* hppa-dis.c (signed_unsigned_names,mix_half_names,
[external/binutils.git] / opcodes / ChangeLog
1 Sat Aug 28 00:27:24 1999  Jerry Quinn <jquinn@nortelnetworks.com>
2
3         * hppa-dis.c (signed_unsigned_names,mix_half_names,
4         saturation_names):  New.
5         (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
6
7         * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'. 
8
9         * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
10
11         * hppa-dis.c (print_insn_hppa):  Look at next arg instead of bits
12         to decide to print a space.
13
14 1999-08-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
15
16         * i386-dis.c: Add AMD athlon instruction support.
17
18 1999-08-10  Ian Lance Taylor  <ian@zembu.com>
19
20         From Wally Iimura <iimura@microunity.com>:
21         * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
22         overflow at end of address space.
23         (generic_print_address): Use sprintf_vma.
24
25 1999-08-08  Ian Lance Taylor  <ian@zembu.com>
26
27         * Makefile.am: Rename .dep* files to DEP*.  Change DEP variable to
28         MKDEP.  Rebuild dependencies.
29         * Makefile.in: Rebuild.
30
31 Fri Aug  6 09:46:35 1999  Jerry Quinn <jquinn@nortelnetworks.com>
32
33         * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
34         add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
35         unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
36         (print_insn_hppa): Add 64 bit condition completers.
37
38 Thu Aug  5 16:59:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
39
40         * hppa-dis.c (print_insn_hppa): Change condition args to use
41         '?' prefix.
42
43 Wed Jul 28 04:33:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
44
45         * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
46         code.
47
48 1999-07-21  Ian Lance Taylor  <ian@zembu.com>
49
50         From Mark Elbrecht:
51         * configure.bat: Remove; obsolete.
52
53 1999-07-11  Ian Lance Taylor  <ian@zembu.com>
54
55         * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
56         (generic_strcat_address): Add cast to avoid warning.
57         * i386-dis.c: Initialize all structure fields to avoid warnings.
58         Add ATTRIBUTE_UNUSED as appropriate.
59
60 1999-07-08  Jakub Jelinek  <jj@ultra.linux.cz>
61
62         * sparc-dis.c (print_insn_sparc): Differentiate between
63         addition and oring when guessing symbol for comment.
64
65 1999-07-05  Nick Clifton  <nickc@cygnus.com>
66
67         * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
68         constant. 
69
70 1999-06-23  Alan Modra  <alan@spri.levels.unisa.edu.au>
71
72         * i386-dis.c: Mention intel mode specials in macro char comment.
73
74 1999-06-21  Ian Lance Taylor  <ian@zembu.com>
75
76         * alpha-dis.c: Don't include <stdlib.h>.
77         * arm-dis.c: Include "sysdep.h".
78         * tic30-dis.c: Don't include <stdlib.h> or <string.h>.  Include
79         "sysdep.h".
80         * Makefile.am: Rebuild dependencies.
81         * Makefile.in: Rebuild.
82
83 1999-06-16  Nick Clifton  <nickc@cygnus.com>
84
85         * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
86         SWIs. 
87
88 1999-06-14  Nick Clifton  <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
89
90         * arm-dis.c (arm_regnames): Turn into a pointer to a register
91         name set.
92         (arm_regnames_standard): New variable: Array of ARM register
93         names according to ARM instruction set nomenclature. 
94         (arm_regnames_apcs): New variable: Array of ARM register names
95         according to ARM Procedure Call Standard.
96         (arm_regnames_raw): New variable: Array of ARM register names
97         using just 'r' and the register number.
98         (arm_toggle_regnames): New function: Toggle the chosen register set
99         naming scheme.
100         (parse_disassembler_options): New function: Parse any target
101         disassembler command line options.
102         (print_insn_big_arm): Call parse_disassembler_options if any
103         are defined.
104         (print_insn_little_arm): Call parse_disassembler_options if any
105         are defined.
106
107 1999-06-13  Ian Lance Taylor  <ian@zembu.com>
108
109         * i386-dis.c (FWAIT_OPCODE): Define.
110         (used_prefixes): New static variable.
111         (fetch_data): Don't print an error message if we have already
112         fetched some bytes successfully.
113         (ckprefix): Clear used_prefixes.  Use FWAIT_OPCODE, not 0x9b.
114         (prefix_name): New static function.
115         (print_insn_i386): If setjmp fails, indicating a data error, but
116         we have managed to fetch some bytes, print the first one as a
117         prefix or a .byte pseudo-op.  If fwait is followed by a non
118         floating point instruction, print the first prefix.  Set
119         used_prefixes when prefixes are used.  If any prefixes were not
120         used after disassembling the instruction, print the first prefix
121         instead of printing the instruction.
122         (putop): Set used_prefixes when prefixes are used.
123         (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
124         (OP_DIR, OP_SIMD_Suffix): Likewise.
125
126 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
127
128         * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
129         Support signx %reg, clruw %reg.
130
131 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
132
133         * sparc-opc.c: Add aliases Solaris as supports.
134
135 Mon Jun  7 12:04:52 1999  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
136
137         * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
138         * Makefile.in: Regenerated.
139
140 1999-06-03  Philip Blundell  <philb@gnu.org>
141
142         * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
143         when target is PC-relative.
144
145 1999-05-28  Linus Nordberg  <linus.nordberg@canit.se>
146
147         * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC.  Add MACM/MSACM.  Add
148         MOVE MACSR,CCR.
149
150         * m68k-dis.c (fetch_arg): Add places `n', `o'.
151
152         * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
153         Add mcf5206e to appropriate instructions.
154         Add alias for MAC, MSAC.
155
156         * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
157         `N'.
158
159         * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
160         macw, remsl, remul for mcf5307.  Change mcf5200 --> mcf.
161
162         * m68k-dis.c: Add format `u' and places `h', `m', `M'.
163
164 1999-05-18  Alan Modra  <alan@spri.levels.unisa.edu.au>
165
166         * i386-dis.c (Ed): Define.
167         (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
168         (Rw): Remove.
169         (OP_rm): Rename to OP_Rd.
170         (ONE): Remove.
171         (OP_ONE): Remove.
172         (putop): Add const to template and p.
173         (print_insn_x86): Delete.
174         (print_insn_i386): Merge old function print_insn_x86.  Add const
175         to dp.
176         (struct dis386): Add const to name.
177         (dis386_att, dis386_intel): Add const.
178         (dis386_twobyte_att, dis386_twobyte_intel): Add const.
179         (names32, names16, names8, names_seg, index16): Add const.
180         (grps, prefix_user_table, float_reg): Add const.
181         (float_mem_att, float_mem_intel): Add const.
182         (oappend): Add const to s.
183         (OP_REG): Add const to s.
184         (ptr_reg): Add const to s.
185         (dofloat): Add const to dp.
186         (OP_C): Don't skip modrm, it's now done in OP_Rd.
187         (OP_D): Ditto.
188         (OP_T): Ditto.
189         (OP_Rd): Check for valid mod.  Call Op_E to print.
190         (OP_E): Handle d_mode arg.  Check for bad sfence,lea,lds etc.
191         (OP_MS): Check for valid mod.  Call Op_EM to print.
192         (OP_3DNowSuffix): Set obufp and use oappend rather than
193         strcat.  Call BadOp() for errors.
194         (OP_SIMD_Suffix): Likewise.
195         (BadOp): New function.
196
197 1999-05-12  Alan Modra  <alan@spri.levels.unisa.edu.au>
198
199         * i386-dis.c (dis386_intel): Remove macro chars, except for
200         jEcxz.  Change cWtR and cRtd to cW and cR.
201         (dis386_twobyte_intel): Remove macro chars here too.
202         (putop): Handle R and W macros for intel mode.
203
204         * i386-dis.c (SIMD_Fixup): New function.
205         (dis386_twobyte_att): Use it on movlps and movhps, and change
206         Ev to EX on these insns.  Change movmskps Ev, XM to Gv, EX.
207         (dis386_twobyte_intel): Same here.
208
209         * i386-dis.c (Av): Remove.
210         (Ap): remove lptr.
211         (lptr): Remove.
212         (OPSIMD): Define.
213         (OP_SIMD_Suffix): New function.
214         (OP_DIR): Remove dead code.
215         (eAX_reg..eDI_reg): Renumber.
216         (onebyte_has_modrm): Table numbering comments.
217         (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
218         (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
219         checks.  Print error on invalid dp->bytemode2.  Remove simd_cmp,
220         and handle SIMD cmp insns in OP_SIMD_Suffix.
221         (info->bytes_per_line): Bump from 5 to 6.
222         (OP_None): Remove.
223         (OP_E): Use INTERNAL_DISASSEMBLER_ERROR.  Handle sfence.
224         (OP_3DNowSuffix): Ensure mnemonic index unsigned.
225
226         PIII SIMD support from Doug Ledford <dledford@redhat.com>
227         * i386-dis.c (XM, EX, None): Define.
228         (OP_XMM, OP_EX, OP_None): New functions.
229         (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
230         (GRP14): Rename to GRPAMD.
231         (GRP*): Add USE_GROUPS flag.
232         (PREGRP*): Define.
233         (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
234         (twobyte_has_modrm): Add SIMD entries.
235         (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
236         (grps): Add SIMD insns.
237         (print_insn_x86): New vars uses_f3_prefix and simd_cmp.  Don't
238         oappend repz if uses_f3_prefix.  Add code to handle new groups for
239         SIMD insns.
240
241         From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
242         * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
243         operand from Av to Jv.
244
245 1999-05-07  Nick Clifton  <nickc@cygnus.com>
246
247         * mcore-dis.c (print_insn_mcore): Use .short to display
248         unidentified instructions, not .word.
249
250 1999-04-26  Tom Tromey  <tromey@cygnus.com>
251
252         * aclocal.m4, configure: Updated for new version of libtool.
253
254 1999-04-14  Doug Evans  <devans@casey.cygnus.com>
255
256         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
257         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
258
259 Mon Apr 12 23:46:17 1999  Jeffrey A Law  (law@cygnus.com)
260
261         * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
262         instructions.
263
264 1999-04-10  Doug Evans  <devans@casey.cygnus.com>
265
266         * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
267         * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
268
269 1999-04-06  Ian Lance Taylor  <ian@zembu.com>
270
271         * opintl.h (LC_MESSAGES): Never define.
272
273 1999-04-04  Ian Lance Taylor  <ian@zembu.com>
274
275         * i386-dis.c (intel_syntax, open_char, close_char): Make static.
276         (separator_char, scale_char): Likewise.
277         (print_insn_x86): Likewise.
278         (print_insn_i386): Likewise.  Add declaration.
279
280 1999-03-26  Doug Evans  <devans@casey.cygnus.com>
281
282         * fr30-dis.c: Rebuild.
283         * m32r-dis.c: Rebuild.
284
285 1999-03-23  Ian Lance Taylor  <ian@zembu.com>
286
287         * m68k-opc.c: Change compare instructions to use "@s" rather than
288         ";s" when used with an immediate operand.
289
290 1999-03-22  Doug Evans  <devans@casey.cygnus.com>
291
292         * cgen-opc.c (cgen_set_cpu): Delete.
293         (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
294         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
295         Rebuild.
296         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
297         Rebuild.
298         * po/opcodes.pot: Rebuild.
299
300 1999-03-16  Martin Hunt  <hunt@cygnus.com>
301
302         * d30v-opc.c (mvtsys): Remove FLAG_LKR.
303
304 1999-03-11  Doug Evans  <devans@casey.cygnus.com>
305
306         * cgen-opc.c (cgen_set_cpu): New arg `isa'.  All callers updated.
307         (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
308         (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
309         * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
310         * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
311         * m32r-opinst.c: Rebuild.
312
313 1999-02-25  Doug Evans  <devans@casey.cygnus.com>
314
315         * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
316         (cgen_hw_lookup_by_num): Rewrite.
317         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
318         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
319         * m32r-opinst.c: Rebuild.
320
321 Sat Feb 13 14:06:19 1999  Richard Henderson  <rth@cygnus.com>
322
323         * alpha-opc.c: Add sqrt+flags patterns.  Add EV6 PALcode insns.
324         (insert_jhint): Fix insertion mask.
325         * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
326
327 1999-02-10  Doug Evans  <devans@casey.cygnus.com>
328
329         * Makefile.in: Rebuild.
330
331 1999-02-09  Doug Evans  <devans@casey.cygnus.com>
332
333         * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
334         * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
335         * Makefile.am: Remove references to them.
336         (HFILES): Add fr30-desc.h,m32r-desc.h.
337         (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
338         m32r-opinst.c.
339         (ALL_MACHINES): Update.
340         * configure.in: Redo handling of cgen_files.
341         (bfd_i960_arch): Delete i960c-*.lo files.
342         * configure: Regenerate.
343         * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
344         (hash_insn_array): Rewrite.
345         * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
346         (hash_insn_array): Rewrite.
347         * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
348         (cgen_lookup_insn,cgen_get_insn_operands): Define here.
349         (cgen_lookup_get_insn_operands): Ditto.
350         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
351         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
352         * po/POTFILES.in: Rebuild.
353         * po/opcodes.pot: Rebuild.
354
355 Fri Feb  5 00:04:24 1999  Ian Lance Taylor  <ian@cygnus.com>
356
357         * Makefile.am: Rebuild dependencies.
358         (HFILES): Add fr30-opc.h.
359         (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
360         * Makefile.in: Rebuild.
361
362         * configure.in: Change AC_PREREQ to 2.13.  Remove AM_CYGWIN32.
363         Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
364         AC_PROG_INSTALL.
365         * acconfig.h: Remove.
366         * configure: Rebuild with current autoconf/automake.
367         * aclocal.m4: Likewise.
368         * config.in: Likewise.
369         * Makefile.in: Likewise.
370
371 Thu Feb  4 13:48:52 1999  Ian Lance Taylor  <ian@cygnus.com>
372
373         * m68k-opc.c: Correct move (not movew) to status word on 5200.
374
375 Mon Feb  1 20:54:36 1999  Catherine Moore  <clm@cygnus.com>
376
377         * disassemble.c (disassembler):  Handle bfd_mach_i386_i386_intel_syntax.
378         * i386-dis.c (x_mode):  Define.
379         (dis386):  Remove.
380         (dis386_att):  New.
381         (dis386_intel):  New.
382         (dis386_twobyte):  Remove.
383         (dis386_twobyte_att):  New.
384         (dis386_twobyte_intel):  New.
385         (print_insn_x86):  Use new arrays.
386         (float_mem):  Remove.
387         (float_mem_intel):  New.
388         (float_mem_att):  New.
389         (dofloat):  Use new float_mem arrays.
390         (print_insn_i386_att):  New.
391         (print_insn_i386_intel):  New.
392         (print_insn_i386):  Handle bfd_mach_i386_i386_intel_syntax.
393         (putop):  Handle intel syntax.
394         (OP_indirE):  Handle intel syntax.
395         (OP_E):  Handle intel syntax.
396         (OP_I):  Handle intel syntax.
397         (OP_sI):  Handle intel syntax.
398         (OP_OFF):  Handle intel syntax.
399
400
401
402 1999-01-27  Doug Evans  <devans@casey.cygnus.com>
403
404         * fr30-opc.h,fr30-opc.c: Rebuild.
405         * i960c-opc.h,i960c-opc.c: Rebuild.
406         * m32r-opc.c: Rebuild.
407
408 Tue Jan 19 18:01:54 1999  David Taylor  <taylor@texas.cygnus.com>
409
410         * hppa-dis.c: revert HP merge changes until HP gives us
411         an updated file.
412         
413 1999-01-19  Nick Clifton  <nickc@cygnus.com>
414
415         * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
416         offsets as well as symbloic address.
417
418 Tue Jan 19 10:51:01 1999  David Taylor  <taylor@texas.cygnus.com>
419
420         * hppa-dis.c: fix comments and some indentation.
421
422 1999-01-12  Doug Evans  <devans@casey.cygnus.com>
423
424         * fr30-opc.c,i960c-opc.c: Regenerate.
425
426 1999-01-11  Doug Evans  <devans@casey.cygnus.com>
427
428         * fr30-opc.c: Regenerate.
429
430 1999-01-06  Doug Evans  <devans@casey.cygnus.com>
431
432         * m32r-dis.c: Regenerate.
433
434 1999-01-05  Doug Evans  <devans@casey.cygnus.com>
435
436         * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
437         * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
438         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
439
440 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
441
442         * configure.in: Require autoconf 2.12.1 or higher.
443
444 1998-12-30  Gavin Romig-Koch  <gavin@cygnus.com>
445
446         * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
447
448 Wed Dec 16 16:17:49 1998  Dave Brolley  <brolley@cygnus.com>
449
450         * fr30-opc.c: Regenerated.
451
452 1998-12-16  Gavin Romig-Koch  <gavin@cygnus.com>
453
454         * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
455
456 1998-12-15  Dave Brolley  <brolley@cygnus.com>
457
458         * fr30-opc.c,fr30-opc.h: Regenerated.
459
460 1998-12-14  Dave Brolley  <brolley@cygnus.com>
461
462         * fr30-opc.c,fr30-opc.h: Regenerated.
463
464 Thu Dec 10 18:39:46 1998  Dave Brolley  <brolley@cygnus.com>
465
466         * fr30-opc.c,fr30-opc.h: Regenerated.
467
468 Thu Dec 10 12:49:24 1998  Doug Evans  <devans@canuck.cygnus.com>
469
470         * m32r-opc.c: Regenerate.
471
472 Tue Dec  8 13:56:18 1998  David Taylor  <taylor@texas.cygnus.com>
473
474         * dis-buf.c (generic_strcat_address): reformat to GNU coding
475         conventions.  change sprintf call to an sprintf_vma call.
476
477 Tue Dec  8 13:12:44 1998  Dave Brolley  <brolley@cygnus.com>
478
479         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
480
481 Tue Dec  8 10:50:46 1998  David Taylor  <taylor@texas.cygnus.com>
482
483         The following changes were made by
484         Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
485         David Taylor <taylor@texas.cygnus.com>, and
486         Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
487         merge in changes by HP; HP did not create ChangeLog entries.
488
489         * dis-buf.c (generic_strcat_address): new function.
490
491         * hppa-dis.c: Changes to improve hppa disassembly.
492           Changed formatting in : reg_names, fp_reg_names,control_reg, 
493           New variables : sign_extension_names, deposit_names, conversion_names
494             float_test_names, compare_cond_names_double, add_cond_names_double,
495             logical_cond_names_double, unit_cond_names_double, 
496             branch_push_pop_names, saturation_names, shift_names, mix_names,
497           New Macros :   GET_COMPL_O, GET_PUSH_POP,MERGED_REG 
498           Move some definitions to libhppa.h: GET_FIELD, GET_BIT
499           (fput_const): renamed as fput_hex_const
500           (print_insn_hppa):
501            - use the macros fputs_filtered and
502              fput_decimal_const whenever possible; calls to sign_extend require
503              2 params -- add a missing second param of 0.
504            - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
505              architecture version number of current machine. HP folks are
506              trying to handle situation where the target program was compiled
507              for PA 1.x (32-bit), but is running on a PA 2.0 machine and 
508              visa versa.
509            - added new cases : 'g', 'B', 'm'
510            - added cases specifically for PA 2.0
511            - changed the following cases : '"', 'n', 'N', 'p', 'Z', 
512            - calls to fput_const become calls to fput_hex_const
513
514 1998-12-07  James E Wilson  <wilson@wilson-pc.cygnus.com>
515
516         * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
517         (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
518         (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
519         * Makefile.in: Rebuilt.
520         * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
521         i960-dis.c to ta.
522         * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
523         * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
524         
525 Mon Dec  7 14:33:44 1998  Dave Brolley  <brolley@cygnus.com>
526
527         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
528
529 Sun Dec  6 14:06:48 1998  Ian Lance Taylor  <ian@cygnus.com>
530
531         * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
532
533         * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
534         From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
535
536 Fri Dec  4 17:45:51 1998  Doug Evans  <devans@canuck.cygnus.com>
537
538         * fr30-opc.c: Regenerate.
539
540 Fri Dec  4 17:08:08 1998  Dave Brolley  <brolley@cygnus.com>
541
542         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
543
544 Thu Dec  3 14:26:20 1998  Dave Brolley  <brolley@cygnus.com>
545
546         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
547
548 Thu Dec  3 00:09:17 1998  Doug Evans  <devans@canuck.cygnus.com>
549
550         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
551
552 1998-11-30  Doug Evans  <devans@casey.cygnus.com>
553
554         * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
555         CGEN_INSN_BASE_VALUE.
556         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
557         * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
558
559 Thu Nov 26 11:26:32 1998  Dave Brolley  <brolley@cygnus.com>
560
561         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
562
563 Tue Nov 24 11:20:54 1998  Dave Brolley  <brolley@cygnus.com>
564
565         * fr30-asm.c,fr30-dis.c: Regenerated.
566
567 Mon Nov 23 18:28:48 1998  Dave Brolley  <brolley@cygnus.com>
568
569         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
570
571 1998-11-20  Doug Evans  <devans@tobor.to.cygnus.com>
572
573         * fr30-opc.c: Regenerated.
574
575 Thu Nov 19 16:02:46 1998  Dave Brolley  <brolley@cygnus.com>
576
577         * fr30-opc.c: Regenerated.
578         * fr30-opc.h: Regenerated.
579         * fr30-dis.c: Regenerated.
580         * fr30-asm.c: Regenerated.
581
582 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
583
584         * mips-opc.c (sync.p,sync.l): Swap insn values.
585
586 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
587
588         * fr30-opc.c: Regenerate.
589
590 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
591
592         * fr30-opc.c: Regenerated.
593         * fr30-opc.h: Regenerated.
594
595 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
596
597         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
598         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
599
600 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
601
602         * fr30-opc.c: Regenerated.
603
604 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
605         
606         * fr30-opc.c: Regenerated.
607         * fr30-opc.h: Regenerated.
608         * fr30-dis.c: Regenerated.
609         * fr30-asm.c: Regenerated.
610
611 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
612
613         * po/opcodes.pot: Regenerated.
614         * fr30-opc.c: Regenerated.
615         * fr30-opc.h: Regenerated.
616         * fr30-dis.c: Regenerated.
617         * fr30-asm.c: Regenerated.
618
619 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
620
621         * disassemble.c (disassembler): Add support for FR30 target.
622         
623 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
624
625         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
626         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
627
628 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
629
630         * po/opcodes.pot: Regenerate.
631         * po/POTFILES.in: Regenerate.
632         * fr30-opc.c: Regenerate.
633         * fr30-opc.h: Regenerate.
634
635 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
636
637         * m32r-asm.c: Regenerate.
638
639 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
640
641         * configure.in: Added case for bfd_fr30_arch.
642         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
643         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
644         (CLEANFILES): Added stamp-fr30.
645         (FR30_DEPS): Added.
646         * fr30-asm.c: New file.
647         * fr30-dis.c: New file.
648         * fr30-opc.c: New file.
649         * fr30-opc.h: New file.
650         * po/POTFILES.in: Regenerated
651         * po/opcodes.pot: Regenerated
652
653 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
654
655         * configure.in: detect cygwin* instead of cygwin32*
656         * configure: regenerate
657
658 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
659
660         * mips-opc.c (IS_M): Added.
661
662 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
663
664         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
665
666 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
667
668         * m32r-opc.h,m32r-opc.c: Regenerate.
669
670 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
671
672         * i386-dis.c (OP_3DNowSuffix): New static function.
673         (OPSUF): Define.
674         (GRP14): Define.
675         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
676         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
677         (insn_codep): New static variable.
678         (print_insn_x86): Init insn_codep after prefixes.
679         (grps): Add GRP14 entries for prefetch, prefetchw.
680         (OP_REG): Reformat.
681
682         From Jeff B Epler <jepler@usgs.gov>
683         * i386-dis.c (Suffix3DNow): New table.
684
685 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
686
687         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
688
689 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
690
691         * d10v-dis.c (print_operand): If num is nonzero, then
692         add OPERAND_ACC1, not OPERAND_ACC0.
693
694 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
695
696         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
697         insns. 
698
699 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
700
701         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
702         class. 
703
704 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
705
706         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
707
708 1998-09-09  Michael Meissner  <meissner@cygnus.com>
709
710         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
711         to/from SPRs.
712
713 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
714
715         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
716         object files.
717         (print_insn_little_arm): Detect Thumb symbols in elf object
718         files. 
719
720 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
721
722         * alpha-dis.c (print_insn_alpha): Use the machine type to
723         decide which PALcode set to include.
724
725 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
726
727         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
728
729 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
730
731         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
732         MSUB and MSUBS instructions.
733
734 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
735
736         * ppc-opc.c (powerpc_operands): Omit parens around additions in
737         operand name macros.
738
739 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
740
741         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
742         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
743         +, -, and d for ColdFire.
744
745         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
746         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
747         (extract_mbe): Likewise.
748
749 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
750
751         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
752
753         * m10300-opc.c: First cut at UDF instructions.
754
755 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
756
757         * m32r-opc.c: Regenerate (remove semantic descriptions).
758
759 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
760
761         * arm-dis.c (print_insn_big_arm):  Fix indentation.
762         (print_insn_little_arm): Likewise.
763
764 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
765
766         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
767         attributes.
768         (print_insn_little_arm): Likewise.
769
770 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
771
772         Move all global state data into opcode table struct, and treat
773         opcode table as something that is "opened/closed".
774         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
775         (cgen_asm_init): Delete.
776         (cgen_set_parse_operand_fn): New function.
777         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
778         (cgen_dis_init): Delete.
779         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
780         (cgen_current_{opcode_table_mach,endian}): Delete.
781         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
782
783 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
784
785         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
786         instructions.
787
788 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
789
790         * m10300-opc.c: Add entries for "no_match_operands" field in
791         the opcode table.
792
793 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
794
795         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
796
797 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
798
799         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
800
801 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
802
803         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
804         the first prefix.
805         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
806         than `fnstsw %eax'.
807         (OP_J): Remove unnecessary subtraction when 16-bit displacement
808         will be masked later.
809
810 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
811
812         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
813
814 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
815
816         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
817
818 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
819
820         * m10300-dis.c: Only recognize instructions from the currently
821         selected machine.
822         * m10300-opc.c: Add field indicating the particular variant of
823         the mn10300 each instruction is available on.
824
825 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
826
827         * configure.in: For bfd_vax_arch, build vax-dis.lo.
828         * Makefile.am: Rebuild dependencies.
829         (CFILES): Add vax-dis.c.
830         (ALL_MACHINES): Add vax-dis.lo.
831         * aclocal.m4: Rebuild with current libtool.
832         * configure, Makefile.in: Rebuild.
833
834 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
835
836         * vax-dis.c: New file, from work by Pauline Middelink
837         <middelin@polyware.iaf.nl>.
838         * disassemble.c (ARCH_vax): Define if ARCH_all.
839         (disassembler): Add case for ARCH_vax.
840         * makefile.vms: Support compilation on vms/vax.
841
842 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
843
844         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
845         related to sign extension and the size of ints.
846
847 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
848
849         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
850         instructions.  Support (sp) addressing mode by expanding it into
851         (0,sp).
852
853 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
854
855         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
856
857 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
858
859         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
860
861 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
862
863         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
864         sysexit.
865
866 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
867
868         * mips-dis.c (print_insn_little_mips): Previously, instruction
869         printing references the symbol table to determine whether the
870         instruction resides in a block regular instructions or mips16
871         instructions. However, when the disassembler gets used in other
872         environments where the symbol table is not present, we no longer
873         rely in the symbol table, rather, use the low bit of the
874         instructions address to guess. There should be no change for usage
875         of the disassembler in host based programs, gdb, objdump.
876         (print_insn_big_mips): ditto.
877         (print_insn_mips): ditto
878
879 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
880
881         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
882
883 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
884
885         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
886
887 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
888
889         * i386-dis.c (index16): Add '%' to register names.  Use ','
890         instead of '+'.
891
892 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
893
894         * i386-dis.c: Don't print opcode suffix when we can figure out the
895         size (and gas can!) by register operands, or from the default
896         size.
897         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
898         macro to 'E'.
899         (dis386, dis386_twobyte, grps): Use new suffix macros.
900         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
901         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
902         order of cmps operands to agree with Intel docs.  Correct operand
903         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
904         agree with Intel docs.
905         (print_insn_x86): Print orphan fwait before other prefixes.
906         Return correct byte count for orphan fwait with prefixes.  Don't
907         print `bound' operands in reverse order.
908         (ckprefix): Stop accumulating prefixes if we get fwait.
909         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
910
911 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
912
913         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
914         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
915
916 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
917
918         Fix problems when bfd_vma is wider than long.
919         * i386-dis.c: Make op_address and start_pc unsigned.
920         (set_op): Make parameter unsigned.
921         (print_insn_x86): Cast to bfd_vma when passing a value to
922         print_address_func.
923         * ns32k-dis.c (CORE_ADDR): Don't define.
924         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
925         bfd_scan_vma to read back address.
926         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
927         to format it.
928         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
929         (NEXTULONG): New definition.
930         (print_insn_m68k): Avoid overflow when computing third argument of
931         print_insn_arg.
932         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
933         Use disp instead of val to store offset values.
934         (print_indexed): Use base_disp instead of word to store base
935         displacement, to avoid overflow.
936         * m10300-dis.c (disassemble): Cast value to long when computing
937         pc-relative address, to get correct sign extension.
938
939 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
940
941         * m32r-opc.c: Regenerate.
942
943 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
944
945         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
946         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
947
948 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
949
950         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
951
952 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
953
954         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
955         functions to void.
956         (OP_DSreg): Rename from OP_DSSI.
957         (OP_ESreg): Rename from OP_ESDI.
958         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
959         (DSBX): Define.
960         (append_seg): Rename from append_prefix.
961         (ptr_reg): New function.
962         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
963         Add DSBX for xlat.
964         (PREFIX_ADDR): Rename from PREFIX_ADR.
965         (float_reg): Add non-broken opcodes for people who don't want
966         UNIXWARE_COMPAT.
967
968 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
969
970         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
971         68000/68008/68010.
972
973 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
974
975         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
976
977 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
978
979         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
980         0; produce error message for shifts of size 32 (or 64 for 64-bit
981         shifts), because the hardware doesn't support them.
982
983 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
984
985         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
986         LONG_2, LONG_2b formats to use this new operand.
987
988 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
989
990         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
991
992 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
993
994         * sparc-dis.c (print_insn_sparc): big endian instruction / little
995         endian data support.
996
997 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
998
999         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1000         and SHORT_B3b formats to use Rb instead of Ra.
1001
1002         Add FLAG_MUL16 to MUL2XH opcode.
1003
1004         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1005         to existing 1.1.1 parallelisation prohibition procedure.
1006
1007 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
1008
1009         * m32r-asm.c,m32r-dis.c: Regenerate.
1010
1011 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1012
1013         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1014         with a shift count of 0.
1015
1016 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
1017
1018         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1019         (cgen_hw_lookup_by_num): New function.
1020
1021 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
1022
1023         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1024
1025 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
1026
1027         * sparc-dis.c (print_insn_sparc): Always fetch instructions
1028         as big-endian on SPARClite.
1029
1030 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
1031
1032         * d30v-opc.c (pre_defined_register): Remove alias for r0.
1033
1034 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
1035
1036         * po/Make-in (install-info): New target.
1037
1038 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
1039
1040         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1041         * configure: Rebuild.
1042
1043 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
1044
1045         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1046         variety of ISA2 instructions to set bottom ten bits of trap code.
1047
1048 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
1049
1050         * Makefile.am (config.status): Add explicit target so that
1051         config.status depends upon bfd/configure.in.
1052         * Makefile.in: Rebuild.
1053
1054 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1055
1056         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1057         instructions to set bottom ten bits of break code.
1058         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1059         for above optional argument.
1060
1061 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
1062
1063         * makefile.vms: Run dec c with /nodebug.
1064
1065 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
1066
1067         * Makefile.in: Rebuilt.
1068         * Makefile.am: Regenerated dependencies with mkdep.
1069
1070         * opintl.h (_): Define as dgettext.
1071
1072 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
1073
1074         * cgen-asm.c: Internationalised.
1075         * m32r-asm.c: Internationalised.
1076         * m32r-dis.c: Internationalised.
1077         * m32r-opc.c: Internationalised.
1078
1079         * aclocal.m4: Regenerated.
1080         * configure: Regenerated.
1081         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1082         * Makefile.in: Rebuild.
1083         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1084         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1085
1086 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1087
1088         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
1089         after AC_PROG_CC.
1090         * aclocal.m4, configure: Rebuild with current tools.
1091
1092 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
1093
1094         * opintl.h: New file - contains internationalisation macros used
1095         by source files in this directory.
1096         * po/: New subdirectory - contains internationalisation files.
1097         * po/Make-in: New file - Makefile constructor.
1098         * po/POTFILES.in: New file - list of files in opcodes directory
1099         that should be scan for internationalisation macros.
1100         * po/opcodes.pot: New file - list of internationisation strings
1101         found in files mentioned in po/POTFILES.in.
1102         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
1103         entry.  Add intl directory to include paths.
1104         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1105         HAVE_STRCPY, HAVE_LC_MESSAGES
1106         * configure.in: Add rule to build Makefile in po subdirectory.
1107         * Makefile.in: Rebuilt.
1108         * aclocal.m4: Rebuilt.
1109         * config.in: Rebuilt.
1110         * configure: Rebuilt.
1111         * alpha-opc.c: Internationalised.
1112         * arc-dis.c: Internationalised.
1113         * arc-opc.c: Internationalised.
1114         * arm-dis.c: Internationalised.
1115         * cgen-asm.c: Internationalised.
1116         * d30v-dis.c: Internationalised.
1117         * dis-buf.c: Internationalised.
1118         * h8300-dis.c: Internationalised.
1119         * h8500-dis.c: Internationalised.
1120         * i386-dis.c: Internationalised.
1121         * m10200-dis.c: Internationalised.
1122         * m10300-dis.c: Internationalised.
1123         * m68k-dis.c: Internationalised.
1124         * m88k-dis.c: Internationalised.
1125         * mips-dis.c: Internationalised.
1126         * ns32k-dis.c: Internationalised.
1127         * opintl.h: Internationalised.
1128         * ppc-opc.c: Internationalised.
1129         * sparc-dis.c: Internationalised.
1130         * v850-dis.c: Internationalised.
1131         * v850-opc.c: Internationalised.
1132
1133 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
1134
1135         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1136         (asm_hash_table_entries): New variable.
1137         (cgen_asm_init): Free asm_hash_table_entries.
1138         (hash_insn_array,hash_insn_list): New functions.
1139         (build_asm_hash_table): Use them.  Hash macro insns as well.
1140         (cgen_asm_lookup_insn): Update.
1141         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1142         (dis_hash_table_entries): New variable.
1143         (cgen_dis_init): Free dis_hash_table_entries.
1144         (hash_insn_array,hash_insn_list): New functions.
1145         (build_dis_hash_table): Use them.  Hash macro insns as well.
1146         (cgen_dis_lookup_insn): Update.
1147         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1148         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1149         (cgen_macro_insn_count): New function.
1150         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1151
1152 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1153
1154         * i386-dis.c (OP_DSSI): Print segment override.
1155
1156 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
1157
1158         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1159         operator.
1160
1161 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1162
1163         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1164         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1165         * configure.in: Define and substitute WIN32LDFLAGS and
1166         WIN32LIBADD.
1167         * aclocal.m4: Rebuild with new libtool.
1168         * configure, Makefile.in: Rebuild.
1169
1170 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1171
1172         * m32r-opc.c: Regenerate.
1173
1174 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1175
1176         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1177         before trying to copy it.
1178         * Makefile.in: Rebuild.
1179
1180 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1181
1182         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1183
1184 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1185
1186         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1187         from an arbitrary valid buffer instead of fetching them on demand
1188         using fetch_data().
1189         (invalid_float): use bit_extract_simple() instead of bit_extract().
1190
1191 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1192
1193         From H.J. Lu <hjl@gnu.org>:
1194         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1195         to Ev for both.
1196
1197 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1198
1199         * Branched binutils 2.9.
1200
1201 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1202
1203         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1204         disassembling last 4 bytes of a section.
1205
1206 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1207
1208         Fix some gcc -Wall warnings:
1209         * arc-dis.c (print_insn): Add casts to avoid warnings.
1210         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1211         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1212         * m10200-dis.c (disassemble): Likewise.
1213         * m10300-dis.c (disassemble): Likewise.
1214         * ns32k-dis.c (print_insn_ns32k): Likewise.
1215         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1216         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1217         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1218         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1219         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1220         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1221         * tic80-dis.c (print_one_instruction): Likewise.
1222         * w65-dis.c (print_operand): Likewise.
1223         * z8k-dis.c (fetch_data): Likewise.
1224         * a29k-dis.c: Add return type for find_byte_func_type.
1225         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1226         insert_multshift and extract_multshift.
1227         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1228         conditionals.
1229         (extract_value): Fully parenthesize expression.
1230         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1231         * h8500-opc.h (h8500_table): Fully bracket initializer.
1232         * w65-opc.h (optable): Likewise.
1233         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1234         * i386-dis.c (OP_E): Initialize local variables.
1235         * m10200-dis.c (print_insn_mn10200): Likewise.
1236         * mips-dis.c (print_insn_mips16): Likewise.
1237         * sh-dis.c (print_insn_shx): Likewise.
1238         * v850-dis.c (print_insn_v850): Likewise.
1239         * ns32k-dis.c (print_insn_arg): Declare.
1240         (get_displacement, invalid_float): Declare.
1241         (list_search, sign_extend, flip_bytes): Declare return type.
1242         (get_displacement): Likewise.
1243         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1244         string.
1245         (print_insn_ns32k): Make i unsigned.
1246         (invalid_float): Make static.  Declare type of val.
1247         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1248         on each for iteration.
1249         * tic30-dis.c (get_indirect_operand): Likewise.
1250         * z8k-dis.c (print_insn_z8001): Declare return type.
1251         (print_insn_z8002): Likewise.
1252         (unparse_instr): Fix sprintf format strings.
1253
1254 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1255
1256         * mips-opc.c: Add "sync.l" and "sync.p".
1257
1258 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1259
1260         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1261         default m68k variant to recognize.
1262
1263         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1264         (ctrl, cobr, mem, ea): Likewise.
1265         (print_addr): Likewise.  Remove cast.
1266         (ea): Cast argument of print_addr to bfd_vma.
1267
1268         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1269         variable value.
1270         (cgen_parse_unsigned_integer): Likewise.
1271         (cgen_parse_address): Likewise.
1272
1273 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1274
1275         * i960-dis.c (ctrl): Add full braces to structure initialization.
1276         (cobr, mem, reg): Likewise.
1277         (ea): Correct parenthesization in expression.
1278
1279         * cgen-asm.c: Include <ctype.h>.
1280         (build_asm_hash_table): Remove unused local variable i.
1281         (cgen_parse_keyword): Add casts to avoid warnings.
1282
1283         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1284         symbol.  Fix indentation.
1285         (print_insn_little_arm): Likewise.
1286
1287 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1288
1289         * configure.in: Use AM_DISABLE_SHARED.
1290         * aclocal.m4, configure: Rebuild with libtool 1.2.
1291
1292 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1293
1294         These patches are courtesy of Jonathan Walton and Tony Thompson
1295         (athompso@cambridge.arm.com).
1296
1297         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1298         relative addresses.
1299
1300         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1301         both the offset and the label closest to the destination.
1302
1303 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1304
1305         * m32r-opc.h: Regenerate.
1306
1307 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1308
1309         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1310
1311 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1312
1313         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1314         assume that info->symbols is non-empty.
1315
1316 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1317
1318         * alpha-opc.c (cvtqs) There is no such thing.
1319         (cvttq): Missing most of the /*d variants.
1320
1321 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1322
1323         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1324         delayed branches or jumps.
1325
1326 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1327
1328         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1329         to *info->symbols.
1330         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1331         * tic30-dis.c (print_branch): Likewise.
1332
1333 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1334
1335         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1336         saved_symbol code as it is no longer needed.
1337
1338 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1339
1340         * cgen-asm.c: Include symcat.h.
1341         * cgen-dis.c,cgen-opc.c: Ditto.
1342         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1343
1344 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1345
1346         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1347
1348 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1349
1350         * m32r-opc.[ch]: Regenerate.
1351
1352 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1353
1354         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1355         arguments.  Don't perform validation here.
1356         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1357
1358 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1359
1360         * m32r-opc.c: Regenerate.
1361
1362 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1363
1364         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1365         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1366
1367 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1368
1369         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1370
1371 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1372
1373         * configure.in: Get the version number from BFD.
1374         * configure: Rebuild.
1375
1376         From H.J. Lu <hjl@gnu.org>:
1377         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1378         * Makefile.in: Rebuild.
1379
1380 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1381
1382         * m32r-opc.c: Regenerate.
1383         * m32r-opc.h: Regenerate.
1384
1385 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
1386
1387         * m32r-opc.c: Regenerate.
1388
1389 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
1390
1391         Fix rac to accept only a0:
1392         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1393         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1394         Introduce OPERAND_GPR.
1395         * d10v-dis.c (print_operand): Likewise.
1396
1397 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
1398
1399         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1400         (cgen_hw_lookup): Make result const.
1401         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1402
1403 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1404
1405         * configure, aclocal.m4: Rebuild with new libtool.
1406
1407 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
1408
1409         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1410         instructions use a PC relative branch, not absolute.
1411
1412 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
1413
1414         * configure.in: Set libtool_enable_shared rather than
1415         libtool_shared.  Remove diversion hack.
1416         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1417
1418 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
1419
1420         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1421         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1422
1423 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
1424
1425         * tic30-dis.c: New file.
1426         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1427         * configure.in: Handle bfd_tic30_arch.
1428         * Makefile.am: Rebuild dependencies.
1429         (CFILES): Add tic30-dis.c
1430         (ALL_MACHINES): Add tic30-dis.lo.
1431         * configure, Makefile.in: Rebuild.
1432
1433 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
1434
1435         * m32r-opc.h (HAVE_CPU_M32R): Define.
1436
1437 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
1438
1439         * v850-opc.c (insertion routines): If both alignment and size is
1440         wrong then report this.
1441
1442 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
1443
1444         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1445         Only recognize instructions for the current target_processor.
1446
1447 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
1448
1449         * d10v-dis.c (PC_MASK): Correct value.
1450         (print_operand): If there's a reloc, don't calculate the
1451         address because they could be in different sections.
1452
1453 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
1454
1455         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1456         instruction after the 4650's "mul" instruction; nobody's using the
1457         4010 these days.  If object files someday indicate which processor
1458         variant they're intended for, we can do a better job at this.
1459
1460 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1461
1462         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1463         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1464         (cgen_parse_keyword): Rewrite.
1465         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1466         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1467         * cgen-opc.c: Clean up pass over `struct foo' usage.
1468         (cgen_keyword_lookup_value): Handle "" entry.
1469         (cgen_keyword_add): Likewise.
1470
1471 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1472
1473         * mips-opc.c: Add FP_D to s.d instruction flags.
1474
1475 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1476
1477         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1478
1479 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1480
1481         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1482         PC relative offset forms before the 15 bit forms.  An assembler command
1483         line option now chooses the default.
1484
1485 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1486
1487         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1488         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1489
1490 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1491
1492         * configure: Only build libopcodes shared if --enable-shared's value
1493         was `yes', or was set to `*opcodes*'.
1494         * aclocal.m4: Likewise.
1495         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1496         original source of this bit of code.  It's not clear what the best fix
1497         would be, though.
1498
1499 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1500
1501         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1502         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1503         offset forms before the 15 bit forms, to default to the long forms.
1504
1505 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1506
1507         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1508
1509 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1510
1511         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1512         symbol if none is present.
1513         (print_insn_big_arm):  Prevent examination of stored symbol if
1514         none is present.
1515
1516 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1517
1518         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1519
1520 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1521
1522         * disassemble.c: Remove disasm_symaddr() function.
1523
1524         * arm-dis.c: Use info->symbol instead of info->flags to determine
1525         if disassmbly should be in Thumb or Arm mode.
1526
1527 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1528
1529         * arm-dis.c: Add support for disassembling Thumb opcodes.
1530         (print_insn_thumb): New function.
1531
1532         * disassemble.c (disasm_symaddr): New function.
1533
1534         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1535         (thumb_opcodes): Table of Thumb opcodes.
1536
1537 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1538
1539         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1540
1541         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1542         and 'v' as operand types.
1543
1544 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1545
1546         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1547         <olivier.carmona@di.epfl.ch>.
1548         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1549         which has a two word opcode with a one word argument.
1550
1551 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1552
1553         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1554         unsigned, not signed.
1555         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1556
1557 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1558
1559         * d10v-dis.c (print_operand):
1560         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1561
1562 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1563
1564         * d10v-opc.c (OPERAND_FLAG): Split into:
1565         (OPERAND_FFLAG, OPERAND_CFLAG) .
1566         (FSRC): Split into:
1567         (FFSRC, CFSRC).
1568
1569 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1570
1571         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1572         field for all INSN_MACRO's.
1573         * mips16-opc.c: same
1574
1575 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1576
1577         * mips-opc.c (sync,cache): These are 3900 insns.
1578
1579 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1580
1581         sh-opc.h (sh_table): Remove ftst/nan.
1582
1583 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1584
1585         * mips-opc.c (ffc, ffs): Fix mask.
1586
1587 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1588
1589         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1590         control registers.
1591
1592 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1593
1594         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1595         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1596
1597 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1598
1599         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1600         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1601
1602 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1603
1604         * v850-dis.c (disassemble): Replace // with /* ... */
1605
1606 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1607
1608         * sparc-opc.c: Add wr & rd for v9a asr's.
1609         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1610         (v9a_asr_reg_names): New variable.
1611         Patch from David Miller <davem@vger.rutgers.edu>.
1612
1613 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1614
1615         * sparc-opc.c (v9notv9a): New insn type.
1616         (IMPDEP): Move to the end to not conflict with edge8 et al.
1617         Patch from David Miller <davem@vger.rutgers.edu>.
1618
1619 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1620
1621         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1622
1623 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1624
1625         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1626
1627 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1628
1629         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1630         of disassemble_info structure to determine if an overlay address
1631         has a matching symbol in low memory.
1632
1633         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1634         new symbol_at_address_func field in disassemble_info structure.
1635
1636 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1637
1638         * v850-opc.c (extract_d22): Use signed arithmatic.
1639
1640 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1641
1642         * mips-opc.c: Three op mult is not an ISA insn.
1643
1644 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1645
1646         * mips-opc.c: Fix formatting.
1647
1648 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1649
1650         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1651         than assuming that char is signed.  Explicitly sign extend 16 bit
1652         values, rather than assuming that short is 16 bits.
1653         (OP_sI, OP_J, OP_DIR): Likewise.
1654
1655 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1656
1657         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1658         system registers.
1659
1660 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1661
1662         * v850-opc.c: Fix typo in comment.
1663
1664         * v850-dis.c (disassemble): Add test of processor type when
1665         determining opcodes.
1666
1667 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1668
1669         * configure.in: Use a diversion to set enable_shared before the
1670         arguments are parsed.
1671         * configure: Rebuild.
1672
1673 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1674
1675         * m68k-opc.c (TBL1): Use ! rather than `.
1676         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1677
1678 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1679
1680         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1681
1682         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1683
1684         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1685         for mcf5200.
1686
1687         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1688         * aclocal.m4: Rebuild with new libtool.
1689         * configure: Rebuild.
1690
1691 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1692
1693         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1694
1695 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1696
1697         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1698
1699 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1700
1701         * v850-opc.c (v850_opcodes): Further rearrangements.
1702
1703 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1704
1705         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1706
1707 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1708
1709         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1710         parser to work.
1711
1712 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1713
1714         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1715
1716 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1717
1718         * v850-opc.c: Initialise processors field of v850_opcode structure.
1719
1720 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1721
1722         Merge changes from Martin Hunt:
1723
1724         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1725
1726         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1727         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1728         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1729
1730         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1731
1732         * d30v-dis.c (print_insn): First operand of d*i (delayed
1733         branch) instructions is relative.
1734
1735         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1736         (d30v_operand_table): Add IMM6S3 type.
1737         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1738
1739         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1740         and cmp instructions.
1741
1742         * d30v-opc.c: Correct entries for repeat*, and sat*.
1743         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1744         types. Correct several formats.
1745
1746         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1747
1748         * d30v-opc.c (pre_defined_registers): Change control registers.
1749
1750         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1751         SHORT_C2.  Manual was incorrect.
1752
1753         * d30v-dis.c (lookup_opcode):  Return value now indicates
1754         if an opcode has a short and a long form.  Used for deciding
1755         to append a ".s" or ".l".
1756         (print_insn): Append a ".s" to an instruction if it is
1757         the short form and ".l" if it is a long form. Do not append
1758         anything if the instruction has only one possible size.
1759
1760         * d30v-opc.c: Change mulx2h to require an even register.
1761         New form: SHORT_A2; a SHORT_A form that needs an even
1762         register as the first operand.
1763
1764         * d30v-dis.c (print_insn_d30v): Fix problem where the last
1765         instruction was not being disassembled if there were an odd
1766         number of instructions.
1767
1768         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
1769
1770 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
1771
1772         * v850-dis.c (disassemble): Improved display of register lists.
1773
1774 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
1775
1776         * sparc-opc.c (sparc_opcodes): Fix assembler args to
1777         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1778         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1779         fandnot1s, fandnot2s.
1780
1781 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
1782
1783         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1784
1785 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1786
1787         * cgen-asm.c (cgen_parse_address): New argument resultp.
1788         All callers updated.
1789         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1790
1791 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
1792
1793         * mn10200-dis.c (disassemble): PC relative instructions are
1794         relative to the next instruction, not the current instruction.
1795
1796 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
1797
1798         * v850-dis.c (disassemble): Only signed extend values that are not
1799         returned by extract functions.
1800         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1801
1802 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
1803
1804         * v850-opc.c: Update comments.  Remove use of
1805         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
1806
1807 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
1808
1809         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1810
1811 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
1812
1813         * configure: Rebuilt with latest devo autoconf for NT support.
1814
1815 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
1816
1817         * v850-dis.c (disassemble): Use curly brace syntax for register
1818         lists.
1819
1820         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1821         where r0 is being used as a destination register.
1822
1823 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
1824
1825         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1826
1827 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
1828
1829         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1830
1831 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
1832
1833         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1834         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1835         opcodes..
1836
1837 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1838
1839         * configure (cgen_files): Add support for v850e target.
1840         * configure.in (cgen_files):  Add support for v850e target.
1841
1842 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1843
1844         * configure (cgen_files): Add support for v850ea target.
1845         * configure.in (cgen_files):  Add support for v850ea target.
1846
1847 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
1848
1849         * configure.in (bfd_arc_arch): Add.
1850         * configure: Rebuild.
1851         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1852         * Makefile.in: Rebuild.
1853         * arc-dis.c, arc-opc.c: New files.
1854         * disassemble.c (ARCH_all): Define ARCH_arc.
1855         (disassembler): Add ARC support.
1856
1857 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
1858
1859         * v850-dis.c (disassemble): Add support for v850EA instructions.
1860
1861         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1862         (v850_opcodes): Add v850EA instructions.
1863
1864         * v850-dis.c (disassemble): Add support for v850E instructions.
1865
1866         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1867         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1868         insert_spe, extract_spe): New Functions.
1869         (v850_opcodes): Add v850E instructions.
1870
1871         * v850-opc.c: Reorganised and re-layed out to improve readability
1872         and portability.
1873
1874 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
1875
1876         * configure: Rebuild with autoconf 2.12.1.
1877
1878 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1879
1880         * aclocal.m4, configure: Rebuild with new automake patches.
1881
1882 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
1883
1884         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1885         * acinclude.m4: Just include acinclude.m4 from BFD.
1886         * aclocal.m4, configure: Rebuild.
1887
1888 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
1889
1890         * Makefile.am: New file, based on old Makefile.in.
1891         * acconfig.h: New file.
1892         * acinclude.m4: New file.
1893         * stamp-h.in: New file.
1894         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1895         Removed shared library handling; now handled by libtool.  Replace
1896         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
1897         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
1898         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
1899         handling in AC_OUTPUT.
1900         * dep-in.sed: Change .o to .lo.
1901         * Makefile.in: Now built with automake.
1902         * aclocal.m4: Now built with aclocal.
1903         * config.in, configure: Rebuild.
1904
1905 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
1906
1907         * mips-opc.c: Fix typo/thinko in "eret" instruction.
1908
1909 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
1910
1911         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1912         Make array const.
1913         * sparc-dis.c (sorted_opcodes): New static local.
1914         (struct opcode_hash): `opcode' is pointer to const element.
1915         (build_hash): First arg is now table of sorted pointers.
1916         (print_insn_sparc): Sort opcodes by sorting table of pointers.
1917         (compare_opcodes): Update.
1918
1919 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
1920
1921         * cgen-opc.c: #include <ctype.h>.
1922         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
1923         Handle case insensitive hashing.
1924         (hash_keyword_value): Change type of `value' to unsigned int.
1925
1926 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
1927
1928         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1929         precision FP, mark it as such.  Likewise for double precision
1930         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
1931         possible.
1932
1933 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
1934
1935         * ppc-opc.c (extract_nsi): make unsigned expression signed before
1936         negating it.
1937         (UNUSED): remove one level of parens, so MSVC doesn't choke on
1938         nesting depth when all the macros are expanded.
1939
1940 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
1941
1942         * sparc-opc.c: The fcmp v9a instructions take an integer register
1943         as a destination, not a floating point register.  From Christian
1944         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1945
1946 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
1947
1948         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1949         syntax.  From Roman Hodek
1950         <rnhodek@faui22c.informatik.uni-erlangen.de>.
1951
1952         * i386-dis.c (twobyte_has_modrm): Fix pand.
1953
1954 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
1955
1956         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1957
1958 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
1959
1960         * arm-dis.c: Add prototypes for arm_decode_shift and
1961         print_insn_arm.
1962
1963 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
1964
1965         * mips-opc.c: Add r3900 insns.
1966
1967 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
1968
1969         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
1970         print delay slot instructions on the same line.  When using a PC
1971         relative load, add a comment with the value being loaded if it can
1972         be obtained.
1973
1974 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
1975
1976         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1977         to pushS/popS for segment regs and byte constant so that
1978         pushw/popw printed when in 16 bit data mode.
1979
1980         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1981         print cbtw, cwtd in 16 bit data mode.
1982         * i386-dis.c (putop): extra case W to support above.
1983
1984         * i386-dis.c (print_insn_x86): print addr32 prefix when given
1985         address size prefix in 16 bit address mode.
1986
1987 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
1988
1989         * sh-dis.c: Reindent.  Rename local variable fprintf to
1990         fprintf_fn.
1991
1992 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
1993
1994         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1995
1996 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
1997
1998         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1999           field membership.
2000         * mips16-opc.c (mip16_opcodes): same.
2001
2002 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2003
2004         * m68k-opc.c (moveb): Change $d to %d.
2005
2006 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2007
2008         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2009         (twobyte_has_modrm): Likewise.
2010         (grps): Likewise.
2011         (OP_MMX, OP_EM, OP_MS): New static functions.
2012
2013         * i386-dis.c: Revert patch of April 4.  The output now matches
2014         what gcc generates.
2015
2016 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2017
2018         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2019         of $simm16.
2020
2021 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2022
2023         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2024
2025 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2026
2027         * Makefile.in (install): Depend upon installdirs.
2028         (installdirs): New target.
2029
2030 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2031
2032         From Thomas Graichen <graichen@rzpd.de>:
2033         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2034         * configure: Rebuild.
2035
2036 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2037
2038         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2039         Delete string{,s}.h support.
2040
2041 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2042
2043         * cgen-asm.c (cgen_parse_operand_fn): New global.
2044         (cgen_parse_{{,un}signed_integer,address}): Update call to
2045         cgen_parse_operand_fn.
2046         (cgen_init_parse_operand): New function.
2047         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2048         from cgen_asm_init_parse.
2049         (m32r_cgen_assemble_insn): New operand `errmsg'.
2050         Delete call to as_bad, return error message to caller.
2051         (m32r_cgen_asm_hash_keywords): #if 0 out.
2052
2053 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2054
2055         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2056         not data register.
2057         [case 'J']: Fix typo in register name.
2058
2059 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2060
2061         * configure.in: Substitute SHLIB_LIBS.
2062         * configure: Rebuild.
2063         * Makefile.in (SHLIB_LIBS): New variable.
2064         ($(SHLIB)): Use $(SHLIB_LIBS).
2065
2066 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2067
2068         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2069
2070         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2071
2072         * disassemble.c (disassembler): Handle m32r.
2073
2074 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2075
2076         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2077         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2078         * Makefile.in (CFILES): Add them.
2079         (ALL_MACHINES): Add them.
2080         (dependencies): Regenerate.
2081         * configure.in (cgen_files): New variable.
2082         (bfd_m32r_arch): Add entry.
2083         * configure: Regenerate.
2084
2085 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2086
2087         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2088         * configure: Rebuild.
2089
2090         * Makefile.in: Rebuild dependencies.
2091
2092         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2093
2094         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2095         fdivp.
2096
2097 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2098
2099         * Branched binutils 2.8.
2100
2101 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2102
2103         * m10200-dis.c: Rename from mn10200-dis.c.
2104         * m10200-opc.c: Rename from mn10200-opc.c.
2105         * m10300-dis.c: Rename from mn10300-dis.c
2106         * m10300-opc.c: Rename from mn10300-opc.c.
2107         * Makefile.in: Update accordingly.
2108
2109         * mips16-opc.c: Add mul and dmul macros.
2110
2111 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2112
2113         * makefile.vms: Update CFLAGS, add clean target.
2114
2115 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2116
2117         * mips-opc.c: Add "wait".  From Ralf Baechle
2118         <ralf@gnu.ai.mit.edu>.
2119
2120         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2121         * configure, config.in: Rebuild.
2122         * sysdep.h: Include <stdlib.h> if it exists.
2123         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2124         <string.h>.
2125         * Makefile.in: Rebuild dependencies.
2126
2127 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2128
2129         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2130         Andrew Bray <andy@madhouse.demon.co.uk>.
2131
2132         * mips-opc.c: Add cast when setting mips_opcodes.
2133
2134 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2135
2136         * v850-dis.c (disassemble):  Fix sign extension problem.
2137         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2138         disassembly calculate branch offsets correctly.
2139
2140 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2141
2142         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2143
2144         * mips-opc.c: Add dctr and dctw.
2145
2146 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2147
2148         * d30v-dis.c (print_insn): Change the way signed constants
2149         are displayed.
2150
2151 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2152
2153         * Makefile.in (BFD_H): New variable.
2154         (HFILES): New variable.
2155         (CFILES): Add all C files.
2156         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2157         Delete old dependencies, and build new ones.
2158         * dep-in.sed: New file.
2159
2160 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2161
2162         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2163
2164 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2165
2166         * mn10200-opc.c: Change "trap" to "syscall".
2167         * mn10300-opc.c: Add new "syscall" instruction.
2168
2169 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2170
2171         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2172         mulul insns on the coldfire.
2173
2174 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2175
2176         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2177         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2178         (print_insn_little_arm): Likewise.
2179
2180 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2181
2182         Based on patches from H.J. Lu <hjl@lucon.org>:
2183         * i386-dis.c (fetch_data): Add prototype.
2184         * m68k-dis.c (fetch_data): Add prototype.
2185         (dummy_print_address): Add prototype.  Make static.
2186         * ppc-opc.c (valid_bo): Add prototype.
2187         * sparc-dis.c (build_hash_table): Add prototype.
2188         (is_delayed_branch, compute_arch_mask): Add prototypes.
2189         (print_insn_sparc): Make several local variables const.
2190         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2191         * sparc-opc.c (arg): Change name field to be const.
2192         (lookup_name, lookup_value): Add prototypes.  Change table and
2193         name parameters to be const.
2194         (sparc_encode_asi): Change name parameter to be const.
2195         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2196         (sparc_encode_sparclet_cpreg): Likewise.
2197         (sparc_decode_asi): Change return type to be const.
2198         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2199         (sparc_decode_sparclet_cpreg): Likewise.
2200
2201 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2202
2203         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2204         Solaris doesn't like the combined options, and the -f is
2205         unnecessary.
2206         (stamp-tshlink, install): Likewise.
2207
2208 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2209
2210         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2211         as relaxable.
2212
2213 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2214
2215         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2216
2217 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2218
2219         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2220         the mc68000.
2221
2222 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2223
2224         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2225
2226 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2227
2228         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2229
2230 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2231
2232         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2233
2234 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2235
2236         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2237         floatformat_to_double to make portable.
2238         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2239         precision float.
2240
2241 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2242
2243         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2244         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2245
2246 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2247
2248         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2249         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2250
2251 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2252
2253         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2254         (OFF_SL_BR_SCALED): ... to this, and added the flag
2255         TIC80_OPERAND_BASEREL to the flags word.
2256         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2257         OFF_SL_BR_SCALED.
2258
2259 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2260
2261         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2262         Change mips_opcodes from const array to a pointer,
2263         and change bfd_mips_num_opcodes from const int to int,
2264         so that we can increase the size of the mips opcodes table
2265         dynamically.
2266
2267 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2268
2269         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2270         store BITNUM values in the table in one's complement form
2271         to match behavior when assembler is given a raw numeric
2272         value for a BITNUM operand.
2273         * tic80-dis.c (print_operand_bitnum): Ditto.
2274
2275 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2276
2277         * d30v-opc.c: Removed references to FLAG_X.
2278
2279 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2280
2281         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2282
2283 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2284
2285         * Makefile.in: Added d30v object files.
2286         * configure: (bfd_d30v_arch) Rebuilt.
2287         * configure.in: (bfd_d30v_arch) Added new case.
2288         * d30v-dis.c: New file.
2289         * d30v-opc.c: New file.
2290         * disassemble.c (disassembler) Add entry for d30v.
2291
2292 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2293
2294         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2295         representations for the floating point BITNUM values.
2296
2297 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2298
2299         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2300         in the table in one's complement form, as they appear in the
2301         actual instruction.
2302         (tic80_symbol_to_value): Use macros to access predefined
2303         symbol fields.
2304         (tic80_value_to_symbol): Ditto.
2305         (tic80_next_predefined_symbol): New function.
2306         * tic80-dis.c (print_operand_bitnum): Remove code that did
2307         one's complement for BITNUM values.
2308
2309 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2310
2311         * makefile.vms: Remove 8 bit characters.  Update to latest
2312         gcc release.
2313
2314 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2315
2316         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2317
2318 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2319
2320         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2321         (IMM24_PCREL): Likewise.
2322
2323 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2324
2325         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2326         address for an extended PC relative instruction that is not a
2327         branch.
2328
2329 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2330
2331         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2332         bytes_per_line.
2333
2334 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2335
2336         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2337         (tic80_opcodes): Sort entries so that long immediate forms
2338         come after short immediate forms, making it easier for
2339         assembler to select the right one for a given operand.
2340
2341 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2342
2343         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2344         display_endian.
2345         (print_insn_mips16): Likewise.
2346
2347 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2348
2349         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2350         a symbol class that restricts translation to just that
2351         class (general register, condition code, etc).
2352
2353 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2354
2355         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2356         and REG_DEST_E for register operands that have to be
2357         an even numbered register.  Add REG_FPA for operands that
2358         are one of the floating point accumulator registers.
2359         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2360         (tic80_opcodes): Change entries that need even numbered
2361         register operands to use the new operand table entries.
2362         Add "or" entries that are identical to "or.tt" entries.
2363
2364 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2365
2366         * mips16-opc.c: Add new cases of exit instruction for
2367         disassembler.
2368         * mips-dis.c (print_mips16_insn_arg): Display floating point
2369         registers in operands of exit instruction.  Print `$' before
2370         register names in operands of entry and exit instructions.
2371
2372 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2373
2374         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2375         pairs for all predefined symbols recognized by the assembler.
2376         Also used by the disassembling routines.
2377         (tic80_symbol_to_value): New function.
2378         (tic80_value_to_symbol): New function.
2379         * tic80-dis.c (print_operand_control_register,
2380         print_operand_condition_code, print_operand_bitnum):
2381         Remove private tables and use tic80_value_to_symbol function.
2382
2383 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2384
2385         * d10v-dis.c (print_operand): Change address printing
2386         to correctly handle PC wrapping.  Fixes PR11490.
2387
2388 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2389
2390         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2391         branches relaxable.
2392
2393 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2394
2395         * mips-dis.c (print_insn_mips16): Set insn_info information.
2396         (print_mips16_insn_arg): Likewise.
2397
2398         * mips-dis.c (print_insn_mips16): Better handling of an extend
2399         opcode followed by an instruction which can not be extended.
2400
2401 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2402
2403         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2404         coldfire moveb instruction to not allow an address register as
2405         destination.  Although the documentation does not indicate that
2406         this is invalid, experiments uncovered unexpected behavior.
2407         Added a comment explaining the situation.  Thanks to Andreas
2408         Schwab for pointing this out to me.
2409
2410 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2411
2412         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2413         entries are presorted so that entries with the same mnemonic are
2414         adjacent to each other in the table.  Sort the entries for each
2415         instruction so that this is true.
2416
2417 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2418
2419         * m68k-dis.c: Include <libiberty.h>.
2420         (print_insn_m68k): Sort the opcode table on the most significant
2421         nibble of the opcode.
2422
2423 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2424
2425         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2426         "vsub", "vst", "xnor", and "xor" instructions.
2427         (V_a1): Renamed from V_a, msb of accumulator reg number.
2428         (V_a0): Add macro, lsb of accumulator reg number.
2429
2430 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2431
2432         * tic80-dis.c (print_insn_tic80): Broke excessively long
2433         function up into several smaller ones and arranged for
2434         the instruction printing function to be callable recursively
2435         to print vector instructions that have both a load and a
2436         math instruction packed into a single opcode.
2437         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2438         to explain why it comes after the other vector opcodes.
2439
2440 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2441
2442         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2443         move insns to handle immediate operands.
2444
2445 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2446
2447         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2448         fix operand mask in the "moveml" entries for the coldfire.
2449
2450 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2451
2452         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2453         New macros for building vector instruction opcodes.
2454         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2455         FMT_LI, which were unused.  The field is now a flags field.
2456         Remove some opcodes that are possible, but illegal, such
2457         as long immediate instructions with doubles for immediate
2458         values.  Add "vadd" and "vld" instructions.
2459
2460 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2461
2462         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2463         the order more logical.  Move the shift alias instructions ("rotl",
2464         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2465         interspersed with the regular sr.x and sl.x instructions.  Add
2466         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2467         "sub", "subu", "swcr", and "trap".
2468
2469 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2470
2471         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2472         (OFF_SL_PC): Renamed from OFF_SL.
2473         (OFF_SS_BR): New operand type for base relative operand.
2474         (OFF_SL_BR): New operand type for base relative operand.
2475         (REG_BASE): New operand type for base register operand.
2476         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2477         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2478         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2479         instructions.
2480         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2481         10 char field, padded with spaces on rhs, rather than a string
2482         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2483         than old TIC80_OPERAND_RELATIVE.  Add support for new
2484         TIC80_OPERAND_BASEREL flag bit.
2485
2486 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2487
2488         * tic80-dis.c (print_insn_tic80): Print floating point operands
2489         as floats.
2490         * tic80-opc.c (SPFI): Add single precision floating point
2491         immediate operand type.
2492         (ROTATE): Add rotate operand type for shifts.
2493         (ENDMASK): Add for shifts.
2494         (n): Macro for the 'n' bit.
2495         (i): Macro for the 'i' bit.
2496         (PD): Macro for the 'PD' field.
2497         (P2): Macro for the 'P2' field.
2498         (P1): Macro for the 'P1' field.
2499         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2500         "fcmp", and "fdiv".
2501
2502 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2503
2504         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2505         adding in current address for pc-relative operands.
2506
2507 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2508
2509         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2510         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2511         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2512         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2513         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2514         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2515         (REG_SCALED, LSI_SCALED): New operand types.
2516         (E): New macro for 'E' bit at bit 27.
2517         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2518         opcodes, including the various size flavors (b,h,w,d) for
2519         the direct load and store instructions.
2520
2521 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2522
2523         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2524         in an instruction.
2525         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2526         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2527         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2528         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2529         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2530         masks with "MASK_* & ~M_*" to get the M bit reset.
2531         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2532
2533 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2534
2535         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2536         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2537         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2538         form.
2539         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2540         CC, SICR, and LICR table entries.
2541         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2542         "bcnd", and "brcr" opcodes.
2543
2544 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2545
2546         * ppc-opc.c (powerpc_operands): Make comment match the
2547         actual fields (no shift field).
2548         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2549         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2550         partial implementation, work in progress.
2551         * tic80-opc.c (tic80_operands): Begin construction operands table.
2552         (tic80_opcodes): Continue populating opcodes table and start
2553         filling in the operand indices.
2554         (tic80_num_opcodes): Add this.
2555
2556 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2557
2558         * m68k-opc.c: Add #B case for moveq.
2559
2560 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2561
2562         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2563         before they are used.
2564
2565 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2566
2567         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2568         for "breakpoint" instruction.
2569
2570 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2571
2572         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2573         (dep): Use ALL_CFLAGS rather than CFLAGS.
2574
2575 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2576
2577         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2578         flag.
2579
2580 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2581
2582         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2583         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2584
2585 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2586
2587         * mips16-opc.c: Add "abs".
2588
2589 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2590
2591         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2592         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2593         (disassembler): Add bfd_arch_tic80 support to set disassemble
2594         to print_insn_tic80.
2595         * tic80-dis.c (print_insn_tic80): Add stub.
2596
2597 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2598
2599         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2600         * configure: Regenerate with autoconf.
2601         * tic80-dis.c: Add file.
2602         * tic80-opc.c: Add file.
2603
2604 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2605
2606         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2607
2608 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2609
2610         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2611         (mn10200_opcodes): Use it for some logicals and btst insns.
2612         Add "break" and "trap" instructions.
2613
2614         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2615
2616         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2617
2618 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2619
2620         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2621         relative load or add now depends upon whether the instruction is
2622         in a delay slot.
2623
2624 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2625
2626         * mn10200-dis.c: Finish writing disassembler.
2627         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2628         Fix mask for "jmp (an)".
2629
2630         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2631         handle endianness issues for mn10300.
2632
2633         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2634
2635 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2636
2637         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2638         instruction.  Fix opcode field for "movb (imm24),dn".
2639
2640         * mn10200-opc.c (mn10200_operands): Fix insertion position
2641         for DI operand.
2642
2643 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2644
2645         * mn10200-opc.c: Create mn10200 opcode table.
2646         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2647         but moving along nicely.
2648
2649 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2650
2651         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
2652
2653 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
2654
2655         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2656         specifiers for fmovem* instructions.
2657
2658 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2659
2660         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2661
2662 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
2663
2664         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2665         with dsrl.
2666
2667 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2668
2669         * mn10300-opc.c: Add some comments explaining the various
2670         operands and such.
2671
2672         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2673
2674 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2675
2676         * m68k-dis.c (print_insn_arg): Handle new < and > operand
2677         specifiers.
2678
2679         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2680         operand specifiers in fmovm* instructions.
2681
2682 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
2683
2684         * ppc-opc.c (insert_li): Give an error if the offset has the two
2685         least significant bits set.
2686
2687 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2688
2689         * mips-dis.c (print_insn_mips16): Separate the instruction from
2690         the arguments with a tab, not a space.
2691
2692 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
2693
2694         * mn10300-dis.c (disasemble): Finish conversion to '$' as
2695         register prefix.
2696
2697         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2698         mov am,(imm32,sp).
2699
2700 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
2701
2702         * configure: Rebuild with autoconf 2.12.
2703
2704         Add support for mips16 (16 bit MIPS implementation):
2705         * mips16-opc.c: New file.
2706         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2707         (mips16_reg_names): New static array.
2708         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2709         after seeing a 16 bit symbol.
2710         (print_insn_little_mips): Likewise.
2711         (print_insn_mips16): New static function.
2712         (print_mips16_insn_arg): New static function.
2713         * mips-opc.c: Add jalx instruction.
2714         * Makefile.in (mips16-opc.o): New target.
2715         * configure.in: Use mips16-opc.o for bfd_mips_arch.
2716         * configure: Rebuild.
2717
2718 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
2719
2720         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2721         operand specifiers in *save, *restore and movem* instructions.
2722
2723         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2724         the coldfire.
2725
2726         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2727         register operands for immediate arithmetic, not, neg, negx, and
2728         set according to condition instructions.
2729
2730         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2731         specifier of the effective-address operand in immediate forms of
2732         arithmetic instructions.  The specifier for the immediate operand
2733         notes how and where the constant will be stored.
2734
2735 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
2736
2737         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2738         opcode.
2739
2740         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2741         register prefix.
2742
2743         * mn10300-dis.c (disassemble): Prefix registers with '%'.
2744
2745 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
2746
2747         * mn10300-dis.c (disassemble): Handle register lists.
2748
2749         * mn10300-opc.c: Fix handling of register list operand for
2750         "call", "ret", and "rets" instructions.
2751
2752         * mn10300-dis.c (disassemble): Print PC-relative and memory
2753         addresses symbolically if possible.
2754         * mn10300-opc.c: Distinguish between absolute memory addresses,
2755         pc-relative offsets & random immediates.
2756
2757         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2758         in 7 byte insns.
2759         (disassemble): Handle SPLIT and EXTENDED operands.
2760
2761 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
2762
2763         * mn10300-dis.c: Rough cut at printing some operands.
2764
2765         * mn10300-dis.c: Start working on disassembler support.
2766         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2767
2768         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2769         list.
2770         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2771
2772 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2773
2774         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2775
2776 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
2777
2778         * mn10300-opc.c (mn10300_opcodes): Demand parens around
2779         register argument is calls and jmp instructions.
2780
2781 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
2782
2783         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2784         getx operand.  Fix opcode for mulqu imm,dn.
2785
2786 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
2787
2788         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2789         in MN10300_OPERAND_SPLIT operands for how many bits
2790         appear in the basic insn word.  Add IMM32_HIGH24,
2791         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2792         (mn10300_opcodes): Use new operands as needed.
2793
2794         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2795         for bset, bclr, btst instructions.
2796         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2797
2798         * mn10300-opc.c (mn10300_operands): Remove many redundant
2799         operands.  Update opcode table as appropriate.
2800         (IMM32): Add MN10300_OPERAND_SPLIT flag.
2801         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2802
2803 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
2804
2805         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2806         operands (for indexed load/stores).  Fix bitpos for DI
2807         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2808         few instructions that insert immediates/displacements in the
2809         middle of the instruction.  Add IMM8E for 8 bit immediate in
2810         the extended part of an instruction.
2811         (mn10300_operands): Use new opcodes as appropriate.
2812
2813 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2814
2815         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2816         sequential so the assembler never parallelizes it with
2817         other instructions.
2818
2819 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
2820
2821         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2822         a data/address register that appears in register field 0
2823         and register field 1.
2824         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2825
2826 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
2827
2828         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2829         standard disassembly.
2830
2831         * alpha-opc.c (alpha_operands): Rearrange flags slot.
2832         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2833         Recategorize PALcode instructions.
2834
2835 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
2836
2837         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2838
2839 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
2840
2841         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2842         there are no operand types.
2843
2844 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
2845
2846         * v850-opc.c (D9_RELAX): Renamed from D9, all references
2847         changed.
2848         (v850_operands): Make sure D22 immediately follows D9_RELAX.
2849
2850 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
2851
2852         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2853
2854 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
2855
2856         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2857         and sst.w instructions.
2858
2859         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2860         "bCC"instructions).
2861
2862 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2863
2864         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2865         and the arguments.
2866
2867 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
2868
2869         * ppc-opc.c (PPCPWR2): Define.
2870         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2871         it.
2872
2873 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
2874
2875         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2876         field for movhu instruction.
2877
2878         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2879         cast value to "long" not "signed long" to keep hpux10
2880         compiler quiet.
2881
2882 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
2883
2884         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2885         for mov (abs16),DN.
2886
2887         * mn10300-opc.c (FMT*): Remove definitions.
2888
2889         * mn10300-opc.c (mn10300_opcodes): Fix destination register
2890         for shift-by-register opcodes.
2891
2892         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2893         into [AD][MN][01] for encoding the position of the register
2894         in the opcode.
2895
2896 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
2897
2898         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2899         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2900
2901 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
2902
2903         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2904         Fix various typos.  Add "PAREN" operand.
2905         (MEM, MEM2): Define.
2906         (mn10300_opcodes): Surround all memory addresses with "PAREN"
2907         operands.  Fix several typos.
2908
2909         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2910         changes.
2911
2912 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
2913
2914         * mn10300-opc.c (FMT_XX): Renumber starting at one.
2915         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
2916         at this time.
2917         (mn10300_opcodes): Break opcode format out into its own field.
2918         Update many operand fields to deal with signed vs unsigned
2919         issues.  Fix one or two typos in the "mov" instruction
2920         opcode, mask and/or operand fields.
2921
2922 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2923
2924         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2925         m68851 wasn't reset.
2926
2927 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2928
2929         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2930         all opcodes.  Very rough cut at operands for all opcodes.
2931
2932         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2933         opcode table.
2934
2935 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
2936
2937         * mn10200-opc.c, mn10300-opc.c: New files.
2938         * mn10200-dis.c, mn10300-dis.c: New files.
2939         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2940         * disassemble.c: Break mn10x00 support into 10200 and 10300
2941         support.
2942         * configure.in: Likewise.
2943         * configure: Rebuilt.
2944
2945 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
2946
2947         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2948
2949 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
2950
2951         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2952         MN10x00 processors.
2953         * disassemble (ARCH_mn10x00): Define.
2954         (disassembler): Handle bfd_arch_mn10x00.
2955         * configure.in: Recognize bfd_mn10x00_arch.
2956         * configure: Rebuilt.
2957
2958 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
2959
2960         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
2961         accordingly.  Don't declare functions using op_rtn.
2962
2963 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
2964
2965         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
2966         params to be more standard.
2967         * (disassemble):  Print absolute addresses and symbolic names for
2968         branch and jump targets.
2969         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
2970         bit operands.
2971         * (v850_opcodes):  Add breakpoint insn.
2972
2973 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2974
2975         * m68k-opc.c: Move the fmovemx data register cases before the
2976         other cases, so that they get recognized before the data register
2977         does gets treated as a degenerate register list.
2978
2979 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
2980
2981         * mips-opc.c: Add a case for "div" and "divu" with two registers
2982         and a destination of $0.
2983
2984 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
2985
2986         * mips-dis.c (print_insn_arg): Add prototype.
2987         (_print_insn_mips): Ditto.
2988
2989 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
2990
2991         * mips-dis.c (print_insn_arg): Print condition code registers as
2992         $fccN.
2993
2994 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
2995
2996         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2997
2998 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
2999
3000         * v850-dis.c (disassemble): Make static.  Provide prototype.
3001
3002 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3003
3004         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3005         in range checks.
3006
3007 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3008
3009         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3010         ']' characters into the output stream.
3011         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3012         Add "memop" field to all opcodes (for the disassembler).
3013         Reorder opcodes so that "nop" comes before "mov" and "jr"
3014         comes before "jarl".
3015
3016         * v850-dis.c (print_insn_v850): Fix typo in last change.
3017
3018         * v850-dis.c (print_insn_v850): Properly handle disassembling
3019         a two byte insn at the end of a memory region when the memory
3020         region's size is only two byte aligned.
3021
3022         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3023
3024         * v850-dis.c (v850_reg_names): Define.
3025         (v850_sreg_names, v850_cc_names): Likewise.
3026         (disassemble): Very rough cut at printing operands (unformatted).
3027
3028         * v850-opc.c (BOP_MASK): Fix.
3029         (v850_opcodes): Fix mask for jarl and jr.
3030
3031         * v850-dis.c: New file.  Skeleton for disassembler support.
3032         * Makefile.in Remove v850 references, they're not needed here.
3033         * configure.in: Add v850-dis.o when building v850 toolchains.
3034         * configure: Rebuilt.
3035         * disassemble.c (disassembler): Call v850 disassembler.
3036
3037         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3038         (insert_d8_6, extract_d8_6): New functions.
3039         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3040         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3041         Add D8_6.
3042         (IF4A, IF4B): Use "D7" instead of "D7S".
3043         (IF4C, IF4D): Use "D8_7" instead of "D8".
3044         (IF4E, IF4F): New.  Use "D8_6".
3045         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3046         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3047
3048         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3049         (v850_operands): Change D16 to D16_15, use special insert/extract
3050         routines.  New new D16 that uses the generic insert/extract code.
3051         (IF7A, IF7B): Use D16_15.
3052         (IF7C, IF7D): New.  Use D16.
3053         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3054
3055         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3056         message.  Issue an error if the branch offset is odd.
3057
3058         * v850-opc.c: Add notes about needing special insert/extract
3059         for all the load/store insns, except "ld.b" and "st.b".
3060
3061         * v850-opc.c (insert_d22, extract_d22): New functions.
3062         (v850_operands): Use insert_d22 and extract_d22 for
3063         D22 operands.
3064         (insert_d9): Fix range check.
3065
3066 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3067
3068         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3069         and set bits field to D9 and D22 operands.
3070
3071 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3072
3073         * v850-opc.c (v850_operands): Define SR2 operand.
3074         (v850_opcodes): "ldsr" uses R1,SR2.
3075
3076         * v850-opc.c (v850_opcodes): Fix opcode specs for
3077         sld.w, sst.b, sst.h, sst.w, and nop.
3078
3079 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3080
3081         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3082         end of the opcode table.
3083
3084 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3085
3086         * d10v-opc.c (pre_defined_registers): Added register pairs,
3087         "r0-r1", "r2-r3", etc.
3088
3089 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3090
3091         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3092         Create I16U for an unsigned 16bit mmediate operand.
3093         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3094
3095         * v850-opc.c (v850_operands): Define EP operand.
3096         (IF4A, IF4B, IF4C, IF4D): Use EP.
3097
3098         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3099         with immediate operand, "movhi".  Tweak "ldsr".
3100
3101         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3102         correct.  Get sld.[bhw] and sst.[bhw] closer.
3103
3104         * v850-opc.c (v850_operands): "not" is a two byte insn
3105
3106         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3107
3108         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3109
3110         * v850-opc.c (two): Get order of words correct.
3111
3112         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3113
3114         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3115         register source and destination operands.
3116         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3117
3118         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3119         same thinko in "trap" opcode.
3120
3121         * v850-opc.c (v850_opcodes): Add initializer for size field
3122         on all opcodes.
3123
3124         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3125         Add D8 for 8-bit unsigned field in short load/store insns.
3126         (IF4A, IF4D): These both need two registers.
3127         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3128         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3129         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3130         for "ldsr" and "stsr".
3131         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3132         is unsigned.
3133
3134         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3135         short store word (sst.w).
3136
3137 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3138
3139         * v850-opc.c (v850_operands): Added insert and extract fields,
3140         pointers to functions that handle unusual operand encodings.
3141
3142 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3143
3144         * v850-opc.c (v850_opcodes): Enable "trap".
3145
3146         * v850-opc.c (v850_opcodes): Fix order of displacement
3147         and register for "set1", "clr1", "not1", and "tst1".
3148
3149 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3150
3151         * v850-opc.c (v850_operands): Add "B3" support.
3152         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3153         and "tst1".
3154
3155         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3156
3157         * v850-opc.c: Close unterminated comment.
3158
3159 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3160
3161         * v850-opc.c (v850_operands): Add flags field.
3162         (v850_opcodes): add move opcodes.
3163
3164 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3165
3166         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3167         * configure: (bfd_v850v_arch) Add new case.
3168         * configure.in: (bfd_v850_arch) Add new case.
3169         * v850-opc.c: New file.
3170
3171 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3172
3173         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3174
3175 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3176
3177         * d10v-opc.c: Add additional information to the opcode
3178         table to help determinine which instructions can be done
3179         in parallel.
3180
3181 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3182
3183         * mpw-make.sed: Update editing of include pathnames to be
3184         more general.
3185
3186 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3187
3188         * arm-opc.h: Added "bx" instruction definition.
3189
3190 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3191
3192         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3193
3194 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3195
3196         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3197
3198 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3199
3200         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3201
3202 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3203
3204         * makefile.vms: Update for alpha-opc changes.
3205
3206 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3207
3208         * i386-dis.c (print_insn_i386): Actually return the correct value.
3209         (ONE, OP_ONE): #ifdef out; not used.
3210
3211 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3212
3213         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3214         Changed subi operand type to treat 0 as 16.
3215
3216 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3217
3218         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3219         <rose@netcom.com>.
3220
3221 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3222
3223         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3224         memory transfer instructions. Add new format string entries %h and %s.
3225         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3226         formats %h and %s.
3227
3228 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3229
3230         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3231         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3232
3233 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3234
3235         * alpha-dis.c (print_insn_alpha_osf): Remove.
3236         (print_insn_alpha_vms): Remove.
3237         (print_insn_alpha): Make globally visible.  Chose the register
3238         names based on info->flavour.
3239         * disassemble.c: Always return print_insn_alpha for the alpha.
3240
3241 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3242
3243         * d10v-dis.c (dis_long): Handle unknown opcodes.
3244
3245 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3246
3247         * d10v-opc.c: Changes to support signed and unsigned numbers.
3248         All instructions with the same name that have long and short forms
3249         now end in ".l" or ".s".  Divs added.
3250         * d10v-dis.c: Changes to support signed and unsigned numbers.
3251
3252 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3253
3254         * d10v-dis.c: Change all functions to use info->print_address_func.
3255
3256 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3257
3258         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3259         move ccr/sr insns more strict so that the disassembler only
3260         selects them when the addressing mode is data register.
3261
3262 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3263         * d10v-opc.c (pre_defined_registers):  Declare.
3264         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3265         to pick a better name for the registers.
3266
3267 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3268
3269         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3270         operands for fexpand and fpmerge.  From Christian Kuehnke
3271         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3272
3273 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3274
3275         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3276         print routine.  Take new regnames and cpumask arguments.
3277         Kill the environment variable nonsense.
3278         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3279         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3280         * disassemble.c (disassembler): Test bfd flavour to pick
3281         between OSF and VMS routines.  Default to OSF.
3282
3283 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3284
3285         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3286         * configure: Rebuild.
3287         * Makefile.in (install): Use @INSTALL_SHLIB@.
3288
3289 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3290
3291         * configure: (bfd_d10v_arch) Add new case.
3292         * configure.in: (bfd_d10v_arch) Add new case.
3293         * d10v-dis.c: New file.
3294         * d10v-opc.c: New file.
3295         * disassemble.c (disassembler) Add entry for d10v.
3296
3297 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3298
3299         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3300         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3301
3302 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3303
3304         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3305         distinguish between variants of the instruction set.
3306         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3307         distinguish between variants of the instruction set.
3308
3309 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3310
3311         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3312         the 8086 instruction set.
3313         * i386-dis.c:  General cleanups.  Make most things static.  Add
3314         prototypes.  Get rid of static variables aflags and dflags.  Pass
3315         them as args (to almost everything).
3316
3317 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3318
3319         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3320
3321         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3322
3323         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3324         if the next arg is marked with SRC_IN_DST.  Gross.
3325
3326         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3327         we're looking for and find EXR.
3328
3329         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3330         if we're looking for KBIT and we don't find it.
3331
3332         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3333         for L_3 and L_2.
3334
3335         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3336         3bit immediate operands.
3337
3338 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3339
3340         * Released binutils 2.7.
3341
3342         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3343         <kkaempf@progis.ac-net.de>.
3344
3345 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3346
3347         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3348
3349 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3350
3351         * sparc-dis.c (print_insn_sparclite):  New routine to print
3352         sparclite instructions.
3353
3354 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3355
3356         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3357
3358 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3359
3360         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3361         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3362         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3363
3364 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3365
3366         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3367         Use autoconf-set values.
3368         (docdir, oldincludedir): Removed.
3369         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3370
3371 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3372
3373         * alpha-opc.c: New file.
3374         * alpha-opc.h: Remove.
3375         * alpha-dis.c: Complete rewrite to use new opcode table.
3376         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3377         * configure: Rebuild with autoconf 2.10.
3378         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3379         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3380         alpha-opc.h.
3381         (alpha-opc.o): New target.
3382
3383 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3384
3385         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3386         Set imm_added_to_rs1 even if the source and destination register
3387         are not the same.
3388
3389         * sparc-opc.c: Add some two operand forms of the wr instruction.
3390
3391 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3392
3393         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3394         to just "mode".
3395
3396         * disassemble.c (disassembler): Handle H8/S.
3397         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3398
3399 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3400
3401         * sparc-opc.c: Add beq/teq as aliases for be/te.
3402
3403         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3404         <sergei@msil.sps.mot.com>.
3405
3406 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3407
3408         * makefile.vms: New file.
3409
3410         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3411
3412 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3413
3414         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3415         regardless of plen.
3416
3417 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3418
3419         * i386-dis.c (OP_OFF): Call append_prefix.
3420
3421 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3422
3423         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3424         unsigned long to silence a warning from the Solaris PowerPC
3425         compiler.
3426
3427 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3428
3429         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3430
3431 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3432
3433         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3434         (X_IMM13): Delete.
3435         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3436         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3437         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3438         cpush, cpusha, cpull sparclet insns.
3439
3440 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3441
3442         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3443
3444 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3445
3446         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3447         Set F_FLOAT on other floating point instructions.
3448
3449 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3450
3451         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3452         registers.
3453         (powerpc_opcodes): Add 860/821 specific SPRs.
3454
3455 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3456
3457         * configure.in: Permit --enable-shared to specify a list of
3458         directories.  Set and substitute BFD_PICLIST.
3459         * configure: Rebuild.
3460         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3461         uses.  Set to @BFD_PICLIST@.
3462
3463 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3464
3465         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3466         not "abs", which may be needed for the absolute in something
3467         like btst #0,@10:8.  Print L_3 immediates separately from other
3468         immediates.  Change ABSMOV reference to ABS8MEM.
3469
3470 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3471
3472         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3473         (current_arch_mask): New static global.
3474         (compute_arch_mask): New static function.
3475         (print_insn_sparc): Delete sparc_v9_p.  New static local
3476         current_mach.  Resort opcode table if current_mach changes.
3477         Generalize "insn not supported" test.
3478         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3479         Delete test for v9/!v9.
3480         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3481         (v6notlet): Define.
3482         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3483         (brfcx): Renamed to FBRX.
3484         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3485         coprocessor mnemonics are not supported on the sparclet).
3486         (condf): Renamed to CONDF.
3487         (SLCBCC2): Delete F_ALIAS flag.
3488
3489 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3490
3491         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3492         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3493
3494 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3495
3496         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3497         that the shared library version number is set correctly.
3498
3499 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3500
3501         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3502         Miles Bader <miles@gnu.ai.mit.edu>.
3503         * configure: Rebuild.
3504
3505 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3506
3507         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3508         malloc.
3509
3510 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3511
3512         * configure: Rebuild with autoconf 2.8.
3513
3514 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3515
3516         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3517         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3518
3519 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3520
3521         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3522         since they appear as targets in Makefile.in.
3523         * configure: Rebuild.
3524
3525 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3526
3527         * mpw-make.sed: Edit out shared library support bits.
3528
3529 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3530
3531         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3532         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3533         (sparc_opcodes): Add sparclet insns.
3534         (sparclet_cpreg_table): New static local.
3535         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3536         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3537
3538 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3539
3540         * i386-dis.c (index16): New static variable.
3541         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3542         other way around.
3543         (OP_indirE): Return result of OP_E.
3544         (OP_E): Check for 16 bit addressing mode, and disassemble
3545         correctly.  Optimised 32 bit case a little.  Don't print
3546         "(base,index,scale)" when sib specifies only an offset.
3547
3548 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3549
3550         * configure.in: Set and substitute SHLIB_DEP.
3551         * configure: Rebuild.
3552         * Makefile.in (SHLIB_DEP): New variable.
3553         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3554         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3555         COMMON_SHLIB, add them to piclist with appropriate modifications.
3556         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3557         here: just use piclist.
3558
3559 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3560
3561         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3562         (print_insn_sparc): Rewrite v9/not-v9 tests.
3563         (compare_opcodes): Likewise.
3564         * sparc-opc.c (MASK_<ARCH>): Define.
3565         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3566         (sparclet,v6notv9): Define.
3567         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3568         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3569
3570 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3571
3572         * configure.in: Call AC_PROG_CC before configure.host.
3573         * configure: Rebuild.
3574
3575         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3576
3577 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3578
3579         * i386-dis.c (onebyte_has_modrm): New static array.
3580         (twobyte_has_modrm): New static array.
3581         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3582
3583 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3584
3585         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3586         $(SHLINK).
3587
3588 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3589
3590         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3591         doesn't conflict.
3592
3593 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3594
3595         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3596         m68010up, not just m68020up | cpu32.
3597
3598         * Makefile.in (SONAME): New variable.
3599         ($(SHLINK)): Make a link to the transformed name, as well.
3600         (stamp-tshlink): New target.
3601         (install): Skip stamp-tshlink during install.
3602
3603 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3604
3605         * configure.in: Call AC_ARG_PROGRAM.
3606         * configure: Rebuild.
3607         * Makefile.in (program_transform_name): New variable.
3608         (install): Transform library name before installing it.
3609
3610 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3611
3612         * i960-dis.c (mem): Add HX dcinva instruction.
3613
3614         Support for building as a shared library, based on patches from
3615         Alan Modra <alan@spri.levels.unisa.edu.au>:
3616         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3617         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3618         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3619         * configure: Rebuild.
3620         * Makefile.in (ALLLIBS): New variable.
3621         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3622         (COMMON_SHLIB, SHLINK): New variables.
3623         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3624         (STAGESTUFF): Remove variable.
3625         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3626         (stamp-piclist, piclist): New targets.
3627         ($(SHLIB), $(SHLINK)): New targets.
3628         ($(OFILES)): Depend upon stamp-picdir.
3629         (disassemble.o): Build twice if PICFLAG is set.
3630         (MOSTLYCLEAN): Add pic/*.o.
3631         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3632         (distclean): Remove pic and stamp-picdir.
3633         (install): Install shared libraries.
3634         (stamp-picdir): New target.
3635
3636 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3637
3638         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3639         Print unknown instruction as "unknown", rather than in hex.
3640
3641 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3642
3643         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3644
3645 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3646
3647         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3648
3649 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
3650
3651         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3652         when necessary.  From Ulrich Drepper
3653         <drepper@myware.rz.uni-karlsruhe.de>.
3654
3655 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3656
3657         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3658         sparc_num_opcodes.  Update architecture enum values.
3659         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3660         (sparc_opcode_lookup_arch): New function.
3661         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3662         (sparc_opcodes): Add v9a shutdown insn.
3663
3664 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
3665
3666         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3667         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
3668         architecture.
3669         (print_insn_sparc64): Deleted.
3670         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3671         print_insn_sparc.
3672
3673         * sparc-opc.c (architecture_pname): Add v9a.
3674
3675 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
3676
3677         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3678         incorrectly defined as 0x16 when it should be 0x15.
3679         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3680         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
3681         excb (exception barrier) which is defined in the Alpha
3682         Architecture Handbook version 2.
3683         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3684         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
3685         disassembled as or, for example.
3686
3687 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
3688
3689         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3690         (_print_insn_mips): Change i from int to unsigned int.
3691
3692 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
3693
3694         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3695         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
3696
3697 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
3698
3699         * i386-dis.c: Added Pentium Pro instructions.
3700
3701 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3702
3703         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3704         being for Power2.
3705
3706 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3707
3708         * sh-opc.h (sh_nibble_type): Added REG_B.
3709         (sh_arg_type): Added A_REG_B.
3710         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3711         and stc.l opcodes.
3712         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3713
3714 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3715
3716         * disassemble.c (disassembler): Use new bfd_big_endian macro.
3717
3718 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3719
3720         * Makefile.in (distclean): Remove stamp-h.  From Ronald
3721         F. Guilmette <rfg@monkeys.com>.
3722
3723 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
3724
3725         From David Mosberger-Tang  <davidm@azstarnet.com>:
3726         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3727         instruction.
3728
3729 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3730
3731         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3732         (sh_table): Added many SH3 opcodes.
3733         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3734
3735 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3736
3737         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3738         (subco,subco.): Mark this PPC, not PPCCOM.
3739
3740 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
3741
3742         * configure: Rebuild with autoconf 2.7.
3743
3744 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3745
3746         * configure: Rebuild with autoconf 2.6.
3747
3748 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
3749
3750         * configure.in: Sort list of architectures.  Accept but do nothing
3751         for alliant, convex, pyramid, romp, and tahoe.
3752
3753 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
3754
3755         * a29k-dis.c (print_special): Change num to unsigned int.
3756
3757 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
3758
3759         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3760         shifting it.
3761
3762 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3763
3764         * configure.in: Call AC_CHECK_PROG to find and cache AR.
3765         * configure: Rebuilt.
3766
3767 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
3768
3769         * configure.in: Add case for bfd_i860_arch.
3770         * configure: Rebuild.
3771
3772 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3773
3774         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3775         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3776         (NEXTDOUBLE): Likewise.
3777         (print_insn_m68k): Don't match fmoveml if there is more than one
3778         register in the list.
3779         (print_insn_arg): Handle a place of '8' for a type of 'L'.
3780
3781 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3782
3783         * m68k-opc.c: Use #W rather than #w.
3784         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3785
3786 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3787
3788         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3789         and likewise for all the dbxx opcodes.
3790
3791 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
3792
3793         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3794
3795 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
3796
3797         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3798         the VR4100 specific instructions to the mips_opcodes structure.
3799
3800 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
3801
3802         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3803         ugly Metrowerks bug in CW6, is fixed in CW7.
3804
3805 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3806
3807         * ppc-opc.c (whole file): Add flags for common/any support.
3808
3809 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
3810
3811         * Makefile.in (BISON): Remove macro.
3812         (FLAGS_TO_PASS): Remove BISON.
3813
3814 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
3815
3816         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3817
3818         * m68k-dis.c (print_insn_m68k): Recognize all two-word
3819         instructions that take no args by looking at the match mask.
3820         (print_insn_arg): Always print "%" before register names.
3821         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3822         [case '_']: Don't print "@#" before address.
3823         [case 'J']: Use "%s" as format string, not register name.
3824         [case 'B']: Treat place == 'C' like 'l' and 'L'.
3825
3826 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
3827
3828         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3829         name correctly.
3830
3831 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
3832
3833         From David Mosberger-Tang  <davidm@azstarnet.com>
3834
3835         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3836         (alpha_insn_set): added definitions for VAX floating point
3837         instructions (Unix compilers don't generate these, but handcoded
3838         assembly might still use them).
3839
3840         * alpha-dis.c (print_insn_alpha): added support for disassembling
3841         the miscellaneous instructions in the Alpha instruction set.
3842
3843 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
3844
3845         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3846         no longer create sysdep.h, sed ppc-opc.c to work around a
3847         serious Metrowerks C bug.
3848         * mpw-make.in: Remove.
3849         * mpw-make.sed: New file, used by mpw-configure to edit
3850         Makefile.in into an MPW makefile.
3851
3852 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
3853
3854         * Makefile.in (maintainer-clean): New synonym for realclean.
3855
3856 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3857
3858         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3859         which use '0', '1', and '2' instead.  Specify the proper size for
3860         a pmove immediate operand.  Correct the pmovefd patterns to be
3861         moves to a register, not from a register.
3862         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3863
3864 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
3865
3866         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3867         %psr, %wim, %tbr as F_NOTV9.
3868
3869 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
3870
3871         * Makefile.in (Makefile): Just rebuild Makefile when running
3872         config.status.
3873         (config.h, stamp-h): New targets.
3874         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3875         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
3876         rebuilding config.h.
3877         * configure: Rebuild.
3878
3879         * mips-opc.c: Change unaligned loads and stores with "t,A"
3880         operands to use "t,A(b)".
3881
3882 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3883
3884         * sh-dis.c (print_insn_shx): Add F_FR0 support.
3885
3886 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3887
3888         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3889         until 3 instead of until 2.
3890
3891 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3892
3893         * Makefile.in (ALL_CFLAGS): Define.
3894         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3895         (MOSTLYCLEAN): Add config.log.
3896         (distclean): Don't remove config.log.
3897         * configure.in: Substitute HDEFINES.
3898         * configure: Rebuild.
3899
3900 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3901
3902         * sh-opc.h (sh_arg_type): Add F_FR0.
3903         (sh_table, case fmac): Add F_FR0 as first argument.
3904
3905 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3906
3907         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3908
3909 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
3910
3911         * sparc-dis.c: Remove all references to NO_V9.
3912
3913 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
3914
3915         * aclocal.m4: Just include ../bfd/aclocal.m4.
3916         * configure: Rebuild.
3917
3918 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
3919
3920         * sparc-dis.c (X_DISP19): Define.
3921         (print_insn, case 'G'): Use it.
3922         (print_insn, case 'L'): Sign extend displacement.
3923
3924 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
3925
3926         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3927         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
3928         host_makefile_frag or frags.
3929         * aclocal.m4: New file.
3930         * configure: Rebuild.
3931         * Makefile.in (INSTALL): Set to @INSTALL@.
3932         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3933         (INSTALL_DATA): Set to @INSTALL_DATA@.
3934         (AR): Set to @AR@.
3935         (AR_FLAGS): Set to rc rather than qc.
3936         (CC): Define as @CC@.
3937         (CFLAGS): Set to @CFLAGS@.
3938         (@host_makefile_frag@): Remove.
3939         (config.status): Remove dependency upon @frags@.
3940
3941         * configure.in: ../bfd/config.bfd now just sets shell variables.
3942         Use them rather than looking through target Makefile fragments.
3943         * configure: Rebuild.
3944
3945 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3946
3947         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3948
3949 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
3950
3951         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3952         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3953         sparc64 insns.
3954
3955         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3956         (lookup_{name,value}): New functions.
3957         (prefetch_table): New static local.
3958         (sparc_{encode,decode}_prefetch): New functions.
3959         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3960
3961 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3962
3963         * sh-opc.h: Add blank lines to improve readabililty of sh3e
3964         instructions.
3965
3966 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3967
3968         * sh-dis.c: Correct comment on first line of file.
3969
3970 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
3971
3972         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3973
3974         * sparc-opc.c (asi, membar): New static locals.
3975         (sparc_{encode,decode}_{asi,membar}): New functions.
3976         (sparc_opcodes, membar insn): Fix.
3977         * sparc-dis.c (print_insn): Call sparc_decode_asi.
3978         Support decoding of membar masks.
3979         (X_MEMBAR): Define.
3980
3981 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
3982
3983         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3984
3985 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3986
3987         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3988         and likewise for the other branches.  Add bhs as an alias for bcc,
3989         and likewise for the size variants.  Add dbhs as an alias for
3990         dbcc.
3991
3992 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
3993
3994         * sh-opc.h (FP sts instructions): Update to match reality.
3995
3996 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
3997
3998         * m68k-dis.c: (fpcr_names): Add % before all register names.
3999         (reg_names): Likewise.
4000         (print_insn_arg): Don't explicitly print % before register names.
4001         Add % before register names in static array names.  In case 'r',
4002         print data registers as `@(Dn)', not `Dn@'.  When printing a
4003         memory address, don't print @# before it.
4004         (print_indexed): Change base_disp and outer_disp from int to
4005         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4006         syntax.  Sign extend 8 byte displacement correctly.
4007         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4008         Change parameter disp from int to bfd_vma.
4009
4010         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4011         for jsr.
4012
4013 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4014
4015         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4016         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4017         * sh-opc.h (sh_arg_type): Add new operand types.
4018         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4019
4020 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4021
4022         * Makefile.in (distclean): Remove generated file config.h.
4023
4024 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4025
4026         * Makefile.in (distclean): Remove generated file config.h.
4027
4028 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4029
4030         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4031         Clean up tables.
4032         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4033         (opcode): Remove.
4034         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4035         rather than numopcodes.  Use m68k_opcodes rather than removed
4036         opcode function.  Don't check F_ALIAS.
4037         (print_insn_arg): Change first parameter to be const char *.
4038         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4039         (m68k-opc.o): New target.
4040         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4041         * configure: Rebuild.
4042
4043 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4044
4045         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4046         (opcode_bits, opcode_hash_table): New variables.
4047         (opcodes_initialized): Renamed from opcodes_sorted.
4048         (build_hash_table): New function.
4049         (is_delayed_branch): Use hash table.
4050         (print_insn): Renamed from print_insn_sparc, made static.
4051         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4052         and vice-versa if sparc64.
4053         (print_insn_sparc, print_insn_sparc64): New functions.
4054         (compare_opcodes): Move sparc64 opcodes to end.
4055         Print commutative insns with constant second.
4056         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4057
4058 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4059
4060         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4061         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4062         avoids printing a delay slot in a delay slot.
4063         * sh-opc.h (sh_table): Fully bracket last entry.
4064
4065 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4066
4067         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4068
4069 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4070
4071         * configure.in: Get host_makefile_frag from ${srcdir}.
4072
4073         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4074         config.h from config.in.  Don't set up sysdep.h link.
4075         * sysdep.h: New file.
4076         * configure, config.in: New files, generated from configure.in.
4077         * Makefile.in: Updated to be processed autoconf-style.
4078         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4079         (Makefile): Depend on config.status.
4080         (config.status): New rule.
4081         * configure.bat: Update Makefile substitutions.
4082
4083 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4084
4085         * mips-opc.c (L1): Define.
4086         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4087         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4088         and wb.
4089
4090 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4091
4092         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4093         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4094         have multiple add units but only a single logical unit.
4095
4096         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4097         shifted by 18, without any insertion or extraction function.
4098         (insert_cr, extract_cr): Remove.
4099
4100 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4101
4102         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4103         register names.
4104
4105 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4106
4107         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4108         * sh-opc.h: Add copyright.
4109
4110 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4111
4112         * Makefile.in (crunch-m68k): Delete extra target accidentally
4113         checked in a while ago.
4114
4115 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4116
4117         * sh-opc.h (sh_table): Add SH3 support.
4118
4119 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4120
4121         * sh-opc.h: Added bsrf and braf.
4122
4123 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4124
4125         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4126         bogus [ls]fm{ea,fd} patterns.
4127
4128         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4129         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4130         initialize it from memory.  Make function static.
4131         (print_insn_{big,little}_arm): New functions.
4132         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4133         the correct endianness.
4134
4135 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4136
4137         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4138         enum list.
4139
4140 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4141
4142         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4143         17th, so that it builds again using GCC as the compiler.
4144
4145 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4146
4147         * mips-dis.c (print_insn_little_mips): Cast return value from
4148         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4149         expects an unsigned long, and that might be fewer words of
4150         argument storage (e.g., if bfd_vma is long long on a 32-bit
4151         machine).
4152         (print_insn_big_mips): Likewise with bfd_getb32 value.
4153         (_print_insn_mips): Now static.
4154
4155 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4156
4157         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4158         gcc memory hog problem with initializer is fixed.
4159
4160 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4161
4162         Merge in support for Mac MPW as a host.
4163         (Old change descriptions retained for informational value.)
4164
4165         * mpw-config.in (archname): Compute from the config.
4166         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4167
4168         * mpw-config.in (target_arch): Compute from canonical target.
4169         (m68k, mips, powerpc, sparc): Add architectures.
4170         * mpw-make.in (disassemble.c.o): Add.
4171         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4172
4173         * mpw-config.in (BFD_MACHINES): Set to a default value.
4174         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4175
4176         * mpw-make.in (CSEARCH): Add extra-include to search path.
4177
4178         * mpw-config.in (varargs.h): Don't create.
4179         (sysdep.h): Create using forward-include.
4180         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4181
4182         * mpw-config.in: New file, MPW version of configure.in.
4183         * mpw-make.in: New file, MPW version of Makefile.in.
4184
4185 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4186
4187         * alpha-dis.c (print_insn_alpha): Put empty statement after
4188         default label.
4189
4190 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4191
4192         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4193         (low_sign_extend): Likewise.
4194         (get_field): Delete unused function.
4195         (set_field, deposit_14, deposit_21): Likewise.
4196
4197 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4198
4199         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4200           (guy@netapp.com).
4201
4202 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4203
4204         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4205
4206         * alpha-opc.h (OSF_ASMCODE): define
4207         print pal-code names as defined in App C of the
4208         Alpha Architecture Reference Manual
4209
4210         * alpha-dis.c: cleaned up output
4211         print stylized code forms as defined in App A.4.3 of the
4212         Alpha Architecture Reference Manual
4213
4214 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4215
4216         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4217         `rfe'.
4218         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4219         'N', and 'M'.
4220
4221 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4222
4223         * m68k-dis.c (opcode): New function.  Returns address of opcode
4224         table entry given index, even if the opcode table was split to
4225         work around gcc bugs.
4226         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4227         directly.
4228         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4229         (reg_names): Now const.
4230         (print_insn_arg): Arrays cacheFieldName and names now const.
4231         (print_indexed): Array scales now const.
4232
4233 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4234
4235         * ppc-opc.c: Sort recently added instructions by minor opcode
4236         number within major opcode number.
4237
4238 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4239
4240         * hppa-dis.c: Include libhppa.h.
4241
4242 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4243
4244         * mips-opc.c: Change dli to use M_DLI, and add dla.
4245
4246 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4247
4248         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4249
4250 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4251
4252         * mips-opc.c: Add r4650 mul instruction.
4253
4254 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4255
4256         * mips-opc.c: Add uld and usd macros for unaligned double load and
4257         store.
4258
4259 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4260
4261         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4262         mfdcr, mtdcr, icbt, iccci.
4263
4264 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4265
4266         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4267         signed char fields to shorts, more portable.
4268
4269 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4270
4271         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4272         char fields as signed chars, since they may have negative values.
4273
4274 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4275
4276         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4277           (mycroft@netbsd.org).
4278
4279 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4280
4281         From "Logg, Ed" <elogg@ea.com>:
4282         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4283         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4284         value.
4285
4286 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4287
4288         * ppc-opc.c: Changes based on patch from David Edelsohn
4289         <edelsohn@mhpcc.edu>.
4290         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4291         SPR.
4292         (FXM_MASK): Define.
4293         (insert_tbr): New static function.
4294         (extract_tbr): New static function.
4295         (XFXFXM_MASK, XFXM): Define.
4296         (XSPRBAT_MASK, XSPRG_MASK): Define.
4297         (powerpc_opcodes): Add instructions to access special registers by
4298         name.  Add mtcr and mftbu.
4299
4300 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4301
4302         * mips-opc.c (P3): Define.
4303         (mips_opcodes): Add mad and madu.
4304
4305 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4306
4307         * configure.in: Add W65 support.
4308         * disassemble.c: Likewise.
4309         * w65-opc.h, w65-dis.c: New files.
4310
4311 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4312
4313         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4314         immediates.
4315
4316 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4317
4318         * mips-opc.c: Add dli as a synonym for li.
4319
4320 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4321
4322         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4323         print something for reserved opcode values, even if it won't
4324         assemble again.
4325
4326         * mips-dis.c (_print_insn_mips): When initializing, shift right
4327         and mask, to avoid sign extension problems on the Alpha.
4328
4329         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4330         control registers.
4331
4332 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4333
4334         * sh-opc.h (mov.l gbr): Get direction right.
4335         * sh-dis.c (print_insn_shx): New function.
4336         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4337         print opcodes with right byte order.
4338
4339 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4340
4341         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4342         to avoid conflicts with getopt.
4343
4344 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4345
4346         * hppa-dis.c (print_insn_hppa): Read the instruction using
4347         bfd_getb32, so that it works on a little endian or 64 bit host.
4348         Remove unused local variable op.
4349
4350 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4351
4352         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4353         addu does not work correctly if -mips3.
4354
4355 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4356
4357         * a29k-dis.c (print_special): Add special register names defined
4358         on 29030, 29040 and 29050.
4359         (print_insn): Handle new operand type 'I'.
4360
4361 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4362
4363         * Makefile.in (INSTALL): Use top level install.sh script.
4364
4365 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4366
4367         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4368         that it works on a little endian host.
4369
4370 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4371
4372         * configure.in: Use ${config_shell} when running config.bfd.
4373
4374 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4375
4376         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4377
4378 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4379
4380         * a29k-dis.c (print_insn): Print the opcode.
4381
4382 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4383
4384         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4385
4386 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4387
4388         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4389
4390 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4391
4392         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4393         which store a value into memory.
4394
4395 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4396
4397         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4398         * arm-dis.c, arm-opc.h: New files.
4399
4400 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4401
4402         * Makefile.in (ns32k-dis.o): Add dependency.
4403         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4404         string, not as array of chars.
4405
4406 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4407
4408         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4409
4410         * sparc-opc.c: Added sparclite extended FP operations, and
4411         versions of v9 impdep* instructions permitting specification of
4412         the OPF field.
4413
4414 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4415
4416         * i960-dis.c (reg_names): Now const.
4417         (struct sparse_tabent): New type, copied from array type in mem
4418         function.
4419         (ctrl): Local static array ctrl_tab now const.
4420         (cobr): Local static array cobr_tab now const.
4421         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4422         static variable mem_tab no longer explicitly initialized.  Changed
4423         mem_init to const array of struct sparse_tabent.
4424         (reg): Local static variable reg_tab no longer explicitly
4425         initialized.  Changed reg_init to const array of struct
4426         sparse_tabent.
4427         (ea): Local static array scale_tab now const.
4428
4429         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4430         (REG_MAX): Updated.
4431
4432 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4433
4434         * configure.bat: the disassember needs to be enabled for
4435         "objdump -d" to work in djgpp.
4436
4437 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4438
4439         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4440         (invalid_float): Enabled general version, doesn't require running
4441         on ns32k host.  Changed to take char* argument, and test for
4442         explicitly specified sizes, instead of using sizeof() on host CPU
4443         types.
4444         (INVALID_FLOAT): Cast first argument.
4445         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4446         list_P032, list_M032): Now const.
4447         (optlist, list_search): Made appropriate arguments now point to
4448         const.
4449         (print_insn_arg): Changed static array of one-character-string
4450         pointers into a static const array of characters; fixed sprintf
4451         statement accordingly.
4452
4453 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4454
4455         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4456         from distribution. A ns32k-dis.c from a previous distribution has
4457         been brought up to date and supports the new interface.
4458
4459         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4460
4461         * configure.in: add bfd_ns32k_arch target support.
4462
4463         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4464         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4465
4466 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4467
4468         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4469         disassembly right.
4470
4471 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4472
4473         * h8300-dis.c, mips-dis.c: Don't use true and false.
4474
4475 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4476
4477         * configure.in: Change --with-targets to --enable-targets.
4478
4479 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4480
4481         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4482         opcodes to the first instruction with that opcode, to speed
4483         disassembly of large files.  From ralphc@pyramid.com (Ralph
4484         Campbell).
4485
4486 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4487
4488         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4489
4490 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4491
4492         * configure.bat: update to latest makefile.in
4493
4494 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4495
4496         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4497         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4498         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4499         slot insn is in a delay slot.
4500         * z8k-opc.h: (resflg): Fix patterns.
4501         * h8500-opc.h Fix CR insn patterns.
4502
4503 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4504
4505         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4506         "cmpl" before POWER versions, so that gas -many uses them.
4507
4508 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4509
4510         * disassemble.c: New file.
4511         * Makefile.in (OFILES): Add disassemble.o.
4512         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4513         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4514         binutils/configure.in.
4515
4516         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4517         opcode being examined.
4518
4519 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4520
4521         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4522         (insert_ral, insert_ram, insert_ras): New functions.
4523         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4524         RAS for store with update.
4525
4526 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4527
4528         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4529         (edelsohn@npac.syr.edu).
4530
4531 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4532
4533         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4534         immediate argument.
4535
4536 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4537
4538         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4539
4540 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4541
4542         * ppc-opc.c (powerpc_operands): The signedp field has been
4543         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4544         instead.  Add new operand SISIGNOPT.
4545         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4546         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4547         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4548         than signedp field.
4549
4550 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4551
4552         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4553         is a reserved word for dynix cc.
4554
4555 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4556
4557         * configure.in: Change error message to refer to bfd/config.bfd
4558         rather than bfd/configure.in.
4559
4560 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4561
4562         * ppc-opc.c: Define POWER2 as short alias flag.
4563         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4564         fsqrt.
4565
4566 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4567
4568         * i960-dis.c (print_insn_i960): Don't read a second word for
4569         opcodes 0, 1, 2 and 3.
4570
4571 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4572
4573         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4574
4575 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4576
4577         * m68881-ext.c: Removed; no longer used.
4578         * Makefile.in: Changed accordingly.
4579
4580         * m68k-dis.c (ext_format_68881): Don't declare.
4581         (print_insn_m68k): If an instruction uses place 'i', it uses at
4582         least four fixed bytes.
4583         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4584         extended float, convert to double using floatformat_to_double, not
4585         ieee_extended_to_double, and fetch the data before converting it.
4586
4587 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4588
4589         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4590         davidj@ICSI.Berkeley.EDU (David Johnson).
4591
4592 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4593
4594         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4595         PowerPC uses bdnz[l][a].
4596
4597 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4598
4599         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4600
4601 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4602
4603         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4604
4605         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4606         by Motorola PowerPC 601 with PPC_OPCODE_601.
4607         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4608         Disassemble Motorola PowerPC 601 instructions as well as normal
4609         PowerPC instructions.
4610
4611 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4612
4613         * i960-dis.c (reg, mem): Just use a static array instead of
4614         calling xmalloc.
4615
4616 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4617
4618         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4619         condition name index if this is for a negated condition.
4620
4621         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4622         Floating point format for 'H' operand is backwards from normal
4623         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4624         operands (fmpyadd and fmpysub), handle bizarre register
4625         translation correctly for single precision format.
4626
4627         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4628         or 'I' operands if the next format specifier is 'M' (fcmp
4629         condition completer).
4630
4631 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4632
4633         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4634         single number giving a bitmask for the MB and ME fields of an M
4635         form instruction.  Change NB to accept 32, and turn it into 0;
4636         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4637         (insert_mbe, extract_mbe): New functions.
4638         (insert_nb, extract_nb): New functions.
4639         (SC_MASK): Mask out SA and LK bits.
4640         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4641         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4642         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4643         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4644         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4645         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4646         (powerpc_macros): Define table of macro definitions.
4647         (powerpc_num_macros): Define.
4648
4649         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4650         if PPC_OPERAND_NEXT is set.
4651
4652 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4653
4654         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4655         char.  Retrieve contents using bfd_getl32 instead of shifting.
4656
4657 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4658
4659         * ppc-opc.c: New file.  Opcode table for PowerPC, including
4660         opcodes for POWER (RS/6000).
4661         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
4662         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4663         (CFILES): Add ppc-dis.c.
4664         (ppc-dis.o, ppc-opc.o): New targets.
4665         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4666
4667 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4668
4669         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4670         No space before 'u', 'f', or 'N'.
4671
4672 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4673
4674         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4675         farther than we should.
4676
4677         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4678
4679 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4680
4681         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4682
4683 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4684
4685         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4686         needs it, to prevent reading past the end of a section.
4687
4688 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4689
4690         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4691         Removed t,A case for la; always use t,A(b) case.
4692
4693 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4694
4695         From Ted Lemen <mellon@pepper.ncd.com>
4696         * mips-dis.c (print_insn_arg): Handle 'k'.
4697         * mips-opc.c: Make cache use k, not t.
4698
4699 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4700
4701         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
4702         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4703         FLOAT_FORMAT_CODE to put out floating point register names.
4704
4705 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4706
4707         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4708
4709 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4710
4711         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4712
4713 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4714
4715         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4716         larger than 32.  Moved dsxx32 variants first for disassembler.
4717
4718 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4719
4720         * z8kgen.c, z8k-opc.h: Add full lda information.
4721
4722 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
4723
4724         * hppa-dis.c (print_insn_hppa): Do not emit a space after
4725         movb instructions.  Any necessary space will be emitted by
4726         the code to handle nullification completers.
4727
4728 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4729
4730         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4731
4732 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4733
4734         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
4735         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
4736
4737 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4738
4739         * mips-opc.c: Correct lwu opcode value (book had it wrong).
4740
4741 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4742
4743         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4744         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4745
4746 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
4747
4748         * m88k-dis.c (m88kdis): comment change.  Remove space after
4749           printing mnemonic.
4750           (printop): handle new arg types DEC and XREG for m88110.
4751
4752 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
4753
4754         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4755         type for absolute branch addresses.  Delete special
4756         "ble" and "be" code in 'W' operand code.
4757
4758 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4759
4760         * mips-opc.c: Set hazard information correctly for branch
4761         likely instructions.
4762
4763 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4764
4765         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
4766         info->fprintf_func for printing and info->print_address_func for
4767         address output.
4768
4769 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4770
4771         * mips-opc.c: Set INSN_TRAP for tXX instructions.
4772
4773 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4774
4775         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4776         Corrected second case of "b" for disassembler.
4777
4778 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4779
4780         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
4781         to BFD swapping routines to correspond to BFD name changes.
4782
4783 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4784
4785         * mips-opc.c: Change div machine instruction to be z,s,t rather
4786         than s,t.  Change div macro to be d,v,t rather than d,s,t.
4787         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
4788         rem and remu which generates only the corresponding div
4789         instruction.  This is for compatibility with the MIPS assembler,
4790         which only generates the simple machine instruction when an
4791         explicit destination of $0 is used.
4792         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4793
4794 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4795
4796         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4797         WR_31 hazard for bal, bgezal, bltzal.
4798
4799 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4800
4801         * hppa-dis.c (print_insn_hppa): Use print function
4802         from within the disassemble_info, not fprintf_filtered.
4803
4804 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4805
4806         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
4807         Law, law@cs.utah.edu.)
4808
4809 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4810
4811         * mips-opc.c ("absu"): Removed.
4812         ("dabs"): Added.
4813
4814 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4815
4816         * mips-opc.c: Added r6000 and r4000 instructions and macros.
4817         Changed hazard information to distinguish between memory load
4818         delays and coprocessor load delays.
4819
4820 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4821
4822         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
4823
4824 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4825
4826         * configure.in: Don't pass cpu to config.bfd.
4827
4828 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4829
4830         * m88k-dis.c (m88kdis): Make class unsigned.
4831
4832 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
4833
4834         * alpha-dis.c (print_insn_alpha): One branch format case was
4835         missing the instruction name.
4836
4837 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4838
4839         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4840         Add the arch-specific auxiliary files.
4841         (OFILES): Remove the arch-specific auxiliary files
4842         and use BFD_MACHINES instead of DIS_LIBS.
4843         * configure.in: Set BFD_MACHINES based on --with-targets option.
4844
4845 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4846
4847         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
4848         for swc1.
4849
4850 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4851
4852         * sparc-opc.c: Change CONST to const to deal with gcc
4853         -Dconst=__const -traditional.
4854
4855 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4856
4857         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4858         coprocessor instructions out of #if 0, and made them use new
4859         argument type "C".
4860
4861 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4862
4863         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4864
4865 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
4866
4867         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4868         instruction, for use by the disassembler.
4869
4870         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
4871         hand-coded sign extensions that depended on 32-bit host ints.
4872         FIXME, we still depend on big-endian host bitfield ordering.
4873         (sparc_print_insn):  Set the insn_info_valid field, and the
4874         other fields that describe the instruction being printed.
4875
4876 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
4877
4878         * sparc-opc.c (call): Accept all 6 addressing modes valid for
4879         `jmp' instead of just one of them.
4880
4881 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4882
4883         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4884         (fput_fp_reg_r): Renamed from fput_reg_r.
4885         (fput_fp_reg): New function.
4886         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4887
4888         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4889
4890         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4891
4892 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4893
4894         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4895
4896         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4897         don't output a space.
4898
4899         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4900
4901 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
4902
4903         * mips-opc.c: New file, containing opcode table from
4904         ../include/opcode/mips.h.
4905         * Makefile.in: Add it.
4906
4907 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4908
4909         * m88k-dis.c: New file, moved in from gdb and changed to use the
4910         new dis-asm.h disassembler interface.
4911         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4912         (m88k-dis.o): New target.
4913
4914 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
4915
4916         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4917         argument string const char * to correspond to opcode/mips.h.
4918
4919 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
4920
4921         * mips-dis.c: Updated to account for name changes in new version
4922         of opcode/mips.h.
4923         * Makefile.in: Added header file dependencies.
4924
4925 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
4926
4927         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4928
4929 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4930
4931         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4932         extend, rather than shifts.
4933
4934 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
4935
4936         * Makefile.in: Undo 15 June change.
4937
4938 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
4939
4940         * m68k-dis.c (print_insn_arg):  Change return value to byte count
4941         or error code.
4942         * m68k-dis.c:  Re-write to detect invalid operands before
4943         printing anything, so we can handle this the same way we
4944         handle invalid opcodes.
4945
4946 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4947
4948         * sh-dis.c, sh-opc.h: Understand some more opcodes.
4949
4950 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
4951
4952         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4953         header files.
4954
4955 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4956
4957         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4958
4959         * configure.in: Do make sysdep.h link.
4960         * Makefile.in: Search ../include.  Don't search ../bfd.
4961
4962 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
4963
4964         Changes from Jeff Law, law@cs.utah.edu:
4965         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
4966         Do not print a space before the completers specified by
4967         'a' and 'd'.
4968
4969 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
4970
4971         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4972         defined, since gdb has been fixed.
4973
4974         Changes from Jeff Law, law@cs.utah.edu:
4975         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4976         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4977         be a *disassemble_info, not a *FILE.
4978         * hppa-dis.c: Support 'd', '!', and 'a'.
4979         * hppa-dis.c: Support 's' to extract a 2 bit space register.
4980         * hppa-dis.c: Delete cases which are no longer needed.
4981
4982 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
4983
4984         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4985
4986 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4987
4988         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4989         H8/300-H opcodes.
4990
4991 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
4992
4993         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4994         * configure.in:  No longer need to configure to get sysdep.h.
4995
4996 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
4997
4998         * Patches from Jeffrey Law <law@cs.utah.edu>.
4999         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5000         templates for 1.1 FP computational instructions.
5001
5002 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5003
5004         * h8500-dis.c (print_insn_h8500): Address argument is type
5005         bfd_vma.
5006         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5007         Ditto.
5008
5009         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5010         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5011
5012         * sparc-dis.c (compare_opcodes): Move static declaration to
5013         top-level.
5014
5015 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5016
5017         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5018         instruction, remove unimp hack from 'l' argument.
5019
5020 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5021
5022         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5023         happy.
5024
5025 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5026
5027         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5028         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5029         instructions.
5030
5031 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5032
5033         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5034         arrays of string pointers to 2-d arrays of chars, to save
5035         space.
5036
5037 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5038
5039         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5040         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5041
5042 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5043
5044         * hppa-dis.c: New file from Utah, adapted to new disassembler
5045         calling interface.
5046         * Makefile.in: Include it.
5047
5048 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5049
5050         * sh-dis.c, sh-opc.h: New files.
5051
5052 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5053
5054         * alpha-dis.c, alpha-opc.h: New files.
5055
5056 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5057
5058         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5059         value.
5060
5061 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5062
5063         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5064
5065 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5066
5067         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5068         const.
5069
5070 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5071
5072         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5073         and double percent signs a few places.
5074
5075         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5076
5077         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5078         Use info->print_address_func not print_address.
5079
5080         * dis-buf.c (generic_print_address): New function.
5081
5082 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5083
5084         * Makefile.in: Add sparc-dis.c.
5085         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5086         From GDB:
5087             Add `add' instruction to the set that get checked
5088             for a preceding `sethi' in order to print an absolute address.
5089             * (print_insn):  Disassembly prefers real instructions.
5090             (is_delayed_branch):  Speed up.
5091             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5092             Still missing some float ops, and needs testing.
5093             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5094             F_ALIAS.  Use printf, not fprintf, when not passing a file
5095             pointer...
5096             (compare_opcodes): Check that identical instructions have
5097             identical opcodes, complain otherwise.
5098         From binutils:
5099             * New 'm' arg.
5100             * Include reg_names.
5101         From neither:
5102             Use dis-asm.h/read_memory_func interface.
5103
5104 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5105
5106         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5107           deliberately return non-zero to setjmp from longjmp.  Otherwise
5108           this code fails to compile.
5109
5110 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5111
5112         * m68k-dis.c:  Fix prototype for fetch_arg().
5113
5114 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5115
5116         * dis-buf.c: New file, for new read_memory_func interface.
5117         Makefile.in (OFILES): Include it.
5118         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5119         Use new read_memory_func interface.
5120
5121 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5122
5123         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5124         * h8500-opc.h: Fix couple of opcodes.
5125
5126 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5127
5128         * Makefile.in: add dvi & installcheck targets
5129
5130 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5131
5132         * Makefile.in:  Update for h8500-dis.c.
5133
5134 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5135
5136         * h8500-dis.c, h8500-opc.h: New files
5137
5138 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5139
5140         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5141         ../include/dis-asm.h.
5142         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5143         and ../gdb/m68k-pinsn.c).
5144         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5145         and ../gdb/i386-pinsn.c).
5146         * m68881-ext.c:  New file.  Moved definition of
5147         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5148         * Makefile.in:  Adjust for new files.
5149         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5150         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5151         can be dis-assembled.
5152
5153 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5154
5155         * mips-dis.c (print_insn_arg): Now returns void.
5156
5157 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5158
5159         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5160         files that use the macros.
5161
5162 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5163
5164         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5165         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5166         (CFILES): Added mips-dis.c.
5167
5168 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5169
5170         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5171         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5172
5173 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5174
5175         * Makefile.in:  Improve *clean rules.
5176         * configure.in:  Allow a default host.
5177
5178 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5179
5180         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5181         files include other sysdep files
5182
5183 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5184
5185         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5186
5187 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5188
5189         * configure.in:  For host support, use ../bfd/configure.host
5190         so it stays in sync with the ../bfd/hosts database.
5191
5192 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5193
5194         * configure.in: use cpu-vendor-os triple instead of nested cases
5195
5196 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5197
5198         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5199         *always* the wrong one.
5200
5201 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5202
5203         * z8kgen.c: added copyright info
5204
5205 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5206
5207         * z8k-dis.c (unparse_instr): prettier tabs
5208         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5209
5210 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5211
5212         * configure.in:  Add ncr* configuration.
5213         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5214         picayune ANSI compilers happy.
5215
5216 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5217
5218         * configure.in (i386):  Make i386 and i486 synonymous for now.
5219         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5220
5221 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5222
5223         * Makefile.in (install): Fix typo.
5224
5225 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5226
5227         * Makefile.in (make):  Remove obsolete crud.
5228         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5229
5230 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5231
5232         * Makefile.in: since there are no SUBDIRS, remove rule and
5233         references of subdir_do.
5234
5235 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5236
5237         * Makefile.in (install): Get the library name right here too.
5238         Don't install bfd.h, since it's unrelated to this library.  No
5239         subdirs to recurse into, either.
5240         (CFILES): The source file has a .c suffix, not .o.
5241
5242         * sparc-opc.c: New file, moved from BFD.
5243         * Makefile.in (OFILES): Build it.
5244
5245 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5246
5247         * z8k-dis.c: fixed forward refferences of some declarations.
5248
5249 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5250
5251         * Makefile.in: get the name of the library right
5252
5253 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5254
5255         * z8k-dis.c: knows how to disassemble z8k stuff
5256         * z8k-opc.h: new file full of z8000 opcodes
5257
5258 \f
5259 Local Variables:
5260 version-control: never
5261 End: