mode.
1383 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1385 * arm-dis.c: Add support for disassembling Thumb opcodes.
1386 (print_insn_thumb): New function.
1388 * disassemble.c (disasm_symaddr): New function.
1390 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1391 (thumb_opcodes): Table of Thumb opcodes.
1393 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1395 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1397 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1398 and 'v' as operand types.
1400 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1402 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1403 <olivier.carmona@di.epfl.ch>.
1404 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1405 which has a two word opcode with a one word argument.
1407 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1409 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1410 unsigned, not signed.
1411 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1413 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1415 * d10v-dis.c (print_operand):
1416 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1418 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1420 * d10v-opc.c (OPERAND_FLAG): Split into:
1421 (OPERAND_FFLAG, OPERAND_CFLAG) .
1425 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1427 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1428 field for all INSN_MACRO's.
1429 * mips16-opc.c: same
1431 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1433 * mips-opc.c (sync,cache): These are 3900 insns.
1435 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1437 sh-opc.h (sh_table): Remove ftst/nan.
1439 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1441 * mips-opc.c (ffc, ffs): Fix mask.
1443 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1445 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1448 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1450 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1451 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1453 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1455 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1456 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1458 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1460 * v850-dis.c (disassemble): Replace // with /* ... */
1462 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1464 * sparc-opc.c: Add wr & rd for v9a asr's.
1465 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1466 (v9a_asr_reg_names): New variable.
1467 Patch from David Miller <davem@vger.rutgers.edu>.
1469 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1471 * sparc-opc.c (v9notv9a): New insn type.
1472 (IMPDEP): Move to the end to not conflict with edge8 et al.
1473 Patch from David Miller <davem@vger.rutgers.edu>.
1475 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1477 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1479 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1481 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1483 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1485 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1486 of disassemble_info structure to determine if an overlay address
1487 has a matching symbol in low memory.
1489 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1490 new symbol_at_address_func field in disassemble_info structure.
1492 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1494 * v850-opc.c (extract_d22): Use signed arithmatic.
1496 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1498 * mips-opc.c: Three op mult is not an ISA insn.
1500 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1502 * mips-opc.c: Fix formatting.
1504 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1506 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1507 than assuming that char is signed. Explicitly sign extend 16 bit
1508 values, rather than assuming that short is 16 bits.
1509 (OP_sI, OP_J, OP_DIR): Likewise.
1511 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1513 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1516 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1518 * v850-opc.c: Fix typo in comment.
1520 * v850-dis.c (disassemble): Add test of processor type when
1521 determining opcodes.
1523 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1525 * configure.in: Use a diversion to set enable_shared before the
1526 arguments are parsed.
1527 * configure: Rebuild.
1529 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1531 * m68k-opc.c (TBL1): Use ! rather than `.
1532 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1534 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1536 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1538 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1540 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1543 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1544 * aclocal.m4: Rebuild with new libtool.
1545 * configure: Rebuild.
1547 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1549 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1551 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1553 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1555 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1557 * v850-opc.c (v850_opcodes): Further rearrangements.
1559 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1561 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1563 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1565 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1568 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1570 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1572 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1574 * v850-opc.c: Initialise processors field of v850_opcode structure.
1576 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1578 Merge changes from Martin Hunt:
1580 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1582 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1583 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1584 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1586 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1588 * d30v-dis.c (print_insn): First operand of d*i (delayed
1589 branch) instructions is relative.
1591 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1592 (d30v_operand_table): Add IMM6S3 type.
1593 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1595 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1596 and cmp instructions.
1598 * d30v-opc.c: Correct entries for repeat*, and sat*.
1599 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1600 types. Correct several formats.
1602 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1604 * d30v-opc.c (pre_defined_registers): Change control registers.
1606 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1607 SHORT_C2. Manual was incorrect.
1609 * d30v-dis.c (lookup_opcode): Return value now indicates
1610 if an opcode has a short and a long form. Used for deciding
1611 to append a ".s" or ".l".
1612 (print_insn): Append a ".s" to an instruction if it is
1613 the short form and ".l" if it is a long form. Do not append
1614 anything if the instruction has only one possible size.
1616 * d30v-opc.c: Change mulx2h to require an even register.
1617 New form: SHORT_A2; a SHORT_A form that needs an even
1618 register as the first operand.
1620 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1621 instruction was not being disassembled if there were an odd
1622 number of instructions.
1624 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1626 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1628 * v850-dis.c (disassemble): Improved display of register lists.
1630 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1632 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1633 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1634 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1635 fandnot1s, fandnot2s.
1637 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1639 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1641 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1643 * cgen-asm.c (cgen_parse_address): New argument resultp.
1644 All callers updated.
1645 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1647 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1649 * mn10200-dis.c (disassemble): PC relative instructions are
1650 relative to the next instruction, not the current instruction.
1652 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1654 * v850-dis.c (disassemble): Only signed extend values that are not
1655 returned by extract functions.
1656 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1658 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1660 * v850-opc.c: Update comments. Remove use of
1661 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1663 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1665 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1667 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1669 * configure: Rebuilt with latest devo autoconf for NT support.
1671 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1673 * v850-dis.c (disassemble): Use curly brace syntax for register
1676 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1677 where r0 is being used as a destination register.
1679 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1681 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1683 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1685 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1687 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1689 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1690 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1693 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1695 * configure (cgen_files): Add support for v850e target.
1696 * configure.in (cgen_files): Add support for v850e target.
1698 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1700 * configure (cgen_files): Add support for v850ea target.
1701 * configure.in (cgen_files): Add support for v850ea target.
1703 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1705 * configure.in (bfd_arc_arch): Add.
1706 * configure: Rebuild.
1707 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1708 * Makefile.in: Rebuild.
1709 * arc-dis.c, arc-opc.c: New files.
1710 * disassemble.c (ARCH_all): Define ARCH_arc.
1711 (disassembler): Add ARC support.
1713 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1715 * v850-dis.c (disassemble): Add support for v850EA instructions.
1717 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1718 (v850_opcodes): Add v850EA instructions.
1720 * v850-dis.c (disassemble): Add support for v850E instructions.
1722 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1723 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1724 insert_spe, extract_spe): New Functions.
1725 (v850_opcodes): Add v850E instructions.
1727 * v850-opc.c: Reorganised and re-layed out to improve readability
1730 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1732 * configure: Rebuild with autoconf 2.12.1.
1734 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1736 * aclocal.m4, configure: Rebuild with new automake patches.
1738 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1740 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1741 * acinclude.m4: Just include acinclude.m4 from BFD.
1742 * aclocal.m4, configure: Rebuild.
1744 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * Makefile.am: New file, based on old Makefile.in.
1747 * acconfig.h: New file.
1748 * acinclude.m4: New file.
1749 * stamp-h.in: New file.
1750 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1751 Removed shared library handling; now handled by libtool. Replace
1752 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1753 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1754 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1755 handling in AC_OUTPUT.
1756 * dep-in.sed: Change .o to .lo.
1757 * Makefile.in: Now built with automake.
1758 * aclocal.m4: Now built with aclocal.
1759 * config.in, configure: Rebuild.
1761 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1763 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1765 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1767 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1769 * sparc-dis.c (sorted_opcodes): New static local.
1770 (struct opcode_hash): `opcode' is pointer to const element.
1771 (build_hash): First arg is now table of sorted pointers.
1772 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1773 (compare_opcodes): Update.
1775 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1777 * cgen-opc.c: #include <ctype.h>.
1778 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1779 Handle case insensitive hashing.
1780 (hash_keyword_value): Change type of `value' to unsigned int.
1782 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1784 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1785 precision FP, mark it as such. Likewise for double precision
1786 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1789 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1791 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1793 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1794 nesting depth when all the macros are expanded.
1796 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1798 * sparc-opc.c: The fcmp v9a instructions take an integer register
1799 as a destination, not a floating point register. From Christian
1800 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1802 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1804 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1805 syntax. From Roman Hodek
1806 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1808 * i386-dis.c (twobyte_has_modrm): Fix pand.
1810 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1812 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1814 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1816 * arm-dis.c: Add prototypes for arm_decode_shift and
1819 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1821 * mips-opc.c: Add r3900 insns.
1823 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1825 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1826 print delay slot instructions on the same line. When using a PC
1827 relative load, add a comment with the value being loaded if it can
1830 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1832 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1833 to pushS/popS for segment regs and byte constant so that
1834 pushw/popw printed when in 16 bit data mode.
1836 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1837 print cbtw, cwtd in 16 bit data mode.
1838 * i386-dis.c (putop): extra case W to support above.
1840 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1841 address size prefix in 16 bit address mode.
1843 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1845 * sh-dis.c: Reindent. Rename local variable fprintf to
1848 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1850 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1852 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1854 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1856 * mips16-opc.c (mip16_opcodes): same.
1858 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1860 * m68k-opc.c (moveb): Change $d to %d.
1862 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1864 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1865 (twobyte_has_modrm): Likewise.
1867 (OP_MMX, OP_EM, OP_MS): New static functions.
1869 * i386-dis.c: Revert patch of April 4. The output now matches
1872 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1874 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1877 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1879 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1881 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1883 * Makefile.in (install): Depend upon installdirs.
1884 (installdirs): New target.
1886 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1888 From Thomas Graichen <graichen@rzpd.de>:
1889 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1890 * configure: Rebuild.
1892 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1894 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1895 Delete string{,s}.h support.
1897 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1899 * cgen-asm.c (cgen_parse_operand_fn): New global.
1900 (cgen_parse_{{,un}signed_integer,address}): Update call to
1901 cgen_parse_operand_fn.
1902 (cgen_init_parse_operand): New function.
1903 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1904 from cgen_asm_init_parse.
1905 (m32r_cgen_assemble_insn): New operand `errmsg'.
1906 Delete call to as_bad, return error message to caller.
1907 (m32r_cgen_asm_hash_keywords): #if 0 out.
1909 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1911 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1913 [case 'J']: Fix typo in register name.
1915 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1917 * configure.in: Substitute SHLIB_LIBS.
1918 * configure: Rebuild.
1919 * Makefile.in (SHLIB_LIBS): New variable.
1920 ($(SHLIB)): Use $(SHLIB_LIBS).
1922 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1924 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1926 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1928 * disassemble.c (disassembler): Handle m32r.
1930 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1932 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1933 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1934 * Makefile.in (CFILES): Add them.
1935 (ALL_MACHINES): Add them.
1936 (dependencies): Regenerate.
1937 * configure.in (cgen_files): New variable.
1938 (bfd_m32r_arch): Add entry.
1939 * configure: Regenerate.
1941 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1943 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1944 * configure: Rebuild.
1946 * Makefile.in: Rebuild dependencies.
1948 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1950 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1953 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * Branched binutils 2.8.
1957 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * m10200-dis.c: Rename from mn10200-dis.c.
1960 * m10200-opc.c: Rename from mn10200-opc.c.
1961 * m10300-dis.c: Rename from mn10300-dis.c
1962 * m10300-opc.c: Rename from mn10300-opc.c.
1963 * Makefile.in: Update accordingly.
1965 * mips16-opc.c: Add mul and dmul macros.
1967 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1969 * makefile.vms: Update CFLAGS, add clean target.
1971 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1973 * mips-opc.c: Add "wait". From Ralf Baechle
1974 <ralf@gnu.ai.mit.edu>.
1976 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1977 * configure, config.in: Rebuild.
1978 * sysdep.h: Include <stdlib.h> if it exists.
1979 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1981 * Makefile.in: Rebuild dependencies.
1983 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1985 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1986 Andrew Bray <andy@madhouse.demon.co.uk>.
1988 * mips-opc.c: Add cast when setting mips_opcodes.
1990 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1992 * v850-dis.c (disassemble): Fix sign extension problem.
1993 * v850-opc.c (extract_d*): Fix sign extension problems to make
1994 disassembly calculate branch offsets correctly.
1996 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1998 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2000 * mips-opc.c: Add dctr and dctw.
2002 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2004 * d30v-dis.c (print_insn): Change the way signed constants
2007 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2009 * Makefile.in (BFD_H): New variable.
2010 (HFILES): New variable.
2011 (CFILES): Add all C files.
2012 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2013 Delete old dependencies, and build new ones.
2014 * dep-in.sed: New file.
2016 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2018 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2020 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2022 * mn10200-opc.c: Change "trap" to "syscall".
2023 * mn10300-opc.c: Add new "syscall" instruction.
2025 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2027 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2028 mulul insns on the coldfire.
2030 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2032 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2033 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2034 (print_insn_little_arm): Likewise.
2036 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2038 Based on patches from H.J. Lu <hjl@lucon.org>:
2039 * i386-dis.c (fetch_data): Add prototype.
2040 * m68k-dis.c (fetch_data): Add prototype.
2041 (dummy_print_address): Add prototype. Make static.
2042 * ppc-opc.c (valid_bo): Add prototype.
2043 * sparc-dis.c (build_hash_table): Add prototype.
2044 (is_delayed_branch, compute_arch_mask): Add prototypes.
2045 (print_insn_sparc): Make several local variables const.
2046 (compare_opcodes): Change arguments to const PTR. Add prototype.
2047 * sparc-opc.c (arg): Change name field to be const.
2048 (lookup_name, lookup_value): Add prototypes. Change table and
2049 name parameters to be const.
2050 (sparc_encode_asi): Change name parameter to be const.
2051 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2052 (sparc_encode_sparclet_cpreg): Likewise.
2053 (sparc_decode_asi): Change return type to be const.
2054 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2055 (sparc_decode_sparclet_cpreg): Likewise.
2057 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2059 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2060 Solaris doesn't like the combined options, and the -f is
2062 (stamp-tshlink, install): Likewise.
2064 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2066 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2069 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2071 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2073 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2075 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2078 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2080 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2082 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2084 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2086 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2088 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2090 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2092 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2093 floatformat_to_double to make portable.
2094 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2097 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2099 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2100 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2102 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2104 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2105 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2107 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2109 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2110 (OFF_SL_BR_SCALED): ... to this, and added the flag
2111 TIC80_OPERAND_BASEREL to the flags word.
2112 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2115 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2117 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2118 Change mips_opcodes from const array to a pointer,
2119 and change bfd_mips_num_opcodes from const int to int,
2120 so that we can increase the size of the mips opcodes table
2123 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2125 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2126 store BITNUM values in the table in one's complement form
2127 to match behavior when assembler is given a raw numeric
2128 value for a BITNUM operand.
2129 * tic80-dis.c (print_operand_bitnum): Ditto.
2131 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2133 * d30v-opc.c: Removed references to FLAG_X.
2135 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2137 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2139 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2141 * Makefile.in: Added d30v object files.
2142 * configure: (bfd_d30v_arch) Rebuilt.
2143 * configure.in: (bfd_d30v_arch) Added new case.
2144 * d30v-dis.c: New file.
2145 * d30v-opc.c: New file.
2146 * disassemble.c (disassembler) Add entry for d30v.
2148 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2150 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2151 representations for the floating point BITNUM values.
2153 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2155 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2156 in the table in one's complement form, as they appear in the
2158 (tic80_symbol_to_value): Use macros to access predefined
2160 (tic80_value_to_symbol): Ditto.
2161 (tic80_next_predefined_symbol): New function.
2162 * tic80-dis.c (print_operand_bitnum): Remove code that did
2163 one's complement for BITNUM values.
2165 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2167 * makefile.vms: Remove 8 bit characters. Update to latest
2170 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2172 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2174 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2176 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2177 (IMM24_PCREL): Likewise.
2179 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2182 address for an extended PC relative instruction that is not a
2185 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2187 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2190 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2192 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2193 (tic80_opcodes): Sort entries so that long immediate forms
2194 come after short immediate forms, making it easier for
2195 assembler to select the right one for a given operand.
2197 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2201 (print_insn_mips16): Likewise.
2203 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2205 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2206 a symbol class that restricts translation to just that
2207 class (general register, condition code, etc).
2209 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2211 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2212 and REG_DEST_E for register operands that have to be
2213 an even numbered register. Add REG_FPA for operands that
2214 are one of the floating point accumulator registers.
2215 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2216 (tic80_opcodes): Change entries that need even numbered
2217 register operands to use the new operand table entries.
2218 Add "or" entries that are identical to "or.tt" entries.
2220 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2222 * mips16-opc.c: Add new cases of exit instruction for
2224 * mips-dis.c (print_mips16_insn_arg): Display floating point
2225 registers in operands of exit instruction. Print `$' before
2226 register names in operands of entry and exit instructions.
2228 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2230 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2231 pairs for all predefined symbols recognized by the assembler.
2232 Also used by the disassembling routines.
2233 (tic80_symbol_to_value): New function.
2234 (tic80_value_to_symbol): New function.
2235 * tic80-dis.c (print_operand_control_register,
2236 print_operand_condition_code, print_operand_bitnum):
2237 Remove private tables and use tic80_value_to_symbol function.
2239 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2241 * d10v-dis.c (print_operand): Change address printing
2242 to correctly handle PC wrapping. Fixes PR11490.
2244 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2246 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2249 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2251 * mips-dis.c (print_insn_mips16): Set insn_info information.
2252 (print_mips16_insn_arg): Likewise.
2254 * mips-dis.c (print_insn_mips16): Better handling of an extend
2255 opcode followed by an instruction which can not be extended.
2257 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2259 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2260 coldfire moveb instruction to not allow an address register as
2261 destination. Although the documentation does not indicate that
2262 this is invalid, experiments uncovered unexpected behavior.
2263 Added a comment explaining the situation. Thanks to Andreas
2264 Schwab for pointing this out to me.
2266 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2268 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2269 entries are presorted so that entries with the same mnemonic are
2270 adjacent to each other in the table. Sort the entries for each
2271 instruction so that this is true.
2273 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2275 * m68k-dis.c: Include <libiberty.h>.
2276 (print_insn_m68k): Sort the opcode table on the most significant
2277 nibble of the opcode.
2279 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2281 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2282 "vsub", "vst", "xnor", and "xor" instructions.
2283 (V_a1): Renamed from V_a, msb of accumulator reg number.
2284 (V_a0): Add macro, lsb of accumulator reg number.
2286 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2288 * tic80-dis.c (print_insn_tic80): Broke excessively long
2289 function up into several smaller ones and arranged for
2290 the instruction printing function to be callable recursively
2291 to print vector instructions that have both a load and a
2292 math instruction packed into a single opcode.
2293 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2294 to explain why it comes after the other vector opcodes.
2296 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2298 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2299 move insns to handle immediate operands.
2301 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2303 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2304 fix operand mask in the "moveml" entries for the coldfire.
2306 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2308 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2309 New macros for building vector instruction opcodes.
2310 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2311 FMT_LI, which were unused. The field is now a flags field.
2312 Remove some opcodes that are possible, but illegal, such
2313 as long immediate instructions with doubles for immediate
2314 values. Add "vadd" and "vld" instructions.
2316 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2318 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2319 the order more logical. Move the shift alias instructions ("rotl",
2320 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2321 interspersed with the regular sr.x and sl.x instructions. Add
2322 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2323 "sub", "subu", "swcr", and "trap".
2325 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2327 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2328 (OFF_SL_PC): Renamed from OFF_SL.
2329 (OFF_SS_BR): New operand type for base relative operand.
2330 (OFF_SL_BR): New operand type for base relative operand.
2331 (REG_BASE): New operand type for base register operand.
2332 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2333 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2334 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2336 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2337 10 char field, padded with spaces on rhs, rather than a string
2338 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2339 than old TIC80_OPERAND_RELATIVE. Add support for new
2340 TIC80_OPERAND_BASEREL flag bit.
2342 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2344 * tic80-dis.c (print_insn_tic80): Print floating point operands
2346 * tic80-opc.c (SPFI): Add single precision floating point
2347 immediate operand type.
2348 (ROTATE): Add rotate operand type for shifts.
2349 (ENDMASK): Add for shifts.
2350 (n): Macro for the 'n' bit.
2351 (i): Macro for the 'i' bit.
2352 (PD): Macro for the 'PD' field.
2353 (P2): Macro for the 'P2' field.
2354 (P1): Macro for the 'P1' field.
2355 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2358 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2360 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2361 adding in current address for pc-relative operands.
2363 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2365 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2366 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2367 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2368 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2369 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2370 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2371 (REG_SCALED, LSI_SCALED): New operand types.
2372 (E): New macro for 'E' bit at bit 27.
2373 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2374 opcodes, including the various size flavors (b,h,w,d) for
2375 the direct load and store instructions.
2377 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2381 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2382 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2383 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2384 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2385 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2386 masks with "MASK_* & ~M_*" to get the M bit reset.
2387 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2389 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2391 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2392 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2393 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2395 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2396 CC, SICR, and LICR table entries.
2397 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2398 "bcnd", and "brcr" opcodes.
2400 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2402 * ppc-opc.c (powerpc_operands): Make comment match the
2403 actual fields (no shift field).
2404 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2405 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2406 partial implementation, work in progress.
2407 * tic80-opc.c (tic80_operands): Begin construction operands table.
2408 (tic80_opcodes): Continue populating opcodes table and start
2409 filling in the operand indices.
2410 (tic80_num_opcodes): Add this.
2412 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2414 * m68k-opc.c: Add #B case for moveq.
2416 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2418 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2419 before they are used.
2421 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2423 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2424 for "breakpoint" instruction.
2426 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2428 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2429 (dep): Use ALL_CFLAGS rather than CFLAGS.
2431 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2433 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2436 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2438 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2439 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2441 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2443 * mips16-opc.c: Add "abs".
2445 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2447 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2448 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2449 (disassembler): Add bfd_arch_tic80 support to set disassemble
2450 to print_insn_tic80.
2451 * tic80-dis.c (print_insn_tic80): Add stub.
2453 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2455 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2456 * configure: Regenerate with autoconf.
2457 * tic80-dis.c: Add file.
2458 * tic80-opc.c: Add file.
2460 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2462 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2464 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2466 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2467 (mn10200_opcodes): Use it for some logicals and btst insns.
2468 Add "break" and "trap" instructions.
2470 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2472 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2474 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2476 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2477 relative load or add now depends upon whether the instruction is
2480 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2482 * mn10200-dis.c: Finish writing disassembler.
2483 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2484 Fix mask for "jmp (an)".
2486 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2487 handle endianness issues for mn10300.
2489 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2491 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2493 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2494 instruction. Fix opcode field for "movb (imm24),dn".
2496 * mn10200-opc.c (mn10200_operands): Fix insertion position
2499 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2501 * mn10200-opc.c: Create mn10200 opcode table.
2502 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2503 but moving along nicely.
2505 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2507 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2509 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2511 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2512 specifiers for fmovem* instructions.
2514 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2516 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2518 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2520 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2523 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2525 * mn10300-opc.c: Add some comments explaining the various
2528 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2530 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2532 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2535 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2536 operand specifiers in fmovm* instructions.
2538 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2540 * ppc-opc.c (insert_li): Give an error if the offset has the two
2541 least significant bits set.
2543 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2545 * mips-dis.c (print_insn_mips16): Separate the instruction from
2546 the arguments with a tab, not a space.
2548 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2550 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2553 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2556 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2558 * configure: Rebuild with autoconf 2.12.
2560 Add support for mips16 (16 bit MIPS implementation):
2561 * mips16-opc.c: New file.
2562 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2563 (mips16_reg_names): New static array.
2564 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2565 after seeing a 16 bit symbol.
2566 (print_insn_little_mips): Likewise.
2567 (print_insn_mips16): New static function.
2568 (print_mips16_insn_arg): New static function.
2569 * mips-opc.c: Add jalx instruction.
2570 * Makefile.in (mips16-opc.o): New target.
2571 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2572 * configure: Rebuild.
2574 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2576 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2577 operand specifiers in *save, *restore and movem* instructions.
2579 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2582 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2583 register operands for immediate arithmetic, not, neg, negx, and
2584 set according to condition instructions.
2586 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2587 specifier of the effective-address operand in immediate forms of
2588 arithmetic instructions. The specifier for the immediate operand
2589 notes how and where the constant will be stored.
2591 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2593 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2596 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2599 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2601 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2603 * mn10300-dis.c (disassemble): Handle register lists.
2605 * mn10300-opc.c: Fix handling of register list operand for
2606 "call", "ret", and "rets" instructions.
2608 * mn10300-dis.c (disassemble): Print PC-relative and memory
2609 addresses symbolically if possible.
2610 * mn10300-opc.c: Distinguish between absolute memory addresses,
2611 pc-relative offsets & random immediates.
2613 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2615 (disassemble): Handle SPLIT and EXTENDED operands.
2617 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2619 * mn10300-dis.c: Rough cut at printing some operands.
2621 * mn10300-dis.c: Start working on disassembler support.
2622 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2624 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2626 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2628 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2630 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2632 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2634 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2635 register argument is calls and jmp instructions.
2637 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2639 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2640 getx operand. Fix opcode for mulqu imm,dn.
2642 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2644 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2645 in MN10300_OPERAND_SPLIT operands for how many bits
2646 appear in the basic insn word. Add IMM32_HIGH24,
2647 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2648 (mn10300_opcodes): Use new operands as needed.
2650 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2651 for bset, bclr, btst instructions.
2652 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2654 * mn10300-opc.c (mn10300_operands): Remove many redundant
2655 operands. Update opcode table as appropriate.
2656 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2657 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2659 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2661 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2662 operands (for indexed load/stores). Fix bitpos for DI
2663 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2664 few instructions that insert immediates/displacements in the
2665 middle of the instruction. Add IMM8E for 8 bit immediate in
2666 the extended part of an instruction.
2667 (mn10300_operands): Use new opcodes as appropriate.
2669 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2671 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2672 sequential so the assembler never parallelizes it with
2675 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2677 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2678 a data/address register that appears in register field 0
2679 and register field 1.
2680 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2682 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2684 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2685 standard disassembly.
2687 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2688 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2689 Recategorize PALcode instructions.
2691 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2693 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2695 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2697 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2698 there are no operand types.
2700 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2702 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2704 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2706 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2708 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2710 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2712 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2713 and sst.w instructions.
2715 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2718 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2720 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2723 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2725 * ppc-opc.c (PPCPWR2): Define.
2726 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2729 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2731 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2732 field for movhu instruction.
2734 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2735 cast value to "long" not "signed long" to keep hpux10
2738 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2740 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2743 * mn10300-opc.c (FMT*): Remove definitions.
2745 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2746 for shift-by-register opcodes.
2748 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2749 into [AD][MN][01] for encoding the position of the register
2752 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2754 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2755 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2757 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2759 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2760 Fix various typos. Add "PAREN" operand.
2761 (MEM, MEM2): Define.
2762 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2763 operands. Fix several typos.
2765 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2768 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2770 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2771 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2773 (mn10300_opcodes): Break opcode format out into its own field.
2774 Update many operand fields to deal with signed vs unsigned
2775 issues. Fix one or two typos in the "mov" instruction
2776 opcode, mask and/or operand fields.
2778 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2780 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2781 m68851 wasn't reset.
2783 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2785 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2786 all opcodes. Very rough cut at operands for all opcodes.
2788 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2791 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2793 * mn10200-opc.c, mn10300-opc.c: New files.
2794 * mn10200-dis.c, mn10300-dis.c: New files.
2795 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2796 * disassemble.c: Break mn10x00 support into 10200 and 10300
2798 * configure.in: Likewise.
2799 * configure: Rebuilt.
2801 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2803 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2805 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2807 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2809 * disassemble (ARCH_mn10x00): Define.
2810 (disassembler): Handle bfd_arch_mn10x00.
2811 * configure.in: Recognize bfd_mn10x00_arch.
2812 * configure: Rebuilt.
2814 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2816 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2817 accordingly. Don't declare functions using op_rtn.
2819 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2821 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2822 params to be more standard.
2823 * (disassemble): Print absolute addresses and symbolic names for
2824 branch and jump targets.
2825 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2827 * (v850_opcodes): Add breakpoint insn.
2829 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2831 * m68k-opc.c: Move the fmovemx data register cases before the
2832 other cases, so that they get recognized before the data register
2833 does gets treated as a degenerate register list.
2835 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2837 * mips-opc.c: Add a case for "div" and "divu" with two registers
2838 and a destination of $0.
2840 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2842 * mips-dis.c (print_insn_arg): Add prototype.
2843 (_print_insn_mips): Ditto.
2845 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2847 * mips-dis.c (print_insn_arg): Print condition code registers as
2850 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2852 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2854 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2856 * v850-dis.c (disassemble): Make static. Provide prototype.
2858 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2860 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2863 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2865 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2866 ']' characters into the output stream.
2867 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2868 Add "memop" field to all opcodes (for the disassembler).
2869 Reorder opcodes so that "nop" comes before "mov" and "jr"
2870 comes before "jarl".
2872 * v850-dis.c (print_insn_v850): Fix typo in last change.
2874 * v850-dis.c (print_insn_v850): Properly handle disassembling
2875 a two byte insn at the end of a memory region when the memory
2876 region's size is only two byte aligned.
2878 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2880 * v850-dis.c (v850_reg_names): Define.
2881 (v850_sreg_names, v850_cc_names): Likewise.
2882 (disassemble): Very rough cut at printing operands (unformatted).
2884 * v850-opc.c (BOP_MASK): Fix.
2885 (v850_opcodes): Fix mask for jarl and jr.
2887 * v850-dis.c: New file. Skeleton for disassembler support.
2888 * Makefile.in Remove v850 references, they're not needed here.
2889 * configure.in: Add v850-dis.o when building v850 toolchains.
2890 * configure: Rebuilt.
2891 * disassemble.c (disassembler): Call v850 disassembler.
2893 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2894 (insert_d8_6, extract_d8_6): New functions.
2895 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2896 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2898 (IF4A, IF4B): Use "D7" instead of "D7S".
2899 (IF4C, IF4D): Use "D8_7" instead of "D8".
2900 (IF4E, IF4F): New. Use "D8_6".
2901 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2902 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2904 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2905 (v850_operands): Change D16 to D16_15, use special insert/extract
2906 routines. New new D16 that uses the generic insert/extract code.
2907 (IF7A, IF7B): Use D16_15.
2908 (IF7C, IF7D): New. Use D16.
2909 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2911 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2912 message. Issue an error if the branch offset is odd.
2914 * v850-opc.c: Add notes about needing special insert/extract
2915 for all the load/store insns, except "ld.b" and "st.b".
2917 * v850-opc.c (insert_d22, extract_d22): New functions.
2918 (v850_operands): Use insert_d22 and extract_d22 for
2920 (insert_d9): Fix range check.
2922 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2924 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2925 and set bits field to D9 and D22 operands.
2927 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2929 * v850-opc.c (v850_operands): Define SR2 operand.
2930 (v850_opcodes): "ldsr" uses R1,SR2.
2932 * v850-opc.c (v850_opcodes): Fix opcode specs for
2933 sld.w, sst.b, sst.h, sst.w, and nop.
2935 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2937 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2938 end of the opcode table.
2940 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2942 * d10v-opc.c (pre_defined_registers): Added register pairs,
2943 "r0-r1", "r2-r3", etc.
2945 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2947 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2948 Create I16U for an unsigned 16bit mmediate operand.
2949 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2951 * v850-opc.c (v850_operands): Define EP operand.
2952 (IF4A, IF4B, IF4C, IF4D): Use EP.
2954 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2955 with immediate operand, "movhi". Tweak "ldsr".
2957 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2958 correct. Get sld.[bhw] and sst.[bhw] closer.
2960 * v850-opc.c (v850_operands): "not" is a two byte insn
2962 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2964 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2966 * v850-opc.c (two): Get order of words correct.
2968 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2970 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2971 register source and destination operands.
2972 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2974 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2975 same thinko in "trap" opcode.
2977 * v850-opc.c (v850_opcodes): Add initializer for size field
2980 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2981 Add D8 for 8-bit unsigned field in short load/store insns.
2982 (IF4A, IF4D): These both need two registers.
2983 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2984 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2985 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2986 for "ldsr" and "stsr".
2987 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2990 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2991 short store word (sst.w).
2993 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2995 * v850-opc.c (v850_operands): Added insert and extract fields,
2996 pointers to functions that handle unusual operand encodings.
2998 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3000 * v850-opc.c (v850_opcodes): Enable "trap".
3002 * v850-opc.c (v850_opcodes): Fix order of displacement
3003 and register for "set1", "clr1", "not1", and "tst1".
3005 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3007 * v850-opc.c (v850_operands): Add "B3" support.
3008 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3011 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3013 * v850-opc.c: Close unterminated comment.
3015 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3017 * v850-opc.c (v850_operands): Add flags field.
3018 (v850_opcodes): add move opcodes.
3020 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3022 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3023 * configure: (bfd_v850v_arch) Add new case.
3024 * configure.in: (bfd_v850_arch) Add new case.
3025 * v850-opc.c: New file.
3027 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3029 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3031 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3033 * d10v-opc.c: Add additional information to the opcode
3034 table to help determinine which instructions can be done
3037 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3039 * mpw-make.sed: Update editing of include pathnames to be
3042 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3044 * arm-opc.h: Added "bx" instruction definition.
3046 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3048 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3050 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3052 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3054 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3056 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3058 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3060 * makefile.vms: Update for alpha-opc changes.
3062 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3064 * i386-dis.c (print_insn_i386): Actually return the correct value.
3065 (ONE, OP_ONE): #ifdef out; not used.
3067 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3069 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3070 Changed subi operand type to treat 0 as 16.
3072 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3074 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3077 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3079 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3080 memory transfer instructions. Add new format string entries %h and %s.
3081 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3084 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3086 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3087 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3089 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3091 * alpha-dis.c (print_insn_alpha_osf): Remove.
3092 (print_insn_alpha_vms): Remove.
3093 (print_insn_alpha): Make globally visible. Chose the register
3094 names based on info->flavour.
3095 * disassemble.c: Always return print_insn_alpha for the alpha.
3097 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3099 * d10v-dis.c (dis_long): Handle unknown opcodes.
3101 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3103 * d10v-opc.c: Changes to support signed and unsigned numbers.
3104 All instructions with the same name that have long and short forms
3105 now end in ".l" or ".s". Divs added.
3106 * d10v-dis.c: Changes to support signed and unsigned numbers.
3108 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3110 * d10v-dis.c: Change all functions to use info->print_address_func.
3112 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3114 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3115 move ccr/sr insns more strict so that the disassembler only
3116 selects them when the addressing mode is data register.
3118 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3119 * d10v-opc.c (pre_defined_registers): Declare.
3120 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3121 to pick a better name for the registers.
3123 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3125 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3126 operands for fexpand and fpmerge. From Christian Kuehnke
3127 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3129 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3131 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3132 print routine. Take new regnames and cpumask arguments.
3133 Kill the environment variable nonsense.
3134 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3135 (print_insn_alpha_vms): New function. Do VMS style regnames.
3136 * disassemble.c (disassembler): Test bfd flavour to pick
3137 between OSF and VMS routines. Default to OSF.
3139 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3141 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3142 * configure: Rebuild.
3143 * Makefile.in (install): Use @INSTALL_SHLIB@.
3145 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3147 * configure: (bfd_d10v_arch) Add new case.
3148 * configure.in: (bfd_d10v_arch) Add new case.
3149 * d10v-dis.c: New file.
3150 * d10v-opc.c: New file.
3151 * disassemble.c (disassembler) Add entry for d10v.
3153 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3155 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3156 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3158 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3160 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3161 distinguish between variants of the instruction set.
3162 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3163 distinguish between variants of the instruction set.
3165 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3167 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3168 the 8086 instruction set.
3169 * i386-dis.c: General cleanups. Make most things static. Add
3170 prototypes. Get rid of static variables aflags and dflags. Pass
3171 them as args (to almost everything).
3173 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3175 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3177 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3179 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3180 if the next arg is marked with SRC_IN_DST. Gross.
3182 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3183 we're looking for and find EXR.
3185 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3186 if we're looking for KBIT and we don't find it.
3188 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3191 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3192 3bit immediate operands.
3194 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3196 * Released binutils 2.7.
3198 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3199 <kkaempf@progis.ac-net.de>.
3201 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3203 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3205 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3207 * sparc-dis.c (print_insn_sparclite): New routine to print
3208 sparclite instructions.
3210 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3212 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3214 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3216 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3217 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3218 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3220 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3222 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3223 Use autoconf-set values.
3224 (docdir, oldincludedir): Removed.
3225 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3227 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3229 * alpha-opc.c: New file.
3230 * alpha-opc.h: Remove.
3231 * alpha-dis.c: Complete rewrite to use new opcode table.
3232 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3233 * configure: Rebuild with autoconf 2.10.
3234 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3235 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3237 (alpha-opc.o): New target.
3239 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3241 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3242 Set imm_added_to_rs1 even if the source and destination register
3245 * sparc-opc.c: Add some two operand forms of the wr instruction.
3247 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3249 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3252 * disassemble.c (disassembler): Handle H8/S.
3253 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3255 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * sparc-opc.c: Add beq/teq as aliases for be/te.
3259 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3260 <sergei@msil.sps.mot.com>.
3262 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3264 * makefile.vms: New file.
3266 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3268 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3270 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3273 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3275 * i386-dis.c (OP_OFF): Call append_prefix.
3277 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3279 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3280 unsigned long to silence a warning from the Solaris PowerPC
3283 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3285 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3287 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3289 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3291 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3292 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3293 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3294 cpush, cpusha, cpull sparclet insns.
3296 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3298 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3300 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3302 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3303 Set F_FLOAT on other floating point instructions.
3305 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3307 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3309 (powerpc_opcodes): Add 860/821 specific SPRs.
3311 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3313 * configure.in: Permit --enable-shared to specify a list of
3314 directories. Set and substitute BFD_PICLIST.
3315 * configure: Rebuild.
3316 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3317 uses. Set to @BFD_PICLIST@.
3319 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3321 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3322 not "abs", which may be needed for the absolute in something
3323 like btst #0,@10:8. Print L_3 immediates separately from other
3324 immediates. Change ABSMOV reference to ABS8MEM.
3326 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3328 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3329 (current_arch_mask): New static global.
3330 (compute_arch_mask): New static function.
3331 (print_insn_sparc): Delete sparc_v9_p. New static local
3332 current_mach. Resort opcode table if current_mach changes.
3333 Generalize "insn not supported" test.
3334 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3335 Delete test for v9/!v9.
3336 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3338 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3339 (brfcx): Renamed to FBRX.
3340 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3341 coprocessor mnemonics are not supported on the sparclet).
3342 (condf): Renamed to CONDF.
3343 (SLCBCC2): Delete F_ALIAS flag.
3345 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3347 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3348 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3350 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3352 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3353 that the shared library version number is set correctly.
3355 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3357 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3358 Miles Bader <miles@gnu.ai.mit.edu>.
3359 * configure: Rebuild.
3361 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3363 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3366 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3368 * configure: Rebuild with autoconf 2.8.
3370 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3372 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3373 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3375 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3377 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3378 since they appear as targets in Makefile.in.
3379 * configure: Rebuild.
3381 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3383 * mpw-make.sed: Edit out shared library support bits.
3385 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3387 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3388 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3389 (sparc_opcodes): Add sparclet insns.
3390 (sparclet_cpreg_table): New static local.
3391 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3392 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3394 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3396 * i386-dis.c (index16): New static variable.
3397 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3399 (OP_indirE): Return result of OP_E.
3400 (OP_E): Check for 16 bit addressing mode, and disassemble
3401 correctly. Optimised 32 bit case a little. Don't print
3402 "(base,index,scale)" when sib specifies only an offset.
3404 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3406 * configure.in: Set and substitute SHLIB_DEP.
3407 * configure: Rebuild.
3408 * Makefile.in (SHLIB_DEP): New variable.
3409 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3410 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3411 COMMON_SHLIB, add them to piclist with appropriate modifications.
3412 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3413 here: just use piclist.
3415 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3417 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3418 (print_insn_sparc): Rewrite v9/not-v9 tests.
3419 (compare_opcodes): Likewise.
3420 * sparc-opc.c (MASK_<ARCH>): Define.
3421 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3422 (sparclet,v6notv9): Define.
3423 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3424 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3426 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3428 * configure.in: Call AC_PROG_CC before configure.host.
3429 * configure: Rebuild.
3431 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3433 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3435 * i386-dis.c (onebyte_has_modrm): New static array.
3436 (twobyte_has_modrm): New static array.
3437 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3439 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3441 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3444 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3446 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3449 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3451 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3452 m68010up, not just m68020up | cpu32.
3454 * Makefile.in (SONAME): New variable.
3455 ($(SHLINK)): Make a link to the transformed name, as well.
3456 (stamp-tshlink): New target.
3457 (install): Skip stamp-tshlink during install.
3459 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * configure.in: Call AC_ARG_PROGRAM.
3462 * configure: Rebuild.
3463 * Makefile.in (program_transform_name): New variable.
3464 (install): Transform library name before installing it.
3466 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3468 * i960-dis.c (mem): Add HX dcinva instruction.
3470 Support for building as a shared library, based on patches from
3471 Alan Modra <alan@spri.levels.unisa.edu.au>:
3472 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3473 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3474 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3475 * configure: Rebuild.
3476 * Makefile.in (ALLLIBS): New variable.
3477 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3478 (COMMON_SHLIB, SHLINK): New variables.
3479 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3480 (STAGESTUFF): Remove variable.
3481 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3482 (stamp-piclist, piclist): New targets.
3483 ($(SHLIB), $(SHLINK)): New targets.
3484 ($(OFILES)): Depend upon stamp-picdir.
3485 (disassemble.o): Build twice if PICFLAG is set.
3486 (MOSTLYCLEAN): Add pic/*.o.
3487 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3488 (distclean): Remove pic and stamp-picdir.
3489 (install): Install shared libraries.
3490 (stamp-picdir): New target.
3492 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3494 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3495 Print unknown instruction as "unknown", rather than in hex.
3497 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3499 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3501 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3503 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3505 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3507 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3508 when necessary. From Ulrich Drepper
3509 <drepper@myware.rz.uni-karlsruhe.de>.
3511 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3513 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3514 sparc_num_opcodes. Update architecture enum values.
3515 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3516 (sparc_opcode_lookup_arch): New function.
3517 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3518 (sparc_opcodes): Add v9a shutdown insn.
3520 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3522 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3523 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3525 (print_insn_sparc64): Deleted.
3526 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3529 * sparc-opc.c (architecture_pname): Add v9a.
3531 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3533 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3534 incorrectly defined as 0x16 when it should be 0x15.
3535 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3536 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3537 excb (exception barrier) which is defined in the Alpha
3538 Architecture Handbook version 2.
3539 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3540 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3541 disassembled as or, for example.
3543 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3545 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3546 (_print_insn_mips): Change i from int to unsigned int.
3548 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3550 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3551 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3553 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3555 * i386-dis.c: Added Pentium Pro instructions.
3557 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3559 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3562 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3564 * sh-opc.h (sh_nibble_type): Added REG_B.
3565 (sh_arg_type): Added A_REG_B.
3566 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3568 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3570 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3572 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3574 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3576 * Makefile.in (distclean): Remove stamp-h. From Ronald
3577 F. Guilmette <rfg@monkeys.com>.
3579 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3581 From David Mosberger-Tang <davidm@azstarnet.com>:
3582 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3585 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3587 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3588 (sh_table): Added many SH3 opcodes.
3589 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3591 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3593 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3594 (subco,subco.): Mark this PPC, not PPCCOM.
3596 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3598 * configure: Rebuild with autoconf 2.7.
3600 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3602 * configure: Rebuild with autoconf 2.6.
3604 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3606 * configure.in: Sort list of architectures. Accept but do nothing
3607 for alliant, convex, pyramid, romp, and tahoe.
3609 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3611 * a29k-dis.c (print_special): Change num to unsigned int.
3613 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3615 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3618 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3620 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3621 * configure: Rebuilt.
3623 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3625 * configure.in: Add case for bfd_i860_arch.
3626 * configure: Rebuild.
3628 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3630 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3631 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3632 (NEXTDOUBLE): Likewise.
3633 (print_insn_m68k): Don't match fmoveml if there is more than one
3634 register in the list.
3635 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3637 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3639 * m68k-opc.c: Use #W rather than #w.
3640 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3642 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3644 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3645 and likewise for all the dbxx opcodes.
3647 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3649 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3651 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3653 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3654 the VR4100 specific instructions to the mips_opcodes structure.
3656 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3658 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3659 ugly Metrowerks bug in CW6, is fixed in CW7.
3661 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3663 * ppc-opc.c (whole file): Add flags for common/any support.
3665 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3667 * Makefile.in (BISON): Remove macro.
3668 (FLAGS_TO_PASS): Remove BISON.
3670 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3672 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3674 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3675 instructions that take no args by looking at the match mask.
3676 (print_insn_arg): Always print "%" before register names.
3677 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3678 [case '_']: Don't print "@#" before address.
3679 [case 'J']: Use "%s" as format string, not register name.
3680 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3682 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3684 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3687 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3689 From David Mosberger-Tang <davidm@azstarnet.com>
3691 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3692 (alpha_insn_set): added definitions for VAX floating point
3693 instructions (Unix compilers don't generate these, but handcoded
3694 assembly might still use them).
3696 * alpha-dis.c (print_insn_alpha): added support for disassembling
3697 the miscellaneous instructions in the Alpha instruction set.
3699 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3701 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3702 no longer create sysdep.h, sed ppc-opc.c to work around a
3703 serious Metrowerks C bug.
3704 * mpw-make.in: Remove.
3705 * mpw-make.sed: New file, used by mpw-configure to edit
3706 Makefile.in into an MPW makefile.
3708 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3710 * Makefile.in (maintainer-clean): New synonym for realclean.
3712 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3714 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3715 which use '0', '1', and '2' instead. Specify the proper size for
3716 a pmove immediate operand. Correct the pmovefd patterns to be
3717 moves to a register, not from a register.
3718 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3720 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3722 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3723 %psr, %wim, %tbr as F_NOTV9.
3725 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3727 * Makefile.in (Makefile): Just rebuild Makefile when running
3729 (config.h, stamp-h): New targets.
3730 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3731 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3732 rebuilding config.h.
3733 * configure: Rebuild.
3735 * mips-opc.c: Change unaligned loads and stores with "t,A"
3736 operands to use "t,A(b)".
3738 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3740 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3742 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3744 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3745 until 3 instead of until 2.
3747 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3749 * Makefile.in (ALL_CFLAGS): Define.
3750 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3751 (MOSTLYCLEAN): Add config.log.
3752 (distclean): Don't remove config.log.
3753 * configure.in: Substitute HDEFINES.
3754 * configure: Rebuild.
3756 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3758 * sh-opc.h (sh_arg_type): Add F_FR0.
3759 (sh_table, case fmac): Add F_FR0 as first argument.
3761 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3763 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3765 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3767 * sparc-dis.c: Remove all references to NO_V9.
3769 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3771 * aclocal.m4: Just include ../bfd/aclocal.m4.
3772 * configure: Rebuild.
3774 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3776 * sparc-dis.c (X_DISP19): Define.
3777 (print_insn, case 'G'): Use it.
3778 (print_insn, case 'L'): Sign extend displacement.
3780 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3782 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3783 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3784 host_makefile_frag or frags.
3785 * aclocal.m4: New file.
3786 * configure: Rebuild.
3787 * Makefile.in (INSTALL): Set to @INSTALL@.
3788 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3789 (INSTALL_DATA): Set to @INSTALL_DATA@.
3791 (AR_FLAGS): Set to rc rather than qc.
3792 (CC): Define as @CC@.
3793 (CFLAGS): Set to @CFLAGS@.
3794 (@host_makefile_frag@): Remove.
3795 (config.status): Remove dependency upon @frags@.
3797 * configure.in: ../bfd/config.bfd now just sets shell variables.
3798 Use them rather than looking through target Makefile fragments.
3799 * configure: Rebuild.
3801 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3803 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3805 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3807 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3808 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3811 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3812 (lookup_{name,value}): New functions.
3813 (prefetch_table): New static local.
3814 (sparc_{encode,decode}_prefetch): New functions.
3815 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3817 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3819 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3822 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3824 * sh-dis.c: Correct comment on first line of file.
3826 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3828 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3830 * sparc-opc.c (asi, membar): New static locals.
3831 (sparc_{encode,decode}_{asi,membar}): New functions.
3832 (sparc_opcodes, membar insn): Fix.
3833 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3834 Support decoding of membar masks.
3837 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3839 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3841 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3843 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3844 and likewise for the other branches. Add bhs as an alias for bcc,
3845 and likewise for the size variants. Add dbhs as an alias for
3848 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3850 * sh-opc.h (FP sts instructions): Update to match reality.
3852 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3854 * m68k-dis.c: (fpcr_names): Add % before all register names.
3855 (reg_names): Likewise.
3856 (print_insn_arg): Don't explicitly print % before register names.
3857 Add % before register names in static array names. In case 'r',
3858 print data registers as `@(Dn)', not `Dn@'. When printing a
3859 memory address, don't print @# before it.
3860 (print_indexed): Change base_disp and outer_disp from int to
3861 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3862 syntax. Sign extend 8 byte displacement correctly.
3863 (print_base): Print using MIT syntax. Print zpc when appropriate.
3864 Change parameter disp from int to bfd_vma.
3866 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3869 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3871 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3872 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3873 * sh-opc.h (sh_arg_type): Add new operand types.
3874 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3876 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3878 * Makefile.in (distclean): Remove generated file config.h.
3880 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3882 * Makefile.in (distclean): Remove generated file config.h.
3884 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3886 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3888 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3890 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3891 rather than numopcodes. Use m68k_opcodes rather than removed
3892 opcode function. Don't check F_ALIAS.
3893 (print_insn_arg): Change first parameter to be const char *.
3894 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3895 (m68k-opc.o): New target.
3896 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3897 * configure: Rebuild.
3899 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3901 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3902 (opcode_bits, opcode_hash_table): New variables.
3903 (opcodes_initialized): Renamed from opcodes_sorted.
3904 (build_hash_table): New function.
3905 (is_delayed_branch): Use hash table.
3906 (print_insn): Renamed from print_insn_sparc, made static.
3907 Build and use hash table. If !sparc64, ignore sparc64 insns,
3908 and vice-versa if sparc64.
3909 (print_insn_sparc, print_insn_sparc64): New functions.
3910 (compare_opcodes): Move sparc64 opcodes to end.
3911 Print commutative insns with constant second.
3912 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3914 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3916 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3917 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3918 avoids printing a delay slot in a delay slot.
3919 * sh-opc.h (sh_table): Fully bracket last entry.
3921 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3923 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3925 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3927 * configure.in: Get host_makefile_frag from ${srcdir}.
3929 * configure.in: Autoconfiscated. Check for string[s].h. Create
3930 config.h from config.in. Don't set up sysdep.h link.
3931 * sysdep.h: New file.
3932 * configure, config.in: New files, generated from configure.in.
3933 * Makefile.in: Updated to be processed autoconf-style.
3934 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3935 (Makefile): Depend on config.status.
3936 (config.status): New rule.
3937 * configure.bat: Update Makefile substitutions.
3939 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3941 * mips-opc.c (L1): Define.
3942 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3943 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3946 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3948 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3949 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3950 have multiple add units but only a single logical unit.
3952 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3953 shifted by 18, without any insertion or extraction function.
3954 (insert_cr, extract_cr): Remove.
3956 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3958 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3961 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3963 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3964 * sh-opc.h: Add copyright.
3966 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3968 * Makefile.in (crunch-m68k): Delete extra target accidentally
3969 checked in a while ago.
3971 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3973 * sh-opc.h (sh_table): Add SH3 support.
3975 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3977 * sh-opc.h: Added bsrf and braf.
3979 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3981 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3982 bogus [ls]fm{ea,fd} patterns.
3984 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3985 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3986 initialize it from memory. Make function static.
3987 (print_insn_{big,little}_arm): New functions.
3988 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3989 the correct endianness.
3991 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3993 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3996 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3998 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3999 17th, so that it builds again using GCC as the compiler.
4001 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4003 * mips-dis.c (print_insn_little_mips): Cast return value from
4004 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4005 expects an unsigned long, and that might be fewer words of
4006 argument storage (e.g., if bfd_vma is long long on a 32-bit
4008 (print_insn_big_mips): Likewise with bfd_getb32 value.
4009 (_print_insn_mips): Now static.
4011 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4013 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4014 gcc memory hog problem with initializer is fixed.
4016 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4018 Merge in support for Mac MPW as a host.
4019 (Old change descriptions retained for informational value.)
4021 * mpw-config.in (archname): Compute from the config.
4022 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4024 * mpw-config.in (target_arch): Compute from canonical target.
4025 (m68k, mips, powerpc, sparc): Add architectures.
4026 * mpw-make.in (disassemble.c.o): Add.
4027 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4029 * mpw-config.in (BFD_MACHINES): Set to a default value.
4030 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4032 * mpw-make.in (CSEARCH): Add extra-include to search path.
4034 * mpw-config.in (varargs.h): Don't create.
4035 (sysdep.h): Create using forward-include.
4036 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4038 * mpw-config.in: New file, MPW version of configure.in.
4039 * mpw-make.in: New file, MPW version of Makefile.in.
4041 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4043 * alpha-dis.c (print_insn_alpha): Put empty statement after
4046 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4048 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4049 (low_sign_extend): Likewise.
4050 (get_field): Delete unused function.
4051 (set_field, deposit_14, deposit_21): Likewise.
4053 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4055 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4058 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4060 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4062 * alpha-opc.h (OSF_ASMCODE): define
4063 print pal-code names as defined in App C of the
4064 Alpha Architecture Reference Manual
4066 * alpha-dis.c: cleaned up output
4067 print stylized code forms as defined in App A.4.3 of the
4068 Alpha Architecture Reference Manual
4070 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4072 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4074 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4077 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4079 * m68k-dis.c (opcode): New function. Returns address of opcode
4080 table entry given index, even if the opcode table was split to
4081 work around gcc bugs.
4082 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4084 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4085 (reg_names): Now const.
4086 (print_insn_arg): Arrays cacheFieldName and names now const.
4087 (print_indexed): Array scales now const.
4089 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4091 * ppc-opc.c: Sort recently added instructions by minor opcode
4092 number within major opcode number.
4094 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4096 * hppa-dis.c: Include libhppa.h.
4098 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4100 * mips-opc.c: Change dli to use M_DLI, and add dla.
4102 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4104 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4106 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4108 * mips-opc.c: Add r4650 mul instruction.
4110 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4112 * mips-opc.c: Add uld and usd macros for unaligned double load and
4115 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4117 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4118 mfdcr, mtdcr, icbt, iccci.
4120 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4122 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4123 signed char fields to shorts, more portable.
4125 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4127 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4128 char fields as signed chars, since they may have negative values.
4130 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4132 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4133 (mycroft@netbsd.org).
4135 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4137 From "Logg, Ed" <elogg@ea.com>:
4138 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4139 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4142 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4144 * ppc-opc.c: Changes based on patch from David Edelsohn
4145 <edelsohn@mhpcc.edu>.
4146 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4149 (insert_tbr): New static function.
4150 (extract_tbr): New static function.
4151 (XFXFXM_MASK, XFXM): Define.
4152 (XSPRBAT_MASK, XSPRG_MASK): Define.
4153 (powerpc_opcodes): Add instructions to access special registers by
4154 name. Add mtcr and mftbu.
4156 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4158 * mips-opc.c (P3): Define.
4159 (mips_opcodes): Add mad and madu.
4161 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4163 * configure.in: Add W65 support.
4164 * disassemble.c: Likewise.
4165 * w65-opc.h, w65-dis.c: New files.
4167 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4169 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4172 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4174 * mips-opc.c: Add dli as a synonym for li.
4176 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4178 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4179 print something for reserved opcode values, even if it won't
4182 * mips-dis.c (_print_insn_mips): When initializing, shift right
4183 and mask, to avoid sign extension problems on the Alpha.
4185 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4188 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4190 * sh-opc.h (mov.l gbr): Get direction right.
4191 * sh-dis.c (print_insn_shx): New function.
4192 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4193 print opcodes with right byte order.
4195 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4197 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4198 to avoid conflicts with getopt.
4200 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4202 * hppa-dis.c (print_insn_hppa): Read the instruction using
4203 bfd_getb32, so that it works on a little endian or 64 bit host.
4204 Remove unused local variable op.
4206 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4208 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4209 addu does not work correctly if -mips3.
4211 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4213 * a29k-dis.c (print_special): Add special register names defined
4214 on 29030, 29040 and 29050.
4215 (print_insn): Handle new operand type 'I'.
4217 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4219 * Makefile.in (INSTALL): Use top level install.sh script.
4221 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4223 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4224 that it works on a little endian host.
4226 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4228 * configure.in: Use ${config_shell} when running config.bfd.
4230 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4232 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4234 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4236 * a29k-dis.c (print_insn): Print the opcode.
4238 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4240 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4242 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4244 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4246 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4248 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4249 which store a value into memory.
4251 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4253 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4254 * arm-dis.c, arm-opc.h: New files.
4256 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4258 * Makefile.in (ns32k-dis.o): Add dependency.
4259 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4260 string, not as array of chars.
4262 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4264 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4266 * sparc-opc.c: Added sparclite extended FP operations, and
4267 versions of v9 impdep* instructions permitting specification of
4270 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4272 * i960-dis.c (reg_names): Now const.
4273 (struct sparse_tabent): New type, copied from array type in mem
4275 (ctrl): Local static array ctrl_tab now const.
4276 (cobr): Local static array cobr_tab now const.
4277 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4278 static variable mem_tab no longer explicitly initialized. Changed
4279 mem_init to const array of struct sparse_tabent.
4280 (reg): Local static variable reg_tab no longer explicitly
4281 initialized. Changed reg_init to const array of struct
4283 (ea): Local static array scale_tab now const.
4285 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4288 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4290 * configure.bat: the disassember needs to be enabled for
4291 "objdump -d" to work in djgpp.
4293 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4295 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4296 (invalid_float): Enabled general version, doesn't require running
4297 on ns32k host. Changed to take char* argument, and test for
4298 explicitly specified sizes, instead of using sizeof() on host CPU
4300 (INVALID_FLOAT): Cast first argument.
4301 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4302 list_P032, list_M032): Now const.
4303 (optlist, list_search): Made appropriate arguments now point to
4305 (print_insn_arg): Changed static array of one-character-string
4306 pointers into a static const array of characters; fixed sprintf
4307 statement accordingly.
4309 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4311 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4312 from distribution. A ns32k-dis.c from a previous distribution has
4313 been brought up to date and supports the new interface.
4315 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4317 * configure.in: add bfd_ns32k_arch target support.
4319 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4320 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4322 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4324 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4327 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4329 * h8300-dis.c, mips-dis.c: Don't use true and false.
4331 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4333 * configure.in: Change --with-targets to --enable-targets.
4335 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4337 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4338 opcodes to the first instruction with that opcode, to speed
4339 disassembly of large files. From ralphc@pyramid.com (Ralph
4342 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4344 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4346 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4348 * configure.bat: update to latest makefile.in
4350 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4352 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4353 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4354 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4355 slot insn is in a delay slot.
4356 * z8k-opc.h: (resflg): Fix patterns.
4357 * h8500-opc.h Fix CR insn patterns.
4359 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4361 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4362 "cmpl" before POWER versions, so that gas -many uses them.
4364 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4366 * disassemble.c: New file.
4367 * Makefile.in (OFILES): Add disassemble.o.
4368 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4369 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4370 binutils/configure.in.
4372 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4373 opcode being examined.
4375 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4377 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4378 (insert_ral, insert_ram, insert_ras): New functions.
4379 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4380 RAS for store with update.
4382 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4384 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4385 (edelsohn@npac.syr.edu).
4387 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4389 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4392 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4394 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4396 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4398 * ppc-opc.c (powerpc_operands): The signedp field has been
4399 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4400 instead. Add new operand SISIGNOPT.
4401 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4402 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4403 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4406 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4408 * i386-dis.c (struct private): Renamed to dis_private. `private'
4409 is a reserved word for dynix cc.
4411 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4413 * configure.in: Change error message to refer to bfd/config.bfd
4414 rather than bfd/configure.in.
4416 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4418 * ppc-opc.c: Define POWER2 as short alias flag.
4419 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4422 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4424 * i960-dis.c (print_insn_i960): Don't read a second word for
4425 opcodes 0, 1, 2 and 3.
4427 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4429 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4431 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4433 * m68881-ext.c: Removed; no longer used.
4434 * Makefile.in: Changed accordingly.
4436 * m68k-dis.c (ext_format_68881): Don't declare.
4437 (print_insn_m68k): If an instruction uses place 'i', it uses at
4438 least four fixed bytes.
4439 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4440 extended float, convert to double using floatformat_to_double, not
4441 ieee_extended_to_double, and fetch the data before converting it.
4443 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4445 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4446 davidj@ICSI.Berkeley.EDU (David Johnson).
4448 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4450 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4451 PowerPC uses bdnz[l][a].
4453 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4455 * dis-buf.c, i386-dis.c: Include sysdep.h.
4457 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4459 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4461 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4462 by Motorola PowerPC 601 with PPC_OPCODE_601.
4463 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4464 Disassemble Motorola PowerPC 601 instructions as well as normal
4465 PowerPC instructions.
4467 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4469 * i960-dis.c (reg, mem): Just use a static array instead of
4472 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4474 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4475 condition name index if this is for a negated condition.
4477 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4478 Floating point format for 'H' operand is backwards from normal
4479 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4480 operands (fmpyadd and fmpysub), handle bizarre register
4481 translation correctly for single precision format.
4483 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4484 or 'I' operands if the next format specifier is 'M' (fcmp
4485 condition completer).
4487 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4489 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4490 single number giving a bitmask for the MB and ME fields of an M
4491 form instruction. Change NB to accept 32, and turn it into 0;
4492 also turn 0 into 32 when disassembling. Seperated SH from NB.
4493 (insert_mbe, extract_mbe): New functions.
4494 (insert_nb, extract_nb): New functions.
4495 (SC_MASK): Mask out SA and LK bits.
4496 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4497 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4498 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4499 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4500 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4501 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4502 (powerpc_macros): Define table of macro definitions.
4503 (powerpc_num_macros): Define.
4505 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4506 if PPC_OPERAND_NEXT is set.
4508 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4510 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4511 char. Retrieve contents using bfd_getl32 instead of shifting.
4513 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4515 * ppc-opc.c: New file. Opcode table for PowerPC, including
4516 opcodes for POWER (RS/6000).
4517 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4518 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4519 (CFILES): Add ppc-dis.c.
4520 (ppc-dis.o, ppc-opc.o): New targets.
4521 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4523 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4525 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4526 No space before 'u', 'f', or 'N'.
4528 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4530 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4531 farther than we should.
4533 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4535 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4537 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4539 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4541 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4542 needs it, to prevent reading past the end of a section.
4544 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4546 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4547 Removed t,A case for la; always use t,A(b) case.
4549 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4551 From Ted Lemen <mellon@pepper.ncd.com>
4552 * mips-dis.c (print_insn_arg): Handle 'k'.
4553 * mips-opc.c: Make cache use k, not t.
4555 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4557 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4558 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4559 FLOAT_FORMAT_CODE to put out floating point register names.
4561 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4563 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4565 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4569 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4571 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4572 larger than 32. Moved dsxx32 variants first for disassembler.
4574 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4576 * z8kgen.c, z8k-opc.h: Add full lda information.
4578 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4580 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4581 movb instructions. Any necessary space will be emitted by
4582 the code to handle nullification completers.
4584 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4586 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4588 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4590 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4591 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4593 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4595 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4597 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4599 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4600 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4602 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4604 * m88k-dis.c (m88kdis): comment change. Remove space after
4606 (printop): handle new arg types DEC and XREG for m88110.
4608 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4610 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4611 type for absolute branch addresses. Delete special
4612 "ble" and "be" code in 'W' operand code.
4614 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * mips-opc.c: Set hazard information correctly for branch
4617 likely instructions.
4619 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4621 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4622 info->fprintf_func for printing and info->print_address_func for
4625 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4627 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4629 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4631 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4632 Corrected second case of "b" for disassembler.
4634 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4636 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4637 to BFD swapping routines to correspond to BFD name changes.
4639 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4641 * mips-opc.c: Change div machine instruction to be z,s,t rather
4642 than s,t. Change div macro to be d,v,t rather than d,s,t.
4643 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4644 rem and remu which generates only the corresponding div
4645 instruction. This is for compatibility with the MIPS assembler,
4646 which only generates the simple machine instruction when an
4647 explicit destination of $0 is used.
4648 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4650 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4653 WR_31 hazard for bal, bgezal, bltzal.
4655 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4657 * hppa-dis.c (print_insn_hppa): Use print function
4658 from within the disassemble_info, not fprintf_filtered.
4660 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4662 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4663 Law, law@cs.utah.edu.)
4665 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4667 * mips-opc.c ("absu"): Removed.
4670 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4672 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4673 Changed hazard information to distinguish between memory load
4674 delays and coprocessor load delays.
4676 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4678 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4680 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4682 * configure.in: Don't pass cpu to config.bfd.
4684 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4686 * m88k-dis.c (m88kdis): Make class unsigned.
4688 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4690 * alpha-dis.c (print_insn_alpha): One branch format case was
4691 missing the instruction name.
4693 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4695 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4696 Add the arch-specific auxiliary files.
4697 (OFILES): Remove the arch-specific auxiliary files
4698 and use BFD_MACHINES instead of DIS_LIBS.
4699 * configure.in: Set BFD_MACHINES based on --with-targets option.
4701 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4703 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4706 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4708 * sparc-opc.c: Change CONST to const to deal with gcc
4709 -Dconst=__const -traditional.
4711 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4714 coprocessor instructions out of #if 0, and made them use new
4717 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4719 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4721 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4723 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4724 instruction, for use by the disassembler.
4726 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4727 hand-coded sign extensions that depended on 32-bit host ints.
4728 FIXME, we still depend on big-endian host bitfield ordering.
4729 (sparc_print_insn): Set the insn_info_valid field, and the
4730 other fields that describe the instruction being printed.
4732 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4734 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4735 `jmp' instead of just one of them.
4737 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4739 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4740 (fput_fp_reg_r): Renamed from fput_reg_r.
4741 (fput_fp_reg): New function.
4742 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4744 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4746 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4748 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4750 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4752 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4753 don't output a space.
4755 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4757 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4759 * mips-opc.c: New file, containing opcode table from
4760 ../include/opcode/mips.h.
4761 * Makefile.in: Add it.
4763 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4765 * m88k-dis.c: New file, moved in from gdb and changed to use the
4766 new dis-asm.h disassembler interface.
4767 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4768 (m88k-dis.o): New target.
4770 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4772 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4773 argument string const char * to correspond to opcode/mips.h.
4775 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4777 * mips-dis.c: Updated to account for name changes in new version
4779 * Makefile.in: Added header file dependencies.
4781 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4783 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4785 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4787 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4788 extend, rather than shifts.
4790 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4792 * Makefile.in: Undo 15 June change.
4794 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4796 * m68k-dis.c (print_insn_arg): Change return value to byte count
4798 * m68k-dis.c: Re-write to detect invalid operands before
4799 printing anything, so we can handle this the same way we
4800 handle invalid opcodes.
4802 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4804 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4806 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4808 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4811 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4813 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4815 * configure.in: Do make sysdep.h link.
4816 * Makefile.in: Search ../include. Don't search ../bfd.
4818 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4820 Changes from Jeff Law, law@cs.utah.edu:
4821 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4822 Do not print a space before the completers specified by
4825 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4827 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4828 defined, since gdb has been fixed.
4830 Changes from Jeff Law, law@cs.utah.edu:
4831 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4832 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4833 be a *disassemble_info, not a *FILE.
4834 * hppa-dis.c: Support 'd', '!', and 'a'.
4835 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4836 * hppa-dis.c: Delete cases which are no longer needed.
4838 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4840 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4842 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4844 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4847 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4849 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4850 * configure.in: No longer need to configure to get sysdep.h.
4852 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4854 * Patches from Jeffrey Law <law@cs.utah.edu>.
4855 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4856 templates for 1.1 FP computational instructions.
4858 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4860 * h8500-dis.c (print_insn_h8500): Address argument is type
4862 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4865 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4866 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4868 * sparc-dis.c (compare_opcodes): Move static declaration to
4871 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4873 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4874 instruction, remove unimp hack from 'l' argument.
4876 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4878 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4881 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4883 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4884 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4887 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4889 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4890 arrays of string pointers to 2-d arrays of chars, to save
4893 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4895 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4896 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4898 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4900 * hppa-dis.c: New file from Utah, adapted to new disassembler
4902 * Makefile.in: Include it.
4904 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4906 * sh-dis.c, sh-opc.h: New files.
4908 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4910 * alpha-dis.c, alpha-opc.h: New files.
4912 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4914 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4917 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4919 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4921 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4923 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4926 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4928 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4929 and double percent signs a few places.
4931 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4933 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4934 Use info->print_address_func not print_address.
4936 * dis-buf.c (generic_print_address): New function.
4938 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4940 * Makefile.in: Add sparc-dis.c.
4941 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4943 Add `add' instruction to the set that get checked
4944 for a preceding `sethi' in order to print an absolute address.
4945 * (print_insn): Disassembly prefers real instructions.
4946 (is_delayed_branch): Speed up.
4947 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4948 Still missing some float ops, and needs testing.
4949 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4950 F_ALIAS. Use printf, not fprintf, when not passing a file
4952 (compare_opcodes): Check that identical instructions have
4953 identical opcodes, complain otherwise.
4956 * Include reg_names.
4958 Use dis-asm.h/read_memory_func interface.
4960 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4962 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4963 deliberately return non-zero to setjmp from longjmp. Otherwise
4964 this code fails to compile.
4966 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4968 * m68k-dis.c: Fix prototype for fetch_arg().
4970 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4972 * dis-buf.c: New file, for new read_memory_func interface.
4973 Makefile.in (OFILES): Include it.
4974 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4975 Use new read_memory_func interface.
4977 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4979 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4980 * h8500-opc.h: Fix couple of opcodes.
4982 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4984 * Makefile.in: add dvi & installcheck targets
4986 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4988 * Makefile.in: Update for h8500-dis.c.
4990 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4992 * h8500-dis.c, h8500-opc.h: New files
4994 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4996 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4997 ../include/dis-asm.h.
4998 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4999 and ../gdb/m68k-pinsn.c).
5000 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5001 and ../gdb/i386-pinsn.c).
5002 * m68881-ext.c: New file. Moved definition of
5003 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5004 * Makefile.in: Adjust for new files.
5005 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5006 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5007 can be dis-assembled.
5009 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5011 * mips-dis.c (print_insn_arg): Now returns void.
5013 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5015 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5016 files that use the macros.
5018 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5020 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5021 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5022 (CFILES): Added mips-dis.c.
5024 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5026 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5027 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5029 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5031 * Makefile.in: Improve *clean rules.
5032 * configure.in: Allow a default host.
5034 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5036 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5037 files include other sysdep files
5039 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5041 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5043 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5045 * configure.in: For host support, use ../bfd/configure.host
5046 so it stays in sync with the ../bfd/hosts database.
5048 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5050 * configure.in: use cpu-vendor-os triple instead of nested cases
5052 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5054 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5055 *always* the wrong one.
5057 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5059 * z8kgen.c: added copyright info
5061 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5063 * z8k-dis.c (unparse_instr): prettier tabs
5064 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5066 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5068 * configure.in: Add ncr* configuration.
5069 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5070 picayune ANSI compilers happy.
5072 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5074 * configure.in (i386): Make i386 and i486 synonymous for now.
5075 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5077 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5079 * Makefile.in (install): Fix typo.
5081 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5083 * Makefile.in (make): Remove obsolete crud.
5084 (sparc-opc.o): Avoid Sun Make VPATH bug.
5086 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5088 * Makefile.in: since there are no SUBDIRS, remove rule and
5089 references of subdir_do.
5091 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5093 * Makefile.in (install): Get the library name right here too.
5094 Don't install bfd.h, since it's unrelated to this library. No
5095 subdirs to recurse into, either.
5096 (CFILES): The source file has a .c suffix, not .o.
5098 * sparc-opc.c: New file, moved from BFD.
5099 * Makefile.in (OFILES): Build it.
5101 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5103 * z8k-dis.c: fixed forward refferences of some declarations.
5105 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5107 * Makefile.in: get the name of the library right
5109 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5111 * z8k-dis.c: knows how to disassemble z8k stuff
5112 * z8k-opc.h: new file full of z8000 opcodes
5116 version-control: never
projects / platform / upstream / binutils.git / blob