1 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
3 * i386-dis.c (twobyte_has_modrm): Fix pand.
5 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
7 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
9 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
11 * arm-dis.c: Add prototypes for arm_decode_shift and
14 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
16 * mips-opc.c: Add r3900 insns.
18 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
20 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
21 print delay slot instructions on the same line. When using a PC
22 relative load, add a comment with the value being loaded if it can
25 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
27 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
28 to pushS/popS for segment regs and byte constant so that
29 pushw/popw printed when in 16 bit data mode.
31 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
32 print cbtw, cwtd in 16 bit data mode.
33 * i386-dis.c (putop): extra case W to support above.
35 * i386-dis.c (print_insn_x86): print addr32 prefix when given
36 address size prefix in 16 bit address mode.
38 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
40 * sh-dis.c: Reindent. Rename local variable fprintf to
43 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
45 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
47 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
49 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
51 * mips16-opc.c (mip16_opcodes): same.
53 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
55 * m68k-opc.c (moveb): Change $d to %d.
57 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
59 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
60 (twobyte_has_modrm): Likewise.
62 (OP_MMX, OP_EM, OP_MS): New static functions.
64 * i386-dis.c: Revert patch of April 4. The output now matches
67 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
69 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
72 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
74 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
76 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
78 * Makefile.in (install): Depend upon installdirs.
79 (installdirs): New target.
81 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
83 From Thomas Graichen <graichen@rzpd.de>:
84 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
87 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
89 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
90 Delete string{,s}.h support.
92 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
94 * cgen-asm.c (cgen_parse_operand_fn): New global.
95 (cgen_parse_{{,un}signed_integer,address}): Update call to
96 cgen_parse_operand_fn.
97 (cgen_init_parse_operand): New function.
98 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
99 from cgen_asm_init_parse.
100 (m32r_cgen_assemble_insn): New operand `errmsg'.
101 Delete call to as_bad, return error message to caller.
102 (m32r_cgen_asm_hash_keywords): #if 0 out.
104 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
106 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
108 [case 'J']: Fix typo in register name.
110 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
112 * configure.in: Substitute SHLIB_LIBS.
113 * configure: Rebuild.
114 * Makefile.in (SHLIB_LIBS): New variable.
115 ($(SHLIB)): Use $(SHLIB_LIBS).
117 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
119 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
121 * cgen-opc.c (hash_keyword_name): Improve algorithm.
123 * disassemble.c (disassembler): Handle m32r.
125 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
127 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
128 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
129 * Makefile.in (CFILES): Add them.
130 (ALL_MACHINES): Add them.
131 (dependencies): Regenerate.
132 * configure.in (cgen_files): New variable.
133 (bfd_m32r_arch): Add entry.
134 * configure: Regenerate.
136 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
138 * configure.in: Correct file names for bfd_mn10[23]00_arch.
139 * configure: Rebuild.
141 * Makefile.in: Rebuild dependencies.
143 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
145 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
148 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
150 * Branched binutils 2.8.
152 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
154 * m10200-dis.c: Rename from mn10200-dis.c.
155 * m10200-opc.c: Rename from mn10200-opc.c.
156 * m10300-dis.c: Rename from mn10300-dis.c
157 * m10300-opc.c: Rename from mn10300-opc.c.
158 * Makefile.in: Update accordingly.
160 * mips16-opc.c: Add mul and dmul macros.
162 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
164 * makefile.vms: Update CFLAGS, add clean target.
166 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
168 * mips-opc.c: Add "wait". From Ralf Baechle
169 <ralf@gnu.ai.mit.edu>.
171 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
172 * configure, config.in: Rebuild.
173 * sysdep.h: Include <stdlib.h> if it exists.
174 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
176 * Makefile.in: Rebuild dependencies.
178 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
180 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
181 Andrew Bray <andy@madhouse.demon.co.uk>.
183 * mips-opc.c: Add cast when setting mips_opcodes.
186 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
188 * v850-dis.c (disassemble): Fix sign extension problem.
189 * v850-opc.c (extract_d*): Fix sign extension problems to make
190 disassembly calculate branch offsets correctly.
193 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
195 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
197 * mips-opc.c: Add dctr and dctw.
200 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
202 * d30v-dis.c (print_insn): Change the way signed constants
205 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
207 * Makefile.in (BFD_H): New variable.
208 (HFILES): New variable.
209 (CFILES): Add all C files.
210 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
211 Delete old dependencies, and build new ones.
212 * dep-in.sed: New file.
214 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
216 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
218 start-sanitize-coldfire
219 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
221 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
224 end-sanitize-coldfire
225 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
227 * mn10200-opc.c: Change "trap" to "syscall".
228 * mn10300-opc.c: Add new "syscall" instruction.
230 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
232 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
233 mulul insns on the coldfire.
235 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
237 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
238 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
239 (print_insn_little_arm): Likewise.
241 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
243 Based on patches from H.J. Lu <hjl@lucon.org>:
244 * i386-dis.c (fetch_data): Add prototype.
245 * m68k-dis.c (fetch_data): Add prototype.
246 (dummy_print_address): Add prototype. Make static.
247 * ppc-opc.c (valid_bo): Add prototype.
248 * sparc-dis.c (build_hash_table): Add prototype.
249 (is_delayed_branch, compute_arch_mask): Add prototypes.
250 (print_insn_sparc): Make several local variables const.
251 (compare_opcodes): Change arguments to const PTR. Add prototype.
252 * sparc-opc.c (arg): Change name field to be const.
253 (lookup_name, lookup_value): Add prototypes. Change table and
254 name parameters to be const.
255 (sparc_encode_asi): Change name parameter to be const.
256 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
257 (sparc_encode_sparclet_cpreg): Likewise.
258 (sparc_decode_asi): Change return type to be const.
259 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
260 (sparc_decode_sparclet_cpreg): Likewise.
262 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
264 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
265 Solaris doesn't like the combined options, and the -f is
267 (stamp-tshlink, install): Likewise.
269 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
271 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
274 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
276 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
278 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
280 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
283 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
285 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
288 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
290 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
292 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
294 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
297 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
299 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
300 floatformat_to_double to make portable.
301 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
304 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
306 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
307 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
309 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
311 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
312 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
315 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
317 * tic80-opc.c (LSI_SCALED): Renamed from this ...
318 (OFF_SL_BR_SCALED): ... to this, and added the flag
319 TIC80_OPERAND_BASEREL to the flags word.
320 (tic80_opcodes): Replace all occurances of LSI_SCALED with
324 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
326 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
327 Change mips_opcodes from const array to a pointer,
328 and change bfd_mips_num_opcodes from const int to int,
329 so that we can increase the size of the mips opcodes table
333 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
335 * tic80-opc.c (tic80_predefined_symbols): Revert change to
336 store BITNUM values in the table in one's complement form
337 to match behavior when assembler is given a raw numeric
338 value for a BITNUM operand.
339 * tic80-dis.c (print_operand_bitnum): Ditto.
343 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
345 * d30v-opc.c: Removed references to FLAG_X.
348 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
350 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
353 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
355 * Makefile.in: Added d30v object files.
356 * configure: (bfd_d30v_arch) Rebuilt.
357 * configure.in: (bfd_d30v_arch) Added new case.
358 * d30v-dis.c: New file.
359 * d30v-opc.c: New file.
360 * disassemble.c (disassembler) Add entry for d30v.
364 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
366 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
367 representations for the floating point BITNUM values.
369 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
371 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
372 in the table in one's complement form, as they appear in the
374 (tic80_symbol_to_value): Use macros to access predefined
376 (tic80_value_to_symbol): Ditto.
377 (tic80_next_predefined_symbol): New function.
378 * tic80-dis.c (print_operand_bitnum): Remove code that did
379 one's complement for BITNUM values.
383 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
385 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
388 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
390 * makefile.vms: Remove 8 bit characters. Update to latest
393 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
395 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
397 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
399 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
400 (IMM24_PCREL): Likewise.
402 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
404 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
405 address for an extended PC relative instruction that is not a
408 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
410 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
414 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
416 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
417 (tic80_opcodes): Sort entries so that long immediate forms
418 come after short immediate forms, making it easier for
419 assembler to select the right one for a given operand.
422 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
424 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
426 (print_insn_mips16): Likewise.
429 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
431 * mips-opc.c: add r5900.
435 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
437 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
438 a symbol class that restricts translation to just that
439 class (general register, condition code, etc).
441 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
443 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
444 and REG_DEST_E for register operands that have to be
445 an even numbered register. Add REG_FPA for operands that
446 are one of the floating point accumulator registers.
447 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
448 (tic80_opcodes): Change entries that need even numbered
449 register operands to use the new operand table entries.
450 Add "or" entries that are identical to "or.tt" entries.
453 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
455 * mips16-opc.c: Add new cases of exit instruction for
457 * mips-dis.c (print_mips16_insn_arg): Display floating point
458 registers in operands of exit instruction. Print `$' before
459 register names in operands of entry and exit instructions.
462 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
464 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
465 pairs for all predefined symbols recognized by the assembler.
466 Also used by the disassembling routines.
467 (tic80_symbol_to_value): New function.
468 (tic80_value_to_symbol): New function.
469 * tic80-dis.c (print_operand_control_register,
470 print_operand_condition_code, print_operand_bitnum):
471 Remove private tables and use tic80_value_to_symbol function.
474 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
476 * d10v-dis.c (print_operand): Change address printing
477 to correctly handle PC wrapping. Fixes PR11490.
479 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
481 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
484 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
486 * mips-dis.c (print_insn_mips16): Set insn_info information.
487 (print_mips16_insn_arg): Likewise.
489 * mips-dis.c (print_insn_mips16): Better handling of an extend
490 opcode followed by an instruction which can not be extended.
492 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
494 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
495 coldfire moveb instruction to not allow an address register as
496 destination. Although the documentation does not indicate that
497 this is invalid, experiments uncovered unexpected behavior.
498 Added a comment explaining the situation. Thanks to Andreas
499 Schwab for pointing this out to me.
502 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
504 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
505 entries are presorted so that entries with the same mnemonic are
506 adjacent to each other in the table. Sort the entries for each
507 instruction so that this is true.
510 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
512 * m68k-dis.c: Include <libiberty.h>.
513 (print_insn_m68k): Sort the opcode table on the most significant
514 nibble of the opcode.
517 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
519 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
520 "vsub", "vst", "xnor", and "xor" instructions.
521 (V_a1): Renamed from V_a, msb of accumulator reg number.
522 (V_a0): Add macro, lsb of accumulator reg number.
524 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
526 * tic80-dis.c (print_insn_tic80): Broke excessively long
527 function up into several smaller ones and arranged for
528 the instruction printing function to be callable recursively
529 to print vector instructions that have both a load and a
530 math instruction packed into a single opcode.
531 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
532 to explain why it comes after the other vector opcodes.
535 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
537 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
538 move insns to handle immediate operands.
540 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
542 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
543 fix operand mask in the "moveml" entries for the coldfire.
546 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
548 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
549 New macros for building vector instruction opcodes.
550 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
551 FMT_LI, which were unused. The field is now a flags field.
552 Remove some opcodes that are possible, but illegal, such
553 as long immediate instructions with doubles for immediate
554 values. Add "vadd" and "vld" instructions.
556 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
558 * tic80-opc.c (tic80_operands): Reorder some table entries to make
559 the order more logical. Move the shift alias instructions ("rotl",
560 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
561 interspersed with the regular sr.x and sl.x instructions. Add
562 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
563 "sub", "subu", "swcr", and "trap".
565 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
567 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
568 (OFF_SL_PC): Renamed from OFF_SL.
569 (OFF_SS_BR): New operand type for base relative operand.
570 (OFF_SL_BR): New operand type for base relative operand.
571 (REG_BASE): New operand type for base register operand.
572 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
573 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
574 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
576 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
577 10 char field, padded with spaces on rhs, rather than a string
578 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
579 than old TIC80_OPERAND_RELATIVE. Add support for new
580 TIC80_OPERAND_BASEREL flag bit.
582 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
584 * tic80-dis.c (print_insn_tic80): Print floating point operands
586 * tic80-opc.c (SPFI): Add single precision floating point
587 immediate operand type.
588 (ROTATE): Add rotate operand type for shifts.
589 (ENDMASK): Add for shifts.
590 (n): Macro for the 'n' bit.
591 (i): Macro for the 'i' bit.
592 (PD): Macro for the 'PD' field.
593 (P2): Macro for the 'P2' field.
594 (P1): Macro for the 'P1' field.
595 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
599 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
601 * mn10200-dis.c (disassemble): Mask off unwanted bits after
602 adding in current address for pc-relative operands.
605 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
607 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
608 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
609 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
610 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
611 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
612 REG_BASE_M_SI, REG_BASE_M_LI respectively.
613 (REG_SCALED, LSI_SCALED): New operand types.
614 (E): New macro for 'E' bit at bit 27.
615 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
616 opcodes, including the various size flavors (b,h,w,d) for
617 the direct load and store instructions.
619 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
621 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
623 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
624 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
625 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
626 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
627 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
628 masks with "MASK_* & ~M_*" to get the M bit reset.
629 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
631 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
633 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
634 correctly. Add support for printing TIC80_OPERAND_BITNUM and
635 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
637 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
638 CC, SICR, and LICR table entries.
639 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
640 "bcnd", and "brcr" opcodes.
643 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
645 * ppc-opc.c (powerpc_operands): Make comment match the
646 actual fields (no shift field).
647 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
649 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
650 partial implementation, work in progress.
651 * tic80-opc.c (tic80_operands): Begin construction operands table.
652 (tic80_opcodes): Continue populating opcodes table and start
653 filling in the operand indices.
654 (tic80_num_opcodes): Add this.
657 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
659 * m68k-opc.c: Add #B case for moveq.
661 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
663 * mn10300-dis.c (disassemble): Make sure all variables are initialized
664 before they are used.
667 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
669 * v850-opc.c (v850_opcodes): Put curly-braces around operands
670 for "breakpoint" instruction.
673 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
675 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
676 (dep): Use ALL_CFLAGS rather than CFLAGS.
679 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
681 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
685 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
687 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
689 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
692 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
694 * mips16-opc.c: Add "abs".
697 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
699 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
700 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
701 (disassembler): Add bfd_arch_tic80 support to set disassemble
703 * tic80-dis.c (print_insn_tic80): Add stub.
705 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
707 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
708 * configure: Regenerate with autoconf.
709 * tic80-dis.c: Add file.
710 * tic80-opc.c: Add file.
713 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
715 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
717 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
719 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
720 (mn10200_opcodes): Use it for some logicals and btst insns.
721 Add "break" and "trap" instructions.
723 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
725 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
727 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
729 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
730 relative load or add now depends upon whether the instruction is
733 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
735 * mn10200-dis.c: Finish writing disassembler.
736 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
737 Fix mask for "jmp (an)".
739 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
740 handle endianness issues for mn10300.
742 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
744 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
746 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
747 instruction. Fix opcode field for "movb (imm24),dn".
749 * mn10200-opc.c (mn10200_operands): Fix insertion position
752 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
754 * mn10200-opc.c: Create mn10200 opcode table.
755 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
756 but moving along nicely.
758 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
760 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
762 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
764 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
765 specifiers for fmovem* instructions.
767 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
769 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
771 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
773 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
776 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
778 * mn10300-opc.c: Add some comments explaining the various
781 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
783 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
785 * m68k-dis.c (print_insn_arg): Handle new < and > operand
788 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
789 operand specifiers in fmovm* instructions.
791 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
793 * ppc-opc.c (insert_li): Give an error if the offset has the two
794 least significant bits set.
796 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
798 * mips-dis.c (print_insn_mips16): Separate the instruction from
799 the arguments with a tab, not a space.
801 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
803 * mn10300-dis.c (disasemble): Finish conversion to '$' as
806 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
809 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
811 * configure: Rebuild with autoconf 2.12.
813 Add support for mips16 (16 bit MIPS implementation):
814 * mips16-opc.c: New file.
815 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
816 (mips16_reg_names): New static array.
817 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
818 after seeing a 16 bit symbol.
819 (print_insn_little_mips): Likewise.
820 (print_insn_mips16): New static function.
821 (print_mips16_insn_arg): New static function.
822 * mips-opc.c: Add jalx instruction.
823 * Makefile.in (mips16-opc.o): New target.
824 * configure.in: Use mips16-opc.o for bfd_mips_arch.
825 * configure: Rebuild.
827 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
829 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
830 operand specifiers in *save, *restore and movem* instructions.
832 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
835 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
836 register operands for immediate arithmetic, not, neg, negx, and
837 set according to condition instructions.
839 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
840 specifier of the effective-address operand in immediate forms of
841 arithmetic instructions. The specifier for the immediate operand
842 notes how and where the constant will be stored.
844 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
846 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
849 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
852 * mn10300-dis.c (disassemble): Prefix registers with '%'.
854 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
856 * mn10300-dis.c (disassemble): Handle register lists.
858 * mn10300-opc.c: Fix handling of register list operand for
859 "call", "ret", and "rets" instructions.
861 * mn10300-dis.c (disassemble): Print PC-relative and memory
862 addresses symbolically if possible.
863 * mn10300-opc.c: Distinguish between absolute memory addresses,
864 pc-relative offsets & random immediates.
866 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
868 (disassemble): Handle SPLIT and EXTENDED operands.
870 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
872 * mn10300-dis.c: Rough cut at printing some operands.
874 * mn10300-dis.c: Start working on disassembler support.
875 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
877 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
879 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
881 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
883 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
885 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
887 * mn10300-opc.c (mn10300_opcodes): Demand parens around
888 register argument is calls and jmp instructions.
890 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
892 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
893 getx operand. Fix opcode for mulqu imm,dn.
895 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
897 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
898 in MN10300_OPERAND_SPLIT operands for how many bits
899 appear in the basic insn word. Add IMM32_HIGH24,
900 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
901 (mn10300_opcodes): Use new operands as needed.
903 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
904 for bset, bclr, btst instructions.
905 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
907 * mn10300-opc.c (mn10300_operands): Remove many redundant
908 operands. Update opcode table as appropriate.
909 (IMM32): Add MN10300_OPERAND_SPLIT flag.
910 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
912 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
914 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
915 operands (for indexed load/stores). Fix bitpos for DI
916 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
917 few instructions that insert immediates/displacements in the
918 middle of the instruction. Add IMM8E for 8 bit immediate in
919 the extended part of an instruction.
920 (mn10300_operands): Use new opcodes as appropriate.
922 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
924 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
925 sequential so the assembler never parallelizes it with
928 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
930 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
931 a data/address register that appears in register field 0
932 and register field 1.
933 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
935 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
937 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
938 standard disassembly.
940 * alpha-opc.c (alpha_operands): Rearrange flags slot.
941 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
942 Recategorize PALcode instructions.
945 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
947 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
950 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
952 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
953 there are no operand types.
956 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
958 * v850-opc.c (D9_RELAX): Renamed from D9, all references
960 (v850_operands): Make sure D22 immediately follows D9_RELAX.
963 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
965 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
968 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
970 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
971 and sst.w instructions.
973 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
977 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
979 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
982 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
984 * ppc-opc.c (PPCPWR2): Define.
985 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
988 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
990 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
991 field for movhu instruction.
994 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
995 cast value to "long" not "signed long" to keep hpux10
999 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1001 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1004 * mn10300-opc.c (FMT*): Remove definitions.
1006 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1007 for shift-by-register opcodes.
1009 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1010 into [AD][MN][01] for encoding the position of the register
1013 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1015 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1016 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1018 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1020 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1021 Fix various typos. Add "PAREN" operand.
1022 (MEM, MEM2): Define.
1023 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1024 operands. Fix several typos.
1026 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1029 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1031 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1032 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1034 (mn10300_opcodes): Break opcode format out into its own field.
1035 Update many operand fields to deal with signed vs unsigned
1036 issues. Fix one or two typos in the "mov" instruction
1037 opcode, mask and/or operand fields.
1039 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1041 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1042 m68851 wasn't reset.
1044 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1046 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1047 all opcodes. Very rough cut at operands for all opcodes.
1049 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1052 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1054 * mn10200-opc.c, mn10300-opc.c: New files.
1055 * mn10200-dis.c, mn10300-dis.c: New files.
1056 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1057 * disassemble.c: Break mn10x00 support into 10200 and 10300
1059 * configure.in: Likewise.
1060 * configure: Rebuilt.
1062 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1064 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1066 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1068 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1070 * disassemble (ARCH_mn10x00): Define.
1071 (disassembler): Handle bfd_arch_mn10x00.
1072 * configure.in: Recognize bfd_mn10x00_arch.
1073 * configure: Rebuilt.
1075 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1077 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1078 accordingly. Don't declare functions using op_rtn.
1081 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1083 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1084 params to be more standard.
1085 * (disassemble): Print absolute addresses and symbolic names for
1086 branch and jump targets.
1087 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1089 * (v850_opcodes): Add breakpoint insn.
1092 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1094 * m68k-opc.c: Move the fmovemx data register cases before the
1095 other cases, so that they get recognized before the data register
1096 does gets treated as a degenerate register list.
1098 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1100 * mips-opc.c: Add a case for "div" and "divu" with two registers
1101 and a destination of $0.
1103 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1105 * mips-dis.c (print_insn_arg): Add prototype.
1106 (_print_insn_mips): Ditto.
1108 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1110 * mips-dis.c (print_insn_arg): Print condition code registers as
1113 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1115 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1118 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1120 * v850-dis.c (disassemble): Make static. Provide prototype.
1122 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1124 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1127 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1129 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1130 ']' characters into the output stream.
1131 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1132 Add "memop" field to all opcodes (for the disassembler).
1133 Reorder opcodes so that "nop" comes before "mov" and "jr"
1134 comes before "jarl".
1136 * v850-dis.c (print_insn_v850): Fix typo in last change.
1138 * v850-dis.c (print_insn_v850): Properly handle disassembling
1139 a two byte insn at the end of a memory region when the memory
1140 region's size is only two byte aligned.
1142 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1144 * v850-dis.c (v850_reg_names): Define.
1145 (v850_sreg_names, v850_cc_names): Likewise.
1146 (disassemble): Very rough cut at printing operands (unformatted).
1148 * v850-opc.c (BOP_MASK): Fix.
1149 (v850_opcodes): Fix mask for jarl and jr.
1151 * v850-dis.c: New file. Skeleton for disassembler support.
1152 * Makefile.in Remove v850 references, they're not needed here
1153 and they weren't being sanitized away.
1154 * configure.in: Add v850-dis.o when building v850 toolchains.
1155 * configure: Rebuilt.
1156 * disassemble.c (disassembler): Call v850 disassembler.
1158 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1159 (insert_d8_6, extract_d8_6): New functions.
1160 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1161 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1163 (IF4A, IF4B): Use "D7" instead of "D7S".
1164 (IF4C, IF4D): Use "D8_7" instead of "D8".
1165 (IF4E, IF4F): New. Use "D8_6".
1166 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1167 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1169 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1170 (v850_operands): Change D16 to D16_15, use special insert/extract
1171 routines. New new D16 that uses the generic insert/extract code.
1172 (IF7A, IF7B): Use D16_15.
1173 (IF7C, IF7D): New. Use D16.
1174 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1176 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1177 message. Issue an error if the branch offset is odd.
1179 * v850-opc.c: Add notes about needing special insert/extract
1180 for all the load/store insns, except "ld.b" and "st.b".
1182 * v850-opc.c (insert_d22, extract_d22): New functions.
1183 (v850_operands): Use insert_d22 and extract_d22 for
1185 (insert_d9): Fix range check.
1187 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1189 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1190 and set bits field to D9 and D22 operands.
1192 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1194 * v850-opc.c (v850_operands): Define SR2 operand.
1195 (v850_opcodes): "ldsr" uses R1,SR2.
1197 * v850-opc.c (v850_opcodes): Fix opcode specs for
1198 sld.w, sst.b, sst.h, sst.w, and nop.
1200 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1202 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1203 end of the opcode table.
1206 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1208 * d10v-opc.c (pre_defined_registers): Added register pairs,
1209 "r0-r1", "r2-r3", etc.
1212 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1214 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1215 Create I16U for an unsigned 16bit mmediate operand.
1216 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1218 * v850-opc.c (v850_operands): Define EP operand.
1219 (IF4A, IF4B, IF4C, IF4D): Use EP.
1221 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1222 with immediate operand, "movhi". Tweak "ldsr".
1224 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1225 correct. Get sld.[bhw] and sst.[bhw] closer.
1227 * v850-opc.c (v850_operands): "not" is a two byte insn
1229 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1231 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1233 * v850-opc.c (two): Get order of words correct.
1235 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1237 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1238 register source and destination operands.
1239 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1241 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1242 same thinko in "trap" opcode.
1244 * v850-opc.c (v850_opcodes): Add initializer for size field
1247 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1248 Add D8 for 8-bit unsigned field in short load/store insns.
1249 (IF4A, IF4D): These both need two registers.
1250 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1251 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1252 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1253 for "ldsr" and "stsr".
1254 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1257 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1258 short store word (sst.w).
1260 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1262 * v850-opc.c (v850_operands): Added insert and extract fields,
1263 pointers to functions that handle unusual operand encodings.
1265 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1267 * v850-opc.c (v850_opcodes): Enable "trap".
1269 * v850-opc.c (v850_opcodes): Fix order of displacement
1270 and register for "set1", "clr1", "not1", and "tst1".
1272 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1274 * v850-opc.c (v850_operands): Add "B3" support.
1275 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1278 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1280 * v850-opc.c: Close unterminated comment.
1282 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1284 * v850-opc.c (v850_operands): Add flags field.
1285 (v850_opcodes): add move opcodes.
1287 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1289 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1290 * configure: (bfd_v850v_arch) Add new case.
1291 * configure.in: (bfd_v850_arch) Add new case.
1292 * v850-opc.c: New file.
1295 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1297 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1299 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1301 * d10v-opc.c: Add additional information to the opcode
1302 table to help determinine which instructions can be done
1305 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1307 * mpw-make.sed: Update editing of include pathnames to be
1310 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1312 * arm-opc.h: Added "bx" instruction definition.
1314 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1316 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1318 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1320 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1322 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1324 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1326 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1328 * makefile.vms: Update for alpha-opc changes.
1330 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1332 * i386-dis.c (print_insn_i386): Actually return the correct value.
1333 (ONE, OP_ONE): #ifdef out; not used.
1335 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1337 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1338 Changed subi operand type to treat 0 as 16.
1340 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1342 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1345 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1347 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1348 memory transfer instructions. Add new format string entries %h and %s.
1349 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1352 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1354 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1355 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1357 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1359 * alpha-dis.c (print_insn_alpha_osf): Remove.
1360 (print_insn_alpha_vms): Remove.
1361 (print_insn_alpha): Make globally visible. Chose the register
1362 names based on info->flavour.
1363 * disassemble.c: Always return print_insn_alpha for the alpha.
1365 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1367 * d10v-dis.c (dis_long): Handle unknown opcodes.
1369 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1371 * d10v-opc.c: Changes to support signed and unsigned numbers.
1372 All instructions with the same name that have long and short forms
1373 now end in ".l" or ".s". Divs added.
1374 * d10v-dis.c: Changes to support signed and unsigned numbers.
1376 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1378 * d10v-dis.c: Change all functions to use info->print_address_func.
1380 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1382 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1383 move ccr/sr insns more strict so that the disassembler only
1384 selects them when the addressing mode is data register.
1386 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1387 * d10v-opc.c (pre_defined_registers): Declare.
1388 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1389 to pick a better name for the registers.
1391 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1393 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1394 operands for fexpand and fpmerge. From Christian Kuehnke
1395 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1397 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1399 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1400 print routine. Take new regnames and cpumask arguments.
1401 Kill the environment variable nonsense.
1402 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1403 (print_insn_alpha_vms): New function. Do VMS style regnames.
1404 * disassemble.c (disassembler): Test bfd flavour to pick
1405 between OSF and VMS routines. Default to OSF.
1407 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1409 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1410 * configure: Rebuild.
1411 * Makefile.in (install): Use @INSTALL_SHLIB@.
1413 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1415 * configure: (bfd_d10v_arch) Add new case.
1416 * configure.in: (bfd_d10v_arch) Add new case.
1417 * d10v-dis.c: New file.
1418 * d10v-opc.c: New file.
1419 * disassemble.c (disassembler) Add entry for d10v.
1421 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1423 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1424 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1426 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1428 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1429 distinguish between variants of the instruction set.
1430 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1431 distinguish between variants of the instruction set.
1433 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1435 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1436 the 8086 instruction set.
1437 * i386-dis.c: General cleanups. Make most things static. Add
1438 prototypes. Get rid of static variables aflags and dflags. Pass
1439 them as args (to almost everything).
1441 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1443 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1445 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1447 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1448 if the next arg is marked with SRC_IN_DST. Gross.
1450 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1451 we're looking for and find EXR.
1453 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1454 if we're looking for KBIT and we don't find it.
1456 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1459 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1460 3bit immediate operands.
1462 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1464 * Released binutils 2.7.
1466 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1467 <kkaempf@progis.ac-net.de>.
1469 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1471 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1473 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1475 * sparc-dis.c (print_insn_sparclite): New routine to print
1476 sparclite instructions.
1478 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1480 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1482 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1484 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1485 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1486 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1488 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1490 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1491 Use autoconf-set values.
1492 (docdir, oldincludedir): Removed.
1493 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1495 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1497 * alpha-opc.c: New file.
1498 * alpha-opc.h: Remove.
1499 * alpha-dis.c: Complete rewrite to use new opcode table.
1500 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1501 * configure: Rebuild with autoconf 2.10.
1502 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1503 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1505 (alpha-opc.o): New target.
1507 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1509 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1510 Set imm_added_to_rs1 even if the source and destination register
1513 * sparc-opc.c: Add some two operand forms of the wr instruction.
1515 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1517 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1520 * disassemble.c (disassembler): Handle H8/S.
1521 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1523 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1525 * sparc-opc.c: Add beq/teq as aliases for be/te.
1527 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1528 <sergei@msil.sps.mot.com>.
1530 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1532 * makefile.vms: New file.
1534 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1536 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1538 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1541 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1543 * i386-dis.c (OP_OFF): Call append_prefix.
1545 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1547 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1548 unsigned long to silence a warning from the Solaris PowerPC
1551 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1553 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1555 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1557 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1559 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1560 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1561 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1562 cpush, cpusha, cpull sparclet insns.
1564 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1566 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1568 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1570 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1571 Set F_FLOAT on other floating point instructions.
1573 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1575 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1577 (powerpc_opcodes): Add 860/821 specific SPRs.
1579 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1581 * configure.in: Permit --enable-shared to specify a list of
1582 directories. Set and substitute BFD_PICLIST.
1583 * configure: Rebuild.
1584 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1585 uses. Set to @BFD_PICLIST@.
1587 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1589 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1590 not "abs", which may be needed for the absolute in something
1591 like btst #0,@10:8. Print L_3 immediates separately from other
1592 immediates. Change ABSMOV reference to ABS8MEM.
1594 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1596 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1597 (current_arch_mask): New static global.
1598 (compute_arch_mask): New static function.
1599 (print_insn_sparc): Delete sparc_v9_p. New static local
1600 current_mach. Resort opcode table if current_mach changes.
1601 Generalize "insn not supported" test.
1602 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1603 Delete test for v9/!v9.
1604 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1606 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1607 (brfcx): Renamed to FBRX.
1608 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1609 coprocessor mnemonics are not supported on the sparclet).
1610 (condf): Renamed to CONDF.
1611 (SLCBCC2): Delete F_ALIAS flag.
1613 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1615 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1616 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1618 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1620 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1621 that the shared library version number is set correctly.
1623 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1625 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1626 Miles Bader <miles@gnu.ai.mit.edu>.
1627 * configure: Rebuild.
1629 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1631 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1634 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1636 * configure: Rebuild with autoconf 2.8.
1638 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1640 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1641 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1643 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1645 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1646 since they appear as targets in Makefile.in.
1647 * configure: Rebuild.
1649 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1651 * mpw-make.sed: Edit out shared library support bits.
1653 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1655 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1656 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1657 (sparc_opcodes): Add sparclet insns.
1658 (sparclet_cpreg_table): New static local.
1659 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1660 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1662 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1664 * i386-dis.c (index16): New static variable.
1665 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1667 (OP_indirE): Return result of OP_E.
1668 (OP_E): Check for 16 bit addressing mode, and disassemble
1669 correctly. Optimised 32 bit case a little. Don't print
1670 "(base,index,scale)" when sib specifies only an offset.
1672 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1674 * configure.in: Set and substitute SHLIB_DEP.
1675 * configure: Rebuild.
1676 * Makefile.in (SHLIB_DEP): New variable.
1677 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1678 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1679 COMMON_SHLIB, add them to piclist with appropriate modifications.
1680 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1681 here: just use piclist.
1683 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1685 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1686 (print_insn_sparc): Rewrite v9/not-v9 tests.
1687 (compare_opcodes): Likewise.
1688 * sparc-opc.c (MASK_<ARCH>): Define.
1689 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1690 (sparclet,v6notv9): Define.
1691 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1692 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1694 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1696 * configure.in: Call AC_PROG_CC before configure.host.
1697 * configure: Rebuild.
1699 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1701 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1703 * i386-dis.c (onebyte_has_modrm): New static array.
1704 (twobyte_has_modrm): New static array.
1705 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1707 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1709 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1712 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1714 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1717 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1719 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1720 m68010up, not just m68020up | cpu32.
1722 * Makefile.in (SONAME): New variable.
1723 ($(SHLINK)): Make a link to the transformed name, as well.
1724 (stamp-tshlink): New target.
1725 (install): Skip stamp-tshlink during install.
1727 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1729 * configure.in: Call AC_ARG_PROGRAM.
1730 * configure: Rebuild.
1731 * Makefile.in (program_transform_name): New variable.
1732 (install): Transform library name before installing it.
1734 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1736 * i960-dis.c (mem): Add HX dcinva instruction.
1738 Support for building as a shared library, based on patches from
1739 Alan Modra <alan@spri.levels.unisa.edu.au>:
1740 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1741 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1742 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1743 * configure: Rebuild.
1744 * Makefile.in (ALLLIBS): New variable.
1745 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1746 (COMMON_SHLIB, SHLINK): New variables.
1747 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1748 (STAGESTUFF): Remove variable.
1749 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1750 (stamp-piclist, piclist): New targets.
1751 ($(SHLIB), $(SHLINK)): New targets.
1752 ($(OFILES)): Depend upon stamp-picdir.
1753 (disassemble.o): Build twice if PICFLAG is set.
1754 (MOSTLYCLEAN): Add pic/*.o.
1755 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1756 (distclean): Remove pic and stamp-picdir.
1757 (install): Install shared libraries.
1758 (stamp-picdir): New target.
1760 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1762 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1763 Print unknown instruction as "unknown", rather than in hex.
1765 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1767 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1769 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1771 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1773 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1775 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1776 when necessary. From Ulrich Drepper
1777 <drepper@myware.rz.uni-karlsruhe.de>.
1779 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1781 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1782 sparc_num_opcodes. Update architecture enum values.
1783 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1784 (sparc_opcode_lookup_arch): New function.
1785 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1786 (sparc_opcodes): Add v9a shutdown insn.
1788 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1790 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1791 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1793 (print_insn_sparc64): Deleted.
1794 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1797 * sparc-opc.c (architecture_pname): Add v9a.
1799 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1801 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1802 incorrectly defined as 0x16 when it should be 0x15.
1803 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1804 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1805 excb (exception barrier) which is defined in the Alpha
1806 Architecture Handbook version 2.
1807 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1808 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1809 disassembled as or, for example.
1811 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1813 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1814 (_print_insn_mips): Change i from int to unsigned int.
1816 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1818 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1819 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1821 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1823 * i386-dis.c: Added Pentium Pro instructions.
1825 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1827 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1830 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1832 * sh-opc.h (sh_nibble_type): Added REG_B.
1833 (sh_arg_type): Added A_REG_B.
1834 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1836 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1838 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1840 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1842 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1844 * Makefile.in (distclean): Remove stamp-h. From Ronald
1845 F. Guilmette <rfg@monkeys.com>.
1847 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1849 From David Mosberger-Tang <davidm@azstarnet.com>:
1850 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1853 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1855 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1856 (sh_table): Added many SH3 opcodes.
1857 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1859 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1861 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1862 (subco,subco.): Mark this PPC, not PPCCOM.
1864 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1866 * configure: Rebuild with autoconf 2.7.
1868 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1870 * configure: Rebuild with autoconf 2.6.
1872 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1874 * configure.in: Sort list of architectures. Accept but do nothing
1875 for alliant, convex, pyramid, romp, and tahoe.
1877 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1879 * a29k-dis.c (print_special): Change num to unsigned int.
1881 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1883 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1886 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1888 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1889 * configure: Rebuilt.
1891 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1893 * configure.in: Add case for bfd_i860_arch.
1894 * configure: Rebuild.
1896 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1898 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1899 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1900 (NEXTDOUBLE): Likewise.
1901 (print_insn_m68k): Don't match fmoveml if there is more than one
1902 register in the list.
1903 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1905 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1907 * m68k-opc.c: Use #W rather than #w.
1908 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1910 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1912 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1913 and likewise for all the dbxx opcodes.
1915 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1917 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1919 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1921 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1922 the VR4100 specific instructions to the mips_opcodes structure.
1924 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1926 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1927 ugly Metrowerks bug in CW6, is fixed in CW7.
1929 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1931 * ppc-opc.c (whole file): Add flags for common/any support.
1933 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1935 * Makefile.in (BISON): Remove macro.
1936 (FLAGS_TO_PASS): Remove BISON.
1938 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1940 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1942 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1943 instructions that take no args by looking at the match mask.
1944 (print_insn_arg): Always print "%" before register names.
1945 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1946 [case '_']: Don't print "@#" before address.
1947 [case 'J']: Use "%s" as format string, not register name.
1948 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1950 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1952 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1955 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1957 From David Mosberger-Tang <davidm@azstarnet.com>
1959 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1960 (alpha_insn_set): added definitions for VAX floating point
1961 instructions (Unix compilers don't generate these, but handcoded
1962 assembly might still use them).
1964 * alpha-dis.c (print_insn_alpha): added support for disassembling
1965 the miscellaneous instructions in the Alpha instruction set.
1967 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1969 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1970 no longer create sysdep.h, sed ppc-opc.c to work around a
1971 serious Metrowerks C bug.
1972 * mpw-make.in: Remove.
1973 * mpw-make.sed: New file, used by mpw-configure to edit
1974 Makefile.in into an MPW makefile.
1976 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1978 * Makefile.in (maintainer-clean): New synonym for realclean.
1980 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1982 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1983 which use '0', '1', and '2' instead. Specify the proper size for
1984 a pmove immediate operand. Correct the pmovefd patterns to be
1985 moves to a register, not from a register.
1986 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1988 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1990 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1991 %psr, %wim, %tbr as F_NOTV9.
1993 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1995 * Makefile.in (Makefile): Just rebuild Makefile when running
1997 (config.h, stamp-h): New targets.
1998 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1999 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2000 rebuilding config.h.
2001 * configure: Rebuild.
2003 * mips-opc.c: Change unaligned loads and stores with "t,A"
2004 operands to use "t,A(b)".
2006 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2008 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2010 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2012 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2013 until 3 instead of until 2.
2015 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2017 * Makefile.in (ALL_CFLAGS): Define.
2018 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2019 (MOSTLYCLEAN): Add config.log.
2020 (distclean): Don't remove config.log.
2021 * configure.in: Substitute HDEFINES.
2022 * configure: Rebuild.
2024 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2026 * sh-opc.h (sh_arg_type): Add F_FR0.
2027 (sh_table, case fmac): Add F_FR0 as first argument.
2029 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2031 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2033 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2035 * sparc-dis.c: Remove all references to NO_V9.
2037 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2039 * aclocal.m4: Just include ../bfd/aclocal.m4.
2040 * configure: Rebuild.
2042 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2044 * sparc-dis.c (X_DISP19): Define.
2045 (print_insn, case 'G'): Use it.
2046 (print_insn, case 'L'): Sign extend displacement.
2048 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2050 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2051 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2052 host_makefile_frag or frags.
2053 * aclocal.m4: New file.
2054 * configure: Rebuild.
2055 * Makefile.in (INSTALL): Set to @INSTALL@.
2056 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2057 (INSTALL_DATA): Set to @INSTALL_DATA@.
2059 (AR_FLAGS): Set to rc rather than qc.
2060 (CC): Define as @CC@.
2061 (CFLAGS): Set to @CFLAGS@.
2062 (@host_makefile_frag@): Remove.
2063 (config.status): Remove dependency upon @frags@.
2065 * configure.in: ../bfd/config.bfd now just sets shell variables.
2066 Use them rather than looking through target Makefile fragments.
2067 * configure: Rebuild.
2069 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2071 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2073 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2075 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2076 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2079 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2080 (lookup_{name,value}): New functions.
2081 (prefetch_table): New static local.
2082 (sparc_{encode,decode}_prefetch): New functions.
2083 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2085 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2087 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2090 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2092 * sh-dis.c: Correct comment on first line of file.
2094 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2096 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2098 * sparc-opc.c (asi, membar): New static locals.
2099 (sparc_{encode,decode}_{asi,membar}): New functions.
2100 (sparc_opcodes, membar insn): Fix.
2101 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2102 Support decoding of membar masks.
2105 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2107 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2109 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2111 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2112 and likewise for the other branches. Add bhs as an alias for bcc,
2113 and likewise for the size variants. Add dbhs as an alias for
2116 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2118 * sh-opc.h (FP sts instructions): Update to match reality.
2120 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2122 * m68k-dis.c: (fpcr_names): Add % before all register names.
2123 (reg_names): Likewise.
2124 (print_insn_arg): Don't explicitly print % before register names.
2125 Add % before register names in static array names. In case 'r',
2126 print data registers as `@(Dn)', not `Dn@'. When printing a
2127 memory address, don't print @# before it.
2128 (print_indexed): Change base_disp and outer_disp from int to
2129 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2130 syntax. Sign extend 8 byte displacement correctly.
2131 (print_base): Print using MIT syntax. Print zpc when appropriate.
2132 Change parameter disp from int to bfd_vma.
2134 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2137 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2139 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2140 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2141 * sh-opc.h (sh_arg_type): Add new operand types.
2142 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2144 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2146 * Makefile.in (distclean): Remove generated file config.h.
2148 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2150 * Makefile.in (distclean): Remove generated file config.h.
2152 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2154 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2156 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2158 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2159 rather than numopcodes. Use m68k_opcodes rather than removed
2160 opcode function. Don't check F_ALIAS.
2161 (print_insn_arg): Change first parameter to be const char *.
2162 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2163 (m68k-opc.o): New target.
2164 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2165 * configure: Rebuild.
2167 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2169 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2170 (opcode_bits, opcode_hash_table): New variables.
2171 (opcodes_initialized): Renamed from opcodes_sorted.
2172 (build_hash_table): New function.
2173 (is_delayed_branch): Use hash table.
2174 (print_insn): Renamed from print_insn_sparc, made static.
2175 Build and use hash table. If !sparc64, ignore sparc64 insns,
2176 and vice-versa if sparc64.
2177 (print_insn_sparc, print_insn_sparc64): New functions.
2178 (compare_opcodes): Move sparc64 opcodes to end.
2179 Print commutative insns with constant second.
2180 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2182 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2184 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2185 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2186 avoids printing a delay slot in a delay slot.
2187 * sh-opc.h (sh_table): Fully bracket last entry.
2189 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2191 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2193 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2195 * configure.in: Get host_makefile_frag from ${srcdir}.
2197 * configure.in: Autoconfiscated. Check for string[s].h. Create
2198 config.h from config.in. Don't set up sysdep.h link.
2199 * sysdep.h: New file.
2200 * configure, config.in: New files, generated from configure.in.
2201 * Makefile.in: Updated to be processed autoconf-style.
2202 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2203 (Makefile): Depend on config.status.
2204 (config.status): New rule.
2205 * configure.bat: Update Makefile substitutions.
2207 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2209 * mips-opc.c (L1): Define.
2210 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2211 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2214 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2216 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2217 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2218 have multiple add units but only a single logical unit.
2220 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2221 shifted by 18, without any insertion or extraction function.
2222 (insert_cr, extract_cr): Remove.
2225 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2227 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2230 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2232 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2235 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2237 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2238 * sh-opc.h: Add copyright.
2240 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2242 * Makefile.in (crunch-m68k): Delete extra target accidentally
2243 checked in a while ago.
2245 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2247 * sh-opc.h (sh_table): Add SH3 support.
2249 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2251 * sh-opc.h: Added bsrf and braf.
2253 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2255 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2256 bogus [ls]fm{ea,fd} patterns.
2258 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2259 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2260 initialize it from memory. Make function static.
2261 (print_insn_{big,little}_arm): New functions.
2262 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2263 the correct endianness.
2266 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2268 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2269 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2272 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2274 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2277 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2279 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2280 17th, so that it builds again using GCC as the compiler.
2282 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2284 * mips-dis.c (print_insn_little_mips): Cast return value from
2285 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2286 expects an unsigned long, and that might be fewer words of
2287 argument storage (e.g., if bfd_vma is long long on a 32-bit
2289 (print_insn_big_mips): Likewise with bfd_getb32 value.
2290 (_print_insn_mips): Now static.
2292 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2294 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2295 gcc memory hog problem with initializer is fixed.
2298 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2300 * arc-opc.c (NULL): Define.
2301 (arc_operands, insn fields u,s): Delete.
2302 (arc_operands, insn fields a,b,c): Mark as signed.
2303 (arc_opcodes): No longer const, links computed at run-time.
2304 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2305 suffixes that affect the insn code.
2306 (arc_opcodes): Resort table to macros are first.
2307 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2308 (arc_opcodes, st [b] entry): Likewise.
2309 (arc_opcodes, st [b,d] entry): Fix mask, value.
2310 (arc_reg_names): Add entries for r29, r30, r31, r60.
2311 (opcode_map, icode_map): New static globals.
2312 (arc_opcode_init_tables): Initialize them.
2313 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2314 (insert_shimmoffset): Signal error if register present.
2316 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2319 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2321 Merge in support for Mac MPW as a host.
2322 (Old change descriptions retained for informational value.)
2324 * mpw-config.in (archname): Compute from the config.
2325 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2327 * mpw-config.in (target_arch): Compute from canonical target.
2328 (m68k, mips, powerpc, sparc): Add architectures.
2329 * mpw-make.in (disassemble.c.o): Add.
2330 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2332 * mpw-config.in (BFD_MACHINES): Set to a default value.
2333 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2335 * mpw-make.in (CSEARCH): Add extra-include to search path.
2337 * mpw-config.in (varargs.h): Don't create.
2338 (sysdep.h): Create using forward-include.
2339 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2341 * mpw-config.in: New file, MPW version of configure.in.
2342 * mpw-make.in: New file, MPW version of Makefile.in.
2345 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2347 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2348 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2349 (print_insn_*): Pass bfd mach number, not opcode version.
2350 * arc-opc.c (arc_get_opcode_mach): New function.
2353 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2355 * alpha-dis.c (print_insn_alpha): Put empty statement after
2358 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2360 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2361 (low_sign_extend): Likewise.
2362 (get_field): Delete unused function.
2363 (set_field, deposit_14, deposit_21): Likewise.
2365 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2367 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2370 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2372 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2374 * alpha-opc.h (OSF_ASMCODE): define
2375 print pal-code names as defined in App C of the
2376 Alpha Architecture Reference Manual
2378 * alpha-dis.c: cleaned up output
2379 print stylized code forms as defined in App A.4.3 of the
2380 Alpha Architecture Reference Manual
2382 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2384 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2386 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2389 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2391 * m68k-dis.c (opcode): New function. Returns address of opcode
2392 table entry given index, even if the opcode table was split to
2393 work around gcc bugs.
2394 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2396 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2397 (reg_names): Now const.
2398 (print_insn_arg): Arrays cacheFieldName and names now const.
2399 (print_indexed): Array scales now const.
2402 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2404 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2405 (print_insn_arc_{host,graphics,audio}): Likewise.
2406 (print_insn): Add prototype.
2407 (arc_get_disassembler): New arg `big_p'. Return little or big
2408 print fn accordingly.
2409 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2410 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2411 (arc_opval_supported): Likewise.
2412 * disassemble.c (disassembler): Pass big endian flag to
2413 arc_get_disassembler.
2416 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2418 * ppc-opc.c: Sort recently added instructions by minor opcode
2419 number within major opcode number.
2421 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2423 * hppa-dis.c: Include libhppa.h.
2425 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2427 * mips-opc.c: Change dli to use M_DLI, and add dla.
2429 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2431 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2434 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2436 * arc-dis.c (arc_get_disassembler): Change argument to int,
2437 one of bfd_mach_arc_xxx. All callers updated.
2440 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2442 * mips-opc.c: Add r4650 mul instruction.
2444 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2446 * mips-opc.c: Add uld and usd macros for unaligned double load and
2449 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2451 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2452 mfdcr, mtdcr, icbt, iccci.
2455 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2457 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2458 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2459 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2460 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2461 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2462 (insert_absaddr): New function.
2464 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2466 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2467 New argument `cpu', pass it to arc_opcode_init_tables.
2468 Document byte order dependencies. Ignore unsupported insns.
2469 (arc_get_disassembler): New function.
2470 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2471 print_insn_arc_audio): New functions.
2472 * arc-opc.c (MULTSHIFT operand): Delete.
2473 (UNSIGNED, SATURATION): New operands.
2474 (mac, mul, mul64, mulu64): New insns.
2475 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2476 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2477 (host,graphics,audio extended and auxiliary regs): Define.
2478 (ss, sc, mh, ml): New suffixes.
2479 (arc_opcode_supported, arc_opval_supported): New functions.
2480 (insert_multshift, extract_multshift): Deleted.
2481 * disassemble.c (disassembler, case bfd_arch_arc): Call
2482 arc_get_disassembler to get disassembler routine.
2485 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2487 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2488 signed char fields to shorts, more portable.
2490 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2492 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2493 char fields as signed chars, since they may have negative values.
2495 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2497 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2498 (mycroft@netbsd.org).
2500 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2502 From "Logg, Ed" <elogg@ea.com>:
2503 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2504 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2507 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2509 * ppc-opc.c: Changes based on patch from David Edelsohn
2510 <edelsohn@mhpcc.edu>.
2511 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2514 (insert_tbr): New static function.
2515 (extract_tbr): New static function.
2516 (XFXFXM_MASK, XFXM): Define.
2517 (XSPRBAT_MASK, XSPRG_MASK): Define.
2518 (powerpc_opcodes): Add instructions to access special registers by
2519 name. Add mtcr and mftbu.
2521 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2523 * mips-opc.c (P3): Define.
2524 (mips_opcodes): Add mad and madu.
2526 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2528 * configure.in: Add W65 support.
2529 * disassemble.c: Likewise.
2530 * w65-opc.h, w65-dis.c: New files.
2532 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2534 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2538 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2540 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2542 * arc-opc.c (extract_reladdr): New function.
2543 (insert_reladdr): Store address right-shifted by 2.
2546 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2548 * mips-opc.c: Add dli as a synonym for li.
2551 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2553 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2555 (extraction fns): Insn argument now array of two words. Return pointer
2556 to value's table entry. All uses changed.
2557 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2558 (insert_multshift, extract_multshift): New fns.
2559 (arc_operands): Add support for cache bypass suffix. Add support for
2560 predefined aux regs. Modifier bits moved to flags field.
2561 (arc_opcodes): Likewise.
2562 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2563 New insn rlc. Update to syntax in programmer's manual.
2564 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2565 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2567 (arc_opcode_init_tables): New argument to indicate cpu type.
2568 (insert_reg): Handle predefined aux regs.
2569 (extract_reg): Likewise.
2570 (lookup_register): New fn.
2571 * arc-dis.c (arc_condition_codes): Deleted.
2572 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2573 Clean up modifier handling. Handle predefined aux regs.
2576 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2578 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2579 print something for reserved opcode values, even if it won't
2582 * mips-dis.c (_print_insn_mips): When initializing, shift right
2583 and mask, to avoid sign extension problems on the Alpha.
2585 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2589 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2591 * configure.in: Add ARC support.
2592 * disassemble.c: Likewise.
2593 * arc-dis.c, arc-opc.c: New files.
2596 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2598 * sh-opc.h (mov.l gbr): Get direction right.
2599 * sh-dis.c (print_insn_shx): New function.
2600 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2601 print opcodes with right byte order.
2603 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2605 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2606 to avoid conflicts with getopt.
2608 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2610 * hppa-dis.c (print_insn_hppa): Read the instruction using
2611 bfd_getb32, so that it works on a little endian or 64 bit host.
2612 Remove unused local variable op.
2614 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2616 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2617 addu does not work correctly if -mips3.
2619 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2621 * a29k-dis.c (print_special): Add special register names defined
2622 on 29030, 29040 and 29050.
2623 (print_insn): Handle new operand type 'I'.
2625 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2627 * Makefile.in (INSTALL): Use top level install.sh script.
2629 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2631 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2632 that it works on a little endian host.
2634 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2636 * configure.in: Use ${config_shell} when running config.bfd.
2638 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2640 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2642 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2644 * a29k-dis.c (print_insn): Print the opcode.
2646 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2648 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2650 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2652 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2654 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2656 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2657 which store a value into memory.
2659 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2661 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2662 * arm-dis.c, arm-opc.h: New files.
2664 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2666 * Makefile.in (ns32k-dis.o): Add dependency.
2667 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2668 string, not as array of chars.
2670 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2672 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2674 * sparc-opc.c: Added sparclite extended FP operations, and
2675 versions of v9 impdep* instructions permitting specification of
2678 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2680 * i960-dis.c (reg_names): Now const.
2681 (struct sparse_tabent): New type, copied from array type in mem
2683 (ctrl): Local static array ctrl_tab now const.
2684 (cobr): Local static array cobr_tab now const.
2685 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2686 static variable mem_tab no longer explicitly initialized. Changed
2687 mem_init to const array of struct sparse_tabent.
2688 (reg): Local static variable reg_tab no longer explicitly
2689 initialized. Changed reg_init to const array of struct
2691 (ea): Local static array scale_tab now const.
2693 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2696 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2698 * configure.bat: the disassember needs to be enabled for
2699 "objdump -d" to work in djgpp.
2701 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2703 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2704 (invalid_float): Enabled general version, doesn't require running
2705 on ns32k host. Changed to take char* argument, and test for
2706 explicitly specified sizes, instead of using sizeof() on host CPU
2708 (INVALID_FLOAT): Cast first argument.
2709 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2710 list_P032, list_M032): Now const.
2711 (optlist, list_search): Made appropriate arguments now point to
2713 (print_insn_arg): Changed static array of one-character-string
2714 pointers into a static const array of characters; fixed sprintf
2715 statement accordingly.
2717 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2719 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2720 from distribution. A ns32k-dis.c from a previous distribution has
2721 been brought up to date and supports the new interface.
2723 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2725 * configure.in: add bfd_ns32k_arch target support.
2727 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2728 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2730 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2732 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2735 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2737 * h8300-dis.c, mips-dis.c: Don't use true and false.
2739 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2741 * configure.in: Change --with-targets to --enable-targets.
2743 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2745 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2746 opcodes to the first instruction with that opcode, to speed
2747 disassembly of large files. From ralphc@pyramid.com (Ralph
2750 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2752 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2754 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2756 * configure.bat: update to latest makefile.in
2758 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2760 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2761 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2762 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2763 slot insn is in a delay slot.
2764 * z8k-opc.h: (resflg): Fix patterns.
2765 * h8500-opc.h Fix CR insn patterns.
2767 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2769 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2770 "cmpl" before POWER versions, so that gas -many uses them.
2772 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2774 * disassemble.c: New file.
2775 * Makefile.in (OFILES): Add disassemble.o.
2776 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2777 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2778 binutils/configure.in.
2780 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2781 opcode being examined.
2783 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2785 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2786 (insert_ral, insert_ram, insert_ras): New functions.
2787 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2788 RAS for store with update.
2790 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2792 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2793 (edelsohn@npac.syr.edu).
2795 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2797 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2800 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2802 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2804 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2806 * ppc-opc.c (powerpc_operands): The signedp field has been
2807 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2808 instead. Add new operand SISIGNOPT.
2809 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2810 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2811 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2814 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2816 * i386-dis.c (struct private): Renamed to dis_private. `private'
2817 is a reserved word for dynix cc.
2819 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2821 * configure.in: Change error message to refer to bfd/config.bfd
2822 rather than bfd/configure.in.
2824 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2826 * ppc-opc.c: Define POWER2 as short alias flag.
2827 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2830 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2832 * i960-dis.c (print_insn_i960): Don't read a second word for
2833 opcodes 0, 1, 2 and 3.
2835 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2837 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2839 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2841 * m68881-ext.c: Removed; no longer used.
2842 * Makefile.in: Changed accordingly.
2844 * m68k-dis.c (ext_format_68881): Don't declare.
2845 (print_insn_m68k): If an instruction uses place 'i', it uses at
2846 least four fixed bytes.
2847 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2848 extended float, convert to double using floatformat_to_double, not
2849 ieee_extended_to_double, and fetch the data before converting it.
2851 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2853 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2854 davidj@ICSI.Berkeley.EDU (David Johnson).
2856 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2858 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2859 PowerPC uses bdnz[l][a].
2861 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2863 * dis-buf.c, i386-dis.c: Include sysdep.h.
2865 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2867 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2869 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2870 by Motorola PowerPC 601 with PPC_OPCODE_601.
2871 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2872 Disassemble Motorola PowerPC 601 instructions as well as normal
2873 PowerPC instructions.
2875 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2877 * i960-dis.c (reg, mem): Just use a static array instead of
2880 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2882 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2883 condition name index if this is for a negated condition.
2885 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2886 Floating point format for 'H' operand is backwards from normal
2887 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2888 operands (fmpyadd and fmpysub), handle bizarre register
2889 translation correctly for single precision format.
2891 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2892 or 'I' operands if the next format specifier is 'M' (fcmp
2893 condition completer).
2895 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2897 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2898 single number giving a bitmask for the MB and ME fields of an M
2899 form instruction. Change NB to accept 32, and turn it into 0;
2900 also turn 0 into 32 when disassembling. Seperated SH from NB.
2901 (insert_mbe, extract_mbe): New functions.
2902 (insert_nb, extract_nb): New functions.
2903 (SC_MASK): Mask out SA and LK bits.
2904 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2905 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2906 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2907 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2908 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2909 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2910 (powerpc_macros): Define table of macro definitions.
2911 (powerpc_num_macros): Define.
2913 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2914 if PPC_OPERAND_NEXT is set.
2916 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2918 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2919 char. Retrieve contents using bfd_getl32 instead of shifting.
2921 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2923 * ppc-opc.c: New file. Opcode table for PowerPC, including
2924 opcodes for POWER (RS/6000).
2925 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2926 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2927 (CFILES): Add ppc-dis.c.
2928 (ppc-dis.o, ppc-opc.o): New targets.
2929 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2931 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2933 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2934 No space before 'u', 'f', or 'N'.
2936 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2938 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2939 farther than we should.
2941 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2943 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2945 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2947 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2949 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2950 needs it, to prevent reading past the end of a section.
2952 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2954 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2955 Removed t,A case for la; always use t,A(b) case.
2957 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2959 From Ted Lemen <mellon@pepper.ncd.com>
2960 * mips-dis.c (print_insn_arg): Handle 'k'.
2961 * mips-opc.c: Make cache use k, not t.
2963 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2965 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2966 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2967 FLOAT_FORMAT_CODE to put out floating point register names.
2969 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2971 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2973 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2975 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2977 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2979 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2980 larger than 32. Moved dsxx32 variants first for disassembler.
2982 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2984 * z8kgen.c, z8k-opc.h: Add full lda information.
2986 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2988 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2989 movb instructions. Any necessary space will be emitted by
2990 the code to handle nullification completers.
2992 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2994 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2996 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2998 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2999 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3001 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3003 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3005 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3007 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3008 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3010 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3012 * m88k-dis.c (m88kdis): comment change. Remove space after
3014 (printop): handle new arg types DEC and XREG for m88110.
3016 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3018 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3019 type for absolute branch addresses. Delete special
3020 "ble" and "be" code in 'W' operand code.
3022 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3024 * mips-opc.c: Set hazard information correctly for branch
3025 likely instructions.
3027 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3029 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3030 info->fprintf_func for printing and info->print_address_func for
3033 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3037 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3039 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3040 Corrected second case of "b" for disassembler.
3042 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3044 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3045 to BFD swapping routines to correspond to BFD name changes.
3047 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3049 * mips-opc.c: Change div machine instruction to be z,s,t rather
3050 than s,t. Change div macro to be d,v,t rather than d,s,t.
3051 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3052 rem and remu which generates only the corresponding div
3053 instruction. This is for compatibility with the MIPS assembler,
3054 which only generates the simple machine instruction when an
3055 explicit destination of $0 is used.
3056 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3058 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3060 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3061 WR_31 hazard for bal, bgezal, bltzal.
3063 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3065 * hppa-dis.c (print_insn_hppa): Use print function
3066 from within the disassemble_info, not fprintf_filtered.
3068 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3070 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3071 Law, law@cs.utah.edu.)
3073 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3075 * mips-opc.c ("absu"): Removed.
3078 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3080 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3081 Changed hazard information to distinguish between memory load
3082 delays and coprocessor load delays.
3084 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3086 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3088 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3090 * configure.in: Don't pass cpu to config.bfd.
3092 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3094 * m88k-dis.c (m88kdis): Make class unsigned.
3096 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3098 * alpha-dis.c (print_insn_alpha): One branch format case was
3099 missing the instruction name.
3101 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3103 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3104 Add the arch-specific auxiliary files.
3105 (OFILES): Remove the arch-specific auxiliary files
3106 and use BFD_MACHINES instead of DIS_LIBS.
3107 * configure.in: Set BFD_MACHINES based on --with-targets option.
3109 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3114 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3116 * sparc-opc.c: Change CONST to const to deal with gcc
3117 -Dconst=__const -traditional.
3119 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3122 coprocessor instructions out of #if 0, and made them use new
3125 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3127 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3129 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3131 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3132 instruction, for use by the disassembler.
3134 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3135 hand-coded sign extensions that depended on 32-bit host ints.
3136 FIXME, we still depend on big-endian host bitfield ordering.
3137 (sparc_print_insn): Set the insn_info_valid field, and the
3138 other fields that describe the instruction being printed.
3140 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3142 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3143 `jmp' instead of just one of them.
3145 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3147 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3148 (fput_fp_reg_r): Renamed from fput_reg_r.
3149 (fput_fp_reg): New function.
3150 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3152 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3154 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3156 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3158 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3160 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3161 don't output a space.
3163 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3165 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3167 * mips-opc.c: New file, containing opcode table from
3168 ../include/opcode/mips.h.
3169 * Makefile.in: Add it.
3171 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * m88k-dis.c: New file, moved in from gdb and changed to use the
3174 new dis-asm.h disassembler interface.
3175 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3176 (m88k-dis.o): New target.
3178 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3180 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3181 argument string const char * to correspond to opcode/mips.h.
3183 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3185 * mips-dis.c: Updated to account for name changes in new version
3187 * Makefile.in: Added header file dependencies.
3189 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3191 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3193 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3195 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3196 extend, rather than shifts.
3198 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3200 * Makefile.in: Undo 15 June change.
3202 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3204 * m68k-dis.c (print_insn_arg): Change return value to byte count
3206 * m68k-dis.c: Re-write to detect invalid operands before
3207 printing anything, so we can handle this the same way we
3208 handle invalid opcodes.
3210 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3212 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3214 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3216 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3219 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3221 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3223 * configure.in: Do make sysdep.h link.
3224 * Makefile.in: Search ../include. Don't search ../bfd.
3226 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3228 Changes from Jeff Law, law@cs.utah.edu:
3229 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3230 Do not print a space before the completers specified by
3233 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3235 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3236 defined, since gdb has been fixed.
3238 Changes from Jeff Law, law@cs.utah.edu:
3239 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3240 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3241 be a *disassemble_info, not a *FILE.
3242 * hppa-dis.c: Support 'd', '!', and 'a'.
3243 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3244 * hppa-dis.c: Delete cases which are no longer needed.
3246 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3248 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3250 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3252 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3255 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3257 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3258 * configure.in: No longer need to configure to get sysdep.h.
3260 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3262 * Patches from Jeffrey Law <law@cs.utah.edu>.
3263 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3264 templates for 1.1 FP computational instructions.
3266 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3268 * h8500-dis.c (print_insn_h8500): Address argument is type
3270 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3273 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3274 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3276 * sparc-dis.c (compare_opcodes): Move static declaration to
3279 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3281 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3282 instruction, remove unimp hack from 'l' argument.
3284 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3286 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3289 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3291 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3292 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3295 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3297 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3298 arrays of string pointers to 2-d arrays of chars, to save
3301 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3303 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3304 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3306 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3308 * hppa-dis.c: New file from Utah, adapted to new disassembler
3310 * Makefile.in: Include it.
3312 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3314 * sh-dis.c, sh-opc.h: New files.
3316 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3318 * alpha-dis.c, alpha-opc.h: New files.
3320 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3322 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3325 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3327 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3329 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3331 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3334 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3336 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3337 and double percent signs a few places.
3339 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3341 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3342 Use info->print_address_func not print_address.
3344 * dis-buf.c (generic_print_address): New function.
3346 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3348 * Makefile.in: Add sparc-dis.c.
3349 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3351 Add `add' instruction to the set that get checked
3352 for a preceding `sethi' in order to print an absolute address.
3353 * (print_insn): Disassembly prefers real instructions.
3354 (is_delayed_branch): Speed up.
3355 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3356 Still missing some float ops, and needs testing.
3357 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3358 F_ALIAS. Use printf, not fprintf, when not passing a file
3360 (compare_opcodes): Check that identical instructions have
3361 identical opcodes, complain otherwise.
3364 * Include reg_names.
3366 Use dis-asm.h/read_memory_func interface.
3368 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3370 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3371 deliberately return non-zero to setjmp from longjmp. Otherwise
3372 this code fails to compile.
3374 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3376 * m68k-dis.c: Fix prototype for fetch_arg().
3378 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3380 * dis-buf.c: New file, for new read_memory_func interface.
3381 Makefile.in (OFILES): Include it.
3382 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3383 Use new read_memory_func interface.
3385 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3387 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3388 * h8500-opc.h: Fix couple of opcodes.
3390 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3392 * Makefile.in: add dvi & installcheck targets
3394 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3396 * Makefile.in: Update for h8500-dis.c.
3398 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3400 * h8500-dis.c, h8500-opc.h: New files
3402 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3404 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3405 ../include/dis-asm.h.
3406 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3407 and ../gdb/m68k-pinsn.c).
3408 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3409 and ../gdb/i386-pinsn.c).
3410 * m68881-ext.c: New file. Moved definition of
3411 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3412 * Makefile.in: Adjust for new files.
3413 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3414 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3415 can be dis-assembled.
3417 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3419 * mips-dis.c (print_insn_arg): Now returns void.
3421 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3423 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3424 files that use the macros.
3426 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3428 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3429 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3430 (CFILES): Added mips-dis.c.
3432 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3434 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3435 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3437 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3439 * Makefile.in: Improve *clean rules.
3440 * configure.in: Allow a default host.
3442 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3444 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3445 files include other sysdep files
3447 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3449 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3451 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3453 * configure.in: For host support, use ../bfd/configure.host
3454 so it stays in sync with the ../bfd/hosts database.
3456 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3458 * configure.in: use cpu-vendor-os triple instead of nested cases
3460 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3462 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3463 *always* the wrong one.
3465 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3467 * z8kgen.c: added copyright info
3469 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3471 * z8k-dis.c (unparse_instr): prettier tabs
3472 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3474 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3476 * configure.in: Add ncr* configuration.
3477 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3478 picayune ANSI compilers happy.
3480 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3482 * configure.in (i386): Make i386 and i486 synonymous for now.
3483 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3485 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3487 * Makefile.in (install): Fix typo.
3489 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3491 * Makefile.in (make): Remove obsolete crud.
3492 (sparc-opc.o): Avoid Sun Make VPATH bug.
3494 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3496 * Makefile.in: since there are no SUBDIRS, remove rule and
3497 references of subdir_do.
3499 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3501 * Makefile.in (install): Get the library name right here too.
3502 Don't install bfd.h, since it's unrelated to this library. No
3503 subdirs to recurse into, either.
3504 (CFILES): The source file has a .c suffix, not .o.
3506 * sparc-opc.c: New file, moved from BFD.
3507 * Makefile.in (OFILES): Build it.
3509 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3511 * z8k-dis.c: fixed forward refferences of some declarations.
3513 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3515 * Makefile.in: get the name of the library right
3517 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3519 * z8k-dis.c: knows how to disassemble z8k stuff
3520 * z8k-opc.h: new file full of z8000 opcodes
3524 version-control: never
projects / external / binutils.git / blob