2 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
4 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
5 Add tx49 insns and configury.
8 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
10 * mips-opc.c (ffc, ffs): Fix mask.
13 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
15 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
19 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
21 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
23 Added VR5400 instructions.
24 (N5): New cpu-id macro.
26 (WR_HILO, RD_HILO, MOD_HILO): New macros.
28 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
30 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
31 (WR_HILO, RD_HILO, MOD_HILO): New macros.
33 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
35 * v850-dis.c (disassemble): Replace // with /* ... */
37 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
39 * sparc-opc.c: Add wr & rd for v9a asr's.
40 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
41 (v9a_asr_reg_names): New variable.
42 Patch from David Miller <davem@vger.rutgers.edu>.
44 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
46 * sparc-opc.c (v9notv9a): New insn type.
47 (IMPDEP): Move to the end to not conflict with edge8 et al.
48 Patch from David Miller <davem@vger.rutgers.edu>.
50 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
52 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
54 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
56 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
58 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
60 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
61 of disassemble_info structure to determine if an overlay address
62 has a matching symbol in low memory.
64 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
65 new symbol_at_address_func field in disassemble_info structure.
67 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
69 * v850-opc.c (extract_d22): Use signed arithmatic.
71 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
73 * mips-opc.c: Three op mult is not an ISA insn.
75 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
77 * mips-opc.c: Fix formatting.
79 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
81 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
82 than assuming that char is signed. Explicitly sign extend 16 bit
83 values, rather than assuming that short is 16 bits.
84 (OP_sI, OP_J, OP_DIR): Likewise.
87 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
89 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
93 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
95 * v850-opc.c: Fix typo in comment.
97 * v850-dis.c (disassemble): Add test of processor type when
100 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
102 * configure.in: Use a diversion to set enable_shared before the
103 arguments are parsed.
104 * configure: Rebuild.
106 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
108 * m68k-opc.c (TBL1): Use ! rather than `.
109 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
111 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
113 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
115 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
117 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
120 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
121 * aclocal.m4: Rebuild with new libtool.
122 * configure: Rebuild.
125 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
127 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
130 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
132 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
134 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
136 * v850-opc.c (v850_opcodes): Further rearrangements.
139 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
141 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
144 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
146 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
149 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
151 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
153 * mips16-opc.c: Added mips16 sdbbp.
156 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
158 * v850-opc.c: Initialise processors field of v850_opcode structure.
161 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
163 Merge changes from Martin Hunt:
165 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
167 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
168 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
169 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
171 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
173 * d30v-dis.c (print_insn): First operand of d*i (delayed
174 branch) instructions is relative.
176 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
177 (d30v_operand_table): Add IMM6S3 type.
178 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
180 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
181 and cmp instructions.
183 * d30v-opc.c: Correct entries for repeat*, and sat*.
184 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
185 types. Correct several formats.
187 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
189 * d30v-opc.c (pre_defined_registers): Change control registers.
191 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
192 SHORT_C2. Manual was incorrect.
194 * d30v-dis.c (lookup_opcode): Return value now indicates
195 if an opcode has a short and a long form. Used for deciding
196 to append a ".s" or ".l".
197 (print_insn): Append a ".s" to an instruction if it is
198 the short form and ".l" if it is a long form. Do not append
199 anything if the instruction has only one possible size.
201 * d30v-opc.c: Change mulx2h to require an even register.
202 New form: SHORT_A2; a SHORT_A form that needs an even
203 register as the first operand.
205 * d30v-dis.c (print_insn_d30v): Fix problem where the last
206 instruction was not being disassembled if there were an odd
207 number of instructions.
209 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
213 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
215 * v850-dis.c (disassemble): Improved display of register lists.
218 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
220 * sparc-opc.c (sparc_opcodes): Fix assembler args to
221 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
222 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
223 fandnot1s, fandnot2s.
225 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
227 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
229 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
231 * cgen-asm.c (cgen_parse_address): New argument resultp.
233 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
235 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
237 * mn10200-dis.c (disassemble): PC relative instructions are
238 relative to the next instruction, not the current instruction.
240 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
242 * v850-dis.c (disassemble): Only signed extend values that are not
243 returned by extract functions.
244 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
246 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
248 * v850-opc.c: Update comments. Remove use of
249 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
251 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
253 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
255 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
257 * configure: Rebuilt with latest devo autoconf for NT support.
259 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
261 * v850-dis.c (disassemble): Use curly brace syntax for register
264 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
265 where r0 is being used as a destination register.
268 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
270 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
274 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
276 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
277 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
278 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
279 Add insns to access SGR and DBR.
280 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
283 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
285 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
288 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
290 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
291 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
294 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
296 * configure (cgen_files): Add support for v850e target.
297 * configure.in (cgen_files): Add support for v850e target.
299 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
301 * configure (cgen_files): Add support for v850eq target.
302 * configure.in (cgen_files): Add support for v850eq target.
305 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
307 * configure.in (bfd_arc_arch): Add.
308 * configure: Rebuild.
309 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
310 * Makefile.in: Rebuild.
311 * arc-dis.c, arc-opc.c: New files.
312 * disassemble.c (ARCH_all): Define ARCH_arc.
313 (disassembler): Add ARC support.
315 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
318 * v850-dis.c (disassemble): Add support for v850EQ instructions.
320 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
321 (v850_opcodes): Add v850EQ instructions.
323 * v850-dis.c (disassemble): Add support for v850E instructions.
325 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
326 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
327 insert_spe, extract_spe): New Functions.
328 (v850_opcodes): Add v850E instructions.
331 * v850-opc.c: Reorganised and re-layed out to improve readability
334 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
336 * configure: Rebuild with autoconf 2.12.1.
338 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
340 * aclocal.m4, configure: Rebuild with new automake patches.
342 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
344 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
345 * acinclude.m4: Just include acinclude.m4 from BFD.
346 * aclocal.m4, configure: Rebuild.
348 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
350 * Makefile.am: New file, based on old Makefile.in.
351 * acconfig.h: New file.
352 * acinclude.m4: New file.
353 * stamp-h.in: New file.
354 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
355 Removed shared library handling; now handled by libtool. Replace
356 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
357 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
358 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
359 handling in AC_OUTPUT.
360 * dep-in.sed: Change .o to .lo.
361 * Makefile.in: Now built with automake.
362 * aclocal.m4: Now built with aclocal.
363 * config.in, configure: Rebuild.
365 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
367 * mips-opc.c: Fix typo/thinko in "eret" instruction.
370 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
372 * mips-opc.c: Fix coding of mtsa.
375 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
377 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
379 * sparc-dis.c (sorted_opcodes): New static local.
380 (struct opcode_hash): `opcode' is pointer to const element.
381 (build_hash): First arg is now table of sorted pointers.
382 (print_insn_sparc): Sort opcodes by sorting table of pointers.
383 (compare_opcodes): Update.
385 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
387 * cgen-opc.c: #include <ctype.h>.
388 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
389 Handle case insensitive hashing.
390 (hash_keyword_value): Change type of `value' to unsigned int.
392 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
394 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
395 precision FP, mark it as such. Likewise for double precision
396 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
399 (mips_builtin_opcodes): Remove non-existant r5900 instructions
403 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
405 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
406 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
409 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
411 * ppc-opc.c (extract_nsi): make unsigned expression signed before
413 (UNUSED): remove one level of parens, so MSVC doesn't choke on
414 nesting depth when all the macros are expanded.
416 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
418 * sparc-opc.c: The fcmp v9a instructions take an integer register
419 as a destination, not a floating point register. From Christian
420 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
422 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
424 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
425 syntax. From Roman Hodek
426 <rnhodek@faui22c.informatik.uni-erlangen.de>.
428 * i386-dis.c (twobyte_has_modrm): Fix pand.
430 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
432 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
434 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
436 * arm-dis.c: Add prototypes for arm_decode_shift and
439 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
441 * mips-opc.c: Add r3900 insns.
443 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
445 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
446 print delay slot instructions on the same line. When using a PC
447 relative load, add a comment with the value being loaded if it can
450 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
452 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
453 to pushS/popS for segment regs and byte constant so that
454 pushw/popw printed when in 16 bit data mode.
456 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
457 print cbtw, cwtd in 16 bit data mode.
458 * i386-dis.c (putop): extra case W to support above.
460 * i386-dis.c (print_insn_x86): print addr32 prefix when given
461 address size prefix in 16 bit address mode.
463 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
465 * sh-dis.c: Reindent. Rename local variable fprintf to
468 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
470 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
472 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
474 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
476 * mips16-opc.c (mip16_opcodes): same.
478 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
480 * m68k-opc.c (moveb): Change $d to %d.
482 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
484 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
485 (twobyte_has_modrm): Likewise.
487 (OP_MMX, OP_EM, OP_MS): New static functions.
489 * i386-dis.c: Revert patch of April 4. The output now matches
492 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
494 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
497 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
499 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
501 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
503 * Makefile.in (install): Depend upon installdirs.
504 (installdirs): New target.
506 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
508 From Thomas Graichen <graichen@rzpd.de>:
509 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
510 * configure: Rebuild.
512 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
514 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
515 Delete string{,s}.h support.
517 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
519 * cgen-asm.c (cgen_parse_operand_fn): New global.
520 (cgen_parse_{{,un}signed_integer,address}): Update call to
521 cgen_parse_operand_fn.
522 (cgen_init_parse_operand): New function.
523 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
524 from cgen_asm_init_parse.
525 (m32r_cgen_assemble_insn): New operand `errmsg'.
526 Delete call to as_bad, return error message to caller.
527 (m32r_cgen_asm_hash_keywords): #if 0 out.
529 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
531 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
533 [case 'J']: Fix typo in register name.
535 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
537 * configure.in: Substitute SHLIB_LIBS.
538 * configure: Rebuild.
539 * Makefile.in (SHLIB_LIBS): New variable.
540 ($(SHLIB)): Use $(SHLIB_LIBS).
542 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
544 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
546 * cgen-opc.c (hash_keyword_name): Improve algorithm.
548 * disassemble.c (disassembler): Handle m32r.
550 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
552 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
553 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
554 * Makefile.in (CFILES): Add them.
555 (ALL_MACHINES): Add them.
556 (dependencies): Regenerate.
557 * configure.in (cgen_files): New variable.
558 (bfd_m32r_arch): Add entry.
559 * configure: Regenerate.
561 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
563 * configure.in: Correct file names for bfd_mn10[23]00_arch.
564 * configure: Rebuild.
566 * Makefile.in: Rebuild dependencies.
568 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
570 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
573 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
575 * Branched binutils 2.8.
577 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
579 * m10200-dis.c: Rename from mn10200-dis.c.
580 * m10200-opc.c: Rename from mn10200-opc.c.
581 * m10300-dis.c: Rename from mn10300-dis.c
582 * m10300-opc.c: Rename from mn10300-opc.c.
583 * Makefile.in: Update accordingly.
585 * mips16-opc.c: Add mul and dmul macros.
587 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
589 * makefile.vms: Update CFLAGS, add clean target.
591 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
593 * mips-opc.c: Add "wait". From Ralf Baechle
594 <ralf@gnu.ai.mit.edu>.
596 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
597 * configure, config.in: Rebuild.
598 * sysdep.h: Include <stdlib.h> if it exists.
599 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
601 * Makefile.in: Rebuild dependencies.
603 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
605 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
606 Andrew Bray <andy@madhouse.demon.co.uk>.
608 * mips-opc.c: Add cast when setting mips_opcodes.
610 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
612 * v850-dis.c (disassemble): Fix sign extension problem.
613 * v850-opc.c (extract_d*): Fix sign extension problems to make
614 disassembly calculate branch offsets correctly.
616 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
618 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
620 * mips-opc.c: Add dctr and dctw.
623 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
625 * d30v-dis.c (print_insn): Change the way signed constants
628 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
630 * Makefile.in (BFD_H): New variable.
631 (HFILES): New variable.
632 (CFILES): Add all C files.
633 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
634 Delete old dependencies, and build new ones.
635 * dep-in.sed: New file.
637 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
639 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
641 start-sanitize-coldfire
642 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
644 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
647 end-sanitize-coldfire
648 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
650 * mn10200-opc.c: Change "trap" to "syscall".
651 * mn10300-opc.c: Add new "syscall" instruction.
653 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
655 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
656 mulul insns on the coldfire.
658 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
660 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
661 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
662 (print_insn_little_arm): Likewise.
664 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
666 Based on patches from H.J. Lu <hjl@lucon.org>:
667 * i386-dis.c (fetch_data): Add prototype.
668 * m68k-dis.c (fetch_data): Add prototype.
669 (dummy_print_address): Add prototype. Make static.
670 * ppc-opc.c (valid_bo): Add prototype.
671 * sparc-dis.c (build_hash_table): Add prototype.
672 (is_delayed_branch, compute_arch_mask): Add prototypes.
673 (print_insn_sparc): Make several local variables const.
674 (compare_opcodes): Change arguments to const PTR. Add prototype.
675 * sparc-opc.c (arg): Change name field to be const.
676 (lookup_name, lookup_value): Add prototypes. Change table and
677 name parameters to be const.
678 (sparc_encode_asi): Change name parameter to be const.
679 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
680 (sparc_encode_sparclet_cpreg): Likewise.
681 (sparc_decode_asi): Change return type to be const.
682 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
683 (sparc_decode_sparclet_cpreg): Likewise.
685 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
687 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
688 Solaris doesn't like the combined options, and the -f is
690 (stamp-tshlink, install): Likewise.
692 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
694 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
697 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
699 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
701 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
703 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
706 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
708 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
711 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
713 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
715 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
717 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
720 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
722 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
723 floatformat_to_double to make portable.
724 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
727 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
729 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
730 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
732 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
734 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
735 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
738 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
740 * tic80-opc.c (LSI_SCALED): Renamed from this ...
741 (OFF_SL_BR_SCALED): ... to this, and added the flag
742 TIC80_OPERAND_BASEREL to the flags word.
743 (tic80_opcodes): Replace all occurances of LSI_SCALED with
747 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
749 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
750 Change mips_opcodes from const array to a pointer,
751 and change bfd_mips_num_opcodes from const int to int,
752 so that we can increase the size of the mips opcodes table
756 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
758 * tic80-opc.c (tic80_predefined_symbols): Revert change to
759 store BITNUM values in the table in one's complement form
760 to match behavior when assembler is given a raw numeric
761 value for a BITNUM operand.
762 * tic80-dis.c (print_operand_bitnum): Ditto.
766 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
768 * d30v-opc.c: Removed references to FLAG_X.
771 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
773 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
776 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
778 * Makefile.in: Added d30v object files.
779 * configure: (bfd_d30v_arch) Rebuilt.
780 * configure.in: (bfd_d30v_arch) Added new case.
781 * d30v-dis.c: New file.
782 * d30v-opc.c: New file.
783 * disassemble.c (disassembler) Add entry for d30v.
787 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
789 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
790 representations for the floating point BITNUM values.
792 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
794 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
795 in the table in one's complement form, as they appear in the
797 (tic80_symbol_to_value): Use macros to access predefined
799 (tic80_value_to_symbol): Ditto.
800 (tic80_next_predefined_symbol): New function.
801 * tic80-dis.c (print_operand_bitnum): Remove code that did
802 one's complement for BITNUM values.
806 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
808 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
811 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
813 * makefile.vms: Remove 8 bit characters. Update to latest
816 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
818 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
820 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
822 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
823 (IMM24_PCREL): Likewise.
825 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
827 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
828 address for an extended PC relative instruction that is not a
831 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
833 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
837 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
839 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
840 (tic80_opcodes): Sort entries so that long immediate forms
841 come after short immediate forms, making it easier for
842 assembler to select the right one for a given operand.
845 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
847 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
849 (print_insn_mips16): Likewise.
852 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
854 * mips-opc.c: add r5900.
858 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
860 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
861 a symbol class that restricts translation to just that
862 class (general register, condition code, etc).
864 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
866 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
867 and REG_DEST_E for register operands that have to be
868 an even numbered register. Add REG_FPA for operands that
869 are one of the floating point accumulator registers.
870 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
871 (tic80_opcodes): Change entries that need even numbered
872 register operands to use the new operand table entries.
873 Add "or" entries that are identical to "or.tt" entries.
876 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
878 * mips16-opc.c: Add new cases of exit instruction for
880 * mips-dis.c (print_mips16_insn_arg): Display floating point
881 registers in operands of exit instruction. Print `$' before
882 register names in operands of entry and exit instructions.
885 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
887 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
888 pairs for all predefined symbols recognized by the assembler.
889 Also used by the disassembling routines.
890 (tic80_symbol_to_value): New function.
891 (tic80_value_to_symbol): New function.
892 * tic80-dis.c (print_operand_control_register,
893 print_operand_condition_code, print_operand_bitnum):
894 Remove private tables and use tic80_value_to_symbol function.
897 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
899 * d10v-dis.c (print_operand): Change address printing
900 to correctly handle PC wrapping. Fixes PR11490.
902 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
904 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
907 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
909 * mips-dis.c (print_insn_mips16): Set insn_info information.
910 (print_mips16_insn_arg): Likewise.
912 * mips-dis.c (print_insn_mips16): Better handling of an extend
913 opcode followed by an instruction which can not be extended.
915 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
917 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
918 coldfire moveb instruction to not allow an address register as
919 destination. Although the documentation does not indicate that
920 this is invalid, experiments uncovered unexpected behavior.
921 Added a comment explaining the situation. Thanks to Andreas
922 Schwab for pointing this out to me.
925 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
927 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
928 entries are presorted so that entries with the same mnemonic are
929 adjacent to each other in the table. Sort the entries for each
930 instruction so that this is true.
933 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
935 * m68k-dis.c: Include <libiberty.h>.
936 (print_insn_m68k): Sort the opcode table on the most significant
937 nibble of the opcode.
940 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
942 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
943 "vsub", "vst", "xnor", and "xor" instructions.
944 (V_a1): Renamed from V_a, msb of accumulator reg number.
945 (V_a0): Add macro, lsb of accumulator reg number.
947 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
949 * tic80-dis.c (print_insn_tic80): Broke excessively long
950 function up into several smaller ones and arranged for
951 the instruction printing function to be callable recursively
952 to print vector instructions that have both a load and a
953 math instruction packed into a single opcode.
954 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
955 to explain why it comes after the other vector opcodes.
958 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
960 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
961 move insns to handle immediate operands.
963 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
965 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
966 fix operand mask in the "moveml" entries for the coldfire.
969 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
971 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
972 New macros for building vector instruction opcodes.
973 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
974 FMT_LI, which were unused. The field is now a flags field.
975 Remove some opcodes that are possible, but illegal, such
976 as long immediate instructions with doubles for immediate
977 values. Add "vadd" and "vld" instructions.
979 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
981 * tic80-opc.c (tic80_operands): Reorder some table entries to make
982 the order more logical. Move the shift alias instructions ("rotl",
983 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
984 interspersed with the regular sr.x and sl.x instructions. Add
985 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
986 "sub", "subu", "swcr", and "trap".
988 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
990 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
991 (OFF_SL_PC): Renamed from OFF_SL.
992 (OFF_SS_BR): New operand type for base relative operand.
993 (OFF_SL_BR): New operand type for base relative operand.
994 (REG_BASE): New operand type for base register operand.
995 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
996 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
997 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
999 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1000 10 char field, padded with spaces on rhs, rather than a string
1001 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1002 than old TIC80_OPERAND_RELATIVE. Add support for new
1003 TIC80_OPERAND_BASEREL flag bit.
1005 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1007 * tic80-dis.c (print_insn_tic80): Print floating point operands
1009 * tic80-opc.c (SPFI): Add single precision floating point
1010 immediate operand type.
1011 (ROTATE): Add rotate operand type for shifts.
1012 (ENDMASK): Add for shifts.
1013 (n): Macro for the 'n' bit.
1014 (i): Macro for the 'i' bit.
1015 (PD): Macro for the 'PD' field.
1016 (P2): Macro for the 'P2' field.
1017 (P1): Macro for the 'P1' field.
1018 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1022 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1024 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1025 adding in current address for pc-relative operands.
1027 start-sanitize-tic80
1028 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1030 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1031 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1032 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1033 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1034 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1035 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1036 (REG_SCALED, LSI_SCALED): New operand types.
1037 (E): New macro for 'E' bit at bit 27.
1038 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1039 opcodes, including the various size flavors (b,h,w,d) for
1040 the direct load and store instructions.
1042 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1044 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1046 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1047 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1048 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1049 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1050 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1051 masks with "MASK_* & ~M_*" to get the M bit reset.
1052 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1054 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1056 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1057 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1058 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1060 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1061 CC, SICR, and LICR table entries.
1062 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1063 "bcnd", and "brcr" opcodes.
1066 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1068 * ppc-opc.c (powerpc_operands): Make comment match the
1069 actual fields (no shift field).
1070 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1071 start-sanitize-tic80
1072 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1073 partial implementation, work in progress.
1074 * tic80-opc.c (tic80_operands): Begin construction operands table.
1075 (tic80_opcodes): Continue populating opcodes table and start
1076 filling in the operand indices.
1077 (tic80_num_opcodes): Add this.
1080 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1082 * m68k-opc.c: Add #B case for moveq.
1084 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1086 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1087 before they are used.
1089 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1091 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1092 for "breakpoint" instruction.
1094 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1096 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1097 (dep): Use ALL_CFLAGS rather than CFLAGS.
1099 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1101 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1104 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1106 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1107 start-sanitize-tic80
1108 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1111 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1113 * mips16-opc.c: Add "abs".
1115 start-sanitize-tic80
1116 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1118 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1119 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1120 (disassembler): Add bfd_arch_tic80 support to set disassemble
1121 to print_insn_tic80.
1122 * tic80-dis.c (print_insn_tic80): Add stub.
1124 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1126 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1127 * configure: Regenerate with autoconf.
1128 * tic80-dis.c: Add file.
1129 * tic80-opc.c: Add file.
1132 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1134 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1136 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1138 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1139 (mn10200_opcodes): Use it for some logicals and btst insns.
1140 Add "break" and "trap" instructions.
1142 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1144 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1146 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1148 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1149 relative load or add now depends upon whether the instruction is
1152 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1154 * mn10200-dis.c: Finish writing disassembler.
1155 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1156 Fix mask for "jmp (an)".
1158 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1159 handle endianness issues for mn10300.
1161 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1163 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1165 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1166 instruction. Fix opcode field for "movb (imm24),dn".
1168 * mn10200-opc.c (mn10200_operands): Fix insertion position
1171 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1173 * mn10200-opc.c: Create mn10200 opcode table.
1174 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1175 but moving along nicely.
1177 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1179 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1181 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1183 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1184 specifiers for fmovem* instructions.
1186 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1188 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1190 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1192 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1195 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1197 * mn10300-opc.c: Add some comments explaining the various
1200 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1202 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1204 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1207 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1208 operand specifiers in fmovm* instructions.
1210 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1212 * ppc-opc.c (insert_li): Give an error if the offset has the two
1213 least significant bits set.
1215 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1217 * mips-dis.c (print_insn_mips16): Separate the instruction from
1218 the arguments with a tab, not a space.
1220 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1222 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1225 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1228 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1230 * configure: Rebuild with autoconf 2.12.
1232 Add support for mips16 (16 bit MIPS implementation):
1233 * mips16-opc.c: New file.
1234 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1235 (mips16_reg_names): New static array.
1236 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1237 after seeing a 16 bit symbol.
1238 (print_insn_little_mips): Likewise.
1239 (print_insn_mips16): New static function.
1240 (print_mips16_insn_arg): New static function.
1241 * mips-opc.c: Add jalx instruction.
1242 * Makefile.in (mips16-opc.o): New target.
1243 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1244 * configure: Rebuild.
1246 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1248 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1249 operand specifiers in *save, *restore and movem* instructions.
1251 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1254 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1255 register operands for immediate arithmetic, not, neg, negx, and
1256 set according to condition instructions.
1258 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1259 specifier of the effective-address operand in immediate forms of
1260 arithmetic instructions. The specifier for the immediate operand
1261 notes how and where the constant will be stored.
1263 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1265 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1268 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1271 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1273 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1275 * mn10300-dis.c (disassemble): Handle register lists.
1277 * mn10300-opc.c: Fix handling of register list operand for
1278 "call", "ret", and "rets" instructions.
1280 * mn10300-dis.c (disassemble): Print PC-relative and memory
1281 addresses symbolically if possible.
1282 * mn10300-opc.c: Distinguish between absolute memory addresses,
1283 pc-relative offsets & random immediates.
1285 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1287 (disassemble): Handle SPLIT and EXTENDED operands.
1289 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1291 * mn10300-dis.c: Rough cut at printing some operands.
1293 * mn10300-dis.c: Start working on disassembler support.
1294 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1296 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1298 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1300 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1302 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1304 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1306 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1307 register argument is calls and jmp instructions.
1309 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1311 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1312 getx operand. Fix opcode for mulqu imm,dn.
1314 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1316 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1317 in MN10300_OPERAND_SPLIT operands for how many bits
1318 appear in the basic insn word. Add IMM32_HIGH24,
1319 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1320 (mn10300_opcodes): Use new operands as needed.
1322 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1323 for bset, bclr, btst instructions.
1324 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1326 * mn10300-opc.c (mn10300_operands): Remove many redundant
1327 operands. Update opcode table as appropriate.
1328 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1329 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1331 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1333 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1334 operands (for indexed load/stores). Fix bitpos for DI
1335 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1336 few instructions that insert immediates/displacements in the
1337 middle of the instruction. Add IMM8E for 8 bit immediate in
1338 the extended part of an instruction.
1339 (mn10300_operands): Use new opcodes as appropriate.
1341 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1343 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1344 sequential so the assembler never parallelizes it with
1347 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1349 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1350 a data/address register that appears in register field 0
1351 and register field 1.
1352 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1354 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1356 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1357 standard disassembly.
1359 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1360 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1361 Recategorize PALcode instructions.
1363 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1365 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1367 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1369 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1370 there are no operand types.
1372 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1374 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1376 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1378 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1380 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1382 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1384 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1385 and sst.w instructions.
1387 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1390 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1392 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1395 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1397 * ppc-opc.c (PPCPWR2): Define.
1398 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1401 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1403 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1404 field for movhu instruction.
1406 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1407 cast value to "long" not "signed long" to keep hpux10
1410 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1412 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1415 * mn10300-opc.c (FMT*): Remove definitions.
1417 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1418 for shift-by-register opcodes.
1420 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1421 into [AD][MN][01] for encoding the position of the register
1424 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1426 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1427 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1429 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1431 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1432 Fix various typos. Add "PAREN" operand.
1433 (MEM, MEM2): Define.
1434 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1435 operands. Fix several typos.
1437 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1440 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1442 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1443 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1445 (mn10300_opcodes): Break opcode format out into its own field.
1446 Update many operand fields to deal with signed vs unsigned
1447 issues. Fix one or two typos in the "mov" instruction
1448 opcode, mask and/or operand fields.
1450 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1452 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1453 m68851 wasn't reset.
1455 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1457 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1458 all opcodes. Very rough cut at operands for all opcodes.
1460 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1463 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1465 * mn10200-opc.c, mn10300-opc.c: New files.
1466 * mn10200-dis.c, mn10300-dis.c: New files.
1467 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1468 * disassemble.c: Break mn10x00 support into 10200 and 10300
1470 * configure.in: Likewise.
1471 * configure: Rebuilt.
1473 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1475 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1477 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1479 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1481 * disassemble (ARCH_mn10x00): Define.
1482 (disassembler): Handle bfd_arch_mn10x00.
1483 * configure.in: Recognize bfd_mn10x00_arch.
1484 * configure: Rebuilt.
1486 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1488 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1489 accordingly. Don't declare functions using op_rtn.
1491 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1493 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1494 params to be more standard.
1495 * (disassemble): Print absolute addresses and symbolic names for
1496 branch and jump targets.
1497 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1499 * (v850_opcodes): Add breakpoint insn.
1501 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1503 * m68k-opc.c: Move the fmovemx data register cases before the
1504 other cases, so that they get recognized before the data register
1505 does gets treated as a degenerate register list.
1507 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1509 * mips-opc.c: Add a case for "div" and "divu" with two registers
1510 and a destination of $0.
1512 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1514 * mips-dis.c (print_insn_arg): Add prototype.
1515 (_print_insn_mips): Ditto.
1517 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1519 * mips-dis.c (print_insn_arg): Print condition code registers as
1522 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1524 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1526 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1528 * v850-dis.c (disassemble): Make static. Provide prototype.
1530 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1532 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1535 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1537 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1538 ']' characters into the output stream.
1539 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1540 Add "memop" field to all opcodes (for the disassembler).
1541 Reorder opcodes so that "nop" comes before "mov" and "jr"
1542 comes before "jarl".
1544 * v850-dis.c (print_insn_v850): Fix typo in last change.
1546 * v850-dis.c (print_insn_v850): Properly handle disassembling
1547 a two byte insn at the end of a memory region when the memory
1548 region's size is only two byte aligned.
1550 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1552 * v850-dis.c (v850_reg_names): Define.
1553 (v850_sreg_names, v850_cc_names): Likewise.
1554 (disassemble): Very rough cut at printing operands (unformatted).
1556 * v850-opc.c (BOP_MASK): Fix.
1557 (v850_opcodes): Fix mask for jarl and jr.
1559 * v850-dis.c: New file. Skeleton for disassembler support.
1560 * Makefile.in Remove v850 references, they're not needed here.
1561 * configure.in: Add v850-dis.o when building v850 toolchains.
1562 * configure: Rebuilt.
1563 * disassemble.c (disassembler): Call v850 disassembler.
1565 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1566 (insert_d8_6, extract_d8_6): New functions.
1567 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1568 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1570 (IF4A, IF4B): Use "D7" instead of "D7S".
1571 (IF4C, IF4D): Use "D8_7" instead of "D8".
1572 (IF4E, IF4F): New. Use "D8_6".
1573 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1574 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1576 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1577 (v850_operands): Change D16 to D16_15, use special insert/extract
1578 routines. New new D16 that uses the generic insert/extract code.
1579 (IF7A, IF7B): Use D16_15.
1580 (IF7C, IF7D): New. Use D16.
1581 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1583 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1584 message. Issue an error if the branch offset is odd.
1586 * v850-opc.c: Add notes about needing special insert/extract
1587 for all the load/store insns, except "ld.b" and "st.b".
1589 * v850-opc.c (insert_d22, extract_d22): New functions.
1590 (v850_operands): Use insert_d22 and extract_d22 for
1592 (insert_d9): Fix range check.
1594 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1596 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1597 and set bits field to D9 and D22 operands.
1599 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1601 * v850-opc.c (v850_operands): Define SR2 operand.
1602 (v850_opcodes): "ldsr" uses R1,SR2.
1604 * v850-opc.c (v850_opcodes): Fix opcode specs for
1605 sld.w, sst.b, sst.h, sst.w, and nop.
1607 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1609 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1610 end of the opcode table.
1612 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1614 * d10v-opc.c (pre_defined_registers): Added register pairs,
1615 "r0-r1", "r2-r3", etc.
1617 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1619 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1620 Create I16U for an unsigned 16bit mmediate operand.
1621 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1623 * v850-opc.c (v850_operands): Define EP operand.
1624 (IF4A, IF4B, IF4C, IF4D): Use EP.
1626 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1627 with immediate operand, "movhi". Tweak "ldsr".
1629 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1630 correct. Get sld.[bhw] and sst.[bhw] closer.
1632 * v850-opc.c (v850_operands): "not" is a two byte insn
1634 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1636 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1638 * v850-opc.c (two): Get order of words correct.
1640 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1642 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1643 register source and destination operands.
1644 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1646 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1647 same thinko in "trap" opcode.
1649 * v850-opc.c (v850_opcodes): Add initializer for size field
1652 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1653 Add D8 for 8-bit unsigned field in short load/store insns.
1654 (IF4A, IF4D): These both need two registers.
1655 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1656 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1657 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1658 for "ldsr" and "stsr".
1659 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1662 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1663 short store word (sst.w).
1665 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1667 * v850-opc.c (v850_operands): Added insert and extract fields,
1668 pointers to functions that handle unusual operand encodings.
1670 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1672 * v850-opc.c (v850_opcodes): Enable "trap".
1674 * v850-opc.c (v850_opcodes): Fix order of displacement
1675 and register for "set1", "clr1", "not1", and "tst1".
1677 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1679 * v850-opc.c (v850_operands): Add "B3" support.
1680 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1683 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1685 * v850-opc.c: Close unterminated comment.
1687 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1689 * v850-opc.c (v850_operands): Add flags field.
1690 (v850_opcodes): add move opcodes.
1692 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1694 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1695 * configure: (bfd_v850v_arch) Add new case.
1696 * configure.in: (bfd_v850_arch) Add new case.
1697 * v850-opc.c: New file.
1699 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1701 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1703 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1705 * d10v-opc.c: Add additional information to the opcode
1706 table to help determinine which instructions can be done
1709 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1711 * mpw-make.sed: Update editing of include pathnames to be
1714 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1716 * arm-opc.h: Added "bx" instruction definition.
1718 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1720 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1722 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1724 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1726 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1728 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1730 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1732 * makefile.vms: Update for alpha-opc changes.
1734 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1736 * i386-dis.c (print_insn_i386): Actually return the correct value.
1737 (ONE, OP_ONE): #ifdef out; not used.
1739 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1741 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1742 Changed subi operand type to treat 0 as 16.
1744 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1746 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1749 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1751 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1752 memory transfer instructions. Add new format string entries %h and %s.
1753 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1756 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1758 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1759 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1761 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1763 * alpha-dis.c (print_insn_alpha_osf): Remove.
1764 (print_insn_alpha_vms): Remove.
1765 (print_insn_alpha): Make globally visible. Chose the register
1766 names based on info->flavour.
1767 * disassemble.c: Always return print_insn_alpha for the alpha.
1769 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1771 * d10v-dis.c (dis_long): Handle unknown opcodes.
1773 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1775 * d10v-opc.c: Changes to support signed and unsigned numbers.
1776 All instructions with the same name that have long and short forms
1777 now end in ".l" or ".s". Divs added.
1778 * d10v-dis.c: Changes to support signed and unsigned numbers.
1780 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1782 * d10v-dis.c: Change all functions to use info->print_address_func.
1784 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1786 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1787 move ccr/sr insns more strict so that the disassembler only
1788 selects them when the addressing mode is data register.
1790 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1791 * d10v-opc.c (pre_defined_registers): Declare.
1792 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1793 to pick a better name for the registers.
1795 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1797 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1798 operands for fexpand and fpmerge. From Christian Kuehnke
1799 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1801 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1803 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1804 print routine. Take new regnames and cpumask arguments.
1805 Kill the environment variable nonsense.
1806 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1807 (print_insn_alpha_vms): New function. Do VMS style regnames.
1808 * disassemble.c (disassembler): Test bfd flavour to pick
1809 between OSF and VMS routines. Default to OSF.
1811 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1813 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1814 * configure: Rebuild.
1815 * Makefile.in (install): Use @INSTALL_SHLIB@.
1817 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1819 * configure: (bfd_d10v_arch) Add new case.
1820 * configure.in: (bfd_d10v_arch) Add new case.
1821 * d10v-dis.c: New file.
1822 * d10v-opc.c: New file.
1823 * disassemble.c (disassembler) Add entry for d10v.
1825 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1827 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1828 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1830 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1832 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1833 distinguish between variants of the instruction set.
1834 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1835 distinguish between variants of the instruction set.
1837 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1839 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1840 the 8086 instruction set.
1841 * i386-dis.c: General cleanups. Make most things static. Add
1842 prototypes. Get rid of static variables aflags and dflags. Pass
1843 them as args (to almost everything).
1845 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1847 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1849 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1851 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1852 if the next arg is marked with SRC_IN_DST. Gross.
1854 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1855 we're looking for and find EXR.
1857 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1858 if we're looking for KBIT and we don't find it.
1860 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1863 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1864 3bit immediate operands.
1866 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1868 * Released binutils 2.7.
1870 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1871 <kkaempf@progis.ac-net.de>.
1873 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1875 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1877 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1879 * sparc-dis.c (print_insn_sparclite): New routine to print
1880 sparclite instructions.
1882 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1884 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1886 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1888 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1889 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1890 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1892 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1894 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1895 Use autoconf-set values.
1896 (docdir, oldincludedir): Removed.
1897 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1899 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1901 * alpha-opc.c: New file.
1902 * alpha-opc.h: Remove.
1903 * alpha-dis.c: Complete rewrite to use new opcode table.
1904 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1905 * configure: Rebuild with autoconf 2.10.
1906 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1907 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1909 (alpha-opc.o): New target.
1911 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1913 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1914 Set imm_added_to_rs1 even if the source and destination register
1917 * sparc-opc.c: Add some two operand forms of the wr instruction.
1919 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1921 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1924 * disassemble.c (disassembler): Handle H8/S.
1925 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1927 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1929 * sparc-opc.c: Add beq/teq as aliases for be/te.
1931 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1932 <sergei@msil.sps.mot.com>.
1934 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1936 * makefile.vms: New file.
1938 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1940 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1942 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1945 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1947 * i386-dis.c (OP_OFF): Call append_prefix.
1949 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1951 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1952 unsigned long to silence a warning from the Solaris PowerPC
1955 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1957 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1959 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1961 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1963 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1964 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1965 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1966 cpush, cpusha, cpull sparclet insns.
1968 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1970 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1972 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1974 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1975 Set F_FLOAT on other floating point instructions.
1977 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1979 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1981 (powerpc_opcodes): Add 860/821 specific SPRs.
1983 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1985 * configure.in: Permit --enable-shared to specify a list of
1986 directories. Set and substitute BFD_PICLIST.
1987 * configure: Rebuild.
1988 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1989 uses. Set to @BFD_PICLIST@.
1991 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1993 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1994 not "abs", which may be needed for the absolute in something
1995 like btst #0,@10:8. Print L_3 immediates separately from other
1996 immediates. Change ABSMOV reference to ABS8MEM.
1998 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2000 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2001 (current_arch_mask): New static global.
2002 (compute_arch_mask): New static function.
2003 (print_insn_sparc): Delete sparc_v9_p. New static local
2004 current_mach. Resort opcode table if current_mach changes.
2005 Generalize "insn not supported" test.
2006 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2007 Delete test for v9/!v9.
2008 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2010 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2011 (brfcx): Renamed to FBRX.
2012 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2013 coprocessor mnemonics are not supported on the sparclet).
2014 (condf): Renamed to CONDF.
2015 (SLCBCC2): Delete F_ALIAS flag.
2017 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2019 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2020 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2022 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2024 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2025 that the shared library version number is set correctly.
2027 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2029 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2030 Miles Bader <miles@gnu.ai.mit.edu>.
2031 * configure: Rebuild.
2033 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2035 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2038 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2040 * configure: Rebuild with autoconf 2.8.
2042 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2044 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2045 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2047 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2049 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2050 since they appear as targets in Makefile.in.
2051 * configure: Rebuild.
2053 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2055 * mpw-make.sed: Edit out shared library support bits.
2057 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2059 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2060 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2061 (sparc_opcodes): Add sparclet insns.
2062 (sparclet_cpreg_table): New static local.
2063 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2064 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2066 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2068 * i386-dis.c (index16): New static variable.
2069 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2071 (OP_indirE): Return result of OP_E.
2072 (OP_E): Check for 16 bit addressing mode, and disassemble
2073 correctly. Optimised 32 bit case a little. Don't print
2074 "(base,index,scale)" when sib specifies only an offset.
2076 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2078 * configure.in: Set and substitute SHLIB_DEP.
2079 * configure: Rebuild.
2080 * Makefile.in (SHLIB_DEP): New variable.
2081 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2082 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2083 COMMON_SHLIB, add them to piclist with appropriate modifications.
2084 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2085 here: just use piclist.
2087 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2089 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2090 (print_insn_sparc): Rewrite v9/not-v9 tests.
2091 (compare_opcodes): Likewise.
2092 * sparc-opc.c (MASK_<ARCH>): Define.
2093 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2094 (sparclet,v6notv9): Define.
2095 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2096 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2098 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2100 * configure.in: Call AC_PROG_CC before configure.host.
2101 * configure: Rebuild.
2103 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2105 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2107 * i386-dis.c (onebyte_has_modrm): New static array.
2108 (twobyte_has_modrm): New static array.
2109 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2111 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2113 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2116 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2118 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2121 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2123 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2124 m68010up, not just m68020up | cpu32.
2126 * Makefile.in (SONAME): New variable.
2127 ($(SHLINK)): Make a link to the transformed name, as well.
2128 (stamp-tshlink): New target.
2129 (install): Skip stamp-tshlink during install.
2131 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2133 * configure.in: Call AC_ARG_PROGRAM.
2134 * configure: Rebuild.
2135 * Makefile.in (program_transform_name): New variable.
2136 (install): Transform library name before installing it.
2138 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2140 * i960-dis.c (mem): Add HX dcinva instruction.
2142 Support for building as a shared library, based on patches from
2143 Alan Modra <alan@spri.levels.unisa.edu.au>:
2144 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2145 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2146 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2147 * configure: Rebuild.
2148 * Makefile.in (ALLLIBS): New variable.
2149 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2150 (COMMON_SHLIB, SHLINK): New variables.
2151 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2152 (STAGESTUFF): Remove variable.
2153 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2154 (stamp-piclist, piclist): New targets.
2155 ($(SHLIB), $(SHLINK)): New targets.
2156 ($(OFILES)): Depend upon stamp-picdir.
2157 (disassemble.o): Build twice if PICFLAG is set.
2158 (MOSTLYCLEAN): Add pic/*.o.
2159 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2160 (distclean): Remove pic and stamp-picdir.
2161 (install): Install shared libraries.
2162 (stamp-picdir): New target.
2164 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2166 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2167 Print unknown instruction as "unknown", rather than in hex.
2169 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2171 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2173 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2175 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2177 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2179 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2180 when necessary. From Ulrich Drepper
2181 <drepper@myware.rz.uni-karlsruhe.de>.
2183 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2185 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2186 sparc_num_opcodes. Update architecture enum values.
2187 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2188 (sparc_opcode_lookup_arch): New function.
2189 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2190 (sparc_opcodes): Add v9a shutdown insn.
2192 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2194 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2195 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2197 (print_insn_sparc64): Deleted.
2198 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2201 * sparc-opc.c (architecture_pname): Add v9a.
2203 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2205 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2206 incorrectly defined as 0x16 when it should be 0x15.
2207 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2208 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2209 excb (exception barrier) which is defined in the Alpha
2210 Architecture Handbook version 2.
2211 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2212 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2213 disassembled as or, for example.
2215 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2217 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2218 (_print_insn_mips): Change i from int to unsigned int.
2220 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2222 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2223 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2225 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2227 * i386-dis.c: Added Pentium Pro instructions.
2229 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2231 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2234 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2236 * sh-opc.h (sh_nibble_type): Added REG_B.
2237 (sh_arg_type): Added A_REG_B.
2238 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2240 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2242 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2244 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2246 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2248 * Makefile.in (distclean): Remove stamp-h. From Ronald
2249 F. Guilmette <rfg@monkeys.com>.
2251 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2253 From David Mosberger-Tang <davidm@azstarnet.com>:
2254 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2257 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2259 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2260 (sh_table): Added many SH3 opcodes.
2261 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2263 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2265 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2266 (subco,subco.): Mark this PPC, not PPCCOM.
2268 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2270 * configure: Rebuild with autoconf 2.7.
2272 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2274 * configure: Rebuild with autoconf 2.6.
2276 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2278 * configure.in: Sort list of architectures. Accept but do nothing
2279 for alliant, convex, pyramid, romp, and tahoe.
2281 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2283 * a29k-dis.c (print_special): Change num to unsigned int.
2285 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2287 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2290 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2292 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2293 * configure: Rebuilt.
2295 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2297 * configure.in: Add case for bfd_i860_arch.
2298 * configure: Rebuild.
2300 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2302 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2303 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2304 (NEXTDOUBLE): Likewise.
2305 (print_insn_m68k): Don't match fmoveml if there is more than one
2306 register in the list.
2307 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2309 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2311 * m68k-opc.c: Use #W rather than #w.
2312 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2314 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2316 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2317 and likewise for all the dbxx opcodes.
2319 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2321 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2323 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2325 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2326 the VR4100 specific instructions to the mips_opcodes structure.
2328 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2330 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2331 ugly Metrowerks bug in CW6, is fixed in CW7.
2333 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2335 * ppc-opc.c (whole file): Add flags for common/any support.
2337 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2339 * Makefile.in (BISON): Remove macro.
2340 (FLAGS_TO_PASS): Remove BISON.
2342 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2344 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2346 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2347 instructions that take no args by looking at the match mask.
2348 (print_insn_arg): Always print "%" before register names.
2349 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2350 [case '_']: Don't print "@#" before address.
2351 [case 'J']: Use "%s" as format string, not register name.
2352 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2354 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2356 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2359 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2361 From David Mosberger-Tang <davidm@azstarnet.com>
2363 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2364 (alpha_insn_set): added definitions for VAX floating point
2365 instructions (Unix compilers don't generate these, but handcoded
2366 assembly might still use them).
2368 * alpha-dis.c (print_insn_alpha): added support for disassembling
2369 the miscellaneous instructions in the Alpha instruction set.
2371 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2373 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2374 no longer create sysdep.h, sed ppc-opc.c to work around a
2375 serious Metrowerks C bug.
2376 * mpw-make.in: Remove.
2377 * mpw-make.sed: New file, used by mpw-configure to edit
2378 Makefile.in into an MPW makefile.
2380 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2382 * Makefile.in (maintainer-clean): New synonym for realclean.
2384 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2386 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2387 which use '0', '1', and '2' instead. Specify the proper size for
2388 a pmove immediate operand. Correct the pmovefd patterns to be
2389 moves to a register, not from a register.
2390 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2392 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2394 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2395 %psr, %wim, %tbr as F_NOTV9.
2397 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2399 * Makefile.in (Makefile): Just rebuild Makefile when running
2401 (config.h, stamp-h): New targets.
2402 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2403 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2404 rebuilding config.h.
2405 * configure: Rebuild.
2407 * mips-opc.c: Change unaligned loads and stores with "t,A"
2408 operands to use "t,A(b)".
2410 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2412 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2414 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2416 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2417 until 3 instead of until 2.
2419 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2421 * Makefile.in (ALL_CFLAGS): Define.
2422 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2423 (MOSTLYCLEAN): Add config.log.
2424 (distclean): Don't remove config.log.
2425 * configure.in: Substitute HDEFINES.
2426 * configure: Rebuild.
2428 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2430 * sh-opc.h (sh_arg_type): Add F_FR0.
2431 (sh_table, case fmac): Add F_FR0 as first argument.
2433 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2435 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2437 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2439 * sparc-dis.c: Remove all references to NO_V9.
2441 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2443 * aclocal.m4: Just include ../bfd/aclocal.m4.
2444 * configure: Rebuild.
2446 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2448 * sparc-dis.c (X_DISP19): Define.
2449 (print_insn, case 'G'): Use it.
2450 (print_insn, case 'L'): Sign extend displacement.
2452 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2454 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2455 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2456 host_makefile_frag or frags.
2457 * aclocal.m4: New file.
2458 * configure: Rebuild.
2459 * Makefile.in (INSTALL): Set to @INSTALL@.
2460 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2461 (INSTALL_DATA): Set to @INSTALL_DATA@.
2463 (AR_FLAGS): Set to rc rather than qc.
2464 (CC): Define as @CC@.
2465 (CFLAGS): Set to @CFLAGS@.
2466 (@host_makefile_frag@): Remove.
2467 (config.status): Remove dependency upon @frags@.
2469 * configure.in: ../bfd/config.bfd now just sets shell variables.
2470 Use them rather than looking through target Makefile fragments.
2471 * configure: Rebuild.
2473 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2475 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2477 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2479 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2480 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2483 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2484 (lookup_{name,value}): New functions.
2485 (prefetch_table): New static local.
2486 (sparc_{encode,decode}_prefetch): New functions.
2487 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2489 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2491 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2494 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2496 * sh-dis.c: Correct comment on first line of file.
2498 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2500 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2502 * sparc-opc.c (asi, membar): New static locals.
2503 (sparc_{encode,decode}_{asi,membar}): New functions.
2504 (sparc_opcodes, membar insn): Fix.
2505 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2506 Support decoding of membar masks.
2509 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2511 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2513 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2515 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2516 and likewise for the other branches. Add bhs as an alias for bcc,
2517 and likewise for the size variants. Add dbhs as an alias for
2520 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2522 * sh-opc.h (FP sts instructions): Update to match reality.
2524 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2526 * m68k-dis.c: (fpcr_names): Add % before all register names.
2527 (reg_names): Likewise.
2528 (print_insn_arg): Don't explicitly print % before register names.
2529 Add % before register names in static array names. In case 'r',
2530 print data registers as `@(Dn)', not `Dn@'. When printing a
2531 memory address, don't print @# before it.
2532 (print_indexed): Change base_disp and outer_disp from int to
2533 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2534 syntax. Sign extend 8 byte displacement correctly.
2535 (print_base): Print using MIT syntax. Print zpc when appropriate.
2536 Change parameter disp from int to bfd_vma.
2538 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2541 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2543 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2544 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2545 * sh-opc.h (sh_arg_type): Add new operand types.
2546 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2548 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2550 * Makefile.in (distclean): Remove generated file config.h.
2552 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2554 * Makefile.in (distclean): Remove generated file config.h.
2556 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2558 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2560 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2562 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2563 rather than numopcodes. Use m68k_opcodes rather than removed
2564 opcode function. Don't check F_ALIAS.
2565 (print_insn_arg): Change first parameter to be const char *.
2566 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2567 (m68k-opc.o): New target.
2568 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2569 * configure: Rebuild.
2571 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2573 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2574 (opcode_bits, opcode_hash_table): New variables.
2575 (opcodes_initialized): Renamed from opcodes_sorted.
2576 (build_hash_table): New function.
2577 (is_delayed_branch): Use hash table.
2578 (print_insn): Renamed from print_insn_sparc, made static.
2579 Build and use hash table. If !sparc64, ignore sparc64 insns,
2580 and vice-versa if sparc64.
2581 (print_insn_sparc, print_insn_sparc64): New functions.
2582 (compare_opcodes): Move sparc64 opcodes to end.
2583 Print commutative insns with constant second.
2584 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2586 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2588 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2589 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2590 avoids printing a delay slot in a delay slot.
2591 * sh-opc.h (sh_table): Fully bracket last entry.
2593 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2595 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2597 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2599 * configure.in: Get host_makefile_frag from ${srcdir}.
2601 * configure.in: Autoconfiscated. Check for string[s].h. Create
2602 config.h from config.in. Don't set up sysdep.h link.
2603 * sysdep.h: New file.
2604 * configure, config.in: New files, generated from configure.in.
2605 * Makefile.in: Updated to be processed autoconf-style.
2606 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2607 (Makefile): Depend on config.status.
2608 (config.status): New rule.
2609 * configure.bat: Update Makefile substitutions.
2611 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2613 * mips-opc.c (L1): Define.
2614 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2615 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2618 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2620 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2621 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2622 have multiple add units but only a single logical unit.
2624 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2625 shifted by 18, without any insertion or extraction function.
2626 (insert_cr, extract_cr): Remove.
2628 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2630 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2633 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2635 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2636 * sh-opc.h: Add copyright.
2638 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2640 * Makefile.in (crunch-m68k): Delete extra target accidentally
2641 checked in a while ago.
2643 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2645 * sh-opc.h (sh_table): Add SH3 support.
2647 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2649 * sh-opc.h: Added bsrf and braf.
2651 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2653 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2654 bogus [ls]fm{ea,fd} patterns.
2656 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2657 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2658 initialize it from memory. Make function static.
2659 (print_insn_{big,little}_arm): New functions.
2660 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2661 the correct endianness.
2663 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2665 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2668 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2670 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2671 17th, so that it builds again using GCC as the compiler.
2673 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2675 * mips-dis.c (print_insn_little_mips): Cast return value from
2676 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2677 expects an unsigned long, and that might be fewer words of
2678 argument storage (e.g., if bfd_vma is long long on a 32-bit
2680 (print_insn_big_mips): Likewise with bfd_getb32 value.
2681 (_print_insn_mips): Now static.
2683 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2685 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2686 gcc memory hog problem with initializer is fixed.
2688 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2690 Merge in support for Mac MPW as a host.
2691 (Old change descriptions retained for informational value.)
2693 * mpw-config.in (archname): Compute from the config.
2694 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2696 * mpw-config.in (target_arch): Compute from canonical target.
2697 (m68k, mips, powerpc, sparc): Add architectures.
2698 * mpw-make.in (disassemble.c.o): Add.
2699 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2701 * mpw-config.in (BFD_MACHINES): Set to a default value.
2702 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2704 * mpw-make.in (CSEARCH): Add extra-include to search path.
2706 * mpw-config.in (varargs.h): Don't create.
2707 (sysdep.h): Create using forward-include.
2708 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2710 * mpw-config.in: New file, MPW version of configure.in.
2711 * mpw-make.in: New file, MPW version of Makefile.in.
2713 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2715 * alpha-dis.c (print_insn_alpha): Put empty statement after
2718 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2720 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2721 (low_sign_extend): Likewise.
2722 (get_field): Delete unused function.
2723 (set_field, deposit_14, deposit_21): Likewise.
2725 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2727 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2730 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2732 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2734 * alpha-opc.h (OSF_ASMCODE): define
2735 print pal-code names as defined in App C of the
2736 Alpha Architecture Reference Manual
2738 * alpha-dis.c: cleaned up output
2739 print stylized code forms as defined in App A.4.3 of the
2740 Alpha Architecture Reference Manual
2742 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2744 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2746 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2749 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2751 * m68k-dis.c (opcode): New function. Returns address of opcode
2752 table entry given index, even if the opcode table was split to
2753 work around gcc bugs.
2754 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2756 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2757 (reg_names): Now const.
2758 (print_insn_arg): Arrays cacheFieldName and names now const.
2759 (print_indexed): Array scales now const.
2761 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2763 * ppc-opc.c: Sort recently added instructions by minor opcode
2764 number within major opcode number.
2766 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2768 * hppa-dis.c: Include libhppa.h.
2770 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2772 * mips-opc.c: Change dli to use M_DLI, and add dla.
2774 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2776 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2778 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2780 * mips-opc.c: Add r4650 mul instruction.
2782 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2784 * mips-opc.c: Add uld and usd macros for unaligned double load and
2787 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2789 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2790 mfdcr, mtdcr, icbt, iccci.
2792 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2794 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2795 signed char fields to shorts, more portable.
2797 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2799 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2800 char fields as signed chars, since they may have negative values.
2802 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2804 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2805 (mycroft@netbsd.org).
2807 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2809 From "Logg, Ed" <elogg@ea.com>:
2810 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2811 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2814 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2816 * ppc-opc.c: Changes based on patch from David Edelsohn
2817 <edelsohn@mhpcc.edu>.
2818 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2821 (insert_tbr): New static function.
2822 (extract_tbr): New static function.
2823 (XFXFXM_MASK, XFXM): Define.
2824 (XSPRBAT_MASK, XSPRG_MASK): Define.
2825 (powerpc_opcodes): Add instructions to access special registers by
2826 name. Add mtcr and mftbu.
2828 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2830 * mips-opc.c (P3): Define.
2831 (mips_opcodes): Add mad and madu.
2833 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2835 * configure.in: Add W65 support.
2836 * disassemble.c: Likewise.
2837 * w65-opc.h, w65-dis.c: New files.
2839 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2841 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2844 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2846 * mips-opc.c: Add dli as a synonym for li.
2848 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2850 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2851 print something for reserved opcode values, even if it won't
2854 * mips-dis.c (_print_insn_mips): When initializing, shift right
2855 and mask, to avoid sign extension problems on the Alpha.
2857 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2860 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2862 * sh-opc.h (mov.l gbr): Get direction right.
2863 * sh-dis.c (print_insn_shx): New function.
2864 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2865 print opcodes with right byte order.
2867 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2869 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2870 to avoid conflicts with getopt.
2872 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2874 * hppa-dis.c (print_insn_hppa): Read the instruction using
2875 bfd_getb32, so that it works on a little endian or 64 bit host.
2876 Remove unused local variable op.
2878 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2880 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2881 addu does not work correctly if -mips3.
2883 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2885 * a29k-dis.c (print_special): Add special register names defined
2886 on 29030, 29040 and 29050.
2887 (print_insn): Handle new operand type 'I'.
2889 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2891 * Makefile.in (INSTALL): Use top level install.sh script.
2893 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2895 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2896 that it works on a little endian host.
2898 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2900 * configure.in: Use ${config_shell} when running config.bfd.
2902 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2904 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2906 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2908 * a29k-dis.c (print_insn): Print the opcode.
2910 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2912 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2914 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2916 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2918 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2920 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2921 which store a value into memory.
2923 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2925 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2926 * arm-dis.c, arm-opc.h: New files.
2928 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2930 * Makefile.in (ns32k-dis.o): Add dependency.
2931 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2932 string, not as array of chars.
2934 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2936 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2938 * sparc-opc.c: Added sparclite extended FP operations, and
2939 versions of v9 impdep* instructions permitting specification of
2942 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2944 * i960-dis.c (reg_names): Now const.
2945 (struct sparse_tabent): New type, copied from array type in mem
2947 (ctrl): Local static array ctrl_tab now const.
2948 (cobr): Local static array cobr_tab now const.
2949 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2950 static variable mem_tab no longer explicitly initialized. Changed
2951 mem_init to const array of struct sparse_tabent.
2952 (reg): Local static variable reg_tab no longer explicitly
2953 initialized. Changed reg_init to const array of struct
2955 (ea): Local static array scale_tab now const.
2957 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2960 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2962 * configure.bat: the disassember needs to be enabled for
2963 "objdump -d" to work in djgpp.
2965 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2967 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2968 (invalid_float): Enabled general version, doesn't require running
2969 on ns32k host. Changed to take char* argument, and test for
2970 explicitly specified sizes, instead of using sizeof() on host CPU
2972 (INVALID_FLOAT): Cast first argument.
2973 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2974 list_P032, list_M032): Now const.
2975 (optlist, list_search): Made appropriate arguments now point to
2977 (print_insn_arg): Changed static array of one-character-string
2978 pointers into a static const array of characters; fixed sprintf
2979 statement accordingly.
2981 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2983 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2984 from distribution. A ns32k-dis.c from a previous distribution has
2985 been brought up to date and supports the new interface.
2987 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2989 * configure.in: add bfd_ns32k_arch target support.
2991 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2992 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2994 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2996 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2999 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3001 * h8300-dis.c, mips-dis.c: Don't use true and false.
3003 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3005 * configure.in: Change --with-targets to --enable-targets.
3007 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3009 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3010 opcodes to the first instruction with that opcode, to speed
3011 disassembly of large files. From ralphc@pyramid.com (Ralph
3014 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3018 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3020 * configure.bat: update to latest makefile.in
3022 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3024 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3025 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3026 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3027 slot insn is in a delay slot.
3028 * z8k-opc.h: (resflg): Fix patterns.
3029 * h8500-opc.h Fix CR insn patterns.
3031 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3033 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3034 "cmpl" before POWER versions, so that gas -many uses them.
3036 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3038 * disassemble.c: New file.
3039 * Makefile.in (OFILES): Add disassemble.o.
3040 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3041 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3042 binutils/configure.in.
3044 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3045 opcode being examined.
3047 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3049 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3050 (insert_ral, insert_ram, insert_ras): New functions.
3051 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3052 RAS for store with update.
3054 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3056 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3057 (edelsohn@npac.syr.edu).
3059 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3061 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3064 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3066 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3068 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3070 * ppc-opc.c (powerpc_operands): The signedp field has been
3071 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3072 instead. Add new operand SISIGNOPT.
3073 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3074 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3075 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3078 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3080 * i386-dis.c (struct private): Renamed to dis_private. `private'
3081 is a reserved word for dynix cc.
3083 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3085 * configure.in: Change error message to refer to bfd/config.bfd
3086 rather than bfd/configure.in.
3088 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3090 * ppc-opc.c: Define POWER2 as short alias flag.
3091 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3094 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3096 * i960-dis.c (print_insn_i960): Don't read a second word for
3097 opcodes 0, 1, 2 and 3.
3099 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3101 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3103 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3105 * m68881-ext.c: Removed; no longer used.
3106 * Makefile.in: Changed accordingly.
3108 * m68k-dis.c (ext_format_68881): Don't declare.
3109 (print_insn_m68k): If an instruction uses place 'i', it uses at
3110 least four fixed bytes.
3111 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3112 extended float, convert to double using floatformat_to_double, not
3113 ieee_extended_to_double, and fetch the data before converting it.
3115 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3117 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3118 davidj@ICSI.Berkeley.EDU (David Johnson).
3120 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3122 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3123 PowerPC uses bdnz[l][a].
3125 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3127 * dis-buf.c, i386-dis.c: Include sysdep.h.
3129 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3133 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3134 by Motorola PowerPC 601 with PPC_OPCODE_601.
3135 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3136 Disassemble Motorola PowerPC 601 instructions as well as normal
3137 PowerPC instructions.
3139 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3141 * i960-dis.c (reg, mem): Just use a static array instead of
3144 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3146 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3147 condition name index if this is for a negated condition.
3149 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3150 Floating point format for 'H' operand is backwards from normal
3151 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3152 operands (fmpyadd and fmpysub), handle bizarre register
3153 translation correctly for single precision format.
3155 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3156 or 'I' operands if the next format specifier is 'M' (fcmp
3157 condition completer).
3159 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3161 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3162 single number giving a bitmask for the MB and ME fields of an M
3163 form instruction. Change NB to accept 32, and turn it into 0;
3164 also turn 0 into 32 when disassembling. Seperated SH from NB.
3165 (insert_mbe, extract_mbe): New functions.
3166 (insert_nb, extract_nb): New functions.
3167 (SC_MASK): Mask out SA and LK bits.
3168 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3169 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3170 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3171 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3172 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3173 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3174 (powerpc_macros): Define table of macro definitions.
3175 (powerpc_num_macros): Define.
3177 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3178 if PPC_OPERAND_NEXT is set.
3180 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3182 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3183 char. Retrieve contents using bfd_getl32 instead of shifting.
3185 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3187 * ppc-opc.c: New file. Opcode table for PowerPC, including
3188 opcodes for POWER (RS/6000).
3189 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3190 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3191 (CFILES): Add ppc-dis.c.
3192 (ppc-dis.o, ppc-opc.o): New targets.
3193 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3195 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3197 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3198 No space before 'u', 'f', or 'N'.
3200 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3202 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3203 farther than we should.
3205 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3207 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3209 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3211 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3213 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3214 needs it, to prevent reading past the end of a section.
3216 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3218 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3219 Removed t,A case for la; always use t,A(b) case.
3221 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3223 From Ted Lemen <mellon@pepper.ncd.com>
3224 * mips-dis.c (print_insn_arg): Handle 'k'.
3225 * mips-opc.c: Make cache use k, not t.
3227 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3229 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3230 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3231 FLOAT_FORMAT_CODE to put out floating point register names.
3233 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3235 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3237 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3239 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3241 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3243 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3244 larger than 32. Moved dsxx32 variants first for disassembler.
3246 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3248 * z8kgen.c, z8k-opc.h: Add full lda information.
3250 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3252 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3253 movb instructions. Any necessary space will be emitted by
3254 the code to handle nullification completers.
3256 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3258 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3260 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3262 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3263 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3265 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3269 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3271 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3272 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3274 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3276 * m88k-dis.c (m88kdis): comment change. Remove space after
3278 (printop): handle new arg types DEC and XREG for m88110.
3280 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3282 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3283 type for absolute branch addresses. Delete special
3284 "ble" and "be" code in 'W' operand code.
3286 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3288 * mips-opc.c: Set hazard information correctly for branch
3289 likely instructions.
3291 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3293 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3294 info->fprintf_func for printing and info->print_address_func for
3297 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3299 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3301 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3303 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3304 Corrected second case of "b" for disassembler.
3306 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3308 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3309 to BFD swapping routines to correspond to BFD name changes.
3311 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3313 * mips-opc.c: Change div machine instruction to be z,s,t rather
3314 than s,t. Change div macro to be d,v,t rather than d,s,t.
3315 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3316 rem and remu which generates only the corresponding div
3317 instruction. This is for compatibility with the MIPS assembler,
3318 which only generates the simple machine instruction when an
3319 explicit destination of $0 is used.
3320 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3322 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3324 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3325 WR_31 hazard for bal, bgezal, bltzal.
3327 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3329 * hppa-dis.c (print_insn_hppa): Use print function
3330 from within the disassemble_info, not fprintf_filtered.
3332 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3334 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3335 Law, law@cs.utah.edu.)
3337 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3339 * mips-opc.c ("absu"): Removed.
3342 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3344 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3345 Changed hazard information to distinguish between memory load
3346 delays and coprocessor load delays.
3348 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3350 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3352 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3354 * configure.in: Don't pass cpu to config.bfd.
3356 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3358 * m88k-dis.c (m88kdis): Make class unsigned.
3360 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3362 * alpha-dis.c (print_insn_alpha): One branch format case was
3363 missing the instruction name.
3365 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3367 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3368 Add the arch-specific auxiliary files.
3369 (OFILES): Remove the arch-specific auxiliary files
3370 and use BFD_MACHINES instead of DIS_LIBS.
3371 * configure.in: Set BFD_MACHINES based on --with-targets option.
3373 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3375 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3378 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3380 * sparc-opc.c: Change CONST to const to deal with gcc
3381 -Dconst=__const -traditional.
3383 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3385 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3386 coprocessor instructions out of #if 0, and made them use new
3389 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3391 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3393 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3395 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3396 instruction, for use by the disassembler.
3398 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3399 hand-coded sign extensions that depended on 32-bit host ints.
3400 FIXME, we still depend on big-endian host bitfield ordering.
3401 (sparc_print_insn): Set the insn_info_valid field, and the
3402 other fields that describe the instruction being printed.
3404 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3406 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3407 `jmp' instead of just one of them.
3409 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3411 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3412 (fput_fp_reg_r): Renamed from fput_reg_r.
3413 (fput_fp_reg): New function.
3414 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3416 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3418 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3420 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3422 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3424 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3425 don't output a space.
3427 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3429 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3431 * mips-opc.c: New file, containing opcode table from
3432 ../include/opcode/mips.h.
3433 * Makefile.in: Add it.
3435 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3437 * m88k-dis.c: New file, moved in from gdb and changed to use the
3438 new dis-asm.h disassembler interface.
3439 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3440 (m88k-dis.o): New target.
3442 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3444 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3445 argument string const char * to correspond to opcode/mips.h.
3447 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3449 * mips-dis.c: Updated to account for name changes in new version
3451 * Makefile.in: Added header file dependencies.
3453 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3455 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3457 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3459 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3460 extend, rather than shifts.
3462 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3464 * Makefile.in: Undo 15 June change.
3466 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3468 * m68k-dis.c (print_insn_arg): Change return value to byte count
3470 * m68k-dis.c: Re-write to detect invalid operands before
3471 printing anything, so we can handle this the same way we
3472 handle invalid opcodes.
3474 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3476 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3478 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3480 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3483 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3485 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3487 * configure.in: Do make sysdep.h link.
3488 * Makefile.in: Search ../include. Don't search ../bfd.
3490 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3492 Changes from Jeff Law, law@cs.utah.edu:
3493 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3494 Do not print a space before the completers specified by
3497 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3499 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3500 defined, since gdb has been fixed.
3502 Changes from Jeff Law, law@cs.utah.edu:
3503 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3504 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3505 be a *disassemble_info, not a *FILE.
3506 * hppa-dis.c: Support 'd', '!', and 'a'.
3507 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3508 * hppa-dis.c: Delete cases which are no longer needed.
3510 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3512 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3514 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3516 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3519 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3521 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3522 * configure.in: No longer need to configure to get sysdep.h.
3524 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3526 * Patches from Jeffrey Law <law@cs.utah.edu>.
3527 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3528 templates for 1.1 FP computational instructions.
3530 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3532 * h8500-dis.c (print_insn_h8500): Address argument is type
3534 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3537 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3538 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3540 * sparc-dis.c (compare_opcodes): Move static declaration to
3543 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3545 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3546 instruction, remove unimp hack from 'l' argument.
3548 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3550 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3553 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3555 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3556 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3559 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3561 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3562 arrays of string pointers to 2-d arrays of chars, to save
3565 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3567 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3568 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3570 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3572 * hppa-dis.c: New file from Utah, adapted to new disassembler
3574 * Makefile.in: Include it.
3576 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3578 * sh-dis.c, sh-opc.h: New files.
3580 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3582 * alpha-dis.c, alpha-opc.h: New files.
3584 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3586 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3589 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3591 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3593 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3595 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3598 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3600 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3601 and double percent signs a few places.
3603 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3605 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3606 Use info->print_address_func not print_address.
3608 * dis-buf.c (generic_print_address): New function.
3610 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3612 * Makefile.in: Add sparc-dis.c.
3613 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3615 Add `add' instruction to the set that get checked
3616 for a preceding `sethi' in order to print an absolute address.
3617 * (print_insn): Disassembly prefers real instructions.
3618 (is_delayed_branch): Speed up.
3619 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3620 Still missing some float ops, and needs testing.
3621 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3622 F_ALIAS. Use printf, not fprintf, when not passing a file
3624 (compare_opcodes): Check that identical instructions have
3625 identical opcodes, complain otherwise.
3628 * Include reg_names.
3630 Use dis-asm.h/read_memory_func interface.
3632 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3634 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3635 deliberately return non-zero to setjmp from longjmp. Otherwise
3636 this code fails to compile.
3638 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3640 * m68k-dis.c: Fix prototype for fetch_arg().
3642 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3644 * dis-buf.c: New file, for new read_memory_func interface.
3645 Makefile.in (OFILES): Include it.
3646 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3647 Use new read_memory_func interface.
3649 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3651 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3652 * h8500-opc.h: Fix couple of opcodes.
3654 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3656 * Makefile.in: add dvi & installcheck targets
3658 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3660 * Makefile.in: Update for h8500-dis.c.
3662 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3664 * h8500-dis.c, h8500-opc.h: New files
3666 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3668 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3669 ../include/dis-asm.h.
3670 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3671 and ../gdb/m68k-pinsn.c).
3672 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3673 and ../gdb/i386-pinsn.c).
3674 * m68881-ext.c: New file. Moved definition of
3675 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3676 * Makefile.in: Adjust for new files.
3677 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3678 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3679 can be dis-assembled.
3681 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3683 * mips-dis.c (print_insn_arg): Now returns void.
3685 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3687 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3688 files that use the macros.
3690 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3692 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3693 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3694 (CFILES): Added mips-dis.c.
3696 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3698 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3699 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3701 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3703 * Makefile.in: Improve *clean rules.
3704 * configure.in: Allow a default host.
3706 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3708 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3709 files include other sysdep files
3711 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3713 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3715 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3717 * configure.in: For host support, use ../bfd/configure.host
3718 so it stays in sync with the ../bfd/hosts database.
3720 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3722 * configure.in: use cpu-vendor-os triple instead of nested cases
3724 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3726 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3727 *always* the wrong one.
3729 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3731 * z8kgen.c: added copyright info
3733 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3735 * z8k-dis.c (unparse_instr): prettier tabs
3736 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3738 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3740 * configure.in: Add ncr* configuration.
3741 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3742 picayune ANSI compilers happy.
3744 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3746 * configure.in (i386): Make i386 and i486 synonymous for now.
3747 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3749 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3751 * Makefile.in (install): Fix typo.
3753 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3755 * Makefile.in (make): Remove obsolete crud.
3756 (sparc-opc.o): Avoid Sun Make VPATH bug.
3758 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3760 * Makefile.in: since there are no SUBDIRS, remove rule and
3761 references of subdir_do.
3763 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3765 * Makefile.in (install): Get the library name right here too.
3766 Don't install bfd.h, since it's unrelated to this library. No
3767 subdirs to recurse into, either.
3768 (CFILES): The source file has a .c suffix, not .o.
3770 * sparc-opc.c: New file, moved from BFD.
3771 * Makefile.in (OFILES): Build it.
3773 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3775 * z8k-dis.c: fixed forward refferences of some declarations.
3777 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3779 * Makefile.in: get the name of the library right
3781 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3783 * z8k-dis.c: knows how to disassemble z8k stuff
3784 * z8k-opc.h: new file full of z8000 opcodes
3788 version-control: never
projects / external / binutils.git / blob