2 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
4 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
7 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
9 * configure: Rebuilt with latest devo autoconf for NT support.
11 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
13 * v850-dis.c (disassemble): Use curly brace syntax for register
16 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
17 where r0 is being used as a destination register.
20 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
22 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
25 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
27 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
29 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
31 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
33 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
38 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
40 * configure (cgen_files): Add support for v850e target.
41 * configure.in (cgen_files): Add support for v850e target.
45 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
47 * configure (cgen_files): Add support for v850eq target.
48 * configure.in (cgen_files): Add support for v850eq target.
51 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
53 * configure.in (bfd_arc_arch): Add.
55 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
56 * Makefile.in: Rebuild.
57 * arc-dis.c, arc-opc.c: New files.
58 * disassemble.c (ARCH_all): Define ARCH_arc.
59 (disassembler): Add ARC support.
62 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
65 * .Sanitize (Do-first): Add support for keep-v850eq command line
68 * v850-dis.c (disassemble): Add support for v850EQ instructions.
70 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
71 (v850_opcodes): Add v850EQ instructions.
74 * .Sanitize (Do-first): Add support for keep-v850e command line
77 * v850-dis.c (disassemble): Add support for v850E instructions.
79 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
80 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
81 insert_spe, extract_spe): New Functions.
82 (v850_opcodes): Add v850E instructions.
85 * v850-opc.c: Reorganised and re-layed out to improve readability
90 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
92 * configure: Rebuild with autoconf 2.12.1.
94 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
96 * aclocal.m4, configure: Rebuild with new automake patches.
98 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
100 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
101 * acinclude.m4: Just include acinclude.m4 from BFD.
102 * aclocal.m4, configure: Rebuild.
104 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
106 * Makefile.am: New file, based on old Makefile.in.
107 * acconfig.h: New file.
108 * acinclude.m4: New file.
109 * stamp-h.in: New file.
110 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
111 Removed shared library handling; now handled by libtool. Replace
112 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
113 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
114 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
115 handling in AC_OUTPUT.
116 * dep-in.sed: Change .o to .lo.
117 * Makefile.in: Now built with automake.
118 * aclocal.m4: Now built with aclocal.
119 * config.in, configure: Rebuild.
121 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
123 * mips-opc.c: Fix typo/thinko in "eret" instruction.
126 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
128 * mips-opc.c: Fix coding of mtsa.
131 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
133 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
135 * sparc-dis.c (sorted_opcodes): New static local.
136 (struct opcode_hash): `opcode' is pointer to const element.
137 (build_hash): First arg is now table of sorted pointers.
138 (print_insn_sparc): Sort opcodes by sorting table of pointers.
139 (compare_opcodes): Update.
141 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
143 * cgen-opc.c: #include <ctype.h>.
144 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
145 Handle case insensitive hashing.
146 (hash_keyword_value): Change type of `value' to unsigned int.
148 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
150 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
151 precision FP, mark it as such. Likewise for double precision
152 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
155 (mips_builtin_opcodes): Remove non-existant r5900 instructions
159 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
161 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
162 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
165 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
167 * ppc-opc.c (extract_nsi): make unsigned expression signed before
169 (UNUSED): remove one level of parens, so MSVC doesn't choke on
170 nesting depth when all the macros are expanded.
172 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
174 * sparc-opc.c: The fcmp v9a instructions take an integer register
175 as a destination, not a floating point register. From Christian
176 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
178 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
180 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
181 syntax. From Roman Hodek
182 <rnhodek@faui22c.informatik.uni-erlangen.de>.
184 * i386-dis.c (twobyte_has_modrm): Fix pand.
186 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
188 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
190 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
192 * arm-dis.c: Add prototypes for arm_decode_shift and
195 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
197 * mips-opc.c: Add r3900 insns.
199 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
201 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
202 print delay slot instructions on the same line. When using a PC
203 relative load, add a comment with the value being loaded if it can
206 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
208 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
209 to pushS/popS for segment regs and byte constant so that
210 pushw/popw printed when in 16 bit data mode.
212 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
213 print cbtw, cwtd in 16 bit data mode.
214 * i386-dis.c (putop): extra case W to support above.
216 * i386-dis.c (print_insn_x86): print addr32 prefix when given
217 address size prefix in 16 bit address mode.
219 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
221 * sh-dis.c: Reindent. Rename local variable fprintf to
224 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
226 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
228 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
230 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
232 * mips16-opc.c (mip16_opcodes): same.
234 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
236 * m68k-opc.c (moveb): Change $d to %d.
238 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
240 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
241 (twobyte_has_modrm): Likewise.
243 (OP_MMX, OP_EM, OP_MS): New static functions.
245 * i386-dis.c: Revert patch of April 4. The output now matches
248 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
250 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
253 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
255 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
257 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
259 * Makefile.in (install): Depend upon installdirs.
260 (installdirs): New target.
262 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
264 From Thomas Graichen <graichen@rzpd.de>:
265 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
266 * configure: Rebuild.
268 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
270 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
271 Delete string{,s}.h support.
273 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
275 * cgen-asm.c (cgen_parse_operand_fn): New global.
276 (cgen_parse_{{,un}signed_integer,address}): Update call to
277 cgen_parse_operand_fn.
278 (cgen_init_parse_operand): New function.
279 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
280 from cgen_asm_init_parse.
281 (m32r_cgen_assemble_insn): New operand `errmsg'.
282 Delete call to as_bad, return error message to caller.
283 (m32r_cgen_asm_hash_keywords): #if 0 out.
285 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
287 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
289 [case 'J']: Fix typo in register name.
291 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
293 * configure.in: Substitute SHLIB_LIBS.
294 * configure: Rebuild.
295 * Makefile.in (SHLIB_LIBS): New variable.
296 ($(SHLIB)): Use $(SHLIB_LIBS).
298 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
300 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
302 * cgen-opc.c (hash_keyword_name): Improve algorithm.
304 * disassemble.c (disassembler): Handle m32r.
306 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
308 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
309 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
310 * Makefile.in (CFILES): Add them.
311 (ALL_MACHINES): Add them.
312 (dependencies): Regenerate.
313 * configure.in (cgen_files): New variable.
314 (bfd_m32r_arch): Add entry.
315 * configure: Regenerate.
317 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
319 * configure.in: Correct file names for bfd_mn10[23]00_arch.
320 * configure: Rebuild.
322 * Makefile.in: Rebuild dependencies.
324 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
326 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
329 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
331 * Branched binutils 2.8.
333 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
335 * m10200-dis.c: Rename from mn10200-dis.c.
336 * m10200-opc.c: Rename from mn10200-opc.c.
337 * m10300-dis.c: Rename from mn10300-dis.c
338 * m10300-opc.c: Rename from mn10300-opc.c.
339 * Makefile.in: Update accordingly.
341 * mips16-opc.c: Add mul and dmul macros.
343 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
345 * makefile.vms: Update CFLAGS, add clean target.
347 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
349 * mips-opc.c: Add "wait". From Ralf Baechle
350 <ralf@gnu.ai.mit.edu>.
352 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
353 * configure, config.in: Rebuild.
354 * sysdep.h: Include <stdlib.h> if it exists.
355 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
357 * Makefile.in: Rebuild dependencies.
359 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
361 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
362 Andrew Bray <andy@madhouse.demon.co.uk>.
364 * mips-opc.c: Add cast when setting mips_opcodes.
367 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
369 * v850-dis.c (disassemble): Fix sign extension problem.
370 * v850-opc.c (extract_d*): Fix sign extension problems to make
371 disassembly calculate branch offsets correctly.
374 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
376 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
378 * mips-opc.c: Add dctr and dctw.
381 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
383 * d30v-dis.c (print_insn): Change the way signed constants
386 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
388 * Makefile.in (BFD_H): New variable.
389 (HFILES): New variable.
390 (CFILES): Add all C files.
391 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
392 Delete old dependencies, and build new ones.
393 * dep-in.sed: New file.
395 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
397 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
399 start-sanitize-coldfire
400 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
402 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
405 end-sanitize-coldfire
406 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
408 * mn10200-opc.c: Change "trap" to "syscall".
409 * mn10300-opc.c: Add new "syscall" instruction.
411 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
413 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
414 mulul insns on the coldfire.
416 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
418 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
419 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
420 (print_insn_little_arm): Likewise.
422 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
424 Based on patches from H.J. Lu <hjl@lucon.org>:
425 * i386-dis.c (fetch_data): Add prototype.
426 * m68k-dis.c (fetch_data): Add prototype.
427 (dummy_print_address): Add prototype. Make static.
428 * ppc-opc.c (valid_bo): Add prototype.
429 * sparc-dis.c (build_hash_table): Add prototype.
430 (is_delayed_branch, compute_arch_mask): Add prototypes.
431 (print_insn_sparc): Make several local variables const.
432 (compare_opcodes): Change arguments to const PTR. Add prototype.
433 * sparc-opc.c (arg): Change name field to be const.
434 (lookup_name, lookup_value): Add prototypes. Change table and
435 name parameters to be const.
436 (sparc_encode_asi): Change name parameter to be const.
437 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
438 (sparc_encode_sparclet_cpreg): Likewise.
439 (sparc_decode_asi): Change return type to be const.
440 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
441 (sparc_decode_sparclet_cpreg): Likewise.
443 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
445 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
446 Solaris doesn't like the combined options, and the -f is
448 (stamp-tshlink, install): Likewise.
450 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
452 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
455 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
457 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
459 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
461 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
464 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
466 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
469 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
471 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
473 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
475 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
478 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
480 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
481 floatformat_to_double to make portable.
482 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
485 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
487 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
488 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
490 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
492 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
493 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
496 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
498 * tic80-opc.c (LSI_SCALED): Renamed from this ...
499 (OFF_SL_BR_SCALED): ... to this, and added the flag
500 TIC80_OPERAND_BASEREL to the flags word.
501 (tic80_opcodes): Replace all occurances of LSI_SCALED with
505 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
507 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
508 Change mips_opcodes from const array to a pointer,
509 and change bfd_mips_num_opcodes from const int to int,
510 so that we can increase the size of the mips opcodes table
514 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
516 * tic80-opc.c (tic80_predefined_symbols): Revert change to
517 store BITNUM values in the table in one's complement form
518 to match behavior when assembler is given a raw numeric
519 value for a BITNUM operand.
520 * tic80-dis.c (print_operand_bitnum): Ditto.
524 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
526 * d30v-opc.c: Removed references to FLAG_X.
529 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
531 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
534 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
536 * Makefile.in: Added d30v object files.
537 * configure: (bfd_d30v_arch) Rebuilt.
538 * configure.in: (bfd_d30v_arch) Added new case.
539 * d30v-dis.c: New file.
540 * d30v-opc.c: New file.
541 * disassemble.c (disassembler) Add entry for d30v.
545 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
547 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
548 representations for the floating point BITNUM values.
550 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
552 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
553 in the table in one's complement form, as they appear in the
555 (tic80_symbol_to_value): Use macros to access predefined
557 (tic80_value_to_symbol): Ditto.
558 (tic80_next_predefined_symbol): New function.
559 * tic80-dis.c (print_operand_bitnum): Remove code that did
560 one's complement for BITNUM values.
564 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
566 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
569 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
571 * makefile.vms: Remove 8 bit characters. Update to latest
574 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
576 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
578 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
580 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
581 (IMM24_PCREL): Likewise.
583 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
585 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
586 address for an extended PC relative instruction that is not a
589 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
591 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
595 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
597 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
598 (tic80_opcodes): Sort entries so that long immediate forms
599 come after short immediate forms, making it easier for
600 assembler to select the right one for a given operand.
603 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
605 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
607 (print_insn_mips16): Likewise.
610 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
612 * mips-opc.c: add r5900.
616 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
618 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
619 a symbol class that restricts translation to just that
620 class (general register, condition code, etc).
622 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
624 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
625 and REG_DEST_E for register operands that have to be
626 an even numbered register. Add REG_FPA for operands that
627 are one of the floating point accumulator registers.
628 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
629 (tic80_opcodes): Change entries that need even numbered
630 register operands to use the new operand table entries.
631 Add "or" entries that are identical to "or.tt" entries.
634 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
636 * mips16-opc.c: Add new cases of exit instruction for
638 * mips-dis.c (print_mips16_insn_arg): Display floating point
639 registers in operands of exit instruction. Print `$' before
640 register names in operands of entry and exit instructions.
643 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
645 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
646 pairs for all predefined symbols recognized by the assembler.
647 Also used by the disassembling routines.
648 (tic80_symbol_to_value): New function.
649 (tic80_value_to_symbol): New function.
650 * tic80-dis.c (print_operand_control_register,
651 print_operand_condition_code, print_operand_bitnum):
652 Remove private tables and use tic80_value_to_symbol function.
655 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
657 * d10v-dis.c (print_operand): Change address printing
658 to correctly handle PC wrapping. Fixes PR11490.
660 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
662 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
665 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
667 * mips-dis.c (print_insn_mips16): Set insn_info information.
668 (print_mips16_insn_arg): Likewise.
670 * mips-dis.c (print_insn_mips16): Better handling of an extend
671 opcode followed by an instruction which can not be extended.
673 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
675 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
676 coldfire moveb instruction to not allow an address register as
677 destination. Although the documentation does not indicate that
678 this is invalid, experiments uncovered unexpected behavior.
679 Added a comment explaining the situation. Thanks to Andreas
680 Schwab for pointing this out to me.
683 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
685 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
686 entries are presorted so that entries with the same mnemonic are
687 adjacent to each other in the table. Sort the entries for each
688 instruction so that this is true.
691 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
693 * m68k-dis.c: Include <libiberty.h>.
694 (print_insn_m68k): Sort the opcode table on the most significant
695 nibble of the opcode.
698 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
700 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
701 "vsub", "vst", "xnor", and "xor" instructions.
702 (V_a1): Renamed from V_a, msb of accumulator reg number.
703 (V_a0): Add macro, lsb of accumulator reg number.
705 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
707 * tic80-dis.c (print_insn_tic80): Broke excessively long
708 function up into several smaller ones and arranged for
709 the instruction printing function to be callable recursively
710 to print vector instructions that have both a load and a
711 math instruction packed into a single opcode.
712 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
713 to explain why it comes after the other vector opcodes.
716 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
718 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
719 move insns to handle immediate operands.
721 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
723 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
724 fix operand mask in the "moveml" entries for the coldfire.
727 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
729 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
730 New macros for building vector instruction opcodes.
731 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
732 FMT_LI, which were unused. The field is now a flags field.
733 Remove some opcodes that are possible, but illegal, such
734 as long immediate instructions with doubles for immediate
735 values. Add "vadd" and "vld" instructions.
737 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
739 * tic80-opc.c (tic80_operands): Reorder some table entries to make
740 the order more logical. Move the shift alias instructions ("rotl",
741 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
742 interspersed with the regular sr.x and sl.x instructions. Add
743 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
744 "sub", "subu", "swcr", and "trap".
746 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
748 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
749 (OFF_SL_PC): Renamed from OFF_SL.
750 (OFF_SS_BR): New operand type for base relative operand.
751 (OFF_SL_BR): New operand type for base relative operand.
752 (REG_BASE): New operand type for base register operand.
753 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
754 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
755 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
757 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
758 10 char field, padded with spaces on rhs, rather than a string
759 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
760 than old TIC80_OPERAND_RELATIVE. Add support for new
761 TIC80_OPERAND_BASEREL flag bit.
763 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
765 * tic80-dis.c (print_insn_tic80): Print floating point operands
767 * tic80-opc.c (SPFI): Add single precision floating point
768 immediate operand type.
769 (ROTATE): Add rotate operand type for shifts.
770 (ENDMASK): Add for shifts.
771 (n): Macro for the 'n' bit.
772 (i): Macro for the 'i' bit.
773 (PD): Macro for the 'PD' field.
774 (P2): Macro for the 'P2' field.
775 (P1): Macro for the 'P1' field.
776 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
780 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
782 * mn10200-dis.c (disassemble): Mask off unwanted bits after
783 adding in current address for pc-relative operands.
786 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
788 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
789 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
790 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
791 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
792 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
793 REG_BASE_M_SI, REG_BASE_M_LI respectively.
794 (REG_SCALED, LSI_SCALED): New operand types.
795 (E): New macro for 'E' bit at bit 27.
796 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
797 opcodes, including the various size flavors (b,h,w,d) for
798 the direct load and store instructions.
800 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
802 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
804 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
805 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
806 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
807 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
808 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
809 masks with "MASK_* & ~M_*" to get the M bit reset.
810 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
812 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
814 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
815 correctly. Add support for printing TIC80_OPERAND_BITNUM and
816 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
818 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
819 CC, SICR, and LICR table entries.
820 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
821 "bcnd", and "brcr" opcodes.
824 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
826 * ppc-opc.c (powerpc_operands): Make comment match the
827 actual fields (no shift field).
828 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
830 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
831 partial implementation, work in progress.
832 * tic80-opc.c (tic80_operands): Begin construction operands table.
833 (tic80_opcodes): Continue populating opcodes table and start
834 filling in the operand indices.
835 (tic80_num_opcodes): Add this.
838 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
840 * m68k-opc.c: Add #B case for moveq.
842 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
844 * mn10300-dis.c (disassemble): Make sure all variables are initialized
845 before they are used.
848 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
850 * v850-opc.c (v850_opcodes): Put curly-braces around operands
851 for "breakpoint" instruction.
854 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
856 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
857 (dep): Use ALL_CFLAGS rather than CFLAGS.
860 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
862 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
866 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
868 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
870 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
873 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
875 * mips16-opc.c: Add "abs".
878 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
880 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
881 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
882 (disassembler): Add bfd_arch_tic80 support to set disassemble
884 * tic80-dis.c (print_insn_tic80): Add stub.
886 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
888 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
889 * configure: Regenerate with autoconf.
890 * tic80-dis.c: Add file.
891 * tic80-opc.c: Add file.
894 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
896 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
898 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
900 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
901 (mn10200_opcodes): Use it for some logicals and btst insns.
902 Add "break" and "trap" instructions.
904 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
906 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
908 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
910 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
911 relative load or add now depends upon whether the instruction is
914 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
916 * mn10200-dis.c: Finish writing disassembler.
917 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
918 Fix mask for "jmp (an)".
920 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
921 handle endianness issues for mn10300.
923 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
925 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
927 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
928 instruction. Fix opcode field for "movb (imm24),dn".
930 * mn10200-opc.c (mn10200_operands): Fix insertion position
933 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
935 * mn10200-opc.c: Create mn10200 opcode table.
936 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
937 but moving along nicely.
939 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
941 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
943 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
945 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
946 specifiers for fmovem* instructions.
948 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
950 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
952 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
954 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
957 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
959 * mn10300-opc.c: Add some comments explaining the various
962 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
964 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
966 * m68k-dis.c (print_insn_arg): Handle new < and > operand
969 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
970 operand specifiers in fmovm* instructions.
972 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
974 * ppc-opc.c (insert_li): Give an error if the offset has the two
975 least significant bits set.
977 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
979 * mips-dis.c (print_insn_mips16): Separate the instruction from
980 the arguments with a tab, not a space.
982 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
984 * mn10300-dis.c (disasemble): Finish conversion to '$' as
987 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
990 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
992 * configure: Rebuild with autoconf 2.12.
994 Add support for mips16 (16 bit MIPS implementation):
995 * mips16-opc.c: New file.
996 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
997 (mips16_reg_names): New static array.
998 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
999 after seeing a 16 bit symbol.
1000 (print_insn_little_mips): Likewise.
1001 (print_insn_mips16): New static function.
1002 (print_mips16_insn_arg): New static function.
1003 * mips-opc.c: Add jalx instruction.
1004 * Makefile.in (mips16-opc.o): New target.
1005 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1006 * configure: Rebuild.
1008 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1010 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1011 operand specifiers in *save, *restore and movem* instructions.
1013 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1016 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1017 register operands for immediate arithmetic, not, neg, negx, and
1018 set according to condition instructions.
1020 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1021 specifier of the effective-address operand in immediate forms of
1022 arithmetic instructions. The specifier for the immediate operand
1023 notes how and where the constant will be stored.
1025 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1027 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1030 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1033 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1035 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1037 * mn10300-dis.c (disassemble): Handle register lists.
1039 * mn10300-opc.c: Fix handling of register list operand for
1040 "call", "ret", and "rets" instructions.
1042 * mn10300-dis.c (disassemble): Print PC-relative and memory
1043 addresses symbolically if possible.
1044 * mn10300-opc.c: Distinguish between absolute memory addresses,
1045 pc-relative offsets & random immediates.
1047 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1049 (disassemble): Handle SPLIT and EXTENDED operands.
1051 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1053 * mn10300-dis.c: Rough cut at printing some operands.
1055 * mn10300-dis.c: Start working on disassembler support.
1056 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1058 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1060 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1062 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1064 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1066 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1068 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1069 register argument is calls and jmp instructions.
1071 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1073 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1074 getx operand. Fix opcode for mulqu imm,dn.
1076 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1078 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1079 in MN10300_OPERAND_SPLIT operands for how many bits
1080 appear in the basic insn word. Add IMM32_HIGH24,
1081 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1082 (mn10300_opcodes): Use new operands as needed.
1084 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1085 for bset, bclr, btst instructions.
1086 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1088 * mn10300-opc.c (mn10300_operands): Remove many redundant
1089 operands. Update opcode table as appropriate.
1090 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1091 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1093 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1095 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1096 operands (for indexed load/stores). Fix bitpos for DI
1097 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1098 few instructions that insert immediates/displacements in the
1099 middle of the instruction. Add IMM8E for 8 bit immediate in
1100 the extended part of an instruction.
1101 (mn10300_operands): Use new opcodes as appropriate.
1103 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1105 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1106 sequential so the assembler never parallelizes it with
1109 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1111 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1112 a data/address register that appears in register field 0
1113 and register field 1.
1114 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1116 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1118 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1119 standard disassembly.
1121 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1122 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1123 Recategorize PALcode instructions.
1126 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1128 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1131 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1133 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1134 there are no operand types.
1137 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1139 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1141 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1144 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1146 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1149 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1151 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1152 and sst.w instructions.
1154 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1158 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1160 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1163 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1165 * ppc-opc.c (PPCPWR2): Define.
1166 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1169 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1171 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1172 field for movhu instruction.
1175 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1176 cast value to "long" not "signed long" to keep hpux10
1180 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1182 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1185 * mn10300-opc.c (FMT*): Remove definitions.
1187 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1188 for shift-by-register opcodes.
1190 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1191 into [AD][MN][01] for encoding the position of the register
1194 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1196 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1197 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1199 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1201 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1202 Fix various typos. Add "PAREN" operand.
1203 (MEM, MEM2): Define.
1204 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1205 operands. Fix several typos.
1207 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1210 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1212 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1213 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1215 (mn10300_opcodes): Break opcode format out into its own field.
1216 Update many operand fields to deal with signed vs unsigned
1217 issues. Fix one or two typos in the "mov" instruction
1218 opcode, mask and/or operand fields.
1220 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1222 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1223 m68851 wasn't reset.
1225 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1227 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1228 all opcodes. Very rough cut at operands for all opcodes.
1230 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1233 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1235 * mn10200-opc.c, mn10300-opc.c: New files.
1236 * mn10200-dis.c, mn10300-dis.c: New files.
1237 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1238 * disassemble.c: Break mn10x00 support into 10200 and 10300
1240 * configure.in: Likewise.
1241 * configure: Rebuilt.
1243 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1245 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1247 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1249 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1251 * disassemble (ARCH_mn10x00): Define.
1252 (disassembler): Handle bfd_arch_mn10x00.
1253 * configure.in: Recognize bfd_mn10x00_arch.
1254 * configure: Rebuilt.
1256 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1258 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1259 accordingly. Don't declare functions using op_rtn.
1262 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1264 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1265 params to be more standard.
1266 * (disassemble): Print absolute addresses and symbolic names for
1267 branch and jump targets.
1268 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1270 * (v850_opcodes): Add breakpoint insn.
1273 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1275 * m68k-opc.c: Move the fmovemx data register cases before the
1276 other cases, so that they get recognized before the data register
1277 does gets treated as a degenerate register list.
1279 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1281 * mips-opc.c: Add a case for "div" and "divu" with two registers
1282 and a destination of $0.
1284 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1286 * mips-dis.c (print_insn_arg): Add prototype.
1287 (_print_insn_mips): Ditto.
1289 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1291 * mips-dis.c (print_insn_arg): Print condition code registers as
1294 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1296 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1299 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1301 * v850-dis.c (disassemble): Make static. Provide prototype.
1303 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1305 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1308 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1310 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1311 ']' characters into the output stream.
1312 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1313 Add "memop" field to all opcodes (for the disassembler).
1314 Reorder opcodes so that "nop" comes before "mov" and "jr"
1315 comes before "jarl".
1317 * v850-dis.c (print_insn_v850): Fix typo in last change.
1319 * v850-dis.c (print_insn_v850): Properly handle disassembling
1320 a two byte insn at the end of a memory region when the memory
1321 region's size is only two byte aligned.
1323 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1325 * v850-dis.c (v850_reg_names): Define.
1326 (v850_sreg_names, v850_cc_names): Likewise.
1327 (disassemble): Very rough cut at printing operands (unformatted).
1329 * v850-opc.c (BOP_MASK): Fix.
1330 (v850_opcodes): Fix mask for jarl and jr.
1332 * v850-dis.c: New file. Skeleton for disassembler support.
1333 * Makefile.in Remove v850 references, they're not needed here
1334 and they weren't being sanitized away.
1335 * configure.in: Add v850-dis.o when building v850 toolchains.
1336 * configure: Rebuilt.
1337 * disassemble.c (disassembler): Call v850 disassembler.
1339 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1340 (insert_d8_6, extract_d8_6): New functions.
1341 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1342 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1344 (IF4A, IF4B): Use "D7" instead of "D7S".
1345 (IF4C, IF4D): Use "D8_7" instead of "D8".
1346 (IF4E, IF4F): New. Use "D8_6".
1347 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1348 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1350 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1351 (v850_operands): Change D16 to D16_15, use special insert/extract
1352 routines. New new D16 that uses the generic insert/extract code.
1353 (IF7A, IF7B): Use D16_15.
1354 (IF7C, IF7D): New. Use D16.
1355 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1357 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1358 message. Issue an error if the branch offset is odd.
1360 * v850-opc.c: Add notes about needing special insert/extract
1361 for all the load/store insns, except "ld.b" and "st.b".
1363 * v850-opc.c (insert_d22, extract_d22): New functions.
1364 (v850_operands): Use insert_d22 and extract_d22 for
1366 (insert_d9): Fix range check.
1368 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1370 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1371 and set bits field to D9 and D22 operands.
1373 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1375 * v850-opc.c (v850_operands): Define SR2 operand.
1376 (v850_opcodes): "ldsr" uses R1,SR2.
1378 * v850-opc.c (v850_opcodes): Fix opcode specs for
1379 sld.w, sst.b, sst.h, sst.w, and nop.
1381 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1383 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1384 end of the opcode table.
1387 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1389 * d10v-opc.c (pre_defined_registers): Added register pairs,
1390 "r0-r1", "r2-r3", etc.
1393 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1395 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1396 Create I16U for an unsigned 16bit mmediate operand.
1397 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1399 * v850-opc.c (v850_operands): Define EP operand.
1400 (IF4A, IF4B, IF4C, IF4D): Use EP.
1402 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1403 with immediate operand, "movhi". Tweak "ldsr".
1405 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1406 correct. Get sld.[bhw] and sst.[bhw] closer.
1408 * v850-opc.c (v850_operands): "not" is a two byte insn
1410 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1412 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1414 * v850-opc.c (two): Get order of words correct.
1416 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1418 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1419 register source and destination operands.
1420 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1422 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1423 same thinko in "trap" opcode.
1425 * v850-opc.c (v850_opcodes): Add initializer for size field
1428 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1429 Add D8 for 8-bit unsigned field in short load/store insns.
1430 (IF4A, IF4D): These both need two registers.
1431 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1432 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1433 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1434 for "ldsr" and "stsr".
1435 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1438 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1439 short store word (sst.w).
1441 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1443 * v850-opc.c (v850_operands): Added insert and extract fields,
1444 pointers to functions that handle unusual operand encodings.
1446 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1448 * v850-opc.c (v850_opcodes): Enable "trap".
1450 * v850-opc.c (v850_opcodes): Fix order of displacement
1451 and register for "set1", "clr1", "not1", and "tst1".
1453 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1455 * v850-opc.c (v850_operands): Add "B3" support.
1456 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1459 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1461 * v850-opc.c: Close unterminated comment.
1463 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1465 * v850-opc.c (v850_operands): Add flags field.
1466 (v850_opcodes): add move opcodes.
1468 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1470 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1471 * configure: (bfd_v850v_arch) Add new case.
1472 * configure.in: (bfd_v850_arch) Add new case.
1473 * v850-opc.c: New file.
1476 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1478 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1480 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1482 * d10v-opc.c: Add additional information to the opcode
1483 table to help determinine which instructions can be done
1486 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1488 * mpw-make.sed: Update editing of include pathnames to be
1491 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1493 * arm-opc.h: Added "bx" instruction definition.
1495 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1497 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1499 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1501 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1503 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1505 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1507 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1509 * makefile.vms: Update for alpha-opc changes.
1511 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1513 * i386-dis.c (print_insn_i386): Actually return the correct value.
1514 (ONE, OP_ONE): #ifdef out; not used.
1516 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1518 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1519 Changed subi operand type to treat 0 as 16.
1521 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1523 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1526 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1528 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1529 memory transfer instructions. Add new format string entries %h and %s.
1530 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1533 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1535 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1536 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1538 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1540 * alpha-dis.c (print_insn_alpha_osf): Remove.
1541 (print_insn_alpha_vms): Remove.
1542 (print_insn_alpha): Make globally visible. Chose the register
1543 names based on info->flavour.
1544 * disassemble.c: Always return print_insn_alpha for the alpha.
1546 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1548 * d10v-dis.c (dis_long): Handle unknown opcodes.
1550 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1552 * d10v-opc.c: Changes to support signed and unsigned numbers.
1553 All instructions with the same name that have long and short forms
1554 now end in ".l" or ".s". Divs added.
1555 * d10v-dis.c: Changes to support signed and unsigned numbers.
1557 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1559 * d10v-dis.c: Change all functions to use info->print_address_func.
1561 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1563 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1564 move ccr/sr insns more strict so that the disassembler only
1565 selects them when the addressing mode is data register.
1567 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1568 * d10v-opc.c (pre_defined_registers): Declare.
1569 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1570 to pick a better name for the registers.
1572 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1574 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1575 operands for fexpand and fpmerge. From Christian Kuehnke
1576 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1578 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1580 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1581 print routine. Take new regnames and cpumask arguments.
1582 Kill the environment variable nonsense.
1583 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1584 (print_insn_alpha_vms): New function. Do VMS style regnames.
1585 * disassemble.c (disassembler): Test bfd flavour to pick
1586 between OSF and VMS routines. Default to OSF.
1588 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1590 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1591 * configure: Rebuild.
1592 * Makefile.in (install): Use @INSTALL_SHLIB@.
1594 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1596 * configure: (bfd_d10v_arch) Add new case.
1597 * configure.in: (bfd_d10v_arch) Add new case.
1598 * d10v-dis.c: New file.
1599 * d10v-opc.c: New file.
1600 * disassemble.c (disassembler) Add entry for d10v.
1602 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1604 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1605 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1607 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1609 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1610 distinguish between variants of the instruction set.
1611 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1612 distinguish between variants of the instruction set.
1614 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1616 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1617 the 8086 instruction set.
1618 * i386-dis.c: General cleanups. Make most things static. Add
1619 prototypes. Get rid of static variables aflags and dflags. Pass
1620 them as args (to almost everything).
1622 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1624 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1626 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1628 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1629 if the next arg is marked with SRC_IN_DST. Gross.
1631 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1632 we're looking for and find EXR.
1634 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1635 if we're looking for KBIT and we don't find it.
1637 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1640 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1641 3bit immediate operands.
1643 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1645 * Released binutils 2.7.
1647 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1648 <kkaempf@progis.ac-net.de>.
1650 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1652 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1654 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1656 * sparc-dis.c (print_insn_sparclite): New routine to print
1657 sparclite instructions.
1659 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1661 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1663 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1665 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1666 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1667 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1669 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1671 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1672 Use autoconf-set values.
1673 (docdir, oldincludedir): Removed.
1674 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1676 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1678 * alpha-opc.c: New file.
1679 * alpha-opc.h: Remove.
1680 * alpha-dis.c: Complete rewrite to use new opcode table.
1681 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1682 * configure: Rebuild with autoconf 2.10.
1683 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1684 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1686 (alpha-opc.o): New target.
1688 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1690 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1691 Set imm_added_to_rs1 even if the source and destination register
1694 * sparc-opc.c: Add some two operand forms of the wr instruction.
1696 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1698 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1701 * disassemble.c (disassembler): Handle H8/S.
1702 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1704 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1706 * sparc-opc.c: Add beq/teq as aliases for be/te.
1708 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1709 <sergei@msil.sps.mot.com>.
1711 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1713 * makefile.vms: New file.
1715 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1717 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1719 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1722 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1724 * i386-dis.c (OP_OFF): Call append_prefix.
1726 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1728 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1729 unsigned long to silence a warning from the Solaris PowerPC
1732 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1734 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1736 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1738 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1740 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1741 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1742 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1743 cpush, cpusha, cpull sparclet insns.
1745 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1747 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1749 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1751 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1752 Set F_FLOAT on other floating point instructions.
1754 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1756 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1758 (powerpc_opcodes): Add 860/821 specific SPRs.
1760 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1762 * configure.in: Permit --enable-shared to specify a list of
1763 directories. Set and substitute BFD_PICLIST.
1764 * configure: Rebuild.
1765 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1766 uses. Set to @BFD_PICLIST@.
1768 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1770 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1771 not "abs", which may be needed for the absolute in something
1772 like btst #0,@10:8. Print L_3 immediates separately from other
1773 immediates. Change ABSMOV reference to ABS8MEM.
1775 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1777 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1778 (current_arch_mask): New static global.
1779 (compute_arch_mask): New static function.
1780 (print_insn_sparc): Delete sparc_v9_p. New static local
1781 current_mach. Resort opcode table if current_mach changes.
1782 Generalize "insn not supported" test.
1783 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1784 Delete test for v9/!v9.
1785 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1787 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1788 (brfcx): Renamed to FBRX.
1789 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1790 coprocessor mnemonics are not supported on the sparclet).
1791 (condf): Renamed to CONDF.
1792 (SLCBCC2): Delete F_ALIAS flag.
1794 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1796 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1797 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1799 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1801 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1802 that the shared library version number is set correctly.
1804 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1806 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1807 Miles Bader <miles@gnu.ai.mit.edu>.
1808 * configure: Rebuild.
1810 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1812 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1815 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1817 * configure: Rebuild with autoconf 2.8.
1819 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1821 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1822 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1824 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1826 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1827 since they appear as targets in Makefile.in.
1828 * configure: Rebuild.
1830 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1832 * mpw-make.sed: Edit out shared library support bits.
1834 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1836 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1837 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1838 (sparc_opcodes): Add sparclet insns.
1839 (sparclet_cpreg_table): New static local.
1840 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1841 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1843 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1845 * i386-dis.c (index16): New static variable.
1846 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1848 (OP_indirE): Return result of OP_E.
1849 (OP_E): Check for 16 bit addressing mode, and disassemble
1850 correctly. Optimised 32 bit case a little. Don't print
1851 "(base,index,scale)" when sib specifies only an offset.
1853 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1855 * configure.in: Set and substitute SHLIB_DEP.
1856 * configure: Rebuild.
1857 * Makefile.in (SHLIB_DEP): New variable.
1858 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1859 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1860 COMMON_SHLIB, add them to piclist with appropriate modifications.
1861 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1862 here: just use piclist.
1864 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1866 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1867 (print_insn_sparc): Rewrite v9/not-v9 tests.
1868 (compare_opcodes): Likewise.
1869 * sparc-opc.c (MASK_<ARCH>): Define.
1870 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1871 (sparclet,v6notv9): Define.
1872 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1873 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1875 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1877 * configure.in: Call AC_PROG_CC before configure.host.
1878 * configure: Rebuild.
1880 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1882 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1884 * i386-dis.c (onebyte_has_modrm): New static array.
1885 (twobyte_has_modrm): New static array.
1886 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1888 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1890 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1893 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1895 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1898 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1900 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1901 m68010up, not just m68020up | cpu32.
1903 * Makefile.in (SONAME): New variable.
1904 ($(SHLINK)): Make a link to the transformed name, as well.
1905 (stamp-tshlink): New target.
1906 (install): Skip stamp-tshlink during install.
1908 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1910 * configure.in: Call AC_ARG_PROGRAM.
1911 * configure: Rebuild.
1912 * Makefile.in (program_transform_name): New variable.
1913 (install): Transform library name before installing it.
1915 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1917 * i960-dis.c (mem): Add HX dcinva instruction.
1919 Support for building as a shared library, based on patches from
1920 Alan Modra <alan@spri.levels.unisa.edu.au>:
1921 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1922 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1923 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1924 * configure: Rebuild.
1925 * Makefile.in (ALLLIBS): New variable.
1926 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1927 (COMMON_SHLIB, SHLINK): New variables.
1928 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1929 (STAGESTUFF): Remove variable.
1930 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1931 (stamp-piclist, piclist): New targets.
1932 ($(SHLIB), $(SHLINK)): New targets.
1933 ($(OFILES)): Depend upon stamp-picdir.
1934 (disassemble.o): Build twice if PICFLAG is set.
1935 (MOSTLYCLEAN): Add pic/*.o.
1936 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1937 (distclean): Remove pic and stamp-picdir.
1938 (install): Install shared libraries.
1939 (stamp-picdir): New target.
1941 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1943 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1944 Print unknown instruction as "unknown", rather than in hex.
1946 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1948 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1950 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1952 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1954 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1956 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1957 when necessary. From Ulrich Drepper
1958 <drepper@myware.rz.uni-karlsruhe.de>.
1960 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1962 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1963 sparc_num_opcodes. Update architecture enum values.
1964 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1965 (sparc_opcode_lookup_arch): New function.
1966 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1967 (sparc_opcodes): Add v9a shutdown insn.
1969 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1971 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1972 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1974 (print_insn_sparc64): Deleted.
1975 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1978 * sparc-opc.c (architecture_pname): Add v9a.
1980 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1982 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1983 incorrectly defined as 0x16 when it should be 0x15.
1984 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1985 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1986 excb (exception barrier) which is defined in the Alpha
1987 Architecture Handbook version 2.
1988 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1989 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1990 disassembled as or, for example.
1992 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1994 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1995 (_print_insn_mips): Change i from int to unsigned int.
1997 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1999 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2000 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2002 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2004 * i386-dis.c: Added Pentium Pro instructions.
2006 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2008 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2011 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2013 * sh-opc.h (sh_nibble_type): Added REG_B.
2014 (sh_arg_type): Added A_REG_B.
2015 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2017 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2019 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2021 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2023 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2025 * Makefile.in (distclean): Remove stamp-h. From Ronald
2026 F. Guilmette <rfg@monkeys.com>.
2028 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2030 From David Mosberger-Tang <davidm@azstarnet.com>:
2031 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2034 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2036 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2037 (sh_table): Added many SH3 opcodes.
2038 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2040 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2042 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2043 (subco,subco.): Mark this PPC, not PPCCOM.
2045 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2047 * configure: Rebuild with autoconf 2.7.
2049 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2051 * configure: Rebuild with autoconf 2.6.
2053 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2055 * configure.in: Sort list of architectures. Accept but do nothing
2056 for alliant, convex, pyramid, romp, and tahoe.
2058 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2060 * a29k-dis.c (print_special): Change num to unsigned int.
2062 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2064 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2067 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2069 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2070 * configure: Rebuilt.
2072 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2074 * configure.in: Add case for bfd_i860_arch.
2075 * configure: Rebuild.
2077 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2079 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2080 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2081 (NEXTDOUBLE): Likewise.
2082 (print_insn_m68k): Don't match fmoveml if there is more than one
2083 register in the list.
2084 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2086 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2088 * m68k-opc.c: Use #W rather than #w.
2089 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2091 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2093 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2094 and likewise for all the dbxx opcodes.
2096 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2098 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2100 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2102 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2103 the VR4100 specific instructions to the mips_opcodes structure.
2105 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2107 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2108 ugly Metrowerks bug in CW6, is fixed in CW7.
2110 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2112 * ppc-opc.c (whole file): Add flags for common/any support.
2114 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2116 * Makefile.in (BISON): Remove macro.
2117 (FLAGS_TO_PASS): Remove BISON.
2119 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2121 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2123 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2124 instructions that take no args by looking at the match mask.
2125 (print_insn_arg): Always print "%" before register names.
2126 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2127 [case '_']: Don't print "@#" before address.
2128 [case 'J']: Use "%s" as format string, not register name.
2129 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2131 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2133 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2136 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2138 From David Mosberger-Tang <davidm@azstarnet.com>
2140 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2141 (alpha_insn_set): added definitions for VAX floating point
2142 instructions (Unix compilers don't generate these, but handcoded
2143 assembly might still use them).
2145 * alpha-dis.c (print_insn_alpha): added support for disassembling
2146 the miscellaneous instructions in the Alpha instruction set.
2148 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2150 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2151 no longer create sysdep.h, sed ppc-opc.c to work around a
2152 serious Metrowerks C bug.
2153 * mpw-make.in: Remove.
2154 * mpw-make.sed: New file, used by mpw-configure to edit
2155 Makefile.in into an MPW makefile.
2157 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2159 * Makefile.in (maintainer-clean): New synonym for realclean.
2161 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2163 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2164 which use '0', '1', and '2' instead. Specify the proper size for
2165 a pmove immediate operand. Correct the pmovefd patterns to be
2166 moves to a register, not from a register.
2167 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2169 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2171 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2172 %psr, %wim, %tbr as F_NOTV9.
2174 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2176 * Makefile.in (Makefile): Just rebuild Makefile when running
2178 (config.h, stamp-h): New targets.
2179 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2180 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2181 rebuilding config.h.
2182 * configure: Rebuild.
2184 * mips-opc.c: Change unaligned loads and stores with "t,A"
2185 operands to use "t,A(b)".
2187 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2189 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2191 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2193 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2194 until 3 instead of until 2.
2196 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2198 * Makefile.in (ALL_CFLAGS): Define.
2199 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2200 (MOSTLYCLEAN): Add config.log.
2201 (distclean): Don't remove config.log.
2202 * configure.in: Substitute HDEFINES.
2203 * configure: Rebuild.
2205 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2207 * sh-opc.h (sh_arg_type): Add F_FR0.
2208 (sh_table, case fmac): Add F_FR0 as first argument.
2210 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2212 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2214 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2216 * sparc-dis.c: Remove all references to NO_V9.
2218 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2220 * aclocal.m4: Just include ../bfd/aclocal.m4.
2221 * configure: Rebuild.
2223 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2225 * sparc-dis.c (X_DISP19): Define.
2226 (print_insn, case 'G'): Use it.
2227 (print_insn, case 'L'): Sign extend displacement.
2229 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2231 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2232 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2233 host_makefile_frag or frags.
2234 * aclocal.m4: New file.
2235 * configure: Rebuild.
2236 * Makefile.in (INSTALL): Set to @INSTALL@.
2237 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2238 (INSTALL_DATA): Set to @INSTALL_DATA@.
2240 (AR_FLAGS): Set to rc rather than qc.
2241 (CC): Define as @CC@.
2242 (CFLAGS): Set to @CFLAGS@.
2243 (@host_makefile_frag@): Remove.
2244 (config.status): Remove dependency upon @frags@.
2246 * configure.in: ../bfd/config.bfd now just sets shell variables.
2247 Use them rather than looking through target Makefile fragments.
2248 * configure: Rebuild.
2250 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2252 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2254 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2256 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2257 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2260 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2261 (lookup_{name,value}): New functions.
2262 (prefetch_table): New static local.
2263 (sparc_{encode,decode}_prefetch): New functions.
2264 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2266 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2268 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2271 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2273 * sh-dis.c: Correct comment on first line of file.
2275 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2277 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2279 * sparc-opc.c (asi, membar): New static locals.
2280 (sparc_{encode,decode}_{asi,membar}): New functions.
2281 (sparc_opcodes, membar insn): Fix.
2282 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2283 Support decoding of membar masks.
2286 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2288 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2290 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2292 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2293 and likewise for the other branches. Add bhs as an alias for bcc,
2294 and likewise for the size variants. Add dbhs as an alias for
2297 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2299 * sh-opc.h (FP sts instructions): Update to match reality.
2301 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2303 * m68k-dis.c: (fpcr_names): Add % before all register names.
2304 (reg_names): Likewise.
2305 (print_insn_arg): Don't explicitly print % before register names.
2306 Add % before register names in static array names. In case 'r',
2307 print data registers as `@(Dn)', not `Dn@'. When printing a
2308 memory address, don't print @# before it.
2309 (print_indexed): Change base_disp and outer_disp from int to
2310 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2311 syntax. Sign extend 8 byte displacement correctly.
2312 (print_base): Print using MIT syntax. Print zpc when appropriate.
2313 Change parameter disp from int to bfd_vma.
2315 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2318 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2320 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2321 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2322 * sh-opc.h (sh_arg_type): Add new operand types.
2323 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2325 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2327 * Makefile.in (distclean): Remove generated file config.h.
2329 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2331 * Makefile.in (distclean): Remove generated file config.h.
2333 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2335 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2337 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2339 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2340 rather than numopcodes. Use m68k_opcodes rather than removed
2341 opcode function. Don't check F_ALIAS.
2342 (print_insn_arg): Change first parameter to be const char *.
2343 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2344 (m68k-opc.o): New target.
2345 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2346 * configure: Rebuild.
2348 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2350 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2351 (opcode_bits, opcode_hash_table): New variables.
2352 (opcodes_initialized): Renamed from opcodes_sorted.
2353 (build_hash_table): New function.
2354 (is_delayed_branch): Use hash table.
2355 (print_insn): Renamed from print_insn_sparc, made static.
2356 Build and use hash table. If !sparc64, ignore sparc64 insns,
2357 and vice-versa if sparc64.
2358 (print_insn_sparc, print_insn_sparc64): New functions.
2359 (compare_opcodes): Move sparc64 opcodes to end.
2360 Print commutative insns with constant second.
2361 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2363 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2365 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2366 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2367 avoids printing a delay slot in a delay slot.
2368 * sh-opc.h (sh_table): Fully bracket last entry.
2370 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2372 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2374 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2376 * configure.in: Get host_makefile_frag from ${srcdir}.
2378 * configure.in: Autoconfiscated. Check for string[s].h. Create
2379 config.h from config.in. Don't set up sysdep.h link.
2380 * sysdep.h: New file.
2381 * configure, config.in: New files, generated from configure.in.
2382 * Makefile.in: Updated to be processed autoconf-style.
2383 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2384 (Makefile): Depend on config.status.
2385 (config.status): New rule.
2386 * configure.bat: Update Makefile substitutions.
2388 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2390 * mips-opc.c (L1): Define.
2391 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2392 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2395 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2397 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2398 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2399 have multiple add units but only a single logical unit.
2401 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2402 shifted by 18, without any insertion or extraction function.
2403 (insert_cr, extract_cr): Remove.
2405 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2407 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2410 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2412 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2413 * sh-opc.h: Add copyright.
2415 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2417 * Makefile.in (crunch-m68k): Delete extra target accidentally
2418 checked in a while ago.
2420 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2422 * sh-opc.h (sh_table): Add SH3 support.
2424 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2426 * sh-opc.h: Added bsrf and braf.
2428 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2430 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2431 bogus [ls]fm{ea,fd} patterns.
2433 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2434 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2435 initialize it from memory. Make function static.
2436 (print_insn_{big,little}_arm): New functions.
2437 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2438 the correct endianness.
2440 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2442 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2445 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2447 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2448 17th, so that it builds again using GCC as the compiler.
2450 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2452 * mips-dis.c (print_insn_little_mips): Cast return value from
2453 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2454 expects an unsigned long, and that might be fewer words of
2455 argument storage (e.g., if bfd_vma is long long on a 32-bit
2457 (print_insn_big_mips): Likewise with bfd_getb32 value.
2458 (_print_insn_mips): Now static.
2460 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2462 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2463 gcc memory hog problem with initializer is fixed.
2465 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2467 Merge in support for Mac MPW as a host.
2468 (Old change descriptions retained for informational value.)
2470 * mpw-config.in (archname): Compute from the config.
2471 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2473 * mpw-config.in (target_arch): Compute from canonical target.
2474 (m68k, mips, powerpc, sparc): Add architectures.
2475 * mpw-make.in (disassemble.c.o): Add.
2476 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2478 * mpw-config.in (BFD_MACHINES): Set to a default value.
2479 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2481 * mpw-make.in (CSEARCH): Add extra-include to search path.
2483 * mpw-config.in (varargs.h): Don't create.
2484 (sysdep.h): Create using forward-include.
2485 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2487 * mpw-config.in: New file, MPW version of configure.in.
2488 * mpw-make.in: New file, MPW version of Makefile.in.
2490 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2492 * alpha-dis.c (print_insn_alpha): Put empty statement after
2495 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2497 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2498 (low_sign_extend): Likewise.
2499 (get_field): Delete unused function.
2500 (set_field, deposit_14, deposit_21): Likewise.
2502 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2504 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2507 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2509 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2511 * alpha-opc.h (OSF_ASMCODE): define
2512 print pal-code names as defined in App C of the
2513 Alpha Architecture Reference Manual
2515 * alpha-dis.c: cleaned up output
2516 print stylized code forms as defined in App A.4.3 of the
2517 Alpha Architecture Reference Manual
2519 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2521 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2523 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2526 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2528 * m68k-dis.c (opcode): New function. Returns address of opcode
2529 table entry given index, even if the opcode table was split to
2530 work around gcc bugs.
2531 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2533 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2534 (reg_names): Now const.
2535 (print_insn_arg): Arrays cacheFieldName and names now const.
2536 (print_indexed): Array scales now const.
2538 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2540 * ppc-opc.c: Sort recently added instructions by minor opcode
2541 number within major opcode number.
2543 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2545 * hppa-dis.c: Include libhppa.h.
2547 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2549 * mips-opc.c: Change dli to use M_DLI, and add dla.
2551 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2553 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2555 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2557 * mips-opc.c: Add r4650 mul instruction.
2559 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2561 * mips-opc.c: Add uld and usd macros for unaligned double load and
2564 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2566 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2567 mfdcr, mtdcr, icbt, iccci.
2569 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2571 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2572 signed char fields to shorts, more portable.
2574 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2576 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2577 char fields as signed chars, since they may have negative values.
2579 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2581 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2582 (mycroft@netbsd.org).
2584 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2586 From "Logg, Ed" <elogg@ea.com>:
2587 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2588 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2591 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2593 * ppc-opc.c: Changes based on patch from David Edelsohn
2594 <edelsohn@mhpcc.edu>.
2595 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2598 (insert_tbr): New static function.
2599 (extract_tbr): New static function.
2600 (XFXFXM_MASK, XFXM): Define.
2601 (XSPRBAT_MASK, XSPRG_MASK): Define.
2602 (powerpc_opcodes): Add instructions to access special registers by
2603 name. Add mtcr and mftbu.
2605 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2607 * mips-opc.c (P3): Define.
2608 (mips_opcodes): Add mad and madu.
2610 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2612 * configure.in: Add W65 support.
2613 * disassemble.c: Likewise.
2614 * w65-opc.h, w65-dis.c: New files.
2616 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2618 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2621 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2623 * mips-opc.c: Add dli as a synonym for li.
2625 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2627 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2628 print something for reserved opcode values, even if it won't
2631 * mips-dis.c (_print_insn_mips): When initializing, shift right
2632 and mask, to avoid sign extension problems on the Alpha.
2634 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2637 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2639 * sh-opc.h (mov.l gbr): Get direction right.
2640 * sh-dis.c (print_insn_shx): New function.
2641 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2642 print opcodes with right byte order.
2644 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2646 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2647 to avoid conflicts with getopt.
2649 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2651 * hppa-dis.c (print_insn_hppa): Read the instruction using
2652 bfd_getb32, so that it works on a little endian or 64 bit host.
2653 Remove unused local variable op.
2655 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2657 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2658 addu does not work correctly if -mips3.
2660 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2662 * a29k-dis.c (print_special): Add special register names defined
2663 on 29030, 29040 and 29050.
2664 (print_insn): Handle new operand type 'I'.
2666 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2668 * Makefile.in (INSTALL): Use top level install.sh script.
2670 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2672 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2673 that it works on a little endian host.
2675 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2677 * configure.in: Use ${config_shell} when running config.bfd.
2679 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2681 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2683 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2685 * a29k-dis.c (print_insn): Print the opcode.
2687 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2689 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2691 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2693 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2695 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2697 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2698 which store a value into memory.
2700 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2702 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2703 * arm-dis.c, arm-opc.h: New files.
2705 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2707 * Makefile.in (ns32k-dis.o): Add dependency.
2708 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2709 string, not as array of chars.
2711 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2713 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2715 * sparc-opc.c: Added sparclite extended FP operations, and
2716 versions of v9 impdep* instructions permitting specification of
2719 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2721 * i960-dis.c (reg_names): Now const.
2722 (struct sparse_tabent): New type, copied from array type in mem
2724 (ctrl): Local static array ctrl_tab now const.
2725 (cobr): Local static array cobr_tab now const.
2726 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2727 static variable mem_tab no longer explicitly initialized. Changed
2728 mem_init to const array of struct sparse_tabent.
2729 (reg): Local static variable reg_tab no longer explicitly
2730 initialized. Changed reg_init to const array of struct
2732 (ea): Local static array scale_tab now const.
2734 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2737 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2739 * configure.bat: the disassember needs to be enabled for
2740 "objdump -d" to work in djgpp.
2742 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2744 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2745 (invalid_float): Enabled general version, doesn't require running
2746 on ns32k host. Changed to take char* argument, and test for
2747 explicitly specified sizes, instead of using sizeof() on host CPU
2749 (INVALID_FLOAT): Cast first argument.
2750 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2751 list_P032, list_M032): Now const.
2752 (optlist, list_search): Made appropriate arguments now point to
2754 (print_insn_arg): Changed static array of one-character-string
2755 pointers into a static const array of characters; fixed sprintf
2756 statement accordingly.
2758 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2760 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2761 from distribution. A ns32k-dis.c from a previous distribution has
2762 been brought up to date and supports the new interface.
2764 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2766 * configure.in: add bfd_ns32k_arch target support.
2768 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2769 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2771 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2773 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2776 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2778 * h8300-dis.c, mips-dis.c: Don't use true and false.
2780 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2782 * configure.in: Change --with-targets to --enable-targets.
2784 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2786 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2787 opcodes to the first instruction with that opcode, to speed
2788 disassembly of large files. From ralphc@pyramid.com (Ralph
2791 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2793 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2795 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2797 * configure.bat: update to latest makefile.in
2799 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2801 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2802 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2803 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2804 slot insn is in a delay slot.
2805 * z8k-opc.h: (resflg): Fix patterns.
2806 * h8500-opc.h Fix CR insn patterns.
2808 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2810 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2811 "cmpl" before POWER versions, so that gas -many uses them.
2813 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2815 * disassemble.c: New file.
2816 * Makefile.in (OFILES): Add disassemble.o.
2817 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2818 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2819 binutils/configure.in.
2821 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2822 opcode being examined.
2824 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2826 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2827 (insert_ral, insert_ram, insert_ras): New functions.
2828 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2829 RAS for store with update.
2831 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2833 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2834 (edelsohn@npac.syr.edu).
2836 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2838 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2841 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2843 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2845 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2847 * ppc-opc.c (powerpc_operands): The signedp field has been
2848 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2849 instead. Add new operand SISIGNOPT.
2850 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2851 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2852 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2855 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2857 * i386-dis.c (struct private): Renamed to dis_private. `private'
2858 is a reserved word for dynix cc.
2860 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2862 * configure.in: Change error message to refer to bfd/config.bfd
2863 rather than bfd/configure.in.
2865 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2867 * ppc-opc.c: Define POWER2 as short alias flag.
2868 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2871 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2873 * i960-dis.c (print_insn_i960): Don't read a second word for
2874 opcodes 0, 1, 2 and 3.
2876 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2878 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2880 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2882 * m68881-ext.c: Removed; no longer used.
2883 * Makefile.in: Changed accordingly.
2885 * m68k-dis.c (ext_format_68881): Don't declare.
2886 (print_insn_m68k): If an instruction uses place 'i', it uses at
2887 least four fixed bytes.
2888 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2889 extended float, convert to double using floatformat_to_double, not
2890 ieee_extended_to_double, and fetch the data before converting it.
2892 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2894 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2895 davidj@ICSI.Berkeley.EDU (David Johnson).
2897 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2899 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2900 PowerPC uses bdnz[l][a].
2902 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2904 * dis-buf.c, i386-dis.c: Include sysdep.h.
2906 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2908 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2910 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2911 by Motorola PowerPC 601 with PPC_OPCODE_601.
2912 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2913 Disassemble Motorola PowerPC 601 instructions as well as normal
2914 PowerPC instructions.
2916 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2918 * i960-dis.c (reg, mem): Just use a static array instead of
2921 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2923 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2924 condition name index if this is for a negated condition.
2926 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2927 Floating point format for 'H' operand is backwards from normal
2928 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2929 operands (fmpyadd and fmpysub), handle bizarre register
2930 translation correctly for single precision format.
2932 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2933 or 'I' operands if the next format specifier is 'M' (fcmp
2934 condition completer).
2936 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2938 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2939 single number giving a bitmask for the MB and ME fields of an M
2940 form instruction. Change NB to accept 32, and turn it into 0;
2941 also turn 0 into 32 when disassembling. Seperated SH from NB.
2942 (insert_mbe, extract_mbe): New functions.
2943 (insert_nb, extract_nb): New functions.
2944 (SC_MASK): Mask out SA and LK bits.
2945 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2946 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2947 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2948 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2949 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2950 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2951 (powerpc_macros): Define table of macro definitions.
2952 (powerpc_num_macros): Define.
2954 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2955 if PPC_OPERAND_NEXT is set.
2957 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2959 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2960 char. Retrieve contents using bfd_getl32 instead of shifting.
2962 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2964 * ppc-opc.c: New file. Opcode table for PowerPC, including
2965 opcodes for POWER (RS/6000).
2966 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2967 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2968 (CFILES): Add ppc-dis.c.
2969 (ppc-dis.o, ppc-opc.o): New targets.
2970 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2972 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2974 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2975 No space before 'u', 'f', or 'N'.
2977 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2979 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2980 farther than we should.
2982 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2984 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2986 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2988 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2990 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2991 needs it, to prevent reading past the end of a section.
2993 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2995 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2996 Removed t,A case for la; always use t,A(b) case.
2998 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3000 From Ted Lemen <mellon@pepper.ncd.com>
3001 * mips-dis.c (print_insn_arg): Handle 'k'.
3002 * mips-opc.c: Make cache use k, not t.
3004 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3006 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3007 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3008 FLOAT_FORMAT_CODE to put out floating point register names.
3010 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3012 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3014 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3018 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3020 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3021 larger than 32. Moved dsxx32 variants first for disassembler.
3023 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3025 * z8kgen.c, z8k-opc.h: Add full lda information.
3027 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3029 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3030 movb instructions. Any necessary space will be emitted by
3031 the code to handle nullification completers.
3033 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3037 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3039 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3040 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3042 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3044 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3046 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3048 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3049 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3051 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3053 * m88k-dis.c (m88kdis): comment change. Remove space after
3055 (printop): handle new arg types DEC and XREG for m88110.
3057 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3059 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3060 type for absolute branch addresses. Delete special
3061 "ble" and "be" code in 'W' operand code.
3063 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * mips-opc.c: Set hazard information correctly for branch
3066 likely instructions.
3068 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3070 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3071 info->fprintf_func for printing and info->print_address_func for
3074 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3076 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3078 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3080 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3081 Corrected second case of "b" for disassembler.
3083 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3085 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3086 to BFD swapping routines to correspond to BFD name changes.
3088 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * mips-opc.c: Change div machine instruction to be z,s,t rather
3091 than s,t. Change div macro to be d,v,t rather than d,s,t.
3092 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3093 rem and remu which generates only the corresponding div
3094 instruction. This is for compatibility with the MIPS assembler,
3095 which only generates the simple machine instruction when an
3096 explicit destination of $0 is used.
3097 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3099 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3101 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3102 WR_31 hazard for bal, bgezal, bltzal.
3104 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3106 * hppa-dis.c (print_insn_hppa): Use print function
3107 from within the disassemble_info, not fprintf_filtered.
3109 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3111 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3112 Law, law@cs.utah.edu.)
3114 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3116 * mips-opc.c ("absu"): Removed.
3119 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3122 Changed hazard information to distinguish between memory load
3123 delays and coprocessor load delays.
3125 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3127 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3129 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3131 * configure.in: Don't pass cpu to config.bfd.
3133 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3135 * m88k-dis.c (m88kdis): Make class unsigned.
3137 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3139 * alpha-dis.c (print_insn_alpha): One branch format case was
3140 missing the instruction name.
3142 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3144 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3145 Add the arch-specific auxiliary files.
3146 (OFILES): Remove the arch-specific auxiliary files
3147 and use BFD_MACHINES instead of DIS_LIBS.
3148 * configure.in: Set BFD_MACHINES based on --with-targets option.
3150 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3152 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3155 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3157 * sparc-opc.c: Change CONST to const to deal with gcc
3158 -Dconst=__const -traditional.
3160 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3162 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3163 coprocessor instructions out of #if 0, and made them use new
3166 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3168 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3170 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3172 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3173 instruction, for use by the disassembler.
3175 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3176 hand-coded sign extensions that depended on 32-bit host ints.
3177 FIXME, we still depend on big-endian host bitfield ordering.
3178 (sparc_print_insn): Set the insn_info_valid field, and the
3179 other fields that describe the instruction being printed.
3181 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3183 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3184 `jmp' instead of just one of them.
3186 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3188 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3189 (fput_fp_reg_r): Renamed from fput_reg_r.
3190 (fput_fp_reg): New function.
3191 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3193 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3195 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3197 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3199 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3201 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3202 don't output a space.
3204 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3206 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3208 * mips-opc.c: New file, containing opcode table from
3209 ../include/opcode/mips.h.
3210 * Makefile.in: Add it.
3212 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3214 * m88k-dis.c: New file, moved in from gdb and changed to use the
3215 new dis-asm.h disassembler interface.
3216 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3217 (m88k-dis.o): New target.
3219 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3221 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3222 argument string const char * to correspond to opcode/mips.h.
3224 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3226 * mips-dis.c: Updated to account for name changes in new version
3228 * Makefile.in: Added header file dependencies.
3230 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3232 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3234 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3236 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3237 extend, rather than shifts.
3239 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3241 * Makefile.in: Undo 15 June change.
3243 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3245 * m68k-dis.c (print_insn_arg): Change return value to byte count
3247 * m68k-dis.c: Re-write to detect invalid operands before
3248 printing anything, so we can handle this the same way we
3249 handle invalid opcodes.
3251 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3253 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3255 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3257 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3260 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3262 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3264 * configure.in: Do make sysdep.h link.
3265 * Makefile.in: Search ../include. Don't search ../bfd.
3267 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3269 Changes from Jeff Law, law@cs.utah.edu:
3270 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3271 Do not print a space before the completers specified by
3274 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3276 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3277 defined, since gdb has been fixed.
3279 Changes from Jeff Law, law@cs.utah.edu:
3280 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3281 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3282 be a *disassemble_info, not a *FILE.
3283 * hppa-dis.c: Support 'd', '!', and 'a'.
3284 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3285 * hppa-dis.c: Delete cases which are no longer needed.
3287 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3289 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3291 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3293 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3296 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3298 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3299 * configure.in: No longer need to configure to get sysdep.h.
3301 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3303 * Patches from Jeffrey Law <law@cs.utah.edu>.
3304 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3305 templates for 1.1 FP computational instructions.
3307 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3309 * h8500-dis.c (print_insn_h8500): Address argument is type
3311 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3314 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3315 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3317 * sparc-dis.c (compare_opcodes): Move static declaration to
3320 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3322 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3323 instruction, remove unimp hack from 'l' argument.
3325 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3327 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3330 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3332 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3333 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3336 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3338 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3339 arrays of string pointers to 2-d arrays of chars, to save
3342 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3344 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3345 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3347 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3349 * hppa-dis.c: New file from Utah, adapted to new disassembler
3351 * Makefile.in: Include it.
3353 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3355 * sh-dis.c, sh-opc.h: New files.
3357 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3359 * alpha-dis.c, alpha-opc.h: New files.
3361 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3363 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3366 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3368 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3370 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3372 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3375 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3377 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3378 and double percent signs a few places.
3380 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3382 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3383 Use info->print_address_func not print_address.
3385 * dis-buf.c (generic_print_address): New function.
3387 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3389 * Makefile.in: Add sparc-dis.c.
3390 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3392 Add `add' instruction to the set that get checked
3393 for a preceding `sethi' in order to print an absolute address.
3394 * (print_insn): Disassembly prefers real instructions.
3395 (is_delayed_branch): Speed up.
3396 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3397 Still missing some float ops, and needs testing.
3398 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3399 F_ALIAS. Use printf, not fprintf, when not passing a file
3401 (compare_opcodes): Check that identical instructions have
3402 identical opcodes, complain otherwise.
3405 * Include reg_names.
3407 Use dis-asm.h/read_memory_func interface.
3409 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3411 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3412 deliberately return non-zero to setjmp from longjmp. Otherwise
3413 this code fails to compile.
3415 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3417 * m68k-dis.c: Fix prototype for fetch_arg().
3419 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3421 * dis-buf.c: New file, for new read_memory_func interface.
3422 Makefile.in (OFILES): Include it.
3423 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3424 Use new read_memory_func interface.
3426 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3428 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3429 * h8500-opc.h: Fix couple of opcodes.
3431 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3433 * Makefile.in: add dvi & installcheck targets
3435 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3437 * Makefile.in: Update for h8500-dis.c.
3439 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3441 * h8500-dis.c, h8500-opc.h: New files
3443 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3445 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3446 ../include/dis-asm.h.
3447 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3448 and ../gdb/m68k-pinsn.c).
3449 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3450 and ../gdb/i386-pinsn.c).
3451 * m68881-ext.c: New file. Moved definition of
3452 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3453 * Makefile.in: Adjust for new files.
3454 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3455 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3456 can be dis-assembled.
3458 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3460 * mips-dis.c (print_insn_arg): Now returns void.
3462 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3464 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3465 files that use the macros.
3467 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3469 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3470 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3471 (CFILES): Added mips-dis.c.
3473 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3475 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3476 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3478 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3480 * Makefile.in: Improve *clean rules.
3481 * configure.in: Allow a default host.
3483 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3485 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3486 files include other sysdep files
3488 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3490 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3492 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3494 * configure.in: For host support, use ../bfd/configure.host
3495 so it stays in sync with the ../bfd/hosts database.
3497 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3499 * configure.in: use cpu-vendor-os triple instead of nested cases
3501 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3503 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3504 *always* the wrong one.
3506 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3508 * z8kgen.c: added copyright info
3510 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3512 * z8k-dis.c (unparse_instr): prettier tabs
3513 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3515 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3517 * configure.in: Add ncr* configuration.
3518 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3519 picayune ANSI compilers happy.
3521 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3523 * configure.in (i386): Make i386 and i486 synonymous for now.
3524 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3526 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3528 * Makefile.in (install): Fix typo.
3530 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3532 * Makefile.in (make): Remove obsolete crud.
3533 (sparc-opc.o): Avoid Sun Make VPATH bug.
3535 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3537 * Makefile.in: since there are no SUBDIRS, remove rule and
3538 references of subdir_do.
3540 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3542 * Makefile.in (install): Get the library name right here too.
3543 Don't install bfd.h, since it's unrelated to this library. No
3544 subdirs to recurse into, either.
3545 (CFILES): The source file has a .c suffix, not .o.
3547 * sparc-opc.c: New file, moved from BFD.
3548 * Makefile.in (OFILES): Build it.
3550 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3552 * z8k-dis.c: fixed forward refferences of some declarations.
3554 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3556 * Makefile.in: get the name of the library right
3558 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3560 * z8k-dis.c: knows how to disassemble z8k stuff
3561 * z8k-opc.h: new file full of z8000 opcodes
3565 version-control: never
projects / external / binutils.git / blob