1 2012-05-16 Meador Inge <meadori@codesourcery.com>
3 * arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
6 2012-05-15 James Murray <jsm@jsm-net.demon.co.uk>
7 Stephane Carrez <stcarrez@nerim.fr>
9 * configure.in: Add S12X and XGATE co-processor support to m68hc11
11 * disassemble.c: Likewise.
12 * configure: Regenerate.
13 * m68hc11-dis.c: Make objdump output more consistent, use hex
14 instead of decimal and use 0x prefix for hex.
15 * m68hc11-opc.c: Add S12X and XGATE opcodes.
17 2012-05-14 James Lemke <jwlemke@codesourcery.com>
19 * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
20 (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
21 (vle_opcd_indices): New array.
22 (lookup_vle): New function.
23 (disassemble_init_powerpc): Revise for second (VLE) opcode table.
24 (print_insn_powerpc): Likewise.
25 * ppc-opc.c: Likewise.
27 2012-05-14 Catherine Moore <clm@codesourcery.com>
28 Maciej W. Rozycki <macro@codesourcery.com>
29 Rhonda Wittels <rhonda@codesourcery.com>
30 Nathan Froyd <froydnj@codesourcery.com>
32 * ppc-opc.c (insert_arx, extract_arx): New functions.
33 (insert_ary, extract_ary): New functions.
34 (insert_li20, extract_li20): New functions.
35 (insert_rx, extract_rx): New functions.
36 (insert_ry, extract_ry): New functions.
37 (insert_sci8, extract_sci8): New functions.
38 (insert_sci8n, extract_sci8n): New functions.
39 (insert_sd4h, extract_sd4h): New functions.
40 (insert_sd4w, extract_sd4w): New functions.
41 (insert_vlesi, extract_vlesi): New functions.
42 (insert_vlensi, extract_vlensi): New functions.
43 (insert_vleui, extract_vleui): New functions.
44 (insert_vleil, extract_vleil): New functions.
45 (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
46 (BI16, BI32, BO32, B8): New.
47 (B15, B24, CRD32, CRS): New.
48 (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
49 (DB, IMM20, RD, Rx, ARX, RY, RZ): New.
50 (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
51 (SH6_MASK): Use PPC_OPSHIFT_INV.
52 (SI8, UI5, OIMM5, UI7, BO16): New.
53 (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
54 (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
56 (insert_sprg, extract_sprg): Check ALLOW8_SPRG.
57 (OPVUP, OPVUP_MASK OPVUP): New
58 (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
59 (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
60 (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
61 (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
62 (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
63 (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
64 (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
65 (SE_IM5, SE_IM5_MASK): New.
66 (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
67 (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
68 (BO32DNZ, BO32DZ): New.
69 (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
71 (powerpc_opcodes): Add new VLE instructions. Update existing
72 instruction to include PPCVLE if supported.
73 * ppc-dis.c (ppc_opts): Add vle entry.
74 (get_powerpc_dialect): New function.
75 (powerpc_init_dialect): VLE support.
76 (print_insn_big_powerpc): Call get_powerpc_dialect.
77 (print_insn_little_powerpc): Likewise.
78 (operand_value_powerpc): Handle negative shift counts.
79 (print_insn_powerpc): Handle 2-byte instruction lengths.
81 2012-05-11 Daniel Richard G. <skunk@iskunk.org>
84 * configure.in: Invoke ACX_HEADER_STRING.
85 * configure: Regenerate.
86 * config.in: Regenerate.
87 * sysdep.h: If STRINGS_WITH_STRING is defined then include both
88 string.h and strings.h.
90 2012-05-11 Nick Clifton <nickc@redhat.com>
93 * arm-dis.c (print_insn): Fix detection of instruction mode in
94 files containing multiple executable sections.
96 2012-05-03 Sean Keys <skeys@ipdatasys.com>
98 * Makefile.in, configure: regenerate
99 * disassemble.c (disassembler): Recognize ARCH_XGATE.
100 * xgate-dis.c (read_memory, print_insn, print_insn_xgate):
102 * configure.in: Recognize xgate.
103 * xgate-dis.c, xgate-opc.c: New files for support of xgate
104 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
105 and opcode generation for xgate.
107 2012-04-30 DJ Delorie <dj@redhat.com>
109 * rx-decode.opc (MOV): Do not sign-extend immediates which are
110 already the maximum bit size.
111 * rx-decode.c: Regenerate.
113 2012-04-27 David S. Miller <davem@davemloft.net>
115 * sparc-dis.c (v9a_asr_reg_names): Add 'cfr'.
116 * sparc-opc.c (sparc_opcodes): Add rd/wr cases for %cfr.
118 * sparc-opc.c (sparc_opcodes): Add 'wr X, %pause' and 'pause'.
119 * sparc-dis.c (v9a_asr_reg_names): Add 'pause'.
121 * sparc-opc.c (CBCOND): New define.
122 (CBCOND_XCC): Likewise.
123 (cbcond): New helper macro.
124 (sparc_opcodes): Add compare-and-branch instructions.
126 * sparc-dis.c (print_insn_sparc): Handle ')'.
127 * sparc-opc.c (sparc_opcodes): Add crypto instructions.
129 * sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
130 into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
132 2012-04-12 David S. Miller <davem@davemloft.net>
134 * sparc-dis.c (X_DISP10): Define.
135 (print_insn_sparc): Handle '='.
137 2012-04-01 Mike Frysinger <vapier@gentoo.org>
139 * bfin-dis.c (fmtconst): Replace decimal handling with a single
140 sprintf call and the '*' field width.
142 2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
144 * mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
146 2012-03-16 Alan Modra <amodra@gmail.com>
148 * ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
149 (powerpc_opcd_indices): Bump array size.
150 (disassemble_init_powerpc): Set powerpc_opcd_indices entries
151 corresponding to unused opcodes to following entry.
152 (lookup_powerpc): New function, extracted and optimised from..
153 (print_insn_powerpc): ..here.
155 2012-03-15 Alan Modra <amodra@gmail.com>
156 James Lemke <jwlemke@codesourcery.com>
158 * disassemble.c (disassemble_init_for_target): Handle ppc init.
159 * ppc-dis.c (private): New var.
160 (powerpc_init_dialect): Don't return calloc failure, instead use
162 (PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
163 (powerpc_opcd_indices): New array.
164 (disassemble_init_powerpc): New function.
165 (print_insn_big_powerpc): Don't init dialect here.
166 (print_insn_little_powerpc): Likewise.
167 (print_insn_powerpc): Start search using powerpc_opcd_indices.
169 2012-03-10 Edmar Wienskoski <edmar@freescale.com>
171 * ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
172 * ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
173 (PPCVEC2, PPCTMR, E6500): New short names.
174 (powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
175 mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
176 lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
177 lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
178 lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
179 optional operands on sync instruction for E6500 target.
181 2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
183 * s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
185 2012-02-27 Alan Modra <amodra@gmail.com>
187 * mt-dis.c: Regenerate.
189 2012-02-27 Alan Modra <amodra@gmail.com>
191 * v850-opc.c (extract_v8): Rearrange to make it obvious this
192 is the inverse of corresponding insert function.
193 (extract_d22, extract_u9, extract_r4): Likewise.
194 (extract_d9): Correct sign extension.
195 (extract_d16_15): Don't assume "long" is 32 bits, and don't
196 rely on implementation defined behaviour for shift right of
198 (extract_d16_16, extract_d17_16, extract_i9): Likewise.
199 (extract_d23): Likewise, and correct mask.
201 2012-02-27 Alan Modra <amodra@gmail.com>
203 * crx-dis.c (print_arg): Mask constant to 32 bits.
204 * crx-opc.c (cst4_map): Use int array.
206 2012-02-27 Alan Modra <amodra@gmail.com>
208 * arc-dis.c (BITS): Don't use shifts to mask off bits.
209 (FIELDD): Sign extend with xor,sub.
211 2012-02-25 Walter Lee <walt@tilera.com>
213 * tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
214 * tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
215 TILEPRO_OPC_LW_TLS_SN.
217 2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
219 * i386-opc.h (HLEPrefixNone): New.
220 (HLEPrefixLock): Likewise.
221 (HLEPrefixAny): Likewise.
222 (HLEPrefixRelease): Likewise.
224 2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
226 * i386-dis.c (HLE_Fixup1): New.
227 (HLE_Fixup2): Likewise.
228 (HLE_Fixup3): Likewise.
235 (MOD_C6_REG_7): Likewise.
236 (MOD_C7_REG_7): Likewise.
237 (RM_C6_REG_7): Likewise.
238 (RM_C7_REG_7): Likewise.
239 (XACQUIRE_PREFIX): Likewise.
240 (XRELEASE_PREFIX): Likewise.
241 (dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
242 cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
243 Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
244 (reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
245 not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
246 MOD_C6_REG_7 and MOD_C7_REG_7.
247 (mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
248 (rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
250 (prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
251 (CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
253 * i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
255 (cpu_flags): Add CpuHLE and CpuRTM.
256 (opcode_modifiers): Add HLEPrefixOk.
258 * i386-opc.h (CpuHLE): New.
260 (HLEPrefixOk): Likewise.
261 (i386_cpu_flags): Add cpuhle and cpurtm.
262 (i386_opcode_modifier): Add hleprefixok.
264 * i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
265 add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
266 sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
267 operand. Add xacquire, xrelease, xabort, xbegin, xend and
269 * i386-init.h: Regenerated.
270 * i386-tbl.h: Likewise.
272 2012-01-24 DJ Delorie <dj@redhat.com>
274 * rl78-decode.opc (rl78_decode_opcode): Add NOT1.
275 * rl78-decode.c: Regenerate.
277 2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
280 * cr16-dis.c (print_arg): Test symtab_size not num_symbols.
282 2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
284 * m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
285 register and move them after pmove with PSR/PCSR register.
287 2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
289 * i386-dis.c (mod_table): Add vmfunc.
291 * i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
292 (cpu_flags): CpuVMFUNC.
294 * i386-opc.h (CpuVMFUNC): New.
295 (i386_cpu_flags): Add cpuvmfunc.
297 * i386-opc.tbl: Add vmfunc.
298 * i386-init.h: Regenerated.
299 * i386-tbl.h: Likewise.
301 For older changes see ChangeLog-2011
307 version-control: never