1 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * i386-dis.c: Mention intel mode specials in macro char comment.
5 1999-06-21 Ian Lance Taylor <ian@zembu.com>
7 * alpha-dis.c: Don't include <stdlib.h>.
8 * arm-dis.c: Include "sysdep.h".
9 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
11 * Makefile.am: Rebuild dependencies.
12 * Makefile.in: Rebuild.
14 1999-06-16 Nick Clifton <nickc@cygnus.com>
16 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
19 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
21 * arm-dis.c (arm_regnames): Turn into a pointer to a register
23 (arm_regnames_standard): New variable: Array of ARM register
24 names according to ARM instruction set nomenclature.
25 (arm_regnames_apcs): New variable: Array of ARM register names
26 according to ARM Procedure Call Standard.
27 (arm_regnames_raw): New variable: Array of ARM register names
28 using just 'r' and the register number.
29 (arm_toggle_regnames): New function: Toggle the chosen register set
31 (parse_disassembler_options): New function: Parse any target
32 disassembler command line options.
33 (print_insn_big_arm): Call parse_disassembler_options if any
35 (print_insn_little_arm): Call parse_disassembler_options if any
38 1999-06-13 Ian Lance Taylor <ian@zembu.com>
40 * i386-dis.c (FWAIT_OPCODE): Define.
41 (used_prefixes): New static variable.
42 (fetch_data): Don't print an error message if we have already
43 fetched some bytes successfully.
44 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
45 (prefix_name): New static function.
46 (print_insn_i386): If setjmp fails, indicating a data error, but
47 we have managed to fetch some bytes, print the first one as a
48 prefix or a .byte pseudo-op. If fwait is followed by a non
49 floating point instruction, print the first prefix. Set
50 used_prefixes when prefixes are used. If any prefixes were not
51 used after disassembling the instruction, print the first prefix
52 instead of printing the instruction.
53 (putop): Set used_prefixes when prefixes are used.
54 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
55 (OP_DIR, OP_SIMD_Suffix): Likewise.
57 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
59 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
60 Support signx %reg, clruw %reg.
62 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
64 * sparc-opc.c: Add aliases Solaris as supports.
66 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
68 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
69 * Makefile.in: Regenerated.
71 1999-06-03 Philip Blundell <philb@gnu.org>
73 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
74 when target is PC-relative.
76 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
78 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
81 * m68k-dis.c (fetch_arg): Add places `n', `o'.
83 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
84 Add mcf5206e to appropriate instructions.
85 Add alias for MAC, MSAC.
87 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
90 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
91 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
93 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
95 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
97 * i386-dis.c (Ed): Define.
98 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
100 (OP_rm): Rename to OP_Rd.
103 (putop): Add const to template and p.
104 (print_insn_x86): Delete.
105 (print_insn_i386): Merge old function print_insn_x86. Add const
107 (struct dis386): Add const to name.
108 (dis386_att, dis386_intel): Add const.
109 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
110 (names32, names16, names8, names_seg, index16): Add const.
111 (grps, prefix_user_table, float_reg): Add const.
112 (float_mem_att, float_mem_intel): Add const.
113 (oappend): Add const to s.
114 (OP_REG): Add const to s.
115 (ptr_reg): Add const to s.
116 (dofloat): Add const to dp.
117 (OP_C): Don't skip modrm, it's now done in OP_Rd.
120 (OP_Rd): Check for valid mod. Call Op_E to print.
121 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
122 (OP_MS): Check for valid mod. Call Op_EM to print.
123 (OP_3DNowSuffix): Set obufp and use oappend rather than
124 strcat. Call BadOp() for errors.
125 (OP_SIMD_Suffix): Likewise.
126 (BadOp): New function.
128 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
130 * i386-dis.c (dis386_intel): Remove macro chars, except for
131 jEcxz. Change cWtR and cRtd to cW and cR.
132 (dis386_twobyte_intel): Remove macro chars here too.
133 (putop): Handle R and W macros for intel mode.
135 * i386-dis.c (SIMD_Fixup): New function.
136 (dis386_twobyte_att): Use it on movlps and movhps, and change
137 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
138 (dis386_twobyte_intel): Same here.
140 * i386-dis.c (Av): Remove.
144 (OP_SIMD_Suffix): New function.
145 (OP_DIR): Remove dead code.
146 (eAX_reg..eDI_reg): Renumber.
147 (onebyte_has_modrm): Table numbering comments.
148 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
149 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
150 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
151 and handle SIMD cmp insns in OP_SIMD_Suffix.
152 (info->bytes_per_line): Bump from 5 to 6.
154 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
155 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
157 PIII SIMD support from Doug Ledford <dledford@redhat.com>
158 * i386-dis.c (XM, EX, None): Define.
159 (OP_XMM, OP_EX, OP_None): New functions.
160 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
161 (GRP14): Rename to GRPAMD.
162 (GRP*): Add USE_GROUPS flag.
164 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
165 (twobyte_has_modrm): Add SIMD entries.
166 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
167 (grps): Add SIMD insns.
168 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
169 oappend repz if uses_f3_prefix. Add code to handle new groups for
172 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
173 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
174 operand from Av to Jv.
176 1999-05-07 Nick Clifton <nickc@cygnus.com>
178 * mcore-dis.c (print_insn_mcore): Use .short to display
179 unidentified instructions, not .word.
181 1999-04-26 Tom Tromey <tromey@cygnus.com>
183 * aclocal.m4, configure: Updated for new version of libtool.
185 1999-04-14 Doug Evans <devans@casey.cygnus.com>
187 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
188 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
190 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
192 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
195 1999-04-10 Doug Evans <devans@casey.cygnus.com>
197 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
198 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
200 1999-04-06 Ian Lance Taylor <ian@zembu.com>
202 * opintl.h (LC_MESSAGES): Never define.
204 1999-04-04 Ian Lance Taylor <ian@zembu.com>
206 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
207 (separator_char, scale_char): Likewise.
208 (print_insn_x86): Likewise.
209 (print_insn_i386): Likewise. Add declaration.
211 1999-03-26 Doug Evans <devans@casey.cygnus.com>
213 * fr30-dis.c: Rebuild.
214 * m32r-dis.c: Rebuild.
216 1999-03-23 Ian Lance Taylor <ian@zembu.com>
218 * m68k-opc.c: Change compare instructions to use "@s" rather than
219 ";s" when used with an immediate operand.
221 1999-03-22 Doug Evans <devans@casey.cygnus.com>
223 * cgen-opc.c (cgen_set_cpu): Delete.
224 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
225 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
227 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
229 * po/opcodes.pot: Rebuild.
231 1999-03-16 Martin Hunt <hunt@cygnus.com>
233 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
235 1999-03-11 Doug Evans <devans@casey.cygnus.com>
237 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
238 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
239 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
240 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
241 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
242 * m32r-opinst.c: Rebuild.
244 1999-02-25 Doug Evans <devans@casey.cygnus.com>
246 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
247 (cgen_hw_lookup_by_num): Rewrite.
248 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
249 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
250 * m32r-opinst.c: Rebuild.
252 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
254 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
255 (insert_jhint): Fix insertion mask.
256 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
258 1999-02-10 Doug Evans <devans@casey.cygnus.com>
260 * Makefile.in: Rebuild.
262 1999-02-09 Doug Evans <devans@casey.cygnus.com>
264 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
265 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
266 * Makefile.am: Remove references to them.
267 (HFILES): Add fr30-desc.h,m32r-desc.h.
268 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
270 (ALL_MACHINES): Update.
271 * configure.in: Redo handling of cgen_files.
272 (bfd_i960_arch): Delete i960c-*.lo files.
273 * configure: Regenerate.
274 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
275 (hash_insn_array): Rewrite.
276 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
277 (hash_insn_array): Rewrite.
278 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
279 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
280 (cgen_lookup_get_insn_operands): Ditto.
281 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
282 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
283 * po/POTFILES.in: Rebuild.
284 * po/opcodes.pot: Rebuild.
286 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
288 * Makefile.am: Rebuild dependencies.
289 (HFILES): Add fr30-opc.h.
290 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
291 * Makefile.in: Rebuild.
293 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
294 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
296 * acconfig.h: Remove.
297 * configure: Rebuild with current autoconf/automake.
298 * aclocal.m4: Likewise.
299 * config.in: Likewise.
300 * Makefile.in: Likewise.
302 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
304 * m68k-opc.c: Correct move (not movew) to status word on 5200.
306 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
308 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
309 * i386-dis.c (x_mode): Define.
313 (dis386_twobyte): Remove.
314 (dis386_twobyte_att): New.
315 (dis386_twobyte_intel): New.
316 (print_insn_x86): Use new arrays.
318 (float_mem_intel): New.
319 (float_mem_att): New.
320 (dofloat): Use new float_mem arrays.
321 (print_insn_i386_att): New.
322 (print_insn_i386_intel): New.
323 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
324 (putop): Handle intel syntax.
325 (OP_indirE): Handle intel syntax.
326 (OP_E): Handle intel syntax.
327 (OP_I): Handle intel syntax.
328 (OP_sI): Handle intel syntax.
329 (OP_OFF): Handle intel syntax.
333 1999-01-27 Doug Evans <devans@casey.cygnus.com>
335 * fr30-opc.h,fr30-opc.c: Rebuild.
336 * i960c-opc.h,i960c-opc.c: Rebuild.
337 * m32r-opc.c: Rebuild.
339 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
341 * hppa-dis.c: revert HP merge changes until HP gives us
344 1999-01-19 Nick Clifton <nickc@cygnus.com>
346 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
347 offsets as well as symbloic address.
349 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
351 * hppa-dis.c: fix comments and some indentation.
353 1999-01-12 Doug Evans <devans@casey.cygnus.com>
355 * fr30-opc.c,i960c-opc.c: Regenerate.
357 1999-01-11 Doug Evans <devans@casey.cygnus.com>
359 * fr30-opc.c: Regenerate.
361 1999-01-06 Doug Evans <devans@casey.cygnus.com>
363 * m32r-dis.c: Regenerate.
365 1999-01-05 Doug Evans <devans@casey.cygnus.com>
367 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
368 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
369 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
371 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
373 * configure.in: Require autoconf 2.12.1 or higher.
375 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
377 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
379 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
381 * fr30-opc.c: Regenerated.
383 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
385 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
387 1998-12-15 Dave Brolley <brolley@cygnus.com>
389 * fr30-opc.c,fr30-opc.h: Regenerated.
391 1998-12-14 Dave Brolley <brolley@cygnus.com>
393 * fr30-opc.c,fr30-opc.h: Regenerated.
395 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
397 * fr30-opc.c,fr30-opc.h: Regenerated.
399 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
401 * m32r-opc.c: Regenerate.
403 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
405 * dis-buf.c (generic_strcat_address): reformat to GNU coding
406 conventions. change sprintf call to an sprintf_vma call.
408 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
410 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
412 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
414 The following changes were made by
415 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
416 David Taylor <taylor@texas.cygnus.com>, and
417 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
418 merge in changes by HP; HP did not create ChangeLog entries.
420 * dis-buf.c (generic_strcat_address): new function.
422 * hppa-dis.c: Changes to improve hppa disassembly.
423 Changed formatting in : reg_names, fp_reg_names,control_reg,
424 New variables : sign_extension_names, deposit_names, conversion_names
425 float_test_names, compare_cond_names_double, add_cond_names_double,
426 logical_cond_names_double, unit_cond_names_double,
427 branch_push_pop_names, saturation_names, shift_names, mix_names,
428 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
429 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
430 (fput_const): renamed as fput_hex_const
432 - use the macros fputs_filtered and
433 fput_decimal_const whenever possible; calls to sign_extend require
434 2 params -- add a missing second param of 0.
435 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
436 architecture version number of current machine. HP folks are
437 trying to handle situation where the target program was compiled
438 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
440 - added new cases : 'g', 'B', 'm'
441 - added cases specifically for PA 2.0
442 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
443 - calls to fput_const become calls to fput_hex_const
445 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
447 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
448 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
449 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
450 * Makefile.in: Rebuilt.
451 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
453 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
454 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
456 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
458 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
460 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
462 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
464 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
465 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
467 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
469 * fr30-opc.c: Regenerate.
471 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
473 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
475 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
477 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
479 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
481 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
483 1998-11-30 Doug Evans <devans@casey.cygnus.com>
485 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
486 CGEN_INSN_BASE_VALUE.
487 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
488 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
490 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
492 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
494 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
496 * fr30-asm.c,fr30-dis.c: Regenerated.
498 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
500 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
502 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
504 * fr30-opc.c: Regenerated.
506 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
508 * fr30-opc.c: Regenerated.
509 * fr30-opc.h: Regenerated.
510 * fr30-dis.c: Regenerated.
511 * fr30-asm.c: Regenerated.
513 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
515 * mips-opc.c (sync.p,sync.l): Swap insn values.
517 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
519 * fr30-opc.c: Regenerate.
521 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
523 * fr30-opc.c: Regenerated.
524 * fr30-opc.h: Regenerated.
526 1998-11-18 Doug Evans <devans@casey.cygnus.com>
528 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
529 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
531 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
533 * fr30-opc.c: Regenerated.
535 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
537 * fr30-opc.c: Regenerated.
538 * fr30-opc.h: Regenerated.
539 * fr30-dis.c: Regenerated.
540 * fr30-asm.c: Regenerated.
542 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
544 * po/opcodes.pot: Regenerated.
545 * fr30-opc.c: Regenerated.
546 * fr30-opc.h: Regenerated.
547 * fr30-dis.c: Regenerated.
548 * fr30-asm.c: Regenerated.
550 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
552 * disassemble.c (disassembler): Add support for FR30 target.
554 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
556 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
557 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
559 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
561 * po/opcodes.pot: Regenerate.
562 * po/POTFILES.in: Regenerate.
563 * fr30-opc.c: Regenerate.
564 * fr30-opc.h: Regenerate.
566 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
568 * m32r-asm.c: Regenerate.
570 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
572 * configure.in: Added case for bfd_fr30_arch.
573 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
574 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
575 (CLEANFILES): Added stamp-fr30.
577 * fr30-asm.c: New file.
578 * fr30-dis.c: New file.
579 * fr30-opc.c: New file.
580 * fr30-opc.h: New file.
581 * po/POTFILES.in: Regenerated
582 * po/opcodes.pot: Regenerated
584 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
586 * configure.in: detect cygwin* instead of cygwin32*
587 * configure: regenerate
589 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
591 * mips-opc.c (IS_M): Added.
593 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
595 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
597 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
599 * m32r-opc.h,m32r-opc.c: Regenerate.
601 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
603 * i386-dis.c (OP_3DNowSuffix): New static function.
606 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
607 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
608 (insn_codep): New static variable.
609 (print_insn_x86): Init insn_codep after prefixes.
610 (grps): Add GRP14 entries for prefetch, prefetchw.
613 From Jeff B Epler <jepler@usgs.gov>
614 * i386-dis.c (Suffix3DNow): New table.
616 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
618 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
620 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
622 * d10v-dis.c (print_operand): If num is nonzero, then
623 add OPERAND_ACC1, not OPERAND_ACC0.
625 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
627 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
630 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
632 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
635 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
637 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
639 1998-09-09 Michael Meissner <meissner@cygnus.com>
641 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
644 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
646 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
648 (print_insn_little_arm): Detect Thumb symbols in elf object
651 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
653 * alpha-dis.c (print_insn_alpha): Use the machine type to
654 decide which PALcode set to include.
656 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
658 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
660 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
662 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
663 MSUB and MSUBS instructions.
665 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
667 * ppc-opc.c (powerpc_operands): Omit parens around additions in
670 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
672 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
673 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
674 +, -, and d for ColdFire.
676 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
677 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
678 (extract_mbe): Likewise.
680 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
682 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
684 * m10300-opc.c: First cut at UDF instructions.
686 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
688 * m32r-opc.c: Regenerate (remove semantic descriptions).
690 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
692 * arm-dis.c (print_insn_big_arm): Fix indentation.
693 (print_insn_little_arm): Likewise.
695 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
697 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
699 (print_insn_little_arm): Likewise.
701 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
703 Move all global state data into opcode table struct, and treat
704 opcode table as something that is "opened/closed".
705 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
706 (cgen_asm_init): Delete.
707 (cgen_set_parse_operand_fn): New function.
708 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
709 (cgen_dis_init): Delete.
710 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
711 (cgen_current_{opcode_table_mach,endian}): Delete.
712 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
714 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
716 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
719 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
721 * m10300-opc.c: Add entries for "no_match_operands" field in
724 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
726 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
728 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
730 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
732 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
734 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
736 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
738 (OP_J): Remove unnecessary subtraction when 16-bit displacement
739 will be masked later.
741 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
743 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
745 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
747 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
749 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
751 * m10300-dis.c: Only recognize instructions from the currently
753 * m10300-opc.c: Add field indicating the particular variant of
754 the mn10300 each instruction is available on.
756 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
758 * configure.in: For bfd_vax_arch, build vax-dis.lo.
759 * Makefile.am: Rebuild dependencies.
760 (CFILES): Add vax-dis.c.
761 (ALL_MACHINES): Add vax-dis.lo.
762 * aclocal.m4: Rebuild with current libtool.
763 * configure, Makefile.in: Rebuild.
765 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
767 * vax-dis.c: New file, from work by Pauline Middelink
768 <middelin@polyware.iaf.nl>.
769 * disassemble.c (ARCH_vax): Define if ARCH_all.
770 (disassembler): Add case for ARCH_vax.
771 * makefile.vms: Support compilation on vms/vax.
773 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
775 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
776 related to sign extension and the size of ints.
778 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
780 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
781 instructions. Support (sp) addressing mode by expanding it into
784 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
786 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
788 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
790 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
792 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
794 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
797 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
799 * mips-dis.c (print_insn_little_mips): Previously, instruction
800 printing references the symbol table to determine whether the
801 instruction resides in a block regular instructions or mips16
802 instructions. However, when the disassembler gets used in other
803 environments where the symbol table is not present, we no longer
804 rely in the symbol table, rather, use the low bit of the
805 instructions address to guess. There should be no change for usage
806 of the disassembler in host based programs, gdb, objdump.
807 (print_insn_big_mips): ditto.
808 (print_insn_mips): ditto
810 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
812 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
814 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
816 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
818 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
820 * i386-dis.c (index16): Add '%' to register names. Use ','
823 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
825 * i386-dis.c: Don't print opcode suffix when we can figure out the
826 size (and gas can!) by register operands, or from the default
828 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
830 (dis386, dis386_twobyte, grps): Use new suffix macros.
831 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
832 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
833 order of cmps operands to agree with Intel docs. Correct operand
834 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
835 agree with Intel docs.
836 (print_insn_x86): Print orphan fwait before other prefixes.
837 Return correct byte count for orphan fwait with prefixes. Don't
838 print `bound' operands in reverse order.
839 (ckprefix): Stop accumulating prefixes if we get fwait.
840 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
842 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
844 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
845 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
847 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
849 Fix problems when bfd_vma is wider than long.
850 * i386-dis.c: Make op_address and start_pc unsigned.
851 (set_op): Make parameter unsigned.
852 (print_insn_x86): Cast to bfd_vma when passing a value to
854 * ns32k-dis.c (CORE_ADDR): Don't define.
855 (print_insn_ns32k): Change type of addr to bfd_vma. Use
856 bfd_scan_vma to read back address.
857 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
859 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
860 (NEXTULONG): New definition.
861 (print_insn_m68k): Avoid overflow when computing third argument of
863 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
864 Use disp instead of val to store offset values.
865 (print_indexed): Use base_disp instead of word to store base
866 displacement, to avoid overflow.
867 * m10300-dis.c (disassemble): Cast value to long when computing
868 pc-relative address, to get correct sign extension.
870 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
872 * m32r-opc.c: Regenerate.
874 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
876 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
877 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
879 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
881 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
883 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
885 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
887 (OP_DSreg): Rename from OP_DSSI.
888 (OP_ESreg): Rename from OP_ESDI.
889 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
891 (append_seg): Rename from append_prefix.
892 (ptr_reg): New function.
893 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
895 (PREFIX_ADDR): Rename from PREFIX_ADR.
896 (float_reg): Add non-broken opcodes for people who don't want
899 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
901 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
904 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
906 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
908 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
910 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
911 0; produce error message for shifts of size 32 (or 64 for 64-bit
912 shifts), because the hardware doesn't support them.
914 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
916 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
917 LONG_2, LONG_2b formats to use this new operand.
919 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
921 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
923 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
925 * sparc-dis.c (print_insn_sparc): big endian instruction / little
928 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
930 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
931 and SHORT_B3b formats to use Rb instead of Ra.
933 Add FLAG_MUL16 to MUL2XH opcode.
935 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
936 to existing 1.1.1 parallelisation prohibition procedure.
938 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
940 * m32r-asm.c,m32r-dis.c: Regenerate.
942 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
944 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
945 with a shift count of 0.
947 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
949 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
950 (cgen_hw_lookup_by_num): New function.
952 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
954 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
956 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
958 * sparc-dis.c (print_insn_sparc): Always fetch instructions
959 as big-endian on SPARClite.
961 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
963 * d30v-opc.c (pre_defined_register): Remove alias for r0.
965 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
967 * po/Make-in (install-info): New target.
969 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
971 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
972 * configure: Rebuild.
974 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
976 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
977 variety of ISA2 instructions to set bottom ten bits of trap code.
979 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
981 * Makefile.am (config.status): Add explicit target so that
982 config.status depends upon bfd/configure.in.
983 * Makefile.in: Rebuild.
985 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
987 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
988 instructions to set bottom ten bits of break code.
989 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
990 for above optional argument.
992 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
994 * makefile.vms: Run dec c with /nodebug.
996 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
998 * Makefile.in: Rebuilt.
999 * Makefile.am: Regenerated dependencies with mkdep.
1001 * opintl.h (_): Define as dgettext.
1003 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1005 * cgen-asm.c: Internationalised.
1006 * m32r-asm.c: Internationalised.
1007 * m32r-dis.c: Internationalised.
1008 * m32r-opc.c: Internationalised.
1010 * aclocal.m4: Regenerated.
1011 * configure: Regenerated.
1012 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1013 * Makefile.in: Rebuild.
1014 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1015 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1017 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1019 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1021 * aclocal.m4, configure: Rebuild with current tools.
1023 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1025 * opintl.h: New file - contains internationalisation macros used
1026 by source files in this directory.
1027 * po/: New subdirectory - contains internationalisation files.
1028 * po/Make-in: New file - Makefile constructor.
1029 * po/POTFILES.in: New file - list of files in opcodes directory
1030 that should be scan for internationalisation macros.
1031 * po/opcodes.pot: New file - list of internationisation strings
1032 found in files mentioned in po/POTFILES.in.
1033 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1034 entry. Add intl directory to include paths.
1035 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1036 HAVE_STRCPY, HAVE_LC_MESSAGES
1037 * configure.in: Add rule to build Makefile in po subdirectory.
1038 * Makefile.in: Rebuilt.
1039 * aclocal.m4: Rebuilt.
1040 * config.in: Rebuilt.
1041 * configure: Rebuilt.
1042 * alpha-opc.c: Internationalised.
1043 * arc-dis.c: Internationalised.
1044 * arc-opc.c: Internationalised.
1045 * arm-dis.c: Internationalised.
1046 * cgen-asm.c: Internationalised.
1047 * d30v-dis.c: Internationalised.
1048 * dis-buf.c: Internationalised.
1049 * h8300-dis.c: Internationalised.
1050 * h8500-dis.c: Internationalised.
1051 * i386-dis.c: Internationalised.
1052 * m10200-dis.c: Internationalised.
1053 * m10300-dis.c: Internationalised.
1054 * m68k-dis.c: Internationalised.
1055 * m88k-dis.c: Internationalised.
1056 * mips-dis.c: Internationalised.
1057 * ns32k-dis.c: Internationalised.
1058 * opintl.h: Internationalised.
1059 * ppc-opc.c: Internationalised.
1060 * sparc-dis.c: Internationalised.
1061 * v850-dis.c: Internationalised.
1062 * v850-opc.c: Internationalised.
1064 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1066 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1067 (asm_hash_table_entries): New variable.
1068 (cgen_asm_init): Free asm_hash_table_entries.
1069 (hash_insn_array,hash_insn_list): New functions.
1070 (build_asm_hash_table): Use them. Hash macro insns as well.
1071 (cgen_asm_lookup_insn): Update.
1072 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1073 (dis_hash_table_entries): New variable.
1074 (cgen_dis_init): Free dis_hash_table_entries.
1075 (hash_insn_array,hash_insn_list): New functions.
1076 (build_dis_hash_table): Use them. Hash macro insns as well.
1077 (cgen_dis_lookup_insn): Update.
1078 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1079 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1080 (cgen_macro_insn_count): New function.
1081 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1083 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1085 * i386-dis.c (OP_DSSI): Print segment override.
1087 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1089 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1092 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1094 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1095 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1096 * configure.in: Define and substitute WIN32LDFLAGS and
1098 * aclocal.m4: Rebuild with new libtool.
1099 * configure, Makefile.in: Rebuild.
1101 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1103 * m32r-opc.c: Regenerate.
1105 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1107 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1108 before trying to copy it.
1109 * Makefile.in: Rebuild.
1111 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1113 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1115 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1117 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1118 from an arbitrary valid buffer instead of fetching them on demand
1120 (invalid_float): use bit_extract_simple() instead of bit_extract().
1122 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1124 From H.J. Lu <hjl@gnu.org>:
1125 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1128 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1130 * Branched binutils 2.9.
1132 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1134 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1135 disassembling last 4 bytes of a section.
1137 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1139 Fix some gcc -Wall warnings:
1140 * arc-dis.c (print_insn): Add casts to avoid warnings.
1141 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1142 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1143 * m10200-dis.c (disassemble): Likewise.
1144 * m10300-dis.c (disassemble): Likewise.
1145 * ns32k-dis.c (print_insn_ns32k): Likewise.
1146 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1147 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1148 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1149 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1150 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1151 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1152 * tic80-dis.c (print_one_instruction): Likewise.
1153 * w65-dis.c (print_operand): Likewise.
1154 * z8k-dis.c (fetch_data): Likewise.
1155 * a29k-dis.c: Add return type for find_byte_func_type.
1156 * arc-opc.c: Include <stdio.h>. Remove declarations of
1157 insert_multshift and extract_multshift.
1158 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1160 (extract_value): Fully parenthesize expression.
1161 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1162 * h8500-opc.h (h8500_table): Fully bracket initializer.
1163 * w65-opc.h (optable): Likewise.
1164 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1165 * i386-dis.c (OP_E): Initialize local variables.
1166 * m10200-dis.c (print_insn_mn10200): Likewise.
1167 * mips-dis.c (print_insn_mips16): Likewise.
1168 * sh-dis.c (print_insn_shx): Likewise.
1169 * v850-dis.c (print_insn_v850): Likewise.
1170 * ns32k-dis.c (print_insn_arg): Declare.
1171 (get_displacement, invalid_float): Declare.
1172 (list_search, sign_extend, flip_bytes): Declare return type.
1173 (get_displacement): Likewise.
1174 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1176 (print_insn_ns32k): Make i unsigned.
1177 (invalid_float): Make static. Declare type of val.
1178 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1179 on each for iteration.
1180 * tic30-dis.c (get_indirect_operand): Likewise.
1181 * z8k-dis.c (print_insn_z8001): Declare return type.
1182 (print_insn_z8002): Likewise.
1183 (unparse_instr): Fix sprintf format strings.
1185 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1187 * mips-opc.c: Add "sync.l" and "sync.p".
1189 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1191 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1192 default m68k variant to recognize.
1194 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1195 (ctrl, cobr, mem, ea): Likewise.
1196 (print_addr): Likewise. Remove cast.
1197 (ea): Cast argument of print_addr to bfd_vma.
1199 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1201 (cgen_parse_unsigned_integer): Likewise.
1202 (cgen_parse_address): Likewise.
1204 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1206 * i960-dis.c (ctrl): Add full braces to structure initialization.
1207 (cobr, mem, reg): Likewise.
1208 (ea): Correct parenthesization in expression.
1210 * cgen-asm.c: Include <ctype.h>.
1211 (build_asm_hash_table): Remove unused local variable i.
1212 (cgen_parse_keyword): Add casts to avoid warnings.
1214 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1215 symbol. Fix indentation.
1216 (print_insn_little_arm): Likewise.
1218 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1220 * configure.in: Use AM_DISABLE_SHARED.
1221 * aclocal.m4, configure: Rebuild with libtool 1.2.
1223 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1225 These patches are courtesy of Jonathan Walton and Tony Thompson
1226 (athompso@cambridge.arm.com).
1228 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1231 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1232 both the offset and the label closest to the destination.
1234 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1236 * m32r-opc.h: Regenerate.
1238 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1240 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1242 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1244 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1245 assume that info->symbols is non-empty.
1247 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1249 * alpha-opc.c (cvtqs) There is no such thing.
1250 (cvttq): Missing most of the /*d variants.
1252 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1254 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1255 delayed branches or jumps.
1257 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1259 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1261 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1262 * tic30-dis.c (print_branch): Likewise.
1264 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1266 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1267 saved_symbol code as it is no longer needed.
1269 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1271 * cgen-asm.c: Include symcat.h.
1272 * cgen-dis.c,cgen-opc.c: Ditto.
1273 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1275 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1277 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1279 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1281 * m32r-opc.[ch]: Regenerate.
1283 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1285 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1286 arguments. Don't perform validation here.
1287 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1289 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1291 * m32r-opc.c: Regenerate.
1293 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1295 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1296 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1298 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1300 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1302 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1304 * configure.in: Get the version number from BFD.
1305 * configure: Rebuild.
1307 From H.J. Lu <hjl@gnu.org>:
1308 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1309 * Makefile.in: Rebuild.
1311 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1313 * m32r-opc.c: Regenerate.
1314 * m32r-opc.h: Regenerate.
1316 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1318 * m32r-opc.c: Regenerate.
1320 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1322 Fix rac to accept only a0:
1323 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1324 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1325 Introduce OPERAND_GPR.
1326 * d10v-dis.c (print_operand): Likewise.
1328 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1330 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1331 (cgen_hw_lookup): Make result const.
1332 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1334 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1336 * configure, aclocal.m4: Rebuild with new libtool.
1338 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1340 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1341 instructions use a PC relative branch, not absolute.
1343 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1345 * configure.in: Set libtool_enable_shared rather than
1346 libtool_shared. Remove diversion hack.
1347 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1349 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1351 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1352 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1354 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1356 * tic30-dis.c: New file.
1357 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1358 * configure.in: Handle bfd_tic30_arch.
1359 * Makefile.am: Rebuild dependencies.
1360 (CFILES): Add tic30-dis.c
1361 (ALL_MACHINES): Add tic30-dis.lo.
1362 * configure, Makefile.in: Rebuild.
1364 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1366 * m32r-opc.h (HAVE_CPU_M32R): Define.
1368 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1370 * v850-opc.c (insertion routines): If both alignment and size is
1371 wrong then report this.
1373 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1375 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1376 Only recognize instructions for the current target_processor.
1378 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1380 * d10v-dis.c (PC_MASK): Correct value.
1381 (print_operand): If there's a reloc, don't calculate the
1382 address because they could be in different sections.
1384 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1386 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1387 instruction after the 4650's "mul" instruction; nobody's using the
1388 4010 these days. If object files someday indicate which processor
1389 variant they're intended for, we can do a better job at this.
1391 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1393 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1394 table provided entry size. Use CGEN_INSN_MNEMONIC.
1395 (cgen_parse_keyword): Rewrite.
1396 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1397 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1398 * cgen-opc.c: Clean up pass over `struct foo' usage.
1399 (cgen_keyword_lookup_value): Handle "" entry.
1400 (cgen_keyword_add): Likewise.
1402 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1404 * mips-opc.c: Add FP_D to s.d instruction flags.
1406 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1408 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1410 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1412 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1413 PC relative offset forms before the 15 bit forms. An assembler command
1414 line option now chooses the default.
1416 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1418 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1419 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1421 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1423 * configure: Only build libopcodes shared if --enable-shared's value
1424 was `yes', or was set to `*opcodes*'.
1425 * aclocal.m4: Likewise.
1426 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1427 original source of this bit of code. It's not clear what the best fix
1430 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1432 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1433 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1434 offset forms before the 15 bit forms, to default to the long forms.
1436 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1438 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1440 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1442 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1443 symbol if none is present.
1444 (print_insn_big_arm): Prevent examination of stored symbol if
1447 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1449 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1451 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1453 * disassemble.c: Remove disasm_symaddr() function.
1455 * arm-dis.c: Use info->symbol instead of info->flags to determine
1456 if disassmbly should be in Thumb or Arm mode.
1458 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1460 * arm-dis.c: Add support for disassembling Thumb opcodes.
1461 (print_insn_thumb): New function.
1463 * disassemble.c (disasm_symaddr): New function.
1465 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1466 (thumb_opcodes): Table of Thumb opcodes.
1468 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1470 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1472 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1473 and 'v' as operand types.
1475 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1477 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1478 <olivier.carmona@di.epfl.ch>.
1479 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1480 which has a two word opcode with a one word argument.
1482 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1484 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1485 unsigned, not signed.
1486 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1488 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1490 * d10v-dis.c (print_operand):
1491 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1493 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1495 * d10v-opc.c (OPERAND_FLAG): Split into:
1496 (OPERAND_FFLAG, OPERAND_CFLAG) .
1500 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1502 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1503 field for all INSN_MACRO's.
1504 * mips16-opc.c: same
1506 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1508 * mips-opc.c (sync,cache): These are 3900 insns.
1510 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1512 sh-opc.h (sh_table): Remove ftst/nan.
1514 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1516 * mips-opc.c (ffc, ffs): Fix mask.
1518 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1520 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1523 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1525 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1526 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1528 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1530 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1531 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1533 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1535 * v850-dis.c (disassemble): Replace // with /* ... */
1537 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1539 * sparc-opc.c: Add wr & rd for v9a asr's.
1540 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1541 (v9a_asr_reg_names): New variable.
1542 Patch from David Miller <davem@vger.rutgers.edu>.
1544 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1546 * sparc-opc.c (v9notv9a): New insn type.
1547 (IMPDEP): Move to the end to not conflict with edge8 et al.
1548 Patch from David Miller <davem@vger.rutgers.edu>.
1550 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1552 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1554 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1556 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1558 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1560 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1561 of disassemble_info structure to determine if an overlay address
1562 has a matching symbol in low memory.
1564 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1565 new symbol_at_address_func field in disassemble_info structure.
1567 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1569 * v850-opc.c (extract_d22): Use signed arithmatic.
1571 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1573 * mips-opc.c: Three op mult is not an ISA insn.
1575 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1577 * mips-opc.c: Fix formatting.
1579 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1581 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1582 than assuming that char is signed. Explicitly sign extend 16 bit
1583 values, rather than assuming that short is 16 bits.
1584 (OP_sI, OP_J, OP_DIR): Likewise.
1586 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1588 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1591 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1593 * v850-opc.c: Fix typo in comment.
1595 * v850-dis.c (disassemble): Add test of processor type when
1596 determining opcodes.
1598 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1600 * configure.in: Use a diversion to set enable_shared before the
1601 arguments are parsed.
1602 * configure: Rebuild.
1604 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1606 * m68k-opc.c (TBL1): Use ! rather than `.
1607 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1609 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1611 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1613 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1615 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1618 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1619 * aclocal.m4: Rebuild with new libtool.
1620 * configure: Rebuild.
1622 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1624 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1626 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1628 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1630 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1632 * v850-opc.c (v850_opcodes): Further rearrangements.
1634 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1636 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1638 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1640 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1643 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1645 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1647 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1649 * v850-opc.c: Initialise processors field of v850_opcode structure.
1651 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1653 Merge changes from Martin Hunt:
1655 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1657 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1658 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1659 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1661 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1663 * d30v-dis.c (print_insn): First operand of d*i (delayed
1664 branch) instructions is relative.
1666 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1667 (d30v_operand_table): Add IMM6S3 type.
1668 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1670 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1671 and cmp instructions.
1673 * d30v-opc.c: Correct entries for repeat*, and sat*.
1674 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1675 types. Correct several formats.
1677 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1679 * d30v-opc.c (pre_defined_registers): Change control registers.
1681 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1682 SHORT_C2. Manual was incorrect.
1684 * d30v-dis.c (lookup_opcode): Return value now indicates
1685 if an opcode has a short and a long form. Used for deciding
1686 to append a ".s" or ".l".
1687 (print_insn): Append a ".s" to an instruction if it is
1688 the short form and ".l" if it is a long form. Do not append
1689 anything if the instruction has only one possible size.
1691 * d30v-opc.c: Change mulx2h to require an even register.
1692 New form: SHORT_A2; a SHORT_A form that needs an even
1693 register as the first operand.
1695 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1696 instruction was not being disassembled if there were an odd
1697 number of instructions.
1699 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1701 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1703 * v850-dis.c (disassemble): Improved display of register lists.
1705 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1707 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1708 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1709 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1710 fandnot1s, fandnot2s.
1712 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1714 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1716 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1718 * cgen-asm.c (cgen_parse_address): New argument resultp.
1719 All callers updated.
1720 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1722 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1724 * mn10200-dis.c (disassemble): PC relative instructions are
1725 relative to the next instruction, not the current instruction.
1727 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1729 * v850-dis.c (disassemble): Only signed extend values that are not
1730 returned by extract functions.
1731 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1733 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1735 * v850-opc.c: Update comments. Remove use of
1736 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1738 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1740 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1742 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1744 * configure: Rebuilt with latest devo autoconf for NT support.
1746 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1748 * v850-dis.c (disassemble): Use curly brace syntax for register
1751 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1752 where r0 is being used as a destination register.
1754 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1756 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1758 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1760 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1762 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1764 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1765 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1768 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1770 * configure (cgen_files): Add support for v850e target.
1771 * configure.in (cgen_files): Add support for v850e target.
1773 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1775 * configure (cgen_files): Add support for v850ea target.
1776 * configure.in (cgen_files): Add support for v850ea target.
1778 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1780 * configure.in (bfd_arc_arch): Add.
1781 * configure: Rebuild.
1782 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1783 * Makefile.in: Rebuild.
1784 * arc-dis.c, arc-opc.c: New files.
1785 * disassemble.c (ARCH_all): Define ARCH_arc.
1786 (disassembler): Add ARC support.
1788 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1790 * v850-dis.c (disassemble): Add support for v850EA instructions.
1792 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1793 (v850_opcodes): Add v850EA instructions.
1795 * v850-dis.c (disassemble): Add support for v850E instructions.
1797 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1798 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1799 insert_spe, extract_spe): New Functions.
1800 (v850_opcodes): Add v850E instructions.
1802 * v850-opc.c: Reorganised and re-layed out to improve readability
1805 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1807 * configure: Rebuild with autoconf 2.12.1.
1809 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1811 * aclocal.m4, configure: Rebuild with new automake patches.
1813 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1815 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1816 * acinclude.m4: Just include acinclude.m4 from BFD.
1817 * aclocal.m4, configure: Rebuild.
1819 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1821 * Makefile.am: New file, based on old Makefile.in.
1822 * acconfig.h: New file.
1823 * acinclude.m4: New file.
1824 * stamp-h.in: New file.
1825 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1826 Removed shared library handling; now handled by libtool. Replace
1827 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1828 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1829 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1830 handling in AC_OUTPUT.
1831 * dep-in.sed: Change .o to .lo.
1832 * Makefile.in: Now built with automake.
1833 * aclocal.m4: Now built with aclocal.
1834 * config.in, configure: Rebuild.
1836 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1838 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1840 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1842 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1844 * sparc-dis.c (sorted_opcodes): New static local.
1845 (struct opcode_hash): `opcode' is pointer to const element.
1846 (build_hash): First arg is now table of sorted pointers.
1847 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1848 (compare_opcodes): Update.
1850 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1852 * cgen-opc.c: #include <ctype.h>.
1853 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1854 Handle case insensitive hashing.
1855 (hash_keyword_value): Change type of `value' to unsigned int.
1857 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1859 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1860 precision FP, mark it as such. Likewise for double precision
1861 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1864 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1866 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1868 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1869 nesting depth when all the macros are expanded.
1871 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1873 * sparc-opc.c: The fcmp v9a instructions take an integer register
1874 as a destination, not a floating point register. From Christian
1875 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1877 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1879 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1880 syntax. From Roman Hodek
1881 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1883 * i386-dis.c (twobyte_has_modrm): Fix pand.
1885 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1887 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1889 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1891 * arm-dis.c: Add prototypes for arm_decode_shift and
1894 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1896 * mips-opc.c: Add r3900 insns.
1898 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1900 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1901 print delay slot instructions on the same line. When using a PC
1902 relative load, add a comment with the value being loaded if it can
1905 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1907 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1908 to pushS/popS for segment regs and byte constant so that
1909 pushw/popw printed when in 16 bit data mode.
1911 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1912 print cbtw, cwtd in 16 bit data mode.
1913 * i386-dis.c (putop): extra case W to support above.
1915 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1916 address size prefix in 16 bit address mode.
1918 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1920 * sh-dis.c: Reindent. Rename local variable fprintf to
1923 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1925 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1927 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1929 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1931 * mips16-opc.c (mip16_opcodes): same.
1933 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1935 * m68k-opc.c (moveb): Change $d to %d.
1937 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1939 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1940 (twobyte_has_modrm): Likewise.
1942 (OP_MMX, OP_EM, OP_MS): New static functions.
1944 * i386-dis.c: Revert patch of April 4. The output now matches
1947 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1949 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1952 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1954 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1956 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1958 * Makefile.in (install): Depend upon installdirs.
1959 (installdirs): New target.
1961 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1963 From Thomas Graichen <graichen@rzpd.de>:
1964 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1965 * configure: Rebuild.
1967 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1969 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1970 Delete string{,s}.h support.
1972 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1974 * cgen-asm.c (cgen_parse_operand_fn): New global.
1975 (cgen_parse_{{,un}signed_integer,address}): Update call to
1976 cgen_parse_operand_fn.
1977 (cgen_init_parse_operand): New function.
1978 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1979 from cgen_asm_init_parse.
1980 (m32r_cgen_assemble_insn): New operand `errmsg'.
1981 Delete call to as_bad, return error message to caller.
1982 (m32r_cgen_asm_hash_keywords): #if 0 out.
1984 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1986 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1988 [case 'J']: Fix typo in register name.
1990 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1992 * configure.in: Substitute SHLIB_LIBS.
1993 * configure: Rebuild.
1994 * Makefile.in (SHLIB_LIBS): New variable.
1995 ($(SHLIB)): Use $(SHLIB_LIBS).
1997 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1999 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2001 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2003 * disassemble.c (disassembler): Handle m32r.
2005 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2007 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2008 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2009 * Makefile.in (CFILES): Add them.
2010 (ALL_MACHINES): Add them.
2011 (dependencies): Regenerate.
2012 * configure.in (cgen_files): New variable.
2013 (bfd_m32r_arch): Add entry.
2014 * configure: Regenerate.
2016 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2018 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2019 * configure: Rebuild.
2021 * Makefile.in: Rebuild dependencies.
2023 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2025 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2028 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2030 * Branched binutils 2.8.
2032 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2034 * m10200-dis.c: Rename from mn10200-dis.c.
2035 * m10200-opc.c: Rename from mn10200-opc.c.
2036 * m10300-dis.c: Rename from mn10300-dis.c
2037 * m10300-opc.c: Rename from mn10300-opc.c.
2038 * Makefile.in: Update accordingly.
2040 * mips16-opc.c: Add mul and dmul macros.
2042 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2044 * makefile.vms: Update CFLAGS, add clean target.
2046 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2048 * mips-opc.c: Add "wait". From Ralf Baechle
2049 <ralf@gnu.ai.mit.edu>.
2051 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2052 * configure, config.in: Rebuild.
2053 * sysdep.h: Include <stdlib.h> if it exists.
2054 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2056 * Makefile.in: Rebuild dependencies.
2058 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2060 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2061 Andrew Bray <andy@madhouse.demon.co.uk>.
2063 * mips-opc.c: Add cast when setting mips_opcodes.
2065 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2067 * v850-dis.c (disassemble): Fix sign extension problem.
2068 * v850-opc.c (extract_d*): Fix sign extension problems to make
2069 disassembly calculate branch offsets correctly.
2071 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2073 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2075 * mips-opc.c: Add dctr and dctw.
2077 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2079 * d30v-dis.c (print_insn): Change the way signed constants
2082 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2084 * Makefile.in (BFD_H): New variable.
2085 (HFILES): New variable.
2086 (CFILES): Add all C files.
2087 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2088 Delete old dependencies, and build new ones.
2089 * dep-in.sed: New file.
2091 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2093 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2095 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2097 * mn10200-opc.c: Change "trap" to "syscall".
2098 * mn10300-opc.c: Add new "syscall" instruction.
2100 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2102 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2103 mulul insns on the coldfire.
2105 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2107 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2108 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2109 (print_insn_little_arm): Likewise.
2111 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2113 Based on patches from H.J. Lu <hjl@lucon.org>:
2114 * i386-dis.c (fetch_data): Add prototype.
2115 * m68k-dis.c (fetch_data): Add prototype.
2116 (dummy_print_address): Add prototype. Make static.
2117 * ppc-opc.c (valid_bo): Add prototype.
2118 * sparc-dis.c (build_hash_table): Add prototype.
2119 (is_delayed_branch, compute_arch_mask): Add prototypes.
2120 (print_insn_sparc): Make several local variables const.
2121 (compare_opcodes): Change arguments to const PTR. Add prototype.
2122 * sparc-opc.c (arg): Change name field to be const.
2123 (lookup_name, lookup_value): Add prototypes. Change table and
2124 name parameters to be const.
2125 (sparc_encode_asi): Change name parameter to be const.
2126 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2127 (sparc_encode_sparclet_cpreg): Likewise.
2128 (sparc_decode_asi): Change return type to be const.
2129 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2130 (sparc_decode_sparclet_cpreg): Likewise.
2132 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2134 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2135 Solaris doesn't like the combined options, and the -f is
2137 (stamp-tshlink, install): Likewise.
2139 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2141 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2144 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2146 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2148 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2150 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2153 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2155 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2157 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2159 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2161 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2163 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2165 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2167 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2168 floatformat_to_double to make portable.
2169 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2172 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2174 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2175 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2177 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2179 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2180 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2182 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2184 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2185 (OFF_SL_BR_SCALED): ... to this, and added the flag
2186 TIC80_OPERAND_BASEREL to the flags word.
2187 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2190 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2192 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2193 Change mips_opcodes from const array to a pointer,
2194 and change bfd_mips_num_opcodes from const int to int,
2195 so that we can increase the size of the mips opcodes table
2198 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2200 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2201 store BITNUM values in the table in one's complement form
2202 to match behavior when assembler is given a raw numeric
2203 value for a BITNUM operand.
2204 * tic80-dis.c (print_operand_bitnum): Ditto.
2206 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2208 * d30v-opc.c: Removed references to FLAG_X.
2210 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2212 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2214 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2216 * Makefile.in: Added d30v object files.
2217 * configure: (bfd_d30v_arch) Rebuilt.
2218 * configure.in: (bfd_d30v_arch) Added new case.
2219 * d30v-dis.c: New file.
2220 * d30v-opc.c: New file.
2221 * disassemble.c (disassembler) Add entry for d30v.
2223 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2225 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2226 representations for the floating point BITNUM values.
2228 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2230 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2231 in the table in one's complement form, as they appear in the
2233 (tic80_symbol_to_value): Use macros to access predefined
2235 (tic80_value_to_symbol): Ditto.
2236 (tic80_next_predefined_symbol): New function.
2237 * tic80-dis.c (print_operand_bitnum): Remove code that did
2238 one's complement for BITNUM values.
2240 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2242 * makefile.vms: Remove 8 bit characters. Update to latest
2245 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2247 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2249 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2251 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2252 (IMM24_PCREL): Likewise.
2254 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2256 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2257 address for an extended PC relative instruction that is not a
2260 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2262 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2265 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2267 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2268 (tic80_opcodes): Sort entries so that long immediate forms
2269 come after short immediate forms, making it easier for
2270 assembler to select the right one for a given operand.
2272 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2274 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2276 (print_insn_mips16): Likewise.
2278 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2280 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2281 a symbol class that restricts translation to just that
2282 class (general register, condition code, etc).
2284 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2286 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2287 and REG_DEST_E for register operands that have to be
2288 an even numbered register. Add REG_FPA for operands that
2289 are one of the floating point accumulator registers.
2290 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2291 (tic80_opcodes): Change entries that need even numbered
2292 register operands to use the new operand table entries.
2293 Add "or" entries that are identical to "or.tt" entries.
2295 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2297 * mips16-opc.c: Add new cases of exit instruction for
2299 * mips-dis.c (print_mips16_insn_arg): Display floating point
2300 registers in operands of exit instruction. Print `$' before
2301 register names in operands of entry and exit instructions.
2303 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2305 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2306 pairs for all predefined symbols recognized by the assembler.
2307 Also used by the disassembling routines.
2308 (tic80_symbol_to_value): New function.
2309 (tic80_value_to_symbol): New function.
2310 * tic80-dis.c (print_operand_control_register,
2311 print_operand_condition_code, print_operand_bitnum):
2312 Remove private tables and use tic80_value_to_symbol function.
2314 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2316 * d10v-dis.c (print_operand): Change address printing
2317 to correctly handle PC wrapping. Fixes PR11490.
2319 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2321 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2324 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2326 * mips-dis.c (print_insn_mips16): Set insn_info information.
2327 (print_mips16_insn_arg): Likewise.
2329 * mips-dis.c (print_insn_mips16): Better handling of an extend
2330 opcode followed by an instruction which can not be extended.
2332 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2334 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2335 coldfire moveb instruction to not allow an address register as
2336 destination. Although the documentation does not indicate that
2337 this is invalid, experiments uncovered unexpected behavior.
2338 Added a comment explaining the situation. Thanks to Andreas
2339 Schwab for pointing this out to me.
2341 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2343 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2344 entries are presorted so that entries with the same mnemonic are
2345 adjacent to each other in the table. Sort the entries for each
2346 instruction so that this is true.
2348 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2350 * m68k-dis.c: Include <libiberty.h>.
2351 (print_insn_m68k): Sort the opcode table on the most significant
2352 nibble of the opcode.
2354 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2357 "vsub", "vst", "xnor", and "xor" instructions.
2358 (V_a1): Renamed from V_a, msb of accumulator reg number.
2359 (V_a0): Add macro, lsb of accumulator reg number.
2361 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2363 * tic80-dis.c (print_insn_tic80): Broke excessively long
2364 function up into several smaller ones and arranged for
2365 the instruction printing function to be callable recursively
2366 to print vector instructions that have both a load and a
2367 math instruction packed into a single opcode.
2368 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2369 to explain why it comes after the other vector opcodes.
2371 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2373 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2374 move insns to handle immediate operands.
2376 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2378 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2379 fix operand mask in the "moveml" entries for the coldfire.
2381 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2383 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2384 New macros for building vector instruction opcodes.
2385 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2386 FMT_LI, which were unused. The field is now a flags field.
2387 Remove some opcodes that are possible, but illegal, such
2388 as long immediate instructions with doubles for immediate
2389 values. Add "vadd" and "vld" instructions.
2391 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2394 the order more logical. Move the shift alias instructions ("rotl",
2395 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2396 interspersed with the regular sr.x and sl.x instructions. Add
2397 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2398 "sub", "subu", "swcr", and "trap".
2400 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2402 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2403 (OFF_SL_PC): Renamed from OFF_SL.
2404 (OFF_SS_BR): New operand type for base relative operand.
2405 (OFF_SL_BR): New operand type for base relative operand.
2406 (REG_BASE): New operand type for base register operand.
2407 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2408 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2409 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2411 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2412 10 char field, padded with spaces on rhs, rather than a string
2413 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2414 than old TIC80_OPERAND_RELATIVE. Add support for new
2415 TIC80_OPERAND_BASEREL flag bit.
2417 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2419 * tic80-dis.c (print_insn_tic80): Print floating point operands
2421 * tic80-opc.c (SPFI): Add single precision floating point
2422 immediate operand type.
2423 (ROTATE): Add rotate operand type for shifts.
2424 (ENDMASK): Add for shifts.
2425 (n): Macro for the 'n' bit.
2426 (i): Macro for the 'i' bit.
2427 (PD): Macro for the 'PD' field.
2428 (P2): Macro for the 'P2' field.
2429 (P1): Macro for the 'P1' field.
2430 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2433 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2435 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2436 adding in current address for pc-relative operands.
2438 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2440 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2441 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2442 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2443 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2444 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2445 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2446 (REG_SCALED, LSI_SCALED): New operand types.
2447 (E): New macro for 'E' bit at bit 27.
2448 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2449 opcodes, including the various size flavors (b,h,w,d) for
2450 the direct load and store instructions.
2452 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2454 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2456 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2457 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2458 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2459 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2460 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2461 masks with "MASK_* & ~M_*" to get the M bit reset.
2462 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2464 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2466 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2467 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2468 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2470 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2471 CC, SICR, and LICR table entries.
2472 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2473 "bcnd", and "brcr" opcodes.
2475 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2477 * ppc-opc.c (powerpc_operands): Make comment match the
2478 actual fields (no shift field).
2479 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2480 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2481 partial implementation, work in progress.
2482 * tic80-opc.c (tic80_operands): Begin construction operands table.
2483 (tic80_opcodes): Continue populating opcodes table and start
2484 filling in the operand indices.
2485 (tic80_num_opcodes): Add this.
2487 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2489 * m68k-opc.c: Add #B case for moveq.
2491 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2493 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2494 before they are used.
2496 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2498 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2499 for "breakpoint" instruction.
2501 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2503 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2504 (dep): Use ALL_CFLAGS rather than CFLAGS.
2506 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2508 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2511 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2513 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2514 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2516 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2518 * mips16-opc.c: Add "abs".
2520 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2522 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2523 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2524 (disassembler): Add bfd_arch_tic80 support to set disassemble
2525 to print_insn_tic80.
2526 * tic80-dis.c (print_insn_tic80): Add stub.
2528 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2530 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2531 * configure: Regenerate with autoconf.
2532 * tic80-dis.c: Add file.
2533 * tic80-opc.c: Add file.
2535 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2537 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2539 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2541 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2542 (mn10200_opcodes): Use it for some logicals and btst insns.
2543 Add "break" and "trap" instructions.
2545 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2547 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2549 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2551 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2552 relative load or add now depends upon whether the instruction is
2555 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2557 * mn10200-dis.c: Finish writing disassembler.
2558 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2559 Fix mask for "jmp (an)".
2561 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2562 handle endianness issues for mn10300.
2564 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2566 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2568 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2569 instruction. Fix opcode field for "movb (imm24),dn".
2571 * mn10200-opc.c (mn10200_operands): Fix insertion position
2574 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2576 * mn10200-opc.c: Create mn10200 opcode table.
2577 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2578 but moving along nicely.
2580 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2582 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2584 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2586 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2587 specifiers for fmovem* instructions.
2589 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2591 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2593 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2595 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2598 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2600 * mn10300-opc.c: Add some comments explaining the various
2603 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2605 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2607 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2610 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2611 operand specifiers in fmovm* instructions.
2613 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2615 * ppc-opc.c (insert_li): Give an error if the offset has the two
2616 least significant bits set.
2618 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2620 * mips-dis.c (print_insn_mips16): Separate the instruction from
2621 the arguments with a tab, not a space.
2623 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2625 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2628 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2631 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2633 * configure: Rebuild with autoconf 2.12.
2635 Add support for mips16 (16 bit MIPS implementation):
2636 * mips16-opc.c: New file.
2637 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2638 (mips16_reg_names): New static array.
2639 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2640 after seeing a 16 bit symbol.
2641 (print_insn_little_mips): Likewise.
2642 (print_insn_mips16): New static function.
2643 (print_mips16_insn_arg): New static function.
2644 * mips-opc.c: Add jalx instruction.
2645 * Makefile.in (mips16-opc.o): New target.
2646 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2647 * configure: Rebuild.
2649 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2651 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2652 operand specifiers in *save, *restore and movem* instructions.
2654 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2657 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2658 register operands for immediate arithmetic, not, neg, negx, and
2659 set according to condition instructions.
2661 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2662 specifier of the effective-address operand in immediate forms of
2663 arithmetic instructions. The specifier for the immediate operand
2664 notes how and where the constant will be stored.
2666 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2668 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2671 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2674 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2676 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2678 * mn10300-dis.c (disassemble): Handle register lists.
2680 * mn10300-opc.c: Fix handling of register list operand for
2681 "call", "ret", and "rets" instructions.
2683 * mn10300-dis.c (disassemble): Print PC-relative and memory
2684 addresses symbolically if possible.
2685 * mn10300-opc.c: Distinguish between absolute memory addresses,
2686 pc-relative offsets & random immediates.
2688 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2690 (disassemble): Handle SPLIT and EXTENDED operands.
2692 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2694 * mn10300-dis.c: Rough cut at printing some operands.
2696 * mn10300-dis.c: Start working on disassembler support.
2697 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2699 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2701 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2703 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2705 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2707 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2709 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2710 register argument is calls and jmp instructions.
2712 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2714 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2715 getx operand. Fix opcode for mulqu imm,dn.
2717 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2719 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2720 in MN10300_OPERAND_SPLIT operands for how many bits
2721 appear in the basic insn word. Add IMM32_HIGH24,
2722 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2723 (mn10300_opcodes): Use new operands as needed.
2725 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2726 for bset, bclr, btst instructions.
2727 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2729 * mn10300-opc.c (mn10300_operands): Remove many redundant
2730 operands. Update opcode table as appropriate.
2731 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2732 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2734 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2736 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2737 operands (for indexed load/stores). Fix bitpos for DI
2738 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2739 few instructions that insert immediates/displacements in the
2740 middle of the instruction. Add IMM8E for 8 bit immediate in
2741 the extended part of an instruction.
2742 (mn10300_operands): Use new opcodes as appropriate.
2744 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2746 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2747 sequential so the assembler never parallelizes it with
2750 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2753 a data/address register that appears in register field 0
2754 and register field 1.
2755 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2757 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2759 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2760 standard disassembly.
2762 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2763 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2764 Recategorize PALcode instructions.
2766 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2768 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2770 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2772 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2773 there are no operand types.
2775 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2777 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2779 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2781 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2783 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2785 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2787 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2788 and sst.w instructions.
2790 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2793 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2795 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2798 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2800 * ppc-opc.c (PPCPWR2): Define.
2801 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2804 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2806 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2807 field for movhu instruction.
2809 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2810 cast value to "long" not "signed long" to keep hpux10
2813 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2815 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2818 * mn10300-opc.c (FMT*): Remove definitions.
2820 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2821 for shift-by-register opcodes.
2823 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2824 into [AD][MN][01] for encoding the position of the register
2827 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2829 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2830 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2832 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2834 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2835 Fix various typos. Add "PAREN" operand.
2836 (MEM, MEM2): Define.
2837 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2838 operands. Fix several typos.
2840 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2843 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2845 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2846 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2848 (mn10300_opcodes): Break opcode format out into its own field.
2849 Update many operand fields to deal with signed vs unsigned
2850 issues. Fix one or two typos in the "mov" instruction
2851 opcode, mask and/or operand fields.
2853 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2855 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2856 m68851 wasn't reset.
2858 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2860 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2861 all opcodes. Very rough cut at operands for all opcodes.
2863 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2866 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2868 * mn10200-opc.c, mn10300-opc.c: New files.
2869 * mn10200-dis.c, mn10300-dis.c: New files.
2870 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2871 * disassemble.c: Break mn10x00 support into 10200 and 10300
2873 * configure.in: Likewise.
2874 * configure: Rebuilt.
2876 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2878 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2880 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2882 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2884 * disassemble (ARCH_mn10x00): Define.
2885 (disassembler): Handle bfd_arch_mn10x00.
2886 * configure.in: Recognize bfd_mn10x00_arch.
2887 * configure: Rebuilt.
2889 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2891 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2892 accordingly. Don't declare functions using op_rtn.
2894 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2896 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2897 params to be more standard.
2898 * (disassemble): Print absolute addresses and symbolic names for
2899 branch and jump targets.
2900 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2902 * (v850_opcodes): Add breakpoint insn.
2904 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2906 * m68k-opc.c: Move the fmovemx data register cases before the
2907 other cases, so that they get recognized before the data register
2908 does gets treated as a degenerate register list.
2910 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2912 * mips-opc.c: Add a case for "div" and "divu" with two registers
2913 and a destination of $0.
2915 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2917 * mips-dis.c (print_insn_arg): Add prototype.
2918 (_print_insn_mips): Ditto.
2920 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2922 * mips-dis.c (print_insn_arg): Print condition code registers as
2925 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2927 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2929 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2931 * v850-dis.c (disassemble): Make static. Provide prototype.
2933 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2935 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2938 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2940 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2941 ']' characters into the output stream.
2942 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2943 Add "memop" field to all opcodes (for the disassembler).
2944 Reorder opcodes so that "nop" comes before "mov" and "jr"
2945 comes before "jarl".
2947 * v850-dis.c (print_insn_v850): Fix typo in last change.
2949 * v850-dis.c (print_insn_v850): Properly handle disassembling
2950 a two byte insn at the end of a memory region when the memory
2951 region's size is only two byte aligned.
2953 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2955 * v850-dis.c (v850_reg_names): Define.
2956 (v850_sreg_names, v850_cc_names): Likewise.
2957 (disassemble): Very rough cut at printing operands (unformatted).
2959 * v850-opc.c (BOP_MASK): Fix.
2960 (v850_opcodes): Fix mask for jarl and jr.
2962 * v850-dis.c: New file. Skeleton for disassembler support.
2963 * Makefile.in Remove v850 references, they're not needed here.
2964 * configure.in: Add v850-dis.o when building v850 toolchains.
2965 * configure: Rebuilt.
2966 * disassemble.c (disassembler): Call v850 disassembler.
2968 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2969 (insert_d8_6, extract_d8_6): New functions.
2970 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2971 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2973 (IF4A, IF4B): Use "D7" instead of "D7S".
2974 (IF4C, IF4D): Use "D8_7" instead of "D8".
2975 (IF4E, IF4F): New. Use "D8_6".
2976 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2977 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2979 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2980 (v850_operands): Change D16 to D16_15, use special insert/extract
2981 routines. New new D16 that uses the generic insert/extract code.
2982 (IF7A, IF7B): Use D16_15.
2983 (IF7C, IF7D): New. Use D16.
2984 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2986 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2987 message. Issue an error if the branch offset is odd.
2989 * v850-opc.c: Add notes about needing special insert/extract
2990 for all the load/store insns, except "ld.b" and "st.b".
2992 * v850-opc.c (insert_d22, extract_d22): New functions.
2993 (v850_operands): Use insert_d22 and extract_d22 for
2995 (insert_d9): Fix range check.
2997 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2999 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3000 and set bits field to D9 and D22 operands.
3002 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3004 * v850-opc.c (v850_operands): Define SR2 operand.
3005 (v850_opcodes): "ldsr" uses R1,SR2.
3007 * v850-opc.c (v850_opcodes): Fix opcode specs for
3008 sld.w, sst.b, sst.h, sst.w, and nop.
3010 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3012 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3013 end of the opcode table.
3015 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3017 * d10v-opc.c (pre_defined_registers): Added register pairs,
3018 "r0-r1", "r2-r3", etc.
3020 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3022 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3023 Create I16U for an unsigned 16bit mmediate operand.
3024 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3026 * v850-opc.c (v850_operands): Define EP operand.
3027 (IF4A, IF4B, IF4C, IF4D): Use EP.
3029 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3030 with immediate operand, "movhi". Tweak "ldsr".
3032 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3033 correct. Get sld.[bhw] and sst.[bhw] closer.
3035 * v850-opc.c (v850_operands): "not" is a two byte insn
3037 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3039 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3041 * v850-opc.c (two): Get order of words correct.
3043 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3045 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3046 register source and destination operands.
3047 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3049 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3050 same thinko in "trap" opcode.
3052 * v850-opc.c (v850_opcodes): Add initializer for size field
3055 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3056 Add D8 for 8-bit unsigned field in short load/store insns.
3057 (IF4A, IF4D): These both need two registers.
3058 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3059 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3060 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3061 for "ldsr" and "stsr".
3062 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3065 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3066 short store word (sst.w).
3068 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3070 * v850-opc.c (v850_operands): Added insert and extract fields,
3071 pointers to functions that handle unusual operand encodings.
3073 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3075 * v850-opc.c (v850_opcodes): Enable "trap".
3077 * v850-opc.c (v850_opcodes): Fix order of displacement
3078 and register for "set1", "clr1", "not1", and "tst1".
3080 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3082 * v850-opc.c (v850_operands): Add "B3" support.
3083 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3086 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3088 * v850-opc.c: Close unterminated comment.
3090 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3092 * v850-opc.c (v850_operands): Add flags field.
3093 (v850_opcodes): add move opcodes.
3095 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3097 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3098 * configure: (bfd_v850v_arch) Add new case.
3099 * configure.in: (bfd_v850_arch) Add new case.
3100 * v850-opc.c: New file.
3102 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3104 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3106 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3108 * d10v-opc.c: Add additional information to the opcode
3109 table to help determinine which instructions can be done
3112 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3114 * mpw-make.sed: Update editing of include pathnames to be
3117 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3119 * arm-opc.h: Added "bx" instruction definition.
3121 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3123 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3125 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3127 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3129 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3131 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3133 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3135 * makefile.vms: Update for alpha-opc changes.
3137 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3139 * i386-dis.c (print_insn_i386): Actually return the correct value.
3140 (ONE, OP_ONE): #ifdef out; not used.
3142 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3144 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3145 Changed subi operand type to treat 0 as 16.
3147 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3149 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3152 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3154 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3155 memory transfer instructions. Add new format string entries %h and %s.
3156 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3159 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3161 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3162 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3164 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * alpha-dis.c (print_insn_alpha_osf): Remove.
3167 (print_insn_alpha_vms): Remove.
3168 (print_insn_alpha): Make globally visible. Chose the register
3169 names based on info->flavour.
3170 * disassemble.c: Always return print_insn_alpha for the alpha.
3172 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3174 * d10v-dis.c (dis_long): Handle unknown opcodes.
3176 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3178 * d10v-opc.c: Changes to support signed and unsigned numbers.
3179 All instructions with the same name that have long and short forms
3180 now end in ".l" or ".s". Divs added.
3181 * d10v-dis.c: Changes to support signed and unsigned numbers.
3183 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3185 * d10v-dis.c: Change all functions to use info->print_address_func.
3187 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3189 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3190 move ccr/sr insns more strict so that the disassembler only
3191 selects them when the addressing mode is data register.
3193 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3194 * d10v-opc.c (pre_defined_registers): Declare.
3195 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3196 to pick a better name for the registers.
3198 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3200 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3201 operands for fexpand and fpmerge. From Christian Kuehnke
3202 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3204 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3206 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3207 print routine. Take new regnames and cpumask arguments.
3208 Kill the environment variable nonsense.
3209 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3210 (print_insn_alpha_vms): New function. Do VMS style regnames.
3211 * disassemble.c (disassembler): Test bfd flavour to pick
3212 between OSF and VMS routines. Default to OSF.
3214 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3216 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3217 * configure: Rebuild.
3218 * Makefile.in (install): Use @INSTALL_SHLIB@.
3220 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3222 * configure: (bfd_d10v_arch) Add new case.
3223 * configure.in: (bfd_d10v_arch) Add new case.
3224 * d10v-dis.c: New file.
3225 * d10v-opc.c: New file.
3226 * disassemble.c (disassembler) Add entry for d10v.
3228 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3230 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3231 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3233 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3235 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3236 distinguish between variants of the instruction set.
3237 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3238 distinguish between variants of the instruction set.
3240 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3242 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3243 the 8086 instruction set.
3244 * i386-dis.c: General cleanups. Make most things static. Add
3245 prototypes. Get rid of static variables aflags and dflags. Pass
3246 them as args (to almost everything).
3248 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3250 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3252 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3254 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3255 if the next arg is marked with SRC_IN_DST. Gross.
3257 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3258 we're looking for and find EXR.
3260 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3261 if we're looking for KBIT and we don't find it.
3263 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3266 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3267 3bit immediate operands.
3269 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3271 * Released binutils 2.7.
3273 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3274 <kkaempf@progis.ac-net.de>.
3276 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3278 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3280 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3282 * sparc-dis.c (print_insn_sparclite): New routine to print
3283 sparclite instructions.
3285 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3287 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3289 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3291 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3292 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3293 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3295 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3297 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3298 Use autoconf-set values.
3299 (docdir, oldincludedir): Removed.
3300 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3302 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3304 * alpha-opc.c: New file.
3305 * alpha-opc.h: Remove.
3306 * alpha-dis.c: Complete rewrite to use new opcode table.
3307 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3308 * configure: Rebuild with autoconf 2.10.
3309 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3310 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3312 (alpha-opc.o): New target.
3314 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3317 Set imm_added_to_rs1 even if the source and destination register
3320 * sparc-opc.c: Add some two operand forms of the wr instruction.
3322 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3324 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3327 * disassemble.c (disassembler): Handle H8/S.
3328 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3330 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3332 * sparc-opc.c: Add beq/teq as aliases for be/te.
3334 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3335 <sergei@msil.sps.mot.com>.
3337 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3339 * makefile.vms: New file.
3341 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3343 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3345 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3348 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3350 * i386-dis.c (OP_OFF): Call append_prefix.
3352 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3354 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3355 unsigned long to silence a warning from the Solaris PowerPC
3358 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3360 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3362 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3364 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3366 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3367 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3368 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3369 cpush, cpusha, cpull sparclet insns.
3371 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3373 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3375 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3377 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3378 Set F_FLOAT on other floating point instructions.
3380 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3382 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3384 (powerpc_opcodes): Add 860/821 specific SPRs.
3386 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3388 * configure.in: Permit --enable-shared to specify a list of
3389 directories. Set and substitute BFD_PICLIST.
3390 * configure: Rebuild.
3391 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3392 uses. Set to @BFD_PICLIST@.
3394 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3396 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3397 not "abs", which may be needed for the absolute in something
3398 like btst #0,@10:8. Print L_3 immediates separately from other
3399 immediates. Change ABSMOV reference to ABS8MEM.
3401 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3403 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3404 (current_arch_mask): New static global.
3405 (compute_arch_mask): New static function.
3406 (print_insn_sparc): Delete sparc_v9_p. New static local
3407 current_mach. Resort opcode table if current_mach changes.
3408 Generalize "insn not supported" test.
3409 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3410 Delete test for v9/!v9.
3411 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3413 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3414 (brfcx): Renamed to FBRX.
3415 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3416 coprocessor mnemonics are not supported on the sparclet).
3417 (condf): Renamed to CONDF.
3418 (SLCBCC2): Delete F_ALIAS flag.
3420 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3422 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3423 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3425 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3427 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3428 that the shared library version number is set correctly.
3430 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3432 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3433 Miles Bader <miles@gnu.ai.mit.edu>.
3434 * configure: Rebuild.
3436 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3438 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3441 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3443 * configure: Rebuild with autoconf 2.8.
3445 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3447 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3448 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3450 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3452 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3453 since they appear as targets in Makefile.in.
3454 * configure: Rebuild.
3456 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3458 * mpw-make.sed: Edit out shared library support bits.
3460 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3462 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3463 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3464 (sparc_opcodes): Add sparclet insns.
3465 (sparclet_cpreg_table): New static local.
3466 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3467 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3469 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3471 * i386-dis.c (index16): New static variable.
3472 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3474 (OP_indirE): Return result of OP_E.
3475 (OP_E): Check for 16 bit addressing mode, and disassemble
3476 correctly. Optimised 32 bit case a little. Don't print
3477 "(base,index,scale)" when sib specifies only an offset.
3479 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3481 * configure.in: Set and substitute SHLIB_DEP.
3482 * configure: Rebuild.
3483 * Makefile.in (SHLIB_DEP): New variable.
3484 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3485 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3486 COMMON_SHLIB, add them to piclist with appropriate modifications.
3487 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3488 here: just use piclist.
3490 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3492 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3493 (print_insn_sparc): Rewrite v9/not-v9 tests.
3494 (compare_opcodes): Likewise.
3495 * sparc-opc.c (MASK_<ARCH>): Define.
3496 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3497 (sparclet,v6notv9): Define.
3498 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3499 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3501 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3503 * configure.in: Call AC_PROG_CC before configure.host.
3504 * configure: Rebuild.
3506 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3508 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3510 * i386-dis.c (onebyte_has_modrm): New static array.
3511 (twobyte_has_modrm): New static array.
3512 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3514 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3519 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3521 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3524 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3526 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3527 m68010up, not just m68020up | cpu32.
3529 * Makefile.in (SONAME): New variable.
3530 ($(SHLINK)): Make a link to the transformed name, as well.
3531 (stamp-tshlink): New target.
3532 (install): Skip stamp-tshlink during install.
3534 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3536 * configure.in: Call AC_ARG_PROGRAM.
3537 * configure: Rebuild.
3538 * Makefile.in (program_transform_name): New variable.
3539 (install): Transform library name before installing it.
3541 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3543 * i960-dis.c (mem): Add HX dcinva instruction.
3545 Support for building as a shared library, based on patches from
3546 Alan Modra <alan@spri.levels.unisa.edu.au>:
3547 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3548 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3549 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3550 * configure: Rebuild.
3551 * Makefile.in (ALLLIBS): New variable.
3552 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3553 (COMMON_SHLIB, SHLINK): New variables.
3554 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3555 (STAGESTUFF): Remove variable.
3556 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3557 (stamp-piclist, piclist): New targets.
3558 ($(SHLIB), $(SHLINK)): New targets.
3559 ($(OFILES)): Depend upon stamp-picdir.
3560 (disassemble.o): Build twice if PICFLAG is set.
3561 (MOSTLYCLEAN): Add pic/*.o.
3562 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3563 (distclean): Remove pic and stamp-picdir.
3564 (install): Install shared libraries.
3565 (stamp-picdir): New target.
3567 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3569 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3570 Print unknown instruction as "unknown", rather than in hex.
3572 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3574 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3576 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3578 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3580 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3582 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3583 when necessary. From Ulrich Drepper
3584 <drepper@myware.rz.uni-karlsruhe.de>.
3586 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3588 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3589 sparc_num_opcodes. Update architecture enum values.
3590 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3591 (sparc_opcode_lookup_arch): New function.
3592 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3593 (sparc_opcodes): Add v9a shutdown insn.
3595 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3597 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3598 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3600 (print_insn_sparc64): Deleted.
3601 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3604 * sparc-opc.c (architecture_pname): Add v9a.
3606 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3608 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3609 incorrectly defined as 0x16 when it should be 0x15.
3610 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3611 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3612 excb (exception barrier) which is defined in the Alpha
3613 Architecture Handbook version 2.
3614 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3615 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3616 disassembled as or, for example.
3618 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3620 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3621 (_print_insn_mips): Change i from int to unsigned int.
3623 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3625 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3626 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3628 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3630 * i386-dis.c: Added Pentium Pro instructions.
3632 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3634 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3637 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3639 * sh-opc.h (sh_nibble_type): Added REG_B.
3640 (sh_arg_type): Added A_REG_B.
3641 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3643 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3645 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3647 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3649 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3651 * Makefile.in (distclean): Remove stamp-h. From Ronald
3652 F. Guilmette <rfg@monkeys.com>.
3654 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3656 From David Mosberger-Tang <davidm@azstarnet.com>:
3657 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3660 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3662 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3663 (sh_table): Added many SH3 opcodes.
3664 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3666 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3668 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3669 (subco,subco.): Mark this PPC, not PPCCOM.
3671 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3673 * configure: Rebuild with autoconf 2.7.
3675 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3677 * configure: Rebuild with autoconf 2.6.
3679 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3681 * configure.in: Sort list of architectures. Accept but do nothing
3682 for alliant, convex, pyramid, romp, and tahoe.
3684 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3686 * a29k-dis.c (print_special): Change num to unsigned int.
3688 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3690 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3693 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3695 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3696 * configure: Rebuilt.
3698 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3700 * configure.in: Add case for bfd_i860_arch.
3701 * configure: Rebuild.
3703 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3705 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3706 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3707 (NEXTDOUBLE): Likewise.
3708 (print_insn_m68k): Don't match fmoveml if there is more than one
3709 register in the list.
3710 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3712 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3714 * m68k-opc.c: Use #W rather than #w.
3715 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3717 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3719 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3720 and likewise for all the dbxx opcodes.
3722 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3724 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3726 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3728 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3729 the VR4100 specific instructions to the mips_opcodes structure.
3731 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3733 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3734 ugly Metrowerks bug in CW6, is fixed in CW7.
3736 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3738 * ppc-opc.c (whole file): Add flags for common/any support.
3740 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3742 * Makefile.in (BISON): Remove macro.
3743 (FLAGS_TO_PASS): Remove BISON.
3745 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3747 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3749 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3750 instructions that take no args by looking at the match mask.
3751 (print_insn_arg): Always print "%" before register names.
3752 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3753 [case '_']: Don't print "@#" before address.
3754 [case 'J']: Use "%s" as format string, not register name.
3755 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3757 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3759 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3762 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3764 From David Mosberger-Tang <davidm@azstarnet.com>
3766 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3767 (alpha_insn_set): added definitions for VAX floating point
3768 instructions (Unix compilers don't generate these, but handcoded
3769 assembly might still use them).
3771 * alpha-dis.c (print_insn_alpha): added support for disassembling
3772 the miscellaneous instructions in the Alpha instruction set.
3774 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3776 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3777 no longer create sysdep.h, sed ppc-opc.c to work around a
3778 serious Metrowerks C bug.
3779 * mpw-make.in: Remove.
3780 * mpw-make.sed: New file, used by mpw-configure to edit
3781 Makefile.in into an MPW makefile.
3783 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3785 * Makefile.in (maintainer-clean): New synonym for realclean.
3787 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3789 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3790 which use '0', '1', and '2' instead. Specify the proper size for
3791 a pmove immediate operand. Correct the pmovefd patterns to be
3792 moves to a register, not from a register.
3793 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3795 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3797 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3798 %psr, %wim, %tbr as F_NOTV9.
3800 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3802 * Makefile.in (Makefile): Just rebuild Makefile when running
3804 (config.h, stamp-h): New targets.
3805 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3806 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3807 rebuilding config.h.
3808 * configure: Rebuild.
3810 * mips-opc.c: Change unaligned loads and stores with "t,A"
3811 operands to use "t,A(b)".
3813 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3815 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3817 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3819 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3820 until 3 instead of until 2.
3822 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3824 * Makefile.in (ALL_CFLAGS): Define.
3825 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3826 (MOSTLYCLEAN): Add config.log.
3827 (distclean): Don't remove config.log.
3828 * configure.in: Substitute HDEFINES.
3829 * configure: Rebuild.
3831 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3833 * sh-opc.h (sh_arg_type): Add F_FR0.
3834 (sh_table, case fmac): Add F_FR0 as first argument.
3836 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3838 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3840 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3842 * sparc-dis.c: Remove all references to NO_V9.
3844 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3846 * aclocal.m4: Just include ../bfd/aclocal.m4.
3847 * configure: Rebuild.
3849 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3851 * sparc-dis.c (X_DISP19): Define.
3852 (print_insn, case 'G'): Use it.
3853 (print_insn, case 'L'): Sign extend displacement.
3855 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3857 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3858 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3859 host_makefile_frag or frags.
3860 * aclocal.m4: New file.
3861 * configure: Rebuild.
3862 * Makefile.in (INSTALL): Set to @INSTALL@.
3863 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3864 (INSTALL_DATA): Set to @INSTALL_DATA@.
3866 (AR_FLAGS): Set to rc rather than qc.
3867 (CC): Define as @CC@.
3868 (CFLAGS): Set to @CFLAGS@.
3869 (@host_makefile_frag@): Remove.
3870 (config.status): Remove dependency upon @frags@.
3872 * configure.in: ../bfd/config.bfd now just sets shell variables.
3873 Use them rather than looking through target Makefile fragments.
3874 * configure: Rebuild.
3876 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3878 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3880 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3882 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3883 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3886 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3887 (lookup_{name,value}): New functions.
3888 (prefetch_table): New static local.
3889 (sparc_{encode,decode}_prefetch): New functions.
3890 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3892 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3894 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3897 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3899 * sh-dis.c: Correct comment on first line of file.
3901 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3903 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3905 * sparc-opc.c (asi, membar): New static locals.
3906 (sparc_{encode,decode}_{asi,membar}): New functions.
3907 (sparc_opcodes, membar insn): Fix.
3908 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3909 Support decoding of membar masks.
3912 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3914 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3916 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3918 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3919 and likewise for the other branches. Add bhs as an alias for bcc,
3920 and likewise for the size variants. Add dbhs as an alias for
3923 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3925 * sh-opc.h (FP sts instructions): Update to match reality.
3927 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3929 * m68k-dis.c: (fpcr_names): Add % before all register names.
3930 (reg_names): Likewise.
3931 (print_insn_arg): Don't explicitly print % before register names.
3932 Add % before register names in static array names. In case 'r',
3933 print data registers as `@(Dn)', not `Dn@'. When printing a
3934 memory address, don't print @# before it.
3935 (print_indexed): Change base_disp and outer_disp from int to
3936 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3937 syntax. Sign extend 8 byte displacement correctly.
3938 (print_base): Print using MIT syntax. Print zpc when appropriate.
3939 Change parameter disp from int to bfd_vma.
3941 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3944 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3946 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3947 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3948 * sh-opc.h (sh_arg_type): Add new operand types.
3949 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3951 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3953 * Makefile.in (distclean): Remove generated file config.h.
3955 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3957 * Makefile.in (distclean): Remove generated file config.h.
3959 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3961 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3963 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3965 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3966 rather than numopcodes. Use m68k_opcodes rather than removed
3967 opcode function. Don't check F_ALIAS.
3968 (print_insn_arg): Change first parameter to be const char *.
3969 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3970 (m68k-opc.o): New target.
3971 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3972 * configure: Rebuild.
3974 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3976 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3977 (opcode_bits, opcode_hash_table): New variables.
3978 (opcodes_initialized): Renamed from opcodes_sorted.
3979 (build_hash_table): New function.
3980 (is_delayed_branch): Use hash table.
3981 (print_insn): Renamed from print_insn_sparc, made static.
3982 Build and use hash table. If !sparc64, ignore sparc64 insns,
3983 and vice-versa if sparc64.
3984 (print_insn_sparc, print_insn_sparc64): New functions.
3985 (compare_opcodes): Move sparc64 opcodes to end.
3986 Print commutative insns with constant second.
3987 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3989 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3991 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3992 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3993 avoids printing a delay slot in a delay slot.
3994 * sh-opc.h (sh_table): Fully bracket last entry.
3996 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3998 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4000 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4002 * configure.in: Get host_makefile_frag from ${srcdir}.
4004 * configure.in: Autoconfiscated. Check for string[s].h. Create
4005 config.h from config.in. Don't set up sysdep.h link.
4006 * sysdep.h: New file.
4007 * configure, config.in: New files, generated from configure.in.
4008 * Makefile.in: Updated to be processed autoconf-style.
4009 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4010 (Makefile): Depend on config.status.
4011 (config.status): New rule.
4012 * configure.bat: Update Makefile substitutions.
4014 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4016 * mips-opc.c (L1): Define.
4017 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4018 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4021 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4023 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4024 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4025 have multiple add units but only a single logical unit.
4027 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4028 shifted by 18, without any insertion or extraction function.
4029 (insert_cr, extract_cr): Remove.
4031 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4033 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4036 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4038 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4039 * sh-opc.h: Add copyright.
4041 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4043 * Makefile.in (crunch-m68k): Delete extra target accidentally
4044 checked in a while ago.
4046 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4048 * sh-opc.h (sh_table): Add SH3 support.
4050 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4052 * sh-opc.h: Added bsrf and braf.
4054 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4056 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4057 bogus [ls]fm{ea,fd} patterns.
4059 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4060 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4061 initialize it from memory. Make function static.
4062 (print_insn_{big,little}_arm): New functions.
4063 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4064 the correct endianness.
4066 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4068 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4071 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4073 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4074 17th, so that it builds again using GCC as the compiler.
4076 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4078 * mips-dis.c (print_insn_little_mips): Cast return value from
4079 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4080 expects an unsigned long, and that might be fewer words of
4081 argument storage (e.g., if bfd_vma is long long on a 32-bit
4083 (print_insn_big_mips): Likewise with bfd_getb32 value.
4084 (_print_insn_mips): Now static.
4086 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4088 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4089 gcc memory hog problem with initializer is fixed.
4091 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4093 Merge in support for Mac MPW as a host.
4094 (Old change descriptions retained for informational value.)
4096 * mpw-config.in (archname): Compute from the config.
4097 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4099 * mpw-config.in (target_arch): Compute from canonical target.
4100 (m68k, mips, powerpc, sparc): Add architectures.
4101 * mpw-make.in (disassemble.c.o): Add.
4102 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4104 * mpw-config.in (BFD_MACHINES): Set to a default value.
4105 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4107 * mpw-make.in (CSEARCH): Add extra-include to search path.
4109 * mpw-config.in (varargs.h): Don't create.
4110 (sysdep.h): Create using forward-include.
4111 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4113 * mpw-config.in: New file, MPW version of configure.in.
4114 * mpw-make.in: New file, MPW version of Makefile.in.
4116 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4118 * alpha-dis.c (print_insn_alpha): Put empty statement after
4121 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4123 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4124 (low_sign_extend): Likewise.
4125 (get_field): Delete unused function.
4126 (set_field, deposit_14, deposit_21): Likewise.
4128 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4130 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4133 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4135 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4137 * alpha-opc.h (OSF_ASMCODE): define
4138 print pal-code names as defined in App C of the
4139 Alpha Architecture Reference Manual
4141 * alpha-dis.c: cleaned up output
4142 print stylized code forms as defined in App A.4.3 of the
4143 Alpha Architecture Reference Manual
4145 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4147 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4149 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4152 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4154 * m68k-dis.c (opcode): New function. Returns address of opcode
4155 table entry given index, even if the opcode table was split to
4156 work around gcc bugs.
4157 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4159 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4160 (reg_names): Now const.
4161 (print_insn_arg): Arrays cacheFieldName and names now const.
4162 (print_indexed): Array scales now const.
4164 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4166 * ppc-opc.c: Sort recently added instructions by minor opcode
4167 number within major opcode number.
4169 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4171 * hppa-dis.c: Include libhppa.h.
4173 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4175 * mips-opc.c: Change dli to use M_DLI, and add dla.
4177 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4179 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4181 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4183 * mips-opc.c: Add r4650 mul instruction.
4185 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4187 * mips-opc.c: Add uld and usd macros for unaligned double load and
4190 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4192 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4193 mfdcr, mtdcr, icbt, iccci.
4195 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4197 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4198 signed char fields to shorts, more portable.
4200 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4202 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4203 char fields as signed chars, since they may have negative values.
4205 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4207 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4208 (mycroft@netbsd.org).
4210 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4212 From "Logg, Ed" <elogg@ea.com>:
4213 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4214 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4217 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4219 * ppc-opc.c: Changes based on patch from David Edelsohn
4220 <edelsohn@mhpcc.edu>.
4221 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4224 (insert_tbr): New static function.
4225 (extract_tbr): New static function.
4226 (XFXFXM_MASK, XFXM): Define.
4227 (XSPRBAT_MASK, XSPRG_MASK): Define.
4228 (powerpc_opcodes): Add instructions to access special registers by
4229 name. Add mtcr and mftbu.
4231 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4233 * mips-opc.c (P3): Define.
4234 (mips_opcodes): Add mad and madu.
4236 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4238 * configure.in: Add W65 support.
4239 * disassemble.c: Likewise.
4240 * w65-opc.h, w65-dis.c: New files.
4242 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4244 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4247 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4249 * mips-opc.c: Add dli as a synonym for li.
4251 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4253 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4254 print something for reserved opcode values, even if it won't
4257 * mips-dis.c (_print_insn_mips): When initializing, shift right
4258 and mask, to avoid sign extension problems on the Alpha.
4260 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4263 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4265 * sh-opc.h (mov.l gbr): Get direction right.
4266 * sh-dis.c (print_insn_shx): New function.
4267 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4268 print opcodes with right byte order.
4270 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4272 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4273 to avoid conflicts with getopt.
4275 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4277 * hppa-dis.c (print_insn_hppa): Read the instruction using
4278 bfd_getb32, so that it works on a little endian or 64 bit host.
4279 Remove unused local variable op.
4281 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4283 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4284 addu does not work correctly if -mips3.
4286 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4288 * a29k-dis.c (print_special): Add special register names defined
4289 on 29030, 29040 and 29050.
4290 (print_insn): Handle new operand type 'I'.
4292 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4294 * Makefile.in (INSTALL): Use top level install.sh script.
4296 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4298 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4299 that it works on a little endian host.
4301 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4303 * configure.in: Use ${config_shell} when running config.bfd.
4305 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4307 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4309 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4311 * a29k-dis.c (print_insn): Print the opcode.
4313 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4315 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4317 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4319 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4321 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4323 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4324 which store a value into memory.
4326 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4328 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4329 * arm-dis.c, arm-opc.h: New files.
4331 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4333 * Makefile.in (ns32k-dis.o): Add dependency.
4334 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4335 string, not as array of chars.
4337 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4339 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4341 * sparc-opc.c: Added sparclite extended FP operations, and
4342 versions of v9 impdep* instructions permitting specification of
4345 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4347 * i960-dis.c (reg_names): Now const.
4348 (struct sparse_tabent): New type, copied from array type in mem
4350 (ctrl): Local static array ctrl_tab now const.
4351 (cobr): Local static array cobr_tab now const.
4352 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4353 static variable mem_tab no longer explicitly initialized. Changed
4354 mem_init to const array of struct sparse_tabent.
4355 (reg): Local static variable reg_tab no longer explicitly
4356 initialized. Changed reg_init to const array of struct
4358 (ea): Local static array scale_tab now const.
4360 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4363 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4365 * configure.bat: the disassember needs to be enabled for
4366 "objdump -d" to work in djgpp.
4368 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4370 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4371 (invalid_float): Enabled general version, doesn't require running
4372 on ns32k host. Changed to take char* argument, and test for
4373 explicitly specified sizes, instead of using sizeof() on host CPU
4375 (INVALID_FLOAT): Cast first argument.
4376 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4377 list_P032, list_M032): Now const.
4378 (optlist, list_search): Made appropriate arguments now point to
4380 (print_insn_arg): Changed static array of one-character-string
4381 pointers into a static const array of characters; fixed sprintf
4382 statement accordingly.
4384 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4386 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4387 from distribution. A ns32k-dis.c from a previous distribution has
4388 been brought up to date and supports the new interface.
4390 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4392 * configure.in: add bfd_ns32k_arch target support.
4394 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4395 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4397 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4399 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4402 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4404 * h8300-dis.c, mips-dis.c: Don't use true and false.
4406 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4408 * configure.in: Change --with-targets to --enable-targets.
4410 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4412 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4413 opcodes to the first instruction with that opcode, to speed
4414 disassembly of large files. From ralphc@pyramid.com (Ralph
4417 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4419 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4421 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4423 * configure.bat: update to latest makefile.in
4425 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4427 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4428 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4429 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4430 slot insn is in a delay slot.
4431 * z8k-opc.h: (resflg): Fix patterns.
4432 * h8500-opc.h Fix CR insn patterns.
4434 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4436 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4437 "cmpl" before POWER versions, so that gas -many uses them.
4439 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4441 * disassemble.c: New file.
4442 * Makefile.in (OFILES): Add disassemble.o.
4443 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4444 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4445 binutils/configure.in.
4447 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4448 opcode being examined.
4450 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4452 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4453 (insert_ral, insert_ram, insert_ras): New functions.
4454 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4455 RAS for store with update.
4457 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4459 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4460 (edelsohn@npac.syr.edu).
4462 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4464 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4467 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4469 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4471 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4473 * ppc-opc.c (powerpc_operands): The signedp field has been
4474 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4475 instead. Add new operand SISIGNOPT.
4476 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4477 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4478 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4481 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4483 * i386-dis.c (struct private): Renamed to dis_private. `private'
4484 is a reserved word for dynix cc.
4486 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4488 * configure.in: Change error message to refer to bfd/config.bfd
4489 rather than bfd/configure.in.
4491 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4493 * ppc-opc.c: Define POWER2 as short alias flag.
4494 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4497 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4499 * i960-dis.c (print_insn_i960): Don't read a second word for
4500 opcodes 0, 1, 2 and 3.
4502 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4504 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4506 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4508 * m68881-ext.c: Removed; no longer used.
4509 * Makefile.in: Changed accordingly.
4511 * m68k-dis.c (ext_format_68881): Don't declare.
4512 (print_insn_m68k): If an instruction uses place 'i', it uses at
4513 least four fixed bytes.
4514 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4515 extended float, convert to double using floatformat_to_double, not
4516 ieee_extended_to_double, and fetch the data before converting it.
4518 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4520 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4521 davidj@ICSI.Berkeley.EDU (David Johnson).
4523 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4525 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4526 PowerPC uses bdnz[l][a].
4528 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4530 * dis-buf.c, i386-dis.c: Include sysdep.h.
4532 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4534 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4536 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4537 by Motorola PowerPC 601 with PPC_OPCODE_601.
4538 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4539 Disassemble Motorola PowerPC 601 instructions as well as normal
4540 PowerPC instructions.
4542 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4544 * i960-dis.c (reg, mem): Just use a static array instead of
4547 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4549 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4550 condition name index if this is for a negated condition.
4552 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4553 Floating point format for 'H' operand is backwards from normal
4554 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4555 operands (fmpyadd and fmpysub), handle bizarre register
4556 translation correctly for single precision format.
4558 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4559 or 'I' operands if the next format specifier is 'M' (fcmp
4560 condition completer).
4562 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4565 single number giving a bitmask for the MB and ME fields of an M
4566 form instruction. Change NB to accept 32, and turn it into 0;
4567 also turn 0 into 32 when disassembling. Seperated SH from NB.
4568 (insert_mbe, extract_mbe): New functions.
4569 (insert_nb, extract_nb): New functions.
4570 (SC_MASK): Mask out SA and LK bits.
4571 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4572 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4573 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4574 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4575 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4576 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4577 (powerpc_macros): Define table of macro definitions.
4578 (powerpc_num_macros): Define.
4580 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4581 if PPC_OPERAND_NEXT is set.
4583 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4586 char. Retrieve contents using bfd_getl32 instead of shifting.
4588 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4590 * ppc-opc.c: New file. Opcode table for PowerPC, including
4591 opcodes for POWER (RS/6000).
4592 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4593 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4594 (CFILES): Add ppc-dis.c.
4595 (ppc-dis.o, ppc-opc.o): New targets.
4596 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4598 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4600 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4601 No space before 'u', 'f', or 'N'.
4603 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4605 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4606 farther than we should.
4608 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4610 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4612 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4614 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4616 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4617 needs it, to prevent reading past the end of a section.
4619 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4621 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4622 Removed t,A case for la; always use t,A(b) case.
4624 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4626 From Ted Lemen <mellon@pepper.ncd.com>
4627 * mips-dis.c (print_insn_arg): Handle 'k'.
4628 * mips-opc.c: Make cache use k, not t.
4630 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4632 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4633 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4634 FLOAT_FORMAT_CODE to put out floating point register names.
4636 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4638 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4640 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4642 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4644 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4646 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4647 larger than 32. Moved dsxx32 variants first for disassembler.
4649 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4651 * z8kgen.c, z8k-opc.h: Add full lda information.
4653 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4655 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4656 movb instructions. Any necessary space will be emitted by
4657 the code to handle nullification completers.
4659 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4661 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4663 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4665 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4666 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4668 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4670 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4672 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4674 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4675 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4677 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4679 * m88k-dis.c (m88kdis): comment change. Remove space after
4681 (printop): handle new arg types DEC and XREG for m88110.
4683 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4685 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4686 type for absolute branch addresses. Delete special
4687 "ble" and "be" code in 'W' operand code.
4689 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4691 * mips-opc.c: Set hazard information correctly for branch
4692 likely instructions.
4694 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4696 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4697 info->fprintf_func for printing and info->print_address_func for
4700 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4702 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4704 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4706 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4707 Corrected second case of "b" for disassembler.
4709 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4711 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4712 to BFD swapping routines to correspond to BFD name changes.
4714 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * mips-opc.c: Change div machine instruction to be z,s,t rather
4717 than s,t. Change div macro to be d,v,t rather than d,s,t.
4718 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4719 rem and remu which generates only the corresponding div
4720 instruction. This is for compatibility with the MIPS assembler,
4721 which only generates the simple machine instruction when an
4722 explicit destination of $0 is used.
4723 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4725 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4727 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4728 WR_31 hazard for bal, bgezal, bltzal.
4730 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4732 * hppa-dis.c (print_insn_hppa): Use print function
4733 from within the disassemble_info, not fprintf_filtered.
4735 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4737 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4738 Law, law@cs.utah.edu.)
4740 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4742 * mips-opc.c ("absu"): Removed.
4745 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4747 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4748 Changed hazard information to distinguish between memory load
4749 delays and coprocessor load delays.
4751 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4753 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4755 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4757 * configure.in: Don't pass cpu to config.bfd.
4759 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4761 * m88k-dis.c (m88kdis): Make class unsigned.
4763 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4765 * alpha-dis.c (print_insn_alpha): One branch format case was
4766 missing the instruction name.
4768 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4770 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4771 Add the arch-specific auxiliary files.
4772 (OFILES): Remove the arch-specific auxiliary files
4773 and use BFD_MACHINES instead of DIS_LIBS.
4774 * configure.in: Set BFD_MACHINES based on --with-targets option.
4776 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4781 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4783 * sparc-opc.c: Change CONST to const to deal with gcc
4784 -Dconst=__const -traditional.
4786 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4788 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4789 coprocessor instructions out of #if 0, and made them use new
4792 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4794 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4796 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4798 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4799 instruction, for use by the disassembler.
4801 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4802 hand-coded sign extensions that depended on 32-bit host ints.
4803 FIXME, we still depend on big-endian host bitfield ordering.
4804 (sparc_print_insn): Set the insn_info_valid field, and the
4805 other fields that describe the instruction being printed.
4807 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4809 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4810 `jmp' instead of just one of them.
4812 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4814 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4815 (fput_fp_reg_r): Renamed from fput_reg_r.
4816 (fput_fp_reg): New function.
4817 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4819 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4821 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4823 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4825 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4827 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4828 don't output a space.
4830 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4832 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4834 * mips-opc.c: New file, containing opcode table from
4835 ../include/opcode/mips.h.
4836 * Makefile.in: Add it.
4838 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4840 * m88k-dis.c: New file, moved in from gdb and changed to use the
4841 new dis-asm.h disassembler interface.
4842 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4843 (m88k-dis.o): New target.
4845 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4847 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4848 argument string const char * to correspond to opcode/mips.h.
4850 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4852 * mips-dis.c: Updated to account for name changes in new version
4854 * Makefile.in: Added header file dependencies.
4856 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4858 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4860 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4862 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4863 extend, rather than shifts.
4865 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4867 * Makefile.in: Undo 15 June change.
4869 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4871 * m68k-dis.c (print_insn_arg): Change return value to byte count
4873 * m68k-dis.c: Re-write to detect invalid operands before
4874 printing anything, so we can handle this the same way we
4875 handle invalid opcodes.
4877 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4879 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4881 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4883 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4886 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4888 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4890 * configure.in: Do make sysdep.h link.
4891 * Makefile.in: Search ../include. Don't search ../bfd.
4893 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4895 Changes from Jeff Law, law@cs.utah.edu:
4896 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4897 Do not print a space before the completers specified by
4900 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4902 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4903 defined, since gdb has been fixed.
4905 Changes from Jeff Law, law@cs.utah.edu:
4906 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4907 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4908 be a *disassemble_info, not a *FILE.
4909 * hppa-dis.c: Support 'd', '!', and 'a'.
4910 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4911 * hppa-dis.c: Delete cases which are no longer needed.
4913 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4915 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4917 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4919 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4922 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4924 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4925 * configure.in: No longer need to configure to get sysdep.h.
4927 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4929 * Patches from Jeffrey Law <law@cs.utah.edu>.
4930 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4931 templates for 1.1 FP computational instructions.
4933 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4935 * h8500-dis.c (print_insn_h8500): Address argument is type
4937 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4940 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4941 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4943 * sparc-dis.c (compare_opcodes): Move static declaration to
4946 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4948 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4949 instruction, remove unimp hack from 'l' argument.
4951 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4953 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4956 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4958 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4959 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4962 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4964 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4965 arrays of string pointers to 2-d arrays of chars, to save
4968 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4970 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4971 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4973 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4975 * hppa-dis.c: New file from Utah, adapted to new disassembler
4977 * Makefile.in: Include it.
4979 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4981 * sh-dis.c, sh-opc.h: New files.
4983 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4985 * alpha-dis.c, alpha-opc.h: New files.
4987 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4989 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4992 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4994 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4996 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4998 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5001 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5003 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5004 and double percent signs a few places.
5006 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5008 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5009 Use info->print_address_func not print_address.
5011 * dis-buf.c (generic_print_address): New function.
5013 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5015 * Makefile.in: Add sparc-dis.c.
5016 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5018 Add `add' instruction to the set that get checked
5019 for a preceding `sethi' in order to print an absolute address.
5020 * (print_insn): Disassembly prefers real instructions.
5021 (is_delayed_branch): Speed up.
5022 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5023 Still missing some float ops, and needs testing.
5024 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5025 F_ALIAS. Use printf, not fprintf, when not passing a file
5027 (compare_opcodes): Check that identical instructions have
5028 identical opcodes, complain otherwise.
5031 * Include reg_names.
5033 Use dis-asm.h/read_memory_func interface.
5035 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5037 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5038 deliberately return non-zero to setjmp from longjmp. Otherwise
5039 this code fails to compile.
5041 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5043 * m68k-dis.c: Fix prototype for fetch_arg().
5045 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5047 * dis-buf.c: New file, for new read_memory_func interface.
5048 Makefile.in (OFILES): Include it.
5049 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5050 Use new read_memory_func interface.
5052 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5054 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5055 * h8500-opc.h: Fix couple of opcodes.
5057 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5059 * Makefile.in: add dvi & installcheck targets
5061 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5063 * Makefile.in: Update for h8500-dis.c.
5065 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5067 * h8500-dis.c, h8500-opc.h: New files
5069 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5071 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5072 ../include/dis-asm.h.
5073 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5074 and ../gdb/m68k-pinsn.c).
5075 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5076 and ../gdb/i386-pinsn.c).
5077 * m68881-ext.c: New file. Moved definition of
5078 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5079 * Makefile.in: Adjust for new files.
5080 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5081 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5082 can be dis-assembled.
5084 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5086 * mips-dis.c (print_insn_arg): Now returns void.
5088 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5090 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5091 files that use the macros.
5093 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5095 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5096 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5097 (CFILES): Added mips-dis.c.
5099 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5101 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5102 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5104 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5106 * Makefile.in: Improve *clean rules.
5107 * configure.in: Allow a default host.
5109 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5111 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5112 files include other sysdep files
5114 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5116 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5118 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5120 * configure.in: For host support, use ../bfd/configure.host
5121 so it stays in sync with the ../bfd/hosts database.
5123 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5125 * configure.in: use cpu-vendor-os triple instead of nested cases
5127 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5129 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5130 *always* the wrong one.
5132 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5134 * z8kgen.c: added copyright info
5136 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5138 * z8k-dis.c (unparse_instr): prettier tabs
5139 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5141 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5143 * configure.in: Add ncr* configuration.
5144 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5145 picayune ANSI compilers happy.
5147 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5149 * configure.in (i386): Make i386 and i486 synonymous for now.
5150 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5152 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5154 * Makefile.in (install): Fix typo.
5156 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5158 * Makefile.in (make): Remove obsolete crud.
5159 (sparc-opc.o): Avoid Sun Make VPATH bug.
5161 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5163 * Makefile.in: since there are no SUBDIRS, remove rule and
5164 references of subdir_do.
5166 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5168 * Makefile.in (install): Get the library name right here too.
5169 Don't install bfd.h, since it's unrelated to this library. No
5170 subdirs to recurse into, either.
5171 (CFILES): The source file has a .c suffix, not .o.
5173 * sparc-opc.c: New file, moved from BFD.
5174 * Makefile.in (OFILES): Build it.
5176 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5178 * z8k-dis.c: fixed forward refferences of some declarations.
5180 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5182 * Makefile.in: get the name of the library right
5184 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5186 * z8k-dis.c: knows how to disassemble z8k stuff
5187 * z8k-opc.h: new file full of z8000 opcodes
5191 version-control: never
projects / platform / upstream / binutils.git / blob