1 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
4 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
7 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
9 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
13 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
15 * po/opcodes.pot: Regenerate.
16 * po/POTFILES.in: Regenerate.
17 * fr30-opc.c: Regenerate.
18 * fr30-opc.h: Regenerate.
21 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
23 * m32r-asm.c: Regenerate.
26 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
28 * configure.in: Added case for bfd_fr30_arch.
29 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
30 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
31 (CLEANFILES): Added stamp-fr30.
33 * fr30-asm.c: New file.
34 * fr30-dis.c: New file.
35 * fr30-opc.c: New file.
36 * fr30-opc.h: New file.
37 * po/POTFILES.in: Regenerated
38 * po/opcodes.pot: Regenerated
42 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
44 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
45 to bcl8,bncl8 entries.
46 (macro_insn_table_entries): Add FILL_SLOT attribute
47 to bcl8r,bncl8r entries.
50 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
52 * configure.in: detect cygwin* instead of cygwin32*
53 * configure: regenerate
55 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
57 * mips-opc.c (IS_M): Added.
60 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
62 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
66 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
69 * cgen-asm.in (insert_1): New function.
70 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
71 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
72 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
73 * cgen-dis.in (extract_1): New function.
74 (extract_normal): buf_ctrl renamed to ex_info, update type.
75 Progress on handling of CGEN_INT_INSN_P.
76 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
77 Update handling of CGEN_INT_INSN_P. Handle errors from
78 @arch@_cgen_extract_operand.
79 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
80 (default_print_insn): Renamed from print_insn.
81 Handle ! CGEN_INT_INSN_P.
82 (print_insn_@arch@): Handle error returns from print_insn.
83 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
84 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
85 (@arch@_cgen_lookup_get_insn_operands): Ditto.
87 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
90 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
92 * m10300-opc.c: Allow autoincrement stores using the same register
93 for source and destination operands.
95 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
97 * m10300-opc.c: DSP instrutions which only write to one general
98 register have no restrictions on matching operands.
100 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
103 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
105 * m32r-opc.h,m32r-opc.c: Regenerate.
108 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
110 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
113 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
115 * i386-dis.c (OP_3DNowSuffix): New static function.
118 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
119 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
120 (insn_codep): New static variable.
121 (print_insn_x86): Init insn_codep after prefixes.
122 (grps): Add GRP14 entries for prefetch, prefetchw.
125 From Jeff B Epler <jepler@usgs.gov>
126 * i386-dis.c (Suffix3DNow): New table.
128 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
130 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
132 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
134 * d10v-dis.c (print_operand): If num is nonzero, then
135 add OPERAND_ACC1, not OPERAND_ACC0.
137 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
139 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
142 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
144 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
148 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
150 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
153 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
155 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
157 start-sanitize-nortel-ppc750
158 1998-09-09 Michael Meissner <meissner@cygnus.com>
160 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
163 end-sanitize-nortel-ppc750
164 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
166 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
168 (print_insn_little_arm): Detect Thumb symbols in elf object
171 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
173 * alpha-dis.c (print_insn_alpha): Use the machine type to
174 decide which PALcode set to include.
176 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
178 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
180 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
182 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
183 MSUB and MSUBS instructions.
186 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
188 * mips-opc.c: Insert contents of vu0.h, rather than including it.
190 * Makefile.am: Rebuild dependencies.
194 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
196 * ppc-opc.c (powerpc_operands): Omit parens around additions in
199 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
201 start-sanitize-coldfire
202 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
203 ColdFire, as below for mulsl and mulul.
205 end-sanitize-coldfire
206 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
207 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
208 +, -, and d for ColdFire.
210 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
211 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
212 (extract_mbe): Likewise.
214 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
216 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
218 * m10300-opc.c: First cut at UDF instructions.
220 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
222 * m32r-opc.c: Regenerate (remove semantic descriptions).
224 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
226 * arm-dis.c (print_insn_big_arm): Fix indentation.
227 (print_insn_little_arm): Likewise.
229 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
231 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
233 (print_insn_little_arm): Likewise.
235 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
237 Move all global state data into opcode table struct, and treat
238 opcode table as something that is "opened/closed".
239 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
240 (cgen_asm_init): Delete.
241 (cgen_set_parse_operand_fn): New function.
242 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
243 (cgen_dis_init): Delete.
244 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
245 (cgen_current_{opcode_table_mach,endian}): Delete.
246 start-sanitize-cygnus
247 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
248 * cgen-dis.in (all fns): Ditto.
249 * cgen-opc.in (all fns): Ditto.
251 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
253 start-sanitize-cygnus
254 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
256 * cgen-dis.in (print_normal): Split into two.
257 (print_address): New function.
258 (extract_insn_normal): Clarify insn_value arg.
259 (print_int_insn): Renamed from print_insn.
260 (print_insn): New arg.
261 (print_insn_@arch@): Open opcode table if not already done so.
262 Move reading of insn into print_insn.
265 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
267 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
271 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
273 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
274 accept an accumulator choice.
275 * m32r-opc.c,m32r-opc.h: Regenerate.
278 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
280 * m10300-opc.c: Add entries for "no_match_operands" field in
284 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
286 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
290 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
292 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
295 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
297 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
299 * m10300-opc.c: Add autoincrement memory loads/stores.
303 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
305 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
306 phmsubh respectively.
309 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
311 start-sanitize-cygnus
312 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
314 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
315 @arch_cgen_get_int_operand.
316 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
317 Update call to @arch@_cgen_insert_operand.
318 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
319 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
320 (extract_insn_normal): New arg `pc', callers updated.
321 Update call to @arch@_cgen_extract_operand.
322 (print_insn): Update call to CGEN_EXTRACT_FN.
324 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
327 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
329 * m10300-opc.c: Fix load to sp and store from sp for the am33.
330 Add more multimedia instructions.
332 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
334 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
339 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
341 * mips-opc.c (pref): Enabled for the r5900.
344 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
346 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
348 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
350 (OP_J): Remove unnecessary subtraction when 16-bit displacement
351 will be masked later.
354 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
356 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
359 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
361 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
362 from raw register #s to symbolic names to make debugging easier.
365 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
367 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
369 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
371 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
372 start-sanitize-cygnus
373 * Makefile.am (CGENDIR): Set via configure.
374 (CGEN): New variable.
375 (CGENFILES): object.scm renamed to cos.scm.
376 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
377 (stamp-m32r): Pass prefix to run-cgen.
378 * Makefile.in: Regenerate.
379 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
380 * cgen-dis.in: Ditto.
381 * cgen-opc.in: Ditto.
382 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
383 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
384 * configure: Regenerate.
388 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
390 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
392 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
394 * m10300-opc.c: Reorder more instructions so that we do not
395 accidentally match a mn10300 instruction when we really
396 wanted an am33 instruction.
399 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
401 * m10300-dis.c: Only recognize instructions from the currently
403 * m10300-opc.c: Add field indicating the particular variant of
404 the mn10300 each instruction is available on.
406 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
408 * configure.in: For bfd_vax_arch, build vax-dis.lo.
409 * Makefile.am: Rebuild dependencies.
410 (CFILES): Add vax-dis.c.
411 (ALL_MACHINES): Add vax-dis.lo.
412 * aclocal.m4: Rebuild with current libtool.
413 * configure, Makefile.in: Rebuild.
415 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
417 * vax-dis.c: New file, from work by Pauline Middelink
418 <middelin@polyware.iaf.nl>.
419 * disassemble.c (ARCH_vax): Define if ARCH_all.
420 (disassembler): Add case for ARCH_vax.
421 * makefile.vms: Support compilation on vms/vax.
424 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
426 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
427 the DVP_OPERAND_RELOC_11_S4 relocation.
431 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
433 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
435 (disassemble): Correctly handle FMT_D10 instructions.
437 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
438 am33 shift instructions.
440 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
442 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
443 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
445 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
446 (mn10300_opcodes): Reorder so as to try and select opcodes from
447 the core chip when multiple alternatives exist. Change several
448 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
449 "macbu" instructions. Fix typos in a couple DSP instructions too.
452 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
454 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
455 related to sign extension and the size of ints.
457 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
459 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
460 instructions. Support (sp) addressing mode by expanding it into
464 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
466 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
467 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
468 be used as immediate values.
472 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
474 * m10300-opc.c: Support 4 byte DSP instructions.
477 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
479 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
482 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
484 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
487 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
489 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
492 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
494 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
495 found on the mn10300.
498 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
500 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
503 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
505 * mips-dis.c (print_insn_little_mips): Previously, instruction
506 printing references the symbol table to determine whether the
507 instruction resides in a block regular instructions or mips16
508 instructions. However, when the disassembler gets used in other
509 environments where the symbol table is not present, we no longer
510 rely in the symbol table, rather, use the low bit of the
511 instructions address to guess. There should be no change for usage
512 of the disassembler in host based programse, gdb ,objdump.
513 (print_insn_big_mips): ditto.
514 (print_insn_mips): ditto
516 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
518 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
520 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
523 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
524 operands for the am33.
525 (mn10300_opcodes): Add new instructions from the am33.
527 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
529 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
531 * i386-dis.c (index16): Add '%' to register names. Use ','
534 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
536 * i386-dis.c: Don't print opcode suffix when we can figure out the
537 size (and gas can!) by register operands, or from the default
539 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
541 (dis386, dis386_twobyte, grps): Use new suffix macros.
542 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
543 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
544 order of cmps operands to agree with Intel docs. Correct operand
545 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
546 agree with Intel docs.
547 (print_insn_x86): Print orphan fwait before other prefixes.
548 Return correct byte count for orphan fwait with prefixes. Don't
549 print `bound' operands in reverse order.
550 (ckprefix): Stop accumulating prefixes if we get fwait.
551 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
553 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
555 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
556 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
558 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
560 Fix problems when bfd_vma is wider than long.
561 * i386-dis.c: Make op_address and start_pc unsigned.
562 (set_op): Make parameter unsigned.
563 (print_insn_x86): Cast to bfd_vma when passing a value to
565 * ns32k-dis.c (CORE_ADDR): Don't define.
566 (print_insn_ns32k): Change type of addr to bfd_vma. Use
567 bfd_scan_vma to read back address.
568 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
570 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
571 (NEXTULONG): New definition.
572 (print_insn_m68k): Avoid overflow when computing third argument of
574 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
575 Use disp instead of val to store offset values.
576 (print_indexed): Use base_disp instead of word to store base
577 displacement, to avoid overflow.
578 * m10300-dis.c (disassemble): Cast value to long when computing
579 pc-relative address, to get correct sign extension.
581 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
583 * m32r-opc.c: Regenerate.
585 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
587 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
588 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
590 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
592 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
594 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
596 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
598 (OP_DSreg): Rename from OP_DSSI.
599 (OP_ESreg): Rename from OP_ESDI.
600 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
602 (append_seg): Rename from append_prefix.
603 (ptr_reg): New function.
604 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
606 (PREFIX_ADDR): Rename from PREFIX_ADR.
607 (float_reg): Add non-broken opcodes for people who don't want
610 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
612 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
615 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
617 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
619 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
621 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
622 0; produce error message for shifts of size 32 (or 64 for 64-bit
623 shifts), because the hardware doesn't support them.
626 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
628 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
631 * vu0.h (sqc2): Fix opcode.
633 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
637 start-sanitize-cygnus
638 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
640 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
641 Change pinfo to use WR_HILO.
644 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
646 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
647 LONG_2, LONG_2b formats to use this new operand.
649 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
651 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
653 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
655 * sparc-dis.c (print_insn_sparc): big endian instruction / little
658 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
660 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
661 and SHORT_B3b formats to use Rb instead of Ra.
663 Add FLAG_MUL16 to MUL2XH opcode.
665 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
666 to existing 1.1.1 parallelisation prohibition procedure.
668 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
670 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
671 * cgen-dis.in (extract_normal): Likewise.
672 * m32r-asm.c,m32r-dis.c: Regenerate.
675 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
677 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
681 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
683 * mips-opc.c (multu1): Add two operand variant for the r5900.
686 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
688 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
689 with a shift count of 0.
692 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
694 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
696 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
698 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
699 (_print_insn_mips): Likewise.
700 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
704 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
706 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
707 (cgen_hw_lookup_by_num): New function.
710 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
713 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
715 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
717 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
719 * sparc-dis.c (print_insn_sparc): Always fetch instructions
720 as big-endian on SPARClite.
723 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
725 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
727 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
731 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
733 * d30v-opc.c (pre_defined_register): Remove alias for r0.
736 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
738 * mips-opc.c (break): Added 20-bit single-operand break
739 instruction for R5900 only.
742 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
744 * po/Make-in (install-info): New target.
746 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
748 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
749 * configure: Rebuild.
751 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
753 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
754 variety of ISA2 instructions to set bottom ten bits of trap code.
756 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
758 * Makefile.am (config.status): Add explicit target so that
759 config.status depends upon bfd/configure.in.
760 * Makefile.in: Rebuild.
762 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
764 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
765 instructions to set bottom ten bits of break code.
766 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
767 for above optional argument.
769 start-sanitize-cygnus
770 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
772 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
773 * m32r-opc.h: Regenerate.
776 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
778 * makefile.vms: Run dec c with /nodebug.
780 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
782 * Makefile.in: Rebuilt.
783 * Makefile.am: Regenerated dependencies with mkdep.
785 * opintl.h (_): Define as dgettext.
787 start-sanitize-cygnus
788 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
790 * configure.in: Add support for --enable-cgen-maint.
791 * Makefile.am (M32R_DEPS): New variable.
792 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
793 * aclocal.m4: Regenerate.
794 * Makefile.in: Regenerate.
795 * configure: Regenerate.
797 * Makefile.am (CGENFILES): Add minsn.scm.
800 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
802 * cgen-asm.c: Internationalised.
803 start-sanitize-cygnus
804 * cgen-asm.in: Internationalised.
805 * cgen-opc.in: Internationalised.
807 * m32r-asm.c: Internationalised.
808 * m32r-dis.c: Internationalised.
809 * m32r-opc.c: Internationalised.
811 * aclocal.m4: Regenerated.
812 * configure: Regenerated.
813 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
814 * Makefile.in: Rebuild.
815 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
816 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
818 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
820 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
822 * aclocal.m4, configure: Rebuild with current tools.
824 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
826 * opintl.h: New file - contains internationalisation macros used
827 by source files in this directory.
828 * po/: New subdirectory - contains internationalisation files.
829 * po/Make-in: New file - Makefile constructor.
830 * po/POTFILES.in: New file - list of files in opcodes directory
831 that should be scan for internationalisation macros.
832 * po/opcodes.pot: New file - list of internationisation strings
833 found in files mentioned in po/POTFILES.in.
834 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
835 entry. Add intl directory to include paths.
836 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
837 HAVE_STRCPY, HAVE_LC_MESSAGES
838 * configure.in: Add rule to build Makefile in po subdirectory.
839 * Makefile.in: Rebuilt.
840 * aclocal.m4: Rebuilt.
841 * config.in: Rebuilt.
842 * configure: Rebuilt.
843 * alpha-opc.c: Internationalised.
844 * arc-dis.c: Internationalised.
845 * arc-opc.c: Internationalised.
846 * arm-dis.c: Internationalised.
847 * cgen-asm.c: Internationalised.
848 * d30v-dis.c: Internationalised.
849 * dis-buf.c: Internationalised.
851 * dvp-dis.c: Internationalised.
852 * dvp-opc.c: Internationalised.
854 * h8300-dis.c: Internationalised.
855 * h8500-dis.c: Internationalised.
856 * i386-dis.c: Internationalised.
857 * m10200-dis.c: Internationalised.
858 * m10300-dis.c: Internationalised.
859 * m68k-dis.c: Internationalised.
860 * m88k-dis.c: Internationalised.
861 * mips-dis.c: Internationalised.
862 * ns32k-dis.c: Internationalised.
863 * opintl.h: Internationalised.
864 * ppc-opc.c: Internationalised.
865 * sparc-dis.c: Internationalised.
866 * v850-dis.c: Internationalised.
867 * v850-opc.c: Internationalised.
869 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
871 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
872 (asm_hash_table_entries): New variable.
873 (cgen_asm_init): Free asm_hash_table_entries.
874 (hash_insn_array,hash_insn_list): New functions.
875 (build_asm_hash_table): Use them. Hash macro insns as well.
876 (cgen_asm_lookup_insn): Update.
877 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
878 (dis_hash_table_entries): New variable.
879 (cgen_dis_init): Free dis_hash_table_entries.
880 (hash_insn_array,hash_insn_list): New functions.
881 (build_dis_hash_table): Use them. Hash macro insns as well.
882 (cgen_dis_lookup_insn): Update.
883 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
884 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
885 (cgen_macro_insn_count): New function.
886 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
887 All callers updated. Sanity check result of extract fn.
888 (@arch@_cgen_get_insn_operands): Change result type to void.
889 Delete args insn_value, length. New arg fields. All callers updated.
890 (@arch@_cgen_lookup_get_insn_operands): New function.
891 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
893 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
895 * i386-dis.c (OP_DSSI): Print segment override.
898 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
900 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
904 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
906 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
910 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
912 * vu0.h (vlqd, vlqi): Update per revised specs.
916 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
918 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
919 (vif_operands): Update.
920 (vif_get_unpackloc): Delete.
921 (state_vif_unpackloc{,_star_p}): Delete.
922 (dvp_opcode_init_parse): Update.
923 (vif_unpack_len_value): Avoid divide by zero.
927 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
929 * vu0.h: Specs changed for VCALLMSR bit pattern.
930 * mips-dis.c: (print_insn_arg) Matching change.
933 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
935 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
938 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
940 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
941 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
942 * configure.in: Define and substitute WIN32LDFLAGS and
944 * aclocal.m4: Rebuild with new libtool.
945 * configure, Makefile.in: Rebuild.
948 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
950 * vu0.h: Corrected bit pattern for VMAXI opcode.
953 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
955 * m32r-opc.c: Regenerate.
958 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
960 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
961 (dvp_expand_macro): Implement.
962 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
963 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
966 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
968 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
969 before trying to copy it.
970 * Makefile.in: Rebuild.
972 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
974 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
977 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
979 * m32r-opc.c: Fix bit patterns for SAT and SATB.
982 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
984 * ns32k-dis.c (bit_extract_simple): New function to extract bits
985 from an arbitrary valid buffer instead of fetching them on demand
987 (invalid_float): use bit_extract_simple() instead of bit_extract().
990 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
992 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
993 * m32r-opc.h: Add extra control registers.
996 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
998 From H.J. Lu <hjl@gnu.org>:
999 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1002 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1004 * Branched binutils 2.9.
1006 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1008 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1009 disassembling last 4 bytes of a section.
1011 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1013 Fix some gcc -Wall warnings:
1014 * arc-dis.c (print_insn): Add casts to avoid warnings.
1015 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1016 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1018 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1019 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1020 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1021 (parse_ffstreg, parse_vif_mode): Likewise.
1023 * m10200-dis.c (disassemble): Likewise.
1024 * m10300-dis.c (disassemble): Likewise.
1025 * ns32k-dis.c (print_insn_ns32k): Likewise.
1026 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1027 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1028 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1029 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1030 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1032 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1033 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1034 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1036 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1037 start-sanitize-tic80
1038 * tic80-dis.c (print_one_instruction): Likewise.
1040 * w65-dis.c (print_operand): Likewise.
1041 * z8k-dis.c (fetch_data): Likewise.
1042 * a29k-dis.c: Add return type for find_byte_func_type.
1043 * arc-opc.c: Include <stdio.h>. Remove declarations of
1044 insert_multshift and extract_multshift.
1045 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1047 (extract_value): Fully parenthesize expression.
1049 * dvp-opc.c: Include <ctype.h>.
1050 (print_sdest): Add default case to switch.
1052 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1053 * h8500-opc.h (h8500_table): Fully bracket initializer.
1054 * w65-opc.h (optable): Likewise.
1055 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1056 * i386-dis.c (OP_E): Initialize local variables.
1057 * m10200-dis.c (print_insn_mn10200): Likewise.
1058 * mips-dis.c (print_insn_mips16): Likewise.
1059 * sh-dis.c (print_insn_shx): Likewise.
1060 * v850-dis.c (print_insn_v850): Likewise.
1061 * ns32k-dis.c (print_insn_arg): Declare.
1062 (get_displacement, invalid_float): Declare.
1063 (list_search, sign_extend, flip_bytes): Declare return type.
1064 (get_displacement): Likewise.
1065 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1067 (print_insn_ns32k): Make i unsigned.
1068 (invalid_float): Make static. Declare type of val.
1069 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1070 on each for iteration.
1071 * tic30-dis.c (get_indirect_operand): Likewise.
1072 * z8k-dis.c (print_insn_z8001): Declare return type.
1073 (print_insn_z8002): Likewise.
1074 (unparse_instr): Fix sprintf format strings.
1076 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1078 * mips-opc.c: Add "sync.l" and "sync.p".
1081 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1083 * dvp-opc.c (extract_vif_datalen): Rewrite.
1084 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1086 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1088 * dvp-dis.c (print_insn): Print unpack address in hex.
1089 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1090 Don't skip over '*', just record it.
1091 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1092 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1093 Don't skip over '*', just record it.
1094 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1095 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1096 (vif_opcodes): Likewise.
1097 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1098 (vif_macros,vif_macro_count): New globals.
1099 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1100 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1101 (vif_get_wl_cl): New function.
1102 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1105 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1107 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1108 default m68k variant to recognize.
1110 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1111 (ctrl, cobr, mem, ea): Likewise.
1112 (print_addr): Likewise. Remove cast.
1113 (ea): Cast argument of print_addr to bfd_vma.
1115 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1117 (cgen_parse_unsigned_integer): Likewise.
1118 (cgen_parse_address): Likewise.
1120 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1122 * i960-dis.c (ctrl): Add full braces to structure initialization.
1123 (cobr, mem, reg): Likewise.
1124 (ea): Correct parenthesization in expression.
1126 * cgen-asm.c: Include <ctype.h>.
1127 (build_asm_hash_table): Remove unused local variable i.
1128 (cgen_parse_keyword): Add casts to avoid warnings.
1130 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1131 symbol. Fix indentation.
1132 (print_insn_little_arm): Likewise.
1134 start-sanitize-r5900
1135 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1137 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1141 start-sanitize-m32rx
1142 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1144 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1149 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1151 * dvp-opc.c (vif_operand_datalen_special): New global.
1154 start-sanitize-r5900
1155 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1157 * vu0.h (vcallms): Use 'O' for call target operand.
1158 * mips-dis.c (print_insn_arg): Handle 'O'.
1161 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1163 * configure.in: Use AM_DISABLE_SHARED.
1164 * aclocal.m4, configure: Rebuild with libtool 1.2.
1166 start-sanitize-r5900
1167 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1169 * mips-dis.c: Change '%' to '#' in r5900 support.
1173 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1175 These patches are courtesy of Jonathan Walton and Tony Thompson
1176 (athompso@cambridge.arm.com).
1178 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1181 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1182 both the offset and the label closest to the destination.
1184 start-sanitize-r5900
1185 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1187 * vu0.h: New file with cop2/vu0 instructions.
1188 * mips-opc.c: Include vu0.h.
1189 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1191 (print_insn_mips): Do not emit a tab after an instruction if the
1192 first arg is an instruction completer (&). If the next arg is an
1193 escape character (%), then print the next arg verbatim.
1194 * Makefile.am (mips-opc.lo): Depend on vu0.h
1198 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1200 * dvp-opc.c (vif_opcodes): Add stcycl.
1202 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1204 * dvp-dis.c (print_dma): Change length from 16 to 8.
1207 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1209 * m32r-opc.h: Regenerate.
1212 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1214 * dvp-opc.c (print_dest1): Print dest spec again.
1215 (print_vfreg,print_accdest): Likewise.
1216 (vif_unpack_len): Round result up to word boundary.
1219 start-sanitize-vr4320
1220 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1222 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1224 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1226 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1231 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1233 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1234 (print_insn): Do mask comparison on proper opcode word.
1235 Print unsigned values in hex.
1236 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1237 (parse_bc): Catch missing dest.
1238 (parse_vfreg): Replace atoi call with strtol.
1239 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1240 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1241 (extract_gif_eop): New function.
1242 (gif_operands): Update eop entry.
1243 (VGIFOP,VGIFNREGS): Fix calcs.
1244 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1245 (gif_regs): Add entry for unused 11 case.
1246 (print_gif_regs): Print empty list instead of nothing.
1247 (extract_gif_nloop): Fix value calc.
1248 (print_gif_nloop): Always print value, even if 0.
1249 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1250 (vif_operands): Use them for wl,cl fields.
1251 (state_vif_wl,state_vif_cl): New static locals.
1252 (parse_vif_mode): Handle numeric args.
1253 (vif_unpack_len_value,vif_unpack_len): New functions.
1254 (vif_insn_len): Call vif_unpack_len.
1257 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1259 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1261 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1263 * cgen-asm.in: Move insertion of generated routines to top of file.
1264 (insert_normal): Add prototype. Delete `shift' arg.
1265 * cgen-dis.in: Move insertion of generated routines to top of file.
1266 (extract_normal): Add prototype. Delete `shift' arg.
1267 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1268 (print_keyword): Add prototype. Fix type of `attrs' arg.
1270 start-sanitize-vr4320
1271 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1273 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1274 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1277 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1279 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1280 assume that info->symbols is non-empty.
1282 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1284 * alpha-opc.c (cvtqs) There is no such thing.
1285 (cvttq): Missing most of the /*d variants.
1287 start-sanitize-r5900
1288 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1290 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1292 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1293 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1296 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1298 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1299 delayed branches or jumps.
1302 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1304 * dvp-opc.c (vif_operands): Add unpack[u] support.
1305 (vif_opcodes): Ditto.
1306 (*_vif_imrubits): Renamed from *_vif_imrbits.
1308 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1310 * dvp-dis.c (print_insn): Handle word number.
1311 Handle mips address vs vu address.
1312 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1313 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1314 ({insert,extract}_dma_addr): Fix word ofset.
1315 ({insert,print}_gif_regs): Fix encode/decode.
1318 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1320 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1322 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1323 * tic30-dis.c (print_branch): Likewise.
1325 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1326 * dvp-dis.c (dvp_info_mach_type): New function.
1327 (print_insn_dvp): Call it.
1328 (print_vif): Return length of 4 if mpg or direct insn so following
1329 insns get properly disabled.
1330 (print_gif): Fix word order.
1331 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1332 (gif_operands): Fix word order.
1333 (gif_opcodes): Likewise.
1334 ({insert,extract,print}_gif_regs): Likewise.
1335 (gif_regs): Add new register number/name changes.
1336 (dma_opcodes): Add dmarefe insn.
1339 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1341 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1342 saved_symbol code as it is no longer needed.
1344 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1346 * cgen-asm.c: Include symcat.h.
1347 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1349 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1352 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1354 * dvp-opc.c (extra_dma_flags): Fix typos.
1355 (dma_operands): Fix word numbers.
1356 (dma_opcodes): Likewise.
1357 ({insert,extract}_dma_flags): Likewise.
1360 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1362 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1365 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1367 * dvp-dis.c (print_gif): Complete.
1368 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1369 (state_gif_{nregs,regs,nloop}): New static locals.
1370 (*_gif_*): Complete.
1371 (dvp_opcode_init_{parse,print}): Init gif state locals.
1372 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1373 (vif_insn_len): Handle `unpack'.
1374 ({insert,extract}_dma_flags): Complete.
1377 start-sanitize-r5900
1378 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1380 * mips-opc.c (mula.s): Renamed from multa.s.
1383 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1385 * m32r-opc.[ch]: Regenerate.
1388 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1390 * dvp-opc.c (dma_operands): Rewrite.
1391 (dma_operand_{count,addr}): New globals.
1392 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1393 (insert_dma_addr): Insert value into insn.
1394 (extract_dma_addr): Extract value from insn.
1396 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1398 * dvp-dis.c (print_vu): Handle loi insns.
1399 (print_insn): Likewise.
1400 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1401 (vu_operands): Make LDEST1 a FAKE operand.
1402 (parse_dest1): Allow elided argument.
1403 (print_dest1): Don't print the argument.
1405 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1408 (print_vfreg): Don't print dest spec.
1409 (parse_accdest): Dest spec is optional.
1410 (print_accdest): Don't print dest spec.
1413 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1415 * Makefile.am (CGENFILES): Update.
1416 * Makefile.in: Regenerate.
1417 * cgen-asm.in (insert_normal): Result is error message now.
1418 Validate value to be inserted.
1419 (insert_insn_normal): Result is error message now.
1420 (@arch@_cgen_assemble_insn): Update.
1421 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1422 arguments. Don't perform validation here.
1423 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1425 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1427 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1428 operand instance list.
1429 * m32r-opc.c: Regenerate.
1431 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1433 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1434 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1436 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1438 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1440 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1442 * configure.in: Get the version number from BFD.
1443 * configure: Rebuild.
1445 From H.J. Lu <hjl@gnu.org>:
1446 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1447 * Makefile.in: Rebuild.
1449 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1451 * m32r-opc.c: Regenerate.
1452 * m32r-opc.h: Regenerate.
1454 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1456 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1457 Ignore ALIAS insns if asked to.
1458 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1459 * m32r-opc.c: Regenerate.
1462 * dvp.opc.c: Nicely format opcode tables.
1463 (vu_operands): New element UFLAGS.
1464 (parse_uflags,print_uflags): New functions.
1465 (vu_upper_opcodes): Add UFLAGS to all insns.
1468 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1470 Fix rac to accept only a0:
1471 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1472 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1473 Introduce OPERAND_GPR.
1474 * d10v-dis.c (print_operand): Likewise.
1476 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1478 * cgen-opc.in: New file.
1479 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1480 * Makefile.am (CGENFILES): Add cgen-opc.in.
1481 * Makefile.in: Regenerate.
1483 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1484 (cgen_hw_lookup): Make result const.
1486 * cgen-dis.in (*): Use PTR instead of void *.
1487 (print_insn): Delete unused vars `i', `syntax'.
1489 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1492 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1494 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1495 (vif_opcodes): Update renamed insns.
1496 * dvp-dis.c (*): Likewise.
1499 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1501 * configure, aclocal.m4: Rebuild with new libtool.
1503 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1505 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1506 instructions use a PC relative branch, not absolute.
1508 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1510 * configure.in: Set libtool_enable_shared rather than
1511 libtool_shared. Remove diversion hack.
1512 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1514 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1516 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1517 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1519 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1521 * tic30-dis.c: New file.
1522 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1523 * configure.in: Handle bfd_tic30_arch.
1524 * Makefile.am: Rebuild dependencies.
1525 (CFILES): Add tic30-dis.c
1526 (ALL_MACHINES): Add tic30-dis.lo.
1527 * configure, Makefile.in: Rebuild.
1529 start-sanitize-m32rx
1530 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1532 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1533 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1534 macwhi-a and macwlo-a instructions.
1538 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1540 * dvp-opc.c, fixed encoding of a bunch of instructions to
1541 be consistent with the asmvu assembler (and inconsistent
1542 with the specification).
1544 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1546 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1547 in the opcode table. The pkemscalf instruction must come first.
1549 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1551 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1554 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1556 * m32r-opc.h (HAVE_CPU_M32R): Define.
1559 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1561 * dvp-dis.c, dvp-opc.c: New files.
1562 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1563 * configure: Regenerate.
1564 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1565 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1566 (mips-dis.lo): Compile with @archdefs@.
1567 * Makefile.in: Regenerate.
1568 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1569 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1572 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1574 * v850-opc.c (insertion routines): If both alignment and size is
1575 wrong then report this.
1577 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1579 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1580 Only recognize instructions for the current target_processor.
1582 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1584 * d10v-dis.c (PC_MASK): Correct value.
1585 (print_operand): If there's a reloc, don't calculate the
1586 address because they could be in different sections.
1588 start-sanitize-cygnus
1589 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1591 * cgen.sh: Rewrite to be like simulator's version.
1592 * Makefile.am (cgen): Update call to cgen.sh.
1593 * Makefile.in: Regenerate
1596 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1598 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1599 instruction after the 4650's "mul" instruction; nobody's using the
1600 4010 these days. If object files someday indicate which processor
1601 variant they're intended for, we can do a better job at this.
1603 start-sanitize-r5900
1604 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1606 * mips-opc.c (c.lt.s): Add r5900 variant.
1610 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1612 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1613 table provided entry size. Use CGEN_INSN_MNEMONIC.
1614 (cgen_parse_keyword): Rewrite.
1615 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1616 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1617 * cgen-opc.c: Clean up pass over `struct foo' usage.
1618 (cgen_keyword_lookup_value): Handle "" entry.
1619 (cgen_keyword_add): Likewise.
1620 start-sanitize-cygnus
1621 * Makefile.am: Add cgen support.
1622 * Makefile.in: Regenerate.
1623 * configure.in: Add cgen support.
1624 * configure: Regenerate.
1625 * aclocal.m4: Regenerate.
1626 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1629 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * mips-opc.c: Add FP_D to s.d instruction flags.
1633 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1635 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1637 start-sanitize-tic80
1638 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1640 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1641 PC relative offset forms before the 15 bit forms. An assembler command
1642 line option now chooses the default.
1645 start-sanitize-r5900
1646 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1648 * mips-opc.c: Add many missing r5900 instructions.
1651 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1653 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1654 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1656 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1658 * configure: Only build libopcodes shared if --enable-shared's value
1659 was `yes', or was set to `*opcodes*'.
1660 * aclocal.m4: Likewise.
1661 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1662 original source of this bit of code. It's not clear what the best fix
1665 start-sanitize-r5900
1666 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1668 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1670 start-sanitize-tic80
1671 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1673 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1674 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1675 offset forms before the 15 bit forms, to default to the long forms.
1678 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1680 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1682 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1684 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1685 symbol if none is present.
1686 (print_insn_big_arm): Prevent examination of stored symbol if
1689 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1691 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1693 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1695 * disassemble.c: Remove disasm_symaddr() function.
1697 * arm-dis.c: Use info->symbol instead of info->flags to determine
1698 if disassmbly should be in Thumb or Arm mode.
1700 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1702 * arm-dis.c: Add support for disassembling Thumb opcodes.
1703 (print_insn_thumb): New function.
1705 * disassemble.c (disasm_symaddr): New function.
1707 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1708 (thumb_opcodes): Table of Thumb opcodes.
1710 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1712 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1714 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1715 and 'v' as operand types.
1717 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1719 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1720 <olivier.carmona@di.epfl.ch>.
1721 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1722 which has a two word opcode with a one word argument.
1724 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1726 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1727 unsigned, not signed.
1728 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1730 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1732 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1733 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1734 (ftrv): Slay the cut-and-paste monster.
1736 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1738 * d10v-dis.c (print_operand):
1739 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1741 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1743 * d10v-opc.c (OPERAND_FLAG): Split into:
1744 (OPERAND_FFLAG, OPERAND_CFLAG) .
1748 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1750 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1751 field for all INSN_MACRO's.
1752 * mips16-opc.c: same
1754 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1756 * mips-opc.c (sync,cache): These are 3900 insns.
1758 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1760 sh-opc.h (sh_table): Remove ftst/nan.
1762 start-sanitize-cygnus
1763 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1765 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1766 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1768 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1772 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1774 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1775 Add tx49 insns and configury.
1778 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1780 * mips-opc.c (ffc, ffs): Fix mask.
1782 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1784 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1787 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1789 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1790 start-sanitize-cygnus
1791 Added VR5400 instructions.
1792 (N5): New cpu-id macro.
1794 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1796 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1798 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1799 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1801 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1803 * v850-dis.c (disassemble): Replace // with /* ... */
1805 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1807 * sparc-opc.c: Add wr & rd for v9a asr's.
1808 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1809 (v9a_asr_reg_names): New variable.
1810 Patch from David Miller <davem@vger.rutgers.edu>.
1812 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1814 * sparc-opc.c (v9notv9a): New insn type.
1815 (IMPDEP): Move to the end to not conflict with edge8 et al.
1816 Patch from David Miller <davem@vger.rutgers.edu>.
1818 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1820 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1822 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1824 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1826 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1828 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1829 of disassemble_info structure to determine if an overlay address
1830 has a matching symbol in low memory.
1832 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1833 new symbol_at_address_func field in disassemble_info structure.
1835 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1837 * v850-opc.c (extract_d22): Use signed arithmatic.
1839 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1841 * mips-opc.c: Three op mult is not an ISA insn.
1843 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1845 * mips-opc.c: Fix formatting.
1847 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1849 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1850 than assuming that char is signed. Explicitly sign extend 16 bit
1851 values, rather than assuming that short is 16 bits.
1852 (OP_sI, OP_J, OP_DIR): Likewise.
1854 start-sanitize-v850e
1855 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1857 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1861 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1863 * v850-opc.c: Fix typo in comment.
1865 * v850-dis.c (disassemble): Add test of processor type when
1866 determining opcodes.
1868 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1870 * configure.in: Use a diversion to set enable_shared before the
1871 arguments are parsed.
1872 * configure: Rebuild.
1874 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1876 * m68k-opc.c (TBL1): Use ! rather than `.
1877 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1879 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1881 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1883 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1885 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1888 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1889 * aclocal.m4: Rebuild with new libtool.
1890 * configure: Rebuild.
1892 start-sanitize-v850e
1893 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1895 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1898 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1900 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1902 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1904 * v850-opc.c (v850_opcodes): Further rearrangements.
1906 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1908 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1910 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1912 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1915 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1917 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1919 * mips16-opc.c: Added mips16 sdbbp.
1922 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1924 * v850-opc.c: Initialise processors field of v850_opcode structure.
1926 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1928 Merge changes from Martin Hunt:
1930 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1932 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1933 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1934 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1936 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1938 * d30v-dis.c (print_insn): First operand of d*i (delayed
1939 branch) instructions is relative.
1941 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1942 (d30v_operand_table): Add IMM6S3 type.
1943 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1945 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1946 and cmp instructions.
1948 * d30v-opc.c: Correct entries for repeat*, and sat*.
1949 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1950 types. Correct several formats.
1952 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1954 * d30v-opc.c (pre_defined_registers): Change control registers.
1956 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1957 SHORT_C2. Manual was incorrect.
1959 * d30v-dis.c (lookup_opcode): Return value now indicates
1960 if an opcode has a short and a long form. Used for deciding
1961 to append a ".s" or ".l".
1962 (print_insn): Append a ".s" to an instruction if it is
1963 the short form and ".l" if it is a long form. Do not append
1964 anything if the instruction has only one possible size.
1966 * d30v-opc.c: Change mulx2h to require an even register.
1967 New form: SHORT_A2; a SHORT_A form that needs an even
1968 register as the first operand.
1970 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1971 instruction was not being disassembled if there were an odd
1972 number of instructions.
1974 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1976 start-sanitize-v850e
1977 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1979 * v850-dis.c (disassemble): Improved display of register lists.
1982 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1984 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1985 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1986 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1987 fandnot1s, fandnot2s.
1989 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1991 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1993 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1995 * cgen-asm.c (cgen_parse_address): New argument resultp.
1996 All callers updated.
1997 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1999 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2001 * mn10200-dis.c (disassemble): PC relative instructions are
2002 relative to the next instruction, not the current instruction.
2004 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2006 * v850-dis.c (disassemble): Only signed extend values that are not
2007 returned by extract functions.
2008 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2010 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2012 * v850-opc.c: Update comments. Remove use of
2013 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2015 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2017 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2019 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2021 * configure: Rebuilt with latest devo autoconf for NT support.
2023 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2025 * v850-dis.c (disassemble): Use curly brace syntax for register
2028 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2029 where r0 is being used as a destination register.
2031 start-sanitize-v850e
2032 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2034 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2037 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2039 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2040 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2041 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2042 Add insns to access SGR and DBR.
2043 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2045 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2047 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2049 start-sanitize-v850e
2050 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2052 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2053 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2056 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2058 * configure (cgen_files): Add support for v850e target.
2059 * configure.in (cgen_files): Add support for v850e target.
2061 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2063 * configure (cgen_files): Add support for v850ea target.
2064 * configure.in (cgen_files): Add support for v850ea target.
2067 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2069 * configure.in (bfd_arc_arch): Add.
2070 * configure: Rebuild.
2071 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2072 * Makefile.in: Rebuild.
2073 * arc-dis.c, arc-opc.c: New files.
2074 * disassemble.c (ARCH_all): Define ARCH_arc.
2075 (disassembler): Add ARC support.
2077 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2079 start-sanitize-v850e
2080 * v850-dis.c (disassemble): Add support for v850EA instructions.
2082 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2083 (v850_opcodes): Add v850EA instructions.
2085 * v850-dis.c (disassemble): Add support for v850E instructions.
2087 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2088 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2089 insert_spe, extract_spe): New Functions.
2090 (v850_opcodes): Add v850E instructions.
2093 * v850-opc.c: Reorganised and re-layed out to improve readability
2096 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2098 * configure: Rebuild with autoconf 2.12.1.
2100 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2102 * aclocal.m4, configure: Rebuild with new automake patches.
2104 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2107 * acinclude.m4: Just include acinclude.m4 from BFD.
2108 * aclocal.m4, configure: Rebuild.
2110 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2112 * Makefile.am: New file, based on old Makefile.in.
2113 * acconfig.h: New file.
2114 * acinclude.m4: New file.
2115 * stamp-h.in: New file.
2116 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2117 Removed shared library handling; now handled by libtool. Replace
2118 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2119 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2120 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2121 handling in AC_OUTPUT.
2122 * dep-in.sed: Change .o to .lo.
2123 * Makefile.in: Now built with automake.
2124 * aclocal.m4: Now built with aclocal.
2125 * config.in, configure: Rebuild.
2127 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2129 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2131 start-sanitize-r5900
2132 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2134 * mips-opc.c: Fix coding of mtsa.
2137 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2139 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2141 * sparc-dis.c (sorted_opcodes): New static local.
2142 (struct opcode_hash): `opcode' is pointer to const element.
2143 (build_hash): First arg is now table of sorted pointers.
2144 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2145 (compare_opcodes): Update.
2147 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2149 * cgen-opc.c: #include <ctype.h>.
2150 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2151 Handle case insensitive hashing.
2152 (hash_keyword_value): Change type of `value' to unsigned int.
2154 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2156 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2157 precision FP, mark it as such. Likewise for double precision
2158 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2160 start-sanitize-r5900
2161 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2164 start-sanitize-r5900
2165 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2167 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2168 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2171 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2173 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2175 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2176 nesting depth when all the macros are expanded.
2178 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2180 * sparc-opc.c: The fcmp v9a instructions take an integer register
2181 as a destination, not a floating point register. From Christian
2182 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2184 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2186 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2187 syntax. From Roman Hodek
2188 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2190 * i386-dis.c (twobyte_has_modrm): Fix pand.
2192 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2194 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2196 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2198 * arm-dis.c: Add prototypes for arm_decode_shift and
2201 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2203 * mips-opc.c: Add r3900 insns.
2205 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2207 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2208 print delay slot instructions on the same line. When using a PC
2209 relative load, add a comment with the value being loaded if it can
2212 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2214 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2215 to pushS/popS for segment regs and byte constant so that
2216 pushw/popw printed when in 16 bit data mode.
2218 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2219 print cbtw, cwtd in 16 bit data mode.
2220 * i386-dis.c (putop): extra case W to support above.
2222 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2223 address size prefix in 16 bit address mode.
2225 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2227 * sh-dis.c: Reindent. Rename local variable fprintf to
2230 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2232 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2234 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2236 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2238 * mips16-opc.c (mip16_opcodes): same.
2240 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2242 * m68k-opc.c (moveb): Change $d to %d.
2244 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2246 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2247 (twobyte_has_modrm): Likewise.
2249 (OP_MMX, OP_EM, OP_MS): New static functions.
2251 * i386-dis.c: Revert patch of April 4. The output now matches
2254 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2256 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2259 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2261 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2263 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2265 * Makefile.in (install): Depend upon installdirs.
2266 (installdirs): New target.
2268 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2270 From Thomas Graichen <graichen@rzpd.de>:
2271 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2272 * configure: Rebuild.
2274 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2276 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2277 Delete string{,s}.h support.
2279 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2281 * cgen-asm.c (cgen_parse_operand_fn): New global.
2282 (cgen_parse_{{,un}signed_integer,address}): Update call to
2283 cgen_parse_operand_fn.
2284 (cgen_init_parse_operand): New function.
2285 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2286 from cgen_asm_init_parse.
2287 (m32r_cgen_assemble_insn): New operand `errmsg'.
2288 Delete call to as_bad, return error message to caller.
2289 (m32r_cgen_asm_hash_keywords): #if 0 out.
2291 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2293 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2295 [case 'J']: Fix typo in register name.
2297 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2299 * configure.in: Substitute SHLIB_LIBS.
2300 * configure: Rebuild.
2301 * Makefile.in (SHLIB_LIBS): New variable.
2302 ($(SHLIB)): Use $(SHLIB_LIBS).
2304 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2306 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2308 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2310 * disassemble.c (disassembler): Handle m32r.
2312 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2314 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2315 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2316 * Makefile.in (CFILES): Add them.
2317 (ALL_MACHINES): Add them.
2318 (dependencies): Regenerate.
2319 * configure.in (cgen_files): New variable.
2320 (bfd_m32r_arch): Add entry.
2321 * configure: Regenerate.
2323 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2325 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2326 * configure: Rebuild.
2328 * Makefile.in: Rebuild dependencies.
2330 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2332 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2335 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2337 * Branched binutils 2.8.
2339 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2341 * m10200-dis.c: Rename from mn10200-dis.c.
2342 * m10200-opc.c: Rename from mn10200-opc.c.
2343 * m10300-dis.c: Rename from mn10300-dis.c
2344 * m10300-opc.c: Rename from mn10300-opc.c.
2345 * Makefile.in: Update accordingly.
2347 * mips16-opc.c: Add mul and dmul macros.
2349 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2351 * makefile.vms: Update CFLAGS, add clean target.
2353 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2355 * mips-opc.c: Add "wait". From Ralf Baechle
2356 <ralf@gnu.ai.mit.edu>.
2358 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2359 * configure, config.in: Rebuild.
2360 * sysdep.h: Include <stdlib.h> if it exists.
2361 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2363 * Makefile.in: Rebuild dependencies.
2365 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2367 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2368 Andrew Bray <andy@madhouse.demon.co.uk>.
2370 * mips-opc.c: Add cast when setting mips_opcodes.
2372 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2374 * v850-dis.c (disassemble): Fix sign extension problem.
2375 * v850-opc.c (extract_d*): Fix sign extension problems to make
2376 disassembly calculate branch offsets correctly.
2378 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2380 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2382 * mips-opc.c: Add dctr and dctw.
2384 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2386 * d30v-dis.c (print_insn): Change the way signed constants
2389 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2391 * Makefile.in (BFD_H): New variable.
2392 (HFILES): New variable.
2393 (CFILES): Add all C files.
2394 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2395 Delete old dependencies, and build new ones.
2396 * dep-in.sed: New file.
2398 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2400 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2402 start-sanitize-coldfire
2403 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2405 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2408 end-sanitize-coldfire
2409 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2411 * mn10200-opc.c: Change "trap" to "syscall".
2412 * mn10300-opc.c: Add new "syscall" instruction.
2414 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2416 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2417 mulul insns on the coldfire.
2419 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2421 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2422 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2423 (print_insn_little_arm): Likewise.
2425 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2427 Based on patches from H.J. Lu <hjl@lucon.org>:
2428 * i386-dis.c (fetch_data): Add prototype.
2429 * m68k-dis.c (fetch_data): Add prototype.
2430 (dummy_print_address): Add prototype. Make static.
2431 * ppc-opc.c (valid_bo): Add prototype.
2432 * sparc-dis.c (build_hash_table): Add prototype.
2433 (is_delayed_branch, compute_arch_mask): Add prototypes.
2434 (print_insn_sparc): Make several local variables const.
2435 (compare_opcodes): Change arguments to const PTR. Add prototype.
2436 * sparc-opc.c (arg): Change name field to be const.
2437 (lookup_name, lookup_value): Add prototypes. Change table and
2438 name parameters to be const.
2439 (sparc_encode_asi): Change name parameter to be const.
2440 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2441 (sparc_encode_sparclet_cpreg): Likewise.
2442 (sparc_decode_asi): Change return type to be const.
2443 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2444 (sparc_decode_sparclet_cpreg): Likewise.
2446 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2448 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2449 Solaris doesn't like the combined options, and the -f is
2451 (stamp-tshlink, install): Likewise.
2453 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2455 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2458 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2460 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2462 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2464 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2467 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2469 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2471 start-sanitize-tic80
2472 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2474 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2476 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2478 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2481 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2483 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2484 floatformat_to_double to make portable.
2485 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2488 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2490 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2491 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2493 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2495 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2496 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2498 start-sanitize-tic80
2499 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2501 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2502 (OFF_SL_BR_SCALED): ... to this, and added the flag
2503 TIC80_OPERAND_BASEREL to the flags word.
2504 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2508 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2510 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2511 Change mips_opcodes from const array to a pointer,
2512 and change bfd_mips_num_opcodes from const int to int,
2513 so that we can increase the size of the mips opcodes table
2516 start-sanitize-tic80
2517 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2520 store BITNUM values in the table in one's complement form
2521 to match behavior when assembler is given a raw numeric
2522 value for a BITNUM operand.
2523 * tic80-dis.c (print_operand_bitnum): Ditto.
2526 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2528 * d30v-opc.c: Removed references to FLAG_X.
2530 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2532 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2534 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2536 * Makefile.in: Added d30v object files.
2537 * configure: (bfd_d30v_arch) Rebuilt.
2538 * configure.in: (bfd_d30v_arch) Added new case.
2539 * d30v-dis.c: New file.
2540 * d30v-opc.c: New file.
2541 * disassemble.c (disassembler) Add entry for d30v.
2543 start-sanitize-tic80
2544 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2546 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2547 representations for the floating point BITNUM values.
2549 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2551 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2552 in the table in one's complement form, as they appear in the
2554 (tic80_symbol_to_value): Use macros to access predefined
2556 (tic80_value_to_symbol): Ditto.
2557 (tic80_next_predefined_symbol): New function.
2558 * tic80-dis.c (print_operand_bitnum): Remove code that did
2559 one's complement for BITNUM values.
2562 start-sanitize-r5900
2563 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2565 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2568 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2570 * makefile.vms: Remove 8 bit characters. Update to latest
2573 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2575 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2577 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2579 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2580 (IMM24_PCREL): Likewise.
2582 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2584 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2585 address for an extended PC relative instruction that is not a
2588 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2590 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2593 start-sanitize-tic80
2594 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2596 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2597 (tic80_opcodes): Sort entries so that long immediate forms
2598 come after short immediate forms, making it easier for
2599 assembler to select the right one for a given operand.
2602 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2604 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2606 (print_insn_mips16): Likewise.
2608 start-sanitize-r5900
2609 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2611 * mips-opc.c: add r5900.
2614 start-sanitize-tic80
2615 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2617 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2618 a symbol class that restricts translation to just that
2619 class (general register, condition code, etc).
2621 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2623 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2624 and REG_DEST_E for register operands that have to be
2625 an even numbered register. Add REG_FPA for operands that
2626 are one of the floating point accumulator registers.
2627 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2628 (tic80_opcodes): Change entries that need even numbered
2629 register operands to use the new operand table entries.
2630 Add "or" entries that are identical to "or.tt" entries.
2633 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2635 * mips16-opc.c: Add new cases of exit instruction for
2637 * mips-dis.c (print_mips16_insn_arg): Display floating point
2638 registers in operands of exit instruction. Print `$' before
2639 register names in operands of entry and exit instructions.
2641 start-sanitize-tic80
2642 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2644 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2645 pairs for all predefined symbols recognized by the assembler.
2646 Also used by the disassembling routines.
2647 (tic80_symbol_to_value): New function.
2648 (tic80_value_to_symbol): New function.
2649 * tic80-dis.c (print_operand_control_register,
2650 print_operand_condition_code, print_operand_bitnum):
2651 Remove private tables and use tic80_value_to_symbol function.
2654 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2656 * d10v-dis.c (print_operand): Change address printing
2657 to correctly handle PC wrapping. Fixes PR11490.
2659 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2661 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2664 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2666 * mips-dis.c (print_insn_mips16): Set insn_info information.
2667 (print_mips16_insn_arg): Likewise.
2669 * mips-dis.c (print_insn_mips16): Better handling of an extend
2670 opcode followed by an instruction which can not be extended.
2672 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2674 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2675 coldfire moveb instruction to not allow an address register as
2676 destination. Although the documentation does not indicate that
2677 this is invalid, experiments uncovered unexpected behavior.
2678 Added a comment explaining the situation. Thanks to Andreas
2679 Schwab for pointing this out to me.
2681 start-sanitize-tic80
2682 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2684 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2685 entries are presorted so that entries with the same mnemonic are
2686 adjacent to each other in the table. Sort the entries for each
2687 instruction so that this is true.
2690 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2692 * m68k-dis.c: Include <libiberty.h>.
2693 (print_insn_m68k): Sort the opcode table on the most significant
2694 nibble of the opcode.
2696 start-sanitize-tic80
2697 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2699 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2700 "vsub", "vst", "xnor", and "xor" instructions.
2701 (V_a1): Renamed from V_a, msb of accumulator reg number.
2702 (V_a0): Add macro, lsb of accumulator reg number.
2704 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2706 * tic80-dis.c (print_insn_tic80): Broke excessively long
2707 function up into several smaller ones and arranged for
2708 the instruction printing function to be callable recursively
2709 to print vector instructions that have both a load and a
2710 math instruction packed into a single opcode.
2711 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2712 to explain why it comes after the other vector opcodes.
2715 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2717 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2718 move insns to handle immediate operands.
2720 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2722 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2723 fix operand mask in the "moveml" entries for the coldfire.
2725 start-sanitize-tic80
2726 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2728 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2729 New macros for building vector instruction opcodes.
2730 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2731 FMT_LI, which were unused. The field is now a flags field.
2732 Remove some opcodes that are possible, but illegal, such
2733 as long immediate instructions with doubles for immediate
2734 values. Add "vadd" and "vld" instructions.
2736 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2738 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2739 the order more logical. Move the shift alias instructions ("rotl",
2740 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2741 interspersed with the regular sr.x and sl.x instructions. Add
2742 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2743 "sub", "subu", "swcr", and "trap".
2745 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2747 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2748 (OFF_SL_PC): Renamed from OFF_SL.
2749 (OFF_SS_BR): New operand type for base relative operand.
2750 (OFF_SL_BR): New operand type for base relative operand.
2751 (REG_BASE): New operand type for base register operand.
2752 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2753 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2754 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2756 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2757 10 char field, padded with spaces on rhs, rather than a string
2758 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2759 than old TIC80_OPERAND_RELATIVE. Add support for new
2760 TIC80_OPERAND_BASEREL flag bit.
2762 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2764 * tic80-dis.c (print_insn_tic80): Print floating point operands
2766 * tic80-opc.c (SPFI): Add single precision floating point
2767 immediate operand type.
2768 (ROTATE): Add rotate operand type for shifts.
2769 (ENDMASK): Add for shifts.
2770 (n): Macro for the 'n' bit.
2771 (i): Macro for the 'i' bit.
2772 (PD): Macro for the 'PD' field.
2773 (P2): Macro for the 'P2' field.
2774 (P1): Macro for the 'P1' field.
2775 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2779 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2781 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2782 adding in current address for pc-relative operands.
2784 start-sanitize-tic80
2785 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2787 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2788 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2789 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2790 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2791 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2792 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2793 (REG_SCALED, LSI_SCALED): New operand types.
2794 (E): New macro for 'E' bit at bit 27.
2795 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2796 opcodes, including the various size flavors (b,h,w,d) for
2797 the direct load and store instructions.
2799 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2801 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2803 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2804 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2805 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2806 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2807 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2808 masks with "MASK_* & ~M_*" to get the M bit reset.
2809 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2811 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2813 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2814 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2815 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2817 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2818 CC, SICR, and LICR table entries.
2819 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2820 "bcnd", and "brcr" opcodes.
2823 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2825 * ppc-opc.c (powerpc_operands): Make comment match the
2826 actual fields (no shift field).
2827 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2828 start-sanitize-tic80
2829 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2830 partial implementation, work in progress.
2831 * tic80-opc.c (tic80_operands): Begin construction operands table.
2832 (tic80_opcodes): Continue populating opcodes table and start
2833 filling in the operand indices.
2834 (tic80_num_opcodes): Add this.
2837 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2839 * m68k-opc.c: Add #B case for moveq.
2841 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2843 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2844 before they are used.
2846 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2848 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2849 for "breakpoint" instruction.
2851 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2853 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2854 (dep): Use ALL_CFLAGS rather than CFLAGS.
2856 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2858 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2861 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2863 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2864 start-sanitize-tic80
2865 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2868 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2870 * mips16-opc.c: Add "abs".
2872 start-sanitize-tic80
2873 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2875 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2876 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2877 (disassembler): Add bfd_arch_tic80 support to set disassemble
2878 to print_insn_tic80.
2879 * tic80-dis.c (print_insn_tic80): Add stub.
2881 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2883 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2884 * configure: Regenerate with autoconf.
2885 * tic80-dis.c: Add file.
2886 * tic80-opc.c: Add file.
2889 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2891 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2893 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2895 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2896 (mn10200_opcodes): Use it for some logicals and btst insns.
2897 Add "break" and "trap" instructions.
2899 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2901 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2903 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2905 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2906 relative load or add now depends upon whether the instruction is
2909 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2911 * mn10200-dis.c: Finish writing disassembler.
2912 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2913 Fix mask for "jmp (an)".
2915 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2916 handle endianness issues for mn10300.
2918 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2920 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2922 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2923 instruction. Fix opcode field for "movb (imm24),dn".
2925 * mn10200-opc.c (mn10200_operands): Fix insertion position
2928 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2930 * mn10200-opc.c: Create mn10200 opcode table.
2931 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2932 but moving along nicely.
2934 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2936 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2938 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2940 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2941 specifiers for fmovem* instructions.
2943 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2945 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2947 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2949 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2952 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2954 * mn10300-opc.c: Add some comments explaining the various
2957 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2959 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2961 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2964 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2965 operand specifiers in fmovm* instructions.
2967 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2969 * ppc-opc.c (insert_li): Give an error if the offset has the two
2970 least significant bits set.
2972 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2974 * mips-dis.c (print_insn_mips16): Separate the instruction from
2975 the arguments with a tab, not a space.
2977 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2979 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2982 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2985 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2987 * configure: Rebuild with autoconf 2.12.
2989 Add support for mips16 (16 bit MIPS implementation):
2990 * mips16-opc.c: New file.
2991 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2992 (mips16_reg_names): New static array.
2993 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2994 after seeing a 16 bit symbol.
2995 (print_insn_little_mips): Likewise.
2996 (print_insn_mips16): New static function.
2997 (print_mips16_insn_arg): New static function.
2998 * mips-opc.c: Add jalx instruction.
2999 * Makefile.in (mips16-opc.o): New target.
3000 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3001 * configure: Rebuild.
3003 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3005 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3006 operand specifiers in *save, *restore and movem* instructions.
3008 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3011 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3012 register operands for immediate arithmetic, not, neg, negx, and
3013 set according to condition instructions.
3015 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3016 specifier of the effective-address operand in immediate forms of
3017 arithmetic instructions. The specifier for the immediate operand
3018 notes how and where the constant will be stored.
3020 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3022 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3025 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3028 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3030 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3032 * mn10300-dis.c (disassemble): Handle register lists.
3034 * mn10300-opc.c: Fix handling of register list operand for
3035 "call", "ret", and "rets" instructions.
3037 * mn10300-dis.c (disassemble): Print PC-relative and memory
3038 addresses symbolically if possible.
3039 * mn10300-opc.c: Distinguish between absolute memory addresses,
3040 pc-relative offsets & random immediates.
3042 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3044 (disassemble): Handle SPLIT and EXTENDED operands.
3046 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3048 * mn10300-dis.c: Rough cut at printing some operands.
3050 * mn10300-dis.c: Start working on disassembler support.
3051 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3053 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3055 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3057 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3059 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3061 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3063 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3064 register argument is calls and jmp instructions.
3066 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3068 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3069 getx operand. Fix opcode for mulqu imm,dn.
3071 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3073 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3074 in MN10300_OPERAND_SPLIT operands for how many bits
3075 appear in the basic insn word. Add IMM32_HIGH24,
3076 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3077 (mn10300_opcodes): Use new operands as needed.
3079 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3080 for bset, bclr, btst instructions.
3081 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3083 * mn10300-opc.c (mn10300_operands): Remove many redundant
3084 operands. Update opcode table as appropriate.
3085 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3086 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3088 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3090 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3091 operands (for indexed load/stores). Fix bitpos for DI
3092 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3093 few instructions that insert immediates/displacements in the
3094 middle of the instruction. Add IMM8E for 8 bit immediate in
3095 the extended part of an instruction.
3096 (mn10300_operands): Use new opcodes as appropriate.
3098 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3100 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3101 sequential so the assembler never parallelizes it with
3104 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3106 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3107 a data/address register that appears in register field 0
3108 and register field 1.
3109 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3111 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3113 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3114 standard disassembly.
3116 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3117 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3118 Recategorize PALcode instructions.
3120 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3122 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3124 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3126 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3127 there are no operand types.
3129 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3131 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3133 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3135 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3137 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3139 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3141 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3142 and sst.w instructions.
3144 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3147 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3149 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3152 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3154 * ppc-opc.c (PPCPWR2): Define.
3155 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3158 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3160 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3161 field for movhu instruction.
3163 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3164 cast value to "long" not "signed long" to keep hpux10
3167 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3169 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3172 * mn10300-opc.c (FMT*): Remove definitions.
3174 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3175 for shift-by-register opcodes.
3177 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3178 into [AD][MN][01] for encoding the position of the register
3181 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3183 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3184 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3186 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3188 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3189 Fix various typos. Add "PAREN" operand.
3190 (MEM, MEM2): Define.
3191 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3192 operands. Fix several typos.
3194 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3197 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3199 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3200 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3202 (mn10300_opcodes): Break opcode format out into its own field.
3203 Update many operand fields to deal with signed vs unsigned
3204 issues. Fix one or two typos in the "mov" instruction
3205 opcode, mask and/or operand fields.
3207 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3209 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3210 m68851 wasn't reset.
3212 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3214 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3215 all opcodes. Very rough cut at operands for all opcodes.
3217 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3220 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3222 * mn10200-opc.c, mn10300-opc.c: New files.
3223 * mn10200-dis.c, mn10300-dis.c: New files.
3224 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3225 * disassemble.c: Break mn10x00 support into 10200 and 10300
3227 * configure.in: Likewise.
3228 * configure: Rebuilt.
3230 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3232 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3234 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3236 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3238 * disassemble (ARCH_mn10x00): Define.
3239 (disassembler): Handle bfd_arch_mn10x00.
3240 * configure.in: Recognize bfd_mn10x00_arch.
3241 * configure: Rebuilt.
3243 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3245 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3246 accordingly. Don't declare functions using op_rtn.
3248 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3250 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3251 params to be more standard.
3252 * (disassemble): Print absolute addresses and symbolic names for
3253 branch and jump targets.
3254 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3256 * (v850_opcodes): Add breakpoint insn.
3258 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3260 * m68k-opc.c: Move the fmovemx data register cases before the
3261 other cases, so that they get recognized before the data register
3262 does gets treated as a degenerate register list.
3264 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3266 * mips-opc.c: Add a case for "div" and "divu" with two registers
3267 and a destination of $0.
3269 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3271 * mips-dis.c (print_insn_arg): Add prototype.
3272 (_print_insn_mips): Ditto.
3274 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3276 * mips-dis.c (print_insn_arg): Print condition code registers as
3279 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3281 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3283 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3285 * v850-dis.c (disassemble): Make static. Provide prototype.
3287 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3289 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3292 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3294 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3295 ']' characters into the output stream.
3296 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3297 Add "memop" field to all opcodes (for the disassembler).
3298 Reorder opcodes so that "nop" comes before "mov" and "jr"
3299 comes before "jarl".
3301 * v850-dis.c (print_insn_v850): Fix typo in last change.
3303 * v850-dis.c (print_insn_v850): Properly handle disassembling
3304 a two byte insn at the end of a memory region when the memory
3305 region's size is only two byte aligned.
3307 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3309 * v850-dis.c (v850_reg_names): Define.
3310 (v850_sreg_names, v850_cc_names): Likewise.
3311 (disassemble): Very rough cut at printing operands (unformatted).
3313 * v850-opc.c (BOP_MASK): Fix.
3314 (v850_opcodes): Fix mask for jarl and jr.
3316 * v850-dis.c: New file. Skeleton for disassembler support.
3317 * Makefile.in Remove v850 references, they're not needed here.
3318 * configure.in: Add v850-dis.o when building v850 toolchains.
3319 * configure: Rebuilt.
3320 * disassemble.c (disassembler): Call v850 disassembler.
3322 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3323 (insert_d8_6, extract_d8_6): New functions.
3324 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3325 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3327 (IF4A, IF4B): Use "D7" instead of "D7S".
3328 (IF4C, IF4D): Use "D8_7" instead of "D8".
3329 (IF4E, IF4F): New. Use "D8_6".
3330 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3331 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3333 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3334 (v850_operands): Change D16 to D16_15, use special insert/extract
3335 routines. New new D16 that uses the generic insert/extract code.
3336 (IF7A, IF7B): Use D16_15.
3337 (IF7C, IF7D): New. Use D16.
3338 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3340 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3341 message. Issue an error if the branch offset is odd.
3343 * v850-opc.c: Add notes about needing special insert/extract
3344 for all the load/store insns, except "ld.b" and "st.b".
3346 * v850-opc.c (insert_d22, extract_d22): New functions.
3347 (v850_operands): Use insert_d22 and extract_d22 for
3349 (insert_d9): Fix range check.
3351 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3353 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3354 and set bits field to D9 and D22 operands.
3356 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3358 * v850-opc.c (v850_operands): Define SR2 operand.
3359 (v850_opcodes): "ldsr" uses R1,SR2.
3361 * v850-opc.c (v850_opcodes): Fix opcode specs for
3362 sld.w, sst.b, sst.h, sst.w, and nop.
3364 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3366 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3367 end of the opcode table.
3369 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3371 * d10v-opc.c (pre_defined_registers): Added register pairs,
3372 "r0-r1", "r2-r3", etc.
3374 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3376 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3377 Create I16U for an unsigned 16bit mmediate operand.
3378 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3380 * v850-opc.c (v850_operands): Define EP operand.
3381 (IF4A, IF4B, IF4C, IF4D): Use EP.
3383 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3384 with immediate operand, "movhi". Tweak "ldsr".
3386 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3387 correct. Get sld.[bhw] and sst.[bhw] closer.
3389 * v850-opc.c (v850_operands): "not" is a two byte insn
3391 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3393 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3395 * v850-opc.c (two): Get order of words correct.
3397 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3399 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3400 register source and destination operands.
3401 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3403 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3404 same thinko in "trap" opcode.
3406 * v850-opc.c (v850_opcodes): Add initializer for size field
3409 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3410 Add D8 for 8-bit unsigned field in short load/store insns.
3411 (IF4A, IF4D): These both need two registers.
3412 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3413 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3414 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3415 for "ldsr" and "stsr".
3416 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3419 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3420 short store word (sst.w).
3422 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3424 * v850-opc.c (v850_operands): Added insert and extract fields,
3425 pointers to functions that handle unusual operand encodings.
3427 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3429 * v850-opc.c (v850_opcodes): Enable "trap".
3431 * v850-opc.c (v850_opcodes): Fix order of displacement
3432 and register for "set1", "clr1", "not1", and "tst1".
3434 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3436 * v850-opc.c (v850_operands): Add "B3" support.
3437 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3440 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3442 * v850-opc.c: Close unterminated comment.
3444 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3446 * v850-opc.c (v850_operands): Add flags field.
3447 (v850_opcodes): add move opcodes.
3449 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3451 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3452 * configure: (bfd_v850v_arch) Add new case.
3453 * configure.in: (bfd_v850_arch) Add new case.
3454 * v850-opc.c: New file.
3456 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3458 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3460 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3462 * d10v-opc.c: Add additional information to the opcode
3463 table to help determinine which instructions can be done
3466 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3468 * mpw-make.sed: Update editing of include pathnames to be
3471 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3473 * arm-opc.h: Added "bx" instruction definition.
3475 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3477 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3479 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3481 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3483 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3485 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3487 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3489 * makefile.vms: Update for alpha-opc changes.
3491 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3493 * i386-dis.c (print_insn_i386): Actually return the correct value.
3494 (ONE, OP_ONE): #ifdef out; not used.
3496 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3498 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3499 Changed subi operand type to treat 0 as 16.
3501 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3503 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3506 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3508 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3509 memory transfer instructions. Add new format string entries %h and %s.
3510 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3513 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3515 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3516 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3518 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * alpha-dis.c (print_insn_alpha_osf): Remove.
3521 (print_insn_alpha_vms): Remove.
3522 (print_insn_alpha): Make globally visible. Chose the register
3523 names based on info->flavour.
3524 * disassemble.c: Always return print_insn_alpha for the alpha.
3526 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3528 * d10v-dis.c (dis_long): Handle unknown opcodes.
3530 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3532 * d10v-opc.c: Changes to support signed and unsigned numbers.
3533 All instructions with the same name that have long and short forms
3534 now end in ".l" or ".s". Divs added.
3535 * d10v-dis.c: Changes to support signed and unsigned numbers.
3537 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3539 * d10v-dis.c: Change all functions to use info->print_address_func.
3541 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3543 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3544 move ccr/sr insns more strict so that the disassembler only
3545 selects them when the addressing mode is data register.
3547 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3548 * d10v-opc.c (pre_defined_registers): Declare.
3549 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3550 to pick a better name for the registers.
3552 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3554 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3555 operands for fexpand and fpmerge. From Christian Kuehnke
3556 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3558 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3560 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3561 print routine. Take new regnames and cpumask arguments.
3562 Kill the environment variable nonsense.
3563 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3564 (print_insn_alpha_vms): New function. Do VMS style regnames.
3565 * disassemble.c (disassembler): Test bfd flavour to pick
3566 between OSF and VMS routines. Default to OSF.
3568 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3570 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3571 * configure: Rebuild.
3572 * Makefile.in (install): Use @INSTALL_SHLIB@.
3574 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3576 * configure: (bfd_d10v_arch) Add new case.
3577 * configure.in: (bfd_d10v_arch) Add new case.
3578 * d10v-dis.c: New file.
3579 * d10v-opc.c: New file.
3580 * disassemble.c (disassembler) Add entry for d10v.
3582 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3584 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3585 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3587 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3589 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3590 distinguish between variants of the instruction set.
3591 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3592 distinguish between variants of the instruction set.
3594 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3596 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3597 the 8086 instruction set.
3598 * i386-dis.c: General cleanups. Make most things static. Add
3599 prototypes. Get rid of static variables aflags and dflags. Pass
3600 them as args (to almost everything).
3602 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3604 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3606 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3608 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3609 if the next arg is marked with SRC_IN_DST. Gross.
3611 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3612 we're looking for and find EXR.
3614 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3615 if we're looking for KBIT and we don't find it.
3617 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3620 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3621 3bit immediate operands.
3623 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3625 * Released binutils 2.7.
3627 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3628 <kkaempf@progis.ac-net.de>.
3630 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3632 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3634 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3636 * sparc-dis.c (print_insn_sparclite): New routine to print
3637 sparclite instructions.
3639 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3641 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3643 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3645 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3646 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3647 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3649 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3651 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3652 Use autoconf-set values.
3653 (docdir, oldincludedir): Removed.
3654 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3656 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3658 * alpha-opc.c: New file.
3659 * alpha-opc.h: Remove.
3660 * alpha-dis.c: Complete rewrite to use new opcode table.
3661 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3662 * configure: Rebuild with autoconf 2.10.
3663 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3664 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3666 (alpha-opc.o): New target.
3668 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3670 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3671 Set imm_added_to_rs1 even if the source and destination register
3674 * sparc-opc.c: Add some two operand forms of the wr instruction.
3676 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3678 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3681 * disassemble.c (disassembler): Handle H8/S.
3682 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3684 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3686 * sparc-opc.c: Add beq/teq as aliases for be/te.
3688 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3689 <sergei@msil.sps.mot.com>.
3691 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3693 * makefile.vms: New file.
3695 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3697 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3699 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3702 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3704 * i386-dis.c (OP_OFF): Call append_prefix.
3706 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3708 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3709 unsigned long to silence a warning from the Solaris PowerPC
3712 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3714 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3716 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3718 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3720 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3721 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3722 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3723 cpush, cpusha, cpull sparclet insns.
3725 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3727 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3729 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3731 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3732 Set F_FLOAT on other floating point instructions.
3734 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3736 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3738 (powerpc_opcodes): Add 860/821 specific SPRs.
3740 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3742 * configure.in: Permit --enable-shared to specify a list of
3743 directories. Set and substitute BFD_PICLIST.
3744 * configure: Rebuild.
3745 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3746 uses. Set to @BFD_PICLIST@.
3748 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3750 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3751 not "abs", which may be needed for the absolute in something
3752 like btst #0,@10:8. Print L_3 immediates separately from other
3753 immediates. Change ABSMOV reference to ABS8MEM.
3755 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3757 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3758 (current_arch_mask): New static global.
3759 (compute_arch_mask): New static function.
3760 (print_insn_sparc): Delete sparc_v9_p. New static local
3761 current_mach. Resort opcode table if current_mach changes.
3762 Generalize "insn not supported" test.
3763 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3764 Delete test for v9/!v9.
3765 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3767 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3768 (brfcx): Renamed to FBRX.
3769 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3770 coprocessor mnemonics are not supported on the sparclet).
3771 (condf): Renamed to CONDF.
3772 (SLCBCC2): Delete F_ALIAS flag.
3774 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3776 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3777 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3779 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3781 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3782 that the shared library version number is set correctly.
3784 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3786 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3787 Miles Bader <miles@gnu.ai.mit.edu>.
3788 * configure: Rebuild.
3790 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3792 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3795 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3797 * configure: Rebuild with autoconf 2.8.
3799 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3801 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3802 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3804 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3806 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3807 since they appear as targets in Makefile.in.
3808 * configure: Rebuild.
3810 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3812 * mpw-make.sed: Edit out shared library support bits.
3814 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3816 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3817 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3818 (sparc_opcodes): Add sparclet insns.
3819 (sparclet_cpreg_table): New static local.
3820 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3821 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3823 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3825 * i386-dis.c (index16): New static variable.
3826 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3828 (OP_indirE): Return result of OP_E.
3829 (OP_E): Check for 16 bit addressing mode, and disassemble
3830 correctly. Optimised 32 bit case a little. Don't print
3831 "(base,index,scale)" when sib specifies only an offset.
3833 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3835 * configure.in: Set and substitute SHLIB_DEP.
3836 * configure: Rebuild.
3837 * Makefile.in (SHLIB_DEP): New variable.
3838 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3839 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3840 COMMON_SHLIB, add them to piclist with appropriate modifications.
3841 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3842 here: just use piclist.
3844 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3846 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3847 (print_insn_sparc): Rewrite v9/not-v9 tests.
3848 (compare_opcodes): Likewise.
3849 * sparc-opc.c (MASK_<ARCH>): Define.
3850 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3851 (sparclet,v6notv9): Define.
3852 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3853 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3855 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3857 * configure.in: Call AC_PROG_CC before configure.host.
3858 * configure: Rebuild.
3860 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3862 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3864 * i386-dis.c (onebyte_has_modrm): New static array.
3865 (twobyte_has_modrm): New static array.
3866 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3868 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3870 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3873 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3875 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3878 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3880 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3881 m68010up, not just m68020up | cpu32.
3883 * Makefile.in (SONAME): New variable.
3884 ($(SHLINK)): Make a link to the transformed name, as well.
3885 (stamp-tshlink): New target.
3886 (install): Skip stamp-tshlink during install.
3888 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3890 * configure.in: Call AC_ARG_PROGRAM.
3891 * configure: Rebuild.
3892 * Makefile.in (program_transform_name): New variable.
3893 (install): Transform library name before installing it.
3895 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3897 * i960-dis.c (mem): Add HX dcinva instruction.
3899 Support for building as a shared library, based on patches from
3900 Alan Modra <alan@spri.levels.unisa.edu.au>:
3901 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3902 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3903 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3904 * configure: Rebuild.
3905 * Makefile.in (ALLLIBS): New variable.
3906 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3907 (COMMON_SHLIB, SHLINK): New variables.
3908 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3909 (STAGESTUFF): Remove variable.
3910 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3911 (stamp-piclist, piclist): New targets.
3912 ($(SHLIB), $(SHLINK)): New targets.
3913 ($(OFILES)): Depend upon stamp-picdir.
3914 (disassemble.o): Build twice if PICFLAG is set.
3915 (MOSTLYCLEAN): Add pic/*.o.
3916 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3917 (distclean): Remove pic and stamp-picdir.
3918 (install): Install shared libraries.
3919 (stamp-picdir): New target.
3921 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3923 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3924 Print unknown instruction as "unknown", rather than in hex.
3926 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3928 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3930 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3932 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3934 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3936 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3937 when necessary. From Ulrich Drepper
3938 <drepper@myware.rz.uni-karlsruhe.de>.
3940 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3942 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3943 sparc_num_opcodes. Update architecture enum values.
3944 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3945 (sparc_opcode_lookup_arch): New function.
3946 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3947 (sparc_opcodes): Add v9a shutdown insn.
3949 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3951 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3952 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3954 (print_insn_sparc64): Deleted.
3955 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3958 * sparc-opc.c (architecture_pname): Add v9a.
3960 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3962 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3963 incorrectly defined as 0x16 when it should be 0x15.
3964 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3965 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3966 excb (exception barrier) which is defined in the Alpha
3967 Architecture Handbook version 2.
3968 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3969 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3970 disassembled as or, for example.
3972 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3974 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3975 (_print_insn_mips): Change i from int to unsigned int.
3977 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3979 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3980 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3982 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3984 * i386-dis.c: Added Pentium Pro instructions.
3986 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3988 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3991 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3993 * sh-opc.h (sh_nibble_type): Added REG_B.
3994 (sh_arg_type): Added A_REG_B.
3995 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3997 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3999 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4001 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4003 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4005 * Makefile.in (distclean): Remove stamp-h. From Ronald
4006 F. Guilmette <rfg@monkeys.com>.
4008 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4010 From David Mosberger-Tang <davidm@azstarnet.com>:
4011 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4014 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4016 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4017 (sh_table): Added many SH3 opcodes.
4018 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4020 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4022 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4023 (subco,subco.): Mark this PPC, not PPCCOM.
4025 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4027 * configure: Rebuild with autoconf 2.7.
4029 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4031 * configure: Rebuild with autoconf 2.6.
4033 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4035 * configure.in: Sort list of architectures. Accept but do nothing
4036 for alliant, convex, pyramid, romp, and tahoe.
4038 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4040 * a29k-dis.c (print_special): Change num to unsigned int.
4042 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4044 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4047 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4049 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4050 * configure: Rebuilt.
4052 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4054 * configure.in: Add case for bfd_i860_arch.
4055 * configure: Rebuild.
4057 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4059 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4060 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4061 (NEXTDOUBLE): Likewise.
4062 (print_insn_m68k): Don't match fmoveml if there is more than one
4063 register in the list.
4064 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4066 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4068 * m68k-opc.c: Use #W rather than #w.
4069 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4071 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4073 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4074 and likewise for all the dbxx opcodes.
4076 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4078 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4080 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4082 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4083 the VR4100 specific instructions to the mips_opcodes structure.
4085 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4087 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4088 ugly Metrowerks bug in CW6, is fixed in CW7.
4090 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4092 * ppc-opc.c (whole file): Add flags for common/any support.
4094 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4096 * Makefile.in (BISON): Remove macro.
4097 (FLAGS_TO_PASS): Remove BISON.
4099 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4101 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4103 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4104 instructions that take no args by looking at the match mask.
4105 (print_insn_arg): Always print "%" before register names.
4106 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4107 [case '_']: Don't print "@#" before address.
4108 [case 'J']: Use "%s" as format string, not register name.
4109 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4111 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4113 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4116 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4118 From David Mosberger-Tang <davidm@azstarnet.com>
4120 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4121 (alpha_insn_set): added definitions for VAX floating point
4122 instructions (Unix compilers don't generate these, but handcoded
4123 assembly might still use them).
4125 * alpha-dis.c (print_insn_alpha): added support for disassembling
4126 the miscellaneous instructions in the Alpha instruction set.
4128 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4130 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4131 no longer create sysdep.h, sed ppc-opc.c to work around a
4132 serious Metrowerks C bug.
4133 * mpw-make.in: Remove.
4134 * mpw-make.sed: New file, used by mpw-configure to edit
4135 Makefile.in into an MPW makefile.
4137 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4139 * Makefile.in (maintainer-clean): New synonym for realclean.
4141 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4143 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4144 which use '0', '1', and '2' instead. Specify the proper size for
4145 a pmove immediate operand. Correct the pmovefd patterns to be
4146 moves to a register, not from a register.
4147 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4149 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4151 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4152 %psr, %wim, %tbr as F_NOTV9.
4154 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4156 * Makefile.in (Makefile): Just rebuild Makefile when running
4158 (config.h, stamp-h): New targets.
4159 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4160 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4161 rebuilding config.h.
4162 * configure: Rebuild.
4164 * mips-opc.c: Change unaligned loads and stores with "t,A"
4165 operands to use "t,A(b)".
4167 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4169 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4171 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4173 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4174 until 3 instead of until 2.
4176 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4178 * Makefile.in (ALL_CFLAGS): Define.
4179 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4180 (MOSTLYCLEAN): Add config.log.
4181 (distclean): Don't remove config.log.
4182 * configure.in: Substitute HDEFINES.
4183 * configure: Rebuild.
4185 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4187 * sh-opc.h (sh_arg_type): Add F_FR0.
4188 (sh_table, case fmac): Add F_FR0 as first argument.
4190 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4192 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4194 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4196 * sparc-dis.c: Remove all references to NO_V9.
4198 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4200 * aclocal.m4: Just include ../bfd/aclocal.m4.
4201 * configure: Rebuild.
4203 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4205 * sparc-dis.c (X_DISP19): Define.
4206 (print_insn, case 'G'): Use it.
4207 (print_insn, case 'L'): Sign extend displacement.
4209 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4211 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4212 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4213 host_makefile_frag or frags.
4214 * aclocal.m4: New file.
4215 * configure: Rebuild.
4216 * Makefile.in (INSTALL): Set to @INSTALL@.
4217 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4218 (INSTALL_DATA): Set to @INSTALL_DATA@.
4220 (AR_FLAGS): Set to rc rather than qc.
4221 (CC): Define as @CC@.
4222 (CFLAGS): Set to @CFLAGS@.
4223 (@host_makefile_frag@): Remove.
4224 (config.status): Remove dependency upon @frags@.
4226 * configure.in: ../bfd/config.bfd now just sets shell variables.
4227 Use them rather than looking through target Makefile fragments.
4228 * configure: Rebuild.
4230 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4232 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4234 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4236 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4237 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4240 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4241 (lookup_{name,value}): New functions.
4242 (prefetch_table): New static local.
4243 (sparc_{encode,decode}_prefetch): New functions.
4244 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4246 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4248 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4251 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4253 * sh-dis.c: Correct comment on first line of file.
4255 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4257 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4259 * sparc-opc.c (asi, membar): New static locals.
4260 (sparc_{encode,decode}_{asi,membar}): New functions.
4261 (sparc_opcodes, membar insn): Fix.
4262 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4263 Support decoding of membar masks.
4266 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4268 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4270 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4272 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4273 and likewise for the other branches. Add bhs as an alias for bcc,
4274 and likewise for the size variants. Add dbhs as an alias for
4277 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4279 * sh-opc.h (FP sts instructions): Update to match reality.
4281 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4283 * m68k-dis.c: (fpcr_names): Add % before all register names.
4284 (reg_names): Likewise.
4285 (print_insn_arg): Don't explicitly print % before register names.
4286 Add % before register names in static array names. In case 'r',
4287 print data registers as `@(Dn)', not `Dn@'. When printing a
4288 memory address, don't print @# before it.
4289 (print_indexed): Change base_disp and outer_disp from int to
4290 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4291 syntax. Sign extend 8 byte displacement correctly.
4292 (print_base): Print using MIT syntax. Print zpc when appropriate.
4293 Change parameter disp from int to bfd_vma.
4295 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4298 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4300 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4301 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4302 * sh-opc.h (sh_arg_type): Add new operand types.
4303 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4305 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4307 * Makefile.in (distclean): Remove generated file config.h.
4309 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4311 * Makefile.in (distclean): Remove generated file config.h.
4313 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4315 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4317 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4319 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4320 rather than numopcodes. Use m68k_opcodes rather than removed
4321 opcode function. Don't check F_ALIAS.
4322 (print_insn_arg): Change first parameter to be const char *.
4323 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4324 (m68k-opc.o): New target.
4325 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4326 * configure: Rebuild.
4328 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4330 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4331 (opcode_bits, opcode_hash_table): New variables.
4332 (opcodes_initialized): Renamed from opcodes_sorted.
4333 (build_hash_table): New function.
4334 (is_delayed_branch): Use hash table.
4335 (print_insn): Renamed from print_insn_sparc, made static.
4336 Build and use hash table. If !sparc64, ignore sparc64 insns,
4337 and vice-versa if sparc64.
4338 (print_insn_sparc, print_insn_sparc64): New functions.
4339 (compare_opcodes): Move sparc64 opcodes to end.
4340 Print commutative insns with constant second.
4341 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4343 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4345 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4346 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4347 avoids printing a delay slot in a delay slot.
4348 * sh-opc.h (sh_table): Fully bracket last entry.
4350 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4352 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4354 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4356 * configure.in: Get host_makefile_frag from ${srcdir}.
4358 * configure.in: Autoconfiscated. Check for string[s].h. Create
4359 config.h from config.in. Don't set up sysdep.h link.
4360 * sysdep.h: New file.
4361 * configure, config.in: New files, generated from configure.in.
4362 * Makefile.in: Updated to be processed autoconf-style.
4363 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4364 (Makefile): Depend on config.status.
4365 (config.status): New rule.
4366 * configure.bat: Update Makefile substitutions.
4368 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4370 * mips-opc.c (L1): Define.
4371 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4372 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4375 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4377 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4378 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4379 have multiple add units but only a single logical unit.
4381 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4382 shifted by 18, without any insertion or extraction function.
4383 (insert_cr, extract_cr): Remove.
4385 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4387 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4390 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4392 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4393 * sh-opc.h: Add copyright.
4395 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4397 * Makefile.in (crunch-m68k): Delete extra target accidentally
4398 checked in a while ago.
4400 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4402 * sh-opc.h (sh_table): Add SH3 support.
4404 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4406 * sh-opc.h: Added bsrf and braf.
4408 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4410 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4411 bogus [ls]fm{ea,fd} patterns.
4413 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4414 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4415 initialize it from memory. Make function static.
4416 (print_insn_{big,little}_arm): New functions.
4417 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4418 the correct endianness.
4420 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4422 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4425 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4427 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4428 17th, so that it builds again using GCC as the compiler.
4430 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4432 * mips-dis.c (print_insn_little_mips): Cast return value from
4433 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4434 expects an unsigned long, and that might be fewer words of
4435 argument storage (e.g., if bfd_vma is long long on a 32-bit
4437 (print_insn_big_mips): Likewise with bfd_getb32 value.
4438 (_print_insn_mips): Now static.
4440 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4442 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4443 gcc memory hog problem with initializer is fixed.
4445 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4447 Merge in support for Mac MPW as a host.
4448 (Old change descriptions retained for informational value.)
4450 * mpw-config.in (archname): Compute from the config.
4451 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4453 * mpw-config.in (target_arch): Compute from canonical target.
4454 (m68k, mips, powerpc, sparc): Add architectures.
4455 * mpw-make.in (disassemble.c.o): Add.
4456 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4458 * mpw-config.in (BFD_MACHINES): Set to a default value.
4459 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4461 * mpw-make.in (CSEARCH): Add extra-include to search path.
4463 * mpw-config.in (varargs.h): Don't create.
4464 (sysdep.h): Create using forward-include.
4465 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4467 * mpw-config.in: New file, MPW version of configure.in.
4468 * mpw-make.in: New file, MPW version of Makefile.in.
4470 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4472 * alpha-dis.c (print_insn_alpha): Put empty statement after
4475 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4477 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4478 (low_sign_extend): Likewise.
4479 (get_field): Delete unused function.
4480 (set_field, deposit_14, deposit_21): Likewise.
4482 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4484 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4487 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4489 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4491 * alpha-opc.h (OSF_ASMCODE): define
4492 print pal-code names as defined in App C of the
4493 Alpha Architecture Reference Manual
4495 * alpha-dis.c: cleaned up output
4496 print stylized code forms as defined in App A.4.3 of the
4497 Alpha Architecture Reference Manual
4499 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4501 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4503 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4506 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4508 * m68k-dis.c (opcode): New function. Returns address of opcode
4509 table entry given index, even if the opcode table was split to
4510 work around gcc bugs.
4511 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4513 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4514 (reg_names): Now const.
4515 (print_insn_arg): Arrays cacheFieldName and names now const.
4516 (print_indexed): Array scales now const.
4518 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4520 * ppc-opc.c: Sort recently added instructions by minor opcode
4521 number within major opcode number.
4523 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4525 * hppa-dis.c: Include libhppa.h.
4527 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4529 * mips-opc.c: Change dli to use M_DLI, and add dla.
4531 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4533 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4535 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4537 * mips-opc.c: Add r4650 mul instruction.
4539 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4541 * mips-opc.c: Add uld and usd macros for unaligned double load and
4544 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4546 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4547 mfdcr, mtdcr, icbt, iccci.
4549 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4551 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4552 signed char fields to shorts, more portable.
4554 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4556 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4557 char fields as signed chars, since they may have negative values.
4559 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4561 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4562 (mycroft@netbsd.org).
4564 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4566 From "Logg, Ed" <elogg@ea.com>:
4567 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4568 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4571 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4573 * ppc-opc.c: Changes based on patch from David Edelsohn
4574 <edelsohn@mhpcc.edu>.
4575 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4578 (insert_tbr): New static function.
4579 (extract_tbr): New static function.
4580 (XFXFXM_MASK, XFXM): Define.
4581 (XSPRBAT_MASK, XSPRG_MASK): Define.
4582 (powerpc_opcodes): Add instructions to access special registers by
4583 name. Add mtcr and mftbu.
4585 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4587 * mips-opc.c (P3): Define.
4588 (mips_opcodes): Add mad and madu.
4590 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4592 * configure.in: Add W65 support.
4593 * disassemble.c: Likewise.
4594 * w65-opc.h, w65-dis.c: New files.
4596 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4598 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4601 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4603 * mips-opc.c: Add dli as a synonym for li.
4605 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4607 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4608 print something for reserved opcode values, even if it won't
4611 * mips-dis.c (_print_insn_mips): When initializing, shift right
4612 and mask, to avoid sign extension problems on the Alpha.
4614 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4617 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4619 * sh-opc.h (mov.l gbr): Get direction right.
4620 * sh-dis.c (print_insn_shx): New function.
4621 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4622 print opcodes with right byte order.
4624 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4626 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4627 to avoid conflicts with getopt.
4629 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4631 * hppa-dis.c (print_insn_hppa): Read the instruction using
4632 bfd_getb32, so that it works on a little endian or 64 bit host.
4633 Remove unused local variable op.
4635 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4637 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4638 addu does not work correctly if -mips3.
4640 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4642 * a29k-dis.c (print_special): Add special register names defined
4643 on 29030, 29040 and 29050.
4644 (print_insn): Handle new operand type 'I'.
4646 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4648 * Makefile.in (INSTALL): Use top level install.sh script.
4650 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4652 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4653 that it works on a little endian host.
4655 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4657 * configure.in: Use ${config_shell} when running config.bfd.
4659 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4661 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4663 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4665 * a29k-dis.c (print_insn): Print the opcode.
4667 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4669 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4671 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4673 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4675 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4677 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4678 which store a value into memory.
4680 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4682 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4683 * arm-dis.c, arm-opc.h: New files.
4685 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4687 * Makefile.in (ns32k-dis.o): Add dependency.
4688 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4689 string, not as array of chars.
4691 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4693 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4695 * sparc-opc.c: Added sparclite extended FP operations, and
4696 versions of v9 impdep* instructions permitting specification of
4699 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4701 * i960-dis.c (reg_names): Now const.
4702 (struct sparse_tabent): New type, copied from array type in mem
4704 (ctrl): Local static array ctrl_tab now const.
4705 (cobr): Local static array cobr_tab now const.
4706 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4707 static variable mem_tab no longer explicitly initialized. Changed
4708 mem_init to const array of struct sparse_tabent.
4709 (reg): Local static variable reg_tab no longer explicitly
4710 initialized. Changed reg_init to const array of struct
4712 (ea): Local static array scale_tab now const.
4714 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4717 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4719 * configure.bat: the disassember needs to be enabled for
4720 "objdump -d" to work in djgpp.
4722 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4724 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4725 (invalid_float): Enabled general version, doesn't require running
4726 on ns32k host. Changed to take char* argument, and test for
4727 explicitly specified sizes, instead of using sizeof() on host CPU
4729 (INVALID_FLOAT): Cast first argument.
4730 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4731 list_P032, list_M032): Now const.
4732 (optlist, list_search): Made appropriate arguments now point to
4734 (print_insn_arg): Changed static array of one-character-string
4735 pointers into a static const array of characters; fixed sprintf
4736 statement accordingly.
4738 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4740 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4741 from distribution. A ns32k-dis.c from a previous distribution has
4742 been brought up to date and supports the new interface.
4744 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4746 * configure.in: add bfd_ns32k_arch target support.
4748 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4749 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4751 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4753 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4756 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4758 * h8300-dis.c, mips-dis.c: Don't use true and false.
4760 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4762 * configure.in: Change --with-targets to --enable-targets.
4764 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4766 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4767 opcodes to the first instruction with that opcode, to speed
4768 disassembly of large files. From ralphc@pyramid.com (Ralph
4771 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4775 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4777 * configure.bat: update to latest makefile.in
4779 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4781 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4782 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4783 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4784 slot insn is in a delay slot.
4785 * z8k-opc.h: (resflg): Fix patterns.
4786 * h8500-opc.h Fix CR insn patterns.
4788 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4791 "cmpl" before POWER versions, so that gas -many uses them.
4793 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4795 * disassemble.c: New file.
4796 * Makefile.in (OFILES): Add disassemble.o.
4797 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4798 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4799 binutils/configure.in.
4801 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4802 opcode being examined.
4804 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4806 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4807 (insert_ral, insert_ram, insert_ras): New functions.
4808 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4809 RAS for store with update.
4811 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4813 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4814 (edelsohn@npac.syr.edu).
4816 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4821 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4823 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4825 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4827 * ppc-opc.c (powerpc_operands): The signedp field has been
4828 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4829 instead. Add new operand SISIGNOPT.
4830 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4831 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4832 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4835 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4837 * i386-dis.c (struct private): Renamed to dis_private. `private'
4838 is a reserved word for dynix cc.
4840 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * configure.in: Change error message to refer to bfd/config.bfd
4843 rather than bfd/configure.in.
4845 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4847 * ppc-opc.c: Define POWER2 as short alias flag.
4848 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4851 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * i960-dis.c (print_insn_i960): Don't read a second word for
4854 opcodes 0, 1, 2 and 3.
4856 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4858 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4860 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * m68881-ext.c: Removed; no longer used.
4863 * Makefile.in: Changed accordingly.
4865 * m68k-dis.c (ext_format_68881): Don't declare.
4866 (print_insn_m68k): If an instruction uses place 'i', it uses at
4867 least four fixed bytes.
4868 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4869 extended float, convert to double using floatformat_to_double, not
4870 ieee_extended_to_double, and fetch the data before converting it.
4872 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4874 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4875 davidj@ICSI.Berkeley.EDU (David Johnson).
4877 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4879 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4880 PowerPC uses bdnz[l][a].
4882 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4884 * dis-buf.c, i386-dis.c: Include sysdep.h.
4886 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4888 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4890 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4891 by Motorola PowerPC 601 with PPC_OPCODE_601.
4892 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4893 Disassemble Motorola PowerPC 601 instructions as well as normal
4894 PowerPC instructions.
4896 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4898 * i960-dis.c (reg, mem): Just use a static array instead of
4901 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4903 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4904 condition name index if this is for a negated condition.
4906 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4907 Floating point format for 'H' operand is backwards from normal
4908 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4909 operands (fmpyadd and fmpysub), handle bizarre register
4910 translation correctly for single precision format.
4912 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4913 or 'I' operands if the next format specifier is 'M' (fcmp
4914 condition completer).
4916 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4918 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4919 single number giving a bitmask for the MB and ME fields of an M
4920 form instruction. Change NB to accept 32, and turn it into 0;
4921 also turn 0 into 32 when disassembling. Seperated SH from NB.
4922 (insert_mbe, extract_mbe): New functions.
4923 (insert_nb, extract_nb): New functions.
4924 (SC_MASK): Mask out SA and LK bits.
4925 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4926 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4927 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4928 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4929 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4930 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4931 (powerpc_macros): Define table of macro definitions.
4932 (powerpc_num_macros): Define.
4934 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4935 if PPC_OPERAND_NEXT is set.
4937 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4939 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4940 char. Retrieve contents using bfd_getl32 instead of shifting.
4942 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4944 * ppc-opc.c: New file. Opcode table for PowerPC, including
4945 opcodes for POWER (RS/6000).
4946 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4947 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4948 (CFILES): Add ppc-dis.c.
4949 (ppc-dis.o, ppc-opc.o): New targets.
4950 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4952 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4954 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4955 No space before 'u', 'f', or 'N'.
4957 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4959 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4960 farther than we should.
4962 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4964 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4966 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4968 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4970 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4971 needs it, to prevent reading past the end of a section.
4973 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4975 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4976 Removed t,A case for la; always use t,A(b) case.
4978 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4980 From Ted Lemen <mellon@pepper.ncd.com>
4981 * mips-dis.c (print_insn_arg): Handle 'k'.
4982 * mips-opc.c: Make cache use k, not t.
4984 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4986 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4987 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4988 FLOAT_FORMAT_CODE to put out floating point register names.
4990 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4992 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4994 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4996 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4998 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5000 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5001 larger than 32. Moved dsxx32 variants first for disassembler.
5003 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5005 * z8kgen.c, z8k-opc.h: Add full lda information.
5007 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5009 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5010 movb instructions. Any necessary space will be emitted by
5011 the code to handle nullification completers.
5013 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5015 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5017 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5019 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5020 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5022 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5024 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5026 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5028 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5029 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5031 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5033 * m88k-dis.c (m88kdis): comment change. Remove space after
5035 (printop): handle new arg types DEC and XREG for m88110.
5037 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5039 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5040 type for absolute branch addresses. Delete special
5041 "ble" and "be" code in 'W' operand code.
5043 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5045 * mips-opc.c: Set hazard information correctly for branch
5046 likely instructions.
5048 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5050 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5051 info->fprintf_func for printing and info->print_address_func for
5054 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5058 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5060 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5061 Corrected second case of "b" for disassembler.
5063 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5065 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5066 to BFD swapping routines to correspond to BFD name changes.
5068 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * mips-opc.c: Change div machine instruction to be z,s,t rather
5071 than s,t. Change div macro to be d,v,t rather than d,s,t.
5072 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5073 rem and remu which generates only the corresponding div
5074 instruction. This is for compatibility with the MIPS assembler,
5075 which only generates the simple machine instruction when an
5076 explicit destination of $0 is used.
5077 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5079 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5081 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5082 WR_31 hazard for bal, bgezal, bltzal.
5084 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5086 * hppa-dis.c (print_insn_hppa): Use print function
5087 from within the disassemble_info, not fprintf_filtered.
5089 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5091 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5092 Law, law@cs.utah.edu.)
5094 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5096 * mips-opc.c ("absu"): Removed.
5099 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5101 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5102 Changed hazard information to distinguish between memory load
5103 delays and coprocessor load delays.
5105 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5107 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5109 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5111 * configure.in: Don't pass cpu to config.bfd.
5113 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5115 * m88k-dis.c (m88kdis): Make class unsigned.
5117 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5119 * alpha-dis.c (print_insn_alpha): One branch format case was
5120 missing the instruction name.
5122 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5124 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5125 Add the arch-specific auxiliary files.
5126 (OFILES): Remove the arch-specific auxiliary files
5127 and use BFD_MACHINES instead of DIS_LIBS.
5128 * configure.in: Set BFD_MACHINES based on --with-targets option.
5130 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5132 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5135 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5137 * sparc-opc.c: Change CONST to const to deal with gcc
5138 -Dconst=__const -traditional.
5140 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5142 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5143 coprocessor instructions out of #if 0, and made them use new
5146 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5148 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5150 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5152 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5153 instruction, for use by the disassembler.
5155 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5156 hand-coded sign extensions that depended on 32-bit host ints.
5157 FIXME, we still depend on big-endian host bitfield ordering.
5158 (sparc_print_insn): Set the insn_info_valid field, and the
5159 other fields that describe the instruction being printed.
5161 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5163 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5164 `jmp' instead of just one of them.
5166 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5168 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5169 (fput_fp_reg_r): Renamed from fput_reg_r.
5170 (fput_fp_reg): New function.
5171 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5173 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5175 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5177 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5179 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5181 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5182 don't output a space.
5184 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5186 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5188 * mips-opc.c: New file, containing opcode table from
5189 ../include/opcode/mips.h.
5190 * Makefile.in: Add it.
5192 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5194 * m88k-dis.c: New file, moved in from gdb and changed to use the
5195 new dis-asm.h disassembler interface.
5196 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5197 (m88k-dis.o): New target.
5199 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5201 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5202 argument string const char * to correspond to opcode/mips.h.
5204 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5206 * mips-dis.c: Updated to account for name changes in new version
5208 * Makefile.in: Added header file dependencies.
5210 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5212 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5214 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5216 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5217 extend, rather than shifts.
5219 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5221 * Makefile.in: Undo 15 June change.
5223 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5225 * m68k-dis.c (print_insn_arg): Change return value to byte count
5227 * m68k-dis.c: Re-write to detect invalid operands before
5228 printing anything, so we can handle this the same way we
5229 handle invalid opcodes.
5231 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5233 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5235 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5237 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5240 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5242 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5244 * configure.in: Do make sysdep.h link.
5245 * Makefile.in: Search ../include. Don't search ../bfd.
5247 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5249 Changes from Jeff Law, law@cs.utah.edu:
5250 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5251 Do not print a space before the completers specified by
5254 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5256 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5257 defined, since gdb has been fixed.
5259 Changes from Jeff Law, law@cs.utah.edu:
5260 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5261 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5262 be a *disassemble_info, not a *FILE.
5263 * hppa-dis.c: Support 'd', '!', and 'a'.
5264 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5265 * hppa-dis.c: Delete cases which are no longer needed.
5267 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5269 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5271 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5273 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5276 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5278 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5279 * configure.in: No longer need to configure to get sysdep.h.
5281 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5283 * Patches from Jeffrey Law <law@cs.utah.edu>.
5284 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5285 templates for 1.1 FP computational instructions.
5287 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5289 * h8500-dis.c (print_insn_h8500): Address argument is type
5291 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5294 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5295 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5297 * sparc-dis.c (compare_opcodes): Move static declaration to
5300 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5302 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5303 instruction, remove unimp hack from 'l' argument.
5305 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5307 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5310 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5312 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5313 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5316 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5318 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5319 arrays of string pointers to 2-d arrays of chars, to save
5322 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5324 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5325 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5327 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5329 * hppa-dis.c: New file from Utah, adapted to new disassembler
5331 * Makefile.in: Include it.
5333 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5335 * sh-dis.c, sh-opc.h: New files.
5337 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5339 * alpha-dis.c, alpha-opc.h: New files.
5341 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5343 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5346 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5348 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5350 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5352 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5355 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5357 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5358 and double percent signs a few places.
5360 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5362 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5363 Use info->print_address_func not print_address.
5365 * dis-buf.c (generic_print_address): New function.
5367 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5369 * Makefile.in: Add sparc-dis.c.
5370 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5372 Add `add' instruction to the set that get checked
5373 for a preceding `sethi' in order to print an absolute address.
5374 * (print_insn): Disassembly prefers real instructions.
5375 (is_delayed_branch): Speed up.
5376 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5377 Still missing some float ops, and needs testing.
5378 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5379 F_ALIAS. Use printf, not fprintf, when not passing a file
5381 (compare_opcodes): Check that identical instructions have
5382 identical opcodes, complain otherwise.
5385 * Include reg_names.
5387 Use dis-asm.h/read_memory_func interface.
5389 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5391 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5392 deliberately return non-zero to setjmp from longjmp. Otherwise
5393 this code fails to compile.
5395 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5397 * m68k-dis.c: Fix prototype for fetch_arg().
5399 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5401 * dis-buf.c: New file, for new read_memory_func interface.
5402 Makefile.in (OFILES): Include it.
5403 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5404 Use new read_memory_func interface.
5406 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5408 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5409 * h8500-opc.h: Fix couple of opcodes.
5411 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5413 * Makefile.in: add dvi & installcheck targets
5415 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5417 * Makefile.in: Update for h8500-dis.c.
5419 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5421 * h8500-dis.c, h8500-opc.h: New files
5423 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5425 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5426 ../include/dis-asm.h.
5427 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5428 and ../gdb/m68k-pinsn.c).
5429 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5430 and ../gdb/i386-pinsn.c).
5431 * m68881-ext.c: New file. Moved definition of
5432 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5433 * Makefile.in: Adjust for new files.
5434 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5435 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5436 can be dis-assembled.
5438 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5440 * mips-dis.c (print_insn_arg): Now returns void.
5442 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5444 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5445 files that use the macros.
5447 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5449 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5450 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5451 (CFILES): Added mips-dis.c.
5453 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5455 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5456 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5458 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5460 * Makefile.in: Improve *clean rules.
5461 * configure.in: Allow a default host.
5463 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5465 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5466 files include other sysdep files
5468 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5470 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5472 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5474 * configure.in: For host support, use ../bfd/configure.host
5475 so it stays in sync with the ../bfd/hosts database.
5477 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5479 * configure.in: use cpu-vendor-os triple instead of nested cases
5481 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5483 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5484 *always* the wrong one.
5486 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5488 * z8kgen.c: added copyright info
5490 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5492 * z8k-dis.c (unparse_instr): prettier tabs
5493 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5495 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5497 * configure.in: Add ncr* configuration.
5498 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5499 picayune ANSI compilers happy.
5501 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5503 * configure.in (i386): Make i386 and i486 synonymous for now.
5504 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5506 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5508 * Makefile.in (install): Fix typo.
5510 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5512 * Makefile.in (make): Remove obsolete crud.
5513 (sparc-opc.o): Avoid Sun Make VPATH bug.
5515 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5517 * Makefile.in: since there are no SUBDIRS, remove rule and
5518 references of subdir_do.
5520 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5522 * Makefile.in (install): Get the library name right here too.
5523 Don't install bfd.h, since it's unrelated to this library. No
5524 subdirs to recurse into, either.
5525 (CFILES): The source file has a .c suffix, not .o.
5527 * sparc-opc.c: New file, moved from BFD.
5528 * Makefile.in (OFILES): Build it.
5530 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5532 * z8k-dis.c: fixed forward refferences of some declarations.
5534 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5536 * Makefile.in: get the name of the library right
5538 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5540 * z8k-dis.c: knows how to disassemble z8k stuff
5541 * z8k-opc.h: new file full of z8000 opcodes
5545 version-control: never