1 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
3 * mips-dis.c (print_insn_mips16): Set insn_info information.
4 (print_mips16_insn_arg): Likewise.
6 * mips-dis.c (print_insn_mips16): Better handling of an extend
7 opcode followed by an instruction which can not be extended.
9 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
11 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
12 coldfire moveb instruction to not allow an address register as
13 destination. Although the documentation does not indicate that
14 this is invalid, experiments uncovered unexpected behavior.
15 Added a comment explaining the situation. Thanks to Andreas
16 Schwab for pointing this out to me.
19 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
21 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
22 entries are presorted so that entries with the same mnemonic are
23 adjacent to each other in the table. Sort the entries for each
24 instruction so that this is true.
27 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
29 * m68k-dis.c: Include <libiberty.h>.
30 (print_insn_m68k): Sort the opcode table on the most significant
34 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
36 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
37 "vsub", "vst", "xnor", and "xor" instructions.
38 (V_a1): Renamed from V_a, msb of accumulator reg number.
39 (V_a0): Add macro, lsb of accumulator reg number.
41 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
43 * tic80-dis.c (print_insn_tic80): Broke excessively long
44 function up into several smaller ones and arranged for
45 the instruction printing function to be callable recursively
46 to print vector instructions that have both a load and a
47 math instruction packed into a single opcode.
48 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
49 to explain why it comes after the other vector opcodes.
52 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
54 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
55 move insns to handle immediate operands.
57 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
59 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
60 fix operand mask in the "moveml" entries for the coldfire.
63 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
65 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
66 New macros for building vector instruction opcodes.
67 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
68 FMT_LI, which were unused. The field is now a flags field.
69 Remove some opcodes that are possible, but illegal, such
70 as long immediate instructions with doubles for immediate
71 values. Add "vadd" and "vld" instructions.
73 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
75 * tic80-opc.c (tic80_operands): Reorder some table entries to make
76 the order more logical. Move the shift alias instructions ("rotl",
77 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
78 interspersed with the regular sr.x and sl.x instructions. Add
79 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
80 "sub", "subu", "swcr", and "trap".
82 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
84 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
85 (OFF_SL_PC): Renamed from OFF_SL.
86 (OFF_SS_BR): New operand type for base relative operand.
87 (OFF_SL_BR): New operand type for base relative operand.
88 (REG_BASE): New operand type for base register operand.
89 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
90 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
91 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
93 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
94 10 char field, padded with spaces on rhs, rather than a string
95 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
96 than old TIC80_OPERAND_RELATIVE. Add support for new
97 TIC80_OPERAND_BASEREL flag bit.
99 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
101 * tic80-dis.c (print_insn_tic80): Print floating point operands
103 * tic80-opc.c (SPFI): Add single precision floating point
104 immediate operand type.
105 (ROTATE): Add rotate operand type for shifts.
106 (ENDMASK): Add for shifts.
107 (n): Macro for the 'n' bit.
108 (i): Macro for the 'i' bit.
109 (PD): Macro for the 'PD' field.
110 (P2): Macro for the 'P2' field.
111 (P1): Macro for the 'P1' field.
112 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
116 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
118 * mn10200-dis.c (disassemble): Mask off unwanted bits after
119 adding in current address for pc-relative operands.
122 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
124 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
125 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
126 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
127 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
128 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
129 REG_BASE_M_SI, REG_BASE_M_LI respectively.
130 (REG_SCALED, LSI_SCALED): New operand types.
131 (E): New macro for 'E' bit at bit 27.
132 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
133 opcodes, including the various size flavors (b,h,w,d) for
134 the direct load and store instructions.
136 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
138 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
140 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
141 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
142 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
143 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
144 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
145 masks with "MASK_* & ~M_*" to get the M bit reset.
146 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
148 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
150 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
151 correctly. Add support for printing TIC80_OPERAND_BITNUM and
152 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
154 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
155 CC, SICR, and LICR table entries.
156 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
157 "bcnd", and "brcr" opcodes.
160 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
162 * ppc-opc.c (powerpc_operands): Make comment match the
163 actual fields (no shift field).
164 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
166 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
167 partial implementation, work in progress.
168 * tic80-opc.c (tic80_operands): Begin construction operands table.
169 (tic80_opcodes): Continue populating opcodes table and start
170 filling in the operand indices.
171 (tic80_num_opcodes): Add this.
174 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
176 * m68k-opc.c: Add #B case for moveq.
178 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
180 * mn10300-dis.c (disassemble): Make sure all variables are initialized
181 before they are used.
184 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
186 * v850-opc.c (v850_opcodes): Put curly-braces around operands
187 for "breakpoint" instruction.
190 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
192 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
193 (dep): Use ALL_CFLAGS rather than CFLAGS.
196 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
198 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
202 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
204 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
206 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
209 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
211 * mips16-opc.c: Add "abs".
214 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
216 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
217 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
218 (disassembler): Add bfd_arch_tic80 support to set disassemble
220 * tic80-dis.c (print_insn_tic80): Add stub.
222 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
224 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
225 * configure: Regenerate with autoconf.
226 * tic80-dis.c: Add file.
227 * tic80-opc.c: Add file.
231 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
233 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
236 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
238 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
239 (mn10200_opcodes): Use it for some logicals and btst insns.
240 Add "break" and "trap" instructions.
242 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
244 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
246 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
248 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
249 relative load or add now depends upon whether the instruction is
252 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
254 * mn10200-dis.c: Finish writing disassembler.
255 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
256 Fix mask for "jmp (an)".
258 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
259 handle endianness issues for mn10300.
261 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
263 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
265 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
266 instruction. Fix opcode field for "movb (imm24),dn".
268 * mn10200-opc.c (mn10200_operands): Fix insertion position
271 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
273 * mn10200-opc.c: Create mn10200 opcode table.
274 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
275 but moving along nicely.
277 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
279 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
281 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
283 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
284 specifiers for fmovem* instructions.
286 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
288 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
290 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
292 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
295 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
297 * mn10300-opc.c: Add some comments explaining the various
300 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
302 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
304 * m68k-dis.c (print_insn_arg): Handle new < and > operand
307 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
308 operand specifiers in fmovm* instructions.
310 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
312 * ppc-opc.c (insert_li): Give an error if the offset has the two
313 least significant bits set.
315 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
317 * mips-dis.c (print_insn_mips16): Separate the instruction from
318 the arguments with a tab, not a space.
320 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
322 * mn10300-dis.c (disasemble): Finish conversion to '$' as
325 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
328 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
330 * configure: Rebuild with autoconf 2.12.
332 Add support for mips16 (16 bit MIPS implementation):
333 * mips16-opc.c: New file.
334 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
335 (mips16_reg_names): New static array.
336 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
337 after seeing a 16 bit symbol.
338 (print_insn_little_mips): Likewise.
339 (print_insn_mips16): New static function.
340 (print_mips16_insn_arg): New static function.
341 * mips-opc.c: Add jalx instruction.
342 * Makefile.in (mips16-opc.o): New target.
343 * configure.in: Use mips16-opc.o for bfd_mips_arch.
344 * configure: Rebuild.
346 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
348 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
349 operand specifiers in *save, *restore and movem* instructions.
351 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
354 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
355 register operands for immediate arithmetic, not, neg, negx, and
356 set according to condition instructions.
358 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
359 specifier of the effective-address operand in immediate forms of
360 arithmetic instructions. The specifier for the immediate operand
361 notes how and where the constant will be stored.
363 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
365 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
368 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
371 * mn10300-dis.c (disassemble): Prefix registers with '%'.
373 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
375 * mn10300-dis.c (disassemble): Handle register lists.
377 * mn10300-opc.c: Fix handling of register list operand for
378 "call", "ret", and "rets" instructions.
380 * mn10300-dis.c (disassemble): Print PC-relative and memory
381 addresses symbolically if possible.
382 * mn10300-opc.c: Distinguish between absolute memory addresses,
383 pc-relative offsets & random immediates.
385 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
387 (disassemble): Handle SPLIT and EXTENDED operands.
389 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
391 * mn10300-dis.c: Rough cut at printing some operands.
393 * mn10300-dis.c: Start working on disassembler support.
394 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
396 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
398 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
401 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
403 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
406 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
408 * mn10300-opc.c (mn10300_opcodes): Demand parens around
409 register argument is calls and jmp instructions.
411 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
413 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
414 getx operand. Fix opcode for mulqu imm,dn.
416 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
418 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
419 in MN10300_OPERAND_SPLIT operands for how many bits
420 appear in the basic insn word. Add IMM32_HIGH24,
421 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
422 (mn10300_opcodes): Use new operands as needed.
424 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
425 for bset, bclr, btst instructions.
426 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
428 * mn10300-opc.c (mn10300_operands): Remove many redundant
429 operands. Update opcode table as appropriate.
430 (IMM32): Add MN10300_OPERAND_SPLIT flag.
431 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
433 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
435 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
436 operands (for indexed load/stores). Fix bitpos for DI
437 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
438 few instructions that insert immediates/displacements in the
439 middle of the instruction. Add IMM8E for 8 bit immediate in
440 the extended part of an instruction.
441 (mn10300_operands): Use new opcodes as appropriate.
444 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
446 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
447 sequential so the assembler never parallelizes it with
451 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
453 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
454 a data/address register that appears in register field 0
455 and register field 1.
456 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
458 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
460 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
461 standard disassembly.
463 * alpha-opc.c (alpha_operands): Rearrange flags slot.
464 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
465 Recategorize PALcode instructions.
468 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
470 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
473 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
475 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
476 there are no operand types.
479 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
481 * v850-opc.c (D9_RELAX): Renamed from D9, all references
483 (v850_operands): Make sure D22 immediately follows D9_RELAX.
486 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
488 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
491 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
493 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
494 and sst.w instructions.
496 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
500 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
502 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
505 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
507 * ppc-opc.c (PPCPWR2): Define.
508 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
511 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
513 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
514 field for movhu instruction.
517 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
518 cast value to "long" not "signed long" to keep hpux10
522 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
524 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
527 * mn10300-opc.c (FMT*): Remove definitions.
529 * mn10300-opc.c (mn10300_opcodes): Fix destination register
530 for shift-by-register opcodes.
532 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
533 into [AD][MN][01] for encoding the position of the register
536 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
538 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
539 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
541 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
543 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
544 Fix various typos. Add "PAREN" operand.
546 (mn10300_opcodes): Surround all memory addresses with "PAREN"
547 operands. Fix several typos.
549 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
552 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
554 * mn10300-opc.c (FMT_XX): Renumber starting at one.
555 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
557 (mn10300_opcodes): Break opcode format out into its own field.
558 Update many operand fields to deal with signed vs unsigned
559 issues. Fix one or two typos in the "mov" instruction
560 opcode, mask and/or operand fields.
562 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
564 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
567 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
569 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
570 all opcodes. Very rough cut at operands for all opcodes.
572 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
575 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
577 * mn10200-opc.c, mn10300-opc.c: New files.
578 * mn10200-dis.c, mn10300-dis.c: New files.
579 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
580 * disassemble.c: Break mn10x00 support into 10200 and 10300
582 * configure.in: Likewise.
583 * configure: Rebuilt.
585 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
587 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
589 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
591 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
593 * disassemble (ARCH_mn10x00): Define.
594 (disassembler): Handle bfd_arch_mn10x00.
595 * configure.in: Recognize bfd_mn10x00_arch.
596 * configure: Rebuilt.
598 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
600 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
601 accordingly. Don't declare functions using op_rtn.
604 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
606 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
607 params to be more standard.
608 * (disassemble): Print absolute addresses and symbolic names for
609 branch and jump targets.
610 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
612 * (v850_opcodes): Add breakpoint insn.
615 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
617 * m68k-opc.c: Move the fmovemx data register cases before the
618 other cases, so that they get recognized before the data register
619 does gets treated as a degenerate register list.
621 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
623 * mips-opc.c: Add a case for "div" and "divu" with two registers
624 and a destination of $0.
626 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
628 * mips-dis.c (print_insn_arg): Add prototype.
629 (_print_insn_mips): Ditto.
631 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
633 * mips-dis.c (print_insn_arg): Print condition code registers as
636 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
638 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
641 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
643 * v850-dis.c (disassemble): Make static. Provide prototype.
645 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
647 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
650 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
652 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
653 ']' characters into the output stream.
654 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
655 Add "memop" field to all opcodes (for the disassembler).
656 Reorder opcodes so that "nop" comes before "mov" and "jr"
659 * v850-dis.c (print_insn_v850): Fix typo in last change.
661 * v850-dis.c (print_insn_v850): Properly handle disassembling
662 a two byte insn at the end of a memory region when the memory
663 region's size is only two byte aligned.
665 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
667 * v850-dis.c (v850_reg_names): Define.
668 (v850_sreg_names, v850_cc_names): Likewise.
669 (disassemble): Very rough cut at printing operands (unformatted).
671 * v850-opc.c (BOP_MASK): Fix.
672 (v850_opcodes): Fix mask for jarl and jr.
674 * v850-dis.c: New file. Skeleton for disassembler support.
675 * Makefile.in Remove v850 references, they're not needed here
676 and they weren't being sanitized away.
677 * configure.in: Add v850-dis.o when building v850 toolchains.
678 * configure: Rebuilt.
679 * disassemble.c (disassembler): Call v850 disassembler.
681 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
682 (insert_d8_6, extract_d8_6): New functions.
683 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
684 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
686 (IF4A, IF4B): Use "D7" instead of "D7S".
687 (IF4C, IF4D): Use "D8_7" instead of "D8".
688 (IF4E, IF4F): New. Use "D8_6".
689 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
690 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
692 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
693 (v850_operands): Change D16 to D16_15, use special insert/extract
694 routines. New new D16 that uses the generic insert/extract code.
695 (IF7A, IF7B): Use D16_15.
696 (IF7C, IF7D): New. Use D16.
697 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
699 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
700 message. Issue an error if the branch offset is odd.
702 * v850-opc.c: Add notes about needing special insert/extract
703 for all the load/store insns, except "ld.b" and "st.b".
705 * v850-opc.c (insert_d22, extract_d22): New functions.
706 (v850_operands): Use insert_d22 and extract_d22 for
708 (insert_d9): Fix range check.
710 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
712 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
713 and set bits field to D9 and D22 operands.
715 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
717 * v850-opc.c (v850_operands): Define SR2 operand.
718 (v850_opcodes): "ldsr" uses R1,SR2.
720 * v850-opc.c (v850_opcodes): Fix opcode specs for
721 sld.w, sst.b, sst.h, sst.w, and nop.
723 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
725 * v850-opc.c (v850_opcodes): Add null opcode to mark the
726 end of the opcode table.
730 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
732 * d10v-opc.c (pre_defined_registers): Added register pairs,
733 "r0-r1", "r2-r3", etc.
737 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
739 * v850-opc.c (v850_operands): Make I16 be a signed operand.
740 Create I16U for an unsigned 16bit mmediate operand.
741 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
743 * v850-opc.c (v850_operands): Define EP operand.
744 (IF4A, IF4B, IF4C, IF4D): Use EP.
746 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
747 with immediate operand, "movhi". Tweak "ldsr".
749 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
750 correct. Get sld.[bhw] and sst.[bhw] closer.
752 * v850-opc.c (v850_operands): "not" is a two byte insn
754 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
756 * v850-opc.c (v850_operands): D16 inserts at offset 16!
758 * v850-opc.c (two): Get order of words correct.
760 * v850-opc.c (v850_operands): I16 inserts at offset 16!
762 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
763 register source and destination operands.
764 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
766 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
767 same thinko in "trap" opcode.
769 * v850-opc.c (v850_opcodes): Add initializer for size field
772 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
773 Add D8 for 8-bit unsigned field in short load/store insns.
774 (IF4A, IF4D): These both need two registers.
775 (IF4C, IF4D): Define. Use 8-bit unsigned field.
776 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
777 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
778 for "ldsr" and "stsr".
779 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
782 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
783 short store word (sst.w).
785 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
787 * v850-opc.c (v850_operands): Added insert and extract fields,
788 pointers to functions that handle unusual operand encodings.
790 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
792 * v850-opc.c (v850_opcodes): Enable "trap".
794 * v850-opc.c (v850_opcodes): Fix order of displacement
795 and register for "set1", "clr1", "not1", and "tst1".
797 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
799 * v850-opc.c (v850_operands): Add "B3" support.
800 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
803 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
805 * v850-opc.c: Close unterminated comment.
807 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
809 * v850-opc.c (v850_operands): Add flags field.
810 (v850_opcodes): add move opcodes.
812 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
814 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
815 * configure: (bfd_v850v_arch) Add new case.
816 * configure.in: (bfd_v850_arch) Add new case.
817 * v850-opc.c: New file.
820 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
822 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
825 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
827 * d10v-opc.c: Add additional information to the opcode
828 table to help determinine which instructions can be done
832 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
834 * mpw-make.sed: Update editing of include pathnames to be
837 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
839 * arm-opc.h: Added "bx" instruction definition.
841 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
843 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
846 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
848 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
850 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
852 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
855 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
857 * makefile.vms: Update for alpha-opc changes.
859 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
861 * i386-dis.c (print_insn_i386): Actually return the correct value.
862 (ONE, OP_ONE): #ifdef out; not used.
865 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
867 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
868 Changed subi operand type to treat 0 as 16.
871 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
873 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
876 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
878 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
879 memory transfer instructions. Add new format string entries %h and %s.
880 * arm-dis.c: (print_insn_arm): Provide decoding of the new
884 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
886 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
887 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
890 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
892 * alpha-dis.c (print_insn_alpha_osf): Remove.
893 (print_insn_alpha_vms): Remove.
894 (print_insn_alpha): Make globally visible. Chose the register
895 names based on info->flavour.
896 * disassemble.c: Always return print_insn_alpha for the alpha.
899 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
901 * d10v-dis.c (dis_long): Handle unknown opcodes.
903 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
905 * d10v-opc.c: Changes to support signed and unsigned numbers.
906 All instructions with the same name that have long and short forms
907 now end in ".l" or ".s". Divs added.
908 * d10v-dis.c: Changes to support signed and unsigned numbers.
910 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
912 * d10v-dis.c: Change all functions to use info->print_address_func.
915 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
917 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
918 move ccr/sr insns more strict so that the disassembler only
919 selects them when the addressing mode is data register.
922 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
923 * d10v-opc.c (pre_defined_registers): Declare.
924 * d10v-dis.c (print_operand): Now uses pre_defined_registers
925 to pick a better name for the registers.
928 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
930 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
931 operands for fexpand and fpmerge. From Christian Kuehnke
932 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
934 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
936 * alpha-dis.c (print_insn_alpha): No longer the user-visible
937 print routine. Take new regnames and cpumask arguments.
938 Kill the environment variable nonsense.
939 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
940 (print_insn_alpha_vms): New function. Do VMS style regnames.
941 * disassemble.c (disassembler): Test bfd flavour to pick
942 between OSF and VMS routines. Default to OSF.
944 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
946 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
947 * configure: Rebuild.
948 * Makefile.in (install): Use @INSTALL_SHLIB@.
951 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
953 * configure: (bfd_d10v_arch) Add new case.
954 * configure.in: (bfd_d10v_arch) Add new case.
955 * d10v-dis.c: New file.
956 * d10v-opc.c: New file.
957 * disassemble.c (disassembler) Add entry for d10v.
960 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
962 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
963 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
965 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
967 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
968 distinguish between variants of the instruction set.
969 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
970 distinguish between variants of the instruction set.
972 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
974 * i386-dis.c (print_insn_i8086): New routine to disassemble using
975 the 8086 instruction set.
976 * i386-dis.c: General cleanups. Make most things static. Add
977 prototypes. Get rid of static variables aflags and dflags. Pass
978 them as args (to almost everything).
980 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
982 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
984 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
986 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
987 if the next arg is marked with SRC_IN_DST. Gross.
989 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
990 we're looking for and find EXR.
992 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
993 if we're looking for KBIT and we don't find it.
995 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
998 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
999 3bit immediate operands.
1001 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1003 * Released binutils 2.7.
1005 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1006 <kkaempf@progis.ac-net.de>.
1008 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1010 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1012 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1014 * sparc-dis.c (print_insn_sparclite): New routine to print
1015 sparclite instructions.
1017 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1019 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1021 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1023 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1024 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1025 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1027 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1029 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1030 Use autoconf-set values.
1031 (docdir, oldincludedir): Removed.
1032 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1034 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1036 * alpha-opc.c: New file.
1037 * alpha-opc.h: Remove.
1038 * alpha-dis.c: Complete rewrite to use new opcode table.
1039 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1040 * configure: Rebuild with autoconf 2.10.
1041 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1042 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1044 (alpha-opc.o): New target.
1046 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1048 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1049 Set imm_added_to_rs1 even if the source and destination register
1052 * sparc-opc.c: Add some two operand forms of the wr instruction.
1054 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1056 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1059 * disassemble.c (disassembler): Handle H8/S.
1060 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1062 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1064 * sparc-opc.c: Add beq/teq as aliases for be/te.
1066 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1067 <sergei@msil.sps.mot.com>.
1069 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1071 * makefile.vms: New file.
1073 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1075 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1077 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1080 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1082 * i386-dis.c (OP_OFF): Call append_prefix.
1084 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1086 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1087 unsigned long to silence a warning from the Solaris PowerPC
1090 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1092 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1094 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1096 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1098 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1099 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1100 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1101 cpush, cpusha, cpull sparclet insns.
1103 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1105 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1107 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1109 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1110 Set F_FLOAT on other floating point instructions.
1112 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1114 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1116 (powerpc_opcodes): Add 860/821 specific SPRs.
1118 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1120 * configure.in: Permit --enable-shared to specify a list of
1121 directories. Set and substitute BFD_PICLIST.
1122 * configure: Rebuild.
1123 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1124 uses. Set to @BFD_PICLIST@.
1126 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1128 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1129 not "abs", which may be needed for the absolute in something
1130 like btst #0,@10:8. Print L_3 immediates separately from other
1131 immediates. Change ABSMOV reference to ABS8MEM.
1133 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1135 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1136 (current_arch_mask): New static global.
1137 (compute_arch_mask): New static function.
1138 (print_insn_sparc): Delete sparc_v9_p. New static local
1139 current_mach. Resort opcode table if current_mach changes.
1140 Generalize "insn not supported" test.
1141 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1142 Delete test for v9/!v9.
1143 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1145 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1146 (brfcx): Renamed to FBRX.
1147 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1148 coprocessor mnemonics are not supported on the sparclet).
1149 (condf): Renamed to CONDF.
1150 (SLCBCC2): Delete F_ALIAS flag.
1152 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1154 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1155 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1157 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1159 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1160 that the shared library version number is set correctly.
1162 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1164 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1165 Miles Bader <miles@gnu.ai.mit.edu>.
1166 * configure: Rebuild.
1168 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1170 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1173 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1175 * configure: Rebuild with autoconf 2.8.
1177 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1179 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1180 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1182 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1184 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1185 since they appear as targets in Makefile.in.
1186 * configure: Rebuild.
1188 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1190 * mpw-make.sed: Edit out shared library support bits.
1192 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1194 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1195 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1196 (sparc_opcodes): Add sparclet insns.
1197 (sparclet_cpreg_table): New static local.
1198 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1199 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1201 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1203 * i386-dis.c (index16): New static variable.
1204 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1206 (OP_indirE): Return result of OP_E.
1207 (OP_E): Check for 16 bit addressing mode, and disassemble
1208 correctly. Optimised 32 bit case a little. Don't print
1209 "(base,index,scale)" when sib specifies only an offset.
1211 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1213 * configure.in: Set and substitute SHLIB_DEP.
1214 * configure: Rebuild.
1215 * Makefile.in (SHLIB_DEP): New variable.
1216 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1217 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1218 COMMON_SHLIB, add them to piclist with appropriate modifications.
1219 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1220 here: just use piclist.
1222 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1224 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1225 (print_insn_sparc): Rewrite v9/not-v9 tests.
1226 (compare_opcodes): Likewise.
1227 * sparc-opc.c (MASK_<ARCH>): Define.
1228 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1229 (sparclet,v6notv9): Define.
1230 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1231 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1233 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1235 * configure.in: Call AC_PROG_CC before configure.host.
1236 * configure: Rebuild.
1238 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1240 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1242 * i386-dis.c (onebyte_has_modrm): New static array.
1243 (twobyte_has_modrm): New static array.
1244 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1246 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1248 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1251 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1253 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1256 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1258 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1259 m68010up, not just m68020up | cpu32.
1261 * Makefile.in (SONAME): New variable.
1262 ($(SHLINK)): Make a link to the transformed name, as well.
1263 (stamp-tshlink): New target.
1264 (install): Skip stamp-tshlink during install.
1266 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1268 * configure.in: Call AC_ARG_PROGRAM.
1269 * configure: Rebuild.
1270 * Makefile.in (program_transform_name): New variable.
1271 (install): Transform library name before installing it.
1273 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1275 * i960-dis.c (mem): Add HX dcinva instruction.
1277 Support for building as a shared library, based on patches from
1278 Alan Modra <alan@spri.levels.unisa.edu.au>:
1279 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1280 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1281 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1282 * configure: Rebuild.
1283 * Makefile.in (ALLLIBS): New variable.
1284 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1285 (COMMON_SHLIB, SHLINK): New variables.
1286 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1287 (STAGESTUFF): Remove variable.
1288 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1289 (stamp-piclist, piclist): New targets.
1290 ($(SHLIB), $(SHLINK)): New targets.
1291 ($(OFILES)): Depend upon stamp-picdir.
1292 (disassemble.o): Build twice if PICFLAG is set.
1293 (MOSTLYCLEAN): Add pic/*.o.
1294 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1295 (distclean): Remove pic and stamp-picdir.
1296 (install): Install shared libraries.
1297 (stamp-picdir): New target.
1299 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1301 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1302 Print unknown instruction as "unknown", rather than in hex.
1304 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1306 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1308 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1310 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1312 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1314 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1315 when necessary. From Ulrich Drepper
1316 <drepper@myware.rz.uni-karlsruhe.de>.
1318 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1320 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1321 sparc_num_opcodes. Update architecture enum values.
1322 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1323 (sparc_opcode_lookup_arch): New function.
1324 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1325 (sparc_opcodes): Add v9a shutdown insn.
1327 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1329 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1330 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1332 (print_insn_sparc64): Deleted.
1333 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1336 * sparc-opc.c (architecture_pname): Add v9a.
1338 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1340 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1341 incorrectly defined as 0x16 when it should be 0x15.
1342 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1343 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1344 excb (exception barrier) which is defined in the Alpha
1345 Architecture Handbook version 2.
1346 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1347 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1348 disassembled as or, for example.
1350 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1352 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1353 (_print_insn_mips): Change i from int to unsigned int.
1355 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1357 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1358 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1360 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1362 * i386-dis.c: Added Pentium Pro instructions.
1364 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1366 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1369 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1371 * sh-opc.h (sh_nibble_type): Added REG_B.
1372 (sh_arg_type): Added A_REG_B.
1373 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1375 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1377 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1379 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1381 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1383 * Makefile.in (distclean): Remove stamp-h. From Ronald
1384 F. Guilmette <rfg@monkeys.com>.
1386 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1388 From David Mosberger-Tang <davidm@azstarnet.com>:
1389 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1392 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1394 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1395 (sh_table): Added many SH3 opcodes.
1396 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1398 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1400 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1401 (subco,subco.): Mark this PPC, not PPCCOM.
1403 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1405 * configure: Rebuild with autoconf 2.7.
1407 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1409 * configure: Rebuild with autoconf 2.6.
1411 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1413 * configure.in: Sort list of architectures. Accept but do nothing
1414 for alliant, convex, pyramid, romp, and tahoe.
1416 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1418 * a29k-dis.c (print_special): Change num to unsigned int.
1420 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1422 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1425 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1427 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1428 * configure: Rebuilt.
1430 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1432 * configure.in: Add case for bfd_i860_arch.
1433 * configure: Rebuild.
1435 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1437 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1438 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1439 (NEXTDOUBLE): Likewise.
1440 (print_insn_m68k): Don't match fmoveml if there is more than one
1441 register in the list.
1442 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1444 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1446 * m68k-opc.c: Use #W rather than #w.
1447 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1449 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1451 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1452 and likewise for all the dbxx opcodes.
1454 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1456 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1458 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1460 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1461 the VR4100 specific instructions to the mips_opcodes structure.
1463 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1465 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1466 ugly Metrowerks bug in CW6, is fixed in CW7.
1468 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1470 * ppc-opc.c (whole file): Add flags for common/any support.
1472 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1474 * Makefile.in (BISON): Remove macro.
1475 (FLAGS_TO_PASS): Remove BISON.
1477 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1479 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1481 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1482 instructions that take no args by looking at the match mask.
1483 (print_insn_arg): Always print "%" before register names.
1484 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1485 [case '_']: Don't print "@#" before address.
1486 [case 'J']: Use "%s" as format string, not register name.
1487 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1489 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1491 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1494 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1496 From David Mosberger-Tang <davidm@azstarnet.com>
1498 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1499 (alpha_insn_set): added definitions for VAX floating point
1500 instructions (Unix compilers don't generate these, but handcoded
1501 assembly might still use them).
1503 * alpha-dis.c (print_insn_alpha): added support for disassembling
1504 the miscellaneous instructions in the Alpha instruction set.
1506 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1508 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1509 no longer create sysdep.h, sed ppc-opc.c to work around a
1510 serious Metrowerks C bug.
1511 * mpw-make.in: Remove.
1512 * mpw-make.sed: New file, used by mpw-configure to edit
1513 Makefile.in into an MPW makefile.
1515 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1517 * Makefile.in (maintainer-clean): New synonym for realclean.
1519 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1521 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1522 which use '0', '1', and '2' instead. Specify the proper size for
1523 a pmove immediate operand. Correct the pmovefd patterns to be
1524 moves to a register, not from a register.
1525 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1527 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1529 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1530 %psr, %wim, %tbr as F_NOTV9.
1532 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1534 * Makefile.in (Makefile): Just rebuild Makefile when running
1536 (config.h, stamp-h): New targets.
1537 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1538 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1539 rebuilding config.h.
1540 * configure: Rebuild.
1542 * mips-opc.c: Change unaligned loads and stores with "t,A"
1543 operands to use "t,A(b)".
1545 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1547 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1549 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1551 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1552 until 3 instead of until 2.
1554 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1556 * Makefile.in (ALL_CFLAGS): Define.
1557 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1558 (MOSTLYCLEAN): Add config.log.
1559 (distclean): Don't remove config.log.
1560 * configure.in: Substitute HDEFINES.
1561 * configure: Rebuild.
1563 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1565 * sh-opc.h (sh_arg_type): Add F_FR0.
1566 (sh_table, case fmac): Add F_FR0 as first argument.
1568 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1570 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1572 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1574 * sparc-dis.c: Remove all references to NO_V9.
1576 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1578 * aclocal.m4: Just include ../bfd/aclocal.m4.
1579 * configure: Rebuild.
1581 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1583 * sparc-dis.c (X_DISP19): Define.
1584 (print_insn, case 'G'): Use it.
1585 (print_insn, case 'L'): Sign extend displacement.
1587 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1589 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1590 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1591 host_makefile_frag or frags.
1592 * aclocal.m4: New file.
1593 * configure: Rebuild.
1594 * Makefile.in (INSTALL): Set to @INSTALL@.
1595 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1596 (INSTALL_DATA): Set to @INSTALL_DATA@.
1598 (AR_FLAGS): Set to rc rather than qc.
1599 (CC): Define as @CC@.
1600 (CFLAGS): Set to @CFLAGS@.
1601 (@host_makefile_frag@): Remove.
1602 (config.status): Remove dependency upon @frags@.
1604 * configure.in: ../bfd/config.bfd now just sets shell variables.
1605 Use them rather than looking through target Makefile fragments.
1606 * configure: Rebuild.
1608 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1610 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1612 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1614 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1615 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1618 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1619 (lookup_{name,value}): New functions.
1620 (prefetch_table): New static local.
1621 (sparc_{encode,decode}_prefetch): New functions.
1622 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1624 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1626 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1629 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1631 * sh-dis.c: Correct comment on first line of file.
1633 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1635 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1637 * sparc-opc.c (asi, membar): New static locals.
1638 (sparc_{encode,decode}_{asi,membar}): New functions.
1639 (sparc_opcodes, membar insn): Fix.
1640 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1641 Support decoding of membar masks.
1644 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1646 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1648 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1650 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1651 and likewise for the other branches. Add bhs as an alias for bcc,
1652 and likewise for the size variants. Add dbhs as an alias for
1655 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1657 * sh-opc.h (FP sts instructions): Update to match reality.
1659 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1661 * m68k-dis.c: (fpcr_names): Add % before all register names.
1662 (reg_names): Likewise.
1663 (print_insn_arg): Don't explicitly print % before register names.
1664 Add % before register names in static array names. In case 'r',
1665 print data registers as `@(Dn)', not `Dn@'. When printing a
1666 memory address, don't print @# before it.
1667 (print_indexed): Change base_disp and outer_disp from int to
1668 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1669 syntax. Sign extend 8 byte displacement correctly.
1670 (print_base): Print using MIT syntax. Print zpc when appropriate.
1671 Change parameter disp from int to bfd_vma.
1673 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1676 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1678 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1679 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1680 * sh-opc.h (sh_arg_type): Add new operand types.
1681 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1683 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1685 * Makefile.in (distclean): Remove generated file config.h.
1687 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1689 * Makefile.in (distclean): Remove generated file config.h.
1691 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1693 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1695 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1697 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1698 rather than numopcodes. Use m68k_opcodes rather than removed
1699 opcode function. Don't check F_ALIAS.
1700 (print_insn_arg): Change first parameter to be const char *.
1701 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1702 (m68k-opc.o): New target.
1703 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1704 * configure: Rebuild.
1706 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1708 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1709 (opcode_bits, opcode_hash_table): New variables.
1710 (opcodes_initialized): Renamed from opcodes_sorted.
1711 (build_hash_table): New function.
1712 (is_delayed_branch): Use hash table.
1713 (print_insn): Renamed from print_insn_sparc, made static.
1714 Build and use hash table. If !sparc64, ignore sparc64 insns,
1715 and vice-versa if sparc64.
1716 (print_insn_sparc, print_insn_sparc64): New functions.
1717 (compare_opcodes): Move sparc64 opcodes to end.
1718 Print commutative insns with constant second.
1719 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1721 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1723 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1724 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1725 avoids printing a delay slot in a delay slot.
1726 * sh-opc.h (sh_table): Fully bracket last entry.
1728 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1730 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1732 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1734 * configure.in: Get host_makefile_frag from ${srcdir}.
1736 * configure.in: Autoconfiscated. Check for string[s].h. Create
1737 config.h from config.in. Don't set up sysdep.h link.
1738 * sysdep.h: New file.
1739 * configure, config.in: New files, generated from configure.in.
1740 * Makefile.in: Updated to be processed autoconf-style.
1741 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1742 (Makefile): Depend on config.status.
1743 (config.status): New rule.
1744 * configure.bat: Update Makefile substitutions.
1746 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1748 * mips-opc.c (L1): Define.
1749 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1750 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1753 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1755 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1756 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1757 have multiple add units but only a single logical unit.
1759 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1760 shifted by 18, without any insertion or extraction function.
1761 (insert_cr, extract_cr): Remove.
1764 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1766 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1769 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1771 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1774 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1776 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1777 * sh-opc.h: Add copyright.
1779 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1781 * Makefile.in (crunch-m68k): Delete extra target accidentally
1782 checked in a while ago.
1784 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1786 * sh-opc.h (sh_table): Add SH3 support.
1788 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1790 * sh-opc.h: Added bsrf and braf.
1792 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1794 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1795 bogus [ls]fm{ea,fd} patterns.
1797 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1798 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1799 initialize it from memory. Make function static.
1800 (print_insn_{big,little}_arm): New functions.
1801 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1802 the correct endianness.
1805 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1807 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1808 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1811 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1813 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1816 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1818 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1819 17th, so that it builds again using GCC as the compiler.
1821 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1823 * mips-dis.c (print_insn_little_mips): Cast return value from
1824 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1825 expects an unsigned long, and that might be fewer words of
1826 argument storage (e.g., if bfd_vma is long long on a 32-bit
1828 (print_insn_big_mips): Likewise with bfd_getb32 value.
1829 (_print_insn_mips): Now static.
1831 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1833 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1834 gcc memory hog problem with initializer is fixed.
1837 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1839 * arc-opc.c (NULL): Define.
1840 (arc_operands, insn fields u,s): Delete.
1841 (arc_operands, insn fields a,b,c): Mark as signed.
1842 (arc_opcodes): No longer const, links computed at run-time.
1843 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1844 suffixes that affect the insn code.
1845 (arc_opcodes): Resort table to macros are first.
1846 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1847 (arc_opcodes, st [b] entry): Likewise.
1848 (arc_opcodes, st [b,d] entry): Fix mask, value.
1849 (arc_reg_names): Add entries for r29, r30, r31, r60.
1850 (opcode_map, icode_map): New static globals.
1851 (arc_opcode_init_tables): Initialize them.
1852 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1853 (insert_shimmoffset): Signal error if register present.
1855 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1858 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1860 Merge in support for Mac MPW as a host.
1861 (Old change descriptions retained for informational value.)
1863 * mpw-config.in (archname): Compute from the config.
1864 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1866 * mpw-config.in (target_arch): Compute from canonical target.
1867 (m68k, mips, powerpc, sparc): Add architectures.
1868 * mpw-make.in (disassemble.c.o): Add.
1869 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1871 * mpw-config.in (BFD_MACHINES): Set to a default value.
1872 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1874 * mpw-make.in (CSEARCH): Add extra-include to search path.
1876 * mpw-config.in (varargs.h): Don't create.
1877 (sysdep.h): Create using forward-include.
1878 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1880 * mpw-config.in: New file, MPW version of configure.in.
1881 * mpw-make.in: New file, MPW version of Makefile.in.
1884 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1886 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1887 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1888 (print_insn_*): Pass bfd mach number, not opcode version.
1889 * arc-opc.c (arc_get_opcode_mach): New function.
1892 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1894 * alpha-dis.c (print_insn_alpha): Put empty statement after
1897 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1899 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1900 (low_sign_extend): Likewise.
1901 (get_field): Delete unused function.
1902 (set_field, deposit_14, deposit_21): Likewise.
1904 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1906 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1909 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1911 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1913 * alpha-opc.h (OSF_ASMCODE): define
1914 print pal-code names as defined in App C of the
1915 Alpha Architecture Reference Manual
1917 * alpha-dis.c: cleaned up output
1918 print stylized code forms as defined in App A.4.3 of the
1919 Alpha Architecture Reference Manual
1921 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1923 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1925 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1928 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1930 * m68k-dis.c (opcode): New function. Returns address of opcode
1931 table entry given index, even if the opcode table was split to
1932 work around gcc bugs.
1933 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1935 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1936 (reg_names): Now const.
1937 (print_insn_arg): Arrays cacheFieldName and names now const.
1938 (print_indexed): Array scales now const.
1941 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1943 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1944 (print_insn_arc_{host,graphics,audio}): Likewise.
1945 (print_insn): Add prototype.
1946 (arc_get_disassembler): New arg `big_p'. Return little or big
1947 print fn accordingly.
1948 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1949 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1950 (arc_opval_supported): Likewise.
1951 * disassemble.c (disassembler): Pass big endian flag to
1952 arc_get_disassembler.
1955 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1957 * ppc-opc.c: Sort recently added instructions by minor opcode
1958 number within major opcode number.
1960 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1962 * hppa-dis.c: Include libhppa.h.
1964 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1966 * mips-opc.c: Change dli to use M_DLI, and add dla.
1968 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1970 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1973 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1975 * arc-dis.c (arc_get_disassembler): Change argument to int,
1976 one of bfd_mach_arc_xxx. All callers updated.
1979 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1981 * mips-opc.c: Add r4650 mul instruction.
1983 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1985 * mips-opc.c: Add uld and usd macros for unaligned double load and
1988 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1990 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1991 mfdcr, mtdcr, icbt, iccci.
1994 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1996 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1997 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1998 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1999 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2000 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2001 (insert_absaddr): New function.
2003 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2005 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2006 New argument `cpu', pass it to arc_opcode_init_tables.
2007 Document byte order dependencies. Ignore unsupported insns.
2008 (arc_get_disassembler): New function.
2009 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2010 print_insn_arc_audio): New functions.
2011 * arc-opc.c (MULTSHIFT operand): Delete.
2012 (UNSIGNED, SATURATION): New operands.
2013 (mac, mul, mul64, mulu64): New insns.
2014 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2015 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2016 (host,graphics,audio extended and auxiliary regs): Define.
2017 (ss, sc, mh, ml): New suffixes.
2018 (arc_opcode_supported, arc_opval_supported): New functions.
2019 (insert_multshift, extract_multshift): Deleted.
2020 * disassemble.c (disassembler, case bfd_arch_arc): Call
2021 arc_get_disassembler to get disassembler routine.
2024 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2026 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2027 signed char fields to shorts, more portable.
2029 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2031 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2032 char fields as signed chars, since they may have negative values.
2034 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2036 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2037 (mycroft@netbsd.org).
2039 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2041 From "Logg, Ed" <elogg@ea.com>:
2042 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2043 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2046 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2048 * ppc-opc.c: Changes based on patch from David Edelsohn
2049 <edelsohn@mhpcc.edu>.
2050 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2053 (insert_tbr): New static function.
2054 (extract_tbr): New static function.
2055 (XFXFXM_MASK, XFXM): Define.
2056 (XSPRBAT_MASK, XSPRG_MASK): Define.
2057 (powerpc_opcodes): Add instructions to access special registers by
2058 name. Add mtcr and mftbu.
2060 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2062 * mips-opc.c (P3): Define.
2063 (mips_opcodes): Add mad and madu.
2065 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2067 * configure.in: Add W65 support.
2068 * disassemble.c: Likewise.
2069 * w65-opc.h, w65-dis.c: New files.
2071 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2073 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2077 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2079 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2081 * arc-opc.c (extract_reladdr): New function.
2082 (insert_reladdr): Store address right-shifted by 2.
2085 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2087 * mips-opc.c: Add dli as a synonym for li.
2090 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2092 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2094 (extraction fns): Insn argument now array of two words. Return pointer
2095 to value's table entry. All uses changed.
2096 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2097 (insert_multshift, extract_multshift): New fns.
2098 (arc_operands): Add support for cache bypass suffix. Add support for
2099 predefined aux regs. Modifier bits moved to flags field.
2100 (arc_opcodes): Likewise.
2101 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2102 New insn rlc. Update to syntax in programmer's manual.
2103 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2104 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2106 (arc_opcode_init_tables): New argument to indicate cpu type.
2107 (insert_reg): Handle predefined aux regs.
2108 (extract_reg): Likewise.
2109 (lookup_register): New fn.
2110 * arc-dis.c (arc_condition_codes): Deleted.
2111 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2112 Clean up modifier handling. Handle predefined aux regs.
2115 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2117 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2118 print something for reserved opcode values, even if it won't
2121 * mips-dis.c (_print_insn_mips): When initializing, shift right
2122 and mask, to avoid sign extension problems on the Alpha.
2124 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2128 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2130 * configure.in: Add ARC support.
2131 * disassemble.c: Likewise.
2132 * arc-dis.c, arc-opc.c: New files.
2135 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2137 * sh-opc.h (mov.l gbr): Get direction right.
2138 * sh-dis.c (print_insn_shx): New function.
2139 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2140 print opcodes with right byte order.
2142 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2144 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2145 to avoid conflicts with getopt.
2147 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2149 * hppa-dis.c (print_insn_hppa): Read the instruction using
2150 bfd_getb32, so that it works on a little endian or 64 bit host.
2151 Remove unused local variable op.
2153 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2155 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2156 addu does not work correctly if -mips3.
2158 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2160 * a29k-dis.c (print_special): Add special register names defined
2161 on 29030, 29040 and 29050.
2162 (print_insn): Handle new operand type 'I'.
2164 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2166 * Makefile.in (INSTALL): Use top level install.sh script.
2168 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2170 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2171 that it works on a little endian host.
2173 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2175 * configure.in: Use ${config_shell} when running config.bfd.
2177 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2179 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2181 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2183 * a29k-dis.c (print_insn): Print the opcode.
2185 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2187 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2189 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2191 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2193 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2195 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2196 which store a value into memory.
2198 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2200 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2201 * arm-dis.c, arm-opc.h: New files.
2203 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2205 * Makefile.in (ns32k-dis.o): Add dependency.
2206 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2207 string, not as array of chars.
2209 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2211 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2213 * sparc-opc.c: Added sparclite extended FP operations, and
2214 versions of v9 impdep* instructions permitting specification of
2217 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2219 * i960-dis.c (reg_names): Now const.
2220 (struct sparse_tabent): New type, copied from array type in mem
2222 (ctrl): Local static array ctrl_tab now const.
2223 (cobr): Local static array cobr_tab now const.
2224 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2225 static variable mem_tab no longer explicitly initialized. Changed
2226 mem_init to const array of struct sparse_tabent.
2227 (reg): Local static variable reg_tab no longer explicitly
2228 initialized. Changed reg_init to const array of struct
2230 (ea): Local static array scale_tab now const.
2232 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2235 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2237 * configure.bat: the disassember needs to be enabled for
2238 "objdump -d" to work in djgpp.
2240 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2242 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2243 (invalid_float): Enabled general version, doesn't require running
2244 on ns32k host. Changed to take char* argument, and test for
2245 explicitly specified sizes, instead of using sizeof() on host CPU
2247 (INVALID_FLOAT): Cast first argument.
2248 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2249 list_P032, list_M032): Now const.
2250 (optlist, list_search): Made appropriate arguments now point to
2252 (print_insn_arg): Changed static array of one-character-string
2253 pointers into a static const array of characters; fixed sprintf
2254 statement accordingly.
2256 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2258 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2259 from distribution. A ns32k-dis.c from a previous distribution has
2260 been brought up to date and supports the new interface.
2262 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2264 * configure.in: add bfd_ns32k_arch target support.
2266 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2267 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2269 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2271 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2274 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2276 * h8300-dis.c, mips-dis.c: Don't use true and false.
2278 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2280 * configure.in: Change --with-targets to --enable-targets.
2282 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2284 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2285 opcodes to the first instruction with that opcode, to speed
2286 disassembly of large files. From ralphc@pyramid.com (Ralph
2289 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2291 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2293 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2295 * configure.bat: update to latest makefile.in
2297 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2299 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2300 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2301 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2302 slot insn is in a delay slot.
2303 * z8k-opc.h: (resflg): Fix patterns.
2304 * h8500-opc.h Fix CR insn patterns.
2306 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2308 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2309 "cmpl" before POWER versions, so that gas -many uses them.
2311 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2313 * disassemble.c: New file.
2314 * Makefile.in (OFILES): Add disassemble.o.
2315 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2316 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2317 binutils/configure.in.
2319 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2320 opcode being examined.
2322 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2324 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2325 (insert_ral, insert_ram, insert_ras): New functions.
2326 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2327 RAS for store with update.
2329 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2331 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2332 (edelsohn@npac.syr.edu).
2334 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2336 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2339 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2341 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2343 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2345 * ppc-opc.c (powerpc_operands): The signedp field has been
2346 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2347 instead. Add new operand SISIGNOPT.
2348 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2349 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2350 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2353 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2355 * i386-dis.c (struct private): Renamed to dis_private. `private'
2356 is a reserved word for dynix cc.
2358 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2360 * configure.in: Change error message to refer to bfd/config.bfd
2361 rather than bfd/configure.in.
2363 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2365 * ppc-opc.c: Define POWER2 as short alias flag.
2366 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2369 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2371 * i960-dis.c (print_insn_i960): Don't read a second word for
2372 opcodes 0, 1, 2 and 3.
2374 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2376 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2378 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2380 * m68881-ext.c: Removed; no longer used.
2381 * Makefile.in: Changed accordingly.
2383 * m68k-dis.c (ext_format_68881): Don't declare.
2384 (print_insn_m68k): If an instruction uses place 'i', it uses at
2385 least four fixed bytes.
2386 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2387 extended float, convert to double using floatformat_to_double, not
2388 ieee_extended_to_double, and fetch the data before converting it.
2390 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2392 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2393 davidj@ICSI.Berkeley.EDU (David Johnson).
2395 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2397 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2398 PowerPC uses bdnz[l][a].
2400 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2402 * dis-buf.c, i386-dis.c: Include sysdep.h.
2404 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2406 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2408 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2409 by Motorola PowerPC 601 with PPC_OPCODE_601.
2410 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2411 Disassemble Motorola PowerPC 601 instructions as well as normal
2412 PowerPC instructions.
2414 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2416 * i960-dis.c (reg, mem): Just use a static array instead of
2419 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2421 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2422 condition name index if this is for a negated condition.
2424 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2425 Floating point format for 'H' operand is backwards from normal
2426 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2427 operands (fmpyadd and fmpysub), handle bizarre register
2428 translation correctly for single precision format.
2430 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2431 or 'I' operands if the next format specifier is 'M' (fcmp
2432 condition completer).
2434 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2436 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2437 single number giving a bitmask for the MB and ME fields of an M
2438 form instruction. Change NB to accept 32, and turn it into 0;
2439 also turn 0 into 32 when disassembling. Seperated SH from NB.
2440 (insert_mbe, extract_mbe): New functions.
2441 (insert_nb, extract_nb): New functions.
2442 (SC_MASK): Mask out SA and LK bits.
2443 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2444 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2445 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2446 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2447 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2448 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2449 (powerpc_macros): Define table of macro definitions.
2450 (powerpc_num_macros): Define.
2452 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2453 if PPC_OPERAND_NEXT is set.
2455 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2457 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2458 char. Retrieve contents using bfd_getl32 instead of shifting.
2460 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2462 * ppc-opc.c: New file. Opcode table for PowerPC, including
2463 opcodes for POWER (RS/6000).
2464 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2465 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2466 (CFILES): Add ppc-dis.c.
2467 (ppc-dis.o, ppc-opc.o): New targets.
2468 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2470 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2472 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2473 No space before 'u', 'f', or 'N'.
2475 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2477 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2478 farther than we should.
2480 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2482 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2484 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2486 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2488 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2489 needs it, to prevent reading past the end of a section.
2491 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2493 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2494 Removed t,A case for la; always use t,A(b) case.
2496 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2498 From Ted Lemen <mellon@pepper.ncd.com>
2499 * mips-dis.c (print_insn_arg): Handle 'k'.
2500 * mips-opc.c: Make cache use k, not t.
2502 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2504 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2505 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2506 FLOAT_FORMAT_CODE to put out floating point register names.
2508 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2510 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2512 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2514 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2516 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2518 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2519 larger than 32. Moved dsxx32 variants first for disassembler.
2521 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2523 * z8kgen.c, z8k-opc.h: Add full lda information.
2525 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2527 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2528 movb instructions. Any necessary space will be emitted by
2529 the code to handle nullification completers.
2531 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2533 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2535 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2537 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2538 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2540 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2542 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2544 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2546 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2547 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2549 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2551 * m88k-dis.c (m88kdis): comment change. Remove space after
2553 (printop): handle new arg types DEC and XREG for m88110.
2555 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2557 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2558 type for absolute branch addresses. Delete special
2559 "ble" and "be" code in 'W' operand code.
2561 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2563 * mips-opc.c: Set hazard information correctly for branch
2564 likely instructions.
2566 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2568 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2569 info->fprintf_func for printing and info->print_address_func for
2572 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2574 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2576 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2578 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2579 Corrected second case of "b" for disassembler.
2581 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2583 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2584 to BFD swapping routines to correspond to BFD name changes.
2586 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2588 * mips-opc.c: Change div machine instruction to be z,s,t rather
2589 than s,t. Change div macro to be d,v,t rather than d,s,t.
2590 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2591 rem and remu which generates only the corresponding div
2592 instruction. This is for compatibility with the MIPS assembler,
2593 which only generates the simple machine instruction when an
2594 explicit destination of $0 is used.
2595 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2597 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2599 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2600 WR_31 hazard for bal, bgezal, bltzal.
2602 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2604 * hppa-dis.c (print_insn_hppa): Use print function
2605 from within the disassemble_info, not fprintf_filtered.
2607 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2609 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2610 Law, law@cs.utah.edu.)
2612 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2614 * mips-opc.c ("absu"): Removed.
2617 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2619 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2620 Changed hazard information to distinguish between memory load
2621 delays and coprocessor load delays.
2623 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2625 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2627 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2629 * configure.in: Don't pass cpu to config.bfd.
2631 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2633 * m88k-dis.c (m88kdis): Make class unsigned.
2635 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2637 * alpha-dis.c (print_insn_alpha): One branch format case was
2638 missing the instruction name.
2640 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2642 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2643 Add the arch-specific auxiliary files.
2644 (OFILES): Remove the arch-specific auxiliary files
2645 and use BFD_MACHINES instead of DIS_LIBS.
2646 * configure.in: Set BFD_MACHINES based on --with-targets option.
2648 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2650 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2653 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2655 * sparc-opc.c: Change CONST to const to deal with gcc
2656 -Dconst=__const -traditional.
2658 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2660 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2661 coprocessor instructions out of #if 0, and made them use new
2664 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2666 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2668 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2670 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2671 instruction, for use by the disassembler.
2673 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2674 hand-coded sign extensions that depended on 32-bit host ints.
2675 FIXME, we still depend on big-endian host bitfield ordering.
2676 (sparc_print_insn): Set the insn_info_valid field, and the
2677 other fields that describe the instruction being printed.
2679 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2681 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2682 `jmp' instead of just one of them.
2684 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2686 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2687 (fput_fp_reg_r): Renamed from fput_reg_r.
2688 (fput_fp_reg): New function.
2689 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2691 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2693 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2695 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2697 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2699 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2700 don't output a space.
2702 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2704 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2706 * mips-opc.c: New file, containing opcode table from
2707 ../include/opcode/mips.h.
2708 * Makefile.in: Add it.
2710 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2712 * m88k-dis.c: New file, moved in from gdb and changed to use the
2713 new dis-asm.h disassembler interface.
2714 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2715 (m88k-dis.o): New target.
2717 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2719 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2720 argument string const char * to correspond to opcode/mips.h.
2722 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2724 * mips-dis.c: Updated to account for name changes in new version
2726 * Makefile.in: Added header file dependencies.
2728 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2730 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2732 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2734 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2735 extend, rather than shifts.
2737 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2739 * Makefile.in: Undo 15 June change.
2741 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2743 * m68k-dis.c (print_insn_arg): Change return value to byte count
2745 * m68k-dis.c: Re-write to detect invalid operands before
2746 printing anything, so we can handle this the same way we
2747 handle invalid opcodes.
2749 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2751 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2753 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2755 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2758 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2760 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2762 * configure.in: Do make sysdep.h link.
2763 * Makefile.in: Search ../include. Don't search ../bfd.
2765 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2767 Changes from Jeff Law, law@cs.utah.edu:
2768 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2769 Do not print a space before the completers specified by
2772 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2774 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2775 defined, since gdb has been fixed.
2777 Changes from Jeff Law, law@cs.utah.edu:
2778 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2779 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2780 be a *disassemble_info, not a *FILE.
2781 * hppa-dis.c: Support 'd', '!', and 'a'.
2782 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2783 * hppa-dis.c: Delete cases which are no longer needed.
2785 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2787 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2789 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2791 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2794 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2796 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2797 * configure.in: No longer need to configure to get sysdep.h.
2799 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2801 * Patches from Jeffrey Law <law@cs.utah.edu>.
2802 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2803 templates for 1.1 FP computational instructions.
2805 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2807 * h8500-dis.c (print_insn_h8500): Address argument is type
2809 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2812 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2813 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2815 * sparc-dis.c (compare_opcodes): Move static declaration to
2818 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2820 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2821 instruction, remove unimp hack from 'l' argument.
2823 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2825 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2828 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2830 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2831 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2834 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2836 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2837 arrays of string pointers to 2-d arrays of chars, to save
2840 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2842 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2843 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2845 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2847 * hppa-dis.c: New file from Utah, adapted to new disassembler
2849 * Makefile.in: Include it.
2851 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2853 * sh-dis.c, sh-opc.h: New files.
2855 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2857 * alpha-dis.c, alpha-opc.h: New files.
2859 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2861 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2864 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2866 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2868 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2870 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2873 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2875 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2876 and double percent signs a few places.
2878 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2880 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2881 Use info->print_address_func not print_address.
2883 * dis-buf.c (generic_print_address): New function.
2885 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2887 * Makefile.in: Add sparc-dis.c.
2888 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2890 Add `add' instruction to the set that get checked
2891 for a preceding `sethi' in order to print an absolute address.
2892 * (print_insn): Disassembly prefers real instructions.
2893 (is_delayed_branch): Speed up.
2894 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2895 Still missing some float ops, and needs testing.
2896 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2897 F_ALIAS. Use printf, not fprintf, when not passing a file
2899 (compare_opcodes): Check that identical instructions have
2900 identical opcodes, complain otherwise.
2903 * Include reg_names.
2905 Use dis-asm.h/read_memory_func interface.
2907 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2909 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2910 deliberately return non-zero to setjmp from longjmp. Otherwise
2911 this code fails to compile.
2913 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2915 * m68k-dis.c: Fix prototype for fetch_arg().
2917 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2919 * dis-buf.c: New file, for new read_memory_func interface.
2920 Makefile.in (OFILES): Include it.
2921 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2922 Use new read_memory_func interface.
2924 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2926 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2927 * h8500-opc.h: Fix couple of opcodes.
2929 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2931 * Makefile.in: add dvi & installcheck targets
2933 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2935 * Makefile.in: Update for h8500-dis.c.
2937 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2939 * h8500-dis.c, h8500-opc.h: New files
2941 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2943 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2944 ../include/dis-asm.h.
2945 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2946 and ../gdb/m68k-pinsn.c).
2947 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2948 and ../gdb/i386-pinsn.c).
2949 * m68881-ext.c: New file. Moved definition of
2950 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2951 * Makefile.in: Adjust for new files.
2952 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2953 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2954 can be dis-assembled.
2956 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2958 * mips-dis.c (print_insn_arg): Now returns void.
2960 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2962 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2963 files that use the macros.
2965 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2967 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2968 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2969 (CFILES): Added mips-dis.c.
2971 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2973 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2974 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2976 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2978 * Makefile.in: Improve *clean rules.
2979 * configure.in: Allow a default host.
2981 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2983 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2984 files include other sysdep files
2986 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2988 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2990 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2992 * configure.in: For host support, use ../bfd/configure.host
2993 so it stays in sync with the ../bfd/hosts database.
2995 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2997 * configure.in: use cpu-vendor-os triple instead of nested cases
2999 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3001 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3002 *always* the wrong one.
3004 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3006 * z8kgen.c: added copyright info
3008 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3010 * z8k-dis.c (unparse_instr): prettier tabs
3011 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3013 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3015 * configure.in: Add ncr* configuration.
3016 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3017 picayune ANSI compilers happy.
3019 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3021 * configure.in (i386): Make i386 and i486 synonymous for now.
3022 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3024 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3026 * Makefile.in (install): Fix typo.
3028 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3030 * Makefile.in (make): Remove obsolete crud.
3031 (sparc-opc.o): Avoid Sun Make VPATH bug.
3033 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3035 * Makefile.in: since there are no SUBDIRS, remove rule and
3036 references of subdir_do.
3038 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3040 * Makefile.in (install): Get the library name right here too.
3041 Don't install bfd.h, since it's unrelated to this library. No
3042 subdirs to recurse into, either.
3043 (CFILES): The source file has a .c suffix, not .o.
3045 * sparc-opc.c: New file, moved from BFD.
3046 * Makefile.in (OFILES): Build it.
3048 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3050 * z8k-dis.c: fixed forward refferences of some declarations.
3052 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3054 * Makefile.in: get the name of the library right
3056 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3058 * z8k-dis.c: knows how to disassemble z8k stuff
3059 * z8k-opc.h: new file full of z8000 opcodes
3063 version-control: never