1 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
3 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
4 extract_10U_store): New.
5 (print_insn_hppa): Add new completers.
7 * hppa-dis.c (signed_unsigned_names,mix_half_names,
8 saturation_names): New.
9 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
11 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
13 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
15 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
16 to decide to print a space.
18 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
20 * i386-dis.c: Add AMD athlon instruction support.
22 1999-08-10 Ian Lance Taylor <ian@zembu.com>
24 From Wally Iimura <iimura@microunity.com>:
25 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
26 overflow at end of address space.
27 (generic_print_address): Use sprintf_vma.
29 1999-08-08 Ian Lance Taylor <ian@zembu.com>
31 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
32 MKDEP. Rebuild dependencies.
33 * Makefile.in: Rebuild.
35 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
37 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
38 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
39 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
40 (print_insn_hppa): Add 64 bit condition completers.
42 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
44 * hppa-dis.c (print_insn_hppa): Change condition args to use
47 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
49 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
52 1999-07-21 Ian Lance Taylor <ian@zembu.com>
55 * configure.bat: Remove; obsolete.
57 1999-07-11 Ian Lance Taylor <ian@zembu.com>
59 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
60 (generic_strcat_address): Add cast to avoid warning.
61 * i386-dis.c: Initialize all structure fields to avoid warnings.
62 Add ATTRIBUTE_UNUSED as appropriate.
64 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
66 * sparc-dis.c (print_insn_sparc): Differentiate between
67 addition and oring when guessing symbol for comment.
69 1999-07-05 Nick Clifton <nickc@cygnus.com>
71 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
74 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
76 * i386-dis.c: Mention intel mode specials in macro char comment.
78 1999-06-21 Ian Lance Taylor <ian@zembu.com>
80 * alpha-dis.c: Don't include <stdlib.h>.
81 * arm-dis.c: Include "sysdep.h".
82 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
84 * Makefile.am: Rebuild dependencies.
85 * Makefile.in: Rebuild.
87 1999-06-16 Nick Clifton <nickc@cygnus.com>
89 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
92 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
94 * arm-dis.c (arm_regnames): Turn into a pointer to a register
96 (arm_regnames_standard): New variable: Array of ARM register
97 names according to ARM instruction set nomenclature.
98 (arm_regnames_apcs): New variable: Array of ARM register names
99 according to ARM Procedure Call Standard.
100 (arm_regnames_raw): New variable: Array of ARM register names
101 using just 'r' and the register number.
102 (arm_toggle_regnames): New function: Toggle the chosen register set
104 (parse_disassembler_options): New function: Parse any target
105 disassembler command line options.
106 (print_insn_big_arm): Call parse_disassembler_options if any
108 (print_insn_little_arm): Call parse_disassembler_options if any
111 1999-06-13 Ian Lance Taylor <ian@zembu.com>
113 * i386-dis.c (FWAIT_OPCODE): Define.
114 (used_prefixes): New static variable.
115 (fetch_data): Don't print an error message if we have already
116 fetched some bytes successfully.
117 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
118 (prefix_name): New static function.
119 (print_insn_i386): If setjmp fails, indicating a data error, but
120 we have managed to fetch some bytes, print the first one as a
121 prefix or a .byte pseudo-op. If fwait is followed by a non
122 floating point instruction, print the first prefix. Set
123 used_prefixes when prefixes are used. If any prefixes were not
124 used after disassembling the instruction, print the first prefix
125 instead of printing the instruction.
126 (putop): Set used_prefixes when prefixes are used.
127 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
128 (OP_DIR, OP_SIMD_Suffix): Likewise.
130 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
132 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
133 Support signx %reg, clruw %reg.
135 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
137 * sparc-opc.c: Add aliases Solaris as supports.
139 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
141 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
142 * Makefile.in: Regenerated.
144 1999-06-03 Philip Blundell <philb@gnu.org>
146 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
147 when target is PC-relative.
149 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
151 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
154 * m68k-dis.c (fetch_arg): Add places `n', `o'.
156 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
157 Add mcf5206e to appropriate instructions.
158 Add alias for MAC, MSAC.
160 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
163 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
164 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
166 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
168 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
170 * i386-dis.c (Ed): Define.
171 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
173 (OP_rm): Rename to OP_Rd.
176 (putop): Add const to template and p.
177 (print_insn_x86): Delete.
178 (print_insn_i386): Merge old function print_insn_x86. Add const
180 (struct dis386): Add const to name.
181 (dis386_att, dis386_intel): Add const.
182 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
183 (names32, names16, names8, names_seg, index16): Add const.
184 (grps, prefix_user_table, float_reg): Add const.
185 (float_mem_att, float_mem_intel): Add const.
186 (oappend): Add const to s.
187 (OP_REG): Add const to s.
188 (ptr_reg): Add const to s.
189 (dofloat): Add const to dp.
190 (OP_C): Don't skip modrm, it's now done in OP_Rd.
193 (OP_Rd): Check for valid mod. Call Op_E to print.
194 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
195 (OP_MS): Check for valid mod. Call Op_EM to print.
196 (OP_3DNowSuffix): Set obufp and use oappend rather than
197 strcat. Call BadOp() for errors.
198 (OP_SIMD_Suffix): Likewise.
199 (BadOp): New function.
201 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
203 * i386-dis.c (dis386_intel): Remove macro chars, except for
204 jEcxz. Change cWtR and cRtd to cW and cR.
205 (dis386_twobyte_intel): Remove macro chars here too.
206 (putop): Handle R and W macros for intel mode.
208 * i386-dis.c (SIMD_Fixup): New function.
209 (dis386_twobyte_att): Use it on movlps and movhps, and change
210 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
211 (dis386_twobyte_intel): Same here.
213 * i386-dis.c (Av): Remove.
217 (OP_SIMD_Suffix): New function.
218 (OP_DIR): Remove dead code.
219 (eAX_reg..eDI_reg): Renumber.
220 (onebyte_has_modrm): Table numbering comments.
221 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
222 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
223 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
224 and handle SIMD cmp insns in OP_SIMD_Suffix.
225 (info->bytes_per_line): Bump from 5 to 6.
227 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
228 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
230 PIII SIMD support from Doug Ledford <dledford@redhat.com>
231 * i386-dis.c (XM, EX, None): Define.
232 (OP_XMM, OP_EX, OP_None): New functions.
233 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
234 (GRP14): Rename to GRPAMD.
235 (GRP*): Add USE_GROUPS flag.
237 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
238 (twobyte_has_modrm): Add SIMD entries.
239 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
240 (grps): Add SIMD insns.
241 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
242 oappend repz if uses_f3_prefix. Add code to handle new groups for
245 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
246 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
247 operand from Av to Jv.
249 1999-05-07 Nick Clifton <nickc@cygnus.com>
251 * mcore-dis.c (print_insn_mcore): Use .short to display
252 unidentified instructions, not .word.
254 1999-04-26 Tom Tromey <tromey@cygnus.com>
256 * aclocal.m4, configure: Updated for new version of libtool.
258 1999-04-14 Doug Evans <devans@casey.cygnus.com>
260 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
261 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
263 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
265 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
268 1999-04-10 Doug Evans <devans@casey.cygnus.com>
270 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
271 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
273 1999-04-06 Ian Lance Taylor <ian@zembu.com>
275 * opintl.h (LC_MESSAGES): Never define.
277 1999-04-04 Ian Lance Taylor <ian@zembu.com>
279 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
280 (separator_char, scale_char): Likewise.
281 (print_insn_x86): Likewise.
282 (print_insn_i386): Likewise. Add declaration.
284 1999-03-26 Doug Evans <devans@casey.cygnus.com>
286 * fr30-dis.c: Rebuild.
287 * m32r-dis.c: Rebuild.
289 1999-03-23 Ian Lance Taylor <ian@zembu.com>
291 * m68k-opc.c: Change compare instructions to use "@s" rather than
292 ";s" when used with an immediate operand.
294 1999-03-22 Doug Evans <devans@casey.cygnus.com>
296 * cgen-opc.c (cgen_set_cpu): Delete.
297 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
298 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
300 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
302 * po/opcodes.pot: Rebuild.
304 1999-03-16 Martin Hunt <hunt@cygnus.com>
306 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
308 1999-03-11 Doug Evans <devans@casey.cygnus.com>
310 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
311 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
312 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
313 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
314 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
315 * m32r-opinst.c: Rebuild.
317 1999-02-25 Doug Evans <devans@casey.cygnus.com>
319 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
320 (cgen_hw_lookup_by_num): Rewrite.
321 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
322 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
323 * m32r-opinst.c: Rebuild.
325 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
327 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
328 (insert_jhint): Fix insertion mask.
329 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
331 1999-02-10 Doug Evans <devans@casey.cygnus.com>
333 * Makefile.in: Rebuild.
335 1999-02-09 Doug Evans <devans@casey.cygnus.com>
337 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
338 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
339 * Makefile.am: Remove references to them.
340 (HFILES): Add fr30-desc.h,m32r-desc.h.
341 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
343 (ALL_MACHINES): Update.
344 * configure.in: Redo handling of cgen_files.
345 (bfd_i960_arch): Delete i960c-*.lo files.
346 * configure: Regenerate.
347 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
348 (hash_insn_array): Rewrite.
349 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
350 (hash_insn_array): Rewrite.
351 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
352 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
353 (cgen_lookup_get_insn_operands): Ditto.
354 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
355 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
356 * po/POTFILES.in: Rebuild.
357 * po/opcodes.pot: Rebuild.
359 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
361 * Makefile.am: Rebuild dependencies.
362 (HFILES): Add fr30-opc.h.
363 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
364 * Makefile.in: Rebuild.
366 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
367 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
369 * acconfig.h: Remove.
370 * configure: Rebuild with current autoconf/automake.
371 * aclocal.m4: Likewise.
372 * config.in: Likewise.
373 * Makefile.in: Likewise.
375 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
377 * m68k-opc.c: Correct move (not movew) to status word on 5200.
379 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
381 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
382 * i386-dis.c (x_mode): Define.
386 (dis386_twobyte): Remove.
387 (dis386_twobyte_att): New.
388 (dis386_twobyte_intel): New.
389 (print_insn_x86): Use new arrays.
391 (float_mem_intel): New.
392 (float_mem_att): New.
393 (dofloat): Use new float_mem arrays.
394 (print_insn_i386_att): New.
395 (print_insn_i386_intel): New.
396 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
397 (putop): Handle intel syntax.
398 (OP_indirE): Handle intel syntax.
399 (OP_E): Handle intel syntax.
400 (OP_I): Handle intel syntax.
401 (OP_sI): Handle intel syntax.
402 (OP_OFF): Handle intel syntax.
406 1999-01-27 Doug Evans <devans@casey.cygnus.com>
408 * fr30-opc.h,fr30-opc.c: Rebuild.
409 * i960c-opc.h,i960c-opc.c: Rebuild.
410 * m32r-opc.c: Rebuild.
412 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
414 * hppa-dis.c: revert HP merge changes until HP gives us
417 1999-01-19 Nick Clifton <nickc@cygnus.com>
419 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
420 offsets as well as symbloic address.
422 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
424 * hppa-dis.c: fix comments and some indentation.
426 1999-01-12 Doug Evans <devans@casey.cygnus.com>
428 * fr30-opc.c,i960c-opc.c: Regenerate.
430 1999-01-11 Doug Evans <devans@casey.cygnus.com>
432 * fr30-opc.c: Regenerate.
434 1999-01-06 Doug Evans <devans@casey.cygnus.com>
436 * m32r-dis.c: Regenerate.
438 1999-01-05 Doug Evans <devans@casey.cygnus.com>
440 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
441 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
442 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
444 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
446 * configure.in: Require autoconf 2.12.1 or higher.
448 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
450 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
452 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
454 * fr30-opc.c: Regenerated.
456 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
458 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
460 1998-12-15 Dave Brolley <brolley@cygnus.com>
462 * fr30-opc.c,fr30-opc.h: Regenerated.
464 1998-12-14 Dave Brolley <brolley@cygnus.com>
466 * fr30-opc.c,fr30-opc.h: Regenerated.
468 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
470 * fr30-opc.c,fr30-opc.h: Regenerated.
472 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
474 * m32r-opc.c: Regenerate.
476 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
478 * dis-buf.c (generic_strcat_address): reformat to GNU coding
479 conventions. change sprintf call to an sprintf_vma call.
481 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
483 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
485 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
487 The following changes were made by
488 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
489 David Taylor <taylor@texas.cygnus.com>, and
490 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
491 merge in changes by HP; HP did not create ChangeLog entries.
493 * dis-buf.c (generic_strcat_address): new function.
495 * hppa-dis.c: Changes to improve hppa disassembly.
496 Changed formatting in : reg_names, fp_reg_names,control_reg,
497 New variables : sign_extension_names, deposit_names, conversion_names
498 float_test_names, compare_cond_names_double, add_cond_names_double,
499 logical_cond_names_double, unit_cond_names_double,
500 branch_push_pop_names, saturation_names, shift_names, mix_names,
501 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
502 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
503 (fput_const): renamed as fput_hex_const
505 - use the macros fputs_filtered and
506 fput_decimal_const whenever possible; calls to sign_extend require
507 2 params -- add a missing second param of 0.
508 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
509 architecture version number of current machine. HP folks are
510 trying to handle situation where the target program was compiled
511 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
513 - added new cases : 'g', 'B', 'm'
514 - added cases specifically for PA 2.0
515 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
516 - calls to fput_const become calls to fput_hex_const
518 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
520 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
521 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
522 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
523 * Makefile.in: Rebuilt.
524 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
526 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
527 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
529 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
531 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
533 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
535 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
537 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
538 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
540 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
542 * fr30-opc.c: Regenerate.
544 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
546 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
548 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
550 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
552 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
554 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
556 1998-11-30 Doug Evans <devans@casey.cygnus.com>
558 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
559 CGEN_INSN_BASE_VALUE.
560 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
561 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
563 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
565 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
567 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
569 * fr30-asm.c,fr30-dis.c: Regenerated.
571 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
573 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
575 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
577 * fr30-opc.c: Regenerated.
579 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
581 * fr30-opc.c: Regenerated.
582 * fr30-opc.h: Regenerated.
583 * fr30-dis.c: Regenerated.
584 * fr30-asm.c: Regenerated.
586 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
588 * mips-opc.c (sync.p,sync.l): Swap insn values.
590 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
592 * fr30-opc.c: Regenerate.
594 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
596 * fr30-opc.c: Regenerated.
597 * fr30-opc.h: Regenerated.
599 1998-11-18 Doug Evans <devans@casey.cygnus.com>
601 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
602 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
604 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
606 * fr30-opc.c: Regenerated.
608 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
610 * fr30-opc.c: Regenerated.
611 * fr30-opc.h: Regenerated.
612 * fr30-dis.c: Regenerated.
613 * fr30-asm.c: Regenerated.
615 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
617 * po/opcodes.pot: Regenerated.
618 * fr30-opc.c: Regenerated.
619 * fr30-opc.h: Regenerated.
620 * fr30-dis.c: Regenerated.
621 * fr30-asm.c: Regenerated.
623 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
625 * disassemble.c (disassembler): Add support for FR30 target.
627 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
629 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
630 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
632 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
634 * po/opcodes.pot: Regenerate.
635 * po/POTFILES.in: Regenerate.
636 * fr30-opc.c: Regenerate.
637 * fr30-opc.h: Regenerate.
639 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
641 * m32r-asm.c: Regenerate.
643 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
645 * configure.in: Added case for bfd_fr30_arch.
646 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
647 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
648 (CLEANFILES): Added stamp-fr30.
650 * fr30-asm.c: New file.
651 * fr30-dis.c: New file.
652 * fr30-opc.c: New file.
653 * fr30-opc.h: New file.
654 * po/POTFILES.in: Regenerated
655 * po/opcodes.pot: Regenerated
657 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
659 * configure.in: detect cygwin* instead of cygwin32*
660 * configure: regenerate
662 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
664 * mips-opc.c (IS_M): Added.
666 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
668 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
670 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
672 * m32r-opc.h,m32r-opc.c: Regenerate.
674 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
676 * i386-dis.c (OP_3DNowSuffix): New static function.
679 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
680 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
681 (insn_codep): New static variable.
682 (print_insn_x86): Init insn_codep after prefixes.
683 (grps): Add GRP14 entries for prefetch, prefetchw.
686 From Jeff B Epler <jepler@usgs.gov>
687 * i386-dis.c (Suffix3DNow): New table.
689 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
691 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
693 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
695 * d10v-dis.c (print_operand): If num is nonzero, then
696 add OPERAND_ACC1, not OPERAND_ACC0.
698 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
700 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
703 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
705 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
708 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
710 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
712 1998-09-09 Michael Meissner <meissner@cygnus.com>
714 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
717 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
719 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
721 (print_insn_little_arm): Detect Thumb symbols in elf object
724 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
726 * alpha-dis.c (print_insn_alpha): Use the machine type to
727 decide which PALcode set to include.
729 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
731 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
733 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
735 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
736 MSUB and MSUBS instructions.
738 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
740 * ppc-opc.c (powerpc_operands): Omit parens around additions in
743 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
745 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
746 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
747 +, -, and d for ColdFire.
749 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
750 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
751 (extract_mbe): Likewise.
753 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
755 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
757 * m10300-opc.c: First cut at UDF instructions.
759 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
761 * m32r-opc.c: Regenerate (remove semantic descriptions).
763 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
765 * arm-dis.c (print_insn_big_arm): Fix indentation.
766 (print_insn_little_arm): Likewise.
768 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
770 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
772 (print_insn_little_arm): Likewise.
774 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
776 Move all global state data into opcode table struct, and treat
777 opcode table as something that is "opened/closed".
778 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
779 (cgen_asm_init): Delete.
780 (cgen_set_parse_operand_fn): New function.
781 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
782 (cgen_dis_init): Delete.
783 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
784 (cgen_current_{opcode_table_mach,endian}): Delete.
785 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
787 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
789 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
792 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
794 * m10300-opc.c: Add entries for "no_match_operands" field in
797 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
799 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
801 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
803 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
805 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
807 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
809 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
811 (OP_J): Remove unnecessary subtraction when 16-bit displacement
812 will be masked later.
814 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
816 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
818 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
820 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
822 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
824 * m10300-dis.c: Only recognize instructions from the currently
826 * m10300-opc.c: Add field indicating the particular variant of
827 the mn10300 each instruction is available on.
829 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
831 * configure.in: For bfd_vax_arch, build vax-dis.lo.
832 * Makefile.am: Rebuild dependencies.
833 (CFILES): Add vax-dis.c.
834 (ALL_MACHINES): Add vax-dis.lo.
835 * aclocal.m4: Rebuild with current libtool.
836 * configure, Makefile.in: Rebuild.
838 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
840 * vax-dis.c: New file, from work by Pauline Middelink
841 <middelin@polyware.iaf.nl>.
842 * disassemble.c (ARCH_vax): Define if ARCH_all.
843 (disassembler): Add case for ARCH_vax.
844 * makefile.vms: Support compilation on vms/vax.
846 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
848 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
849 related to sign extension and the size of ints.
851 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
853 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
854 instructions. Support (sp) addressing mode by expanding it into
857 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
859 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
861 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
863 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
865 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
867 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
870 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
872 * mips-dis.c (print_insn_little_mips): Previously, instruction
873 printing references the symbol table to determine whether the
874 instruction resides in a block regular instructions or mips16
875 instructions. However, when the disassembler gets used in other
876 environments where the symbol table is not present, we no longer
877 rely in the symbol table, rather, use the low bit of the
878 instructions address to guess. There should be no change for usage
879 of the disassembler in host based programs, gdb, objdump.
880 (print_insn_big_mips): ditto.
881 (print_insn_mips): ditto
883 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
885 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
887 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
889 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
891 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
893 * i386-dis.c (index16): Add '%' to register names. Use ','
896 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
898 * i386-dis.c: Don't print opcode suffix when we can figure out the
899 size (and gas can!) by register operands, or from the default
901 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
903 (dis386, dis386_twobyte, grps): Use new suffix macros.
904 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
905 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
906 order of cmps operands to agree with Intel docs. Correct operand
907 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
908 agree with Intel docs.
909 (print_insn_x86): Print orphan fwait before other prefixes.
910 Return correct byte count for orphan fwait with prefixes. Don't
911 print `bound' operands in reverse order.
912 (ckprefix): Stop accumulating prefixes if we get fwait.
913 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
915 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
917 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
918 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
920 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
922 Fix problems when bfd_vma is wider than long.
923 * i386-dis.c: Make op_address and start_pc unsigned.
924 (set_op): Make parameter unsigned.
925 (print_insn_x86): Cast to bfd_vma when passing a value to
927 * ns32k-dis.c (CORE_ADDR): Don't define.
928 (print_insn_ns32k): Change type of addr to bfd_vma. Use
929 bfd_scan_vma to read back address.
930 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
932 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
933 (NEXTULONG): New definition.
934 (print_insn_m68k): Avoid overflow when computing third argument of
936 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
937 Use disp instead of val to store offset values.
938 (print_indexed): Use base_disp instead of word to store base
939 displacement, to avoid overflow.
940 * m10300-dis.c (disassemble): Cast value to long when computing
941 pc-relative address, to get correct sign extension.
943 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
945 * m32r-opc.c: Regenerate.
947 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
949 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
950 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
952 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
954 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
956 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
958 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
960 (OP_DSreg): Rename from OP_DSSI.
961 (OP_ESreg): Rename from OP_ESDI.
962 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
964 (append_seg): Rename from append_prefix.
965 (ptr_reg): New function.
966 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
968 (PREFIX_ADDR): Rename from PREFIX_ADR.
969 (float_reg): Add non-broken opcodes for people who don't want
972 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
974 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
977 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
979 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
981 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
983 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
984 0; produce error message for shifts of size 32 (or 64 for 64-bit
985 shifts), because the hardware doesn't support them.
987 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
989 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
990 LONG_2, LONG_2b formats to use this new operand.
992 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
994 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
996 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
998 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1001 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1003 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1004 and SHORT_B3b formats to use Rb instead of Ra.
1006 Add FLAG_MUL16 to MUL2XH opcode.
1008 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1009 to existing 1.1.1 parallelisation prohibition procedure.
1011 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1013 * m32r-asm.c,m32r-dis.c: Regenerate.
1015 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1017 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1018 with a shift count of 0.
1020 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1022 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1023 (cgen_hw_lookup_by_num): New function.
1025 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1027 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1029 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1031 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1032 as big-endian on SPARClite.
1034 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1036 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1038 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1040 * po/Make-in (install-info): New target.
1042 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1044 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1045 * configure: Rebuild.
1047 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1049 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1050 variety of ISA2 instructions to set bottom ten bits of trap code.
1052 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1054 * Makefile.am (config.status): Add explicit target so that
1055 config.status depends upon bfd/configure.in.
1056 * Makefile.in: Rebuild.
1058 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1060 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1061 instructions to set bottom ten bits of break code.
1062 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1063 for above optional argument.
1065 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1067 * makefile.vms: Run dec c with /nodebug.
1069 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1071 * Makefile.in: Rebuilt.
1072 * Makefile.am: Regenerated dependencies with mkdep.
1074 * opintl.h (_): Define as dgettext.
1076 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1078 * cgen-asm.c: Internationalised.
1079 * m32r-asm.c: Internationalised.
1080 * m32r-dis.c: Internationalised.
1081 * m32r-opc.c: Internationalised.
1083 * aclocal.m4: Regenerated.
1084 * configure: Regenerated.
1085 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1086 * Makefile.in: Rebuild.
1087 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1088 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1090 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1092 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1094 * aclocal.m4, configure: Rebuild with current tools.
1096 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1098 * opintl.h: New file - contains internationalisation macros used
1099 by source files in this directory.
1100 * po/: New subdirectory - contains internationalisation files.
1101 * po/Make-in: New file - Makefile constructor.
1102 * po/POTFILES.in: New file - list of files in opcodes directory
1103 that should be scan for internationalisation macros.
1104 * po/opcodes.pot: New file - list of internationisation strings
1105 found in files mentioned in po/POTFILES.in.
1106 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1107 entry. Add intl directory to include paths.
1108 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1109 HAVE_STRCPY, HAVE_LC_MESSAGES
1110 * configure.in: Add rule to build Makefile in po subdirectory.
1111 * Makefile.in: Rebuilt.
1112 * aclocal.m4: Rebuilt.
1113 * config.in: Rebuilt.
1114 * configure: Rebuilt.
1115 * alpha-opc.c: Internationalised.
1116 * arc-dis.c: Internationalised.
1117 * arc-opc.c: Internationalised.
1118 * arm-dis.c: Internationalised.
1119 * cgen-asm.c: Internationalised.
1120 * d30v-dis.c: Internationalised.
1121 * dis-buf.c: Internationalised.
1122 * h8300-dis.c: Internationalised.
1123 * h8500-dis.c: Internationalised.
1124 * i386-dis.c: Internationalised.
1125 * m10200-dis.c: Internationalised.
1126 * m10300-dis.c: Internationalised.
1127 * m68k-dis.c: Internationalised.
1128 * m88k-dis.c: Internationalised.
1129 * mips-dis.c: Internationalised.
1130 * ns32k-dis.c: Internationalised.
1131 * opintl.h: Internationalised.
1132 * ppc-opc.c: Internationalised.
1133 * sparc-dis.c: Internationalised.
1134 * v850-dis.c: Internationalised.
1135 * v850-opc.c: Internationalised.
1137 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1139 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1140 (asm_hash_table_entries): New variable.
1141 (cgen_asm_init): Free asm_hash_table_entries.
1142 (hash_insn_array,hash_insn_list): New functions.
1143 (build_asm_hash_table): Use them. Hash macro insns as well.
1144 (cgen_asm_lookup_insn): Update.
1145 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1146 (dis_hash_table_entries): New variable.
1147 (cgen_dis_init): Free dis_hash_table_entries.
1148 (hash_insn_array,hash_insn_list): New functions.
1149 (build_dis_hash_table): Use them. Hash macro insns as well.
1150 (cgen_dis_lookup_insn): Update.
1151 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1152 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1153 (cgen_macro_insn_count): New function.
1154 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1156 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1158 * i386-dis.c (OP_DSSI): Print segment override.
1160 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1162 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1165 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1167 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1168 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1169 * configure.in: Define and substitute WIN32LDFLAGS and
1171 * aclocal.m4: Rebuild with new libtool.
1172 * configure, Makefile.in: Rebuild.
1174 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1176 * m32r-opc.c: Regenerate.
1178 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1180 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1181 before trying to copy it.
1182 * Makefile.in: Rebuild.
1184 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1186 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1188 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1190 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1191 from an arbitrary valid buffer instead of fetching them on demand
1193 (invalid_float): use bit_extract_simple() instead of bit_extract().
1195 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1197 From H.J. Lu <hjl@gnu.org>:
1198 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1201 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1203 * Branched binutils 2.9.
1205 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1207 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1208 disassembling last 4 bytes of a section.
1210 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1212 Fix some gcc -Wall warnings:
1213 * arc-dis.c (print_insn): Add casts to avoid warnings.
1214 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1215 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1216 * m10200-dis.c (disassemble): Likewise.
1217 * m10300-dis.c (disassemble): Likewise.
1218 * ns32k-dis.c (print_insn_ns32k): Likewise.
1219 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1220 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1221 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1222 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1223 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1224 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1225 * tic80-dis.c (print_one_instruction): Likewise.
1226 * w65-dis.c (print_operand): Likewise.
1227 * z8k-dis.c (fetch_data): Likewise.
1228 * a29k-dis.c: Add return type for find_byte_func_type.
1229 * arc-opc.c: Include <stdio.h>. Remove declarations of
1230 insert_multshift and extract_multshift.
1231 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1233 (extract_value): Fully parenthesize expression.
1234 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1235 * h8500-opc.h (h8500_table): Fully bracket initializer.
1236 * w65-opc.h (optable): Likewise.
1237 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1238 * i386-dis.c (OP_E): Initialize local variables.
1239 * m10200-dis.c (print_insn_mn10200): Likewise.
1240 * mips-dis.c (print_insn_mips16): Likewise.
1241 * sh-dis.c (print_insn_shx): Likewise.
1242 * v850-dis.c (print_insn_v850): Likewise.
1243 * ns32k-dis.c (print_insn_arg): Declare.
1244 (get_displacement, invalid_float): Declare.
1245 (list_search, sign_extend, flip_bytes): Declare return type.
1246 (get_displacement): Likewise.
1247 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1249 (print_insn_ns32k): Make i unsigned.
1250 (invalid_float): Make static. Declare type of val.
1251 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1252 on each for iteration.
1253 * tic30-dis.c (get_indirect_operand): Likewise.
1254 * z8k-dis.c (print_insn_z8001): Declare return type.
1255 (print_insn_z8002): Likewise.
1256 (unparse_instr): Fix sprintf format strings.
1258 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1260 * mips-opc.c: Add "sync.l" and "sync.p".
1262 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1264 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1265 default m68k variant to recognize.
1267 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1268 (ctrl, cobr, mem, ea): Likewise.
1269 (print_addr): Likewise. Remove cast.
1270 (ea): Cast argument of print_addr to bfd_vma.
1272 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1274 (cgen_parse_unsigned_integer): Likewise.
1275 (cgen_parse_address): Likewise.
1277 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1279 * i960-dis.c (ctrl): Add full braces to structure initialization.
1280 (cobr, mem, reg): Likewise.
1281 (ea): Correct parenthesization in expression.
1283 * cgen-asm.c: Include <ctype.h>.
1284 (build_asm_hash_table): Remove unused local variable i.
1285 (cgen_parse_keyword): Add casts to avoid warnings.
1287 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1288 symbol. Fix indentation.
1289 (print_insn_little_arm): Likewise.
1291 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1293 * configure.in: Use AM_DISABLE_SHARED.
1294 * aclocal.m4, configure: Rebuild with libtool 1.2.
1296 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1298 These patches are courtesy of Jonathan Walton and Tony Thompson
1299 (athompso@cambridge.arm.com).
1301 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1304 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1305 both the offset and the label closest to the destination.
1307 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1309 * m32r-opc.h: Regenerate.
1311 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1313 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1315 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1317 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1318 assume that info->symbols is non-empty.
1320 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1322 * alpha-opc.c (cvtqs) There is no such thing.
1323 (cvttq): Missing most of the /*d variants.
1325 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1327 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1328 delayed branches or jumps.
1330 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1332 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1334 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1335 * tic30-dis.c (print_branch): Likewise.
1337 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1339 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1340 saved_symbol code as it is no longer needed.
1342 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1344 * cgen-asm.c: Include symcat.h.
1345 * cgen-dis.c,cgen-opc.c: Ditto.
1346 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1348 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1350 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1352 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1354 * m32r-opc.[ch]: Regenerate.
1356 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1358 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1359 arguments. Don't perform validation here.
1360 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1362 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1364 * m32r-opc.c: Regenerate.
1366 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1368 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1369 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1371 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1373 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1375 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1377 * configure.in: Get the version number from BFD.
1378 * configure: Rebuild.
1380 From H.J. Lu <hjl@gnu.org>:
1381 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1382 * Makefile.in: Rebuild.
1384 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1386 * m32r-opc.c: Regenerate.
1387 * m32r-opc.h: Regenerate.
1389 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1391 * m32r-opc.c: Regenerate.
1393 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1395 Fix rac to accept only a0:
1396 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1397 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1398 Introduce OPERAND_GPR.
1399 * d10v-dis.c (print_operand): Likewise.
1401 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1403 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1404 (cgen_hw_lookup): Make result const.
1405 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1407 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1409 * configure, aclocal.m4: Rebuild with new libtool.
1411 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1413 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1414 instructions use a PC relative branch, not absolute.
1416 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1418 * configure.in: Set libtool_enable_shared rather than
1419 libtool_shared. Remove diversion hack.
1420 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1422 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1424 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1425 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1427 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1429 * tic30-dis.c: New file.
1430 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1431 * configure.in: Handle bfd_tic30_arch.
1432 * Makefile.am: Rebuild dependencies.
1433 (CFILES): Add tic30-dis.c
1434 (ALL_MACHINES): Add tic30-dis.lo.
1435 * configure, Makefile.in: Rebuild.
1437 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1439 * m32r-opc.h (HAVE_CPU_M32R): Define.
1441 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1443 * v850-opc.c (insertion routines): If both alignment and size is
1444 wrong then report this.
1446 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1448 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1449 Only recognize instructions for the current target_processor.
1451 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1453 * d10v-dis.c (PC_MASK): Correct value.
1454 (print_operand): If there's a reloc, don't calculate the
1455 address because they could be in different sections.
1457 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1459 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1460 instruction after the 4650's "mul" instruction; nobody's using the
1461 4010 these days. If object files someday indicate which processor
1462 variant they're intended for, we can do a better job at this.
1464 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1466 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1467 table provided entry size. Use CGEN_INSN_MNEMONIC.
1468 (cgen_parse_keyword): Rewrite.
1469 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1470 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1471 * cgen-opc.c: Clean up pass over `struct foo' usage.
1472 (cgen_keyword_lookup_value): Handle "" entry.
1473 (cgen_keyword_add): Likewise.
1475 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1477 * mips-opc.c: Add FP_D to s.d instruction flags.
1479 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1481 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1483 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1485 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1486 PC relative offset forms before the 15 bit forms. An assembler command
1487 line option now chooses the default.
1489 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1491 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1492 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1494 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1496 * configure: Only build libopcodes shared if --enable-shared's value
1497 was `yes', or was set to `*opcodes*'.
1498 * aclocal.m4: Likewise.
1499 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1500 original source of this bit of code. It's not clear what the best fix
1503 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1505 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1506 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1507 offset forms before the 15 bit forms, to default to the long forms.
1509 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1511 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1513 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1515 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1516 symbol if none is present.
1517 (print_insn_big_arm): Prevent examination of stored symbol if
1520 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1522 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1524 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1526 * disassemble.c: Remove disasm_symaddr() function.
1528 * arm-dis.c: Use info->symbol instead of info->flags to determine
1529 if disassmbly should be in Thumb or Arm mode.
1531 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1533 * arm-dis.c: Add support for disassembling Thumb opcodes.
1534 (print_insn_thumb): New function.
1536 * disassemble.c (disasm_symaddr): New function.
1538 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1539 (thumb_opcodes): Table of Thumb opcodes.
1541 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1543 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1545 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1546 and 'v' as operand types.
1548 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1550 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1551 <olivier.carmona@di.epfl.ch>.
1552 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1553 which has a two word opcode with a one word argument.
1555 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1557 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1558 unsigned, not signed.
1559 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1561 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1563 * d10v-dis.c (print_operand):
1564 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1566 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1568 * d10v-opc.c (OPERAND_FLAG): Split into:
1569 (OPERAND_FFLAG, OPERAND_CFLAG) .
1573 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1575 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1576 field for all INSN_MACRO's.
1577 * mips16-opc.c: same
1579 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1581 * mips-opc.c (sync,cache): These are 3900 insns.
1583 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1585 sh-opc.h (sh_table): Remove ftst/nan.
1587 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1589 * mips-opc.c (ffc, ffs): Fix mask.
1591 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1593 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1596 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1598 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1599 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1601 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1603 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1604 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1606 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1608 * v850-dis.c (disassemble): Replace // with /* ... */
1610 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1612 * sparc-opc.c: Add wr & rd for v9a asr's.
1613 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1614 (v9a_asr_reg_names): New variable.
1615 Patch from David Miller <davem@vger.rutgers.edu>.
1617 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1619 * sparc-opc.c (v9notv9a): New insn type.
1620 (IMPDEP): Move to the end to not conflict with edge8 et al.
1621 Patch from David Miller <davem@vger.rutgers.edu>.
1623 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1625 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1627 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1629 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1631 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1633 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1634 of disassemble_info structure to determine if an overlay address
1635 has a matching symbol in low memory.
1637 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1638 new symbol_at_address_func field in disassemble_info structure.
1640 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1642 * v850-opc.c (extract_d22): Use signed arithmatic.
1644 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1646 * mips-opc.c: Three op mult is not an ISA insn.
1648 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1650 * mips-opc.c: Fix formatting.
1652 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1654 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1655 than assuming that char is signed. Explicitly sign extend 16 bit
1656 values, rather than assuming that short is 16 bits.
1657 (OP_sI, OP_J, OP_DIR): Likewise.
1659 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1661 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1664 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1666 * v850-opc.c: Fix typo in comment.
1668 * v850-dis.c (disassemble): Add test of processor type when
1669 determining opcodes.
1671 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1673 * configure.in: Use a diversion to set enable_shared before the
1674 arguments are parsed.
1675 * configure: Rebuild.
1677 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1679 * m68k-opc.c (TBL1): Use ! rather than `.
1680 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1682 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1686 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1688 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1691 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1692 * aclocal.m4: Rebuild with new libtool.
1693 * configure: Rebuild.
1695 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1697 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1699 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1701 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1703 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1705 * v850-opc.c (v850_opcodes): Further rearrangements.
1707 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1709 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1711 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1713 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1716 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1718 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1720 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1722 * v850-opc.c: Initialise processors field of v850_opcode structure.
1724 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1726 Merge changes from Martin Hunt:
1728 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1730 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1731 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1732 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1734 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1736 * d30v-dis.c (print_insn): First operand of d*i (delayed
1737 branch) instructions is relative.
1739 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1740 (d30v_operand_table): Add IMM6S3 type.
1741 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1743 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1744 and cmp instructions.
1746 * d30v-opc.c: Correct entries for repeat*, and sat*.
1747 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1748 types. Correct several formats.
1750 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1752 * d30v-opc.c (pre_defined_registers): Change control registers.
1754 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1755 SHORT_C2. Manual was incorrect.
1757 * d30v-dis.c (lookup_opcode): Return value now indicates
1758 if an opcode has a short and a long form. Used for deciding
1759 to append a ".s" or ".l".
1760 (print_insn): Append a ".s" to an instruction if it is
1761 the short form and ".l" if it is a long form. Do not append
1762 anything if the instruction has only one possible size.
1764 * d30v-opc.c: Change mulx2h to require an even register.
1765 New form: SHORT_A2; a SHORT_A form that needs an even
1766 register as the first operand.
1768 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1769 instruction was not being disassembled if there were an odd
1770 number of instructions.
1772 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1774 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1776 * v850-dis.c (disassemble): Improved display of register lists.
1778 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1780 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1781 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1782 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1783 fandnot1s, fandnot2s.
1785 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1787 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1789 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1791 * cgen-asm.c (cgen_parse_address): New argument resultp.
1792 All callers updated.
1793 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1795 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1797 * mn10200-dis.c (disassemble): PC relative instructions are
1798 relative to the next instruction, not the current instruction.
1800 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1802 * v850-dis.c (disassemble): Only signed extend values that are not
1803 returned by extract functions.
1804 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1806 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-opc.c: Update comments. Remove use of
1809 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1811 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1813 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1815 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1817 * configure: Rebuilt with latest devo autoconf for NT support.
1819 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1821 * v850-dis.c (disassemble): Use curly brace syntax for register
1824 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1825 where r0 is being used as a destination register.
1827 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1829 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1831 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1833 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1835 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1837 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1838 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1841 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1843 * configure (cgen_files): Add support for v850e target.
1844 * configure.in (cgen_files): Add support for v850e target.
1846 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1848 * configure (cgen_files): Add support for v850ea target.
1849 * configure.in (cgen_files): Add support for v850ea target.
1851 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1853 * configure.in (bfd_arc_arch): Add.
1854 * configure: Rebuild.
1855 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1856 * Makefile.in: Rebuild.
1857 * arc-dis.c, arc-opc.c: New files.
1858 * disassemble.c (ARCH_all): Define ARCH_arc.
1859 (disassembler): Add ARC support.
1861 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1863 * v850-dis.c (disassemble): Add support for v850EA instructions.
1865 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1866 (v850_opcodes): Add v850EA instructions.
1868 * v850-dis.c (disassemble): Add support for v850E instructions.
1870 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1871 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1872 insert_spe, extract_spe): New Functions.
1873 (v850_opcodes): Add v850E instructions.
1875 * v850-opc.c: Reorganised and re-layed out to improve readability
1878 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1880 * configure: Rebuild with autoconf 2.12.1.
1882 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1884 * aclocal.m4, configure: Rebuild with new automake patches.
1886 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1888 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1889 * acinclude.m4: Just include acinclude.m4 from BFD.
1890 * aclocal.m4, configure: Rebuild.
1892 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1894 * Makefile.am: New file, based on old Makefile.in.
1895 * acconfig.h: New file.
1896 * acinclude.m4: New file.
1897 * stamp-h.in: New file.
1898 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1899 Removed shared library handling; now handled by libtool. Replace
1900 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1901 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1902 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1903 handling in AC_OUTPUT.
1904 * dep-in.sed: Change .o to .lo.
1905 * Makefile.in: Now built with automake.
1906 * aclocal.m4: Now built with aclocal.
1907 * config.in, configure: Rebuild.
1909 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1911 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1913 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1915 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1917 * sparc-dis.c (sorted_opcodes): New static local.
1918 (struct opcode_hash): `opcode' is pointer to const element.
1919 (build_hash): First arg is now table of sorted pointers.
1920 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1921 (compare_opcodes): Update.
1923 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1925 * cgen-opc.c: #include <ctype.h>.
1926 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1927 Handle case insensitive hashing.
1928 (hash_keyword_value): Change type of `value' to unsigned int.
1930 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1932 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1933 precision FP, mark it as such. Likewise for double precision
1934 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1937 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1939 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1941 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1942 nesting depth when all the macros are expanded.
1944 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1946 * sparc-opc.c: The fcmp v9a instructions take an integer register
1947 as a destination, not a floating point register. From Christian
1948 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1950 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1952 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1953 syntax. From Roman Hodek
1954 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1956 * i386-dis.c (twobyte_has_modrm): Fix pand.
1958 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1960 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1962 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1964 * arm-dis.c: Add prototypes for arm_decode_shift and
1967 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1969 * mips-opc.c: Add r3900 insns.
1971 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1973 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1974 print delay slot instructions on the same line. When using a PC
1975 relative load, add a comment with the value being loaded if it can
1978 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1980 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1981 to pushS/popS for segment regs and byte constant so that
1982 pushw/popw printed when in 16 bit data mode.
1984 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1985 print cbtw, cwtd in 16 bit data mode.
1986 * i386-dis.c (putop): extra case W to support above.
1988 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1989 address size prefix in 16 bit address mode.
1991 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1993 * sh-dis.c: Reindent. Rename local variable fprintf to
1996 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1998 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2000 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2002 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2004 * mips16-opc.c (mip16_opcodes): same.
2006 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2008 * m68k-opc.c (moveb): Change $d to %d.
2010 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2013 (twobyte_has_modrm): Likewise.
2015 (OP_MMX, OP_EM, OP_MS): New static functions.
2017 * i386-dis.c: Revert patch of April 4. The output now matches
2020 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2022 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2025 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2027 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2029 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2031 * Makefile.in (install): Depend upon installdirs.
2032 (installdirs): New target.
2034 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2036 From Thomas Graichen <graichen@rzpd.de>:
2037 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2038 * configure: Rebuild.
2040 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2042 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2043 Delete string{,s}.h support.
2045 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2047 * cgen-asm.c (cgen_parse_operand_fn): New global.
2048 (cgen_parse_{{,un}signed_integer,address}): Update call to
2049 cgen_parse_operand_fn.
2050 (cgen_init_parse_operand): New function.
2051 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2052 from cgen_asm_init_parse.
2053 (m32r_cgen_assemble_insn): New operand `errmsg'.
2054 Delete call to as_bad, return error message to caller.
2055 (m32r_cgen_asm_hash_keywords): #if 0 out.
2057 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2059 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2061 [case 'J']: Fix typo in register name.
2063 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2065 * configure.in: Substitute SHLIB_LIBS.
2066 * configure: Rebuild.
2067 * Makefile.in (SHLIB_LIBS): New variable.
2068 ($(SHLIB)): Use $(SHLIB_LIBS).
2070 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2072 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2074 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2076 * disassemble.c (disassembler): Handle m32r.
2078 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2081 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2082 * Makefile.in (CFILES): Add them.
2083 (ALL_MACHINES): Add them.
2084 (dependencies): Regenerate.
2085 * configure.in (cgen_files): New variable.
2086 (bfd_m32r_arch): Add entry.
2087 * configure: Regenerate.
2089 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2091 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2092 * configure: Rebuild.
2094 * Makefile.in: Rebuild dependencies.
2096 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2098 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2101 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2103 * Branched binutils 2.8.
2105 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2107 * m10200-dis.c: Rename from mn10200-dis.c.
2108 * m10200-opc.c: Rename from mn10200-opc.c.
2109 * m10300-dis.c: Rename from mn10300-dis.c
2110 * m10300-opc.c: Rename from mn10300-opc.c.
2111 * Makefile.in: Update accordingly.
2113 * mips16-opc.c: Add mul and dmul macros.
2115 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2117 * makefile.vms: Update CFLAGS, add clean target.
2119 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2121 * mips-opc.c: Add "wait". From Ralf Baechle
2122 <ralf@gnu.ai.mit.edu>.
2124 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2125 * configure, config.in: Rebuild.
2126 * sysdep.h: Include <stdlib.h> if it exists.
2127 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2129 * Makefile.in: Rebuild dependencies.
2131 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2133 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2134 Andrew Bray <andy@madhouse.demon.co.uk>.
2136 * mips-opc.c: Add cast when setting mips_opcodes.
2138 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2140 * v850-dis.c (disassemble): Fix sign extension problem.
2141 * v850-opc.c (extract_d*): Fix sign extension problems to make
2142 disassembly calculate branch offsets correctly.
2144 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2146 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2148 * mips-opc.c: Add dctr and dctw.
2150 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2152 * d30v-dis.c (print_insn): Change the way signed constants
2155 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2157 * Makefile.in (BFD_H): New variable.
2158 (HFILES): New variable.
2159 (CFILES): Add all C files.
2160 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2161 Delete old dependencies, and build new ones.
2162 * dep-in.sed: New file.
2164 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2166 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2168 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2170 * mn10200-opc.c: Change "trap" to "syscall".
2171 * mn10300-opc.c: Add new "syscall" instruction.
2173 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2175 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2176 mulul insns on the coldfire.
2178 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2180 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2181 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2182 (print_insn_little_arm): Likewise.
2184 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2186 Based on patches from H.J. Lu <hjl@lucon.org>:
2187 * i386-dis.c (fetch_data): Add prototype.
2188 * m68k-dis.c (fetch_data): Add prototype.
2189 (dummy_print_address): Add prototype. Make static.
2190 * ppc-opc.c (valid_bo): Add prototype.
2191 * sparc-dis.c (build_hash_table): Add prototype.
2192 (is_delayed_branch, compute_arch_mask): Add prototypes.
2193 (print_insn_sparc): Make several local variables const.
2194 (compare_opcodes): Change arguments to const PTR. Add prototype.
2195 * sparc-opc.c (arg): Change name field to be const.
2196 (lookup_name, lookup_value): Add prototypes. Change table and
2197 name parameters to be const.
2198 (sparc_encode_asi): Change name parameter to be const.
2199 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2200 (sparc_encode_sparclet_cpreg): Likewise.
2201 (sparc_decode_asi): Change return type to be const.
2202 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2203 (sparc_decode_sparclet_cpreg): Likewise.
2205 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2207 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2208 Solaris doesn't like the combined options, and the -f is
2210 (stamp-tshlink, install): Likewise.
2212 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2214 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2217 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2219 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2221 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2223 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2226 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2228 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2230 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2232 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2234 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2236 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2238 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2240 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2241 floatformat_to_double to make portable.
2242 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2245 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2247 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2248 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2250 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2252 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2253 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2255 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2257 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2258 (OFF_SL_BR_SCALED): ... to this, and added the flag
2259 TIC80_OPERAND_BASEREL to the flags word.
2260 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2263 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2265 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2266 Change mips_opcodes from const array to a pointer,
2267 and change bfd_mips_num_opcodes from const int to int,
2268 so that we can increase the size of the mips opcodes table
2271 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2273 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2274 store BITNUM values in the table in one's complement form
2275 to match behavior when assembler is given a raw numeric
2276 value for a BITNUM operand.
2277 * tic80-dis.c (print_operand_bitnum): Ditto.
2279 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2281 * d30v-opc.c: Removed references to FLAG_X.
2283 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2285 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2287 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2289 * Makefile.in: Added d30v object files.
2290 * configure: (bfd_d30v_arch) Rebuilt.
2291 * configure.in: (bfd_d30v_arch) Added new case.
2292 * d30v-dis.c: New file.
2293 * d30v-opc.c: New file.
2294 * disassemble.c (disassembler) Add entry for d30v.
2296 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2298 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2299 representations for the floating point BITNUM values.
2301 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2303 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2304 in the table in one's complement form, as they appear in the
2306 (tic80_symbol_to_value): Use macros to access predefined
2308 (tic80_value_to_symbol): Ditto.
2309 (tic80_next_predefined_symbol): New function.
2310 * tic80-dis.c (print_operand_bitnum): Remove code that did
2311 one's complement for BITNUM values.
2313 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2315 * makefile.vms: Remove 8 bit characters. Update to latest
2318 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2320 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2322 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2324 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2325 (IMM24_PCREL): Likewise.
2327 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2330 address for an extended PC relative instruction that is not a
2333 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2335 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2338 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2340 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2341 (tic80_opcodes): Sort entries so that long immediate forms
2342 come after short immediate forms, making it easier for
2343 assembler to select the right one for a given operand.
2345 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2347 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2349 (print_insn_mips16): Likewise.
2351 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2353 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2354 a symbol class that restricts translation to just that
2355 class (general register, condition code, etc).
2357 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2359 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2360 and REG_DEST_E for register operands that have to be
2361 an even numbered register. Add REG_FPA for operands that
2362 are one of the floating point accumulator registers.
2363 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2364 (tic80_opcodes): Change entries that need even numbered
2365 register operands to use the new operand table entries.
2366 Add "or" entries that are identical to "or.tt" entries.
2368 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2370 * mips16-opc.c: Add new cases of exit instruction for
2372 * mips-dis.c (print_mips16_insn_arg): Display floating point
2373 registers in operands of exit instruction. Print `$' before
2374 register names in operands of entry and exit instructions.
2376 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2378 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2379 pairs for all predefined symbols recognized by the assembler.
2380 Also used by the disassembling routines.
2381 (tic80_symbol_to_value): New function.
2382 (tic80_value_to_symbol): New function.
2383 * tic80-dis.c (print_operand_control_register,
2384 print_operand_condition_code, print_operand_bitnum):
2385 Remove private tables and use tic80_value_to_symbol function.
2387 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2389 * d10v-dis.c (print_operand): Change address printing
2390 to correctly handle PC wrapping. Fixes PR11490.
2392 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2394 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2397 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2399 * mips-dis.c (print_insn_mips16): Set insn_info information.
2400 (print_mips16_insn_arg): Likewise.
2402 * mips-dis.c (print_insn_mips16): Better handling of an extend
2403 opcode followed by an instruction which can not be extended.
2405 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2407 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2408 coldfire moveb instruction to not allow an address register as
2409 destination. Although the documentation does not indicate that
2410 this is invalid, experiments uncovered unexpected behavior.
2411 Added a comment explaining the situation. Thanks to Andreas
2412 Schwab for pointing this out to me.
2414 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2416 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2417 entries are presorted so that entries with the same mnemonic are
2418 adjacent to each other in the table. Sort the entries for each
2419 instruction so that this is true.
2421 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2423 * m68k-dis.c: Include <libiberty.h>.
2424 (print_insn_m68k): Sort the opcode table on the most significant
2425 nibble of the opcode.
2427 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2429 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2430 "vsub", "vst", "xnor", and "xor" instructions.
2431 (V_a1): Renamed from V_a, msb of accumulator reg number.
2432 (V_a0): Add macro, lsb of accumulator reg number.
2434 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2436 * tic80-dis.c (print_insn_tic80): Broke excessively long
2437 function up into several smaller ones and arranged for
2438 the instruction printing function to be callable recursively
2439 to print vector instructions that have both a load and a
2440 math instruction packed into a single opcode.
2441 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2442 to explain why it comes after the other vector opcodes.
2444 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2446 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2447 move insns to handle immediate operands.
2449 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2451 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2452 fix operand mask in the "moveml" entries for the coldfire.
2454 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2456 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2457 New macros for building vector instruction opcodes.
2458 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2459 FMT_LI, which were unused. The field is now a flags field.
2460 Remove some opcodes that are possible, but illegal, such
2461 as long immediate instructions with doubles for immediate
2462 values. Add "vadd" and "vld" instructions.
2464 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2466 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2467 the order more logical. Move the shift alias instructions ("rotl",
2468 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2469 interspersed with the regular sr.x and sl.x instructions. Add
2470 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2471 "sub", "subu", "swcr", and "trap".
2473 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2475 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2476 (OFF_SL_PC): Renamed from OFF_SL.
2477 (OFF_SS_BR): New operand type for base relative operand.
2478 (OFF_SL_BR): New operand type for base relative operand.
2479 (REG_BASE): New operand type for base register operand.
2480 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2481 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2482 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2484 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2485 10 char field, padded with spaces on rhs, rather than a string
2486 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2487 than old TIC80_OPERAND_RELATIVE. Add support for new
2488 TIC80_OPERAND_BASEREL flag bit.
2490 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2492 * tic80-dis.c (print_insn_tic80): Print floating point operands
2494 * tic80-opc.c (SPFI): Add single precision floating point
2495 immediate operand type.
2496 (ROTATE): Add rotate operand type for shifts.
2497 (ENDMASK): Add for shifts.
2498 (n): Macro for the 'n' bit.
2499 (i): Macro for the 'i' bit.
2500 (PD): Macro for the 'PD' field.
2501 (P2): Macro for the 'P2' field.
2502 (P1): Macro for the 'P1' field.
2503 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2506 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2508 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2509 adding in current address for pc-relative operands.
2511 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2513 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2514 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2515 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2516 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2517 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2518 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2519 (REG_SCALED, LSI_SCALED): New operand types.
2520 (E): New macro for 'E' bit at bit 27.
2521 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2522 opcodes, including the various size flavors (b,h,w,d) for
2523 the direct load and store instructions.
2525 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2527 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2529 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2530 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2531 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2532 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2533 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2534 masks with "MASK_* & ~M_*" to get the M bit reset.
2535 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2537 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2540 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2541 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2543 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2544 CC, SICR, and LICR table entries.
2545 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2546 "bcnd", and "brcr" opcodes.
2548 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2550 * ppc-opc.c (powerpc_operands): Make comment match the
2551 actual fields (no shift field).
2552 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2553 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2554 partial implementation, work in progress.
2555 * tic80-opc.c (tic80_operands): Begin construction operands table.
2556 (tic80_opcodes): Continue populating opcodes table and start
2557 filling in the operand indices.
2558 (tic80_num_opcodes): Add this.
2560 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2562 * m68k-opc.c: Add #B case for moveq.
2564 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2566 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2567 before they are used.
2569 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2571 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2572 for "breakpoint" instruction.
2574 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2576 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2577 (dep): Use ALL_CFLAGS rather than CFLAGS.
2579 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2581 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2584 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2586 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2587 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2589 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2591 * mips16-opc.c: Add "abs".
2593 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2595 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2596 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2597 (disassembler): Add bfd_arch_tic80 support to set disassemble
2598 to print_insn_tic80.
2599 * tic80-dis.c (print_insn_tic80): Add stub.
2601 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2603 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2604 * configure: Regenerate with autoconf.
2605 * tic80-dis.c: Add file.
2606 * tic80-opc.c: Add file.
2608 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2610 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2612 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2614 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2615 (mn10200_opcodes): Use it for some logicals and btst insns.
2616 Add "break" and "trap" instructions.
2618 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2620 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2622 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2624 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2625 relative load or add now depends upon whether the instruction is
2628 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2630 * mn10200-dis.c: Finish writing disassembler.
2631 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2632 Fix mask for "jmp (an)".
2634 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2635 handle endianness issues for mn10300.
2637 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2639 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2641 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2642 instruction. Fix opcode field for "movb (imm24),dn".
2644 * mn10200-opc.c (mn10200_operands): Fix insertion position
2647 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10200-opc.c: Create mn10200 opcode table.
2650 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2651 but moving along nicely.
2653 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2655 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2657 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2659 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2660 specifiers for fmovem* instructions.
2662 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2664 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2666 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2668 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2671 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2673 * mn10300-opc.c: Add some comments explaining the various
2676 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2678 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2680 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2683 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2684 operand specifiers in fmovm* instructions.
2686 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2688 * ppc-opc.c (insert_li): Give an error if the offset has the two
2689 least significant bits set.
2691 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2693 * mips-dis.c (print_insn_mips16): Separate the instruction from
2694 the arguments with a tab, not a space.
2696 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2698 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2701 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2704 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2706 * configure: Rebuild with autoconf 2.12.
2708 Add support for mips16 (16 bit MIPS implementation):
2709 * mips16-opc.c: New file.
2710 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2711 (mips16_reg_names): New static array.
2712 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2713 after seeing a 16 bit symbol.
2714 (print_insn_little_mips): Likewise.
2715 (print_insn_mips16): New static function.
2716 (print_mips16_insn_arg): New static function.
2717 * mips-opc.c: Add jalx instruction.
2718 * Makefile.in (mips16-opc.o): New target.
2719 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2720 * configure: Rebuild.
2722 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2724 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2725 operand specifiers in *save, *restore and movem* instructions.
2727 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2730 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2731 register operands for immediate arithmetic, not, neg, negx, and
2732 set according to condition instructions.
2734 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2735 specifier of the effective-address operand in immediate forms of
2736 arithmetic instructions. The specifier for the immediate operand
2737 notes how and where the constant will be stored.
2739 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2744 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2747 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2749 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10300-dis.c (disassemble): Handle register lists.
2753 * mn10300-opc.c: Fix handling of register list operand for
2754 "call", "ret", and "rets" instructions.
2756 * mn10300-dis.c (disassemble): Print PC-relative and memory
2757 addresses symbolically if possible.
2758 * mn10300-opc.c: Distinguish between absolute memory addresses,
2759 pc-relative offsets & random immediates.
2761 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2763 (disassemble): Handle SPLIT and EXTENDED operands.
2765 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2767 * mn10300-dis.c: Rough cut at printing some operands.
2769 * mn10300-dis.c: Start working on disassembler support.
2770 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2772 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2774 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2776 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2778 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2780 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2782 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2783 register argument is calls and jmp instructions.
2785 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2787 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2788 getx operand. Fix opcode for mulqu imm,dn.
2790 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2792 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2793 in MN10300_OPERAND_SPLIT operands for how many bits
2794 appear in the basic insn word. Add IMM32_HIGH24,
2795 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2796 (mn10300_opcodes): Use new operands as needed.
2798 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2799 for bset, bclr, btst instructions.
2800 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2802 * mn10300-opc.c (mn10300_operands): Remove many redundant
2803 operands. Update opcode table as appropriate.
2804 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2805 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2807 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2809 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2810 operands (for indexed load/stores). Fix bitpos for DI
2811 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2812 few instructions that insert immediates/displacements in the
2813 middle of the instruction. Add IMM8E for 8 bit immediate in
2814 the extended part of an instruction.
2815 (mn10300_operands): Use new opcodes as appropriate.
2817 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2819 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2820 sequential so the assembler never parallelizes it with
2823 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2825 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2826 a data/address register that appears in register field 0
2827 and register field 1.
2828 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2830 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2832 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2833 standard disassembly.
2835 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2836 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2837 Recategorize PALcode instructions.
2839 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2841 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2843 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2845 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2846 there are no operand types.
2848 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2850 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2852 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2854 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2858 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2860 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2861 and sst.w instructions.
2863 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2866 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2868 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2871 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2873 * ppc-opc.c (PPCPWR2): Define.
2874 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2877 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2879 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2880 field for movhu instruction.
2882 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2883 cast value to "long" not "signed long" to keep hpux10
2886 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2888 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2891 * mn10300-opc.c (FMT*): Remove definitions.
2893 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2894 for shift-by-register opcodes.
2896 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2897 into [AD][MN][01] for encoding the position of the register
2900 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2902 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2903 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2905 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2907 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2908 Fix various typos. Add "PAREN" operand.
2909 (MEM, MEM2): Define.
2910 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2911 operands. Fix several typos.
2913 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2916 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2918 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2919 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2921 (mn10300_opcodes): Break opcode format out into its own field.
2922 Update many operand fields to deal with signed vs unsigned
2923 issues. Fix one or two typos in the "mov" instruction
2924 opcode, mask and/or operand fields.
2926 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2928 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2929 m68851 wasn't reset.
2931 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2933 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2934 all opcodes. Very rough cut at operands for all opcodes.
2936 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2939 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2941 * mn10200-opc.c, mn10300-opc.c: New files.
2942 * mn10200-dis.c, mn10300-dis.c: New files.
2943 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2944 * disassemble.c: Break mn10x00 support into 10200 and 10300
2946 * configure.in: Likewise.
2947 * configure: Rebuilt.
2949 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2951 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2953 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2955 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2957 * disassemble (ARCH_mn10x00): Define.
2958 (disassembler): Handle bfd_arch_mn10x00.
2959 * configure.in: Recognize bfd_mn10x00_arch.
2960 * configure: Rebuilt.
2962 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2964 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2965 accordingly. Don't declare functions using op_rtn.
2967 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2969 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2970 params to be more standard.
2971 * (disassemble): Print absolute addresses and symbolic names for
2972 branch and jump targets.
2973 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2975 * (v850_opcodes): Add breakpoint insn.
2977 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2979 * m68k-opc.c: Move the fmovemx data register cases before the
2980 other cases, so that they get recognized before the data register
2981 does gets treated as a degenerate register list.
2983 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2985 * mips-opc.c: Add a case for "div" and "divu" with two registers
2986 and a destination of $0.
2988 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2990 * mips-dis.c (print_insn_arg): Add prototype.
2991 (_print_insn_mips): Ditto.
2993 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2995 * mips-dis.c (print_insn_arg): Print condition code registers as
2998 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3000 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3002 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3004 * v850-dis.c (disassemble): Make static. Provide prototype.
3006 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3008 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3011 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3013 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3014 ']' characters into the output stream.
3015 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3016 Add "memop" field to all opcodes (for the disassembler).
3017 Reorder opcodes so that "nop" comes before "mov" and "jr"
3018 comes before "jarl".
3020 * v850-dis.c (print_insn_v850): Fix typo in last change.
3022 * v850-dis.c (print_insn_v850): Properly handle disassembling
3023 a two byte insn at the end of a memory region when the memory
3024 region's size is only two byte aligned.
3026 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3028 * v850-dis.c (v850_reg_names): Define.
3029 (v850_sreg_names, v850_cc_names): Likewise.
3030 (disassemble): Very rough cut at printing operands (unformatted).
3032 * v850-opc.c (BOP_MASK): Fix.
3033 (v850_opcodes): Fix mask for jarl and jr.
3035 * v850-dis.c: New file. Skeleton for disassembler support.
3036 * Makefile.in Remove v850 references, they're not needed here.
3037 * configure.in: Add v850-dis.o when building v850 toolchains.
3038 * configure: Rebuilt.
3039 * disassemble.c (disassembler): Call v850 disassembler.
3041 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3042 (insert_d8_6, extract_d8_6): New functions.
3043 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3044 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3046 (IF4A, IF4B): Use "D7" instead of "D7S".
3047 (IF4C, IF4D): Use "D8_7" instead of "D8".
3048 (IF4E, IF4F): New. Use "D8_6".
3049 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3050 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3052 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3053 (v850_operands): Change D16 to D16_15, use special insert/extract
3054 routines. New new D16 that uses the generic insert/extract code.
3055 (IF7A, IF7B): Use D16_15.
3056 (IF7C, IF7D): New. Use D16.
3057 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3059 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3060 message. Issue an error if the branch offset is odd.
3062 * v850-opc.c: Add notes about needing special insert/extract
3063 for all the load/store insns, except "ld.b" and "st.b".
3065 * v850-opc.c (insert_d22, extract_d22): New functions.
3066 (v850_operands): Use insert_d22 and extract_d22 for
3068 (insert_d9): Fix range check.
3070 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3072 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3073 and set bits field to D9 and D22 operands.
3075 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3077 * v850-opc.c (v850_operands): Define SR2 operand.
3078 (v850_opcodes): "ldsr" uses R1,SR2.
3080 * v850-opc.c (v850_opcodes): Fix opcode specs for
3081 sld.w, sst.b, sst.h, sst.w, and nop.
3083 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3085 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3086 end of the opcode table.
3088 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3090 * d10v-opc.c (pre_defined_registers): Added register pairs,
3091 "r0-r1", "r2-r3", etc.
3093 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3095 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3096 Create I16U for an unsigned 16bit mmediate operand.
3097 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3099 * v850-opc.c (v850_operands): Define EP operand.
3100 (IF4A, IF4B, IF4C, IF4D): Use EP.
3102 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3103 with immediate operand, "movhi". Tweak "ldsr".
3105 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3106 correct. Get sld.[bhw] and sst.[bhw] closer.
3108 * v850-opc.c (v850_operands): "not" is a two byte insn
3110 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3112 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3114 * v850-opc.c (two): Get order of words correct.
3116 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3118 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3119 register source and destination operands.
3120 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3122 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3123 same thinko in "trap" opcode.
3125 * v850-opc.c (v850_opcodes): Add initializer for size field
3128 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3129 Add D8 for 8-bit unsigned field in short load/store insns.
3130 (IF4A, IF4D): These both need two registers.
3131 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3132 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3133 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3134 for "ldsr" and "stsr".
3135 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3138 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3139 short store word (sst.w).
3141 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3143 * v850-opc.c (v850_operands): Added insert and extract fields,
3144 pointers to functions that handle unusual operand encodings.
3146 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3148 * v850-opc.c (v850_opcodes): Enable "trap".
3150 * v850-opc.c (v850_opcodes): Fix order of displacement
3151 and register for "set1", "clr1", "not1", and "tst1".
3153 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3155 * v850-opc.c (v850_operands): Add "B3" support.
3156 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3159 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3161 * v850-opc.c: Close unterminated comment.
3163 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3165 * v850-opc.c (v850_operands): Add flags field.
3166 (v850_opcodes): add move opcodes.
3168 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3170 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3171 * configure: (bfd_v850v_arch) Add new case.
3172 * configure.in: (bfd_v850_arch) Add new case.
3173 * v850-opc.c: New file.
3175 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3177 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3179 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3181 * d10v-opc.c: Add additional information to the opcode
3182 table to help determinine which instructions can be done
3185 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3187 * mpw-make.sed: Update editing of include pathnames to be
3190 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3192 * arm-opc.h: Added "bx" instruction definition.
3194 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3196 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3198 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3200 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3202 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3204 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3206 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3208 * makefile.vms: Update for alpha-opc changes.
3210 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3212 * i386-dis.c (print_insn_i386): Actually return the correct value.
3213 (ONE, OP_ONE): #ifdef out; not used.
3215 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3217 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3218 Changed subi operand type to treat 0 as 16.
3220 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3222 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3225 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3227 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3228 memory transfer instructions. Add new format string entries %h and %s.
3229 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3232 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3234 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3235 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3237 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3239 * alpha-dis.c (print_insn_alpha_osf): Remove.
3240 (print_insn_alpha_vms): Remove.
3241 (print_insn_alpha): Make globally visible. Chose the register
3242 names based on info->flavour.
3243 * disassemble.c: Always return print_insn_alpha for the alpha.
3245 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3247 * d10v-dis.c (dis_long): Handle unknown opcodes.
3249 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3251 * d10v-opc.c: Changes to support signed and unsigned numbers.
3252 All instructions with the same name that have long and short forms
3253 now end in ".l" or ".s". Divs added.
3254 * d10v-dis.c: Changes to support signed and unsigned numbers.
3256 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3258 * d10v-dis.c: Change all functions to use info->print_address_func.
3260 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3262 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3263 move ccr/sr insns more strict so that the disassembler only
3264 selects them when the addressing mode is data register.
3266 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3267 * d10v-opc.c (pre_defined_registers): Declare.
3268 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3269 to pick a better name for the registers.
3271 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3273 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3274 operands for fexpand and fpmerge. From Christian Kuehnke
3275 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3277 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3279 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3280 print routine. Take new regnames and cpumask arguments.
3281 Kill the environment variable nonsense.
3282 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3283 (print_insn_alpha_vms): New function. Do VMS style regnames.
3284 * disassemble.c (disassembler): Test bfd flavour to pick
3285 between OSF and VMS routines. Default to OSF.
3287 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3289 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3290 * configure: Rebuild.
3291 * Makefile.in (install): Use @INSTALL_SHLIB@.
3293 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3295 * configure: (bfd_d10v_arch) Add new case.
3296 * configure.in: (bfd_d10v_arch) Add new case.
3297 * d10v-dis.c: New file.
3298 * d10v-opc.c: New file.
3299 * disassemble.c (disassembler) Add entry for d10v.
3301 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3303 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3304 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3306 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3308 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3309 distinguish between variants of the instruction set.
3310 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3311 distinguish between variants of the instruction set.
3313 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3315 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3316 the 8086 instruction set.
3317 * i386-dis.c: General cleanups. Make most things static. Add
3318 prototypes. Get rid of static variables aflags and dflags. Pass
3319 them as args (to almost everything).
3321 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3323 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3325 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3327 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3328 if the next arg is marked with SRC_IN_DST. Gross.
3330 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3331 we're looking for and find EXR.
3333 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3334 if we're looking for KBIT and we don't find it.
3336 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3339 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3340 3bit immediate operands.
3342 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3344 * Released binutils 2.7.
3346 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3347 <kkaempf@progis.ac-net.de>.
3349 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3351 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3353 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3355 * sparc-dis.c (print_insn_sparclite): New routine to print
3356 sparclite instructions.
3358 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3360 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3362 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3364 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3365 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3366 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3368 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3370 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3371 Use autoconf-set values.
3372 (docdir, oldincludedir): Removed.
3373 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3375 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3377 * alpha-opc.c: New file.
3378 * alpha-opc.h: Remove.
3379 * alpha-dis.c: Complete rewrite to use new opcode table.
3380 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3381 * configure: Rebuild with autoconf 2.10.
3382 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3383 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3385 (alpha-opc.o): New target.
3387 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3389 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3390 Set imm_added_to_rs1 even if the source and destination register
3393 * sparc-opc.c: Add some two operand forms of the wr instruction.
3395 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3397 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3400 * disassemble.c (disassembler): Handle H8/S.
3401 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3403 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3405 * sparc-opc.c: Add beq/teq as aliases for be/te.
3407 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3408 <sergei@msil.sps.mot.com>.
3410 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3412 * makefile.vms: New file.
3414 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3416 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3418 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3421 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3423 * i386-dis.c (OP_OFF): Call append_prefix.
3425 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3427 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3428 unsigned long to silence a warning from the Solaris PowerPC
3431 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3433 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3435 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3437 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3439 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3440 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3441 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3442 cpush, cpusha, cpull sparclet insns.
3444 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3446 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3448 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3450 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3451 Set F_FLOAT on other floating point instructions.
3453 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3455 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3457 (powerpc_opcodes): Add 860/821 specific SPRs.
3459 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * configure.in: Permit --enable-shared to specify a list of
3462 directories. Set and substitute BFD_PICLIST.
3463 * configure: Rebuild.
3464 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3465 uses. Set to @BFD_PICLIST@.
3467 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3469 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3470 not "abs", which may be needed for the absolute in something
3471 like btst #0,@10:8. Print L_3 immediates separately from other
3472 immediates. Change ABSMOV reference to ABS8MEM.
3474 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3476 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3477 (current_arch_mask): New static global.
3478 (compute_arch_mask): New static function.
3479 (print_insn_sparc): Delete sparc_v9_p. New static local
3480 current_mach. Resort opcode table if current_mach changes.
3481 Generalize "insn not supported" test.
3482 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3483 Delete test for v9/!v9.
3484 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3486 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3487 (brfcx): Renamed to FBRX.
3488 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3489 coprocessor mnemonics are not supported on the sparclet).
3490 (condf): Renamed to CONDF.
3491 (SLCBCC2): Delete F_ALIAS flag.
3493 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3495 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3496 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3498 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3501 that the shared library version number is set correctly.
3503 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3505 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3506 Miles Bader <miles@gnu.ai.mit.edu>.
3507 * configure: Rebuild.
3509 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3511 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3514 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * configure: Rebuild with autoconf 2.8.
3518 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3520 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3521 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3523 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3526 since they appear as targets in Makefile.in.
3527 * configure: Rebuild.
3529 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3531 * mpw-make.sed: Edit out shared library support bits.
3533 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3535 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3536 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3537 (sparc_opcodes): Add sparclet insns.
3538 (sparclet_cpreg_table): New static local.
3539 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3540 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3542 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3544 * i386-dis.c (index16): New static variable.
3545 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3547 (OP_indirE): Return result of OP_E.
3548 (OP_E): Check for 16 bit addressing mode, and disassemble
3549 correctly. Optimised 32 bit case a little. Don't print
3550 "(base,index,scale)" when sib specifies only an offset.
3552 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3554 * configure.in: Set and substitute SHLIB_DEP.
3555 * configure: Rebuild.
3556 * Makefile.in (SHLIB_DEP): New variable.
3557 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3558 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3559 COMMON_SHLIB, add them to piclist with appropriate modifications.
3560 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3561 here: just use piclist.
3563 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3565 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3566 (print_insn_sparc): Rewrite v9/not-v9 tests.
3567 (compare_opcodes): Likewise.
3568 * sparc-opc.c (MASK_<ARCH>): Define.
3569 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3570 (sparclet,v6notv9): Define.
3571 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3572 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3574 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * configure.in: Call AC_PROG_CC before configure.host.
3577 * configure: Rebuild.
3579 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3581 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3583 * i386-dis.c (onebyte_has_modrm): New static array.
3584 (twobyte_has_modrm): New static array.
3585 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3587 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3589 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3592 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3594 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3597 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3599 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3600 m68010up, not just m68020up | cpu32.
3602 * Makefile.in (SONAME): New variable.
3603 ($(SHLINK)): Make a link to the transformed name, as well.
3604 (stamp-tshlink): New target.
3605 (install): Skip stamp-tshlink during install.
3607 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3609 * configure.in: Call AC_ARG_PROGRAM.
3610 * configure: Rebuild.
3611 * Makefile.in (program_transform_name): New variable.
3612 (install): Transform library name before installing it.
3614 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3616 * i960-dis.c (mem): Add HX dcinva instruction.
3618 Support for building as a shared library, based on patches from
3619 Alan Modra <alan@spri.levels.unisa.edu.au>:
3620 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3621 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3622 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3623 * configure: Rebuild.
3624 * Makefile.in (ALLLIBS): New variable.
3625 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3626 (COMMON_SHLIB, SHLINK): New variables.
3627 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3628 (STAGESTUFF): Remove variable.
3629 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3630 (stamp-piclist, piclist): New targets.
3631 ($(SHLIB), $(SHLINK)): New targets.
3632 ($(OFILES)): Depend upon stamp-picdir.
3633 (disassemble.o): Build twice if PICFLAG is set.
3634 (MOSTLYCLEAN): Add pic/*.o.
3635 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3636 (distclean): Remove pic and stamp-picdir.
3637 (install): Install shared libraries.
3638 (stamp-picdir): New target.
3640 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3642 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3643 Print unknown instruction as "unknown", rather than in hex.
3645 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3647 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3649 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3651 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3653 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3655 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3656 when necessary. From Ulrich Drepper
3657 <drepper@myware.rz.uni-karlsruhe.de>.
3659 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3661 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3662 sparc_num_opcodes. Update architecture enum values.
3663 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3664 (sparc_opcode_lookup_arch): New function.
3665 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3666 (sparc_opcodes): Add v9a shutdown insn.
3668 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3670 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3671 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3673 (print_insn_sparc64): Deleted.
3674 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3677 * sparc-opc.c (architecture_pname): Add v9a.
3679 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3681 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3682 incorrectly defined as 0x16 when it should be 0x15.
3683 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3684 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3685 excb (exception barrier) which is defined in the Alpha
3686 Architecture Handbook version 2.
3687 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3688 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3689 disassembled as or, for example.
3691 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3693 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3694 (_print_insn_mips): Change i from int to unsigned int.
3696 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3698 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3699 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3701 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3703 * i386-dis.c: Added Pentium Pro instructions.
3705 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3707 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3710 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3712 * sh-opc.h (sh_nibble_type): Added REG_B.
3713 (sh_arg_type): Added A_REG_B.
3714 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3716 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3718 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3720 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3722 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3724 * Makefile.in (distclean): Remove stamp-h. From Ronald
3725 F. Guilmette <rfg@monkeys.com>.
3727 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3729 From David Mosberger-Tang <davidm@azstarnet.com>:
3730 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3733 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3735 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3736 (sh_table): Added many SH3 opcodes.
3737 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3739 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3741 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3742 (subco,subco.): Mark this PPC, not PPCCOM.
3744 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3746 * configure: Rebuild with autoconf 2.7.
3748 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3750 * configure: Rebuild with autoconf 2.6.
3752 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3754 * configure.in: Sort list of architectures. Accept but do nothing
3755 for alliant, convex, pyramid, romp, and tahoe.
3757 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3759 * a29k-dis.c (print_special): Change num to unsigned int.
3761 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3763 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3766 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3768 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3769 * configure: Rebuilt.
3771 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3773 * configure.in: Add case for bfd_i860_arch.
3774 * configure: Rebuild.
3776 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3778 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3779 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3780 (NEXTDOUBLE): Likewise.
3781 (print_insn_m68k): Don't match fmoveml if there is more than one
3782 register in the list.
3783 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3785 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3787 * m68k-opc.c: Use #W rather than #w.
3788 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3790 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3792 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3793 and likewise for all the dbxx opcodes.
3795 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3797 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3799 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3801 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3802 the VR4100 specific instructions to the mips_opcodes structure.
3804 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3806 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3807 ugly Metrowerks bug in CW6, is fixed in CW7.
3809 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3811 * ppc-opc.c (whole file): Add flags for common/any support.
3813 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3815 * Makefile.in (BISON): Remove macro.
3816 (FLAGS_TO_PASS): Remove BISON.
3818 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3820 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3822 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3823 instructions that take no args by looking at the match mask.
3824 (print_insn_arg): Always print "%" before register names.
3825 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3826 [case '_']: Don't print "@#" before address.
3827 [case 'J']: Use "%s" as format string, not register name.
3828 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3830 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3832 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3835 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3837 From David Mosberger-Tang <davidm@azstarnet.com>
3839 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3840 (alpha_insn_set): added definitions for VAX floating point
3841 instructions (Unix compilers don't generate these, but handcoded
3842 assembly might still use them).
3844 * alpha-dis.c (print_insn_alpha): added support for disassembling
3845 the miscellaneous instructions in the Alpha instruction set.
3847 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3849 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3850 no longer create sysdep.h, sed ppc-opc.c to work around a
3851 serious Metrowerks C bug.
3852 * mpw-make.in: Remove.
3853 * mpw-make.sed: New file, used by mpw-configure to edit
3854 Makefile.in into an MPW makefile.
3856 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3858 * Makefile.in (maintainer-clean): New synonym for realclean.
3860 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3862 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3863 which use '0', '1', and '2' instead. Specify the proper size for
3864 a pmove immediate operand. Correct the pmovefd patterns to be
3865 moves to a register, not from a register.
3866 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3868 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3870 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3871 %psr, %wim, %tbr as F_NOTV9.
3873 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3875 * Makefile.in (Makefile): Just rebuild Makefile when running
3877 (config.h, stamp-h): New targets.
3878 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3879 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3880 rebuilding config.h.
3881 * configure: Rebuild.
3883 * mips-opc.c: Change unaligned loads and stores with "t,A"
3884 operands to use "t,A(b)".
3886 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3888 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3890 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3892 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3893 until 3 instead of until 2.
3895 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3897 * Makefile.in (ALL_CFLAGS): Define.
3898 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3899 (MOSTLYCLEAN): Add config.log.
3900 (distclean): Don't remove config.log.
3901 * configure.in: Substitute HDEFINES.
3902 * configure: Rebuild.
3904 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3906 * sh-opc.h (sh_arg_type): Add F_FR0.
3907 (sh_table, case fmac): Add F_FR0 as first argument.
3909 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3911 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3913 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3915 * sparc-dis.c: Remove all references to NO_V9.
3917 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3919 * aclocal.m4: Just include ../bfd/aclocal.m4.
3920 * configure: Rebuild.
3922 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3924 * sparc-dis.c (X_DISP19): Define.
3925 (print_insn, case 'G'): Use it.
3926 (print_insn, case 'L'): Sign extend displacement.
3928 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3930 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3931 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3932 host_makefile_frag or frags.
3933 * aclocal.m4: New file.
3934 * configure: Rebuild.
3935 * Makefile.in (INSTALL): Set to @INSTALL@.
3936 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3937 (INSTALL_DATA): Set to @INSTALL_DATA@.
3939 (AR_FLAGS): Set to rc rather than qc.
3940 (CC): Define as @CC@.
3941 (CFLAGS): Set to @CFLAGS@.
3942 (@host_makefile_frag@): Remove.
3943 (config.status): Remove dependency upon @frags@.
3945 * configure.in: ../bfd/config.bfd now just sets shell variables.
3946 Use them rather than looking through target Makefile fragments.
3947 * configure: Rebuild.
3949 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3951 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3953 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3955 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3956 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3959 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3960 (lookup_{name,value}): New functions.
3961 (prefetch_table): New static local.
3962 (sparc_{encode,decode}_prefetch): New functions.
3963 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3965 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3967 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3970 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3972 * sh-dis.c: Correct comment on first line of file.
3974 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3976 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3978 * sparc-opc.c (asi, membar): New static locals.
3979 (sparc_{encode,decode}_{asi,membar}): New functions.
3980 (sparc_opcodes, membar insn): Fix.
3981 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3982 Support decoding of membar masks.
3985 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3987 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3989 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3992 and likewise for the other branches. Add bhs as an alias for bcc,
3993 and likewise for the size variants. Add dbhs as an alias for
3996 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3998 * sh-opc.h (FP sts instructions): Update to match reality.
4000 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * m68k-dis.c: (fpcr_names): Add % before all register names.
4003 (reg_names): Likewise.
4004 (print_insn_arg): Don't explicitly print % before register names.
4005 Add % before register names in static array names. In case 'r',
4006 print data registers as `@(Dn)', not `Dn@'. When printing a
4007 memory address, don't print @# before it.
4008 (print_indexed): Change base_disp and outer_disp from int to
4009 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4010 syntax. Sign extend 8 byte displacement correctly.
4011 (print_base): Print using MIT syntax. Print zpc when appropriate.
4012 Change parameter disp from int to bfd_vma.
4014 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4017 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4019 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4020 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4021 * sh-opc.h (sh_arg_type): Add new operand types.
4022 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4024 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4026 * Makefile.in (distclean): Remove generated file config.h.
4028 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4030 * Makefile.in (distclean): Remove generated file config.h.
4032 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4034 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4036 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4038 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4039 rather than numopcodes. Use m68k_opcodes rather than removed
4040 opcode function. Don't check F_ALIAS.
4041 (print_insn_arg): Change first parameter to be const char *.
4042 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4043 (m68k-opc.o): New target.
4044 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4045 * configure: Rebuild.
4047 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4049 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4050 (opcode_bits, opcode_hash_table): New variables.
4051 (opcodes_initialized): Renamed from opcodes_sorted.
4052 (build_hash_table): New function.
4053 (is_delayed_branch): Use hash table.
4054 (print_insn): Renamed from print_insn_sparc, made static.
4055 Build and use hash table. If !sparc64, ignore sparc64 insns,
4056 and vice-versa if sparc64.
4057 (print_insn_sparc, print_insn_sparc64): New functions.
4058 (compare_opcodes): Move sparc64 opcodes to end.
4059 Print commutative insns with constant second.
4060 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4062 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4064 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4065 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4066 avoids printing a delay slot in a delay slot.
4067 * sh-opc.h (sh_table): Fully bracket last entry.
4069 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4071 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4073 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4075 * configure.in: Get host_makefile_frag from ${srcdir}.
4077 * configure.in: Autoconfiscated. Check for string[s].h. Create
4078 config.h from config.in. Don't set up sysdep.h link.
4079 * sysdep.h: New file.
4080 * configure, config.in: New files, generated from configure.in.
4081 * Makefile.in: Updated to be processed autoconf-style.
4082 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4083 (Makefile): Depend on config.status.
4084 (config.status): New rule.
4085 * configure.bat: Update Makefile substitutions.
4087 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4089 * mips-opc.c (L1): Define.
4090 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4091 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4094 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4096 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4097 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4098 have multiple add units but only a single logical unit.
4100 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4101 shifted by 18, without any insertion or extraction function.
4102 (insert_cr, extract_cr): Remove.
4104 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4106 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4109 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4111 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4112 * sh-opc.h: Add copyright.
4114 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4116 * Makefile.in (crunch-m68k): Delete extra target accidentally
4117 checked in a while ago.
4119 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4121 * sh-opc.h (sh_table): Add SH3 support.
4123 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4125 * sh-opc.h: Added bsrf and braf.
4127 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4129 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4130 bogus [ls]fm{ea,fd} patterns.
4132 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4133 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4134 initialize it from memory. Make function static.
4135 (print_insn_{big,little}_arm): New functions.
4136 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4137 the correct endianness.
4139 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4141 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4144 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4146 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4147 17th, so that it builds again using GCC as the compiler.
4149 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4151 * mips-dis.c (print_insn_little_mips): Cast return value from
4152 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4153 expects an unsigned long, and that might be fewer words of
4154 argument storage (e.g., if bfd_vma is long long on a 32-bit
4156 (print_insn_big_mips): Likewise with bfd_getb32 value.
4157 (_print_insn_mips): Now static.
4159 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4161 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4162 gcc memory hog problem with initializer is fixed.
4164 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4166 Merge in support for Mac MPW as a host.
4167 (Old change descriptions retained for informational value.)
4169 * mpw-config.in (archname): Compute from the config.
4170 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4172 * mpw-config.in (target_arch): Compute from canonical target.
4173 (m68k, mips, powerpc, sparc): Add architectures.
4174 * mpw-make.in (disassemble.c.o): Add.
4175 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4177 * mpw-config.in (BFD_MACHINES): Set to a default value.
4178 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4180 * mpw-make.in (CSEARCH): Add extra-include to search path.
4182 * mpw-config.in (varargs.h): Don't create.
4183 (sysdep.h): Create using forward-include.
4184 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4186 * mpw-config.in: New file, MPW version of configure.in.
4187 * mpw-make.in: New file, MPW version of Makefile.in.
4189 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4191 * alpha-dis.c (print_insn_alpha): Put empty statement after
4194 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4196 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4197 (low_sign_extend): Likewise.
4198 (get_field): Delete unused function.
4199 (set_field, deposit_14, deposit_21): Likewise.
4201 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4203 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4206 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4208 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4210 * alpha-opc.h (OSF_ASMCODE): define
4211 print pal-code names as defined in App C of the
4212 Alpha Architecture Reference Manual
4214 * alpha-dis.c: cleaned up output
4215 print stylized code forms as defined in App A.4.3 of the
4216 Alpha Architecture Reference Manual
4218 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4220 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4222 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4225 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4227 * m68k-dis.c (opcode): New function. Returns address of opcode
4228 table entry given index, even if the opcode table was split to
4229 work around gcc bugs.
4230 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4232 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4233 (reg_names): Now const.
4234 (print_insn_arg): Arrays cacheFieldName and names now const.
4235 (print_indexed): Array scales now const.
4237 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4239 * ppc-opc.c: Sort recently added instructions by minor opcode
4240 number within major opcode number.
4242 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4244 * hppa-dis.c: Include libhppa.h.
4246 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * mips-opc.c: Change dli to use M_DLI, and add dla.
4250 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4252 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4254 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4256 * mips-opc.c: Add r4650 mul instruction.
4258 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4260 * mips-opc.c: Add uld and usd macros for unaligned double load and
4263 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4265 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4266 mfdcr, mtdcr, icbt, iccci.
4268 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4270 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4271 signed char fields to shorts, more portable.
4273 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4275 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4276 char fields as signed chars, since they may have negative values.
4278 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4280 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4281 (mycroft@netbsd.org).
4283 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4285 From "Logg, Ed" <elogg@ea.com>:
4286 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4287 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4290 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4292 * ppc-opc.c: Changes based on patch from David Edelsohn
4293 <edelsohn@mhpcc.edu>.
4294 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4297 (insert_tbr): New static function.
4298 (extract_tbr): New static function.
4299 (XFXFXM_MASK, XFXM): Define.
4300 (XSPRBAT_MASK, XSPRG_MASK): Define.
4301 (powerpc_opcodes): Add instructions to access special registers by
4302 name. Add mtcr and mftbu.
4304 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4306 * mips-opc.c (P3): Define.
4307 (mips_opcodes): Add mad and madu.
4309 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4311 * configure.in: Add W65 support.
4312 * disassemble.c: Likewise.
4313 * w65-opc.h, w65-dis.c: New files.
4315 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4317 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4320 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4322 * mips-opc.c: Add dli as a synonym for li.
4324 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4326 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4327 print something for reserved opcode values, even if it won't
4330 * mips-dis.c (_print_insn_mips): When initializing, shift right
4331 and mask, to avoid sign extension problems on the Alpha.
4333 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4336 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4338 * sh-opc.h (mov.l gbr): Get direction right.
4339 * sh-dis.c (print_insn_shx): New function.
4340 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4341 print opcodes with right byte order.
4343 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4345 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4346 to avoid conflicts with getopt.
4348 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4350 * hppa-dis.c (print_insn_hppa): Read the instruction using
4351 bfd_getb32, so that it works on a little endian or 64 bit host.
4352 Remove unused local variable op.
4354 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4356 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4357 addu does not work correctly if -mips3.
4359 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4361 * a29k-dis.c (print_special): Add special register names defined
4362 on 29030, 29040 and 29050.
4363 (print_insn): Handle new operand type 'I'.
4365 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4367 * Makefile.in (INSTALL): Use top level install.sh script.
4369 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4371 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4372 that it works on a little endian host.
4374 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4376 * configure.in: Use ${config_shell} when running config.bfd.
4378 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4380 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4382 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4384 * a29k-dis.c (print_insn): Print the opcode.
4386 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4388 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4390 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4392 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4394 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4396 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4397 which store a value into memory.
4399 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4401 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4402 * arm-dis.c, arm-opc.h: New files.
4404 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4406 * Makefile.in (ns32k-dis.o): Add dependency.
4407 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4408 string, not as array of chars.
4410 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4412 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4414 * sparc-opc.c: Added sparclite extended FP operations, and
4415 versions of v9 impdep* instructions permitting specification of
4418 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4420 * i960-dis.c (reg_names): Now const.
4421 (struct sparse_tabent): New type, copied from array type in mem
4423 (ctrl): Local static array ctrl_tab now const.
4424 (cobr): Local static array cobr_tab now const.
4425 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4426 static variable mem_tab no longer explicitly initialized. Changed
4427 mem_init to const array of struct sparse_tabent.
4428 (reg): Local static variable reg_tab no longer explicitly
4429 initialized. Changed reg_init to const array of struct
4431 (ea): Local static array scale_tab now const.
4433 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4436 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4438 * configure.bat: the disassember needs to be enabled for
4439 "objdump -d" to work in djgpp.
4441 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4443 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4444 (invalid_float): Enabled general version, doesn't require running
4445 on ns32k host. Changed to take char* argument, and test for
4446 explicitly specified sizes, instead of using sizeof() on host CPU
4448 (INVALID_FLOAT): Cast first argument.
4449 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4450 list_P032, list_M032): Now const.
4451 (optlist, list_search): Made appropriate arguments now point to
4453 (print_insn_arg): Changed static array of one-character-string
4454 pointers into a static const array of characters; fixed sprintf
4455 statement accordingly.
4457 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4459 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4460 from distribution. A ns32k-dis.c from a previous distribution has
4461 been brought up to date and supports the new interface.
4463 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4465 * configure.in: add bfd_ns32k_arch target support.
4467 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4468 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4470 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4472 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4475 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4477 * h8300-dis.c, mips-dis.c: Don't use true and false.
4479 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4481 * configure.in: Change --with-targets to --enable-targets.
4483 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4485 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4486 opcodes to the first instruction with that opcode, to speed
4487 disassembly of large files. From ralphc@pyramid.com (Ralph
4490 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4492 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4494 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4496 * configure.bat: update to latest makefile.in
4498 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4500 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4501 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4502 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4503 slot insn is in a delay slot.
4504 * z8k-opc.h: (resflg): Fix patterns.
4505 * h8500-opc.h Fix CR insn patterns.
4507 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4509 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4510 "cmpl" before POWER versions, so that gas -many uses them.
4512 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4514 * disassemble.c: New file.
4515 * Makefile.in (OFILES): Add disassemble.o.
4516 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4517 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4518 binutils/configure.in.
4520 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4521 opcode being examined.
4523 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4525 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4526 (insert_ral, insert_ram, insert_ras): New functions.
4527 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4528 RAS for store with update.
4530 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4532 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4533 (edelsohn@npac.syr.edu).
4535 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4537 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4540 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4542 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4544 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4546 * ppc-opc.c (powerpc_operands): The signedp field has been
4547 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4548 instead. Add new operand SISIGNOPT.
4549 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4550 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4551 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4554 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4556 * i386-dis.c (struct private): Renamed to dis_private. `private'
4557 is a reserved word for dynix cc.
4559 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4561 * configure.in: Change error message to refer to bfd/config.bfd
4562 rather than bfd/configure.in.
4564 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4566 * ppc-opc.c: Define POWER2 as short alias flag.
4567 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4570 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4572 * i960-dis.c (print_insn_i960): Don't read a second word for
4573 opcodes 0, 1, 2 and 3.
4575 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4577 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4579 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * m68881-ext.c: Removed; no longer used.
4582 * Makefile.in: Changed accordingly.
4584 * m68k-dis.c (ext_format_68881): Don't declare.
4585 (print_insn_m68k): If an instruction uses place 'i', it uses at
4586 least four fixed bytes.
4587 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4588 extended float, convert to double using floatformat_to_double, not
4589 ieee_extended_to_double, and fetch the data before converting it.
4591 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4593 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4594 davidj@ICSI.Berkeley.EDU (David Johnson).
4596 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4598 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4599 PowerPC uses bdnz[l][a].
4601 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4603 * dis-buf.c, i386-dis.c: Include sysdep.h.
4605 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4609 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4610 by Motorola PowerPC 601 with PPC_OPCODE_601.
4611 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4612 Disassemble Motorola PowerPC 601 instructions as well as normal
4613 PowerPC instructions.
4615 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4617 * i960-dis.c (reg, mem): Just use a static array instead of
4620 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4622 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4623 condition name index if this is for a negated condition.
4625 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4626 Floating point format for 'H' operand is backwards from normal
4627 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4628 operands (fmpyadd and fmpysub), handle bizarre register
4629 translation correctly for single precision format.
4631 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4632 or 'I' operands if the next format specifier is 'M' (fcmp
4633 condition completer).
4635 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4637 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4638 single number giving a bitmask for the MB and ME fields of an M
4639 form instruction. Change NB to accept 32, and turn it into 0;
4640 also turn 0 into 32 when disassembling. Seperated SH from NB.
4641 (insert_mbe, extract_mbe): New functions.
4642 (insert_nb, extract_nb): New functions.
4643 (SC_MASK): Mask out SA and LK bits.
4644 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4645 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4646 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4647 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4648 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4649 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4650 (powerpc_macros): Define table of macro definitions.
4651 (powerpc_num_macros): Define.
4653 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4654 if PPC_OPERAND_NEXT is set.
4656 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4658 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4659 char. Retrieve contents using bfd_getl32 instead of shifting.
4661 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4663 * ppc-opc.c: New file. Opcode table for PowerPC, including
4664 opcodes for POWER (RS/6000).
4665 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4666 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4667 (CFILES): Add ppc-dis.c.
4668 (ppc-dis.o, ppc-opc.o): New targets.
4669 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4671 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4673 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4674 No space before 'u', 'f', or 'N'.
4676 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4678 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4679 farther than we should.
4681 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4683 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4685 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4687 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4689 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4690 needs it, to prevent reading past the end of a section.
4692 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4694 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4695 Removed t,A case for la; always use t,A(b) case.
4697 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4699 From Ted Lemen <mellon@pepper.ncd.com>
4700 * mips-dis.c (print_insn_arg): Handle 'k'.
4701 * mips-opc.c: Make cache use k, not t.
4703 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4705 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4706 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4707 FLOAT_FORMAT_CODE to put out floating point register names.
4709 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4711 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4713 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4715 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4717 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4719 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4720 larger than 32. Moved dsxx32 variants first for disassembler.
4722 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4724 * z8kgen.c, z8k-opc.h: Add full lda information.
4726 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4728 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4729 movb instructions. Any necessary space will be emitted by
4730 the code to handle nullification completers.
4732 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4736 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4738 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4739 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4741 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4743 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4745 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4747 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4748 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4750 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4752 * m88k-dis.c (m88kdis): comment change. Remove space after
4754 (printop): handle new arg types DEC and XREG for m88110.
4756 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4758 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4759 type for absolute branch addresses. Delete special
4760 "ble" and "be" code in 'W' operand code.
4762 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * mips-opc.c: Set hazard information correctly for branch
4765 likely instructions.
4767 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4769 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4770 info->fprintf_func for printing and info->print_address_func for
4773 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4775 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4777 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4779 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4780 Corrected second case of "b" for disassembler.
4782 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4784 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4785 to BFD swapping routines to correspond to BFD name changes.
4787 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4789 * mips-opc.c: Change div machine instruction to be z,s,t rather
4790 than s,t. Change div macro to be d,v,t rather than d,s,t.
4791 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4792 rem and remu which generates only the corresponding div
4793 instruction. This is for compatibility with the MIPS assembler,
4794 which only generates the simple machine instruction when an
4795 explicit destination of $0 is used.
4796 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4798 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4800 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4801 WR_31 hazard for bal, bgezal, bltzal.
4803 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4805 * hppa-dis.c (print_insn_hppa): Use print function
4806 from within the disassemble_info, not fprintf_filtered.
4808 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4810 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4811 Law, law@cs.utah.edu.)
4813 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4815 * mips-opc.c ("absu"): Removed.
4818 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4821 Changed hazard information to distinguish between memory load
4822 delays and coprocessor load delays.
4824 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4828 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4830 * configure.in: Don't pass cpu to config.bfd.
4832 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4834 * m88k-dis.c (m88kdis): Make class unsigned.
4836 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4838 * alpha-dis.c (print_insn_alpha): One branch format case was
4839 missing the instruction name.
4841 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4843 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4844 Add the arch-specific auxiliary files.
4845 (OFILES): Remove the arch-specific auxiliary files
4846 and use BFD_MACHINES instead of DIS_LIBS.
4847 * configure.in: Set BFD_MACHINES based on --with-targets option.
4849 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4851 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4854 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4856 * sparc-opc.c: Change CONST to const to deal with gcc
4857 -Dconst=__const -traditional.
4859 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4861 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4862 coprocessor instructions out of #if 0, and made them use new
4865 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4867 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4869 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4871 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4872 instruction, for use by the disassembler.
4874 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4875 hand-coded sign extensions that depended on 32-bit host ints.
4876 FIXME, we still depend on big-endian host bitfield ordering.
4877 (sparc_print_insn): Set the insn_info_valid field, and the
4878 other fields that describe the instruction being printed.
4880 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4882 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4883 `jmp' instead of just one of them.
4885 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4887 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4888 (fput_fp_reg_r): Renamed from fput_reg_r.
4889 (fput_fp_reg): New function.
4890 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4892 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4894 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4896 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4898 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4900 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4901 don't output a space.
4903 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4905 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4907 * mips-opc.c: New file, containing opcode table from
4908 ../include/opcode/mips.h.
4909 * Makefile.in: Add it.
4911 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4913 * m88k-dis.c: New file, moved in from gdb and changed to use the
4914 new dis-asm.h disassembler interface.
4915 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4916 (m88k-dis.o): New target.
4918 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4920 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4921 argument string const char * to correspond to opcode/mips.h.
4923 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4925 * mips-dis.c: Updated to account for name changes in new version
4927 * Makefile.in: Added header file dependencies.
4929 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4931 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4933 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4935 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4936 extend, rather than shifts.
4938 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4940 * Makefile.in: Undo 15 June change.
4942 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4944 * m68k-dis.c (print_insn_arg): Change return value to byte count
4946 * m68k-dis.c: Re-write to detect invalid operands before
4947 printing anything, so we can handle this the same way we
4948 handle invalid opcodes.
4950 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4952 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4954 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4956 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4959 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4961 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4963 * configure.in: Do make sysdep.h link.
4964 * Makefile.in: Search ../include. Don't search ../bfd.
4966 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4968 Changes from Jeff Law, law@cs.utah.edu:
4969 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4970 Do not print a space before the completers specified by
4973 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4975 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4976 defined, since gdb has been fixed.
4978 Changes from Jeff Law, law@cs.utah.edu:
4979 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4980 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4981 be a *disassemble_info, not a *FILE.
4982 * hppa-dis.c: Support 'd', '!', and 'a'.
4983 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4984 * hppa-dis.c: Delete cases which are no longer needed.
4986 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4988 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4990 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4992 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4995 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4997 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4998 * configure.in: No longer need to configure to get sysdep.h.
5000 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5002 * Patches from Jeffrey Law <law@cs.utah.edu>.
5003 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5004 templates for 1.1 FP computational instructions.
5006 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5008 * h8500-dis.c (print_insn_h8500): Address argument is type
5010 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5013 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5014 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5016 * sparc-dis.c (compare_opcodes): Move static declaration to
5019 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5021 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5022 instruction, remove unimp hack from 'l' argument.
5024 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5026 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5029 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5031 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5032 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5035 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5037 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5038 arrays of string pointers to 2-d arrays of chars, to save
5041 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5043 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5044 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5046 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5048 * hppa-dis.c: New file from Utah, adapted to new disassembler
5050 * Makefile.in: Include it.
5052 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5054 * sh-dis.c, sh-opc.h: New files.
5056 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5058 * alpha-dis.c, alpha-opc.h: New files.
5060 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5062 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5065 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5067 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5069 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5071 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5074 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5076 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5077 and double percent signs a few places.
5079 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5081 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5082 Use info->print_address_func not print_address.
5084 * dis-buf.c (generic_print_address): New function.
5086 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5088 * Makefile.in: Add sparc-dis.c.
5089 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5091 Add `add' instruction to the set that get checked
5092 for a preceding `sethi' in order to print an absolute address.
5093 * (print_insn): Disassembly prefers real instructions.
5094 (is_delayed_branch): Speed up.
5095 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5096 Still missing some float ops, and needs testing.
5097 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5098 F_ALIAS. Use printf, not fprintf, when not passing a file
5100 (compare_opcodes): Check that identical instructions have
5101 identical opcodes, complain otherwise.
5104 * Include reg_names.
5106 Use dis-asm.h/read_memory_func interface.
5108 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5110 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5111 deliberately return non-zero to setjmp from longjmp. Otherwise
5112 this code fails to compile.
5114 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5116 * m68k-dis.c: Fix prototype for fetch_arg().
5118 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5120 * dis-buf.c: New file, for new read_memory_func interface.
5121 Makefile.in (OFILES): Include it.
5122 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5123 Use new read_memory_func interface.
5125 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5127 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5128 * h8500-opc.h: Fix couple of opcodes.
5130 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5132 * Makefile.in: add dvi & installcheck targets
5134 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5136 * Makefile.in: Update for h8500-dis.c.
5138 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5140 * h8500-dis.c, h8500-opc.h: New files
5142 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5144 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5145 ../include/dis-asm.h.
5146 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5147 and ../gdb/m68k-pinsn.c).
5148 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5149 and ../gdb/i386-pinsn.c).
5150 * m68881-ext.c: New file. Moved definition of
5151 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5152 * Makefile.in: Adjust for new files.
5153 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5154 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5155 can be dis-assembled.
5157 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5159 * mips-dis.c (print_insn_arg): Now returns void.
5161 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5163 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5164 files that use the macros.
5166 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5168 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5169 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5170 (CFILES): Added mips-dis.c.
5172 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5174 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5175 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5177 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5179 * Makefile.in: Improve *clean rules.
5180 * configure.in: Allow a default host.
5182 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5184 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5185 files include other sysdep files
5187 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5189 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5191 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5193 * configure.in: For host support, use ../bfd/configure.host
5194 so it stays in sync with the ../bfd/hosts database.
5196 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5198 * configure.in: use cpu-vendor-os triple instead of nested cases
5200 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5202 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5203 *always* the wrong one.
5205 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5207 * z8kgen.c: added copyright info
5209 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5211 * z8k-dis.c (unparse_instr): prettier tabs
5212 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5214 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5216 * configure.in: Add ncr* configuration.
5217 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5218 picayune ANSI compilers happy.
5220 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5222 * configure.in (i386): Make i386 and i486 synonymous for now.
5223 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5225 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5227 * Makefile.in (install): Fix typo.
5229 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5231 * Makefile.in (make): Remove obsolete crud.
5232 (sparc-opc.o): Avoid Sun Make VPATH bug.
5234 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5236 * Makefile.in: since there are no SUBDIRS, remove rule and
5237 references of subdir_do.
5239 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5241 * Makefile.in (install): Get the library name right here too.
5242 Don't install bfd.h, since it's unrelated to this library. No
5243 subdirs to recurse into, either.
5244 (CFILES): The source file has a .c suffix, not .o.
5246 * sparc-opc.c: New file, moved from BFD.
5247 * Makefile.in (OFILES): Build it.
5249 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5251 * z8k-dis.c: fixed forward refferences of some declarations.
5253 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5255 * Makefile.in: get the name of the library right
5257 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5259 * z8k-dis.c: knows how to disassemble z8k stuff
5260 * z8k-opc.h: new file full of z8000 opcodes
5264 version-control: never
projects / external / binutils.git / blob