1 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
5 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
7 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
9 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
11 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
13 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
16 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
18 * hppa-dis.c: (print_insn_hppa): Add missing break after
21 * hppa-dis.c: Finish constifying various completers, register
24 1999-09-14 Michael Meissner <meissner@cygnus.com>
26 * configure.in (Canonicalization of target names): Remove adding
27 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
28 generates $ac_config_sub with a ${CONFIG_SHELL} already.
29 * configure: Regenerate.
31 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
33 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
35 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
37 1999-09-07 Nick Clifton <nickc@cygnus.com>
39 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
40 names for the mulu and muls patterns.
42 1999-09-04 Steve Chamberlain <sac@pobox.com>
46 * disassemble.c (disassembler): Handle bfd_arch_pj.
47 * configure.in: Handle bfd_pj_arch.
48 * Makefile.am: Rebuild dependencies.
49 (CFILES): Add pj-dis.c and pj-opc.c.
50 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
51 * configure, Makefile.in: Rebuild.
53 1999-09-04 H.J. Lu <hjl@gnu.org>
55 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
57 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
59 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
61 1999-08-04 Doug Evans <devans@casey.cygnus.com>
63 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
64 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
65 * m32r-opinst.c: Rebuild.
67 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
69 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
72 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
74 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
75 extract_10U_store): New.
76 (print_insn_hppa): Add new completers.
78 * hppa-dis.c (signed_unsigned_names,mix_half_names,
79 saturation_names): New.
80 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
82 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
84 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
86 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
87 to decide to print a space.
89 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
91 * i386-dis.c: Add AMD athlon instruction support.
93 1999-08-10 Ian Lance Taylor <ian@zembu.com>
95 From Wally Iimura <iimura@microunity.com>:
96 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
97 overflow at end of address space.
98 (generic_print_address): Use sprintf_vma.
100 1999-08-08 Ian Lance Taylor <ian@zembu.com>
102 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
103 MKDEP. Rebuild dependencies.
104 * Makefile.in: Rebuild.
106 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
108 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
109 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
110 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
111 (print_insn_hppa): Add 64 bit condition completers.
113 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
115 * hppa-dis.c (print_insn_hppa): Change condition args to use
118 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
120 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
123 1999-07-21 Ian Lance Taylor <ian@zembu.com>
126 * configure.bat: Remove; obsolete.
128 1999-07-11 Ian Lance Taylor <ian@zembu.com>
130 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
131 (generic_strcat_address): Add cast to avoid warning.
132 * i386-dis.c: Initialize all structure fields to avoid warnings.
133 Add ATTRIBUTE_UNUSED as appropriate.
135 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
137 * sparc-dis.c (print_insn_sparc): Differentiate between
138 addition and oring when guessing symbol for comment.
140 1999-07-05 Nick Clifton <nickc@cygnus.com>
142 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
145 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
147 * i386-dis.c: Mention intel mode specials in macro char comment.
149 1999-06-21 Ian Lance Taylor <ian@zembu.com>
151 * alpha-dis.c: Don't include <stdlib.h>.
152 * arm-dis.c: Include "sysdep.h".
153 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
155 * Makefile.am: Rebuild dependencies.
156 * Makefile.in: Rebuild.
158 1999-06-16 Nick Clifton <nickc@cygnus.com>
160 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
163 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
165 * arm-dis.c (arm_regnames): Turn into a pointer to a register
167 (arm_regnames_standard): New variable: Array of ARM register
168 names according to ARM instruction set nomenclature.
169 (arm_regnames_apcs): New variable: Array of ARM register names
170 according to ARM Procedure Call Standard.
171 (arm_regnames_raw): New variable: Array of ARM register names
172 using just 'r' and the register number.
173 (arm_toggle_regnames): New function: Toggle the chosen register set
175 (parse_disassembler_options): New function: Parse any target
176 disassembler command line options.
177 (print_insn_big_arm): Call parse_disassembler_options if any
179 (print_insn_little_arm): Call parse_disassembler_options if any
182 1999-06-13 Ian Lance Taylor <ian@zembu.com>
184 * i386-dis.c (FWAIT_OPCODE): Define.
185 (used_prefixes): New static variable.
186 (fetch_data): Don't print an error message if we have already
187 fetched some bytes successfully.
188 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
189 (prefix_name): New static function.
190 (print_insn_i386): If setjmp fails, indicating a data error, but
191 we have managed to fetch some bytes, print the first one as a
192 prefix or a .byte pseudo-op. If fwait is followed by a non
193 floating point instruction, print the first prefix. Set
194 used_prefixes when prefixes are used. If any prefixes were not
195 used after disassembling the instruction, print the first prefix
196 instead of printing the instruction.
197 (putop): Set used_prefixes when prefixes are used.
198 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
199 (OP_DIR, OP_SIMD_Suffix): Likewise.
201 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
203 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
204 Support signx %reg, clruw %reg.
206 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
208 * sparc-opc.c: Add aliases Solaris as supports.
210 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
212 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
213 * Makefile.in: Regenerated.
215 1999-06-03 Philip Blundell <philb@gnu.org>
217 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
218 when target is PC-relative.
220 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
222 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
225 * m68k-dis.c (fetch_arg): Add places `n', `o'.
227 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
228 Add mcf5206e to appropriate instructions.
229 Add alias for MAC, MSAC.
231 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
234 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
235 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
237 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
239 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
241 * i386-dis.c (Ed): Define.
242 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
244 (OP_rm): Rename to OP_Rd.
247 (putop): Add const to template and p.
248 (print_insn_x86): Delete.
249 (print_insn_i386): Merge old function print_insn_x86. Add const
251 (struct dis386): Add const to name.
252 (dis386_att, dis386_intel): Add const.
253 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
254 (names32, names16, names8, names_seg, index16): Add const.
255 (grps, prefix_user_table, float_reg): Add const.
256 (float_mem_att, float_mem_intel): Add const.
257 (oappend): Add const to s.
258 (OP_REG): Add const to s.
259 (ptr_reg): Add const to s.
260 (dofloat): Add const to dp.
261 (OP_C): Don't skip modrm, it's now done in OP_Rd.
264 (OP_Rd): Check for valid mod. Call Op_E to print.
265 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
266 (OP_MS): Check for valid mod. Call Op_EM to print.
267 (OP_3DNowSuffix): Set obufp and use oappend rather than
268 strcat. Call BadOp() for errors.
269 (OP_SIMD_Suffix): Likewise.
270 (BadOp): New function.
272 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
274 * i386-dis.c (dis386_intel): Remove macro chars, except for
275 jEcxz. Change cWtR and cRtd to cW and cR.
276 (dis386_twobyte_intel): Remove macro chars here too.
277 (putop): Handle R and W macros for intel mode.
279 * i386-dis.c (SIMD_Fixup): New function.
280 (dis386_twobyte_att): Use it on movlps and movhps, and change
281 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
282 (dis386_twobyte_intel): Same here.
284 * i386-dis.c (Av): Remove.
288 (OP_SIMD_Suffix): New function.
289 (OP_DIR): Remove dead code.
290 (eAX_reg..eDI_reg): Renumber.
291 (onebyte_has_modrm): Table numbering comments.
292 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
293 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
294 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
295 and handle SIMD cmp insns in OP_SIMD_Suffix.
296 (info->bytes_per_line): Bump from 5 to 6.
298 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
299 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
301 PIII SIMD support from Doug Ledford <dledford@redhat.com>
302 * i386-dis.c (XM, EX, None): Define.
303 (OP_XMM, OP_EX, OP_None): New functions.
304 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
305 (GRP14): Rename to GRPAMD.
306 (GRP*): Add USE_GROUPS flag.
308 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
309 (twobyte_has_modrm): Add SIMD entries.
310 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
311 (grps): Add SIMD insns.
312 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
313 oappend repz if uses_f3_prefix. Add code to handle new groups for
316 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
317 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
318 operand from Av to Jv.
320 1999-05-07 Nick Clifton <nickc@cygnus.com>
322 * mcore-dis.c (print_insn_mcore): Use .short to display
323 unidentified instructions, not .word.
325 1999-04-26 Tom Tromey <tromey@cygnus.com>
327 * aclocal.m4, configure: Updated for new version of libtool.
329 1999-04-14 Doug Evans <devans@casey.cygnus.com>
331 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
332 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
334 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
336 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
339 1999-04-10 Doug Evans <devans@casey.cygnus.com>
341 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
342 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
344 1999-04-06 Ian Lance Taylor <ian@zembu.com>
346 * opintl.h (LC_MESSAGES): Never define.
348 1999-04-04 Ian Lance Taylor <ian@zembu.com>
350 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
351 (separator_char, scale_char): Likewise.
352 (print_insn_x86): Likewise.
353 (print_insn_i386): Likewise. Add declaration.
355 1999-03-26 Doug Evans <devans@casey.cygnus.com>
357 * fr30-dis.c: Rebuild.
358 * m32r-dis.c: Rebuild.
360 1999-03-23 Ian Lance Taylor <ian@zembu.com>
362 * m68k-opc.c: Change compare instructions to use "@s" rather than
363 ";s" when used with an immediate operand.
365 1999-03-22 Doug Evans <devans@casey.cygnus.com>
367 * cgen-opc.c (cgen_set_cpu): Delete.
368 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
369 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
371 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
373 * po/opcodes.pot: Rebuild.
375 1999-03-16 Martin Hunt <hunt@cygnus.com>
377 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
379 1999-03-11 Doug Evans <devans@casey.cygnus.com>
381 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
382 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
383 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
384 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
385 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
386 * m32r-opinst.c: Rebuild.
388 1999-02-25 Doug Evans <devans@casey.cygnus.com>
390 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
391 (cgen_hw_lookup_by_num): Rewrite.
392 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
393 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
394 * m32r-opinst.c: Rebuild.
396 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
398 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
399 (insert_jhint): Fix insertion mask.
400 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
402 1999-02-10 Doug Evans <devans@casey.cygnus.com>
404 * Makefile.in: Rebuild.
406 1999-02-09 Doug Evans <devans@casey.cygnus.com>
408 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
409 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
410 * Makefile.am: Remove references to them.
411 (HFILES): Add fr30-desc.h,m32r-desc.h.
412 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
414 (ALL_MACHINES): Update.
415 * configure.in: Redo handling of cgen_files.
416 (bfd_i960_arch): Delete i960c-*.lo files.
417 * configure: Regenerate.
418 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
419 (hash_insn_array): Rewrite.
420 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
421 (hash_insn_array): Rewrite.
422 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
423 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
424 (cgen_lookup_get_insn_operands): Ditto.
425 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
426 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
427 * po/POTFILES.in: Rebuild.
428 * po/opcodes.pot: Rebuild.
430 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
432 * Makefile.am: Rebuild dependencies.
433 (HFILES): Add fr30-opc.h.
434 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
435 * Makefile.in: Rebuild.
437 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
438 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
440 * acconfig.h: Remove.
441 * configure: Rebuild with current autoconf/automake.
442 * aclocal.m4: Likewise.
443 * config.in: Likewise.
444 * Makefile.in: Likewise.
446 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
448 * m68k-opc.c: Correct move (not movew) to status word on 5200.
450 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
452 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
453 * i386-dis.c (x_mode): Define.
457 (dis386_twobyte): Remove.
458 (dis386_twobyte_att): New.
459 (dis386_twobyte_intel): New.
460 (print_insn_x86): Use new arrays.
462 (float_mem_intel): New.
463 (float_mem_att): New.
464 (dofloat): Use new float_mem arrays.
465 (print_insn_i386_att): New.
466 (print_insn_i386_intel): New.
467 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
468 (putop): Handle intel syntax.
469 (OP_indirE): Handle intel syntax.
470 (OP_E): Handle intel syntax.
471 (OP_I): Handle intel syntax.
472 (OP_sI): Handle intel syntax.
473 (OP_OFF): Handle intel syntax.
477 1999-01-27 Doug Evans <devans@casey.cygnus.com>
479 * fr30-opc.h,fr30-opc.c: Rebuild.
480 * i960c-opc.h,i960c-opc.c: Rebuild.
481 * m32r-opc.c: Rebuild.
483 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
485 * hppa-dis.c: revert HP merge changes until HP gives us
488 1999-01-19 Nick Clifton <nickc@cygnus.com>
490 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
491 offsets as well as symbloic address.
493 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
495 * hppa-dis.c: fix comments and some indentation.
497 1999-01-12 Doug Evans <devans@casey.cygnus.com>
499 * fr30-opc.c,i960c-opc.c: Regenerate.
501 1999-01-11 Doug Evans <devans@casey.cygnus.com>
503 * fr30-opc.c: Regenerate.
505 1999-01-06 Doug Evans <devans@casey.cygnus.com>
507 * m32r-dis.c: Regenerate.
509 1999-01-05 Doug Evans <devans@casey.cygnus.com>
511 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
512 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
513 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
515 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
517 * configure.in: Require autoconf 2.12.1 or higher.
519 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
521 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
523 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
525 * fr30-opc.c: Regenerated.
527 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
529 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
531 1998-12-15 Dave Brolley <brolley@cygnus.com>
533 * fr30-opc.c,fr30-opc.h: Regenerated.
535 1998-12-14 Dave Brolley <brolley@cygnus.com>
537 * fr30-opc.c,fr30-opc.h: Regenerated.
539 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
541 * fr30-opc.c,fr30-opc.h: Regenerated.
543 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
545 * m32r-opc.c: Regenerate.
547 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
549 * dis-buf.c (generic_strcat_address): reformat to GNU coding
550 conventions. change sprintf call to an sprintf_vma call.
552 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
554 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
556 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
558 The following changes were made by
559 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
560 David Taylor <taylor@texas.cygnus.com>, and
561 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
562 merge in changes by HP; HP did not create ChangeLog entries.
564 * dis-buf.c (generic_strcat_address): new function.
566 * hppa-dis.c: Changes to improve hppa disassembly.
567 Changed formatting in : reg_names, fp_reg_names,control_reg,
568 New variables : sign_extension_names, deposit_names, conversion_names
569 float_test_names, compare_cond_names_double, add_cond_names_double,
570 logical_cond_names_double, unit_cond_names_double,
571 branch_push_pop_names, saturation_names, shift_names, mix_names,
572 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
573 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
574 (fput_const): renamed as fput_hex_const
576 - use the macros fputs_filtered and
577 fput_decimal_const whenever possible; calls to sign_extend require
578 2 params -- add a missing second param of 0.
579 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
580 architecture version number of current machine. HP folks are
581 trying to handle situation where the target program was compiled
582 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
584 - added new cases : 'g', 'B', 'm'
585 - added cases specifically for PA 2.0
586 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
587 - calls to fput_const become calls to fput_hex_const
589 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
591 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
592 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
593 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
594 * Makefile.in: Rebuilt.
595 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
597 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
598 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
600 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
602 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
604 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
606 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
608 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
609 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
611 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
613 * fr30-opc.c: Regenerate.
615 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
617 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
619 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
621 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
623 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
625 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
627 1998-11-30 Doug Evans <devans@casey.cygnus.com>
629 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
630 CGEN_INSN_BASE_VALUE.
631 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
632 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
634 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
636 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
638 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
640 * fr30-asm.c,fr30-dis.c: Regenerated.
642 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
644 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
646 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
648 * fr30-opc.c: Regenerated.
650 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
652 * fr30-opc.c: Regenerated.
653 * fr30-opc.h: Regenerated.
654 * fr30-dis.c: Regenerated.
655 * fr30-asm.c: Regenerated.
657 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
659 * mips-opc.c (sync.p,sync.l): Swap insn values.
661 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
663 * fr30-opc.c: Regenerate.
665 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
667 * fr30-opc.c: Regenerated.
668 * fr30-opc.h: Regenerated.
670 1998-11-18 Doug Evans <devans@casey.cygnus.com>
672 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
673 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
675 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
677 * fr30-opc.c: Regenerated.
679 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
681 * fr30-opc.c: Regenerated.
682 * fr30-opc.h: Regenerated.
683 * fr30-dis.c: Regenerated.
684 * fr30-asm.c: Regenerated.
686 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
688 * po/opcodes.pot: Regenerated.
689 * fr30-opc.c: Regenerated.
690 * fr30-opc.h: Regenerated.
691 * fr30-dis.c: Regenerated.
692 * fr30-asm.c: Regenerated.
694 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
696 * disassemble.c (disassembler): Add support for FR30 target.
698 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
700 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
701 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
703 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
705 * po/opcodes.pot: Regenerate.
706 * po/POTFILES.in: Regenerate.
707 * fr30-opc.c: Regenerate.
708 * fr30-opc.h: Regenerate.
710 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
712 * m32r-asm.c: Regenerate.
714 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
716 * configure.in: Added case for bfd_fr30_arch.
717 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
718 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
719 (CLEANFILES): Added stamp-fr30.
721 * fr30-asm.c: New file.
722 * fr30-dis.c: New file.
723 * fr30-opc.c: New file.
724 * fr30-opc.h: New file.
725 * po/POTFILES.in: Regenerated
726 * po/opcodes.pot: Regenerated
728 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
730 * configure.in: detect cygwin* instead of cygwin32*
731 * configure: regenerate
733 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
735 * mips-opc.c (IS_M): Added.
737 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
739 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
741 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
743 * m32r-opc.h,m32r-opc.c: Regenerate.
745 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
747 * i386-dis.c (OP_3DNowSuffix): New static function.
750 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
751 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
752 (insn_codep): New static variable.
753 (print_insn_x86): Init insn_codep after prefixes.
754 (grps): Add GRP14 entries for prefetch, prefetchw.
757 From Jeff B Epler <jepler@usgs.gov>
758 * i386-dis.c (Suffix3DNow): New table.
760 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
762 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
764 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
766 * d10v-dis.c (print_operand): If num is nonzero, then
767 add OPERAND_ACC1, not OPERAND_ACC0.
769 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
771 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
774 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
776 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
779 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
781 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
783 1998-09-09 Michael Meissner <meissner@cygnus.com>
785 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
788 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
790 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
792 (print_insn_little_arm): Detect Thumb symbols in elf object
795 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
797 * alpha-dis.c (print_insn_alpha): Use the machine type to
798 decide which PALcode set to include.
800 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
802 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
804 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
806 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
807 MSUB and MSUBS instructions.
809 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
811 * ppc-opc.c (powerpc_operands): Omit parens around additions in
814 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
816 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
817 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
818 +, -, and d for ColdFire.
820 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
821 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
822 (extract_mbe): Likewise.
824 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
826 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
828 * m10300-opc.c: First cut at UDF instructions.
830 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
832 * m32r-opc.c: Regenerate (remove semantic descriptions).
834 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
836 * arm-dis.c (print_insn_big_arm): Fix indentation.
837 (print_insn_little_arm): Likewise.
839 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
841 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
843 (print_insn_little_arm): Likewise.
845 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
847 Move all global state data into opcode table struct, and treat
848 opcode table as something that is "opened/closed".
849 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
850 (cgen_asm_init): Delete.
851 (cgen_set_parse_operand_fn): New function.
852 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
853 (cgen_dis_init): Delete.
854 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
855 (cgen_current_{opcode_table_mach,endian}): Delete.
856 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
858 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
860 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
863 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
865 * m10300-opc.c: Add entries for "no_match_operands" field in
868 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
870 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
872 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
874 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
876 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
878 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
880 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
882 (OP_J): Remove unnecessary subtraction when 16-bit displacement
883 will be masked later.
885 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
887 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
889 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
891 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
893 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
895 * m10300-dis.c: Only recognize instructions from the currently
897 * m10300-opc.c: Add field indicating the particular variant of
898 the mn10300 each instruction is available on.
900 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
902 * configure.in: For bfd_vax_arch, build vax-dis.lo.
903 * Makefile.am: Rebuild dependencies.
904 (CFILES): Add vax-dis.c.
905 (ALL_MACHINES): Add vax-dis.lo.
906 * aclocal.m4: Rebuild with current libtool.
907 * configure, Makefile.in: Rebuild.
909 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
911 * vax-dis.c: New file, from work by Pauline Middelink
912 <middelin@polyware.iaf.nl>.
913 * disassemble.c (ARCH_vax): Define if ARCH_all.
914 (disassembler): Add case for ARCH_vax.
915 * makefile.vms: Support compilation on vms/vax.
917 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
919 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
920 related to sign extension and the size of ints.
922 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
924 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
925 instructions. Support (sp) addressing mode by expanding it into
928 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
930 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
932 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
934 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
936 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
938 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
941 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
943 * mips-dis.c (print_insn_little_mips): Previously, instruction
944 printing references the symbol table to determine whether the
945 instruction resides in a block regular instructions or mips16
946 instructions. However, when the disassembler gets used in other
947 environments where the symbol table is not present, we no longer
948 rely in the symbol table, rather, use the low bit of the
949 instructions address to guess. There should be no change for usage
950 of the disassembler in host based programs, gdb, objdump.
951 (print_insn_big_mips): ditto.
952 (print_insn_mips): ditto
954 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
956 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
958 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
960 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
962 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
964 * i386-dis.c (index16): Add '%' to register names. Use ','
967 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
969 * i386-dis.c: Don't print opcode suffix when we can figure out the
970 size (and gas can!) by register operands, or from the default
972 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
974 (dis386, dis386_twobyte, grps): Use new suffix macros.
975 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
976 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
977 order of cmps operands to agree with Intel docs. Correct operand
978 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
979 agree with Intel docs.
980 (print_insn_x86): Print orphan fwait before other prefixes.
981 Return correct byte count for orphan fwait with prefixes. Don't
982 print `bound' operands in reverse order.
983 (ckprefix): Stop accumulating prefixes if we get fwait.
984 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
986 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
988 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
989 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
991 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
993 Fix problems when bfd_vma is wider than long.
994 * i386-dis.c: Make op_address and start_pc unsigned.
995 (set_op): Make parameter unsigned.
996 (print_insn_x86): Cast to bfd_vma when passing a value to
998 * ns32k-dis.c (CORE_ADDR): Don't define.
999 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1000 bfd_scan_vma to read back address.
1001 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1003 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1004 (NEXTULONG): New definition.
1005 (print_insn_m68k): Avoid overflow when computing third argument of
1007 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1008 Use disp instead of val to store offset values.
1009 (print_indexed): Use base_disp instead of word to store base
1010 displacement, to avoid overflow.
1011 * m10300-dis.c (disassemble): Cast value to long when computing
1012 pc-relative address, to get correct sign extension.
1014 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1016 * m32r-opc.c: Regenerate.
1018 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1020 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1021 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1023 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1025 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1027 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1029 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1031 (OP_DSreg): Rename from OP_DSSI.
1032 (OP_ESreg): Rename from OP_ESDI.
1033 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1035 (append_seg): Rename from append_prefix.
1036 (ptr_reg): New function.
1037 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1039 (PREFIX_ADDR): Rename from PREFIX_ADR.
1040 (float_reg): Add non-broken opcodes for people who don't want
1043 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1045 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1048 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1050 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1052 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1054 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1055 0; produce error message for shifts of size 32 (or 64 for 64-bit
1056 shifts), because the hardware doesn't support them.
1058 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1060 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1061 LONG_2, LONG_2b formats to use this new operand.
1063 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1065 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1067 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1069 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1070 endian data support.
1072 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1074 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1075 and SHORT_B3b formats to use Rb instead of Ra.
1077 Add FLAG_MUL16 to MUL2XH opcode.
1079 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1080 to existing 1.1.1 parallelisation prohibition procedure.
1082 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1084 * m32r-asm.c,m32r-dis.c: Regenerate.
1086 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1088 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1089 with a shift count of 0.
1091 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1093 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1094 (cgen_hw_lookup_by_num): New function.
1096 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1098 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1100 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1102 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1103 as big-endian on SPARClite.
1105 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1107 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1109 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1111 * po/Make-in (install-info): New target.
1113 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1115 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1116 * configure: Rebuild.
1118 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1120 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1121 variety of ISA2 instructions to set bottom ten bits of trap code.
1123 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1125 * Makefile.am (config.status): Add explicit target so that
1126 config.status depends upon bfd/configure.in.
1127 * Makefile.in: Rebuild.
1129 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1131 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1132 instructions to set bottom ten bits of break code.
1133 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1134 for above optional argument.
1136 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1138 * makefile.vms: Run dec c with /nodebug.
1140 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1142 * Makefile.in: Rebuilt.
1143 * Makefile.am: Regenerated dependencies with mkdep.
1145 * opintl.h (_): Define as dgettext.
1147 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1149 * cgen-asm.c: Internationalised.
1150 * m32r-asm.c: Internationalised.
1151 * m32r-dis.c: Internationalised.
1152 * m32r-opc.c: Internationalised.
1154 * aclocal.m4: Regenerated.
1155 * configure: Regenerated.
1156 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1157 * Makefile.in: Rebuild.
1158 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1159 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1161 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1163 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1165 * aclocal.m4, configure: Rebuild with current tools.
1167 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1169 * opintl.h: New file - contains internationalisation macros used
1170 by source files in this directory.
1171 * po/: New subdirectory - contains internationalisation files.
1172 * po/Make-in: New file - Makefile constructor.
1173 * po/POTFILES.in: New file - list of files in opcodes directory
1174 that should be scan for internationalisation macros.
1175 * po/opcodes.pot: New file - list of internationisation strings
1176 found in files mentioned in po/POTFILES.in.
1177 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1178 entry. Add intl directory to include paths.
1179 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1180 HAVE_STRCPY, HAVE_LC_MESSAGES
1181 * configure.in: Add rule to build Makefile in po subdirectory.
1182 * Makefile.in: Rebuilt.
1183 * aclocal.m4: Rebuilt.
1184 * config.in: Rebuilt.
1185 * configure: Rebuilt.
1186 * alpha-opc.c: Internationalised.
1187 * arc-dis.c: Internationalised.
1188 * arc-opc.c: Internationalised.
1189 * arm-dis.c: Internationalised.
1190 * cgen-asm.c: Internationalised.
1191 * d30v-dis.c: Internationalised.
1192 * dis-buf.c: Internationalised.
1193 * h8300-dis.c: Internationalised.
1194 * h8500-dis.c: Internationalised.
1195 * i386-dis.c: Internationalised.
1196 * m10200-dis.c: Internationalised.
1197 * m10300-dis.c: Internationalised.
1198 * m68k-dis.c: Internationalised.
1199 * m88k-dis.c: Internationalised.
1200 * mips-dis.c: Internationalised.
1201 * ns32k-dis.c: Internationalised.
1202 * opintl.h: Internationalised.
1203 * ppc-opc.c: Internationalised.
1204 * sparc-dis.c: Internationalised.
1205 * v850-dis.c: Internationalised.
1206 * v850-opc.c: Internationalised.
1208 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1210 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1211 (asm_hash_table_entries): New variable.
1212 (cgen_asm_init): Free asm_hash_table_entries.
1213 (hash_insn_array,hash_insn_list): New functions.
1214 (build_asm_hash_table): Use them. Hash macro insns as well.
1215 (cgen_asm_lookup_insn): Update.
1216 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1217 (dis_hash_table_entries): New variable.
1218 (cgen_dis_init): Free dis_hash_table_entries.
1219 (hash_insn_array,hash_insn_list): New functions.
1220 (build_dis_hash_table): Use them. Hash macro insns as well.
1221 (cgen_dis_lookup_insn): Update.
1222 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1223 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1224 (cgen_macro_insn_count): New function.
1225 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1227 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1229 * i386-dis.c (OP_DSSI): Print segment override.
1231 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1233 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1236 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1238 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1239 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1240 * configure.in: Define and substitute WIN32LDFLAGS and
1242 * aclocal.m4: Rebuild with new libtool.
1243 * configure, Makefile.in: Rebuild.
1245 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1247 * m32r-opc.c: Regenerate.
1249 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1251 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1252 before trying to copy it.
1253 * Makefile.in: Rebuild.
1255 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1257 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1259 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1261 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1262 from an arbitrary valid buffer instead of fetching them on demand
1264 (invalid_float): use bit_extract_simple() instead of bit_extract().
1266 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1268 From H.J. Lu <hjl@gnu.org>:
1269 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1272 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1274 * Branched binutils 2.9.
1276 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1278 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1279 disassembling last 4 bytes of a section.
1281 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1283 Fix some gcc -Wall warnings:
1284 * arc-dis.c (print_insn): Add casts to avoid warnings.
1285 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1286 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1287 * m10200-dis.c (disassemble): Likewise.
1288 * m10300-dis.c (disassemble): Likewise.
1289 * ns32k-dis.c (print_insn_ns32k): Likewise.
1290 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1291 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1292 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1293 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1294 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1295 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1296 * tic80-dis.c (print_one_instruction): Likewise.
1297 * w65-dis.c (print_operand): Likewise.
1298 * z8k-dis.c (fetch_data): Likewise.
1299 * a29k-dis.c: Add return type for find_byte_func_type.
1300 * arc-opc.c: Include <stdio.h>. Remove declarations of
1301 insert_multshift and extract_multshift.
1302 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1304 (extract_value): Fully parenthesize expression.
1305 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1306 * h8500-opc.h (h8500_table): Fully bracket initializer.
1307 * w65-opc.h (optable): Likewise.
1308 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1309 * i386-dis.c (OP_E): Initialize local variables.
1310 * m10200-dis.c (print_insn_mn10200): Likewise.
1311 * mips-dis.c (print_insn_mips16): Likewise.
1312 * sh-dis.c (print_insn_shx): Likewise.
1313 * v850-dis.c (print_insn_v850): Likewise.
1314 * ns32k-dis.c (print_insn_arg): Declare.
1315 (get_displacement, invalid_float): Declare.
1316 (list_search, sign_extend, flip_bytes): Declare return type.
1317 (get_displacement): Likewise.
1318 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1320 (print_insn_ns32k): Make i unsigned.
1321 (invalid_float): Make static. Declare type of val.
1322 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1323 on each for iteration.
1324 * tic30-dis.c (get_indirect_operand): Likewise.
1325 * z8k-dis.c (print_insn_z8001): Declare return type.
1326 (print_insn_z8002): Likewise.
1327 (unparse_instr): Fix sprintf format strings.
1329 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1331 * mips-opc.c: Add "sync.l" and "sync.p".
1333 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1335 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1336 default m68k variant to recognize.
1338 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1339 (ctrl, cobr, mem, ea): Likewise.
1340 (print_addr): Likewise. Remove cast.
1341 (ea): Cast argument of print_addr to bfd_vma.
1343 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1345 (cgen_parse_unsigned_integer): Likewise.
1346 (cgen_parse_address): Likewise.
1348 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1350 * i960-dis.c (ctrl): Add full braces to structure initialization.
1351 (cobr, mem, reg): Likewise.
1352 (ea): Correct parenthesization in expression.
1354 * cgen-asm.c: Include <ctype.h>.
1355 (build_asm_hash_table): Remove unused local variable i.
1356 (cgen_parse_keyword): Add casts to avoid warnings.
1358 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1359 symbol. Fix indentation.
1360 (print_insn_little_arm): Likewise.
1362 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1364 * configure.in: Use AM_DISABLE_SHARED.
1365 * aclocal.m4, configure: Rebuild with libtool 1.2.
1367 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1369 These patches are courtesy of Jonathan Walton and Tony Thompson
1370 (athompso@cambridge.arm.com).
1372 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1375 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1376 both the offset and the label closest to the destination.
1378 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1380 * m32r-opc.h: Regenerate.
1382 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1384 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1386 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1388 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1389 assume that info->symbols is non-empty.
1391 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1393 * alpha-opc.c (cvtqs) There is no such thing.
1394 (cvttq): Missing most of the /*d variants.
1396 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1398 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1399 delayed branches or jumps.
1401 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1403 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1405 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1406 * tic30-dis.c (print_branch): Likewise.
1408 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1410 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1411 saved_symbol code as it is no longer needed.
1413 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1415 * cgen-asm.c: Include symcat.h.
1416 * cgen-dis.c,cgen-opc.c: Ditto.
1417 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1419 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1421 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1423 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1425 * m32r-opc.[ch]: Regenerate.
1427 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1429 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1430 arguments. Don't perform validation here.
1431 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1433 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1435 * m32r-opc.c: Regenerate.
1437 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1439 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1440 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1442 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1444 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1446 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1448 * configure.in: Get the version number from BFD.
1449 * configure: Rebuild.
1451 From H.J. Lu <hjl@gnu.org>:
1452 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1453 * Makefile.in: Rebuild.
1455 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1457 * m32r-opc.c: Regenerate.
1458 * m32r-opc.h: Regenerate.
1460 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1462 * m32r-opc.c: Regenerate.
1464 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1466 Fix rac to accept only a0:
1467 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1468 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1469 Introduce OPERAND_GPR.
1470 * d10v-dis.c (print_operand): Likewise.
1472 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1474 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1475 (cgen_hw_lookup): Make result const.
1476 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1478 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1480 * configure, aclocal.m4: Rebuild with new libtool.
1482 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1484 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1485 instructions use a PC relative branch, not absolute.
1487 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1489 * configure.in: Set libtool_enable_shared rather than
1490 libtool_shared. Remove diversion hack.
1491 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1493 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1495 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1496 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1498 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1500 * tic30-dis.c: New file.
1501 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1502 * configure.in: Handle bfd_tic30_arch.
1503 * Makefile.am: Rebuild dependencies.
1504 (CFILES): Add tic30-dis.c
1505 (ALL_MACHINES): Add tic30-dis.lo.
1506 * configure, Makefile.in: Rebuild.
1508 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1510 * m32r-opc.h (HAVE_CPU_M32R): Define.
1512 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1514 * v850-opc.c (insertion routines): If both alignment and size is
1515 wrong then report this.
1517 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1519 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1520 Only recognize instructions for the current target_processor.
1522 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1524 * d10v-dis.c (PC_MASK): Correct value.
1525 (print_operand): If there's a reloc, don't calculate the
1526 address because they could be in different sections.
1528 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1530 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1531 instruction after the 4650's "mul" instruction; nobody's using the
1532 4010 these days. If object files someday indicate which processor
1533 variant they're intended for, we can do a better job at this.
1535 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1537 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1538 table provided entry size. Use CGEN_INSN_MNEMONIC.
1539 (cgen_parse_keyword): Rewrite.
1540 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1541 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1542 * cgen-opc.c: Clean up pass over `struct foo' usage.
1543 (cgen_keyword_lookup_value): Handle "" entry.
1544 (cgen_keyword_add): Likewise.
1546 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1548 * mips-opc.c: Add FP_D to s.d instruction flags.
1550 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1552 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1554 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1556 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1557 PC relative offset forms before the 15 bit forms. An assembler command
1558 line option now chooses the default.
1560 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1562 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1563 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1565 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1567 * configure: Only build libopcodes shared if --enable-shared's value
1568 was `yes', or was set to `*opcodes*'.
1569 * aclocal.m4: Likewise.
1570 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1571 original source of this bit of code. It's not clear what the best fix
1574 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1576 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1577 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1578 offset forms before the 15 bit forms, to default to the long forms.
1580 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1582 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1584 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1586 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1587 symbol if none is present.
1588 (print_insn_big_arm): Prevent examination of stored symbol if
1591 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1593 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1595 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1597 * disassemble.c: Remove disasm_symaddr() function.
1599 * arm-dis.c: Use info->symbol instead of info->flags to determine
1600 if disassmbly should be in Thumb or Arm mode.
1602 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1604 * arm-dis.c: Add support for disassembling Thumb opcodes.
1605 (print_insn_thumb): New function.
1607 * disassemble.c (disasm_symaddr): New function.
1609 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1610 (thumb_opcodes): Table of Thumb opcodes.
1612 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1614 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1616 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1617 and 'v' as operand types.
1619 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1621 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1622 <olivier.carmona@di.epfl.ch>.
1623 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1624 which has a two word opcode with a one word argument.
1626 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1628 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1629 unsigned, not signed.
1630 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1632 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1634 * d10v-dis.c (print_operand):
1635 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1637 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1639 * d10v-opc.c (OPERAND_FLAG): Split into:
1640 (OPERAND_FFLAG, OPERAND_CFLAG) .
1644 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1646 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1647 field for all INSN_MACRO's.
1648 * mips16-opc.c: same
1650 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1652 * mips-opc.c (sync,cache): These are 3900 insns.
1654 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1656 sh-opc.h (sh_table): Remove ftst/nan.
1658 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1660 * mips-opc.c (ffc, ffs): Fix mask.
1662 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1664 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1667 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1669 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1670 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1672 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1674 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1675 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1677 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1679 * v850-dis.c (disassemble): Replace // with /* ... */
1681 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1683 * sparc-opc.c: Add wr & rd for v9a asr's.
1684 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1685 (v9a_asr_reg_names): New variable.
1686 Patch from David Miller <davem@vger.rutgers.edu>.
1688 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1690 * sparc-opc.c (v9notv9a): New insn type.
1691 (IMPDEP): Move to the end to not conflict with edge8 et al.
1692 Patch from David Miller <davem@vger.rutgers.edu>.
1694 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1696 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1698 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1700 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1702 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1704 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1705 of disassemble_info structure to determine if an overlay address
1706 has a matching symbol in low memory.
1708 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1709 new symbol_at_address_func field in disassemble_info structure.
1711 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1713 * v850-opc.c (extract_d22): Use signed arithmatic.
1715 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1717 * mips-opc.c: Three op mult is not an ISA insn.
1719 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1721 * mips-opc.c: Fix formatting.
1723 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1725 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1726 than assuming that char is signed. Explicitly sign extend 16 bit
1727 values, rather than assuming that short is 16 bits.
1728 (OP_sI, OP_J, OP_DIR): Likewise.
1730 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1732 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1735 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1737 * v850-opc.c: Fix typo in comment.
1739 * v850-dis.c (disassemble): Add test of processor type when
1740 determining opcodes.
1742 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1744 * configure.in: Use a diversion to set enable_shared before the
1745 arguments are parsed.
1746 * configure: Rebuild.
1748 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1750 * m68k-opc.c (TBL1): Use ! rather than `.
1751 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1753 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1755 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1757 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1759 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1762 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1763 * aclocal.m4: Rebuild with new libtool.
1764 * configure: Rebuild.
1766 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1768 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1770 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1772 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1774 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1776 * v850-opc.c (v850_opcodes): Further rearrangements.
1778 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1780 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1782 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1784 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1787 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1789 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1791 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1793 * v850-opc.c: Initialise processors field of v850_opcode structure.
1795 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1797 Merge changes from Martin Hunt:
1799 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1801 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1802 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1803 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1805 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1807 * d30v-dis.c (print_insn): First operand of d*i (delayed
1808 branch) instructions is relative.
1810 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1811 (d30v_operand_table): Add IMM6S3 type.
1812 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1814 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1815 and cmp instructions.
1817 * d30v-opc.c: Correct entries for repeat*, and sat*.
1818 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1819 types. Correct several formats.
1821 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1823 * d30v-opc.c (pre_defined_registers): Change control registers.
1825 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1826 SHORT_C2. Manual was incorrect.
1828 * d30v-dis.c (lookup_opcode): Return value now indicates
1829 if an opcode has a short and a long form. Used for deciding
1830 to append a ".s" or ".l".
1831 (print_insn): Append a ".s" to an instruction if it is
1832 the short form and ".l" if it is a long form. Do not append
1833 anything if the instruction has only one possible size.
1835 * d30v-opc.c: Change mulx2h to require an even register.
1836 New form: SHORT_A2; a SHORT_A form that needs an even
1837 register as the first operand.
1839 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1840 instruction was not being disassembled if there were an odd
1841 number of instructions.
1843 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1845 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1847 * v850-dis.c (disassemble): Improved display of register lists.
1849 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1851 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1852 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1853 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1854 fandnot1s, fandnot2s.
1856 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1858 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1860 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1862 * cgen-asm.c (cgen_parse_address): New argument resultp.
1863 All callers updated.
1864 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1866 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1868 * mn10200-dis.c (disassemble): PC relative instructions are
1869 relative to the next instruction, not the current instruction.
1871 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1873 * v850-dis.c (disassemble): Only signed extend values that are not
1874 returned by extract functions.
1875 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1877 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1879 * v850-opc.c: Update comments. Remove use of
1880 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1882 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1884 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1886 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1888 * configure: Rebuilt with latest devo autoconf for NT support.
1890 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1892 * v850-dis.c (disassemble): Use curly brace syntax for register
1895 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1896 where r0 is being used as a destination register.
1898 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1900 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1902 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1904 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1906 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1908 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1909 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1912 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1914 * configure (cgen_files): Add support for v850e target.
1915 * configure.in (cgen_files): Add support for v850e target.
1917 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1919 * configure (cgen_files): Add support for v850ea target.
1920 * configure.in (cgen_files): Add support for v850ea target.
1922 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1924 * configure.in (bfd_arc_arch): Add.
1925 * configure: Rebuild.
1926 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1927 * Makefile.in: Rebuild.
1928 * arc-dis.c, arc-opc.c: New files.
1929 * disassemble.c (ARCH_all): Define ARCH_arc.
1930 (disassembler): Add ARC support.
1932 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1934 * v850-dis.c (disassemble): Add support for v850EA instructions.
1936 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1937 (v850_opcodes): Add v850EA instructions.
1939 * v850-dis.c (disassemble): Add support for v850E instructions.
1941 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1942 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1943 insert_spe, extract_spe): New Functions.
1944 (v850_opcodes): Add v850E instructions.
1946 * v850-opc.c: Reorganised and re-layed out to improve readability
1949 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1951 * configure: Rebuild with autoconf 2.12.1.
1953 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * aclocal.m4, configure: Rebuild with new automake patches.
1957 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1960 * acinclude.m4: Just include acinclude.m4 from BFD.
1961 * aclocal.m4, configure: Rebuild.
1963 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1965 * Makefile.am: New file, based on old Makefile.in.
1966 * acconfig.h: New file.
1967 * acinclude.m4: New file.
1968 * stamp-h.in: New file.
1969 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1970 Removed shared library handling; now handled by libtool. Replace
1971 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1972 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1973 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1974 handling in AC_OUTPUT.
1975 * dep-in.sed: Change .o to .lo.
1976 * Makefile.in: Now built with automake.
1977 * aclocal.m4: Now built with aclocal.
1978 * config.in, configure: Rebuild.
1980 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1982 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1984 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1986 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1988 * sparc-dis.c (sorted_opcodes): New static local.
1989 (struct opcode_hash): `opcode' is pointer to const element.
1990 (build_hash): First arg is now table of sorted pointers.
1991 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1992 (compare_opcodes): Update.
1994 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1996 * cgen-opc.c: #include <ctype.h>.
1997 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1998 Handle case insensitive hashing.
1999 (hash_keyword_value): Change type of `value' to unsigned int.
2001 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2003 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2004 precision FP, mark it as such. Likewise for double precision
2005 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2008 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2010 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2012 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2013 nesting depth when all the macros are expanded.
2015 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2017 * sparc-opc.c: The fcmp v9a instructions take an integer register
2018 as a destination, not a floating point register. From Christian
2019 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2021 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2023 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2024 syntax. From Roman Hodek
2025 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2027 * i386-dis.c (twobyte_has_modrm): Fix pand.
2029 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2031 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2033 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2035 * arm-dis.c: Add prototypes for arm_decode_shift and
2038 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2040 * mips-opc.c: Add r3900 insns.
2042 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2045 print delay slot instructions on the same line. When using a PC
2046 relative load, add a comment with the value being loaded if it can
2049 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2051 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2052 to pushS/popS for segment regs and byte constant so that
2053 pushw/popw printed when in 16 bit data mode.
2055 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2056 print cbtw, cwtd in 16 bit data mode.
2057 * i386-dis.c (putop): extra case W to support above.
2059 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2060 address size prefix in 16 bit address mode.
2062 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2064 * sh-dis.c: Reindent. Rename local variable fprintf to
2067 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2069 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2071 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2073 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2075 * mips16-opc.c (mip16_opcodes): same.
2077 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2079 * m68k-opc.c (moveb): Change $d to %d.
2081 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2083 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2084 (twobyte_has_modrm): Likewise.
2086 (OP_MMX, OP_EM, OP_MS): New static functions.
2088 * i386-dis.c: Revert patch of April 4. The output now matches
2091 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2093 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2096 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2098 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2100 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2102 * Makefile.in (install): Depend upon installdirs.
2103 (installdirs): New target.
2105 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2107 From Thomas Graichen <graichen@rzpd.de>:
2108 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2109 * configure: Rebuild.
2111 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2113 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2114 Delete string{,s}.h support.
2116 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2118 * cgen-asm.c (cgen_parse_operand_fn): New global.
2119 (cgen_parse_{{,un}signed_integer,address}): Update call to
2120 cgen_parse_operand_fn.
2121 (cgen_init_parse_operand): New function.
2122 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2123 from cgen_asm_init_parse.
2124 (m32r_cgen_assemble_insn): New operand `errmsg'.
2125 Delete call to as_bad, return error message to caller.
2126 (m32r_cgen_asm_hash_keywords): #if 0 out.
2128 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2130 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2132 [case 'J']: Fix typo in register name.
2134 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2136 * configure.in: Substitute SHLIB_LIBS.
2137 * configure: Rebuild.
2138 * Makefile.in (SHLIB_LIBS): New variable.
2139 ($(SHLIB)): Use $(SHLIB_LIBS).
2141 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2143 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2145 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2147 * disassemble.c (disassembler): Handle m32r.
2149 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2151 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2152 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2153 * Makefile.in (CFILES): Add them.
2154 (ALL_MACHINES): Add them.
2155 (dependencies): Regenerate.
2156 * configure.in (cgen_files): New variable.
2157 (bfd_m32r_arch): Add entry.
2158 * configure: Regenerate.
2160 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2162 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2163 * configure: Rebuild.
2165 * Makefile.in: Rebuild dependencies.
2167 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2169 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2172 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2174 * Branched binutils 2.8.
2176 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2178 * m10200-dis.c: Rename from mn10200-dis.c.
2179 * m10200-opc.c: Rename from mn10200-opc.c.
2180 * m10300-dis.c: Rename from mn10300-dis.c
2181 * m10300-opc.c: Rename from mn10300-opc.c.
2182 * Makefile.in: Update accordingly.
2184 * mips16-opc.c: Add mul and dmul macros.
2186 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2188 * makefile.vms: Update CFLAGS, add clean target.
2190 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2192 * mips-opc.c: Add "wait". From Ralf Baechle
2193 <ralf@gnu.ai.mit.edu>.
2195 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2196 * configure, config.in: Rebuild.
2197 * sysdep.h: Include <stdlib.h> if it exists.
2198 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2200 * Makefile.in: Rebuild dependencies.
2202 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2204 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2205 Andrew Bray <andy@madhouse.demon.co.uk>.
2207 * mips-opc.c: Add cast when setting mips_opcodes.
2209 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2211 * v850-dis.c (disassemble): Fix sign extension problem.
2212 * v850-opc.c (extract_d*): Fix sign extension problems to make
2213 disassembly calculate branch offsets correctly.
2215 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2217 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2219 * mips-opc.c: Add dctr and dctw.
2221 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2223 * d30v-dis.c (print_insn): Change the way signed constants
2226 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2228 * Makefile.in (BFD_H): New variable.
2229 (HFILES): New variable.
2230 (CFILES): Add all C files.
2231 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2232 Delete old dependencies, and build new ones.
2233 * dep-in.sed: New file.
2235 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2237 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2239 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2241 * mn10200-opc.c: Change "trap" to "syscall".
2242 * mn10300-opc.c: Add new "syscall" instruction.
2244 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2246 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2247 mulul insns on the coldfire.
2249 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2251 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2252 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2253 (print_insn_little_arm): Likewise.
2255 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2257 Based on patches from H.J. Lu <hjl@lucon.org>:
2258 * i386-dis.c (fetch_data): Add prototype.
2259 * m68k-dis.c (fetch_data): Add prototype.
2260 (dummy_print_address): Add prototype. Make static.
2261 * ppc-opc.c (valid_bo): Add prototype.
2262 * sparc-dis.c (build_hash_table): Add prototype.
2263 (is_delayed_branch, compute_arch_mask): Add prototypes.
2264 (print_insn_sparc): Make several local variables const.
2265 (compare_opcodes): Change arguments to const PTR. Add prototype.
2266 * sparc-opc.c (arg): Change name field to be const.
2267 (lookup_name, lookup_value): Add prototypes. Change table and
2268 name parameters to be const.
2269 (sparc_encode_asi): Change name parameter to be const.
2270 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2271 (sparc_encode_sparclet_cpreg): Likewise.
2272 (sparc_decode_asi): Change return type to be const.
2273 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2274 (sparc_decode_sparclet_cpreg): Likewise.
2276 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2278 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2279 Solaris doesn't like the combined options, and the -f is
2281 (stamp-tshlink, install): Likewise.
2283 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2285 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2288 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2290 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2292 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2294 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2297 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2299 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2301 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2303 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2305 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2307 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2309 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2311 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2312 floatformat_to_double to make portable.
2313 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2316 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2318 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2319 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2321 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2323 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2324 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2326 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2328 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2329 (OFF_SL_BR_SCALED): ... to this, and added the flag
2330 TIC80_OPERAND_BASEREL to the flags word.
2331 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2334 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2336 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2337 Change mips_opcodes from const array to a pointer,
2338 and change bfd_mips_num_opcodes from const int to int,
2339 so that we can increase the size of the mips opcodes table
2342 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2344 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2345 store BITNUM values in the table in one's complement form
2346 to match behavior when assembler is given a raw numeric
2347 value for a BITNUM operand.
2348 * tic80-dis.c (print_operand_bitnum): Ditto.
2350 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2352 * d30v-opc.c: Removed references to FLAG_X.
2354 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2356 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2358 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2360 * Makefile.in: Added d30v object files.
2361 * configure: (bfd_d30v_arch) Rebuilt.
2362 * configure.in: (bfd_d30v_arch) Added new case.
2363 * d30v-dis.c: New file.
2364 * d30v-opc.c: New file.
2365 * disassemble.c (disassembler) Add entry for d30v.
2367 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2369 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2370 representations for the floating point BITNUM values.
2372 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2374 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2375 in the table in one's complement form, as they appear in the
2377 (tic80_symbol_to_value): Use macros to access predefined
2379 (tic80_value_to_symbol): Ditto.
2380 (tic80_next_predefined_symbol): New function.
2381 * tic80-dis.c (print_operand_bitnum): Remove code that did
2382 one's complement for BITNUM values.
2384 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2386 * makefile.vms: Remove 8 bit characters. Update to latest
2389 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2391 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2393 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2395 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2396 (IMM24_PCREL): Likewise.
2398 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2401 address for an extended PC relative instruction that is not a
2404 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2406 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2409 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2411 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2412 (tic80_opcodes): Sort entries so that long immediate forms
2413 come after short immediate forms, making it easier for
2414 assembler to select the right one for a given operand.
2416 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2418 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2420 (print_insn_mips16): Likewise.
2422 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2424 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2425 a symbol class that restricts translation to just that
2426 class (general register, condition code, etc).
2428 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2430 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2431 and REG_DEST_E for register operands that have to be
2432 an even numbered register. Add REG_FPA for operands that
2433 are one of the floating point accumulator registers.
2434 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2435 (tic80_opcodes): Change entries that need even numbered
2436 register operands to use the new operand table entries.
2437 Add "or" entries that are identical to "or.tt" entries.
2439 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2441 * mips16-opc.c: Add new cases of exit instruction for
2443 * mips-dis.c (print_mips16_insn_arg): Display floating point
2444 registers in operands of exit instruction. Print `$' before
2445 register names in operands of entry and exit instructions.
2447 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2449 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2450 pairs for all predefined symbols recognized by the assembler.
2451 Also used by the disassembling routines.
2452 (tic80_symbol_to_value): New function.
2453 (tic80_value_to_symbol): New function.
2454 * tic80-dis.c (print_operand_control_register,
2455 print_operand_condition_code, print_operand_bitnum):
2456 Remove private tables and use tic80_value_to_symbol function.
2458 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2460 * d10v-dis.c (print_operand): Change address printing
2461 to correctly handle PC wrapping. Fixes PR11490.
2463 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2465 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2468 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2470 * mips-dis.c (print_insn_mips16): Set insn_info information.
2471 (print_mips16_insn_arg): Likewise.
2473 * mips-dis.c (print_insn_mips16): Better handling of an extend
2474 opcode followed by an instruction which can not be extended.
2476 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2478 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2479 coldfire moveb instruction to not allow an address register as
2480 destination. Although the documentation does not indicate that
2481 this is invalid, experiments uncovered unexpected behavior.
2482 Added a comment explaining the situation. Thanks to Andreas
2483 Schwab for pointing this out to me.
2485 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2487 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2488 entries are presorted so that entries with the same mnemonic are
2489 adjacent to each other in the table. Sort the entries for each
2490 instruction so that this is true.
2492 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2494 * m68k-dis.c: Include <libiberty.h>.
2495 (print_insn_m68k): Sort the opcode table on the most significant
2496 nibble of the opcode.
2498 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2500 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2501 "vsub", "vst", "xnor", and "xor" instructions.
2502 (V_a1): Renamed from V_a, msb of accumulator reg number.
2503 (V_a0): Add macro, lsb of accumulator reg number.
2505 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2507 * tic80-dis.c (print_insn_tic80): Broke excessively long
2508 function up into several smaller ones and arranged for
2509 the instruction printing function to be callable recursively
2510 to print vector instructions that have both a load and a
2511 math instruction packed into a single opcode.
2512 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2513 to explain why it comes after the other vector opcodes.
2515 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2517 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2518 move insns to handle immediate operands.
2520 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2522 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2523 fix operand mask in the "moveml" entries for the coldfire.
2525 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2527 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2528 New macros for building vector instruction opcodes.
2529 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2530 FMT_LI, which were unused. The field is now a flags field.
2531 Remove some opcodes that are possible, but illegal, such
2532 as long immediate instructions with doubles for immediate
2533 values. Add "vadd" and "vld" instructions.
2535 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2537 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2538 the order more logical. Move the shift alias instructions ("rotl",
2539 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2540 interspersed with the regular sr.x and sl.x instructions. Add
2541 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2542 "sub", "subu", "swcr", and "trap".
2544 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2546 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2547 (OFF_SL_PC): Renamed from OFF_SL.
2548 (OFF_SS_BR): New operand type for base relative operand.
2549 (OFF_SL_BR): New operand type for base relative operand.
2550 (REG_BASE): New operand type for base register operand.
2551 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2552 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2553 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2555 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2556 10 char field, padded with spaces on rhs, rather than a string
2557 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2558 than old TIC80_OPERAND_RELATIVE. Add support for new
2559 TIC80_OPERAND_BASEREL flag bit.
2561 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2563 * tic80-dis.c (print_insn_tic80): Print floating point operands
2565 * tic80-opc.c (SPFI): Add single precision floating point
2566 immediate operand type.
2567 (ROTATE): Add rotate operand type for shifts.
2568 (ENDMASK): Add for shifts.
2569 (n): Macro for the 'n' bit.
2570 (i): Macro for the 'i' bit.
2571 (PD): Macro for the 'PD' field.
2572 (P2): Macro for the 'P2' field.
2573 (P1): Macro for the 'P1' field.
2574 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2577 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2579 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2580 adding in current address for pc-relative operands.
2582 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2584 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2585 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2586 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2587 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2588 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2589 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2590 (REG_SCALED, LSI_SCALED): New operand types.
2591 (E): New macro for 'E' bit at bit 27.
2592 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2593 opcodes, including the various size flavors (b,h,w,d) for
2594 the direct load and store instructions.
2596 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2598 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2600 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2601 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2602 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2603 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2604 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2605 masks with "MASK_* & ~M_*" to get the M bit reset.
2606 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2608 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2610 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2611 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2612 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2614 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2615 CC, SICR, and LICR table entries.
2616 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2617 "bcnd", and "brcr" opcodes.
2619 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2621 * ppc-opc.c (powerpc_operands): Make comment match the
2622 actual fields (no shift field).
2623 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2624 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2625 partial implementation, work in progress.
2626 * tic80-opc.c (tic80_operands): Begin construction operands table.
2627 (tic80_opcodes): Continue populating opcodes table and start
2628 filling in the operand indices.
2629 (tic80_num_opcodes): Add this.
2631 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2633 * m68k-opc.c: Add #B case for moveq.
2635 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2637 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2638 before they are used.
2640 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2642 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2643 for "breakpoint" instruction.
2645 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2647 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2648 (dep): Use ALL_CFLAGS rather than CFLAGS.
2650 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2652 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2655 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2657 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2658 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2660 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2662 * mips16-opc.c: Add "abs".
2664 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2666 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2667 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2668 (disassembler): Add bfd_arch_tic80 support to set disassemble
2669 to print_insn_tic80.
2670 * tic80-dis.c (print_insn_tic80): Add stub.
2672 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2674 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2675 * configure: Regenerate with autoconf.
2676 * tic80-dis.c: Add file.
2677 * tic80-opc.c: Add file.
2679 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2681 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2683 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2685 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2686 (mn10200_opcodes): Use it for some logicals and btst insns.
2687 Add "break" and "trap" instructions.
2689 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2691 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2693 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2695 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2696 relative load or add now depends upon whether the instruction is
2699 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2701 * mn10200-dis.c: Finish writing disassembler.
2702 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2703 Fix mask for "jmp (an)".
2705 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2706 handle endianness issues for mn10300.
2708 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2710 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2712 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2713 instruction. Fix opcode field for "movb (imm24),dn".
2715 * mn10200-opc.c (mn10200_operands): Fix insertion position
2718 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2720 * mn10200-opc.c: Create mn10200 opcode table.
2721 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2722 but moving along nicely.
2724 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2726 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2728 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2730 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2731 specifiers for fmovem* instructions.
2733 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2735 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2737 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2739 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2742 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2744 * mn10300-opc.c: Add some comments explaining the various
2747 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2749 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2751 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2754 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2755 operand specifiers in fmovm* instructions.
2757 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2759 * ppc-opc.c (insert_li): Give an error if the offset has the two
2760 least significant bits set.
2762 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2764 * mips-dis.c (print_insn_mips16): Separate the instruction from
2765 the arguments with a tab, not a space.
2767 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2769 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2772 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2775 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2777 * configure: Rebuild with autoconf 2.12.
2779 Add support for mips16 (16 bit MIPS implementation):
2780 * mips16-opc.c: New file.
2781 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2782 (mips16_reg_names): New static array.
2783 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2784 after seeing a 16 bit symbol.
2785 (print_insn_little_mips): Likewise.
2786 (print_insn_mips16): New static function.
2787 (print_mips16_insn_arg): New static function.
2788 * mips-opc.c: Add jalx instruction.
2789 * Makefile.in (mips16-opc.o): New target.
2790 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2791 * configure: Rebuild.
2793 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2795 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2796 operand specifiers in *save, *restore and movem* instructions.
2798 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2801 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2802 register operands for immediate arithmetic, not, neg, negx, and
2803 set according to condition instructions.
2805 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2806 specifier of the effective-address operand in immediate forms of
2807 arithmetic instructions. The specifier for the immediate operand
2808 notes how and where the constant will be stored.
2810 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2812 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2815 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2818 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2820 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2822 * mn10300-dis.c (disassemble): Handle register lists.
2824 * mn10300-opc.c: Fix handling of register list operand for
2825 "call", "ret", and "rets" instructions.
2827 * mn10300-dis.c (disassemble): Print PC-relative and memory
2828 addresses symbolically if possible.
2829 * mn10300-opc.c: Distinguish between absolute memory addresses,
2830 pc-relative offsets & random immediates.
2832 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2834 (disassemble): Handle SPLIT and EXTENDED operands.
2836 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2838 * mn10300-dis.c: Rough cut at printing some operands.
2840 * mn10300-dis.c: Start working on disassembler support.
2841 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2843 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2845 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2847 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2849 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2851 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2853 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2854 register argument is calls and jmp instructions.
2856 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2858 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2859 getx operand. Fix opcode for mulqu imm,dn.
2861 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2863 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2864 in MN10300_OPERAND_SPLIT operands for how many bits
2865 appear in the basic insn word. Add IMM32_HIGH24,
2866 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2867 (mn10300_opcodes): Use new operands as needed.
2869 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2870 for bset, bclr, btst instructions.
2871 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2873 * mn10300-opc.c (mn10300_operands): Remove many redundant
2874 operands. Update opcode table as appropriate.
2875 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2876 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2878 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2880 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2881 operands (for indexed load/stores). Fix bitpos for DI
2882 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2883 few instructions that insert immediates/displacements in the
2884 middle of the instruction. Add IMM8E for 8 bit immediate in
2885 the extended part of an instruction.
2886 (mn10300_operands): Use new opcodes as appropriate.
2888 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2890 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2891 sequential so the assembler never parallelizes it with
2894 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2896 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2897 a data/address register that appears in register field 0
2898 and register field 1.
2899 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2901 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2903 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2904 standard disassembly.
2906 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2907 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2908 Recategorize PALcode instructions.
2910 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2912 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2914 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2916 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2917 there are no operand types.
2919 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2921 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2923 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2925 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2927 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2929 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2931 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2932 and sst.w instructions.
2934 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2937 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2939 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2942 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2944 * ppc-opc.c (PPCPWR2): Define.
2945 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2948 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2950 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2951 field for movhu instruction.
2953 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2954 cast value to "long" not "signed long" to keep hpux10
2957 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2959 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2962 * mn10300-opc.c (FMT*): Remove definitions.
2964 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2965 for shift-by-register opcodes.
2967 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2968 into [AD][MN][01] for encoding the position of the register
2971 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2973 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2974 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2976 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2978 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2979 Fix various typos. Add "PAREN" operand.
2980 (MEM, MEM2): Define.
2981 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2982 operands. Fix several typos.
2984 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2987 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2989 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2990 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2992 (mn10300_opcodes): Break opcode format out into its own field.
2993 Update many operand fields to deal with signed vs unsigned
2994 issues. Fix one or two typos in the "mov" instruction
2995 opcode, mask and/or operand fields.
2997 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2999 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3000 m68851 wasn't reset.
3002 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3005 all opcodes. Very rough cut at operands for all opcodes.
3007 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3010 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3012 * mn10200-opc.c, mn10300-opc.c: New files.
3013 * mn10200-dis.c, mn10300-dis.c: New files.
3014 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3015 * disassemble.c: Break mn10x00 support into 10200 and 10300
3017 * configure.in: Likewise.
3018 * configure: Rebuilt.
3020 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3022 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3024 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3026 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3028 * disassemble (ARCH_mn10x00): Define.
3029 (disassembler): Handle bfd_arch_mn10x00.
3030 * configure.in: Recognize bfd_mn10x00_arch.
3031 * configure: Rebuilt.
3033 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3035 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3036 accordingly. Don't declare functions using op_rtn.
3038 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3040 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3041 params to be more standard.
3042 * (disassemble): Print absolute addresses and symbolic names for
3043 branch and jump targets.
3044 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3046 * (v850_opcodes): Add breakpoint insn.
3048 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3050 * m68k-opc.c: Move the fmovemx data register cases before the
3051 other cases, so that they get recognized before the data register
3052 does gets treated as a degenerate register list.
3054 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3056 * mips-opc.c: Add a case for "div" and "divu" with two registers
3057 and a destination of $0.
3059 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3061 * mips-dis.c (print_insn_arg): Add prototype.
3062 (_print_insn_mips): Ditto.
3064 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3066 * mips-dis.c (print_insn_arg): Print condition code registers as
3069 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3071 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3073 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3075 * v850-dis.c (disassemble): Make static. Provide prototype.
3077 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3079 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3082 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3084 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3085 ']' characters into the output stream.
3086 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3087 Add "memop" field to all opcodes (for the disassembler).
3088 Reorder opcodes so that "nop" comes before "mov" and "jr"
3089 comes before "jarl".
3091 * v850-dis.c (print_insn_v850): Fix typo in last change.
3093 * v850-dis.c (print_insn_v850): Properly handle disassembling
3094 a two byte insn at the end of a memory region when the memory
3095 region's size is only two byte aligned.
3097 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3099 * v850-dis.c (v850_reg_names): Define.
3100 (v850_sreg_names, v850_cc_names): Likewise.
3101 (disassemble): Very rough cut at printing operands (unformatted).
3103 * v850-opc.c (BOP_MASK): Fix.
3104 (v850_opcodes): Fix mask for jarl and jr.
3106 * v850-dis.c: New file. Skeleton for disassembler support.
3107 * Makefile.in Remove v850 references, they're not needed here.
3108 * configure.in: Add v850-dis.o when building v850 toolchains.
3109 * configure: Rebuilt.
3110 * disassemble.c (disassembler): Call v850 disassembler.
3112 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3113 (insert_d8_6, extract_d8_6): New functions.
3114 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3115 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3117 (IF4A, IF4B): Use "D7" instead of "D7S".
3118 (IF4C, IF4D): Use "D8_7" instead of "D8".
3119 (IF4E, IF4F): New. Use "D8_6".
3120 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3121 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3123 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3124 (v850_operands): Change D16 to D16_15, use special insert/extract
3125 routines. New new D16 that uses the generic insert/extract code.
3126 (IF7A, IF7B): Use D16_15.
3127 (IF7C, IF7D): New. Use D16.
3128 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3130 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3131 message. Issue an error if the branch offset is odd.
3133 * v850-opc.c: Add notes about needing special insert/extract
3134 for all the load/store insns, except "ld.b" and "st.b".
3136 * v850-opc.c (insert_d22, extract_d22): New functions.
3137 (v850_operands): Use insert_d22 and extract_d22 for
3139 (insert_d9): Fix range check.
3141 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3143 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3144 and set bits field to D9 and D22 operands.
3146 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3148 * v850-opc.c (v850_operands): Define SR2 operand.
3149 (v850_opcodes): "ldsr" uses R1,SR2.
3151 * v850-opc.c (v850_opcodes): Fix opcode specs for
3152 sld.w, sst.b, sst.h, sst.w, and nop.
3154 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3156 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3157 end of the opcode table.
3159 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3161 * d10v-opc.c (pre_defined_registers): Added register pairs,
3162 "r0-r1", "r2-r3", etc.
3164 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3166 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3167 Create I16U for an unsigned 16bit mmediate operand.
3168 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3170 * v850-opc.c (v850_operands): Define EP operand.
3171 (IF4A, IF4B, IF4C, IF4D): Use EP.
3173 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3174 with immediate operand, "movhi". Tweak "ldsr".
3176 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3177 correct. Get sld.[bhw] and sst.[bhw] closer.
3179 * v850-opc.c (v850_operands): "not" is a two byte insn
3181 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3183 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3185 * v850-opc.c (two): Get order of words correct.
3187 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3189 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3190 register source and destination operands.
3191 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3193 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3194 same thinko in "trap" opcode.
3196 * v850-opc.c (v850_opcodes): Add initializer for size field
3199 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3200 Add D8 for 8-bit unsigned field in short load/store insns.
3201 (IF4A, IF4D): These both need two registers.
3202 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3203 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3204 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3205 for "ldsr" and "stsr".
3206 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3209 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3210 short store word (sst.w).
3212 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3214 * v850-opc.c (v850_operands): Added insert and extract fields,
3215 pointers to functions that handle unusual operand encodings.
3217 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3219 * v850-opc.c (v850_opcodes): Enable "trap".
3221 * v850-opc.c (v850_opcodes): Fix order of displacement
3222 and register for "set1", "clr1", "not1", and "tst1".
3224 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3226 * v850-opc.c (v850_operands): Add "B3" support.
3227 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3230 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3232 * v850-opc.c: Close unterminated comment.
3234 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3236 * v850-opc.c (v850_operands): Add flags field.
3237 (v850_opcodes): add move opcodes.
3239 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3241 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3242 * configure: (bfd_v850v_arch) Add new case.
3243 * configure.in: (bfd_v850_arch) Add new case.
3244 * v850-opc.c: New file.
3246 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3248 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3250 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3252 * d10v-opc.c: Add additional information to the opcode
3253 table to help determinine which instructions can be done
3256 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3258 * mpw-make.sed: Update editing of include pathnames to be
3261 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3263 * arm-opc.h: Added "bx" instruction definition.
3265 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3267 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3269 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3271 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3273 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3275 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3277 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3279 * makefile.vms: Update for alpha-opc changes.
3281 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3283 * i386-dis.c (print_insn_i386): Actually return the correct value.
3284 (ONE, OP_ONE): #ifdef out; not used.
3286 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3288 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3289 Changed subi operand type to treat 0 as 16.
3291 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3293 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3296 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3298 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3299 memory transfer instructions. Add new format string entries %h and %s.
3300 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3303 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3305 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3306 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3308 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3310 * alpha-dis.c (print_insn_alpha_osf): Remove.
3311 (print_insn_alpha_vms): Remove.
3312 (print_insn_alpha): Make globally visible. Chose the register
3313 names based on info->flavour.
3314 * disassemble.c: Always return print_insn_alpha for the alpha.
3316 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3318 * d10v-dis.c (dis_long): Handle unknown opcodes.
3320 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3322 * d10v-opc.c: Changes to support signed and unsigned numbers.
3323 All instructions with the same name that have long and short forms
3324 now end in ".l" or ".s". Divs added.
3325 * d10v-dis.c: Changes to support signed and unsigned numbers.
3327 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3329 * d10v-dis.c: Change all functions to use info->print_address_func.
3331 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3333 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3334 move ccr/sr insns more strict so that the disassembler only
3335 selects them when the addressing mode is data register.
3337 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3338 * d10v-opc.c (pre_defined_registers): Declare.
3339 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3340 to pick a better name for the registers.
3342 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3344 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3345 operands for fexpand and fpmerge. From Christian Kuehnke
3346 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3348 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3350 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3351 print routine. Take new regnames and cpumask arguments.
3352 Kill the environment variable nonsense.
3353 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3354 (print_insn_alpha_vms): New function. Do VMS style regnames.
3355 * disassemble.c (disassembler): Test bfd flavour to pick
3356 between OSF and VMS routines. Default to OSF.
3358 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3360 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3361 * configure: Rebuild.
3362 * Makefile.in (install): Use @INSTALL_SHLIB@.
3364 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3366 * configure: (bfd_d10v_arch) Add new case.
3367 * configure.in: (bfd_d10v_arch) Add new case.
3368 * d10v-dis.c: New file.
3369 * d10v-opc.c: New file.
3370 * disassemble.c (disassembler) Add entry for d10v.
3372 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3374 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3375 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3377 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3379 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3380 distinguish between variants of the instruction set.
3381 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3382 distinguish between variants of the instruction set.
3384 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3386 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3387 the 8086 instruction set.
3388 * i386-dis.c: General cleanups. Make most things static. Add
3389 prototypes. Get rid of static variables aflags and dflags. Pass
3390 them as args (to almost everything).
3392 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3394 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3396 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3398 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3399 if the next arg is marked with SRC_IN_DST. Gross.
3401 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3402 we're looking for and find EXR.
3404 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3405 if we're looking for KBIT and we don't find it.
3407 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3410 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3411 3bit immediate operands.
3413 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3415 * Released binutils 2.7.
3417 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3418 <kkaempf@progis.ac-net.de>.
3420 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3422 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3424 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3426 * sparc-dis.c (print_insn_sparclite): New routine to print
3427 sparclite instructions.
3429 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3431 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3433 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3435 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3436 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3437 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3439 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3441 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3442 Use autoconf-set values.
3443 (docdir, oldincludedir): Removed.
3444 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3446 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3448 * alpha-opc.c: New file.
3449 * alpha-opc.h: Remove.
3450 * alpha-dis.c: Complete rewrite to use new opcode table.
3451 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3452 * configure: Rebuild with autoconf 2.10.
3453 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3454 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3456 (alpha-opc.o): New target.
3458 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3460 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3461 Set imm_added_to_rs1 even if the source and destination register
3464 * sparc-opc.c: Add some two operand forms of the wr instruction.
3466 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3468 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3471 * disassemble.c (disassembler): Handle H8/S.
3472 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3474 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3476 * sparc-opc.c: Add beq/teq as aliases for be/te.
3478 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3479 <sergei@msil.sps.mot.com>.
3481 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3483 * makefile.vms: New file.
3485 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3487 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3489 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3492 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3494 * i386-dis.c (OP_OFF): Call append_prefix.
3496 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3498 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3499 unsigned long to silence a warning from the Solaris PowerPC
3502 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3504 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3506 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3508 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3510 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3511 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3512 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3513 cpush, cpusha, cpull sparclet insns.
3515 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3517 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3519 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3521 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3522 Set F_FLOAT on other floating point instructions.
3524 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3526 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3528 (powerpc_opcodes): Add 860/821 specific SPRs.
3530 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3532 * configure.in: Permit --enable-shared to specify a list of
3533 directories. Set and substitute BFD_PICLIST.
3534 * configure: Rebuild.
3535 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3536 uses. Set to @BFD_PICLIST@.
3538 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3540 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3541 not "abs", which may be needed for the absolute in something
3542 like btst #0,@10:8. Print L_3 immediates separately from other
3543 immediates. Change ABSMOV reference to ABS8MEM.
3545 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3547 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3548 (current_arch_mask): New static global.
3549 (compute_arch_mask): New static function.
3550 (print_insn_sparc): Delete sparc_v9_p. New static local
3551 current_mach. Resort opcode table if current_mach changes.
3552 Generalize "insn not supported" test.
3553 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3554 Delete test for v9/!v9.
3555 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3557 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3558 (brfcx): Renamed to FBRX.
3559 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3560 coprocessor mnemonics are not supported on the sparclet).
3561 (condf): Renamed to CONDF.
3562 (SLCBCC2): Delete F_ALIAS flag.
3564 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3566 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3567 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3569 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3571 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3572 that the shared library version number is set correctly.
3574 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3577 Miles Bader <miles@gnu.ai.mit.edu>.
3578 * configure: Rebuild.
3580 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3582 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3585 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3587 * configure: Rebuild with autoconf 2.8.
3589 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3591 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3592 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3594 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3596 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3597 since they appear as targets in Makefile.in.
3598 * configure: Rebuild.
3600 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3602 * mpw-make.sed: Edit out shared library support bits.
3604 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3606 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3607 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3608 (sparc_opcodes): Add sparclet insns.
3609 (sparclet_cpreg_table): New static local.
3610 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3611 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3613 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3615 * i386-dis.c (index16): New static variable.
3616 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3618 (OP_indirE): Return result of OP_E.
3619 (OP_E): Check for 16 bit addressing mode, and disassemble
3620 correctly. Optimised 32 bit case a little. Don't print
3621 "(base,index,scale)" when sib specifies only an offset.
3623 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3625 * configure.in: Set and substitute SHLIB_DEP.
3626 * configure: Rebuild.
3627 * Makefile.in (SHLIB_DEP): New variable.
3628 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3629 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3630 COMMON_SHLIB, add them to piclist with appropriate modifications.
3631 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3632 here: just use piclist.
3634 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3636 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3637 (print_insn_sparc): Rewrite v9/not-v9 tests.
3638 (compare_opcodes): Likewise.
3639 * sparc-opc.c (MASK_<ARCH>): Define.
3640 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3641 (sparclet,v6notv9): Define.
3642 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3643 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3645 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3647 * configure.in: Call AC_PROG_CC before configure.host.
3648 * configure: Rebuild.
3650 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3652 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3654 * i386-dis.c (onebyte_has_modrm): New static array.
3655 (twobyte_has_modrm): New static array.
3656 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3658 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3660 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3663 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3665 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3668 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3670 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3671 m68010up, not just m68020up | cpu32.
3673 * Makefile.in (SONAME): New variable.
3674 ($(SHLINK)): Make a link to the transformed name, as well.
3675 (stamp-tshlink): New target.
3676 (install): Skip stamp-tshlink during install.
3678 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3680 * configure.in: Call AC_ARG_PROGRAM.
3681 * configure: Rebuild.
3682 * Makefile.in (program_transform_name): New variable.
3683 (install): Transform library name before installing it.
3685 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3687 * i960-dis.c (mem): Add HX dcinva instruction.
3689 Support for building as a shared library, based on patches from
3690 Alan Modra <alan@spri.levels.unisa.edu.au>:
3691 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3692 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3693 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3694 * configure: Rebuild.
3695 * Makefile.in (ALLLIBS): New variable.
3696 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3697 (COMMON_SHLIB, SHLINK): New variables.
3698 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3699 (STAGESTUFF): Remove variable.
3700 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3701 (stamp-piclist, piclist): New targets.
3702 ($(SHLIB), $(SHLINK)): New targets.
3703 ($(OFILES)): Depend upon stamp-picdir.
3704 (disassemble.o): Build twice if PICFLAG is set.
3705 (MOSTLYCLEAN): Add pic/*.o.
3706 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3707 (distclean): Remove pic and stamp-picdir.
3708 (install): Install shared libraries.
3709 (stamp-picdir): New target.
3711 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3713 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3714 Print unknown instruction as "unknown", rather than in hex.
3716 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3718 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3720 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3722 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3724 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3726 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3727 when necessary. From Ulrich Drepper
3728 <drepper@myware.rz.uni-karlsruhe.de>.
3730 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3732 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3733 sparc_num_opcodes. Update architecture enum values.
3734 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3735 (sparc_opcode_lookup_arch): New function.
3736 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3737 (sparc_opcodes): Add v9a shutdown insn.
3739 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3741 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3742 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3744 (print_insn_sparc64): Deleted.
3745 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3748 * sparc-opc.c (architecture_pname): Add v9a.
3750 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3752 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3753 incorrectly defined as 0x16 when it should be 0x15.
3754 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3755 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3756 excb (exception barrier) which is defined in the Alpha
3757 Architecture Handbook version 2.
3758 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3759 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3760 disassembled as or, for example.
3762 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3764 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3765 (_print_insn_mips): Change i from int to unsigned int.
3767 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3769 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3770 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3772 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3774 * i386-dis.c: Added Pentium Pro instructions.
3776 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3778 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3781 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3783 * sh-opc.h (sh_nibble_type): Added REG_B.
3784 (sh_arg_type): Added A_REG_B.
3785 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3787 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3789 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3791 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3793 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3795 * Makefile.in (distclean): Remove stamp-h. From Ronald
3796 F. Guilmette <rfg@monkeys.com>.
3798 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3800 From David Mosberger-Tang <davidm@azstarnet.com>:
3801 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3804 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3806 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3807 (sh_table): Added many SH3 opcodes.
3808 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3810 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3812 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3813 (subco,subco.): Mark this PPC, not PPCCOM.
3815 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3817 * configure: Rebuild with autoconf 2.7.
3819 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3821 * configure: Rebuild with autoconf 2.6.
3823 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3825 * configure.in: Sort list of architectures. Accept but do nothing
3826 for alliant, convex, pyramid, romp, and tahoe.
3828 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3830 * a29k-dis.c (print_special): Change num to unsigned int.
3832 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3834 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3837 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3839 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3840 * configure: Rebuilt.
3842 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3844 * configure.in: Add case for bfd_i860_arch.
3845 * configure: Rebuild.
3847 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3849 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3850 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3851 (NEXTDOUBLE): Likewise.
3852 (print_insn_m68k): Don't match fmoveml if there is more than one
3853 register in the list.
3854 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3856 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3858 * m68k-opc.c: Use #W rather than #w.
3859 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3861 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3863 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3864 and likewise for all the dbxx opcodes.
3866 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3868 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3870 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3872 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3873 the VR4100 specific instructions to the mips_opcodes structure.
3875 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3877 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3878 ugly Metrowerks bug in CW6, is fixed in CW7.
3880 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3882 * ppc-opc.c (whole file): Add flags for common/any support.
3884 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3886 * Makefile.in (BISON): Remove macro.
3887 (FLAGS_TO_PASS): Remove BISON.
3889 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3891 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3893 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3894 instructions that take no args by looking at the match mask.
3895 (print_insn_arg): Always print "%" before register names.
3896 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3897 [case '_']: Don't print "@#" before address.
3898 [case 'J']: Use "%s" as format string, not register name.
3899 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3901 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3903 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3906 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3908 From David Mosberger-Tang <davidm@azstarnet.com>
3910 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3911 (alpha_insn_set): added definitions for VAX floating point
3912 instructions (Unix compilers don't generate these, but handcoded
3913 assembly might still use them).
3915 * alpha-dis.c (print_insn_alpha): added support for disassembling
3916 the miscellaneous instructions in the Alpha instruction set.
3918 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3920 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3921 no longer create sysdep.h, sed ppc-opc.c to work around a
3922 serious Metrowerks C bug.
3923 * mpw-make.in: Remove.
3924 * mpw-make.sed: New file, used by mpw-configure to edit
3925 Makefile.in into an MPW makefile.
3927 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3929 * Makefile.in (maintainer-clean): New synonym for realclean.
3931 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3933 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3934 which use '0', '1', and '2' instead. Specify the proper size for
3935 a pmove immediate operand. Correct the pmovefd patterns to be
3936 moves to a register, not from a register.
3937 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3939 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3941 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3942 %psr, %wim, %tbr as F_NOTV9.
3944 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3946 * Makefile.in (Makefile): Just rebuild Makefile when running
3948 (config.h, stamp-h): New targets.
3949 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3950 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3951 rebuilding config.h.
3952 * configure: Rebuild.
3954 * mips-opc.c: Change unaligned loads and stores with "t,A"
3955 operands to use "t,A(b)".
3957 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3959 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3961 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3963 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3964 until 3 instead of until 2.
3966 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3968 * Makefile.in (ALL_CFLAGS): Define.
3969 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3970 (MOSTLYCLEAN): Add config.log.
3971 (distclean): Don't remove config.log.
3972 * configure.in: Substitute HDEFINES.
3973 * configure: Rebuild.
3975 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3977 * sh-opc.h (sh_arg_type): Add F_FR0.
3978 (sh_table, case fmac): Add F_FR0 as first argument.
3980 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3982 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3984 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3986 * sparc-dis.c: Remove all references to NO_V9.
3988 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3990 * aclocal.m4: Just include ../bfd/aclocal.m4.
3991 * configure: Rebuild.
3993 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3995 * sparc-dis.c (X_DISP19): Define.
3996 (print_insn, case 'G'): Use it.
3997 (print_insn, case 'L'): Sign extend displacement.
3999 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4001 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4002 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4003 host_makefile_frag or frags.
4004 * aclocal.m4: New file.
4005 * configure: Rebuild.
4006 * Makefile.in (INSTALL): Set to @INSTALL@.
4007 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4008 (INSTALL_DATA): Set to @INSTALL_DATA@.
4010 (AR_FLAGS): Set to rc rather than qc.
4011 (CC): Define as @CC@.
4012 (CFLAGS): Set to @CFLAGS@.
4013 (@host_makefile_frag@): Remove.
4014 (config.status): Remove dependency upon @frags@.
4016 * configure.in: ../bfd/config.bfd now just sets shell variables.
4017 Use them rather than looking through target Makefile fragments.
4018 * configure: Rebuild.
4020 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4022 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4024 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4026 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4027 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4030 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4031 (lookup_{name,value}): New functions.
4032 (prefetch_table): New static local.
4033 (sparc_{encode,decode}_prefetch): New functions.
4034 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4036 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4038 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4041 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4043 * sh-dis.c: Correct comment on first line of file.
4045 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4047 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4049 * sparc-opc.c (asi, membar): New static locals.
4050 (sparc_{encode,decode}_{asi,membar}): New functions.
4051 (sparc_opcodes, membar insn): Fix.
4052 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4053 Support decoding of membar masks.
4056 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4058 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4060 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4062 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4063 and likewise for the other branches. Add bhs as an alias for bcc,
4064 and likewise for the size variants. Add dbhs as an alias for
4067 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4069 * sh-opc.h (FP sts instructions): Update to match reality.
4071 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4073 * m68k-dis.c: (fpcr_names): Add % before all register names.
4074 (reg_names): Likewise.
4075 (print_insn_arg): Don't explicitly print % before register names.
4076 Add % before register names in static array names. In case 'r',
4077 print data registers as `@(Dn)', not `Dn@'. When printing a
4078 memory address, don't print @# before it.
4079 (print_indexed): Change base_disp and outer_disp from int to
4080 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4081 syntax. Sign extend 8 byte displacement correctly.
4082 (print_base): Print using MIT syntax. Print zpc when appropriate.
4083 Change parameter disp from int to bfd_vma.
4085 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4088 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4090 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4091 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4092 * sh-opc.h (sh_arg_type): Add new operand types.
4093 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4095 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4097 * Makefile.in (distclean): Remove generated file config.h.
4099 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4101 * Makefile.in (distclean): Remove generated file config.h.
4103 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4105 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4107 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4109 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4110 rather than numopcodes. Use m68k_opcodes rather than removed
4111 opcode function. Don't check F_ALIAS.
4112 (print_insn_arg): Change first parameter to be const char *.
4113 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4114 (m68k-opc.o): New target.
4115 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4116 * configure: Rebuild.
4118 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4120 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4121 (opcode_bits, opcode_hash_table): New variables.
4122 (opcodes_initialized): Renamed from opcodes_sorted.
4123 (build_hash_table): New function.
4124 (is_delayed_branch): Use hash table.
4125 (print_insn): Renamed from print_insn_sparc, made static.
4126 Build and use hash table. If !sparc64, ignore sparc64 insns,
4127 and vice-versa if sparc64.
4128 (print_insn_sparc, print_insn_sparc64): New functions.
4129 (compare_opcodes): Move sparc64 opcodes to end.
4130 Print commutative insns with constant second.
4131 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4133 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4135 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4136 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4137 avoids printing a delay slot in a delay slot.
4138 * sh-opc.h (sh_table): Fully bracket last entry.
4140 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4142 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4144 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4146 * configure.in: Get host_makefile_frag from ${srcdir}.
4148 * configure.in: Autoconfiscated. Check for string[s].h. Create
4149 config.h from config.in. Don't set up sysdep.h link.
4150 * sysdep.h: New file.
4151 * configure, config.in: New files, generated from configure.in.
4152 * Makefile.in: Updated to be processed autoconf-style.
4153 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4154 (Makefile): Depend on config.status.
4155 (config.status): New rule.
4156 * configure.bat: Update Makefile substitutions.
4158 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4160 * mips-opc.c (L1): Define.
4161 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4162 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4165 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4167 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4168 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4169 have multiple add units but only a single logical unit.
4171 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4172 shifted by 18, without any insertion or extraction function.
4173 (insert_cr, extract_cr): Remove.
4175 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4177 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4180 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4182 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4183 * sh-opc.h: Add copyright.
4185 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4187 * Makefile.in (crunch-m68k): Delete extra target accidentally
4188 checked in a while ago.
4190 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4192 * sh-opc.h (sh_table): Add SH3 support.
4194 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4196 * sh-opc.h: Added bsrf and braf.
4198 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4200 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4201 bogus [ls]fm{ea,fd} patterns.
4203 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4204 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4205 initialize it from memory. Make function static.
4206 (print_insn_{big,little}_arm): New functions.
4207 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4208 the correct endianness.
4210 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4212 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4215 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4217 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4218 17th, so that it builds again using GCC as the compiler.
4220 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4222 * mips-dis.c (print_insn_little_mips): Cast return value from
4223 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4224 expects an unsigned long, and that might be fewer words of
4225 argument storage (e.g., if bfd_vma is long long on a 32-bit
4227 (print_insn_big_mips): Likewise with bfd_getb32 value.
4228 (_print_insn_mips): Now static.
4230 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4232 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4233 gcc memory hog problem with initializer is fixed.
4235 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4237 Merge in support for Mac MPW as a host.
4238 (Old change descriptions retained for informational value.)
4240 * mpw-config.in (archname): Compute from the config.
4241 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4243 * mpw-config.in (target_arch): Compute from canonical target.
4244 (m68k, mips, powerpc, sparc): Add architectures.
4245 * mpw-make.in (disassemble.c.o): Add.
4246 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4248 * mpw-config.in (BFD_MACHINES): Set to a default value.
4249 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4251 * mpw-make.in (CSEARCH): Add extra-include to search path.
4253 * mpw-config.in (varargs.h): Don't create.
4254 (sysdep.h): Create using forward-include.
4255 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4257 * mpw-config.in: New file, MPW version of configure.in.
4258 * mpw-make.in: New file, MPW version of Makefile.in.
4260 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4262 * alpha-dis.c (print_insn_alpha): Put empty statement after
4265 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4267 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4268 (low_sign_extend): Likewise.
4269 (get_field): Delete unused function.
4270 (set_field, deposit_14, deposit_21): Likewise.
4272 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4274 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4277 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4279 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4281 * alpha-opc.h (OSF_ASMCODE): define
4282 print pal-code names as defined in App C of the
4283 Alpha Architecture Reference Manual
4285 * alpha-dis.c: cleaned up output
4286 print stylized code forms as defined in App A.4.3 of the
4287 Alpha Architecture Reference Manual
4289 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4291 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4293 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4296 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4298 * m68k-dis.c (opcode): New function. Returns address of opcode
4299 table entry given index, even if the opcode table was split to
4300 work around gcc bugs.
4301 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4303 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4304 (reg_names): Now const.
4305 (print_insn_arg): Arrays cacheFieldName and names now const.
4306 (print_indexed): Array scales now const.
4308 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4310 * ppc-opc.c: Sort recently added instructions by minor opcode
4311 number within major opcode number.
4313 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4315 * hppa-dis.c: Include libhppa.h.
4317 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4319 * mips-opc.c: Change dli to use M_DLI, and add dla.
4321 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4323 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4325 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4327 * mips-opc.c: Add r4650 mul instruction.
4329 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * mips-opc.c: Add uld and usd macros for unaligned double load and
4334 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4336 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4337 mfdcr, mtdcr, icbt, iccci.
4339 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4341 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4342 signed char fields to shorts, more portable.
4344 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4346 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4347 char fields as signed chars, since they may have negative values.
4349 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4351 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4352 (mycroft@netbsd.org).
4354 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4356 From "Logg, Ed" <elogg@ea.com>:
4357 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4358 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4361 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4363 * ppc-opc.c: Changes based on patch from David Edelsohn
4364 <edelsohn@mhpcc.edu>.
4365 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4368 (insert_tbr): New static function.
4369 (extract_tbr): New static function.
4370 (XFXFXM_MASK, XFXM): Define.
4371 (XSPRBAT_MASK, XSPRG_MASK): Define.
4372 (powerpc_opcodes): Add instructions to access special registers by
4373 name. Add mtcr and mftbu.
4375 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4377 * mips-opc.c (P3): Define.
4378 (mips_opcodes): Add mad and madu.
4380 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4382 * configure.in: Add W65 support.
4383 * disassemble.c: Likewise.
4384 * w65-opc.h, w65-dis.c: New files.
4386 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4388 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4391 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4393 * mips-opc.c: Add dli as a synonym for li.
4395 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4397 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4398 print something for reserved opcode values, even if it won't
4401 * mips-dis.c (_print_insn_mips): When initializing, shift right
4402 and mask, to avoid sign extension problems on the Alpha.
4404 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4407 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4409 * sh-opc.h (mov.l gbr): Get direction right.
4410 * sh-dis.c (print_insn_shx): New function.
4411 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4412 print opcodes with right byte order.
4414 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4416 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4417 to avoid conflicts with getopt.
4419 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4421 * hppa-dis.c (print_insn_hppa): Read the instruction using
4422 bfd_getb32, so that it works on a little endian or 64 bit host.
4423 Remove unused local variable op.
4425 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4427 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4428 addu does not work correctly if -mips3.
4430 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4432 * a29k-dis.c (print_special): Add special register names defined
4433 on 29030, 29040 and 29050.
4434 (print_insn): Handle new operand type 'I'.
4436 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4438 * Makefile.in (INSTALL): Use top level install.sh script.
4440 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4442 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4443 that it works on a little endian host.
4445 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4447 * configure.in: Use ${config_shell} when running config.bfd.
4449 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4451 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4453 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4455 * a29k-dis.c (print_insn): Print the opcode.
4457 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4459 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4461 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4463 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4465 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4467 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4468 which store a value into memory.
4470 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4472 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4473 * arm-dis.c, arm-opc.h: New files.
4475 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4477 * Makefile.in (ns32k-dis.o): Add dependency.
4478 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4479 string, not as array of chars.
4481 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4483 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4485 * sparc-opc.c: Added sparclite extended FP operations, and
4486 versions of v9 impdep* instructions permitting specification of
4489 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4491 * i960-dis.c (reg_names): Now const.
4492 (struct sparse_tabent): New type, copied from array type in mem
4494 (ctrl): Local static array ctrl_tab now const.
4495 (cobr): Local static array cobr_tab now const.
4496 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4497 static variable mem_tab no longer explicitly initialized. Changed
4498 mem_init to const array of struct sparse_tabent.
4499 (reg): Local static variable reg_tab no longer explicitly
4500 initialized. Changed reg_init to const array of struct
4502 (ea): Local static array scale_tab now const.
4504 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4507 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4509 * configure.bat: the disassember needs to be enabled for
4510 "objdump -d" to work in djgpp.
4512 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4514 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4515 (invalid_float): Enabled general version, doesn't require running
4516 on ns32k host. Changed to take char* argument, and test for
4517 explicitly specified sizes, instead of using sizeof() on host CPU
4519 (INVALID_FLOAT): Cast first argument.
4520 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4521 list_P032, list_M032): Now const.
4522 (optlist, list_search): Made appropriate arguments now point to
4524 (print_insn_arg): Changed static array of one-character-string
4525 pointers into a static const array of characters; fixed sprintf
4526 statement accordingly.
4528 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4530 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4531 from distribution. A ns32k-dis.c from a previous distribution has
4532 been brought up to date and supports the new interface.
4534 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4536 * configure.in: add bfd_ns32k_arch target support.
4538 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4539 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4541 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4543 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4546 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4548 * h8300-dis.c, mips-dis.c: Don't use true and false.
4550 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4552 * configure.in: Change --with-targets to --enable-targets.
4554 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4556 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4557 opcodes to the first instruction with that opcode, to speed
4558 disassembly of large files. From ralphc@pyramid.com (Ralph
4561 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4563 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4565 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4567 * configure.bat: update to latest makefile.in
4569 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4571 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4572 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4573 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4574 slot insn is in a delay slot.
4575 * z8k-opc.h: (resflg): Fix patterns.
4576 * h8500-opc.h Fix CR insn patterns.
4578 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4580 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4581 "cmpl" before POWER versions, so that gas -many uses them.
4583 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4585 * disassemble.c: New file.
4586 * Makefile.in (OFILES): Add disassemble.o.
4587 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4588 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4589 binutils/configure.in.
4591 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4592 opcode being examined.
4594 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4597 (insert_ral, insert_ram, insert_ras): New functions.
4598 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4599 RAS for store with update.
4601 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4603 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4604 (edelsohn@npac.syr.edu).
4606 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4611 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4613 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4615 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4617 * ppc-opc.c (powerpc_operands): The signedp field has been
4618 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4619 instead. Add new operand SISIGNOPT.
4620 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4621 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4622 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4625 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4627 * i386-dis.c (struct private): Renamed to dis_private. `private'
4628 is a reserved word for dynix cc.
4630 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4632 * configure.in: Change error message to refer to bfd/config.bfd
4633 rather than bfd/configure.in.
4635 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4637 * ppc-opc.c: Define POWER2 as short alias flag.
4638 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4641 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4643 * i960-dis.c (print_insn_i960): Don't read a second word for
4644 opcodes 0, 1, 2 and 3.
4646 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4650 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * m68881-ext.c: Removed; no longer used.
4653 * Makefile.in: Changed accordingly.
4655 * m68k-dis.c (ext_format_68881): Don't declare.
4656 (print_insn_m68k): If an instruction uses place 'i', it uses at
4657 least four fixed bytes.
4658 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4659 extended float, convert to double using floatformat_to_double, not
4660 ieee_extended_to_double, and fetch the data before converting it.
4662 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4665 davidj@ICSI.Berkeley.EDU (David Johnson).
4667 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4669 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4670 PowerPC uses bdnz[l][a].
4672 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4674 * dis-buf.c, i386-dis.c: Include sysdep.h.
4676 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4678 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4680 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4681 by Motorola PowerPC 601 with PPC_OPCODE_601.
4682 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4683 Disassemble Motorola PowerPC 601 instructions as well as normal
4684 PowerPC instructions.
4686 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4688 * i960-dis.c (reg, mem): Just use a static array instead of
4691 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4693 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4694 condition name index if this is for a negated condition.
4696 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4697 Floating point format for 'H' operand is backwards from normal
4698 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4699 operands (fmpyadd and fmpysub), handle bizarre register
4700 translation correctly for single precision format.
4702 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4703 or 'I' operands if the next format specifier is 'M' (fcmp
4704 condition completer).
4706 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4708 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4709 single number giving a bitmask for the MB and ME fields of an M
4710 form instruction. Change NB to accept 32, and turn it into 0;
4711 also turn 0 into 32 when disassembling. Seperated SH from NB.
4712 (insert_mbe, extract_mbe): New functions.
4713 (insert_nb, extract_nb): New functions.
4714 (SC_MASK): Mask out SA and LK bits.
4715 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4716 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4717 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4718 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4719 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4720 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4721 (powerpc_macros): Define table of macro definitions.
4722 (powerpc_num_macros): Define.
4724 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4725 if PPC_OPERAND_NEXT is set.
4727 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4729 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4730 char. Retrieve contents using bfd_getl32 instead of shifting.
4732 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 * ppc-opc.c: New file. Opcode table for PowerPC, including
4735 opcodes for POWER (RS/6000).
4736 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4737 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4738 (CFILES): Add ppc-dis.c.
4739 (ppc-dis.o, ppc-opc.o): New targets.
4740 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4742 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4744 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4745 No space before 'u', 'f', or 'N'.
4747 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4749 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4750 farther than we should.
4752 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4754 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4756 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4758 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4760 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4761 needs it, to prevent reading past the end of a section.
4763 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4765 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4766 Removed t,A case for la; always use t,A(b) case.
4768 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4770 From Ted Lemen <mellon@pepper.ncd.com>
4771 * mips-dis.c (print_insn_arg): Handle 'k'.
4772 * mips-opc.c: Make cache use k, not t.
4774 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4776 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4777 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4778 FLOAT_FORMAT_CODE to put out floating point register names.
4780 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4782 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4784 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4788 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4791 larger than 32. Moved dsxx32 variants first for disassembler.
4793 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4795 * z8kgen.c, z8k-opc.h: Add full lda information.
4797 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4799 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4800 movb instructions. Any necessary space will be emitted by
4801 the code to handle nullification completers.
4803 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4805 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4807 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4809 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4810 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4812 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4816 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4818 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4819 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4821 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4823 * m88k-dis.c (m88kdis): comment change. Remove space after
4825 (printop): handle new arg types DEC and XREG for m88110.
4827 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4829 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4830 type for absolute branch addresses. Delete special
4831 "ble" and "be" code in 'W' operand code.
4833 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * mips-opc.c: Set hazard information correctly for branch
4836 likely instructions.
4838 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4840 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4841 info->fprintf_func for printing and info->print_address_func for
4844 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4846 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4848 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4850 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4851 Corrected second case of "b" for disassembler.
4853 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4855 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4856 to BFD swapping routines to correspond to BFD name changes.
4858 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4860 * mips-opc.c: Change div machine instruction to be z,s,t rather
4861 than s,t. Change div macro to be d,v,t rather than d,s,t.
4862 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4863 rem and remu which generates only the corresponding div
4864 instruction. This is for compatibility with the MIPS assembler,
4865 which only generates the simple machine instruction when an
4866 explicit destination of $0 is used.
4867 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4869 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4871 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4872 WR_31 hazard for bal, bgezal, bltzal.
4874 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4876 * hppa-dis.c (print_insn_hppa): Use print function
4877 from within the disassemble_info, not fprintf_filtered.
4879 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4881 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4882 Law, law@cs.utah.edu.)
4884 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * mips-opc.c ("absu"): Removed.
4889 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4891 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4892 Changed hazard information to distinguish between memory load
4893 delays and coprocessor load delays.
4895 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4897 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4899 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4901 * configure.in: Don't pass cpu to config.bfd.
4903 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4905 * m88k-dis.c (m88kdis): Make class unsigned.
4907 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4909 * alpha-dis.c (print_insn_alpha): One branch format case was
4910 missing the instruction name.
4912 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4914 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4915 Add the arch-specific auxiliary files.
4916 (OFILES): Remove the arch-specific auxiliary files
4917 and use BFD_MACHINES instead of DIS_LIBS.
4918 * configure.in: Set BFD_MACHINES based on --with-targets option.
4920 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4922 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4925 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4927 * sparc-opc.c: Change CONST to const to deal with gcc
4928 -Dconst=__const -traditional.
4930 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4932 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4933 coprocessor instructions out of #if 0, and made them use new
4936 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4938 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4940 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4942 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4943 instruction, for use by the disassembler.
4945 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4946 hand-coded sign extensions that depended on 32-bit host ints.
4947 FIXME, we still depend on big-endian host bitfield ordering.
4948 (sparc_print_insn): Set the insn_info_valid field, and the
4949 other fields that describe the instruction being printed.
4951 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4953 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4954 `jmp' instead of just one of them.
4956 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4958 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4959 (fput_fp_reg_r): Renamed from fput_reg_r.
4960 (fput_fp_reg): New function.
4961 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4963 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4965 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4967 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4969 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4971 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4972 don't output a space.
4974 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4976 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4978 * mips-opc.c: New file, containing opcode table from
4979 ../include/opcode/mips.h.
4980 * Makefile.in: Add it.
4982 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4984 * m88k-dis.c: New file, moved in from gdb and changed to use the
4985 new dis-asm.h disassembler interface.
4986 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4987 (m88k-dis.o): New target.
4989 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4991 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4992 argument string const char * to correspond to opcode/mips.h.
4994 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4996 * mips-dis.c: Updated to account for name changes in new version
4998 * Makefile.in: Added header file dependencies.
5000 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5002 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5004 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5006 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5007 extend, rather than shifts.
5009 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5011 * Makefile.in: Undo 15 June change.
5013 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5015 * m68k-dis.c (print_insn_arg): Change return value to byte count
5017 * m68k-dis.c: Re-write to detect invalid operands before
5018 printing anything, so we can handle this the same way we
5019 handle invalid opcodes.
5021 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5023 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5025 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5027 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5030 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5032 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5034 * configure.in: Do make sysdep.h link.
5035 * Makefile.in: Search ../include. Don't search ../bfd.
5037 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5039 Changes from Jeff Law, law@cs.utah.edu:
5040 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5041 Do not print a space before the completers specified by
5044 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5046 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5047 defined, since gdb has been fixed.
5049 Changes from Jeff Law, law@cs.utah.edu:
5050 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5051 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5052 be a *disassemble_info, not a *FILE.
5053 * hppa-dis.c: Support 'd', '!', and 'a'.
5054 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5055 * hppa-dis.c: Delete cases which are no longer needed.
5057 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5059 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5061 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5063 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5066 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5068 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5069 * configure.in: No longer need to configure to get sysdep.h.
5071 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5073 * Patches from Jeffrey Law <law@cs.utah.edu>.
5074 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5075 templates for 1.1 FP computational instructions.
5077 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5079 * h8500-dis.c (print_insn_h8500): Address argument is type
5081 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5084 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5085 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5087 * sparc-dis.c (compare_opcodes): Move static declaration to
5090 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5092 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5093 instruction, remove unimp hack from 'l' argument.
5095 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5097 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5100 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5102 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5103 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5106 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5108 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5109 arrays of string pointers to 2-d arrays of chars, to save
5112 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5114 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5115 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5117 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5119 * hppa-dis.c: New file from Utah, adapted to new disassembler
5121 * Makefile.in: Include it.
5123 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5125 * sh-dis.c, sh-opc.h: New files.
5127 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5129 * alpha-dis.c, alpha-opc.h: New files.
5131 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5133 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5136 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5138 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5140 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5142 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5145 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5147 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5148 and double percent signs a few places.
5150 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5152 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5153 Use info->print_address_func not print_address.
5155 * dis-buf.c (generic_print_address): New function.
5157 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5159 * Makefile.in: Add sparc-dis.c.
5160 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5162 Add `add' instruction to the set that get checked
5163 for a preceding `sethi' in order to print an absolute address.
5164 * (print_insn): Disassembly prefers real instructions.
5165 (is_delayed_branch): Speed up.
5166 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5167 Still missing some float ops, and needs testing.
5168 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5169 F_ALIAS. Use printf, not fprintf, when not passing a file
5171 (compare_opcodes): Check that identical instructions have
5172 identical opcodes, complain otherwise.
5175 * Include reg_names.
5177 Use dis-asm.h/read_memory_func interface.
5179 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5181 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5182 deliberately return non-zero to setjmp from longjmp. Otherwise
5183 this code fails to compile.
5185 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5187 * m68k-dis.c: Fix prototype for fetch_arg().
5189 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5191 * dis-buf.c: New file, for new read_memory_func interface.
5192 Makefile.in (OFILES): Include it.
5193 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5194 Use new read_memory_func interface.
5196 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5198 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5199 * h8500-opc.h: Fix couple of opcodes.
5201 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5203 * Makefile.in: add dvi & installcheck targets
5205 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5207 * Makefile.in: Update for h8500-dis.c.
5209 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5211 * h8500-dis.c, h8500-opc.h: New files
5213 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5215 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5216 ../include/dis-asm.h.
5217 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5218 and ../gdb/m68k-pinsn.c).
5219 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5220 and ../gdb/i386-pinsn.c).
5221 * m68881-ext.c: New file. Moved definition of
5222 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5223 * Makefile.in: Adjust for new files.
5224 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5225 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5226 can be dis-assembled.
5228 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5230 * mips-dis.c (print_insn_arg): Now returns void.
5232 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5234 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5235 files that use the macros.
5237 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5239 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5240 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5241 (CFILES): Added mips-dis.c.
5243 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5245 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5246 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5248 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5250 * Makefile.in: Improve *clean rules.
5251 * configure.in: Allow a default host.
5253 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5255 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5256 files include other sysdep files
5258 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5260 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5262 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5264 * configure.in: For host support, use ../bfd/configure.host
5265 so it stays in sync with the ../bfd/hosts database.
5267 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5269 * configure.in: use cpu-vendor-os triple instead of nested cases
5271 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5273 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5274 *always* the wrong one.
5276 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5278 * z8kgen.c: added copyright info
5280 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5282 * z8k-dis.c (unparse_instr): prettier tabs
5283 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5285 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5287 * configure.in: Add ncr* configuration.
5288 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5289 picayune ANSI compilers happy.
5291 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5293 * configure.in (i386): Make i386 and i486 synonymous for now.
5294 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5296 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5298 * Makefile.in (install): Fix typo.
5300 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5302 * Makefile.in (make): Remove obsolete crud.
5303 (sparc-opc.o): Avoid Sun Make VPATH bug.
5305 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5307 * Makefile.in: since there are no SUBDIRS, remove rule and
5308 references of subdir_do.
5310 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5312 * Makefile.in (install): Get the library name right here too.
5313 Don't install bfd.h, since it's unrelated to this library. No
5314 subdirs to recurse into, either.
5315 (CFILES): The source file has a .c suffix, not .o.
5317 * sparc-opc.c: New file, moved from BFD.
5318 * Makefile.in (OFILES): Build it.
5320 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5322 * z8k-dis.c: fixed forward refferences of some declarations.
5324 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5326 * Makefile.in: get the name of the library right
5328 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5330 * z8k-dis.c: knows how to disassemble z8k stuff
5331 * z8k-opc.h: new file full of z8000 opcodes
5335 version-control: never
projects / external / binutils.git / blob