1 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
3 * alpha-dis.c (print_insn_alpha): Use the machine type to
4 decide which PALcode set to include.
6 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
8 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
10 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
12 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
13 MSUB and MSUBS instructions.
16 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
18 * mips-opc.c: Insert contents of vu0.h, rather than including it.
20 * Makefile.am: Rebuild dependencies.
24 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
26 * ppc-opc.c (powerpc_operands): Omit parens around additions in
29 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
31 start-sanitize-coldfire
32 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
33 ColdFire, as below for mulsl and mulul.
36 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
37 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
38 +, -, and d for ColdFire.
40 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
41 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
42 (extract_mbe): Likewise.
44 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
46 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
48 * m10300-opc.c: First cut at UDF instructions.
50 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
52 * m32r-opc.c: Regenerate (remove semantic descriptions).
55 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
57 * arm-dis.c (print_insn_big_arm): Fix indentation.
58 (print_insn_little_arm): Likewise.
62 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
64 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
66 (print_insn_little_arm): Likewise.
69 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
71 Move all global state data into opcode table struct, and treat
72 opcode table as something that is "opened/closed".
73 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
74 (cgen_asm_init): Delete.
75 (cgen_set_parse_operand_fn): New function.
76 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
77 (cgen_dis_init): Delete.
78 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
79 (cgen_current_{opcode_table_mach,endian}): Delete.
81 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
82 * cgen-dis.in (all fns): Ditto.
83 * cgen-opc.in (all fns): Ditto.
85 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
88 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
90 * cgen-dis.in (print_normal): Split into two.
91 (print_address): New function.
92 (extract_insn_normal): Clarify insn_value arg.
93 (print_int_insn): Renamed from print_insn.
94 (print_insn): New arg.
95 (print_insn_@arch@): Open opcode table if not already done so.
96 Move reading of insn into print_insn.
99 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
101 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
105 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
107 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
108 accept an accumulator choice.
109 * m32r-opc.c,m32r-opc.h: Regenerate.
112 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
114 * m10300-opc.c: Add entries for "no_match_operands" field in
118 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
120 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
124 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
126 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
129 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
131 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
133 * m10300-opc.c: Add autoincrement memory loads/stores.
137 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
139 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
140 phmsubh respectively.
143 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
145 start-sanitize-cygnus
146 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
148 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
149 @arch_cgen_get_int_operand.
150 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
151 Update call to @arch@_cgen_insert_operand.
152 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
153 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
154 (extract_insn_normal): New arg `pc', callers updated.
155 Update call to @arch@_cgen_extract_operand.
156 (print_insn): Update call to CGEN_EXTRACT_FN.
158 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
161 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
163 * m10300-opc.c: Fix load to sp and store from sp for the am33.
164 Add more multimedia instructions.
166 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
168 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
173 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
175 * mips-opc.c (pref): Enabled for the r5900.
178 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
180 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
182 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
184 (OP_J): Remove unnecessary subtraction when 16-bit displacement
185 will be masked later.
188 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
190 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
193 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
195 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
196 from raw register #s to symbolic names to make debugging easier.
199 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
201 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
203 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
205 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
206 start-sanitize-cygnus
207 * Makefile.am (CGENDIR): Set via configure.
208 (CGEN): New variable.
209 (CGENFILES): object.scm renamed to cos.scm.
210 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
211 (stamp-m32r): Pass prefix to run-cgen.
212 * Makefile.in: Regenerate.
213 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
214 * cgen-dis.in: Ditto.
215 * cgen-opc.in: Ditto.
216 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
217 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
218 * configure: Regenerate.
222 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
224 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
226 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
228 * m10300-opc.c: Reorder more instructions so that we do not
229 accidentally match a mn10300 instruction when we really
230 wanted an am33 instruction.
233 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
235 * m10300-dis.c: Only recognize instructions from the currently
237 * m10300-opc.c: Add field indicating the particular variant of
238 the mn10300 each instruction is available on.
240 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
242 * configure.in: For bfd_vax_arch, build vax-dis.lo.
243 * Makefile.am: Rebuild dependencies.
244 (CFILES): Add vax-dis.c.
245 (ALL_MACHINES): Add vax-dis.lo.
246 * aclocal.m4: Rebuild with current libtool.
247 * configure, Makefile.in: Rebuild.
249 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
251 * vax-dis.c: New file, from work by Pauline Middelink
252 <middelin@polyware.iaf.nl>.
253 * disassemble.c (ARCH_vax): Define if ARCH_all.
254 (disassembler): Add case for ARCH_vax.
255 * makefile.vms: Support compilation on vms/vax.
258 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
260 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
261 the DVP_OPERAND_RELOC_11_S4 relocation.
265 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
267 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
269 (disassemble): Correctly handle FMT_D10 instructions.
271 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
272 am33 shift instructions.
274 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
276 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
277 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
279 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
280 (mn10300_opcodes): Reorder so as to try and select opcodes from
281 the core chip when multiple alternatives exist. Change several
282 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
283 "macbu" instructions. Fix typos in a couple DSP instructions too.
286 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
288 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
289 related to sign extension and the size of ints.
291 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
293 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
294 instructions. Support (sp) addressing mode by expanding it into
298 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
300 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
301 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
302 be used as immediate values.
306 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
308 * m10300-opc.c: Support 4 byte DSP instructions.
311 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
313 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
316 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
318 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
321 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
323 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
326 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
328 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
329 found on the mn10300.
332 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
334 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
337 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
339 * mips-dis.c (print_insn_little_mips): Previously, instruction
340 printing references the symbol table to determine whether the
341 instruction resides in a block regular instructions or mips16
342 instructions. However, when the disassembler gets used in other
343 environments where the symbol table is not present, we no longer
344 rely in the symbol table, rather, use the low bit of the
345 instructions address to guess. There should be no change for usage
346 of the disassembler in host based programse, gdb ,objdump.
347 (print_insn_big_mips): ditto.
348 (print_insn_mips): ditto
350 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
352 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
354 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
357 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
358 operands for the am33.
359 (mn10300_opcodes): Add new instructions from the am33.
361 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
363 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
365 * i386-dis.c (index16): Add '%' to register names. Use ','
368 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
370 * i386-dis.c: Don't print opcode suffix when we can figure out the
371 size (and gas can!) by register operands, or from the default
373 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
375 (dis386, dis386_twobyte, grps): Use new suffix macros.
376 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
377 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
378 order of cmps operands to agree with Intel docs. Correct operand
379 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
380 agree with Intel docs.
381 (print_insn_x86): Print orphan fwait before other prefixes.
382 Return correct byte count for orphan fwait with prefixes. Don't
383 print `bound' operands in reverse order.
384 (ckprefix): Stop accumulating prefixes if we get fwait.
385 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
387 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
389 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
390 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
392 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
394 Fix problems when bfd_vma is wider than long.
395 * i386-dis.c: Make op_address and start_pc unsigned.
396 (set_op): Make parameter unsigned.
397 (print_insn_x86): Cast to bfd_vma when passing a value to
399 * ns32k-dis.c (CORE_ADDR): Don't define.
400 (print_insn_ns32k): Change type of addr to bfd_vma. Use
401 bfd_scan_vma to read back address.
402 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
404 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
405 (NEXTULONG): New definition.
406 (print_insn_m68k): Avoid overflow when computing third argument of
408 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
409 Use disp instead of val to store offset values.
410 (print_indexed): Use base_disp instead of word to store base
411 displacement, to avoid overflow.
412 * m10300-dis.c (disassemble): Cast value to long when computing
413 pc-relative address, to get correct sign extension.
415 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
417 * m32r-opc.c: Regenerate.
419 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
421 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
422 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
424 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
426 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
428 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
430 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
432 (OP_DSreg): Rename from OP_DSSI.
433 (OP_ESreg): Rename from OP_ESDI.
434 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
436 (append_seg): Rename from append_prefix.
437 (ptr_reg): New function.
438 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
440 (PREFIX_ADDR): Rename from PREFIX_ADR.
441 (float_reg): Add non-broken opcodes for people who don't want
444 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
446 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
449 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
451 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
453 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
455 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
456 0; produce error message for shifts of size 32 (or 64 for 64-bit
457 shifts), because the hardware doesn't support them.
460 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
462 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
465 * vu0.h (sqc2): Fix opcode.
467 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
471 start-sanitize-cygnus
472 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
474 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
475 Change pinfo to use WR_HILO.
478 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
480 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
481 LONG_2, LONG_2b formats to use this new operand.
483 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
485 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
487 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
489 * sparc-dis.c (print_insn_sparc): big endian instruction / little
492 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
494 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
495 and SHORT_B3b formats to use Rb instead of Ra.
497 Add FLAG_MUL16 to MUL2XH opcode.
499 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
500 to existing 1.1.1 parallelisation prohibition procedure.
502 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
504 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
505 * cgen-dis.in (extract_normal): Likewise.
506 * m32r-asm.c,m32r-dis.c: Regenerate.
509 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
511 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
515 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
517 * mips-opc.c (multu1): Add two operand variant for the r5900.
520 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
522 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
523 with a shift count of 0.
526 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
528 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
530 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
532 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
533 (_print_insn_mips): Likewise.
534 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
538 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
540 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
541 (cgen_hw_lookup_by_num): New function.
544 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
547 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
549 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
551 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
553 * sparc-dis.c (print_insn_sparc): Always fetch instructions
554 as big-endian on SPARClite.
557 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
559 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
561 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
565 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
567 * d30v-opc.c (pre_defined_register): Remove alias for r0.
570 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
572 * mips-opc.c (break): Added 20-bit single-operand break
573 instruction for R5900 only.
576 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
578 * po/Make-in (install-info): New target.
580 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
582 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
583 * configure: Rebuild.
585 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
587 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
588 variety of ISA2 instructions to set bottom ten bits of trap code.
590 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
592 * Makefile.am (config.status): Add explicit target so that
593 config.status depends upon bfd/configure.in.
594 * Makefile.in: Rebuild.
596 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
598 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
599 instructions to set bottom ten bits of break code.
600 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
601 for above optional argument.
603 start-sanitize-cygnus
604 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
606 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
607 * m32r-opc.h: Regenerate.
610 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
612 * makefile.vms: Run dec c with /nodebug.
614 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
616 * Makefile.in: Rebuilt.
617 * Makefile.am: Regenerated dependencies with mkdep.
619 * opintl.h (_): Define as dgettext.
621 start-sanitize-cygnus
622 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
624 * configure.in: Add support for --enable-cgen-maint.
625 * Makefile.am (M32R_DEPS): New variable.
626 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
627 * aclocal.m4: Regenerate.
628 * Makefile.in: Regenerate.
629 * configure: Regenerate.
631 * Makefile.am (CGENFILES): Add minsn.scm.
634 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
636 * cgen-asm.c: Internationalised.
637 start-sanitize-cygnus
638 * cgen-asm.in: Internationalised.
639 * cgen-opc.in: Internationalised.
641 * m32r-asm.c: Internationalised.
642 * m32r-dis.c: Internationalised.
643 * m32r-opc.c: Internationalised.
645 * aclocal.m4: Regenerated.
646 * configure: Regenerated.
647 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
648 * Makefile.in: Rebuild.
649 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
650 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
652 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
654 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
656 * aclocal.m4, configure: Rebuild with current tools.
658 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
660 * opintl.h: New file - contains internationalisation macros used
661 by source files in this directory.
662 * po/: New subdirectory - contains internationalisation files.
663 * po/Make-in: New file - Makefile constructor.
664 * po/POTFILES.in: New file - list of files in opcodes directory
665 that should be scan for internationalisation macros.
666 * po/opcodes.pot: New file - list of internationisation strings
667 found in files mentioned in po/POTFILES.in.
668 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
669 entry. Add intl directory to include paths.
670 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
671 HAVE_STRCPY, HAVE_LC_MESSAGES
672 * configure.in: Add rule to build Makefile in po subdirectory.
673 * Makefile.in: Rebuilt.
674 * aclocal.m4: Rebuilt.
675 * config.in: Rebuilt.
676 * configure: Rebuilt.
677 * alpha-opc.c: Internationalised.
678 * arc-dis.c: Internationalised.
679 * arc-opc.c: Internationalised.
680 * arm-dis.c: Internationalised.
681 * cgen-asm.c: Internationalised.
682 * d30v-dis.c: Internationalised.
683 * dis-buf.c: Internationalised.
685 * dvp-dis.c: Internationalised.
686 * dvp-opc.c: Internationalised.
688 * h8300-dis.c: Internationalised.
689 * h8500-dis.c: Internationalised.
690 * i386-dis.c: Internationalised.
691 * m10200-dis.c: Internationalised.
692 * m10300-dis.c: Internationalised.
693 * m68k-dis.c: Internationalised.
694 * m88k-dis.c: Internationalised.
695 * mips-dis.c: Internationalised.
696 * ns32k-dis.c: Internationalised.
697 * opintl.h: Internationalised.
698 * ppc-opc.c: Internationalised.
699 * sparc-dis.c: Internationalised.
700 * v850-dis.c: Internationalised.
701 * v850-opc.c: Internationalised.
703 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
705 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
706 (asm_hash_table_entries): New variable.
707 (cgen_asm_init): Free asm_hash_table_entries.
708 (hash_insn_array,hash_insn_list): New functions.
709 (build_asm_hash_table): Use them. Hash macro insns as well.
710 (cgen_asm_lookup_insn): Update.
711 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
712 (dis_hash_table_entries): New variable.
713 (cgen_dis_init): Free dis_hash_table_entries.
714 (hash_insn_array,hash_insn_list): New functions.
715 (build_dis_hash_table): Use them. Hash macro insns as well.
716 (cgen_dis_lookup_insn): Update.
717 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
718 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
719 (cgen_macro_insn_count): New function.
720 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
721 All callers updated. Sanity check result of extract fn.
722 (@arch@_cgen_get_insn_operands): Change result type to void.
723 Delete args insn_value, length. New arg fields. All callers updated.
724 (@arch@_cgen_lookup_get_insn_operands): New function.
725 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
727 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
729 * i386-dis.c (OP_DSSI): Print segment override.
732 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
734 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
738 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
740 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
744 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
746 * vu0.h (vlqd, vlqi): Update per revised specs.
750 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
752 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
753 (vif_operands): Update.
754 (vif_get_unpackloc): Delete.
755 (state_vif_unpackloc{,_star_p}): Delete.
756 (dvp_opcode_init_parse): Update.
757 (vif_unpack_len_value): Avoid divide by zero.
761 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
763 * vu0.h: Specs changed for VCALLMSR bit pattern.
764 * mips-dis.c: (print_insn_arg) Matching change.
767 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
769 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
772 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
774 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
775 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
776 * configure.in: Define and substitute WIN32LDFLAGS and
778 * aclocal.m4: Rebuild with new libtool.
779 * configure, Makefile.in: Rebuild.
782 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
784 * vu0.h: Corrected bit pattern for VMAXI opcode.
787 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
789 * m32r-opc.c: Regenerate.
792 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
794 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
795 (dvp_expand_macro): Implement.
796 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
797 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
800 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
802 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
803 before trying to copy it.
804 * Makefile.in: Rebuild.
806 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
808 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
811 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
813 * m32r-opc.c: Fix bit patterns for SAT and SATB.
816 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
818 * ns32k-dis.c (bit_extract_simple): New function to extract bits
819 from an arbitrary valid buffer instead of fetching them on demand
821 (invalid_float): use bit_extract_simple() instead of bit_extract().
824 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
826 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
827 * m32r-opc.h: Add extra control registers.
830 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
832 From H.J. Lu <hjl@gnu.org>:
833 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
836 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
838 * Branched binutils 2.9.
840 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
842 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
843 disassembling last 4 bytes of a section.
845 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
847 Fix some gcc -Wall warnings:
848 * arc-dis.c (print_insn): Add casts to avoid warnings.
849 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
850 * d10v-dis.c (dis_long, dis_2_short): Likewise.
852 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
853 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
854 (parse_bc, parse_vfreg, parse_accdest): Likewise.
855 (parse_ffstreg, parse_vif_mode): Likewise.
857 * m10200-dis.c (disassemble): Likewise.
858 * m10300-dis.c (disassemble): Likewise.
859 * ns32k-dis.c (print_insn_ns32k): Likewise.
860 * ppc-opc.c (insert_ral, insert_ram): Likewise.
861 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
862 * cgen-opc.c (cgen_keyword_search_next): Likewise.
863 * d10v-dis.c (dis_long, dis_2_short): Likewise.
864 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
866 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
867 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
868 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
870 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
872 * tic80-dis.c (print_one_instruction): Likewise.
874 * w65-dis.c (print_operand): Likewise.
875 * z8k-dis.c (fetch_data): Likewise.
876 * a29k-dis.c: Add return type for find_byte_func_type.
877 * arc-opc.c: Include <stdio.h>. Remove declarations of
878 insert_multshift and extract_multshift.
879 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
881 (extract_value): Fully parenthesize expression.
883 * dvp-opc.c: Include <ctype.h>.
884 (print_sdest): Add default case to switch.
886 * h8500-dis.c (print_insn_h8500): Initialize local variables.
887 * h8500-opc.h (h8500_table): Fully bracket initializer.
888 * w65-opc.h (optable): Likewise.
889 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
890 * i386-dis.c (OP_E): Initialize local variables.
891 * m10200-dis.c (print_insn_mn10200): Likewise.
892 * mips-dis.c (print_insn_mips16): Likewise.
893 * sh-dis.c (print_insn_shx): Likewise.
894 * v850-dis.c (print_insn_v850): Likewise.
895 * ns32k-dis.c (print_insn_arg): Declare.
896 (get_displacement, invalid_float): Declare.
897 (list_search, sign_extend, flip_bytes): Declare return type.
898 (get_displacement): Likewise.
899 (print_insn_arg): Likewise. Make d int. Fix sprintf format
901 (print_insn_ns32k): Make i unsigned.
902 (invalid_float): Make static. Declare type of val.
903 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
904 on each for iteration.
905 * tic30-dis.c (get_indirect_operand): Likewise.
906 * z8k-dis.c (print_insn_z8001): Declare return type.
907 (print_insn_z8002): Likewise.
908 (unparse_instr): Fix sprintf format strings.
910 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
912 * mips-opc.c: Add "sync.l" and "sync.p".
915 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
917 * dvp-opc.c (extract_vif_datalen): Rewrite.
918 (vif_insn_len): Perform 0->max+1 conversion for direct length.
920 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
922 * dvp-dis.c (print_insn): Print unpack address in hex.
923 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
924 Don't skip over '*', just record it.
925 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
926 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
927 Don't skip over '*', just record it.
928 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
929 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
930 (vif_opcodes): Likewise.
931 (state_vif_{mpg,unpack}loc_star_p): New static locals.
932 (vif_macros,vif_macro_count): New globals.
933 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
934 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
935 (vif_get_wl_cl): New function.
936 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
939 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
941 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
942 default m68k variant to recognize.
944 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
945 (ctrl, cobr, mem, ea): Likewise.
946 (print_addr): Likewise. Remove cast.
947 (ea): Cast argument of print_addr to bfd_vma.
949 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
951 (cgen_parse_unsigned_integer): Likewise.
952 (cgen_parse_address): Likewise.
954 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
956 * i960-dis.c (ctrl): Add full braces to structure initialization.
957 (cobr, mem, reg): Likewise.
958 (ea): Correct parenthesization in expression.
960 * cgen-asm.c: Include <ctype.h>.
961 (build_asm_hash_table): Remove unused local variable i.
962 (cgen_parse_keyword): Add casts to avoid warnings.
964 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
965 symbol. Fix indentation.
966 (print_insn_little_arm): Likewise.
969 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
971 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
976 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
978 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
983 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
985 * dvp-opc.c (vif_operand_datalen_special): New global.
989 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
991 * vu0.h (vcallms): Use 'O' for call target operand.
992 * mips-dis.c (print_insn_arg): Handle 'O'.
995 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
997 * configure.in: Use AM_DISABLE_SHARED.
998 * aclocal.m4, configure: Rebuild with libtool 1.2.
1000 start-sanitize-r5900
1001 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1003 * mips-dis.c: Change '%' to '#' in r5900 support.
1007 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1009 These patches are courtesy of Jonathan Walton and Tony Thompson
1010 (athompso@cambridge.arm.com).
1012 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1015 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1016 both the offset and the label closest to the destination.
1018 start-sanitize-r5900
1019 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1021 * vu0.h: New file with cop2/vu0 instructions.
1022 * mips-opc.c: Include vu0.h.
1023 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1025 (print_insn_mips): Do not emit a tab after an instruction if the
1026 first arg is an instruction completer (&). If the next arg is an
1027 escape character (%), then print the next arg verbatim.
1028 * Makefile.am (mips-opc.lo): Depend on vu0.h
1032 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1034 * dvp-opc.c (vif_opcodes): Add stcycl.
1036 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1038 * dvp-dis.c (print_dma): Change length from 16 to 8.
1041 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1043 * m32r-opc.h: Regenerate.
1046 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1048 * dvp-opc.c (print_dest1): Print dest spec again.
1049 (print_vfreg,print_accdest): Likewise.
1050 (vif_unpack_len): Round result up to word boundary.
1053 start-sanitize-vr4320
1054 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1056 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1058 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1060 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1065 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1067 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1068 (print_insn): Do mask comparison on proper opcode word.
1069 Print unsigned values in hex.
1070 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1071 (parse_bc): Catch missing dest.
1072 (parse_vfreg): Replace atoi call with strtol.
1073 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1074 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1075 (extract_gif_eop): New function.
1076 (gif_operands): Update eop entry.
1077 (VGIFOP,VGIFNREGS): Fix calcs.
1078 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1079 (gif_regs): Add entry for unused 11 case.
1080 (print_gif_regs): Print empty list instead of nothing.
1081 (extract_gif_nloop): Fix value calc.
1082 (print_gif_nloop): Always print value, even if 0.
1083 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1084 (vif_operands): Use them for wl,cl fields.
1085 (state_vif_wl,state_vif_cl): New static locals.
1086 (parse_vif_mode): Handle numeric args.
1087 (vif_unpack_len_value,vif_unpack_len): New functions.
1088 (vif_insn_len): Call vif_unpack_len.
1091 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1093 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1095 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1097 * cgen-asm.in: Move insertion of generated routines to top of file.
1098 (insert_normal): Add prototype. Delete `shift' arg.
1099 * cgen-dis.in: Move insertion of generated routines to top of file.
1100 (extract_normal): Add prototype. Delete `shift' arg.
1101 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1102 (print_keyword): Add prototype. Fix type of `attrs' arg.
1104 start-sanitize-vr4320
1105 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1107 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1108 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1111 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1113 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1114 assume that info->symbols is non-empty.
1116 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1118 * alpha-opc.c (cvtqs) There is no such thing.
1119 (cvttq): Missing most of the /*d variants.
1121 start-sanitize-r5900
1122 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1124 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1126 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1127 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1130 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1132 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1133 delayed branches or jumps.
1136 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1138 * dvp-opc.c (vif_operands): Add unpack[u] support.
1139 (vif_opcodes): Ditto.
1140 (*_vif_imrubits): Renamed from *_vif_imrbits.
1142 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1144 * dvp-dis.c (print_insn): Handle word number.
1145 Handle mips address vs vu address.
1146 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1147 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1148 ({insert,extract}_dma_addr): Fix word ofset.
1149 ({insert,print}_gif_regs): Fix encode/decode.
1152 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1154 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1156 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1157 * tic30-dis.c (print_branch): Likewise.
1159 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1160 * dvp-dis.c (dvp_info_mach_type): New function.
1161 (print_insn_dvp): Call it.
1162 (print_vif): Return length of 4 if mpg or direct insn so following
1163 insns get properly disabled.
1164 (print_gif): Fix word order.
1165 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1166 (gif_operands): Fix word order.
1167 (gif_opcodes): Likewise.
1168 ({insert,extract,print}_gif_regs): Likewise.
1169 (gif_regs): Add new register number/name changes.
1170 (dma_opcodes): Add dmarefe insn.
1173 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1175 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1176 saved_symbol code as it is no longer needed.
1178 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1180 * cgen-asm.c: Include symcat.h.
1181 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1183 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1186 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1188 * dvp-opc.c (extra_dma_flags): Fix typos.
1189 (dma_operands): Fix word numbers.
1190 (dma_opcodes): Likewise.
1191 ({insert,extract}_dma_flags): Likewise.
1194 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1196 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1199 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1201 * dvp-dis.c (print_gif): Complete.
1202 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1203 (state_gif_{nregs,regs,nloop}): New static locals.
1204 (*_gif_*): Complete.
1205 (dvp_opcode_init_{parse,print}): Init gif state locals.
1206 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1207 (vif_insn_len): Handle `unpack'.
1208 ({insert,extract}_dma_flags): Complete.
1211 start-sanitize-r5900
1212 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1214 * mips-opc.c (mula.s): Renamed from multa.s.
1217 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1219 * m32r-opc.[ch]: Regenerate.
1222 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1224 * dvp-opc.c (dma_operands): Rewrite.
1225 (dma_operand_{count,addr}): New globals.
1226 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1227 (insert_dma_addr): Insert value into insn.
1228 (extract_dma_addr): Extract value from insn.
1230 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1232 * dvp-dis.c (print_vu): Handle loi insns.
1233 (print_insn): Likewise.
1234 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1235 (vu_operands): Make LDEST1 a FAKE operand.
1236 (parse_dest1): Allow elided argument.
1237 (print_dest1): Don't print the argument.
1239 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1241 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1242 (print_vfreg): Don't print dest spec.
1243 (parse_accdest): Dest spec is optional.
1244 (print_accdest): Don't print dest spec.
1247 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1249 * Makefile.am (CGENFILES): Update.
1250 * Makefile.in: Regenerate.
1251 * cgen-asm.in (insert_normal): Result is error message now.
1252 Validate value to be inserted.
1253 (insert_insn_normal): Result is error message now.
1254 (@arch@_cgen_assemble_insn): Update.
1255 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1256 arguments. Don't perform validation here.
1257 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1259 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1261 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1262 operand instance list.
1263 * m32r-opc.c: Regenerate.
1265 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1267 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1268 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1270 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1272 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1274 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1276 * configure.in: Get the version number from BFD.
1277 * configure: Rebuild.
1279 From H.J. Lu <hjl@gnu.org>:
1280 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1281 * Makefile.in: Rebuild.
1283 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1285 * m32r-opc.c: Regenerate.
1286 * m32r-opc.h: Regenerate.
1288 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1290 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1291 Ignore ALIAS insns if asked to.
1292 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1293 * m32r-opc.c: Regenerate.
1296 * dvp.opc.c: Nicely format opcode tables.
1297 (vu_operands): New element UFLAGS.
1298 (parse_uflags,print_uflags): New functions.
1299 (vu_upper_opcodes): Add UFLAGS to all insns.
1302 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1304 Fix rac to accept only a0:
1305 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1306 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1307 Introduce OPERAND_GPR.
1308 * d10v-dis.c (print_operand): Likewise.
1310 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1312 * cgen-opc.in: New file.
1313 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1314 * Makefile.am (CGENFILES): Add cgen-opc.in.
1315 * Makefile.in: Regenerate.
1317 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1318 (cgen_hw_lookup): Make result const.
1320 * cgen-dis.in (*): Use PTR instead of void *.
1321 (print_insn): Delete unused vars `i', `syntax'.
1323 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1326 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1328 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1329 (vif_opcodes): Update renamed insns.
1330 * dvp-dis.c (*): Likewise.
1333 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1335 * configure, aclocal.m4: Rebuild with new libtool.
1337 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1339 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1340 instructions use a PC relative branch, not absolute.
1342 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1344 * configure.in: Set libtool_enable_shared rather than
1345 libtool_shared. Remove diversion hack.
1346 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1348 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1350 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1351 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1353 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1355 * tic30-dis.c: New file.
1356 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1357 * configure.in: Handle bfd_tic30_arch.
1358 * Makefile.am: Rebuild dependencies.
1359 (CFILES): Add tic30-dis.c
1360 (ALL_MACHINES): Add tic30-dis.lo.
1361 * configure, Makefile.in: Rebuild.
1363 start-sanitize-m32rx
1364 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1366 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1367 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1368 macwhi-a and macwlo-a instructions.
1372 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1374 * dvp-opc.c, fixed encoding of a bunch of instructions to
1375 be consistent with the asmvu assembler (and inconsistent
1376 with the specification).
1378 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1380 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1381 in the opcode table. The pkemscalf instruction must come first.
1383 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1385 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1388 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1390 * m32r-opc.h (HAVE_CPU_M32R): Define.
1393 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1395 * dvp-dis.c, dvp-opc.c: New files.
1396 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1397 * configure: Regenerate.
1398 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1399 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1400 (mips-dis.lo): Compile with @archdefs@.
1401 * Makefile.in: Regenerate.
1402 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1403 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1406 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1408 * v850-opc.c (insertion routines): If both alignment and size is
1409 wrong then report this.
1411 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1413 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1414 Only recognize instructions for the current target_processor.
1416 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1418 * d10v-dis.c (PC_MASK): Correct value.
1419 (print_operand): If there's a reloc, don't calculate the
1420 address because they could be in different sections.
1422 start-sanitize-cygnus
1423 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1425 * cgen.sh: Rewrite to be like simulator's version.
1426 * Makefile.am (cgen): Update call to cgen.sh.
1427 * Makefile.in: Regenerate
1430 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1432 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1433 instruction after the 4650's "mul" instruction; nobody's using the
1434 4010 these days. If object files someday indicate which processor
1435 variant they're intended for, we can do a better job at this.
1437 start-sanitize-r5900
1438 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1440 * mips-opc.c (c.lt.s): Add r5900 variant.
1444 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1446 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1447 table provided entry size. Use CGEN_INSN_MNEMONIC.
1448 (cgen_parse_keyword): Rewrite.
1449 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1450 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1451 * cgen-opc.c: Clean up pass over `struct foo' usage.
1452 (cgen_keyword_lookup_value): Handle "" entry.
1453 (cgen_keyword_add): Likewise.
1454 start-sanitize-cygnus
1455 * Makefile.am: Add cgen support.
1456 * Makefile.in: Regenerate.
1457 * configure.in: Add cgen support.
1458 * configure: Regenerate.
1459 * aclocal.m4: Regenerate.
1460 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1463 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1465 * mips-opc.c: Add FP_D to s.d instruction flags.
1467 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1469 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1471 start-sanitize-tic80
1472 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1474 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1475 PC relative offset forms before the 15 bit forms. An assembler command
1476 line option now chooses the default.
1479 start-sanitize-r5900
1480 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1482 * mips-opc.c: Add many missing r5900 instructions.
1485 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1487 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1488 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1490 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1492 * configure: Only build libopcodes shared if --enable-shared's value
1493 was `yes', or was set to `*opcodes*'.
1494 * aclocal.m4: Likewise.
1495 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1496 original source of this bit of code. It's not clear what the best fix
1499 start-sanitize-r5900
1500 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1502 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1504 start-sanitize-tic80
1505 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1507 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1508 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1509 offset forms before the 15 bit forms, to default to the long forms.
1512 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1514 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1516 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1518 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1519 symbol if none is present.
1520 (print_insn_big_arm): Prevent examination of stored symbol if
1523 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1525 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1527 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1529 * disassemble.c: Remove disasm_symaddr() function.
1531 * arm-dis.c: Use info->symbol instead of info->flags to determine
1532 if disassmbly should be in Thumb or Arm mode.
1534 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1536 * arm-dis.c: Add support for disassembling Thumb opcodes.
1537 (print_insn_thumb): New function.
1539 * disassemble.c (disasm_symaddr): New function.
1541 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1542 (thumb_opcodes): Table of Thumb opcodes.
1544 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1546 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1548 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1549 and 'v' as operand types.
1551 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1553 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1554 <olivier.carmona@di.epfl.ch>.
1555 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1556 which has a two word opcode with a one word argument.
1558 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1560 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1561 unsigned, not signed.
1562 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1564 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1566 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1567 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1568 (ftrv): Slay the cut-and-paste monster.
1570 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1572 * d10v-dis.c (print_operand):
1573 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1575 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1577 * d10v-opc.c (OPERAND_FLAG): Split into:
1578 (OPERAND_FFLAG, OPERAND_CFLAG) .
1582 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1584 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1585 field for all INSN_MACRO's.
1586 * mips16-opc.c: same
1588 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1590 * mips-opc.c (sync,cache): These are 3900 insns.
1592 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1594 sh-opc.h (sh_table): Remove ftst/nan.
1596 start-sanitize-cygnus
1597 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1599 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1600 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1602 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1606 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1608 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1609 Add tx49 insns and configury.
1612 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1614 * mips-opc.c (ffc, ffs): Fix mask.
1616 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1618 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1621 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1623 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1624 start-sanitize-cygnus
1625 Added VR5400 instructions.
1626 (N5): New cpu-id macro.
1628 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1630 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1632 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1633 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1635 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1637 * v850-dis.c (disassemble): Replace // with /* ... */
1639 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1641 * sparc-opc.c: Add wr & rd for v9a asr's.
1642 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1643 (v9a_asr_reg_names): New variable.
1644 Patch from David Miller <davem@vger.rutgers.edu>.
1646 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1648 * sparc-opc.c (v9notv9a): New insn type.
1649 (IMPDEP): Move to the end to not conflict with edge8 et al.
1650 Patch from David Miller <davem@vger.rutgers.edu>.
1652 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1654 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1656 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1658 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1660 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1662 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1663 of disassemble_info structure to determine if an overlay address
1664 has a matching symbol in low memory.
1666 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1667 new symbol_at_address_func field in disassemble_info structure.
1669 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1671 * v850-opc.c (extract_d22): Use signed arithmatic.
1673 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1675 * mips-opc.c: Three op mult is not an ISA insn.
1677 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1679 * mips-opc.c: Fix formatting.
1681 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1683 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1684 than assuming that char is signed. Explicitly sign extend 16 bit
1685 values, rather than assuming that short is 16 bits.
1686 (OP_sI, OP_J, OP_DIR): Likewise.
1688 start-sanitize-v850e
1689 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1695 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1697 * v850-opc.c: Fix typo in comment.
1699 * v850-dis.c (disassemble): Add test of processor type when
1700 determining opcodes.
1702 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1704 * configure.in: Use a diversion to set enable_shared before the
1705 arguments are parsed.
1706 * configure: Rebuild.
1708 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1710 * m68k-opc.c (TBL1): Use ! rather than `.
1711 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1713 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1715 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1717 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1719 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1722 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1723 * aclocal.m4: Rebuild with new libtool.
1724 * configure: Rebuild.
1726 start-sanitize-v850e
1727 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1729 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1732 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1734 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1736 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1738 * v850-opc.c (v850_opcodes): Further rearrangements.
1740 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1742 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1744 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1746 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1749 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1751 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1753 * mips16-opc.c: Added mips16 sdbbp.
1756 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1758 * v850-opc.c: Initialise processors field of v850_opcode structure.
1760 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1762 Merge changes from Martin Hunt:
1764 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1766 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1767 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1768 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1770 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1772 * d30v-dis.c (print_insn): First operand of d*i (delayed
1773 branch) instructions is relative.
1775 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1776 (d30v_operand_table): Add IMM6S3 type.
1777 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1779 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1780 and cmp instructions.
1782 * d30v-opc.c: Correct entries for repeat*, and sat*.
1783 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1784 types. Correct several formats.
1786 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1788 * d30v-opc.c (pre_defined_registers): Change control registers.
1790 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1791 SHORT_C2. Manual was incorrect.
1793 * d30v-dis.c (lookup_opcode): Return value now indicates
1794 if an opcode has a short and a long form. Used for deciding
1795 to append a ".s" or ".l".
1796 (print_insn): Append a ".s" to an instruction if it is
1797 the short form and ".l" if it is a long form. Do not append
1798 anything if the instruction has only one possible size.
1800 * d30v-opc.c: Change mulx2h to require an even register.
1801 New form: SHORT_A2; a SHORT_A form that needs an even
1802 register as the first operand.
1804 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1805 instruction was not being disassembled if there were an odd
1806 number of instructions.
1808 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1810 start-sanitize-v850e
1811 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1813 * v850-dis.c (disassemble): Improved display of register lists.
1816 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1818 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1819 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1820 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1821 fandnot1s, fandnot2s.
1823 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1825 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1827 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1829 * cgen-asm.c (cgen_parse_address): New argument resultp.
1830 All callers updated.
1831 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1833 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1835 * mn10200-dis.c (disassemble): PC relative instructions are
1836 relative to the next instruction, not the current instruction.
1838 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1840 * v850-dis.c (disassemble): Only signed extend values that are not
1841 returned by extract functions.
1842 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1844 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1846 * v850-opc.c: Update comments. Remove use of
1847 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1849 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1851 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1853 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1855 * configure: Rebuilt with latest devo autoconf for NT support.
1857 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1859 * v850-dis.c (disassemble): Use curly brace syntax for register
1862 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1863 where r0 is being used as a destination register.
1865 start-sanitize-v850e
1866 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1868 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1871 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1873 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1874 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1875 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1876 Add insns to access SGR and DBR.
1877 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1879 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1881 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1883 start-sanitize-v850e
1884 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1886 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1887 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1890 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1892 * configure (cgen_files): Add support for v850e target.
1893 * configure.in (cgen_files): Add support for v850e target.
1895 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1897 * configure (cgen_files): Add support for v850ea target.
1898 * configure.in (cgen_files): Add support for v850ea target.
1901 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1903 * configure.in (bfd_arc_arch): Add.
1904 * configure: Rebuild.
1905 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1906 * Makefile.in: Rebuild.
1907 * arc-dis.c, arc-opc.c: New files.
1908 * disassemble.c (ARCH_all): Define ARCH_arc.
1909 (disassembler): Add ARC support.
1911 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1913 start-sanitize-v850e
1914 * v850-dis.c (disassemble): Add support for v850EA instructions.
1916 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1917 (v850_opcodes): Add v850EA instructions.
1919 * v850-dis.c (disassemble): Add support for v850E instructions.
1921 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1922 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1923 insert_spe, extract_spe): New Functions.
1924 (v850_opcodes): Add v850E instructions.
1927 * v850-opc.c: Reorganised and re-layed out to improve readability
1930 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1932 * configure: Rebuild with autoconf 2.12.1.
1934 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1936 * aclocal.m4, configure: Rebuild with new automake patches.
1938 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1940 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1941 * acinclude.m4: Just include acinclude.m4 from BFD.
1942 * aclocal.m4, configure: Rebuild.
1944 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1946 * Makefile.am: New file, based on old Makefile.in.
1947 * acconfig.h: New file.
1948 * acinclude.m4: New file.
1949 * stamp-h.in: New file.
1950 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1951 Removed shared library handling; now handled by libtool. Replace
1952 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1953 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1954 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1955 handling in AC_OUTPUT.
1956 * dep-in.sed: Change .o to .lo.
1957 * Makefile.in: Now built with automake.
1958 * aclocal.m4: Now built with aclocal.
1959 * config.in, configure: Rebuild.
1961 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1963 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1965 start-sanitize-r5900
1966 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1968 * mips-opc.c: Fix coding of mtsa.
1971 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1973 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1975 * sparc-dis.c (sorted_opcodes): New static local.
1976 (struct opcode_hash): `opcode' is pointer to const element.
1977 (build_hash): First arg is now table of sorted pointers.
1978 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1979 (compare_opcodes): Update.
1981 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1983 * cgen-opc.c: #include <ctype.h>.
1984 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1985 Handle case insensitive hashing.
1986 (hash_keyword_value): Change type of `value' to unsigned int.
1988 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1990 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1991 precision FP, mark it as such. Likewise for double precision
1992 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1994 start-sanitize-r5900
1995 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1998 start-sanitize-r5900
1999 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2001 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2002 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2005 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2007 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2009 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2010 nesting depth when all the macros are expanded.
2012 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * sparc-opc.c: The fcmp v9a instructions take an integer register
2015 as a destination, not a floating point register. From Christian
2016 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2018 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2020 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2021 syntax. From Roman Hodek
2022 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2024 * i386-dis.c (twobyte_has_modrm): Fix pand.
2026 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2028 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2030 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2032 * arm-dis.c: Add prototypes for arm_decode_shift and
2035 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2037 * mips-opc.c: Add r3900 insns.
2039 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2041 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2042 print delay slot instructions on the same line. When using a PC
2043 relative load, add a comment with the value being loaded if it can
2046 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2048 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2049 to pushS/popS for segment regs and byte constant so that
2050 pushw/popw printed when in 16 bit data mode.
2052 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2053 print cbtw, cwtd in 16 bit data mode.
2054 * i386-dis.c (putop): extra case W to support above.
2056 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2057 address size prefix in 16 bit address mode.
2059 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2061 * sh-dis.c: Reindent. Rename local variable fprintf to
2064 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2066 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2068 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2070 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2072 * mips16-opc.c (mip16_opcodes): same.
2074 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2076 * m68k-opc.c (moveb): Change $d to %d.
2078 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2080 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2081 (twobyte_has_modrm): Likewise.
2083 (OP_MMX, OP_EM, OP_MS): New static functions.
2085 * i386-dis.c: Revert patch of April 4. The output now matches
2088 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2090 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2093 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2095 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2097 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2099 * Makefile.in (install): Depend upon installdirs.
2100 (installdirs): New target.
2102 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2104 From Thomas Graichen <graichen@rzpd.de>:
2105 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2106 * configure: Rebuild.
2108 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2110 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2111 Delete string{,s}.h support.
2113 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2115 * cgen-asm.c (cgen_parse_operand_fn): New global.
2116 (cgen_parse_{{,un}signed_integer,address}): Update call to
2117 cgen_parse_operand_fn.
2118 (cgen_init_parse_operand): New function.
2119 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2120 from cgen_asm_init_parse.
2121 (m32r_cgen_assemble_insn): New operand `errmsg'.
2122 Delete call to as_bad, return error message to caller.
2123 (m32r_cgen_asm_hash_keywords): #if 0 out.
2125 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2127 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2129 [case 'J']: Fix typo in register name.
2131 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2133 * configure.in: Substitute SHLIB_LIBS.
2134 * configure: Rebuild.
2135 * Makefile.in (SHLIB_LIBS): New variable.
2136 ($(SHLIB)): Use $(SHLIB_LIBS).
2138 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2140 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2142 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2144 * disassemble.c (disassembler): Handle m32r.
2146 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2148 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2149 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2150 * Makefile.in (CFILES): Add them.
2151 (ALL_MACHINES): Add them.
2152 (dependencies): Regenerate.
2153 * configure.in (cgen_files): New variable.
2154 (bfd_m32r_arch): Add entry.
2155 * configure: Regenerate.
2157 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2159 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2160 * configure: Rebuild.
2162 * Makefile.in: Rebuild dependencies.
2164 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2166 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2169 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2171 * Branched binutils 2.8.
2173 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2175 * m10200-dis.c: Rename from mn10200-dis.c.
2176 * m10200-opc.c: Rename from mn10200-opc.c.
2177 * m10300-dis.c: Rename from mn10300-dis.c
2178 * m10300-opc.c: Rename from mn10300-opc.c.
2179 * Makefile.in: Update accordingly.
2181 * mips16-opc.c: Add mul and dmul macros.
2183 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2185 * makefile.vms: Update CFLAGS, add clean target.
2187 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2189 * mips-opc.c: Add "wait". From Ralf Baechle
2190 <ralf@gnu.ai.mit.edu>.
2192 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2193 * configure, config.in: Rebuild.
2194 * sysdep.h: Include <stdlib.h> if it exists.
2195 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2197 * Makefile.in: Rebuild dependencies.
2199 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2201 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2202 Andrew Bray <andy@madhouse.demon.co.uk>.
2204 * mips-opc.c: Add cast when setting mips_opcodes.
2206 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2208 * v850-dis.c (disassemble): Fix sign extension problem.
2209 * v850-opc.c (extract_d*): Fix sign extension problems to make
2210 disassembly calculate branch offsets correctly.
2212 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2214 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2216 * mips-opc.c: Add dctr and dctw.
2218 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2220 * d30v-dis.c (print_insn): Change the way signed constants
2223 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2225 * Makefile.in (BFD_H): New variable.
2226 (HFILES): New variable.
2227 (CFILES): Add all C files.
2228 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2229 Delete old dependencies, and build new ones.
2230 * dep-in.sed: New file.
2232 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2234 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2236 start-sanitize-coldfire
2237 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2239 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2242 end-sanitize-coldfire
2243 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2245 * mn10200-opc.c: Change "trap" to "syscall".
2246 * mn10300-opc.c: Add new "syscall" instruction.
2248 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2250 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2251 mulul insns on the coldfire.
2253 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2256 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2257 (print_insn_little_arm): Likewise.
2259 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2261 Based on patches from H.J. Lu <hjl@lucon.org>:
2262 * i386-dis.c (fetch_data): Add prototype.
2263 * m68k-dis.c (fetch_data): Add prototype.
2264 (dummy_print_address): Add prototype. Make static.
2265 * ppc-opc.c (valid_bo): Add prototype.
2266 * sparc-dis.c (build_hash_table): Add prototype.
2267 (is_delayed_branch, compute_arch_mask): Add prototypes.
2268 (print_insn_sparc): Make several local variables const.
2269 (compare_opcodes): Change arguments to const PTR. Add prototype.
2270 * sparc-opc.c (arg): Change name field to be const.
2271 (lookup_name, lookup_value): Add prototypes. Change table and
2272 name parameters to be const.
2273 (sparc_encode_asi): Change name parameter to be const.
2274 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2275 (sparc_encode_sparclet_cpreg): Likewise.
2276 (sparc_decode_asi): Change return type to be const.
2277 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2278 (sparc_decode_sparclet_cpreg): Likewise.
2280 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2282 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2283 Solaris doesn't like the combined options, and the -f is
2285 (stamp-tshlink, install): Likewise.
2287 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2289 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2292 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2294 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2296 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2298 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2301 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2303 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2305 start-sanitize-tic80
2306 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2308 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2310 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2312 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2315 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2317 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2318 floatformat_to_double to make portable.
2319 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2322 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2324 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2325 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2327 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2329 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2330 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2332 start-sanitize-tic80
2333 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2335 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2336 (OFF_SL_BR_SCALED): ... to this, and added the flag
2337 TIC80_OPERAND_BASEREL to the flags word.
2338 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2342 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2344 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2345 Change mips_opcodes from const array to a pointer,
2346 and change bfd_mips_num_opcodes from const int to int,
2347 so that we can increase the size of the mips opcodes table
2350 start-sanitize-tic80
2351 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2353 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2354 store BITNUM values in the table in one's complement form
2355 to match behavior when assembler is given a raw numeric
2356 value for a BITNUM operand.
2357 * tic80-dis.c (print_operand_bitnum): Ditto.
2360 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2362 * d30v-opc.c: Removed references to FLAG_X.
2364 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2366 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2368 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2370 * Makefile.in: Added d30v object files.
2371 * configure: (bfd_d30v_arch) Rebuilt.
2372 * configure.in: (bfd_d30v_arch) Added new case.
2373 * d30v-dis.c: New file.
2374 * d30v-opc.c: New file.
2375 * disassemble.c (disassembler) Add entry for d30v.
2377 start-sanitize-tic80
2378 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2380 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2381 representations for the floating point BITNUM values.
2383 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2385 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2386 in the table in one's complement form, as they appear in the
2388 (tic80_symbol_to_value): Use macros to access predefined
2390 (tic80_value_to_symbol): Ditto.
2391 (tic80_next_predefined_symbol): New function.
2392 * tic80-dis.c (print_operand_bitnum): Remove code that did
2393 one's complement for BITNUM values.
2396 start-sanitize-r5900
2397 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2399 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2402 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2404 * makefile.vms: Remove 8 bit characters. Update to latest
2407 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2409 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2411 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2413 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2414 (IMM24_PCREL): Likewise.
2416 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2418 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2419 address for an extended PC relative instruction that is not a
2422 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2424 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2427 start-sanitize-tic80
2428 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2430 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2431 (tic80_opcodes): Sort entries so that long immediate forms
2432 come after short immediate forms, making it easier for
2433 assembler to select the right one for a given operand.
2436 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2438 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2440 (print_insn_mips16): Likewise.
2442 start-sanitize-r5900
2443 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2445 * mips-opc.c: add r5900.
2448 start-sanitize-tic80
2449 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2452 a symbol class that restricts translation to just that
2453 class (general register, condition code, etc).
2455 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2457 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2458 and REG_DEST_E for register operands that have to be
2459 an even numbered register. Add REG_FPA for operands that
2460 are one of the floating point accumulator registers.
2461 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2462 (tic80_opcodes): Change entries that need even numbered
2463 register operands to use the new operand table entries.
2464 Add "or" entries that are identical to "or.tt" entries.
2467 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2469 * mips16-opc.c: Add new cases of exit instruction for
2471 * mips-dis.c (print_mips16_insn_arg): Display floating point
2472 registers in operands of exit instruction. Print `$' before
2473 register names in operands of entry and exit instructions.
2475 start-sanitize-tic80
2476 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2478 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2479 pairs for all predefined symbols recognized by the assembler.
2480 Also used by the disassembling routines.
2481 (tic80_symbol_to_value): New function.
2482 (tic80_value_to_symbol): New function.
2483 * tic80-dis.c (print_operand_control_register,
2484 print_operand_condition_code, print_operand_bitnum):
2485 Remove private tables and use tic80_value_to_symbol function.
2488 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2490 * d10v-dis.c (print_operand): Change address printing
2491 to correctly handle PC wrapping. Fixes PR11490.
2493 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2495 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2498 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2500 * mips-dis.c (print_insn_mips16): Set insn_info information.
2501 (print_mips16_insn_arg): Likewise.
2503 * mips-dis.c (print_insn_mips16): Better handling of an extend
2504 opcode followed by an instruction which can not be extended.
2506 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2508 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2509 coldfire moveb instruction to not allow an address register as
2510 destination. Although the documentation does not indicate that
2511 this is invalid, experiments uncovered unexpected behavior.
2512 Added a comment explaining the situation. Thanks to Andreas
2513 Schwab for pointing this out to me.
2515 start-sanitize-tic80
2516 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2518 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2519 entries are presorted so that entries with the same mnemonic are
2520 adjacent to each other in the table. Sort the entries for each
2521 instruction so that this is true.
2524 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2526 * m68k-dis.c: Include <libiberty.h>.
2527 (print_insn_m68k): Sort the opcode table on the most significant
2528 nibble of the opcode.
2530 start-sanitize-tic80
2531 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2533 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2534 "vsub", "vst", "xnor", and "xor" instructions.
2535 (V_a1): Renamed from V_a, msb of accumulator reg number.
2536 (V_a0): Add macro, lsb of accumulator reg number.
2538 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2540 * tic80-dis.c (print_insn_tic80): Broke excessively long
2541 function up into several smaller ones and arranged for
2542 the instruction printing function to be callable recursively
2543 to print vector instructions that have both a load and a
2544 math instruction packed into a single opcode.
2545 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2546 to explain why it comes after the other vector opcodes.
2549 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2551 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2552 move insns to handle immediate operands.
2554 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2556 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2557 fix operand mask in the "moveml" entries for the coldfire.
2559 start-sanitize-tic80
2560 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2562 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2563 New macros for building vector instruction opcodes.
2564 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2565 FMT_LI, which were unused. The field is now a flags field.
2566 Remove some opcodes that are possible, but illegal, such
2567 as long immediate instructions with doubles for immediate
2568 values. Add "vadd" and "vld" instructions.
2570 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2572 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2573 the order more logical. Move the shift alias instructions ("rotl",
2574 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2575 interspersed with the regular sr.x and sl.x instructions. Add
2576 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2577 "sub", "subu", "swcr", and "trap".
2579 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2581 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2582 (OFF_SL_PC): Renamed from OFF_SL.
2583 (OFF_SS_BR): New operand type for base relative operand.
2584 (OFF_SL_BR): New operand type for base relative operand.
2585 (REG_BASE): New operand type for base register operand.
2586 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2587 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2588 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2590 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2591 10 char field, padded with spaces on rhs, rather than a string
2592 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2593 than old TIC80_OPERAND_RELATIVE. Add support for new
2594 TIC80_OPERAND_BASEREL flag bit.
2596 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2598 * tic80-dis.c (print_insn_tic80): Print floating point operands
2600 * tic80-opc.c (SPFI): Add single precision floating point
2601 immediate operand type.
2602 (ROTATE): Add rotate operand type for shifts.
2603 (ENDMASK): Add for shifts.
2604 (n): Macro for the 'n' bit.
2605 (i): Macro for the 'i' bit.
2606 (PD): Macro for the 'PD' field.
2607 (P2): Macro for the 'P2' field.
2608 (P1): Macro for the 'P1' field.
2609 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2613 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2615 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2616 adding in current address for pc-relative operands.
2618 start-sanitize-tic80
2619 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2621 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2622 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2623 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2624 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2625 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2626 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2627 (REG_SCALED, LSI_SCALED): New operand types.
2628 (E): New macro for 'E' bit at bit 27.
2629 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2630 opcodes, including the various size flavors (b,h,w,d) for
2631 the direct load and store instructions.
2633 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2635 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2637 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2638 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2639 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2640 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2641 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2642 masks with "MASK_* & ~M_*" to get the M bit reset.
2643 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2645 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2647 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2648 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2649 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2651 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2652 CC, SICR, and LICR table entries.
2653 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2654 "bcnd", and "brcr" opcodes.
2657 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2659 * ppc-opc.c (powerpc_operands): Make comment match the
2660 actual fields (no shift field).
2661 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2662 start-sanitize-tic80
2663 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2664 partial implementation, work in progress.
2665 * tic80-opc.c (tic80_operands): Begin construction operands table.
2666 (tic80_opcodes): Continue populating opcodes table and start
2667 filling in the operand indices.
2668 (tic80_num_opcodes): Add this.
2671 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2673 * m68k-opc.c: Add #B case for moveq.
2675 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2677 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2678 before they are used.
2680 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2682 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2683 for "breakpoint" instruction.
2685 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2687 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2688 (dep): Use ALL_CFLAGS rather than CFLAGS.
2690 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2692 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2695 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2697 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2698 start-sanitize-tic80
2699 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2702 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2704 * mips16-opc.c: Add "abs".
2706 start-sanitize-tic80
2707 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2709 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2710 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2711 (disassembler): Add bfd_arch_tic80 support to set disassemble
2712 to print_insn_tic80.
2713 * tic80-dis.c (print_insn_tic80): Add stub.
2715 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2717 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2718 * configure: Regenerate with autoconf.
2719 * tic80-dis.c: Add file.
2720 * tic80-opc.c: Add file.
2723 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2725 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2727 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2729 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2730 (mn10200_opcodes): Use it for some logicals and btst insns.
2731 Add "break" and "trap" instructions.
2733 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2735 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2737 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2739 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2740 relative load or add now depends upon whether the instruction is
2743 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2745 * mn10200-dis.c: Finish writing disassembler.
2746 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2747 Fix mask for "jmp (an)".
2749 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2750 handle endianness issues for mn10300.
2752 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2754 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2756 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2757 instruction. Fix opcode field for "movb (imm24),dn".
2759 * mn10200-opc.c (mn10200_operands): Fix insertion position
2762 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2764 * mn10200-opc.c: Create mn10200 opcode table.
2765 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2766 but moving along nicely.
2768 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2770 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2772 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2774 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2775 specifiers for fmovem* instructions.
2777 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2779 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2781 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2783 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2786 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2788 * mn10300-opc.c: Add some comments explaining the various
2791 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2793 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2795 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2798 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2799 operand specifiers in fmovm* instructions.
2801 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2803 * ppc-opc.c (insert_li): Give an error if the offset has the two
2804 least significant bits set.
2806 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2808 * mips-dis.c (print_insn_mips16): Separate the instruction from
2809 the arguments with a tab, not a space.
2811 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2813 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2816 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2819 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2821 * configure: Rebuild with autoconf 2.12.
2823 Add support for mips16 (16 bit MIPS implementation):
2824 * mips16-opc.c: New file.
2825 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2826 (mips16_reg_names): New static array.
2827 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2828 after seeing a 16 bit symbol.
2829 (print_insn_little_mips): Likewise.
2830 (print_insn_mips16): New static function.
2831 (print_mips16_insn_arg): New static function.
2832 * mips-opc.c: Add jalx instruction.
2833 * Makefile.in (mips16-opc.o): New target.
2834 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2835 * configure: Rebuild.
2837 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2839 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2840 operand specifiers in *save, *restore and movem* instructions.
2842 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2845 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2846 register operands for immediate arithmetic, not, neg, negx, and
2847 set according to condition instructions.
2849 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2850 specifier of the effective-address operand in immediate forms of
2851 arithmetic instructions. The specifier for the immediate operand
2852 notes how and where the constant will be stored.
2854 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2856 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2859 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2862 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2864 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2866 * mn10300-dis.c (disassemble): Handle register lists.
2868 * mn10300-opc.c: Fix handling of register list operand for
2869 "call", "ret", and "rets" instructions.
2871 * mn10300-dis.c (disassemble): Print PC-relative and memory
2872 addresses symbolically if possible.
2873 * mn10300-opc.c: Distinguish between absolute memory addresses,
2874 pc-relative offsets & random immediates.
2876 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2878 (disassemble): Handle SPLIT and EXTENDED operands.
2880 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2882 * mn10300-dis.c: Rough cut at printing some operands.
2884 * mn10300-dis.c: Start working on disassembler support.
2885 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2887 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2889 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2891 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2893 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2895 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2897 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2898 register argument is calls and jmp instructions.
2900 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2902 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2903 getx operand. Fix opcode for mulqu imm,dn.
2905 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2907 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2908 in MN10300_OPERAND_SPLIT operands for how many bits
2909 appear in the basic insn word. Add IMM32_HIGH24,
2910 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2911 (mn10300_opcodes): Use new operands as needed.
2913 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2914 for bset, bclr, btst instructions.
2915 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2917 * mn10300-opc.c (mn10300_operands): Remove many redundant
2918 operands. Update opcode table as appropriate.
2919 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2920 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2922 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2924 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2925 operands (for indexed load/stores). Fix bitpos for DI
2926 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2927 few instructions that insert immediates/displacements in the
2928 middle of the instruction. Add IMM8E for 8 bit immediate in
2929 the extended part of an instruction.
2930 (mn10300_operands): Use new opcodes as appropriate.
2932 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2934 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2935 sequential so the assembler never parallelizes it with
2938 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2940 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2941 a data/address register that appears in register field 0
2942 and register field 1.
2943 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2945 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2947 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2948 standard disassembly.
2950 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2951 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2952 Recategorize PALcode instructions.
2954 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2956 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2958 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2960 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2961 there are no operand types.
2963 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2965 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2967 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2969 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2971 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2973 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2975 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2976 and sst.w instructions.
2978 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2981 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2983 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2986 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2988 * ppc-opc.c (PPCPWR2): Define.
2989 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2992 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2995 field for movhu instruction.
2997 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2998 cast value to "long" not "signed long" to keep hpux10
3001 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3003 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3006 * mn10300-opc.c (FMT*): Remove definitions.
3008 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3009 for shift-by-register opcodes.
3011 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3012 into [AD][MN][01] for encoding the position of the register
3015 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3017 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3018 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3020 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3022 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3023 Fix various typos. Add "PAREN" operand.
3024 (MEM, MEM2): Define.
3025 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3026 operands. Fix several typos.
3028 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3031 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3034 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3036 (mn10300_opcodes): Break opcode format out into its own field.
3037 Update many operand fields to deal with signed vs unsigned
3038 issues. Fix one or two typos in the "mov" instruction
3039 opcode, mask and/or operand fields.
3041 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3043 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3044 m68851 wasn't reset.
3046 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3048 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3049 all opcodes. Very rough cut at operands for all opcodes.
3051 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3054 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3056 * mn10200-opc.c, mn10300-opc.c: New files.
3057 * mn10200-dis.c, mn10300-dis.c: New files.
3058 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3059 * disassemble.c: Break mn10x00 support into 10200 and 10300
3061 * configure.in: Likewise.
3062 * configure: Rebuilt.
3064 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3066 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3068 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3070 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3072 * disassemble (ARCH_mn10x00): Define.
3073 (disassembler): Handle bfd_arch_mn10x00.
3074 * configure.in: Recognize bfd_mn10x00_arch.
3075 * configure: Rebuilt.
3077 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3079 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3080 accordingly. Don't declare functions using op_rtn.
3082 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3084 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3085 params to be more standard.
3086 * (disassemble): Print absolute addresses and symbolic names for
3087 branch and jump targets.
3088 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3090 * (v850_opcodes): Add breakpoint insn.
3092 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3094 * m68k-opc.c: Move the fmovemx data register cases before the
3095 other cases, so that they get recognized before the data register
3096 does gets treated as a degenerate register list.
3098 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3100 * mips-opc.c: Add a case for "div" and "divu" with two registers
3101 and a destination of $0.
3103 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3105 * mips-dis.c (print_insn_arg): Add prototype.
3106 (_print_insn_mips): Ditto.
3108 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3110 * mips-dis.c (print_insn_arg): Print condition code registers as
3113 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3115 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3117 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3119 * v850-dis.c (disassemble): Make static. Provide prototype.
3121 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3123 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3126 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3128 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3129 ']' characters into the output stream.
3130 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3131 Add "memop" field to all opcodes (for the disassembler).
3132 Reorder opcodes so that "nop" comes before "mov" and "jr"
3133 comes before "jarl".
3135 * v850-dis.c (print_insn_v850): Fix typo in last change.
3137 * v850-dis.c (print_insn_v850): Properly handle disassembling
3138 a two byte insn at the end of a memory region when the memory
3139 region's size is only two byte aligned.
3141 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3143 * v850-dis.c (v850_reg_names): Define.
3144 (v850_sreg_names, v850_cc_names): Likewise.
3145 (disassemble): Very rough cut at printing operands (unformatted).
3147 * v850-opc.c (BOP_MASK): Fix.
3148 (v850_opcodes): Fix mask for jarl and jr.
3150 * v850-dis.c: New file. Skeleton for disassembler support.
3151 * Makefile.in Remove v850 references, they're not needed here.
3152 * configure.in: Add v850-dis.o when building v850 toolchains.
3153 * configure: Rebuilt.
3154 * disassemble.c (disassembler): Call v850 disassembler.
3156 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3157 (insert_d8_6, extract_d8_6): New functions.
3158 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3159 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3161 (IF4A, IF4B): Use "D7" instead of "D7S".
3162 (IF4C, IF4D): Use "D8_7" instead of "D8".
3163 (IF4E, IF4F): New. Use "D8_6".
3164 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3165 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3167 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3168 (v850_operands): Change D16 to D16_15, use special insert/extract
3169 routines. New new D16 that uses the generic insert/extract code.
3170 (IF7A, IF7B): Use D16_15.
3171 (IF7C, IF7D): New. Use D16.
3172 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3174 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3175 message. Issue an error if the branch offset is odd.
3177 * v850-opc.c: Add notes about needing special insert/extract
3178 for all the load/store insns, except "ld.b" and "st.b".
3180 * v850-opc.c (insert_d22, extract_d22): New functions.
3181 (v850_operands): Use insert_d22 and extract_d22 for
3183 (insert_d9): Fix range check.
3185 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3187 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3188 and set bits field to D9 and D22 operands.
3190 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3192 * v850-opc.c (v850_operands): Define SR2 operand.
3193 (v850_opcodes): "ldsr" uses R1,SR2.
3195 * v850-opc.c (v850_opcodes): Fix opcode specs for
3196 sld.w, sst.b, sst.h, sst.w, and nop.
3198 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3200 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3201 end of the opcode table.
3203 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3205 * d10v-opc.c (pre_defined_registers): Added register pairs,
3206 "r0-r1", "r2-r3", etc.
3208 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3210 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3211 Create I16U for an unsigned 16bit mmediate operand.
3212 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3214 * v850-opc.c (v850_operands): Define EP operand.
3215 (IF4A, IF4B, IF4C, IF4D): Use EP.
3217 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3218 with immediate operand, "movhi". Tweak "ldsr".
3220 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3221 correct. Get sld.[bhw] and sst.[bhw] closer.
3223 * v850-opc.c (v850_operands): "not" is a two byte insn
3225 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3227 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3229 * v850-opc.c (two): Get order of words correct.
3231 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3233 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3234 register source and destination operands.
3235 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3237 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3238 same thinko in "trap" opcode.
3240 * v850-opc.c (v850_opcodes): Add initializer for size field
3243 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3244 Add D8 for 8-bit unsigned field in short load/store insns.
3245 (IF4A, IF4D): These both need two registers.
3246 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3247 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3248 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3249 for "ldsr" and "stsr".
3250 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3253 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3254 short store word (sst.w).
3256 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3258 * v850-opc.c (v850_operands): Added insert and extract fields,
3259 pointers to functions that handle unusual operand encodings.
3261 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3263 * v850-opc.c (v850_opcodes): Enable "trap".
3265 * v850-opc.c (v850_opcodes): Fix order of displacement
3266 and register for "set1", "clr1", "not1", and "tst1".
3268 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3270 * v850-opc.c (v850_operands): Add "B3" support.
3271 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3274 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3276 * v850-opc.c: Close unterminated comment.
3278 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3280 * v850-opc.c (v850_operands): Add flags field.
3281 (v850_opcodes): add move opcodes.
3283 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3285 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3286 * configure: (bfd_v850v_arch) Add new case.
3287 * configure.in: (bfd_v850_arch) Add new case.
3288 * v850-opc.c: New file.
3290 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3292 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3294 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3296 * d10v-opc.c: Add additional information to the opcode
3297 table to help determinine which instructions can be done
3300 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3302 * mpw-make.sed: Update editing of include pathnames to be
3305 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3307 * arm-opc.h: Added "bx" instruction definition.
3309 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3311 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3313 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3315 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3317 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3319 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3321 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3323 * makefile.vms: Update for alpha-opc changes.
3325 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3327 * i386-dis.c (print_insn_i386): Actually return the correct value.
3328 (ONE, OP_ONE): #ifdef out; not used.
3330 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3332 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3333 Changed subi operand type to treat 0 as 16.
3335 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3337 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3340 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3342 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3343 memory transfer instructions. Add new format string entries %h and %s.
3344 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3347 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3349 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3350 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3352 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * alpha-dis.c (print_insn_alpha_osf): Remove.
3355 (print_insn_alpha_vms): Remove.
3356 (print_insn_alpha): Make globally visible. Chose the register
3357 names based on info->flavour.
3358 * disassemble.c: Always return print_insn_alpha for the alpha.
3360 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3362 * d10v-dis.c (dis_long): Handle unknown opcodes.
3364 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3366 * d10v-opc.c: Changes to support signed and unsigned numbers.
3367 All instructions with the same name that have long and short forms
3368 now end in ".l" or ".s". Divs added.
3369 * d10v-dis.c: Changes to support signed and unsigned numbers.
3371 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3373 * d10v-dis.c: Change all functions to use info->print_address_func.
3375 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3377 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3378 move ccr/sr insns more strict so that the disassembler only
3379 selects them when the addressing mode is data register.
3381 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3382 * d10v-opc.c (pre_defined_registers): Declare.
3383 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3384 to pick a better name for the registers.
3386 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3388 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3389 operands for fexpand and fpmerge. From Christian Kuehnke
3390 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3392 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3394 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3395 print routine. Take new regnames and cpumask arguments.
3396 Kill the environment variable nonsense.
3397 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3398 (print_insn_alpha_vms): New function. Do VMS style regnames.
3399 * disassemble.c (disassembler): Test bfd flavour to pick
3400 between OSF and VMS routines. Default to OSF.
3402 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3404 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3405 * configure: Rebuild.
3406 * Makefile.in (install): Use @INSTALL_SHLIB@.
3408 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3410 * configure: (bfd_d10v_arch) Add new case.
3411 * configure.in: (bfd_d10v_arch) Add new case.
3412 * d10v-dis.c: New file.
3413 * d10v-opc.c: New file.
3414 * disassemble.c (disassembler) Add entry for d10v.
3416 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3418 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3419 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3421 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3423 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3424 distinguish between variants of the instruction set.
3425 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3426 distinguish between variants of the instruction set.
3428 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3430 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3431 the 8086 instruction set.
3432 * i386-dis.c: General cleanups. Make most things static. Add
3433 prototypes. Get rid of static variables aflags and dflags. Pass
3434 them as args (to almost everything).
3436 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3438 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3440 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3442 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3443 if the next arg is marked with SRC_IN_DST. Gross.
3445 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3446 we're looking for and find EXR.
3448 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3449 if we're looking for KBIT and we don't find it.
3451 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3454 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3455 3bit immediate operands.
3457 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3459 * Released binutils 2.7.
3461 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3462 <kkaempf@progis.ac-net.de>.
3464 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3468 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3470 * sparc-dis.c (print_insn_sparclite): New routine to print
3471 sparclite instructions.
3473 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3475 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3477 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3479 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3480 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3481 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3483 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3485 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3486 Use autoconf-set values.
3487 (docdir, oldincludedir): Removed.
3488 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3490 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3492 * alpha-opc.c: New file.
3493 * alpha-opc.h: Remove.
3494 * alpha-dis.c: Complete rewrite to use new opcode table.
3495 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3496 * configure: Rebuild with autoconf 2.10.
3497 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3498 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3500 (alpha-opc.o): New target.
3502 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3504 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3505 Set imm_added_to_rs1 even if the source and destination register
3508 * sparc-opc.c: Add some two operand forms of the wr instruction.
3510 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3512 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3515 * disassemble.c (disassembler): Handle H8/S.
3516 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3518 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * sparc-opc.c: Add beq/teq as aliases for be/te.
3522 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3523 <sergei@msil.sps.mot.com>.
3525 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3527 * makefile.vms: New file.
3529 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3531 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3536 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3538 * i386-dis.c (OP_OFF): Call append_prefix.
3540 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3542 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3543 unsigned long to silence a warning from the Solaris PowerPC
3546 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3548 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3550 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3552 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3554 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3555 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3556 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3557 cpush, cpusha, cpull sparclet insns.
3559 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3561 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3563 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3565 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3566 Set F_FLOAT on other floating point instructions.
3568 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3570 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3572 (powerpc_opcodes): Add 860/821 specific SPRs.
3574 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * configure.in: Permit --enable-shared to specify a list of
3577 directories. Set and substitute BFD_PICLIST.
3578 * configure: Rebuild.
3579 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3580 uses. Set to @BFD_PICLIST@.
3582 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3584 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3585 not "abs", which may be needed for the absolute in something
3586 like btst #0,@10:8. Print L_3 immediates separately from other
3587 immediates. Change ABSMOV reference to ABS8MEM.
3589 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3591 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3592 (current_arch_mask): New static global.
3593 (compute_arch_mask): New static function.
3594 (print_insn_sparc): Delete sparc_v9_p. New static local
3595 current_mach. Resort opcode table if current_mach changes.
3596 Generalize "insn not supported" test.
3597 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3598 Delete test for v9/!v9.
3599 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3601 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3602 (brfcx): Renamed to FBRX.
3603 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3604 coprocessor mnemonics are not supported on the sparclet).
3605 (condf): Renamed to CONDF.
3606 (SLCBCC2): Delete F_ALIAS flag.
3608 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3610 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3611 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3613 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3615 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3616 that the shared library version number is set correctly.
3618 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3620 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3621 Miles Bader <miles@gnu.ai.mit.edu>.
3622 * configure: Rebuild.
3624 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3626 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3629 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3631 * configure: Rebuild with autoconf 2.8.
3633 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3635 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3636 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3638 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3640 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3641 since they appear as targets in Makefile.in.
3642 * configure: Rebuild.
3644 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3646 * mpw-make.sed: Edit out shared library support bits.
3648 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3650 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3651 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3652 (sparc_opcodes): Add sparclet insns.
3653 (sparclet_cpreg_table): New static local.
3654 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3655 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3657 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3659 * i386-dis.c (index16): New static variable.
3660 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3662 (OP_indirE): Return result of OP_E.
3663 (OP_E): Check for 16 bit addressing mode, and disassemble
3664 correctly. Optimised 32 bit case a little. Don't print
3665 "(base,index,scale)" when sib specifies only an offset.
3667 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3669 * configure.in: Set and substitute SHLIB_DEP.
3670 * configure: Rebuild.
3671 * Makefile.in (SHLIB_DEP): New variable.
3672 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3673 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3674 COMMON_SHLIB, add them to piclist with appropriate modifications.
3675 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3676 here: just use piclist.
3678 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3680 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3681 (print_insn_sparc): Rewrite v9/not-v9 tests.
3682 (compare_opcodes): Likewise.
3683 * sparc-opc.c (MASK_<ARCH>): Define.
3684 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3685 (sparclet,v6notv9): Define.
3686 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3687 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3689 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3691 * configure.in: Call AC_PROG_CC before configure.host.
3692 * configure: Rebuild.
3694 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3696 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3698 * i386-dis.c (onebyte_has_modrm): New static array.
3699 (twobyte_has_modrm): New static array.
3700 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3702 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3704 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3707 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3709 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3712 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3714 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3715 m68010up, not just m68020up | cpu32.
3717 * Makefile.in (SONAME): New variable.
3718 ($(SHLINK)): Make a link to the transformed name, as well.
3719 (stamp-tshlink): New target.
3720 (install): Skip stamp-tshlink during install.
3722 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3724 * configure.in: Call AC_ARG_PROGRAM.
3725 * configure: Rebuild.
3726 * Makefile.in (program_transform_name): New variable.
3727 (install): Transform library name before installing it.
3729 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3731 * i960-dis.c (mem): Add HX dcinva instruction.
3733 Support for building as a shared library, based on patches from
3734 Alan Modra <alan@spri.levels.unisa.edu.au>:
3735 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3736 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3737 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3738 * configure: Rebuild.
3739 * Makefile.in (ALLLIBS): New variable.
3740 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3741 (COMMON_SHLIB, SHLINK): New variables.
3742 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3743 (STAGESTUFF): Remove variable.
3744 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3745 (stamp-piclist, piclist): New targets.
3746 ($(SHLIB), $(SHLINK)): New targets.
3747 ($(OFILES)): Depend upon stamp-picdir.
3748 (disassemble.o): Build twice if PICFLAG is set.
3749 (MOSTLYCLEAN): Add pic/*.o.
3750 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3751 (distclean): Remove pic and stamp-picdir.
3752 (install): Install shared libraries.
3753 (stamp-picdir): New target.
3755 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3757 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3758 Print unknown instruction as "unknown", rather than in hex.
3760 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3762 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3764 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3766 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3768 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3770 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3771 when necessary. From Ulrich Drepper
3772 <drepper@myware.rz.uni-karlsruhe.de>.
3774 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3776 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3777 sparc_num_opcodes. Update architecture enum values.
3778 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3779 (sparc_opcode_lookup_arch): New function.
3780 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3781 (sparc_opcodes): Add v9a shutdown insn.
3783 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3785 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3786 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3788 (print_insn_sparc64): Deleted.
3789 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3792 * sparc-opc.c (architecture_pname): Add v9a.
3794 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3796 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3797 incorrectly defined as 0x16 when it should be 0x15.
3798 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3799 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3800 excb (exception barrier) which is defined in the Alpha
3801 Architecture Handbook version 2.
3802 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3803 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3804 disassembled as or, for example.
3806 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3808 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3809 (_print_insn_mips): Change i from int to unsigned int.
3811 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3813 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3814 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3816 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3818 * i386-dis.c: Added Pentium Pro instructions.
3820 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3822 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3825 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3827 * sh-opc.h (sh_nibble_type): Added REG_B.
3828 (sh_arg_type): Added A_REG_B.
3829 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3831 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3833 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3835 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3837 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3839 * Makefile.in (distclean): Remove stamp-h. From Ronald
3840 F. Guilmette <rfg@monkeys.com>.
3842 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3844 From David Mosberger-Tang <davidm@azstarnet.com>:
3845 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3848 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3850 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3851 (sh_table): Added many SH3 opcodes.
3852 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3854 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3856 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3857 (subco,subco.): Mark this PPC, not PPCCOM.
3859 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3861 * configure: Rebuild with autoconf 2.7.
3863 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3865 * configure: Rebuild with autoconf 2.6.
3867 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3869 * configure.in: Sort list of architectures. Accept but do nothing
3870 for alliant, convex, pyramid, romp, and tahoe.
3872 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3874 * a29k-dis.c (print_special): Change num to unsigned int.
3876 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3878 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3881 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3883 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3884 * configure: Rebuilt.
3886 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3888 * configure.in: Add case for bfd_i860_arch.
3889 * configure: Rebuild.
3891 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3893 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3894 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3895 (NEXTDOUBLE): Likewise.
3896 (print_insn_m68k): Don't match fmoveml if there is more than one
3897 register in the list.
3898 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3900 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3902 * m68k-opc.c: Use #W rather than #w.
3903 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3905 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3907 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3908 and likewise for all the dbxx opcodes.
3910 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3912 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3914 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3916 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3917 the VR4100 specific instructions to the mips_opcodes structure.
3919 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3921 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3922 ugly Metrowerks bug in CW6, is fixed in CW7.
3924 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3926 * ppc-opc.c (whole file): Add flags for common/any support.
3928 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3930 * Makefile.in (BISON): Remove macro.
3931 (FLAGS_TO_PASS): Remove BISON.
3933 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3935 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3937 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3938 instructions that take no args by looking at the match mask.
3939 (print_insn_arg): Always print "%" before register names.
3940 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3941 [case '_']: Don't print "@#" before address.
3942 [case 'J']: Use "%s" as format string, not register name.
3943 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3945 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3947 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3950 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3952 From David Mosberger-Tang <davidm@azstarnet.com>
3954 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3955 (alpha_insn_set): added definitions for VAX floating point
3956 instructions (Unix compilers don't generate these, but handcoded
3957 assembly might still use them).
3959 * alpha-dis.c (print_insn_alpha): added support for disassembling
3960 the miscellaneous instructions in the Alpha instruction set.
3962 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3964 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3965 no longer create sysdep.h, sed ppc-opc.c to work around a
3966 serious Metrowerks C bug.
3967 * mpw-make.in: Remove.
3968 * mpw-make.sed: New file, used by mpw-configure to edit
3969 Makefile.in into an MPW makefile.
3971 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * Makefile.in (maintainer-clean): New synonym for realclean.
3975 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3977 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3978 which use '0', '1', and '2' instead. Specify the proper size for
3979 a pmove immediate operand. Correct the pmovefd patterns to be
3980 moves to a register, not from a register.
3981 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3983 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3985 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3986 %psr, %wim, %tbr as F_NOTV9.
3988 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3990 * Makefile.in (Makefile): Just rebuild Makefile when running
3992 (config.h, stamp-h): New targets.
3993 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3994 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3995 rebuilding config.h.
3996 * configure: Rebuild.
3998 * mips-opc.c: Change unaligned loads and stores with "t,A"
3999 operands to use "t,A(b)".
4001 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4003 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4005 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4007 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4008 until 3 instead of until 2.
4010 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4012 * Makefile.in (ALL_CFLAGS): Define.
4013 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4014 (MOSTLYCLEAN): Add config.log.
4015 (distclean): Don't remove config.log.
4016 * configure.in: Substitute HDEFINES.
4017 * configure: Rebuild.
4019 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4021 * sh-opc.h (sh_arg_type): Add F_FR0.
4022 (sh_table, case fmac): Add F_FR0 as first argument.
4024 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4026 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4028 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4030 * sparc-dis.c: Remove all references to NO_V9.
4032 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4034 * aclocal.m4: Just include ../bfd/aclocal.m4.
4035 * configure: Rebuild.
4037 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4039 * sparc-dis.c (X_DISP19): Define.
4040 (print_insn, case 'G'): Use it.
4041 (print_insn, case 'L'): Sign extend displacement.
4043 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4045 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4046 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4047 host_makefile_frag or frags.
4048 * aclocal.m4: New file.
4049 * configure: Rebuild.
4050 * Makefile.in (INSTALL): Set to @INSTALL@.
4051 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4052 (INSTALL_DATA): Set to @INSTALL_DATA@.
4054 (AR_FLAGS): Set to rc rather than qc.
4055 (CC): Define as @CC@.
4056 (CFLAGS): Set to @CFLAGS@.
4057 (@host_makefile_frag@): Remove.
4058 (config.status): Remove dependency upon @frags@.
4060 * configure.in: ../bfd/config.bfd now just sets shell variables.
4061 Use them rather than looking through target Makefile fragments.
4062 * configure: Rebuild.
4064 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4066 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4068 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4070 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4071 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4074 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4075 (lookup_{name,value}): New functions.
4076 (prefetch_table): New static local.
4077 (sparc_{encode,decode}_prefetch): New functions.
4078 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4080 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4082 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4085 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4087 * sh-dis.c: Correct comment on first line of file.
4089 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4091 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4093 * sparc-opc.c (asi, membar): New static locals.
4094 (sparc_{encode,decode}_{asi,membar}): New functions.
4095 (sparc_opcodes, membar insn): Fix.
4096 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4097 Support decoding of membar masks.
4100 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4104 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4106 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4107 and likewise for the other branches. Add bhs as an alias for bcc,
4108 and likewise for the size variants. Add dbhs as an alias for
4111 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4113 * sh-opc.h (FP sts instructions): Update to match reality.
4115 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4117 * m68k-dis.c: (fpcr_names): Add % before all register names.
4118 (reg_names): Likewise.
4119 (print_insn_arg): Don't explicitly print % before register names.
4120 Add % before register names in static array names. In case 'r',
4121 print data registers as `@(Dn)', not `Dn@'. When printing a
4122 memory address, don't print @# before it.
4123 (print_indexed): Change base_disp and outer_disp from int to
4124 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4125 syntax. Sign extend 8 byte displacement correctly.
4126 (print_base): Print using MIT syntax. Print zpc when appropriate.
4127 Change parameter disp from int to bfd_vma.
4129 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4132 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4134 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4135 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4136 * sh-opc.h (sh_arg_type): Add new operand types.
4137 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4139 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4141 * Makefile.in (distclean): Remove generated file config.h.
4143 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4145 * Makefile.in (distclean): Remove generated file config.h.
4147 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4149 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4151 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4153 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4154 rather than numopcodes. Use m68k_opcodes rather than removed
4155 opcode function. Don't check F_ALIAS.
4156 (print_insn_arg): Change first parameter to be const char *.
4157 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4158 (m68k-opc.o): New target.
4159 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4160 * configure: Rebuild.
4162 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4164 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4165 (opcode_bits, opcode_hash_table): New variables.
4166 (opcodes_initialized): Renamed from opcodes_sorted.
4167 (build_hash_table): New function.
4168 (is_delayed_branch): Use hash table.
4169 (print_insn): Renamed from print_insn_sparc, made static.
4170 Build and use hash table. If !sparc64, ignore sparc64 insns,
4171 and vice-versa if sparc64.
4172 (print_insn_sparc, print_insn_sparc64): New functions.
4173 (compare_opcodes): Move sparc64 opcodes to end.
4174 Print commutative insns with constant second.
4175 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4177 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4179 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4180 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4181 avoids printing a delay slot in a delay slot.
4182 * sh-opc.h (sh_table): Fully bracket last entry.
4184 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4186 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4188 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4190 * configure.in: Get host_makefile_frag from ${srcdir}.
4192 * configure.in: Autoconfiscated. Check for string[s].h. Create
4193 config.h from config.in. Don't set up sysdep.h link.
4194 * sysdep.h: New file.
4195 * configure, config.in: New files, generated from configure.in.
4196 * Makefile.in: Updated to be processed autoconf-style.
4197 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4198 (Makefile): Depend on config.status.
4199 (config.status): New rule.
4200 * configure.bat: Update Makefile substitutions.
4202 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4204 * mips-opc.c (L1): Define.
4205 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4206 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4209 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4211 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4212 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4213 have multiple add units but only a single logical unit.
4215 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4216 shifted by 18, without any insertion or extraction function.
4217 (insert_cr, extract_cr): Remove.
4219 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4221 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4224 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4226 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4227 * sh-opc.h: Add copyright.
4229 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4231 * Makefile.in (crunch-m68k): Delete extra target accidentally
4232 checked in a while ago.
4234 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4236 * sh-opc.h (sh_table): Add SH3 support.
4238 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4240 * sh-opc.h: Added bsrf and braf.
4242 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4244 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4245 bogus [ls]fm{ea,fd} patterns.
4247 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4248 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4249 initialize it from memory. Make function static.
4250 (print_insn_{big,little}_arm): New functions.
4251 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4252 the correct endianness.
4254 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4256 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4259 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4261 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4262 17th, so that it builds again using GCC as the compiler.
4264 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4266 * mips-dis.c (print_insn_little_mips): Cast return value from
4267 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4268 expects an unsigned long, and that might be fewer words of
4269 argument storage (e.g., if bfd_vma is long long on a 32-bit
4271 (print_insn_big_mips): Likewise with bfd_getb32 value.
4272 (_print_insn_mips): Now static.
4274 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4276 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4277 gcc memory hog problem with initializer is fixed.
4279 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4281 Merge in support for Mac MPW as a host.
4282 (Old change descriptions retained for informational value.)
4284 * mpw-config.in (archname): Compute from the config.
4285 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4287 * mpw-config.in (target_arch): Compute from canonical target.
4288 (m68k, mips, powerpc, sparc): Add architectures.
4289 * mpw-make.in (disassemble.c.o): Add.
4290 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4292 * mpw-config.in (BFD_MACHINES): Set to a default value.
4293 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4295 * mpw-make.in (CSEARCH): Add extra-include to search path.
4297 * mpw-config.in (varargs.h): Don't create.
4298 (sysdep.h): Create using forward-include.
4299 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4301 * mpw-config.in: New file, MPW version of configure.in.
4302 * mpw-make.in: New file, MPW version of Makefile.in.
4304 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4306 * alpha-dis.c (print_insn_alpha): Put empty statement after
4309 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4311 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4312 (low_sign_extend): Likewise.
4313 (get_field): Delete unused function.
4314 (set_field, deposit_14, deposit_21): Likewise.
4316 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4318 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4321 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4323 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4325 * alpha-opc.h (OSF_ASMCODE): define
4326 print pal-code names as defined in App C of the
4327 Alpha Architecture Reference Manual
4329 * alpha-dis.c: cleaned up output
4330 print stylized code forms as defined in App A.4.3 of the
4331 Alpha Architecture Reference Manual
4333 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4335 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4337 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4340 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4342 * m68k-dis.c (opcode): New function. Returns address of opcode
4343 table entry given index, even if the opcode table was split to
4344 work around gcc bugs.
4345 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4347 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4348 (reg_names): Now const.
4349 (print_insn_arg): Arrays cacheFieldName and names now const.
4350 (print_indexed): Array scales now const.
4352 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4354 * ppc-opc.c: Sort recently added instructions by minor opcode
4355 number within major opcode number.
4357 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4359 * hppa-dis.c: Include libhppa.h.
4361 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4363 * mips-opc.c: Change dli to use M_DLI, and add dla.
4365 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4367 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4369 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4371 * mips-opc.c: Add r4650 mul instruction.
4373 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4375 * mips-opc.c: Add uld and usd macros for unaligned double load and
4378 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4380 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4381 mfdcr, mtdcr, icbt, iccci.
4383 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4385 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4386 signed char fields to shorts, more portable.
4388 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4390 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4391 char fields as signed chars, since they may have negative values.
4393 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4395 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4396 (mycroft@netbsd.org).
4398 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4400 From "Logg, Ed" <elogg@ea.com>:
4401 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4402 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4405 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4407 * ppc-opc.c: Changes based on patch from David Edelsohn
4408 <edelsohn@mhpcc.edu>.
4409 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4412 (insert_tbr): New static function.
4413 (extract_tbr): New static function.
4414 (XFXFXM_MASK, XFXM): Define.
4415 (XSPRBAT_MASK, XSPRG_MASK): Define.
4416 (powerpc_opcodes): Add instructions to access special registers by
4417 name. Add mtcr and mftbu.
4419 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4421 * mips-opc.c (P3): Define.
4422 (mips_opcodes): Add mad and madu.
4424 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4426 * configure.in: Add W65 support.
4427 * disassemble.c: Likewise.
4428 * w65-opc.h, w65-dis.c: New files.
4430 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4432 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4435 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4437 * mips-opc.c: Add dli as a synonym for li.
4439 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4441 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4442 print something for reserved opcode values, even if it won't
4445 * mips-dis.c (_print_insn_mips): When initializing, shift right
4446 and mask, to avoid sign extension problems on the Alpha.
4448 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4451 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4453 * sh-opc.h (mov.l gbr): Get direction right.
4454 * sh-dis.c (print_insn_shx): New function.
4455 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4456 print opcodes with right byte order.
4458 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4460 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4461 to avoid conflicts with getopt.
4463 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4465 * hppa-dis.c (print_insn_hppa): Read the instruction using
4466 bfd_getb32, so that it works on a little endian or 64 bit host.
4467 Remove unused local variable op.
4469 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4471 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4472 addu does not work correctly if -mips3.
4474 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4476 * a29k-dis.c (print_special): Add special register names defined
4477 on 29030, 29040 and 29050.
4478 (print_insn): Handle new operand type 'I'.
4480 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4482 * Makefile.in (INSTALL): Use top level install.sh script.
4484 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4486 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4487 that it works on a little endian host.
4489 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4491 * configure.in: Use ${config_shell} when running config.bfd.
4493 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4495 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4497 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4499 * a29k-dis.c (print_insn): Print the opcode.
4501 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4503 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4505 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4507 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4509 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4511 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4512 which store a value into memory.
4514 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4516 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4517 * arm-dis.c, arm-opc.h: New files.
4519 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4521 * Makefile.in (ns32k-dis.o): Add dependency.
4522 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4523 string, not as array of chars.
4525 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4527 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4529 * sparc-opc.c: Added sparclite extended FP operations, and
4530 versions of v9 impdep* instructions permitting specification of
4533 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4535 * i960-dis.c (reg_names): Now const.
4536 (struct sparse_tabent): New type, copied from array type in mem
4538 (ctrl): Local static array ctrl_tab now const.
4539 (cobr): Local static array cobr_tab now const.
4540 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4541 static variable mem_tab no longer explicitly initialized. Changed
4542 mem_init to const array of struct sparse_tabent.
4543 (reg): Local static variable reg_tab no longer explicitly
4544 initialized. Changed reg_init to const array of struct
4546 (ea): Local static array scale_tab now const.
4548 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4551 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4553 * configure.bat: the disassember needs to be enabled for
4554 "objdump -d" to work in djgpp.
4556 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4558 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4559 (invalid_float): Enabled general version, doesn't require running
4560 on ns32k host. Changed to take char* argument, and test for
4561 explicitly specified sizes, instead of using sizeof() on host CPU
4563 (INVALID_FLOAT): Cast first argument.
4564 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4565 list_P032, list_M032): Now const.
4566 (optlist, list_search): Made appropriate arguments now point to
4568 (print_insn_arg): Changed static array of one-character-string
4569 pointers into a static const array of characters; fixed sprintf
4570 statement accordingly.
4572 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4574 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4575 from distribution. A ns32k-dis.c from a previous distribution has
4576 been brought up to date and supports the new interface.
4578 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4580 * configure.in: add bfd_ns32k_arch target support.
4582 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4583 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4585 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4587 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4590 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4592 * h8300-dis.c, mips-dis.c: Don't use true and false.
4594 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4596 * configure.in: Change --with-targets to --enable-targets.
4598 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4600 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4601 opcodes to the first instruction with that opcode, to speed
4602 disassembly of large files. From ralphc@pyramid.com (Ralph
4605 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4609 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4611 * configure.bat: update to latest makefile.in
4613 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4615 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4616 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4617 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4618 slot insn is in a delay slot.
4619 * z8k-opc.h: (resflg): Fix patterns.
4620 * h8500-opc.h Fix CR insn patterns.
4622 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4625 "cmpl" before POWER versions, so that gas -many uses them.
4627 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4629 * disassemble.c: New file.
4630 * Makefile.in (OFILES): Add disassemble.o.
4631 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4632 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4633 binutils/configure.in.
4635 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4636 opcode being examined.
4638 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4640 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4641 (insert_ral, insert_ram, insert_ras): New functions.
4642 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4643 RAS for store with update.
4645 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4647 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4648 (edelsohn@npac.syr.edu).
4650 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4655 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4657 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4659 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4661 * ppc-opc.c (powerpc_operands): The signedp field has been
4662 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4663 instead. Add new operand SISIGNOPT.
4664 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4665 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4666 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4669 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4671 * i386-dis.c (struct private): Renamed to dis_private. `private'
4672 is a reserved word for dynix cc.
4674 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * configure.in: Change error message to refer to bfd/config.bfd
4677 rather than bfd/configure.in.
4679 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4681 * ppc-opc.c: Define POWER2 as short alias flag.
4682 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4685 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4687 * i960-dis.c (print_insn_i960): Don't read a second word for
4688 opcodes 0, 1, 2 and 3.
4690 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4694 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4696 * m68881-ext.c: Removed; no longer used.
4697 * Makefile.in: Changed accordingly.
4699 * m68k-dis.c (ext_format_68881): Don't declare.
4700 (print_insn_m68k): If an instruction uses place 'i', it uses at
4701 least four fixed bytes.
4702 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4703 extended float, convert to double using floatformat_to_double, not
4704 ieee_extended_to_double, and fetch the data before converting it.
4706 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4708 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4709 davidj@ICSI.Berkeley.EDU (David Johnson).
4711 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4714 PowerPC uses bdnz[l][a].
4716 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4718 * dis-buf.c, i386-dis.c: Include sysdep.h.
4720 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4722 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4724 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4725 by Motorola PowerPC 601 with PPC_OPCODE_601.
4726 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4727 Disassemble Motorola PowerPC 601 instructions as well as normal
4728 PowerPC instructions.
4730 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4732 * i960-dis.c (reg, mem): Just use a static array instead of
4735 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4737 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4738 condition name index if this is for a negated condition.
4740 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4741 Floating point format for 'H' operand is backwards from normal
4742 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4743 operands (fmpyadd and fmpysub), handle bizarre register
4744 translation correctly for single precision format.
4746 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4747 or 'I' operands if the next format specifier is 'M' (fcmp
4748 condition completer).
4750 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4752 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4753 single number giving a bitmask for the MB and ME fields of an M
4754 form instruction. Change NB to accept 32, and turn it into 0;
4755 also turn 0 into 32 when disassembling. Seperated SH from NB.
4756 (insert_mbe, extract_mbe): New functions.
4757 (insert_nb, extract_nb): New functions.
4758 (SC_MASK): Mask out SA and LK bits.
4759 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4760 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4761 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4762 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4763 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4764 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4765 (powerpc_macros): Define table of macro definitions.
4766 (powerpc_num_macros): Define.
4768 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4769 if PPC_OPERAND_NEXT is set.
4771 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4774 char. Retrieve contents using bfd_getl32 instead of shifting.
4776 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * ppc-opc.c: New file. Opcode table for PowerPC, including
4779 opcodes for POWER (RS/6000).
4780 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4781 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4782 (CFILES): Add ppc-dis.c.
4783 (ppc-dis.o, ppc-opc.o): New targets.
4784 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4786 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4788 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4789 No space before 'u', 'f', or 'N'.
4791 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4793 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4794 farther than we should.
4796 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4798 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4800 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4802 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4804 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4805 needs it, to prevent reading past the end of a section.
4807 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4810 Removed t,A case for la; always use t,A(b) case.
4812 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 From Ted Lemen <mellon@pepper.ncd.com>
4815 * mips-dis.c (print_insn_arg): Handle 'k'.
4816 * mips-opc.c: Make cache use k, not t.
4818 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4820 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4821 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4822 FLOAT_FORMAT_CODE to put out floating point register names.
4824 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4828 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4832 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4835 larger than 32. Moved dsxx32 variants first for disassembler.
4837 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4839 * z8kgen.c, z8k-opc.h: Add full lda information.
4841 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4843 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4844 movb instructions. Any necessary space will be emitted by
4845 the code to handle nullification completers.
4847 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4849 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4851 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4853 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4854 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4856 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4858 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4860 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4862 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4863 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4865 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4867 * m88k-dis.c (m88kdis): comment change. Remove space after
4869 (printop): handle new arg types DEC and XREG for m88110.
4871 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4873 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4874 type for absolute branch addresses. Delete special
4875 "ble" and "be" code in 'W' operand code.
4877 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4879 * mips-opc.c: Set hazard information correctly for branch
4880 likely instructions.
4882 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4884 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4885 info->fprintf_func for printing and info->print_address_func for
4888 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4892 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4894 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4895 Corrected second case of "b" for disassembler.
4897 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4900 to BFD swapping routines to correspond to BFD name changes.
4902 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4904 * mips-opc.c: Change div machine instruction to be z,s,t rather
4905 than s,t. Change div macro to be d,v,t rather than d,s,t.
4906 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4907 rem and remu which generates only the corresponding div
4908 instruction. This is for compatibility with the MIPS assembler,
4909 which only generates the simple machine instruction when an
4910 explicit destination of $0 is used.
4911 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4913 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4915 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4916 WR_31 hazard for bal, bgezal, bltzal.
4918 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4920 * hppa-dis.c (print_insn_hppa): Use print function
4921 from within the disassemble_info, not fprintf_filtered.
4923 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4925 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4926 Law, law@cs.utah.edu.)
4928 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4930 * mips-opc.c ("absu"): Removed.
4933 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4935 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4936 Changed hazard information to distinguish between memory load
4937 delays and coprocessor load delays.
4939 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4941 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4943 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4945 * configure.in: Don't pass cpu to config.bfd.
4947 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4949 * m88k-dis.c (m88kdis): Make class unsigned.
4951 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4953 * alpha-dis.c (print_insn_alpha): One branch format case was
4954 missing the instruction name.
4956 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4958 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4959 Add the arch-specific auxiliary files.
4960 (OFILES): Remove the arch-specific auxiliary files
4961 and use BFD_MACHINES instead of DIS_LIBS.
4962 * configure.in: Set BFD_MACHINES based on --with-targets option.
4964 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4966 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4969 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4971 * sparc-opc.c: Change CONST to const to deal with gcc
4972 -Dconst=__const -traditional.
4974 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4976 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4977 coprocessor instructions out of #if 0, and made them use new
4980 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4982 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4984 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4986 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4987 instruction, for use by the disassembler.
4989 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4990 hand-coded sign extensions that depended on 32-bit host ints.
4991 FIXME, we still depend on big-endian host bitfield ordering.
4992 (sparc_print_insn): Set the insn_info_valid field, and the
4993 other fields that describe the instruction being printed.
4995 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4997 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4998 `jmp' instead of just one of them.
5000 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5002 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5003 (fput_fp_reg_r): Renamed from fput_reg_r.
5004 (fput_fp_reg): New function.
5005 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5007 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5009 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5011 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5013 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5015 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5016 don't output a space.
5018 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5020 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5022 * mips-opc.c: New file, containing opcode table from
5023 ../include/opcode/mips.h.
5024 * Makefile.in: Add it.
5026 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5028 * m88k-dis.c: New file, moved in from gdb and changed to use the
5029 new dis-asm.h disassembler interface.
5030 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5031 (m88k-dis.o): New target.
5033 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5035 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5036 argument string const char * to correspond to opcode/mips.h.
5038 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5040 * mips-dis.c: Updated to account for name changes in new version
5042 * Makefile.in: Added header file dependencies.
5044 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5046 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5048 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5050 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5051 extend, rather than shifts.
5053 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5055 * Makefile.in: Undo 15 June change.
5057 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5059 * m68k-dis.c (print_insn_arg): Change return value to byte count
5061 * m68k-dis.c: Re-write to detect invalid operands before
5062 printing anything, so we can handle this the same way we
5063 handle invalid opcodes.
5065 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5067 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5069 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5071 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5074 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5076 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5078 * configure.in: Do make sysdep.h link.
5079 * Makefile.in: Search ../include. Don't search ../bfd.
5081 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5083 Changes from Jeff Law, law@cs.utah.edu:
5084 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5085 Do not print a space before the completers specified by
5088 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5090 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5091 defined, since gdb has been fixed.
5093 Changes from Jeff Law, law@cs.utah.edu:
5094 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5095 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5096 be a *disassemble_info, not a *FILE.
5097 * hppa-dis.c: Support 'd', '!', and 'a'.
5098 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5099 * hppa-dis.c: Delete cases which are no longer needed.
5101 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5103 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5105 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5107 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5110 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5112 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5113 * configure.in: No longer need to configure to get sysdep.h.
5115 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5117 * Patches from Jeffrey Law <law@cs.utah.edu>.
5118 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5119 templates for 1.1 FP computational instructions.
5121 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5123 * h8500-dis.c (print_insn_h8500): Address argument is type
5125 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5128 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5129 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5131 * sparc-dis.c (compare_opcodes): Move static declaration to
5134 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5136 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5137 instruction, remove unimp hack from 'l' argument.
5139 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5141 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5144 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5146 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5147 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5150 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5152 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5153 arrays of string pointers to 2-d arrays of chars, to save
5156 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5158 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5159 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5161 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5163 * hppa-dis.c: New file from Utah, adapted to new disassembler
5165 * Makefile.in: Include it.
5167 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5169 * sh-dis.c, sh-opc.h: New files.
5171 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5173 * alpha-dis.c, alpha-opc.h: New files.
5175 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5177 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5180 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5182 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5184 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5186 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5189 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5191 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5192 and double percent signs a few places.
5194 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5196 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5197 Use info->print_address_func not print_address.
5199 * dis-buf.c (generic_print_address): New function.
5201 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5203 * Makefile.in: Add sparc-dis.c.
5204 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5206 Add `add' instruction to the set that get checked
5207 for a preceding `sethi' in order to print an absolute address.
5208 * (print_insn): Disassembly prefers real instructions.
5209 (is_delayed_branch): Speed up.
5210 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5211 Still missing some float ops, and needs testing.
5212 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5213 F_ALIAS. Use printf, not fprintf, when not passing a file
5215 (compare_opcodes): Check that identical instructions have
5216 identical opcodes, complain otherwise.
5219 * Include reg_names.
5221 Use dis-asm.h/read_memory_func interface.
5223 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5225 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5226 deliberately return non-zero to setjmp from longjmp. Otherwise
5227 this code fails to compile.
5229 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5231 * m68k-dis.c: Fix prototype for fetch_arg().
5233 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5235 * dis-buf.c: New file, for new read_memory_func interface.
5236 Makefile.in (OFILES): Include it.
5237 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5238 Use new read_memory_func interface.
5240 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5242 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5243 * h8500-opc.h: Fix couple of opcodes.
5245 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5247 * Makefile.in: add dvi & installcheck targets
5249 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5251 * Makefile.in: Update for h8500-dis.c.
5253 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5255 * h8500-dis.c, h8500-opc.h: New files
5257 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5259 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5260 ../include/dis-asm.h.
5261 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5262 and ../gdb/m68k-pinsn.c).
5263 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5264 and ../gdb/i386-pinsn.c).
5265 * m68881-ext.c: New file. Moved definition of
5266 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5267 * Makefile.in: Adjust for new files.
5268 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5269 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5270 can be dis-assembled.
5272 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5274 * mips-dis.c (print_insn_arg): Now returns void.
5276 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5278 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5279 files that use the macros.
5281 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5283 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5284 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5285 (CFILES): Added mips-dis.c.
5287 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5289 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5290 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5292 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5294 * Makefile.in: Improve *clean rules.
5295 * configure.in: Allow a default host.
5297 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5299 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5300 files include other sysdep files
5302 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5304 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5306 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5308 * configure.in: For host support, use ../bfd/configure.host
5309 so it stays in sync with the ../bfd/hosts database.
5311 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5313 * configure.in: use cpu-vendor-os triple instead of nested cases
5315 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5317 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5318 *always* the wrong one.
5320 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5322 * z8kgen.c: added copyright info
5324 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5326 * z8k-dis.c (unparse_instr): prettier tabs
5327 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5329 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5331 * configure.in: Add ncr* configuration.
5332 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5333 picayune ANSI compilers happy.
5335 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5337 * configure.in (i386): Make i386 and i486 synonymous for now.
5338 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5340 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5342 * Makefile.in (install): Fix typo.
5344 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5346 * Makefile.in (make): Remove obsolete crud.
5347 (sparc-opc.o): Avoid Sun Make VPATH bug.
5349 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5351 * Makefile.in: since there are no SUBDIRS, remove rule and
5352 references of subdir_do.
5354 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5356 * Makefile.in (install): Get the library name right here too.
5357 Don't install bfd.h, since it's unrelated to this library. No
5358 subdirs to recurse into, either.
5359 (CFILES): The source file has a .c suffix, not .o.
5361 * sparc-opc.c: New file, moved from BFD.
5362 * Makefile.in (OFILES): Build it.
5364 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5366 * z8k-dis.c: fixed forward refferences of some declarations.
5368 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5370 * Makefile.in: get the name of the library right
5372 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5374 * z8k-dis.c: knows how to disassemble z8k stuff
5375 * z8k-opc.h: new file full of z8000 opcodes
5379 version-control: never