1 1999-09-04 Steve Chamberlain <sac@pobox.com>
5 * disassemble.c (disassembler): Handle bfd_arch_pj.
6 * configure.in: Handle bfd_pj_arch.
7 * Makefile.am: Rebuild dependencies.
8 (CFILES): Add pj-dis.c and pj-opc.c.
9 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
10 * configure, Makefile.in: Rebuild.
12 1999-09-04 H.J. Lu <hjl@gnu.org>
14 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
16 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
18 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
20 1999-08-04 Doug Evans <devans@casey.cygnus.com>
22 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
23 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
24 * m32r-opinst.c: Rebuild.
26 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
28 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
31 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
33 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
34 extract_10U_store): New.
35 (print_insn_hppa): Add new completers.
37 * hppa-dis.c (signed_unsigned_names,mix_half_names,
38 saturation_names): New.
39 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
41 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
43 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
45 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
46 to decide to print a space.
48 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
50 * i386-dis.c: Add AMD athlon instruction support.
52 1999-08-10 Ian Lance Taylor <ian@zembu.com>
54 From Wally Iimura <iimura@microunity.com>:
55 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
56 overflow at end of address space.
57 (generic_print_address): Use sprintf_vma.
59 1999-08-08 Ian Lance Taylor <ian@zembu.com>
61 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
62 MKDEP. Rebuild dependencies.
63 * Makefile.in: Rebuild.
65 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
67 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
68 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
69 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
70 (print_insn_hppa): Add 64 bit condition completers.
72 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
74 * hppa-dis.c (print_insn_hppa): Change condition args to use
77 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
79 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
82 1999-07-21 Ian Lance Taylor <ian@zembu.com>
85 * configure.bat: Remove; obsolete.
87 1999-07-11 Ian Lance Taylor <ian@zembu.com>
89 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
90 (generic_strcat_address): Add cast to avoid warning.
91 * i386-dis.c: Initialize all structure fields to avoid warnings.
92 Add ATTRIBUTE_UNUSED as appropriate.
94 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
96 * sparc-dis.c (print_insn_sparc): Differentiate between
97 addition and oring when guessing symbol for comment.
99 1999-07-05 Nick Clifton <nickc@cygnus.com>
101 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
104 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
106 * i386-dis.c: Mention intel mode specials in macro char comment.
108 1999-06-21 Ian Lance Taylor <ian@zembu.com>
110 * alpha-dis.c: Don't include <stdlib.h>.
111 * arm-dis.c: Include "sysdep.h".
112 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
114 * Makefile.am: Rebuild dependencies.
115 * Makefile.in: Rebuild.
117 1999-06-16 Nick Clifton <nickc@cygnus.com>
119 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
122 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
124 * arm-dis.c (arm_regnames): Turn into a pointer to a register
126 (arm_regnames_standard): New variable: Array of ARM register
127 names according to ARM instruction set nomenclature.
128 (arm_regnames_apcs): New variable: Array of ARM register names
129 according to ARM Procedure Call Standard.
130 (arm_regnames_raw): New variable: Array of ARM register names
131 using just 'r' and the register number.
132 (arm_toggle_regnames): New function: Toggle the chosen register set
134 (parse_disassembler_options): New function: Parse any target
135 disassembler command line options.
136 (print_insn_big_arm): Call parse_disassembler_options if any
138 (print_insn_little_arm): Call parse_disassembler_options if any
141 1999-06-13 Ian Lance Taylor <ian@zembu.com>
143 * i386-dis.c (FWAIT_OPCODE): Define.
144 (used_prefixes): New static variable.
145 (fetch_data): Don't print an error message if we have already
146 fetched some bytes successfully.
147 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
148 (prefix_name): New static function.
149 (print_insn_i386): If setjmp fails, indicating a data error, but
150 we have managed to fetch some bytes, print the first one as a
151 prefix or a .byte pseudo-op. If fwait is followed by a non
152 floating point instruction, print the first prefix. Set
153 used_prefixes when prefixes are used. If any prefixes were not
154 used after disassembling the instruction, print the first prefix
155 instead of printing the instruction.
156 (putop): Set used_prefixes when prefixes are used.
157 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
158 (OP_DIR, OP_SIMD_Suffix): Likewise.
160 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
162 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
163 Support signx %reg, clruw %reg.
165 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
167 * sparc-opc.c: Add aliases Solaris as supports.
169 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
171 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
172 * Makefile.in: Regenerated.
174 1999-06-03 Philip Blundell <philb@gnu.org>
176 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
177 when target is PC-relative.
179 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
181 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
184 * m68k-dis.c (fetch_arg): Add places `n', `o'.
186 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
187 Add mcf5206e to appropriate instructions.
188 Add alias for MAC, MSAC.
190 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
193 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
194 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
196 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
198 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
200 * i386-dis.c (Ed): Define.
201 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
203 (OP_rm): Rename to OP_Rd.
206 (putop): Add const to template and p.
207 (print_insn_x86): Delete.
208 (print_insn_i386): Merge old function print_insn_x86. Add const
210 (struct dis386): Add const to name.
211 (dis386_att, dis386_intel): Add const.
212 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
213 (names32, names16, names8, names_seg, index16): Add const.
214 (grps, prefix_user_table, float_reg): Add const.
215 (float_mem_att, float_mem_intel): Add const.
216 (oappend): Add const to s.
217 (OP_REG): Add const to s.
218 (ptr_reg): Add const to s.
219 (dofloat): Add const to dp.
220 (OP_C): Don't skip modrm, it's now done in OP_Rd.
223 (OP_Rd): Check for valid mod. Call Op_E to print.
224 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
225 (OP_MS): Check for valid mod. Call Op_EM to print.
226 (OP_3DNowSuffix): Set obufp and use oappend rather than
227 strcat. Call BadOp() for errors.
228 (OP_SIMD_Suffix): Likewise.
229 (BadOp): New function.
231 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
233 * i386-dis.c (dis386_intel): Remove macro chars, except for
234 jEcxz. Change cWtR and cRtd to cW and cR.
235 (dis386_twobyte_intel): Remove macro chars here too.
236 (putop): Handle R and W macros for intel mode.
238 * i386-dis.c (SIMD_Fixup): New function.
239 (dis386_twobyte_att): Use it on movlps and movhps, and change
240 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
241 (dis386_twobyte_intel): Same here.
243 * i386-dis.c (Av): Remove.
247 (OP_SIMD_Suffix): New function.
248 (OP_DIR): Remove dead code.
249 (eAX_reg..eDI_reg): Renumber.
250 (onebyte_has_modrm): Table numbering comments.
251 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
252 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
253 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
254 and handle SIMD cmp insns in OP_SIMD_Suffix.
255 (info->bytes_per_line): Bump from 5 to 6.
257 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
258 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
260 PIII SIMD support from Doug Ledford <dledford@redhat.com>
261 * i386-dis.c (XM, EX, None): Define.
262 (OP_XMM, OP_EX, OP_None): New functions.
263 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
264 (GRP14): Rename to GRPAMD.
265 (GRP*): Add USE_GROUPS flag.
267 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
268 (twobyte_has_modrm): Add SIMD entries.
269 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
270 (grps): Add SIMD insns.
271 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
272 oappend repz if uses_f3_prefix. Add code to handle new groups for
275 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
276 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
277 operand from Av to Jv.
279 1999-05-07 Nick Clifton <nickc@cygnus.com>
281 * mcore-dis.c (print_insn_mcore): Use .short to display
282 unidentified instructions, not .word.
284 1999-04-26 Tom Tromey <tromey@cygnus.com>
286 * aclocal.m4, configure: Updated for new version of libtool.
288 1999-04-14 Doug Evans <devans@casey.cygnus.com>
290 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
291 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
293 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
295 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
298 1999-04-10 Doug Evans <devans@casey.cygnus.com>
300 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
301 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
303 1999-04-06 Ian Lance Taylor <ian@zembu.com>
305 * opintl.h (LC_MESSAGES): Never define.
307 1999-04-04 Ian Lance Taylor <ian@zembu.com>
309 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
310 (separator_char, scale_char): Likewise.
311 (print_insn_x86): Likewise.
312 (print_insn_i386): Likewise. Add declaration.
314 1999-03-26 Doug Evans <devans@casey.cygnus.com>
316 * fr30-dis.c: Rebuild.
317 * m32r-dis.c: Rebuild.
319 1999-03-23 Ian Lance Taylor <ian@zembu.com>
321 * m68k-opc.c: Change compare instructions to use "@s" rather than
322 ";s" when used with an immediate operand.
324 1999-03-22 Doug Evans <devans@casey.cygnus.com>
326 * cgen-opc.c (cgen_set_cpu): Delete.
327 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
328 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
330 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
332 * po/opcodes.pot: Rebuild.
334 1999-03-16 Martin Hunt <hunt@cygnus.com>
336 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
338 1999-03-11 Doug Evans <devans@casey.cygnus.com>
340 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
341 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
342 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
343 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
344 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
345 * m32r-opinst.c: Rebuild.
347 1999-02-25 Doug Evans <devans@casey.cygnus.com>
349 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
350 (cgen_hw_lookup_by_num): Rewrite.
351 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
352 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
353 * m32r-opinst.c: Rebuild.
355 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
357 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
358 (insert_jhint): Fix insertion mask.
359 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
361 1999-02-10 Doug Evans <devans@casey.cygnus.com>
363 * Makefile.in: Rebuild.
365 1999-02-09 Doug Evans <devans@casey.cygnus.com>
367 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
368 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
369 * Makefile.am: Remove references to them.
370 (HFILES): Add fr30-desc.h,m32r-desc.h.
371 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
373 (ALL_MACHINES): Update.
374 * configure.in: Redo handling of cgen_files.
375 (bfd_i960_arch): Delete i960c-*.lo files.
376 * configure: Regenerate.
377 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
378 (hash_insn_array): Rewrite.
379 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
380 (hash_insn_array): Rewrite.
381 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
382 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
383 (cgen_lookup_get_insn_operands): Ditto.
384 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
385 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
386 * po/POTFILES.in: Rebuild.
387 * po/opcodes.pot: Rebuild.
389 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
391 * Makefile.am: Rebuild dependencies.
392 (HFILES): Add fr30-opc.h.
393 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
394 * Makefile.in: Rebuild.
396 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
397 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
399 * acconfig.h: Remove.
400 * configure: Rebuild with current autoconf/automake.
401 * aclocal.m4: Likewise.
402 * config.in: Likewise.
403 * Makefile.in: Likewise.
405 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
407 * m68k-opc.c: Correct move (not movew) to status word on 5200.
409 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
411 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
412 * i386-dis.c (x_mode): Define.
416 (dis386_twobyte): Remove.
417 (dis386_twobyte_att): New.
418 (dis386_twobyte_intel): New.
419 (print_insn_x86): Use new arrays.
421 (float_mem_intel): New.
422 (float_mem_att): New.
423 (dofloat): Use new float_mem arrays.
424 (print_insn_i386_att): New.
425 (print_insn_i386_intel): New.
426 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
427 (putop): Handle intel syntax.
428 (OP_indirE): Handle intel syntax.
429 (OP_E): Handle intel syntax.
430 (OP_I): Handle intel syntax.
431 (OP_sI): Handle intel syntax.
432 (OP_OFF): Handle intel syntax.
436 1999-01-27 Doug Evans <devans@casey.cygnus.com>
438 * fr30-opc.h,fr30-opc.c: Rebuild.
439 * i960c-opc.h,i960c-opc.c: Rebuild.
440 * m32r-opc.c: Rebuild.
442 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
444 * hppa-dis.c: revert HP merge changes until HP gives us
447 1999-01-19 Nick Clifton <nickc@cygnus.com>
449 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
450 offsets as well as symbloic address.
452 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
454 * hppa-dis.c: fix comments and some indentation.
456 1999-01-12 Doug Evans <devans@casey.cygnus.com>
458 * fr30-opc.c,i960c-opc.c: Regenerate.
460 1999-01-11 Doug Evans <devans@casey.cygnus.com>
462 * fr30-opc.c: Regenerate.
464 1999-01-06 Doug Evans <devans@casey.cygnus.com>
466 * m32r-dis.c: Regenerate.
468 1999-01-05 Doug Evans <devans@casey.cygnus.com>
470 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
471 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
472 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
474 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
476 * configure.in: Require autoconf 2.12.1 or higher.
478 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
480 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
482 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
484 * fr30-opc.c: Regenerated.
486 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
488 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
490 1998-12-15 Dave Brolley <brolley@cygnus.com>
492 * fr30-opc.c,fr30-opc.h: Regenerated.
494 1998-12-14 Dave Brolley <brolley@cygnus.com>
496 * fr30-opc.c,fr30-opc.h: Regenerated.
498 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
500 * fr30-opc.c,fr30-opc.h: Regenerated.
502 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
504 * m32r-opc.c: Regenerate.
506 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
508 * dis-buf.c (generic_strcat_address): reformat to GNU coding
509 conventions. change sprintf call to an sprintf_vma call.
511 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
513 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
515 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
517 The following changes were made by
518 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
519 David Taylor <taylor@texas.cygnus.com>, and
520 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
521 merge in changes by HP; HP did not create ChangeLog entries.
523 * dis-buf.c (generic_strcat_address): new function.
525 * hppa-dis.c: Changes to improve hppa disassembly.
526 Changed formatting in : reg_names, fp_reg_names,control_reg,
527 New variables : sign_extension_names, deposit_names, conversion_names
528 float_test_names, compare_cond_names_double, add_cond_names_double,
529 logical_cond_names_double, unit_cond_names_double,
530 branch_push_pop_names, saturation_names, shift_names, mix_names,
531 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
532 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
533 (fput_const): renamed as fput_hex_const
535 - use the macros fputs_filtered and
536 fput_decimal_const whenever possible; calls to sign_extend require
537 2 params -- add a missing second param of 0.
538 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
539 architecture version number of current machine. HP folks are
540 trying to handle situation where the target program was compiled
541 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
543 - added new cases : 'g', 'B', 'm'
544 - added cases specifically for PA 2.0
545 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
546 - calls to fput_const become calls to fput_hex_const
548 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
550 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
551 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
552 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
553 * Makefile.in: Rebuilt.
554 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
556 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
557 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
559 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
561 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
563 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
565 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
567 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
568 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
570 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
572 * fr30-opc.c: Regenerate.
574 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
576 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
578 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
580 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
582 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
584 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
586 1998-11-30 Doug Evans <devans@casey.cygnus.com>
588 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
589 CGEN_INSN_BASE_VALUE.
590 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
591 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
593 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
595 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
597 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
599 * fr30-asm.c,fr30-dis.c: Regenerated.
601 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
603 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
605 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
607 * fr30-opc.c: Regenerated.
609 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
611 * fr30-opc.c: Regenerated.
612 * fr30-opc.h: Regenerated.
613 * fr30-dis.c: Regenerated.
614 * fr30-asm.c: Regenerated.
616 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
618 * mips-opc.c (sync.p,sync.l): Swap insn values.
620 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
622 * fr30-opc.c: Regenerate.
624 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
626 * fr30-opc.c: Regenerated.
627 * fr30-opc.h: Regenerated.
629 1998-11-18 Doug Evans <devans@casey.cygnus.com>
631 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
632 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
634 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
636 * fr30-opc.c: Regenerated.
638 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
640 * fr30-opc.c: Regenerated.
641 * fr30-opc.h: Regenerated.
642 * fr30-dis.c: Regenerated.
643 * fr30-asm.c: Regenerated.
645 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
647 * po/opcodes.pot: Regenerated.
648 * fr30-opc.c: Regenerated.
649 * fr30-opc.h: Regenerated.
650 * fr30-dis.c: Regenerated.
651 * fr30-asm.c: Regenerated.
653 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
655 * disassemble.c (disassembler): Add support for FR30 target.
657 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
659 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
660 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
662 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
664 * po/opcodes.pot: Regenerate.
665 * po/POTFILES.in: Regenerate.
666 * fr30-opc.c: Regenerate.
667 * fr30-opc.h: Regenerate.
669 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
671 * m32r-asm.c: Regenerate.
673 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
675 * configure.in: Added case for bfd_fr30_arch.
676 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
677 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
678 (CLEANFILES): Added stamp-fr30.
680 * fr30-asm.c: New file.
681 * fr30-dis.c: New file.
682 * fr30-opc.c: New file.
683 * fr30-opc.h: New file.
684 * po/POTFILES.in: Regenerated
685 * po/opcodes.pot: Regenerated
687 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
689 * configure.in: detect cygwin* instead of cygwin32*
690 * configure: regenerate
692 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
694 * mips-opc.c (IS_M): Added.
696 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
698 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
700 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
702 * m32r-opc.h,m32r-opc.c: Regenerate.
704 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
706 * i386-dis.c (OP_3DNowSuffix): New static function.
709 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
710 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
711 (insn_codep): New static variable.
712 (print_insn_x86): Init insn_codep after prefixes.
713 (grps): Add GRP14 entries for prefetch, prefetchw.
716 From Jeff B Epler <jepler@usgs.gov>
717 * i386-dis.c (Suffix3DNow): New table.
719 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
721 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
723 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
725 * d10v-dis.c (print_operand): If num is nonzero, then
726 add OPERAND_ACC1, not OPERAND_ACC0.
728 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
730 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
733 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
735 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
738 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
740 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
742 1998-09-09 Michael Meissner <meissner@cygnus.com>
744 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
747 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
749 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
751 (print_insn_little_arm): Detect Thumb symbols in elf object
754 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
756 * alpha-dis.c (print_insn_alpha): Use the machine type to
757 decide which PALcode set to include.
759 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
761 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
763 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
765 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
766 MSUB and MSUBS instructions.
768 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
770 * ppc-opc.c (powerpc_operands): Omit parens around additions in
773 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
775 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
776 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
777 +, -, and d for ColdFire.
779 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
780 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
781 (extract_mbe): Likewise.
783 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
785 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
787 * m10300-opc.c: First cut at UDF instructions.
789 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
791 * m32r-opc.c: Regenerate (remove semantic descriptions).
793 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
795 * arm-dis.c (print_insn_big_arm): Fix indentation.
796 (print_insn_little_arm): Likewise.
798 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
800 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
802 (print_insn_little_arm): Likewise.
804 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
806 Move all global state data into opcode table struct, and treat
807 opcode table as something that is "opened/closed".
808 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
809 (cgen_asm_init): Delete.
810 (cgen_set_parse_operand_fn): New function.
811 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
812 (cgen_dis_init): Delete.
813 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
814 (cgen_current_{opcode_table_mach,endian}): Delete.
815 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
817 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
819 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
822 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
824 * m10300-opc.c: Add entries for "no_match_operands" field in
827 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
829 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
831 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
833 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
835 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
837 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
839 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
841 (OP_J): Remove unnecessary subtraction when 16-bit displacement
842 will be masked later.
844 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
846 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
848 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
850 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
852 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
854 * m10300-dis.c: Only recognize instructions from the currently
856 * m10300-opc.c: Add field indicating the particular variant of
857 the mn10300 each instruction is available on.
859 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
861 * configure.in: For bfd_vax_arch, build vax-dis.lo.
862 * Makefile.am: Rebuild dependencies.
863 (CFILES): Add vax-dis.c.
864 (ALL_MACHINES): Add vax-dis.lo.
865 * aclocal.m4: Rebuild with current libtool.
866 * configure, Makefile.in: Rebuild.
868 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
870 * vax-dis.c: New file, from work by Pauline Middelink
871 <middelin@polyware.iaf.nl>.
872 * disassemble.c (ARCH_vax): Define if ARCH_all.
873 (disassembler): Add case for ARCH_vax.
874 * makefile.vms: Support compilation on vms/vax.
876 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
878 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
879 related to sign extension and the size of ints.
881 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
883 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
884 instructions. Support (sp) addressing mode by expanding it into
887 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
889 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
891 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
893 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
895 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
897 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
900 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
902 * mips-dis.c (print_insn_little_mips): Previously, instruction
903 printing references the symbol table to determine whether the
904 instruction resides in a block regular instructions or mips16
905 instructions. However, when the disassembler gets used in other
906 environments where the symbol table is not present, we no longer
907 rely in the symbol table, rather, use the low bit of the
908 instructions address to guess. There should be no change for usage
909 of the disassembler in host based programs, gdb, objdump.
910 (print_insn_big_mips): ditto.
911 (print_insn_mips): ditto
913 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
915 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
917 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
919 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
921 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
923 * i386-dis.c (index16): Add '%' to register names. Use ','
926 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
928 * i386-dis.c: Don't print opcode suffix when we can figure out the
929 size (and gas can!) by register operands, or from the default
931 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
933 (dis386, dis386_twobyte, grps): Use new suffix macros.
934 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
935 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
936 order of cmps operands to agree with Intel docs. Correct operand
937 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
938 agree with Intel docs.
939 (print_insn_x86): Print orphan fwait before other prefixes.
940 Return correct byte count for orphan fwait with prefixes. Don't
941 print `bound' operands in reverse order.
942 (ckprefix): Stop accumulating prefixes if we get fwait.
943 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
945 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
947 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
948 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
950 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
952 Fix problems when bfd_vma is wider than long.
953 * i386-dis.c: Make op_address and start_pc unsigned.
954 (set_op): Make parameter unsigned.
955 (print_insn_x86): Cast to bfd_vma when passing a value to
957 * ns32k-dis.c (CORE_ADDR): Don't define.
958 (print_insn_ns32k): Change type of addr to bfd_vma. Use
959 bfd_scan_vma to read back address.
960 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
962 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
963 (NEXTULONG): New definition.
964 (print_insn_m68k): Avoid overflow when computing third argument of
966 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
967 Use disp instead of val to store offset values.
968 (print_indexed): Use base_disp instead of word to store base
969 displacement, to avoid overflow.
970 * m10300-dis.c (disassemble): Cast value to long when computing
971 pc-relative address, to get correct sign extension.
973 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
975 * m32r-opc.c: Regenerate.
977 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
979 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
980 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
982 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
984 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
986 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
988 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
990 (OP_DSreg): Rename from OP_DSSI.
991 (OP_ESreg): Rename from OP_ESDI.
992 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
994 (append_seg): Rename from append_prefix.
995 (ptr_reg): New function.
996 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
998 (PREFIX_ADDR): Rename from PREFIX_ADR.
999 (float_reg): Add non-broken opcodes for people who don't want
1002 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1004 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1007 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1009 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1011 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1013 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1014 0; produce error message for shifts of size 32 (or 64 for 64-bit
1015 shifts), because the hardware doesn't support them.
1017 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1019 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1020 LONG_2, LONG_2b formats to use this new operand.
1022 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1024 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1026 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1028 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1029 endian data support.
1031 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1033 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1034 and SHORT_B3b formats to use Rb instead of Ra.
1036 Add FLAG_MUL16 to MUL2XH opcode.
1038 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1039 to existing 1.1.1 parallelisation prohibition procedure.
1041 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1043 * m32r-asm.c,m32r-dis.c: Regenerate.
1045 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1047 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1048 with a shift count of 0.
1050 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1052 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1053 (cgen_hw_lookup_by_num): New function.
1055 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1057 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1059 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1061 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1062 as big-endian on SPARClite.
1064 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1066 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1068 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1070 * po/Make-in (install-info): New target.
1072 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1074 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1075 * configure: Rebuild.
1077 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1079 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1080 variety of ISA2 instructions to set bottom ten bits of trap code.
1082 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1084 * Makefile.am (config.status): Add explicit target so that
1085 config.status depends upon bfd/configure.in.
1086 * Makefile.in: Rebuild.
1088 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1090 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1091 instructions to set bottom ten bits of break code.
1092 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1093 for above optional argument.
1095 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1097 * makefile.vms: Run dec c with /nodebug.
1099 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1101 * Makefile.in: Rebuilt.
1102 * Makefile.am: Regenerated dependencies with mkdep.
1104 * opintl.h (_): Define as dgettext.
1106 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1108 * cgen-asm.c: Internationalised.
1109 * m32r-asm.c: Internationalised.
1110 * m32r-dis.c: Internationalised.
1111 * m32r-opc.c: Internationalised.
1113 * aclocal.m4: Regenerated.
1114 * configure: Regenerated.
1115 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1116 * Makefile.in: Rebuild.
1117 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1118 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1120 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1122 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1124 * aclocal.m4, configure: Rebuild with current tools.
1126 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1128 * opintl.h: New file - contains internationalisation macros used
1129 by source files in this directory.
1130 * po/: New subdirectory - contains internationalisation files.
1131 * po/Make-in: New file - Makefile constructor.
1132 * po/POTFILES.in: New file - list of files in opcodes directory
1133 that should be scan for internationalisation macros.
1134 * po/opcodes.pot: New file - list of internationisation strings
1135 found in files mentioned in po/POTFILES.in.
1136 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1137 entry. Add intl directory to include paths.
1138 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1139 HAVE_STRCPY, HAVE_LC_MESSAGES
1140 * configure.in: Add rule to build Makefile in po subdirectory.
1141 * Makefile.in: Rebuilt.
1142 * aclocal.m4: Rebuilt.
1143 * config.in: Rebuilt.
1144 * configure: Rebuilt.
1145 * alpha-opc.c: Internationalised.
1146 * arc-dis.c: Internationalised.
1147 * arc-opc.c: Internationalised.
1148 * arm-dis.c: Internationalised.
1149 * cgen-asm.c: Internationalised.
1150 * d30v-dis.c: Internationalised.
1151 * dis-buf.c: Internationalised.
1152 * h8300-dis.c: Internationalised.
1153 * h8500-dis.c: Internationalised.
1154 * i386-dis.c: Internationalised.
1155 * m10200-dis.c: Internationalised.
1156 * m10300-dis.c: Internationalised.
1157 * m68k-dis.c: Internationalised.
1158 * m88k-dis.c: Internationalised.
1159 * mips-dis.c: Internationalised.
1160 * ns32k-dis.c: Internationalised.
1161 * opintl.h: Internationalised.
1162 * ppc-opc.c: Internationalised.
1163 * sparc-dis.c: Internationalised.
1164 * v850-dis.c: Internationalised.
1165 * v850-opc.c: Internationalised.
1167 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1169 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1170 (asm_hash_table_entries): New variable.
1171 (cgen_asm_init): Free asm_hash_table_entries.
1172 (hash_insn_array,hash_insn_list): New functions.
1173 (build_asm_hash_table): Use them. Hash macro insns as well.
1174 (cgen_asm_lookup_insn): Update.
1175 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1176 (dis_hash_table_entries): New variable.
1177 (cgen_dis_init): Free dis_hash_table_entries.
1178 (hash_insn_array,hash_insn_list): New functions.
1179 (build_dis_hash_table): Use them. Hash macro insns as well.
1180 (cgen_dis_lookup_insn): Update.
1181 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1182 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1183 (cgen_macro_insn_count): New function.
1184 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1186 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1188 * i386-dis.c (OP_DSSI): Print segment override.
1190 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1192 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1195 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1197 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1198 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1199 * configure.in: Define and substitute WIN32LDFLAGS and
1201 * aclocal.m4: Rebuild with new libtool.
1202 * configure, Makefile.in: Rebuild.
1204 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1206 * m32r-opc.c: Regenerate.
1208 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1210 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1211 before trying to copy it.
1212 * Makefile.in: Rebuild.
1214 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1216 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1218 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1220 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1221 from an arbitrary valid buffer instead of fetching them on demand
1223 (invalid_float): use bit_extract_simple() instead of bit_extract().
1225 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1227 From H.J. Lu <hjl@gnu.org>:
1228 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1231 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1233 * Branched binutils 2.9.
1235 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1237 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1238 disassembling last 4 bytes of a section.
1240 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1242 Fix some gcc -Wall warnings:
1243 * arc-dis.c (print_insn): Add casts to avoid warnings.
1244 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1245 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1246 * m10200-dis.c (disassemble): Likewise.
1247 * m10300-dis.c (disassemble): Likewise.
1248 * ns32k-dis.c (print_insn_ns32k): Likewise.
1249 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1250 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1251 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1252 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1253 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1254 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1255 * tic80-dis.c (print_one_instruction): Likewise.
1256 * w65-dis.c (print_operand): Likewise.
1257 * z8k-dis.c (fetch_data): Likewise.
1258 * a29k-dis.c: Add return type for find_byte_func_type.
1259 * arc-opc.c: Include <stdio.h>. Remove declarations of
1260 insert_multshift and extract_multshift.
1261 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1263 (extract_value): Fully parenthesize expression.
1264 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1265 * h8500-opc.h (h8500_table): Fully bracket initializer.
1266 * w65-opc.h (optable): Likewise.
1267 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1268 * i386-dis.c (OP_E): Initialize local variables.
1269 * m10200-dis.c (print_insn_mn10200): Likewise.
1270 * mips-dis.c (print_insn_mips16): Likewise.
1271 * sh-dis.c (print_insn_shx): Likewise.
1272 * v850-dis.c (print_insn_v850): Likewise.
1273 * ns32k-dis.c (print_insn_arg): Declare.
1274 (get_displacement, invalid_float): Declare.
1275 (list_search, sign_extend, flip_bytes): Declare return type.
1276 (get_displacement): Likewise.
1277 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1279 (print_insn_ns32k): Make i unsigned.
1280 (invalid_float): Make static. Declare type of val.
1281 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1282 on each for iteration.
1283 * tic30-dis.c (get_indirect_operand): Likewise.
1284 * z8k-dis.c (print_insn_z8001): Declare return type.
1285 (print_insn_z8002): Likewise.
1286 (unparse_instr): Fix sprintf format strings.
1288 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1290 * mips-opc.c: Add "sync.l" and "sync.p".
1292 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1294 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1295 default m68k variant to recognize.
1297 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1298 (ctrl, cobr, mem, ea): Likewise.
1299 (print_addr): Likewise. Remove cast.
1300 (ea): Cast argument of print_addr to bfd_vma.
1302 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1304 (cgen_parse_unsigned_integer): Likewise.
1305 (cgen_parse_address): Likewise.
1307 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1309 * i960-dis.c (ctrl): Add full braces to structure initialization.
1310 (cobr, mem, reg): Likewise.
1311 (ea): Correct parenthesization in expression.
1313 * cgen-asm.c: Include <ctype.h>.
1314 (build_asm_hash_table): Remove unused local variable i.
1315 (cgen_parse_keyword): Add casts to avoid warnings.
1317 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1318 symbol. Fix indentation.
1319 (print_insn_little_arm): Likewise.
1321 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1323 * configure.in: Use AM_DISABLE_SHARED.
1324 * aclocal.m4, configure: Rebuild with libtool 1.2.
1326 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1328 These patches are courtesy of Jonathan Walton and Tony Thompson
1329 (athompso@cambridge.arm.com).
1331 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1334 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1335 both the offset and the label closest to the destination.
1337 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1339 * m32r-opc.h: Regenerate.
1341 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1343 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1345 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1347 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1348 assume that info->symbols is non-empty.
1350 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1352 * alpha-opc.c (cvtqs) There is no such thing.
1353 (cvttq): Missing most of the /*d variants.
1355 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1357 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1358 delayed branches or jumps.
1360 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1362 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1364 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1365 * tic30-dis.c (print_branch): Likewise.
1367 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1369 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1370 saved_symbol code as it is no longer needed.
1372 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1374 * cgen-asm.c: Include symcat.h.
1375 * cgen-dis.c,cgen-opc.c: Ditto.
1376 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1378 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1380 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1382 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1384 * m32r-opc.[ch]: Regenerate.
1386 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1388 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1389 arguments. Don't perform validation here.
1390 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1392 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1394 * m32r-opc.c: Regenerate.
1396 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1398 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1399 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1401 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1403 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1405 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1407 * configure.in: Get the version number from BFD.
1408 * configure: Rebuild.
1410 From H.J. Lu <hjl@gnu.org>:
1411 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1412 * Makefile.in: Rebuild.
1414 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1416 * m32r-opc.c: Regenerate.
1417 * m32r-opc.h: Regenerate.
1419 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1421 * m32r-opc.c: Regenerate.
1423 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1425 Fix rac to accept only a0:
1426 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1427 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1428 Introduce OPERAND_GPR.
1429 * d10v-dis.c (print_operand): Likewise.
1431 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1433 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1434 (cgen_hw_lookup): Make result const.
1435 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1437 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1439 * configure, aclocal.m4: Rebuild with new libtool.
1441 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1443 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1444 instructions use a PC relative branch, not absolute.
1446 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1448 * configure.in: Set libtool_enable_shared rather than
1449 libtool_shared. Remove diversion hack.
1450 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1452 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1454 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1455 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1457 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1459 * tic30-dis.c: New file.
1460 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1461 * configure.in: Handle bfd_tic30_arch.
1462 * Makefile.am: Rebuild dependencies.
1463 (CFILES): Add tic30-dis.c
1464 (ALL_MACHINES): Add tic30-dis.lo.
1465 * configure, Makefile.in: Rebuild.
1467 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1469 * m32r-opc.h (HAVE_CPU_M32R): Define.
1471 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1473 * v850-opc.c (insertion routines): If both alignment and size is
1474 wrong then report this.
1476 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1478 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1479 Only recognize instructions for the current target_processor.
1481 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1483 * d10v-dis.c (PC_MASK): Correct value.
1484 (print_operand): If there's a reloc, don't calculate the
1485 address because they could be in different sections.
1487 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1489 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1490 instruction after the 4650's "mul" instruction; nobody's using the
1491 4010 these days. If object files someday indicate which processor
1492 variant they're intended for, we can do a better job at this.
1494 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1496 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1497 table provided entry size. Use CGEN_INSN_MNEMONIC.
1498 (cgen_parse_keyword): Rewrite.
1499 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1500 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1501 * cgen-opc.c: Clean up pass over `struct foo' usage.
1502 (cgen_keyword_lookup_value): Handle "" entry.
1503 (cgen_keyword_add): Likewise.
1505 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1507 * mips-opc.c: Add FP_D to s.d instruction flags.
1509 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1511 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1513 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1515 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1516 PC relative offset forms before the 15 bit forms. An assembler command
1517 line option now chooses the default.
1519 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1521 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1522 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1524 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1526 * configure: Only build libopcodes shared if --enable-shared's value
1527 was `yes', or was set to `*opcodes*'.
1528 * aclocal.m4: Likewise.
1529 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1530 original source of this bit of code. It's not clear what the best fix
1533 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1535 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1536 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1537 offset forms before the 15 bit forms, to default to the long forms.
1539 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1541 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1543 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1545 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1546 symbol if none is present.
1547 (print_insn_big_arm): Prevent examination of stored symbol if
1550 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1552 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1554 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1556 * disassemble.c: Remove disasm_symaddr() function.
1558 * arm-dis.c: Use info->symbol instead of info->flags to determine
1559 if disassmbly should be in Thumb or Arm mode.
1561 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1563 * arm-dis.c: Add support for disassembling Thumb opcodes.
1564 (print_insn_thumb): New function.
1566 * disassemble.c (disasm_symaddr): New function.
1568 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1569 (thumb_opcodes): Table of Thumb opcodes.
1571 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1573 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1575 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1576 and 'v' as operand types.
1578 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1580 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1581 <olivier.carmona@di.epfl.ch>.
1582 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1583 which has a two word opcode with a one word argument.
1585 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1587 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1588 unsigned, not signed.
1589 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1591 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1593 * d10v-dis.c (print_operand):
1594 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1596 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1598 * d10v-opc.c (OPERAND_FLAG): Split into:
1599 (OPERAND_FFLAG, OPERAND_CFLAG) .
1603 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1605 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1606 field for all INSN_MACRO's.
1607 * mips16-opc.c: same
1609 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1611 * mips-opc.c (sync,cache): These are 3900 insns.
1613 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1615 sh-opc.h (sh_table): Remove ftst/nan.
1617 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1619 * mips-opc.c (ffc, ffs): Fix mask.
1621 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1623 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1626 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1628 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1629 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1631 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1633 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1634 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1636 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1638 * v850-dis.c (disassemble): Replace // with /* ... */
1640 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1642 * sparc-opc.c: Add wr & rd for v9a asr's.
1643 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1644 (v9a_asr_reg_names): New variable.
1645 Patch from David Miller <davem@vger.rutgers.edu>.
1647 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1649 * sparc-opc.c (v9notv9a): New insn type.
1650 (IMPDEP): Move to the end to not conflict with edge8 et al.
1651 Patch from David Miller <davem@vger.rutgers.edu>.
1653 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1655 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1657 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1659 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1661 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1663 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1664 of disassemble_info structure to determine if an overlay address
1665 has a matching symbol in low memory.
1667 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1668 new symbol_at_address_func field in disassemble_info structure.
1670 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1672 * v850-opc.c (extract_d22): Use signed arithmatic.
1674 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1676 * mips-opc.c: Three op mult is not an ISA insn.
1678 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1680 * mips-opc.c: Fix formatting.
1682 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1685 than assuming that char is signed. Explicitly sign extend 16 bit
1686 values, rather than assuming that short is 16 bits.
1687 (OP_sI, OP_J, OP_DIR): Likewise.
1689 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1694 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1696 * v850-opc.c: Fix typo in comment.
1698 * v850-dis.c (disassemble): Add test of processor type when
1699 determining opcodes.
1701 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1703 * configure.in: Use a diversion to set enable_shared before the
1704 arguments are parsed.
1705 * configure: Rebuild.
1707 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1709 * m68k-opc.c (TBL1): Use ! rather than `.
1710 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1712 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1714 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1716 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1718 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1721 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1722 * aclocal.m4: Rebuild with new libtool.
1723 * configure: Rebuild.
1725 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1727 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1729 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1731 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1733 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1735 * v850-opc.c (v850_opcodes): Further rearrangements.
1737 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1739 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1741 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1743 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1746 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1748 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1750 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1752 * v850-opc.c: Initialise processors field of v850_opcode structure.
1754 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1756 Merge changes from Martin Hunt:
1758 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1760 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1761 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1762 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1764 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1766 * d30v-dis.c (print_insn): First operand of d*i (delayed
1767 branch) instructions is relative.
1769 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1770 (d30v_operand_table): Add IMM6S3 type.
1771 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1773 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1774 and cmp instructions.
1776 * d30v-opc.c: Correct entries for repeat*, and sat*.
1777 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1778 types. Correct several formats.
1780 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1782 * d30v-opc.c (pre_defined_registers): Change control registers.
1784 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1785 SHORT_C2. Manual was incorrect.
1787 * d30v-dis.c (lookup_opcode): Return value now indicates
1788 if an opcode has a short and a long form. Used for deciding
1789 to append a ".s" or ".l".
1790 (print_insn): Append a ".s" to an instruction if it is
1791 the short form and ".l" if it is a long form. Do not append
1792 anything if the instruction has only one possible size.
1794 * d30v-opc.c: Change mulx2h to require an even register.
1795 New form: SHORT_A2; a SHORT_A form that needs an even
1796 register as the first operand.
1798 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1799 instruction was not being disassembled if there were an odd
1800 number of instructions.
1802 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1804 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1806 * v850-dis.c (disassemble): Improved display of register lists.
1808 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1810 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1811 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1812 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1813 fandnot1s, fandnot2s.
1815 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1817 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1819 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1821 * cgen-asm.c (cgen_parse_address): New argument resultp.
1822 All callers updated.
1823 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1825 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1827 * mn10200-dis.c (disassemble): PC relative instructions are
1828 relative to the next instruction, not the current instruction.
1830 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1832 * v850-dis.c (disassemble): Only signed extend values that are not
1833 returned by extract functions.
1834 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1836 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1838 * v850-opc.c: Update comments. Remove use of
1839 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1841 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1843 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1845 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1847 * configure: Rebuilt with latest devo autoconf for NT support.
1849 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1851 * v850-dis.c (disassemble): Use curly brace syntax for register
1854 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1855 where r0 is being used as a destination register.
1857 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1859 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1861 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1863 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1865 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1867 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1868 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1871 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1873 * configure (cgen_files): Add support for v850e target.
1874 * configure.in (cgen_files): Add support for v850e target.
1876 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1878 * configure (cgen_files): Add support for v850ea target.
1879 * configure.in (cgen_files): Add support for v850ea target.
1881 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1883 * configure.in (bfd_arc_arch): Add.
1884 * configure: Rebuild.
1885 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1886 * Makefile.in: Rebuild.
1887 * arc-dis.c, arc-opc.c: New files.
1888 * disassemble.c (ARCH_all): Define ARCH_arc.
1889 (disassembler): Add ARC support.
1891 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1893 * v850-dis.c (disassemble): Add support for v850EA instructions.
1895 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1896 (v850_opcodes): Add v850EA instructions.
1898 * v850-dis.c (disassemble): Add support for v850E instructions.
1900 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1901 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1902 insert_spe, extract_spe): New Functions.
1903 (v850_opcodes): Add v850E instructions.
1905 * v850-opc.c: Reorganised and re-layed out to improve readability
1908 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1910 * configure: Rebuild with autoconf 2.12.1.
1912 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1914 * aclocal.m4, configure: Rebuild with new automake patches.
1916 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1918 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1919 * acinclude.m4: Just include acinclude.m4 from BFD.
1920 * aclocal.m4, configure: Rebuild.
1922 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1924 * Makefile.am: New file, based on old Makefile.in.
1925 * acconfig.h: New file.
1926 * acinclude.m4: New file.
1927 * stamp-h.in: New file.
1928 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1929 Removed shared library handling; now handled by libtool. Replace
1930 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1931 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1932 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1933 handling in AC_OUTPUT.
1934 * dep-in.sed: Change .o to .lo.
1935 * Makefile.in: Now built with automake.
1936 * aclocal.m4: Now built with aclocal.
1937 * config.in, configure: Rebuild.
1939 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1941 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1943 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1945 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1947 * sparc-dis.c (sorted_opcodes): New static local.
1948 (struct opcode_hash): `opcode' is pointer to const element.
1949 (build_hash): First arg is now table of sorted pointers.
1950 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1951 (compare_opcodes): Update.
1953 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1955 * cgen-opc.c: #include <ctype.h>.
1956 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1957 Handle case insensitive hashing.
1958 (hash_keyword_value): Change type of `value' to unsigned int.
1960 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1962 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1963 precision FP, mark it as such. Likewise for double precision
1964 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1967 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1969 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1971 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1972 nesting depth when all the macros are expanded.
1974 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1976 * sparc-opc.c: The fcmp v9a instructions take an integer register
1977 as a destination, not a floating point register. From Christian
1978 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1980 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1982 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1983 syntax. From Roman Hodek
1984 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1986 * i386-dis.c (twobyte_has_modrm): Fix pand.
1988 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1990 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1992 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1994 * arm-dis.c: Add prototypes for arm_decode_shift and
1997 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1999 * mips-opc.c: Add r3900 insns.
2001 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2003 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2004 print delay slot instructions on the same line. When using a PC
2005 relative load, add a comment with the value being loaded if it can
2008 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2010 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2011 to pushS/popS for segment regs and byte constant so that
2012 pushw/popw printed when in 16 bit data mode.
2014 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2015 print cbtw, cwtd in 16 bit data mode.
2016 * i386-dis.c (putop): extra case W to support above.
2018 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2019 address size prefix in 16 bit address mode.
2021 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2023 * sh-dis.c: Reindent. Rename local variable fprintf to
2026 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2028 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2030 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2032 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2034 * mips16-opc.c (mip16_opcodes): same.
2036 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2038 * m68k-opc.c (moveb): Change $d to %d.
2040 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2042 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2043 (twobyte_has_modrm): Likewise.
2045 (OP_MMX, OP_EM, OP_MS): New static functions.
2047 * i386-dis.c: Revert patch of April 4. The output now matches
2050 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2052 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2055 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2057 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2059 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2061 * Makefile.in (install): Depend upon installdirs.
2062 (installdirs): New target.
2064 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2066 From Thomas Graichen <graichen@rzpd.de>:
2067 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2068 * configure: Rebuild.
2070 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2072 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2073 Delete string{,s}.h support.
2075 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2077 * cgen-asm.c (cgen_parse_operand_fn): New global.
2078 (cgen_parse_{{,un}signed_integer,address}): Update call to
2079 cgen_parse_operand_fn.
2080 (cgen_init_parse_operand): New function.
2081 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2082 from cgen_asm_init_parse.
2083 (m32r_cgen_assemble_insn): New operand `errmsg'.
2084 Delete call to as_bad, return error message to caller.
2085 (m32r_cgen_asm_hash_keywords): #if 0 out.
2087 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2089 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2091 [case 'J']: Fix typo in register name.
2093 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * configure.in: Substitute SHLIB_LIBS.
2096 * configure: Rebuild.
2097 * Makefile.in (SHLIB_LIBS): New variable.
2098 ($(SHLIB)): Use $(SHLIB_LIBS).
2100 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2102 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2104 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2106 * disassemble.c (disassembler): Handle m32r.
2108 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2110 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2111 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2112 * Makefile.in (CFILES): Add them.
2113 (ALL_MACHINES): Add them.
2114 (dependencies): Regenerate.
2115 * configure.in (cgen_files): New variable.
2116 (bfd_m32r_arch): Add entry.
2117 * configure: Regenerate.
2119 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2121 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2122 * configure: Rebuild.
2124 * Makefile.in: Rebuild dependencies.
2126 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2128 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2131 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2133 * Branched binutils 2.8.
2135 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2137 * m10200-dis.c: Rename from mn10200-dis.c.
2138 * m10200-opc.c: Rename from mn10200-opc.c.
2139 * m10300-dis.c: Rename from mn10300-dis.c
2140 * m10300-opc.c: Rename from mn10300-opc.c.
2141 * Makefile.in: Update accordingly.
2143 * mips16-opc.c: Add mul and dmul macros.
2145 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2147 * makefile.vms: Update CFLAGS, add clean target.
2149 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2151 * mips-opc.c: Add "wait". From Ralf Baechle
2152 <ralf@gnu.ai.mit.edu>.
2154 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2155 * configure, config.in: Rebuild.
2156 * sysdep.h: Include <stdlib.h> if it exists.
2157 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2159 * Makefile.in: Rebuild dependencies.
2161 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2163 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2164 Andrew Bray <andy@madhouse.demon.co.uk>.
2166 * mips-opc.c: Add cast when setting mips_opcodes.
2168 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2170 * v850-dis.c (disassemble): Fix sign extension problem.
2171 * v850-opc.c (extract_d*): Fix sign extension problems to make
2172 disassembly calculate branch offsets correctly.
2174 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2176 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2178 * mips-opc.c: Add dctr and dctw.
2180 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2182 * d30v-dis.c (print_insn): Change the way signed constants
2185 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2187 * Makefile.in (BFD_H): New variable.
2188 (HFILES): New variable.
2189 (CFILES): Add all C files.
2190 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2191 Delete old dependencies, and build new ones.
2192 * dep-in.sed: New file.
2194 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2196 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2198 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2200 * mn10200-opc.c: Change "trap" to "syscall".
2201 * mn10300-opc.c: Add new "syscall" instruction.
2203 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2205 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2206 mulul insns on the coldfire.
2208 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2211 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2212 (print_insn_little_arm): Likewise.
2214 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2216 Based on patches from H.J. Lu <hjl@lucon.org>:
2217 * i386-dis.c (fetch_data): Add prototype.
2218 * m68k-dis.c (fetch_data): Add prototype.
2219 (dummy_print_address): Add prototype. Make static.
2220 * ppc-opc.c (valid_bo): Add prototype.
2221 * sparc-dis.c (build_hash_table): Add prototype.
2222 (is_delayed_branch, compute_arch_mask): Add prototypes.
2223 (print_insn_sparc): Make several local variables const.
2224 (compare_opcodes): Change arguments to const PTR. Add prototype.
2225 * sparc-opc.c (arg): Change name field to be const.
2226 (lookup_name, lookup_value): Add prototypes. Change table and
2227 name parameters to be const.
2228 (sparc_encode_asi): Change name parameter to be const.
2229 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2230 (sparc_encode_sparclet_cpreg): Likewise.
2231 (sparc_decode_asi): Change return type to be const.
2232 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2233 (sparc_decode_sparclet_cpreg): Likewise.
2235 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2237 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2238 Solaris doesn't like the combined options, and the -f is
2240 (stamp-tshlink, install): Likewise.
2242 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2244 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2247 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2249 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2251 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2253 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2256 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2258 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2260 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2262 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2264 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2266 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2268 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2270 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2271 floatformat_to_double to make portable.
2272 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2275 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2277 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2278 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2280 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2282 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2283 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2285 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2287 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2288 (OFF_SL_BR_SCALED): ... to this, and added the flag
2289 TIC80_OPERAND_BASEREL to the flags word.
2290 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2293 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2295 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2296 Change mips_opcodes from const array to a pointer,
2297 and change bfd_mips_num_opcodes from const int to int,
2298 so that we can increase the size of the mips opcodes table
2301 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2303 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2304 store BITNUM values in the table in one's complement form
2305 to match behavior when assembler is given a raw numeric
2306 value for a BITNUM operand.
2307 * tic80-dis.c (print_operand_bitnum): Ditto.
2309 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2311 * d30v-opc.c: Removed references to FLAG_X.
2313 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2315 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2317 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2319 * Makefile.in: Added d30v object files.
2320 * configure: (bfd_d30v_arch) Rebuilt.
2321 * configure.in: (bfd_d30v_arch) Added new case.
2322 * d30v-dis.c: New file.
2323 * d30v-opc.c: New file.
2324 * disassemble.c (disassembler) Add entry for d30v.
2326 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2328 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2329 representations for the floating point BITNUM values.
2331 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2333 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2334 in the table in one's complement form, as they appear in the
2336 (tic80_symbol_to_value): Use macros to access predefined
2338 (tic80_value_to_symbol): Ditto.
2339 (tic80_next_predefined_symbol): New function.
2340 * tic80-dis.c (print_operand_bitnum): Remove code that did
2341 one's complement for BITNUM values.
2343 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2345 * makefile.vms: Remove 8 bit characters. Update to latest
2348 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2350 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2352 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2354 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2355 (IMM24_PCREL): Likewise.
2357 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2359 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2360 address for an extended PC relative instruction that is not a
2363 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2365 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2368 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2370 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2371 (tic80_opcodes): Sort entries so that long immediate forms
2372 come after short immediate forms, making it easier for
2373 assembler to select the right one for a given operand.
2375 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2377 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2379 (print_insn_mips16): Likewise.
2381 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2383 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2384 a symbol class that restricts translation to just that
2385 class (general register, condition code, etc).
2387 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2389 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2390 and REG_DEST_E for register operands that have to be
2391 an even numbered register. Add REG_FPA for operands that
2392 are one of the floating point accumulator registers.
2393 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2394 (tic80_opcodes): Change entries that need even numbered
2395 register operands to use the new operand table entries.
2396 Add "or" entries that are identical to "or.tt" entries.
2398 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * mips16-opc.c: Add new cases of exit instruction for
2402 * mips-dis.c (print_mips16_insn_arg): Display floating point
2403 registers in operands of exit instruction. Print `$' before
2404 register names in operands of entry and exit instructions.
2406 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2408 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2409 pairs for all predefined symbols recognized by the assembler.
2410 Also used by the disassembling routines.
2411 (tic80_symbol_to_value): New function.
2412 (tic80_value_to_symbol): New function.
2413 * tic80-dis.c (print_operand_control_register,
2414 print_operand_condition_code, print_operand_bitnum):
2415 Remove private tables and use tic80_value_to_symbol function.
2417 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2419 * d10v-dis.c (print_operand): Change address printing
2420 to correctly handle PC wrapping. Fixes PR11490.
2422 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2424 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2427 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2429 * mips-dis.c (print_insn_mips16): Set insn_info information.
2430 (print_mips16_insn_arg): Likewise.
2432 * mips-dis.c (print_insn_mips16): Better handling of an extend
2433 opcode followed by an instruction which can not be extended.
2435 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2437 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2438 coldfire moveb instruction to not allow an address register as
2439 destination. Although the documentation does not indicate that
2440 this is invalid, experiments uncovered unexpected behavior.
2441 Added a comment explaining the situation. Thanks to Andreas
2442 Schwab for pointing this out to me.
2444 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2446 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2447 entries are presorted so that entries with the same mnemonic are
2448 adjacent to each other in the table. Sort the entries for each
2449 instruction so that this is true.
2451 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2453 * m68k-dis.c: Include <libiberty.h>.
2454 (print_insn_m68k): Sort the opcode table on the most significant
2455 nibble of the opcode.
2457 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2459 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2460 "vsub", "vst", "xnor", and "xor" instructions.
2461 (V_a1): Renamed from V_a, msb of accumulator reg number.
2462 (V_a0): Add macro, lsb of accumulator reg number.
2464 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2466 * tic80-dis.c (print_insn_tic80): Broke excessively long
2467 function up into several smaller ones and arranged for
2468 the instruction printing function to be callable recursively
2469 to print vector instructions that have both a load and a
2470 math instruction packed into a single opcode.
2471 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2472 to explain why it comes after the other vector opcodes.
2474 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2476 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2477 move insns to handle immediate operands.
2479 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2481 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2482 fix operand mask in the "moveml" entries for the coldfire.
2484 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2486 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2487 New macros for building vector instruction opcodes.
2488 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2489 FMT_LI, which were unused. The field is now a flags field.
2490 Remove some opcodes that are possible, but illegal, such
2491 as long immediate instructions with doubles for immediate
2492 values. Add "vadd" and "vld" instructions.
2494 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2496 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2497 the order more logical. Move the shift alias instructions ("rotl",
2498 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2499 interspersed with the regular sr.x and sl.x instructions. Add
2500 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2501 "sub", "subu", "swcr", and "trap".
2503 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2505 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2506 (OFF_SL_PC): Renamed from OFF_SL.
2507 (OFF_SS_BR): New operand type for base relative operand.
2508 (OFF_SL_BR): New operand type for base relative operand.
2509 (REG_BASE): New operand type for base register operand.
2510 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2511 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2512 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2514 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2515 10 char field, padded with spaces on rhs, rather than a string
2516 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2517 than old TIC80_OPERAND_RELATIVE. Add support for new
2518 TIC80_OPERAND_BASEREL flag bit.
2520 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2522 * tic80-dis.c (print_insn_tic80): Print floating point operands
2524 * tic80-opc.c (SPFI): Add single precision floating point
2525 immediate operand type.
2526 (ROTATE): Add rotate operand type for shifts.
2527 (ENDMASK): Add for shifts.
2528 (n): Macro for the 'n' bit.
2529 (i): Macro for the 'i' bit.
2530 (PD): Macro for the 'PD' field.
2531 (P2): Macro for the 'P2' field.
2532 (P1): Macro for the 'P1' field.
2533 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2536 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2538 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2539 adding in current address for pc-relative operands.
2541 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2543 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2544 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2545 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2546 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2547 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2548 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2549 (REG_SCALED, LSI_SCALED): New operand types.
2550 (E): New macro for 'E' bit at bit 27.
2551 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2552 opcodes, including the various size flavors (b,h,w,d) for
2553 the direct load and store instructions.
2555 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2557 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2559 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2560 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2561 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2562 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2563 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2564 masks with "MASK_* & ~M_*" to get the M bit reset.
2565 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2567 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2569 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2570 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2571 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2573 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2574 CC, SICR, and LICR table entries.
2575 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2576 "bcnd", and "brcr" opcodes.
2578 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2580 * ppc-opc.c (powerpc_operands): Make comment match the
2581 actual fields (no shift field).
2582 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2583 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2584 partial implementation, work in progress.
2585 * tic80-opc.c (tic80_operands): Begin construction operands table.
2586 (tic80_opcodes): Continue populating opcodes table and start
2587 filling in the operand indices.
2588 (tic80_num_opcodes): Add this.
2590 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2592 * m68k-opc.c: Add #B case for moveq.
2594 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2596 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2597 before they are used.
2599 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2601 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2602 for "breakpoint" instruction.
2604 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2606 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2607 (dep): Use ALL_CFLAGS rather than CFLAGS.
2609 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2611 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2614 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2616 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2617 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2619 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2621 * mips16-opc.c: Add "abs".
2623 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2625 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2626 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2627 (disassembler): Add bfd_arch_tic80 support to set disassemble
2628 to print_insn_tic80.
2629 * tic80-dis.c (print_insn_tic80): Add stub.
2631 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2633 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2634 * configure: Regenerate with autoconf.
2635 * tic80-dis.c: Add file.
2636 * tic80-opc.c: Add file.
2638 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2640 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2642 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2644 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2645 (mn10200_opcodes): Use it for some logicals and btst insns.
2646 Add "break" and "trap" instructions.
2648 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2650 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2652 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2654 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2655 relative load or add now depends upon whether the instruction is
2658 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2660 * mn10200-dis.c: Finish writing disassembler.
2661 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2662 Fix mask for "jmp (an)".
2664 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2665 handle endianness issues for mn10300.
2667 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2669 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2671 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2672 instruction. Fix opcode field for "movb (imm24),dn".
2674 * mn10200-opc.c (mn10200_operands): Fix insertion position
2677 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2679 * mn10200-opc.c: Create mn10200 opcode table.
2680 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2681 but moving along nicely.
2683 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2685 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2687 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2689 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2690 specifiers for fmovem* instructions.
2692 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2694 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2696 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2698 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2701 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2703 * mn10300-opc.c: Add some comments explaining the various
2706 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2708 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2710 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2713 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2714 operand specifiers in fmovm* instructions.
2716 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2718 * ppc-opc.c (insert_li): Give an error if the offset has the two
2719 least significant bits set.
2721 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2723 * mips-dis.c (print_insn_mips16): Separate the instruction from
2724 the arguments with a tab, not a space.
2726 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2728 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2731 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2734 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2736 * configure: Rebuild with autoconf 2.12.
2738 Add support for mips16 (16 bit MIPS implementation):
2739 * mips16-opc.c: New file.
2740 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2741 (mips16_reg_names): New static array.
2742 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2743 after seeing a 16 bit symbol.
2744 (print_insn_little_mips): Likewise.
2745 (print_insn_mips16): New static function.
2746 (print_mips16_insn_arg): New static function.
2747 * mips-opc.c: Add jalx instruction.
2748 * Makefile.in (mips16-opc.o): New target.
2749 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2750 * configure: Rebuild.
2752 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2754 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2755 operand specifiers in *save, *restore and movem* instructions.
2757 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2760 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2761 register operands for immediate arithmetic, not, neg, negx, and
2762 set according to condition instructions.
2764 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2765 specifier of the effective-address operand in immediate forms of
2766 arithmetic instructions. The specifier for the immediate operand
2767 notes how and where the constant will be stored.
2769 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2771 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2774 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2777 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2779 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2781 * mn10300-dis.c (disassemble): Handle register lists.
2783 * mn10300-opc.c: Fix handling of register list operand for
2784 "call", "ret", and "rets" instructions.
2786 * mn10300-dis.c (disassemble): Print PC-relative and memory
2787 addresses symbolically if possible.
2788 * mn10300-opc.c: Distinguish between absolute memory addresses,
2789 pc-relative offsets & random immediates.
2791 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2793 (disassemble): Handle SPLIT and EXTENDED operands.
2795 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2797 * mn10300-dis.c: Rough cut at printing some operands.
2799 * mn10300-dis.c: Start working on disassembler support.
2800 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2802 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2804 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2806 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2808 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2810 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2812 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2813 register argument is calls and jmp instructions.
2815 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2817 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2818 getx operand. Fix opcode for mulqu imm,dn.
2820 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2822 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2823 in MN10300_OPERAND_SPLIT operands for how many bits
2824 appear in the basic insn word. Add IMM32_HIGH24,
2825 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2826 (mn10300_opcodes): Use new operands as needed.
2828 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2829 for bset, bclr, btst instructions.
2830 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2832 * mn10300-opc.c (mn10300_operands): Remove many redundant
2833 operands. Update opcode table as appropriate.
2834 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2835 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2837 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2839 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2840 operands (for indexed load/stores). Fix bitpos for DI
2841 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2842 few instructions that insert immediates/displacements in the
2843 middle of the instruction. Add IMM8E for 8 bit immediate in
2844 the extended part of an instruction.
2845 (mn10300_operands): Use new opcodes as appropriate.
2847 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2849 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2850 sequential so the assembler never parallelizes it with
2853 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2855 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2856 a data/address register that appears in register field 0
2857 and register field 1.
2858 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2860 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2862 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2863 standard disassembly.
2865 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2866 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2867 Recategorize PALcode instructions.
2869 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2871 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2873 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2875 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2876 there are no operand types.
2878 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2880 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2882 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2884 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2886 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2888 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2890 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2891 and sst.w instructions.
2893 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2896 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2898 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2901 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2903 * ppc-opc.c (PPCPWR2): Define.
2904 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2907 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2909 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2910 field for movhu instruction.
2912 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2913 cast value to "long" not "signed long" to keep hpux10
2916 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2918 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2921 * mn10300-opc.c (FMT*): Remove definitions.
2923 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2924 for shift-by-register opcodes.
2926 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2927 into [AD][MN][01] for encoding the position of the register
2930 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2932 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2933 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2935 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2937 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2938 Fix various typos. Add "PAREN" operand.
2939 (MEM, MEM2): Define.
2940 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2941 operands. Fix several typos.
2943 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2946 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2948 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2949 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2951 (mn10300_opcodes): Break opcode format out into its own field.
2952 Update many operand fields to deal with signed vs unsigned
2953 issues. Fix one or two typos in the "mov" instruction
2954 opcode, mask and/or operand fields.
2956 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2958 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2959 m68851 wasn't reset.
2961 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2963 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2964 all opcodes. Very rough cut at operands for all opcodes.
2966 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2969 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10200-opc.c, mn10300-opc.c: New files.
2972 * mn10200-dis.c, mn10300-dis.c: New files.
2973 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2974 * disassemble.c: Break mn10x00 support into 10200 and 10300
2976 * configure.in: Likewise.
2977 * configure: Rebuilt.
2979 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2981 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2983 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2985 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2987 * disassemble (ARCH_mn10x00): Define.
2988 (disassembler): Handle bfd_arch_mn10x00.
2989 * configure.in: Recognize bfd_mn10x00_arch.
2990 * configure: Rebuilt.
2992 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2994 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2995 accordingly. Don't declare functions using op_rtn.
2997 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2999 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3000 params to be more standard.
3001 * (disassemble): Print absolute addresses and symbolic names for
3002 branch and jump targets.
3003 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3005 * (v850_opcodes): Add breakpoint insn.
3007 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3009 * m68k-opc.c: Move the fmovemx data register cases before the
3010 other cases, so that they get recognized before the data register
3011 does gets treated as a degenerate register list.
3013 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3015 * mips-opc.c: Add a case for "div" and "divu" with two registers
3016 and a destination of $0.
3018 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3020 * mips-dis.c (print_insn_arg): Add prototype.
3021 (_print_insn_mips): Ditto.
3023 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3025 * mips-dis.c (print_insn_arg): Print condition code registers as
3028 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3030 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3032 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3034 * v850-dis.c (disassemble): Make static. Provide prototype.
3036 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3038 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3041 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3043 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3044 ']' characters into the output stream.
3045 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3046 Add "memop" field to all opcodes (for the disassembler).
3047 Reorder opcodes so that "nop" comes before "mov" and "jr"
3048 comes before "jarl".
3050 * v850-dis.c (print_insn_v850): Fix typo in last change.
3052 * v850-dis.c (print_insn_v850): Properly handle disassembling
3053 a two byte insn at the end of a memory region when the memory
3054 region's size is only two byte aligned.
3056 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3058 * v850-dis.c (v850_reg_names): Define.
3059 (v850_sreg_names, v850_cc_names): Likewise.
3060 (disassemble): Very rough cut at printing operands (unformatted).
3062 * v850-opc.c (BOP_MASK): Fix.
3063 (v850_opcodes): Fix mask for jarl and jr.
3065 * v850-dis.c: New file. Skeleton for disassembler support.
3066 * Makefile.in Remove v850 references, they're not needed here.
3067 * configure.in: Add v850-dis.o when building v850 toolchains.
3068 * configure: Rebuilt.
3069 * disassemble.c (disassembler): Call v850 disassembler.
3071 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3072 (insert_d8_6, extract_d8_6): New functions.
3073 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3074 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3076 (IF4A, IF4B): Use "D7" instead of "D7S".
3077 (IF4C, IF4D): Use "D8_7" instead of "D8".
3078 (IF4E, IF4F): New. Use "D8_6".
3079 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3080 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3082 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3083 (v850_operands): Change D16 to D16_15, use special insert/extract
3084 routines. New new D16 that uses the generic insert/extract code.
3085 (IF7A, IF7B): Use D16_15.
3086 (IF7C, IF7D): New. Use D16.
3087 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3089 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3090 message. Issue an error if the branch offset is odd.
3092 * v850-opc.c: Add notes about needing special insert/extract
3093 for all the load/store insns, except "ld.b" and "st.b".
3095 * v850-opc.c (insert_d22, extract_d22): New functions.
3096 (v850_operands): Use insert_d22 and extract_d22 for
3098 (insert_d9): Fix range check.
3100 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3102 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3103 and set bits field to D9 and D22 operands.
3105 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3107 * v850-opc.c (v850_operands): Define SR2 operand.
3108 (v850_opcodes): "ldsr" uses R1,SR2.
3110 * v850-opc.c (v850_opcodes): Fix opcode specs for
3111 sld.w, sst.b, sst.h, sst.w, and nop.
3113 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3115 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3116 end of the opcode table.
3118 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3120 * d10v-opc.c (pre_defined_registers): Added register pairs,
3121 "r0-r1", "r2-r3", etc.
3123 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3125 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3126 Create I16U for an unsigned 16bit mmediate operand.
3127 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3129 * v850-opc.c (v850_operands): Define EP operand.
3130 (IF4A, IF4B, IF4C, IF4D): Use EP.
3132 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3133 with immediate operand, "movhi". Tweak "ldsr".
3135 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3136 correct. Get sld.[bhw] and sst.[bhw] closer.
3138 * v850-opc.c (v850_operands): "not" is a two byte insn
3140 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3142 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3144 * v850-opc.c (two): Get order of words correct.
3146 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3148 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3149 register source and destination operands.
3150 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3152 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3153 same thinko in "trap" opcode.
3155 * v850-opc.c (v850_opcodes): Add initializer for size field
3158 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3159 Add D8 for 8-bit unsigned field in short load/store insns.
3160 (IF4A, IF4D): These both need two registers.
3161 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3162 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3163 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3164 for "ldsr" and "stsr".
3165 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3168 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3169 short store word (sst.w).
3171 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3173 * v850-opc.c (v850_operands): Added insert and extract fields,
3174 pointers to functions that handle unusual operand encodings.
3176 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3178 * v850-opc.c (v850_opcodes): Enable "trap".
3180 * v850-opc.c (v850_opcodes): Fix order of displacement
3181 and register for "set1", "clr1", "not1", and "tst1".
3183 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3185 * v850-opc.c (v850_operands): Add "B3" support.
3186 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3189 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3191 * v850-opc.c: Close unterminated comment.
3193 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3195 * v850-opc.c (v850_operands): Add flags field.
3196 (v850_opcodes): add move opcodes.
3198 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3200 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3201 * configure: (bfd_v850v_arch) Add new case.
3202 * configure.in: (bfd_v850_arch) Add new case.
3203 * v850-opc.c: New file.
3205 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3207 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3209 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3211 * d10v-opc.c: Add additional information to the opcode
3212 table to help determinine which instructions can be done
3215 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3217 * mpw-make.sed: Update editing of include pathnames to be
3220 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3222 * arm-opc.h: Added "bx" instruction definition.
3224 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3226 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3228 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3230 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3232 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3234 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3236 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3238 * makefile.vms: Update for alpha-opc changes.
3240 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3242 * i386-dis.c (print_insn_i386): Actually return the correct value.
3243 (ONE, OP_ONE): #ifdef out; not used.
3245 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3247 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3248 Changed subi operand type to treat 0 as 16.
3250 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3252 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3255 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3257 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3258 memory transfer instructions. Add new format string entries %h and %s.
3259 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3262 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3264 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3265 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3267 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3269 * alpha-dis.c (print_insn_alpha_osf): Remove.
3270 (print_insn_alpha_vms): Remove.
3271 (print_insn_alpha): Make globally visible. Chose the register
3272 names based on info->flavour.
3273 * disassemble.c: Always return print_insn_alpha for the alpha.
3275 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3277 * d10v-dis.c (dis_long): Handle unknown opcodes.
3279 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3281 * d10v-opc.c: Changes to support signed and unsigned numbers.
3282 All instructions with the same name that have long and short forms
3283 now end in ".l" or ".s". Divs added.
3284 * d10v-dis.c: Changes to support signed and unsigned numbers.
3286 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3288 * d10v-dis.c: Change all functions to use info->print_address_func.
3290 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3292 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3293 move ccr/sr insns more strict so that the disassembler only
3294 selects them when the addressing mode is data register.
3296 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3297 * d10v-opc.c (pre_defined_registers): Declare.
3298 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3299 to pick a better name for the registers.
3301 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3303 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3304 operands for fexpand and fpmerge. From Christian Kuehnke
3305 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3307 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3309 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3310 print routine. Take new regnames and cpumask arguments.
3311 Kill the environment variable nonsense.
3312 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3313 (print_insn_alpha_vms): New function. Do VMS style regnames.
3314 * disassemble.c (disassembler): Test bfd flavour to pick
3315 between OSF and VMS routines. Default to OSF.
3317 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3319 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3320 * configure: Rebuild.
3321 * Makefile.in (install): Use @INSTALL_SHLIB@.
3323 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3325 * configure: (bfd_d10v_arch) Add new case.
3326 * configure.in: (bfd_d10v_arch) Add new case.
3327 * d10v-dis.c: New file.
3328 * d10v-opc.c: New file.
3329 * disassemble.c (disassembler) Add entry for d10v.
3331 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3333 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3334 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3336 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3338 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3339 distinguish between variants of the instruction set.
3340 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3341 distinguish between variants of the instruction set.
3343 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3345 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3346 the 8086 instruction set.
3347 * i386-dis.c: General cleanups. Make most things static. Add
3348 prototypes. Get rid of static variables aflags and dflags. Pass
3349 them as args (to almost everything).
3351 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3353 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3355 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3357 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3358 if the next arg is marked with SRC_IN_DST. Gross.
3360 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3361 we're looking for and find EXR.
3363 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3364 if we're looking for KBIT and we don't find it.
3366 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3369 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3370 3bit immediate operands.
3372 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3374 * Released binutils 2.7.
3376 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3377 <kkaempf@progis.ac-net.de>.
3379 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3381 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3383 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3385 * sparc-dis.c (print_insn_sparclite): New routine to print
3386 sparclite instructions.
3388 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3390 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3392 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3394 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3395 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3396 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3398 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3400 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3401 Use autoconf-set values.
3402 (docdir, oldincludedir): Removed.
3403 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3405 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3407 * alpha-opc.c: New file.
3408 * alpha-opc.h: Remove.
3409 * alpha-dis.c: Complete rewrite to use new opcode table.
3410 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3411 * configure: Rebuild with autoconf 2.10.
3412 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3413 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3415 (alpha-opc.o): New target.
3417 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3419 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3420 Set imm_added_to_rs1 even if the source and destination register
3423 * sparc-opc.c: Add some two operand forms of the wr instruction.
3425 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3427 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3430 * disassemble.c (disassembler): Handle H8/S.
3431 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3433 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3435 * sparc-opc.c: Add beq/teq as aliases for be/te.
3437 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3438 <sergei@msil.sps.mot.com>.
3440 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3442 * makefile.vms: New file.
3444 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3446 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3448 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3451 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3453 * i386-dis.c (OP_OFF): Call append_prefix.
3455 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3457 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3458 unsigned long to silence a warning from the Solaris PowerPC
3461 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3463 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3465 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3467 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3469 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3470 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3471 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3472 cpush, cpusha, cpull sparclet insns.
3474 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3476 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3478 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3480 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3481 Set F_FLOAT on other floating point instructions.
3483 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3485 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3487 (powerpc_opcodes): Add 860/821 specific SPRs.
3489 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3491 * configure.in: Permit --enable-shared to specify a list of
3492 directories. Set and substitute BFD_PICLIST.
3493 * configure: Rebuild.
3494 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3495 uses. Set to @BFD_PICLIST@.
3497 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3499 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3500 not "abs", which may be needed for the absolute in something
3501 like btst #0,@10:8. Print L_3 immediates separately from other
3502 immediates. Change ABSMOV reference to ABS8MEM.
3504 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3506 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3507 (current_arch_mask): New static global.
3508 (compute_arch_mask): New static function.
3509 (print_insn_sparc): Delete sparc_v9_p. New static local
3510 current_mach. Resort opcode table if current_mach changes.
3511 Generalize "insn not supported" test.
3512 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3513 Delete test for v9/!v9.
3514 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3516 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3517 (brfcx): Renamed to FBRX.
3518 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3519 coprocessor mnemonics are not supported on the sparclet).
3520 (condf): Renamed to CONDF.
3521 (SLCBCC2): Delete F_ALIAS flag.
3523 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3525 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3526 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3528 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3530 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3531 that the shared library version number is set correctly.
3533 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3535 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3536 Miles Bader <miles@gnu.ai.mit.edu>.
3537 * configure: Rebuild.
3539 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3541 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3544 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3546 * configure: Rebuild with autoconf 2.8.
3548 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3550 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3551 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3553 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3555 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3556 since they appear as targets in Makefile.in.
3557 * configure: Rebuild.
3559 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3561 * mpw-make.sed: Edit out shared library support bits.
3563 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3565 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3566 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3567 (sparc_opcodes): Add sparclet insns.
3568 (sparclet_cpreg_table): New static local.
3569 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3570 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3572 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3574 * i386-dis.c (index16): New static variable.
3575 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3577 (OP_indirE): Return result of OP_E.
3578 (OP_E): Check for 16 bit addressing mode, and disassemble
3579 correctly. Optimised 32 bit case a little. Don't print
3580 "(base,index,scale)" when sib specifies only an offset.
3582 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3584 * configure.in: Set and substitute SHLIB_DEP.
3585 * configure: Rebuild.
3586 * Makefile.in (SHLIB_DEP): New variable.
3587 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3588 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3589 COMMON_SHLIB, add them to piclist with appropriate modifications.
3590 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3591 here: just use piclist.
3593 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3595 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3596 (print_insn_sparc): Rewrite v9/not-v9 tests.
3597 (compare_opcodes): Likewise.
3598 * sparc-opc.c (MASK_<ARCH>): Define.
3599 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3600 (sparclet,v6notv9): Define.
3601 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3602 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3604 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3606 * configure.in: Call AC_PROG_CC before configure.host.
3607 * configure: Rebuild.
3609 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3611 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3613 * i386-dis.c (onebyte_has_modrm): New static array.
3614 (twobyte_has_modrm): New static array.
3615 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3617 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3619 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3622 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3624 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3627 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3629 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3630 m68010up, not just m68020up | cpu32.
3632 * Makefile.in (SONAME): New variable.
3633 ($(SHLINK)): Make a link to the transformed name, as well.
3634 (stamp-tshlink): New target.
3635 (install): Skip stamp-tshlink during install.
3637 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3639 * configure.in: Call AC_ARG_PROGRAM.
3640 * configure: Rebuild.
3641 * Makefile.in (program_transform_name): New variable.
3642 (install): Transform library name before installing it.
3644 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3646 * i960-dis.c (mem): Add HX dcinva instruction.
3648 Support for building as a shared library, based on patches from
3649 Alan Modra <alan@spri.levels.unisa.edu.au>:
3650 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3651 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3652 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3653 * configure: Rebuild.
3654 * Makefile.in (ALLLIBS): New variable.
3655 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3656 (COMMON_SHLIB, SHLINK): New variables.
3657 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3658 (STAGESTUFF): Remove variable.
3659 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3660 (stamp-piclist, piclist): New targets.
3661 ($(SHLIB), $(SHLINK)): New targets.
3662 ($(OFILES)): Depend upon stamp-picdir.
3663 (disassemble.o): Build twice if PICFLAG is set.
3664 (MOSTLYCLEAN): Add pic/*.o.
3665 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3666 (distclean): Remove pic and stamp-picdir.
3667 (install): Install shared libraries.
3668 (stamp-picdir): New target.
3670 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3672 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3673 Print unknown instruction as "unknown", rather than in hex.
3675 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3677 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3679 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3681 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3683 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3685 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3686 when necessary. From Ulrich Drepper
3687 <drepper@myware.rz.uni-karlsruhe.de>.
3689 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3691 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3692 sparc_num_opcodes. Update architecture enum values.
3693 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3694 (sparc_opcode_lookup_arch): New function.
3695 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3696 (sparc_opcodes): Add v9a shutdown insn.
3698 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3700 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3701 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3703 (print_insn_sparc64): Deleted.
3704 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3707 * sparc-opc.c (architecture_pname): Add v9a.
3709 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3711 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3712 incorrectly defined as 0x16 when it should be 0x15.
3713 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3714 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3715 excb (exception barrier) which is defined in the Alpha
3716 Architecture Handbook version 2.
3717 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3718 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3719 disassembled as or, for example.
3721 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3723 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3724 (_print_insn_mips): Change i from int to unsigned int.
3726 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3728 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3729 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3731 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3733 * i386-dis.c: Added Pentium Pro instructions.
3735 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3737 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3740 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3742 * sh-opc.h (sh_nibble_type): Added REG_B.
3743 (sh_arg_type): Added A_REG_B.
3744 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3746 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3748 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3750 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3752 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3754 * Makefile.in (distclean): Remove stamp-h. From Ronald
3755 F. Guilmette <rfg@monkeys.com>.
3757 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3759 From David Mosberger-Tang <davidm@azstarnet.com>:
3760 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3763 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3765 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3766 (sh_table): Added many SH3 opcodes.
3767 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3769 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3771 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3772 (subco,subco.): Mark this PPC, not PPCCOM.
3774 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3776 * configure: Rebuild with autoconf 2.7.
3778 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3780 * configure: Rebuild with autoconf 2.6.
3782 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3784 * configure.in: Sort list of architectures. Accept but do nothing
3785 for alliant, convex, pyramid, romp, and tahoe.
3787 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3789 * a29k-dis.c (print_special): Change num to unsigned int.
3791 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3793 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3796 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3799 * configure: Rebuilt.
3801 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3803 * configure.in: Add case for bfd_i860_arch.
3804 * configure: Rebuild.
3806 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3808 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3809 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3810 (NEXTDOUBLE): Likewise.
3811 (print_insn_m68k): Don't match fmoveml if there is more than one
3812 register in the list.
3813 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3815 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3817 * m68k-opc.c: Use #W rather than #w.
3818 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3820 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3822 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3823 and likewise for all the dbxx opcodes.
3825 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3827 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3829 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3831 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3832 the VR4100 specific instructions to the mips_opcodes structure.
3834 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3836 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3837 ugly Metrowerks bug in CW6, is fixed in CW7.
3839 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3841 * ppc-opc.c (whole file): Add flags for common/any support.
3843 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3845 * Makefile.in (BISON): Remove macro.
3846 (FLAGS_TO_PASS): Remove BISON.
3848 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3850 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3852 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3853 instructions that take no args by looking at the match mask.
3854 (print_insn_arg): Always print "%" before register names.
3855 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3856 [case '_']: Don't print "@#" before address.
3857 [case 'J']: Use "%s" as format string, not register name.
3858 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3860 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3862 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3865 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3867 From David Mosberger-Tang <davidm@azstarnet.com>
3869 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3870 (alpha_insn_set): added definitions for VAX floating point
3871 instructions (Unix compilers don't generate these, but handcoded
3872 assembly might still use them).
3874 * alpha-dis.c (print_insn_alpha): added support for disassembling
3875 the miscellaneous instructions in the Alpha instruction set.
3877 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3879 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3880 no longer create sysdep.h, sed ppc-opc.c to work around a
3881 serious Metrowerks C bug.
3882 * mpw-make.in: Remove.
3883 * mpw-make.sed: New file, used by mpw-configure to edit
3884 Makefile.in into an MPW makefile.
3886 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3888 * Makefile.in (maintainer-clean): New synonym for realclean.
3890 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3892 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3893 which use '0', '1', and '2' instead. Specify the proper size for
3894 a pmove immediate operand. Correct the pmovefd patterns to be
3895 moves to a register, not from a register.
3896 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3898 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3900 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3901 %psr, %wim, %tbr as F_NOTV9.
3903 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3905 * Makefile.in (Makefile): Just rebuild Makefile when running
3907 (config.h, stamp-h): New targets.
3908 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3909 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3910 rebuilding config.h.
3911 * configure: Rebuild.
3913 * mips-opc.c: Change unaligned loads and stores with "t,A"
3914 operands to use "t,A(b)".
3916 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3918 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3920 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3922 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3923 until 3 instead of until 2.
3925 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3927 * Makefile.in (ALL_CFLAGS): Define.
3928 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3929 (MOSTLYCLEAN): Add config.log.
3930 (distclean): Don't remove config.log.
3931 * configure.in: Substitute HDEFINES.
3932 * configure: Rebuild.
3934 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3936 * sh-opc.h (sh_arg_type): Add F_FR0.
3937 (sh_table, case fmac): Add F_FR0 as first argument.
3939 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3941 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3943 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3945 * sparc-dis.c: Remove all references to NO_V9.
3947 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3949 * aclocal.m4: Just include ../bfd/aclocal.m4.
3950 * configure: Rebuild.
3952 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3954 * sparc-dis.c (X_DISP19): Define.
3955 (print_insn, case 'G'): Use it.
3956 (print_insn, case 'L'): Sign extend displacement.
3958 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3960 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3961 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3962 host_makefile_frag or frags.
3963 * aclocal.m4: New file.
3964 * configure: Rebuild.
3965 * Makefile.in (INSTALL): Set to @INSTALL@.
3966 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3967 (INSTALL_DATA): Set to @INSTALL_DATA@.
3969 (AR_FLAGS): Set to rc rather than qc.
3970 (CC): Define as @CC@.
3971 (CFLAGS): Set to @CFLAGS@.
3972 (@host_makefile_frag@): Remove.
3973 (config.status): Remove dependency upon @frags@.
3975 * configure.in: ../bfd/config.bfd now just sets shell variables.
3976 Use them rather than looking through target Makefile fragments.
3977 * configure: Rebuild.
3979 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3981 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3983 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3985 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3986 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3989 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3990 (lookup_{name,value}): New functions.
3991 (prefetch_table): New static local.
3992 (sparc_{encode,decode}_prefetch): New functions.
3993 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3995 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3997 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4000 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4002 * sh-dis.c: Correct comment on first line of file.
4004 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4006 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4008 * sparc-opc.c (asi, membar): New static locals.
4009 (sparc_{encode,decode}_{asi,membar}): New functions.
4010 (sparc_opcodes, membar insn): Fix.
4011 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4012 Support decoding of membar masks.
4015 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4017 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4019 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4021 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4022 and likewise for the other branches. Add bhs as an alias for bcc,
4023 and likewise for the size variants. Add dbhs as an alias for
4026 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4028 * sh-opc.h (FP sts instructions): Update to match reality.
4030 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4032 * m68k-dis.c: (fpcr_names): Add % before all register names.
4033 (reg_names): Likewise.
4034 (print_insn_arg): Don't explicitly print % before register names.
4035 Add % before register names in static array names. In case 'r',
4036 print data registers as `@(Dn)', not `Dn@'. When printing a
4037 memory address, don't print @# before it.
4038 (print_indexed): Change base_disp and outer_disp from int to
4039 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4040 syntax. Sign extend 8 byte displacement correctly.
4041 (print_base): Print using MIT syntax. Print zpc when appropriate.
4042 Change parameter disp from int to bfd_vma.
4044 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4047 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4049 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4050 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4051 * sh-opc.h (sh_arg_type): Add new operand types.
4052 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4054 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4056 * Makefile.in (distclean): Remove generated file config.h.
4058 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4060 * Makefile.in (distclean): Remove generated file config.h.
4062 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4064 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4066 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4068 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4069 rather than numopcodes. Use m68k_opcodes rather than removed
4070 opcode function. Don't check F_ALIAS.
4071 (print_insn_arg): Change first parameter to be const char *.
4072 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4073 (m68k-opc.o): New target.
4074 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4075 * configure: Rebuild.
4077 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4079 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4080 (opcode_bits, opcode_hash_table): New variables.
4081 (opcodes_initialized): Renamed from opcodes_sorted.
4082 (build_hash_table): New function.
4083 (is_delayed_branch): Use hash table.
4084 (print_insn): Renamed from print_insn_sparc, made static.
4085 Build and use hash table. If !sparc64, ignore sparc64 insns,
4086 and vice-versa if sparc64.
4087 (print_insn_sparc, print_insn_sparc64): New functions.
4088 (compare_opcodes): Move sparc64 opcodes to end.
4089 Print commutative insns with constant second.
4090 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4092 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4095 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4096 avoids printing a delay slot in a delay slot.
4097 * sh-opc.h (sh_table): Fully bracket last entry.
4099 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4101 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4103 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4105 * configure.in: Get host_makefile_frag from ${srcdir}.
4107 * configure.in: Autoconfiscated. Check for string[s].h. Create
4108 config.h from config.in. Don't set up sysdep.h link.
4109 * sysdep.h: New file.
4110 * configure, config.in: New files, generated from configure.in.
4111 * Makefile.in: Updated to be processed autoconf-style.
4112 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4113 (Makefile): Depend on config.status.
4114 (config.status): New rule.
4115 * configure.bat: Update Makefile substitutions.
4117 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4119 * mips-opc.c (L1): Define.
4120 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4121 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4124 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4126 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4127 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4128 have multiple add units but only a single logical unit.
4130 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4131 shifted by 18, without any insertion or extraction function.
4132 (insert_cr, extract_cr): Remove.
4134 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4136 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4139 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4141 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4142 * sh-opc.h: Add copyright.
4144 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4146 * Makefile.in (crunch-m68k): Delete extra target accidentally
4147 checked in a while ago.
4149 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4151 * sh-opc.h (sh_table): Add SH3 support.
4153 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4155 * sh-opc.h: Added bsrf and braf.
4157 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4159 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4160 bogus [ls]fm{ea,fd} patterns.
4162 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4163 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4164 initialize it from memory. Make function static.
4165 (print_insn_{big,little}_arm): New functions.
4166 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4167 the correct endianness.
4169 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4171 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4174 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4176 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4177 17th, so that it builds again using GCC as the compiler.
4179 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4181 * mips-dis.c (print_insn_little_mips): Cast return value from
4182 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4183 expects an unsigned long, and that might be fewer words of
4184 argument storage (e.g., if bfd_vma is long long on a 32-bit
4186 (print_insn_big_mips): Likewise with bfd_getb32 value.
4187 (_print_insn_mips): Now static.
4189 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4191 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4192 gcc memory hog problem with initializer is fixed.
4194 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4196 Merge in support for Mac MPW as a host.
4197 (Old change descriptions retained for informational value.)
4199 * mpw-config.in (archname): Compute from the config.
4200 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4202 * mpw-config.in (target_arch): Compute from canonical target.
4203 (m68k, mips, powerpc, sparc): Add architectures.
4204 * mpw-make.in (disassemble.c.o): Add.
4205 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4207 * mpw-config.in (BFD_MACHINES): Set to a default value.
4208 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4210 * mpw-make.in (CSEARCH): Add extra-include to search path.
4212 * mpw-config.in (varargs.h): Don't create.
4213 (sysdep.h): Create using forward-include.
4214 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4216 * mpw-config.in: New file, MPW version of configure.in.
4217 * mpw-make.in: New file, MPW version of Makefile.in.
4219 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4221 * alpha-dis.c (print_insn_alpha): Put empty statement after
4224 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4226 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4227 (low_sign_extend): Likewise.
4228 (get_field): Delete unused function.
4229 (set_field, deposit_14, deposit_21): Likewise.
4231 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4233 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4236 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4238 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4240 * alpha-opc.h (OSF_ASMCODE): define
4241 print pal-code names as defined in App C of the
4242 Alpha Architecture Reference Manual
4244 * alpha-dis.c: cleaned up output
4245 print stylized code forms as defined in App A.4.3 of the
4246 Alpha Architecture Reference Manual
4248 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4250 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4252 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4255 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4257 * m68k-dis.c (opcode): New function. Returns address of opcode
4258 table entry given index, even if the opcode table was split to
4259 work around gcc bugs.
4260 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4262 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4263 (reg_names): Now const.
4264 (print_insn_arg): Arrays cacheFieldName and names now const.
4265 (print_indexed): Array scales now const.
4267 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4269 * ppc-opc.c: Sort recently added instructions by minor opcode
4270 number within major opcode number.
4272 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4274 * hppa-dis.c: Include libhppa.h.
4276 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4278 * mips-opc.c: Change dli to use M_DLI, and add dla.
4280 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4282 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4284 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4286 * mips-opc.c: Add r4650 mul instruction.
4288 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4290 * mips-opc.c: Add uld and usd macros for unaligned double load and
4293 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4295 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4296 mfdcr, mtdcr, icbt, iccci.
4298 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4300 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4301 signed char fields to shorts, more portable.
4303 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4305 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4306 char fields as signed chars, since they may have negative values.
4308 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4310 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4311 (mycroft@netbsd.org).
4313 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4315 From "Logg, Ed" <elogg@ea.com>:
4316 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4317 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4320 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4322 * ppc-opc.c: Changes based on patch from David Edelsohn
4323 <edelsohn@mhpcc.edu>.
4324 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4327 (insert_tbr): New static function.
4328 (extract_tbr): New static function.
4329 (XFXFXM_MASK, XFXM): Define.
4330 (XSPRBAT_MASK, XSPRG_MASK): Define.
4331 (powerpc_opcodes): Add instructions to access special registers by
4332 name. Add mtcr and mftbu.
4334 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4336 * mips-opc.c (P3): Define.
4337 (mips_opcodes): Add mad and madu.
4339 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4341 * configure.in: Add W65 support.
4342 * disassemble.c: Likewise.
4343 * w65-opc.h, w65-dis.c: New files.
4345 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4347 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4350 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4352 * mips-opc.c: Add dli as a synonym for li.
4354 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4356 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4357 print something for reserved opcode values, even if it won't
4360 * mips-dis.c (_print_insn_mips): When initializing, shift right
4361 and mask, to avoid sign extension problems on the Alpha.
4363 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4366 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4368 * sh-opc.h (mov.l gbr): Get direction right.
4369 * sh-dis.c (print_insn_shx): New function.
4370 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4371 print opcodes with right byte order.
4373 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4375 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4376 to avoid conflicts with getopt.
4378 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4380 * hppa-dis.c (print_insn_hppa): Read the instruction using
4381 bfd_getb32, so that it works on a little endian or 64 bit host.
4382 Remove unused local variable op.
4384 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4386 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4387 addu does not work correctly if -mips3.
4389 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4391 * a29k-dis.c (print_special): Add special register names defined
4392 on 29030, 29040 and 29050.
4393 (print_insn): Handle new operand type 'I'.
4395 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4397 * Makefile.in (INSTALL): Use top level install.sh script.
4399 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4401 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4402 that it works on a little endian host.
4404 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4406 * configure.in: Use ${config_shell} when running config.bfd.
4408 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4410 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4412 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4414 * a29k-dis.c (print_insn): Print the opcode.
4416 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4418 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4420 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4422 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4424 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4426 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4427 which store a value into memory.
4429 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4431 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4432 * arm-dis.c, arm-opc.h: New files.
4434 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4436 * Makefile.in (ns32k-dis.o): Add dependency.
4437 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4438 string, not as array of chars.
4440 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4442 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4444 * sparc-opc.c: Added sparclite extended FP operations, and
4445 versions of v9 impdep* instructions permitting specification of
4448 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4450 * i960-dis.c (reg_names): Now const.
4451 (struct sparse_tabent): New type, copied from array type in mem
4453 (ctrl): Local static array ctrl_tab now const.
4454 (cobr): Local static array cobr_tab now const.
4455 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4456 static variable mem_tab no longer explicitly initialized. Changed
4457 mem_init to const array of struct sparse_tabent.
4458 (reg): Local static variable reg_tab no longer explicitly
4459 initialized. Changed reg_init to const array of struct
4461 (ea): Local static array scale_tab now const.
4463 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4466 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4468 * configure.bat: the disassember needs to be enabled for
4469 "objdump -d" to work in djgpp.
4471 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4473 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4474 (invalid_float): Enabled general version, doesn't require running
4475 on ns32k host. Changed to take char* argument, and test for
4476 explicitly specified sizes, instead of using sizeof() on host CPU
4478 (INVALID_FLOAT): Cast first argument.
4479 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4480 list_P032, list_M032): Now const.
4481 (optlist, list_search): Made appropriate arguments now point to
4483 (print_insn_arg): Changed static array of one-character-string
4484 pointers into a static const array of characters; fixed sprintf
4485 statement accordingly.
4487 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4489 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4490 from distribution. A ns32k-dis.c from a previous distribution has
4491 been brought up to date and supports the new interface.
4493 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4495 * configure.in: add bfd_ns32k_arch target support.
4497 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4498 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4500 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4502 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4505 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4507 * h8300-dis.c, mips-dis.c: Don't use true and false.
4509 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4511 * configure.in: Change --with-targets to --enable-targets.
4513 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4515 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4516 opcodes to the first instruction with that opcode, to speed
4517 disassembly of large files. From ralphc@pyramid.com (Ralph
4520 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4522 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4524 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4526 * configure.bat: update to latest makefile.in
4528 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4530 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4531 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4532 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4533 slot insn is in a delay slot.
4534 * z8k-opc.h: (resflg): Fix patterns.
4535 * h8500-opc.h Fix CR insn patterns.
4537 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4539 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4540 "cmpl" before POWER versions, so that gas -many uses them.
4542 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4544 * disassemble.c: New file.
4545 * Makefile.in (OFILES): Add disassemble.o.
4546 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4547 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4548 binutils/configure.in.
4550 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4551 opcode being examined.
4553 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4555 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4556 (insert_ral, insert_ram, insert_ras): New functions.
4557 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4558 RAS for store with update.
4560 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4562 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4563 (edelsohn@npac.syr.edu).
4565 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4570 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4572 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4574 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * ppc-opc.c (powerpc_operands): The signedp field has been
4577 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4578 instead. Add new operand SISIGNOPT.
4579 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4580 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4581 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4584 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4586 * i386-dis.c (struct private): Renamed to dis_private. `private'
4587 is a reserved word for dynix cc.
4589 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4591 * configure.in: Change error message to refer to bfd/config.bfd
4592 rather than bfd/configure.in.
4594 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4596 * ppc-opc.c: Define POWER2 as short alias flag.
4597 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4600 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4602 * i960-dis.c (print_insn_i960): Don't read a second word for
4603 opcodes 0, 1, 2 and 3.
4605 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4609 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4611 * m68881-ext.c: Removed; no longer used.
4612 * Makefile.in: Changed accordingly.
4614 * m68k-dis.c (ext_format_68881): Don't declare.
4615 (print_insn_m68k): If an instruction uses place 'i', it uses at
4616 least four fixed bytes.
4617 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4618 extended float, convert to double using floatformat_to_double, not
4619 ieee_extended_to_double, and fetch the data before converting it.
4621 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4623 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4624 davidj@ICSI.Berkeley.EDU (David Johnson).
4626 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4628 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4629 PowerPC uses bdnz[l][a].
4631 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4633 * dis-buf.c, i386-dis.c: Include sysdep.h.
4635 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4637 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4639 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4640 by Motorola PowerPC 601 with PPC_OPCODE_601.
4641 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4642 Disassemble Motorola PowerPC 601 instructions as well as normal
4643 PowerPC instructions.
4645 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4647 * i960-dis.c (reg, mem): Just use a static array instead of
4650 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4652 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4653 condition name index if this is for a negated condition.
4655 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4656 Floating point format for 'H' operand is backwards from normal
4657 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4658 operands (fmpyadd and fmpysub), handle bizarre register
4659 translation correctly for single precision format.
4661 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4662 or 'I' operands if the next format specifier is 'M' (fcmp
4663 condition completer).
4665 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4667 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4668 single number giving a bitmask for the MB and ME fields of an M
4669 form instruction. Change NB to accept 32, and turn it into 0;
4670 also turn 0 into 32 when disassembling. Seperated SH from NB.
4671 (insert_mbe, extract_mbe): New functions.
4672 (insert_nb, extract_nb): New functions.
4673 (SC_MASK): Mask out SA and LK bits.
4674 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4675 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4676 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4677 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4678 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4679 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4680 (powerpc_macros): Define table of macro definitions.
4681 (powerpc_num_macros): Define.
4683 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4684 if PPC_OPERAND_NEXT is set.
4686 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4688 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4689 char. Retrieve contents using bfd_getl32 instead of shifting.
4691 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4693 * ppc-opc.c: New file. Opcode table for PowerPC, including
4694 opcodes for POWER (RS/6000).
4695 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4696 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4697 (CFILES): Add ppc-dis.c.
4698 (ppc-dis.o, ppc-opc.o): New targets.
4699 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4701 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4703 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4704 No space before 'u', 'f', or 'N'.
4706 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4708 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4709 farther than we should.
4711 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4713 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4715 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4717 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4719 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4720 needs it, to prevent reading past the end of a section.
4722 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4724 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4725 Removed t,A case for la; always use t,A(b) case.
4727 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4729 From Ted Lemen <mellon@pepper.ncd.com>
4730 * mips-dis.c (print_insn_arg): Handle 'k'.
4731 * mips-opc.c: Make cache use k, not t.
4733 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4735 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4736 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4737 FLOAT_FORMAT_CODE to put out floating point register names.
4739 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4743 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4745 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4747 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4750 larger than 32. Moved dsxx32 variants first for disassembler.
4752 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4754 * z8kgen.c, z8k-opc.h: Add full lda information.
4756 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4758 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4759 movb instructions. Any necessary space will be emitted by
4760 the code to handle nullification completers.
4762 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4766 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4768 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4769 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4771 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4775 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4777 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4778 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4780 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4782 * m88k-dis.c (m88kdis): comment change. Remove space after
4784 (printop): handle new arg types DEC and XREG for m88110.
4786 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4788 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4789 type for absolute branch addresses. Delete special
4790 "ble" and "be" code in 'W' operand code.
4792 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4794 * mips-opc.c: Set hazard information correctly for branch
4795 likely instructions.
4797 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4799 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4800 info->fprintf_func for printing and info->print_address_func for
4803 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4805 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4807 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4809 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4810 Corrected second case of "b" for disassembler.
4812 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4815 to BFD swapping routines to correspond to BFD name changes.
4817 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4819 * mips-opc.c: Change div machine instruction to be z,s,t rather
4820 than s,t. Change div macro to be d,v,t rather than d,s,t.
4821 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4822 rem and remu which generates only the corresponding div
4823 instruction. This is for compatibility with the MIPS assembler,
4824 which only generates the simple machine instruction when an
4825 explicit destination of $0 is used.
4826 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4828 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4831 WR_31 hazard for bal, bgezal, bltzal.
4833 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4835 * hppa-dis.c (print_insn_hppa): Use print function
4836 from within the disassemble_info, not fprintf_filtered.
4838 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4840 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4841 Law, law@cs.utah.edu.)
4843 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * mips-opc.c ("absu"): Removed.
4848 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4850 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4851 Changed hazard information to distinguish between memory load
4852 delays and coprocessor load delays.
4854 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4858 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4860 * configure.in: Don't pass cpu to config.bfd.
4862 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * m88k-dis.c (m88kdis): Make class unsigned.
4866 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4868 * alpha-dis.c (print_insn_alpha): One branch format case was
4869 missing the instruction name.
4871 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4873 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4874 Add the arch-specific auxiliary files.
4875 (OFILES): Remove the arch-specific auxiliary files
4876 and use BFD_MACHINES instead of DIS_LIBS.
4877 * configure.in: Set BFD_MACHINES based on --with-targets option.
4879 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4884 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4886 * sparc-opc.c: Change CONST to const to deal with gcc
4887 -Dconst=__const -traditional.
4889 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4891 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4892 coprocessor instructions out of #if 0, and made them use new
4895 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4897 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4899 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4901 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4902 instruction, for use by the disassembler.
4904 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4905 hand-coded sign extensions that depended on 32-bit host ints.
4906 FIXME, we still depend on big-endian host bitfield ordering.
4907 (sparc_print_insn): Set the insn_info_valid field, and the
4908 other fields that describe the instruction being printed.
4910 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4912 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4913 `jmp' instead of just one of them.
4915 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4917 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4918 (fput_fp_reg_r): Renamed from fput_reg_r.
4919 (fput_fp_reg): New function.
4920 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4922 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4924 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4926 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4928 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4930 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4931 don't output a space.
4933 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4935 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4937 * mips-opc.c: New file, containing opcode table from
4938 ../include/opcode/mips.h.
4939 * Makefile.in: Add it.
4941 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4943 * m88k-dis.c: New file, moved in from gdb and changed to use the
4944 new dis-asm.h disassembler interface.
4945 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4946 (m88k-dis.o): New target.
4948 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4950 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4951 argument string const char * to correspond to opcode/mips.h.
4953 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4955 * mips-dis.c: Updated to account for name changes in new version
4957 * Makefile.in: Added header file dependencies.
4959 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4961 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4963 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4965 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4966 extend, rather than shifts.
4968 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4970 * Makefile.in: Undo 15 June change.
4972 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4974 * m68k-dis.c (print_insn_arg): Change return value to byte count
4976 * m68k-dis.c: Re-write to detect invalid operands before
4977 printing anything, so we can handle this the same way we
4978 handle invalid opcodes.
4980 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4982 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4984 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4986 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4989 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4991 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4993 * configure.in: Do make sysdep.h link.
4994 * Makefile.in: Search ../include. Don't search ../bfd.
4996 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4998 Changes from Jeff Law, law@cs.utah.edu:
4999 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5000 Do not print a space before the completers specified by
5003 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5005 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5006 defined, since gdb has been fixed.
5008 Changes from Jeff Law, law@cs.utah.edu:
5009 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5010 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5011 be a *disassemble_info, not a *FILE.
5012 * hppa-dis.c: Support 'd', '!', and 'a'.
5013 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5014 * hppa-dis.c: Delete cases which are no longer needed.
5016 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5018 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5020 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5022 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5025 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5027 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5028 * configure.in: No longer need to configure to get sysdep.h.
5030 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5032 * Patches from Jeffrey Law <law@cs.utah.edu>.
5033 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5034 templates for 1.1 FP computational instructions.
5036 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5038 * h8500-dis.c (print_insn_h8500): Address argument is type
5040 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5043 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5044 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5046 * sparc-dis.c (compare_opcodes): Move static declaration to
5049 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5051 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5052 instruction, remove unimp hack from 'l' argument.
5054 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5056 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5059 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5061 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5062 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5065 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5067 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5068 arrays of string pointers to 2-d arrays of chars, to save
5071 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5073 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5074 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5076 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5078 * hppa-dis.c: New file from Utah, adapted to new disassembler
5080 * Makefile.in: Include it.
5082 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5084 * sh-dis.c, sh-opc.h: New files.
5086 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5088 * alpha-dis.c, alpha-opc.h: New files.
5090 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5092 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5095 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5097 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5099 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5101 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5104 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5106 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5107 and double percent signs a few places.
5109 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5111 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5112 Use info->print_address_func not print_address.
5114 * dis-buf.c (generic_print_address): New function.
5116 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5118 * Makefile.in: Add sparc-dis.c.
5119 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5121 Add `add' instruction to the set that get checked
5122 for a preceding `sethi' in order to print an absolute address.
5123 * (print_insn): Disassembly prefers real instructions.
5124 (is_delayed_branch): Speed up.
5125 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5126 Still missing some float ops, and needs testing.
5127 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5128 F_ALIAS. Use printf, not fprintf, when not passing a file
5130 (compare_opcodes): Check that identical instructions have
5131 identical opcodes, complain otherwise.
5134 * Include reg_names.
5136 Use dis-asm.h/read_memory_func interface.
5138 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5140 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5141 deliberately return non-zero to setjmp from longjmp. Otherwise
5142 this code fails to compile.
5144 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5146 * m68k-dis.c: Fix prototype for fetch_arg().
5148 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5150 * dis-buf.c: New file, for new read_memory_func interface.
5151 Makefile.in (OFILES): Include it.
5152 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5153 Use new read_memory_func interface.
5155 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5157 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5158 * h8500-opc.h: Fix couple of opcodes.
5160 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5162 * Makefile.in: add dvi & installcheck targets
5164 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5166 * Makefile.in: Update for h8500-dis.c.
5168 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5170 * h8500-dis.c, h8500-opc.h: New files
5172 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5174 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5175 ../include/dis-asm.h.
5176 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5177 and ../gdb/m68k-pinsn.c).
5178 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5179 and ../gdb/i386-pinsn.c).
5180 * m68881-ext.c: New file. Moved definition of
5181 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5182 * Makefile.in: Adjust for new files.
5183 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5184 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5185 can be dis-assembled.
5187 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5189 * mips-dis.c (print_insn_arg): Now returns void.
5191 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5193 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5194 files that use the macros.
5196 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5198 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5199 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5200 (CFILES): Added mips-dis.c.
5202 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5204 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5205 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5207 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5209 * Makefile.in: Improve *clean rules.
5210 * configure.in: Allow a default host.
5212 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5214 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5215 files include other sysdep files
5217 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5219 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5221 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5223 * configure.in: For host support, use ../bfd/configure.host
5224 so it stays in sync with the ../bfd/hosts database.
5226 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5228 * configure.in: use cpu-vendor-os triple instead of nested cases
5230 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5232 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5233 *always* the wrong one.
5235 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5237 * z8kgen.c: added copyright info
5239 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5241 * z8k-dis.c (unparse_instr): prettier tabs
5242 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5244 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5246 * configure.in: Add ncr* configuration.
5247 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5248 picayune ANSI compilers happy.
5250 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5252 * configure.in (i386): Make i386 and i486 synonymous for now.
5253 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5255 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5257 * Makefile.in (install): Fix typo.
5259 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5261 * Makefile.in (make): Remove obsolete crud.
5262 (sparc-opc.o): Avoid Sun Make VPATH bug.
5264 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5266 * Makefile.in: since there are no SUBDIRS, remove rule and
5267 references of subdir_do.
5269 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5271 * Makefile.in (install): Get the library name right here too.
5272 Don't install bfd.h, since it's unrelated to this library. No
5273 subdirs to recurse into, either.
5274 (CFILES): The source file has a .c suffix, not .o.
5276 * sparc-opc.c: New file, moved from BFD.
5277 * Makefile.in (OFILES): Build it.
5279 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5281 * z8k-dis.c: fixed forward refferences of some declarations.
5283 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5285 * Makefile.in: get the name of the library right
5287 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5289 * z8k-dis.c: knows how to disassemble z8k stuff
5290 * z8k-opc.h: new file full of z8000 opcodes
5294 version-control: never
projects / external / binutils.git / blob