1 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
3 * configure.in: detect cygwin* instead of cygwin32*
4 * configure: regenerate
6 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
8 * mips-opc.c (IS_M): Added.
11 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
13 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
17 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
20 * cgen-asm.in (insert_1): New function.
21 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
22 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
23 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
24 * cgen-dis.in (extract_1): New function.
25 (extract_normal): buf_ctrl renamed to ex_info, update type.
26 Progress on handling of CGEN_INT_INSN_P.
27 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
28 Update handling of CGEN_INT_INSN_P. Handle errors from
29 @arch@_cgen_extract_operand.
30 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
31 (default_print_insn): Renamed from print_insn.
32 Handle ! CGEN_INT_INSN_P.
33 (print_insn_@arch@): Handle error returns from print_insn.
34 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
35 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
36 (@arch@_cgen_lookup_get_insn_operands): Ditto.
38 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
41 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
43 * m10300-opc.c: Allow autoincrement stores using the same register
44 for source and destination operands.
46 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
48 * m10300-opc.c: DSP instrutions which only write to one general
49 register have no restrictions on matching operands.
51 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
54 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
56 * m32r-opc.h,m32r-opc.c: Regenerate.
59 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
61 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
64 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
66 * i386-dis.c (OP_3DNowSuffix): New static function.
69 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
70 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
71 (insn_codep): New static variable.
72 (print_insn_x86): Init insn_codep after prefixes.
73 (grps): Add GRP14 entries for prefetch, prefetchw.
76 From Jeff B Epler <jepler@usgs.gov>
77 * i386-dis.c (Suffix3DNow): New table.
79 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
81 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
83 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
85 * d10v-dis.c (print_operand): If num is nonzero, then
86 add OPERAND_ACC1, not OPERAND_ACC0.
88 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
90 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
93 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
95 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
99 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
101 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
104 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
106 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
108 start-sanitize-nortel-ppc750
109 1998-09-09 Michael Meissner <meissner@cygnus.com>
111 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
114 end-sanitize-nortel-ppc750
115 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
117 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
119 (print_insn_little_arm): Detect Thumb symbols in elf object
122 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
124 * alpha-dis.c (print_insn_alpha): Use the machine type to
125 decide which PALcode set to include.
127 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
129 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
131 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
133 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
134 MSUB and MSUBS instructions.
137 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
139 * mips-opc.c: Insert contents of vu0.h, rather than including it.
141 * Makefile.am: Rebuild dependencies.
145 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
147 * ppc-opc.c (powerpc_operands): Omit parens around additions in
150 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
152 start-sanitize-coldfire
153 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
154 ColdFire, as below for mulsl and mulul.
156 end-sanitize-coldfire
157 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
158 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
159 +, -, and d for ColdFire.
161 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
162 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
163 (extract_mbe): Likewise.
165 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
167 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
169 * m10300-opc.c: First cut at UDF instructions.
171 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
173 * m32r-opc.c: Regenerate (remove semantic descriptions).
175 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
177 * arm-dis.c (print_insn_big_arm): Fix indentation.
178 (print_insn_little_arm): Likewise.
180 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
182 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
184 (print_insn_little_arm): Likewise.
186 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
188 Move all global state data into opcode table struct, and treat
189 opcode table as something that is "opened/closed".
190 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
191 (cgen_asm_init): Delete.
192 (cgen_set_parse_operand_fn): New function.
193 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
194 (cgen_dis_init): Delete.
195 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
196 (cgen_current_{opcode_table_mach,endian}): Delete.
197 start-sanitize-cygnus
198 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
199 * cgen-dis.in (all fns): Ditto.
200 * cgen-opc.in (all fns): Ditto.
202 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
204 start-sanitize-cygnus
205 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
207 * cgen-dis.in (print_normal): Split into two.
208 (print_address): New function.
209 (extract_insn_normal): Clarify insn_value arg.
210 (print_int_insn): Renamed from print_insn.
211 (print_insn): New arg.
212 (print_insn_@arch@): Open opcode table if not already done so.
213 Move reading of insn into print_insn.
216 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
218 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
222 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
224 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
225 accept an accumulator choice.
226 * m32r-opc.c,m32r-opc.h: Regenerate.
229 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
231 * m10300-opc.c: Add entries for "no_match_operands" field in
235 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
237 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
241 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
243 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
246 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
248 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
250 * m10300-opc.c: Add autoincrement memory loads/stores.
254 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
256 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
257 phmsubh respectively.
260 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
262 start-sanitize-cygnus
263 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
265 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
266 @arch_cgen_get_int_operand.
267 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
268 Update call to @arch@_cgen_insert_operand.
269 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
270 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
271 (extract_insn_normal): New arg `pc', callers updated.
272 Update call to @arch@_cgen_extract_operand.
273 (print_insn): Update call to CGEN_EXTRACT_FN.
275 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
278 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
280 * m10300-opc.c: Fix load to sp and store from sp for the am33.
281 Add more multimedia instructions.
283 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
285 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
290 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
292 * mips-opc.c (pref): Enabled for the r5900.
295 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
297 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
299 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
301 (OP_J): Remove unnecessary subtraction when 16-bit displacement
302 will be masked later.
305 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
307 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
310 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
312 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
313 from raw register #s to symbolic names to make debugging easier.
316 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
318 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
320 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
322 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
323 start-sanitize-cygnus
324 * Makefile.am (CGENDIR): Set via configure.
325 (CGEN): New variable.
326 (CGENFILES): object.scm renamed to cos.scm.
327 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
328 (stamp-m32r): Pass prefix to run-cgen.
329 * Makefile.in: Regenerate.
330 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
331 * cgen-dis.in: Ditto.
332 * cgen-opc.in: Ditto.
333 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
334 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
335 * configure: Regenerate.
339 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
341 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
343 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
345 * m10300-opc.c: Reorder more instructions so that we do not
346 accidentally match a mn10300 instruction when we really
347 wanted an am33 instruction.
350 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
352 * m10300-dis.c: Only recognize instructions from the currently
354 * m10300-opc.c: Add field indicating the particular variant of
355 the mn10300 each instruction is available on.
357 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
359 * configure.in: For bfd_vax_arch, build vax-dis.lo.
360 * Makefile.am: Rebuild dependencies.
361 (CFILES): Add vax-dis.c.
362 (ALL_MACHINES): Add vax-dis.lo.
363 * aclocal.m4: Rebuild with current libtool.
364 * configure, Makefile.in: Rebuild.
366 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
368 * vax-dis.c: New file, from work by Pauline Middelink
369 <middelin@polyware.iaf.nl>.
370 * disassemble.c (ARCH_vax): Define if ARCH_all.
371 (disassembler): Add case for ARCH_vax.
372 * makefile.vms: Support compilation on vms/vax.
375 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
377 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
378 the DVP_OPERAND_RELOC_11_S4 relocation.
382 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
384 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
386 (disassemble): Correctly handle FMT_D10 instructions.
388 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
389 am33 shift instructions.
391 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
393 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
394 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
396 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
397 (mn10300_opcodes): Reorder so as to try and select opcodes from
398 the core chip when multiple alternatives exist. Change several
399 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
400 "macbu" instructions. Fix typos in a couple DSP instructions too.
403 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
405 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
406 related to sign extension and the size of ints.
408 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
410 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
411 instructions. Support (sp) addressing mode by expanding it into
415 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
417 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
418 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
419 be used as immediate values.
423 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
425 * m10300-opc.c: Support 4 byte DSP instructions.
428 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
430 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
433 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
435 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
438 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
440 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
443 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
445 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
446 found on the mn10300.
449 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
451 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
454 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
456 * mips-dis.c (print_insn_little_mips): Previously, instruction
457 printing references the symbol table to determine whether the
458 instruction resides in a block regular instructions or mips16
459 instructions. However, when the disassembler gets used in other
460 environments where the symbol table is not present, we no longer
461 rely in the symbol table, rather, use the low bit of the
462 instructions address to guess. There should be no change for usage
463 of the disassembler in host based programse, gdb ,objdump.
464 (print_insn_big_mips): ditto.
465 (print_insn_mips): ditto
467 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
469 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
471 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
474 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
475 operands for the am33.
476 (mn10300_opcodes): Add new instructions from the am33.
478 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
480 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
482 * i386-dis.c (index16): Add '%' to register names. Use ','
485 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
487 * i386-dis.c: Don't print opcode suffix when we can figure out the
488 size (and gas can!) by register operands, or from the default
490 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
492 (dis386, dis386_twobyte, grps): Use new suffix macros.
493 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
494 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
495 order of cmps operands to agree with Intel docs. Correct operand
496 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
497 agree with Intel docs.
498 (print_insn_x86): Print orphan fwait before other prefixes.
499 Return correct byte count for orphan fwait with prefixes. Don't
500 print `bound' operands in reverse order.
501 (ckprefix): Stop accumulating prefixes if we get fwait.
502 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
504 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
506 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
507 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
509 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
511 Fix problems when bfd_vma is wider than long.
512 * i386-dis.c: Make op_address and start_pc unsigned.
513 (set_op): Make parameter unsigned.
514 (print_insn_x86): Cast to bfd_vma when passing a value to
516 * ns32k-dis.c (CORE_ADDR): Don't define.
517 (print_insn_ns32k): Change type of addr to bfd_vma. Use
518 bfd_scan_vma to read back address.
519 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
521 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
522 (NEXTULONG): New definition.
523 (print_insn_m68k): Avoid overflow when computing third argument of
525 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
526 Use disp instead of val to store offset values.
527 (print_indexed): Use base_disp instead of word to store base
528 displacement, to avoid overflow.
529 * m10300-dis.c (disassemble): Cast value to long when computing
530 pc-relative address, to get correct sign extension.
532 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
534 * m32r-opc.c: Regenerate.
536 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
538 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
539 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
541 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
543 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
545 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
547 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
549 (OP_DSreg): Rename from OP_DSSI.
550 (OP_ESreg): Rename from OP_ESDI.
551 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
553 (append_seg): Rename from append_prefix.
554 (ptr_reg): New function.
555 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
557 (PREFIX_ADDR): Rename from PREFIX_ADR.
558 (float_reg): Add non-broken opcodes for people who don't want
561 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
563 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
566 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
568 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
570 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
572 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
573 0; produce error message for shifts of size 32 (or 64 for 64-bit
574 shifts), because the hardware doesn't support them.
577 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
579 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
582 * vu0.h (sqc2): Fix opcode.
584 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
588 start-sanitize-cygnus
589 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
591 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
592 Change pinfo to use WR_HILO.
595 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
597 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
598 LONG_2, LONG_2b formats to use this new operand.
600 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
602 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
604 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
606 * sparc-dis.c (print_insn_sparc): big endian instruction / little
609 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
611 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
612 and SHORT_B3b formats to use Rb instead of Ra.
614 Add FLAG_MUL16 to MUL2XH opcode.
616 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
617 to existing 1.1.1 parallelisation prohibition procedure.
619 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
621 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
622 * cgen-dis.in (extract_normal): Likewise.
623 * m32r-asm.c,m32r-dis.c: Regenerate.
626 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
628 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
632 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
634 * mips-opc.c (multu1): Add two operand variant for the r5900.
637 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
639 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
640 with a shift count of 0.
643 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
645 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
647 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
649 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
650 (_print_insn_mips): Likewise.
651 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
655 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
657 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
658 (cgen_hw_lookup_by_num): New function.
661 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
664 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
666 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
668 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
670 * sparc-dis.c (print_insn_sparc): Always fetch instructions
671 as big-endian on SPARClite.
674 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
676 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
678 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
682 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
684 * d30v-opc.c (pre_defined_register): Remove alias for r0.
687 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
689 * mips-opc.c (break): Added 20-bit single-operand break
690 instruction for R5900 only.
693 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
695 * po/Make-in (install-info): New target.
697 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
699 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
700 * configure: Rebuild.
702 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
704 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
705 variety of ISA2 instructions to set bottom ten bits of trap code.
707 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
709 * Makefile.am (config.status): Add explicit target so that
710 config.status depends upon bfd/configure.in.
711 * Makefile.in: Rebuild.
713 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
715 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
716 instructions to set bottom ten bits of break code.
717 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
718 for above optional argument.
720 start-sanitize-cygnus
721 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
723 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
724 * m32r-opc.h: Regenerate.
727 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
729 * makefile.vms: Run dec c with /nodebug.
731 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
733 * Makefile.in: Rebuilt.
734 * Makefile.am: Regenerated dependencies with mkdep.
736 * opintl.h (_): Define as dgettext.
738 start-sanitize-cygnus
739 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
741 * configure.in: Add support for --enable-cgen-maint.
742 * Makefile.am (M32R_DEPS): New variable.
743 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
744 * aclocal.m4: Regenerate.
745 * Makefile.in: Regenerate.
746 * configure: Regenerate.
748 * Makefile.am (CGENFILES): Add minsn.scm.
751 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
753 * cgen-asm.c: Internationalised.
754 start-sanitize-cygnus
755 * cgen-asm.in: Internationalised.
756 * cgen-opc.in: Internationalised.
758 * m32r-asm.c: Internationalised.
759 * m32r-dis.c: Internationalised.
760 * m32r-opc.c: Internationalised.
762 * aclocal.m4: Regenerated.
763 * configure: Regenerated.
764 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
765 * Makefile.in: Rebuild.
766 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
767 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
769 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
771 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
773 * aclocal.m4, configure: Rebuild with current tools.
775 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
777 * opintl.h: New file - contains internationalisation macros used
778 by source files in this directory.
779 * po/: New subdirectory - contains internationalisation files.
780 * po/Make-in: New file - Makefile constructor.
781 * po/POTFILES.in: New file - list of files in opcodes directory
782 that should be scan for internationalisation macros.
783 * po/opcodes.pot: New file - list of internationisation strings
784 found in files mentioned in po/POTFILES.in.
785 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
786 entry. Add intl directory to include paths.
787 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
788 HAVE_STRCPY, HAVE_LC_MESSAGES
789 * configure.in: Add rule to build Makefile in po subdirectory.
790 * Makefile.in: Rebuilt.
791 * aclocal.m4: Rebuilt.
792 * config.in: Rebuilt.
793 * configure: Rebuilt.
794 * alpha-opc.c: Internationalised.
795 * arc-dis.c: Internationalised.
796 * arc-opc.c: Internationalised.
797 * arm-dis.c: Internationalised.
798 * cgen-asm.c: Internationalised.
799 * d30v-dis.c: Internationalised.
800 * dis-buf.c: Internationalised.
802 * dvp-dis.c: Internationalised.
803 * dvp-opc.c: Internationalised.
805 * h8300-dis.c: Internationalised.
806 * h8500-dis.c: Internationalised.
807 * i386-dis.c: Internationalised.
808 * m10200-dis.c: Internationalised.
809 * m10300-dis.c: Internationalised.
810 * m68k-dis.c: Internationalised.
811 * m88k-dis.c: Internationalised.
812 * mips-dis.c: Internationalised.
813 * ns32k-dis.c: Internationalised.
814 * opintl.h: Internationalised.
815 * ppc-opc.c: Internationalised.
816 * sparc-dis.c: Internationalised.
817 * v850-dis.c: Internationalised.
818 * v850-opc.c: Internationalised.
820 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
822 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
823 (asm_hash_table_entries): New variable.
824 (cgen_asm_init): Free asm_hash_table_entries.
825 (hash_insn_array,hash_insn_list): New functions.
826 (build_asm_hash_table): Use them. Hash macro insns as well.
827 (cgen_asm_lookup_insn): Update.
828 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
829 (dis_hash_table_entries): New variable.
830 (cgen_dis_init): Free dis_hash_table_entries.
831 (hash_insn_array,hash_insn_list): New functions.
832 (build_dis_hash_table): Use them. Hash macro insns as well.
833 (cgen_dis_lookup_insn): Update.
834 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
835 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
836 (cgen_macro_insn_count): New function.
837 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
838 All callers updated. Sanity check result of extract fn.
839 (@arch@_cgen_get_insn_operands): Change result type to void.
840 Delete args insn_value, length. New arg fields. All callers updated.
841 (@arch@_cgen_lookup_get_insn_operands): New function.
842 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
844 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
846 * i386-dis.c (OP_DSSI): Print segment override.
849 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
851 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
855 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
857 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
861 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
863 * vu0.h (vlqd, vlqi): Update per revised specs.
867 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
869 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
870 (vif_operands): Update.
871 (vif_get_unpackloc): Delete.
872 (state_vif_unpackloc{,_star_p}): Delete.
873 (dvp_opcode_init_parse): Update.
874 (vif_unpack_len_value): Avoid divide by zero.
878 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
880 * vu0.h: Specs changed for VCALLMSR bit pattern.
881 * mips-dis.c: (print_insn_arg) Matching change.
884 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
886 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
889 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
891 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
892 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
893 * configure.in: Define and substitute WIN32LDFLAGS and
895 * aclocal.m4: Rebuild with new libtool.
896 * configure, Makefile.in: Rebuild.
899 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
901 * vu0.h: Corrected bit pattern for VMAXI opcode.
904 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
906 * m32r-opc.c: Regenerate.
909 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
911 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
912 (dvp_expand_macro): Implement.
913 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
914 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
917 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
919 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
920 before trying to copy it.
921 * Makefile.in: Rebuild.
923 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
925 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
928 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
930 * m32r-opc.c: Fix bit patterns for SAT and SATB.
933 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
935 * ns32k-dis.c (bit_extract_simple): New function to extract bits
936 from an arbitrary valid buffer instead of fetching them on demand
938 (invalid_float): use bit_extract_simple() instead of bit_extract().
941 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
943 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
944 * m32r-opc.h: Add extra control registers.
947 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
949 From H.J. Lu <hjl@gnu.org>:
950 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
953 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
955 * Branched binutils 2.9.
957 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
959 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
960 disassembling last 4 bytes of a section.
962 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
964 Fix some gcc -Wall warnings:
965 * arc-dis.c (print_insn): Add casts to avoid warnings.
966 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
967 * d10v-dis.c (dis_long, dis_2_short): Likewise.
969 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
970 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
971 (parse_bc, parse_vfreg, parse_accdest): Likewise.
972 (parse_ffstreg, parse_vif_mode): Likewise.
974 * m10200-dis.c (disassemble): Likewise.
975 * m10300-dis.c (disassemble): Likewise.
976 * ns32k-dis.c (print_insn_ns32k): Likewise.
977 * ppc-opc.c (insert_ral, insert_ram): Likewise.
978 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
979 * cgen-opc.c (cgen_keyword_search_next): Likewise.
980 * d10v-dis.c (dis_long, dis_2_short): Likewise.
981 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
983 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
984 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
985 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
987 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
989 * tic80-dis.c (print_one_instruction): Likewise.
991 * w65-dis.c (print_operand): Likewise.
992 * z8k-dis.c (fetch_data): Likewise.
993 * a29k-dis.c: Add return type for find_byte_func_type.
994 * arc-opc.c: Include <stdio.h>. Remove declarations of
995 insert_multshift and extract_multshift.
996 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
998 (extract_value): Fully parenthesize expression.
1000 * dvp-opc.c: Include <ctype.h>.
1001 (print_sdest): Add default case to switch.
1003 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1004 * h8500-opc.h (h8500_table): Fully bracket initializer.
1005 * w65-opc.h (optable): Likewise.
1006 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1007 * i386-dis.c (OP_E): Initialize local variables.
1008 * m10200-dis.c (print_insn_mn10200): Likewise.
1009 * mips-dis.c (print_insn_mips16): Likewise.
1010 * sh-dis.c (print_insn_shx): Likewise.
1011 * v850-dis.c (print_insn_v850): Likewise.
1012 * ns32k-dis.c (print_insn_arg): Declare.
1013 (get_displacement, invalid_float): Declare.
1014 (list_search, sign_extend, flip_bytes): Declare return type.
1015 (get_displacement): Likewise.
1016 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1018 (print_insn_ns32k): Make i unsigned.
1019 (invalid_float): Make static. Declare type of val.
1020 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1021 on each for iteration.
1022 * tic30-dis.c (get_indirect_operand): Likewise.
1023 * z8k-dis.c (print_insn_z8001): Declare return type.
1024 (print_insn_z8002): Likewise.
1025 (unparse_instr): Fix sprintf format strings.
1027 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1029 * mips-opc.c: Add "sync.l" and "sync.p".
1032 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1034 * dvp-opc.c (extract_vif_datalen): Rewrite.
1035 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1037 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1039 * dvp-dis.c (print_insn): Print unpack address in hex.
1040 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1041 Don't skip over '*', just record it.
1042 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1043 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1044 Don't skip over '*', just record it.
1045 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1046 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1047 (vif_opcodes): Likewise.
1048 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1049 (vif_macros,vif_macro_count): New globals.
1050 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1051 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1052 (vif_get_wl_cl): New function.
1053 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1056 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1058 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1059 default m68k variant to recognize.
1061 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1062 (ctrl, cobr, mem, ea): Likewise.
1063 (print_addr): Likewise. Remove cast.
1064 (ea): Cast argument of print_addr to bfd_vma.
1066 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1068 (cgen_parse_unsigned_integer): Likewise.
1069 (cgen_parse_address): Likewise.
1071 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1073 * i960-dis.c (ctrl): Add full braces to structure initialization.
1074 (cobr, mem, reg): Likewise.
1075 (ea): Correct parenthesization in expression.
1077 * cgen-asm.c: Include <ctype.h>.
1078 (build_asm_hash_table): Remove unused local variable i.
1079 (cgen_parse_keyword): Add casts to avoid warnings.
1081 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1082 symbol. Fix indentation.
1083 (print_insn_little_arm): Likewise.
1085 start-sanitize-r5900
1086 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1088 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1092 start-sanitize-m32rx
1093 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1095 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1100 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1102 * dvp-opc.c (vif_operand_datalen_special): New global.
1105 start-sanitize-r5900
1106 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1108 * vu0.h (vcallms): Use 'O' for call target operand.
1109 * mips-dis.c (print_insn_arg): Handle 'O'.
1112 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1114 * configure.in: Use AM_DISABLE_SHARED.
1115 * aclocal.m4, configure: Rebuild with libtool 1.2.
1117 start-sanitize-r5900
1118 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1120 * mips-dis.c: Change '%' to '#' in r5900 support.
1124 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1126 These patches are courtesy of Jonathan Walton and Tony Thompson
1127 (athompso@cambridge.arm.com).
1129 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1132 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1133 both the offset and the label closest to the destination.
1135 start-sanitize-r5900
1136 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1138 * vu0.h: New file with cop2/vu0 instructions.
1139 * mips-opc.c: Include vu0.h.
1140 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1142 (print_insn_mips): Do not emit a tab after an instruction if the
1143 first arg is an instruction completer (&). If the next arg is an
1144 escape character (%), then print the next arg verbatim.
1145 * Makefile.am (mips-opc.lo): Depend on vu0.h
1149 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1151 * dvp-opc.c (vif_opcodes): Add stcycl.
1153 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1155 * dvp-dis.c (print_dma): Change length from 16 to 8.
1158 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1160 * m32r-opc.h: Regenerate.
1163 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1165 * dvp-opc.c (print_dest1): Print dest spec again.
1166 (print_vfreg,print_accdest): Likewise.
1167 (vif_unpack_len): Round result up to word boundary.
1170 start-sanitize-vr4320
1171 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1173 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1175 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1177 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1182 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1184 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1185 (print_insn): Do mask comparison on proper opcode word.
1186 Print unsigned values in hex.
1187 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1188 (parse_bc): Catch missing dest.
1189 (parse_vfreg): Replace atoi call with strtol.
1190 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1191 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1192 (extract_gif_eop): New function.
1193 (gif_operands): Update eop entry.
1194 (VGIFOP,VGIFNREGS): Fix calcs.
1195 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1196 (gif_regs): Add entry for unused 11 case.
1197 (print_gif_regs): Print empty list instead of nothing.
1198 (extract_gif_nloop): Fix value calc.
1199 (print_gif_nloop): Always print value, even if 0.
1200 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1201 (vif_operands): Use them for wl,cl fields.
1202 (state_vif_wl,state_vif_cl): New static locals.
1203 (parse_vif_mode): Handle numeric args.
1204 (vif_unpack_len_value,vif_unpack_len): New functions.
1205 (vif_insn_len): Call vif_unpack_len.
1208 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1210 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1212 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1214 * cgen-asm.in: Move insertion of generated routines to top of file.
1215 (insert_normal): Add prototype. Delete `shift' arg.
1216 * cgen-dis.in: Move insertion of generated routines to top of file.
1217 (extract_normal): Add prototype. Delete `shift' arg.
1218 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1219 (print_keyword): Add prototype. Fix type of `attrs' arg.
1221 start-sanitize-vr4320
1222 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1224 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1225 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1228 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1230 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1231 assume that info->symbols is non-empty.
1233 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1235 * alpha-opc.c (cvtqs) There is no such thing.
1236 (cvttq): Missing most of the /*d variants.
1238 start-sanitize-r5900
1239 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1241 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1243 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1244 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1247 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1249 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1250 delayed branches or jumps.
1253 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1255 * dvp-opc.c (vif_operands): Add unpack[u] support.
1256 (vif_opcodes): Ditto.
1257 (*_vif_imrubits): Renamed from *_vif_imrbits.
1259 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1261 * dvp-dis.c (print_insn): Handle word number.
1262 Handle mips address vs vu address.
1263 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1264 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1265 ({insert,extract}_dma_addr): Fix word ofset.
1266 ({insert,print}_gif_regs): Fix encode/decode.
1269 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1271 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1273 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1274 * tic30-dis.c (print_branch): Likewise.
1276 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1277 * dvp-dis.c (dvp_info_mach_type): New function.
1278 (print_insn_dvp): Call it.
1279 (print_vif): Return length of 4 if mpg or direct insn so following
1280 insns get properly disabled.
1281 (print_gif): Fix word order.
1282 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1283 (gif_operands): Fix word order.
1284 (gif_opcodes): Likewise.
1285 ({insert,extract,print}_gif_regs): Likewise.
1286 (gif_regs): Add new register number/name changes.
1287 (dma_opcodes): Add dmarefe insn.
1290 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1292 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1293 saved_symbol code as it is no longer needed.
1295 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1297 * cgen-asm.c: Include symcat.h.
1298 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1300 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1303 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1305 * dvp-opc.c (extra_dma_flags): Fix typos.
1306 (dma_operands): Fix word numbers.
1307 (dma_opcodes): Likewise.
1308 ({insert,extract}_dma_flags): Likewise.
1311 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1313 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1316 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1318 * dvp-dis.c (print_gif): Complete.
1319 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1320 (state_gif_{nregs,regs,nloop}): New static locals.
1321 (*_gif_*): Complete.
1322 (dvp_opcode_init_{parse,print}): Init gif state locals.
1323 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1324 (vif_insn_len): Handle `unpack'.
1325 ({insert,extract}_dma_flags): Complete.
1328 start-sanitize-r5900
1329 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1331 * mips-opc.c (mula.s): Renamed from multa.s.
1334 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1336 * m32r-opc.[ch]: Regenerate.
1339 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1341 * dvp-opc.c (dma_operands): Rewrite.
1342 (dma_operand_{count,addr}): New globals.
1343 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1344 (insert_dma_addr): Insert value into insn.
1345 (extract_dma_addr): Extract value from insn.
1347 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1349 * dvp-dis.c (print_vu): Handle loi insns.
1350 (print_insn): Likewise.
1351 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1352 (vu_operands): Make LDEST1 a FAKE operand.
1353 (parse_dest1): Allow elided argument.
1354 (print_dest1): Don't print the argument.
1356 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1358 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1359 (print_vfreg): Don't print dest spec.
1360 (parse_accdest): Dest spec is optional.
1361 (print_accdest): Don't print dest spec.
1364 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1366 * Makefile.am (CGENFILES): Update.
1367 * Makefile.in: Regenerate.
1368 * cgen-asm.in (insert_normal): Result is error message now.
1369 Validate value to be inserted.
1370 (insert_insn_normal): Result is error message now.
1371 (@arch@_cgen_assemble_insn): Update.
1372 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1373 arguments. Don't perform validation here.
1374 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1376 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1378 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1379 operand instance list.
1380 * m32r-opc.c: Regenerate.
1382 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1384 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1385 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1387 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1389 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1391 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1393 * configure.in: Get the version number from BFD.
1394 * configure: Rebuild.
1396 From H.J. Lu <hjl@gnu.org>:
1397 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1398 * Makefile.in: Rebuild.
1400 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1402 * m32r-opc.c: Regenerate.
1403 * m32r-opc.h: Regenerate.
1405 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1408 Ignore ALIAS insns if asked to.
1409 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1410 * m32r-opc.c: Regenerate.
1413 * dvp.opc.c: Nicely format opcode tables.
1414 (vu_operands): New element UFLAGS.
1415 (parse_uflags,print_uflags): New functions.
1416 (vu_upper_opcodes): Add UFLAGS to all insns.
1419 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1421 Fix rac to accept only a0:
1422 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1423 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1424 Introduce OPERAND_GPR.
1425 * d10v-dis.c (print_operand): Likewise.
1427 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1429 * cgen-opc.in: New file.
1430 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1431 * Makefile.am (CGENFILES): Add cgen-opc.in.
1432 * Makefile.in: Regenerate.
1434 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1435 (cgen_hw_lookup): Make result const.
1437 * cgen-dis.in (*): Use PTR instead of void *.
1438 (print_insn): Delete unused vars `i', `syntax'.
1440 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1443 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1445 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1446 (vif_opcodes): Update renamed insns.
1447 * dvp-dis.c (*): Likewise.
1450 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1452 * configure, aclocal.m4: Rebuild with new libtool.
1454 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1456 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1457 instructions use a PC relative branch, not absolute.
1459 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1461 * configure.in: Set libtool_enable_shared rather than
1462 libtool_shared. Remove diversion hack.
1463 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1465 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1467 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1468 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1470 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1472 * tic30-dis.c: New file.
1473 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1474 * configure.in: Handle bfd_tic30_arch.
1475 * Makefile.am: Rebuild dependencies.
1476 (CFILES): Add tic30-dis.c
1477 (ALL_MACHINES): Add tic30-dis.lo.
1478 * configure, Makefile.in: Rebuild.
1480 start-sanitize-m32rx
1481 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1483 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1484 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1485 macwhi-a and macwlo-a instructions.
1489 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1491 * dvp-opc.c, fixed encoding of a bunch of instructions to
1492 be consistent with the asmvu assembler (and inconsistent
1493 with the specification).
1495 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1497 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1498 in the opcode table. The pkemscalf instruction must come first.
1500 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1502 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1505 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1507 * m32r-opc.h (HAVE_CPU_M32R): Define.
1510 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1512 * dvp-dis.c, dvp-opc.c: New files.
1513 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1514 * configure: Regenerate.
1515 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1516 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1517 (mips-dis.lo): Compile with @archdefs@.
1518 * Makefile.in: Regenerate.
1519 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1520 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1523 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1525 * v850-opc.c (insertion routines): If both alignment and size is
1526 wrong then report this.
1528 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1530 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1531 Only recognize instructions for the current target_processor.
1533 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1535 * d10v-dis.c (PC_MASK): Correct value.
1536 (print_operand): If there's a reloc, don't calculate the
1537 address because they could be in different sections.
1539 start-sanitize-cygnus
1540 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1542 * cgen.sh: Rewrite to be like simulator's version.
1543 * Makefile.am (cgen): Update call to cgen.sh.
1544 * Makefile.in: Regenerate
1547 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1549 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1550 instruction after the 4650's "mul" instruction; nobody's using the
1551 4010 these days. If object files someday indicate which processor
1552 variant they're intended for, we can do a better job at this.
1554 start-sanitize-r5900
1555 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1557 * mips-opc.c (c.lt.s): Add r5900 variant.
1561 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1563 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1564 table provided entry size. Use CGEN_INSN_MNEMONIC.
1565 (cgen_parse_keyword): Rewrite.
1566 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1567 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1568 * cgen-opc.c: Clean up pass over `struct foo' usage.
1569 (cgen_keyword_lookup_value): Handle "" entry.
1570 (cgen_keyword_add): Likewise.
1571 start-sanitize-cygnus
1572 * Makefile.am: Add cgen support.
1573 * Makefile.in: Regenerate.
1574 * configure.in: Add cgen support.
1575 * configure: Regenerate.
1576 * aclocal.m4: Regenerate.
1577 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1580 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1582 * mips-opc.c: Add FP_D to s.d instruction flags.
1584 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1586 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1588 start-sanitize-tic80
1589 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1591 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1592 PC relative offset forms before the 15 bit forms. An assembler command
1593 line option now chooses the default.
1596 start-sanitize-r5900
1597 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1599 * mips-opc.c: Add many missing r5900 instructions.
1602 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1604 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1605 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1607 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1609 * configure: Only build libopcodes shared if --enable-shared's value
1610 was `yes', or was set to `*opcodes*'.
1611 * aclocal.m4: Likewise.
1612 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1613 original source of this bit of code. It's not clear what the best fix
1616 start-sanitize-r5900
1617 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1619 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1621 start-sanitize-tic80
1622 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1624 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1625 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1626 offset forms before the 15 bit forms, to default to the long forms.
1629 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1631 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1633 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1635 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1636 symbol if none is present.
1637 (print_insn_big_arm): Prevent examination of stored symbol if
1640 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1642 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1644 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1646 * disassemble.c: Remove disasm_symaddr() function.
1648 * arm-dis.c: Use info->symbol instead of info->flags to determine
1649 if disassmbly should be in Thumb or Arm mode.
1651 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1653 * arm-dis.c: Add support for disassembling Thumb opcodes.
1654 (print_insn_thumb): New function.
1656 * disassemble.c (disasm_symaddr): New function.
1658 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1659 (thumb_opcodes): Table of Thumb opcodes.
1661 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1663 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1665 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1666 and 'v' as operand types.
1668 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1670 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1671 <olivier.carmona@di.epfl.ch>.
1672 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1673 which has a two word opcode with a one word argument.
1675 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1677 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1678 unsigned, not signed.
1679 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1681 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1683 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1684 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1685 (ftrv): Slay the cut-and-paste monster.
1687 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1689 * d10v-dis.c (print_operand):
1690 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1692 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1694 * d10v-opc.c (OPERAND_FLAG): Split into:
1695 (OPERAND_FFLAG, OPERAND_CFLAG) .
1699 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1701 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1702 field for all INSN_MACRO's.
1703 * mips16-opc.c: same
1705 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1707 * mips-opc.c (sync,cache): These are 3900 insns.
1709 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1711 sh-opc.h (sh_table): Remove ftst/nan.
1713 start-sanitize-cygnus
1714 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1716 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1717 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1719 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1723 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1725 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1726 Add tx49 insns and configury.
1729 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1731 * mips-opc.c (ffc, ffs): Fix mask.
1733 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1735 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1738 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1740 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1741 start-sanitize-cygnus
1742 Added VR5400 instructions.
1743 (N5): New cpu-id macro.
1745 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1747 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1749 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1750 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1752 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1754 * v850-dis.c (disassemble): Replace // with /* ... */
1756 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1758 * sparc-opc.c: Add wr & rd for v9a asr's.
1759 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1760 (v9a_asr_reg_names): New variable.
1761 Patch from David Miller <davem@vger.rutgers.edu>.
1763 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1765 * sparc-opc.c (v9notv9a): New insn type.
1766 (IMPDEP): Move to the end to not conflict with edge8 et al.
1767 Patch from David Miller <davem@vger.rutgers.edu>.
1769 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1771 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1773 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1775 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1777 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1779 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1780 of disassemble_info structure to determine if an overlay address
1781 has a matching symbol in low memory.
1783 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1784 new symbol_at_address_func field in disassemble_info structure.
1786 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1788 * v850-opc.c (extract_d22): Use signed arithmatic.
1790 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1792 * mips-opc.c: Three op mult is not an ISA insn.
1794 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1796 * mips-opc.c: Fix formatting.
1798 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1800 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1801 than assuming that char is signed. Explicitly sign extend 16 bit
1802 values, rather than assuming that short is 16 bits.
1803 (OP_sI, OP_J, OP_DIR): Likewise.
1805 start-sanitize-v850e
1806 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1808 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1812 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1814 * v850-opc.c: Fix typo in comment.
1816 * v850-dis.c (disassemble): Add test of processor type when
1817 determining opcodes.
1819 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1821 * configure.in: Use a diversion to set enable_shared before the
1822 arguments are parsed.
1823 * configure: Rebuild.
1825 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1827 * m68k-opc.c (TBL1): Use ! rather than `.
1828 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1830 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1832 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1834 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1836 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1839 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1840 * aclocal.m4: Rebuild with new libtool.
1841 * configure: Rebuild.
1843 start-sanitize-v850e
1844 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1846 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1849 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1851 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1853 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1855 * v850-opc.c (v850_opcodes): Further rearrangements.
1857 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1859 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1861 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1863 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1866 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1868 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1870 * mips16-opc.c: Added mips16 sdbbp.
1873 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1875 * v850-opc.c: Initialise processors field of v850_opcode structure.
1877 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1879 Merge changes from Martin Hunt:
1881 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1883 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1884 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1885 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1887 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1889 * d30v-dis.c (print_insn): First operand of d*i (delayed
1890 branch) instructions is relative.
1892 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1893 (d30v_operand_table): Add IMM6S3 type.
1894 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1896 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1897 and cmp instructions.
1899 * d30v-opc.c: Correct entries for repeat*, and sat*.
1900 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1901 types. Correct several formats.
1903 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1905 * d30v-opc.c (pre_defined_registers): Change control registers.
1907 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1908 SHORT_C2. Manual was incorrect.
1910 * d30v-dis.c (lookup_opcode): Return value now indicates
1911 if an opcode has a short and a long form. Used for deciding
1912 to append a ".s" or ".l".
1913 (print_insn): Append a ".s" to an instruction if it is
1914 the short form and ".l" if it is a long form. Do not append
1915 anything if the instruction has only one possible size.
1917 * d30v-opc.c: Change mulx2h to require an even register.
1918 New form: SHORT_A2; a SHORT_A form that needs an even
1919 register as the first operand.
1921 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1922 instruction was not being disassembled if there were an odd
1923 number of instructions.
1925 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1927 start-sanitize-v850e
1928 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1930 * v850-dis.c (disassemble): Improved display of register lists.
1933 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1935 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1936 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1937 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1938 fandnot1s, fandnot2s.
1940 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1942 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1944 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1946 * cgen-asm.c (cgen_parse_address): New argument resultp.
1947 All callers updated.
1948 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1950 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1952 * mn10200-dis.c (disassemble): PC relative instructions are
1953 relative to the next instruction, not the current instruction.
1955 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1957 * v850-dis.c (disassemble): Only signed extend values that are not
1958 returned by extract functions.
1959 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1961 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1963 * v850-opc.c: Update comments. Remove use of
1964 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1966 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1968 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1970 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1972 * configure: Rebuilt with latest devo autoconf for NT support.
1974 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1976 * v850-dis.c (disassemble): Use curly brace syntax for register
1979 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1980 where r0 is being used as a destination register.
1982 start-sanitize-v850e
1983 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1985 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1988 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1990 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1991 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1992 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1993 Add insns to access SGR and DBR.
1994 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1996 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1998 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2000 start-sanitize-v850e
2001 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2003 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2004 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2007 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2009 * configure (cgen_files): Add support for v850e target.
2010 * configure.in (cgen_files): Add support for v850e target.
2012 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2014 * configure (cgen_files): Add support for v850ea target.
2015 * configure.in (cgen_files): Add support for v850ea target.
2018 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2020 * configure.in (bfd_arc_arch): Add.
2021 * configure: Rebuild.
2022 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2023 * Makefile.in: Rebuild.
2024 * arc-dis.c, arc-opc.c: New files.
2025 * disassemble.c (ARCH_all): Define ARCH_arc.
2026 (disassembler): Add ARC support.
2028 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2030 start-sanitize-v850e
2031 * v850-dis.c (disassemble): Add support for v850EA instructions.
2033 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2034 (v850_opcodes): Add v850EA instructions.
2036 * v850-dis.c (disassemble): Add support for v850E instructions.
2038 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2039 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2040 insert_spe, extract_spe): New Functions.
2041 (v850_opcodes): Add v850E instructions.
2044 * v850-opc.c: Reorganised and re-layed out to improve readability
2047 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2049 * configure: Rebuild with autoconf 2.12.1.
2051 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2053 * aclocal.m4, configure: Rebuild with new automake patches.
2055 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2057 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2058 * acinclude.m4: Just include acinclude.m4 from BFD.
2059 * aclocal.m4, configure: Rebuild.
2061 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2063 * Makefile.am: New file, based on old Makefile.in.
2064 * acconfig.h: New file.
2065 * acinclude.m4: New file.
2066 * stamp-h.in: New file.
2067 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2068 Removed shared library handling; now handled by libtool. Replace
2069 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2070 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2071 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2072 handling in AC_OUTPUT.
2073 * dep-in.sed: Change .o to .lo.
2074 * Makefile.in: Now built with automake.
2075 * aclocal.m4: Now built with aclocal.
2076 * config.in, configure: Rebuild.
2078 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2080 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2082 start-sanitize-r5900
2083 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2085 * mips-opc.c: Fix coding of mtsa.
2088 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2090 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2092 * sparc-dis.c (sorted_opcodes): New static local.
2093 (struct opcode_hash): `opcode' is pointer to const element.
2094 (build_hash): First arg is now table of sorted pointers.
2095 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2096 (compare_opcodes): Update.
2098 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2100 * cgen-opc.c: #include <ctype.h>.
2101 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2102 Handle case insensitive hashing.
2103 (hash_keyword_value): Change type of `value' to unsigned int.
2105 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2107 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2108 precision FP, mark it as such. Likewise for double precision
2109 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2111 start-sanitize-r5900
2112 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2115 start-sanitize-r5900
2116 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2118 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2119 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2122 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2124 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2126 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2127 nesting depth when all the macros are expanded.
2129 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2131 * sparc-opc.c: The fcmp v9a instructions take an integer register
2132 as a destination, not a floating point register. From Christian
2133 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2135 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2137 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2138 syntax. From Roman Hodek
2139 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2141 * i386-dis.c (twobyte_has_modrm): Fix pand.
2143 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2145 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2147 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2149 * arm-dis.c: Add prototypes for arm_decode_shift and
2152 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2154 * mips-opc.c: Add r3900 insns.
2156 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2158 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2159 print delay slot instructions on the same line. When using a PC
2160 relative load, add a comment with the value being loaded if it can
2163 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2165 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2166 to pushS/popS for segment regs and byte constant so that
2167 pushw/popw printed when in 16 bit data mode.
2169 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2170 print cbtw, cwtd in 16 bit data mode.
2171 * i386-dis.c (putop): extra case W to support above.
2173 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2174 address size prefix in 16 bit address mode.
2176 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2178 * sh-dis.c: Reindent. Rename local variable fprintf to
2181 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2183 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2185 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2187 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2189 * mips16-opc.c (mip16_opcodes): same.
2191 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2193 * m68k-opc.c (moveb): Change $d to %d.
2195 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2197 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2198 (twobyte_has_modrm): Likewise.
2200 (OP_MMX, OP_EM, OP_MS): New static functions.
2202 * i386-dis.c: Revert patch of April 4. The output now matches
2205 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2207 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2210 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2212 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2214 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2216 * Makefile.in (install): Depend upon installdirs.
2217 (installdirs): New target.
2219 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2221 From Thomas Graichen <graichen@rzpd.de>:
2222 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2223 * configure: Rebuild.
2225 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2227 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2228 Delete string{,s}.h support.
2230 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2232 * cgen-asm.c (cgen_parse_operand_fn): New global.
2233 (cgen_parse_{{,un}signed_integer,address}): Update call to
2234 cgen_parse_operand_fn.
2235 (cgen_init_parse_operand): New function.
2236 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2237 from cgen_asm_init_parse.
2238 (m32r_cgen_assemble_insn): New operand `errmsg'.
2239 Delete call to as_bad, return error message to caller.
2240 (m32r_cgen_asm_hash_keywords): #if 0 out.
2242 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2244 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2246 [case 'J']: Fix typo in register name.
2248 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2250 * configure.in: Substitute SHLIB_LIBS.
2251 * configure: Rebuild.
2252 * Makefile.in (SHLIB_LIBS): New variable.
2253 ($(SHLIB)): Use $(SHLIB_LIBS).
2255 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2257 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2259 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2261 * disassemble.c (disassembler): Handle m32r.
2263 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2265 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2266 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2267 * Makefile.in (CFILES): Add them.
2268 (ALL_MACHINES): Add them.
2269 (dependencies): Regenerate.
2270 * configure.in (cgen_files): New variable.
2271 (bfd_m32r_arch): Add entry.
2272 * configure: Regenerate.
2274 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2276 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2277 * configure: Rebuild.
2279 * Makefile.in: Rebuild dependencies.
2281 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2283 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2286 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2288 * Branched binutils 2.8.
2290 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2292 * m10200-dis.c: Rename from mn10200-dis.c.
2293 * m10200-opc.c: Rename from mn10200-opc.c.
2294 * m10300-dis.c: Rename from mn10300-dis.c
2295 * m10300-opc.c: Rename from mn10300-opc.c.
2296 * Makefile.in: Update accordingly.
2298 * mips16-opc.c: Add mul and dmul macros.
2300 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2302 * makefile.vms: Update CFLAGS, add clean target.
2304 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2306 * mips-opc.c: Add "wait". From Ralf Baechle
2307 <ralf@gnu.ai.mit.edu>.
2309 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2310 * configure, config.in: Rebuild.
2311 * sysdep.h: Include <stdlib.h> if it exists.
2312 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2314 * Makefile.in: Rebuild dependencies.
2316 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2318 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2319 Andrew Bray <andy@madhouse.demon.co.uk>.
2321 * mips-opc.c: Add cast when setting mips_opcodes.
2323 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2325 * v850-dis.c (disassemble): Fix sign extension problem.
2326 * v850-opc.c (extract_d*): Fix sign extension problems to make
2327 disassembly calculate branch offsets correctly.
2329 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2331 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2333 * mips-opc.c: Add dctr and dctw.
2335 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2337 * d30v-dis.c (print_insn): Change the way signed constants
2340 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2342 * Makefile.in (BFD_H): New variable.
2343 (HFILES): New variable.
2344 (CFILES): Add all C files.
2345 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2346 Delete old dependencies, and build new ones.
2347 * dep-in.sed: New file.
2349 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2351 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2353 start-sanitize-coldfire
2354 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2356 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2359 end-sanitize-coldfire
2360 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2362 * mn10200-opc.c: Change "trap" to "syscall".
2363 * mn10300-opc.c: Add new "syscall" instruction.
2365 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2367 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2368 mulul insns on the coldfire.
2370 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2372 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2373 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2374 (print_insn_little_arm): Likewise.
2376 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2378 Based on patches from H.J. Lu <hjl@lucon.org>:
2379 * i386-dis.c (fetch_data): Add prototype.
2380 * m68k-dis.c (fetch_data): Add prototype.
2381 (dummy_print_address): Add prototype. Make static.
2382 * ppc-opc.c (valid_bo): Add prototype.
2383 * sparc-dis.c (build_hash_table): Add prototype.
2384 (is_delayed_branch, compute_arch_mask): Add prototypes.
2385 (print_insn_sparc): Make several local variables const.
2386 (compare_opcodes): Change arguments to const PTR. Add prototype.
2387 * sparc-opc.c (arg): Change name field to be const.
2388 (lookup_name, lookup_value): Add prototypes. Change table and
2389 name parameters to be const.
2390 (sparc_encode_asi): Change name parameter to be const.
2391 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2392 (sparc_encode_sparclet_cpreg): Likewise.
2393 (sparc_decode_asi): Change return type to be const.
2394 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2395 (sparc_decode_sparclet_cpreg): Likewise.
2397 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2399 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2400 Solaris doesn't like the combined options, and the -f is
2402 (stamp-tshlink, install): Likewise.
2404 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2406 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2409 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2411 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2413 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2415 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2418 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2420 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2422 start-sanitize-tic80
2423 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2425 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2427 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2429 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2432 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2434 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2435 floatformat_to_double to make portable.
2436 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2439 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2441 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2442 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2444 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2446 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2447 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2449 start-sanitize-tic80
2450 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2452 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2453 (OFF_SL_BR_SCALED): ... to this, and added the flag
2454 TIC80_OPERAND_BASEREL to the flags word.
2455 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2459 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2461 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2462 Change mips_opcodes from const array to a pointer,
2463 and change bfd_mips_num_opcodes from const int to int,
2464 so that we can increase the size of the mips opcodes table
2467 start-sanitize-tic80
2468 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2470 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2471 store BITNUM values in the table in one's complement form
2472 to match behavior when assembler is given a raw numeric
2473 value for a BITNUM operand.
2474 * tic80-dis.c (print_operand_bitnum): Ditto.
2477 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2479 * d30v-opc.c: Removed references to FLAG_X.
2481 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2483 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2485 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2487 * Makefile.in: Added d30v object files.
2488 * configure: (bfd_d30v_arch) Rebuilt.
2489 * configure.in: (bfd_d30v_arch) Added new case.
2490 * d30v-dis.c: New file.
2491 * d30v-opc.c: New file.
2492 * disassemble.c (disassembler) Add entry for d30v.
2494 start-sanitize-tic80
2495 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2497 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2498 representations for the floating point BITNUM values.
2500 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2502 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2503 in the table in one's complement form, as they appear in the
2505 (tic80_symbol_to_value): Use macros to access predefined
2507 (tic80_value_to_symbol): Ditto.
2508 (tic80_next_predefined_symbol): New function.
2509 * tic80-dis.c (print_operand_bitnum): Remove code that did
2510 one's complement for BITNUM values.
2513 start-sanitize-r5900
2514 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2516 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2519 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2521 * makefile.vms: Remove 8 bit characters. Update to latest
2524 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2526 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2528 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2530 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2531 (IMM24_PCREL): Likewise.
2533 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2535 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2536 address for an extended PC relative instruction that is not a
2539 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2541 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2544 start-sanitize-tic80
2545 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2547 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2548 (tic80_opcodes): Sort entries so that long immediate forms
2549 come after short immediate forms, making it easier for
2550 assembler to select the right one for a given operand.
2553 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2555 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2557 (print_insn_mips16): Likewise.
2559 start-sanitize-r5900
2560 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2562 * mips-opc.c: add r5900.
2565 start-sanitize-tic80
2566 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2568 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2569 a symbol class that restricts translation to just that
2570 class (general register, condition code, etc).
2572 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2574 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2575 and REG_DEST_E for register operands that have to be
2576 an even numbered register. Add REG_FPA for operands that
2577 are one of the floating point accumulator registers.
2578 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2579 (tic80_opcodes): Change entries that need even numbered
2580 register operands to use the new operand table entries.
2581 Add "or" entries that are identical to "or.tt" entries.
2584 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2586 * mips16-opc.c: Add new cases of exit instruction for
2588 * mips-dis.c (print_mips16_insn_arg): Display floating point
2589 registers in operands of exit instruction. Print `$' before
2590 register names in operands of entry and exit instructions.
2592 start-sanitize-tic80
2593 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2595 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2596 pairs for all predefined symbols recognized by the assembler.
2597 Also used by the disassembling routines.
2598 (tic80_symbol_to_value): New function.
2599 (tic80_value_to_symbol): New function.
2600 * tic80-dis.c (print_operand_control_register,
2601 print_operand_condition_code, print_operand_bitnum):
2602 Remove private tables and use tic80_value_to_symbol function.
2605 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2607 * d10v-dis.c (print_operand): Change address printing
2608 to correctly handle PC wrapping. Fixes PR11490.
2610 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2612 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2615 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2617 * mips-dis.c (print_insn_mips16): Set insn_info information.
2618 (print_mips16_insn_arg): Likewise.
2620 * mips-dis.c (print_insn_mips16): Better handling of an extend
2621 opcode followed by an instruction which can not be extended.
2623 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2625 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2626 coldfire moveb instruction to not allow an address register as
2627 destination. Although the documentation does not indicate that
2628 this is invalid, experiments uncovered unexpected behavior.
2629 Added a comment explaining the situation. Thanks to Andreas
2630 Schwab for pointing this out to me.
2632 start-sanitize-tic80
2633 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2635 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2636 entries are presorted so that entries with the same mnemonic are
2637 adjacent to each other in the table. Sort the entries for each
2638 instruction so that this is true.
2641 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2643 * m68k-dis.c: Include <libiberty.h>.
2644 (print_insn_m68k): Sort the opcode table on the most significant
2645 nibble of the opcode.
2647 start-sanitize-tic80
2648 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2650 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2651 "vsub", "vst", "xnor", and "xor" instructions.
2652 (V_a1): Renamed from V_a, msb of accumulator reg number.
2653 (V_a0): Add macro, lsb of accumulator reg number.
2655 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2657 * tic80-dis.c (print_insn_tic80): Broke excessively long
2658 function up into several smaller ones and arranged for
2659 the instruction printing function to be callable recursively
2660 to print vector instructions that have both a load and a
2661 math instruction packed into a single opcode.
2662 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2663 to explain why it comes after the other vector opcodes.
2666 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2668 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2669 move insns to handle immediate operands.
2671 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2673 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2674 fix operand mask in the "moveml" entries for the coldfire.
2676 start-sanitize-tic80
2677 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2679 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2680 New macros for building vector instruction opcodes.
2681 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2682 FMT_LI, which were unused. The field is now a flags field.
2683 Remove some opcodes that are possible, but illegal, such
2684 as long immediate instructions with doubles for immediate
2685 values. Add "vadd" and "vld" instructions.
2687 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2689 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2690 the order more logical. Move the shift alias instructions ("rotl",
2691 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2692 interspersed with the regular sr.x and sl.x instructions. Add
2693 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2694 "sub", "subu", "swcr", and "trap".
2696 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2698 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2699 (OFF_SL_PC): Renamed from OFF_SL.
2700 (OFF_SS_BR): New operand type for base relative operand.
2701 (OFF_SL_BR): New operand type for base relative operand.
2702 (REG_BASE): New operand type for base register operand.
2703 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2704 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2705 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2707 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2708 10 char field, padded with spaces on rhs, rather than a string
2709 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2710 than old TIC80_OPERAND_RELATIVE. Add support for new
2711 TIC80_OPERAND_BASEREL flag bit.
2713 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2715 * tic80-dis.c (print_insn_tic80): Print floating point operands
2717 * tic80-opc.c (SPFI): Add single precision floating point
2718 immediate operand type.
2719 (ROTATE): Add rotate operand type for shifts.
2720 (ENDMASK): Add for shifts.
2721 (n): Macro for the 'n' bit.
2722 (i): Macro for the 'i' bit.
2723 (PD): Macro for the 'PD' field.
2724 (P2): Macro for the 'P2' field.
2725 (P1): Macro for the 'P1' field.
2726 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2730 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2732 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2733 adding in current address for pc-relative operands.
2735 start-sanitize-tic80
2736 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2738 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2739 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2740 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2741 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2742 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2743 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2744 (REG_SCALED, LSI_SCALED): New operand types.
2745 (E): New macro for 'E' bit at bit 27.
2746 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2747 opcodes, including the various size flavors (b,h,w,d) for
2748 the direct load and store instructions.
2750 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2752 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2754 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2755 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2756 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2757 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2758 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2759 masks with "MASK_* & ~M_*" to get the M bit reset.
2760 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2762 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2764 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2765 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2766 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2768 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2769 CC, SICR, and LICR table entries.
2770 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2771 "bcnd", and "brcr" opcodes.
2774 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2776 * ppc-opc.c (powerpc_operands): Make comment match the
2777 actual fields (no shift field).
2778 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2779 start-sanitize-tic80
2780 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2781 partial implementation, work in progress.
2782 * tic80-opc.c (tic80_operands): Begin construction operands table.
2783 (tic80_opcodes): Continue populating opcodes table and start
2784 filling in the operand indices.
2785 (tic80_num_opcodes): Add this.
2788 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2790 * m68k-opc.c: Add #B case for moveq.
2792 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2794 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2795 before they are used.
2797 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2799 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2800 for "breakpoint" instruction.
2802 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2804 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2805 (dep): Use ALL_CFLAGS rather than CFLAGS.
2807 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2809 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2812 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2814 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2815 start-sanitize-tic80
2816 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2819 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2821 * mips16-opc.c: Add "abs".
2823 start-sanitize-tic80
2824 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2826 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2827 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2828 (disassembler): Add bfd_arch_tic80 support to set disassemble
2829 to print_insn_tic80.
2830 * tic80-dis.c (print_insn_tic80): Add stub.
2832 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2834 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2835 * configure: Regenerate with autoconf.
2836 * tic80-dis.c: Add file.
2837 * tic80-opc.c: Add file.
2840 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2842 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2844 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2846 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2847 (mn10200_opcodes): Use it for some logicals and btst insns.
2848 Add "break" and "trap" instructions.
2850 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2852 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2854 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2857 relative load or add now depends upon whether the instruction is
2860 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2862 * mn10200-dis.c: Finish writing disassembler.
2863 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2864 Fix mask for "jmp (an)".
2866 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2867 handle endianness issues for mn10300.
2869 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2871 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2873 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2874 instruction. Fix opcode field for "movb (imm24),dn".
2876 * mn10200-opc.c (mn10200_operands): Fix insertion position
2879 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2881 * mn10200-opc.c: Create mn10200 opcode table.
2882 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2883 but moving along nicely.
2885 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2887 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2889 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2891 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2892 specifiers for fmovem* instructions.
2894 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2896 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2898 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2900 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2903 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2905 * mn10300-opc.c: Add some comments explaining the various
2908 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2910 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2912 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2915 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2916 operand specifiers in fmovm* instructions.
2918 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2920 * ppc-opc.c (insert_li): Give an error if the offset has the two
2921 least significant bits set.
2923 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2925 * mips-dis.c (print_insn_mips16): Separate the instruction from
2926 the arguments with a tab, not a space.
2928 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2930 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2933 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2936 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2938 * configure: Rebuild with autoconf 2.12.
2940 Add support for mips16 (16 bit MIPS implementation):
2941 * mips16-opc.c: New file.
2942 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2943 (mips16_reg_names): New static array.
2944 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2945 after seeing a 16 bit symbol.
2946 (print_insn_little_mips): Likewise.
2947 (print_insn_mips16): New static function.
2948 (print_mips16_insn_arg): New static function.
2949 * mips-opc.c: Add jalx instruction.
2950 * Makefile.in (mips16-opc.o): New target.
2951 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2952 * configure: Rebuild.
2954 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2956 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2957 operand specifiers in *save, *restore and movem* instructions.
2959 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2962 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2963 register operands for immediate arithmetic, not, neg, negx, and
2964 set according to condition instructions.
2966 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2967 specifier of the effective-address operand in immediate forms of
2968 arithmetic instructions. The specifier for the immediate operand
2969 notes how and where the constant will be stored.
2971 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2973 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2976 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2979 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2981 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2983 * mn10300-dis.c (disassemble): Handle register lists.
2985 * mn10300-opc.c: Fix handling of register list operand for
2986 "call", "ret", and "rets" instructions.
2988 * mn10300-dis.c (disassemble): Print PC-relative and memory
2989 addresses symbolically if possible.
2990 * mn10300-opc.c: Distinguish between absolute memory addresses,
2991 pc-relative offsets & random immediates.
2993 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2995 (disassemble): Handle SPLIT and EXTENDED operands.
2997 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10300-dis.c: Rough cut at printing some operands.
3001 * mn10300-dis.c: Start working on disassembler support.
3002 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3004 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3006 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3008 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3010 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3012 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3014 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3015 register argument is calls and jmp instructions.
3017 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3019 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3020 getx operand. Fix opcode for mulqu imm,dn.
3022 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3024 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3025 in MN10300_OPERAND_SPLIT operands for how many bits
3026 appear in the basic insn word. Add IMM32_HIGH24,
3027 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3028 (mn10300_opcodes): Use new operands as needed.
3030 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3031 for bset, bclr, btst instructions.
3032 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3034 * mn10300-opc.c (mn10300_operands): Remove many redundant
3035 operands. Update opcode table as appropriate.
3036 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3037 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3039 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3041 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3042 operands (for indexed load/stores). Fix bitpos for DI
3043 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3044 few instructions that insert immediates/displacements in the
3045 middle of the instruction. Add IMM8E for 8 bit immediate in
3046 the extended part of an instruction.
3047 (mn10300_operands): Use new opcodes as appropriate.
3049 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3051 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3052 sequential so the assembler never parallelizes it with
3055 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3057 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3058 a data/address register that appears in register field 0
3059 and register field 1.
3060 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3062 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3064 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3065 standard disassembly.
3067 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3068 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3069 Recategorize PALcode instructions.
3071 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3073 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3075 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3077 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3078 there are no operand types.
3080 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3082 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3084 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3086 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3088 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3090 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3092 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3093 and sst.w instructions.
3095 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3098 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3100 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3103 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3105 * ppc-opc.c (PPCPWR2): Define.
3106 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3109 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3111 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3112 field for movhu instruction.
3114 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3115 cast value to "long" not "signed long" to keep hpux10
3118 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3120 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3123 * mn10300-opc.c (FMT*): Remove definitions.
3125 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3126 for shift-by-register opcodes.
3128 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3129 into [AD][MN][01] for encoding the position of the register
3132 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3134 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3135 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3137 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3139 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3140 Fix various typos. Add "PAREN" operand.
3141 (MEM, MEM2): Define.
3142 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3143 operands. Fix several typos.
3145 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3148 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3150 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3151 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3153 (mn10300_opcodes): Break opcode format out into its own field.
3154 Update many operand fields to deal with signed vs unsigned
3155 issues. Fix one or two typos in the "mov" instruction
3156 opcode, mask and/or operand fields.
3158 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3160 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3161 m68851 wasn't reset.
3163 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3165 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3166 all opcodes. Very rough cut at operands for all opcodes.
3168 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3171 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3173 * mn10200-opc.c, mn10300-opc.c: New files.
3174 * mn10200-dis.c, mn10300-dis.c: New files.
3175 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3176 * disassemble.c: Break mn10x00 support into 10200 and 10300
3178 * configure.in: Likewise.
3179 * configure: Rebuilt.
3181 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3183 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3185 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3187 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3189 * disassemble (ARCH_mn10x00): Define.
3190 (disassembler): Handle bfd_arch_mn10x00.
3191 * configure.in: Recognize bfd_mn10x00_arch.
3192 * configure: Rebuilt.
3194 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3196 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3197 accordingly. Don't declare functions using op_rtn.
3199 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3201 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3202 params to be more standard.
3203 * (disassemble): Print absolute addresses and symbolic names for
3204 branch and jump targets.
3205 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3207 * (v850_opcodes): Add breakpoint insn.
3209 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3211 * m68k-opc.c: Move the fmovemx data register cases before the
3212 other cases, so that they get recognized before the data register
3213 does gets treated as a degenerate register list.
3215 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * mips-opc.c: Add a case for "div" and "divu" with two registers
3218 and a destination of $0.
3220 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3222 * mips-dis.c (print_insn_arg): Add prototype.
3223 (_print_insn_mips): Ditto.
3225 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3227 * mips-dis.c (print_insn_arg): Print condition code registers as
3230 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3232 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3234 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3236 * v850-dis.c (disassemble): Make static. Provide prototype.
3238 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3240 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3243 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3245 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3246 ']' characters into the output stream.
3247 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3248 Add "memop" field to all opcodes (for the disassembler).
3249 Reorder opcodes so that "nop" comes before "mov" and "jr"
3250 comes before "jarl".
3252 * v850-dis.c (print_insn_v850): Fix typo in last change.
3254 * v850-dis.c (print_insn_v850): Properly handle disassembling
3255 a two byte insn at the end of a memory region when the memory
3256 region's size is only two byte aligned.
3258 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3260 * v850-dis.c (v850_reg_names): Define.
3261 (v850_sreg_names, v850_cc_names): Likewise.
3262 (disassemble): Very rough cut at printing operands (unformatted).
3264 * v850-opc.c (BOP_MASK): Fix.
3265 (v850_opcodes): Fix mask for jarl and jr.
3267 * v850-dis.c: New file. Skeleton for disassembler support.
3268 * Makefile.in Remove v850 references, they're not needed here.
3269 * configure.in: Add v850-dis.o when building v850 toolchains.
3270 * configure: Rebuilt.
3271 * disassemble.c (disassembler): Call v850 disassembler.
3273 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3274 (insert_d8_6, extract_d8_6): New functions.
3275 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3276 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3278 (IF4A, IF4B): Use "D7" instead of "D7S".
3279 (IF4C, IF4D): Use "D8_7" instead of "D8".
3280 (IF4E, IF4F): New. Use "D8_6".
3281 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3282 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3284 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3285 (v850_operands): Change D16 to D16_15, use special insert/extract
3286 routines. New new D16 that uses the generic insert/extract code.
3287 (IF7A, IF7B): Use D16_15.
3288 (IF7C, IF7D): New. Use D16.
3289 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3291 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3292 message. Issue an error if the branch offset is odd.
3294 * v850-opc.c: Add notes about needing special insert/extract
3295 for all the load/store insns, except "ld.b" and "st.b".
3297 * v850-opc.c (insert_d22, extract_d22): New functions.
3298 (v850_operands): Use insert_d22 and extract_d22 for
3300 (insert_d9): Fix range check.
3302 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3304 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3305 and set bits field to D9 and D22 operands.
3307 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3309 * v850-opc.c (v850_operands): Define SR2 operand.
3310 (v850_opcodes): "ldsr" uses R1,SR2.
3312 * v850-opc.c (v850_opcodes): Fix opcode specs for
3313 sld.w, sst.b, sst.h, sst.w, and nop.
3315 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3317 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3318 end of the opcode table.
3320 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3322 * d10v-opc.c (pre_defined_registers): Added register pairs,
3323 "r0-r1", "r2-r3", etc.
3325 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3327 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3328 Create I16U for an unsigned 16bit mmediate operand.
3329 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3331 * v850-opc.c (v850_operands): Define EP operand.
3332 (IF4A, IF4B, IF4C, IF4D): Use EP.
3334 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3335 with immediate operand, "movhi". Tweak "ldsr".
3337 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3338 correct. Get sld.[bhw] and sst.[bhw] closer.
3340 * v850-opc.c (v850_operands): "not" is a two byte insn
3342 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3344 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3346 * v850-opc.c (two): Get order of words correct.
3348 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3350 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3351 register source and destination operands.
3352 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3354 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3355 same thinko in "trap" opcode.
3357 * v850-opc.c (v850_opcodes): Add initializer for size field
3360 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3361 Add D8 for 8-bit unsigned field in short load/store insns.
3362 (IF4A, IF4D): These both need two registers.
3363 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3364 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3365 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3366 for "ldsr" and "stsr".
3367 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3370 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3371 short store word (sst.w).
3373 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3375 * v850-opc.c (v850_operands): Added insert and extract fields,
3376 pointers to functions that handle unusual operand encodings.
3378 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3380 * v850-opc.c (v850_opcodes): Enable "trap".
3382 * v850-opc.c (v850_opcodes): Fix order of displacement
3383 and register for "set1", "clr1", "not1", and "tst1".
3385 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3387 * v850-opc.c (v850_operands): Add "B3" support.
3388 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3391 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3393 * v850-opc.c: Close unterminated comment.
3395 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3397 * v850-opc.c (v850_operands): Add flags field.
3398 (v850_opcodes): add move opcodes.
3400 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3402 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3403 * configure: (bfd_v850v_arch) Add new case.
3404 * configure.in: (bfd_v850_arch) Add new case.
3405 * v850-opc.c: New file.
3407 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3409 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3411 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3413 * d10v-opc.c: Add additional information to the opcode
3414 table to help determinine which instructions can be done
3417 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3419 * mpw-make.sed: Update editing of include pathnames to be
3422 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3424 * arm-opc.h: Added "bx" instruction definition.
3426 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3428 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3430 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3432 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3434 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3436 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3438 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3440 * makefile.vms: Update for alpha-opc changes.
3442 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3444 * i386-dis.c (print_insn_i386): Actually return the correct value.
3445 (ONE, OP_ONE): #ifdef out; not used.
3447 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3449 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3450 Changed subi operand type to treat 0 as 16.
3452 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3454 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3457 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3459 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3460 memory transfer instructions. Add new format string entries %h and %s.
3461 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3464 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3466 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3467 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3469 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * alpha-dis.c (print_insn_alpha_osf): Remove.
3472 (print_insn_alpha_vms): Remove.
3473 (print_insn_alpha): Make globally visible. Chose the register
3474 names based on info->flavour.
3475 * disassemble.c: Always return print_insn_alpha for the alpha.
3477 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3479 * d10v-dis.c (dis_long): Handle unknown opcodes.
3481 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3483 * d10v-opc.c: Changes to support signed and unsigned numbers.
3484 All instructions with the same name that have long and short forms
3485 now end in ".l" or ".s". Divs added.
3486 * d10v-dis.c: Changes to support signed and unsigned numbers.
3488 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3490 * d10v-dis.c: Change all functions to use info->print_address_func.
3492 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3494 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3495 move ccr/sr insns more strict so that the disassembler only
3496 selects them when the addressing mode is data register.
3498 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3499 * d10v-opc.c (pre_defined_registers): Declare.
3500 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3501 to pick a better name for the registers.
3503 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3505 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3506 operands for fexpand and fpmerge. From Christian Kuehnke
3507 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3509 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3511 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3512 print routine. Take new regnames and cpumask arguments.
3513 Kill the environment variable nonsense.
3514 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3515 (print_insn_alpha_vms): New function. Do VMS style regnames.
3516 * disassemble.c (disassembler): Test bfd flavour to pick
3517 between OSF and VMS routines. Default to OSF.
3519 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3521 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3522 * configure: Rebuild.
3523 * Makefile.in (install): Use @INSTALL_SHLIB@.
3525 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3527 * configure: (bfd_d10v_arch) Add new case.
3528 * configure.in: (bfd_d10v_arch) Add new case.
3529 * d10v-dis.c: New file.
3530 * d10v-opc.c: New file.
3531 * disassemble.c (disassembler) Add entry for d10v.
3533 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3535 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3536 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3538 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3540 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3541 distinguish between variants of the instruction set.
3542 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3543 distinguish between variants of the instruction set.
3545 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3547 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3548 the 8086 instruction set.
3549 * i386-dis.c: General cleanups. Make most things static. Add
3550 prototypes. Get rid of static variables aflags and dflags. Pass
3551 them as args (to almost everything).
3553 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3555 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3557 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3559 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3560 if the next arg is marked with SRC_IN_DST. Gross.
3562 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3563 we're looking for and find EXR.
3565 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3566 if we're looking for KBIT and we don't find it.
3568 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3571 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3572 3bit immediate operands.
3574 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * Released binutils 2.7.
3578 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3579 <kkaempf@progis.ac-net.de>.
3581 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3585 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3587 * sparc-dis.c (print_insn_sparclite): New routine to print
3588 sparclite instructions.
3590 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3592 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3594 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3596 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3597 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3598 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3600 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3602 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3603 Use autoconf-set values.
3604 (docdir, oldincludedir): Removed.
3605 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3607 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3609 * alpha-opc.c: New file.
3610 * alpha-opc.h: Remove.
3611 * alpha-dis.c: Complete rewrite to use new opcode table.
3612 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3613 * configure: Rebuild with autoconf 2.10.
3614 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3615 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3617 (alpha-opc.o): New target.
3619 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3621 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3622 Set imm_added_to_rs1 even if the source and destination register
3625 * sparc-opc.c: Add some two operand forms of the wr instruction.
3627 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3629 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3632 * disassemble.c (disassembler): Handle H8/S.
3633 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3635 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3637 * sparc-opc.c: Add beq/teq as aliases for be/te.
3639 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3640 <sergei@msil.sps.mot.com>.
3642 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3644 * makefile.vms: New file.
3646 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3648 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3650 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3653 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3655 * i386-dis.c (OP_OFF): Call append_prefix.
3657 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3659 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3660 unsigned long to silence a warning from the Solaris PowerPC
3663 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3665 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3667 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3669 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3671 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3672 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3673 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3674 cpush, cpusha, cpull sparclet insns.
3676 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3678 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3680 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3683 Set F_FLOAT on other floating point instructions.
3685 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3687 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3689 (powerpc_opcodes): Add 860/821 specific SPRs.
3691 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3693 * configure.in: Permit --enable-shared to specify a list of
3694 directories. Set and substitute BFD_PICLIST.
3695 * configure: Rebuild.
3696 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3697 uses. Set to @BFD_PICLIST@.
3699 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3701 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3702 not "abs", which may be needed for the absolute in something
3703 like btst #0,@10:8. Print L_3 immediates separately from other
3704 immediates. Change ABSMOV reference to ABS8MEM.
3706 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3708 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3709 (current_arch_mask): New static global.
3710 (compute_arch_mask): New static function.
3711 (print_insn_sparc): Delete sparc_v9_p. New static local
3712 current_mach. Resort opcode table if current_mach changes.
3713 Generalize "insn not supported" test.
3714 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3715 Delete test for v9/!v9.
3716 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3718 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3719 (brfcx): Renamed to FBRX.
3720 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3721 coprocessor mnemonics are not supported on the sparclet).
3722 (condf): Renamed to CONDF.
3723 (SLCBCC2): Delete F_ALIAS flag.
3725 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3727 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3728 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3730 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3732 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3733 that the shared library version number is set correctly.
3735 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3737 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3738 Miles Bader <miles@gnu.ai.mit.edu>.
3739 * configure: Rebuild.
3741 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3743 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3746 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3748 * configure: Rebuild with autoconf 2.8.
3750 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3752 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3753 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3755 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3757 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3758 since they appear as targets in Makefile.in.
3759 * configure: Rebuild.
3761 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3763 * mpw-make.sed: Edit out shared library support bits.
3765 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3767 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3768 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3769 (sparc_opcodes): Add sparclet insns.
3770 (sparclet_cpreg_table): New static local.
3771 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3772 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3774 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3776 * i386-dis.c (index16): New static variable.
3777 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3779 (OP_indirE): Return result of OP_E.
3780 (OP_E): Check for 16 bit addressing mode, and disassemble
3781 correctly. Optimised 32 bit case a little. Don't print
3782 "(base,index,scale)" when sib specifies only an offset.
3784 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3786 * configure.in: Set and substitute SHLIB_DEP.
3787 * configure: Rebuild.
3788 * Makefile.in (SHLIB_DEP): New variable.
3789 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3790 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3791 COMMON_SHLIB, add them to piclist with appropriate modifications.
3792 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3793 here: just use piclist.
3795 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3797 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3798 (print_insn_sparc): Rewrite v9/not-v9 tests.
3799 (compare_opcodes): Likewise.
3800 * sparc-opc.c (MASK_<ARCH>): Define.
3801 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3802 (sparclet,v6notv9): Define.
3803 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3804 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3806 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3808 * configure.in: Call AC_PROG_CC before configure.host.
3809 * configure: Rebuild.
3811 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3813 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3815 * i386-dis.c (onebyte_has_modrm): New static array.
3816 (twobyte_has_modrm): New static array.
3817 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3819 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3821 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3824 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3826 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3829 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3831 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3832 m68010up, not just m68020up | cpu32.
3834 * Makefile.in (SONAME): New variable.
3835 ($(SHLINK)): Make a link to the transformed name, as well.
3836 (stamp-tshlink): New target.
3837 (install): Skip stamp-tshlink during install.
3839 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3841 * configure.in: Call AC_ARG_PROGRAM.
3842 * configure: Rebuild.
3843 * Makefile.in (program_transform_name): New variable.
3844 (install): Transform library name before installing it.
3846 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3848 * i960-dis.c (mem): Add HX dcinva instruction.
3850 Support for building as a shared library, based on patches from
3851 Alan Modra <alan@spri.levels.unisa.edu.au>:
3852 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3853 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3854 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3855 * configure: Rebuild.
3856 * Makefile.in (ALLLIBS): New variable.
3857 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3858 (COMMON_SHLIB, SHLINK): New variables.
3859 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3860 (STAGESTUFF): Remove variable.
3861 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3862 (stamp-piclist, piclist): New targets.
3863 ($(SHLIB), $(SHLINK)): New targets.
3864 ($(OFILES)): Depend upon stamp-picdir.
3865 (disassemble.o): Build twice if PICFLAG is set.
3866 (MOSTLYCLEAN): Add pic/*.o.
3867 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3868 (distclean): Remove pic and stamp-picdir.
3869 (install): Install shared libraries.
3870 (stamp-picdir): New target.
3872 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3874 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3875 Print unknown instruction as "unknown", rather than in hex.
3877 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3879 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3881 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3883 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3885 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3888 when necessary. From Ulrich Drepper
3889 <drepper@myware.rz.uni-karlsruhe.de>.
3891 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3893 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3894 sparc_num_opcodes. Update architecture enum values.
3895 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3896 (sparc_opcode_lookup_arch): New function.
3897 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3898 (sparc_opcodes): Add v9a shutdown insn.
3900 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3902 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3903 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3905 (print_insn_sparc64): Deleted.
3906 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3909 * sparc-opc.c (architecture_pname): Add v9a.
3911 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3913 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3914 incorrectly defined as 0x16 when it should be 0x15.
3915 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3916 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3917 excb (exception barrier) which is defined in the Alpha
3918 Architecture Handbook version 2.
3919 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3920 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3921 disassembled as or, for example.
3923 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3925 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3926 (_print_insn_mips): Change i from int to unsigned int.
3928 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3930 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3931 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3933 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3935 * i386-dis.c: Added Pentium Pro instructions.
3937 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3939 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3942 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3944 * sh-opc.h (sh_nibble_type): Added REG_B.
3945 (sh_arg_type): Added A_REG_B.
3946 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3948 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3950 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3952 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3954 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3956 * Makefile.in (distclean): Remove stamp-h. From Ronald
3957 F. Guilmette <rfg@monkeys.com>.
3959 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3961 From David Mosberger-Tang <davidm@azstarnet.com>:
3962 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3965 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3967 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3968 (sh_table): Added many SH3 opcodes.
3969 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3971 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3973 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3974 (subco,subco.): Mark this PPC, not PPCCOM.
3976 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3978 * configure: Rebuild with autoconf 2.7.
3980 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3982 * configure: Rebuild with autoconf 2.6.
3984 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3986 * configure.in: Sort list of architectures. Accept but do nothing
3987 for alliant, convex, pyramid, romp, and tahoe.
3989 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * a29k-dis.c (print_special): Change num to unsigned int.
3993 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3995 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3998 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4000 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4001 * configure: Rebuilt.
4003 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4005 * configure.in: Add case for bfd_i860_arch.
4006 * configure: Rebuild.
4008 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4010 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4011 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4012 (NEXTDOUBLE): Likewise.
4013 (print_insn_m68k): Don't match fmoveml if there is more than one
4014 register in the list.
4015 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4017 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4019 * m68k-opc.c: Use #W rather than #w.
4020 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4022 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4024 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4025 and likewise for all the dbxx opcodes.
4027 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4029 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4031 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4033 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4034 the VR4100 specific instructions to the mips_opcodes structure.
4036 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4038 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4039 ugly Metrowerks bug in CW6, is fixed in CW7.
4041 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4043 * ppc-opc.c (whole file): Add flags for common/any support.
4045 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4047 * Makefile.in (BISON): Remove macro.
4048 (FLAGS_TO_PASS): Remove BISON.
4050 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4052 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4054 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4055 instructions that take no args by looking at the match mask.
4056 (print_insn_arg): Always print "%" before register names.
4057 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4058 [case '_']: Don't print "@#" before address.
4059 [case 'J']: Use "%s" as format string, not register name.
4060 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4062 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4064 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4067 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4069 From David Mosberger-Tang <davidm@azstarnet.com>
4071 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4072 (alpha_insn_set): added definitions for VAX floating point
4073 instructions (Unix compilers don't generate these, but handcoded
4074 assembly might still use them).
4076 * alpha-dis.c (print_insn_alpha): added support for disassembling
4077 the miscellaneous instructions in the Alpha instruction set.
4079 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4081 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4082 no longer create sysdep.h, sed ppc-opc.c to work around a
4083 serious Metrowerks C bug.
4084 * mpw-make.in: Remove.
4085 * mpw-make.sed: New file, used by mpw-configure to edit
4086 Makefile.in into an MPW makefile.
4088 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * Makefile.in (maintainer-clean): New synonym for realclean.
4092 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4095 which use '0', '1', and '2' instead. Specify the proper size for
4096 a pmove immediate operand. Correct the pmovefd patterns to be
4097 moves to a register, not from a register.
4098 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4100 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4102 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4103 %psr, %wim, %tbr as F_NOTV9.
4105 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4107 * Makefile.in (Makefile): Just rebuild Makefile when running
4109 (config.h, stamp-h): New targets.
4110 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4111 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4112 rebuilding config.h.
4113 * configure: Rebuild.
4115 * mips-opc.c: Change unaligned loads and stores with "t,A"
4116 operands to use "t,A(b)".
4118 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4120 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4122 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4124 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4125 until 3 instead of until 2.
4127 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4129 * Makefile.in (ALL_CFLAGS): Define.
4130 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4131 (MOSTLYCLEAN): Add config.log.
4132 (distclean): Don't remove config.log.
4133 * configure.in: Substitute HDEFINES.
4134 * configure: Rebuild.
4136 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4138 * sh-opc.h (sh_arg_type): Add F_FR0.
4139 (sh_table, case fmac): Add F_FR0 as first argument.
4141 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4143 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4145 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4147 * sparc-dis.c: Remove all references to NO_V9.
4149 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4151 * aclocal.m4: Just include ../bfd/aclocal.m4.
4152 * configure: Rebuild.
4154 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4156 * sparc-dis.c (X_DISP19): Define.
4157 (print_insn, case 'G'): Use it.
4158 (print_insn, case 'L'): Sign extend displacement.
4160 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4162 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4163 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4164 host_makefile_frag or frags.
4165 * aclocal.m4: New file.
4166 * configure: Rebuild.
4167 * Makefile.in (INSTALL): Set to @INSTALL@.
4168 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4169 (INSTALL_DATA): Set to @INSTALL_DATA@.
4171 (AR_FLAGS): Set to rc rather than qc.
4172 (CC): Define as @CC@.
4173 (CFLAGS): Set to @CFLAGS@.
4174 (@host_makefile_frag@): Remove.
4175 (config.status): Remove dependency upon @frags@.
4177 * configure.in: ../bfd/config.bfd now just sets shell variables.
4178 Use them rather than looking through target Makefile fragments.
4179 * configure: Rebuild.
4181 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4183 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4185 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4187 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4188 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4191 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4192 (lookup_{name,value}): New functions.
4193 (prefetch_table): New static local.
4194 (sparc_{encode,decode}_prefetch): New functions.
4195 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4197 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4202 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4204 * sh-dis.c: Correct comment on first line of file.
4206 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4208 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4210 * sparc-opc.c (asi, membar): New static locals.
4211 (sparc_{encode,decode}_{asi,membar}): New functions.
4212 (sparc_opcodes, membar insn): Fix.
4213 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4214 Support decoding of membar masks.
4217 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4219 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4221 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4223 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4224 and likewise for the other branches. Add bhs as an alias for bcc,
4225 and likewise for the size variants. Add dbhs as an alias for
4228 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4230 * sh-opc.h (FP sts instructions): Update to match reality.
4232 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4234 * m68k-dis.c: (fpcr_names): Add % before all register names.
4235 (reg_names): Likewise.
4236 (print_insn_arg): Don't explicitly print % before register names.
4237 Add % before register names in static array names. In case 'r',
4238 print data registers as `@(Dn)', not `Dn@'. When printing a
4239 memory address, don't print @# before it.
4240 (print_indexed): Change base_disp and outer_disp from int to
4241 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4242 syntax. Sign extend 8 byte displacement correctly.
4243 (print_base): Print using MIT syntax. Print zpc when appropriate.
4244 Change parameter disp from int to bfd_vma.
4246 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4249 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4251 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4252 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4253 * sh-opc.h (sh_arg_type): Add new operand types.
4254 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4256 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4258 * Makefile.in (distclean): Remove generated file config.h.
4260 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4262 * Makefile.in (distclean): Remove generated file config.h.
4264 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4266 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4268 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4270 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4271 rather than numopcodes. Use m68k_opcodes rather than removed
4272 opcode function. Don't check F_ALIAS.
4273 (print_insn_arg): Change first parameter to be const char *.
4274 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4275 (m68k-opc.o): New target.
4276 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4277 * configure: Rebuild.
4279 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4281 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4282 (opcode_bits, opcode_hash_table): New variables.
4283 (opcodes_initialized): Renamed from opcodes_sorted.
4284 (build_hash_table): New function.
4285 (is_delayed_branch): Use hash table.
4286 (print_insn): Renamed from print_insn_sparc, made static.
4287 Build and use hash table. If !sparc64, ignore sparc64 insns,
4288 and vice-versa if sparc64.
4289 (print_insn_sparc, print_insn_sparc64): New functions.
4290 (compare_opcodes): Move sparc64 opcodes to end.
4291 Print commutative insns with constant second.
4292 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4294 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4296 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4297 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4298 avoids printing a delay slot in a delay slot.
4299 * sh-opc.h (sh_table): Fully bracket last entry.
4301 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4303 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4305 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4307 * configure.in: Get host_makefile_frag from ${srcdir}.
4309 * configure.in: Autoconfiscated. Check for string[s].h. Create
4310 config.h from config.in. Don't set up sysdep.h link.
4311 * sysdep.h: New file.
4312 * configure, config.in: New files, generated from configure.in.
4313 * Makefile.in: Updated to be processed autoconf-style.
4314 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4315 (Makefile): Depend on config.status.
4316 (config.status): New rule.
4317 * configure.bat: Update Makefile substitutions.
4319 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4321 * mips-opc.c (L1): Define.
4322 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4323 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4326 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4328 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4329 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4330 have multiple add units but only a single logical unit.
4332 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4333 shifted by 18, without any insertion or extraction function.
4334 (insert_cr, extract_cr): Remove.
4336 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4338 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4341 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4343 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4344 * sh-opc.h: Add copyright.
4346 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4348 * Makefile.in (crunch-m68k): Delete extra target accidentally
4349 checked in a while ago.
4351 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4353 * sh-opc.h (sh_table): Add SH3 support.
4355 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4357 * sh-opc.h: Added bsrf and braf.
4359 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4361 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4362 bogus [ls]fm{ea,fd} patterns.
4364 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4365 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4366 initialize it from memory. Make function static.
4367 (print_insn_{big,little}_arm): New functions.
4368 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4369 the correct endianness.
4371 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4373 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4376 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4378 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4379 17th, so that it builds again using GCC as the compiler.
4381 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4383 * mips-dis.c (print_insn_little_mips): Cast return value from
4384 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4385 expects an unsigned long, and that might be fewer words of
4386 argument storage (e.g., if bfd_vma is long long on a 32-bit
4388 (print_insn_big_mips): Likewise with bfd_getb32 value.
4389 (_print_insn_mips): Now static.
4391 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4393 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4394 gcc memory hog problem with initializer is fixed.
4396 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4398 Merge in support for Mac MPW as a host.
4399 (Old change descriptions retained for informational value.)
4401 * mpw-config.in (archname): Compute from the config.
4402 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4404 * mpw-config.in (target_arch): Compute from canonical target.
4405 (m68k, mips, powerpc, sparc): Add architectures.
4406 * mpw-make.in (disassemble.c.o): Add.
4407 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4409 * mpw-config.in (BFD_MACHINES): Set to a default value.
4410 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4412 * mpw-make.in (CSEARCH): Add extra-include to search path.
4414 * mpw-config.in (varargs.h): Don't create.
4415 (sysdep.h): Create using forward-include.
4416 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4418 * mpw-config.in: New file, MPW version of configure.in.
4419 * mpw-make.in: New file, MPW version of Makefile.in.
4421 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4423 * alpha-dis.c (print_insn_alpha): Put empty statement after
4426 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4428 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4429 (low_sign_extend): Likewise.
4430 (get_field): Delete unused function.
4431 (set_field, deposit_14, deposit_21): Likewise.
4433 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4435 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4438 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4440 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4442 * alpha-opc.h (OSF_ASMCODE): define
4443 print pal-code names as defined in App C of the
4444 Alpha Architecture Reference Manual
4446 * alpha-dis.c: cleaned up output
4447 print stylized code forms as defined in App A.4.3 of the
4448 Alpha Architecture Reference Manual
4450 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4452 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4454 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4457 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4459 * m68k-dis.c (opcode): New function. Returns address of opcode
4460 table entry given index, even if the opcode table was split to
4461 work around gcc bugs.
4462 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4464 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4465 (reg_names): Now const.
4466 (print_insn_arg): Arrays cacheFieldName and names now const.
4467 (print_indexed): Array scales now const.
4469 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4471 * ppc-opc.c: Sort recently added instructions by minor opcode
4472 number within major opcode number.
4474 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4476 * hppa-dis.c: Include libhppa.h.
4478 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4480 * mips-opc.c: Change dli to use M_DLI, and add dla.
4482 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4484 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4486 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4488 * mips-opc.c: Add r4650 mul instruction.
4490 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4492 * mips-opc.c: Add uld and usd macros for unaligned double load and
4495 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4497 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4498 mfdcr, mtdcr, icbt, iccci.
4500 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4502 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4503 signed char fields to shorts, more portable.
4505 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4507 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4508 char fields as signed chars, since they may have negative values.
4510 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4512 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4513 (mycroft@netbsd.org).
4515 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4517 From "Logg, Ed" <elogg@ea.com>:
4518 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4519 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4522 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4524 * ppc-opc.c: Changes based on patch from David Edelsohn
4525 <edelsohn@mhpcc.edu>.
4526 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4529 (insert_tbr): New static function.
4530 (extract_tbr): New static function.
4531 (XFXFXM_MASK, XFXM): Define.
4532 (XSPRBAT_MASK, XSPRG_MASK): Define.
4533 (powerpc_opcodes): Add instructions to access special registers by
4534 name. Add mtcr and mftbu.
4536 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4538 * mips-opc.c (P3): Define.
4539 (mips_opcodes): Add mad and madu.
4541 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4543 * configure.in: Add W65 support.
4544 * disassemble.c: Likewise.
4545 * w65-opc.h, w65-dis.c: New files.
4547 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4549 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4552 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4554 * mips-opc.c: Add dli as a synonym for li.
4556 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4558 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4559 print something for reserved opcode values, even if it won't
4562 * mips-dis.c (_print_insn_mips): When initializing, shift right
4563 and mask, to avoid sign extension problems on the Alpha.
4565 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4568 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4570 * sh-opc.h (mov.l gbr): Get direction right.
4571 * sh-dis.c (print_insn_shx): New function.
4572 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4573 print opcodes with right byte order.
4575 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4577 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4578 to avoid conflicts with getopt.
4580 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4582 * hppa-dis.c (print_insn_hppa): Read the instruction using
4583 bfd_getb32, so that it works on a little endian or 64 bit host.
4584 Remove unused local variable op.
4586 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4588 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4589 addu does not work correctly if -mips3.
4591 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4593 * a29k-dis.c (print_special): Add special register names defined
4594 on 29030, 29040 and 29050.
4595 (print_insn): Handle new operand type 'I'.
4597 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4599 * Makefile.in (INSTALL): Use top level install.sh script.
4601 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4603 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4604 that it works on a little endian host.
4606 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4608 * configure.in: Use ${config_shell} when running config.bfd.
4610 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4612 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4614 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4616 * a29k-dis.c (print_insn): Print the opcode.
4618 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4620 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4622 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4624 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4626 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4628 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4629 which store a value into memory.
4631 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4633 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4634 * arm-dis.c, arm-opc.h: New files.
4636 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4638 * Makefile.in (ns32k-dis.o): Add dependency.
4639 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4640 string, not as array of chars.
4642 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4644 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4646 * sparc-opc.c: Added sparclite extended FP operations, and
4647 versions of v9 impdep* instructions permitting specification of
4650 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4652 * i960-dis.c (reg_names): Now const.
4653 (struct sparse_tabent): New type, copied from array type in mem
4655 (ctrl): Local static array ctrl_tab now const.
4656 (cobr): Local static array cobr_tab now const.
4657 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4658 static variable mem_tab no longer explicitly initialized. Changed
4659 mem_init to const array of struct sparse_tabent.
4660 (reg): Local static variable reg_tab no longer explicitly
4661 initialized. Changed reg_init to const array of struct
4663 (ea): Local static array scale_tab now const.
4665 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4668 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4670 * configure.bat: the disassember needs to be enabled for
4671 "objdump -d" to work in djgpp.
4673 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4675 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4676 (invalid_float): Enabled general version, doesn't require running
4677 on ns32k host. Changed to take char* argument, and test for
4678 explicitly specified sizes, instead of using sizeof() on host CPU
4680 (INVALID_FLOAT): Cast first argument.
4681 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4682 list_P032, list_M032): Now const.
4683 (optlist, list_search): Made appropriate arguments now point to
4685 (print_insn_arg): Changed static array of one-character-string
4686 pointers into a static const array of characters; fixed sprintf
4687 statement accordingly.
4689 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4691 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4692 from distribution. A ns32k-dis.c from a previous distribution has
4693 been brought up to date and supports the new interface.
4695 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4697 * configure.in: add bfd_ns32k_arch target support.
4699 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4700 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4702 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4704 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4707 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4709 * h8300-dis.c, mips-dis.c: Don't use true and false.
4711 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4713 * configure.in: Change --with-targets to --enable-targets.
4715 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4717 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4718 opcodes to the first instruction with that opcode, to speed
4719 disassembly of large files. From ralphc@pyramid.com (Ralph
4722 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4724 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4726 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4728 * configure.bat: update to latest makefile.in
4730 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4732 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4733 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4734 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4735 slot insn is in a delay slot.
4736 * z8k-opc.h: (resflg): Fix patterns.
4737 * h8500-opc.h Fix CR insn patterns.
4739 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4742 "cmpl" before POWER versions, so that gas -many uses them.
4744 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4746 * disassemble.c: New file.
4747 * Makefile.in (OFILES): Add disassemble.o.
4748 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4749 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4750 binutils/configure.in.
4752 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4753 opcode being examined.
4755 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4757 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4758 (insert_ral, insert_ram, insert_ras): New functions.
4759 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4760 RAS for store with update.
4762 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4765 (edelsohn@npac.syr.edu).
4767 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4772 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4774 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4776 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * ppc-opc.c (powerpc_operands): The signedp field has been
4779 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4780 instead. Add new operand SISIGNOPT.
4781 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4782 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4783 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4786 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4788 * i386-dis.c (struct private): Renamed to dis_private. `private'
4789 is a reserved word for dynix cc.
4791 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * configure.in: Change error message to refer to bfd/config.bfd
4794 rather than bfd/configure.in.
4796 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4798 * ppc-opc.c: Define POWER2 as short alias flag.
4799 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4802 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * i960-dis.c (print_insn_i960): Don't read a second word for
4805 opcodes 0, 1, 2 and 3.
4807 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4811 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4813 * m68881-ext.c: Removed; no longer used.
4814 * Makefile.in: Changed accordingly.
4816 * m68k-dis.c (ext_format_68881): Don't declare.
4817 (print_insn_m68k): If an instruction uses place 'i', it uses at
4818 least four fixed bytes.
4819 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4820 extended float, convert to double using floatformat_to_double, not
4821 ieee_extended_to_double, and fetch the data before converting it.
4823 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4826 davidj@ICSI.Berkeley.EDU (David Johnson).
4828 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4831 PowerPC uses bdnz[l][a].
4833 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4835 * dis-buf.c, i386-dis.c: Include sysdep.h.
4837 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4841 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4842 by Motorola PowerPC 601 with PPC_OPCODE_601.
4843 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4844 Disassemble Motorola PowerPC 601 instructions as well as normal
4845 PowerPC instructions.
4847 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4849 * i960-dis.c (reg, mem): Just use a static array instead of
4852 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4854 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4855 condition name index if this is for a negated condition.
4857 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4858 Floating point format for 'H' operand is backwards from normal
4859 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4860 operands (fmpyadd and fmpysub), handle bizarre register
4861 translation correctly for single precision format.
4863 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4864 or 'I' operands if the next format specifier is 'M' (fcmp
4865 condition completer).
4867 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4870 single number giving a bitmask for the MB and ME fields of an M
4871 form instruction. Change NB to accept 32, and turn it into 0;
4872 also turn 0 into 32 when disassembling. Seperated SH from NB.
4873 (insert_mbe, extract_mbe): New functions.
4874 (insert_nb, extract_nb): New functions.
4875 (SC_MASK): Mask out SA and LK bits.
4876 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4877 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4878 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4879 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4880 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4881 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4882 (powerpc_macros): Define table of macro definitions.
4883 (powerpc_num_macros): Define.
4885 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4886 if PPC_OPERAND_NEXT is set.
4888 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4891 char. Retrieve contents using bfd_getl32 instead of shifting.
4893 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4895 * ppc-opc.c: New file. Opcode table for PowerPC, including
4896 opcodes for POWER (RS/6000).
4897 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4898 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4899 (CFILES): Add ppc-dis.c.
4900 (ppc-dis.o, ppc-opc.o): New targets.
4901 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4903 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4905 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4906 No space before 'u', 'f', or 'N'.
4908 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4910 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4911 farther than we should.
4913 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4915 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4917 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4919 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4921 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4922 needs it, to prevent reading past the end of a section.
4924 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4927 Removed t,A case for la; always use t,A(b) case.
4929 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4931 From Ted Lemen <mellon@pepper.ncd.com>
4932 * mips-dis.c (print_insn_arg): Handle 'k'.
4933 * mips-opc.c: Make cache use k, not t.
4935 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4937 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4938 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4939 FLOAT_FORMAT_CODE to put out floating point register names.
4941 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4943 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4945 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4947 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4949 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4951 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4952 larger than 32. Moved dsxx32 variants first for disassembler.
4954 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4956 * z8kgen.c, z8k-opc.h: Add full lda information.
4958 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4960 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4961 movb instructions. Any necessary space will be emitted by
4962 the code to handle nullification completers.
4964 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4966 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4968 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4970 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4971 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4973 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4975 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4977 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4979 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4980 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4982 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4984 * m88k-dis.c (m88kdis): comment change. Remove space after
4986 (printop): handle new arg types DEC and XREG for m88110.
4988 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4990 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4991 type for absolute branch addresses. Delete special
4992 "ble" and "be" code in 'W' operand code.
4994 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4996 * mips-opc.c: Set hazard information correctly for branch
4997 likely instructions.
4999 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5001 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5002 info->fprintf_func for printing and info->print_address_func for
5005 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5007 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5009 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5011 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5012 Corrected second case of "b" for disassembler.
5014 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5016 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5017 to BFD swapping routines to correspond to BFD name changes.
5019 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5021 * mips-opc.c: Change div machine instruction to be z,s,t rather
5022 than s,t. Change div macro to be d,v,t rather than d,s,t.
5023 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5024 rem and remu which generates only the corresponding div
5025 instruction. This is for compatibility with the MIPS assembler,
5026 which only generates the simple machine instruction when an
5027 explicit destination of $0 is used.
5028 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5030 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5032 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5033 WR_31 hazard for bal, bgezal, bltzal.
5035 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5037 * hppa-dis.c (print_insn_hppa): Use print function
5038 from within the disassemble_info, not fprintf_filtered.
5040 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5042 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5043 Law, law@cs.utah.edu.)
5045 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5047 * mips-opc.c ("absu"): Removed.
5050 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5052 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5053 Changed hazard information to distinguish between memory load
5054 delays and coprocessor load delays.
5056 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5058 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5060 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5062 * configure.in: Don't pass cpu to config.bfd.
5064 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5066 * m88k-dis.c (m88kdis): Make class unsigned.
5068 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5070 * alpha-dis.c (print_insn_alpha): One branch format case was
5071 missing the instruction name.
5073 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5075 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5076 Add the arch-specific auxiliary files.
5077 (OFILES): Remove the arch-specific auxiliary files
5078 and use BFD_MACHINES instead of DIS_LIBS.
5079 * configure.in: Set BFD_MACHINES based on --with-targets option.
5081 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5083 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5086 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5088 * sparc-opc.c: Change CONST to const to deal with gcc
5089 -Dconst=__const -traditional.
5091 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5093 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5094 coprocessor instructions out of #if 0, and made them use new
5097 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5099 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5101 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5103 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5104 instruction, for use by the disassembler.
5106 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5107 hand-coded sign extensions that depended on 32-bit host ints.
5108 FIXME, we still depend on big-endian host bitfield ordering.
5109 (sparc_print_insn): Set the insn_info_valid field, and the
5110 other fields that describe the instruction being printed.
5112 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5114 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5115 `jmp' instead of just one of them.
5117 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5119 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5120 (fput_fp_reg_r): Renamed from fput_reg_r.
5121 (fput_fp_reg): New function.
5122 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5124 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5126 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5128 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5130 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5132 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5133 don't output a space.
5135 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5137 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5139 * mips-opc.c: New file, containing opcode table from
5140 ../include/opcode/mips.h.
5141 * Makefile.in: Add it.
5143 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5145 * m88k-dis.c: New file, moved in from gdb and changed to use the
5146 new dis-asm.h disassembler interface.
5147 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5148 (m88k-dis.o): New target.
5150 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5152 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5153 argument string const char * to correspond to opcode/mips.h.
5155 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5157 * mips-dis.c: Updated to account for name changes in new version
5159 * Makefile.in: Added header file dependencies.
5161 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5163 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5165 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5167 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5168 extend, rather than shifts.
5170 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5172 * Makefile.in: Undo 15 June change.
5174 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5176 * m68k-dis.c (print_insn_arg): Change return value to byte count
5178 * m68k-dis.c: Re-write to detect invalid operands before
5179 printing anything, so we can handle this the same way we
5180 handle invalid opcodes.
5182 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5184 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5186 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5188 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5191 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5193 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5195 * configure.in: Do make sysdep.h link.
5196 * Makefile.in: Search ../include. Don't search ../bfd.
5198 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5200 Changes from Jeff Law, law@cs.utah.edu:
5201 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5202 Do not print a space before the completers specified by
5205 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5207 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5208 defined, since gdb has been fixed.
5210 Changes from Jeff Law, law@cs.utah.edu:
5211 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5212 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5213 be a *disassemble_info, not a *FILE.
5214 * hppa-dis.c: Support 'd', '!', and 'a'.
5215 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5216 * hppa-dis.c: Delete cases which are no longer needed.
5218 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5220 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5222 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5224 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5227 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5229 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5230 * configure.in: No longer need to configure to get sysdep.h.
5232 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5234 * Patches from Jeffrey Law <law@cs.utah.edu>.
5235 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5236 templates for 1.1 FP computational instructions.
5238 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5240 * h8500-dis.c (print_insn_h8500): Address argument is type
5242 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5245 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5246 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5248 * sparc-dis.c (compare_opcodes): Move static declaration to
5251 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5253 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5254 instruction, remove unimp hack from 'l' argument.
5256 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5258 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5261 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5263 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5264 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5267 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5269 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5270 arrays of string pointers to 2-d arrays of chars, to save
5273 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5275 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5276 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5278 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5280 * hppa-dis.c: New file from Utah, adapted to new disassembler
5282 * Makefile.in: Include it.
5284 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5286 * sh-dis.c, sh-opc.h: New files.
5288 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5290 * alpha-dis.c, alpha-opc.h: New files.
5292 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5294 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5297 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5299 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5301 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5303 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5306 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5308 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5309 and double percent signs a few places.
5311 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5313 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5314 Use info->print_address_func not print_address.
5316 * dis-buf.c (generic_print_address): New function.
5318 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5320 * Makefile.in: Add sparc-dis.c.
5321 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5323 Add `add' instruction to the set that get checked
5324 for a preceding `sethi' in order to print an absolute address.
5325 * (print_insn): Disassembly prefers real instructions.
5326 (is_delayed_branch): Speed up.
5327 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5328 Still missing some float ops, and needs testing.
5329 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5330 F_ALIAS. Use printf, not fprintf, when not passing a file
5332 (compare_opcodes): Check that identical instructions have
5333 identical opcodes, complain otherwise.
5336 * Include reg_names.
5338 Use dis-asm.h/read_memory_func interface.
5340 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5342 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5343 deliberately return non-zero to setjmp from longjmp. Otherwise
5344 this code fails to compile.
5346 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5348 * m68k-dis.c: Fix prototype for fetch_arg().
5350 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5352 * dis-buf.c: New file, for new read_memory_func interface.
5353 Makefile.in (OFILES): Include it.
5354 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5355 Use new read_memory_func interface.
5357 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5359 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5360 * h8500-opc.h: Fix couple of opcodes.
5362 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5364 * Makefile.in: add dvi & installcheck targets
5366 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5368 * Makefile.in: Update for h8500-dis.c.
5370 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5372 * h8500-dis.c, h8500-opc.h: New files
5374 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5376 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5377 ../include/dis-asm.h.
5378 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5379 and ../gdb/m68k-pinsn.c).
5380 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5381 and ../gdb/i386-pinsn.c).
5382 * m68881-ext.c: New file. Moved definition of
5383 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5384 * Makefile.in: Adjust for new files.
5385 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5386 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5387 can be dis-assembled.
5389 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5391 * mips-dis.c (print_insn_arg): Now returns void.
5393 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5395 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5396 files that use the macros.
5398 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5400 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5401 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5402 (CFILES): Added mips-dis.c.
5404 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5406 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5407 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5409 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5411 * Makefile.in: Improve *clean rules.
5412 * configure.in: Allow a default host.
5414 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5416 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5417 files include other sysdep files
5419 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5421 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5423 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5425 * configure.in: For host support, use ../bfd/configure.host
5426 so it stays in sync with the ../bfd/hosts database.
5428 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5430 * configure.in: use cpu-vendor-os triple instead of nested cases
5432 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5434 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5435 *always* the wrong one.
5437 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5439 * z8kgen.c: added copyright info
5441 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5443 * z8k-dis.c (unparse_instr): prettier tabs
5444 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5446 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5448 * configure.in: Add ncr* configuration.
5449 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5450 picayune ANSI compilers happy.
5452 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5454 * configure.in (i386): Make i386 and i486 synonymous for now.
5455 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5457 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5459 * Makefile.in (install): Fix typo.
5461 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5463 * Makefile.in (make): Remove obsolete crud.
5464 (sparc-opc.o): Avoid Sun Make VPATH bug.
5466 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5468 * Makefile.in: since there are no SUBDIRS, remove rule and
5469 references of subdir_do.
5471 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5473 * Makefile.in (install): Get the library name right here too.
5474 Don't install bfd.h, since it's unrelated to this library. No
5475 subdirs to recurse into, either.
5476 (CFILES): The source file has a .c suffix, not .o.
5478 * sparc-opc.c: New file, moved from BFD.
5479 * Makefile.in (OFILES): Build it.
5481 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5483 * z8k-dis.c: fixed forward refferences of some declarations.
5485 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5487 * Makefile.in: get the name of the library right
5489 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5491 * z8k-dis.c: knows how to disassemble z8k stuff
5492 * z8k-opc.h: new file full of z8000 opcodes
5496 version-control: never