1 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
3 * cgen-opc.c: #include <ctype.h>.
4 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
5 Handle case insensitive hashing.
6 (hash_keyword_value): Change type of `value' to unsigned int.
8 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
10 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
11 precision FP, mark it as such. Likewise for double precision
12 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
15 (mips_builtin_opcodes): Remove non-existant r5900 instructions
19 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
21 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
22 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
25 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
27 * ppc-opc.c (extract_nsi): make unsigned expression signed before
29 (UNUSED): remove one level of parens, so MSVC doesn't choke on
30 nesting depth when all the macros are expanded.
32 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
34 * sparc-opc.c: The fcmp v9a instructions take an integer register
35 as a destination, not a floating point register. From Christian
36 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
38 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
40 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
41 syntax. From Roman Hodek
42 <rnhodek@faui22c.informatik.uni-erlangen.de>.
44 * i386-dis.c (twobyte_has_modrm): Fix pand.
46 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
48 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
50 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
52 * arm-dis.c: Add prototypes for arm_decode_shift and
55 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
57 * mips-opc.c: Add r3900 insns.
59 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
61 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
62 print delay slot instructions on the same line. When using a PC
63 relative load, add a comment with the value being loaded if it can
66 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
68 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
69 to pushS/popS for segment regs and byte constant so that
70 pushw/popw printed when in 16 bit data mode.
72 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
73 print cbtw, cwtd in 16 bit data mode.
74 * i386-dis.c (putop): extra case W to support above.
76 * i386-dis.c (print_insn_x86): print addr32 prefix when given
77 address size prefix in 16 bit address mode.
79 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
81 * sh-dis.c: Reindent. Rename local variable fprintf to
84 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
86 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
88 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
90 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
92 * mips16-opc.c (mip16_opcodes): same.
94 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
96 * m68k-opc.c (moveb): Change $d to %d.
98 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
100 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
101 (twobyte_has_modrm): Likewise.
103 (OP_MMX, OP_EM, OP_MS): New static functions.
105 * i386-dis.c: Revert patch of April 4. The output now matches
108 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
110 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
113 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
115 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
117 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
119 * Makefile.in (install): Depend upon installdirs.
120 (installdirs): New target.
122 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
124 From Thomas Graichen <graichen@rzpd.de>:
125 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
126 * configure: Rebuild.
128 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
130 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
131 Delete string{,s}.h support.
133 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
135 * cgen-asm.c (cgen_parse_operand_fn): New global.
136 (cgen_parse_{{,un}signed_integer,address}): Update call to
137 cgen_parse_operand_fn.
138 (cgen_init_parse_operand): New function.
139 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
140 from cgen_asm_init_parse.
141 (m32r_cgen_assemble_insn): New operand `errmsg'.
142 Delete call to as_bad, return error message to caller.
143 (m32r_cgen_asm_hash_keywords): #if 0 out.
145 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
147 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
149 [case 'J']: Fix typo in register name.
151 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
153 * configure.in: Substitute SHLIB_LIBS.
154 * configure: Rebuild.
155 * Makefile.in (SHLIB_LIBS): New variable.
156 ($(SHLIB)): Use $(SHLIB_LIBS).
158 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
160 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
162 * cgen-opc.c (hash_keyword_name): Improve algorithm.
164 * disassemble.c (disassembler): Handle m32r.
166 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
168 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
169 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
170 * Makefile.in (CFILES): Add them.
171 (ALL_MACHINES): Add them.
172 (dependencies): Regenerate.
173 * configure.in (cgen_files): New variable.
174 (bfd_m32r_arch): Add entry.
175 * configure: Regenerate.
177 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
179 * configure.in: Correct file names for bfd_mn10[23]00_arch.
180 * configure: Rebuild.
182 * Makefile.in: Rebuild dependencies.
184 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
186 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
189 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
191 * Branched binutils 2.8.
193 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
195 * m10200-dis.c: Rename from mn10200-dis.c.
196 * m10200-opc.c: Rename from mn10200-opc.c.
197 * m10300-dis.c: Rename from mn10300-dis.c
198 * m10300-opc.c: Rename from mn10300-opc.c.
199 * Makefile.in: Update accordingly.
201 * mips16-opc.c: Add mul and dmul macros.
203 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
205 * makefile.vms: Update CFLAGS, add clean target.
207 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
209 * mips-opc.c: Add "wait". From Ralf Baechle
210 <ralf@gnu.ai.mit.edu>.
212 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
213 * configure, config.in: Rebuild.
214 * sysdep.h: Include <stdlib.h> if it exists.
215 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
217 * Makefile.in: Rebuild dependencies.
219 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
221 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
222 Andrew Bray <andy@madhouse.demon.co.uk>.
224 * mips-opc.c: Add cast when setting mips_opcodes.
227 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
229 * v850-dis.c (disassemble): Fix sign extension problem.
230 * v850-opc.c (extract_d*): Fix sign extension problems to make
231 disassembly calculate branch offsets correctly.
234 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
236 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
238 * mips-opc.c: Add dctr and dctw.
241 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
243 * d30v-dis.c (print_insn): Change the way signed constants
246 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
248 * Makefile.in (BFD_H): New variable.
249 (HFILES): New variable.
250 (CFILES): Add all C files.
251 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
252 Delete old dependencies, and build new ones.
253 * dep-in.sed: New file.
255 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
257 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
259 start-sanitize-coldfire
260 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
262 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
265 end-sanitize-coldfire
266 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
268 * mn10200-opc.c: Change "trap" to "syscall".
269 * mn10300-opc.c: Add new "syscall" instruction.
271 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
273 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
274 mulul insns on the coldfire.
276 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
278 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
279 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
280 (print_insn_little_arm): Likewise.
282 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
284 Based on patches from H.J. Lu <hjl@lucon.org>:
285 * i386-dis.c (fetch_data): Add prototype.
286 * m68k-dis.c (fetch_data): Add prototype.
287 (dummy_print_address): Add prototype. Make static.
288 * ppc-opc.c (valid_bo): Add prototype.
289 * sparc-dis.c (build_hash_table): Add prototype.
290 (is_delayed_branch, compute_arch_mask): Add prototypes.
291 (print_insn_sparc): Make several local variables const.
292 (compare_opcodes): Change arguments to const PTR. Add prototype.
293 * sparc-opc.c (arg): Change name field to be const.
294 (lookup_name, lookup_value): Add prototypes. Change table and
295 name parameters to be const.
296 (sparc_encode_asi): Change name parameter to be const.
297 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
298 (sparc_encode_sparclet_cpreg): Likewise.
299 (sparc_decode_asi): Change return type to be const.
300 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
301 (sparc_decode_sparclet_cpreg): Likewise.
303 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
305 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
306 Solaris doesn't like the combined options, and the -f is
308 (stamp-tshlink, install): Likewise.
310 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
312 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
315 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
317 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
319 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
321 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
324 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
326 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
329 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
331 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
333 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
335 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
338 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
340 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
341 floatformat_to_double to make portable.
342 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
345 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
347 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
348 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
350 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
352 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
353 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
356 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
358 * tic80-opc.c (LSI_SCALED): Renamed from this ...
359 (OFF_SL_BR_SCALED): ... to this, and added the flag
360 TIC80_OPERAND_BASEREL to the flags word.
361 (tic80_opcodes): Replace all occurances of LSI_SCALED with
365 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
367 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
368 Change mips_opcodes from const array to a pointer,
369 and change bfd_mips_num_opcodes from const int to int,
370 so that we can increase the size of the mips opcodes table
374 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
376 * tic80-opc.c (tic80_predefined_symbols): Revert change to
377 store BITNUM values in the table in one's complement form
378 to match behavior when assembler is given a raw numeric
379 value for a BITNUM operand.
380 * tic80-dis.c (print_operand_bitnum): Ditto.
384 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
386 * d30v-opc.c: Removed references to FLAG_X.
389 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
391 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
394 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
396 * Makefile.in: Added d30v object files.
397 * configure: (bfd_d30v_arch) Rebuilt.
398 * configure.in: (bfd_d30v_arch) Added new case.
399 * d30v-dis.c: New file.
400 * d30v-opc.c: New file.
401 * disassemble.c (disassembler) Add entry for d30v.
405 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
407 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
408 representations for the floating point BITNUM values.
410 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
412 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
413 in the table in one's complement form, as they appear in the
415 (tic80_symbol_to_value): Use macros to access predefined
417 (tic80_value_to_symbol): Ditto.
418 (tic80_next_predefined_symbol): New function.
419 * tic80-dis.c (print_operand_bitnum): Remove code that did
420 one's complement for BITNUM values.
424 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
426 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
429 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
431 * makefile.vms: Remove 8 bit characters. Update to latest
434 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
436 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
438 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
440 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
441 (IMM24_PCREL): Likewise.
443 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
445 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
446 address for an extended PC relative instruction that is not a
449 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
451 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
455 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
457 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
458 (tic80_opcodes): Sort entries so that long immediate forms
459 come after short immediate forms, making it easier for
460 assembler to select the right one for a given operand.
463 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
465 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
467 (print_insn_mips16): Likewise.
470 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
472 * mips-opc.c: add r5900.
476 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
478 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
479 a symbol class that restricts translation to just that
480 class (general register, condition code, etc).
482 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
484 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
485 and REG_DEST_E for register operands that have to be
486 an even numbered register. Add REG_FPA for operands that
487 are one of the floating point accumulator registers.
488 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
489 (tic80_opcodes): Change entries that need even numbered
490 register operands to use the new operand table entries.
491 Add "or" entries that are identical to "or.tt" entries.
494 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
496 * mips16-opc.c: Add new cases of exit instruction for
498 * mips-dis.c (print_mips16_insn_arg): Display floating point
499 registers in operands of exit instruction. Print `$' before
500 register names in operands of entry and exit instructions.
503 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
505 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
506 pairs for all predefined symbols recognized by the assembler.
507 Also used by the disassembling routines.
508 (tic80_symbol_to_value): New function.
509 (tic80_value_to_symbol): New function.
510 * tic80-dis.c (print_operand_control_register,
511 print_operand_condition_code, print_operand_bitnum):
512 Remove private tables and use tic80_value_to_symbol function.
515 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
517 * d10v-dis.c (print_operand): Change address printing
518 to correctly handle PC wrapping. Fixes PR11490.
520 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
522 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
525 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
527 * mips-dis.c (print_insn_mips16): Set insn_info information.
528 (print_mips16_insn_arg): Likewise.
530 * mips-dis.c (print_insn_mips16): Better handling of an extend
531 opcode followed by an instruction which can not be extended.
533 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
535 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
536 coldfire moveb instruction to not allow an address register as
537 destination. Although the documentation does not indicate that
538 this is invalid, experiments uncovered unexpected behavior.
539 Added a comment explaining the situation. Thanks to Andreas
540 Schwab for pointing this out to me.
543 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
545 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
546 entries are presorted so that entries with the same mnemonic are
547 adjacent to each other in the table. Sort the entries for each
548 instruction so that this is true.
551 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
553 * m68k-dis.c: Include <libiberty.h>.
554 (print_insn_m68k): Sort the opcode table on the most significant
555 nibble of the opcode.
558 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
560 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
561 "vsub", "vst", "xnor", and "xor" instructions.
562 (V_a1): Renamed from V_a, msb of accumulator reg number.
563 (V_a0): Add macro, lsb of accumulator reg number.
565 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
567 * tic80-dis.c (print_insn_tic80): Broke excessively long
568 function up into several smaller ones and arranged for
569 the instruction printing function to be callable recursively
570 to print vector instructions that have both a load and a
571 math instruction packed into a single opcode.
572 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
573 to explain why it comes after the other vector opcodes.
576 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
578 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
579 move insns to handle immediate operands.
581 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
583 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
584 fix operand mask in the "moveml" entries for the coldfire.
587 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
589 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
590 New macros for building vector instruction opcodes.
591 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
592 FMT_LI, which were unused. The field is now a flags field.
593 Remove some opcodes that are possible, but illegal, such
594 as long immediate instructions with doubles for immediate
595 values. Add "vadd" and "vld" instructions.
597 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
599 * tic80-opc.c (tic80_operands): Reorder some table entries to make
600 the order more logical. Move the shift alias instructions ("rotl",
601 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
602 interspersed with the regular sr.x and sl.x instructions. Add
603 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
604 "sub", "subu", "swcr", and "trap".
606 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
608 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
609 (OFF_SL_PC): Renamed from OFF_SL.
610 (OFF_SS_BR): New operand type for base relative operand.
611 (OFF_SL_BR): New operand type for base relative operand.
612 (REG_BASE): New operand type for base register operand.
613 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
614 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
615 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
617 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
618 10 char field, padded with spaces on rhs, rather than a string
619 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
620 than old TIC80_OPERAND_RELATIVE. Add support for new
621 TIC80_OPERAND_BASEREL flag bit.
623 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
625 * tic80-dis.c (print_insn_tic80): Print floating point operands
627 * tic80-opc.c (SPFI): Add single precision floating point
628 immediate operand type.
629 (ROTATE): Add rotate operand type for shifts.
630 (ENDMASK): Add for shifts.
631 (n): Macro for the 'n' bit.
632 (i): Macro for the 'i' bit.
633 (PD): Macro for the 'PD' field.
634 (P2): Macro for the 'P2' field.
635 (P1): Macro for the 'P1' field.
636 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
640 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
642 * mn10200-dis.c (disassemble): Mask off unwanted bits after
643 adding in current address for pc-relative operands.
646 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
648 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
649 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
650 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
651 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
652 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
653 REG_BASE_M_SI, REG_BASE_M_LI respectively.
654 (REG_SCALED, LSI_SCALED): New operand types.
655 (E): New macro for 'E' bit at bit 27.
656 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
657 opcodes, including the various size flavors (b,h,w,d) for
658 the direct load and store instructions.
660 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
662 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
664 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
665 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
666 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
667 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
668 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
669 masks with "MASK_* & ~M_*" to get the M bit reset.
670 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
672 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
674 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
675 correctly. Add support for printing TIC80_OPERAND_BITNUM and
676 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
678 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
679 CC, SICR, and LICR table entries.
680 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
681 "bcnd", and "brcr" opcodes.
684 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
686 * ppc-opc.c (powerpc_operands): Make comment match the
687 actual fields (no shift field).
688 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
690 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
691 partial implementation, work in progress.
692 * tic80-opc.c (tic80_operands): Begin construction operands table.
693 (tic80_opcodes): Continue populating opcodes table and start
694 filling in the operand indices.
695 (tic80_num_opcodes): Add this.
698 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
700 * m68k-opc.c: Add #B case for moveq.
702 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
704 * mn10300-dis.c (disassemble): Make sure all variables are initialized
705 before they are used.
708 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
710 * v850-opc.c (v850_opcodes): Put curly-braces around operands
711 for "breakpoint" instruction.
714 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
716 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
717 (dep): Use ALL_CFLAGS rather than CFLAGS.
720 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
722 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
726 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
728 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
730 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
733 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
735 * mips16-opc.c: Add "abs".
738 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
740 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
741 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
742 (disassembler): Add bfd_arch_tic80 support to set disassemble
744 * tic80-dis.c (print_insn_tic80): Add stub.
746 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
748 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
749 * configure: Regenerate with autoconf.
750 * tic80-dis.c: Add file.
751 * tic80-opc.c: Add file.
754 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
756 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
758 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
760 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
761 (mn10200_opcodes): Use it for some logicals and btst insns.
762 Add "break" and "trap" instructions.
764 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
766 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
768 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
770 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
771 relative load or add now depends upon whether the instruction is
774 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
776 * mn10200-dis.c: Finish writing disassembler.
777 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
778 Fix mask for "jmp (an)".
780 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
781 handle endianness issues for mn10300.
783 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
785 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
787 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
788 instruction. Fix opcode field for "movb (imm24),dn".
790 * mn10200-opc.c (mn10200_operands): Fix insertion position
793 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
795 * mn10200-opc.c: Create mn10200 opcode table.
796 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
797 but moving along nicely.
799 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
801 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
803 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
805 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
806 specifiers for fmovem* instructions.
808 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
810 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
812 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
814 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
817 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
819 * mn10300-opc.c: Add some comments explaining the various
822 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
824 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
826 * m68k-dis.c (print_insn_arg): Handle new < and > operand
829 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
830 operand specifiers in fmovm* instructions.
832 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
834 * ppc-opc.c (insert_li): Give an error if the offset has the two
835 least significant bits set.
837 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
839 * mips-dis.c (print_insn_mips16): Separate the instruction from
840 the arguments with a tab, not a space.
842 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
844 * mn10300-dis.c (disasemble): Finish conversion to '$' as
847 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
850 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
852 * configure: Rebuild with autoconf 2.12.
854 Add support for mips16 (16 bit MIPS implementation):
855 * mips16-opc.c: New file.
856 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
857 (mips16_reg_names): New static array.
858 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
859 after seeing a 16 bit symbol.
860 (print_insn_little_mips): Likewise.
861 (print_insn_mips16): New static function.
862 (print_mips16_insn_arg): New static function.
863 * mips-opc.c: Add jalx instruction.
864 * Makefile.in (mips16-opc.o): New target.
865 * configure.in: Use mips16-opc.o for bfd_mips_arch.
866 * configure: Rebuild.
868 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
870 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
871 operand specifiers in *save, *restore and movem* instructions.
873 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
876 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
877 register operands for immediate arithmetic, not, neg, negx, and
878 set according to condition instructions.
880 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
881 specifier of the effective-address operand in immediate forms of
882 arithmetic instructions. The specifier for the immediate operand
883 notes how and where the constant will be stored.
885 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
887 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
890 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
893 * mn10300-dis.c (disassemble): Prefix registers with '%'.
895 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
897 * mn10300-dis.c (disassemble): Handle register lists.
899 * mn10300-opc.c: Fix handling of register list operand for
900 "call", "ret", and "rets" instructions.
902 * mn10300-dis.c (disassemble): Print PC-relative and memory
903 addresses symbolically if possible.
904 * mn10300-opc.c: Distinguish between absolute memory addresses,
905 pc-relative offsets & random immediates.
907 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
909 (disassemble): Handle SPLIT and EXTENDED operands.
911 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
913 * mn10300-dis.c: Rough cut at printing some operands.
915 * mn10300-dis.c: Start working on disassembler support.
916 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
918 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
920 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
922 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
924 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
926 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
928 * mn10300-opc.c (mn10300_opcodes): Demand parens around
929 register argument is calls and jmp instructions.
931 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
933 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
934 getx operand. Fix opcode for mulqu imm,dn.
936 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
938 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
939 in MN10300_OPERAND_SPLIT operands for how many bits
940 appear in the basic insn word. Add IMM32_HIGH24,
941 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
942 (mn10300_opcodes): Use new operands as needed.
944 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
945 for bset, bclr, btst instructions.
946 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
948 * mn10300-opc.c (mn10300_operands): Remove many redundant
949 operands. Update opcode table as appropriate.
950 (IMM32): Add MN10300_OPERAND_SPLIT flag.
951 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
953 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
955 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
956 operands (for indexed load/stores). Fix bitpos for DI
957 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
958 few instructions that insert immediates/displacements in the
959 middle of the instruction. Add IMM8E for 8 bit immediate in
960 the extended part of an instruction.
961 (mn10300_operands): Use new opcodes as appropriate.
963 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
965 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
966 sequential so the assembler never parallelizes it with
969 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
971 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
972 a data/address register that appears in register field 0
973 and register field 1.
974 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
976 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
978 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
979 standard disassembly.
981 * alpha-opc.c (alpha_operands): Rearrange flags slot.
982 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
983 Recategorize PALcode instructions.
986 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
988 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
991 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
993 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
994 there are no operand types.
997 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
999 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1001 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1004 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1006 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1009 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1011 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1012 and sst.w instructions.
1014 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1018 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1020 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1023 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1025 * ppc-opc.c (PPCPWR2): Define.
1026 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1029 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1031 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1032 field for movhu instruction.
1035 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1036 cast value to "long" not "signed long" to keep hpux10
1040 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1042 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1045 * mn10300-opc.c (FMT*): Remove definitions.
1047 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1048 for shift-by-register opcodes.
1050 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1051 into [AD][MN][01] for encoding the position of the register
1054 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1056 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1057 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1059 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1061 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1062 Fix various typos. Add "PAREN" operand.
1063 (MEM, MEM2): Define.
1064 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1065 operands. Fix several typos.
1067 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1070 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1072 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1073 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1075 (mn10300_opcodes): Break opcode format out into its own field.
1076 Update many operand fields to deal with signed vs unsigned
1077 issues. Fix one or two typos in the "mov" instruction
1078 opcode, mask and/or operand fields.
1080 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1082 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1083 m68851 wasn't reset.
1085 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1087 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1088 all opcodes. Very rough cut at operands for all opcodes.
1090 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1093 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1095 * mn10200-opc.c, mn10300-opc.c: New files.
1096 * mn10200-dis.c, mn10300-dis.c: New files.
1097 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1098 * disassemble.c: Break mn10x00 support into 10200 and 10300
1100 * configure.in: Likewise.
1101 * configure: Rebuilt.
1103 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1105 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1107 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1109 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1111 * disassemble (ARCH_mn10x00): Define.
1112 (disassembler): Handle bfd_arch_mn10x00.
1113 * configure.in: Recognize bfd_mn10x00_arch.
1114 * configure: Rebuilt.
1116 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1118 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1119 accordingly. Don't declare functions using op_rtn.
1122 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1124 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1125 params to be more standard.
1126 * (disassemble): Print absolute addresses and symbolic names for
1127 branch and jump targets.
1128 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1130 * (v850_opcodes): Add breakpoint insn.
1133 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1135 * m68k-opc.c: Move the fmovemx data register cases before the
1136 other cases, so that they get recognized before the data register
1137 does gets treated as a degenerate register list.
1139 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1141 * mips-opc.c: Add a case for "div" and "divu" with two registers
1142 and a destination of $0.
1144 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1146 * mips-dis.c (print_insn_arg): Add prototype.
1147 (_print_insn_mips): Ditto.
1149 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1151 * mips-dis.c (print_insn_arg): Print condition code registers as
1154 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1156 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1159 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1161 * v850-dis.c (disassemble): Make static. Provide prototype.
1163 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1165 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1168 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1170 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1171 ']' characters into the output stream.
1172 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1173 Add "memop" field to all opcodes (for the disassembler).
1174 Reorder opcodes so that "nop" comes before "mov" and "jr"
1175 comes before "jarl".
1177 * v850-dis.c (print_insn_v850): Fix typo in last change.
1179 * v850-dis.c (print_insn_v850): Properly handle disassembling
1180 a two byte insn at the end of a memory region when the memory
1181 region's size is only two byte aligned.
1183 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1185 * v850-dis.c (v850_reg_names): Define.
1186 (v850_sreg_names, v850_cc_names): Likewise.
1187 (disassemble): Very rough cut at printing operands (unformatted).
1189 * v850-opc.c (BOP_MASK): Fix.
1190 (v850_opcodes): Fix mask for jarl and jr.
1192 * v850-dis.c: New file. Skeleton for disassembler support.
1193 * Makefile.in Remove v850 references, they're not needed here
1194 and they weren't being sanitized away.
1195 * configure.in: Add v850-dis.o when building v850 toolchains.
1196 * configure: Rebuilt.
1197 * disassemble.c (disassembler): Call v850 disassembler.
1199 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1200 (insert_d8_6, extract_d8_6): New functions.
1201 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1202 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1204 (IF4A, IF4B): Use "D7" instead of "D7S".
1205 (IF4C, IF4D): Use "D8_7" instead of "D8".
1206 (IF4E, IF4F): New. Use "D8_6".
1207 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1208 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1210 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1211 (v850_operands): Change D16 to D16_15, use special insert/extract
1212 routines. New new D16 that uses the generic insert/extract code.
1213 (IF7A, IF7B): Use D16_15.
1214 (IF7C, IF7D): New. Use D16.
1215 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1217 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1218 message. Issue an error if the branch offset is odd.
1220 * v850-opc.c: Add notes about needing special insert/extract
1221 for all the load/store insns, except "ld.b" and "st.b".
1223 * v850-opc.c (insert_d22, extract_d22): New functions.
1224 (v850_operands): Use insert_d22 and extract_d22 for
1226 (insert_d9): Fix range check.
1228 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1230 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1231 and set bits field to D9 and D22 operands.
1233 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1235 * v850-opc.c (v850_operands): Define SR2 operand.
1236 (v850_opcodes): "ldsr" uses R1,SR2.
1238 * v850-opc.c (v850_opcodes): Fix opcode specs for
1239 sld.w, sst.b, sst.h, sst.w, and nop.
1241 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1243 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1244 end of the opcode table.
1247 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1249 * d10v-opc.c (pre_defined_registers): Added register pairs,
1250 "r0-r1", "r2-r3", etc.
1253 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1255 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1256 Create I16U for an unsigned 16bit mmediate operand.
1257 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1259 * v850-opc.c (v850_operands): Define EP operand.
1260 (IF4A, IF4B, IF4C, IF4D): Use EP.
1262 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1263 with immediate operand, "movhi". Tweak "ldsr".
1265 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1266 correct. Get sld.[bhw] and sst.[bhw] closer.
1268 * v850-opc.c (v850_operands): "not" is a two byte insn
1270 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1272 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1274 * v850-opc.c (two): Get order of words correct.
1276 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1278 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1279 register source and destination operands.
1280 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1282 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1283 same thinko in "trap" opcode.
1285 * v850-opc.c (v850_opcodes): Add initializer for size field
1288 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1289 Add D8 for 8-bit unsigned field in short load/store insns.
1290 (IF4A, IF4D): These both need two registers.
1291 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1292 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1293 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1294 for "ldsr" and "stsr".
1295 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1298 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1299 short store word (sst.w).
1301 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1303 * v850-opc.c (v850_operands): Added insert and extract fields,
1304 pointers to functions that handle unusual operand encodings.
1306 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1308 * v850-opc.c (v850_opcodes): Enable "trap".
1310 * v850-opc.c (v850_opcodes): Fix order of displacement
1311 and register for "set1", "clr1", "not1", and "tst1".
1313 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1315 * v850-opc.c (v850_operands): Add "B3" support.
1316 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1319 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1321 * v850-opc.c: Close unterminated comment.
1323 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1325 * v850-opc.c (v850_operands): Add flags field.
1326 (v850_opcodes): add move opcodes.
1328 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1330 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1331 * configure: (bfd_v850v_arch) Add new case.
1332 * configure.in: (bfd_v850_arch) Add new case.
1333 * v850-opc.c: New file.
1336 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1338 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1340 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1342 * d10v-opc.c: Add additional information to the opcode
1343 table to help determinine which instructions can be done
1346 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1348 * mpw-make.sed: Update editing of include pathnames to be
1351 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1353 * arm-opc.h: Added "bx" instruction definition.
1355 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1357 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1359 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1361 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1363 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1365 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1367 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1369 * makefile.vms: Update for alpha-opc changes.
1371 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1373 * i386-dis.c (print_insn_i386): Actually return the correct value.
1374 (ONE, OP_ONE): #ifdef out; not used.
1376 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1378 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1379 Changed subi operand type to treat 0 as 16.
1381 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1383 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1386 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1388 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1389 memory transfer instructions. Add new format string entries %h and %s.
1390 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1393 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1395 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1396 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1398 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1400 * alpha-dis.c (print_insn_alpha_osf): Remove.
1401 (print_insn_alpha_vms): Remove.
1402 (print_insn_alpha): Make globally visible. Chose the register
1403 names based on info->flavour.
1404 * disassemble.c: Always return print_insn_alpha for the alpha.
1406 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1408 * d10v-dis.c (dis_long): Handle unknown opcodes.
1410 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1412 * d10v-opc.c: Changes to support signed and unsigned numbers.
1413 All instructions with the same name that have long and short forms
1414 now end in ".l" or ".s". Divs added.
1415 * d10v-dis.c: Changes to support signed and unsigned numbers.
1417 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1419 * d10v-dis.c: Change all functions to use info->print_address_func.
1421 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1423 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1424 move ccr/sr insns more strict so that the disassembler only
1425 selects them when the addressing mode is data register.
1427 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1428 * d10v-opc.c (pre_defined_registers): Declare.
1429 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1430 to pick a better name for the registers.
1432 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1434 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1435 operands for fexpand and fpmerge. From Christian Kuehnke
1436 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1438 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1440 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1441 print routine. Take new regnames and cpumask arguments.
1442 Kill the environment variable nonsense.
1443 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1444 (print_insn_alpha_vms): New function. Do VMS style regnames.
1445 * disassemble.c (disassembler): Test bfd flavour to pick
1446 between OSF and VMS routines. Default to OSF.
1448 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1450 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1451 * configure: Rebuild.
1452 * Makefile.in (install): Use @INSTALL_SHLIB@.
1454 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1456 * configure: (bfd_d10v_arch) Add new case.
1457 * configure.in: (bfd_d10v_arch) Add new case.
1458 * d10v-dis.c: New file.
1459 * d10v-opc.c: New file.
1460 * disassemble.c (disassembler) Add entry for d10v.
1462 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1464 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1465 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1467 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1469 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1470 distinguish between variants of the instruction set.
1471 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1472 distinguish between variants of the instruction set.
1474 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1476 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1477 the 8086 instruction set.
1478 * i386-dis.c: General cleanups. Make most things static. Add
1479 prototypes. Get rid of static variables aflags and dflags. Pass
1480 them as args (to almost everything).
1482 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1484 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1486 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1488 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1489 if the next arg is marked with SRC_IN_DST. Gross.
1491 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1492 we're looking for and find EXR.
1494 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1495 if we're looking for KBIT and we don't find it.
1497 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1500 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1501 3bit immediate operands.
1503 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1505 * Released binutils 2.7.
1507 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1508 <kkaempf@progis.ac-net.de>.
1510 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1512 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1514 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1516 * sparc-dis.c (print_insn_sparclite): New routine to print
1517 sparclite instructions.
1519 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1521 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1523 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1525 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1526 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1527 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1529 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1531 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1532 Use autoconf-set values.
1533 (docdir, oldincludedir): Removed.
1534 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1536 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1538 * alpha-opc.c: New file.
1539 * alpha-opc.h: Remove.
1540 * alpha-dis.c: Complete rewrite to use new opcode table.
1541 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1542 * configure: Rebuild with autoconf 2.10.
1543 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1544 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1546 (alpha-opc.o): New target.
1548 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1550 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1551 Set imm_added_to_rs1 even if the source and destination register
1554 * sparc-opc.c: Add some two operand forms of the wr instruction.
1556 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1558 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1561 * disassemble.c (disassembler): Handle H8/S.
1562 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1564 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1566 * sparc-opc.c: Add beq/teq as aliases for be/te.
1568 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1569 <sergei@msil.sps.mot.com>.
1571 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1573 * makefile.vms: New file.
1575 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1577 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1579 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1582 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1584 * i386-dis.c (OP_OFF): Call append_prefix.
1586 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1588 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1589 unsigned long to silence a warning from the Solaris PowerPC
1592 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1594 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1596 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1598 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1600 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1601 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1602 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1603 cpush, cpusha, cpull sparclet insns.
1605 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1607 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1609 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1611 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1612 Set F_FLOAT on other floating point instructions.
1614 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1616 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1618 (powerpc_opcodes): Add 860/821 specific SPRs.
1620 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1622 * configure.in: Permit --enable-shared to specify a list of
1623 directories. Set and substitute BFD_PICLIST.
1624 * configure: Rebuild.
1625 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1626 uses. Set to @BFD_PICLIST@.
1628 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1630 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1631 not "abs", which may be needed for the absolute in something
1632 like btst #0,@10:8. Print L_3 immediates separately from other
1633 immediates. Change ABSMOV reference to ABS8MEM.
1635 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1637 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1638 (current_arch_mask): New static global.
1639 (compute_arch_mask): New static function.
1640 (print_insn_sparc): Delete sparc_v9_p. New static local
1641 current_mach. Resort opcode table if current_mach changes.
1642 Generalize "insn not supported" test.
1643 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1644 Delete test for v9/!v9.
1645 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1647 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1648 (brfcx): Renamed to FBRX.
1649 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1650 coprocessor mnemonics are not supported on the sparclet).
1651 (condf): Renamed to CONDF.
1652 (SLCBCC2): Delete F_ALIAS flag.
1654 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1656 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1657 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1659 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1661 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1662 that the shared library version number is set correctly.
1664 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1666 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1667 Miles Bader <miles@gnu.ai.mit.edu>.
1668 * configure: Rebuild.
1670 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1672 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1675 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1677 * configure: Rebuild with autoconf 2.8.
1679 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1681 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1682 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1684 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1686 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1687 since they appear as targets in Makefile.in.
1688 * configure: Rebuild.
1690 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1692 * mpw-make.sed: Edit out shared library support bits.
1694 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1696 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1697 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1698 (sparc_opcodes): Add sparclet insns.
1699 (sparclet_cpreg_table): New static local.
1700 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1701 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1703 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1705 * i386-dis.c (index16): New static variable.
1706 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1708 (OP_indirE): Return result of OP_E.
1709 (OP_E): Check for 16 bit addressing mode, and disassemble
1710 correctly. Optimised 32 bit case a little. Don't print
1711 "(base,index,scale)" when sib specifies only an offset.
1713 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1715 * configure.in: Set and substitute SHLIB_DEP.
1716 * configure: Rebuild.
1717 * Makefile.in (SHLIB_DEP): New variable.
1718 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1719 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1720 COMMON_SHLIB, add them to piclist with appropriate modifications.
1721 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1722 here: just use piclist.
1724 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1726 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1727 (print_insn_sparc): Rewrite v9/not-v9 tests.
1728 (compare_opcodes): Likewise.
1729 * sparc-opc.c (MASK_<ARCH>): Define.
1730 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1731 (sparclet,v6notv9): Define.
1732 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1733 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1735 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1737 * configure.in: Call AC_PROG_CC before configure.host.
1738 * configure: Rebuild.
1740 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1742 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1744 * i386-dis.c (onebyte_has_modrm): New static array.
1745 (twobyte_has_modrm): New static array.
1746 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1748 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1750 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1753 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1755 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1758 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1760 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1761 m68010up, not just m68020up | cpu32.
1763 * Makefile.in (SONAME): New variable.
1764 ($(SHLINK)): Make a link to the transformed name, as well.
1765 (stamp-tshlink): New target.
1766 (install): Skip stamp-tshlink during install.
1768 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1770 * configure.in: Call AC_ARG_PROGRAM.
1771 * configure: Rebuild.
1772 * Makefile.in (program_transform_name): New variable.
1773 (install): Transform library name before installing it.
1775 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1777 * i960-dis.c (mem): Add HX dcinva instruction.
1779 Support for building as a shared library, based on patches from
1780 Alan Modra <alan@spri.levels.unisa.edu.au>:
1781 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1782 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1783 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1784 * configure: Rebuild.
1785 * Makefile.in (ALLLIBS): New variable.
1786 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1787 (COMMON_SHLIB, SHLINK): New variables.
1788 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1789 (STAGESTUFF): Remove variable.
1790 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1791 (stamp-piclist, piclist): New targets.
1792 ($(SHLIB), $(SHLINK)): New targets.
1793 ($(OFILES)): Depend upon stamp-picdir.
1794 (disassemble.o): Build twice if PICFLAG is set.
1795 (MOSTLYCLEAN): Add pic/*.o.
1796 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1797 (distclean): Remove pic and stamp-picdir.
1798 (install): Install shared libraries.
1799 (stamp-picdir): New target.
1801 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1803 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1804 Print unknown instruction as "unknown", rather than in hex.
1806 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1808 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1810 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1812 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1814 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1816 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1817 when necessary. From Ulrich Drepper
1818 <drepper@myware.rz.uni-karlsruhe.de>.
1820 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1822 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1823 sparc_num_opcodes. Update architecture enum values.
1824 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1825 (sparc_opcode_lookup_arch): New function.
1826 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1827 (sparc_opcodes): Add v9a shutdown insn.
1829 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1831 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1832 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1834 (print_insn_sparc64): Deleted.
1835 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1838 * sparc-opc.c (architecture_pname): Add v9a.
1840 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1842 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1843 incorrectly defined as 0x16 when it should be 0x15.
1844 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1845 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1846 excb (exception barrier) which is defined in the Alpha
1847 Architecture Handbook version 2.
1848 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1849 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1850 disassembled as or, for example.
1852 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1854 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1855 (_print_insn_mips): Change i from int to unsigned int.
1857 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1859 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1860 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1862 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1864 * i386-dis.c: Added Pentium Pro instructions.
1866 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1868 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1871 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1873 * sh-opc.h (sh_nibble_type): Added REG_B.
1874 (sh_arg_type): Added A_REG_B.
1875 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1877 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1879 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1881 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1883 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1885 * Makefile.in (distclean): Remove stamp-h. From Ronald
1886 F. Guilmette <rfg@monkeys.com>.
1888 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1890 From David Mosberger-Tang <davidm@azstarnet.com>:
1891 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1894 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1896 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1897 (sh_table): Added many SH3 opcodes.
1898 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1900 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1902 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1903 (subco,subco.): Mark this PPC, not PPCCOM.
1905 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1907 * configure: Rebuild with autoconf 2.7.
1909 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1911 * configure: Rebuild with autoconf 2.6.
1913 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1915 * configure.in: Sort list of architectures. Accept but do nothing
1916 for alliant, convex, pyramid, romp, and tahoe.
1918 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1920 * a29k-dis.c (print_special): Change num to unsigned int.
1922 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1924 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1927 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1929 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1930 * configure: Rebuilt.
1932 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1934 * configure.in: Add case for bfd_i860_arch.
1935 * configure: Rebuild.
1937 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1939 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1940 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1941 (NEXTDOUBLE): Likewise.
1942 (print_insn_m68k): Don't match fmoveml if there is more than one
1943 register in the list.
1944 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1946 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1948 * m68k-opc.c: Use #W rather than #w.
1949 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1951 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1953 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1954 and likewise for all the dbxx opcodes.
1956 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1958 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1960 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1962 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1963 the VR4100 specific instructions to the mips_opcodes structure.
1965 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1967 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1968 ugly Metrowerks bug in CW6, is fixed in CW7.
1970 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1972 * ppc-opc.c (whole file): Add flags for common/any support.
1974 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1976 * Makefile.in (BISON): Remove macro.
1977 (FLAGS_TO_PASS): Remove BISON.
1979 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1981 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1983 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1984 instructions that take no args by looking at the match mask.
1985 (print_insn_arg): Always print "%" before register names.
1986 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1987 [case '_']: Don't print "@#" before address.
1988 [case 'J']: Use "%s" as format string, not register name.
1989 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1991 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1993 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1996 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1998 From David Mosberger-Tang <davidm@azstarnet.com>
2000 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2001 (alpha_insn_set): added definitions for VAX floating point
2002 instructions (Unix compilers don't generate these, but handcoded
2003 assembly might still use them).
2005 * alpha-dis.c (print_insn_alpha): added support for disassembling
2006 the miscellaneous instructions in the Alpha instruction set.
2008 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2010 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2011 no longer create sysdep.h, sed ppc-opc.c to work around a
2012 serious Metrowerks C bug.
2013 * mpw-make.in: Remove.
2014 * mpw-make.sed: New file, used by mpw-configure to edit
2015 Makefile.in into an MPW makefile.
2017 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2019 * Makefile.in (maintainer-clean): New synonym for realclean.
2021 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2023 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2024 which use '0', '1', and '2' instead. Specify the proper size for
2025 a pmove immediate operand. Correct the pmovefd patterns to be
2026 moves to a register, not from a register.
2027 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2029 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2031 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2032 %psr, %wim, %tbr as F_NOTV9.
2034 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2036 * Makefile.in (Makefile): Just rebuild Makefile when running
2038 (config.h, stamp-h): New targets.
2039 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2040 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2041 rebuilding config.h.
2042 * configure: Rebuild.
2044 * mips-opc.c: Change unaligned loads and stores with "t,A"
2045 operands to use "t,A(b)".
2047 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2049 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2051 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2053 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2054 until 3 instead of until 2.
2056 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2058 * Makefile.in (ALL_CFLAGS): Define.
2059 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2060 (MOSTLYCLEAN): Add config.log.
2061 (distclean): Don't remove config.log.
2062 * configure.in: Substitute HDEFINES.
2063 * configure: Rebuild.
2065 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2067 * sh-opc.h (sh_arg_type): Add F_FR0.
2068 (sh_table, case fmac): Add F_FR0 as first argument.
2070 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2072 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2074 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2076 * sparc-dis.c: Remove all references to NO_V9.
2078 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2080 * aclocal.m4: Just include ../bfd/aclocal.m4.
2081 * configure: Rebuild.
2083 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2085 * sparc-dis.c (X_DISP19): Define.
2086 (print_insn, case 'G'): Use it.
2087 (print_insn, case 'L'): Sign extend displacement.
2089 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2091 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2092 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2093 host_makefile_frag or frags.
2094 * aclocal.m4: New file.
2095 * configure: Rebuild.
2096 * Makefile.in (INSTALL): Set to @INSTALL@.
2097 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2098 (INSTALL_DATA): Set to @INSTALL_DATA@.
2100 (AR_FLAGS): Set to rc rather than qc.
2101 (CC): Define as @CC@.
2102 (CFLAGS): Set to @CFLAGS@.
2103 (@host_makefile_frag@): Remove.
2104 (config.status): Remove dependency upon @frags@.
2106 * configure.in: ../bfd/config.bfd now just sets shell variables.
2107 Use them rather than looking through target Makefile fragments.
2108 * configure: Rebuild.
2110 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2112 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2114 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2116 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2117 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2120 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2121 (lookup_{name,value}): New functions.
2122 (prefetch_table): New static local.
2123 (sparc_{encode,decode}_prefetch): New functions.
2124 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2126 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2128 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2131 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2133 * sh-dis.c: Correct comment on first line of file.
2135 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2137 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2139 * sparc-opc.c (asi, membar): New static locals.
2140 (sparc_{encode,decode}_{asi,membar}): New functions.
2141 (sparc_opcodes, membar insn): Fix.
2142 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2143 Support decoding of membar masks.
2146 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2148 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2150 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2152 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2153 and likewise for the other branches. Add bhs as an alias for bcc,
2154 and likewise for the size variants. Add dbhs as an alias for
2157 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2159 * sh-opc.h (FP sts instructions): Update to match reality.
2161 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2163 * m68k-dis.c: (fpcr_names): Add % before all register names.
2164 (reg_names): Likewise.
2165 (print_insn_arg): Don't explicitly print % before register names.
2166 Add % before register names in static array names. In case 'r',
2167 print data registers as `@(Dn)', not `Dn@'. When printing a
2168 memory address, don't print @# before it.
2169 (print_indexed): Change base_disp and outer_disp from int to
2170 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2171 syntax. Sign extend 8 byte displacement correctly.
2172 (print_base): Print using MIT syntax. Print zpc when appropriate.
2173 Change parameter disp from int to bfd_vma.
2175 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2178 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2180 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2181 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2182 * sh-opc.h (sh_arg_type): Add new operand types.
2183 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2185 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2187 * Makefile.in (distclean): Remove generated file config.h.
2189 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2191 * Makefile.in (distclean): Remove generated file config.h.
2193 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2195 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2197 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2199 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2200 rather than numopcodes. Use m68k_opcodes rather than removed
2201 opcode function. Don't check F_ALIAS.
2202 (print_insn_arg): Change first parameter to be const char *.
2203 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2204 (m68k-opc.o): New target.
2205 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2206 * configure: Rebuild.
2208 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2210 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2211 (opcode_bits, opcode_hash_table): New variables.
2212 (opcodes_initialized): Renamed from opcodes_sorted.
2213 (build_hash_table): New function.
2214 (is_delayed_branch): Use hash table.
2215 (print_insn): Renamed from print_insn_sparc, made static.
2216 Build and use hash table. If !sparc64, ignore sparc64 insns,
2217 and vice-versa if sparc64.
2218 (print_insn_sparc, print_insn_sparc64): New functions.
2219 (compare_opcodes): Move sparc64 opcodes to end.
2220 Print commutative insns with constant second.
2221 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2223 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2225 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2226 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2227 avoids printing a delay slot in a delay slot.
2228 * sh-opc.h (sh_table): Fully bracket last entry.
2230 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2232 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2234 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2236 * configure.in: Get host_makefile_frag from ${srcdir}.
2238 * configure.in: Autoconfiscated. Check for string[s].h. Create
2239 config.h from config.in. Don't set up sysdep.h link.
2240 * sysdep.h: New file.
2241 * configure, config.in: New files, generated from configure.in.
2242 * Makefile.in: Updated to be processed autoconf-style.
2243 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2244 (Makefile): Depend on config.status.
2245 (config.status): New rule.
2246 * configure.bat: Update Makefile substitutions.
2248 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2250 * mips-opc.c (L1): Define.
2251 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2252 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2255 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2257 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2258 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2259 have multiple add units but only a single logical unit.
2261 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2262 shifted by 18, without any insertion or extraction function.
2263 (insert_cr, extract_cr): Remove.
2266 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2268 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2271 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2273 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2276 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2278 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2279 * sh-opc.h: Add copyright.
2281 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2283 * Makefile.in (crunch-m68k): Delete extra target accidentally
2284 checked in a while ago.
2286 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2288 * sh-opc.h (sh_table): Add SH3 support.
2290 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2292 * sh-opc.h: Added bsrf and braf.
2294 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2296 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2297 bogus [ls]fm{ea,fd} patterns.
2299 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2300 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2301 initialize it from memory. Make function static.
2302 (print_insn_{big,little}_arm): New functions.
2303 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2304 the correct endianness.
2307 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2309 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2310 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2313 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2315 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2318 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2320 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2321 17th, so that it builds again using GCC as the compiler.
2323 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2325 * mips-dis.c (print_insn_little_mips): Cast return value from
2326 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2327 expects an unsigned long, and that might be fewer words of
2328 argument storage (e.g., if bfd_vma is long long on a 32-bit
2330 (print_insn_big_mips): Likewise with bfd_getb32 value.
2331 (_print_insn_mips): Now static.
2333 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2335 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2336 gcc memory hog problem with initializer is fixed.
2339 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2341 * arc-opc.c (NULL): Define.
2342 (arc_operands, insn fields u,s): Delete.
2343 (arc_operands, insn fields a,b,c): Mark as signed.
2344 (arc_opcodes): No longer const, links computed at run-time.
2345 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2346 suffixes that affect the insn code.
2347 (arc_opcodes): Resort table to macros are first.
2348 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2349 (arc_opcodes, st [b] entry): Likewise.
2350 (arc_opcodes, st [b,d] entry): Fix mask, value.
2351 (arc_reg_names): Add entries for r29, r30, r31, r60.
2352 (opcode_map, icode_map): New static globals.
2353 (arc_opcode_init_tables): Initialize them.
2354 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2355 (insert_shimmoffset): Signal error if register present.
2357 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2360 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2362 Merge in support for Mac MPW as a host.
2363 (Old change descriptions retained for informational value.)
2365 * mpw-config.in (archname): Compute from the config.
2366 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2368 * mpw-config.in (target_arch): Compute from canonical target.
2369 (m68k, mips, powerpc, sparc): Add architectures.
2370 * mpw-make.in (disassemble.c.o): Add.
2371 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2373 * mpw-config.in (BFD_MACHINES): Set to a default value.
2374 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2376 * mpw-make.in (CSEARCH): Add extra-include to search path.
2378 * mpw-config.in (varargs.h): Don't create.
2379 (sysdep.h): Create using forward-include.
2380 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2382 * mpw-config.in: New file, MPW version of configure.in.
2383 * mpw-make.in: New file, MPW version of Makefile.in.
2386 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2388 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2389 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2390 (print_insn_*): Pass bfd mach number, not opcode version.
2391 * arc-opc.c (arc_get_opcode_mach): New function.
2394 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2396 * alpha-dis.c (print_insn_alpha): Put empty statement after
2399 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2401 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2402 (low_sign_extend): Likewise.
2403 (get_field): Delete unused function.
2404 (set_field, deposit_14, deposit_21): Likewise.
2406 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2408 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2411 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2413 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2415 * alpha-opc.h (OSF_ASMCODE): define
2416 print pal-code names as defined in App C of the
2417 Alpha Architecture Reference Manual
2419 * alpha-dis.c: cleaned up output
2420 print stylized code forms as defined in App A.4.3 of the
2421 Alpha Architecture Reference Manual
2423 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2425 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2427 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2430 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2432 * m68k-dis.c (opcode): New function. Returns address of opcode
2433 table entry given index, even if the opcode table was split to
2434 work around gcc bugs.
2435 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2437 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2438 (reg_names): Now const.
2439 (print_insn_arg): Arrays cacheFieldName and names now const.
2440 (print_indexed): Array scales now const.
2443 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2445 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2446 (print_insn_arc_{host,graphics,audio}): Likewise.
2447 (print_insn): Add prototype.
2448 (arc_get_disassembler): New arg `big_p'. Return little or big
2449 print fn accordingly.
2450 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2451 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2452 (arc_opval_supported): Likewise.
2453 * disassemble.c (disassembler): Pass big endian flag to
2454 arc_get_disassembler.
2457 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2459 * ppc-opc.c: Sort recently added instructions by minor opcode
2460 number within major opcode number.
2462 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2464 * hppa-dis.c: Include libhppa.h.
2466 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2468 * mips-opc.c: Change dli to use M_DLI, and add dla.
2470 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2472 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2475 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2477 * arc-dis.c (arc_get_disassembler): Change argument to int,
2478 one of bfd_mach_arc_xxx. All callers updated.
2481 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2483 * mips-opc.c: Add r4650 mul instruction.
2485 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2487 * mips-opc.c: Add uld and usd macros for unaligned double load and
2490 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2492 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2493 mfdcr, mtdcr, icbt, iccci.
2496 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2498 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2499 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2500 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2501 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2502 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2503 (insert_absaddr): New function.
2505 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2507 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2508 New argument `cpu', pass it to arc_opcode_init_tables.
2509 Document byte order dependencies. Ignore unsupported insns.
2510 (arc_get_disassembler): New function.
2511 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2512 print_insn_arc_audio): New functions.
2513 * arc-opc.c (MULTSHIFT operand): Delete.
2514 (UNSIGNED, SATURATION): New operands.
2515 (mac, mul, mul64, mulu64): New insns.
2516 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2517 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2518 (host,graphics,audio extended and auxiliary regs): Define.
2519 (ss, sc, mh, ml): New suffixes.
2520 (arc_opcode_supported, arc_opval_supported): New functions.
2521 (insert_multshift, extract_multshift): Deleted.
2522 * disassemble.c (disassembler, case bfd_arch_arc): Call
2523 arc_get_disassembler to get disassembler routine.
2526 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2528 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2529 signed char fields to shorts, more portable.
2531 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2533 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2534 char fields as signed chars, since they may have negative values.
2536 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2538 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2539 (mycroft@netbsd.org).
2541 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2543 From "Logg, Ed" <elogg@ea.com>:
2544 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2545 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2548 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2550 * ppc-opc.c: Changes based on patch from David Edelsohn
2551 <edelsohn@mhpcc.edu>.
2552 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2555 (insert_tbr): New static function.
2556 (extract_tbr): New static function.
2557 (XFXFXM_MASK, XFXM): Define.
2558 (XSPRBAT_MASK, XSPRG_MASK): Define.
2559 (powerpc_opcodes): Add instructions to access special registers by
2560 name. Add mtcr and mftbu.
2562 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2564 * mips-opc.c (P3): Define.
2565 (mips_opcodes): Add mad and madu.
2567 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2569 * configure.in: Add W65 support.
2570 * disassemble.c: Likewise.
2571 * w65-opc.h, w65-dis.c: New files.
2573 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2575 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2579 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2581 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2583 * arc-opc.c (extract_reladdr): New function.
2584 (insert_reladdr): Store address right-shifted by 2.
2587 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2589 * mips-opc.c: Add dli as a synonym for li.
2592 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2594 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2596 (extraction fns): Insn argument now array of two words. Return pointer
2597 to value's table entry. All uses changed.
2598 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2599 (insert_multshift, extract_multshift): New fns.
2600 (arc_operands): Add support for cache bypass suffix. Add support for
2601 predefined aux regs. Modifier bits moved to flags field.
2602 (arc_opcodes): Likewise.
2603 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2604 New insn rlc. Update to syntax in programmer's manual.
2605 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2606 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2608 (arc_opcode_init_tables): New argument to indicate cpu type.
2609 (insert_reg): Handle predefined aux regs.
2610 (extract_reg): Likewise.
2611 (lookup_register): New fn.
2612 * arc-dis.c (arc_condition_codes): Deleted.
2613 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2614 Clean up modifier handling. Handle predefined aux regs.
2617 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2619 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2620 print something for reserved opcode values, even if it won't
2623 * mips-dis.c (_print_insn_mips): When initializing, shift right
2624 and mask, to avoid sign extension problems on the Alpha.
2626 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2630 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2632 * configure.in: Add ARC support.
2633 * disassemble.c: Likewise.
2634 * arc-dis.c, arc-opc.c: New files.
2637 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2639 * sh-opc.h (mov.l gbr): Get direction right.
2640 * sh-dis.c (print_insn_shx): New function.
2641 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2642 print opcodes with right byte order.
2644 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2646 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2647 to avoid conflicts with getopt.
2649 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2651 * hppa-dis.c (print_insn_hppa): Read the instruction using
2652 bfd_getb32, so that it works on a little endian or 64 bit host.
2653 Remove unused local variable op.
2655 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2657 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2658 addu does not work correctly if -mips3.
2660 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2662 * a29k-dis.c (print_special): Add special register names defined
2663 on 29030, 29040 and 29050.
2664 (print_insn): Handle new operand type 'I'.
2666 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2668 * Makefile.in (INSTALL): Use top level install.sh script.
2670 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2672 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2673 that it works on a little endian host.
2675 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2677 * configure.in: Use ${config_shell} when running config.bfd.
2679 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2681 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2683 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2685 * a29k-dis.c (print_insn): Print the opcode.
2687 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2689 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2691 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2693 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2695 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2697 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2698 which store a value into memory.
2700 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2702 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2703 * arm-dis.c, arm-opc.h: New files.
2705 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2707 * Makefile.in (ns32k-dis.o): Add dependency.
2708 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2709 string, not as array of chars.
2711 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2713 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2715 * sparc-opc.c: Added sparclite extended FP operations, and
2716 versions of v9 impdep* instructions permitting specification of
2719 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2721 * i960-dis.c (reg_names): Now const.
2722 (struct sparse_tabent): New type, copied from array type in mem
2724 (ctrl): Local static array ctrl_tab now const.
2725 (cobr): Local static array cobr_tab now const.
2726 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2727 static variable mem_tab no longer explicitly initialized. Changed
2728 mem_init to const array of struct sparse_tabent.
2729 (reg): Local static variable reg_tab no longer explicitly
2730 initialized. Changed reg_init to const array of struct
2732 (ea): Local static array scale_tab now const.
2734 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2737 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2739 * configure.bat: the disassember needs to be enabled for
2740 "objdump -d" to work in djgpp.
2742 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2744 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2745 (invalid_float): Enabled general version, doesn't require running
2746 on ns32k host. Changed to take char* argument, and test for
2747 explicitly specified sizes, instead of using sizeof() on host CPU
2749 (INVALID_FLOAT): Cast first argument.
2750 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2751 list_P032, list_M032): Now const.
2752 (optlist, list_search): Made appropriate arguments now point to
2754 (print_insn_arg): Changed static array of one-character-string
2755 pointers into a static const array of characters; fixed sprintf
2756 statement accordingly.
2758 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2760 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2761 from distribution. A ns32k-dis.c from a previous distribution has
2762 been brought up to date and supports the new interface.
2764 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2766 * configure.in: add bfd_ns32k_arch target support.
2768 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2769 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2771 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2773 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2776 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2778 * h8300-dis.c, mips-dis.c: Don't use true and false.
2780 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2782 * configure.in: Change --with-targets to --enable-targets.
2784 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2786 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2787 opcodes to the first instruction with that opcode, to speed
2788 disassembly of large files. From ralphc@pyramid.com (Ralph
2791 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2793 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2795 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2797 * configure.bat: update to latest makefile.in
2799 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2801 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2802 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2803 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2804 slot insn is in a delay slot.
2805 * z8k-opc.h: (resflg): Fix patterns.
2806 * h8500-opc.h Fix CR insn patterns.
2808 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2810 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2811 "cmpl" before POWER versions, so that gas -many uses them.
2813 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2815 * disassemble.c: New file.
2816 * Makefile.in (OFILES): Add disassemble.o.
2817 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2818 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2819 binutils/configure.in.
2821 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2822 opcode being examined.
2824 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2826 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2827 (insert_ral, insert_ram, insert_ras): New functions.
2828 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2829 RAS for store with update.
2831 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2833 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2834 (edelsohn@npac.syr.edu).
2836 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2838 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2841 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2843 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2845 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2847 * ppc-opc.c (powerpc_operands): The signedp field has been
2848 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2849 instead. Add new operand SISIGNOPT.
2850 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2851 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2852 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2855 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2857 * i386-dis.c (struct private): Renamed to dis_private. `private'
2858 is a reserved word for dynix cc.
2860 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2862 * configure.in: Change error message to refer to bfd/config.bfd
2863 rather than bfd/configure.in.
2865 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2867 * ppc-opc.c: Define POWER2 as short alias flag.
2868 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2871 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2873 * i960-dis.c (print_insn_i960): Don't read a second word for
2874 opcodes 0, 1, 2 and 3.
2876 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2878 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2880 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2882 * m68881-ext.c: Removed; no longer used.
2883 * Makefile.in: Changed accordingly.
2885 * m68k-dis.c (ext_format_68881): Don't declare.
2886 (print_insn_m68k): If an instruction uses place 'i', it uses at
2887 least four fixed bytes.
2888 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2889 extended float, convert to double using floatformat_to_double, not
2890 ieee_extended_to_double, and fetch the data before converting it.
2892 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2894 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2895 davidj@ICSI.Berkeley.EDU (David Johnson).
2897 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2899 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2900 PowerPC uses bdnz[l][a].
2902 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2904 * dis-buf.c, i386-dis.c: Include sysdep.h.
2906 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2908 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2910 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2911 by Motorola PowerPC 601 with PPC_OPCODE_601.
2912 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2913 Disassemble Motorola PowerPC 601 instructions as well as normal
2914 PowerPC instructions.
2916 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2918 * i960-dis.c (reg, mem): Just use a static array instead of
2921 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2923 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2924 condition name index if this is for a negated condition.
2926 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2927 Floating point format for 'H' operand is backwards from normal
2928 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2929 operands (fmpyadd and fmpysub), handle bizarre register
2930 translation correctly for single precision format.
2932 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2933 or 'I' operands if the next format specifier is 'M' (fcmp
2934 condition completer).
2936 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2938 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2939 single number giving a bitmask for the MB and ME fields of an M
2940 form instruction. Change NB to accept 32, and turn it into 0;
2941 also turn 0 into 32 when disassembling. Seperated SH from NB.
2942 (insert_mbe, extract_mbe): New functions.
2943 (insert_nb, extract_nb): New functions.
2944 (SC_MASK): Mask out SA and LK bits.
2945 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2946 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2947 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2948 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2949 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2950 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2951 (powerpc_macros): Define table of macro definitions.
2952 (powerpc_num_macros): Define.
2954 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2955 if PPC_OPERAND_NEXT is set.
2957 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2959 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2960 char. Retrieve contents using bfd_getl32 instead of shifting.
2962 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2964 * ppc-opc.c: New file. Opcode table for PowerPC, including
2965 opcodes for POWER (RS/6000).
2966 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2967 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2968 (CFILES): Add ppc-dis.c.
2969 (ppc-dis.o, ppc-opc.o): New targets.
2970 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2972 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2974 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2975 No space before 'u', 'f', or 'N'.
2977 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2979 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2980 farther than we should.
2982 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2984 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2986 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2988 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2990 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2991 needs it, to prevent reading past the end of a section.
2993 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2995 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2996 Removed t,A case for la; always use t,A(b) case.
2998 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3000 From Ted Lemen <mellon@pepper.ncd.com>
3001 * mips-dis.c (print_insn_arg): Handle 'k'.
3002 * mips-opc.c: Make cache use k, not t.
3004 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3006 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3007 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3008 FLOAT_FORMAT_CODE to put out floating point register names.
3010 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3012 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3014 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3018 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3020 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3021 larger than 32. Moved dsxx32 variants first for disassembler.
3023 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3025 * z8kgen.c, z8k-opc.h: Add full lda information.
3027 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3029 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3030 movb instructions. Any necessary space will be emitted by
3031 the code to handle nullification completers.
3033 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3037 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3039 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3040 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3042 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3044 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3046 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3048 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3049 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3051 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3053 * m88k-dis.c (m88kdis): comment change. Remove space after
3055 (printop): handle new arg types DEC and XREG for m88110.
3057 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3059 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3060 type for absolute branch addresses. Delete special
3061 "ble" and "be" code in 'W' operand code.
3063 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3065 * mips-opc.c: Set hazard information correctly for branch
3066 likely instructions.
3068 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3070 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3071 info->fprintf_func for printing and info->print_address_func for
3074 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3076 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3078 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3080 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3081 Corrected second case of "b" for disassembler.
3083 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3085 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3086 to BFD swapping routines to correspond to BFD name changes.
3088 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * mips-opc.c: Change div machine instruction to be z,s,t rather
3091 than s,t. Change div macro to be d,v,t rather than d,s,t.
3092 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3093 rem and remu which generates only the corresponding div
3094 instruction. This is for compatibility with the MIPS assembler,
3095 which only generates the simple machine instruction when an
3096 explicit destination of $0 is used.
3097 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3099 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3101 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3102 WR_31 hazard for bal, bgezal, bltzal.
3104 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3106 * hppa-dis.c (print_insn_hppa): Use print function
3107 from within the disassemble_info, not fprintf_filtered.
3109 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3111 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3112 Law, law@cs.utah.edu.)
3114 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3116 * mips-opc.c ("absu"): Removed.
3119 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3122 Changed hazard information to distinguish between memory load
3123 delays and coprocessor load delays.
3125 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3127 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3129 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3131 * configure.in: Don't pass cpu to config.bfd.
3133 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3135 * m88k-dis.c (m88kdis): Make class unsigned.
3137 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3139 * alpha-dis.c (print_insn_alpha): One branch format case was
3140 missing the instruction name.
3142 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3144 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3145 Add the arch-specific auxiliary files.
3146 (OFILES): Remove the arch-specific auxiliary files
3147 and use BFD_MACHINES instead of DIS_LIBS.
3148 * configure.in: Set BFD_MACHINES based on --with-targets option.
3150 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3152 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3155 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3157 * sparc-opc.c: Change CONST to const to deal with gcc
3158 -Dconst=__const -traditional.
3160 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3162 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3163 coprocessor instructions out of #if 0, and made them use new
3166 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3168 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3170 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3172 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3173 instruction, for use by the disassembler.
3175 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3176 hand-coded sign extensions that depended on 32-bit host ints.
3177 FIXME, we still depend on big-endian host bitfield ordering.
3178 (sparc_print_insn): Set the insn_info_valid field, and the
3179 other fields that describe the instruction being printed.
3181 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3183 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3184 `jmp' instead of just one of them.
3186 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3188 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3189 (fput_fp_reg_r): Renamed from fput_reg_r.
3190 (fput_fp_reg): New function.
3191 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3193 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3195 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3197 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3199 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3201 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3202 don't output a space.
3204 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3206 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3208 * mips-opc.c: New file, containing opcode table from
3209 ../include/opcode/mips.h.
3210 * Makefile.in: Add it.
3212 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3214 * m88k-dis.c: New file, moved in from gdb and changed to use the
3215 new dis-asm.h disassembler interface.
3216 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3217 (m88k-dis.o): New target.
3219 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3221 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3222 argument string const char * to correspond to opcode/mips.h.
3224 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3226 * mips-dis.c: Updated to account for name changes in new version
3228 * Makefile.in: Added header file dependencies.
3230 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3232 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3234 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3236 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3237 extend, rather than shifts.
3239 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3241 * Makefile.in: Undo 15 June change.
3243 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3245 * m68k-dis.c (print_insn_arg): Change return value to byte count
3247 * m68k-dis.c: Re-write to detect invalid operands before
3248 printing anything, so we can handle this the same way we
3249 handle invalid opcodes.
3251 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3253 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3255 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3257 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3260 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3262 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3264 * configure.in: Do make sysdep.h link.
3265 * Makefile.in: Search ../include. Don't search ../bfd.
3267 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3269 Changes from Jeff Law, law@cs.utah.edu:
3270 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3271 Do not print a space before the completers specified by
3274 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3276 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3277 defined, since gdb has been fixed.
3279 Changes from Jeff Law, law@cs.utah.edu:
3280 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3281 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3282 be a *disassemble_info, not a *FILE.
3283 * hppa-dis.c: Support 'd', '!', and 'a'.
3284 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3285 * hppa-dis.c: Delete cases which are no longer needed.
3287 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3289 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3291 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3293 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3296 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3298 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3299 * configure.in: No longer need to configure to get sysdep.h.
3301 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3303 * Patches from Jeffrey Law <law@cs.utah.edu>.
3304 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3305 templates for 1.1 FP computational instructions.
3307 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3309 * h8500-dis.c (print_insn_h8500): Address argument is type
3311 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3314 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3315 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3317 * sparc-dis.c (compare_opcodes): Move static declaration to
3320 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3322 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3323 instruction, remove unimp hack from 'l' argument.
3325 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3327 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3330 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3332 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3333 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3336 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3338 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3339 arrays of string pointers to 2-d arrays of chars, to save
3342 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3344 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3345 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3347 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3349 * hppa-dis.c: New file from Utah, adapted to new disassembler
3351 * Makefile.in: Include it.
3353 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3355 * sh-dis.c, sh-opc.h: New files.
3357 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3359 * alpha-dis.c, alpha-opc.h: New files.
3361 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3363 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3366 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3368 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3370 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3372 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3375 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3377 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3378 and double percent signs a few places.
3380 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3382 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3383 Use info->print_address_func not print_address.
3385 * dis-buf.c (generic_print_address): New function.
3387 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3389 * Makefile.in: Add sparc-dis.c.
3390 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3392 Add `add' instruction to the set that get checked
3393 for a preceding `sethi' in order to print an absolute address.
3394 * (print_insn): Disassembly prefers real instructions.
3395 (is_delayed_branch): Speed up.
3396 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3397 Still missing some float ops, and needs testing.
3398 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3399 F_ALIAS. Use printf, not fprintf, when not passing a file
3401 (compare_opcodes): Check that identical instructions have
3402 identical opcodes, complain otherwise.
3405 * Include reg_names.
3407 Use dis-asm.h/read_memory_func interface.
3409 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3411 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3412 deliberately return non-zero to setjmp from longjmp. Otherwise
3413 this code fails to compile.
3415 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3417 * m68k-dis.c: Fix prototype for fetch_arg().
3419 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3421 * dis-buf.c: New file, for new read_memory_func interface.
3422 Makefile.in (OFILES): Include it.
3423 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3424 Use new read_memory_func interface.
3426 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3428 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3429 * h8500-opc.h: Fix couple of opcodes.
3431 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3433 * Makefile.in: add dvi & installcheck targets
3435 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3437 * Makefile.in: Update for h8500-dis.c.
3439 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3441 * h8500-dis.c, h8500-opc.h: New files
3443 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3445 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3446 ../include/dis-asm.h.
3447 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3448 and ../gdb/m68k-pinsn.c).
3449 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3450 and ../gdb/i386-pinsn.c).
3451 * m68881-ext.c: New file. Moved definition of
3452 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3453 * Makefile.in: Adjust for new files.
3454 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3455 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3456 can be dis-assembled.
3458 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3460 * mips-dis.c (print_insn_arg): Now returns void.
3462 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3464 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3465 files that use the macros.
3467 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3469 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3470 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3471 (CFILES): Added mips-dis.c.
3473 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3475 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3476 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3478 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3480 * Makefile.in: Improve *clean rules.
3481 * configure.in: Allow a default host.
3483 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3485 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3486 files include other sysdep files
3488 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3490 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3492 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3494 * configure.in: For host support, use ../bfd/configure.host
3495 so it stays in sync with the ../bfd/hosts database.
3497 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3499 * configure.in: use cpu-vendor-os triple instead of nested cases
3501 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3503 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3504 *always* the wrong one.
3506 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3508 * z8kgen.c: added copyright info
3510 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3512 * z8k-dis.c (unparse_instr): prettier tabs
3513 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3515 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3517 * configure.in: Add ncr* configuration.
3518 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3519 picayune ANSI compilers happy.
3521 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3523 * configure.in (i386): Make i386 and i486 synonymous for now.
3524 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3526 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3528 * Makefile.in (install): Fix typo.
3530 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3532 * Makefile.in (make): Remove obsolete crud.
3533 (sparc-opc.o): Avoid Sun Make VPATH bug.
3535 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3537 * Makefile.in: since there are no SUBDIRS, remove rule and
3538 references of subdir_do.
3540 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3542 * Makefile.in (install): Get the library name right here too.
3543 Don't install bfd.h, since it's unrelated to this library. No
3544 subdirs to recurse into, either.
3545 (CFILES): The source file has a .c suffix, not .o.
3547 * sparc-opc.c: New file, moved from BFD.
3548 * Makefile.in (OFILES): Build it.
3550 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3552 * z8k-dis.c: fixed forward refferences of some declarations.
3554 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3556 * Makefile.in: get the name of the library right
3558 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3560 * z8k-dis.c: knows how to disassemble z8k stuff
3561 * z8k-opc.h: new file full of z8000 opcodes
3565 version-control: never