1 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
3 * v850-dis.c (disassemble): Replace // with /* ... */
5 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
7 * sparc-opc.c: Add wr & rd for v9a asr's.
8 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
9 (v9a_asr_reg_names): New variable.
10 Patch from David Miller <davem@vger.rutgers.edu>.
12 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
14 * sparc-opc.c (v9notv9a): New insn type.
15 (IMPDEP): Move to the end to not conflict with edge8 et al.
16 Patch from David Miller <davem@vger.rutgers.edu>.
18 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
20 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
22 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
24 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
26 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
28 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
29 of disassemble_info structure to determine if an overlay address
30 has a matching symbol in low memory.
32 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
33 new symbol_at_address_func field in disassemble_info structure.
35 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
37 * v850-opc.c (extract_d22): Use signed arithmatic.
39 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
41 * mips-opc.c: Three op mult is not an ISA insn.
43 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
45 * mips-opc.c: Fix formatting.
47 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
49 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
50 than assuming that char is signed. Explicitly sign extend 16 bit
51 values, rather than assuming that short is 16 bits.
52 (OP_sI, OP_J, OP_DIR): Likewise.
55 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
57 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
61 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
63 * v850-opc.c: Fix typo in comment.
65 * v850-dis.c (disassemble): Add test of processor type when
68 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
70 * configure.in: Use a diversion to set enable_shared before the
74 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
76 * m68k-opc.c (TBL1): Use ! rather than `.
77 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
79 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
81 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
83 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
85 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
88 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
89 * aclocal.m4: Rebuild with new libtool.
93 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
95 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
98 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
100 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
102 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
104 * v850-opc.c (v850_opcodes): Further rearrangements.
107 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
109 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
112 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
114 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
117 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
119 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
121 * mips16-opc.c: Added mips16 sdbbp.
124 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
126 * v850-opc.c: Initialise processors field of v850_opcode structure.
129 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
131 Merge changes from Martin Hunt:
133 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
135 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
136 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
137 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
139 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
141 * d30v-dis.c (print_insn): First operand of d*i (delayed
142 branch) instructions is relative.
144 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
145 (d30v_operand_table): Add IMM6S3 type.
146 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
148 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
149 and cmp instructions.
151 * d30v-opc.c: Correct entries for repeat*, and sat*.
152 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
153 types. Correct several formats.
155 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
157 * d30v-opc.c (pre_defined_registers): Change control registers.
159 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
160 SHORT_C2. Manual was incorrect.
162 * d30v-dis.c (lookup_opcode): Return value now indicates
163 if an opcode has a short and a long form. Used for deciding
164 to append a ".s" or ".l".
165 (print_insn): Append a ".s" to an instruction if it is
166 the short form and ".l" if it is a long form. Do not append
167 anything if the instruction has only one possible size.
169 * d30v-opc.c: Change mulx2h to require an even register.
170 New form: SHORT_A2; a SHORT_A form that needs an even
171 register as the first operand.
173 * d30v-dis.c (print_insn_d30v): Fix problem where the last
174 instruction was not being disassembled if there were an odd
175 number of instructions.
177 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
181 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
183 * v850-dis.c (disassemble): Improved display of register lists.
186 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
188 * sparc-opc.c (sparc_opcodes): Fix assembler args to
189 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
190 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
191 fandnot1s, fandnot2s.
193 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
195 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
197 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
199 * cgen-asm.c (cgen_parse_address): New argument resultp.
201 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
203 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
205 * mn10200-dis.c (disassemble): PC relative instructions are
206 relative to the next instruction, not the current instruction.
208 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
210 * v850-dis.c (disassemble): Only signed extend values that are not
211 returned by extract functions.
212 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
214 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
216 * v850-opc.c: Update comments. Remove use of
217 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
219 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
221 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
223 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
225 * configure: Rebuilt with latest devo autoconf for NT support.
227 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
229 * v850-dis.c (disassemble): Use curly brace syntax for register
232 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
233 where r0 is being used as a destination register.
236 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
238 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
242 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
244 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
245 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
246 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
247 Add insns to access SGR and DBR.
248 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
251 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
253 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
256 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
258 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
259 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
262 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
264 * configure (cgen_files): Add support for v850e target.
265 * configure.in (cgen_files): Add support for v850e target.
267 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
269 * configure (cgen_files): Add support for v850eq target.
270 * configure.in (cgen_files): Add support for v850eq target.
273 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
275 * configure.in (bfd_arc_arch): Add.
276 * configure: Rebuild.
277 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
278 * Makefile.in: Rebuild.
279 * arc-dis.c, arc-opc.c: New files.
280 * disassemble.c (ARCH_all): Define ARCH_arc.
281 (disassembler): Add ARC support.
283 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
286 * v850-dis.c (disassemble): Add support for v850EQ instructions.
288 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
289 (v850_opcodes): Add v850EQ instructions.
291 * v850-dis.c (disassemble): Add support for v850E instructions.
293 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
294 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
295 insert_spe, extract_spe): New Functions.
296 (v850_opcodes): Add v850E instructions.
299 * v850-opc.c: Reorganised and re-layed out to improve readability
302 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
304 * configure: Rebuild with autoconf 2.12.1.
306 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
308 * aclocal.m4, configure: Rebuild with new automake patches.
310 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
312 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
313 * acinclude.m4: Just include acinclude.m4 from BFD.
314 * aclocal.m4, configure: Rebuild.
316 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
318 * Makefile.am: New file, based on old Makefile.in.
319 * acconfig.h: New file.
320 * acinclude.m4: New file.
321 * stamp-h.in: New file.
322 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
323 Removed shared library handling; now handled by libtool. Replace
324 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
325 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
326 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
327 handling in AC_OUTPUT.
328 * dep-in.sed: Change .o to .lo.
329 * Makefile.in: Now built with automake.
330 * aclocal.m4: Now built with aclocal.
331 * config.in, configure: Rebuild.
333 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
335 * mips-opc.c: Fix typo/thinko in "eret" instruction.
338 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
340 * mips-opc.c: Fix coding of mtsa.
343 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
345 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
347 * sparc-dis.c (sorted_opcodes): New static local.
348 (struct opcode_hash): `opcode' is pointer to const element.
349 (build_hash): First arg is now table of sorted pointers.
350 (print_insn_sparc): Sort opcodes by sorting table of pointers.
351 (compare_opcodes): Update.
353 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
355 * cgen-opc.c: #include <ctype.h>.
356 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
357 Handle case insensitive hashing.
358 (hash_keyword_value): Change type of `value' to unsigned int.
360 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
362 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
363 precision FP, mark it as such. Likewise for double precision
364 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
367 (mips_builtin_opcodes): Remove non-existant r5900 instructions
371 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
373 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
374 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
377 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
379 * ppc-opc.c (extract_nsi): make unsigned expression signed before
381 (UNUSED): remove one level of parens, so MSVC doesn't choke on
382 nesting depth when all the macros are expanded.
384 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
386 * sparc-opc.c: The fcmp v9a instructions take an integer register
387 as a destination, not a floating point register. From Christian
388 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
390 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
392 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
393 syntax. From Roman Hodek
394 <rnhodek@faui22c.informatik.uni-erlangen.de>.
396 * i386-dis.c (twobyte_has_modrm): Fix pand.
398 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
400 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
402 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
404 * arm-dis.c: Add prototypes for arm_decode_shift and
407 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
409 * mips-opc.c: Add r3900 insns.
411 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
413 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
414 print delay slot instructions on the same line. When using a PC
415 relative load, add a comment with the value being loaded if it can
418 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
420 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
421 to pushS/popS for segment regs and byte constant so that
422 pushw/popw printed when in 16 bit data mode.
424 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
425 print cbtw, cwtd in 16 bit data mode.
426 * i386-dis.c (putop): extra case W to support above.
428 * i386-dis.c (print_insn_x86): print addr32 prefix when given
429 address size prefix in 16 bit address mode.
431 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
433 * sh-dis.c: Reindent. Rename local variable fprintf to
436 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
438 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
440 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
442 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
444 * mips16-opc.c (mip16_opcodes): same.
446 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
448 * m68k-opc.c (moveb): Change $d to %d.
450 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
452 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
453 (twobyte_has_modrm): Likewise.
455 (OP_MMX, OP_EM, OP_MS): New static functions.
457 * i386-dis.c: Revert patch of April 4. The output now matches
460 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
462 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
465 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
467 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
469 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
471 * Makefile.in (install): Depend upon installdirs.
472 (installdirs): New target.
474 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
476 From Thomas Graichen <graichen@rzpd.de>:
477 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
478 * configure: Rebuild.
480 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
482 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
483 Delete string{,s}.h support.
485 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
487 * cgen-asm.c (cgen_parse_operand_fn): New global.
488 (cgen_parse_{{,un}signed_integer,address}): Update call to
489 cgen_parse_operand_fn.
490 (cgen_init_parse_operand): New function.
491 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
492 from cgen_asm_init_parse.
493 (m32r_cgen_assemble_insn): New operand `errmsg'.
494 Delete call to as_bad, return error message to caller.
495 (m32r_cgen_asm_hash_keywords): #if 0 out.
497 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
499 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
501 [case 'J']: Fix typo in register name.
503 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
505 * configure.in: Substitute SHLIB_LIBS.
506 * configure: Rebuild.
507 * Makefile.in (SHLIB_LIBS): New variable.
508 ($(SHLIB)): Use $(SHLIB_LIBS).
510 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
512 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
514 * cgen-opc.c (hash_keyword_name): Improve algorithm.
516 * disassemble.c (disassembler): Handle m32r.
518 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
520 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
521 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
522 * Makefile.in (CFILES): Add them.
523 (ALL_MACHINES): Add them.
524 (dependencies): Regenerate.
525 * configure.in (cgen_files): New variable.
526 (bfd_m32r_arch): Add entry.
527 * configure: Regenerate.
529 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
531 * configure.in: Correct file names for bfd_mn10[23]00_arch.
532 * configure: Rebuild.
534 * Makefile.in: Rebuild dependencies.
536 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
538 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
541 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
543 * Branched binutils 2.8.
545 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
547 * m10200-dis.c: Rename from mn10200-dis.c.
548 * m10200-opc.c: Rename from mn10200-opc.c.
549 * m10300-dis.c: Rename from mn10300-dis.c
550 * m10300-opc.c: Rename from mn10300-opc.c.
551 * Makefile.in: Update accordingly.
553 * mips16-opc.c: Add mul and dmul macros.
555 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
557 * makefile.vms: Update CFLAGS, add clean target.
559 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
561 * mips-opc.c: Add "wait". From Ralf Baechle
562 <ralf@gnu.ai.mit.edu>.
564 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
565 * configure, config.in: Rebuild.
566 * sysdep.h: Include <stdlib.h> if it exists.
567 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
569 * Makefile.in: Rebuild dependencies.
571 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
573 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
574 Andrew Bray <andy@madhouse.demon.co.uk>.
576 * mips-opc.c: Add cast when setting mips_opcodes.
578 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
580 * v850-dis.c (disassemble): Fix sign extension problem.
581 * v850-opc.c (extract_d*): Fix sign extension problems to make
582 disassembly calculate branch offsets correctly.
584 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
586 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
588 * mips-opc.c: Add dctr and dctw.
591 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
593 * d30v-dis.c (print_insn): Change the way signed constants
596 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
598 * Makefile.in (BFD_H): New variable.
599 (HFILES): New variable.
600 (CFILES): Add all C files.
601 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
602 Delete old dependencies, and build new ones.
603 * dep-in.sed: New file.
605 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
607 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
609 start-sanitize-coldfire
610 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
612 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
615 end-sanitize-coldfire
616 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
618 * mn10200-opc.c: Change "trap" to "syscall".
619 * mn10300-opc.c: Add new "syscall" instruction.
621 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
623 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
624 mulul insns on the coldfire.
626 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
628 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
629 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
630 (print_insn_little_arm): Likewise.
632 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
634 Based on patches from H.J. Lu <hjl@lucon.org>:
635 * i386-dis.c (fetch_data): Add prototype.
636 * m68k-dis.c (fetch_data): Add prototype.
637 (dummy_print_address): Add prototype. Make static.
638 * ppc-opc.c (valid_bo): Add prototype.
639 * sparc-dis.c (build_hash_table): Add prototype.
640 (is_delayed_branch, compute_arch_mask): Add prototypes.
641 (print_insn_sparc): Make several local variables const.
642 (compare_opcodes): Change arguments to const PTR. Add prototype.
643 * sparc-opc.c (arg): Change name field to be const.
644 (lookup_name, lookup_value): Add prototypes. Change table and
645 name parameters to be const.
646 (sparc_encode_asi): Change name parameter to be const.
647 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
648 (sparc_encode_sparclet_cpreg): Likewise.
649 (sparc_decode_asi): Change return type to be const.
650 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
651 (sparc_decode_sparclet_cpreg): Likewise.
653 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
655 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
656 Solaris doesn't like the combined options, and the -f is
658 (stamp-tshlink, install): Likewise.
660 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
662 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
665 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
667 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
669 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
671 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
674 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
676 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
679 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
681 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
683 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
685 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
688 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
690 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
691 floatformat_to_double to make portable.
692 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
695 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
697 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
698 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
700 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
702 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
703 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
706 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
708 * tic80-opc.c (LSI_SCALED): Renamed from this ...
709 (OFF_SL_BR_SCALED): ... to this, and added the flag
710 TIC80_OPERAND_BASEREL to the flags word.
711 (tic80_opcodes): Replace all occurances of LSI_SCALED with
715 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
717 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
718 Change mips_opcodes from const array to a pointer,
719 and change bfd_mips_num_opcodes from const int to int,
720 so that we can increase the size of the mips opcodes table
724 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
726 * tic80-opc.c (tic80_predefined_symbols): Revert change to
727 store BITNUM values in the table in one's complement form
728 to match behavior when assembler is given a raw numeric
729 value for a BITNUM operand.
730 * tic80-dis.c (print_operand_bitnum): Ditto.
734 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
736 * d30v-opc.c: Removed references to FLAG_X.
739 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
741 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
744 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
746 * Makefile.in: Added d30v object files.
747 * configure: (bfd_d30v_arch) Rebuilt.
748 * configure.in: (bfd_d30v_arch) Added new case.
749 * d30v-dis.c: New file.
750 * d30v-opc.c: New file.
751 * disassemble.c (disassembler) Add entry for d30v.
755 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
757 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
758 representations for the floating point BITNUM values.
760 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
762 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
763 in the table in one's complement form, as they appear in the
765 (tic80_symbol_to_value): Use macros to access predefined
767 (tic80_value_to_symbol): Ditto.
768 (tic80_next_predefined_symbol): New function.
769 * tic80-dis.c (print_operand_bitnum): Remove code that did
770 one's complement for BITNUM values.
774 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
776 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
779 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
781 * makefile.vms: Remove 8 bit characters. Update to latest
784 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
786 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
788 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
790 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
791 (IMM24_PCREL): Likewise.
793 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
795 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
796 address for an extended PC relative instruction that is not a
799 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
801 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
805 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
807 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
808 (tic80_opcodes): Sort entries so that long immediate forms
809 come after short immediate forms, making it easier for
810 assembler to select the right one for a given operand.
813 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
815 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
817 (print_insn_mips16): Likewise.
820 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
822 * mips-opc.c: add r5900.
826 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
828 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
829 a symbol class that restricts translation to just that
830 class (general register, condition code, etc).
832 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
834 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
835 and REG_DEST_E for register operands that have to be
836 an even numbered register. Add REG_FPA for operands that
837 are one of the floating point accumulator registers.
838 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
839 (tic80_opcodes): Change entries that need even numbered
840 register operands to use the new operand table entries.
841 Add "or" entries that are identical to "or.tt" entries.
844 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
846 * mips16-opc.c: Add new cases of exit instruction for
848 * mips-dis.c (print_mips16_insn_arg): Display floating point
849 registers in operands of exit instruction. Print `$' before
850 register names in operands of entry and exit instructions.
853 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
855 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
856 pairs for all predefined symbols recognized by the assembler.
857 Also used by the disassembling routines.
858 (tic80_symbol_to_value): New function.
859 (tic80_value_to_symbol): New function.
860 * tic80-dis.c (print_operand_control_register,
861 print_operand_condition_code, print_operand_bitnum):
862 Remove private tables and use tic80_value_to_symbol function.
865 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
867 * d10v-dis.c (print_operand): Change address printing
868 to correctly handle PC wrapping. Fixes PR11490.
870 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
872 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
875 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
877 * mips-dis.c (print_insn_mips16): Set insn_info information.
878 (print_mips16_insn_arg): Likewise.
880 * mips-dis.c (print_insn_mips16): Better handling of an extend
881 opcode followed by an instruction which can not be extended.
883 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
885 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
886 coldfire moveb instruction to not allow an address register as
887 destination. Although the documentation does not indicate that
888 this is invalid, experiments uncovered unexpected behavior.
889 Added a comment explaining the situation. Thanks to Andreas
890 Schwab for pointing this out to me.
893 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
895 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
896 entries are presorted so that entries with the same mnemonic are
897 adjacent to each other in the table. Sort the entries for each
898 instruction so that this is true.
901 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
903 * m68k-dis.c: Include <libiberty.h>.
904 (print_insn_m68k): Sort the opcode table on the most significant
905 nibble of the opcode.
908 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
910 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
911 "vsub", "vst", "xnor", and "xor" instructions.
912 (V_a1): Renamed from V_a, msb of accumulator reg number.
913 (V_a0): Add macro, lsb of accumulator reg number.
915 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
917 * tic80-dis.c (print_insn_tic80): Broke excessively long
918 function up into several smaller ones and arranged for
919 the instruction printing function to be callable recursively
920 to print vector instructions that have both a load and a
921 math instruction packed into a single opcode.
922 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
923 to explain why it comes after the other vector opcodes.
926 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
928 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
929 move insns to handle immediate operands.
931 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
933 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
934 fix operand mask in the "moveml" entries for the coldfire.
937 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
939 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
940 New macros for building vector instruction opcodes.
941 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
942 FMT_LI, which were unused. The field is now a flags field.
943 Remove some opcodes that are possible, but illegal, such
944 as long immediate instructions with doubles for immediate
945 values. Add "vadd" and "vld" instructions.
947 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
949 * tic80-opc.c (tic80_operands): Reorder some table entries to make
950 the order more logical. Move the shift alias instructions ("rotl",
951 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
952 interspersed with the regular sr.x and sl.x instructions. Add
953 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
954 "sub", "subu", "swcr", and "trap".
956 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
958 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
959 (OFF_SL_PC): Renamed from OFF_SL.
960 (OFF_SS_BR): New operand type for base relative operand.
961 (OFF_SL_BR): New operand type for base relative operand.
962 (REG_BASE): New operand type for base register operand.
963 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
964 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
965 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
967 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
968 10 char field, padded with spaces on rhs, rather than a string
969 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
970 than old TIC80_OPERAND_RELATIVE. Add support for new
971 TIC80_OPERAND_BASEREL flag bit.
973 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
975 * tic80-dis.c (print_insn_tic80): Print floating point operands
977 * tic80-opc.c (SPFI): Add single precision floating point
978 immediate operand type.
979 (ROTATE): Add rotate operand type for shifts.
980 (ENDMASK): Add for shifts.
981 (n): Macro for the 'n' bit.
982 (i): Macro for the 'i' bit.
983 (PD): Macro for the 'PD' field.
984 (P2): Macro for the 'P2' field.
985 (P1): Macro for the 'P1' field.
986 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
990 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
992 * mn10200-dis.c (disassemble): Mask off unwanted bits after
993 adding in current address for pc-relative operands.
996 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
998 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
999 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1000 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1001 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1002 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1003 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1004 (REG_SCALED, LSI_SCALED): New operand types.
1005 (E): New macro for 'E' bit at bit 27.
1006 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1007 opcodes, including the various size flavors (b,h,w,d) for
1008 the direct load and store instructions.
1010 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1012 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1014 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1015 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1016 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1017 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1018 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1019 masks with "MASK_* & ~M_*" to get the M bit reset.
1020 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1022 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1024 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1025 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1026 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1028 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1029 CC, SICR, and LICR table entries.
1030 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1031 "bcnd", and "brcr" opcodes.
1034 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1036 * ppc-opc.c (powerpc_operands): Make comment match the
1037 actual fields (no shift field).
1038 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1039 start-sanitize-tic80
1040 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1041 partial implementation, work in progress.
1042 * tic80-opc.c (tic80_operands): Begin construction operands table.
1043 (tic80_opcodes): Continue populating opcodes table and start
1044 filling in the operand indices.
1045 (tic80_num_opcodes): Add this.
1048 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1050 * m68k-opc.c: Add #B case for moveq.
1052 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1054 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1055 before they are used.
1057 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1059 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1060 for "breakpoint" instruction.
1062 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1064 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1065 (dep): Use ALL_CFLAGS rather than CFLAGS.
1067 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1069 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1072 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1074 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1075 start-sanitize-tic80
1076 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1079 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1081 * mips16-opc.c: Add "abs".
1083 start-sanitize-tic80
1084 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1086 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1087 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1088 (disassembler): Add bfd_arch_tic80 support to set disassemble
1089 to print_insn_tic80.
1090 * tic80-dis.c (print_insn_tic80): Add stub.
1092 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1094 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1095 * configure: Regenerate with autoconf.
1096 * tic80-dis.c: Add file.
1097 * tic80-opc.c: Add file.
1100 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1102 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1104 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1106 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1107 (mn10200_opcodes): Use it for some logicals and btst insns.
1108 Add "break" and "trap" instructions.
1110 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1112 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1114 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1116 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1117 relative load or add now depends upon whether the instruction is
1120 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1122 * mn10200-dis.c: Finish writing disassembler.
1123 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1124 Fix mask for "jmp (an)".
1126 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1127 handle endianness issues for mn10300.
1129 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1131 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1133 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1134 instruction. Fix opcode field for "movb (imm24),dn".
1136 * mn10200-opc.c (mn10200_operands): Fix insertion position
1139 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1141 * mn10200-opc.c: Create mn10200 opcode table.
1142 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1143 but moving along nicely.
1145 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1147 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1149 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1151 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1152 specifiers for fmovem* instructions.
1154 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1156 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1158 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1160 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1163 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1165 * mn10300-opc.c: Add some comments explaining the various
1168 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1170 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1172 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1175 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1176 operand specifiers in fmovm* instructions.
1178 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1180 * ppc-opc.c (insert_li): Give an error if the offset has the two
1181 least significant bits set.
1183 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1185 * mips-dis.c (print_insn_mips16): Separate the instruction from
1186 the arguments with a tab, not a space.
1188 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1190 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1193 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1196 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1198 * configure: Rebuild with autoconf 2.12.
1200 Add support for mips16 (16 bit MIPS implementation):
1201 * mips16-opc.c: New file.
1202 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1203 (mips16_reg_names): New static array.
1204 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1205 after seeing a 16 bit symbol.
1206 (print_insn_little_mips): Likewise.
1207 (print_insn_mips16): New static function.
1208 (print_mips16_insn_arg): New static function.
1209 * mips-opc.c: Add jalx instruction.
1210 * Makefile.in (mips16-opc.o): New target.
1211 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1212 * configure: Rebuild.
1214 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1216 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1217 operand specifiers in *save, *restore and movem* instructions.
1219 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1222 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1223 register operands for immediate arithmetic, not, neg, negx, and
1224 set according to condition instructions.
1226 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1227 specifier of the effective-address operand in immediate forms of
1228 arithmetic instructions. The specifier for the immediate operand
1229 notes how and where the constant will be stored.
1231 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1233 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1236 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1239 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1241 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1243 * mn10300-dis.c (disassemble): Handle register lists.
1245 * mn10300-opc.c: Fix handling of register list operand for
1246 "call", "ret", and "rets" instructions.
1248 * mn10300-dis.c (disassemble): Print PC-relative and memory
1249 addresses symbolically if possible.
1250 * mn10300-opc.c: Distinguish between absolute memory addresses,
1251 pc-relative offsets & random immediates.
1253 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1255 (disassemble): Handle SPLIT and EXTENDED operands.
1257 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1259 * mn10300-dis.c: Rough cut at printing some operands.
1261 * mn10300-dis.c: Start working on disassembler support.
1262 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1264 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1266 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1268 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1270 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1272 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1274 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1275 register argument is calls and jmp instructions.
1277 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1279 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1280 getx operand. Fix opcode for mulqu imm,dn.
1282 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1284 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1285 in MN10300_OPERAND_SPLIT operands for how many bits
1286 appear in the basic insn word. Add IMM32_HIGH24,
1287 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1288 (mn10300_opcodes): Use new operands as needed.
1290 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1291 for bset, bclr, btst instructions.
1292 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1294 * mn10300-opc.c (mn10300_operands): Remove many redundant
1295 operands. Update opcode table as appropriate.
1296 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1297 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1299 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1301 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1302 operands (for indexed load/stores). Fix bitpos for DI
1303 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1304 few instructions that insert immediates/displacements in the
1305 middle of the instruction. Add IMM8E for 8 bit immediate in
1306 the extended part of an instruction.
1307 (mn10300_operands): Use new opcodes as appropriate.
1309 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1311 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1312 sequential so the assembler never parallelizes it with
1315 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1317 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1318 a data/address register that appears in register field 0
1319 and register field 1.
1320 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1322 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1324 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1325 standard disassembly.
1327 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1328 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1329 Recategorize PALcode instructions.
1331 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1333 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1335 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1337 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1338 there are no operand types.
1340 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1342 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1344 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1346 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1348 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1350 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1352 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1353 and sst.w instructions.
1355 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1358 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1360 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1363 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1365 * ppc-opc.c (PPCPWR2): Define.
1366 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1369 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1371 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1372 field for movhu instruction.
1374 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1375 cast value to "long" not "signed long" to keep hpux10
1378 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1380 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1383 * mn10300-opc.c (FMT*): Remove definitions.
1385 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1386 for shift-by-register opcodes.
1388 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1389 into [AD][MN][01] for encoding the position of the register
1392 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1394 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1395 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1397 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1399 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1400 Fix various typos. Add "PAREN" operand.
1401 (MEM, MEM2): Define.
1402 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1403 operands. Fix several typos.
1405 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1408 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1410 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1411 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1413 (mn10300_opcodes): Break opcode format out into its own field.
1414 Update many operand fields to deal with signed vs unsigned
1415 issues. Fix one or two typos in the "mov" instruction
1416 opcode, mask and/or operand fields.
1418 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1420 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1421 m68851 wasn't reset.
1423 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1425 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1426 all opcodes. Very rough cut at operands for all opcodes.
1428 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1431 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1433 * mn10200-opc.c, mn10300-opc.c: New files.
1434 * mn10200-dis.c, mn10300-dis.c: New files.
1435 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1436 * disassemble.c: Break mn10x00 support into 10200 and 10300
1438 * configure.in: Likewise.
1439 * configure: Rebuilt.
1441 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1443 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1445 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1447 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1449 * disassemble (ARCH_mn10x00): Define.
1450 (disassembler): Handle bfd_arch_mn10x00.
1451 * configure.in: Recognize bfd_mn10x00_arch.
1452 * configure: Rebuilt.
1454 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1456 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1457 accordingly. Don't declare functions using op_rtn.
1459 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1461 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1462 params to be more standard.
1463 * (disassemble): Print absolute addresses and symbolic names for
1464 branch and jump targets.
1465 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1467 * (v850_opcodes): Add breakpoint insn.
1469 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1471 * m68k-opc.c: Move the fmovemx data register cases before the
1472 other cases, so that they get recognized before the data register
1473 does gets treated as a degenerate register list.
1475 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1477 * mips-opc.c: Add a case for "div" and "divu" with two registers
1478 and a destination of $0.
1480 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1482 * mips-dis.c (print_insn_arg): Add prototype.
1483 (_print_insn_mips): Ditto.
1485 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1487 * mips-dis.c (print_insn_arg): Print condition code registers as
1490 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1492 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1494 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1496 * v850-dis.c (disassemble): Make static. Provide prototype.
1498 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1500 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1503 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1505 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1506 ']' characters into the output stream.
1507 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1508 Add "memop" field to all opcodes (for the disassembler).
1509 Reorder opcodes so that "nop" comes before "mov" and "jr"
1510 comes before "jarl".
1512 * v850-dis.c (print_insn_v850): Fix typo in last change.
1514 * v850-dis.c (print_insn_v850): Properly handle disassembling
1515 a two byte insn at the end of a memory region when the memory
1516 region's size is only two byte aligned.
1518 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1520 * v850-dis.c (v850_reg_names): Define.
1521 (v850_sreg_names, v850_cc_names): Likewise.
1522 (disassemble): Very rough cut at printing operands (unformatted).
1524 * v850-opc.c (BOP_MASK): Fix.
1525 (v850_opcodes): Fix mask for jarl and jr.
1527 * v850-dis.c: New file. Skeleton for disassembler support.
1528 * Makefile.in Remove v850 references, they're not needed here.
1529 * configure.in: Add v850-dis.o when building v850 toolchains.
1530 * configure: Rebuilt.
1531 * disassemble.c (disassembler): Call v850 disassembler.
1533 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1534 (insert_d8_6, extract_d8_6): New functions.
1535 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1536 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1538 (IF4A, IF4B): Use "D7" instead of "D7S".
1539 (IF4C, IF4D): Use "D8_7" instead of "D8".
1540 (IF4E, IF4F): New. Use "D8_6".
1541 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1542 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1544 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1545 (v850_operands): Change D16 to D16_15, use special insert/extract
1546 routines. New new D16 that uses the generic insert/extract code.
1547 (IF7A, IF7B): Use D16_15.
1548 (IF7C, IF7D): New. Use D16.
1549 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1551 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1552 message. Issue an error if the branch offset is odd.
1554 * v850-opc.c: Add notes about needing special insert/extract
1555 for all the load/store insns, except "ld.b" and "st.b".
1557 * v850-opc.c (insert_d22, extract_d22): New functions.
1558 (v850_operands): Use insert_d22 and extract_d22 for
1560 (insert_d9): Fix range check.
1562 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1564 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1565 and set bits field to D9 and D22 operands.
1567 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1569 * v850-opc.c (v850_operands): Define SR2 operand.
1570 (v850_opcodes): "ldsr" uses R1,SR2.
1572 * v850-opc.c (v850_opcodes): Fix opcode specs for
1573 sld.w, sst.b, sst.h, sst.w, and nop.
1575 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1577 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1578 end of the opcode table.
1580 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1582 * d10v-opc.c (pre_defined_registers): Added register pairs,
1583 "r0-r1", "r2-r3", etc.
1585 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1587 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1588 Create I16U for an unsigned 16bit mmediate operand.
1589 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1591 * v850-opc.c (v850_operands): Define EP operand.
1592 (IF4A, IF4B, IF4C, IF4D): Use EP.
1594 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1595 with immediate operand, "movhi". Tweak "ldsr".
1597 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1598 correct. Get sld.[bhw] and sst.[bhw] closer.
1600 * v850-opc.c (v850_operands): "not" is a two byte insn
1602 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1604 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1606 * v850-opc.c (two): Get order of words correct.
1608 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1610 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1611 register source and destination operands.
1612 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1614 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1615 same thinko in "trap" opcode.
1617 * v850-opc.c (v850_opcodes): Add initializer for size field
1620 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1621 Add D8 for 8-bit unsigned field in short load/store insns.
1622 (IF4A, IF4D): These both need two registers.
1623 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1624 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1625 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1626 for "ldsr" and "stsr".
1627 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1630 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1631 short store word (sst.w).
1633 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1635 * v850-opc.c (v850_operands): Added insert and extract fields,
1636 pointers to functions that handle unusual operand encodings.
1638 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1640 * v850-opc.c (v850_opcodes): Enable "trap".
1642 * v850-opc.c (v850_opcodes): Fix order of displacement
1643 and register for "set1", "clr1", "not1", and "tst1".
1645 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1647 * v850-opc.c (v850_operands): Add "B3" support.
1648 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1651 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1653 * v850-opc.c: Close unterminated comment.
1655 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1657 * v850-opc.c (v850_operands): Add flags field.
1658 (v850_opcodes): add move opcodes.
1660 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1662 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1663 * configure: (bfd_v850v_arch) Add new case.
1664 * configure.in: (bfd_v850_arch) Add new case.
1665 * v850-opc.c: New file.
1667 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1669 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1671 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1673 * d10v-opc.c: Add additional information to the opcode
1674 table to help determinine which instructions can be done
1677 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1679 * mpw-make.sed: Update editing of include pathnames to be
1682 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1684 * arm-opc.h: Added "bx" instruction definition.
1686 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1688 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1690 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1692 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1694 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1696 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1698 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1700 * makefile.vms: Update for alpha-opc changes.
1702 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1704 * i386-dis.c (print_insn_i386): Actually return the correct value.
1705 (ONE, OP_ONE): #ifdef out; not used.
1707 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1709 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1710 Changed subi operand type to treat 0 as 16.
1712 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1714 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1717 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1719 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1720 memory transfer instructions. Add new format string entries %h and %s.
1721 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1724 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1726 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1727 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1729 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1731 * alpha-dis.c (print_insn_alpha_osf): Remove.
1732 (print_insn_alpha_vms): Remove.
1733 (print_insn_alpha): Make globally visible. Chose the register
1734 names based on info->flavour.
1735 * disassemble.c: Always return print_insn_alpha for the alpha.
1737 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1739 * d10v-dis.c (dis_long): Handle unknown opcodes.
1741 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1743 * d10v-opc.c: Changes to support signed and unsigned numbers.
1744 All instructions with the same name that have long and short forms
1745 now end in ".l" or ".s". Divs added.
1746 * d10v-dis.c: Changes to support signed and unsigned numbers.
1748 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1750 * d10v-dis.c: Change all functions to use info->print_address_func.
1752 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1754 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1755 move ccr/sr insns more strict so that the disassembler only
1756 selects them when the addressing mode is data register.
1758 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1759 * d10v-opc.c (pre_defined_registers): Declare.
1760 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1761 to pick a better name for the registers.
1763 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1765 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1766 operands for fexpand and fpmerge. From Christian Kuehnke
1767 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1769 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1771 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1772 print routine. Take new regnames and cpumask arguments.
1773 Kill the environment variable nonsense.
1774 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1775 (print_insn_alpha_vms): New function. Do VMS style regnames.
1776 * disassemble.c (disassembler): Test bfd flavour to pick
1777 between OSF and VMS routines. Default to OSF.
1779 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1781 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1782 * configure: Rebuild.
1783 * Makefile.in (install): Use @INSTALL_SHLIB@.
1785 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1787 * configure: (bfd_d10v_arch) Add new case.
1788 * configure.in: (bfd_d10v_arch) Add new case.
1789 * d10v-dis.c: New file.
1790 * d10v-opc.c: New file.
1791 * disassemble.c (disassembler) Add entry for d10v.
1793 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1795 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1796 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1798 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1800 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1801 distinguish between variants of the instruction set.
1802 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1803 distinguish between variants of the instruction set.
1805 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1807 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1808 the 8086 instruction set.
1809 * i386-dis.c: General cleanups. Make most things static. Add
1810 prototypes. Get rid of static variables aflags and dflags. Pass
1811 them as args (to almost everything).
1813 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1815 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1817 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1819 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1820 if the next arg is marked with SRC_IN_DST. Gross.
1822 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1823 we're looking for and find EXR.
1825 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1826 if we're looking for KBIT and we don't find it.
1828 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1831 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1832 3bit immediate operands.
1834 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1836 * Released binutils 2.7.
1838 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1839 <kkaempf@progis.ac-net.de>.
1841 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1843 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1845 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1847 * sparc-dis.c (print_insn_sparclite): New routine to print
1848 sparclite instructions.
1850 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1852 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1854 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1856 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1857 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1858 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1860 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1862 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1863 Use autoconf-set values.
1864 (docdir, oldincludedir): Removed.
1865 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1867 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1869 * alpha-opc.c: New file.
1870 * alpha-opc.h: Remove.
1871 * alpha-dis.c: Complete rewrite to use new opcode table.
1872 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1873 * configure: Rebuild with autoconf 2.10.
1874 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1875 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1877 (alpha-opc.o): New target.
1879 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1881 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1882 Set imm_added_to_rs1 even if the source and destination register
1885 * sparc-opc.c: Add some two operand forms of the wr instruction.
1887 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1889 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1892 * disassemble.c (disassembler): Handle H8/S.
1893 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1895 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1897 * sparc-opc.c: Add beq/teq as aliases for be/te.
1899 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1900 <sergei@msil.sps.mot.com>.
1902 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1904 * makefile.vms: New file.
1906 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1908 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1910 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1913 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1915 * i386-dis.c (OP_OFF): Call append_prefix.
1917 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1919 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1920 unsigned long to silence a warning from the Solaris PowerPC
1923 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1925 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1927 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1929 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1931 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1932 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1933 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1934 cpush, cpusha, cpull sparclet insns.
1936 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1938 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1940 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1942 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1943 Set F_FLOAT on other floating point instructions.
1945 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1947 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1949 (powerpc_opcodes): Add 860/821 specific SPRs.
1951 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1953 * configure.in: Permit --enable-shared to specify a list of
1954 directories. Set and substitute BFD_PICLIST.
1955 * configure: Rebuild.
1956 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1957 uses. Set to @BFD_PICLIST@.
1959 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1961 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1962 not "abs", which may be needed for the absolute in something
1963 like btst #0,@10:8. Print L_3 immediates separately from other
1964 immediates. Change ABSMOV reference to ABS8MEM.
1966 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1968 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1969 (current_arch_mask): New static global.
1970 (compute_arch_mask): New static function.
1971 (print_insn_sparc): Delete sparc_v9_p. New static local
1972 current_mach. Resort opcode table if current_mach changes.
1973 Generalize "insn not supported" test.
1974 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1975 Delete test for v9/!v9.
1976 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1978 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1979 (brfcx): Renamed to FBRX.
1980 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1981 coprocessor mnemonics are not supported on the sparclet).
1982 (condf): Renamed to CONDF.
1983 (SLCBCC2): Delete F_ALIAS flag.
1985 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1987 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1988 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1990 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1992 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1993 that the shared library version number is set correctly.
1995 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1997 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1998 Miles Bader <miles@gnu.ai.mit.edu>.
1999 * configure: Rebuild.
2001 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2003 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2006 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2008 * configure: Rebuild with autoconf 2.8.
2010 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2012 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2013 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2015 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2017 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2018 since they appear as targets in Makefile.in.
2019 * configure: Rebuild.
2021 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2023 * mpw-make.sed: Edit out shared library support bits.
2025 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2027 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2028 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2029 (sparc_opcodes): Add sparclet insns.
2030 (sparclet_cpreg_table): New static local.
2031 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2032 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2034 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2036 * i386-dis.c (index16): New static variable.
2037 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2039 (OP_indirE): Return result of OP_E.
2040 (OP_E): Check for 16 bit addressing mode, and disassemble
2041 correctly. Optimised 32 bit case a little. Don't print
2042 "(base,index,scale)" when sib specifies only an offset.
2044 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2046 * configure.in: Set and substitute SHLIB_DEP.
2047 * configure: Rebuild.
2048 * Makefile.in (SHLIB_DEP): New variable.
2049 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2050 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2051 COMMON_SHLIB, add them to piclist with appropriate modifications.
2052 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2053 here: just use piclist.
2055 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2057 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2058 (print_insn_sparc): Rewrite v9/not-v9 tests.
2059 (compare_opcodes): Likewise.
2060 * sparc-opc.c (MASK_<ARCH>): Define.
2061 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2062 (sparclet,v6notv9): Define.
2063 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2064 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2066 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2068 * configure.in: Call AC_PROG_CC before configure.host.
2069 * configure: Rebuild.
2071 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2073 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2075 * i386-dis.c (onebyte_has_modrm): New static array.
2076 (twobyte_has_modrm): New static array.
2077 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2079 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2081 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2084 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2086 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2089 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2091 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2092 m68010up, not just m68020up | cpu32.
2094 * Makefile.in (SONAME): New variable.
2095 ($(SHLINK)): Make a link to the transformed name, as well.
2096 (stamp-tshlink): New target.
2097 (install): Skip stamp-tshlink during install.
2099 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2101 * configure.in: Call AC_ARG_PROGRAM.
2102 * configure: Rebuild.
2103 * Makefile.in (program_transform_name): New variable.
2104 (install): Transform library name before installing it.
2106 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2108 * i960-dis.c (mem): Add HX dcinva instruction.
2110 Support for building as a shared library, based on patches from
2111 Alan Modra <alan@spri.levels.unisa.edu.au>:
2112 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2113 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2114 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2115 * configure: Rebuild.
2116 * Makefile.in (ALLLIBS): New variable.
2117 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2118 (COMMON_SHLIB, SHLINK): New variables.
2119 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2120 (STAGESTUFF): Remove variable.
2121 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2122 (stamp-piclist, piclist): New targets.
2123 ($(SHLIB), $(SHLINK)): New targets.
2124 ($(OFILES)): Depend upon stamp-picdir.
2125 (disassemble.o): Build twice if PICFLAG is set.
2126 (MOSTLYCLEAN): Add pic/*.o.
2127 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2128 (distclean): Remove pic and stamp-picdir.
2129 (install): Install shared libraries.
2130 (stamp-picdir): New target.
2132 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2134 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2135 Print unknown instruction as "unknown", rather than in hex.
2137 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2139 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2141 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2143 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2145 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2147 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2148 when necessary. From Ulrich Drepper
2149 <drepper@myware.rz.uni-karlsruhe.de>.
2151 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2153 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2154 sparc_num_opcodes. Update architecture enum values.
2155 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2156 (sparc_opcode_lookup_arch): New function.
2157 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2158 (sparc_opcodes): Add v9a shutdown insn.
2160 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2162 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2163 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2165 (print_insn_sparc64): Deleted.
2166 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2169 * sparc-opc.c (architecture_pname): Add v9a.
2171 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2173 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2174 incorrectly defined as 0x16 when it should be 0x15.
2175 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2176 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2177 excb (exception barrier) which is defined in the Alpha
2178 Architecture Handbook version 2.
2179 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2180 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2181 disassembled as or, for example.
2183 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2185 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2186 (_print_insn_mips): Change i from int to unsigned int.
2188 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2190 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2191 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2193 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2195 * i386-dis.c: Added Pentium Pro instructions.
2197 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2199 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2202 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2204 * sh-opc.h (sh_nibble_type): Added REG_B.
2205 (sh_arg_type): Added A_REG_B.
2206 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2208 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2210 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2212 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2214 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2216 * Makefile.in (distclean): Remove stamp-h. From Ronald
2217 F. Guilmette <rfg@monkeys.com>.
2219 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2221 From David Mosberger-Tang <davidm@azstarnet.com>:
2222 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2225 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2227 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2228 (sh_table): Added many SH3 opcodes.
2229 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2231 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2233 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2234 (subco,subco.): Mark this PPC, not PPCCOM.
2236 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2238 * configure: Rebuild with autoconf 2.7.
2240 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2242 * configure: Rebuild with autoconf 2.6.
2244 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2246 * configure.in: Sort list of architectures. Accept but do nothing
2247 for alliant, convex, pyramid, romp, and tahoe.
2249 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2251 * a29k-dis.c (print_special): Change num to unsigned int.
2253 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2255 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2258 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2260 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2261 * configure: Rebuilt.
2263 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2265 * configure.in: Add case for bfd_i860_arch.
2266 * configure: Rebuild.
2268 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2270 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2271 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2272 (NEXTDOUBLE): Likewise.
2273 (print_insn_m68k): Don't match fmoveml if there is more than one
2274 register in the list.
2275 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2277 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2279 * m68k-opc.c: Use #W rather than #w.
2280 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2282 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2284 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2285 and likewise for all the dbxx opcodes.
2287 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2289 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2291 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2293 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2294 the VR4100 specific instructions to the mips_opcodes structure.
2296 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2298 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2299 ugly Metrowerks bug in CW6, is fixed in CW7.
2301 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2303 * ppc-opc.c (whole file): Add flags for common/any support.
2305 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2307 * Makefile.in (BISON): Remove macro.
2308 (FLAGS_TO_PASS): Remove BISON.
2310 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2312 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2314 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2315 instructions that take no args by looking at the match mask.
2316 (print_insn_arg): Always print "%" before register names.
2317 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2318 [case '_']: Don't print "@#" before address.
2319 [case 'J']: Use "%s" as format string, not register name.
2320 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2322 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2324 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2327 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2329 From David Mosberger-Tang <davidm@azstarnet.com>
2331 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2332 (alpha_insn_set): added definitions for VAX floating point
2333 instructions (Unix compilers don't generate these, but handcoded
2334 assembly might still use them).
2336 * alpha-dis.c (print_insn_alpha): added support for disassembling
2337 the miscellaneous instructions in the Alpha instruction set.
2339 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2341 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2342 no longer create sysdep.h, sed ppc-opc.c to work around a
2343 serious Metrowerks C bug.
2344 * mpw-make.in: Remove.
2345 * mpw-make.sed: New file, used by mpw-configure to edit
2346 Makefile.in into an MPW makefile.
2348 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2350 * Makefile.in (maintainer-clean): New synonym for realclean.
2352 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2354 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2355 which use '0', '1', and '2' instead. Specify the proper size for
2356 a pmove immediate operand. Correct the pmovefd patterns to be
2357 moves to a register, not from a register.
2358 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2360 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2362 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2363 %psr, %wim, %tbr as F_NOTV9.
2365 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2367 * Makefile.in (Makefile): Just rebuild Makefile when running
2369 (config.h, stamp-h): New targets.
2370 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2371 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2372 rebuilding config.h.
2373 * configure: Rebuild.
2375 * mips-opc.c: Change unaligned loads and stores with "t,A"
2376 operands to use "t,A(b)".
2378 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2380 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2382 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2384 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2385 until 3 instead of until 2.
2387 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2389 * Makefile.in (ALL_CFLAGS): Define.
2390 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2391 (MOSTLYCLEAN): Add config.log.
2392 (distclean): Don't remove config.log.
2393 * configure.in: Substitute HDEFINES.
2394 * configure: Rebuild.
2396 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2398 * sh-opc.h (sh_arg_type): Add F_FR0.
2399 (sh_table, case fmac): Add F_FR0 as first argument.
2401 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2403 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2405 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2407 * sparc-dis.c: Remove all references to NO_V9.
2409 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2411 * aclocal.m4: Just include ../bfd/aclocal.m4.
2412 * configure: Rebuild.
2414 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2416 * sparc-dis.c (X_DISP19): Define.
2417 (print_insn, case 'G'): Use it.
2418 (print_insn, case 'L'): Sign extend displacement.
2420 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2422 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2423 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2424 host_makefile_frag or frags.
2425 * aclocal.m4: New file.
2426 * configure: Rebuild.
2427 * Makefile.in (INSTALL): Set to @INSTALL@.
2428 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2429 (INSTALL_DATA): Set to @INSTALL_DATA@.
2431 (AR_FLAGS): Set to rc rather than qc.
2432 (CC): Define as @CC@.
2433 (CFLAGS): Set to @CFLAGS@.
2434 (@host_makefile_frag@): Remove.
2435 (config.status): Remove dependency upon @frags@.
2437 * configure.in: ../bfd/config.bfd now just sets shell variables.
2438 Use them rather than looking through target Makefile fragments.
2439 * configure: Rebuild.
2441 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2443 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2445 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2447 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2448 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2451 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2452 (lookup_{name,value}): New functions.
2453 (prefetch_table): New static local.
2454 (sparc_{encode,decode}_prefetch): New functions.
2455 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2457 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2459 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2462 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2464 * sh-dis.c: Correct comment on first line of file.
2466 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2468 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2470 * sparc-opc.c (asi, membar): New static locals.
2471 (sparc_{encode,decode}_{asi,membar}): New functions.
2472 (sparc_opcodes, membar insn): Fix.
2473 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2474 Support decoding of membar masks.
2477 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2479 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2481 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2483 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2484 and likewise for the other branches. Add bhs as an alias for bcc,
2485 and likewise for the size variants. Add dbhs as an alias for
2488 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2490 * sh-opc.h (FP sts instructions): Update to match reality.
2492 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2494 * m68k-dis.c: (fpcr_names): Add % before all register names.
2495 (reg_names): Likewise.
2496 (print_insn_arg): Don't explicitly print % before register names.
2497 Add % before register names in static array names. In case 'r',
2498 print data registers as `@(Dn)', not `Dn@'. When printing a
2499 memory address, don't print @# before it.
2500 (print_indexed): Change base_disp and outer_disp from int to
2501 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2502 syntax. Sign extend 8 byte displacement correctly.
2503 (print_base): Print using MIT syntax. Print zpc when appropriate.
2504 Change parameter disp from int to bfd_vma.
2506 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2509 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2511 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2512 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2513 * sh-opc.h (sh_arg_type): Add new operand types.
2514 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2516 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2518 * Makefile.in (distclean): Remove generated file config.h.
2520 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2522 * Makefile.in (distclean): Remove generated file config.h.
2524 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2526 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2528 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2530 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2531 rather than numopcodes. Use m68k_opcodes rather than removed
2532 opcode function. Don't check F_ALIAS.
2533 (print_insn_arg): Change first parameter to be const char *.
2534 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2535 (m68k-opc.o): New target.
2536 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2537 * configure: Rebuild.
2539 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2541 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2542 (opcode_bits, opcode_hash_table): New variables.
2543 (opcodes_initialized): Renamed from opcodes_sorted.
2544 (build_hash_table): New function.
2545 (is_delayed_branch): Use hash table.
2546 (print_insn): Renamed from print_insn_sparc, made static.
2547 Build and use hash table. If !sparc64, ignore sparc64 insns,
2548 and vice-versa if sparc64.
2549 (print_insn_sparc, print_insn_sparc64): New functions.
2550 (compare_opcodes): Move sparc64 opcodes to end.
2551 Print commutative insns with constant second.
2552 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2554 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2556 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2557 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2558 avoids printing a delay slot in a delay slot.
2559 * sh-opc.h (sh_table): Fully bracket last entry.
2561 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2563 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2565 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2567 * configure.in: Get host_makefile_frag from ${srcdir}.
2569 * configure.in: Autoconfiscated. Check for string[s].h. Create
2570 config.h from config.in. Don't set up sysdep.h link.
2571 * sysdep.h: New file.
2572 * configure, config.in: New files, generated from configure.in.
2573 * Makefile.in: Updated to be processed autoconf-style.
2574 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2575 (Makefile): Depend on config.status.
2576 (config.status): New rule.
2577 * configure.bat: Update Makefile substitutions.
2579 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2581 * mips-opc.c (L1): Define.
2582 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2583 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2586 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2588 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2589 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2590 have multiple add units but only a single logical unit.
2592 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2593 shifted by 18, without any insertion or extraction function.
2594 (insert_cr, extract_cr): Remove.
2596 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2598 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2601 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2603 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2604 * sh-opc.h: Add copyright.
2606 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2608 * Makefile.in (crunch-m68k): Delete extra target accidentally
2609 checked in a while ago.
2611 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2613 * sh-opc.h (sh_table): Add SH3 support.
2615 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2617 * sh-opc.h: Added bsrf and braf.
2619 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2621 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2622 bogus [ls]fm{ea,fd} patterns.
2624 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2625 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2626 initialize it from memory. Make function static.
2627 (print_insn_{big,little}_arm): New functions.
2628 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2629 the correct endianness.
2631 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2633 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2636 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2638 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2639 17th, so that it builds again using GCC as the compiler.
2641 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2643 * mips-dis.c (print_insn_little_mips): Cast return value from
2644 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2645 expects an unsigned long, and that might be fewer words of
2646 argument storage (e.g., if bfd_vma is long long on a 32-bit
2648 (print_insn_big_mips): Likewise with bfd_getb32 value.
2649 (_print_insn_mips): Now static.
2651 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2653 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2654 gcc memory hog problem with initializer is fixed.
2656 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2658 Merge in support for Mac MPW as a host.
2659 (Old change descriptions retained for informational value.)
2661 * mpw-config.in (archname): Compute from the config.
2662 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2664 * mpw-config.in (target_arch): Compute from canonical target.
2665 (m68k, mips, powerpc, sparc): Add architectures.
2666 * mpw-make.in (disassemble.c.o): Add.
2667 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2669 * mpw-config.in (BFD_MACHINES): Set to a default value.
2670 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2672 * mpw-make.in (CSEARCH): Add extra-include to search path.
2674 * mpw-config.in (varargs.h): Don't create.
2675 (sysdep.h): Create using forward-include.
2676 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2678 * mpw-config.in: New file, MPW version of configure.in.
2679 * mpw-make.in: New file, MPW version of Makefile.in.
2681 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2683 * alpha-dis.c (print_insn_alpha): Put empty statement after
2686 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2688 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2689 (low_sign_extend): Likewise.
2690 (get_field): Delete unused function.
2691 (set_field, deposit_14, deposit_21): Likewise.
2693 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2695 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2698 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2700 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2702 * alpha-opc.h (OSF_ASMCODE): define
2703 print pal-code names as defined in App C of the
2704 Alpha Architecture Reference Manual
2706 * alpha-dis.c: cleaned up output
2707 print stylized code forms as defined in App A.4.3 of the
2708 Alpha Architecture Reference Manual
2710 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2712 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2714 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2717 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2719 * m68k-dis.c (opcode): New function. Returns address of opcode
2720 table entry given index, even if the opcode table was split to
2721 work around gcc bugs.
2722 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2724 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2725 (reg_names): Now const.
2726 (print_insn_arg): Arrays cacheFieldName and names now const.
2727 (print_indexed): Array scales now const.
2729 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2731 * ppc-opc.c: Sort recently added instructions by minor opcode
2732 number within major opcode number.
2734 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2736 * hppa-dis.c: Include libhppa.h.
2738 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2740 * mips-opc.c: Change dli to use M_DLI, and add dla.
2742 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2744 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2746 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2748 * mips-opc.c: Add r4650 mul instruction.
2750 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2752 * mips-opc.c: Add uld and usd macros for unaligned double load and
2755 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2757 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2758 mfdcr, mtdcr, icbt, iccci.
2760 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2762 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2763 signed char fields to shorts, more portable.
2765 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2767 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2768 char fields as signed chars, since they may have negative values.
2770 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2772 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2773 (mycroft@netbsd.org).
2775 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2777 From "Logg, Ed" <elogg@ea.com>:
2778 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2779 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2782 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2784 * ppc-opc.c: Changes based on patch from David Edelsohn
2785 <edelsohn@mhpcc.edu>.
2786 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2789 (insert_tbr): New static function.
2790 (extract_tbr): New static function.
2791 (XFXFXM_MASK, XFXM): Define.
2792 (XSPRBAT_MASK, XSPRG_MASK): Define.
2793 (powerpc_opcodes): Add instructions to access special registers by
2794 name. Add mtcr and mftbu.
2796 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2798 * mips-opc.c (P3): Define.
2799 (mips_opcodes): Add mad and madu.
2801 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2803 * configure.in: Add W65 support.
2804 * disassemble.c: Likewise.
2805 * w65-opc.h, w65-dis.c: New files.
2807 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2809 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2812 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2814 * mips-opc.c: Add dli as a synonym for li.
2816 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2818 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2819 print something for reserved opcode values, even if it won't
2822 * mips-dis.c (_print_insn_mips): When initializing, shift right
2823 and mask, to avoid sign extension problems on the Alpha.
2825 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2828 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2830 * sh-opc.h (mov.l gbr): Get direction right.
2831 * sh-dis.c (print_insn_shx): New function.
2832 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2833 print opcodes with right byte order.
2835 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2837 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2838 to avoid conflicts with getopt.
2840 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2842 * hppa-dis.c (print_insn_hppa): Read the instruction using
2843 bfd_getb32, so that it works on a little endian or 64 bit host.
2844 Remove unused local variable op.
2846 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2848 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2849 addu does not work correctly if -mips3.
2851 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2853 * a29k-dis.c (print_special): Add special register names defined
2854 on 29030, 29040 and 29050.
2855 (print_insn): Handle new operand type 'I'.
2857 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2859 * Makefile.in (INSTALL): Use top level install.sh script.
2861 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2863 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2864 that it works on a little endian host.
2866 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2868 * configure.in: Use ${config_shell} when running config.bfd.
2870 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2872 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2874 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2876 * a29k-dis.c (print_insn): Print the opcode.
2878 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2880 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2882 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2884 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2886 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2888 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2889 which store a value into memory.
2891 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2893 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2894 * arm-dis.c, arm-opc.h: New files.
2896 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2898 * Makefile.in (ns32k-dis.o): Add dependency.
2899 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2900 string, not as array of chars.
2902 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2904 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2906 * sparc-opc.c: Added sparclite extended FP operations, and
2907 versions of v9 impdep* instructions permitting specification of
2910 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2912 * i960-dis.c (reg_names): Now const.
2913 (struct sparse_tabent): New type, copied from array type in mem
2915 (ctrl): Local static array ctrl_tab now const.
2916 (cobr): Local static array cobr_tab now const.
2917 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2918 static variable mem_tab no longer explicitly initialized. Changed
2919 mem_init to const array of struct sparse_tabent.
2920 (reg): Local static variable reg_tab no longer explicitly
2921 initialized. Changed reg_init to const array of struct
2923 (ea): Local static array scale_tab now const.
2925 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2928 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2930 * configure.bat: the disassember needs to be enabled for
2931 "objdump -d" to work in djgpp.
2933 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2935 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2936 (invalid_float): Enabled general version, doesn't require running
2937 on ns32k host. Changed to take char* argument, and test for
2938 explicitly specified sizes, instead of using sizeof() on host CPU
2940 (INVALID_FLOAT): Cast first argument.
2941 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2942 list_P032, list_M032): Now const.
2943 (optlist, list_search): Made appropriate arguments now point to
2945 (print_insn_arg): Changed static array of one-character-string
2946 pointers into a static const array of characters; fixed sprintf
2947 statement accordingly.
2949 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2951 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2952 from distribution. A ns32k-dis.c from a previous distribution has
2953 been brought up to date and supports the new interface.
2955 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2957 * configure.in: add bfd_ns32k_arch target support.
2959 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2960 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2962 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2964 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2967 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2969 * h8300-dis.c, mips-dis.c: Don't use true and false.
2971 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2973 * configure.in: Change --with-targets to --enable-targets.
2975 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2977 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2978 opcodes to the first instruction with that opcode, to speed
2979 disassembly of large files. From ralphc@pyramid.com (Ralph
2982 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2984 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2986 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2988 * configure.bat: update to latest makefile.in
2990 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2992 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2993 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2994 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2995 slot insn is in a delay slot.
2996 * z8k-opc.h: (resflg): Fix patterns.
2997 * h8500-opc.h Fix CR insn patterns.
2999 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3001 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3002 "cmpl" before POWER versions, so that gas -many uses them.
3004 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3006 * disassemble.c: New file.
3007 * Makefile.in (OFILES): Add disassemble.o.
3008 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3009 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3010 binutils/configure.in.
3012 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3013 opcode being examined.
3015 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3017 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3018 (insert_ral, insert_ram, insert_ras): New functions.
3019 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3020 RAS for store with update.
3022 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3024 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3025 (edelsohn@npac.syr.edu).
3027 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3029 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3032 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3034 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3036 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * ppc-opc.c (powerpc_operands): The signedp field has been
3039 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3040 instead. Add new operand SISIGNOPT.
3041 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3042 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3043 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3046 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3048 * i386-dis.c (struct private): Renamed to dis_private. `private'
3049 is a reserved word for dynix cc.
3051 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3053 * configure.in: Change error message to refer to bfd/config.bfd
3054 rather than bfd/configure.in.
3056 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3058 * ppc-opc.c: Define POWER2 as short alias flag.
3059 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3062 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3064 * i960-dis.c (print_insn_i960): Don't read a second word for
3065 opcodes 0, 1, 2 and 3.
3067 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3071 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3073 * m68881-ext.c: Removed; no longer used.
3074 * Makefile.in: Changed accordingly.
3076 * m68k-dis.c (ext_format_68881): Don't declare.
3077 (print_insn_m68k): If an instruction uses place 'i', it uses at
3078 least four fixed bytes.
3079 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3080 extended float, convert to double using floatformat_to_double, not
3081 ieee_extended_to_double, and fetch the data before converting it.
3083 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3085 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3086 davidj@ICSI.Berkeley.EDU (David Johnson).
3088 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3091 PowerPC uses bdnz[l][a].
3093 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3095 * dis-buf.c, i386-dis.c: Include sysdep.h.
3097 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3099 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3101 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3102 by Motorola PowerPC 601 with PPC_OPCODE_601.
3103 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3104 Disassemble Motorola PowerPC 601 instructions as well as normal
3105 PowerPC instructions.
3107 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3109 * i960-dis.c (reg, mem): Just use a static array instead of
3112 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3114 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3115 condition name index if this is for a negated condition.
3117 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3118 Floating point format for 'H' operand is backwards from normal
3119 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3120 operands (fmpyadd and fmpysub), handle bizarre register
3121 translation correctly for single precision format.
3123 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3124 or 'I' operands if the next format specifier is 'M' (fcmp
3125 condition completer).
3127 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3129 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3130 single number giving a bitmask for the MB and ME fields of an M
3131 form instruction. Change NB to accept 32, and turn it into 0;
3132 also turn 0 into 32 when disassembling. Seperated SH from NB.
3133 (insert_mbe, extract_mbe): New functions.
3134 (insert_nb, extract_nb): New functions.
3135 (SC_MASK): Mask out SA and LK bits.
3136 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3137 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3138 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3139 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3140 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3141 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3142 (powerpc_macros): Define table of macro definitions.
3143 (powerpc_num_macros): Define.
3145 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3146 if PPC_OPERAND_NEXT is set.
3148 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3150 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3151 char. Retrieve contents using bfd_getl32 instead of shifting.
3153 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3155 * ppc-opc.c: New file. Opcode table for PowerPC, including
3156 opcodes for POWER (RS/6000).
3157 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3158 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3159 (CFILES): Add ppc-dis.c.
3160 (ppc-dis.o, ppc-opc.o): New targets.
3161 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3163 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3165 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3166 No space before 'u', 'f', or 'N'.
3168 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3170 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3171 farther than we should.
3173 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3175 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3177 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3179 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3181 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3182 needs it, to prevent reading past the end of a section.
3184 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3187 Removed t,A case for la; always use t,A(b) case.
3189 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3191 From Ted Lemen <mellon@pepper.ncd.com>
3192 * mips-dis.c (print_insn_arg): Handle 'k'.
3193 * mips-opc.c: Make cache use k, not t.
3195 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3197 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3198 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3199 FLOAT_FORMAT_CODE to put out floating point register names.
3201 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3203 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3205 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3207 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3209 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3211 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3212 larger than 32. Moved dsxx32 variants first for disassembler.
3214 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3216 * z8kgen.c, z8k-opc.h: Add full lda information.
3218 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3220 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3221 movb instructions. Any necessary space will be emitted by
3222 the code to handle nullification completers.
3224 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3226 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3228 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3230 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3231 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3233 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3235 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3237 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3239 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3240 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3242 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3244 * m88k-dis.c (m88kdis): comment change. Remove space after
3246 (printop): handle new arg types DEC and XREG for m88110.
3248 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3250 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3251 type for absolute branch addresses. Delete special
3252 "ble" and "be" code in 'W' operand code.
3254 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3256 * mips-opc.c: Set hazard information correctly for branch
3257 likely instructions.
3259 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3261 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3262 info->fprintf_func for printing and info->print_address_func for
3265 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3269 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3272 Corrected second case of "b" for disassembler.
3274 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3276 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3277 to BFD swapping routines to correspond to BFD name changes.
3279 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3281 * mips-opc.c: Change div machine instruction to be z,s,t rather
3282 than s,t. Change div macro to be d,v,t rather than d,s,t.
3283 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3284 rem and remu which generates only the corresponding div
3285 instruction. This is for compatibility with the MIPS assembler,
3286 which only generates the simple machine instruction when an
3287 explicit destination of $0 is used.
3288 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3290 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3293 WR_31 hazard for bal, bgezal, bltzal.
3295 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3297 * hppa-dis.c (print_insn_hppa): Use print function
3298 from within the disassemble_info, not fprintf_filtered.
3300 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3302 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3303 Law, law@cs.utah.edu.)
3305 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3307 * mips-opc.c ("absu"): Removed.
3310 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3312 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3313 Changed hazard information to distinguish between memory load
3314 delays and coprocessor load delays.
3316 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3318 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3320 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3322 * configure.in: Don't pass cpu to config.bfd.
3324 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3326 * m88k-dis.c (m88kdis): Make class unsigned.
3328 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3330 * alpha-dis.c (print_insn_alpha): One branch format case was
3331 missing the instruction name.
3333 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3335 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3336 Add the arch-specific auxiliary files.
3337 (OFILES): Remove the arch-specific auxiliary files
3338 and use BFD_MACHINES instead of DIS_LIBS.
3339 * configure.in: Set BFD_MACHINES based on --with-targets option.
3341 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3343 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3346 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3348 * sparc-opc.c: Change CONST to const to deal with gcc
3349 -Dconst=__const -traditional.
3351 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3353 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3354 coprocessor instructions out of #if 0, and made them use new
3357 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3359 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3361 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3363 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3364 instruction, for use by the disassembler.
3366 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3367 hand-coded sign extensions that depended on 32-bit host ints.
3368 FIXME, we still depend on big-endian host bitfield ordering.
3369 (sparc_print_insn): Set the insn_info_valid field, and the
3370 other fields that describe the instruction being printed.
3372 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3374 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3375 `jmp' instead of just one of them.
3377 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3379 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3380 (fput_fp_reg_r): Renamed from fput_reg_r.
3381 (fput_fp_reg): New function.
3382 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3384 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3386 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3388 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3390 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3392 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3393 don't output a space.
3395 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3397 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3399 * mips-opc.c: New file, containing opcode table from
3400 ../include/opcode/mips.h.
3401 * Makefile.in: Add it.
3403 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3405 * m88k-dis.c: New file, moved in from gdb and changed to use the
3406 new dis-asm.h disassembler interface.
3407 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3408 (m88k-dis.o): New target.
3410 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3412 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3413 argument string const char * to correspond to opcode/mips.h.
3415 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3417 * mips-dis.c: Updated to account for name changes in new version
3419 * Makefile.in: Added header file dependencies.
3421 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3423 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3425 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3427 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3428 extend, rather than shifts.
3430 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3432 * Makefile.in: Undo 15 June change.
3434 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3436 * m68k-dis.c (print_insn_arg): Change return value to byte count
3438 * m68k-dis.c: Re-write to detect invalid operands before
3439 printing anything, so we can handle this the same way we
3440 handle invalid opcodes.
3442 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3444 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3446 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3448 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3451 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3453 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3455 * configure.in: Do make sysdep.h link.
3456 * Makefile.in: Search ../include. Don't search ../bfd.
3458 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3460 Changes from Jeff Law, law@cs.utah.edu:
3461 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3462 Do not print a space before the completers specified by
3465 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3467 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3468 defined, since gdb has been fixed.
3470 Changes from Jeff Law, law@cs.utah.edu:
3471 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3472 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3473 be a *disassemble_info, not a *FILE.
3474 * hppa-dis.c: Support 'd', '!', and 'a'.
3475 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3476 * hppa-dis.c: Delete cases which are no longer needed.
3478 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3480 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3482 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3484 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3487 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3489 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3490 * configure.in: No longer need to configure to get sysdep.h.
3492 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3494 * Patches from Jeffrey Law <law@cs.utah.edu>.
3495 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3496 templates for 1.1 FP computational instructions.
3498 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3500 * h8500-dis.c (print_insn_h8500): Address argument is type
3502 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3505 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3506 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3508 * sparc-dis.c (compare_opcodes): Move static declaration to
3511 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3513 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3514 instruction, remove unimp hack from 'l' argument.
3516 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3518 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3521 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3523 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3524 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3527 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3529 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3530 arrays of string pointers to 2-d arrays of chars, to save
3533 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3535 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3536 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3538 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3540 * hppa-dis.c: New file from Utah, adapted to new disassembler
3542 * Makefile.in: Include it.
3544 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3546 * sh-dis.c, sh-opc.h: New files.
3548 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3550 * alpha-dis.c, alpha-opc.h: New files.
3552 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3554 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3557 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3559 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3561 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3563 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3566 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3568 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3569 and double percent signs a few places.
3571 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3573 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3574 Use info->print_address_func not print_address.
3576 * dis-buf.c (generic_print_address): New function.
3578 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3580 * Makefile.in: Add sparc-dis.c.
3581 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3583 Add `add' instruction to the set that get checked
3584 for a preceding `sethi' in order to print an absolute address.
3585 * (print_insn): Disassembly prefers real instructions.
3586 (is_delayed_branch): Speed up.
3587 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3588 Still missing some float ops, and needs testing.
3589 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3590 F_ALIAS. Use printf, not fprintf, when not passing a file
3592 (compare_opcodes): Check that identical instructions have
3593 identical opcodes, complain otherwise.
3596 * Include reg_names.
3598 Use dis-asm.h/read_memory_func interface.
3600 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3602 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3603 deliberately return non-zero to setjmp from longjmp. Otherwise
3604 this code fails to compile.
3606 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3608 * m68k-dis.c: Fix prototype for fetch_arg().
3610 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3612 * dis-buf.c: New file, for new read_memory_func interface.
3613 Makefile.in (OFILES): Include it.
3614 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3615 Use new read_memory_func interface.
3617 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3619 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3620 * h8500-opc.h: Fix couple of opcodes.
3622 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3624 * Makefile.in: add dvi & installcheck targets
3626 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3628 * Makefile.in: Update for h8500-dis.c.
3630 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3632 * h8500-dis.c, h8500-opc.h: New files
3634 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3636 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3637 ../include/dis-asm.h.
3638 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3639 and ../gdb/m68k-pinsn.c).
3640 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3641 and ../gdb/i386-pinsn.c).
3642 * m68881-ext.c: New file. Moved definition of
3643 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3644 * Makefile.in: Adjust for new files.
3645 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3646 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3647 can be dis-assembled.
3649 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3651 * mips-dis.c (print_insn_arg): Now returns void.
3653 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3655 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3656 files that use the macros.
3658 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3660 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3661 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3662 (CFILES): Added mips-dis.c.
3664 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3666 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3667 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3669 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3671 * Makefile.in: Improve *clean rules.
3672 * configure.in: Allow a default host.
3674 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3676 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3677 files include other sysdep files
3679 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3681 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3683 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3685 * configure.in: For host support, use ../bfd/configure.host
3686 so it stays in sync with the ../bfd/hosts database.
3688 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3690 * configure.in: use cpu-vendor-os triple instead of nested cases
3692 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3694 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3695 *always* the wrong one.
3697 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3699 * z8kgen.c: added copyright info
3701 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3703 * z8k-dis.c (unparse_instr): prettier tabs
3704 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3706 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3708 * configure.in: Add ncr* configuration.
3709 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3710 picayune ANSI compilers happy.
3712 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3714 * configure.in (i386): Make i386 and i486 synonymous for now.
3715 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3717 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3719 * Makefile.in (install): Fix typo.
3721 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3723 * Makefile.in (make): Remove obsolete crud.
3724 (sparc-opc.o): Avoid Sun Make VPATH bug.
3726 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3728 * Makefile.in: since there are no SUBDIRS, remove rule and
3729 references of subdir_do.
3731 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3733 * Makefile.in (install): Get the library name right here too.
3734 Don't install bfd.h, since it's unrelated to this library. No
3735 subdirs to recurse into, either.
3736 (CFILES): The source file has a .c suffix, not .o.
3738 * sparc-opc.c: New file, moved from BFD.
3739 * Makefile.in (OFILES): Build it.
3741 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3743 * z8k-dis.c: fixed forward refferences of some declarations.
3745 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3747 * Makefile.in: get the name of the library right
3749 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3751 * z8k-dis.c: knows how to disassemble z8k stuff
3752 * z8k-opc.h: new file full of z8000 opcodes
3756 version-control: never
projects / external / binutils.git / blob