2 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
4 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
5 (_print_insn_mips): Likewise.
6 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
10 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
12 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
13 (cgen_hw_lookup_by_num): New function.
16 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
19 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
21 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
23 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
25 * sparc-dis.c (print_insn_sparc): Always fetch instructions
26 as big-endian on SPARClite.
29 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
31 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
33 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
37 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
39 * d30v-opc.c (pre_defined_register): Remove alias for r0.
42 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
44 * mips-opc.c (break): Added 20-bit single-operand break
45 instruction for R5900 only.
48 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
50 * po/Make-in (install-info): New target.
52 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
54 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
57 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
59 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
60 variety of ISA2 instructions to set bottom ten bits of trap code.
62 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
64 * Makefile.am (config.status): Add explicit target so that
65 config.status depends upon bfd/configure.in.
66 * Makefile.in: Rebuild.
68 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
70 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
71 instructions to set bottom ten bits of break code.
72 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
73 for above optional argument.
76 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
78 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
79 * m32r-opc.h: Regenerate.
82 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
84 * makefile.vms: Run dec c with /nodebug.
86 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
88 * Makefile.in: Rebuilt.
89 * Makefile.am: Regenerated dependencies with mkdep.
91 * opintl.h (_): Define as dgettext.
94 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
96 * configure.in: Add support for --enable-cgen-maint.
97 * Makefile.am (M32R_DEPS): New variable.
98 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
99 * aclocal.m4: Regenerate.
100 * Makefile.in: Regenerate.
101 * configure: Regenerate.
103 * Makefile.am (CGENFILES): Add minsn.scm.
106 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
108 * cgen-asm.c: Internationalised.
109 start-sanitize-cygnus
110 * cgen-asm.in: Internationalised.
111 * cgen-opc.in: Internationalised.
113 * m32r-asm.c: Internationalised.
114 * m32r-dis.c: Internationalised.
115 * m32r-opc.c: Internationalised.
117 * aclocal.m4: Regenerated.
118 * configure: Regenerated.
119 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
120 * Makefile.in: Rebuild.
121 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
122 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
124 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
126 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
128 * aclocal.m4, configure: Rebuild with current tools.
130 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
132 * opintl.h: New file - contains internationalisation macros used
133 by source files in this directory.
134 * po/: New subdirectory - contains internationalisation files.
135 * po/Make-in: New file - Makefile constructor.
136 * po/POTFILES.in: New file - list of files in opcodes directory
137 that should be scan for internationalisation macros.
138 * po/opcodes.pot: New file - list of internationisation strings
139 found in files mentioned in po/POTFILES.in.
140 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
141 entry. Add intl directory to include paths.
142 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
143 HAVE_STRCPY, HAVE_LC_MESSAGES
144 * configure.in: Add rule to build Makefile in po subdirectory.
145 * Makefile.in: Rebuilt.
146 * aclocal.m4: Rebuilt.
147 * config.in: Rebuilt.
148 * configure: Rebuilt.
149 * alpha-opc.c: Internationalised.
150 * arc-dis.c: Internationalised.
151 * arc-opc.c: Internationalised.
152 * arm-dis.c: Internationalised.
153 * cgen-asm.c: Internationalised.
155 * d30v-dis.c: Internationalised.
157 * dis-buf.c: Internationalised.
159 * dvp-dis.c: Internationalised.
160 * dvp-opc.c: Internationalised.
162 * h8300-dis.c: Internationalised.
163 * h8500-dis.c: Internationalised.
164 * i386-dis.c: Internationalised.
165 * m10200-dis.c: Internationalised.
166 * m10300-dis.c: Internationalised.
167 * m68k-dis.c: Internationalised.
168 * m88k-dis.c: Internationalised.
169 * mips-dis.c: Internationalised.
170 * ns32k-dis.c: Internationalised.
171 * opintl.h: Internationalised.
172 * ppc-opc.c: Internationalised.
173 * sparc-dis.c: Internationalised.
174 * v850-dis.c: Internationalised.
175 * v850-opc.c: Internationalised.
177 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
179 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
180 (asm_hash_table_entries): New variable.
181 (cgen_asm_init): Free asm_hash_table_entries.
182 (hash_insn_array,hash_insn_list): New functions.
183 (build_asm_hash_table): Use them. Hash macro insns as well.
184 (cgen_asm_lookup_insn): Update.
185 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
186 (dis_hash_table_entries): New variable.
187 (cgen_dis_init): Free dis_hash_table_entries.
188 (hash_insn_array,hash_insn_list): New functions.
189 (build_dis_hash_table): Use them. Hash macro insns as well.
190 (cgen_dis_lookup_insn): Update.
191 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
192 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
193 (cgen_macro_insn_count): New function.
194 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
195 All callers updated. Sanity check result of extract fn.
196 (@arch@_cgen_get_insn_operands): Change result type to void.
197 Delete args insn_value, length. New arg fields. All callers updated.
198 (@arch@_cgen_lookup_get_insn_operands): New function.
199 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
201 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
203 * i386-dis.c (OP_DSSI): Print segment override.
206 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
208 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
212 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
214 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
218 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
220 * vu0.h (vlqd, vlqi): Update per revised specs.
224 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
226 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
227 (vif_operands): Update.
228 (vif_get_unpackloc): Delete.
229 (state_vif_unpackloc{,_star_p}): Delete.
230 (dvp_opcode_init_parse): Update.
231 (vif_unpack_len_value): Avoid divide by zero.
235 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
237 * vu0.h: Specs changed for VCALLMSR bit pattern.
238 * mips-dis.c: (print_insn_arg) Matching change.
241 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
243 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
246 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
248 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
249 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
250 * configure.in: Define and substitute WIN32LDFLAGS and
252 * aclocal.m4: Rebuild with new libtool.
253 * configure, Makefile.in: Rebuild.
256 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
258 * vu0.h: Corrected bit pattern for VMAXI opcode.
261 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
263 * m32r-opc.c: Regenerate.
266 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
268 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
269 (dvp_expand_macro): Implement.
270 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
271 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
274 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
276 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
277 before trying to copy it.
278 * Makefile.in: Rebuild.
280 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
282 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
285 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
287 * m32r-opc.c: Fix bit patterns for SAT and SATB.
290 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
292 * ns32k-dis.c (bit_extract_simple): New function to extract bits
293 from an arbitrary valid buffer instead of fetching them on demand
295 (invalid_float): use bit_extract_simple() instead of bit_extract().
298 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
300 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
301 * m32r-opc.h: Add extra control registers.
304 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
306 From H.J. Lu <hjl@gnu.org>:
307 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
310 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
312 * Branched binutils 2.9.
315 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
317 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
318 disassembling last 4 bytes of a section.
321 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
323 Fix some gcc -Wall warnings:
324 * arc-dis.c (print_insn): Add casts to avoid warnings.
325 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
326 * d10v-dis.c (dis_long, dis_2_short): Likewise.
328 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
329 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
330 (parse_bc, parse_vfreg, parse_accdest): Likewise.
331 (parse_ffstreg, parse_vif_mode): Likewise.
333 * m10200-dis.c (disassemble): Likewise.
334 * m10300-dis.c (disassemble): Likewise.
335 * ns32k-dis.c (print_insn_ns32k): Likewise.
336 * ppc-opc.c (insert_ral, insert_ram): Likewise.
337 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
338 * cgen-opc.c (cgen_keyword_search_next): Likewise.
339 * d10v-dis.c (dis_long, dis_2_short): Likewise.
341 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
344 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
345 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
346 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
348 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
350 * tic80-dis.c (print_one_instruction): Likewise.
352 * w65-dis.c (print_operand): Likewise.
353 * z8k-dis.c (fetch_data): Likewise.
354 * a29k-dis.c: Add return type for find_byte_func_type.
355 * arc-opc.c: Include <stdio.h>. Remove declarations of
356 insert_multshift and extract_multshift.
358 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
360 (extract_value): Fully parenthesize expression.
363 * dvp-opc.c: Include <ctype.h>.
364 (print_sdest): Add default case to switch.
366 * h8500-dis.c (print_insn_h8500): Initialize local variables.
367 * h8500-opc.h (h8500_table): Fully bracket initializer.
368 * w65-opc.h (optable): Likewise.
369 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
370 * i386-dis.c (OP_E): Initialize local variables.
371 * m10200-dis.c (print_insn_mn10200): Likewise.
372 * mips-dis.c (print_insn_mips16): Likewise.
373 * sh-dis.c (print_insn_shx): Likewise.
374 * v850-dis.c (print_insn_v850): Likewise.
375 * ns32k-dis.c (print_insn_arg): Declare.
376 (get_displacement, invalid_float): Declare.
377 (list_search, sign_extend, flip_bytes): Declare return type.
378 (get_displacement): Likewise.
379 (print_insn_arg): Likewise. Make d int. Fix sprintf format
381 (print_insn_ns32k): Make i unsigned.
382 (invalid_float): Make static. Declare type of val.
383 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
384 on each for iteration.
385 * tic30-dis.c (get_indirect_operand): Likewise.
386 * z8k-dis.c (print_insn_z8001): Declare return type.
387 (print_insn_z8002): Likewise.
388 (unparse_instr): Fix sprintf format strings.
390 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
392 * mips-opc.c: Add "sync.l" and "sync.p".
395 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
397 * dvp-opc.c (extract_vif_datalen): Rewrite.
398 (vif_insn_len): Perform 0->max+1 conversion for direct length.
400 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
402 * dvp-dis.c (print_insn): Print unpack address in hex.
403 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
404 Don't skip over '*', just record it.
405 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
406 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
407 Don't skip over '*', just record it.
408 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
409 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
410 (vif_opcodes): Likewise.
411 (state_vif_{mpg,unpack}loc_star_p): New static locals.
412 (vif_macros,vif_macro_count): New globals.
413 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
414 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
415 (vif_get_wl_cl): New function.
416 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
419 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
421 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
422 default m68k variant to recognize.
424 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
425 (ctrl, cobr, mem, ea): Likewise.
426 (print_addr): Likewise. Remove cast.
427 (ea): Cast argument of print_addr to bfd_vma.
429 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
431 (cgen_parse_unsigned_integer): Likewise.
432 (cgen_parse_address): Likewise.
434 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
436 * i960-dis.c (ctrl): Add full braces to structure initialization.
437 (cobr, mem, reg): Likewise.
438 (ea): Correct parenthesization in expression.
440 * cgen-asm.c: Include <ctype.h>.
441 (build_asm_hash_table): Remove unused local variable i.
442 (cgen_parse_keyword): Add casts to avoid warnings.
444 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
445 symbol. Fix indentation.
446 (print_insn_little_arm): Likewise.
449 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
451 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
456 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
458 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
463 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
465 * dvp-opc.c (vif_operand_datalen_special): New global.
469 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
471 * vu0.h (vcallms): Use 'O' for call target operand.
472 * mips-dis.c (print_insn_arg): Handle 'O'.
475 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
477 * configure.in: Use AM_DISABLE_SHARED.
478 * aclocal.m4, configure: Rebuild with libtool 1.2.
481 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
483 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
488 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
490 These patches are courtesy of Jonathan Walton and Tony Thompson
491 (athompso@cambridge.arm.com).
493 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
496 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
497 both the offset and the label closest to the destination.
500 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
502 * vu0.h: New file with cop2/vu0 instructions.
503 * mips-opc.c: Include vu0.h.
504 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
506 (print_insn_mips): Do not emit a tab after an instruction if the
507 first arg is an instruction completer (&). If the next arg is an
508 escape character (%), then print the next arg verbatim.
509 * Makefile.am (mips-opc.lo): Depend on vu0.h
513 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
515 * dvp-opc.c (vif_opcodes): Add stcycl.
517 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
519 * dvp-dis.c (print_dma): Change length from 16 to 8.
522 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
524 * m32r-opc.h: Regenerate.
527 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
529 * dvp-opc.c (print_dest1): Print dest spec again.
530 (print_vfreg,print_accdest): Likewise.
531 (vif_unpack_len): Round result up to word boundary.
534 start-sanitize-vr4320
535 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
537 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
539 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
541 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
546 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
548 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
549 (print_insn): Do mask comparison on proper opcode word.
550 Print unsigned values in hex.
551 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
552 (parse_bc): Catch missing dest.
553 (parse_vfreg): Replace atoi call with strtol.
554 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
555 (parse_bcftreg,parse_ffstreg): Handle missing dest.
556 (extract_gif_eop): New function.
557 (gif_operands): Update eop entry.
558 (VGIFOP,VGIFNREGS): Fix calcs.
559 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
560 (gif_regs): Add entry for unused 11 case.
561 (print_gif_regs): Print empty list instead of nothing.
562 (extract_gif_nloop): Fix value calc.
563 (print_gif_nloop): Always print value, even if 0.
564 (insert_vif_wlcl,extract_vif_wlcl): New functions.
565 (vif_operands): Use them for wl,cl fields.
566 (state_vif_wl,state_vif_cl): New static locals.
567 (parse_vif_mode): Handle numeric args.
568 (vif_unpack_len_value,vif_unpack_len): New functions.
569 (vif_insn_len): Call vif_unpack_len.
572 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
574 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
576 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
578 * cgen-asm.in: Move insertion of generated routines to top of file.
579 (insert_normal): Add prototype. Delete `shift' arg.
580 * cgen-dis.in: Move insertion of generated routines to top of file.
581 (extract_normal): Add prototype. Delete `shift' arg.
582 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
583 (print_keyword): Add prototype. Fix type of `attrs' arg.
585 start-sanitize-vr4320
586 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
588 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
589 * mips-opc.c ("mac","dmac") : Added 4320 insns.
592 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
594 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
595 assume that info->symbols is non-empty.
597 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
599 * alpha-opc.c (cvtqs) There is no such thing.
600 (cvttq): Missing most of the /*d variants.
603 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
605 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
607 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
608 (r5900/msub.s): Takes three operands, not four. Fix opcode.
612 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
614 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
615 delayed branches or jumps.
619 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
621 * dvp-opc.c (vif_operands): Add unpack[u] support.
622 (vif_opcodes): Ditto.
623 (*_vif_imrubits): Renamed from *_vif_imrbits.
625 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
627 * dvp-dis.c (print_insn): Handle word number.
628 Handle mips address vs vu address.
629 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
630 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
631 ({insert,extract}_dma_addr): Fix word ofset.
632 ({insert,print}_gif_regs): Fix encode/decode.
635 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
637 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
639 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
640 * tic30-dis.c (print_branch): Likewise.
642 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
643 * dvp-dis.c (dvp_info_mach_type): New function.
644 (print_insn_dvp): Call it.
645 (print_vif): Return length of 4 if mpg or direct insn so following
646 insns get properly disabled.
647 (print_gif): Fix word order.
648 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
649 (gif_operands): Fix word order.
650 (gif_opcodes): Likewise.
651 ({insert,extract,print}_gif_regs): Likewise.
652 (gif_regs): Add new register number/name changes.
653 (dma_opcodes): Add dmarefe insn.
656 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
658 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
659 saved_symbol code as it is no longer needed.
661 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
663 * cgen-asm.c: Include symcat.h.
664 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
666 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
669 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
671 * dvp-opc.c (extra_dma_flags): Fix typos.
672 (dma_operands): Fix word numbers.
673 (dma_opcodes): Likewise.
674 ({insert,extract}_dma_flags): Likewise.
677 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
679 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
682 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
684 * dvp-dis.c (print_gif): Complete.
685 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
686 (state_gif_{nregs,regs,nloop}): New static locals.
688 (dvp_opcode_init_{parse,print}): Init gif state locals.
689 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
690 (vif_insn_len): Handle `unpack'.
691 ({insert,extract}_dma_flags): Complete.
695 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
697 * mips-opc.c (mula.s): Renamed from multa.s.
700 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
702 * m32r-opc.[ch]: Regenerate.
705 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
707 * dvp-opc.c (dma_operands): Rewrite.
708 (dma_operand_{count,addr}): New globals.
709 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
710 (insert_dma_addr): Insert value into insn.
711 (extract_dma_addr): Extract value from insn.
713 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
715 * dvp-dis.c (print_vu): Handle loi insns.
716 (print_insn): Likewise.
717 * dvp-opc.c (vu_lower_opcodes): Add "loi".
718 (vu_operands): Make LDEST1 a FAKE operand.
719 (parse_dest1): Allow elided argument.
720 (print_dest1): Don't print the argument.
722 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
724 * dvp-opc.c (parse_vfreg): Dest spec is optional.
725 (print_vfreg): Don't print dest spec.
726 (parse_accdest): Dest spec is optional.
727 (print_accdest): Don't print dest spec.
730 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
732 * Makefile.am (CGENFILES): Update.
733 * Makefile.in: Regenerate.
734 * cgen-asm.in (insert_normal): Result is error message now.
735 Validate value to be inserted.
736 (insert_insn_normal): Result is error message now.
737 (@arch@_cgen_assemble_insn): Update.
738 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
739 arguments. Don't perform validation here.
740 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
742 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
744 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
745 operand instance list.
746 * m32r-opc.c: Regenerate.
748 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
750 * Makefile.am (AUTOMAKE_OPTIONS): Define.
751 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
753 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
755 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
757 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
759 * configure.in: Get the version number from BFD.
760 * configure: Rebuild.
762 From H.J. Lu <hjl@gnu.org>:
763 * Makefile.am (libopcodes_la_LDFLAGS): Define.
764 * Makefile.in: Rebuild.
766 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
768 * m32r-opc.c: Regenerate.
769 * m32r-opc.h: Regenerate.
771 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
773 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
774 Ignore ALIAS insns if asked to.
775 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
776 * m32r-opc.c: Regenerate.
779 * dvp.opc.c: Nicely format opcode tables.
780 (vu_operands): New element UFLAGS.
781 (parse_uflags,print_uflags): New functions.
782 (vu_upper_opcodes): Add UFLAGS to all insns.
785 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
787 Fix rac to accept only a0:
788 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
789 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
790 Introduce OPERAND_GPR.
791 * d10v-dis.c (print_operand): Likewise.
793 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
795 * cgen-opc.in: New file.
796 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
797 * Makefile.am (CGENFILES): Add cgen-opc.in.
798 * Makefile.in: Regenerate.
800 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
801 (cgen_hw_lookup): Make result const.
803 * cgen-dis.in (*): Use PTR instead of void *.
804 (print_insn): Delete unused vars `i', `syntax'.
806 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
809 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
811 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
812 (vif_opcodes): Update renamed insns.
813 * dvp-dis.c (*): Likewise.
816 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
818 * configure, aclocal.m4: Rebuild with new libtool.
821 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
823 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
824 instructions use a PC relative branch, not absolute.
827 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
829 * configure.in: Set libtool_enable_shared rather than
830 libtool_shared. Remove diversion hack.
831 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
833 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
835 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
836 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
838 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
840 * tic30-dis.c: New file.
841 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
842 * configure.in: Handle bfd_tic30_arch.
843 * Makefile.am: Rebuild dependencies.
844 (CFILES): Add tic30-dis.c
845 (ALL_MACHINES): Add tic30-dis.lo.
846 * configure, Makefile.in: Rebuild.
849 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
851 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
852 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
853 macwhi-a and macwlo-a instructions.
857 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
859 * dvp-opc.c, fixed encoding of a bunch of instructions to
860 be consistent with the asmvu assembler (and inconsistent
861 with the specification).
863 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
865 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
866 in the opcode table. The pkemscalf instruction must come first.
868 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
870 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
873 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
875 * m32r-opc.h (HAVE_CPU_M32R): Define.
878 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
880 * dvp-dis.c, dvp-opc.c: New files.
881 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
882 * configure: Regenerate.
883 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
884 (dvp-dis.lo,dvp-opc.lo): Add rules for.
885 (mips-dis.lo): Compile with @archdefs@.
886 * Makefile.in: Regenerate.
887 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
888 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
891 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
893 * v850-opc.c (insertion routines): If both alignment and size is
894 wrong then report this.
896 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
898 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
899 Only recognize instructions for the current target_processor.
901 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
903 * d10v-dis.c (PC_MASK): Correct value.
904 (print_operand): If there's a reloc, don't calculate the
905 address because they could be in different sections.
907 start-sanitize-cygnus
908 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
910 * cgen.sh: Rewrite to be like simulator's version.
911 * Makefile.am (cgen): Update call to cgen.sh.
912 * Makefile.in: Regenerate
915 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
917 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
918 instruction after the 4650's "mul" instruction; nobody's using the
919 4010 these days. If object files someday indicate which processor
920 variant they're intended for, we can do a better job at this.
923 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
925 * mips-opc.c (c.lt.s): Add r5900 variant.
929 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
931 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
932 table provided entry size. Use CGEN_INSN_MNEMONIC.
933 (cgen_parse_keyword): Rewrite.
934 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
935 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
936 * cgen-opc.c: Clean up pass over `struct foo' usage.
937 (cgen_keyword_lookup_value): Handle "" entry.
938 (cgen_keyword_add): Likewise.
939 start-sanitize-cygnus
940 * Makefile.am: Add cgen support.
941 * Makefile.in: Regenerate.
942 * configure.in: Add cgen support.
943 * configure: Regenerate.
944 * aclocal.m4: Regenerate.
945 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
948 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
950 * mips-opc.c: Add FP_D to s.d instruction flags.
952 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
954 * m68k-opc.c (halt, pulse): Enable them on the 68060.
957 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
959 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
960 PC relative offset forms before the 15 bit forms. An assembler command
961 line option now chooses the default.
965 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
967 * mips-opc.c: Add many missing r5900 instructions.
971 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
973 * d30v-opc.c (d30v_opcode_table): Set new flags bits
974 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
977 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
979 * configure: Only build libopcodes shared if --enable-shared's value
980 was `yes', or was set to `*opcodes*'.
981 * aclocal.m4: Likewise.
982 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
983 original source of this bit of code. It's not clear what the best fix
987 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
989 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
992 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
994 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
995 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
996 offset forms before the 15 bit forms, to default to the long forms.
999 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1001 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1003 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1005 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1006 symbol if none is present.
1007 (print_insn_big_arm): Prevent examination of stored symbol if
1010 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1012 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1014 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1016 * disassemble.c: Remove disasm_symaddr() function.
1018 * arm-dis.c: Use info->symbol instead of info->flags to determine
1019 if disassmbly should be in Thumb or Arm mode.
1021 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1023 * arm-dis.c: Add support for disassembling Thumb opcodes.
1024 (print_insn_thumb): New function.
1026 * disassemble.c (disasm_symaddr): New function.
1028 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1029 (thumb_opcodes): Table of Thumb opcodes.
1031 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1033 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1035 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1036 and 'v' as operand types.
1038 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1040 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1041 <olivier.carmona@di.epfl.ch>.
1042 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1043 which has a two word opcode with a one word argument.
1046 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1048 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1049 unsigned, not signed.
1050 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1053 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1055 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1056 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1057 (ftrv): Slay the cut-and-paste monster.
1059 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1061 * d10v-dis.c (print_operand):
1062 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1064 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1066 * d10v-opc.c (OPERAND_FLAG): Split into:
1067 (OPERAND_FFLAG, OPERAND_CFLAG) .
1071 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1073 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1074 field for all INSN_MACRO's.
1075 * mips16-opc.c: same
1077 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1079 * mips-opc.c (sync,cache): These are 3900 insns.
1081 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1083 sh-opc.h (sh_table): Remove ftst/nan.
1085 start-sanitize-vr5400
1086 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1088 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1089 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1091 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1095 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1097 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1098 Add tx49 insns and configury.
1101 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1103 * mips-opc.c (ffc, ffs): Fix mask.
1106 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1108 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1112 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1114 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1115 start-sanitize-vr5400
1116 Added VR5400 instructions.
1117 (N5): New cpu-id macro.
1119 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1121 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1123 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1124 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1126 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1128 * v850-dis.c (disassemble): Replace // with /* ... */
1130 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1132 * sparc-opc.c: Add wr & rd for v9a asr's.
1133 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1134 (v9a_asr_reg_names): New variable.
1135 Patch from David Miller <davem@vger.rutgers.edu>.
1137 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1139 * sparc-opc.c (v9notv9a): New insn type.
1140 (IMPDEP): Move to the end to not conflict with edge8 et al.
1141 Patch from David Miller <davem@vger.rutgers.edu>.
1143 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1145 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1147 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1149 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1151 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1153 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1154 of disassemble_info structure to determine if an overlay address
1155 has a matching symbol in low memory.
1157 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1158 new symbol_at_address_func field in disassemble_info structure.
1160 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1162 * v850-opc.c (extract_d22): Use signed arithmatic.
1164 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1166 * mips-opc.c: Three op mult is not an ISA insn.
1168 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1170 * mips-opc.c: Fix formatting.
1172 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1174 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1175 than assuming that char is signed. Explicitly sign extend 16 bit
1176 values, rather than assuming that short is 16 bits.
1177 (OP_sI, OP_J, OP_DIR): Likewise.
1179 start-sanitize-v850e
1180 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1182 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1186 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1188 * v850-opc.c: Fix typo in comment.
1190 * v850-dis.c (disassemble): Add test of processor type when
1191 determining opcodes.
1193 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1195 * configure.in: Use a diversion to set enable_shared before the
1196 arguments are parsed.
1197 * configure: Rebuild.
1199 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1201 * m68k-opc.c (TBL1): Use ! rather than `.
1202 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1204 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1206 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1208 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1210 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1213 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1214 * aclocal.m4: Rebuild with new libtool.
1215 * configure: Rebuild.
1217 start-sanitize-v850e
1218 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1220 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1223 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1225 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1227 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1229 * v850-opc.c (v850_opcodes): Further rearrangements.
1232 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1234 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1237 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1239 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1242 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1244 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1246 * mips16-opc.c: Added mips16 sdbbp.
1249 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1251 * v850-opc.c: Initialise processors field of v850_opcode structure.
1254 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1256 Merge changes from Martin Hunt:
1258 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1260 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1261 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1262 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1264 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1266 * d30v-dis.c (print_insn): First operand of d*i (delayed
1267 branch) instructions is relative.
1269 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1270 (d30v_operand_table): Add IMM6S3 type.
1271 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1273 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1274 and cmp instructions.
1276 * d30v-opc.c: Correct entries for repeat*, and sat*.
1277 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1278 types. Correct several formats.
1280 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1282 * d30v-opc.c (pre_defined_registers): Change control registers.
1284 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1285 SHORT_C2. Manual was incorrect.
1287 * d30v-dis.c (lookup_opcode): Return value now indicates
1288 if an opcode has a short and a long form. Used for deciding
1289 to append a ".s" or ".l".
1290 (print_insn): Append a ".s" to an instruction if it is
1291 the short form and ".l" if it is a long form. Do not append
1292 anything if the instruction has only one possible size.
1294 * d30v-opc.c: Change mulx2h to require an even register.
1295 New form: SHORT_A2; a SHORT_A form that needs an even
1296 register as the first operand.
1298 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1299 instruction was not being disassembled if there were an odd
1300 number of instructions.
1302 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1305 start-sanitize-v850e
1306 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1308 * v850-dis.c (disassemble): Improved display of register lists.
1311 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1313 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1314 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1315 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1316 fandnot1s, fandnot2s.
1318 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1320 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1322 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1324 * cgen-asm.c (cgen_parse_address): New argument resultp.
1325 All callers updated.
1326 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1328 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1330 * mn10200-dis.c (disassemble): PC relative instructions are
1331 relative to the next instruction, not the current instruction.
1333 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1335 * v850-dis.c (disassemble): Only signed extend values that are not
1336 returned by extract functions.
1337 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1339 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1341 * v850-opc.c: Update comments. Remove use of
1342 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1344 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1346 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1348 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1350 * configure: Rebuilt with latest devo autoconf for NT support.
1352 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1354 * v850-dis.c (disassemble): Use curly brace syntax for register
1357 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1358 where r0 is being used as a destination register.
1360 start-sanitize-v850e
1361 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1363 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1366 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1368 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1369 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1370 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1371 Add insns to access SGR and DBR.
1372 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1374 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1376 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1378 start-sanitize-v850e
1379 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1381 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1382 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1385 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1387 * configure (cgen_files): Add support for v850e target.
1388 * configure.in (cgen_files): Add support for v850e target.
1390 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1392 * configure (cgen_files): Add support for v850ea target.
1393 * configure.in (cgen_files): Add support for v850ea target.
1396 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1398 * configure.in (bfd_arc_arch): Add.
1399 * configure: Rebuild.
1400 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1401 * Makefile.in: Rebuild.
1402 * arc-dis.c, arc-opc.c: New files.
1403 * disassemble.c (ARCH_all): Define ARCH_arc.
1404 (disassembler): Add ARC support.
1406 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1408 start-sanitize-v850e
1409 * v850-dis.c (disassemble): Add support for v850EA instructions.
1411 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1412 (v850_opcodes): Add v850EA instructions.
1414 * v850-dis.c (disassemble): Add support for v850E instructions.
1416 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1417 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1418 insert_spe, extract_spe): New Functions.
1419 (v850_opcodes): Add v850E instructions.
1422 * v850-opc.c: Reorganised and re-layed out to improve readability
1425 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1427 * configure: Rebuild with autoconf 2.12.1.
1429 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * aclocal.m4, configure: Rebuild with new automake patches.
1433 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1435 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1436 * acinclude.m4: Just include acinclude.m4 from BFD.
1437 * aclocal.m4, configure: Rebuild.
1439 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1441 * Makefile.am: New file, based on old Makefile.in.
1442 * acconfig.h: New file.
1443 * acinclude.m4: New file.
1444 * stamp-h.in: New file.
1445 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1446 Removed shared library handling; now handled by libtool. Replace
1447 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1448 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1449 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1450 handling in AC_OUTPUT.
1451 * dep-in.sed: Change .o to .lo.
1452 * Makefile.in: Now built with automake.
1453 * aclocal.m4: Now built with aclocal.
1454 * config.in, configure: Rebuild.
1456 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1458 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1460 start-sanitize-r5900
1461 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1463 * mips-opc.c: Fix coding of mtsa.
1466 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1468 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1470 * sparc-dis.c (sorted_opcodes): New static local.
1471 (struct opcode_hash): `opcode' is pointer to const element.
1472 (build_hash): First arg is now table of sorted pointers.
1473 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1474 (compare_opcodes): Update.
1476 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1478 * cgen-opc.c: #include <ctype.h>.
1479 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1480 Handle case insensitive hashing.
1481 (hash_keyword_value): Change type of `value' to unsigned int.
1483 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1485 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1486 precision FP, mark it as such. Likewise for double precision
1487 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1489 start-sanitize-r5900
1490 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1493 start-sanitize-r5900
1494 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1496 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1497 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1500 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1502 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1504 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1505 nesting depth when all the macros are expanded.
1507 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1509 * sparc-opc.c: The fcmp v9a instructions take an integer register
1510 as a destination, not a floating point register. From Christian
1511 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1513 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1515 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1516 syntax. From Roman Hodek
1517 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1519 * i386-dis.c (twobyte_has_modrm): Fix pand.
1521 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1523 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1525 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1527 * arm-dis.c: Add prototypes for arm_decode_shift and
1530 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1532 * mips-opc.c: Add r3900 insns.
1534 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1536 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1537 print delay slot instructions on the same line. When using a PC
1538 relative load, add a comment with the value being loaded if it can
1541 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1543 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1544 to pushS/popS for segment regs and byte constant so that
1545 pushw/popw printed when in 16 bit data mode.
1547 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1548 print cbtw, cwtd in 16 bit data mode.
1549 * i386-dis.c (putop): extra case W to support above.
1551 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1552 address size prefix in 16 bit address mode.
1554 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1556 * sh-dis.c: Reindent. Rename local variable fprintf to
1559 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1561 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1563 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1565 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1567 * mips16-opc.c (mip16_opcodes): same.
1569 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1571 * m68k-opc.c (moveb): Change $d to %d.
1573 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1575 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1576 (twobyte_has_modrm): Likewise.
1578 (OP_MMX, OP_EM, OP_MS): New static functions.
1580 * i386-dis.c: Revert patch of April 4. The output now matches
1583 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1585 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1588 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1590 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1592 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1594 * Makefile.in (install): Depend upon installdirs.
1595 (installdirs): New target.
1597 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1599 From Thomas Graichen <graichen@rzpd.de>:
1600 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1601 * configure: Rebuild.
1603 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1605 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1606 Delete string{,s}.h support.
1608 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1610 * cgen-asm.c (cgen_parse_operand_fn): New global.
1611 (cgen_parse_{{,un}signed_integer,address}): Update call to
1612 cgen_parse_operand_fn.
1613 (cgen_init_parse_operand): New function.
1614 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1615 from cgen_asm_init_parse.
1616 (m32r_cgen_assemble_insn): New operand `errmsg'.
1617 Delete call to as_bad, return error message to caller.
1618 (m32r_cgen_asm_hash_keywords): #if 0 out.
1620 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1622 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1624 [case 'J']: Fix typo in register name.
1626 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1628 * configure.in: Substitute SHLIB_LIBS.
1629 * configure: Rebuild.
1630 * Makefile.in (SHLIB_LIBS): New variable.
1631 ($(SHLIB)): Use $(SHLIB_LIBS).
1633 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1635 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1637 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1639 * disassemble.c (disassembler): Handle m32r.
1641 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1643 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1644 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1645 * Makefile.in (CFILES): Add them.
1646 (ALL_MACHINES): Add them.
1647 (dependencies): Regenerate.
1648 * configure.in (cgen_files): New variable.
1649 (bfd_m32r_arch): Add entry.
1650 * configure: Regenerate.
1652 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1654 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1655 * configure: Rebuild.
1657 * Makefile.in: Rebuild dependencies.
1659 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1661 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1664 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1666 * Branched binutils 2.8.
1668 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1670 * m10200-dis.c: Rename from mn10200-dis.c.
1671 * m10200-opc.c: Rename from mn10200-opc.c.
1672 * m10300-dis.c: Rename from mn10300-dis.c
1673 * m10300-opc.c: Rename from mn10300-opc.c.
1674 * Makefile.in: Update accordingly.
1676 * mips16-opc.c: Add mul and dmul macros.
1678 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1680 * makefile.vms: Update CFLAGS, add clean target.
1682 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * mips-opc.c: Add "wait". From Ralf Baechle
1685 <ralf@gnu.ai.mit.edu>.
1687 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1688 * configure, config.in: Rebuild.
1689 * sysdep.h: Include <stdlib.h> if it exists.
1690 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1692 * Makefile.in: Rebuild dependencies.
1694 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1696 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1697 Andrew Bray <andy@madhouse.demon.co.uk>.
1699 * mips-opc.c: Add cast when setting mips_opcodes.
1701 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1703 * v850-dis.c (disassemble): Fix sign extension problem.
1704 * v850-opc.c (extract_d*): Fix sign extension problems to make
1705 disassembly calculate branch offsets correctly.
1707 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1709 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1711 * mips-opc.c: Add dctr and dctw.
1714 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1716 * d30v-dis.c (print_insn): Change the way signed constants
1719 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1721 * Makefile.in (BFD_H): New variable.
1722 (HFILES): New variable.
1723 (CFILES): Add all C files.
1724 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1725 Delete old dependencies, and build new ones.
1726 * dep-in.sed: New file.
1728 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1730 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1732 start-sanitize-coldfire
1733 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1735 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1738 end-sanitize-coldfire
1739 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1741 * mn10200-opc.c: Change "trap" to "syscall".
1742 * mn10300-opc.c: Add new "syscall" instruction.
1744 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1746 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1747 mulul insns on the coldfire.
1749 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1751 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1752 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1753 (print_insn_little_arm): Likewise.
1755 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1757 Based on patches from H.J. Lu <hjl@lucon.org>:
1758 * i386-dis.c (fetch_data): Add prototype.
1759 * m68k-dis.c (fetch_data): Add prototype.
1760 (dummy_print_address): Add prototype. Make static.
1761 * ppc-opc.c (valid_bo): Add prototype.
1762 * sparc-dis.c (build_hash_table): Add prototype.
1763 (is_delayed_branch, compute_arch_mask): Add prototypes.
1764 (print_insn_sparc): Make several local variables const.
1765 (compare_opcodes): Change arguments to const PTR. Add prototype.
1766 * sparc-opc.c (arg): Change name field to be const.
1767 (lookup_name, lookup_value): Add prototypes. Change table and
1768 name parameters to be const.
1769 (sparc_encode_asi): Change name parameter to be const.
1770 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1771 (sparc_encode_sparclet_cpreg): Likewise.
1772 (sparc_decode_asi): Change return type to be const.
1773 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1774 (sparc_decode_sparclet_cpreg): Likewise.
1776 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1778 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1779 Solaris doesn't like the combined options, and the -f is
1781 (stamp-tshlink, install): Likewise.
1783 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1785 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1788 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1790 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1792 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1794 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1797 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1799 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1801 start-sanitize-tic80
1802 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1804 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1806 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1808 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1811 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1813 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1814 floatformat_to_double to make portable.
1815 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1818 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1820 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1821 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1823 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1825 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1826 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1828 start-sanitize-tic80
1829 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1831 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1832 (OFF_SL_BR_SCALED): ... to this, and added the flag
1833 TIC80_OPERAND_BASEREL to the flags word.
1834 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1838 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1840 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1841 Change mips_opcodes from const array to a pointer,
1842 and change bfd_mips_num_opcodes from const int to int,
1843 so that we can increase the size of the mips opcodes table
1846 start-sanitize-tic80
1847 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1849 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1850 store BITNUM values in the table in one's complement form
1851 to match behavior when assembler is given a raw numeric
1852 value for a BITNUM operand.
1853 * tic80-dis.c (print_operand_bitnum): Ditto.
1857 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1859 * d30v-opc.c: Removed references to FLAG_X.
1862 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1864 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1867 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1869 * Makefile.in: Added d30v object files.
1870 * configure: (bfd_d30v_arch) Rebuilt.
1871 * configure.in: (bfd_d30v_arch) Added new case.
1872 * d30v-dis.c: New file.
1873 * d30v-opc.c: New file.
1874 * disassemble.c (disassembler) Add entry for d30v.
1877 start-sanitize-tic80
1878 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1880 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1881 representations for the floating point BITNUM values.
1883 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1885 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1886 in the table in one's complement form, as they appear in the
1888 (tic80_symbol_to_value): Use macros to access predefined
1890 (tic80_value_to_symbol): Ditto.
1891 (tic80_next_predefined_symbol): New function.
1892 * tic80-dis.c (print_operand_bitnum): Remove code that did
1893 one's complement for BITNUM values.
1896 start-sanitize-r5900
1897 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1899 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1902 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1904 * makefile.vms: Remove 8 bit characters. Update to latest
1907 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1909 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1911 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1913 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1914 (IMM24_PCREL): Likewise.
1916 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1918 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1919 address for an extended PC relative instruction that is not a
1922 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1924 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1927 start-sanitize-tic80
1928 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1930 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1931 (tic80_opcodes): Sort entries so that long immediate forms
1932 come after short immediate forms, making it easier for
1933 assembler to select the right one for a given operand.
1936 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1938 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1940 (print_insn_mips16): Likewise.
1942 start-sanitize-r5900
1943 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1945 * mips-opc.c: add r5900.
1948 start-sanitize-tic80
1949 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1951 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1952 a symbol class that restricts translation to just that
1953 class (general register, condition code, etc).
1955 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1957 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1958 and REG_DEST_E for register operands that have to be
1959 an even numbered register. Add REG_FPA for operands that
1960 are one of the floating point accumulator registers.
1961 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1962 (tic80_opcodes): Change entries that need even numbered
1963 register operands to use the new operand table entries.
1964 Add "or" entries that are identical to "or.tt" entries.
1967 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * mips16-opc.c: Add new cases of exit instruction for
1971 * mips-dis.c (print_mips16_insn_arg): Display floating point
1972 registers in operands of exit instruction. Print `$' before
1973 register names in operands of entry and exit instructions.
1975 start-sanitize-tic80
1976 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1978 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1979 pairs for all predefined symbols recognized by the assembler.
1980 Also used by the disassembling routines.
1981 (tic80_symbol_to_value): New function.
1982 (tic80_value_to_symbol): New function.
1983 * tic80-dis.c (print_operand_control_register,
1984 print_operand_condition_code, print_operand_bitnum):
1985 Remove private tables and use tic80_value_to_symbol function.
1988 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1990 * d10v-dis.c (print_operand): Change address printing
1991 to correctly handle PC wrapping. Fixes PR11490.
1993 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1995 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1998 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2000 * mips-dis.c (print_insn_mips16): Set insn_info information.
2001 (print_mips16_insn_arg): Likewise.
2003 * mips-dis.c (print_insn_mips16): Better handling of an extend
2004 opcode followed by an instruction which can not be extended.
2006 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2008 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2009 coldfire moveb instruction to not allow an address register as
2010 destination. Although the documentation does not indicate that
2011 this is invalid, experiments uncovered unexpected behavior.
2012 Added a comment explaining the situation. Thanks to Andreas
2013 Schwab for pointing this out to me.
2015 start-sanitize-tic80
2016 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2018 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2019 entries are presorted so that entries with the same mnemonic are
2020 adjacent to each other in the table. Sort the entries for each
2021 instruction so that this is true.
2024 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2026 * m68k-dis.c: Include <libiberty.h>.
2027 (print_insn_m68k): Sort the opcode table on the most significant
2028 nibble of the opcode.
2030 start-sanitize-tic80
2031 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2033 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2034 "vsub", "vst", "xnor", and "xor" instructions.
2035 (V_a1): Renamed from V_a, msb of accumulator reg number.
2036 (V_a0): Add macro, lsb of accumulator reg number.
2038 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2040 * tic80-dis.c (print_insn_tic80): Broke excessively long
2041 function up into several smaller ones and arranged for
2042 the instruction printing function to be callable recursively
2043 to print vector instructions that have both a load and a
2044 math instruction packed into a single opcode.
2045 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2046 to explain why it comes after the other vector opcodes.
2049 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2051 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2052 move insns to handle immediate operands.
2054 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2056 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2057 fix operand mask in the "moveml" entries for the coldfire.
2059 start-sanitize-tic80
2060 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2062 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2063 New macros for building vector instruction opcodes.
2064 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2065 FMT_LI, which were unused. The field is now a flags field.
2066 Remove some opcodes that are possible, but illegal, such
2067 as long immediate instructions with doubles for immediate
2068 values. Add "vadd" and "vld" instructions.
2070 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2072 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2073 the order more logical. Move the shift alias instructions ("rotl",
2074 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2075 interspersed with the regular sr.x and sl.x instructions. Add
2076 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2077 "sub", "subu", "swcr", and "trap".
2079 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2081 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2082 (OFF_SL_PC): Renamed from OFF_SL.
2083 (OFF_SS_BR): New operand type for base relative operand.
2084 (OFF_SL_BR): New operand type for base relative operand.
2085 (REG_BASE): New operand type for base register operand.
2086 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2087 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2088 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2090 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2091 10 char field, padded with spaces on rhs, rather than a string
2092 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2093 than old TIC80_OPERAND_RELATIVE. Add support for new
2094 TIC80_OPERAND_BASEREL flag bit.
2096 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2098 * tic80-dis.c (print_insn_tic80): Print floating point operands
2100 * tic80-opc.c (SPFI): Add single precision floating point
2101 immediate operand type.
2102 (ROTATE): Add rotate operand type for shifts.
2103 (ENDMASK): Add for shifts.
2104 (n): Macro for the 'n' bit.
2105 (i): Macro for the 'i' bit.
2106 (PD): Macro for the 'PD' field.
2107 (P2): Macro for the 'P2' field.
2108 (P1): Macro for the 'P1' field.
2109 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2113 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2115 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2116 adding in current address for pc-relative operands.
2118 start-sanitize-tic80
2119 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2121 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2122 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2123 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2124 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2125 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2126 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2127 (REG_SCALED, LSI_SCALED): New operand types.
2128 (E): New macro for 'E' bit at bit 27.
2129 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2130 opcodes, including the various size flavors (b,h,w,d) for
2131 the direct load and store instructions.
2133 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2135 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2137 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2138 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2139 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2140 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2141 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2142 masks with "MASK_* & ~M_*" to get the M bit reset.
2143 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2145 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2147 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2148 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2149 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2151 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2152 CC, SICR, and LICR table entries.
2153 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2154 "bcnd", and "brcr" opcodes.
2157 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2159 * ppc-opc.c (powerpc_operands): Make comment match the
2160 actual fields (no shift field).
2161 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2162 start-sanitize-tic80
2163 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2164 partial implementation, work in progress.
2165 * tic80-opc.c (tic80_operands): Begin construction operands table.
2166 (tic80_opcodes): Continue populating opcodes table and start
2167 filling in the operand indices.
2168 (tic80_num_opcodes): Add this.
2171 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * m68k-opc.c: Add #B case for moveq.
2175 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2177 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2178 before they are used.
2180 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2182 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2183 for "breakpoint" instruction.
2185 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2187 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2188 (dep): Use ALL_CFLAGS rather than CFLAGS.
2190 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2192 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2195 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2197 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2198 start-sanitize-tic80
2199 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2202 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2204 * mips16-opc.c: Add "abs".
2206 start-sanitize-tic80
2207 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2209 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2210 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2211 (disassembler): Add bfd_arch_tic80 support to set disassemble
2212 to print_insn_tic80.
2213 * tic80-dis.c (print_insn_tic80): Add stub.
2215 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2217 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2218 * configure: Regenerate with autoconf.
2219 * tic80-dis.c: Add file.
2220 * tic80-opc.c: Add file.
2223 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2225 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2227 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2229 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2230 (mn10200_opcodes): Use it for some logicals and btst insns.
2231 Add "break" and "trap" instructions.
2233 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2235 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2237 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2239 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2240 relative load or add now depends upon whether the instruction is
2243 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2245 * mn10200-dis.c: Finish writing disassembler.
2246 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2247 Fix mask for "jmp (an)".
2249 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2250 handle endianness issues for mn10300.
2252 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2254 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2256 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2257 instruction. Fix opcode field for "movb (imm24),dn".
2259 * mn10200-opc.c (mn10200_operands): Fix insertion position
2262 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2264 * mn10200-opc.c: Create mn10200 opcode table.
2265 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2266 but moving along nicely.
2268 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2270 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2272 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2274 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2275 specifiers for fmovem* instructions.
2277 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2279 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2281 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2283 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2286 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2288 * mn10300-opc.c: Add some comments explaining the various
2291 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2293 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2295 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2298 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2299 operand specifiers in fmovm* instructions.
2301 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2303 * ppc-opc.c (insert_li): Give an error if the offset has the two
2304 least significant bits set.
2306 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2308 * mips-dis.c (print_insn_mips16): Separate the instruction from
2309 the arguments with a tab, not a space.
2311 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2313 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2316 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2319 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2321 * configure: Rebuild with autoconf 2.12.
2323 Add support for mips16 (16 bit MIPS implementation):
2324 * mips16-opc.c: New file.
2325 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2326 (mips16_reg_names): New static array.
2327 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2328 after seeing a 16 bit symbol.
2329 (print_insn_little_mips): Likewise.
2330 (print_insn_mips16): New static function.
2331 (print_mips16_insn_arg): New static function.
2332 * mips-opc.c: Add jalx instruction.
2333 * Makefile.in (mips16-opc.o): New target.
2334 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2335 * configure: Rebuild.
2337 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2339 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2340 operand specifiers in *save, *restore and movem* instructions.
2342 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2345 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2346 register operands for immediate arithmetic, not, neg, negx, and
2347 set according to condition instructions.
2349 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2350 specifier of the effective-address operand in immediate forms of
2351 arithmetic instructions. The specifier for the immediate operand
2352 notes how and where the constant will be stored.
2354 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2356 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2359 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2362 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2364 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2366 * mn10300-dis.c (disassemble): Handle register lists.
2368 * mn10300-opc.c: Fix handling of register list operand for
2369 "call", "ret", and "rets" instructions.
2371 * mn10300-dis.c (disassemble): Print PC-relative and memory
2372 addresses symbolically if possible.
2373 * mn10300-opc.c: Distinguish between absolute memory addresses,
2374 pc-relative offsets & random immediates.
2376 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2378 (disassemble): Handle SPLIT and EXTENDED operands.
2380 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2382 * mn10300-dis.c: Rough cut at printing some operands.
2384 * mn10300-dis.c: Start working on disassembler support.
2385 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2387 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2389 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2391 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2393 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2395 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2397 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2398 register argument is calls and jmp instructions.
2400 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2402 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2403 getx operand. Fix opcode for mulqu imm,dn.
2405 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2407 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2408 in MN10300_OPERAND_SPLIT operands for how many bits
2409 appear in the basic insn word. Add IMM32_HIGH24,
2410 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2411 (mn10300_opcodes): Use new operands as needed.
2413 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2414 for bset, bclr, btst instructions.
2415 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2417 * mn10300-opc.c (mn10300_operands): Remove many redundant
2418 operands. Update opcode table as appropriate.
2419 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2420 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2422 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2424 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2425 operands (for indexed load/stores). Fix bitpos for DI
2426 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2427 few instructions that insert immediates/displacements in the
2428 middle of the instruction. Add IMM8E for 8 bit immediate in
2429 the extended part of an instruction.
2430 (mn10300_operands): Use new opcodes as appropriate.
2432 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2434 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2435 sequential so the assembler never parallelizes it with
2438 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2440 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2441 a data/address register that appears in register field 0
2442 and register field 1.
2443 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2445 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2447 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2448 standard disassembly.
2450 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2451 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2452 Recategorize PALcode instructions.
2454 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2456 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2458 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2460 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2461 there are no operand types.
2463 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2465 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2467 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2469 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2471 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2473 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2475 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2476 and sst.w instructions.
2478 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2481 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2483 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2486 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2488 * ppc-opc.c (PPCPWR2): Define.
2489 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2492 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2494 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2495 field for movhu instruction.
2497 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2498 cast value to "long" not "signed long" to keep hpux10
2501 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2503 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2506 * mn10300-opc.c (FMT*): Remove definitions.
2508 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2509 for shift-by-register opcodes.
2511 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2512 into [AD][MN][01] for encoding the position of the register
2515 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2517 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2518 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2520 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2522 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2523 Fix various typos. Add "PAREN" operand.
2524 (MEM, MEM2): Define.
2525 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2526 operands. Fix several typos.
2528 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2531 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2533 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2534 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2536 (mn10300_opcodes): Break opcode format out into its own field.
2537 Update many operand fields to deal with signed vs unsigned
2538 issues. Fix one or two typos in the "mov" instruction
2539 opcode, mask and/or operand fields.
2541 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2543 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2544 m68851 wasn't reset.
2546 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2548 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2549 all opcodes. Very rough cut at operands for all opcodes.
2551 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2554 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2556 * mn10200-opc.c, mn10300-opc.c: New files.
2557 * mn10200-dis.c, mn10300-dis.c: New files.
2558 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2559 * disassemble.c: Break mn10x00 support into 10200 and 10300
2561 * configure.in: Likewise.
2562 * configure: Rebuilt.
2564 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2566 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2568 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2570 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2572 * disassemble (ARCH_mn10x00): Define.
2573 (disassembler): Handle bfd_arch_mn10x00.
2574 * configure.in: Recognize bfd_mn10x00_arch.
2575 * configure: Rebuilt.
2577 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2579 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2580 accordingly. Don't declare functions using op_rtn.
2582 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2584 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2585 params to be more standard.
2586 * (disassemble): Print absolute addresses and symbolic names for
2587 branch and jump targets.
2588 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2590 * (v850_opcodes): Add breakpoint insn.
2592 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2594 * m68k-opc.c: Move the fmovemx data register cases before the
2595 other cases, so that they get recognized before the data register
2596 does gets treated as a degenerate register list.
2598 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2600 * mips-opc.c: Add a case for "div" and "divu" with two registers
2601 and a destination of $0.
2603 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2605 * mips-dis.c (print_insn_arg): Add prototype.
2606 (_print_insn_mips): Ditto.
2608 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2610 * mips-dis.c (print_insn_arg): Print condition code registers as
2613 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2615 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2617 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2619 * v850-dis.c (disassemble): Make static. Provide prototype.
2621 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2623 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2626 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2628 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2629 ']' characters into the output stream.
2630 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2631 Add "memop" field to all opcodes (for the disassembler).
2632 Reorder opcodes so that "nop" comes before "mov" and "jr"
2633 comes before "jarl".
2635 * v850-dis.c (print_insn_v850): Fix typo in last change.
2637 * v850-dis.c (print_insn_v850): Properly handle disassembling
2638 a two byte insn at the end of a memory region when the memory
2639 region's size is only two byte aligned.
2641 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2643 * v850-dis.c (v850_reg_names): Define.
2644 (v850_sreg_names, v850_cc_names): Likewise.
2645 (disassemble): Very rough cut at printing operands (unformatted).
2647 * v850-opc.c (BOP_MASK): Fix.
2648 (v850_opcodes): Fix mask for jarl and jr.
2650 * v850-dis.c: New file. Skeleton for disassembler support.
2651 * Makefile.in Remove v850 references, they're not needed here.
2652 * configure.in: Add v850-dis.o when building v850 toolchains.
2653 * configure: Rebuilt.
2654 * disassemble.c (disassembler): Call v850 disassembler.
2656 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2657 (insert_d8_6, extract_d8_6): New functions.
2658 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2659 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2661 (IF4A, IF4B): Use "D7" instead of "D7S".
2662 (IF4C, IF4D): Use "D8_7" instead of "D8".
2663 (IF4E, IF4F): New. Use "D8_6".
2664 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2665 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2667 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2668 (v850_operands): Change D16 to D16_15, use special insert/extract
2669 routines. New new D16 that uses the generic insert/extract code.
2670 (IF7A, IF7B): Use D16_15.
2671 (IF7C, IF7D): New. Use D16.
2672 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2674 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2675 message. Issue an error if the branch offset is odd.
2677 * v850-opc.c: Add notes about needing special insert/extract
2678 for all the load/store insns, except "ld.b" and "st.b".
2680 * v850-opc.c (insert_d22, extract_d22): New functions.
2681 (v850_operands): Use insert_d22 and extract_d22 for
2683 (insert_d9): Fix range check.
2685 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2687 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2688 and set bits field to D9 and D22 operands.
2690 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2692 * v850-opc.c (v850_operands): Define SR2 operand.
2693 (v850_opcodes): "ldsr" uses R1,SR2.
2695 * v850-opc.c (v850_opcodes): Fix opcode specs for
2696 sld.w, sst.b, sst.h, sst.w, and nop.
2698 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2700 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2701 end of the opcode table.
2703 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2705 * d10v-opc.c (pre_defined_registers): Added register pairs,
2706 "r0-r1", "r2-r3", etc.
2708 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2710 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2711 Create I16U for an unsigned 16bit mmediate operand.
2712 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2714 * v850-opc.c (v850_operands): Define EP operand.
2715 (IF4A, IF4B, IF4C, IF4D): Use EP.
2717 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2718 with immediate operand, "movhi". Tweak "ldsr".
2720 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2721 correct. Get sld.[bhw] and sst.[bhw] closer.
2723 * v850-opc.c (v850_operands): "not" is a two byte insn
2725 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2727 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2729 * v850-opc.c (two): Get order of words correct.
2731 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2733 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2734 register source and destination operands.
2735 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2737 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2738 same thinko in "trap" opcode.
2740 * v850-opc.c (v850_opcodes): Add initializer for size field
2743 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2744 Add D8 for 8-bit unsigned field in short load/store insns.
2745 (IF4A, IF4D): These both need two registers.
2746 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2747 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2748 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2749 for "ldsr" and "stsr".
2750 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2753 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2754 short store word (sst.w).
2756 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2758 * v850-opc.c (v850_operands): Added insert and extract fields,
2759 pointers to functions that handle unusual operand encodings.
2761 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2763 * v850-opc.c (v850_opcodes): Enable "trap".
2765 * v850-opc.c (v850_opcodes): Fix order of displacement
2766 and register for "set1", "clr1", "not1", and "tst1".
2768 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2770 * v850-opc.c (v850_operands): Add "B3" support.
2771 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2774 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2776 * v850-opc.c: Close unterminated comment.
2778 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2780 * v850-opc.c (v850_operands): Add flags field.
2781 (v850_opcodes): add move opcodes.
2783 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2785 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2786 * configure: (bfd_v850v_arch) Add new case.
2787 * configure.in: (bfd_v850_arch) Add new case.
2788 * v850-opc.c: New file.
2790 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2792 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2794 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2796 * d10v-opc.c: Add additional information to the opcode
2797 table to help determinine which instructions can be done
2800 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2802 * mpw-make.sed: Update editing of include pathnames to be
2805 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2807 * arm-opc.h: Added "bx" instruction definition.
2809 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2811 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2813 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2815 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2817 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2819 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2821 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2823 * makefile.vms: Update for alpha-opc changes.
2825 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2827 * i386-dis.c (print_insn_i386): Actually return the correct value.
2828 (ONE, OP_ONE): #ifdef out; not used.
2830 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2832 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2833 Changed subi operand type to treat 0 as 16.
2835 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2837 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2840 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2842 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2843 memory transfer instructions. Add new format string entries %h and %s.
2844 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2847 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2849 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2850 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2852 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2854 * alpha-dis.c (print_insn_alpha_osf): Remove.
2855 (print_insn_alpha_vms): Remove.
2856 (print_insn_alpha): Make globally visible. Chose the register
2857 names based on info->flavour.
2858 * disassemble.c: Always return print_insn_alpha for the alpha.
2860 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2862 * d10v-dis.c (dis_long): Handle unknown opcodes.
2864 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2866 * d10v-opc.c: Changes to support signed and unsigned numbers.
2867 All instructions with the same name that have long and short forms
2868 now end in ".l" or ".s". Divs added.
2869 * d10v-dis.c: Changes to support signed and unsigned numbers.
2871 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2873 * d10v-dis.c: Change all functions to use info->print_address_func.
2875 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2877 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2878 move ccr/sr insns more strict so that the disassembler only
2879 selects them when the addressing mode is data register.
2881 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2882 * d10v-opc.c (pre_defined_registers): Declare.
2883 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2884 to pick a better name for the registers.
2886 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2888 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2889 operands for fexpand and fpmerge. From Christian Kuehnke
2890 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2892 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2894 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2895 print routine. Take new regnames and cpumask arguments.
2896 Kill the environment variable nonsense.
2897 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2898 (print_insn_alpha_vms): New function. Do VMS style regnames.
2899 * disassemble.c (disassembler): Test bfd flavour to pick
2900 between OSF and VMS routines. Default to OSF.
2902 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2904 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2905 * configure: Rebuild.
2906 * Makefile.in (install): Use @INSTALL_SHLIB@.
2908 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2910 * configure: (bfd_d10v_arch) Add new case.
2911 * configure.in: (bfd_d10v_arch) Add new case.
2912 * d10v-dis.c: New file.
2913 * d10v-opc.c: New file.
2914 * disassemble.c (disassembler) Add entry for d10v.
2916 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2918 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2919 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2921 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2923 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2924 distinguish between variants of the instruction set.
2925 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2926 distinguish between variants of the instruction set.
2928 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2930 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2931 the 8086 instruction set.
2932 * i386-dis.c: General cleanups. Make most things static. Add
2933 prototypes. Get rid of static variables aflags and dflags. Pass
2934 them as args (to almost everything).
2936 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2938 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2940 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2942 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2943 if the next arg is marked with SRC_IN_DST. Gross.
2945 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2946 we're looking for and find EXR.
2948 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2949 if we're looking for KBIT and we don't find it.
2951 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2954 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2955 3bit immediate operands.
2957 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2959 * Released binutils 2.7.
2961 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2962 <kkaempf@progis.ac-net.de>.
2964 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2966 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2968 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2970 * sparc-dis.c (print_insn_sparclite): New routine to print
2971 sparclite instructions.
2973 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2975 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2977 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2979 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2980 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2981 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2983 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2985 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2986 Use autoconf-set values.
2987 (docdir, oldincludedir): Removed.
2988 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2990 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2992 * alpha-opc.c: New file.
2993 * alpha-opc.h: Remove.
2994 * alpha-dis.c: Complete rewrite to use new opcode table.
2995 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2996 * configure: Rebuild with autoconf 2.10.
2997 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2998 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3000 (alpha-opc.o): New target.
3002 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3005 Set imm_added_to_rs1 even if the source and destination register
3008 * sparc-opc.c: Add some two operand forms of the wr instruction.
3010 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3012 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3015 * disassemble.c (disassembler): Handle H8/S.
3016 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3018 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3020 * sparc-opc.c: Add beq/teq as aliases for be/te.
3022 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3023 <sergei@msil.sps.mot.com>.
3025 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3027 * makefile.vms: New file.
3029 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3031 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3033 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3036 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3038 * i386-dis.c (OP_OFF): Call append_prefix.
3040 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3042 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3043 unsigned long to silence a warning from the Solaris PowerPC
3046 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3048 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3050 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3052 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3054 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3055 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3056 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3057 cpush, cpusha, cpull sparclet insns.
3059 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3061 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3063 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3065 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3066 Set F_FLOAT on other floating point instructions.
3068 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3070 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3072 (powerpc_opcodes): Add 860/821 specific SPRs.
3074 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3076 * configure.in: Permit --enable-shared to specify a list of
3077 directories. Set and substitute BFD_PICLIST.
3078 * configure: Rebuild.
3079 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3080 uses. Set to @BFD_PICLIST@.
3082 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3084 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3085 not "abs", which may be needed for the absolute in something
3086 like btst #0,@10:8. Print L_3 immediates separately from other
3087 immediates. Change ABSMOV reference to ABS8MEM.
3089 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3091 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3092 (current_arch_mask): New static global.
3093 (compute_arch_mask): New static function.
3094 (print_insn_sparc): Delete sparc_v9_p. New static local
3095 current_mach. Resort opcode table if current_mach changes.
3096 Generalize "insn not supported" test.
3097 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3098 Delete test for v9/!v9.
3099 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3101 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3102 (brfcx): Renamed to FBRX.
3103 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3104 coprocessor mnemonics are not supported on the sparclet).
3105 (condf): Renamed to CONDF.
3106 (SLCBCC2): Delete F_ALIAS flag.
3108 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3110 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3111 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3113 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3115 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3116 that the shared library version number is set correctly.
3118 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3120 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3121 Miles Bader <miles@gnu.ai.mit.edu>.
3122 * configure: Rebuild.
3124 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3126 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3129 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3131 * configure: Rebuild with autoconf 2.8.
3133 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3135 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3136 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3138 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3140 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3141 since they appear as targets in Makefile.in.
3142 * configure: Rebuild.
3144 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3146 * mpw-make.sed: Edit out shared library support bits.
3148 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3150 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3151 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3152 (sparc_opcodes): Add sparclet insns.
3153 (sparclet_cpreg_table): New static local.
3154 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3155 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3157 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3159 * i386-dis.c (index16): New static variable.
3160 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3162 (OP_indirE): Return result of OP_E.
3163 (OP_E): Check for 16 bit addressing mode, and disassemble
3164 correctly. Optimised 32 bit case a little. Don't print
3165 "(base,index,scale)" when sib specifies only an offset.
3167 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3169 * configure.in: Set and substitute SHLIB_DEP.
3170 * configure: Rebuild.
3171 * Makefile.in (SHLIB_DEP): New variable.
3172 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3173 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3174 COMMON_SHLIB, add them to piclist with appropriate modifications.
3175 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3176 here: just use piclist.
3178 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3180 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3181 (print_insn_sparc): Rewrite v9/not-v9 tests.
3182 (compare_opcodes): Likewise.
3183 * sparc-opc.c (MASK_<ARCH>): Define.
3184 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3185 (sparclet,v6notv9): Define.
3186 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3187 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3189 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3191 * configure.in: Call AC_PROG_CC before configure.host.
3192 * configure: Rebuild.
3194 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3196 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3198 * i386-dis.c (onebyte_has_modrm): New static array.
3199 (twobyte_has_modrm): New static array.
3200 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3202 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3204 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3207 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3209 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3212 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3214 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3215 m68010up, not just m68020up | cpu32.
3217 * Makefile.in (SONAME): New variable.
3218 ($(SHLINK)): Make a link to the transformed name, as well.
3219 (stamp-tshlink): New target.
3220 (install): Skip stamp-tshlink during install.
3222 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3224 * configure.in: Call AC_ARG_PROGRAM.
3225 * configure: Rebuild.
3226 * Makefile.in (program_transform_name): New variable.
3227 (install): Transform library name before installing it.
3229 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3231 * i960-dis.c (mem): Add HX dcinva instruction.
3233 Support for building as a shared library, based on patches from
3234 Alan Modra <alan@spri.levels.unisa.edu.au>:
3235 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3236 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3237 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3238 * configure: Rebuild.
3239 * Makefile.in (ALLLIBS): New variable.
3240 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3241 (COMMON_SHLIB, SHLINK): New variables.
3242 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3243 (STAGESTUFF): Remove variable.
3244 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3245 (stamp-piclist, piclist): New targets.
3246 ($(SHLIB), $(SHLINK)): New targets.
3247 ($(OFILES)): Depend upon stamp-picdir.
3248 (disassemble.o): Build twice if PICFLAG is set.
3249 (MOSTLYCLEAN): Add pic/*.o.
3250 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3251 (distclean): Remove pic and stamp-picdir.
3252 (install): Install shared libraries.
3253 (stamp-picdir): New target.
3255 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3257 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3258 Print unknown instruction as "unknown", rather than in hex.
3260 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3262 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3264 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3266 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3268 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3270 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3271 when necessary. From Ulrich Drepper
3272 <drepper@myware.rz.uni-karlsruhe.de>.
3274 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3276 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3277 sparc_num_opcodes. Update architecture enum values.
3278 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3279 (sparc_opcode_lookup_arch): New function.
3280 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3281 (sparc_opcodes): Add v9a shutdown insn.
3283 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3285 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3286 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3288 (print_insn_sparc64): Deleted.
3289 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3292 * sparc-opc.c (architecture_pname): Add v9a.
3294 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3296 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3297 incorrectly defined as 0x16 when it should be 0x15.
3298 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3299 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3300 excb (exception barrier) which is defined in the Alpha
3301 Architecture Handbook version 2.
3302 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3303 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3304 disassembled as or, for example.
3306 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3308 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3309 (_print_insn_mips): Change i from int to unsigned int.
3311 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3313 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3314 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3316 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3318 * i386-dis.c: Added Pentium Pro instructions.
3320 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3322 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3325 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3327 * sh-opc.h (sh_nibble_type): Added REG_B.
3328 (sh_arg_type): Added A_REG_B.
3329 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3331 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3333 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3335 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3337 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3339 * Makefile.in (distclean): Remove stamp-h. From Ronald
3340 F. Guilmette <rfg@monkeys.com>.
3342 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3344 From David Mosberger-Tang <davidm@azstarnet.com>:
3345 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3348 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3350 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3351 (sh_table): Added many SH3 opcodes.
3352 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3354 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3356 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3357 (subco,subco.): Mark this PPC, not PPCCOM.
3359 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3361 * configure: Rebuild with autoconf 2.7.
3363 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3365 * configure: Rebuild with autoconf 2.6.
3367 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3369 * configure.in: Sort list of architectures. Accept but do nothing
3370 for alliant, convex, pyramid, romp, and tahoe.
3372 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3374 * a29k-dis.c (print_special): Change num to unsigned int.
3376 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3378 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3381 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3383 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3384 * configure: Rebuilt.
3386 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3388 * configure.in: Add case for bfd_i860_arch.
3389 * configure: Rebuild.
3391 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3393 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3394 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3395 (NEXTDOUBLE): Likewise.
3396 (print_insn_m68k): Don't match fmoveml if there is more than one
3397 register in the list.
3398 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3400 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3402 * m68k-opc.c: Use #W rather than #w.
3403 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3405 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3407 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3408 and likewise for all the dbxx opcodes.
3410 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3412 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3414 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3416 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3417 the VR4100 specific instructions to the mips_opcodes structure.
3419 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3421 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3422 ugly Metrowerks bug in CW6, is fixed in CW7.
3424 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3426 * ppc-opc.c (whole file): Add flags for common/any support.
3428 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3430 * Makefile.in (BISON): Remove macro.
3431 (FLAGS_TO_PASS): Remove BISON.
3433 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3435 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3437 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3438 instructions that take no args by looking at the match mask.
3439 (print_insn_arg): Always print "%" before register names.
3440 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3441 [case '_']: Don't print "@#" before address.
3442 [case 'J']: Use "%s" as format string, not register name.
3443 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3445 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3447 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3450 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3452 From David Mosberger-Tang <davidm@azstarnet.com>
3454 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3455 (alpha_insn_set): added definitions for VAX floating point
3456 instructions (Unix compilers don't generate these, but handcoded
3457 assembly might still use them).
3459 * alpha-dis.c (print_insn_alpha): added support for disassembling
3460 the miscellaneous instructions in the Alpha instruction set.
3462 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3464 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3465 no longer create sysdep.h, sed ppc-opc.c to work around a
3466 serious Metrowerks C bug.
3467 * mpw-make.in: Remove.
3468 * mpw-make.sed: New file, used by mpw-configure to edit
3469 Makefile.in into an MPW makefile.
3471 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3473 * Makefile.in (maintainer-clean): New synonym for realclean.
3475 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3477 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3478 which use '0', '1', and '2' instead. Specify the proper size for
3479 a pmove immediate operand. Correct the pmovefd patterns to be
3480 moves to a register, not from a register.
3481 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3483 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3485 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3486 %psr, %wim, %tbr as F_NOTV9.
3488 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3490 * Makefile.in (Makefile): Just rebuild Makefile when running
3492 (config.h, stamp-h): New targets.
3493 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3494 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3495 rebuilding config.h.
3496 * configure: Rebuild.
3498 * mips-opc.c: Change unaligned loads and stores with "t,A"
3499 operands to use "t,A(b)".
3501 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3503 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3505 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3507 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3508 until 3 instead of until 2.
3510 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3512 * Makefile.in (ALL_CFLAGS): Define.
3513 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3514 (MOSTLYCLEAN): Add config.log.
3515 (distclean): Don't remove config.log.
3516 * configure.in: Substitute HDEFINES.
3517 * configure: Rebuild.
3519 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3521 * sh-opc.h (sh_arg_type): Add F_FR0.
3522 (sh_table, case fmac): Add F_FR0 as first argument.
3524 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3526 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3528 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3530 * sparc-dis.c: Remove all references to NO_V9.
3532 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3534 * aclocal.m4: Just include ../bfd/aclocal.m4.
3535 * configure: Rebuild.
3537 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3539 * sparc-dis.c (X_DISP19): Define.
3540 (print_insn, case 'G'): Use it.
3541 (print_insn, case 'L'): Sign extend displacement.
3543 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3545 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3546 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3547 host_makefile_frag or frags.
3548 * aclocal.m4: New file.
3549 * configure: Rebuild.
3550 * Makefile.in (INSTALL): Set to @INSTALL@.
3551 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3552 (INSTALL_DATA): Set to @INSTALL_DATA@.
3554 (AR_FLAGS): Set to rc rather than qc.
3555 (CC): Define as @CC@.
3556 (CFLAGS): Set to @CFLAGS@.
3557 (@host_makefile_frag@): Remove.
3558 (config.status): Remove dependency upon @frags@.
3560 * configure.in: ../bfd/config.bfd now just sets shell variables.
3561 Use them rather than looking through target Makefile fragments.
3562 * configure: Rebuild.
3564 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3566 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3568 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3570 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3571 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3574 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3575 (lookup_{name,value}): New functions.
3576 (prefetch_table): New static local.
3577 (sparc_{encode,decode}_prefetch): New functions.
3578 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3580 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3582 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3585 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3587 * sh-dis.c: Correct comment on first line of file.
3589 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3591 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3593 * sparc-opc.c (asi, membar): New static locals.
3594 (sparc_{encode,decode}_{asi,membar}): New functions.
3595 (sparc_opcodes, membar insn): Fix.
3596 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3597 Support decoding of membar masks.
3600 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3602 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3604 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3606 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3607 and likewise for the other branches. Add bhs as an alias for bcc,
3608 and likewise for the size variants. Add dbhs as an alias for
3611 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3613 * sh-opc.h (FP sts instructions): Update to match reality.
3615 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3617 * m68k-dis.c: (fpcr_names): Add % before all register names.
3618 (reg_names): Likewise.
3619 (print_insn_arg): Don't explicitly print % before register names.
3620 Add % before register names in static array names. In case 'r',
3621 print data registers as `@(Dn)', not `Dn@'. When printing a
3622 memory address, don't print @# before it.
3623 (print_indexed): Change base_disp and outer_disp from int to
3624 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3625 syntax. Sign extend 8 byte displacement correctly.
3626 (print_base): Print using MIT syntax. Print zpc when appropriate.
3627 Change parameter disp from int to bfd_vma.
3629 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3632 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3634 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3635 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3636 * sh-opc.h (sh_arg_type): Add new operand types.
3637 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3639 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3641 * Makefile.in (distclean): Remove generated file config.h.
3643 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3645 * Makefile.in (distclean): Remove generated file config.h.
3647 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3649 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3651 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3653 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3654 rather than numopcodes. Use m68k_opcodes rather than removed
3655 opcode function. Don't check F_ALIAS.
3656 (print_insn_arg): Change first parameter to be const char *.
3657 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3658 (m68k-opc.o): New target.
3659 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3660 * configure: Rebuild.
3662 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3664 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3665 (opcode_bits, opcode_hash_table): New variables.
3666 (opcodes_initialized): Renamed from opcodes_sorted.
3667 (build_hash_table): New function.
3668 (is_delayed_branch): Use hash table.
3669 (print_insn): Renamed from print_insn_sparc, made static.
3670 Build and use hash table. If !sparc64, ignore sparc64 insns,
3671 and vice-versa if sparc64.
3672 (print_insn_sparc, print_insn_sparc64): New functions.
3673 (compare_opcodes): Move sparc64 opcodes to end.
3674 Print commutative insns with constant second.
3675 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3677 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3679 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3680 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3681 avoids printing a delay slot in a delay slot.
3682 * sh-opc.h (sh_table): Fully bracket last entry.
3684 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3686 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3688 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3690 * configure.in: Get host_makefile_frag from ${srcdir}.
3692 * configure.in: Autoconfiscated. Check for string[s].h. Create
3693 config.h from config.in. Don't set up sysdep.h link.
3694 * sysdep.h: New file.
3695 * configure, config.in: New files, generated from configure.in.
3696 * Makefile.in: Updated to be processed autoconf-style.
3697 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3698 (Makefile): Depend on config.status.
3699 (config.status): New rule.
3700 * configure.bat: Update Makefile substitutions.
3702 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3704 * mips-opc.c (L1): Define.
3705 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3706 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3709 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3711 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3712 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3713 have multiple add units but only a single logical unit.
3715 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3716 shifted by 18, without any insertion or extraction function.
3717 (insert_cr, extract_cr): Remove.
3719 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3721 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3724 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3726 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3727 * sh-opc.h: Add copyright.
3729 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3731 * Makefile.in (crunch-m68k): Delete extra target accidentally
3732 checked in a while ago.
3734 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3736 * sh-opc.h (sh_table): Add SH3 support.
3738 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3740 * sh-opc.h: Added bsrf and braf.
3742 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3744 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3745 bogus [ls]fm{ea,fd} patterns.
3747 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3748 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3749 initialize it from memory. Make function static.
3750 (print_insn_{big,little}_arm): New functions.
3751 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3752 the correct endianness.
3754 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3756 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3759 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3761 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3762 17th, so that it builds again using GCC as the compiler.
3764 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3766 * mips-dis.c (print_insn_little_mips): Cast return value from
3767 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3768 expects an unsigned long, and that might be fewer words of
3769 argument storage (e.g., if bfd_vma is long long on a 32-bit
3771 (print_insn_big_mips): Likewise with bfd_getb32 value.
3772 (_print_insn_mips): Now static.
3774 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3776 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3777 gcc memory hog problem with initializer is fixed.
3779 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3781 Merge in support for Mac MPW as a host.
3782 (Old change descriptions retained for informational value.)
3784 * mpw-config.in (archname): Compute from the config.
3785 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3787 * mpw-config.in (target_arch): Compute from canonical target.
3788 (m68k, mips, powerpc, sparc): Add architectures.
3789 * mpw-make.in (disassemble.c.o): Add.
3790 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3792 * mpw-config.in (BFD_MACHINES): Set to a default value.
3793 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3795 * mpw-make.in (CSEARCH): Add extra-include to search path.
3797 * mpw-config.in (varargs.h): Don't create.
3798 (sysdep.h): Create using forward-include.
3799 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3801 * mpw-config.in: New file, MPW version of configure.in.
3802 * mpw-make.in: New file, MPW version of Makefile.in.
3804 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3806 * alpha-dis.c (print_insn_alpha): Put empty statement after
3809 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3811 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3812 (low_sign_extend): Likewise.
3813 (get_field): Delete unused function.
3814 (set_field, deposit_14, deposit_21): Likewise.
3816 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3818 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3821 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3823 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3825 * alpha-opc.h (OSF_ASMCODE): define
3826 print pal-code names as defined in App C of the
3827 Alpha Architecture Reference Manual
3829 * alpha-dis.c: cleaned up output
3830 print stylized code forms as defined in App A.4.3 of the
3831 Alpha Architecture Reference Manual
3833 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3835 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3837 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3840 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3842 * m68k-dis.c (opcode): New function. Returns address of opcode
3843 table entry given index, even if the opcode table was split to
3844 work around gcc bugs.
3845 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3847 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3848 (reg_names): Now const.
3849 (print_insn_arg): Arrays cacheFieldName and names now const.
3850 (print_indexed): Array scales now const.
3852 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3854 * ppc-opc.c: Sort recently added instructions by minor opcode
3855 number within major opcode number.
3857 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3859 * hppa-dis.c: Include libhppa.h.
3861 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3863 * mips-opc.c: Change dli to use M_DLI, and add dla.
3865 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3867 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3869 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3871 * mips-opc.c: Add r4650 mul instruction.
3873 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3875 * mips-opc.c: Add uld and usd macros for unaligned double load and
3878 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3880 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3881 mfdcr, mtdcr, icbt, iccci.
3883 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3885 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3886 signed char fields to shorts, more portable.
3888 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3890 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3891 char fields as signed chars, since they may have negative values.
3893 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3895 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3896 (mycroft@netbsd.org).
3898 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3900 From "Logg, Ed" <elogg@ea.com>:
3901 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3902 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3905 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3907 * ppc-opc.c: Changes based on patch from David Edelsohn
3908 <edelsohn@mhpcc.edu>.
3909 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3912 (insert_tbr): New static function.
3913 (extract_tbr): New static function.
3914 (XFXFXM_MASK, XFXM): Define.
3915 (XSPRBAT_MASK, XSPRG_MASK): Define.
3916 (powerpc_opcodes): Add instructions to access special registers by
3917 name. Add mtcr and mftbu.
3919 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3921 * mips-opc.c (P3): Define.
3922 (mips_opcodes): Add mad and madu.
3924 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3926 * configure.in: Add W65 support.
3927 * disassemble.c: Likewise.
3928 * w65-opc.h, w65-dis.c: New files.
3930 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3932 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3935 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3937 * mips-opc.c: Add dli as a synonym for li.
3939 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3941 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3942 print something for reserved opcode values, even if it won't
3945 * mips-dis.c (_print_insn_mips): When initializing, shift right
3946 and mask, to avoid sign extension problems on the Alpha.
3948 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3951 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3953 * sh-opc.h (mov.l gbr): Get direction right.
3954 * sh-dis.c (print_insn_shx): New function.
3955 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3956 print opcodes with right byte order.
3958 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3960 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3961 to avoid conflicts with getopt.
3963 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3965 * hppa-dis.c (print_insn_hppa): Read the instruction using
3966 bfd_getb32, so that it works on a little endian or 64 bit host.
3967 Remove unused local variable op.
3969 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3971 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3972 addu does not work correctly if -mips3.
3974 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3976 * a29k-dis.c (print_special): Add special register names defined
3977 on 29030, 29040 and 29050.
3978 (print_insn): Handle new operand type 'I'.
3980 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3982 * Makefile.in (INSTALL): Use top level install.sh script.
3984 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3986 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3987 that it works on a little endian host.
3989 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3991 * configure.in: Use ${config_shell} when running config.bfd.
3993 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3995 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3997 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3999 * a29k-dis.c (print_insn): Print the opcode.
4001 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4003 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4005 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4007 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4009 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4011 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4012 which store a value into memory.
4014 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4016 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4017 * arm-dis.c, arm-opc.h: New files.
4019 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4021 * Makefile.in (ns32k-dis.o): Add dependency.
4022 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4023 string, not as array of chars.
4025 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4027 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4029 * sparc-opc.c: Added sparclite extended FP operations, and
4030 versions of v9 impdep* instructions permitting specification of
4033 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4035 * i960-dis.c (reg_names): Now const.
4036 (struct sparse_tabent): New type, copied from array type in mem
4038 (ctrl): Local static array ctrl_tab now const.
4039 (cobr): Local static array cobr_tab now const.
4040 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4041 static variable mem_tab no longer explicitly initialized. Changed
4042 mem_init to const array of struct sparse_tabent.
4043 (reg): Local static variable reg_tab no longer explicitly
4044 initialized. Changed reg_init to const array of struct
4046 (ea): Local static array scale_tab now const.
4048 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4051 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4053 * configure.bat: the disassember needs to be enabled for
4054 "objdump -d" to work in djgpp.
4056 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4058 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4059 (invalid_float): Enabled general version, doesn't require running
4060 on ns32k host. Changed to take char* argument, and test for
4061 explicitly specified sizes, instead of using sizeof() on host CPU
4063 (INVALID_FLOAT): Cast first argument.
4064 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4065 list_P032, list_M032): Now const.
4066 (optlist, list_search): Made appropriate arguments now point to
4068 (print_insn_arg): Changed static array of one-character-string
4069 pointers into a static const array of characters; fixed sprintf
4070 statement accordingly.
4072 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4074 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4075 from distribution. A ns32k-dis.c from a previous distribution has
4076 been brought up to date and supports the new interface.
4078 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4080 * configure.in: add bfd_ns32k_arch target support.
4082 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4083 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4085 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4087 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4090 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4092 * h8300-dis.c, mips-dis.c: Don't use true and false.
4094 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4096 * configure.in: Change --with-targets to --enable-targets.
4098 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4100 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4101 opcodes to the first instruction with that opcode, to speed
4102 disassembly of large files. From ralphc@pyramid.com (Ralph
4105 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4107 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4109 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4111 * configure.bat: update to latest makefile.in
4113 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4115 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4116 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4117 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4118 slot insn is in a delay slot.
4119 * z8k-opc.h: (resflg): Fix patterns.
4120 * h8500-opc.h Fix CR insn patterns.
4122 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4124 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4125 "cmpl" before POWER versions, so that gas -many uses them.
4127 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4129 * disassemble.c: New file.
4130 * Makefile.in (OFILES): Add disassemble.o.
4131 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4132 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4133 binutils/configure.in.
4135 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4136 opcode being examined.
4138 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4140 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4141 (insert_ral, insert_ram, insert_ras): New functions.
4142 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4143 RAS for store with update.
4145 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4147 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4148 (edelsohn@npac.syr.edu).
4150 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4152 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4155 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4157 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4159 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4161 * ppc-opc.c (powerpc_operands): The signedp field has been
4162 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4163 instead. Add new operand SISIGNOPT.
4164 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4165 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4166 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4169 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4171 * i386-dis.c (struct private): Renamed to dis_private. `private'
4172 is a reserved word for dynix cc.
4174 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4176 * configure.in: Change error message to refer to bfd/config.bfd
4177 rather than bfd/configure.in.
4179 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4181 * ppc-opc.c: Define POWER2 as short alias flag.
4182 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4185 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4187 * i960-dis.c (print_insn_i960): Don't read a second word for
4188 opcodes 0, 1, 2 and 3.
4190 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4192 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4194 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4196 * m68881-ext.c: Removed; no longer used.
4197 * Makefile.in: Changed accordingly.
4199 * m68k-dis.c (ext_format_68881): Don't declare.
4200 (print_insn_m68k): If an instruction uses place 'i', it uses at
4201 least four fixed bytes.
4202 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4203 extended float, convert to double using floatformat_to_double, not
4204 ieee_extended_to_double, and fetch the data before converting it.
4206 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4208 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4209 davidj@ICSI.Berkeley.EDU (David Johnson).
4211 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4213 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4214 PowerPC uses bdnz[l][a].
4216 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4218 * dis-buf.c, i386-dis.c: Include sysdep.h.
4220 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4222 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4224 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4225 by Motorola PowerPC 601 with PPC_OPCODE_601.
4226 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4227 Disassemble Motorola PowerPC 601 instructions as well as normal
4228 PowerPC instructions.
4230 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4232 * i960-dis.c (reg, mem): Just use a static array instead of
4235 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4237 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4238 condition name index if this is for a negated condition.
4240 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4241 Floating point format for 'H' operand is backwards from normal
4242 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4243 operands (fmpyadd and fmpysub), handle bizarre register
4244 translation correctly for single precision format.
4246 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4247 or 'I' operands if the next format specifier is 'M' (fcmp
4248 condition completer).
4250 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4252 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4253 single number giving a bitmask for the MB and ME fields of an M
4254 form instruction. Change NB to accept 32, and turn it into 0;
4255 also turn 0 into 32 when disassembling. Seperated SH from NB.
4256 (insert_mbe, extract_mbe): New functions.
4257 (insert_nb, extract_nb): New functions.
4258 (SC_MASK): Mask out SA and LK bits.
4259 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4260 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4261 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4262 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4263 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4264 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4265 (powerpc_macros): Define table of macro definitions.
4266 (powerpc_num_macros): Define.
4268 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4269 if PPC_OPERAND_NEXT is set.
4271 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4273 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4274 char. Retrieve contents using bfd_getl32 instead of shifting.
4276 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4278 * ppc-opc.c: New file. Opcode table for PowerPC, including
4279 opcodes for POWER (RS/6000).
4280 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4281 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4282 (CFILES): Add ppc-dis.c.
4283 (ppc-dis.o, ppc-opc.o): New targets.
4284 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4286 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4288 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4289 No space before 'u', 'f', or 'N'.
4291 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4293 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4294 farther than we should.
4296 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4298 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4300 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4302 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4304 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4305 needs it, to prevent reading past the end of a section.
4307 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4309 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4310 Removed t,A case for la; always use t,A(b) case.
4312 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4314 From Ted Lemen <mellon@pepper.ncd.com>
4315 * mips-dis.c (print_insn_arg): Handle 'k'.
4316 * mips-opc.c: Make cache use k, not t.
4318 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4320 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4321 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4322 FLOAT_FORMAT_CODE to put out floating point register names.
4324 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4326 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4328 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4330 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4332 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4334 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4335 larger than 32. Moved dsxx32 variants first for disassembler.
4337 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4339 * z8kgen.c, z8k-opc.h: Add full lda information.
4341 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4343 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4344 movb instructions. Any necessary space will be emitted by
4345 the code to handle nullification completers.
4347 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4349 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4351 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4353 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4354 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4356 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4358 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4360 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4362 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4363 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4365 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4367 * m88k-dis.c (m88kdis): comment change. Remove space after
4369 (printop): handle new arg types DEC and XREG for m88110.
4371 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4373 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4374 type for absolute branch addresses. Delete special
4375 "ble" and "be" code in 'W' operand code.
4377 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4379 * mips-opc.c: Set hazard information correctly for branch
4380 likely instructions.
4382 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4384 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4385 info->fprintf_func for printing and info->print_address_func for
4388 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4390 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4392 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4395 Corrected second case of "b" for disassembler.
4397 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4399 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4400 to BFD swapping routines to correspond to BFD name changes.
4402 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4404 * mips-opc.c: Change div machine instruction to be z,s,t rather
4405 than s,t. Change div macro to be d,v,t rather than d,s,t.
4406 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4407 rem and remu which generates only the corresponding div
4408 instruction. This is for compatibility with the MIPS assembler,
4409 which only generates the simple machine instruction when an
4410 explicit destination of $0 is used.
4411 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4413 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4415 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4416 WR_31 hazard for bal, bgezal, bltzal.
4418 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4420 * hppa-dis.c (print_insn_hppa): Use print function
4421 from within the disassemble_info, not fprintf_filtered.
4423 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4425 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4426 Law, law@cs.utah.edu.)
4428 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4430 * mips-opc.c ("absu"): Removed.
4433 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4435 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4436 Changed hazard information to distinguish between memory load
4437 delays and coprocessor load delays.
4439 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4441 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4443 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4445 * configure.in: Don't pass cpu to config.bfd.
4447 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4449 * m88k-dis.c (m88kdis): Make class unsigned.
4451 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4453 * alpha-dis.c (print_insn_alpha): One branch format case was
4454 missing the instruction name.
4456 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4458 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4459 Add the arch-specific auxiliary files.
4460 (OFILES): Remove the arch-specific auxiliary files
4461 and use BFD_MACHINES instead of DIS_LIBS.
4462 * configure.in: Set BFD_MACHINES based on --with-targets option.
4464 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4466 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4469 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4471 * sparc-opc.c: Change CONST to const to deal with gcc
4472 -Dconst=__const -traditional.
4474 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4476 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4477 coprocessor instructions out of #if 0, and made them use new
4480 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4482 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4484 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4486 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4487 instruction, for use by the disassembler.
4489 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4490 hand-coded sign extensions that depended on 32-bit host ints.
4491 FIXME, we still depend on big-endian host bitfield ordering.
4492 (sparc_print_insn): Set the insn_info_valid field, and the
4493 other fields that describe the instruction being printed.
4495 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4497 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4498 `jmp' instead of just one of them.
4500 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4502 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4503 (fput_fp_reg_r): Renamed from fput_reg_r.
4504 (fput_fp_reg): New function.
4505 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4507 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4509 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4511 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4513 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4515 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4516 don't output a space.
4518 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4520 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4522 * mips-opc.c: New file, containing opcode table from
4523 ../include/opcode/mips.h.
4524 * Makefile.in: Add it.
4526 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4528 * m88k-dis.c: New file, moved in from gdb and changed to use the
4529 new dis-asm.h disassembler interface.
4530 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4531 (m88k-dis.o): New target.
4533 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4535 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4536 argument string const char * to correspond to opcode/mips.h.
4538 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4540 * mips-dis.c: Updated to account for name changes in new version
4542 * Makefile.in: Added header file dependencies.
4544 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4546 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4548 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4550 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4551 extend, rather than shifts.
4553 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4555 * Makefile.in: Undo 15 June change.
4557 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4559 * m68k-dis.c (print_insn_arg): Change return value to byte count
4561 * m68k-dis.c: Re-write to detect invalid operands before
4562 printing anything, so we can handle this the same way we
4563 handle invalid opcodes.
4565 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4567 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4569 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4571 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4574 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4576 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4578 * configure.in: Do make sysdep.h link.
4579 * Makefile.in: Search ../include. Don't search ../bfd.
4581 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4583 Changes from Jeff Law, law@cs.utah.edu:
4584 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4585 Do not print a space before the completers specified by
4588 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4590 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4591 defined, since gdb has been fixed.
4593 Changes from Jeff Law, law@cs.utah.edu:
4594 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4595 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4596 be a *disassemble_info, not a *FILE.
4597 * hppa-dis.c: Support 'd', '!', and 'a'.
4598 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4599 * hppa-dis.c: Delete cases which are no longer needed.
4601 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4603 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4605 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4607 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4610 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4612 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4613 * configure.in: No longer need to configure to get sysdep.h.
4615 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4617 * Patches from Jeffrey Law <law@cs.utah.edu>.
4618 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4619 templates for 1.1 FP computational instructions.
4621 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4623 * h8500-dis.c (print_insn_h8500): Address argument is type
4625 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4628 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4629 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4631 * sparc-dis.c (compare_opcodes): Move static declaration to
4634 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4636 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4637 instruction, remove unimp hack from 'l' argument.
4639 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4641 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4644 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4646 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4647 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4650 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4652 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4653 arrays of string pointers to 2-d arrays of chars, to save
4656 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4658 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4659 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4661 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4663 * hppa-dis.c: New file from Utah, adapted to new disassembler
4665 * Makefile.in: Include it.
4667 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4669 * sh-dis.c, sh-opc.h: New files.
4671 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4673 * alpha-dis.c, alpha-opc.h: New files.
4675 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4677 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4680 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4682 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4684 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4686 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4689 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4691 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4692 and double percent signs a few places.
4694 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4696 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4697 Use info->print_address_func not print_address.
4699 * dis-buf.c (generic_print_address): New function.
4701 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4703 * Makefile.in: Add sparc-dis.c.
4704 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4706 Add `add' instruction to the set that get checked
4707 for a preceding `sethi' in order to print an absolute address.
4708 * (print_insn): Disassembly prefers real instructions.
4709 (is_delayed_branch): Speed up.
4710 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4711 Still missing some float ops, and needs testing.
4712 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4713 F_ALIAS. Use printf, not fprintf, when not passing a file
4715 (compare_opcodes): Check that identical instructions have
4716 identical opcodes, complain otherwise.
4719 * Include reg_names.
4721 Use dis-asm.h/read_memory_func interface.
4723 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4725 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4726 deliberately return non-zero to setjmp from longjmp. Otherwise
4727 this code fails to compile.
4729 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4731 * m68k-dis.c: Fix prototype for fetch_arg().
4733 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4735 * dis-buf.c: New file, for new read_memory_func interface.
4736 Makefile.in (OFILES): Include it.
4737 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4738 Use new read_memory_func interface.
4740 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4742 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4743 * h8500-opc.h: Fix couple of opcodes.
4745 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4747 * Makefile.in: add dvi & installcheck targets
4749 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4751 * Makefile.in: Update for h8500-dis.c.
4753 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4755 * h8500-dis.c, h8500-opc.h: New files
4757 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4759 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4760 ../include/dis-asm.h.
4761 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4762 and ../gdb/m68k-pinsn.c).
4763 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4764 and ../gdb/i386-pinsn.c).
4765 * m68881-ext.c: New file. Moved definition of
4766 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4767 * Makefile.in: Adjust for new files.
4768 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4769 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4770 can be dis-assembled.
4772 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4774 * mips-dis.c (print_insn_arg): Now returns void.
4776 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4778 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4779 files that use the macros.
4781 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4784 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4785 (CFILES): Added mips-dis.c.
4787 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4789 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4790 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4792 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4794 * Makefile.in: Improve *clean rules.
4795 * configure.in: Allow a default host.
4797 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4799 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4800 files include other sysdep files
4802 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4804 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4806 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4808 * configure.in: For host support, use ../bfd/configure.host
4809 so it stays in sync with the ../bfd/hosts database.
4811 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4813 * configure.in: use cpu-vendor-os triple instead of nested cases
4815 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4817 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4818 *always* the wrong one.
4820 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4822 * z8kgen.c: added copyright info
4824 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4826 * z8k-dis.c (unparse_instr): prettier tabs
4827 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4829 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4831 * configure.in: Add ncr* configuration.
4832 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4833 picayune ANSI compilers happy.
4835 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4837 * configure.in (i386): Make i386 and i486 synonymous for now.
4838 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4840 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4842 * Makefile.in (install): Fix typo.
4844 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4846 * Makefile.in (make): Remove obsolete crud.
4847 (sparc-opc.o): Avoid Sun Make VPATH bug.
4849 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4851 * Makefile.in: since there are no SUBDIRS, remove rule and
4852 references of subdir_do.
4854 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4856 * Makefile.in (install): Get the library name right here too.
4857 Don't install bfd.h, since it's unrelated to this library. No
4858 subdirs to recurse into, either.
4859 (CFILES): The source file has a .c suffix, not .o.
4861 * sparc-opc.c: New file, moved from BFD.
4862 * Makefile.in (OFILES): Build it.
4864 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4866 * z8k-dis.c: fixed forward refferences of some declarations.
4868 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4870 * Makefile.in: get the name of the library right
4872 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4874 * z8k-dis.c: knows how to disassemble z8k stuff
4875 * z8k-opc.h: new file full of z8000 opcodes
4879 version-control: never
projects / platform / upstream / binutils.git / blob