1 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
3 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
4 of disassemble_info structure to determine if an overlay address
5 has a matching symbol in low memory.
7 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
8 new symbol_at_address_func field in disassemble_info structure.
10 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
12 * v850-opc.c (extract_d22): Use signed arithmatic.
14 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
16 * mips-opc.c: Three op mult is not an ISA insn.
18 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
20 * mips-opc.c: Fix formatting.
22 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
24 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
25 than assuming that char is signed. Explicitly sign extend 16 bit
26 values, rather than assuming that short is 16 bits.
27 (OP_sI, OP_J, OP_DIR): Likewise.
30 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
32 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
36 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
38 * v850-opc.c: Fix typo in comment.
40 * v850-dis.c (disassemble): Add test of processor type when
43 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
45 * configure.in: Use a diversion to set enable_shared before the
49 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
51 * m68k-opc.c (TBL1): Use ! rather than `.
52 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
54 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
56 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
58 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
60 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
63 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
64 * aclocal.m4: Rebuild with new libtool.
68 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
70 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
73 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
75 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
77 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
79 * v850-opc.c (v850_opcodes): Further rearrangements.
82 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
84 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
87 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
89 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
92 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
94 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
96 * mips16-opc.c: Added mips16 sdbbp.
99 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
101 * v850-opc.c: Initialise processors field of v850_opcode structure.
104 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
106 Merge changes from Martin Hunt:
108 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
110 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
111 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
112 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
114 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
116 * d30v-dis.c (print_insn): First operand of d*i (delayed
117 branch) instructions is relative.
119 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
120 (d30v_operand_table): Add IMM6S3 type.
121 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
123 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
124 and cmp instructions.
126 * d30v-opc.c: Correct entries for repeat*, and sat*.
127 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
128 types. Correct several formats.
130 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
132 * d30v-opc.c (pre_defined_registers): Change control registers.
134 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
135 SHORT_C2. Manual was incorrect.
137 * d30v-dis.c (lookup_opcode): Return value now indicates
138 if an opcode has a short and a long form. Used for deciding
139 to append a ".s" or ".l".
140 (print_insn): Append a ".s" to an instruction if it is
141 the short form and ".l" if it is a long form. Do not append
142 anything if the instruction has only one possible size.
144 * d30v-opc.c: Change mulx2h to require an even register.
145 New form: SHORT_A2; a SHORT_A form that needs an even
146 register as the first operand.
148 * d30v-dis.c (print_insn_d30v): Fix problem where the last
149 instruction was not being disassembled if there were an odd
150 number of instructions.
152 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
156 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
158 * v850-dis.c (disassemble): Improved display of register lists.
161 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
163 * sparc-opc.c (sparc_opcodes): Fix assembler args to
164 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
165 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
166 fandnot1s, fandnot2s.
168 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
170 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
172 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
174 * cgen-asm.c (cgen_parse_address): New argument resultp.
176 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
178 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
180 * mn10200-dis.c (disassemble): PC relative instructions are
181 relative to the next instruction, not the current instruction.
183 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
185 * v850-dis.c (disassemble): Only signed extend values that are not
186 returned by extract functions.
187 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
189 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
191 * v850-opc.c: Update comments. Remove use of
192 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
194 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
196 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
198 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
200 * configure: Rebuilt with latest devo autoconf for NT support.
202 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
204 * v850-dis.c (disassemble): Use curly brace syntax for register
207 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
208 where r0 is being used as a destination register.
211 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
213 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
217 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
219 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
220 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
221 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
222 Add insns to access SGR and DBR.
223 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
226 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
228 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
231 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
233 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
234 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
237 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
239 * configure (cgen_files): Add support for v850e target.
240 * configure.in (cgen_files): Add support for v850e target.
242 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
244 * configure (cgen_files): Add support for v850eq target.
245 * configure.in (cgen_files): Add support for v850eq target.
248 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
250 * configure.in (bfd_arc_arch): Add.
251 * configure: Rebuild.
252 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
253 * Makefile.in: Rebuild.
254 * arc-dis.c, arc-opc.c: New files.
255 * disassemble.c (ARCH_all): Define ARCH_arc.
256 (disassembler): Add ARC support.
258 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
261 * v850-dis.c (disassemble): Add support for v850EQ instructions.
263 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
264 (v850_opcodes): Add v850EQ instructions.
266 * v850-dis.c (disassemble): Add support for v850E instructions.
268 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
269 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
270 insert_spe, extract_spe): New Functions.
271 (v850_opcodes): Add v850E instructions.
274 * v850-opc.c: Reorganised and re-layed out to improve readability
277 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
279 * configure: Rebuild with autoconf 2.12.1.
281 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
283 * aclocal.m4, configure: Rebuild with new automake patches.
285 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
287 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
288 * acinclude.m4: Just include acinclude.m4 from BFD.
289 * aclocal.m4, configure: Rebuild.
291 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
293 * Makefile.am: New file, based on old Makefile.in.
294 * acconfig.h: New file.
295 * acinclude.m4: New file.
296 * stamp-h.in: New file.
297 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
298 Removed shared library handling; now handled by libtool. Replace
299 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
300 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
301 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
302 handling in AC_OUTPUT.
303 * dep-in.sed: Change .o to .lo.
304 * Makefile.in: Now built with automake.
305 * aclocal.m4: Now built with aclocal.
306 * config.in, configure: Rebuild.
308 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
310 * mips-opc.c: Fix typo/thinko in "eret" instruction.
313 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
315 * mips-opc.c: Fix coding of mtsa.
318 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
320 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
322 * sparc-dis.c (sorted_opcodes): New static local.
323 (struct opcode_hash): `opcode' is pointer to const element.
324 (build_hash): First arg is now table of sorted pointers.
325 (print_insn_sparc): Sort opcodes by sorting table of pointers.
326 (compare_opcodes): Update.
328 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
330 * cgen-opc.c: #include <ctype.h>.
331 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
332 Handle case insensitive hashing.
333 (hash_keyword_value): Change type of `value' to unsigned int.
335 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
337 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
338 precision FP, mark it as such. Likewise for double precision
339 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
342 (mips_builtin_opcodes): Remove non-existant r5900 instructions
346 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
348 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
349 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
352 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
354 * ppc-opc.c (extract_nsi): make unsigned expression signed before
356 (UNUSED): remove one level of parens, so MSVC doesn't choke on
357 nesting depth when all the macros are expanded.
359 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
361 * sparc-opc.c: The fcmp v9a instructions take an integer register
362 as a destination, not a floating point register. From Christian
363 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
365 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
367 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
368 syntax. From Roman Hodek
369 <rnhodek@faui22c.informatik.uni-erlangen.de>.
371 * i386-dis.c (twobyte_has_modrm): Fix pand.
373 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
375 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
377 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
379 * arm-dis.c: Add prototypes for arm_decode_shift and
382 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
384 * mips-opc.c: Add r3900 insns.
386 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
388 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
389 print delay slot instructions on the same line. When using a PC
390 relative load, add a comment with the value being loaded if it can
393 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
395 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
396 to pushS/popS for segment regs and byte constant so that
397 pushw/popw printed when in 16 bit data mode.
399 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
400 print cbtw, cwtd in 16 bit data mode.
401 * i386-dis.c (putop): extra case W to support above.
403 * i386-dis.c (print_insn_x86): print addr32 prefix when given
404 address size prefix in 16 bit address mode.
406 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
408 * sh-dis.c: Reindent. Rename local variable fprintf to
411 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
413 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
415 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
417 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
419 * mips16-opc.c (mip16_opcodes): same.
421 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
423 * m68k-opc.c (moveb): Change $d to %d.
425 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
427 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
428 (twobyte_has_modrm): Likewise.
430 (OP_MMX, OP_EM, OP_MS): New static functions.
432 * i386-dis.c: Revert patch of April 4. The output now matches
435 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
437 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
440 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
442 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
444 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
446 * Makefile.in (install): Depend upon installdirs.
447 (installdirs): New target.
449 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
451 From Thomas Graichen <graichen@rzpd.de>:
452 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
453 * configure: Rebuild.
455 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
457 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
458 Delete string{,s}.h support.
460 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
462 * cgen-asm.c (cgen_parse_operand_fn): New global.
463 (cgen_parse_{{,un}signed_integer,address}): Update call to
464 cgen_parse_operand_fn.
465 (cgen_init_parse_operand): New function.
466 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
467 from cgen_asm_init_parse.
468 (m32r_cgen_assemble_insn): New operand `errmsg'.
469 Delete call to as_bad, return error message to caller.
470 (m32r_cgen_asm_hash_keywords): #if 0 out.
472 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
474 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
476 [case 'J']: Fix typo in register name.
478 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
480 * configure.in: Substitute SHLIB_LIBS.
481 * configure: Rebuild.
482 * Makefile.in (SHLIB_LIBS): New variable.
483 ($(SHLIB)): Use $(SHLIB_LIBS).
485 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
487 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
489 * cgen-opc.c (hash_keyword_name): Improve algorithm.
491 * disassemble.c (disassembler): Handle m32r.
493 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
495 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
496 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
497 * Makefile.in (CFILES): Add them.
498 (ALL_MACHINES): Add them.
499 (dependencies): Regenerate.
500 * configure.in (cgen_files): New variable.
501 (bfd_m32r_arch): Add entry.
502 * configure: Regenerate.
504 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
506 * configure.in: Correct file names for bfd_mn10[23]00_arch.
507 * configure: Rebuild.
509 * Makefile.in: Rebuild dependencies.
511 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
513 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
516 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
518 * Branched binutils 2.8.
520 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
522 * m10200-dis.c: Rename from mn10200-dis.c.
523 * m10200-opc.c: Rename from mn10200-opc.c.
524 * m10300-dis.c: Rename from mn10300-dis.c
525 * m10300-opc.c: Rename from mn10300-opc.c.
526 * Makefile.in: Update accordingly.
528 * mips16-opc.c: Add mul and dmul macros.
530 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
532 * makefile.vms: Update CFLAGS, add clean target.
534 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
536 * mips-opc.c: Add "wait". From Ralf Baechle
537 <ralf@gnu.ai.mit.edu>.
539 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
540 * configure, config.in: Rebuild.
541 * sysdep.h: Include <stdlib.h> if it exists.
542 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
544 * Makefile.in: Rebuild dependencies.
546 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
548 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
549 Andrew Bray <andy@madhouse.demon.co.uk>.
551 * mips-opc.c: Add cast when setting mips_opcodes.
553 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
555 * v850-dis.c (disassemble): Fix sign extension problem.
556 * v850-opc.c (extract_d*): Fix sign extension problems to make
557 disassembly calculate branch offsets correctly.
559 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
561 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
563 * mips-opc.c: Add dctr and dctw.
566 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
568 * d30v-dis.c (print_insn): Change the way signed constants
571 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
573 * Makefile.in (BFD_H): New variable.
574 (HFILES): New variable.
575 (CFILES): Add all C files.
576 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
577 Delete old dependencies, and build new ones.
578 * dep-in.sed: New file.
580 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
582 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
584 start-sanitize-coldfire
585 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
587 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
590 end-sanitize-coldfire
591 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
593 * mn10200-opc.c: Change "trap" to "syscall".
594 * mn10300-opc.c: Add new "syscall" instruction.
596 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
598 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
599 mulul insns on the coldfire.
601 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
603 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
604 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
605 (print_insn_little_arm): Likewise.
607 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
609 Based on patches from H.J. Lu <hjl@lucon.org>:
610 * i386-dis.c (fetch_data): Add prototype.
611 * m68k-dis.c (fetch_data): Add prototype.
612 (dummy_print_address): Add prototype. Make static.
613 * ppc-opc.c (valid_bo): Add prototype.
614 * sparc-dis.c (build_hash_table): Add prototype.
615 (is_delayed_branch, compute_arch_mask): Add prototypes.
616 (print_insn_sparc): Make several local variables const.
617 (compare_opcodes): Change arguments to const PTR. Add prototype.
618 * sparc-opc.c (arg): Change name field to be const.
619 (lookup_name, lookup_value): Add prototypes. Change table and
620 name parameters to be const.
621 (sparc_encode_asi): Change name parameter to be const.
622 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
623 (sparc_encode_sparclet_cpreg): Likewise.
624 (sparc_decode_asi): Change return type to be const.
625 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
626 (sparc_decode_sparclet_cpreg): Likewise.
628 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
630 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
631 Solaris doesn't like the combined options, and the -f is
633 (stamp-tshlink, install): Likewise.
635 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
637 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
640 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
642 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
644 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
646 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
649 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
651 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
654 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
656 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
658 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
660 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
663 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
665 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
666 floatformat_to_double to make portable.
667 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
670 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
672 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
673 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
675 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
677 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
678 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
681 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
683 * tic80-opc.c (LSI_SCALED): Renamed from this ...
684 (OFF_SL_BR_SCALED): ... to this, and added the flag
685 TIC80_OPERAND_BASEREL to the flags word.
686 (tic80_opcodes): Replace all occurances of LSI_SCALED with
690 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
692 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
693 Change mips_opcodes from const array to a pointer,
694 and change bfd_mips_num_opcodes from const int to int,
695 so that we can increase the size of the mips opcodes table
699 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
701 * tic80-opc.c (tic80_predefined_symbols): Revert change to
702 store BITNUM values in the table in one's complement form
703 to match behavior when assembler is given a raw numeric
704 value for a BITNUM operand.
705 * tic80-dis.c (print_operand_bitnum): Ditto.
709 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
711 * d30v-opc.c: Removed references to FLAG_X.
714 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
716 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
719 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
721 * Makefile.in: Added d30v object files.
722 * configure: (bfd_d30v_arch) Rebuilt.
723 * configure.in: (bfd_d30v_arch) Added new case.
724 * d30v-dis.c: New file.
725 * d30v-opc.c: New file.
726 * disassemble.c (disassembler) Add entry for d30v.
730 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
732 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
733 representations for the floating point BITNUM values.
735 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
737 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
738 in the table in one's complement form, as they appear in the
740 (tic80_symbol_to_value): Use macros to access predefined
742 (tic80_value_to_symbol): Ditto.
743 (tic80_next_predefined_symbol): New function.
744 * tic80-dis.c (print_operand_bitnum): Remove code that did
745 one's complement for BITNUM values.
749 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
751 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
754 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
756 * makefile.vms: Remove 8 bit characters. Update to latest
759 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
761 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
763 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
765 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
766 (IMM24_PCREL): Likewise.
768 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
770 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
771 address for an extended PC relative instruction that is not a
774 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
776 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
780 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
782 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
783 (tic80_opcodes): Sort entries so that long immediate forms
784 come after short immediate forms, making it easier for
785 assembler to select the right one for a given operand.
788 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
790 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
792 (print_insn_mips16): Likewise.
795 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
797 * mips-opc.c: add r5900.
801 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
803 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
804 a symbol class that restricts translation to just that
805 class (general register, condition code, etc).
807 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
809 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
810 and REG_DEST_E for register operands that have to be
811 an even numbered register. Add REG_FPA for operands that
812 are one of the floating point accumulator registers.
813 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
814 (tic80_opcodes): Change entries that need even numbered
815 register operands to use the new operand table entries.
816 Add "or" entries that are identical to "or.tt" entries.
819 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
821 * mips16-opc.c: Add new cases of exit instruction for
823 * mips-dis.c (print_mips16_insn_arg): Display floating point
824 registers in operands of exit instruction. Print `$' before
825 register names in operands of entry and exit instructions.
828 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
830 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
831 pairs for all predefined symbols recognized by the assembler.
832 Also used by the disassembling routines.
833 (tic80_symbol_to_value): New function.
834 (tic80_value_to_symbol): New function.
835 * tic80-dis.c (print_operand_control_register,
836 print_operand_condition_code, print_operand_bitnum):
837 Remove private tables and use tic80_value_to_symbol function.
840 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
842 * d10v-dis.c (print_operand): Change address printing
843 to correctly handle PC wrapping. Fixes PR11490.
845 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
847 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
850 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
852 * mips-dis.c (print_insn_mips16): Set insn_info information.
853 (print_mips16_insn_arg): Likewise.
855 * mips-dis.c (print_insn_mips16): Better handling of an extend
856 opcode followed by an instruction which can not be extended.
858 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
860 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
861 coldfire moveb instruction to not allow an address register as
862 destination. Although the documentation does not indicate that
863 this is invalid, experiments uncovered unexpected behavior.
864 Added a comment explaining the situation. Thanks to Andreas
865 Schwab for pointing this out to me.
868 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
870 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
871 entries are presorted so that entries with the same mnemonic are
872 adjacent to each other in the table. Sort the entries for each
873 instruction so that this is true.
876 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
878 * m68k-dis.c: Include <libiberty.h>.
879 (print_insn_m68k): Sort the opcode table on the most significant
880 nibble of the opcode.
883 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
885 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
886 "vsub", "vst", "xnor", and "xor" instructions.
887 (V_a1): Renamed from V_a, msb of accumulator reg number.
888 (V_a0): Add macro, lsb of accumulator reg number.
890 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
892 * tic80-dis.c (print_insn_tic80): Broke excessively long
893 function up into several smaller ones and arranged for
894 the instruction printing function to be callable recursively
895 to print vector instructions that have both a load and a
896 math instruction packed into a single opcode.
897 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
898 to explain why it comes after the other vector opcodes.
901 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
903 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
904 move insns to handle immediate operands.
906 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
908 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
909 fix operand mask in the "moveml" entries for the coldfire.
912 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
914 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
915 New macros for building vector instruction opcodes.
916 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
917 FMT_LI, which were unused. The field is now a flags field.
918 Remove some opcodes that are possible, but illegal, such
919 as long immediate instructions with doubles for immediate
920 values. Add "vadd" and "vld" instructions.
922 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
924 * tic80-opc.c (tic80_operands): Reorder some table entries to make
925 the order more logical. Move the shift alias instructions ("rotl",
926 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
927 interspersed with the regular sr.x and sl.x instructions. Add
928 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
929 "sub", "subu", "swcr", and "trap".
931 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
933 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
934 (OFF_SL_PC): Renamed from OFF_SL.
935 (OFF_SS_BR): New operand type for base relative operand.
936 (OFF_SL_BR): New operand type for base relative operand.
937 (REG_BASE): New operand type for base register operand.
938 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
939 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
940 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
942 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
943 10 char field, padded with spaces on rhs, rather than a string
944 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
945 than old TIC80_OPERAND_RELATIVE. Add support for new
946 TIC80_OPERAND_BASEREL flag bit.
948 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
950 * tic80-dis.c (print_insn_tic80): Print floating point operands
952 * tic80-opc.c (SPFI): Add single precision floating point
953 immediate operand type.
954 (ROTATE): Add rotate operand type for shifts.
955 (ENDMASK): Add for shifts.
956 (n): Macro for the 'n' bit.
957 (i): Macro for the 'i' bit.
958 (PD): Macro for the 'PD' field.
959 (P2): Macro for the 'P2' field.
960 (P1): Macro for the 'P1' field.
961 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
965 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
967 * mn10200-dis.c (disassemble): Mask off unwanted bits after
968 adding in current address for pc-relative operands.
971 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
973 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
974 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
975 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
976 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
977 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
978 REG_BASE_M_SI, REG_BASE_M_LI respectively.
979 (REG_SCALED, LSI_SCALED): New operand types.
980 (E): New macro for 'E' bit at bit 27.
981 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
982 opcodes, including the various size flavors (b,h,w,d) for
983 the direct load and store instructions.
985 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
987 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
989 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
990 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
991 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
992 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
993 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
994 masks with "MASK_* & ~M_*" to get the M bit reset.
995 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
997 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
999 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1000 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1001 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1003 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1004 CC, SICR, and LICR table entries.
1005 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1006 "bcnd", and "brcr" opcodes.
1009 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1011 * ppc-opc.c (powerpc_operands): Make comment match the
1012 actual fields (no shift field).
1013 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1014 start-sanitize-tic80
1015 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1016 partial implementation, work in progress.
1017 * tic80-opc.c (tic80_operands): Begin construction operands table.
1018 (tic80_opcodes): Continue populating opcodes table and start
1019 filling in the operand indices.
1020 (tic80_num_opcodes): Add this.
1023 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1025 * m68k-opc.c: Add #B case for moveq.
1027 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1029 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1030 before they are used.
1032 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1034 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1035 for "breakpoint" instruction.
1037 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1039 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1040 (dep): Use ALL_CFLAGS rather than CFLAGS.
1042 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1044 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1047 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1049 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1050 start-sanitize-tic80
1051 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1054 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1056 * mips16-opc.c: Add "abs".
1058 start-sanitize-tic80
1059 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1061 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1062 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1063 (disassembler): Add bfd_arch_tic80 support to set disassemble
1064 to print_insn_tic80.
1065 * tic80-dis.c (print_insn_tic80): Add stub.
1067 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1069 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1070 * configure: Regenerate with autoconf.
1071 * tic80-dis.c: Add file.
1072 * tic80-opc.c: Add file.
1075 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1077 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1079 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1081 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1082 (mn10200_opcodes): Use it for some logicals and btst insns.
1083 Add "break" and "trap" instructions.
1085 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1087 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1089 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1091 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1092 relative load or add now depends upon whether the instruction is
1095 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1097 * mn10200-dis.c: Finish writing disassembler.
1098 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1099 Fix mask for "jmp (an)".
1101 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1102 handle endianness issues for mn10300.
1104 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1106 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1108 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1109 instruction. Fix opcode field for "movb (imm24),dn".
1111 * mn10200-opc.c (mn10200_operands): Fix insertion position
1114 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1116 * mn10200-opc.c: Create mn10200 opcode table.
1117 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1118 but moving along nicely.
1120 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1122 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1124 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1126 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1127 specifiers for fmovem* instructions.
1129 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1131 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1133 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1135 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1138 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1140 * mn10300-opc.c: Add some comments explaining the various
1143 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1145 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1147 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1150 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1151 operand specifiers in fmovm* instructions.
1153 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1155 * ppc-opc.c (insert_li): Give an error if the offset has the two
1156 least significant bits set.
1158 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1160 * mips-dis.c (print_insn_mips16): Separate the instruction from
1161 the arguments with a tab, not a space.
1163 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1165 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1168 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1171 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1173 * configure: Rebuild with autoconf 2.12.
1175 Add support for mips16 (16 bit MIPS implementation):
1176 * mips16-opc.c: New file.
1177 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1178 (mips16_reg_names): New static array.
1179 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1180 after seeing a 16 bit symbol.
1181 (print_insn_little_mips): Likewise.
1182 (print_insn_mips16): New static function.
1183 (print_mips16_insn_arg): New static function.
1184 * mips-opc.c: Add jalx instruction.
1185 * Makefile.in (mips16-opc.o): New target.
1186 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1187 * configure: Rebuild.
1189 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1191 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1192 operand specifiers in *save, *restore and movem* instructions.
1194 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1197 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1198 register operands for immediate arithmetic, not, neg, negx, and
1199 set according to condition instructions.
1201 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1202 specifier of the effective-address operand in immediate forms of
1203 arithmetic instructions. The specifier for the immediate operand
1204 notes how and where the constant will be stored.
1206 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1208 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1211 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1214 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1216 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1218 * mn10300-dis.c (disassemble): Handle register lists.
1220 * mn10300-opc.c: Fix handling of register list operand for
1221 "call", "ret", and "rets" instructions.
1223 * mn10300-dis.c (disassemble): Print PC-relative and memory
1224 addresses symbolically if possible.
1225 * mn10300-opc.c: Distinguish between absolute memory addresses,
1226 pc-relative offsets & random immediates.
1228 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1230 (disassemble): Handle SPLIT and EXTENDED operands.
1232 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1234 * mn10300-dis.c: Rough cut at printing some operands.
1236 * mn10300-dis.c: Start working on disassembler support.
1237 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1239 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1241 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1243 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1245 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1247 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1249 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1250 register argument is calls and jmp instructions.
1252 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1254 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1255 getx operand. Fix opcode for mulqu imm,dn.
1257 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1259 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1260 in MN10300_OPERAND_SPLIT operands for how many bits
1261 appear in the basic insn word. Add IMM32_HIGH24,
1262 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1263 (mn10300_opcodes): Use new operands as needed.
1265 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1266 for bset, bclr, btst instructions.
1267 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1269 * mn10300-opc.c (mn10300_operands): Remove many redundant
1270 operands. Update opcode table as appropriate.
1271 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1272 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1274 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1276 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1277 operands (for indexed load/stores). Fix bitpos for DI
1278 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1279 few instructions that insert immediates/displacements in the
1280 middle of the instruction. Add IMM8E for 8 bit immediate in
1281 the extended part of an instruction.
1282 (mn10300_operands): Use new opcodes as appropriate.
1284 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1286 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1287 sequential so the assembler never parallelizes it with
1290 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1292 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1293 a data/address register that appears in register field 0
1294 and register field 1.
1295 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1297 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1299 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1300 standard disassembly.
1302 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1303 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1304 Recategorize PALcode instructions.
1306 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1308 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1310 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1312 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1313 there are no operand types.
1315 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1317 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1319 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1321 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1323 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1325 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1327 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1328 and sst.w instructions.
1330 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1333 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1335 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1338 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1340 * ppc-opc.c (PPCPWR2): Define.
1341 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1344 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1346 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1347 field for movhu instruction.
1349 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1350 cast value to "long" not "signed long" to keep hpux10
1353 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1355 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1358 * mn10300-opc.c (FMT*): Remove definitions.
1360 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1361 for shift-by-register opcodes.
1363 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1364 into [AD][MN][01] for encoding the position of the register
1367 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1369 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1370 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1372 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1374 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1375 Fix various typos. Add "PAREN" operand.
1376 (MEM, MEM2): Define.
1377 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1378 operands. Fix several typos.
1380 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1383 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1385 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1386 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1388 (mn10300_opcodes): Break opcode format out into its own field.
1389 Update many operand fields to deal with signed vs unsigned
1390 issues. Fix one or two typos in the "mov" instruction
1391 opcode, mask and/or operand fields.
1393 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1395 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1396 m68851 wasn't reset.
1398 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1400 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1401 all opcodes. Very rough cut at operands for all opcodes.
1403 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1406 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1408 * mn10200-opc.c, mn10300-opc.c: New files.
1409 * mn10200-dis.c, mn10300-dis.c: New files.
1410 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1411 * disassemble.c: Break mn10x00 support into 10200 and 10300
1413 * configure.in: Likewise.
1414 * configure: Rebuilt.
1416 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1418 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1420 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1422 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1424 * disassemble (ARCH_mn10x00): Define.
1425 (disassembler): Handle bfd_arch_mn10x00.
1426 * configure.in: Recognize bfd_mn10x00_arch.
1427 * configure: Rebuilt.
1429 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1431 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1432 accordingly. Don't declare functions using op_rtn.
1434 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1436 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1437 params to be more standard.
1438 * (disassemble): Print absolute addresses and symbolic names for
1439 branch and jump targets.
1440 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1442 * (v850_opcodes): Add breakpoint insn.
1444 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1446 * m68k-opc.c: Move the fmovemx data register cases before the
1447 other cases, so that they get recognized before the data register
1448 does gets treated as a degenerate register list.
1450 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1452 * mips-opc.c: Add a case for "div" and "divu" with two registers
1453 and a destination of $0.
1455 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1457 * mips-dis.c (print_insn_arg): Add prototype.
1458 (_print_insn_mips): Ditto.
1460 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1462 * mips-dis.c (print_insn_arg): Print condition code registers as
1465 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1467 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1469 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1471 * v850-dis.c (disassemble): Make static. Provide prototype.
1473 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1475 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1478 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1480 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1481 ']' characters into the output stream.
1482 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1483 Add "memop" field to all opcodes (for the disassembler).
1484 Reorder opcodes so that "nop" comes before "mov" and "jr"
1485 comes before "jarl".
1487 * v850-dis.c (print_insn_v850): Fix typo in last change.
1489 * v850-dis.c (print_insn_v850): Properly handle disassembling
1490 a two byte insn at the end of a memory region when the memory
1491 region's size is only two byte aligned.
1493 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1495 * v850-dis.c (v850_reg_names): Define.
1496 (v850_sreg_names, v850_cc_names): Likewise.
1497 (disassemble): Very rough cut at printing operands (unformatted).
1499 * v850-opc.c (BOP_MASK): Fix.
1500 (v850_opcodes): Fix mask for jarl and jr.
1502 * v850-dis.c: New file. Skeleton for disassembler support.
1503 * Makefile.in Remove v850 references, they're not needed here.
1504 * configure.in: Add v850-dis.o when building v850 toolchains.
1505 * configure: Rebuilt.
1506 * disassemble.c (disassembler): Call v850 disassembler.
1508 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1509 (insert_d8_6, extract_d8_6): New functions.
1510 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1511 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1513 (IF4A, IF4B): Use "D7" instead of "D7S".
1514 (IF4C, IF4D): Use "D8_7" instead of "D8".
1515 (IF4E, IF4F): New. Use "D8_6".
1516 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1517 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1519 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1520 (v850_operands): Change D16 to D16_15, use special insert/extract
1521 routines. New new D16 that uses the generic insert/extract code.
1522 (IF7A, IF7B): Use D16_15.
1523 (IF7C, IF7D): New. Use D16.
1524 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1526 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1527 message. Issue an error if the branch offset is odd.
1529 * v850-opc.c: Add notes about needing special insert/extract
1530 for all the load/store insns, except "ld.b" and "st.b".
1532 * v850-opc.c (insert_d22, extract_d22): New functions.
1533 (v850_operands): Use insert_d22 and extract_d22 for
1535 (insert_d9): Fix range check.
1537 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1539 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1540 and set bits field to D9 and D22 operands.
1542 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1544 * v850-opc.c (v850_operands): Define SR2 operand.
1545 (v850_opcodes): "ldsr" uses R1,SR2.
1547 * v850-opc.c (v850_opcodes): Fix opcode specs for
1548 sld.w, sst.b, sst.h, sst.w, and nop.
1550 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1552 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1553 end of the opcode table.
1555 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1557 * d10v-opc.c (pre_defined_registers): Added register pairs,
1558 "r0-r1", "r2-r3", etc.
1560 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1562 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1563 Create I16U for an unsigned 16bit mmediate operand.
1564 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1566 * v850-opc.c (v850_operands): Define EP operand.
1567 (IF4A, IF4B, IF4C, IF4D): Use EP.
1569 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1570 with immediate operand, "movhi". Tweak "ldsr".
1572 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1573 correct. Get sld.[bhw] and sst.[bhw] closer.
1575 * v850-opc.c (v850_operands): "not" is a two byte insn
1577 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1579 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1581 * v850-opc.c (two): Get order of words correct.
1583 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1585 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1586 register source and destination operands.
1587 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1589 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1590 same thinko in "trap" opcode.
1592 * v850-opc.c (v850_opcodes): Add initializer for size field
1595 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1596 Add D8 for 8-bit unsigned field in short load/store insns.
1597 (IF4A, IF4D): These both need two registers.
1598 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1599 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1600 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1601 for "ldsr" and "stsr".
1602 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1605 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1606 short store word (sst.w).
1608 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1610 * v850-opc.c (v850_operands): Added insert and extract fields,
1611 pointers to functions that handle unusual operand encodings.
1613 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1615 * v850-opc.c (v850_opcodes): Enable "trap".
1617 * v850-opc.c (v850_opcodes): Fix order of displacement
1618 and register for "set1", "clr1", "not1", and "tst1".
1620 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1622 * v850-opc.c (v850_operands): Add "B3" support.
1623 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1626 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1628 * v850-opc.c: Close unterminated comment.
1630 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1632 * v850-opc.c (v850_operands): Add flags field.
1633 (v850_opcodes): add move opcodes.
1635 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1637 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1638 * configure: (bfd_v850v_arch) Add new case.
1639 * configure.in: (bfd_v850_arch) Add new case.
1640 * v850-opc.c: New file.
1642 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1644 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1646 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1648 * d10v-opc.c: Add additional information to the opcode
1649 table to help determinine which instructions can be done
1652 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1654 * mpw-make.sed: Update editing of include pathnames to be
1657 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1659 * arm-opc.h: Added "bx" instruction definition.
1661 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1663 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1665 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1667 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1669 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1671 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1673 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1675 * makefile.vms: Update for alpha-opc changes.
1677 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1679 * i386-dis.c (print_insn_i386): Actually return the correct value.
1680 (ONE, OP_ONE): #ifdef out; not used.
1682 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1684 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1685 Changed subi operand type to treat 0 as 16.
1687 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1689 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1692 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1694 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1695 memory transfer instructions. Add new format string entries %h and %s.
1696 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1699 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1701 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1702 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1704 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1706 * alpha-dis.c (print_insn_alpha_osf): Remove.
1707 (print_insn_alpha_vms): Remove.
1708 (print_insn_alpha): Make globally visible. Chose the register
1709 names based on info->flavour.
1710 * disassemble.c: Always return print_insn_alpha for the alpha.
1712 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1714 * d10v-dis.c (dis_long): Handle unknown opcodes.
1716 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1718 * d10v-opc.c: Changes to support signed and unsigned numbers.
1719 All instructions with the same name that have long and short forms
1720 now end in ".l" or ".s". Divs added.
1721 * d10v-dis.c: Changes to support signed and unsigned numbers.
1723 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1725 * d10v-dis.c: Change all functions to use info->print_address_func.
1727 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1729 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1730 move ccr/sr insns more strict so that the disassembler only
1731 selects them when the addressing mode is data register.
1733 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1734 * d10v-opc.c (pre_defined_registers): Declare.
1735 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1736 to pick a better name for the registers.
1738 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1740 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1741 operands for fexpand and fpmerge. From Christian Kuehnke
1742 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1744 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1746 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1747 print routine. Take new regnames and cpumask arguments.
1748 Kill the environment variable nonsense.
1749 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1750 (print_insn_alpha_vms): New function. Do VMS style regnames.
1751 * disassemble.c (disassembler): Test bfd flavour to pick
1752 between OSF and VMS routines. Default to OSF.
1754 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1756 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1757 * configure: Rebuild.
1758 * Makefile.in (install): Use @INSTALL_SHLIB@.
1760 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1762 * configure: (bfd_d10v_arch) Add new case.
1763 * configure.in: (bfd_d10v_arch) Add new case.
1764 * d10v-dis.c: New file.
1765 * d10v-opc.c: New file.
1766 * disassemble.c (disassembler) Add entry for d10v.
1768 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1770 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1771 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1773 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1775 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1776 distinguish between variants of the instruction set.
1777 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1778 distinguish between variants of the instruction set.
1780 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1782 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1783 the 8086 instruction set.
1784 * i386-dis.c: General cleanups. Make most things static. Add
1785 prototypes. Get rid of static variables aflags and dflags. Pass
1786 them as args (to almost everything).
1788 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1790 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1792 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1794 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1795 if the next arg is marked with SRC_IN_DST. Gross.
1797 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1798 we're looking for and find EXR.
1800 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1801 if we're looking for KBIT and we don't find it.
1803 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1806 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1807 3bit immediate operands.
1809 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1811 * Released binutils 2.7.
1813 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1814 <kkaempf@progis.ac-net.de>.
1816 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1818 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1820 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1822 * sparc-dis.c (print_insn_sparclite): New routine to print
1823 sparclite instructions.
1825 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1827 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1829 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1831 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1832 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1833 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1835 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1837 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1838 Use autoconf-set values.
1839 (docdir, oldincludedir): Removed.
1840 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1842 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1844 * alpha-opc.c: New file.
1845 * alpha-opc.h: Remove.
1846 * alpha-dis.c: Complete rewrite to use new opcode table.
1847 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1848 * configure: Rebuild with autoconf 2.10.
1849 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1850 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1852 (alpha-opc.o): New target.
1854 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1856 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1857 Set imm_added_to_rs1 even if the source and destination register
1860 * sparc-opc.c: Add some two operand forms of the wr instruction.
1862 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1864 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1867 * disassemble.c (disassembler): Handle H8/S.
1868 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1870 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1872 * sparc-opc.c: Add beq/teq as aliases for be/te.
1874 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1875 <sergei@msil.sps.mot.com>.
1877 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1879 * makefile.vms: New file.
1881 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1883 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1885 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1888 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1890 * i386-dis.c (OP_OFF): Call append_prefix.
1892 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1894 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1895 unsigned long to silence a warning from the Solaris PowerPC
1898 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1900 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1902 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1904 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1906 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1907 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1908 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1909 cpush, cpusha, cpull sparclet insns.
1911 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1913 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1915 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1917 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1918 Set F_FLOAT on other floating point instructions.
1920 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1922 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1924 (powerpc_opcodes): Add 860/821 specific SPRs.
1926 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * configure.in: Permit --enable-shared to specify a list of
1929 directories. Set and substitute BFD_PICLIST.
1930 * configure: Rebuild.
1931 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1932 uses. Set to @BFD_PICLIST@.
1934 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1936 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1937 not "abs", which may be needed for the absolute in something
1938 like btst #0,@10:8. Print L_3 immediates separately from other
1939 immediates. Change ABSMOV reference to ABS8MEM.
1941 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1943 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1944 (current_arch_mask): New static global.
1945 (compute_arch_mask): New static function.
1946 (print_insn_sparc): Delete sparc_v9_p. New static local
1947 current_mach. Resort opcode table if current_mach changes.
1948 Generalize "insn not supported" test.
1949 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1950 Delete test for v9/!v9.
1951 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1953 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1954 (brfcx): Renamed to FBRX.
1955 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1956 coprocessor mnemonics are not supported on the sparclet).
1957 (condf): Renamed to CONDF.
1958 (SLCBCC2): Delete F_ALIAS flag.
1960 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1962 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1963 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1965 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1967 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1968 that the shared library version number is set correctly.
1970 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1972 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1973 Miles Bader <miles@gnu.ai.mit.edu>.
1974 * configure: Rebuild.
1976 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1978 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1981 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1983 * configure: Rebuild with autoconf 2.8.
1985 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1987 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1988 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1990 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1992 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1993 since they appear as targets in Makefile.in.
1994 * configure: Rebuild.
1996 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1998 * mpw-make.sed: Edit out shared library support bits.
2000 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2002 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2003 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2004 (sparc_opcodes): Add sparclet insns.
2005 (sparclet_cpreg_table): New static local.
2006 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2007 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2009 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2011 * i386-dis.c (index16): New static variable.
2012 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2014 (OP_indirE): Return result of OP_E.
2015 (OP_E): Check for 16 bit addressing mode, and disassemble
2016 correctly. Optimised 32 bit case a little. Don't print
2017 "(base,index,scale)" when sib specifies only an offset.
2019 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2021 * configure.in: Set and substitute SHLIB_DEP.
2022 * configure: Rebuild.
2023 * Makefile.in (SHLIB_DEP): New variable.
2024 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2025 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2026 COMMON_SHLIB, add them to piclist with appropriate modifications.
2027 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2028 here: just use piclist.
2030 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2032 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2033 (print_insn_sparc): Rewrite v9/not-v9 tests.
2034 (compare_opcodes): Likewise.
2035 * sparc-opc.c (MASK_<ARCH>): Define.
2036 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2037 (sparclet,v6notv9): Define.
2038 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2039 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2041 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2043 * configure.in: Call AC_PROG_CC before configure.host.
2044 * configure: Rebuild.
2046 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2048 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2050 * i386-dis.c (onebyte_has_modrm): New static array.
2051 (twobyte_has_modrm): New static array.
2052 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2054 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2056 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2059 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2061 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2064 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2066 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2067 m68010up, not just m68020up | cpu32.
2069 * Makefile.in (SONAME): New variable.
2070 ($(SHLINK)): Make a link to the transformed name, as well.
2071 (stamp-tshlink): New target.
2072 (install): Skip stamp-tshlink during install.
2074 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2076 * configure.in: Call AC_ARG_PROGRAM.
2077 * configure: Rebuild.
2078 * Makefile.in (program_transform_name): New variable.
2079 (install): Transform library name before installing it.
2081 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2083 * i960-dis.c (mem): Add HX dcinva instruction.
2085 Support for building as a shared library, based on patches from
2086 Alan Modra <alan@spri.levels.unisa.edu.au>:
2087 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2088 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2089 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2090 * configure: Rebuild.
2091 * Makefile.in (ALLLIBS): New variable.
2092 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2093 (COMMON_SHLIB, SHLINK): New variables.
2094 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2095 (STAGESTUFF): Remove variable.
2096 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2097 (stamp-piclist, piclist): New targets.
2098 ($(SHLIB), $(SHLINK)): New targets.
2099 ($(OFILES)): Depend upon stamp-picdir.
2100 (disassemble.o): Build twice if PICFLAG is set.
2101 (MOSTLYCLEAN): Add pic/*.o.
2102 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2103 (distclean): Remove pic and stamp-picdir.
2104 (install): Install shared libraries.
2105 (stamp-picdir): New target.
2107 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2109 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2110 Print unknown instruction as "unknown", rather than in hex.
2112 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2114 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2116 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2118 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2120 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2122 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2123 when necessary. From Ulrich Drepper
2124 <drepper@myware.rz.uni-karlsruhe.de>.
2126 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2128 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2129 sparc_num_opcodes. Update architecture enum values.
2130 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2131 (sparc_opcode_lookup_arch): New function.
2132 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2133 (sparc_opcodes): Add v9a shutdown insn.
2135 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2137 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2138 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2140 (print_insn_sparc64): Deleted.
2141 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2144 * sparc-opc.c (architecture_pname): Add v9a.
2146 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2148 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2149 incorrectly defined as 0x16 when it should be 0x15.
2150 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2151 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2152 excb (exception barrier) which is defined in the Alpha
2153 Architecture Handbook version 2.
2154 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2155 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2156 disassembled as or, for example.
2158 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2160 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2161 (_print_insn_mips): Change i from int to unsigned int.
2163 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2165 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2166 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2168 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2170 * i386-dis.c: Added Pentium Pro instructions.
2172 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2174 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2177 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2179 * sh-opc.h (sh_nibble_type): Added REG_B.
2180 (sh_arg_type): Added A_REG_B.
2181 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2183 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2185 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2187 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2189 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2191 * Makefile.in (distclean): Remove stamp-h. From Ronald
2192 F. Guilmette <rfg@monkeys.com>.
2194 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2196 From David Mosberger-Tang <davidm@azstarnet.com>:
2197 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2200 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2202 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2203 (sh_table): Added many SH3 opcodes.
2204 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2206 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2208 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2209 (subco,subco.): Mark this PPC, not PPCCOM.
2211 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2213 * configure: Rebuild with autoconf 2.7.
2215 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2217 * configure: Rebuild with autoconf 2.6.
2219 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2221 * configure.in: Sort list of architectures. Accept but do nothing
2222 for alliant, convex, pyramid, romp, and tahoe.
2224 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2226 * a29k-dis.c (print_special): Change num to unsigned int.
2228 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2230 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2233 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2235 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2236 * configure: Rebuilt.
2238 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2240 * configure.in: Add case for bfd_i860_arch.
2241 * configure: Rebuild.
2243 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2245 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2246 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2247 (NEXTDOUBLE): Likewise.
2248 (print_insn_m68k): Don't match fmoveml if there is more than one
2249 register in the list.
2250 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2252 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2254 * m68k-opc.c: Use #W rather than #w.
2255 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2257 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2259 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2260 and likewise for all the dbxx opcodes.
2262 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2264 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2266 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2268 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2269 the VR4100 specific instructions to the mips_opcodes structure.
2271 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2273 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2274 ugly Metrowerks bug in CW6, is fixed in CW7.
2276 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2278 * ppc-opc.c (whole file): Add flags for common/any support.
2280 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2282 * Makefile.in (BISON): Remove macro.
2283 (FLAGS_TO_PASS): Remove BISON.
2285 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2287 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2289 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2290 instructions that take no args by looking at the match mask.
2291 (print_insn_arg): Always print "%" before register names.
2292 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2293 [case '_']: Don't print "@#" before address.
2294 [case 'J']: Use "%s" as format string, not register name.
2295 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2297 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2299 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2302 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2304 From David Mosberger-Tang <davidm@azstarnet.com>
2306 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2307 (alpha_insn_set): added definitions for VAX floating point
2308 instructions (Unix compilers don't generate these, but handcoded
2309 assembly might still use them).
2311 * alpha-dis.c (print_insn_alpha): added support for disassembling
2312 the miscellaneous instructions in the Alpha instruction set.
2314 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2316 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2317 no longer create sysdep.h, sed ppc-opc.c to work around a
2318 serious Metrowerks C bug.
2319 * mpw-make.in: Remove.
2320 * mpw-make.sed: New file, used by mpw-configure to edit
2321 Makefile.in into an MPW makefile.
2323 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2325 * Makefile.in (maintainer-clean): New synonym for realclean.
2327 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2330 which use '0', '1', and '2' instead. Specify the proper size for
2331 a pmove immediate operand. Correct the pmovefd patterns to be
2332 moves to a register, not from a register.
2333 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2335 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2337 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2338 %psr, %wim, %tbr as F_NOTV9.
2340 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2342 * Makefile.in (Makefile): Just rebuild Makefile when running
2344 (config.h, stamp-h): New targets.
2345 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2346 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2347 rebuilding config.h.
2348 * configure: Rebuild.
2350 * mips-opc.c: Change unaligned loads and stores with "t,A"
2351 operands to use "t,A(b)".
2353 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2355 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2357 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2359 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2360 until 3 instead of until 2.
2362 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2364 * Makefile.in (ALL_CFLAGS): Define.
2365 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2366 (MOSTLYCLEAN): Add config.log.
2367 (distclean): Don't remove config.log.
2368 * configure.in: Substitute HDEFINES.
2369 * configure: Rebuild.
2371 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2373 * sh-opc.h (sh_arg_type): Add F_FR0.
2374 (sh_table, case fmac): Add F_FR0 as first argument.
2376 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2378 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2380 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2382 * sparc-dis.c: Remove all references to NO_V9.
2384 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2386 * aclocal.m4: Just include ../bfd/aclocal.m4.
2387 * configure: Rebuild.
2389 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2391 * sparc-dis.c (X_DISP19): Define.
2392 (print_insn, case 'G'): Use it.
2393 (print_insn, case 'L'): Sign extend displacement.
2395 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2397 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2398 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2399 host_makefile_frag or frags.
2400 * aclocal.m4: New file.
2401 * configure: Rebuild.
2402 * Makefile.in (INSTALL): Set to @INSTALL@.
2403 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2404 (INSTALL_DATA): Set to @INSTALL_DATA@.
2406 (AR_FLAGS): Set to rc rather than qc.
2407 (CC): Define as @CC@.
2408 (CFLAGS): Set to @CFLAGS@.
2409 (@host_makefile_frag@): Remove.
2410 (config.status): Remove dependency upon @frags@.
2412 * configure.in: ../bfd/config.bfd now just sets shell variables.
2413 Use them rather than looking through target Makefile fragments.
2414 * configure: Rebuild.
2416 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2418 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2420 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2422 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2423 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2426 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2427 (lookup_{name,value}): New functions.
2428 (prefetch_table): New static local.
2429 (sparc_{encode,decode}_prefetch): New functions.
2430 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2432 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2434 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2437 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2439 * sh-dis.c: Correct comment on first line of file.
2441 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2443 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2445 * sparc-opc.c (asi, membar): New static locals.
2446 (sparc_{encode,decode}_{asi,membar}): New functions.
2447 (sparc_opcodes, membar insn): Fix.
2448 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2449 Support decoding of membar masks.
2452 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2454 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2456 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2458 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2459 and likewise for the other branches. Add bhs as an alias for bcc,
2460 and likewise for the size variants. Add dbhs as an alias for
2463 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2465 * sh-opc.h (FP sts instructions): Update to match reality.
2467 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2469 * m68k-dis.c: (fpcr_names): Add % before all register names.
2470 (reg_names): Likewise.
2471 (print_insn_arg): Don't explicitly print % before register names.
2472 Add % before register names in static array names. In case 'r',
2473 print data registers as `@(Dn)', not `Dn@'. When printing a
2474 memory address, don't print @# before it.
2475 (print_indexed): Change base_disp and outer_disp from int to
2476 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2477 syntax. Sign extend 8 byte displacement correctly.
2478 (print_base): Print using MIT syntax. Print zpc when appropriate.
2479 Change parameter disp from int to bfd_vma.
2481 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2484 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2486 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2487 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2488 * sh-opc.h (sh_arg_type): Add new operand types.
2489 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2491 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2493 * Makefile.in (distclean): Remove generated file config.h.
2495 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2497 * Makefile.in (distclean): Remove generated file config.h.
2499 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2501 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2503 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2505 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2506 rather than numopcodes. Use m68k_opcodes rather than removed
2507 opcode function. Don't check F_ALIAS.
2508 (print_insn_arg): Change first parameter to be const char *.
2509 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2510 (m68k-opc.o): New target.
2511 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2512 * configure: Rebuild.
2514 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2516 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2517 (opcode_bits, opcode_hash_table): New variables.
2518 (opcodes_initialized): Renamed from opcodes_sorted.
2519 (build_hash_table): New function.
2520 (is_delayed_branch): Use hash table.
2521 (print_insn): Renamed from print_insn_sparc, made static.
2522 Build and use hash table. If !sparc64, ignore sparc64 insns,
2523 and vice-versa if sparc64.
2524 (print_insn_sparc, print_insn_sparc64): New functions.
2525 (compare_opcodes): Move sparc64 opcodes to end.
2526 Print commutative insns with constant second.
2527 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2529 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2531 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2532 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2533 avoids printing a delay slot in a delay slot.
2534 * sh-opc.h (sh_table): Fully bracket last entry.
2536 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2538 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2540 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2542 * configure.in: Get host_makefile_frag from ${srcdir}.
2544 * configure.in: Autoconfiscated. Check for string[s].h. Create
2545 config.h from config.in. Don't set up sysdep.h link.
2546 * sysdep.h: New file.
2547 * configure, config.in: New files, generated from configure.in.
2548 * Makefile.in: Updated to be processed autoconf-style.
2549 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2550 (Makefile): Depend on config.status.
2551 (config.status): New rule.
2552 * configure.bat: Update Makefile substitutions.
2554 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2556 * mips-opc.c (L1): Define.
2557 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2558 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2561 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2563 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2564 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2565 have multiple add units but only a single logical unit.
2567 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2568 shifted by 18, without any insertion or extraction function.
2569 (insert_cr, extract_cr): Remove.
2571 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2573 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2576 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2578 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2579 * sh-opc.h: Add copyright.
2581 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2583 * Makefile.in (crunch-m68k): Delete extra target accidentally
2584 checked in a while ago.
2586 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2588 * sh-opc.h (sh_table): Add SH3 support.
2590 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2592 * sh-opc.h: Added bsrf and braf.
2594 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2596 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2597 bogus [ls]fm{ea,fd} patterns.
2599 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2600 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2601 initialize it from memory. Make function static.
2602 (print_insn_{big,little}_arm): New functions.
2603 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2604 the correct endianness.
2606 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2608 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2611 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2613 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2614 17th, so that it builds again using GCC as the compiler.
2616 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2618 * mips-dis.c (print_insn_little_mips): Cast return value from
2619 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2620 expects an unsigned long, and that might be fewer words of
2621 argument storage (e.g., if bfd_vma is long long on a 32-bit
2623 (print_insn_big_mips): Likewise with bfd_getb32 value.
2624 (_print_insn_mips): Now static.
2626 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2628 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2629 gcc memory hog problem with initializer is fixed.
2631 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2633 Merge in support for Mac MPW as a host.
2634 (Old change descriptions retained for informational value.)
2636 * mpw-config.in (archname): Compute from the config.
2637 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2639 * mpw-config.in (target_arch): Compute from canonical target.
2640 (m68k, mips, powerpc, sparc): Add architectures.
2641 * mpw-make.in (disassemble.c.o): Add.
2642 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2644 * mpw-config.in (BFD_MACHINES): Set to a default value.
2645 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2647 * mpw-make.in (CSEARCH): Add extra-include to search path.
2649 * mpw-config.in (varargs.h): Don't create.
2650 (sysdep.h): Create using forward-include.
2651 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2653 * mpw-config.in: New file, MPW version of configure.in.
2654 * mpw-make.in: New file, MPW version of Makefile.in.
2656 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2658 * alpha-dis.c (print_insn_alpha): Put empty statement after
2661 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2663 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2664 (low_sign_extend): Likewise.
2665 (get_field): Delete unused function.
2666 (set_field, deposit_14, deposit_21): Likewise.
2668 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2670 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2673 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2675 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2677 * alpha-opc.h (OSF_ASMCODE): define
2678 print pal-code names as defined in App C of the
2679 Alpha Architecture Reference Manual
2681 * alpha-dis.c: cleaned up output
2682 print stylized code forms as defined in App A.4.3 of the
2683 Alpha Architecture Reference Manual
2685 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2687 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2689 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2692 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2694 * m68k-dis.c (opcode): New function. Returns address of opcode
2695 table entry given index, even if the opcode table was split to
2696 work around gcc bugs.
2697 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2699 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2700 (reg_names): Now const.
2701 (print_insn_arg): Arrays cacheFieldName and names now const.
2702 (print_indexed): Array scales now const.
2704 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2706 * ppc-opc.c: Sort recently added instructions by minor opcode
2707 number within major opcode number.
2709 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2711 * hppa-dis.c: Include libhppa.h.
2713 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2715 * mips-opc.c: Change dli to use M_DLI, and add dla.
2717 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2719 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2721 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2723 * mips-opc.c: Add r4650 mul instruction.
2725 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2727 * mips-opc.c: Add uld and usd macros for unaligned double load and
2730 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2732 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2733 mfdcr, mtdcr, icbt, iccci.
2735 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2737 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2738 signed char fields to shorts, more portable.
2740 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2742 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2743 char fields as signed chars, since they may have negative values.
2745 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2747 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2748 (mycroft@netbsd.org).
2750 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2752 From "Logg, Ed" <elogg@ea.com>:
2753 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2754 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2757 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2759 * ppc-opc.c: Changes based on patch from David Edelsohn
2760 <edelsohn@mhpcc.edu>.
2761 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2764 (insert_tbr): New static function.
2765 (extract_tbr): New static function.
2766 (XFXFXM_MASK, XFXM): Define.
2767 (XSPRBAT_MASK, XSPRG_MASK): Define.
2768 (powerpc_opcodes): Add instructions to access special registers by
2769 name. Add mtcr and mftbu.
2771 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2773 * mips-opc.c (P3): Define.
2774 (mips_opcodes): Add mad and madu.
2776 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2778 * configure.in: Add W65 support.
2779 * disassemble.c: Likewise.
2780 * w65-opc.h, w65-dis.c: New files.
2782 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2784 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2787 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2789 * mips-opc.c: Add dli as a synonym for li.
2791 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2793 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2794 print something for reserved opcode values, even if it won't
2797 * mips-dis.c (_print_insn_mips): When initializing, shift right
2798 and mask, to avoid sign extension problems on the Alpha.
2800 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2803 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2805 * sh-opc.h (mov.l gbr): Get direction right.
2806 * sh-dis.c (print_insn_shx): New function.
2807 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2808 print opcodes with right byte order.
2810 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2812 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2813 to avoid conflicts with getopt.
2815 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2817 * hppa-dis.c (print_insn_hppa): Read the instruction using
2818 bfd_getb32, so that it works on a little endian or 64 bit host.
2819 Remove unused local variable op.
2821 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2823 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2824 addu does not work correctly if -mips3.
2826 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2828 * a29k-dis.c (print_special): Add special register names defined
2829 on 29030, 29040 and 29050.
2830 (print_insn): Handle new operand type 'I'.
2832 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2834 * Makefile.in (INSTALL): Use top level install.sh script.
2836 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2838 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2839 that it works on a little endian host.
2841 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2843 * configure.in: Use ${config_shell} when running config.bfd.
2845 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2847 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2849 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2851 * a29k-dis.c (print_insn): Print the opcode.
2853 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2855 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2857 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2859 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2861 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2863 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2864 which store a value into memory.
2866 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2868 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2869 * arm-dis.c, arm-opc.h: New files.
2871 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2873 * Makefile.in (ns32k-dis.o): Add dependency.
2874 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2875 string, not as array of chars.
2877 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2879 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2881 * sparc-opc.c: Added sparclite extended FP operations, and
2882 versions of v9 impdep* instructions permitting specification of
2885 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2887 * i960-dis.c (reg_names): Now const.
2888 (struct sparse_tabent): New type, copied from array type in mem
2890 (ctrl): Local static array ctrl_tab now const.
2891 (cobr): Local static array cobr_tab now const.
2892 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2893 static variable mem_tab no longer explicitly initialized. Changed
2894 mem_init to const array of struct sparse_tabent.
2895 (reg): Local static variable reg_tab no longer explicitly
2896 initialized. Changed reg_init to const array of struct
2898 (ea): Local static array scale_tab now const.
2900 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2903 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2905 * configure.bat: the disassember needs to be enabled for
2906 "objdump -d" to work in djgpp.
2908 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2910 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2911 (invalid_float): Enabled general version, doesn't require running
2912 on ns32k host. Changed to take char* argument, and test for
2913 explicitly specified sizes, instead of using sizeof() on host CPU
2915 (INVALID_FLOAT): Cast first argument.
2916 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2917 list_P032, list_M032): Now const.
2918 (optlist, list_search): Made appropriate arguments now point to
2920 (print_insn_arg): Changed static array of one-character-string
2921 pointers into a static const array of characters; fixed sprintf
2922 statement accordingly.
2924 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2926 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2927 from distribution. A ns32k-dis.c from a previous distribution has
2928 been brought up to date and supports the new interface.
2930 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2932 * configure.in: add bfd_ns32k_arch target support.
2934 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2935 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2937 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2939 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2942 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2944 * h8300-dis.c, mips-dis.c: Don't use true and false.
2946 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2948 * configure.in: Change --with-targets to --enable-targets.
2950 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2952 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2953 opcodes to the first instruction with that opcode, to speed
2954 disassembly of large files. From ralphc@pyramid.com (Ralph
2957 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2959 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2961 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2963 * configure.bat: update to latest makefile.in
2965 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2967 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2968 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2969 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2970 slot insn is in a delay slot.
2971 * z8k-opc.h: (resflg): Fix patterns.
2972 * h8500-opc.h Fix CR insn patterns.
2974 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2976 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2977 "cmpl" before POWER versions, so that gas -many uses them.
2979 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2981 * disassemble.c: New file.
2982 * Makefile.in (OFILES): Add disassemble.o.
2983 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2984 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2985 binutils/configure.in.
2987 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2988 opcode being examined.
2990 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2992 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2993 (insert_ral, insert_ram, insert_ras): New functions.
2994 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2995 RAS for store with update.
2997 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2999 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3000 (edelsohn@npac.syr.edu).
3002 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3004 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3007 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3009 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3011 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3013 * ppc-opc.c (powerpc_operands): The signedp field has been
3014 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3015 instead. Add new operand SISIGNOPT.
3016 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3017 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3018 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3021 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3023 * i386-dis.c (struct private): Renamed to dis_private. `private'
3024 is a reserved word for dynix cc.
3026 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3028 * configure.in: Change error message to refer to bfd/config.bfd
3029 rather than bfd/configure.in.
3031 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3033 * ppc-opc.c: Define POWER2 as short alias flag.
3034 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3037 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3039 * i960-dis.c (print_insn_i960): Don't read a second word for
3040 opcodes 0, 1, 2 and 3.
3042 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3044 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3046 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3048 * m68881-ext.c: Removed; no longer used.
3049 * Makefile.in: Changed accordingly.
3051 * m68k-dis.c (ext_format_68881): Don't declare.
3052 (print_insn_m68k): If an instruction uses place 'i', it uses at
3053 least four fixed bytes.
3054 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3055 extended float, convert to double using floatformat_to_double, not
3056 ieee_extended_to_double, and fetch the data before converting it.
3058 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3060 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3061 davidj@ICSI.Berkeley.EDU (David Johnson).
3063 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3066 PowerPC uses bdnz[l][a].
3068 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3070 * dis-buf.c, i386-dis.c: Include sysdep.h.
3072 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3074 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3076 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3077 by Motorola PowerPC 601 with PPC_OPCODE_601.
3078 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3079 Disassemble Motorola PowerPC 601 instructions as well as normal
3080 PowerPC instructions.
3082 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3084 * i960-dis.c (reg, mem): Just use a static array instead of
3087 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3089 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3090 condition name index if this is for a negated condition.
3092 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3093 Floating point format for 'H' operand is backwards from normal
3094 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3095 operands (fmpyadd and fmpysub), handle bizarre register
3096 translation correctly for single precision format.
3098 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3099 or 'I' operands if the next format specifier is 'M' (fcmp
3100 condition completer).
3102 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3104 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3105 single number giving a bitmask for the MB and ME fields of an M
3106 form instruction. Change NB to accept 32, and turn it into 0;
3107 also turn 0 into 32 when disassembling. Seperated SH from NB.
3108 (insert_mbe, extract_mbe): New functions.
3109 (insert_nb, extract_nb): New functions.
3110 (SC_MASK): Mask out SA and LK bits.
3111 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3112 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3113 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3114 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3115 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3116 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3117 (powerpc_macros): Define table of macro definitions.
3118 (powerpc_num_macros): Define.
3120 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3121 if PPC_OPERAND_NEXT is set.
3123 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3126 char. Retrieve contents using bfd_getl32 instead of shifting.
3128 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3130 * ppc-opc.c: New file. Opcode table for PowerPC, including
3131 opcodes for POWER (RS/6000).
3132 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3133 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3134 (CFILES): Add ppc-dis.c.
3135 (ppc-dis.o, ppc-opc.o): New targets.
3136 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3138 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3140 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3141 No space before 'u', 'f', or 'N'.
3143 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3145 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3146 farther than we should.
3148 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3150 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3152 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3154 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3156 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3157 needs it, to prevent reading past the end of a section.
3159 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3161 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3162 Removed t,A case for la; always use t,A(b) case.
3164 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3166 From Ted Lemen <mellon@pepper.ncd.com>
3167 * mips-dis.c (print_insn_arg): Handle 'k'.
3168 * mips-opc.c: Make cache use k, not t.
3170 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3172 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3173 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3174 FLOAT_FORMAT_CODE to put out floating point register names.
3176 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3178 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3180 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3182 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3184 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3187 larger than 32. Moved dsxx32 variants first for disassembler.
3189 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3191 * z8kgen.c, z8k-opc.h: Add full lda information.
3193 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3195 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3196 movb instructions. Any necessary space will be emitted by
3197 the code to handle nullification completers.
3199 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3201 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3203 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3205 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3206 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3208 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3210 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3212 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3214 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3215 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3217 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3219 * m88k-dis.c (m88kdis): comment change. Remove space after
3221 (printop): handle new arg types DEC and XREG for m88110.
3223 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3225 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3226 type for absolute branch addresses. Delete special
3227 "ble" and "be" code in 'W' operand code.
3229 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3231 * mips-opc.c: Set hazard information correctly for branch
3232 likely instructions.
3234 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3236 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3237 info->fprintf_func for printing and info->print_address_func for
3240 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3242 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3244 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3246 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3247 Corrected second case of "b" for disassembler.
3249 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3251 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3252 to BFD swapping routines to correspond to BFD name changes.
3254 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3256 * mips-opc.c: Change div machine instruction to be z,s,t rather
3257 than s,t. Change div macro to be d,v,t rather than d,s,t.
3258 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3259 rem and remu which generates only the corresponding div
3260 instruction. This is for compatibility with the MIPS assembler,
3261 which only generates the simple machine instruction when an
3262 explicit destination of $0 is used.
3263 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3265 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3268 WR_31 hazard for bal, bgezal, bltzal.
3270 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3272 * hppa-dis.c (print_insn_hppa): Use print function
3273 from within the disassemble_info, not fprintf_filtered.
3275 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3277 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3278 Law, law@cs.utah.edu.)
3280 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3282 * mips-opc.c ("absu"): Removed.
3285 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3287 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3288 Changed hazard information to distinguish between memory load
3289 delays and coprocessor load delays.
3291 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3293 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3295 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3297 * configure.in: Don't pass cpu to config.bfd.
3299 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * m88k-dis.c (m88kdis): Make class unsigned.
3303 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3305 * alpha-dis.c (print_insn_alpha): One branch format case was
3306 missing the instruction name.
3308 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3310 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3311 Add the arch-specific auxiliary files.
3312 (OFILES): Remove the arch-specific auxiliary files
3313 and use BFD_MACHINES instead of DIS_LIBS.
3314 * configure.in: Set BFD_MACHINES based on --with-targets option.
3316 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3318 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3321 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3323 * sparc-opc.c: Change CONST to const to deal with gcc
3324 -Dconst=__const -traditional.
3326 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3328 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3329 coprocessor instructions out of #if 0, and made them use new
3332 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3334 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3336 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3338 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3339 instruction, for use by the disassembler.
3341 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3342 hand-coded sign extensions that depended on 32-bit host ints.
3343 FIXME, we still depend on big-endian host bitfield ordering.
3344 (sparc_print_insn): Set the insn_info_valid field, and the
3345 other fields that describe the instruction being printed.
3347 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3349 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3350 `jmp' instead of just one of them.
3352 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3354 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3355 (fput_fp_reg_r): Renamed from fput_reg_r.
3356 (fput_fp_reg): New function.
3357 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3359 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3361 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3363 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3365 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3367 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3368 don't output a space.
3370 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3372 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3374 * mips-opc.c: New file, containing opcode table from
3375 ../include/opcode/mips.h.
3376 * Makefile.in: Add it.
3378 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3380 * m88k-dis.c: New file, moved in from gdb and changed to use the
3381 new dis-asm.h disassembler interface.
3382 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3383 (m88k-dis.o): New target.
3385 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3387 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3388 argument string const char * to correspond to opcode/mips.h.
3390 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3392 * mips-dis.c: Updated to account for name changes in new version
3394 * Makefile.in: Added header file dependencies.
3396 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3398 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3400 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3402 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3403 extend, rather than shifts.
3405 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3407 * Makefile.in: Undo 15 June change.
3409 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3411 * m68k-dis.c (print_insn_arg): Change return value to byte count
3413 * m68k-dis.c: Re-write to detect invalid operands before
3414 printing anything, so we can handle this the same way we
3415 handle invalid opcodes.
3417 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3419 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3421 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3423 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3426 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3428 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3430 * configure.in: Do make sysdep.h link.
3431 * Makefile.in: Search ../include. Don't search ../bfd.
3433 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3435 Changes from Jeff Law, law@cs.utah.edu:
3436 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3437 Do not print a space before the completers specified by
3440 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3442 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3443 defined, since gdb has been fixed.
3445 Changes from Jeff Law, law@cs.utah.edu:
3446 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3447 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3448 be a *disassemble_info, not a *FILE.
3449 * hppa-dis.c: Support 'd', '!', and 'a'.
3450 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3451 * hppa-dis.c: Delete cases which are no longer needed.
3453 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3455 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3457 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3459 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3462 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3464 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3465 * configure.in: No longer need to configure to get sysdep.h.
3467 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3469 * Patches from Jeffrey Law <law@cs.utah.edu>.
3470 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3471 templates for 1.1 FP computational instructions.
3473 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3475 * h8500-dis.c (print_insn_h8500): Address argument is type
3477 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3480 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3481 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3483 * sparc-dis.c (compare_opcodes): Move static declaration to
3486 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3488 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3489 instruction, remove unimp hack from 'l' argument.
3491 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3493 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3496 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3498 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3499 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3502 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3504 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3505 arrays of string pointers to 2-d arrays of chars, to save
3508 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3510 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3511 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3513 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3515 * hppa-dis.c: New file from Utah, adapted to new disassembler
3517 * Makefile.in: Include it.
3519 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3521 * sh-dis.c, sh-opc.h: New files.
3523 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3525 * alpha-dis.c, alpha-opc.h: New files.
3527 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3529 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3532 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3534 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3536 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3538 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3541 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3543 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3544 and double percent signs a few places.
3546 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3548 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3549 Use info->print_address_func not print_address.
3551 * dis-buf.c (generic_print_address): New function.
3553 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3555 * Makefile.in: Add sparc-dis.c.
3556 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3558 Add `add' instruction to the set that get checked
3559 for a preceding `sethi' in order to print an absolute address.
3560 * (print_insn): Disassembly prefers real instructions.
3561 (is_delayed_branch): Speed up.
3562 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3563 Still missing some float ops, and needs testing.
3564 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3565 F_ALIAS. Use printf, not fprintf, when not passing a file
3567 (compare_opcodes): Check that identical instructions have
3568 identical opcodes, complain otherwise.
3571 * Include reg_names.
3573 Use dis-asm.h/read_memory_func interface.
3575 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3577 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3578 deliberately return non-zero to setjmp from longjmp. Otherwise
3579 this code fails to compile.
3581 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3583 * m68k-dis.c: Fix prototype for fetch_arg().
3585 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3587 * dis-buf.c: New file, for new read_memory_func interface.
3588 Makefile.in (OFILES): Include it.
3589 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3590 Use new read_memory_func interface.
3592 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3594 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3595 * h8500-opc.h: Fix couple of opcodes.
3597 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3599 * Makefile.in: add dvi & installcheck targets
3601 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3603 * Makefile.in: Update for h8500-dis.c.
3605 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3607 * h8500-dis.c, h8500-opc.h: New files
3609 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3611 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3612 ../include/dis-asm.h.
3613 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3614 and ../gdb/m68k-pinsn.c).
3615 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3616 and ../gdb/i386-pinsn.c).
3617 * m68881-ext.c: New file. Moved definition of
3618 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3619 * Makefile.in: Adjust for new files.
3620 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3621 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3622 can be dis-assembled.
3624 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3626 * mips-dis.c (print_insn_arg): Now returns void.
3628 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3630 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3631 files that use the macros.
3633 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3635 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3636 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3637 (CFILES): Added mips-dis.c.
3639 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3641 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3642 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3644 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3646 * Makefile.in: Improve *clean rules.
3647 * configure.in: Allow a default host.
3649 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3651 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3652 files include other sysdep files
3654 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3656 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3658 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3660 * configure.in: For host support, use ../bfd/configure.host
3661 so it stays in sync with the ../bfd/hosts database.
3663 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3665 * configure.in: use cpu-vendor-os triple instead of nested cases
3667 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3669 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3670 *always* the wrong one.
3672 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3674 * z8kgen.c: added copyright info
3676 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3678 * z8k-dis.c (unparse_instr): prettier tabs
3679 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3681 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3683 * configure.in: Add ncr* configuration.
3684 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3685 picayune ANSI compilers happy.
3687 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3689 * configure.in (i386): Make i386 and i486 synonymous for now.
3690 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3692 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3694 * Makefile.in (install): Fix typo.
3696 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3698 * Makefile.in (make): Remove obsolete crud.
3699 (sparc-opc.o): Avoid Sun Make VPATH bug.
3701 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3703 * Makefile.in: since there are no SUBDIRS, remove rule and
3704 references of subdir_do.
3706 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3708 * Makefile.in (install): Get the library name right here too.
3709 Don't install bfd.h, since it's unrelated to this library. No
3710 subdirs to recurse into, either.
3711 (CFILES): The source file has a .c suffix, not .o.
3713 * sparc-opc.c: New file, moved from BFD.
3714 * Makefile.in (OFILES): Build it.
3716 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3718 * z8k-dis.c: fixed forward refferences of some declarations.
3720 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3722 * Makefile.in: get the name of the library right
3724 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3726 * z8k-dis.c: knows how to disassemble z8k stuff
3727 * z8k-opc.h: new file full of z8000 opcodes
3731 version-control: never
projects / external / binutils.git / blob