1 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
5 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
7 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
9 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
11 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
13 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
15 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
18 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
20 * hppa-dis.c: (print_insn_hppa): Add missing break after
23 * hppa-dis.c: Finish constifying various completers, register
26 1999-09-14 Michael Meissner <meissner@cygnus.com>
28 * configure.in (Canonicalization of target names): Remove adding
29 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
30 generates $ac_config_sub with a ${CONFIG_SHELL} already.
31 * configure: Regenerate.
33 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
35 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
37 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
39 1999-09-07 Nick Clifton <nickc@cygnus.com>
41 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
42 names for the mulu and muls patterns.
44 1999-09-04 Steve Chamberlain <sac@pobox.com>
48 * disassemble.c (disassembler): Handle bfd_arch_pj.
49 * configure.in: Handle bfd_pj_arch.
50 * Makefile.am: Rebuild dependencies.
51 (CFILES): Add pj-dis.c and pj-opc.c.
52 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
53 * configure, Makefile.in: Rebuild.
55 1999-09-04 H.J. Lu <hjl@gnu.org>
57 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
59 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
61 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
63 1999-08-04 Doug Evans <devans@casey.cygnus.com>
65 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
66 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
67 * m32r-opinst.c: Rebuild.
69 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
71 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
74 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
76 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
77 extract_10U_store): New.
78 (print_insn_hppa): Add new completers.
80 * hppa-dis.c (signed_unsigned_names,mix_half_names,
81 saturation_names): New.
82 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
84 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
86 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
88 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
89 to decide to print a space.
91 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
93 * i386-dis.c: Add AMD athlon instruction support.
95 1999-08-10 Ian Lance Taylor <ian@zembu.com>
97 From Wally Iimura <iimura@microunity.com>:
98 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
99 overflow at end of address space.
100 (generic_print_address): Use sprintf_vma.
102 1999-08-08 Ian Lance Taylor <ian@zembu.com>
104 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
105 MKDEP. Rebuild dependencies.
106 * Makefile.in: Rebuild.
108 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
110 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
111 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
112 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
113 (print_insn_hppa): Add 64 bit condition completers.
115 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
117 * hppa-dis.c (print_insn_hppa): Change condition args to use
120 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
122 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
125 1999-07-21 Ian Lance Taylor <ian@zembu.com>
128 * configure.bat: Remove; obsolete.
130 1999-07-11 Ian Lance Taylor <ian@zembu.com>
132 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
133 (generic_strcat_address): Add cast to avoid warning.
134 * i386-dis.c: Initialize all structure fields to avoid warnings.
135 Add ATTRIBUTE_UNUSED as appropriate.
137 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
139 * sparc-dis.c (print_insn_sparc): Differentiate between
140 addition and oring when guessing symbol for comment.
142 1999-07-05 Nick Clifton <nickc@cygnus.com>
144 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
147 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
149 * i386-dis.c: Mention intel mode specials in macro char comment.
151 1999-06-21 Ian Lance Taylor <ian@zembu.com>
153 * alpha-dis.c: Don't include <stdlib.h>.
154 * arm-dis.c: Include "sysdep.h".
155 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
157 * Makefile.am: Rebuild dependencies.
158 * Makefile.in: Rebuild.
160 1999-06-16 Nick Clifton <nickc@cygnus.com>
162 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
165 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
167 * arm-dis.c (arm_regnames): Turn into a pointer to a register
169 (arm_regnames_standard): New variable: Array of ARM register
170 names according to ARM instruction set nomenclature.
171 (arm_regnames_apcs): New variable: Array of ARM register names
172 according to ARM Procedure Call Standard.
173 (arm_regnames_raw): New variable: Array of ARM register names
174 using just 'r' and the register number.
175 (arm_toggle_regnames): New function: Toggle the chosen register set
177 (parse_disassembler_options): New function: Parse any target
178 disassembler command line options.
179 (print_insn_big_arm): Call parse_disassembler_options if any
181 (print_insn_little_arm): Call parse_disassembler_options if any
184 1999-06-13 Ian Lance Taylor <ian@zembu.com>
186 * i386-dis.c (FWAIT_OPCODE): Define.
187 (used_prefixes): New static variable.
188 (fetch_data): Don't print an error message if we have already
189 fetched some bytes successfully.
190 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
191 (prefix_name): New static function.
192 (print_insn_i386): If setjmp fails, indicating a data error, but
193 we have managed to fetch some bytes, print the first one as a
194 prefix or a .byte pseudo-op. If fwait is followed by a non
195 floating point instruction, print the first prefix. Set
196 used_prefixes when prefixes are used. If any prefixes were not
197 used after disassembling the instruction, print the first prefix
198 instead of printing the instruction.
199 (putop): Set used_prefixes when prefixes are used.
200 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
201 (OP_DIR, OP_SIMD_Suffix): Likewise.
203 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
205 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
206 Support signx %reg, clruw %reg.
208 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
210 * sparc-opc.c: Add aliases Solaris as supports.
212 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
214 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
215 * Makefile.in: Regenerated.
217 1999-06-03 Philip Blundell <philb@gnu.org>
219 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
220 when target is PC-relative.
222 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
224 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
227 * m68k-dis.c (fetch_arg): Add places `n', `o'.
229 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
230 Add mcf5206e to appropriate instructions.
231 Add alias for MAC, MSAC.
233 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
236 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
237 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
239 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
241 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
243 * i386-dis.c (Ed): Define.
244 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
246 (OP_rm): Rename to OP_Rd.
249 (putop): Add const to template and p.
250 (print_insn_x86): Delete.
251 (print_insn_i386): Merge old function print_insn_x86. Add const
253 (struct dis386): Add const to name.
254 (dis386_att, dis386_intel): Add const.
255 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
256 (names32, names16, names8, names_seg, index16): Add const.
257 (grps, prefix_user_table, float_reg): Add const.
258 (float_mem_att, float_mem_intel): Add const.
259 (oappend): Add const to s.
260 (OP_REG): Add const to s.
261 (ptr_reg): Add const to s.
262 (dofloat): Add const to dp.
263 (OP_C): Don't skip modrm, it's now done in OP_Rd.
266 (OP_Rd): Check for valid mod. Call Op_E to print.
267 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
268 (OP_MS): Check for valid mod. Call Op_EM to print.
269 (OP_3DNowSuffix): Set obufp and use oappend rather than
270 strcat. Call BadOp() for errors.
271 (OP_SIMD_Suffix): Likewise.
272 (BadOp): New function.
274 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
276 * i386-dis.c (dis386_intel): Remove macro chars, except for
277 jEcxz. Change cWtR and cRtd to cW and cR.
278 (dis386_twobyte_intel): Remove macro chars here too.
279 (putop): Handle R and W macros for intel mode.
281 * i386-dis.c (SIMD_Fixup): New function.
282 (dis386_twobyte_att): Use it on movlps and movhps, and change
283 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
284 (dis386_twobyte_intel): Same here.
286 * i386-dis.c (Av): Remove.
290 (OP_SIMD_Suffix): New function.
291 (OP_DIR): Remove dead code.
292 (eAX_reg..eDI_reg): Renumber.
293 (onebyte_has_modrm): Table numbering comments.
294 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
295 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
296 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
297 and handle SIMD cmp insns in OP_SIMD_Suffix.
298 (info->bytes_per_line): Bump from 5 to 6.
300 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
301 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
303 PIII SIMD support from Doug Ledford <dledford@redhat.com>
304 * i386-dis.c (XM, EX, None): Define.
305 (OP_XMM, OP_EX, OP_None): New functions.
306 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
307 (GRP14): Rename to GRPAMD.
308 (GRP*): Add USE_GROUPS flag.
310 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
311 (twobyte_has_modrm): Add SIMD entries.
312 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
313 (grps): Add SIMD insns.
314 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
315 oappend repz if uses_f3_prefix. Add code to handle new groups for
318 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
319 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
320 operand from Av to Jv.
322 1999-05-07 Nick Clifton <nickc@cygnus.com>
324 * mcore-dis.c (print_insn_mcore): Use .short to display
325 unidentified instructions, not .word.
327 1999-04-26 Tom Tromey <tromey@cygnus.com>
329 * aclocal.m4, configure: Updated for new version of libtool.
331 1999-04-14 Doug Evans <devans@casey.cygnus.com>
333 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
334 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
336 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
338 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
341 1999-04-10 Doug Evans <devans@casey.cygnus.com>
343 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
344 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
346 1999-04-06 Ian Lance Taylor <ian@zembu.com>
348 * opintl.h (LC_MESSAGES): Never define.
350 1999-04-04 Ian Lance Taylor <ian@zembu.com>
352 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
353 (separator_char, scale_char): Likewise.
354 (print_insn_x86): Likewise.
355 (print_insn_i386): Likewise. Add declaration.
357 1999-03-26 Doug Evans <devans@casey.cygnus.com>
359 * fr30-dis.c: Rebuild.
360 * m32r-dis.c: Rebuild.
362 1999-03-23 Ian Lance Taylor <ian@zembu.com>
364 * m68k-opc.c: Change compare instructions to use "@s" rather than
365 ";s" when used with an immediate operand.
367 1999-03-22 Doug Evans <devans@casey.cygnus.com>
369 * cgen-opc.c (cgen_set_cpu): Delete.
370 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
371 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
373 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
375 * po/opcodes.pot: Rebuild.
377 1999-03-16 Martin Hunt <hunt@cygnus.com>
379 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
381 1999-03-11 Doug Evans <devans@casey.cygnus.com>
383 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
384 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
385 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
386 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
387 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
388 * m32r-opinst.c: Rebuild.
390 1999-02-25 Doug Evans <devans@casey.cygnus.com>
392 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
393 (cgen_hw_lookup_by_num): Rewrite.
394 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
395 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
396 * m32r-opinst.c: Rebuild.
398 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
400 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
401 (insert_jhint): Fix insertion mask.
402 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
404 1999-02-10 Doug Evans <devans@casey.cygnus.com>
406 * Makefile.in: Rebuild.
408 1999-02-09 Doug Evans <devans@casey.cygnus.com>
410 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
411 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
412 * Makefile.am: Remove references to them.
413 (HFILES): Add fr30-desc.h,m32r-desc.h.
414 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
416 (ALL_MACHINES): Update.
417 * configure.in: Redo handling of cgen_files.
418 (bfd_i960_arch): Delete i960c-*.lo files.
419 * configure: Regenerate.
420 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
421 (hash_insn_array): Rewrite.
422 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
423 (hash_insn_array): Rewrite.
424 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
425 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
426 (cgen_lookup_get_insn_operands): Ditto.
427 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
428 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
429 * po/POTFILES.in: Rebuild.
430 * po/opcodes.pot: Rebuild.
432 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
434 * Makefile.am: Rebuild dependencies.
435 (HFILES): Add fr30-opc.h.
436 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
437 * Makefile.in: Rebuild.
439 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
440 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
442 * acconfig.h: Remove.
443 * configure: Rebuild with current autoconf/automake.
444 * aclocal.m4: Likewise.
445 * config.in: Likewise.
446 * Makefile.in: Likewise.
448 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
450 * m68k-opc.c: Correct move (not movew) to status word on 5200.
452 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
454 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
455 * i386-dis.c (x_mode): Define.
459 (dis386_twobyte): Remove.
460 (dis386_twobyte_att): New.
461 (dis386_twobyte_intel): New.
462 (print_insn_x86): Use new arrays.
464 (float_mem_intel): New.
465 (float_mem_att): New.
466 (dofloat): Use new float_mem arrays.
467 (print_insn_i386_att): New.
468 (print_insn_i386_intel): New.
469 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
470 (putop): Handle intel syntax.
471 (OP_indirE): Handle intel syntax.
472 (OP_E): Handle intel syntax.
473 (OP_I): Handle intel syntax.
474 (OP_sI): Handle intel syntax.
475 (OP_OFF): Handle intel syntax.
479 1999-01-27 Doug Evans <devans@casey.cygnus.com>
481 * fr30-opc.h,fr30-opc.c: Rebuild.
482 * i960c-opc.h,i960c-opc.c: Rebuild.
483 * m32r-opc.c: Rebuild.
485 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
487 * hppa-dis.c: revert HP merge changes until HP gives us
490 1999-01-19 Nick Clifton <nickc@cygnus.com>
492 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
493 offsets as well as symbloic address.
495 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
497 * hppa-dis.c: fix comments and some indentation.
499 1999-01-12 Doug Evans <devans@casey.cygnus.com>
501 * fr30-opc.c,i960c-opc.c: Regenerate.
503 1999-01-11 Doug Evans <devans@casey.cygnus.com>
505 * fr30-opc.c: Regenerate.
507 1999-01-06 Doug Evans <devans@casey.cygnus.com>
509 * m32r-dis.c: Regenerate.
511 1999-01-05 Doug Evans <devans@casey.cygnus.com>
513 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
514 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
515 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
517 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
519 * configure.in: Require autoconf 2.12.1 or higher.
521 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
523 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
525 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
527 * fr30-opc.c: Regenerated.
529 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
531 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
533 1998-12-15 Dave Brolley <brolley@cygnus.com>
535 * fr30-opc.c,fr30-opc.h: Regenerated.
537 1998-12-14 Dave Brolley <brolley@cygnus.com>
539 * fr30-opc.c,fr30-opc.h: Regenerated.
541 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
543 * fr30-opc.c,fr30-opc.h: Regenerated.
545 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
547 * m32r-opc.c: Regenerate.
549 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
551 * dis-buf.c (generic_strcat_address): reformat to GNU coding
552 conventions. change sprintf call to an sprintf_vma call.
554 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
556 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
558 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
560 The following changes were made by
561 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
562 David Taylor <taylor@texas.cygnus.com>, and
563 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
564 merge in changes by HP; HP did not create ChangeLog entries.
566 * dis-buf.c (generic_strcat_address): new function.
568 * hppa-dis.c: Changes to improve hppa disassembly.
569 Changed formatting in : reg_names, fp_reg_names,control_reg,
570 New variables : sign_extension_names, deposit_names, conversion_names
571 float_test_names, compare_cond_names_double, add_cond_names_double,
572 logical_cond_names_double, unit_cond_names_double,
573 branch_push_pop_names, saturation_names, shift_names, mix_names,
574 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
575 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
576 (fput_const): renamed as fput_hex_const
578 - use the macros fputs_filtered and
579 fput_decimal_const whenever possible; calls to sign_extend require
580 2 params -- add a missing second param of 0.
581 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
582 architecture version number of current machine. HP folks are
583 trying to handle situation where the target program was compiled
584 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
586 - added new cases : 'g', 'B', 'm'
587 - added cases specifically for PA 2.0
588 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
589 - calls to fput_const become calls to fput_hex_const
591 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
593 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
594 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
595 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
596 * Makefile.in: Rebuilt.
597 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
599 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
600 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
602 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
604 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
606 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
608 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
610 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
611 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
613 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
615 * fr30-opc.c: Regenerate.
617 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
619 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
621 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
623 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
625 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
627 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
629 1998-11-30 Doug Evans <devans@casey.cygnus.com>
631 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
632 CGEN_INSN_BASE_VALUE.
633 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
634 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
636 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
638 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
640 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
642 * fr30-asm.c,fr30-dis.c: Regenerated.
644 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
646 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
648 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
650 * fr30-opc.c: Regenerated.
652 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
654 * fr30-opc.c: Regenerated.
655 * fr30-opc.h: Regenerated.
656 * fr30-dis.c: Regenerated.
657 * fr30-asm.c: Regenerated.
659 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
661 * mips-opc.c (sync.p,sync.l): Swap insn values.
663 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
665 * fr30-opc.c: Regenerate.
667 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
669 * fr30-opc.c: Regenerated.
670 * fr30-opc.h: Regenerated.
672 1998-11-18 Doug Evans <devans@casey.cygnus.com>
674 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
675 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
677 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
679 * fr30-opc.c: Regenerated.
681 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
683 * fr30-opc.c: Regenerated.
684 * fr30-opc.h: Regenerated.
685 * fr30-dis.c: Regenerated.
686 * fr30-asm.c: Regenerated.
688 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
690 * po/opcodes.pot: Regenerated.
691 * fr30-opc.c: Regenerated.
692 * fr30-opc.h: Regenerated.
693 * fr30-dis.c: Regenerated.
694 * fr30-asm.c: Regenerated.
696 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
698 * disassemble.c (disassembler): Add support for FR30 target.
700 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
702 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
703 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
705 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
707 * po/opcodes.pot: Regenerate.
708 * po/POTFILES.in: Regenerate.
709 * fr30-opc.c: Regenerate.
710 * fr30-opc.h: Regenerate.
712 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
714 * m32r-asm.c: Regenerate.
716 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
718 * configure.in: Added case for bfd_fr30_arch.
719 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
720 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
721 (CLEANFILES): Added stamp-fr30.
723 * fr30-asm.c: New file.
724 * fr30-dis.c: New file.
725 * fr30-opc.c: New file.
726 * fr30-opc.h: New file.
727 * po/POTFILES.in: Regenerated
728 * po/opcodes.pot: Regenerated
730 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
732 * configure.in: detect cygwin* instead of cygwin32*
733 * configure: regenerate
735 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
737 * mips-opc.c (IS_M): Added.
739 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
741 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
743 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
745 * m32r-opc.h,m32r-opc.c: Regenerate.
747 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
749 * i386-dis.c (OP_3DNowSuffix): New static function.
752 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
753 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
754 (insn_codep): New static variable.
755 (print_insn_x86): Init insn_codep after prefixes.
756 (grps): Add GRP14 entries for prefetch, prefetchw.
759 From Jeff B Epler <jepler@usgs.gov>
760 * i386-dis.c (Suffix3DNow): New table.
762 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
764 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
766 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
768 * d10v-dis.c (print_operand): If num is nonzero, then
769 add OPERAND_ACC1, not OPERAND_ACC0.
771 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
773 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
776 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
778 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
781 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
783 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
785 1998-09-09 Michael Meissner <meissner@cygnus.com>
787 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
790 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
792 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
794 (print_insn_little_arm): Detect Thumb symbols in elf object
797 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
799 * alpha-dis.c (print_insn_alpha): Use the machine type to
800 decide which PALcode set to include.
802 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
804 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
806 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
808 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
809 MSUB and MSUBS instructions.
811 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
813 * ppc-opc.c (powerpc_operands): Omit parens around additions in
816 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
818 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
819 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
820 +, -, and d for ColdFire.
822 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
823 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
824 (extract_mbe): Likewise.
826 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
828 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
830 * m10300-opc.c: First cut at UDF instructions.
832 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
834 * m32r-opc.c: Regenerate (remove semantic descriptions).
836 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
838 * arm-dis.c (print_insn_big_arm): Fix indentation.
839 (print_insn_little_arm): Likewise.
841 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
843 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
845 (print_insn_little_arm): Likewise.
847 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
849 Move all global state data into opcode table struct, and treat
850 opcode table as something that is "opened/closed".
851 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
852 (cgen_asm_init): Delete.
853 (cgen_set_parse_operand_fn): New function.
854 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
855 (cgen_dis_init): Delete.
856 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
857 (cgen_current_{opcode_table_mach,endian}): Delete.
858 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
860 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
862 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
865 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
867 * m10300-opc.c: Add entries for "no_match_operands" field in
870 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
872 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
874 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
876 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
878 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
880 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
882 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
884 (OP_J): Remove unnecessary subtraction when 16-bit displacement
885 will be masked later.
887 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
889 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
891 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
893 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
895 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
897 * m10300-dis.c: Only recognize instructions from the currently
899 * m10300-opc.c: Add field indicating the particular variant of
900 the mn10300 each instruction is available on.
902 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
904 * configure.in: For bfd_vax_arch, build vax-dis.lo.
905 * Makefile.am: Rebuild dependencies.
906 (CFILES): Add vax-dis.c.
907 (ALL_MACHINES): Add vax-dis.lo.
908 * aclocal.m4: Rebuild with current libtool.
909 * configure, Makefile.in: Rebuild.
911 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
913 * vax-dis.c: New file, from work by Pauline Middelink
914 <middelin@polyware.iaf.nl>.
915 * disassemble.c (ARCH_vax): Define if ARCH_all.
916 (disassembler): Add case for ARCH_vax.
917 * makefile.vms: Support compilation on vms/vax.
919 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
921 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
922 related to sign extension and the size of ints.
924 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
926 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
927 instructions. Support (sp) addressing mode by expanding it into
930 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
932 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
934 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
936 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
938 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
940 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
943 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
945 * mips-dis.c (print_insn_little_mips): Previously, instruction
946 printing references the symbol table to determine whether the
947 instruction resides in a block regular instructions or mips16
948 instructions. However, when the disassembler gets used in other
949 environments where the symbol table is not present, we no longer
950 rely in the symbol table, rather, use the low bit of the
951 instructions address to guess. There should be no change for usage
952 of the disassembler in host based programs, gdb, objdump.
953 (print_insn_big_mips): ditto.
954 (print_insn_mips): ditto
956 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
958 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
960 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
962 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
964 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
966 * i386-dis.c (index16): Add '%' to register names. Use ','
969 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
971 * i386-dis.c: Don't print opcode suffix when we can figure out the
972 size (and gas can!) by register operands, or from the default
974 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
976 (dis386, dis386_twobyte, grps): Use new suffix macros.
977 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
978 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
979 order of cmps operands to agree with Intel docs. Correct operand
980 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
981 agree with Intel docs.
982 (print_insn_x86): Print orphan fwait before other prefixes.
983 Return correct byte count for orphan fwait with prefixes. Don't
984 print `bound' operands in reverse order.
985 (ckprefix): Stop accumulating prefixes if we get fwait.
986 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
988 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
990 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
991 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
993 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
995 Fix problems when bfd_vma is wider than long.
996 * i386-dis.c: Make op_address and start_pc unsigned.
997 (set_op): Make parameter unsigned.
998 (print_insn_x86): Cast to bfd_vma when passing a value to
1000 * ns32k-dis.c (CORE_ADDR): Don't define.
1001 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1002 bfd_scan_vma to read back address.
1003 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1005 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1006 (NEXTULONG): New definition.
1007 (print_insn_m68k): Avoid overflow when computing third argument of
1009 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1010 Use disp instead of val to store offset values.
1011 (print_indexed): Use base_disp instead of word to store base
1012 displacement, to avoid overflow.
1013 * m10300-dis.c (disassemble): Cast value to long when computing
1014 pc-relative address, to get correct sign extension.
1016 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1018 * m32r-opc.c: Regenerate.
1020 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1022 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1023 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1025 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1027 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1029 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1031 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1033 (OP_DSreg): Rename from OP_DSSI.
1034 (OP_ESreg): Rename from OP_ESDI.
1035 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1037 (append_seg): Rename from append_prefix.
1038 (ptr_reg): New function.
1039 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1041 (PREFIX_ADDR): Rename from PREFIX_ADR.
1042 (float_reg): Add non-broken opcodes for people who don't want
1045 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1047 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1050 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1052 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1054 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1056 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1057 0; produce error message for shifts of size 32 (or 64 for 64-bit
1058 shifts), because the hardware doesn't support them.
1060 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1062 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1063 LONG_2, LONG_2b formats to use this new operand.
1065 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1067 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1069 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1071 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1072 endian data support.
1074 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1076 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1077 and SHORT_B3b formats to use Rb instead of Ra.
1079 Add FLAG_MUL16 to MUL2XH opcode.
1081 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1082 to existing 1.1.1 parallelisation prohibition procedure.
1084 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1086 * m32r-asm.c,m32r-dis.c: Regenerate.
1088 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1090 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1091 with a shift count of 0.
1093 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1095 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1096 (cgen_hw_lookup_by_num): New function.
1098 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1100 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1102 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1104 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1105 as big-endian on SPARClite.
1107 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1109 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1111 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1113 * po/Make-in (install-info): New target.
1115 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1117 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1118 * configure: Rebuild.
1120 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1122 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1123 variety of ISA2 instructions to set bottom ten bits of trap code.
1125 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1127 * Makefile.am (config.status): Add explicit target so that
1128 config.status depends upon bfd/configure.in.
1129 * Makefile.in: Rebuild.
1131 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1133 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1134 instructions to set bottom ten bits of break code.
1135 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1136 for above optional argument.
1138 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1140 * makefile.vms: Run dec c with /nodebug.
1142 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1144 * Makefile.in: Rebuilt.
1145 * Makefile.am: Regenerated dependencies with mkdep.
1147 * opintl.h (_): Define as dgettext.
1149 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1151 * cgen-asm.c: Internationalised.
1152 * m32r-asm.c: Internationalised.
1153 * m32r-dis.c: Internationalised.
1154 * m32r-opc.c: Internationalised.
1156 * aclocal.m4: Regenerated.
1157 * configure: Regenerated.
1158 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1159 * Makefile.in: Rebuild.
1160 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1161 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1163 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1165 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1167 * aclocal.m4, configure: Rebuild with current tools.
1169 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1171 * opintl.h: New file - contains internationalisation macros used
1172 by source files in this directory.
1173 * po/: New subdirectory - contains internationalisation files.
1174 * po/Make-in: New file - Makefile constructor.
1175 * po/POTFILES.in: New file - list of files in opcodes directory
1176 that should be scan for internationalisation macros.
1177 * po/opcodes.pot: New file - list of internationisation strings
1178 found in files mentioned in po/POTFILES.in.
1179 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1180 entry. Add intl directory to include paths.
1181 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1182 HAVE_STRCPY, HAVE_LC_MESSAGES
1183 * configure.in: Add rule to build Makefile in po subdirectory.
1184 * Makefile.in: Rebuilt.
1185 * aclocal.m4: Rebuilt.
1186 * config.in: Rebuilt.
1187 * configure: Rebuilt.
1188 * alpha-opc.c: Internationalised.
1189 * arc-dis.c: Internationalised.
1190 * arc-opc.c: Internationalised.
1191 * arm-dis.c: Internationalised.
1192 * cgen-asm.c: Internationalised.
1193 * d30v-dis.c: Internationalised.
1194 * dis-buf.c: Internationalised.
1195 * h8300-dis.c: Internationalised.
1196 * h8500-dis.c: Internationalised.
1197 * i386-dis.c: Internationalised.
1198 * m10200-dis.c: Internationalised.
1199 * m10300-dis.c: Internationalised.
1200 * m68k-dis.c: Internationalised.
1201 * m88k-dis.c: Internationalised.
1202 * mips-dis.c: Internationalised.
1203 * ns32k-dis.c: Internationalised.
1204 * opintl.h: Internationalised.
1205 * ppc-opc.c: Internationalised.
1206 * sparc-dis.c: Internationalised.
1207 * v850-dis.c: Internationalised.
1208 * v850-opc.c: Internationalised.
1210 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1212 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1213 (asm_hash_table_entries): New variable.
1214 (cgen_asm_init): Free asm_hash_table_entries.
1215 (hash_insn_array,hash_insn_list): New functions.
1216 (build_asm_hash_table): Use them. Hash macro insns as well.
1217 (cgen_asm_lookup_insn): Update.
1218 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1219 (dis_hash_table_entries): New variable.
1220 (cgen_dis_init): Free dis_hash_table_entries.
1221 (hash_insn_array,hash_insn_list): New functions.
1222 (build_dis_hash_table): Use them. Hash macro insns as well.
1223 (cgen_dis_lookup_insn): Update.
1224 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1225 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1226 (cgen_macro_insn_count): New function.
1227 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1229 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1231 * i386-dis.c (OP_DSSI): Print segment override.
1233 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1235 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1238 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1240 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1241 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1242 * configure.in: Define and substitute WIN32LDFLAGS and
1244 * aclocal.m4: Rebuild with new libtool.
1245 * configure, Makefile.in: Rebuild.
1247 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1249 * m32r-opc.c: Regenerate.
1251 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1253 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1254 before trying to copy it.
1255 * Makefile.in: Rebuild.
1257 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1259 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1261 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1263 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1264 from an arbitrary valid buffer instead of fetching them on demand
1266 (invalid_float): use bit_extract_simple() instead of bit_extract().
1268 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1270 From H.J. Lu <hjl@gnu.org>:
1271 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1274 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1276 * Branched binutils 2.9.
1278 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1280 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1281 disassembling last 4 bytes of a section.
1283 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1285 Fix some gcc -Wall warnings:
1286 * arc-dis.c (print_insn): Add casts to avoid warnings.
1287 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1288 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1289 * m10200-dis.c (disassemble): Likewise.
1290 * m10300-dis.c (disassemble): Likewise.
1291 * ns32k-dis.c (print_insn_ns32k): Likewise.
1292 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1293 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1294 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1295 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1296 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1297 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1298 * tic80-dis.c (print_one_instruction): Likewise.
1299 * w65-dis.c (print_operand): Likewise.
1300 * z8k-dis.c (fetch_data): Likewise.
1301 * a29k-dis.c: Add return type for find_byte_func_type.
1302 * arc-opc.c: Include <stdio.h>. Remove declarations of
1303 insert_multshift and extract_multshift.
1304 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1306 (extract_value): Fully parenthesize expression.
1307 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1308 * h8500-opc.h (h8500_table): Fully bracket initializer.
1309 * w65-opc.h (optable): Likewise.
1310 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1311 * i386-dis.c (OP_E): Initialize local variables.
1312 * m10200-dis.c (print_insn_mn10200): Likewise.
1313 * mips-dis.c (print_insn_mips16): Likewise.
1314 * sh-dis.c (print_insn_shx): Likewise.
1315 * v850-dis.c (print_insn_v850): Likewise.
1316 * ns32k-dis.c (print_insn_arg): Declare.
1317 (get_displacement, invalid_float): Declare.
1318 (list_search, sign_extend, flip_bytes): Declare return type.
1319 (get_displacement): Likewise.
1320 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1322 (print_insn_ns32k): Make i unsigned.
1323 (invalid_float): Make static. Declare type of val.
1324 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1325 on each for iteration.
1326 * tic30-dis.c (get_indirect_operand): Likewise.
1327 * z8k-dis.c (print_insn_z8001): Declare return type.
1328 (print_insn_z8002): Likewise.
1329 (unparse_instr): Fix sprintf format strings.
1331 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1333 * mips-opc.c: Add "sync.l" and "sync.p".
1335 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1337 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1338 default m68k variant to recognize.
1340 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1341 (ctrl, cobr, mem, ea): Likewise.
1342 (print_addr): Likewise. Remove cast.
1343 (ea): Cast argument of print_addr to bfd_vma.
1345 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1347 (cgen_parse_unsigned_integer): Likewise.
1348 (cgen_parse_address): Likewise.
1350 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1352 * i960-dis.c (ctrl): Add full braces to structure initialization.
1353 (cobr, mem, reg): Likewise.
1354 (ea): Correct parenthesization in expression.
1356 * cgen-asm.c: Include <ctype.h>.
1357 (build_asm_hash_table): Remove unused local variable i.
1358 (cgen_parse_keyword): Add casts to avoid warnings.
1360 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1361 symbol. Fix indentation.
1362 (print_insn_little_arm): Likewise.
1364 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1366 * configure.in: Use AM_DISABLE_SHARED.
1367 * aclocal.m4, configure: Rebuild with libtool 1.2.
1369 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1371 These patches are courtesy of Jonathan Walton and Tony Thompson
1372 (athompso@cambridge.arm.com).
1374 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1377 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1378 both the offset and the label closest to the destination.
1380 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1382 * m32r-opc.h: Regenerate.
1384 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1386 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1388 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1390 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1391 assume that info->symbols is non-empty.
1393 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1395 * alpha-opc.c (cvtqs) There is no such thing.
1396 (cvttq): Missing most of the /*d variants.
1398 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1400 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1401 delayed branches or jumps.
1403 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1405 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1407 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1408 * tic30-dis.c (print_branch): Likewise.
1410 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1412 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1413 saved_symbol code as it is no longer needed.
1415 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1417 * cgen-asm.c: Include symcat.h.
1418 * cgen-dis.c,cgen-opc.c: Ditto.
1419 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1421 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1423 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1425 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1427 * m32r-opc.[ch]: Regenerate.
1429 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1431 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1432 arguments. Don't perform validation here.
1433 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1435 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1437 * m32r-opc.c: Regenerate.
1439 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1441 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1442 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1444 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1446 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1448 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1450 * configure.in: Get the version number from BFD.
1451 * configure: Rebuild.
1453 From H.J. Lu <hjl@gnu.org>:
1454 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1455 * Makefile.in: Rebuild.
1457 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1459 * m32r-opc.c: Regenerate.
1460 * m32r-opc.h: Regenerate.
1462 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1464 * m32r-opc.c: Regenerate.
1466 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1468 Fix rac to accept only a0:
1469 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1470 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1471 Introduce OPERAND_GPR.
1472 * d10v-dis.c (print_operand): Likewise.
1474 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1476 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1477 (cgen_hw_lookup): Make result const.
1478 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1480 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1482 * configure, aclocal.m4: Rebuild with new libtool.
1484 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1486 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1487 instructions use a PC relative branch, not absolute.
1489 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1491 * configure.in: Set libtool_enable_shared rather than
1492 libtool_shared. Remove diversion hack.
1493 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1495 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1497 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1498 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1500 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1502 * tic30-dis.c: New file.
1503 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1504 * configure.in: Handle bfd_tic30_arch.
1505 * Makefile.am: Rebuild dependencies.
1506 (CFILES): Add tic30-dis.c
1507 (ALL_MACHINES): Add tic30-dis.lo.
1508 * configure, Makefile.in: Rebuild.
1510 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1512 * m32r-opc.h (HAVE_CPU_M32R): Define.
1514 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1516 * v850-opc.c (insertion routines): If both alignment and size is
1517 wrong then report this.
1519 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1521 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1522 Only recognize instructions for the current target_processor.
1524 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1526 * d10v-dis.c (PC_MASK): Correct value.
1527 (print_operand): If there's a reloc, don't calculate the
1528 address because they could be in different sections.
1530 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1532 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1533 instruction after the 4650's "mul" instruction; nobody's using the
1534 4010 these days. If object files someday indicate which processor
1535 variant they're intended for, we can do a better job at this.
1537 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1539 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1540 table provided entry size. Use CGEN_INSN_MNEMONIC.
1541 (cgen_parse_keyword): Rewrite.
1542 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1543 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1544 * cgen-opc.c: Clean up pass over `struct foo' usage.
1545 (cgen_keyword_lookup_value): Handle "" entry.
1546 (cgen_keyword_add): Likewise.
1548 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1550 * mips-opc.c: Add FP_D to s.d instruction flags.
1552 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1554 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1556 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1558 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1559 PC relative offset forms before the 15 bit forms. An assembler command
1560 line option now chooses the default.
1562 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1564 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1565 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1567 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1569 * configure: Only build libopcodes shared if --enable-shared's value
1570 was `yes', or was set to `*opcodes*'.
1571 * aclocal.m4: Likewise.
1572 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1573 original source of this bit of code. It's not clear what the best fix
1576 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1578 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1579 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1580 offset forms before the 15 bit forms, to default to the long forms.
1582 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1584 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1586 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1588 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1589 symbol if none is present.
1590 (print_insn_big_arm): Prevent examination of stored symbol if
1593 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1595 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1597 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1599 * disassemble.c: Remove disasm_symaddr() function.
1601 * arm-dis.c: Use info->symbol instead of info->flags to determine
1602 if disassmbly should be in Thumb or Arm mode.
1604 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1606 * arm-dis.c: Add support for disassembling Thumb opcodes.
1607 (print_insn_thumb): New function.
1609 * disassemble.c (disasm_symaddr): New function.
1611 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1612 (thumb_opcodes): Table of Thumb opcodes.
1614 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1616 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1618 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1619 and 'v' as operand types.
1621 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1623 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1624 <olivier.carmona@di.epfl.ch>.
1625 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1626 which has a two word opcode with a one word argument.
1628 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1630 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1631 unsigned, not signed.
1632 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1634 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1636 * d10v-dis.c (print_operand):
1637 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1639 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1641 * d10v-opc.c (OPERAND_FLAG): Split into:
1642 (OPERAND_FFLAG, OPERAND_CFLAG) .
1646 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1648 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1649 field for all INSN_MACRO's.
1650 * mips16-opc.c: same
1652 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1654 * mips-opc.c (sync,cache): These are 3900 insns.
1656 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1658 sh-opc.h (sh_table): Remove ftst/nan.
1660 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1662 * mips-opc.c (ffc, ffs): Fix mask.
1664 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1666 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1669 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1671 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1672 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1674 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1676 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1677 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1679 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1681 * v850-dis.c (disassemble): Replace // with /* ... */
1683 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1685 * sparc-opc.c: Add wr & rd for v9a asr's.
1686 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1687 (v9a_asr_reg_names): New variable.
1688 Patch from David Miller <davem@vger.rutgers.edu>.
1690 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1692 * sparc-opc.c (v9notv9a): New insn type.
1693 (IMPDEP): Move to the end to not conflict with edge8 et al.
1694 Patch from David Miller <davem@vger.rutgers.edu>.
1696 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1698 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1700 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1702 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1704 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1706 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1707 of disassemble_info structure to determine if an overlay address
1708 has a matching symbol in low memory.
1710 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1711 new symbol_at_address_func field in disassemble_info structure.
1713 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1715 * v850-opc.c (extract_d22): Use signed arithmatic.
1717 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1719 * mips-opc.c: Three op mult is not an ISA insn.
1721 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1723 * mips-opc.c: Fix formatting.
1725 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1727 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1728 than assuming that char is signed. Explicitly sign extend 16 bit
1729 values, rather than assuming that short is 16 bits.
1730 (OP_sI, OP_J, OP_DIR): Likewise.
1732 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1734 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1737 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1739 * v850-opc.c: Fix typo in comment.
1741 * v850-dis.c (disassemble): Add test of processor type when
1742 determining opcodes.
1744 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * configure.in: Use a diversion to set enable_shared before the
1747 arguments are parsed.
1748 * configure: Rebuild.
1750 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1752 * m68k-opc.c (TBL1): Use ! rather than `.
1753 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1755 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1757 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1759 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1761 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1764 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1765 * aclocal.m4: Rebuild with new libtool.
1766 * configure: Rebuild.
1768 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1770 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1772 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1774 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1776 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1778 * v850-opc.c (v850_opcodes): Further rearrangements.
1780 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1782 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1784 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1786 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1789 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1791 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1793 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1795 * v850-opc.c: Initialise processors field of v850_opcode structure.
1797 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1799 Merge changes from Martin Hunt:
1801 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1803 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1804 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1805 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1807 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1809 * d30v-dis.c (print_insn): First operand of d*i (delayed
1810 branch) instructions is relative.
1812 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1813 (d30v_operand_table): Add IMM6S3 type.
1814 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1816 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1817 and cmp instructions.
1819 * d30v-opc.c: Correct entries for repeat*, and sat*.
1820 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1821 types. Correct several formats.
1823 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1825 * d30v-opc.c (pre_defined_registers): Change control registers.
1827 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1828 SHORT_C2. Manual was incorrect.
1830 * d30v-dis.c (lookup_opcode): Return value now indicates
1831 if an opcode has a short and a long form. Used for deciding
1832 to append a ".s" or ".l".
1833 (print_insn): Append a ".s" to an instruction if it is
1834 the short form and ".l" if it is a long form. Do not append
1835 anything if the instruction has only one possible size.
1837 * d30v-opc.c: Change mulx2h to require an even register.
1838 New form: SHORT_A2; a SHORT_A form that needs an even
1839 register as the first operand.
1841 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1842 instruction was not being disassembled if there were an odd
1843 number of instructions.
1845 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1847 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1849 * v850-dis.c (disassemble): Improved display of register lists.
1851 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1853 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1854 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1855 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1856 fandnot1s, fandnot2s.
1858 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1862 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1864 * cgen-asm.c (cgen_parse_address): New argument resultp.
1865 All callers updated.
1866 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1868 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1870 * mn10200-dis.c (disassemble): PC relative instructions are
1871 relative to the next instruction, not the current instruction.
1873 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1875 * v850-dis.c (disassemble): Only signed extend values that are not
1876 returned by extract functions.
1877 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1879 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1881 * v850-opc.c: Update comments. Remove use of
1882 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1884 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1886 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1888 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1890 * configure: Rebuilt with latest devo autoconf for NT support.
1892 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1894 * v850-dis.c (disassemble): Use curly brace syntax for register
1897 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1898 where r0 is being used as a destination register.
1900 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1902 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1904 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1906 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1908 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1910 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1911 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1914 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1916 * configure (cgen_files): Add support for v850e target.
1917 * configure.in (cgen_files): Add support for v850e target.
1919 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1921 * configure (cgen_files): Add support for v850ea target.
1922 * configure.in (cgen_files): Add support for v850ea target.
1924 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1926 * configure.in (bfd_arc_arch): Add.
1927 * configure: Rebuild.
1928 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1929 * Makefile.in: Rebuild.
1930 * arc-dis.c, arc-opc.c: New files.
1931 * disassemble.c (ARCH_all): Define ARCH_arc.
1932 (disassembler): Add ARC support.
1934 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1936 * v850-dis.c (disassemble): Add support for v850EA instructions.
1938 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1939 (v850_opcodes): Add v850EA instructions.
1941 * v850-dis.c (disassemble): Add support for v850E instructions.
1943 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1944 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1945 insert_spe, extract_spe): New Functions.
1946 (v850_opcodes): Add v850E instructions.
1948 * v850-opc.c: Reorganised and re-layed out to improve readability
1951 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1953 * configure: Rebuild with autoconf 2.12.1.
1955 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1957 * aclocal.m4, configure: Rebuild with new automake patches.
1959 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1961 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1962 * acinclude.m4: Just include acinclude.m4 from BFD.
1963 * aclocal.m4, configure: Rebuild.
1965 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1967 * Makefile.am: New file, based on old Makefile.in.
1968 * acconfig.h: New file.
1969 * acinclude.m4: New file.
1970 * stamp-h.in: New file.
1971 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1972 Removed shared library handling; now handled by libtool. Replace
1973 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1974 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1975 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1976 handling in AC_OUTPUT.
1977 * dep-in.sed: Change .o to .lo.
1978 * Makefile.in: Now built with automake.
1979 * aclocal.m4: Now built with aclocal.
1980 * config.in, configure: Rebuild.
1982 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1984 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1986 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1988 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1990 * sparc-dis.c (sorted_opcodes): New static local.
1991 (struct opcode_hash): `opcode' is pointer to const element.
1992 (build_hash): First arg is now table of sorted pointers.
1993 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1994 (compare_opcodes): Update.
1996 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1998 * cgen-opc.c: #include <ctype.h>.
1999 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2000 Handle case insensitive hashing.
2001 (hash_keyword_value): Change type of `value' to unsigned int.
2003 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2005 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2006 precision FP, mark it as such. Likewise for double precision
2007 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2010 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2012 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2014 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2015 nesting depth when all the macros are expanded.
2017 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2019 * sparc-opc.c: The fcmp v9a instructions take an integer register
2020 as a destination, not a floating point register. From Christian
2021 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2023 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2025 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2026 syntax. From Roman Hodek
2027 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2029 * i386-dis.c (twobyte_has_modrm): Fix pand.
2031 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2033 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2035 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2037 * arm-dis.c: Add prototypes for arm_decode_shift and
2040 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2042 * mips-opc.c: Add r3900 insns.
2044 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2046 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2047 print delay slot instructions on the same line. When using a PC
2048 relative load, add a comment with the value being loaded if it can
2051 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2053 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2054 to pushS/popS for segment regs and byte constant so that
2055 pushw/popw printed when in 16 bit data mode.
2057 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2058 print cbtw, cwtd in 16 bit data mode.
2059 * i386-dis.c (putop): extra case W to support above.
2061 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2062 address size prefix in 16 bit address mode.
2064 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2066 * sh-dis.c: Reindent. Rename local variable fprintf to
2069 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2071 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2073 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2075 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2077 * mips16-opc.c (mip16_opcodes): same.
2079 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2081 * m68k-opc.c (moveb): Change $d to %d.
2083 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2085 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2086 (twobyte_has_modrm): Likewise.
2088 (OP_MMX, OP_EM, OP_MS): New static functions.
2090 * i386-dis.c: Revert patch of April 4. The output now matches
2093 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2095 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2098 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2100 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2102 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2104 * Makefile.in (install): Depend upon installdirs.
2105 (installdirs): New target.
2107 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2109 From Thomas Graichen <graichen@rzpd.de>:
2110 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2111 * configure: Rebuild.
2113 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2115 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2116 Delete string{,s}.h support.
2118 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2120 * cgen-asm.c (cgen_parse_operand_fn): New global.
2121 (cgen_parse_{{,un}signed_integer,address}): Update call to
2122 cgen_parse_operand_fn.
2123 (cgen_init_parse_operand): New function.
2124 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2125 from cgen_asm_init_parse.
2126 (m32r_cgen_assemble_insn): New operand `errmsg'.
2127 Delete call to as_bad, return error message to caller.
2128 (m32r_cgen_asm_hash_keywords): #if 0 out.
2130 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2132 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2134 [case 'J']: Fix typo in register name.
2136 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2138 * configure.in: Substitute SHLIB_LIBS.
2139 * configure: Rebuild.
2140 * Makefile.in (SHLIB_LIBS): New variable.
2141 ($(SHLIB)): Use $(SHLIB_LIBS).
2143 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2145 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2147 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2149 * disassemble.c (disassembler): Handle m32r.
2151 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2153 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2154 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2155 * Makefile.in (CFILES): Add them.
2156 (ALL_MACHINES): Add them.
2157 (dependencies): Regenerate.
2158 * configure.in (cgen_files): New variable.
2159 (bfd_m32r_arch): Add entry.
2160 * configure: Regenerate.
2162 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2164 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2165 * configure: Rebuild.
2167 * Makefile.in: Rebuild dependencies.
2169 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2171 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2174 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2176 * Branched binutils 2.8.
2178 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2180 * m10200-dis.c: Rename from mn10200-dis.c.
2181 * m10200-opc.c: Rename from mn10200-opc.c.
2182 * m10300-dis.c: Rename from mn10300-dis.c
2183 * m10300-opc.c: Rename from mn10300-opc.c.
2184 * Makefile.in: Update accordingly.
2186 * mips16-opc.c: Add mul and dmul macros.
2188 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2190 * makefile.vms: Update CFLAGS, add clean target.
2192 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2194 * mips-opc.c: Add "wait". From Ralf Baechle
2195 <ralf@gnu.ai.mit.edu>.
2197 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2198 * configure, config.in: Rebuild.
2199 * sysdep.h: Include <stdlib.h> if it exists.
2200 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2202 * Makefile.in: Rebuild dependencies.
2204 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2206 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2207 Andrew Bray <andy@madhouse.demon.co.uk>.
2209 * mips-opc.c: Add cast when setting mips_opcodes.
2211 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2213 * v850-dis.c (disassemble): Fix sign extension problem.
2214 * v850-opc.c (extract_d*): Fix sign extension problems to make
2215 disassembly calculate branch offsets correctly.
2217 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2221 * mips-opc.c: Add dctr and dctw.
2223 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2225 * d30v-dis.c (print_insn): Change the way signed constants
2228 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2230 * Makefile.in (BFD_H): New variable.
2231 (HFILES): New variable.
2232 (CFILES): Add all C files.
2233 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2234 Delete old dependencies, and build new ones.
2235 * dep-in.sed: New file.
2237 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2239 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2241 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2243 * mn10200-opc.c: Change "trap" to "syscall".
2244 * mn10300-opc.c: Add new "syscall" instruction.
2246 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2248 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2249 mulul insns on the coldfire.
2251 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2253 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2254 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2255 (print_insn_little_arm): Likewise.
2257 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2259 Based on patches from H.J. Lu <hjl@lucon.org>:
2260 * i386-dis.c (fetch_data): Add prototype.
2261 * m68k-dis.c (fetch_data): Add prototype.
2262 (dummy_print_address): Add prototype. Make static.
2263 * ppc-opc.c (valid_bo): Add prototype.
2264 * sparc-dis.c (build_hash_table): Add prototype.
2265 (is_delayed_branch, compute_arch_mask): Add prototypes.
2266 (print_insn_sparc): Make several local variables const.
2267 (compare_opcodes): Change arguments to const PTR. Add prototype.
2268 * sparc-opc.c (arg): Change name field to be const.
2269 (lookup_name, lookup_value): Add prototypes. Change table and
2270 name parameters to be const.
2271 (sparc_encode_asi): Change name parameter to be const.
2272 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2273 (sparc_encode_sparclet_cpreg): Likewise.
2274 (sparc_decode_asi): Change return type to be const.
2275 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2276 (sparc_decode_sparclet_cpreg): Likewise.
2278 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2280 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2281 Solaris doesn't like the combined options, and the -f is
2283 (stamp-tshlink, install): Likewise.
2285 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2287 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2290 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2292 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2294 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2296 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2299 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2301 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2303 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2305 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2307 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2309 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2311 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2313 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2314 floatformat_to_double to make portable.
2315 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2318 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2320 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2321 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2323 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2325 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2326 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2328 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2330 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2331 (OFF_SL_BR_SCALED): ... to this, and added the flag
2332 TIC80_OPERAND_BASEREL to the flags word.
2333 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2336 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2338 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2339 Change mips_opcodes from const array to a pointer,
2340 and change bfd_mips_num_opcodes from const int to int,
2341 so that we can increase the size of the mips opcodes table
2344 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2346 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2347 store BITNUM values in the table in one's complement form
2348 to match behavior when assembler is given a raw numeric
2349 value for a BITNUM operand.
2350 * tic80-dis.c (print_operand_bitnum): Ditto.
2352 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2354 * d30v-opc.c: Removed references to FLAG_X.
2356 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2360 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2362 * Makefile.in: Added d30v object files.
2363 * configure: (bfd_d30v_arch) Rebuilt.
2364 * configure.in: (bfd_d30v_arch) Added new case.
2365 * d30v-dis.c: New file.
2366 * d30v-opc.c: New file.
2367 * disassemble.c (disassembler) Add entry for d30v.
2369 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2371 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2372 representations for the floating point BITNUM values.
2374 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2376 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2377 in the table in one's complement form, as they appear in the
2379 (tic80_symbol_to_value): Use macros to access predefined
2381 (tic80_value_to_symbol): Ditto.
2382 (tic80_next_predefined_symbol): New function.
2383 * tic80-dis.c (print_operand_bitnum): Remove code that did
2384 one's complement for BITNUM values.
2386 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2388 * makefile.vms: Remove 8 bit characters. Update to latest
2391 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2393 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2395 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2397 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2398 (IMM24_PCREL): Likewise.
2400 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2402 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2403 address for an extended PC relative instruction that is not a
2406 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2408 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2411 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2413 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2414 (tic80_opcodes): Sort entries so that long immediate forms
2415 come after short immediate forms, making it easier for
2416 assembler to select the right one for a given operand.
2418 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2420 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2422 (print_insn_mips16): Likewise.
2424 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2426 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2427 a symbol class that restricts translation to just that
2428 class (general register, condition code, etc).
2430 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2432 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2433 and REG_DEST_E for register operands that have to be
2434 an even numbered register. Add REG_FPA for operands that
2435 are one of the floating point accumulator registers.
2436 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2437 (tic80_opcodes): Change entries that need even numbered
2438 register operands to use the new operand table entries.
2439 Add "or" entries that are identical to "or.tt" entries.
2441 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2443 * mips16-opc.c: Add new cases of exit instruction for
2445 * mips-dis.c (print_mips16_insn_arg): Display floating point
2446 registers in operands of exit instruction. Print `$' before
2447 register names in operands of entry and exit instructions.
2449 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2452 pairs for all predefined symbols recognized by the assembler.
2453 Also used by the disassembling routines.
2454 (tic80_symbol_to_value): New function.
2455 (tic80_value_to_symbol): New function.
2456 * tic80-dis.c (print_operand_control_register,
2457 print_operand_condition_code, print_operand_bitnum):
2458 Remove private tables and use tic80_value_to_symbol function.
2460 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2462 * d10v-dis.c (print_operand): Change address printing
2463 to correctly handle PC wrapping. Fixes PR11490.
2465 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2467 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2470 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2472 * mips-dis.c (print_insn_mips16): Set insn_info information.
2473 (print_mips16_insn_arg): Likewise.
2475 * mips-dis.c (print_insn_mips16): Better handling of an extend
2476 opcode followed by an instruction which can not be extended.
2478 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2480 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2481 coldfire moveb instruction to not allow an address register as
2482 destination. Although the documentation does not indicate that
2483 this is invalid, experiments uncovered unexpected behavior.
2484 Added a comment explaining the situation. Thanks to Andreas
2485 Schwab for pointing this out to me.
2487 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2489 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2490 entries are presorted so that entries with the same mnemonic are
2491 adjacent to each other in the table. Sort the entries for each
2492 instruction so that this is true.
2494 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2496 * m68k-dis.c: Include <libiberty.h>.
2497 (print_insn_m68k): Sort the opcode table on the most significant
2498 nibble of the opcode.
2500 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2502 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2503 "vsub", "vst", "xnor", and "xor" instructions.
2504 (V_a1): Renamed from V_a, msb of accumulator reg number.
2505 (V_a0): Add macro, lsb of accumulator reg number.
2507 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2509 * tic80-dis.c (print_insn_tic80): Broke excessively long
2510 function up into several smaller ones and arranged for
2511 the instruction printing function to be callable recursively
2512 to print vector instructions that have both a load and a
2513 math instruction packed into a single opcode.
2514 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2515 to explain why it comes after the other vector opcodes.
2517 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2519 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2520 move insns to handle immediate operands.
2522 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2524 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2525 fix operand mask in the "moveml" entries for the coldfire.
2527 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2529 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2530 New macros for building vector instruction opcodes.
2531 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2532 FMT_LI, which were unused. The field is now a flags field.
2533 Remove some opcodes that are possible, but illegal, such
2534 as long immediate instructions with doubles for immediate
2535 values. Add "vadd" and "vld" instructions.
2537 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2540 the order more logical. Move the shift alias instructions ("rotl",
2541 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2542 interspersed with the regular sr.x and sl.x instructions. Add
2543 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2544 "sub", "subu", "swcr", and "trap".
2546 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2548 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2549 (OFF_SL_PC): Renamed from OFF_SL.
2550 (OFF_SS_BR): New operand type for base relative operand.
2551 (OFF_SL_BR): New operand type for base relative operand.
2552 (REG_BASE): New operand type for base register operand.
2553 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2554 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2555 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2557 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2558 10 char field, padded with spaces on rhs, rather than a string
2559 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2560 than old TIC80_OPERAND_RELATIVE. Add support for new
2561 TIC80_OPERAND_BASEREL flag bit.
2563 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2565 * tic80-dis.c (print_insn_tic80): Print floating point operands
2567 * tic80-opc.c (SPFI): Add single precision floating point
2568 immediate operand type.
2569 (ROTATE): Add rotate operand type for shifts.
2570 (ENDMASK): Add for shifts.
2571 (n): Macro for the 'n' bit.
2572 (i): Macro for the 'i' bit.
2573 (PD): Macro for the 'PD' field.
2574 (P2): Macro for the 'P2' field.
2575 (P1): Macro for the 'P1' field.
2576 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2579 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2581 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2582 adding in current address for pc-relative operands.
2584 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2586 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2587 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2588 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2589 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2590 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2591 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2592 (REG_SCALED, LSI_SCALED): New operand types.
2593 (E): New macro for 'E' bit at bit 27.
2594 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2595 opcodes, including the various size flavors (b,h,w,d) for
2596 the direct load and store instructions.
2598 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2600 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2602 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2603 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2604 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2605 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2606 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2607 masks with "MASK_* & ~M_*" to get the M bit reset.
2608 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2610 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2612 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2613 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2614 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2616 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2617 CC, SICR, and LICR table entries.
2618 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2619 "bcnd", and "brcr" opcodes.
2621 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2623 * ppc-opc.c (powerpc_operands): Make comment match the
2624 actual fields (no shift field).
2625 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2626 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2627 partial implementation, work in progress.
2628 * tic80-opc.c (tic80_operands): Begin construction operands table.
2629 (tic80_opcodes): Continue populating opcodes table and start
2630 filling in the operand indices.
2631 (tic80_num_opcodes): Add this.
2633 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2635 * m68k-opc.c: Add #B case for moveq.
2637 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2639 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2640 before they are used.
2642 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2644 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2645 for "breakpoint" instruction.
2647 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2649 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2650 (dep): Use ALL_CFLAGS rather than CFLAGS.
2652 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2654 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2657 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2659 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2660 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2662 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2664 * mips16-opc.c: Add "abs".
2666 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2668 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2669 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2670 (disassembler): Add bfd_arch_tic80 support to set disassemble
2671 to print_insn_tic80.
2672 * tic80-dis.c (print_insn_tic80): Add stub.
2674 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2676 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2677 * configure: Regenerate with autoconf.
2678 * tic80-dis.c: Add file.
2679 * tic80-opc.c: Add file.
2681 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2683 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2685 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2687 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2688 (mn10200_opcodes): Use it for some logicals and btst insns.
2689 Add "break" and "trap" instructions.
2691 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2693 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2695 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2697 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2698 relative load or add now depends upon whether the instruction is
2701 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2703 * mn10200-dis.c: Finish writing disassembler.
2704 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2705 Fix mask for "jmp (an)".
2707 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2708 handle endianness issues for mn10300.
2710 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2712 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2714 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2715 instruction. Fix opcode field for "movb (imm24),dn".
2717 * mn10200-opc.c (mn10200_operands): Fix insertion position
2720 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2722 * mn10200-opc.c: Create mn10200 opcode table.
2723 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2724 but moving along nicely.
2726 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2728 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2730 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2732 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2733 specifiers for fmovem* instructions.
2735 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2737 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2739 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2741 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2744 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2746 * mn10300-opc.c: Add some comments explaining the various
2749 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2751 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2753 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2756 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2757 operand specifiers in fmovm* instructions.
2759 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2761 * ppc-opc.c (insert_li): Give an error if the offset has the two
2762 least significant bits set.
2764 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2766 * mips-dis.c (print_insn_mips16): Separate the instruction from
2767 the arguments with a tab, not a space.
2769 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2771 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2774 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2777 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2779 * configure: Rebuild with autoconf 2.12.
2781 Add support for mips16 (16 bit MIPS implementation):
2782 * mips16-opc.c: New file.
2783 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2784 (mips16_reg_names): New static array.
2785 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2786 after seeing a 16 bit symbol.
2787 (print_insn_little_mips): Likewise.
2788 (print_insn_mips16): New static function.
2789 (print_mips16_insn_arg): New static function.
2790 * mips-opc.c: Add jalx instruction.
2791 * Makefile.in (mips16-opc.o): New target.
2792 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2793 * configure: Rebuild.
2795 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2797 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2798 operand specifiers in *save, *restore and movem* instructions.
2800 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2803 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2804 register operands for immediate arithmetic, not, neg, negx, and
2805 set according to condition instructions.
2807 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2808 specifier of the effective-address operand in immediate forms of
2809 arithmetic instructions. The specifier for the immediate operand
2810 notes how and where the constant will be stored.
2812 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2814 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2817 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2820 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2822 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2824 * mn10300-dis.c (disassemble): Handle register lists.
2826 * mn10300-opc.c: Fix handling of register list operand for
2827 "call", "ret", and "rets" instructions.
2829 * mn10300-dis.c (disassemble): Print PC-relative and memory
2830 addresses symbolically if possible.
2831 * mn10300-opc.c: Distinguish between absolute memory addresses,
2832 pc-relative offsets & random immediates.
2834 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2836 (disassemble): Handle SPLIT and EXTENDED operands.
2838 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2840 * mn10300-dis.c: Rough cut at printing some operands.
2842 * mn10300-dis.c: Start working on disassembler support.
2843 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2845 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2847 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2849 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2851 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2853 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2855 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2856 register argument is calls and jmp instructions.
2858 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2860 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2861 getx operand. Fix opcode for mulqu imm,dn.
2863 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2865 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2866 in MN10300_OPERAND_SPLIT operands for how many bits
2867 appear in the basic insn word. Add IMM32_HIGH24,
2868 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2869 (mn10300_opcodes): Use new operands as needed.
2871 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2872 for bset, bclr, btst instructions.
2873 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2875 * mn10300-opc.c (mn10300_operands): Remove many redundant
2876 operands. Update opcode table as appropriate.
2877 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2878 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2880 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2882 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2883 operands (for indexed load/stores). Fix bitpos for DI
2884 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2885 few instructions that insert immediates/displacements in the
2886 middle of the instruction. Add IMM8E for 8 bit immediate in
2887 the extended part of an instruction.
2888 (mn10300_operands): Use new opcodes as appropriate.
2890 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2892 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2893 sequential so the assembler never parallelizes it with
2896 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2898 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2899 a data/address register that appears in register field 0
2900 and register field 1.
2901 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2903 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2905 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2906 standard disassembly.
2908 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2909 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2910 Recategorize PALcode instructions.
2912 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2914 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2916 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2918 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2919 there are no operand types.
2921 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2923 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2925 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2927 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2929 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2931 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2933 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2934 and sst.w instructions.
2936 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2939 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2941 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2944 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2946 * ppc-opc.c (PPCPWR2): Define.
2947 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2950 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2952 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2953 field for movhu instruction.
2955 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2956 cast value to "long" not "signed long" to keep hpux10
2959 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2961 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2964 * mn10300-opc.c (FMT*): Remove definitions.
2966 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2967 for shift-by-register opcodes.
2969 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2970 into [AD][MN][01] for encoding the position of the register
2973 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2975 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2976 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2978 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2980 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2981 Fix various typos. Add "PAREN" operand.
2982 (MEM, MEM2): Define.
2983 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2984 operands. Fix several typos.
2986 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2989 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2991 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2992 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2994 (mn10300_opcodes): Break opcode format out into its own field.
2995 Update many operand fields to deal with signed vs unsigned
2996 issues. Fix one or two typos in the "mov" instruction
2997 opcode, mask and/or operand fields.
2999 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3001 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3002 m68851 wasn't reset.
3004 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3006 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3007 all opcodes. Very rough cut at operands for all opcodes.
3009 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3012 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3014 * mn10200-opc.c, mn10300-opc.c: New files.
3015 * mn10200-dis.c, mn10300-dis.c: New files.
3016 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3017 * disassemble.c: Break mn10x00 support into 10200 and 10300
3019 * configure.in: Likewise.
3020 * configure: Rebuilt.
3022 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3024 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3026 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3030 * disassemble (ARCH_mn10x00): Define.
3031 (disassembler): Handle bfd_arch_mn10x00.
3032 * configure.in: Recognize bfd_mn10x00_arch.
3033 * configure: Rebuilt.
3035 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3037 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3038 accordingly. Don't declare functions using op_rtn.
3040 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3042 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3043 params to be more standard.
3044 * (disassemble): Print absolute addresses and symbolic names for
3045 branch and jump targets.
3046 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3048 * (v850_opcodes): Add breakpoint insn.
3050 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3052 * m68k-opc.c: Move the fmovemx data register cases before the
3053 other cases, so that they get recognized before the data register
3054 does gets treated as a degenerate register list.
3056 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3058 * mips-opc.c: Add a case for "div" and "divu" with two registers
3059 and a destination of $0.
3061 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3063 * mips-dis.c (print_insn_arg): Add prototype.
3064 (_print_insn_mips): Ditto.
3066 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3068 * mips-dis.c (print_insn_arg): Print condition code registers as
3071 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3073 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3075 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3077 * v850-dis.c (disassemble): Make static. Provide prototype.
3079 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3081 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3084 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3086 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3087 ']' characters into the output stream.
3088 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3089 Add "memop" field to all opcodes (for the disassembler).
3090 Reorder opcodes so that "nop" comes before "mov" and "jr"
3091 comes before "jarl".
3093 * v850-dis.c (print_insn_v850): Fix typo in last change.
3095 * v850-dis.c (print_insn_v850): Properly handle disassembling
3096 a two byte insn at the end of a memory region when the memory
3097 region's size is only two byte aligned.
3099 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3101 * v850-dis.c (v850_reg_names): Define.
3102 (v850_sreg_names, v850_cc_names): Likewise.
3103 (disassemble): Very rough cut at printing operands (unformatted).
3105 * v850-opc.c (BOP_MASK): Fix.
3106 (v850_opcodes): Fix mask for jarl and jr.
3108 * v850-dis.c: New file. Skeleton for disassembler support.
3109 * Makefile.in Remove v850 references, they're not needed here.
3110 * configure.in: Add v850-dis.o when building v850 toolchains.
3111 * configure: Rebuilt.
3112 * disassemble.c (disassembler): Call v850 disassembler.
3114 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3115 (insert_d8_6, extract_d8_6): New functions.
3116 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3117 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3119 (IF4A, IF4B): Use "D7" instead of "D7S".
3120 (IF4C, IF4D): Use "D8_7" instead of "D8".
3121 (IF4E, IF4F): New. Use "D8_6".
3122 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3123 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3125 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3126 (v850_operands): Change D16 to D16_15, use special insert/extract
3127 routines. New new D16 that uses the generic insert/extract code.
3128 (IF7A, IF7B): Use D16_15.
3129 (IF7C, IF7D): New. Use D16.
3130 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3132 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3133 message. Issue an error if the branch offset is odd.
3135 * v850-opc.c: Add notes about needing special insert/extract
3136 for all the load/store insns, except "ld.b" and "st.b".
3138 * v850-opc.c (insert_d22, extract_d22): New functions.
3139 (v850_operands): Use insert_d22 and extract_d22 for
3141 (insert_d9): Fix range check.
3143 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3145 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3146 and set bits field to D9 and D22 operands.
3148 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3150 * v850-opc.c (v850_operands): Define SR2 operand.
3151 (v850_opcodes): "ldsr" uses R1,SR2.
3153 * v850-opc.c (v850_opcodes): Fix opcode specs for
3154 sld.w, sst.b, sst.h, sst.w, and nop.
3156 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3158 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3159 end of the opcode table.
3161 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3163 * d10v-opc.c (pre_defined_registers): Added register pairs,
3164 "r0-r1", "r2-r3", etc.
3166 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3168 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3169 Create I16U for an unsigned 16bit mmediate operand.
3170 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3172 * v850-opc.c (v850_operands): Define EP operand.
3173 (IF4A, IF4B, IF4C, IF4D): Use EP.
3175 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3176 with immediate operand, "movhi". Tweak "ldsr".
3178 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3179 correct. Get sld.[bhw] and sst.[bhw] closer.
3181 * v850-opc.c (v850_operands): "not" is a two byte insn
3183 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3185 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3187 * v850-opc.c (two): Get order of words correct.
3189 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3191 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3192 register source and destination operands.
3193 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3195 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3196 same thinko in "trap" opcode.
3198 * v850-opc.c (v850_opcodes): Add initializer for size field
3201 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3202 Add D8 for 8-bit unsigned field in short load/store insns.
3203 (IF4A, IF4D): These both need two registers.
3204 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3205 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3206 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3207 for "ldsr" and "stsr".
3208 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3211 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3212 short store word (sst.w).
3214 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3216 * v850-opc.c (v850_operands): Added insert and extract fields,
3217 pointers to functions that handle unusual operand encodings.
3219 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3221 * v850-opc.c (v850_opcodes): Enable "trap".
3223 * v850-opc.c (v850_opcodes): Fix order of displacement
3224 and register for "set1", "clr1", "not1", and "tst1".
3226 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3228 * v850-opc.c (v850_operands): Add "B3" support.
3229 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3232 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3234 * v850-opc.c: Close unterminated comment.
3236 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3238 * v850-opc.c (v850_operands): Add flags field.
3239 (v850_opcodes): add move opcodes.
3241 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3243 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3244 * configure: (bfd_v850v_arch) Add new case.
3245 * configure.in: (bfd_v850_arch) Add new case.
3246 * v850-opc.c: New file.
3248 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3250 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3252 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3254 * d10v-opc.c: Add additional information to the opcode
3255 table to help determinine which instructions can be done
3258 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3260 * mpw-make.sed: Update editing of include pathnames to be
3263 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3265 * arm-opc.h: Added "bx" instruction definition.
3267 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3269 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3271 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3275 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3277 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3279 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3281 * makefile.vms: Update for alpha-opc changes.
3283 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3285 * i386-dis.c (print_insn_i386): Actually return the correct value.
3286 (ONE, OP_ONE): #ifdef out; not used.
3288 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3290 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3291 Changed subi operand type to treat 0 as 16.
3293 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3295 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3298 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3300 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3301 memory transfer instructions. Add new format string entries %h and %s.
3302 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3305 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3307 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3308 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3310 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * alpha-dis.c (print_insn_alpha_osf): Remove.
3313 (print_insn_alpha_vms): Remove.
3314 (print_insn_alpha): Make globally visible. Chose the register
3315 names based on info->flavour.
3316 * disassemble.c: Always return print_insn_alpha for the alpha.
3318 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3320 * d10v-dis.c (dis_long): Handle unknown opcodes.
3322 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3324 * d10v-opc.c: Changes to support signed and unsigned numbers.
3325 All instructions with the same name that have long and short forms
3326 now end in ".l" or ".s". Divs added.
3327 * d10v-dis.c: Changes to support signed and unsigned numbers.
3329 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3331 * d10v-dis.c: Change all functions to use info->print_address_func.
3333 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3335 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3336 move ccr/sr insns more strict so that the disassembler only
3337 selects them when the addressing mode is data register.
3339 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3340 * d10v-opc.c (pre_defined_registers): Declare.
3341 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3342 to pick a better name for the registers.
3344 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3346 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3347 operands for fexpand and fpmerge. From Christian Kuehnke
3348 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3350 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3352 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3353 print routine. Take new regnames and cpumask arguments.
3354 Kill the environment variable nonsense.
3355 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3356 (print_insn_alpha_vms): New function. Do VMS style regnames.
3357 * disassemble.c (disassembler): Test bfd flavour to pick
3358 between OSF and VMS routines. Default to OSF.
3360 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3362 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3363 * configure: Rebuild.
3364 * Makefile.in (install): Use @INSTALL_SHLIB@.
3366 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3368 * configure: (bfd_d10v_arch) Add new case.
3369 * configure.in: (bfd_d10v_arch) Add new case.
3370 * d10v-dis.c: New file.
3371 * d10v-opc.c: New file.
3372 * disassemble.c (disassembler) Add entry for d10v.
3374 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3376 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3377 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3379 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3381 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3382 distinguish between variants of the instruction set.
3383 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3384 distinguish between variants of the instruction set.
3386 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3388 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3389 the 8086 instruction set.
3390 * i386-dis.c: General cleanups. Make most things static. Add
3391 prototypes. Get rid of static variables aflags and dflags. Pass
3392 them as args (to almost everything).
3394 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3396 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3398 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3400 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3401 if the next arg is marked with SRC_IN_DST. Gross.
3403 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3404 we're looking for and find EXR.
3406 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3407 if we're looking for KBIT and we don't find it.
3409 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3412 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3413 3bit immediate operands.
3415 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3417 * Released binutils 2.7.
3419 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3420 <kkaempf@progis.ac-net.de>.
3422 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3426 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3428 * sparc-dis.c (print_insn_sparclite): New routine to print
3429 sparclite instructions.
3431 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3433 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3435 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3437 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3438 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3439 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3441 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3443 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3444 Use autoconf-set values.
3445 (docdir, oldincludedir): Removed.
3446 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3448 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3450 * alpha-opc.c: New file.
3451 * alpha-opc.h: Remove.
3452 * alpha-dis.c: Complete rewrite to use new opcode table.
3453 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3454 * configure: Rebuild with autoconf 2.10.
3455 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3456 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3458 (alpha-opc.o): New target.
3460 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3463 Set imm_added_to_rs1 even if the source and destination register
3466 * sparc-opc.c: Add some two operand forms of the wr instruction.
3468 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3470 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3473 * disassemble.c (disassembler): Handle H8/S.
3474 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3476 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3478 * sparc-opc.c: Add beq/teq as aliases for be/te.
3480 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3481 <sergei@msil.sps.mot.com>.
3483 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3485 * makefile.vms: New file.
3487 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3489 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3491 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3494 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3496 * i386-dis.c (OP_OFF): Call append_prefix.
3498 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3500 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3501 unsigned long to silence a warning from the Solaris PowerPC
3504 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3506 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3508 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3510 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3512 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3513 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3514 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3515 cpush, cpusha, cpull sparclet insns.
3517 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3519 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3521 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3523 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3524 Set F_FLOAT on other floating point instructions.
3526 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3528 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3530 (powerpc_opcodes): Add 860/821 specific SPRs.
3532 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3534 * configure.in: Permit --enable-shared to specify a list of
3535 directories. Set and substitute BFD_PICLIST.
3536 * configure: Rebuild.
3537 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3538 uses. Set to @BFD_PICLIST@.
3540 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3542 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3543 not "abs", which may be needed for the absolute in something
3544 like btst #0,@10:8. Print L_3 immediates separately from other
3545 immediates. Change ABSMOV reference to ABS8MEM.
3547 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3549 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3550 (current_arch_mask): New static global.
3551 (compute_arch_mask): New static function.
3552 (print_insn_sparc): Delete sparc_v9_p. New static local
3553 current_mach. Resort opcode table if current_mach changes.
3554 Generalize "insn not supported" test.
3555 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3556 Delete test for v9/!v9.
3557 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3559 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3560 (brfcx): Renamed to FBRX.
3561 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3562 coprocessor mnemonics are not supported on the sparclet).
3563 (condf): Renamed to CONDF.
3564 (SLCBCC2): Delete F_ALIAS flag.
3566 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3568 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3569 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3571 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3573 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3574 that the shared library version number is set correctly.
3576 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3578 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3579 Miles Bader <miles@gnu.ai.mit.edu>.
3580 * configure: Rebuild.
3582 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3584 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3587 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3589 * configure: Rebuild with autoconf 2.8.
3591 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3593 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3594 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3596 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3598 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3599 since they appear as targets in Makefile.in.
3600 * configure: Rebuild.
3602 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3604 * mpw-make.sed: Edit out shared library support bits.
3606 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3608 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3609 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3610 (sparc_opcodes): Add sparclet insns.
3611 (sparclet_cpreg_table): New static local.
3612 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3613 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3615 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3617 * i386-dis.c (index16): New static variable.
3618 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3620 (OP_indirE): Return result of OP_E.
3621 (OP_E): Check for 16 bit addressing mode, and disassemble
3622 correctly. Optimised 32 bit case a little. Don't print
3623 "(base,index,scale)" when sib specifies only an offset.
3625 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3627 * configure.in: Set and substitute SHLIB_DEP.
3628 * configure: Rebuild.
3629 * Makefile.in (SHLIB_DEP): New variable.
3630 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3631 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3632 COMMON_SHLIB, add them to piclist with appropriate modifications.
3633 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3634 here: just use piclist.
3636 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3638 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3639 (print_insn_sparc): Rewrite v9/not-v9 tests.
3640 (compare_opcodes): Likewise.
3641 * sparc-opc.c (MASK_<ARCH>): Define.
3642 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3643 (sparclet,v6notv9): Define.
3644 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3645 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3647 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3649 * configure.in: Call AC_PROG_CC before configure.host.
3650 * configure: Rebuild.
3652 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3654 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3656 * i386-dis.c (onebyte_has_modrm): New static array.
3657 (twobyte_has_modrm): New static array.
3658 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3660 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3662 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3665 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3667 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3670 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3672 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3673 m68010up, not just m68020up | cpu32.
3675 * Makefile.in (SONAME): New variable.
3676 ($(SHLINK)): Make a link to the transformed name, as well.
3677 (stamp-tshlink): New target.
3678 (install): Skip stamp-tshlink during install.
3680 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * configure.in: Call AC_ARG_PROGRAM.
3683 * configure: Rebuild.
3684 * Makefile.in (program_transform_name): New variable.
3685 (install): Transform library name before installing it.
3687 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3689 * i960-dis.c (mem): Add HX dcinva instruction.
3691 Support for building as a shared library, based on patches from
3692 Alan Modra <alan@spri.levels.unisa.edu.au>:
3693 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3694 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3695 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3696 * configure: Rebuild.
3697 * Makefile.in (ALLLIBS): New variable.
3698 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3699 (COMMON_SHLIB, SHLINK): New variables.
3700 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3701 (STAGESTUFF): Remove variable.
3702 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3703 (stamp-piclist, piclist): New targets.
3704 ($(SHLIB), $(SHLINK)): New targets.
3705 ($(OFILES)): Depend upon stamp-picdir.
3706 (disassemble.o): Build twice if PICFLAG is set.
3707 (MOSTLYCLEAN): Add pic/*.o.
3708 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3709 (distclean): Remove pic and stamp-picdir.
3710 (install): Install shared libraries.
3711 (stamp-picdir): New target.
3713 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3715 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3716 Print unknown instruction as "unknown", rather than in hex.
3718 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3722 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3724 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3726 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3728 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3729 when necessary. From Ulrich Drepper
3730 <drepper@myware.rz.uni-karlsruhe.de>.
3732 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3734 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3735 sparc_num_opcodes. Update architecture enum values.
3736 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3737 (sparc_opcode_lookup_arch): New function.
3738 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3739 (sparc_opcodes): Add v9a shutdown insn.
3741 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3743 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3744 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3746 (print_insn_sparc64): Deleted.
3747 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3750 * sparc-opc.c (architecture_pname): Add v9a.
3752 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3754 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3755 incorrectly defined as 0x16 when it should be 0x15.
3756 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3757 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3758 excb (exception barrier) which is defined in the Alpha
3759 Architecture Handbook version 2.
3760 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3761 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3762 disassembled as or, for example.
3764 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3766 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3767 (_print_insn_mips): Change i from int to unsigned int.
3769 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3771 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3772 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3774 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3776 * i386-dis.c: Added Pentium Pro instructions.
3778 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3780 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3783 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3785 * sh-opc.h (sh_nibble_type): Added REG_B.
3786 (sh_arg_type): Added A_REG_B.
3787 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3789 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3791 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3793 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3795 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3797 * Makefile.in (distclean): Remove stamp-h. From Ronald
3798 F. Guilmette <rfg@monkeys.com>.
3800 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3802 From David Mosberger-Tang <davidm@azstarnet.com>:
3803 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3806 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3808 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3809 (sh_table): Added many SH3 opcodes.
3810 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3812 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3814 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3815 (subco,subco.): Mark this PPC, not PPCCOM.
3817 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3819 * configure: Rebuild with autoconf 2.7.
3821 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3823 * configure: Rebuild with autoconf 2.6.
3825 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3827 * configure.in: Sort list of architectures. Accept but do nothing
3828 for alliant, convex, pyramid, romp, and tahoe.
3830 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3832 * a29k-dis.c (print_special): Change num to unsigned int.
3834 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3836 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3839 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3841 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3842 * configure: Rebuilt.
3844 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3846 * configure.in: Add case for bfd_i860_arch.
3847 * configure: Rebuild.
3849 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3851 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3852 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3853 (NEXTDOUBLE): Likewise.
3854 (print_insn_m68k): Don't match fmoveml if there is more than one
3855 register in the list.
3856 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3858 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3860 * m68k-opc.c: Use #W rather than #w.
3861 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3863 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3865 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3866 and likewise for all the dbxx opcodes.
3868 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3870 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3872 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3874 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3875 the VR4100 specific instructions to the mips_opcodes structure.
3877 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3879 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3880 ugly Metrowerks bug in CW6, is fixed in CW7.
3882 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3884 * ppc-opc.c (whole file): Add flags for common/any support.
3886 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3888 * Makefile.in (BISON): Remove macro.
3889 (FLAGS_TO_PASS): Remove BISON.
3891 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3893 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3895 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3896 instructions that take no args by looking at the match mask.
3897 (print_insn_arg): Always print "%" before register names.
3898 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3899 [case '_']: Don't print "@#" before address.
3900 [case 'J']: Use "%s" as format string, not register name.
3901 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3903 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3905 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3908 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3910 From David Mosberger-Tang <davidm@azstarnet.com>
3912 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3913 (alpha_insn_set): added definitions for VAX floating point
3914 instructions (Unix compilers don't generate these, but handcoded
3915 assembly might still use them).
3917 * alpha-dis.c (print_insn_alpha): added support for disassembling
3918 the miscellaneous instructions in the Alpha instruction set.
3920 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3922 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3923 no longer create sysdep.h, sed ppc-opc.c to work around a
3924 serious Metrowerks C bug.
3925 * mpw-make.in: Remove.
3926 * mpw-make.sed: New file, used by mpw-configure to edit
3927 Makefile.in into an MPW makefile.
3929 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3931 * Makefile.in (maintainer-clean): New synonym for realclean.
3933 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3935 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3936 which use '0', '1', and '2' instead. Specify the proper size for
3937 a pmove immediate operand. Correct the pmovefd patterns to be
3938 moves to a register, not from a register.
3939 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3941 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3943 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3944 %psr, %wim, %tbr as F_NOTV9.
3946 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3948 * Makefile.in (Makefile): Just rebuild Makefile when running
3950 (config.h, stamp-h): New targets.
3951 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3952 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3953 rebuilding config.h.
3954 * configure: Rebuild.
3956 * mips-opc.c: Change unaligned loads and stores with "t,A"
3957 operands to use "t,A(b)".
3959 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3961 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3963 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3965 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3966 until 3 instead of until 2.
3968 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3970 * Makefile.in (ALL_CFLAGS): Define.
3971 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3972 (MOSTLYCLEAN): Add config.log.
3973 (distclean): Don't remove config.log.
3974 * configure.in: Substitute HDEFINES.
3975 * configure: Rebuild.
3977 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3979 * sh-opc.h (sh_arg_type): Add F_FR0.
3980 (sh_table, case fmac): Add F_FR0 as first argument.
3982 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3984 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3986 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3988 * sparc-dis.c: Remove all references to NO_V9.
3990 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3992 * aclocal.m4: Just include ../bfd/aclocal.m4.
3993 * configure: Rebuild.
3995 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3997 * sparc-dis.c (X_DISP19): Define.
3998 (print_insn, case 'G'): Use it.
3999 (print_insn, case 'L'): Sign extend displacement.
4001 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4003 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4004 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4005 host_makefile_frag or frags.
4006 * aclocal.m4: New file.
4007 * configure: Rebuild.
4008 * Makefile.in (INSTALL): Set to @INSTALL@.
4009 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4010 (INSTALL_DATA): Set to @INSTALL_DATA@.
4012 (AR_FLAGS): Set to rc rather than qc.
4013 (CC): Define as @CC@.
4014 (CFLAGS): Set to @CFLAGS@.
4015 (@host_makefile_frag@): Remove.
4016 (config.status): Remove dependency upon @frags@.
4018 * configure.in: ../bfd/config.bfd now just sets shell variables.
4019 Use them rather than looking through target Makefile fragments.
4020 * configure: Rebuild.
4022 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4024 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4026 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4028 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4029 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4032 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4033 (lookup_{name,value}): New functions.
4034 (prefetch_table): New static local.
4035 (sparc_{encode,decode}_prefetch): New functions.
4036 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4038 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4040 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4043 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4045 * sh-dis.c: Correct comment on first line of file.
4047 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4049 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4051 * sparc-opc.c (asi, membar): New static locals.
4052 (sparc_{encode,decode}_{asi,membar}): New functions.
4053 (sparc_opcodes, membar insn): Fix.
4054 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4055 Support decoding of membar masks.
4058 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4060 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4062 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4064 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4065 and likewise for the other branches. Add bhs as an alias for bcc,
4066 and likewise for the size variants. Add dbhs as an alias for
4069 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4071 * sh-opc.h (FP sts instructions): Update to match reality.
4073 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4075 * m68k-dis.c: (fpcr_names): Add % before all register names.
4076 (reg_names): Likewise.
4077 (print_insn_arg): Don't explicitly print % before register names.
4078 Add % before register names in static array names. In case 'r',
4079 print data registers as `@(Dn)', not `Dn@'. When printing a
4080 memory address, don't print @# before it.
4081 (print_indexed): Change base_disp and outer_disp from int to
4082 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4083 syntax. Sign extend 8 byte displacement correctly.
4084 (print_base): Print using MIT syntax. Print zpc when appropriate.
4085 Change parameter disp from int to bfd_vma.
4087 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4090 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4092 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4093 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4094 * sh-opc.h (sh_arg_type): Add new operand types.
4095 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4097 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4099 * Makefile.in (distclean): Remove generated file config.h.
4101 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4103 * Makefile.in (distclean): Remove generated file config.h.
4105 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4107 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4109 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4111 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4112 rather than numopcodes. Use m68k_opcodes rather than removed
4113 opcode function. Don't check F_ALIAS.
4114 (print_insn_arg): Change first parameter to be const char *.
4115 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4116 (m68k-opc.o): New target.
4117 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4118 * configure: Rebuild.
4120 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4122 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4123 (opcode_bits, opcode_hash_table): New variables.
4124 (opcodes_initialized): Renamed from opcodes_sorted.
4125 (build_hash_table): New function.
4126 (is_delayed_branch): Use hash table.
4127 (print_insn): Renamed from print_insn_sparc, made static.
4128 Build and use hash table. If !sparc64, ignore sparc64 insns,
4129 and vice-versa if sparc64.
4130 (print_insn_sparc, print_insn_sparc64): New functions.
4131 (compare_opcodes): Move sparc64 opcodes to end.
4132 Print commutative insns with constant second.
4133 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4135 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4137 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4138 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4139 avoids printing a delay slot in a delay slot.
4140 * sh-opc.h (sh_table): Fully bracket last entry.
4142 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4144 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4146 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4148 * configure.in: Get host_makefile_frag from ${srcdir}.
4150 * configure.in: Autoconfiscated. Check for string[s].h. Create
4151 config.h from config.in. Don't set up sysdep.h link.
4152 * sysdep.h: New file.
4153 * configure, config.in: New files, generated from configure.in.
4154 * Makefile.in: Updated to be processed autoconf-style.
4155 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4156 (Makefile): Depend on config.status.
4157 (config.status): New rule.
4158 * configure.bat: Update Makefile substitutions.
4160 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4162 * mips-opc.c (L1): Define.
4163 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4164 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4167 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4169 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4170 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4171 have multiple add units but only a single logical unit.
4173 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4174 shifted by 18, without any insertion or extraction function.
4175 (insert_cr, extract_cr): Remove.
4177 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4179 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4182 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4184 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4185 * sh-opc.h: Add copyright.
4187 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4189 * Makefile.in (crunch-m68k): Delete extra target accidentally
4190 checked in a while ago.
4192 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4194 * sh-opc.h (sh_table): Add SH3 support.
4196 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4198 * sh-opc.h: Added bsrf and braf.
4200 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4202 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4203 bogus [ls]fm{ea,fd} patterns.
4205 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4206 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4207 initialize it from memory. Make function static.
4208 (print_insn_{big,little}_arm): New functions.
4209 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4210 the correct endianness.
4212 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4214 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4217 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4219 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4220 17th, so that it builds again using GCC as the compiler.
4222 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4224 * mips-dis.c (print_insn_little_mips): Cast return value from
4225 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4226 expects an unsigned long, and that might be fewer words of
4227 argument storage (e.g., if bfd_vma is long long on a 32-bit
4229 (print_insn_big_mips): Likewise with bfd_getb32 value.
4230 (_print_insn_mips): Now static.
4232 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4234 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4235 gcc memory hog problem with initializer is fixed.
4237 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4239 Merge in support for Mac MPW as a host.
4240 (Old change descriptions retained for informational value.)
4242 * mpw-config.in (archname): Compute from the config.
4243 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4245 * mpw-config.in (target_arch): Compute from canonical target.
4246 (m68k, mips, powerpc, sparc): Add architectures.
4247 * mpw-make.in (disassemble.c.o): Add.
4248 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4250 * mpw-config.in (BFD_MACHINES): Set to a default value.
4251 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4253 * mpw-make.in (CSEARCH): Add extra-include to search path.
4255 * mpw-config.in (varargs.h): Don't create.
4256 (sysdep.h): Create using forward-include.
4257 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4259 * mpw-config.in: New file, MPW version of configure.in.
4260 * mpw-make.in: New file, MPW version of Makefile.in.
4262 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4264 * alpha-dis.c (print_insn_alpha): Put empty statement after
4267 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4269 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4270 (low_sign_extend): Likewise.
4271 (get_field): Delete unused function.
4272 (set_field, deposit_14, deposit_21): Likewise.
4274 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4276 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4279 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4281 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4283 * alpha-opc.h (OSF_ASMCODE): define
4284 print pal-code names as defined in App C of the
4285 Alpha Architecture Reference Manual
4287 * alpha-dis.c: cleaned up output
4288 print stylized code forms as defined in App A.4.3 of the
4289 Alpha Architecture Reference Manual
4291 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4293 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4295 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4298 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4300 * m68k-dis.c (opcode): New function. Returns address of opcode
4301 table entry given index, even if the opcode table was split to
4302 work around gcc bugs.
4303 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4305 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4306 (reg_names): Now const.
4307 (print_insn_arg): Arrays cacheFieldName and names now const.
4308 (print_indexed): Array scales now const.
4310 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4312 * ppc-opc.c: Sort recently added instructions by minor opcode
4313 number within major opcode number.
4315 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4317 * hppa-dis.c: Include libhppa.h.
4319 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4321 * mips-opc.c: Change dli to use M_DLI, and add dla.
4323 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4325 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4327 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4329 * mips-opc.c: Add r4650 mul instruction.
4331 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4333 * mips-opc.c: Add uld and usd macros for unaligned double load and
4336 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4338 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4339 mfdcr, mtdcr, icbt, iccci.
4341 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4343 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4344 signed char fields to shorts, more portable.
4346 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4348 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4349 char fields as signed chars, since they may have negative values.
4351 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4353 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4354 (mycroft@netbsd.org).
4356 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4358 From "Logg, Ed" <elogg@ea.com>:
4359 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4360 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4363 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4365 * ppc-opc.c: Changes based on patch from David Edelsohn
4366 <edelsohn@mhpcc.edu>.
4367 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4370 (insert_tbr): New static function.
4371 (extract_tbr): New static function.
4372 (XFXFXM_MASK, XFXM): Define.
4373 (XSPRBAT_MASK, XSPRG_MASK): Define.
4374 (powerpc_opcodes): Add instructions to access special registers by
4375 name. Add mtcr and mftbu.
4377 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4379 * mips-opc.c (P3): Define.
4380 (mips_opcodes): Add mad and madu.
4382 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4384 * configure.in: Add W65 support.
4385 * disassemble.c: Likewise.
4386 * w65-opc.h, w65-dis.c: New files.
4388 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4390 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4393 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4395 * mips-opc.c: Add dli as a synonym for li.
4397 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4399 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4400 print something for reserved opcode values, even if it won't
4403 * mips-dis.c (_print_insn_mips): When initializing, shift right
4404 and mask, to avoid sign extension problems on the Alpha.
4406 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4409 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4411 * sh-opc.h (mov.l gbr): Get direction right.
4412 * sh-dis.c (print_insn_shx): New function.
4413 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4414 print opcodes with right byte order.
4416 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4418 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4419 to avoid conflicts with getopt.
4421 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4423 * hppa-dis.c (print_insn_hppa): Read the instruction using
4424 bfd_getb32, so that it works on a little endian or 64 bit host.
4425 Remove unused local variable op.
4427 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4429 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4430 addu does not work correctly if -mips3.
4432 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4434 * a29k-dis.c (print_special): Add special register names defined
4435 on 29030, 29040 and 29050.
4436 (print_insn): Handle new operand type 'I'.
4438 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4440 * Makefile.in (INSTALL): Use top level install.sh script.
4442 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4444 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4445 that it works on a little endian host.
4447 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4449 * configure.in: Use ${config_shell} when running config.bfd.
4451 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4453 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4455 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4457 * a29k-dis.c (print_insn): Print the opcode.
4459 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4461 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4463 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4465 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4467 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4469 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4470 which store a value into memory.
4472 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4474 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4475 * arm-dis.c, arm-opc.h: New files.
4477 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4479 * Makefile.in (ns32k-dis.o): Add dependency.
4480 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4481 string, not as array of chars.
4483 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4485 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4487 * sparc-opc.c: Added sparclite extended FP operations, and
4488 versions of v9 impdep* instructions permitting specification of
4491 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4493 * i960-dis.c (reg_names): Now const.
4494 (struct sparse_tabent): New type, copied from array type in mem
4496 (ctrl): Local static array ctrl_tab now const.
4497 (cobr): Local static array cobr_tab now const.
4498 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4499 static variable mem_tab no longer explicitly initialized. Changed
4500 mem_init to const array of struct sparse_tabent.
4501 (reg): Local static variable reg_tab no longer explicitly
4502 initialized. Changed reg_init to const array of struct
4504 (ea): Local static array scale_tab now const.
4506 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4509 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4511 * configure.bat: the disassember needs to be enabled for
4512 "objdump -d" to work in djgpp.
4514 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4516 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4517 (invalid_float): Enabled general version, doesn't require running
4518 on ns32k host. Changed to take char* argument, and test for
4519 explicitly specified sizes, instead of using sizeof() on host CPU
4521 (INVALID_FLOAT): Cast first argument.
4522 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4523 list_P032, list_M032): Now const.
4524 (optlist, list_search): Made appropriate arguments now point to
4526 (print_insn_arg): Changed static array of one-character-string
4527 pointers into a static const array of characters; fixed sprintf
4528 statement accordingly.
4530 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4532 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4533 from distribution. A ns32k-dis.c from a previous distribution has
4534 been brought up to date and supports the new interface.
4536 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4538 * configure.in: add bfd_ns32k_arch target support.
4540 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4541 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4543 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4545 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4548 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4550 * h8300-dis.c, mips-dis.c: Don't use true and false.
4552 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4554 * configure.in: Change --with-targets to --enable-targets.
4556 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4558 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4559 opcodes to the first instruction with that opcode, to speed
4560 disassembly of large files. From ralphc@pyramid.com (Ralph
4563 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4567 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4569 * configure.bat: update to latest makefile.in
4571 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4573 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4574 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4575 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4576 slot insn is in a delay slot.
4577 * z8k-opc.h: (resflg): Fix patterns.
4578 * h8500-opc.h Fix CR insn patterns.
4580 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4582 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4583 "cmpl" before POWER versions, so that gas -many uses them.
4585 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4587 * disassemble.c: New file.
4588 * Makefile.in (OFILES): Add disassemble.o.
4589 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4590 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4591 binutils/configure.in.
4593 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4594 opcode being examined.
4596 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4598 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4599 (insert_ral, insert_ram, insert_ras): New functions.
4600 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4601 RAS for store with update.
4603 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4605 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4606 (edelsohn@npac.syr.edu).
4608 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4610 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4613 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4615 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4617 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4619 * ppc-opc.c (powerpc_operands): The signedp field has been
4620 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4621 instead. Add new operand SISIGNOPT.
4622 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4623 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4624 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4627 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4629 * i386-dis.c (struct private): Renamed to dis_private. `private'
4630 is a reserved word for dynix cc.
4632 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * configure.in: Change error message to refer to bfd/config.bfd
4635 rather than bfd/configure.in.
4637 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4639 * ppc-opc.c: Define POWER2 as short alias flag.
4640 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4643 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4645 * i960-dis.c (print_insn_i960): Don't read a second word for
4646 opcodes 0, 1, 2 and 3.
4648 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4650 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4652 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4654 * m68881-ext.c: Removed; no longer used.
4655 * Makefile.in: Changed accordingly.
4657 * m68k-dis.c (ext_format_68881): Don't declare.
4658 (print_insn_m68k): If an instruction uses place 'i', it uses at
4659 least four fixed bytes.
4660 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4661 extended float, convert to double using floatformat_to_double, not
4662 ieee_extended_to_double, and fetch the data before converting it.
4664 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4666 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4667 davidj@ICSI.Berkeley.EDU (David Johnson).
4669 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4671 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4672 PowerPC uses bdnz[l][a].
4674 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4676 * dis-buf.c, i386-dis.c: Include sysdep.h.
4678 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4680 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4682 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4683 by Motorola PowerPC 601 with PPC_OPCODE_601.
4684 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4685 Disassemble Motorola PowerPC 601 instructions as well as normal
4686 PowerPC instructions.
4688 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4690 * i960-dis.c (reg, mem): Just use a static array instead of
4693 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4695 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4696 condition name index if this is for a negated condition.
4698 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4699 Floating point format for 'H' operand is backwards from normal
4700 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4701 operands (fmpyadd and fmpysub), handle bizarre register
4702 translation correctly for single precision format.
4704 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4705 or 'I' operands if the next format specifier is 'M' (fcmp
4706 condition completer).
4708 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4710 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4711 single number giving a bitmask for the MB and ME fields of an M
4712 form instruction. Change NB to accept 32, and turn it into 0;
4713 also turn 0 into 32 when disassembling. Seperated SH from NB.
4714 (insert_mbe, extract_mbe): New functions.
4715 (insert_nb, extract_nb): New functions.
4716 (SC_MASK): Mask out SA and LK bits.
4717 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4718 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4719 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4720 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4721 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4722 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4723 (powerpc_macros): Define table of macro definitions.
4724 (powerpc_num_macros): Define.
4726 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4727 if PPC_OPERAND_NEXT is set.
4729 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4731 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4732 char. Retrieve contents using bfd_getl32 instead of shifting.
4734 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4736 * ppc-opc.c: New file. Opcode table for PowerPC, including
4737 opcodes for POWER (RS/6000).
4738 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4739 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4740 (CFILES): Add ppc-dis.c.
4741 (ppc-dis.o, ppc-opc.o): New targets.
4742 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4744 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4746 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4747 No space before 'u', 'f', or 'N'.
4749 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4751 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4752 farther than we should.
4754 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4756 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4758 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4760 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4762 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4763 needs it, to prevent reading past the end of a section.
4765 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4767 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4768 Removed t,A case for la; always use t,A(b) case.
4770 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4772 From Ted Lemen <mellon@pepper.ncd.com>
4773 * mips-dis.c (print_insn_arg): Handle 'k'.
4774 * mips-opc.c: Make cache use k, not t.
4776 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4778 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4779 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4780 FLOAT_FORMAT_CODE to put out floating point register names.
4782 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4784 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4786 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4788 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4790 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4792 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4793 larger than 32. Moved dsxx32 variants first for disassembler.
4795 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4797 * z8kgen.c, z8k-opc.h: Add full lda information.
4799 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4801 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4802 movb instructions. Any necessary space will be emitted by
4803 the code to handle nullification completers.
4805 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4809 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4811 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4812 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4814 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4818 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4820 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4821 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4823 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4825 * m88k-dis.c (m88kdis): comment change. Remove space after
4827 (printop): handle new arg types DEC and XREG for m88110.
4829 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4831 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4832 type for absolute branch addresses. Delete special
4833 "ble" and "be" code in 'W' operand code.
4835 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-opc.c: Set hazard information correctly for branch
4838 likely instructions.
4840 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4842 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4843 info->fprintf_func for printing and info->print_address_func for
4846 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4848 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4850 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4852 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4853 Corrected second case of "b" for disassembler.
4855 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4857 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4858 to BFD swapping routines to correspond to BFD name changes.
4860 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * mips-opc.c: Change div machine instruction to be z,s,t rather
4863 than s,t. Change div macro to be d,v,t rather than d,s,t.
4864 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4865 rem and remu which generates only the corresponding div
4866 instruction. This is for compatibility with the MIPS assembler,
4867 which only generates the simple machine instruction when an
4868 explicit destination of $0 is used.
4869 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4871 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4874 WR_31 hazard for bal, bgezal, bltzal.
4876 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4878 * hppa-dis.c (print_insn_hppa): Use print function
4879 from within the disassemble_info, not fprintf_filtered.
4881 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4883 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4884 Law, law@cs.utah.edu.)
4886 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4888 * mips-opc.c ("absu"): Removed.
4891 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4893 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4894 Changed hazard information to distinguish between memory load
4895 delays and coprocessor load delays.
4897 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4899 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4901 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4903 * configure.in: Don't pass cpu to config.bfd.
4905 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * m88k-dis.c (m88kdis): Make class unsigned.
4909 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4911 * alpha-dis.c (print_insn_alpha): One branch format case was
4912 missing the instruction name.
4914 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4916 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4917 Add the arch-specific auxiliary files.
4918 (OFILES): Remove the arch-specific auxiliary files
4919 and use BFD_MACHINES instead of DIS_LIBS.
4920 * configure.in: Set BFD_MACHINES based on --with-targets option.
4922 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4924 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4927 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4929 * sparc-opc.c: Change CONST to const to deal with gcc
4930 -Dconst=__const -traditional.
4932 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4934 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4935 coprocessor instructions out of #if 0, and made them use new
4938 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4940 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4942 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4944 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4945 instruction, for use by the disassembler.
4947 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4948 hand-coded sign extensions that depended on 32-bit host ints.
4949 FIXME, we still depend on big-endian host bitfield ordering.
4950 (sparc_print_insn): Set the insn_info_valid field, and the
4951 other fields that describe the instruction being printed.
4953 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4955 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4956 `jmp' instead of just one of them.
4958 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4960 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4961 (fput_fp_reg_r): Renamed from fput_reg_r.
4962 (fput_fp_reg): New function.
4963 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4965 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4967 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4969 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4971 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4973 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4974 don't output a space.
4976 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4978 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4980 * mips-opc.c: New file, containing opcode table from
4981 ../include/opcode/mips.h.
4982 * Makefile.in: Add it.
4984 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4986 * m88k-dis.c: New file, moved in from gdb and changed to use the
4987 new dis-asm.h disassembler interface.
4988 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4989 (m88k-dis.o): New target.
4991 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4993 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4994 argument string const char * to correspond to opcode/mips.h.
4996 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4998 * mips-dis.c: Updated to account for name changes in new version
5000 * Makefile.in: Added header file dependencies.
5002 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5004 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5006 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5008 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5009 extend, rather than shifts.
5011 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5013 * Makefile.in: Undo 15 June change.
5015 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5017 * m68k-dis.c (print_insn_arg): Change return value to byte count
5019 * m68k-dis.c: Re-write to detect invalid operands before
5020 printing anything, so we can handle this the same way we
5021 handle invalid opcodes.
5023 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5025 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5027 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5029 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5032 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5034 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5036 * configure.in: Do make sysdep.h link.
5037 * Makefile.in: Search ../include. Don't search ../bfd.
5039 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5041 Changes from Jeff Law, law@cs.utah.edu:
5042 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5043 Do not print a space before the completers specified by
5046 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5048 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5049 defined, since gdb has been fixed.
5051 Changes from Jeff Law, law@cs.utah.edu:
5052 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5053 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5054 be a *disassemble_info, not a *FILE.
5055 * hppa-dis.c: Support 'd', '!', and 'a'.
5056 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5057 * hppa-dis.c: Delete cases which are no longer needed.
5059 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5061 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5063 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5065 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5068 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5070 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5071 * configure.in: No longer need to configure to get sysdep.h.
5073 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5075 * Patches from Jeffrey Law <law@cs.utah.edu>.
5076 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5077 templates for 1.1 FP computational instructions.
5079 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5081 * h8500-dis.c (print_insn_h8500): Address argument is type
5083 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5086 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5087 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5089 * sparc-dis.c (compare_opcodes): Move static declaration to
5092 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5094 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5095 instruction, remove unimp hack from 'l' argument.
5097 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5099 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5102 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5104 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5105 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5108 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5110 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5111 arrays of string pointers to 2-d arrays of chars, to save
5114 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5116 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5117 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5119 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5121 * hppa-dis.c: New file from Utah, adapted to new disassembler
5123 * Makefile.in: Include it.
5125 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5127 * sh-dis.c, sh-opc.h: New files.
5129 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5131 * alpha-dis.c, alpha-opc.h: New files.
5133 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5135 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5138 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5140 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5142 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5144 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5147 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5149 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5150 and double percent signs a few places.
5152 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5154 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5155 Use info->print_address_func not print_address.
5157 * dis-buf.c (generic_print_address): New function.
5159 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5161 * Makefile.in: Add sparc-dis.c.
5162 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5164 Add `add' instruction to the set that get checked
5165 for a preceding `sethi' in order to print an absolute address.
5166 * (print_insn): Disassembly prefers real instructions.
5167 (is_delayed_branch): Speed up.
5168 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5169 Still missing some float ops, and needs testing.
5170 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5171 F_ALIAS. Use printf, not fprintf, when not passing a file
5173 (compare_opcodes): Check that identical instructions have
5174 identical opcodes, complain otherwise.
5177 * Include reg_names.
5179 Use dis-asm.h/read_memory_func interface.
5181 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5183 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5184 deliberately return non-zero to setjmp from longjmp. Otherwise
5185 this code fails to compile.
5187 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5189 * m68k-dis.c: Fix prototype for fetch_arg().
5191 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5193 * dis-buf.c: New file, for new read_memory_func interface.
5194 Makefile.in (OFILES): Include it.
5195 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5196 Use new read_memory_func interface.
5198 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5200 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5201 * h8500-opc.h: Fix couple of opcodes.
5203 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5205 * Makefile.in: add dvi & installcheck targets
5207 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5209 * Makefile.in: Update for h8500-dis.c.
5211 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5213 * h8500-dis.c, h8500-opc.h: New files
5215 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5217 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5218 ../include/dis-asm.h.
5219 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5220 and ../gdb/m68k-pinsn.c).
5221 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5222 and ../gdb/i386-pinsn.c).
5223 * m68881-ext.c: New file. Moved definition of
5224 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5225 * Makefile.in: Adjust for new files.
5226 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5227 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5228 can be dis-assembled.
5230 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5232 * mips-dis.c (print_insn_arg): Now returns void.
5234 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5236 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5237 files that use the macros.
5239 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5241 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5242 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5243 (CFILES): Added mips-dis.c.
5245 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5247 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5248 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5250 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5252 * Makefile.in: Improve *clean rules.
5253 * configure.in: Allow a default host.
5255 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5257 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5258 files include other sysdep files
5260 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5262 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5264 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5266 * configure.in: For host support, use ../bfd/configure.host
5267 so it stays in sync with the ../bfd/hosts database.
5269 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5271 * configure.in: use cpu-vendor-os triple instead of nested cases
5273 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5275 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5276 *always* the wrong one.
5278 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5280 * z8kgen.c: added copyright info
5282 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5284 * z8k-dis.c (unparse_instr): prettier tabs
5285 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5287 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5289 * configure.in: Add ncr* configuration.
5290 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5291 picayune ANSI compilers happy.
5293 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5295 * configure.in (i386): Make i386 and i486 synonymous for now.
5296 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5298 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5300 * Makefile.in (install): Fix typo.
5302 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5304 * Makefile.in (make): Remove obsolete crud.
5305 (sparc-opc.o): Avoid Sun Make VPATH bug.
5307 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5309 * Makefile.in: since there are no SUBDIRS, remove rule and
5310 references of subdir_do.
5312 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5314 * Makefile.in (install): Get the library name right here too.
5315 Don't install bfd.h, since it's unrelated to this library. No
5316 subdirs to recurse into, either.
5317 (CFILES): The source file has a .c suffix, not .o.
5319 * sparc-opc.c: New file, moved from BFD.
5320 * Makefile.in (OFILES): Build it.
5322 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5324 * z8k-dis.c: fixed forward refferences of some declarations.
5326 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5328 * Makefile.in: get the name of the library right
5330 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5332 * z8k-dis.c: knows how to disassemble z8k stuff
5333 * z8k-opc.h: new file full of z8000 opcodes
5337 version-control: never