1 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
3 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
4 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
7 1999-12-30 Andrew Haley <aph@cygnus.com>
9 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
11 * mips-opc.c (G6): New define.
12 (mips_builtin_op): Add "move" definition for -gp32.
14 2000-02-22 Ian Lance Taylor <ian@zembu.com>
16 From Grant Erickson <gerickso@Brocade.COM>:
17 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
19 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
21 * dis-buf.c (buffer_read_memory): Change `length' param and all int
24 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
26 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
27 (print_insn_ppi): Likewise.
28 (print_insn_shx): Use info->mach to select appropriate insn set.
29 Add support for sh-dsp. Remove FD_REG_N support.
30 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
31 (sh_arg_type): Likewise. Remove FD_REG_N.
32 (sh_dsp_reg_nums): New enum.
33 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
34 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
35 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
36 (arch_sh3_dsp_up): Likewise.
37 (sh_opcode_info): New field: arch.
38 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
39 D_REG_N. Fill in arch field. Add sh-dsp insns.
41 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
43 * arm-dis.c: Change flavor name from atpcs-special to
44 special-atpcs to prevent name conflict in gdb.
45 (get_arm_regname_num_options, set_arm_regname_option,
46 get_arm_regnames): New functions. API to access the several
47 flavor of register names. Note: Used by gdb.
48 (print_insn_thumb): Use the register name entry from the currently
49 selected flavor for LR and PC.
51 2000-02-10 Nick Clifton <nickc@cygnus.com>
53 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
55 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
56 "mulsh.h" instructions.
57 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
59 (print_insn_mcore): Add support for little endian targets.
60 Add support for MULSH and OPSR classes.
62 2000-02-07 Nick Clifton <nickc@cygnus.com>
64 * arm-dis.c (parse_arm_diassembler_option): Rename again.
65 Previous delat did not take.
67 2000-02-03 Timothy Wall <twall@redhat.com>
69 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
70 to adjust target address bounds checking and calculate the
71 appropriate octet offset into data.
73 2000-01-27 Nick Clifton <nickc@redhat.com>
75 * arm-dis.c: (parse_disassembler_option): Rename to
76 parse_arm_disassembler_option and allow to be exported.
78 * disassemble.c (disassembler_usage): New function: Print out any
79 target specific disassembler options.
80 Call arm_disassembler_options() if the ARM architecture is being
83 * arm-dis.c (NUM_ELEM): Define this macro if not already
85 (arm_regname): New struct type for ARM register names.
86 (arm_toggle_regnames): Delete.
87 (parse_disassembler_option): Use register name structure.
88 (print_insn): New function: Combines duplicate code found in
89 print_insn_big_arm and print_insn_little_arm.
90 (print_insn_big_arm): Call print_insn.
91 (print_insn_little_arm): Call print_insn.
92 (print_arm_disassembler_options): Display list of supported,
93 ARM specific disassembler options.
95 2000-01-27 Thomas de Lellis <tdel@windriver.com>
97 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
98 ARM_STT_16BIT flag as Thumb code symbols.
100 * arm-dis.c (printf_insn_little_arm): Ditto.
102 2000-01-25 Thomas de Lellis <tdel@windriver.com>
104 * arm-dis.c (printf_insn_thumb): Prevent double dumping
105 of raw thumb instructions.
107 2000-01-20 Nick Clifton <nickc@cygnus.com>
109 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
111 2000-01-03 Nick Clifton <nickc@cygnus.com>
113 * arm-dis.c (streq): New macro.
115 (force_thumb): ew local variable.
116 (parse_disassembler_option): New function: Parse a single, ARM
117 specific disassembler command line switch.
118 (parse_disassembler_option): Call parse_disassembler_option to
119 parse individual command line switches.
120 (print_insn_big_arm): Check force_thumb.
121 (print_insn_little_arm): Check force_thumb.
123 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
125 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
127 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
129 * m10300-opc.c, m10300-dis.c: Add am33 support.
131 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
133 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
134 (print_insn_hppa): Handle 'B' operand.
136 1999-11-22 Nick Clifton <nickc@cygnus.com>
138 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
140 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
142 * mips-opc.c (I5): New.
143 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
144 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
145 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
147 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
149 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
150 * arm-opc.h (print_insn_arm): Added comment documenting
151 the 'X' format just added to arm-dis.c.
153 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
155 * mips-opc.c (la): Create a version that just uses addiu directly.
156 (dla): Expand to daddiu if possible.
158 1999-11-11 Nick Clifton <nickc@cygnus.com>
160 * mips-opc.c: Add ssnop pattern.
162 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
164 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
166 1999-10-29 Nick Clifton <nickc@cygnus.com>
168 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
169 (d30v_format_tab): Define the SHORT_AR format.
171 1999-10-28 Nick Clifton <nickc@cygnus.com>
173 * mcore-dis.c: Remove spurious code introduced in previous delta.
175 1999-10-27 Scott Bambrough <scottb@netwinder.org>
177 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
179 1999-10-18 Michael Meissner <meissner@cygnus.com>
181 * alpha-opc.c (alpha_operands): Fill in missing initializer.
182 (alpha_num_operands): Convert to unsigned.
183 (alpha_num_opcodes): Ditto.
184 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
189 (extract_bdisp): Ditto.
190 (extract_jhint): Ditto.
191 (extract_ev6hwjhint): Ditto.
193 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
195 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
198 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
200 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
202 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
204 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
205 rac/rachi instructions.
206 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
209 1999-10-04 Doug Evans <devans@casey.cygnus.com>
211 * fr30-asm.c,fr30-desc.h: Rebuild.
212 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
213 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
215 1999-09-29 Nick Clifton <nickc@cygnus.com>
217 * sh-opc.h: Fix bit patterns for several load and store
220 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
222 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
223 cleaner code using completer prefixes. Add 'Y'.
225 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
227 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
229 * hppa-dis.c (extract_22): New function.
231 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
233 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
235 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
237 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
239 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
241 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
243 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
245 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
247 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
249 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
251 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
253 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
256 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
258 * hppa-dis.c: (print_insn_hppa): Add missing break after
261 * hppa-dis.c: Finish constifying various completers, register
264 1999-09-14 Michael Meissner <meissner@cygnus.com>
266 * configure.in (Canonicalization of target names): Remove adding
267 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
268 generates $ac_config_sub with a ${CONFIG_SHELL} already.
269 * configure: Regenerate.
271 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
273 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
275 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
277 1999-09-07 Nick Clifton <nickc@cygnus.com>
279 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
280 names for the mulu and muls patterns.
282 1999-09-04 Steve Chamberlain <sac@pobox.com>
284 * pj-opc.c: New file.
285 * pj-dis.c: New file.
286 * disassemble.c (disassembler): Handle bfd_arch_pj.
287 * configure.in: Handle bfd_pj_arch.
288 * Makefile.am: Rebuild dependencies.
289 (CFILES): Add pj-dis.c and pj-opc.c.
290 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
291 * configure, Makefile.in: Rebuild.
293 1999-09-04 H.J. Lu <hjl@gnu.org>
295 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
297 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
299 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
301 1999-08-04 Doug Evans <devans@casey.cygnus.com>
303 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
304 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
305 * m32r-opinst.c: Rebuild.
307 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
309 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
310 register args by 'f'.
312 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
314 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
315 extract_10U_store): New.
316 (print_insn_hppa): Add new completers.
318 * hppa-dis.c (signed_unsigned_names,mix_half_names,
319 saturation_names): New.
320 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
322 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
324 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
326 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
327 to decide to print a space.
329 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
331 * i386-dis.c: Add AMD athlon instruction support.
333 1999-08-10 Ian Lance Taylor <ian@zembu.com>
335 From Wally Iimura <iimura@microunity.com>:
336 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
337 overflow at end of address space.
338 (generic_print_address): Use sprintf_vma.
340 1999-08-08 Ian Lance Taylor <ian@zembu.com>
342 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
343 MKDEP. Rebuild dependencies.
344 * Makefile.in: Rebuild.
346 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
348 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
349 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
350 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
351 (print_insn_hppa): Add 64 bit condition completers.
353 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
355 * hppa-dis.c (print_insn_hppa): Change condition args to use
358 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
360 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
363 1999-07-21 Ian Lance Taylor <ian@zembu.com>
366 * configure.bat: Remove; obsolete.
368 1999-07-11 Ian Lance Taylor <ian@zembu.com>
370 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
371 (generic_strcat_address): Add cast to avoid warning.
372 * i386-dis.c: Initialize all structure fields to avoid warnings.
373 Add ATTRIBUTE_UNUSED as appropriate.
375 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
377 * sparc-dis.c (print_insn_sparc): Differentiate between
378 addition and oring when guessing symbol for comment.
380 1999-07-05 Nick Clifton <nickc@cygnus.com>
382 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
385 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
387 * i386-dis.c: Mention intel mode specials in macro char comment.
389 1999-06-21 Ian Lance Taylor <ian@zembu.com>
391 * alpha-dis.c: Don't include <stdlib.h>.
392 * arm-dis.c: Include "sysdep.h".
393 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
395 * Makefile.am: Rebuild dependencies.
396 * Makefile.in: Rebuild.
398 1999-06-16 Nick Clifton <nickc@cygnus.com>
400 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
403 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
405 * arm-dis.c (arm_regnames): Turn into a pointer to a register
407 (arm_regnames_standard): New variable: Array of ARM register
408 names according to ARM instruction set nomenclature.
409 (arm_regnames_apcs): New variable: Array of ARM register names
410 according to ARM Procedure Call Standard.
411 (arm_regnames_raw): New variable: Array of ARM register names
412 using just 'r' and the register number.
413 (arm_toggle_regnames): New function: Toggle the chosen register set
415 (parse_disassembler_options): New function: Parse any target
416 disassembler command line options.
417 (print_insn_big_arm): Call parse_disassembler_options if any
419 (print_insn_little_arm): Call parse_disassembler_options if any
422 1999-06-13 Ian Lance Taylor <ian@zembu.com>
424 * i386-dis.c (FWAIT_OPCODE): Define.
425 (used_prefixes): New static variable.
426 (fetch_data): Don't print an error message if we have already
427 fetched some bytes successfully.
428 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
429 (prefix_name): New static function.
430 (print_insn_i386): If setjmp fails, indicating a data error, but
431 we have managed to fetch some bytes, print the first one as a
432 prefix or a .byte pseudo-op. If fwait is followed by a non
433 floating point instruction, print the first prefix. Set
434 used_prefixes when prefixes are used. If any prefixes were not
435 used after disassembling the instruction, print the first prefix
436 instead of printing the instruction.
437 (putop): Set used_prefixes when prefixes are used.
438 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
439 (OP_DIR, OP_SIMD_Suffix): Likewise.
441 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
443 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
444 Support signx %reg, clruw %reg.
446 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
448 * sparc-opc.c: Add aliases Solaris as supports.
450 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
452 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
453 * Makefile.in: Regenerated.
455 1999-06-03 Philip Blundell <philb@gnu.org>
457 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
458 when target is PC-relative.
460 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
462 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
465 * m68k-dis.c (fetch_arg): Add places `n', `o'.
467 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
468 Add mcf5206e to appropriate instructions.
469 Add alias for MAC, MSAC.
471 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
474 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
475 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
477 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
479 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
481 * i386-dis.c (Ed): Define.
482 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
484 (OP_rm): Rename to OP_Rd.
487 (putop): Add const to template and p.
488 (print_insn_x86): Delete.
489 (print_insn_i386): Merge old function print_insn_x86. Add const
491 (struct dis386): Add const to name.
492 (dis386_att, dis386_intel): Add const.
493 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
494 (names32, names16, names8, names_seg, index16): Add const.
495 (grps, prefix_user_table, float_reg): Add const.
496 (float_mem_att, float_mem_intel): Add const.
497 (oappend): Add const to s.
498 (OP_REG): Add const to s.
499 (ptr_reg): Add const to s.
500 (dofloat): Add const to dp.
501 (OP_C): Don't skip modrm, it's now done in OP_Rd.
504 (OP_Rd): Check for valid mod. Call Op_E to print.
505 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
506 (OP_MS): Check for valid mod. Call Op_EM to print.
507 (OP_3DNowSuffix): Set obufp and use oappend rather than
508 strcat. Call BadOp() for errors.
509 (OP_SIMD_Suffix): Likewise.
510 (BadOp): New function.
512 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
514 * i386-dis.c (dis386_intel): Remove macro chars, except for
515 jEcxz. Change cWtR and cRtd to cW and cR.
516 (dis386_twobyte_intel): Remove macro chars here too.
517 (putop): Handle R and W macros for intel mode.
519 * i386-dis.c (SIMD_Fixup): New function.
520 (dis386_twobyte_att): Use it on movlps and movhps, and change
521 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
522 (dis386_twobyte_intel): Same here.
524 * i386-dis.c (Av): Remove.
528 (OP_SIMD_Suffix): New function.
529 (OP_DIR): Remove dead code.
530 (eAX_reg..eDI_reg): Renumber.
531 (onebyte_has_modrm): Table numbering comments.
532 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
533 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
534 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
535 and handle SIMD cmp insns in OP_SIMD_Suffix.
536 (info->bytes_per_line): Bump from 5 to 6.
538 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
539 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
541 PIII SIMD support from Doug Ledford <dledford@redhat.com>
542 * i386-dis.c (XM, EX, None): Define.
543 (OP_XMM, OP_EX, OP_None): New functions.
544 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
545 (GRP14): Rename to GRPAMD.
546 (GRP*): Add USE_GROUPS flag.
548 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
549 (twobyte_has_modrm): Add SIMD entries.
550 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
551 (grps): Add SIMD insns.
552 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
553 oappend repz if uses_f3_prefix. Add code to handle new groups for
556 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
557 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
558 operand from Av to Jv.
560 1999-05-07 Nick Clifton <nickc@cygnus.com>
562 * mcore-dis.c (print_insn_mcore): Use .short to display
563 unidentified instructions, not .word.
565 1999-04-26 Tom Tromey <tromey@cygnus.com>
567 * aclocal.m4, configure: Updated for new version of libtool.
569 1999-04-14 Doug Evans <devans@casey.cygnus.com>
571 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
572 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
574 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
576 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
579 1999-04-10 Doug Evans <devans@casey.cygnus.com>
581 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
582 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
584 1999-04-06 Ian Lance Taylor <ian@zembu.com>
586 * opintl.h (LC_MESSAGES): Never define.
588 1999-04-04 Ian Lance Taylor <ian@zembu.com>
590 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
591 (separator_char, scale_char): Likewise.
592 (print_insn_x86): Likewise.
593 (print_insn_i386): Likewise. Add declaration.
595 1999-03-26 Doug Evans <devans@casey.cygnus.com>
597 * fr30-dis.c: Rebuild.
598 * m32r-dis.c: Rebuild.
600 1999-03-23 Ian Lance Taylor <ian@zembu.com>
602 * m68k-opc.c: Change compare instructions to use "@s" rather than
603 ";s" when used with an immediate operand.
605 1999-03-22 Doug Evans <devans@casey.cygnus.com>
607 * cgen-opc.c (cgen_set_cpu): Delete.
608 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
609 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
611 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
613 * po/opcodes.pot: Rebuild.
615 1999-03-16 Martin Hunt <hunt@cygnus.com>
617 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
619 1999-03-11 Doug Evans <devans@casey.cygnus.com>
621 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
622 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
623 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
624 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
625 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
626 * m32r-opinst.c: Rebuild.
628 1999-02-25 Doug Evans <devans@casey.cygnus.com>
630 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
631 (cgen_hw_lookup_by_num): Rewrite.
632 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
633 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
634 * m32r-opinst.c: Rebuild.
636 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
638 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
639 (insert_jhint): Fix insertion mask.
640 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
642 1999-02-10 Doug Evans <devans@casey.cygnus.com>
644 * Makefile.in: Rebuild.
646 1999-02-09 Doug Evans <devans@casey.cygnus.com>
648 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
649 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
650 * Makefile.am: Remove references to them.
651 (HFILES): Add fr30-desc.h,m32r-desc.h.
652 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
654 (ALL_MACHINES): Update.
655 * configure.in: Redo handling of cgen_files.
656 (bfd_i960_arch): Delete i960c-*.lo files.
657 * configure: Regenerate.
658 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
659 (hash_insn_array): Rewrite.
660 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
661 (hash_insn_array): Rewrite.
662 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
663 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
664 (cgen_lookup_get_insn_operands): Ditto.
665 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
666 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
667 * po/POTFILES.in: Rebuild.
668 * po/opcodes.pot: Rebuild.
670 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
672 * Makefile.am: Rebuild dependencies.
673 (HFILES): Add fr30-opc.h.
674 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
675 * Makefile.in: Rebuild.
677 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
678 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
680 * acconfig.h: Remove.
681 * configure: Rebuild with current autoconf/automake.
682 * aclocal.m4: Likewise.
683 * config.in: Likewise.
684 * Makefile.in: Likewise.
686 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
688 * m68k-opc.c: Correct move (not movew) to status word on 5200.
690 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
692 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
693 * i386-dis.c (x_mode): Define.
697 (dis386_twobyte): Remove.
698 (dis386_twobyte_att): New.
699 (dis386_twobyte_intel): New.
700 (print_insn_x86): Use new arrays.
702 (float_mem_intel): New.
703 (float_mem_att): New.
704 (dofloat): Use new float_mem arrays.
705 (print_insn_i386_att): New.
706 (print_insn_i386_intel): New.
707 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
708 (putop): Handle intel syntax.
709 (OP_indirE): Handle intel syntax.
710 (OP_E): Handle intel syntax.
711 (OP_I): Handle intel syntax.
712 (OP_sI): Handle intel syntax.
713 (OP_OFF): Handle intel syntax.
717 1999-01-27 Doug Evans <devans@casey.cygnus.com>
719 * fr30-opc.h,fr30-opc.c: Rebuild.
720 * i960c-opc.h,i960c-opc.c: Rebuild.
721 * m32r-opc.c: Rebuild.
723 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
725 * hppa-dis.c: revert HP merge changes until HP gives us
728 1999-01-19 Nick Clifton <nickc@cygnus.com>
730 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
731 offsets as well as symbloic address.
733 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
735 * hppa-dis.c: fix comments and some indentation.
737 1999-01-12 Doug Evans <devans@casey.cygnus.com>
739 * fr30-opc.c,i960c-opc.c: Regenerate.
741 1999-01-11 Doug Evans <devans@casey.cygnus.com>
743 * fr30-opc.c: Regenerate.
745 1999-01-06 Doug Evans <devans@casey.cygnus.com>
747 * m32r-dis.c: Regenerate.
749 1999-01-05 Doug Evans <devans@casey.cygnus.com>
751 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
752 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
753 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
755 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
757 * configure.in: Require autoconf 2.12.1 or higher.
759 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
761 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
763 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
765 * fr30-opc.c: Regenerated.
767 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
769 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
771 1998-12-15 Dave Brolley <brolley@cygnus.com>
773 * fr30-opc.c,fr30-opc.h: Regenerated.
775 1998-12-14 Dave Brolley <brolley@cygnus.com>
777 * fr30-opc.c,fr30-opc.h: Regenerated.
779 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
781 * fr30-opc.c,fr30-opc.h: Regenerated.
783 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
785 * m32r-opc.c: Regenerate.
787 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
789 * dis-buf.c (generic_strcat_address): reformat to GNU coding
790 conventions. change sprintf call to an sprintf_vma call.
792 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
794 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
796 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
798 The following changes were made by
799 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
800 David Taylor <taylor@texas.cygnus.com>, and
801 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
802 merge in changes by HP; HP did not create ChangeLog entries.
804 * dis-buf.c (generic_strcat_address): new function.
806 * hppa-dis.c: Changes to improve hppa disassembly.
807 Changed formatting in : reg_names, fp_reg_names,control_reg,
808 New variables : sign_extension_names, deposit_names, conversion_names
809 float_test_names, compare_cond_names_double, add_cond_names_double,
810 logical_cond_names_double, unit_cond_names_double,
811 branch_push_pop_names, saturation_names, shift_names, mix_names,
812 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
813 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
814 (fput_const): renamed as fput_hex_const
816 - use the macros fputs_filtered and
817 fput_decimal_const whenever possible; calls to sign_extend require
818 2 params -- add a missing second param of 0.
819 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
820 architecture version number of current machine. HP folks are
821 trying to handle situation where the target program was compiled
822 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
824 - added new cases : 'g', 'B', 'm'
825 - added cases specifically for PA 2.0
826 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
827 - calls to fput_const become calls to fput_hex_const
829 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
831 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
832 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
833 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
834 * Makefile.in: Rebuilt.
835 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
837 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
838 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
840 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
842 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
844 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
846 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
848 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
849 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
851 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
853 * fr30-opc.c: Regenerate.
855 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
857 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
859 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
861 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
863 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
865 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
867 1998-11-30 Doug Evans <devans@casey.cygnus.com>
869 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
870 CGEN_INSN_BASE_VALUE.
871 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
872 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
874 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
876 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
878 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
880 * fr30-asm.c,fr30-dis.c: Regenerated.
882 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
884 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
886 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
888 * fr30-opc.c: Regenerated.
890 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
892 * fr30-opc.c: Regenerated.
893 * fr30-opc.h: Regenerated.
894 * fr30-dis.c: Regenerated.
895 * fr30-asm.c: Regenerated.
897 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
899 * mips-opc.c (sync.p,sync.l): Swap insn values.
901 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
903 * fr30-opc.c: Regenerate.
905 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
907 * fr30-opc.c: Regenerated.
908 * fr30-opc.h: Regenerated.
910 1998-11-18 Doug Evans <devans@casey.cygnus.com>
912 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
913 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
915 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
917 * fr30-opc.c: Regenerated.
919 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
921 * fr30-opc.c: Regenerated.
922 * fr30-opc.h: Regenerated.
923 * fr30-dis.c: Regenerated.
924 * fr30-asm.c: Regenerated.
926 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
928 * po/opcodes.pot: Regenerated.
929 * fr30-opc.c: Regenerated.
930 * fr30-opc.h: Regenerated.
931 * fr30-dis.c: Regenerated.
932 * fr30-asm.c: Regenerated.
934 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
936 * disassemble.c (disassembler): Add support for FR30 target.
938 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
940 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
941 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
943 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
945 * po/opcodes.pot: Regenerate.
946 * po/POTFILES.in: Regenerate.
947 * fr30-opc.c: Regenerate.
948 * fr30-opc.h: Regenerate.
950 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
952 * m32r-asm.c: Regenerate.
954 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
956 * configure.in: Added case for bfd_fr30_arch.
957 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
958 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
959 (CLEANFILES): Added stamp-fr30.
961 * fr30-asm.c: New file.
962 * fr30-dis.c: New file.
963 * fr30-opc.c: New file.
964 * fr30-opc.h: New file.
965 * po/POTFILES.in: Regenerated
966 * po/opcodes.pot: Regenerated
968 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
970 * configure.in: detect cygwin* instead of cygwin32*
971 * configure: regenerate
973 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
975 * mips-opc.c (IS_M): Added.
977 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
979 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
981 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
983 * m32r-opc.h,m32r-opc.c: Regenerate.
985 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
987 * i386-dis.c (OP_3DNowSuffix): New static function.
990 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
991 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
992 (insn_codep): New static variable.
993 (print_insn_x86): Init insn_codep after prefixes.
994 (grps): Add GRP14 entries for prefetch, prefetchw.
997 From Jeff B Epler <jepler@usgs.gov>
998 * i386-dis.c (Suffix3DNow): New table.
1000 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1002 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1004 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1006 * d10v-dis.c (print_operand): If num is nonzero, then
1007 add OPERAND_ACC1, not OPERAND_ACC0.
1009 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1011 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1014 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1016 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1019 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1021 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1023 1998-09-09 Michael Meissner <meissner@cygnus.com>
1025 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1028 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1030 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1032 (print_insn_little_arm): Detect Thumb symbols in elf object
1035 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1037 * alpha-dis.c (print_insn_alpha): Use the machine type to
1038 decide which PALcode set to include.
1040 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1042 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1044 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1046 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1047 MSUB and MSUBS instructions.
1049 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1051 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1052 operand name macros.
1054 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1056 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1057 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1058 +, -, and d for ColdFire.
1060 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1061 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1062 (extract_mbe): Likewise.
1064 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1066 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1068 * m10300-opc.c: First cut at UDF instructions.
1070 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1072 * m32r-opc.c: Regenerate (remove semantic descriptions).
1074 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1076 * arm-dis.c (print_insn_big_arm): Fix indentation.
1077 (print_insn_little_arm): Likewise.
1079 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1081 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1083 (print_insn_little_arm): Likewise.
1085 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1087 Move all global state data into opcode table struct, and treat
1088 opcode table as something that is "opened/closed".
1089 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1090 (cgen_asm_init): Delete.
1091 (cgen_set_parse_operand_fn): New function.
1092 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1093 (cgen_dis_init): Delete.
1094 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1095 (cgen_current_{opcode_table_mach,endian}): Delete.
1096 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1098 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1100 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1103 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1105 * m10300-opc.c: Add entries for "no_match_operands" field in
1108 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1110 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1112 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1114 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1116 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1118 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1120 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1122 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1123 will be masked later.
1125 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1127 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1129 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1131 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1133 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1135 * m10300-dis.c: Only recognize instructions from the currently
1137 * m10300-opc.c: Add field indicating the particular variant of
1138 the mn10300 each instruction is available on.
1140 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1142 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1143 * Makefile.am: Rebuild dependencies.
1144 (CFILES): Add vax-dis.c.
1145 (ALL_MACHINES): Add vax-dis.lo.
1146 * aclocal.m4: Rebuild with current libtool.
1147 * configure, Makefile.in: Rebuild.
1149 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1151 * vax-dis.c: New file, from work by Pauline Middelink
1152 <middelin@polyware.iaf.nl>.
1153 * disassemble.c (ARCH_vax): Define if ARCH_all.
1154 (disassembler): Add case for ARCH_vax.
1155 * makefile.vms: Support compilation on vms/vax.
1157 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1159 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1160 related to sign extension and the size of ints.
1162 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1164 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1165 instructions. Support (sp) addressing mode by expanding it into
1168 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1170 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1172 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1174 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1176 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1178 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1181 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1183 * mips-dis.c (print_insn_little_mips): Previously, instruction
1184 printing references the symbol table to determine whether the
1185 instruction resides in a block regular instructions or mips16
1186 instructions. However, when the disassembler gets used in other
1187 environments where the symbol table is not present, we no longer
1188 rely in the symbol table, rather, use the low bit of the
1189 instructions address to guess. There should be no change for usage
1190 of the disassembler in host based programs, gdb, objdump.
1191 (print_insn_big_mips): ditto.
1192 (print_insn_mips): ditto
1194 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1196 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1198 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1200 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1202 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1204 * i386-dis.c (index16): Add '%' to register names. Use ','
1207 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1209 * i386-dis.c: Don't print opcode suffix when we can figure out the
1210 size (and gas can!) by register operands, or from the default
1212 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1214 (dis386, dis386_twobyte, grps): Use new suffix macros.
1215 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1216 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1217 order of cmps operands to agree with Intel docs. Correct operand
1218 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1219 agree with Intel docs.
1220 (print_insn_x86): Print orphan fwait before other prefixes.
1221 Return correct byte count for orphan fwait with prefixes. Don't
1222 print `bound' operands in reverse order.
1223 (ckprefix): Stop accumulating prefixes if we get fwait.
1224 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1226 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1228 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1229 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1231 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1233 Fix problems when bfd_vma is wider than long.
1234 * i386-dis.c: Make op_address and start_pc unsigned.
1235 (set_op): Make parameter unsigned.
1236 (print_insn_x86): Cast to bfd_vma when passing a value to
1238 * ns32k-dis.c (CORE_ADDR): Don't define.
1239 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1240 bfd_scan_vma to read back address.
1241 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1243 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1244 (NEXTULONG): New definition.
1245 (print_insn_m68k): Avoid overflow when computing third argument of
1247 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1248 Use disp instead of val to store offset values.
1249 (print_indexed): Use base_disp instead of word to store base
1250 displacement, to avoid overflow.
1251 * m10300-dis.c (disassemble): Cast value to long when computing
1252 pc-relative address, to get correct sign extension.
1254 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1256 * m32r-opc.c: Regenerate.
1258 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1260 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1261 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1263 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1265 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1267 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1269 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1271 (OP_DSreg): Rename from OP_DSSI.
1272 (OP_ESreg): Rename from OP_ESDI.
1273 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1275 (append_seg): Rename from append_prefix.
1276 (ptr_reg): New function.
1277 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1279 (PREFIX_ADDR): Rename from PREFIX_ADR.
1280 (float_reg): Add non-broken opcodes for people who don't want
1283 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1285 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1288 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1290 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1292 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1294 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1295 0; produce error message for shifts of size 32 (or 64 for 64-bit
1296 shifts), because the hardware doesn't support them.
1298 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1300 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1301 LONG_2, LONG_2b formats to use this new operand.
1303 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1305 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1307 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1309 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1310 endian data support.
1312 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1314 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1315 and SHORT_B3b formats to use Rb instead of Ra.
1317 Add FLAG_MUL16 to MUL2XH opcode.
1319 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1320 to existing 1.1.1 parallelisation prohibition procedure.
1322 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1324 * m32r-asm.c,m32r-dis.c: Regenerate.
1326 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1328 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1329 with a shift count of 0.
1331 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1333 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1334 (cgen_hw_lookup_by_num): New function.
1336 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1338 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1340 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1342 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1343 as big-endian on SPARClite.
1345 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1347 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1349 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1351 * po/Make-in (install-info): New target.
1353 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1355 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1356 * configure: Rebuild.
1358 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1360 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1361 variety of ISA2 instructions to set bottom ten bits of trap code.
1363 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1365 * Makefile.am (config.status): Add explicit target so that
1366 config.status depends upon bfd/configure.in.
1367 * Makefile.in: Rebuild.
1369 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1371 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1372 instructions to set bottom ten bits of break code.
1373 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1374 for above optional argument.
1376 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1378 * makefile.vms: Run dec c with /nodebug.
1380 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1382 * Makefile.in: Rebuilt.
1383 * Makefile.am: Regenerated dependencies with mkdep.
1385 * opintl.h (_): Define as dgettext.
1387 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1389 * cgen-asm.c: Internationalised.
1390 * m32r-asm.c: Internationalised.
1391 * m32r-dis.c: Internationalised.
1392 * m32r-opc.c: Internationalised.
1394 * aclocal.m4: Regenerated.
1395 * configure: Regenerated.
1396 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1397 * Makefile.in: Rebuild.
1398 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1399 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1401 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1403 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1405 * aclocal.m4, configure: Rebuild with current tools.
1407 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1409 * opintl.h: New file - contains internationalisation macros used
1410 by source files in this directory.
1411 * po/: New subdirectory - contains internationalisation files.
1412 * po/Make-in: New file - Makefile constructor.
1413 * po/POTFILES.in: New file - list of files in opcodes directory
1414 that should be scan for internationalisation macros.
1415 * po/opcodes.pot: New file - list of internationisation strings
1416 found in files mentioned in po/POTFILES.in.
1417 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1418 entry. Add intl directory to include paths.
1419 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1420 HAVE_STRCPY, HAVE_LC_MESSAGES
1421 * configure.in: Add rule to build Makefile in po subdirectory.
1422 * Makefile.in: Rebuilt.
1423 * aclocal.m4: Rebuilt.
1424 * config.in: Rebuilt.
1425 * configure: Rebuilt.
1426 * alpha-opc.c: Internationalised.
1427 * arc-dis.c: Internationalised.
1428 * arc-opc.c: Internationalised.
1429 * arm-dis.c: Internationalised.
1430 * cgen-asm.c: Internationalised.
1431 * d30v-dis.c: Internationalised.
1432 * dis-buf.c: Internationalised.
1433 * h8300-dis.c: Internationalised.
1434 * h8500-dis.c: Internationalised.
1435 * i386-dis.c: Internationalised.
1436 * m10200-dis.c: Internationalised.
1437 * m10300-dis.c: Internationalised.
1438 * m68k-dis.c: Internationalised.
1439 * m88k-dis.c: Internationalised.
1440 * mips-dis.c: Internationalised.
1441 * ns32k-dis.c: Internationalised.
1442 * opintl.h: Internationalised.
1443 * ppc-opc.c: Internationalised.
1444 * sparc-dis.c: Internationalised.
1445 * v850-dis.c: Internationalised.
1446 * v850-opc.c: Internationalised.
1448 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1450 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1451 (asm_hash_table_entries): New variable.
1452 (cgen_asm_init): Free asm_hash_table_entries.
1453 (hash_insn_array,hash_insn_list): New functions.
1454 (build_asm_hash_table): Use them. Hash macro insns as well.
1455 (cgen_asm_lookup_insn): Update.
1456 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1457 (dis_hash_table_entries): New variable.
1458 (cgen_dis_init): Free dis_hash_table_entries.
1459 (hash_insn_array,hash_insn_list): New functions.
1460 (build_dis_hash_table): Use them. Hash macro insns as well.
1461 (cgen_dis_lookup_insn): Update.
1462 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1463 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1464 (cgen_macro_insn_count): New function.
1465 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1467 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1469 * i386-dis.c (OP_DSSI): Print segment override.
1471 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1473 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1476 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1478 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1479 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1480 * configure.in: Define and substitute WIN32LDFLAGS and
1482 * aclocal.m4: Rebuild with new libtool.
1483 * configure, Makefile.in: Rebuild.
1485 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1487 * m32r-opc.c: Regenerate.
1489 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1491 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1492 before trying to copy it.
1493 * Makefile.in: Rebuild.
1495 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1497 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1499 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1501 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1502 from an arbitrary valid buffer instead of fetching them on demand
1504 (invalid_float): use bit_extract_simple() instead of bit_extract().
1506 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1508 From H.J. Lu <hjl@gnu.org>:
1509 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1512 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1514 * Branched binutils 2.9.
1516 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1518 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1519 disassembling last 4 bytes of a section.
1521 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1523 Fix some gcc -Wall warnings:
1524 * arc-dis.c (print_insn): Add casts to avoid warnings.
1525 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1526 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1527 * m10200-dis.c (disassemble): Likewise.
1528 * m10300-dis.c (disassemble): Likewise.
1529 * ns32k-dis.c (print_insn_ns32k): Likewise.
1530 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1531 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1532 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1533 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1534 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1535 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1536 * tic80-dis.c (print_one_instruction): Likewise.
1537 * w65-dis.c (print_operand): Likewise.
1538 * z8k-dis.c (fetch_data): Likewise.
1539 * a29k-dis.c: Add return type for find_byte_func_type.
1540 * arc-opc.c: Include <stdio.h>. Remove declarations of
1541 insert_multshift and extract_multshift.
1542 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1544 (extract_value): Fully parenthesize expression.
1545 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1546 * h8500-opc.h (h8500_table): Fully bracket initializer.
1547 * w65-opc.h (optable): Likewise.
1548 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1549 * i386-dis.c (OP_E): Initialize local variables.
1550 * m10200-dis.c (print_insn_mn10200): Likewise.
1551 * mips-dis.c (print_insn_mips16): Likewise.
1552 * sh-dis.c (print_insn_shx): Likewise.
1553 * v850-dis.c (print_insn_v850): Likewise.
1554 * ns32k-dis.c (print_insn_arg): Declare.
1555 (get_displacement, invalid_float): Declare.
1556 (list_search, sign_extend, flip_bytes): Declare return type.
1557 (get_displacement): Likewise.
1558 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1560 (print_insn_ns32k): Make i unsigned.
1561 (invalid_float): Make static. Declare type of val.
1562 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1563 on each for iteration.
1564 * tic30-dis.c (get_indirect_operand): Likewise.
1565 * z8k-dis.c (print_insn_z8001): Declare return type.
1566 (print_insn_z8002): Likewise.
1567 (unparse_instr): Fix sprintf format strings.
1569 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1571 * mips-opc.c: Add "sync.l" and "sync.p".
1573 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1575 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1576 default m68k variant to recognize.
1578 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1579 (ctrl, cobr, mem, ea): Likewise.
1580 (print_addr): Likewise. Remove cast.
1581 (ea): Cast argument of print_addr to bfd_vma.
1583 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1585 (cgen_parse_unsigned_integer): Likewise.
1586 (cgen_parse_address): Likewise.
1588 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1590 * i960-dis.c (ctrl): Add full braces to structure initialization.
1591 (cobr, mem, reg): Likewise.
1592 (ea): Correct parenthesization in expression.
1594 * cgen-asm.c: Include <ctype.h>.
1595 (build_asm_hash_table): Remove unused local variable i.
1596 (cgen_parse_keyword): Add casts to avoid warnings.
1598 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1599 symbol. Fix indentation.
1600 (print_insn_little_arm): Likewise.
1602 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1604 * configure.in: Use AM_DISABLE_SHARED.
1605 * aclocal.m4, configure: Rebuild with libtool 1.2.
1607 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1609 These patches are courtesy of Jonathan Walton and Tony Thompson
1610 (athompso@cambridge.arm.com).
1612 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1615 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1616 both the offset and the label closest to the destination.
1618 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1620 * m32r-opc.h: Regenerate.
1622 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1624 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1626 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1628 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1629 assume that info->symbols is non-empty.
1631 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1633 * alpha-opc.c (cvtqs) There is no such thing.
1634 (cvttq): Missing most of the /*d variants.
1636 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1638 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1639 delayed branches or jumps.
1641 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1643 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1645 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1646 * tic30-dis.c (print_branch): Likewise.
1648 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1650 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1651 saved_symbol code as it is no longer needed.
1653 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1655 * cgen-asm.c: Include symcat.h.
1656 * cgen-dis.c,cgen-opc.c: Ditto.
1657 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1659 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1661 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1663 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1665 * m32r-opc.[ch]: Regenerate.
1667 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1669 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1670 arguments. Don't perform validation here.
1671 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1673 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1675 * m32r-opc.c: Regenerate.
1677 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1679 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1680 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1682 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1684 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1686 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1688 * configure.in: Get the version number from BFD.
1689 * configure: Rebuild.
1691 From H.J. Lu <hjl@gnu.org>:
1692 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1693 * Makefile.in: Rebuild.
1695 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1697 * m32r-opc.c: Regenerate.
1698 * m32r-opc.h: Regenerate.
1700 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1702 * m32r-opc.c: Regenerate.
1704 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1706 Fix rac to accept only a0:
1707 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1708 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1709 Introduce OPERAND_GPR.
1710 * d10v-dis.c (print_operand): Likewise.
1712 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1714 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1715 (cgen_hw_lookup): Make result const.
1716 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1718 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1720 * configure, aclocal.m4: Rebuild with new libtool.
1722 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1724 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1725 instructions use a PC relative branch, not absolute.
1727 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1729 * configure.in: Set libtool_enable_shared rather than
1730 libtool_shared. Remove diversion hack.
1731 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1733 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1735 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1736 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1738 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1740 * tic30-dis.c: New file.
1741 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1742 * configure.in: Handle bfd_tic30_arch.
1743 * Makefile.am: Rebuild dependencies.
1744 (CFILES): Add tic30-dis.c
1745 (ALL_MACHINES): Add tic30-dis.lo.
1746 * configure, Makefile.in: Rebuild.
1748 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1750 * m32r-opc.h (HAVE_CPU_M32R): Define.
1752 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1754 * v850-opc.c (insertion routines): If both alignment and size is
1755 wrong then report this.
1757 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1759 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1760 Only recognize instructions for the current target_processor.
1762 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1764 * d10v-dis.c (PC_MASK): Correct value.
1765 (print_operand): If there's a reloc, don't calculate the
1766 address because they could be in different sections.
1768 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1770 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1771 instruction after the 4650's "mul" instruction; nobody's using the
1772 4010 these days. If object files someday indicate which processor
1773 variant they're intended for, we can do a better job at this.
1775 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1777 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1778 table provided entry size. Use CGEN_INSN_MNEMONIC.
1779 (cgen_parse_keyword): Rewrite.
1780 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1781 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1782 * cgen-opc.c: Clean up pass over `struct foo' usage.
1783 (cgen_keyword_lookup_value): Handle "" entry.
1784 (cgen_keyword_add): Likewise.
1786 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1788 * mips-opc.c: Add FP_D to s.d instruction flags.
1790 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1792 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1794 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1796 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1797 PC relative offset forms before the 15 bit forms. An assembler command
1798 line option now chooses the default.
1800 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1802 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1803 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1805 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1807 * configure: Only build libopcodes shared if --enable-shared's value
1808 was `yes', or was set to `*opcodes*'.
1809 * aclocal.m4: Likewise.
1810 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1811 original source of this bit of code. It's not clear what the best fix
1814 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1816 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1817 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1818 offset forms before the 15 bit forms, to default to the long forms.
1820 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1822 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1824 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1826 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1827 symbol if none is present.
1828 (print_insn_big_arm): Prevent examination of stored symbol if
1831 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1833 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1835 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1837 * disassemble.c: Remove disasm_symaddr() function.
1839 * arm-dis.c: Use info->symbol instead of info->flags to determine
1840 if disassmbly should be in Thumb or Arm mode.
1842 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1844 * arm-dis.c: Add support for disassembling Thumb opcodes.
1845 (print_insn_thumb): New function.
1847 * disassemble.c (disasm_symaddr): New function.
1849 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1850 (thumb_opcodes): Table of Thumb opcodes.
1852 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1854 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1856 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1857 and 'v' as operand types.
1859 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1861 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1862 <olivier.carmona@di.epfl.ch>.
1863 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1864 which has a two word opcode with a one word argument.
1866 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1868 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1869 unsigned, not signed.
1870 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1872 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1874 * d10v-dis.c (print_operand):
1875 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1877 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1879 * d10v-opc.c (OPERAND_FLAG): Split into:
1880 (OPERAND_FFLAG, OPERAND_CFLAG) .
1884 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1886 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1887 field for all INSN_MACRO's.
1888 * mips16-opc.c: same
1890 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1892 * mips-opc.c (sync,cache): These are 3900 insns.
1894 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1896 sh-opc.h (sh_table): Remove ftst/nan.
1898 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1900 * mips-opc.c (ffc, ffs): Fix mask.
1902 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1904 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1907 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1909 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1910 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1912 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1914 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1915 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1917 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1919 * v850-dis.c (disassemble): Replace // with /* ... */
1921 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1923 * sparc-opc.c: Add wr & rd for v9a asr's.
1924 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1925 (v9a_asr_reg_names): New variable.
1926 Patch from David Miller <davem@vger.rutgers.edu>.
1928 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1930 * sparc-opc.c (v9notv9a): New insn type.
1931 (IMPDEP): Move to the end to not conflict with edge8 et al.
1932 Patch from David Miller <davem@vger.rutgers.edu>.
1934 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1936 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1938 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1940 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1942 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1944 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1945 of disassemble_info structure to determine if an overlay address
1946 has a matching symbol in low memory.
1948 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1949 new symbol_at_address_func field in disassemble_info structure.
1951 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1953 * v850-opc.c (extract_d22): Use signed arithmatic.
1955 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1957 * mips-opc.c: Three op mult is not an ISA insn.
1959 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1961 * mips-opc.c: Fix formatting.
1963 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1965 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1966 than assuming that char is signed. Explicitly sign extend 16 bit
1967 values, rather than assuming that short is 16 bits.
1968 (OP_sI, OP_J, OP_DIR): Likewise.
1970 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1972 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1975 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1977 * v850-opc.c: Fix typo in comment.
1979 * v850-dis.c (disassemble): Add test of processor type when
1980 determining opcodes.
1982 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1984 * configure.in: Use a diversion to set enable_shared before the
1985 arguments are parsed.
1986 * configure: Rebuild.
1988 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1990 * m68k-opc.c (TBL1): Use ! rather than `.
1991 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1993 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1995 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1997 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1999 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2002 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2003 * aclocal.m4: Rebuild with new libtool.
2004 * configure: Rebuild.
2006 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2008 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2010 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2012 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2014 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2016 * v850-opc.c (v850_opcodes): Further rearrangements.
2018 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2020 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2022 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2024 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2027 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2029 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2031 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2033 * v850-opc.c: Initialise processors field of v850_opcode structure.
2035 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2037 Merge changes from Martin Hunt:
2039 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2041 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2042 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2043 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2045 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2047 * d30v-dis.c (print_insn): First operand of d*i (delayed
2048 branch) instructions is relative.
2050 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2051 (d30v_operand_table): Add IMM6S3 type.
2052 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2054 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2055 and cmp instructions.
2057 * d30v-opc.c: Correct entries for repeat*, and sat*.
2058 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2059 types. Correct several formats.
2061 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2063 * d30v-opc.c (pre_defined_registers): Change control registers.
2065 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2066 SHORT_C2. Manual was incorrect.
2068 * d30v-dis.c (lookup_opcode): Return value now indicates
2069 if an opcode has a short and a long form. Used for deciding
2070 to append a ".s" or ".l".
2071 (print_insn): Append a ".s" to an instruction if it is
2072 the short form and ".l" if it is a long form. Do not append
2073 anything if the instruction has only one possible size.
2075 * d30v-opc.c: Change mulx2h to require an even register.
2076 New form: SHORT_A2; a SHORT_A form that needs an even
2077 register as the first operand.
2079 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2080 instruction was not being disassembled if there were an odd
2081 number of instructions.
2083 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2085 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2087 * v850-dis.c (disassemble): Improved display of register lists.
2089 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2092 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2093 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2094 fandnot1s, fandnot2s.
2096 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2098 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2100 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2102 * cgen-asm.c (cgen_parse_address): New argument resultp.
2103 All callers updated.
2104 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2106 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2108 * mn10200-dis.c (disassemble): PC relative instructions are
2109 relative to the next instruction, not the current instruction.
2111 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2113 * v850-dis.c (disassemble): Only signed extend values that are not
2114 returned by extract functions.
2115 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2117 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2119 * v850-opc.c: Update comments. Remove use of
2120 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2122 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2124 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2126 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2128 * configure: Rebuilt with latest devo autoconf for NT support.
2130 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2132 * v850-dis.c (disassemble): Use curly brace syntax for register
2135 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2136 where r0 is being used as a destination register.
2138 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2140 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2142 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2144 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2146 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2148 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2149 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2152 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2154 * configure (cgen_files): Add support for v850e target.
2155 * configure.in (cgen_files): Add support for v850e target.
2157 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2159 * configure (cgen_files): Add support for v850ea target.
2160 * configure.in (cgen_files): Add support for v850ea target.
2162 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2164 * configure.in (bfd_arc_arch): Add.
2165 * configure: Rebuild.
2166 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2167 * Makefile.in: Rebuild.
2168 * arc-dis.c, arc-opc.c: New files.
2169 * disassemble.c (ARCH_all): Define ARCH_arc.
2170 (disassembler): Add ARC support.
2172 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2174 * v850-dis.c (disassemble): Add support for v850EA instructions.
2176 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2177 (v850_opcodes): Add v850EA instructions.
2179 * v850-dis.c (disassemble): Add support for v850E instructions.
2181 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2182 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2183 insert_spe, extract_spe): New Functions.
2184 (v850_opcodes): Add v850E instructions.
2186 * v850-opc.c: Reorganised and re-layed out to improve readability
2189 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2191 * configure: Rebuild with autoconf 2.12.1.
2193 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * aclocal.m4, configure: Rebuild with new automake patches.
2197 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2200 * acinclude.m4: Just include acinclude.m4 from BFD.
2201 * aclocal.m4, configure: Rebuild.
2203 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2205 * Makefile.am: New file, based on old Makefile.in.
2206 * acconfig.h: New file.
2207 * acinclude.m4: New file.
2208 * stamp-h.in: New file.
2209 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2210 Removed shared library handling; now handled by libtool. Replace
2211 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2212 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2213 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2214 handling in AC_OUTPUT.
2215 * dep-in.sed: Change .o to .lo.
2216 * Makefile.in: Now built with automake.
2217 * aclocal.m4: Now built with aclocal.
2218 * config.in, configure: Rebuild.
2220 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2222 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2224 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2226 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2228 * sparc-dis.c (sorted_opcodes): New static local.
2229 (struct opcode_hash): `opcode' is pointer to const element.
2230 (build_hash): First arg is now table of sorted pointers.
2231 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2232 (compare_opcodes): Update.
2234 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2236 * cgen-opc.c: #include <ctype.h>.
2237 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2238 Handle case insensitive hashing.
2239 (hash_keyword_value): Change type of `value' to unsigned int.
2241 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2243 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2244 precision FP, mark it as such. Likewise for double precision
2245 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2248 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2250 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2252 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2253 nesting depth when all the macros are expanded.
2255 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2257 * sparc-opc.c: The fcmp v9a instructions take an integer register
2258 as a destination, not a floating point register. From Christian
2259 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2261 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2263 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2264 syntax. From Roman Hodek
2265 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2267 * i386-dis.c (twobyte_has_modrm): Fix pand.
2269 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2271 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2273 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2275 * arm-dis.c: Add prototypes for arm_decode_shift and
2278 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2280 * mips-opc.c: Add r3900 insns.
2282 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2284 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2285 print delay slot instructions on the same line. When using a PC
2286 relative load, add a comment with the value being loaded if it can
2289 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2291 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2292 to pushS/popS for segment regs and byte constant so that
2293 pushw/popw printed when in 16 bit data mode.
2295 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2296 print cbtw, cwtd in 16 bit data mode.
2297 * i386-dis.c (putop): extra case W to support above.
2299 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2300 address size prefix in 16 bit address mode.
2302 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2304 * sh-dis.c: Reindent. Rename local variable fprintf to
2307 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2309 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2311 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2313 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2315 * mips16-opc.c (mip16_opcodes): same.
2317 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2319 * m68k-opc.c (moveb): Change $d to %d.
2321 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2324 (twobyte_has_modrm): Likewise.
2326 (OP_MMX, OP_EM, OP_MS): New static functions.
2328 * i386-dis.c: Revert patch of April 4. The output now matches
2331 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2333 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2336 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2338 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2340 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2342 * Makefile.in (install): Depend upon installdirs.
2343 (installdirs): New target.
2345 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2347 From Thomas Graichen <graichen@rzpd.de>:
2348 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2349 * configure: Rebuild.
2351 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2353 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2354 Delete string{,s}.h support.
2356 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2358 * cgen-asm.c (cgen_parse_operand_fn): New global.
2359 (cgen_parse_{{,un}signed_integer,address}): Update call to
2360 cgen_parse_operand_fn.
2361 (cgen_init_parse_operand): New function.
2362 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2363 from cgen_asm_init_parse.
2364 (m32r_cgen_assemble_insn): New operand `errmsg'.
2365 Delete call to as_bad, return error message to caller.
2366 (m32r_cgen_asm_hash_keywords): #if 0 out.
2368 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2370 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2372 [case 'J']: Fix typo in register name.
2374 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2376 * configure.in: Substitute SHLIB_LIBS.
2377 * configure: Rebuild.
2378 * Makefile.in (SHLIB_LIBS): New variable.
2379 ($(SHLIB)): Use $(SHLIB_LIBS).
2381 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2383 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2385 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2387 * disassemble.c (disassembler): Handle m32r.
2389 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2391 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2392 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2393 * Makefile.in (CFILES): Add them.
2394 (ALL_MACHINES): Add them.
2395 (dependencies): Regenerate.
2396 * configure.in (cgen_files): New variable.
2397 (bfd_m32r_arch): Add entry.
2398 * configure: Regenerate.
2400 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2402 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2403 * configure: Rebuild.
2405 * Makefile.in: Rebuild dependencies.
2407 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2409 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2412 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2414 * Branched binutils 2.8.
2416 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2418 * m10200-dis.c: Rename from mn10200-dis.c.
2419 * m10200-opc.c: Rename from mn10200-opc.c.
2420 * m10300-dis.c: Rename from mn10300-dis.c
2421 * m10300-opc.c: Rename from mn10300-opc.c.
2422 * Makefile.in: Update accordingly.
2424 * mips16-opc.c: Add mul and dmul macros.
2426 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2428 * makefile.vms: Update CFLAGS, add clean target.
2430 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2432 * mips-opc.c: Add "wait". From Ralf Baechle
2433 <ralf@gnu.ai.mit.edu>.
2435 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2436 * configure, config.in: Rebuild.
2437 * sysdep.h: Include <stdlib.h> if it exists.
2438 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2440 * Makefile.in: Rebuild dependencies.
2442 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2444 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2445 Andrew Bray <andy@madhouse.demon.co.uk>.
2447 * mips-opc.c: Add cast when setting mips_opcodes.
2449 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2451 * v850-dis.c (disassemble): Fix sign extension problem.
2452 * v850-opc.c (extract_d*): Fix sign extension problems to make
2453 disassembly calculate branch offsets correctly.
2455 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2457 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2459 * mips-opc.c: Add dctr and dctw.
2461 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2463 * d30v-dis.c (print_insn): Change the way signed constants
2466 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2468 * Makefile.in (BFD_H): New variable.
2469 (HFILES): New variable.
2470 (CFILES): Add all C files.
2471 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2472 Delete old dependencies, and build new ones.
2473 * dep-in.sed: New file.
2475 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2477 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2479 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2481 * mn10200-opc.c: Change "trap" to "syscall".
2482 * mn10300-opc.c: Add new "syscall" instruction.
2484 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2486 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2487 mulul insns on the coldfire.
2489 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2491 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2492 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2493 (print_insn_little_arm): Likewise.
2495 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2497 Based on patches from H.J. Lu <hjl@lucon.org>:
2498 * i386-dis.c (fetch_data): Add prototype.
2499 * m68k-dis.c (fetch_data): Add prototype.
2500 (dummy_print_address): Add prototype. Make static.
2501 * ppc-opc.c (valid_bo): Add prototype.
2502 * sparc-dis.c (build_hash_table): Add prototype.
2503 (is_delayed_branch, compute_arch_mask): Add prototypes.
2504 (print_insn_sparc): Make several local variables const.
2505 (compare_opcodes): Change arguments to const PTR. Add prototype.
2506 * sparc-opc.c (arg): Change name field to be const.
2507 (lookup_name, lookup_value): Add prototypes. Change table and
2508 name parameters to be const.
2509 (sparc_encode_asi): Change name parameter to be const.
2510 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2511 (sparc_encode_sparclet_cpreg): Likewise.
2512 (sparc_decode_asi): Change return type to be const.
2513 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2514 (sparc_decode_sparclet_cpreg): Likewise.
2516 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2518 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2519 Solaris doesn't like the combined options, and the -f is
2521 (stamp-tshlink, install): Likewise.
2523 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2525 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2528 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2530 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2532 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2534 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2537 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2539 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2541 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2543 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2545 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2547 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2549 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2551 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2552 floatformat_to_double to make portable.
2553 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2556 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2558 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2559 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2561 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2563 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2564 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2566 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2568 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2569 (OFF_SL_BR_SCALED): ... to this, and added the flag
2570 TIC80_OPERAND_BASEREL to the flags word.
2571 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2574 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2576 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2577 Change mips_opcodes from const array to a pointer,
2578 and change bfd_mips_num_opcodes from const int to int,
2579 so that we can increase the size of the mips opcodes table
2582 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2584 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2585 store BITNUM values in the table in one's complement form
2586 to match behavior when assembler is given a raw numeric
2587 value for a BITNUM operand.
2588 * tic80-dis.c (print_operand_bitnum): Ditto.
2590 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2592 * d30v-opc.c: Removed references to FLAG_X.
2594 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2596 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2598 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2600 * Makefile.in: Added d30v object files.
2601 * configure: (bfd_d30v_arch) Rebuilt.
2602 * configure.in: (bfd_d30v_arch) Added new case.
2603 * d30v-dis.c: New file.
2604 * d30v-opc.c: New file.
2605 * disassemble.c (disassembler) Add entry for d30v.
2607 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2609 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2610 representations for the floating point BITNUM values.
2612 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2614 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2615 in the table in one's complement form, as they appear in the
2617 (tic80_symbol_to_value): Use macros to access predefined
2619 (tic80_value_to_symbol): Ditto.
2620 (tic80_next_predefined_symbol): New function.
2621 * tic80-dis.c (print_operand_bitnum): Remove code that did
2622 one's complement for BITNUM values.
2624 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2626 * makefile.vms: Remove 8 bit characters. Update to latest
2629 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2631 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2633 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2635 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2636 (IMM24_PCREL): Likewise.
2638 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2640 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2641 address for an extended PC relative instruction that is not a
2644 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2646 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2649 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2651 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2652 (tic80_opcodes): Sort entries so that long immediate forms
2653 come after short immediate forms, making it easier for
2654 assembler to select the right one for a given operand.
2656 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2658 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2660 (print_insn_mips16): Likewise.
2662 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2664 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2665 a symbol class that restricts translation to just that
2666 class (general register, condition code, etc).
2668 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2670 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2671 and REG_DEST_E for register operands that have to be
2672 an even numbered register. Add REG_FPA for operands that
2673 are one of the floating point accumulator registers.
2674 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2675 (tic80_opcodes): Change entries that need even numbered
2676 register operands to use the new operand table entries.
2677 Add "or" entries that are identical to "or.tt" entries.
2679 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2681 * mips16-opc.c: Add new cases of exit instruction for
2683 * mips-dis.c (print_mips16_insn_arg): Display floating point
2684 registers in operands of exit instruction. Print `$' before
2685 register names in operands of entry and exit instructions.
2687 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2689 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2690 pairs for all predefined symbols recognized by the assembler.
2691 Also used by the disassembling routines.
2692 (tic80_symbol_to_value): New function.
2693 (tic80_value_to_symbol): New function.
2694 * tic80-dis.c (print_operand_control_register,
2695 print_operand_condition_code, print_operand_bitnum):
2696 Remove private tables and use tic80_value_to_symbol function.
2698 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2700 * d10v-dis.c (print_operand): Change address printing
2701 to correctly handle PC wrapping. Fixes PR11490.
2703 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2705 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2708 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2710 * mips-dis.c (print_insn_mips16): Set insn_info information.
2711 (print_mips16_insn_arg): Likewise.
2713 * mips-dis.c (print_insn_mips16): Better handling of an extend
2714 opcode followed by an instruction which can not be extended.
2716 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2718 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2719 coldfire moveb instruction to not allow an address register as
2720 destination. Although the documentation does not indicate that
2721 this is invalid, experiments uncovered unexpected behavior.
2722 Added a comment explaining the situation. Thanks to Andreas
2723 Schwab for pointing this out to me.
2725 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2728 entries are presorted so that entries with the same mnemonic are
2729 adjacent to each other in the table. Sort the entries for each
2730 instruction so that this is true.
2732 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2734 * m68k-dis.c: Include <libiberty.h>.
2735 (print_insn_m68k): Sort the opcode table on the most significant
2736 nibble of the opcode.
2738 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2740 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2741 "vsub", "vst", "xnor", and "xor" instructions.
2742 (V_a1): Renamed from V_a, msb of accumulator reg number.
2743 (V_a0): Add macro, lsb of accumulator reg number.
2745 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2747 * tic80-dis.c (print_insn_tic80): Broke excessively long
2748 function up into several smaller ones and arranged for
2749 the instruction printing function to be callable recursively
2750 to print vector instructions that have both a load and a
2751 math instruction packed into a single opcode.
2752 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2753 to explain why it comes after the other vector opcodes.
2755 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2757 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2758 move insns to handle immediate operands.
2760 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2762 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2763 fix operand mask in the "moveml" entries for the coldfire.
2765 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2767 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2768 New macros for building vector instruction opcodes.
2769 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2770 FMT_LI, which were unused. The field is now a flags field.
2771 Remove some opcodes that are possible, but illegal, such
2772 as long immediate instructions with doubles for immediate
2773 values. Add "vadd" and "vld" instructions.
2775 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2777 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2778 the order more logical. Move the shift alias instructions ("rotl",
2779 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2780 interspersed with the regular sr.x and sl.x instructions. Add
2781 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2782 "sub", "subu", "swcr", and "trap".
2784 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2786 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2787 (OFF_SL_PC): Renamed from OFF_SL.
2788 (OFF_SS_BR): New operand type for base relative operand.
2789 (OFF_SL_BR): New operand type for base relative operand.
2790 (REG_BASE): New operand type for base register operand.
2791 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2792 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2793 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2795 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2796 10 char field, padded with spaces on rhs, rather than a string
2797 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2798 than old TIC80_OPERAND_RELATIVE. Add support for new
2799 TIC80_OPERAND_BASEREL flag bit.
2801 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2803 * tic80-dis.c (print_insn_tic80): Print floating point operands
2805 * tic80-opc.c (SPFI): Add single precision floating point
2806 immediate operand type.
2807 (ROTATE): Add rotate operand type for shifts.
2808 (ENDMASK): Add for shifts.
2809 (n): Macro for the 'n' bit.
2810 (i): Macro for the 'i' bit.
2811 (PD): Macro for the 'PD' field.
2812 (P2): Macro for the 'P2' field.
2813 (P1): Macro for the 'P1' field.
2814 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2817 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2819 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2820 adding in current address for pc-relative operands.
2822 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2824 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2825 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2826 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2827 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2828 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2829 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2830 (REG_SCALED, LSI_SCALED): New operand types.
2831 (E): New macro for 'E' bit at bit 27.
2832 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2833 opcodes, including the various size flavors (b,h,w,d) for
2834 the direct load and store instructions.
2836 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2838 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2840 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2841 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2842 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2843 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2844 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2845 masks with "MASK_* & ~M_*" to get the M bit reset.
2846 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2848 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2850 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2851 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2852 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2854 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2855 CC, SICR, and LICR table entries.
2856 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2857 "bcnd", and "brcr" opcodes.
2859 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2861 * ppc-opc.c (powerpc_operands): Make comment match the
2862 actual fields (no shift field).
2863 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2864 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2865 partial implementation, work in progress.
2866 * tic80-opc.c (tic80_operands): Begin construction operands table.
2867 (tic80_opcodes): Continue populating opcodes table and start
2868 filling in the operand indices.
2869 (tic80_num_opcodes): Add this.
2871 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2873 * m68k-opc.c: Add #B case for moveq.
2875 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2877 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2878 before they are used.
2880 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2882 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2883 for "breakpoint" instruction.
2885 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2887 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2888 (dep): Use ALL_CFLAGS rather than CFLAGS.
2890 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2892 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2895 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2897 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2898 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2900 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2902 * mips16-opc.c: Add "abs".
2904 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2906 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2907 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2908 (disassembler): Add bfd_arch_tic80 support to set disassemble
2909 to print_insn_tic80.
2910 * tic80-dis.c (print_insn_tic80): Add stub.
2912 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2914 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2915 * configure: Regenerate with autoconf.
2916 * tic80-dis.c: Add file.
2917 * tic80-opc.c: Add file.
2919 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2921 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2923 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2925 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2926 (mn10200_opcodes): Use it for some logicals and btst insns.
2927 Add "break" and "trap" instructions.
2929 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2931 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2933 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2935 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2936 relative load or add now depends upon whether the instruction is
2939 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2941 * mn10200-dis.c: Finish writing disassembler.
2942 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2943 Fix mask for "jmp (an)".
2945 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2946 handle endianness issues for mn10300.
2948 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2950 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2952 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2953 instruction. Fix opcode field for "movb (imm24),dn".
2955 * mn10200-opc.c (mn10200_operands): Fix insertion position
2958 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10200-opc.c: Create mn10200 opcode table.
2961 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2962 but moving along nicely.
2964 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2966 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2968 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2970 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2971 specifiers for fmovem* instructions.
2973 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2975 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2977 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2979 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2982 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2984 * mn10300-opc.c: Add some comments explaining the various
2987 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2989 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2991 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2994 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2995 operand specifiers in fmovm* instructions.
2997 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2999 * ppc-opc.c (insert_li): Give an error if the offset has the two
3000 least significant bits set.
3002 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3004 * mips-dis.c (print_insn_mips16): Separate the instruction from
3005 the arguments with a tab, not a space.
3007 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3009 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3012 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3015 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3017 * configure: Rebuild with autoconf 2.12.
3019 Add support for mips16 (16 bit MIPS implementation):
3020 * mips16-opc.c: New file.
3021 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3022 (mips16_reg_names): New static array.
3023 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3024 after seeing a 16 bit symbol.
3025 (print_insn_little_mips): Likewise.
3026 (print_insn_mips16): New static function.
3027 (print_mips16_insn_arg): New static function.
3028 * mips-opc.c: Add jalx instruction.
3029 * Makefile.in (mips16-opc.o): New target.
3030 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3031 * configure: Rebuild.
3033 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3035 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3036 operand specifiers in *save, *restore and movem* instructions.
3038 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3041 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3042 register operands for immediate arithmetic, not, neg, negx, and
3043 set according to condition instructions.
3045 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3046 specifier of the effective-address operand in immediate forms of
3047 arithmetic instructions. The specifier for the immediate operand
3048 notes how and where the constant will be stored.
3050 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3052 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3055 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3058 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3060 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3062 * mn10300-dis.c (disassemble): Handle register lists.
3064 * mn10300-opc.c: Fix handling of register list operand for
3065 "call", "ret", and "rets" instructions.
3067 * mn10300-dis.c (disassemble): Print PC-relative and memory
3068 addresses symbolically if possible.
3069 * mn10300-opc.c: Distinguish between absolute memory addresses,
3070 pc-relative offsets & random immediates.
3072 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3074 (disassemble): Handle SPLIT and EXTENDED operands.
3076 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3078 * mn10300-dis.c: Rough cut at printing some operands.
3080 * mn10300-dis.c: Start working on disassembler support.
3081 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3083 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3085 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3087 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3089 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3091 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3093 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3094 register argument is calls and jmp instructions.
3096 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3098 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3099 getx operand. Fix opcode for mulqu imm,dn.
3101 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3103 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3104 in MN10300_OPERAND_SPLIT operands for how many bits
3105 appear in the basic insn word. Add IMM32_HIGH24,
3106 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3107 (mn10300_opcodes): Use new operands as needed.
3109 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3110 for bset, bclr, btst instructions.
3111 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3113 * mn10300-opc.c (mn10300_operands): Remove many redundant
3114 operands. Update opcode table as appropriate.
3115 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3116 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3118 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3120 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3121 operands (for indexed load/stores). Fix bitpos for DI
3122 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3123 few instructions that insert immediates/displacements in the
3124 middle of the instruction. Add IMM8E for 8 bit immediate in
3125 the extended part of an instruction.
3126 (mn10300_operands): Use new opcodes as appropriate.
3128 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3130 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3131 sequential so the assembler never parallelizes it with
3134 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3136 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3137 a data/address register that appears in register field 0
3138 and register field 1.
3139 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3141 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3143 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3144 standard disassembly.
3146 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3147 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3148 Recategorize PALcode instructions.
3150 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3152 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3154 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3156 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3157 there are no operand types.
3159 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3161 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3163 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3165 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3167 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3169 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3171 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3172 and sst.w instructions.
3174 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3177 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3179 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3182 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3184 * ppc-opc.c (PPCPWR2): Define.
3185 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3188 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3190 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3191 field for movhu instruction.
3193 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3194 cast value to "long" not "signed long" to keep hpux10
3197 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3199 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3202 * mn10300-opc.c (FMT*): Remove definitions.
3204 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3205 for shift-by-register opcodes.
3207 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3208 into [AD][MN][01] for encoding the position of the register
3211 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3213 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3214 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3216 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3218 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3219 Fix various typos. Add "PAREN" operand.
3220 (MEM, MEM2): Define.
3221 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3222 operands. Fix several typos.
3224 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3227 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3229 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3230 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3232 (mn10300_opcodes): Break opcode format out into its own field.
3233 Update many operand fields to deal with signed vs unsigned
3234 issues. Fix one or two typos in the "mov" instruction
3235 opcode, mask and/or operand fields.
3237 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3239 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3240 m68851 wasn't reset.
3242 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3244 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3245 all opcodes. Very rough cut at operands for all opcodes.
3247 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3250 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3252 * mn10200-opc.c, mn10300-opc.c: New files.
3253 * mn10200-dis.c, mn10300-dis.c: New files.
3254 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3255 * disassemble.c: Break mn10x00 support into 10200 and 10300
3257 * configure.in: Likewise.
3258 * configure: Rebuilt.
3260 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3262 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3264 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3266 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3268 * disassemble (ARCH_mn10x00): Define.
3269 (disassembler): Handle bfd_arch_mn10x00.
3270 * configure.in: Recognize bfd_mn10x00_arch.
3271 * configure: Rebuilt.
3273 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3275 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3276 accordingly. Don't declare functions using op_rtn.
3278 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3280 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3281 params to be more standard.
3282 * (disassemble): Print absolute addresses and symbolic names for
3283 branch and jump targets.
3284 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3286 * (v850_opcodes): Add breakpoint insn.
3288 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3290 * m68k-opc.c: Move the fmovemx data register cases before the
3291 other cases, so that they get recognized before the data register
3292 does gets treated as a degenerate register list.
3294 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3296 * mips-opc.c: Add a case for "div" and "divu" with two registers
3297 and a destination of $0.
3299 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3301 * mips-dis.c (print_insn_arg): Add prototype.
3302 (_print_insn_mips): Ditto.
3304 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3306 * mips-dis.c (print_insn_arg): Print condition code registers as
3309 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3311 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3313 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3315 * v850-dis.c (disassemble): Make static. Provide prototype.
3317 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3319 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3322 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3324 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3325 ']' characters into the output stream.
3326 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3327 Add "memop" field to all opcodes (for the disassembler).
3328 Reorder opcodes so that "nop" comes before "mov" and "jr"
3329 comes before "jarl".
3331 * v850-dis.c (print_insn_v850): Fix typo in last change.
3333 * v850-dis.c (print_insn_v850): Properly handle disassembling
3334 a two byte insn at the end of a memory region when the memory
3335 region's size is only two byte aligned.
3337 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3339 * v850-dis.c (v850_reg_names): Define.
3340 (v850_sreg_names, v850_cc_names): Likewise.
3341 (disassemble): Very rough cut at printing operands (unformatted).
3343 * v850-opc.c (BOP_MASK): Fix.
3344 (v850_opcodes): Fix mask for jarl and jr.
3346 * v850-dis.c: New file. Skeleton for disassembler support.
3347 * Makefile.in Remove v850 references, they're not needed here.
3348 * configure.in: Add v850-dis.o when building v850 toolchains.
3349 * configure: Rebuilt.
3350 * disassemble.c (disassembler): Call v850 disassembler.
3352 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3353 (insert_d8_6, extract_d8_6): New functions.
3354 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3355 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3357 (IF4A, IF4B): Use "D7" instead of "D7S".
3358 (IF4C, IF4D): Use "D8_7" instead of "D8".
3359 (IF4E, IF4F): New. Use "D8_6".
3360 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3361 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3363 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3364 (v850_operands): Change D16 to D16_15, use special insert/extract
3365 routines. New new D16 that uses the generic insert/extract code.
3366 (IF7A, IF7B): Use D16_15.
3367 (IF7C, IF7D): New. Use D16.
3368 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3370 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3371 message. Issue an error if the branch offset is odd.
3373 * v850-opc.c: Add notes about needing special insert/extract
3374 for all the load/store insns, except "ld.b" and "st.b".
3376 * v850-opc.c (insert_d22, extract_d22): New functions.
3377 (v850_operands): Use insert_d22 and extract_d22 for
3379 (insert_d9): Fix range check.
3381 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3383 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3384 and set bits field to D9 and D22 operands.
3386 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3388 * v850-opc.c (v850_operands): Define SR2 operand.
3389 (v850_opcodes): "ldsr" uses R1,SR2.
3391 * v850-opc.c (v850_opcodes): Fix opcode specs for
3392 sld.w, sst.b, sst.h, sst.w, and nop.
3394 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3396 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3397 end of the opcode table.
3399 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3401 * d10v-opc.c (pre_defined_registers): Added register pairs,
3402 "r0-r1", "r2-r3", etc.
3404 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3406 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3407 Create I16U for an unsigned 16bit mmediate operand.
3408 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3410 * v850-opc.c (v850_operands): Define EP operand.
3411 (IF4A, IF4B, IF4C, IF4D): Use EP.
3413 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3414 with immediate operand, "movhi". Tweak "ldsr".
3416 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3417 correct. Get sld.[bhw] and sst.[bhw] closer.
3419 * v850-opc.c (v850_operands): "not" is a two byte insn
3421 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3423 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3425 * v850-opc.c (two): Get order of words correct.
3427 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3429 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3430 register source and destination operands.
3431 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3433 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3434 same thinko in "trap" opcode.
3436 * v850-opc.c (v850_opcodes): Add initializer for size field
3439 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3440 Add D8 for 8-bit unsigned field in short load/store insns.
3441 (IF4A, IF4D): These both need two registers.
3442 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3443 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3444 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3445 for "ldsr" and "stsr".
3446 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3449 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3450 short store word (sst.w).
3452 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3454 * v850-opc.c (v850_operands): Added insert and extract fields,
3455 pointers to functions that handle unusual operand encodings.
3457 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3459 * v850-opc.c (v850_opcodes): Enable "trap".
3461 * v850-opc.c (v850_opcodes): Fix order of displacement
3462 and register for "set1", "clr1", "not1", and "tst1".
3464 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3466 * v850-opc.c (v850_operands): Add "B3" support.
3467 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3470 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3472 * v850-opc.c: Close unterminated comment.
3474 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3476 * v850-opc.c (v850_operands): Add flags field.
3477 (v850_opcodes): add move opcodes.
3479 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3481 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3482 * configure: (bfd_v850v_arch) Add new case.
3483 * configure.in: (bfd_v850_arch) Add new case.
3484 * v850-opc.c: New file.
3486 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3488 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3490 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3492 * d10v-opc.c: Add additional information to the opcode
3493 table to help determinine which instructions can be done
3496 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3498 * mpw-make.sed: Update editing of include pathnames to be
3501 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3503 * arm-opc.h: Added "bx" instruction definition.
3505 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3507 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3509 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3511 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3513 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3515 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3517 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3519 * makefile.vms: Update for alpha-opc changes.
3521 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3523 * i386-dis.c (print_insn_i386): Actually return the correct value.
3524 (ONE, OP_ONE): #ifdef out; not used.
3526 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3528 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3529 Changed subi operand type to treat 0 as 16.
3531 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3536 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3538 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3539 memory transfer instructions. Add new format string entries %h and %s.
3540 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3543 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3545 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3546 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3548 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3550 * alpha-dis.c (print_insn_alpha_osf): Remove.
3551 (print_insn_alpha_vms): Remove.
3552 (print_insn_alpha): Make globally visible. Chose the register
3553 names based on info->flavour.
3554 * disassemble.c: Always return print_insn_alpha for the alpha.
3556 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3558 * d10v-dis.c (dis_long): Handle unknown opcodes.
3560 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3562 * d10v-opc.c: Changes to support signed and unsigned numbers.
3563 All instructions with the same name that have long and short forms
3564 now end in ".l" or ".s". Divs added.
3565 * d10v-dis.c: Changes to support signed and unsigned numbers.
3567 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3569 * d10v-dis.c: Change all functions to use info->print_address_func.
3571 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3573 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3574 move ccr/sr insns more strict so that the disassembler only
3575 selects them when the addressing mode is data register.
3577 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3578 * d10v-opc.c (pre_defined_registers): Declare.
3579 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3580 to pick a better name for the registers.
3582 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3584 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3585 operands for fexpand and fpmerge. From Christian Kuehnke
3586 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3588 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3590 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3591 print routine. Take new regnames and cpumask arguments.
3592 Kill the environment variable nonsense.
3593 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3594 (print_insn_alpha_vms): New function. Do VMS style regnames.
3595 * disassemble.c (disassembler): Test bfd flavour to pick
3596 between OSF and VMS routines. Default to OSF.
3598 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3600 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3601 * configure: Rebuild.
3602 * Makefile.in (install): Use @INSTALL_SHLIB@.
3604 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3606 * configure: (bfd_d10v_arch) Add new case.
3607 * configure.in: (bfd_d10v_arch) Add new case.
3608 * d10v-dis.c: New file.
3609 * d10v-opc.c: New file.
3610 * disassemble.c (disassembler) Add entry for d10v.
3612 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3614 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3615 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3617 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3619 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3620 distinguish between variants of the instruction set.
3621 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3622 distinguish between variants of the instruction set.
3624 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3626 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3627 the 8086 instruction set.
3628 * i386-dis.c: General cleanups. Make most things static. Add
3629 prototypes. Get rid of static variables aflags and dflags. Pass
3630 them as args (to almost everything).
3632 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3634 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3636 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3638 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3639 if the next arg is marked with SRC_IN_DST. Gross.
3641 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3642 we're looking for and find EXR.
3644 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3645 if we're looking for KBIT and we don't find it.
3647 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3650 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3651 3bit immediate operands.
3653 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3655 * Released binutils 2.7.
3657 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3658 <kkaempf@progis.ac-net.de>.
3660 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3662 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3664 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3666 * sparc-dis.c (print_insn_sparclite): New routine to print
3667 sparclite instructions.
3669 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3671 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3673 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3675 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3676 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3677 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3679 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3681 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3682 Use autoconf-set values.
3683 (docdir, oldincludedir): Removed.
3684 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3686 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3688 * alpha-opc.c: New file.
3689 * alpha-opc.h: Remove.
3690 * alpha-dis.c: Complete rewrite to use new opcode table.
3691 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3692 * configure: Rebuild with autoconf 2.10.
3693 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3694 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3696 (alpha-opc.o): New target.
3698 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3700 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3701 Set imm_added_to_rs1 even if the source and destination register
3704 * sparc-opc.c: Add some two operand forms of the wr instruction.
3706 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3708 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3711 * disassemble.c (disassembler): Handle H8/S.
3712 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3714 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3716 * sparc-opc.c: Add beq/teq as aliases for be/te.
3718 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3719 <sergei@msil.sps.mot.com>.
3721 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3723 * makefile.vms: New file.
3725 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3727 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3729 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3732 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3734 * i386-dis.c (OP_OFF): Call append_prefix.
3736 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3738 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3739 unsigned long to silence a warning from the Solaris PowerPC
3742 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3744 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3746 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3748 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3750 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3751 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3752 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3753 cpush, cpusha, cpull sparclet insns.
3755 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3757 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3759 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3761 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3762 Set F_FLOAT on other floating point instructions.
3764 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3766 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3768 (powerpc_opcodes): Add 860/821 specific SPRs.
3770 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3772 * configure.in: Permit --enable-shared to specify a list of
3773 directories. Set and substitute BFD_PICLIST.
3774 * configure: Rebuild.
3775 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3776 uses. Set to @BFD_PICLIST@.
3778 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3780 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3781 not "abs", which may be needed for the absolute in something
3782 like btst #0,@10:8. Print L_3 immediates separately from other
3783 immediates. Change ABSMOV reference to ABS8MEM.
3785 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3787 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3788 (current_arch_mask): New static global.
3789 (compute_arch_mask): New static function.
3790 (print_insn_sparc): Delete sparc_v9_p. New static local
3791 current_mach. Resort opcode table if current_mach changes.
3792 Generalize "insn not supported" test.
3793 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3794 Delete test for v9/!v9.
3795 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3797 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3798 (brfcx): Renamed to FBRX.
3799 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3800 coprocessor mnemonics are not supported on the sparclet).
3801 (condf): Renamed to CONDF.
3802 (SLCBCC2): Delete F_ALIAS flag.
3804 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3806 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3807 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3809 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3811 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3812 that the shared library version number is set correctly.
3814 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3816 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3817 Miles Bader <miles@gnu.ai.mit.edu>.
3818 * configure: Rebuild.
3820 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3822 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3825 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3827 * configure: Rebuild with autoconf 2.8.
3829 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3831 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3832 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3834 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3836 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3837 since they appear as targets in Makefile.in.
3838 * configure: Rebuild.
3840 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3842 * mpw-make.sed: Edit out shared library support bits.
3844 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3846 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3847 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3848 (sparc_opcodes): Add sparclet insns.
3849 (sparclet_cpreg_table): New static local.
3850 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3851 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3853 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3855 * i386-dis.c (index16): New static variable.
3856 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3858 (OP_indirE): Return result of OP_E.
3859 (OP_E): Check for 16 bit addressing mode, and disassemble
3860 correctly. Optimised 32 bit case a little. Don't print
3861 "(base,index,scale)" when sib specifies only an offset.
3863 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3865 * configure.in: Set and substitute SHLIB_DEP.
3866 * configure: Rebuild.
3867 * Makefile.in (SHLIB_DEP): New variable.
3868 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3869 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3870 COMMON_SHLIB, add them to piclist with appropriate modifications.
3871 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3872 here: just use piclist.
3874 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3876 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3877 (print_insn_sparc): Rewrite v9/not-v9 tests.
3878 (compare_opcodes): Likewise.
3879 * sparc-opc.c (MASK_<ARCH>): Define.
3880 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3881 (sparclet,v6notv9): Define.
3882 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3883 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3885 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * configure.in: Call AC_PROG_CC before configure.host.
3888 * configure: Rebuild.
3890 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3892 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3894 * i386-dis.c (onebyte_has_modrm): New static array.
3895 (twobyte_has_modrm): New static array.
3896 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3898 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3900 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3903 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3905 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3908 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3910 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3911 m68010up, not just m68020up | cpu32.
3913 * Makefile.in (SONAME): New variable.
3914 ($(SHLINK)): Make a link to the transformed name, as well.
3915 (stamp-tshlink): New target.
3916 (install): Skip stamp-tshlink during install.
3918 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3920 * configure.in: Call AC_ARG_PROGRAM.
3921 * configure: Rebuild.
3922 * Makefile.in (program_transform_name): New variable.
3923 (install): Transform library name before installing it.
3925 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3927 * i960-dis.c (mem): Add HX dcinva instruction.
3929 Support for building as a shared library, based on patches from
3930 Alan Modra <alan@spri.levels.unisa.edu.au>:
3931 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3932 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3933 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3934 * configure: Rebuild.
3935 * Makefile.in (ALLLIBS): New variable.
3936 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3937 (COMMON_SHLIB, SHLINK): New variables.
3938 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3939 (STAGESTUFF): Remove variable.
3940 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3941 (stamp-piclist, piclist): New targets.
3942 ($(SHLIB), $(SHLINK)): New targets.
3943 ($(OFILES)): Depend upon stamp-picdir.
3944 (disassemble.o): Build twice if PICFLAG is set.
3945 (MOSTLYCLEAN): Add pic/*.o.
3946 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3947 (distclean): Remove pic and stamp-picdir.
3948 (install): Install shared libraries.
3949 (stamp-picdir): New target.
3951 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3953 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3954 Print unknown instruction as "unknown", rather than in hex.
3956 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3958 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3960 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3962 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3964 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3966 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3967 when necessary. From Ulrich Drepper
3968 <drepper@myware.rz.uni-karlsruhe.de>.
3970 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3972 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3973 sparc_num_opcodes. Update architecture enum values.
3974 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3975 (sparc_opcode_lookup_arch): New function.
3976 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3977 (sparc_opcodes): Add v9a shutdown insn.
3979 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3981 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3982 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3984 (print_insn_sparc64): Deleted.
3985 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3988 * sparc-opc.c (architecture_pname): Add v9a.
3990 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3992 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3993 incorrectly defined as 0x16 when it should be 0x15.
3994 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3995 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3996 excb (exception barrier) which is defined in the Alpha
3997 Architecture Handbook version 2.
3998 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3999 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4000 disassembled as or, for example.
4002 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4004 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4005 (_print_insn_mips): Change i from int to unsigned int.
4007 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4009 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4010 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4012 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4014 * i386-dis.c: Added Pentium Pro instructions.
4016 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4018 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4021 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4023 * sh-opc.h (sh_nibble_type): Added REG_B.
4024 (sh_arg_type): Added A_REG_B.
4025 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4027 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4029 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4031 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4033 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4035 * Makefile.in (distclean): Remove stamp-h. From Ronald
4036 F. Guilmette <rfg@monkeys.com>.
4038 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4040 From David Mosberger-Tang <davidm@azstarnet.com>:
4041 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4044 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4046 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4047 (sh_table): Added many SH3 opcodes.
4048 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4050 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4052 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4053 (subco,subco.): Mark this PPC, not PPCCOM.
4055 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4057 * configure: Rebuild with autoconf 2.7.
4059 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4061 * configure: Rebuild with autoconf 2.6.
4063 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4065 * configure.in: Sort list of architectures. Accept but do nothing
4066 for alliant, convex, pyramid, romp, and tahoe.
4068 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * a29k-dis.c (print_special): Change num to unsigned int.
4072 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4074 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4077 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4079 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4080 * configure: Rebuilt.
4082 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4084 * configure.in: Add case for bfd_i860_arch.
4085 * configure: Rebuild.
4087 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4089 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4090 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4091 (NEXTDOUBLE): Likewise.
4092 (print_insn_m68k): Don't match fmoveml if there is more than one
4093 register in the list.
4094 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4096 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4098 * m68k-opc.c: Use #W rather than #w.
4099 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4101 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4103 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4104 and likewise for all the dbxx opcodes.
4106 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4108 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4110 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4112 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4113 the VR4100 specific instructions to the mips_opcodes structure.
4115 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4117 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4118 ugly Metrowerks bug in CW6, is fixed in CW7.
4120 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4122 * ppc-opc.c (whole file): Add flags for common/any support.
4124 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4126 * Makefile.in (BISON): Remove macro.
4127 (FLAGS_TO_PASS): Remove BISON.
4129 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4131 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4133 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4134 instructions that take no args by looking at the match mask.
4135 (print_insn_arg): Always print "%" before register names.
4136 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4137 [case '_']: Don't print "@#" before address.
4138 [case 'J']: Use "%s" as format string, not register name.
4139 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4141 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4143 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4146 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4148 From David Mosberger-Tang <davidm@azstarnet.com>
4150 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4151 (alpha_insn_set): added definitions for VAX floating point
4152 instructions (Unix compilers don't generate these, but handcoded
4153 assembly might still use them).
4155 * alpha-dis.c (print_insn_alpha): added support for disassembling
4156 the miscellaneous instructions in the Alpha instruction set.
4158 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4160 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4161 no longer create sysdep.h, sed ppc-opc.c to work around a
4162 serious Metrowerks C bug.
4163 * mpw-make.in: Remove.
4164 * mpw-make.sed: New file, used by mpw-configure to edit
4165 Makefile.in into an MPW makefile.
4167 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4169 * Makefile.in (maintainer-clean): New synonym for realclean.
4171 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4173 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4174 which use '0', '1', and '2' instead. Specify the proper size for
4175 a pmove immediate operand. Correct the pmovefd patterns to be
4176 moves to a register, not from a register.
4177 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4179 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4181 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4182 %psr, %wim, %tbr as F_NOTV9.
4184 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4186 * Makefile.in (Makefile): Just rebuild Makefile when running
4188 (config.h, stamp-h): New targets.
4189 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4190 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4191 rebuilding config.h.
4192 * configure: Rebuild.
4194 * mips-opc.c: Change unaligned loads and stores with "t,A"
4195 operands to use "t,A(b)".
4197 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4199 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4201 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4203 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4204 until 3 instead of until 2.
4206 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4208 * Makefile.in (ALL_CFLAGS): Define.
4209 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4210 (MOSTLYCLEAN): Add config.log.
4211 (distclean): Don't remove config.log.
4212 * configure.in: Substitute HDEFINES.
4213 * configure: Rebuild.
4215 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4217 * sh-opc.h (sh_arg_type): Add F_FR0.
4218 (sh_table, case fmac): Add F_FR0 as first argument.
4220 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4222 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4224 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4226 * sparc-dis.c: Remove all references to NO_V9.
4228 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4230 * aclocal.m4: Just include ../bfd/aclocal.m4.
4231 * configure: Rebuild.
4233 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4235 * sparc-dis.c (X_DISP19): Define.
4236 (print_insn, case 'G'): Use it.
4237 (print_insn, case 'L'): Sign extend displacement.
4239 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4241 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4242 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4243 host_makefile_frag or frags.
4244 * aclocal.m4: New file.
4245 * configure: Rebuild.
4246 * Makefile.in (INSTALL): Set to @INSTALL@.
4247 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4248 (INSTALL_DATA): Set to @INSTALL_DATA@.
4250 (AR_FLAGS): Set to rc rather than qc.
4251 (CC): Define as @CC@.
4252 (CFLAGS): Set to @CFLAGS@.
4253 (@host_makefile_frag@): Remove.
4254 (config.status): Remove dependency upon @frags@.
4256 * configure.in: ../bfd/config.bfd now just sets shell variables.
4257 Use them rather than looking through target Makefile fragments.
4258 * configure: Rebuild.
4260 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4262 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4264 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4266 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4267 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4270 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4271 (lookup_{name,value}): New functions.
4272 (prefetch_table): New static local.
4273 (sparc_{encode,decode}_prefetch): New functions.
4274 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4276 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4278 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4281 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4283 * sh-dis.c: Correct comment on first line of file.
4285 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4287 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4289 * sparc-opc.c (asi, membar): New static locals.
4290 (sparc_{encode,decode}_{asi,membar}): New functions.
4291 (sparc_opcodes, membar insn): Fix.
4292 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4293 Support decoding of membar masks.
4296 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4298 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4300 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4302 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4303 and likewise for the other branches. Add bhs as an alias for bcc,
4304 and likewise for the size variants. Add dbhs as an alias for
4307 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4309 * sh-opc.h (FP sts instructions): Update to match reality.
4311 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4313 * m68k-dis.c: (fpcr_names): Add % before all register names.
4314 (reg_names): Likewise.
4315 (print_insn_arg): Don't explicitly print % before register names.
4316 Add % before register names in static array names. In case 'r',
4317 print data registers as `@(Dn)', not `Dn@'. When printing a
4318 memory address, don't print @# before it.
4319 (print_indexed): Change base_disp and outer_disp from int to
4320 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4321 syntax. Sign extend 8 byte displacement correctly.
4322 (print_base): Print using MIT syntax. Print zpc when appropriate.
4323 Change parameter disp from int to bfd_vma.
4325 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4328 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4330 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4331 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4332 * sh-opc.h (sh_arg_type): Add new operand types.
4333 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4335 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4337 * Makefile.in (distclean): Remove generated file config.h.
4339 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4341 * Makefile.in (distclean): Remove generated file config.h.
4343 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4345 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4347 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4349 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4350 rather than numopcodes. Use m68k_opcodes rather than removed
4351 opcode function. Don't check F_ALIAS.
4352 (print_insn_arg): Change first parameter to be const char *.
4353 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4354 (m68k-opc.o): New target.
4355 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4356 * configure: Rebuild.
4358 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4360 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4361 (opcode_bits, opcode_hash_table): New variables.
4362 (opcodes_initialized): Renamed from opcodes_sorted.
4363 (build_hash_table): New function.
4364 (is_delayed_branch): Use hash table.
4365 (print_insn): Renamed from print_insn_sparc, made static.
4366 Build and use hash table. If !sparc64, ignore sparc64 insns,
4367 and vice-versa if sparc64.
4368 (print_insn_sparc, print_insn_sparc64): New functions.
4369 (compare_opcodes): Move sparc64 opcodes to end.
4370 Print commutative insns with constant second.
4371 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4373 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4375 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4376 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4377 avoids printing a delay slot in a delay slot.
4378 * sh-opc.h (sh_table): Fully bracket last entry.
4380 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4382 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4384 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4386 * configure.in: Get host_makefile_frag from ${srcdir}.
4388 * configure.in: Autoconfiscated. Check for string[s].h. Create
4389 config.h from config.in. Don't set up sysdep.h link.
4390 * sysdep.h: New file.
4391 * configure, config.in: New files, generated from configure.in.
4392 * Makefile.in: Updated to be processed autoconf-style.
4393 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4394 (Makefile): Depend on config.status.
4395 (config.status): New rule.
4396 * configure.bat: Update Makefile substitutions.
4398 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4400 * mips-opc.c (L1): Define.
4401 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4402 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4405 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4407 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4408 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4409 have multiple add units but only a single logical unit.
4411 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4412 shifted by 18, without any insertion or extraction function.
4413 (insert_cr, extract_cr): Remove.
4415 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4417 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4420 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4422 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4423 * sh-opc.h: Add copyright.
4425 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4427 * Makefile.in (crunch-m68k): Delete extra target accidentally
4428 checked in a while ago.
4430 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4432 * sh-opc.h (sh_table): Add SH3 support.
4434 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4436 * sh-opc.h: Added bsrf and braf.
4438 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4440 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4441 bogus [ls]fm{ea,fd} patterns.
4443 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4444 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4445 initialize it from memory. Make function static.
4446 (print_insn_{big,little}_arm): New functions.
4447 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4448 the correct endianness.
4450 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4452 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4455 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4457 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4458 17th, so that it builds again using GCC as the compiler.
4460 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4462 * mips-dis.c (print_insn_little_mips): Cast return value from
4463 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4464 expects an unsigned long, and that might be fewer words of
4465 argument storage (e.g., if bfd_vma is long long on a 32-bit
4467 (print_insn_big_mips): Likewise with bfd_getb32 value.
4468 (_print_insn_mips): Now static.
4470 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4472 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4473 gcc memory hog problem with initializer is fixed.
4475 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4477 Merge in support for Mac MPW as a host.
4478 (Old change descriptions retained for informational value.)
4480 * mpw-config.in (archname): Compute from the config.
4481 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4483 * mpw-config.in (target_arch): Compute from canonical target.
4484 (m68k, mips, powerpc, sparc): Add architectures.
4485 * mpw-make.in (disassemble.c.o): Add.
4486 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4488 * mpw-config.in (BFD_MACHINES): Set to a default value.
4489 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4491 * mpw-make.in (CSEARCH): Add extra-include to search path.
4493 * mpw-config.in (varargs.h): Don't create.
4494 (sysdep.h): Create using forward-include.
4495 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4497 * mpw-config.in: New file, MPW version of configure.in.
4498 * mpw-make.in: New file, MPW version of Makefile.in.
4500 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4502 * alpha-dis.c (print_insn_alpha): Put empty statement after
4505 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4507 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4508 (low_sign_extend): Likewise.
4509 (get_field): Delete unused function.
4510 (set_field, deposit_14, deposit_21): Likewise.
4512 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4514 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4517 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4519 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4521 * alpha-opc.h (OSF_ASMCODE): define
4522 print pal-code names as defined in App C of the
4523 Alpha Architecture Reference Manual
4525 * alpha-dis.c: cleaned up output
4526 print stylized code forms as defined in App A.4.3 of the
4527 Alpha Architecture Reference Manual
4529 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4531 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4533 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4536 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4538 * m68k-dis.c (opcode): New function. Returns address of opcode
4539 table entry given index, even if the opcode table was split to
4540 work around gcc bugs.
4541 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4543 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4544 (reg_names): Now const.
4545 (print_insn_arg): Arrays cacheFieldName and names now const.
4546 (print_indexed): Array scales now const.
4548 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4550 * ppc-opc.c: Sort recently added instructions by minor opcode
4551 number within major opcode number.
4553 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4555 * hppa-dis.c: Include libhppa.h.
4557 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4559 * mips-opc.c: Change dli to use M_DLI, and add dla.
4561 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4563 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4565 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4567 * mips-opc.c: Add r4650 mul instruction.
4569 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4571 * mips-opc.c: Add uld and usd macros for unaligned double load and
4574 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4576 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4577 mfdcr, mtdcr, icbt, iccci.
4579 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4581 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4582 signed char fields to shorts, more portable.
4584 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4586 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4587 char fields as signed chars, since they may have negative values.
4589 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4591 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4592 (mycroft@netbsd.org).
4594 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4596 From "Logg, Ed" <elogg@ea.com>:
4597 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4598 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4601 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4603 * ppc-opc.c: Changes based on patch from David Edelsohn
4604 <edelsohn@mhpcc.edu>.
4605 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4608 (insert_tbr): New static function.
4609 (extract_tbr): New static function.
4610 (XFXFXM_MASK, XFXM): Define.
4611 (XSPRBAT_MASK, XSPRG_MASK): Define.
4612 (powerpc_opcodes): Add instructions to access special registers by
4613 name. Add mtcr and mftbu.
4615 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4617 * mips-opc.c (P3): Define.
4618 (mips_opcodes): Add mad and madu.
4620 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4622 * configure.in: Add W65 support.
4623 * disassemble.c: Likewise.
4624 * w65-opc.h, w65-dis.c: New files.
4626 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4628 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4631 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4633 * mips-opc.c: Add dli as a synonym for li.
4635 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4637 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4638 print something for reserved opcode values, even if it won't
4641 * mips-dis.c (_print_insn_mips): When initializing, shift right
4642 and mask, to avoid sign extension problems on the Alpha.
4644 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4647 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4649 * sh-opc.h (mov.l gbr): Get direction right.
4650 * sh-dis.c (print_insn_shx): New function.
4651 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4652 print opcodes with right byte order.
4654 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4656 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4657 to avoid conflicts with getopt.
4659 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4661 * hppa-dis.c (print_insn_hppa): Read the instruction using
4662 bfd_getb32, so that it works on a little endian or 64 bit host.
4663 Remove unused local variable op.
4665 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4667 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4668 addu does not work correctly if -mips3.
4670 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4672 * a29k-dis.c (print_special): Add special register names defined
4673 on 29030, 29040 and 29050.
4674 (print_insn): Handle new operand type 'I'.
4676 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4678 * Makefile.in (INSTALL): Use top level install.sh script.
4680 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4682 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4683 that it works on a little endian host.
4685 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4687 * configure.in: Use ${config_shell} when running config.bfd.
4689 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4691 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4693 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4695 * a29k-dis.c (print_insn): Print the opcode.
4697 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4699 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4701 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4703 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4705 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4707 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4708 which store a value into memory.
4710 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4712 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4713 * arm-dis.c, arm-opc.h: New files.
4715 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4717 * Makefile.in (ns32k-dis.o): Add dependency.
4718 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4719 string, not as array of chars.
4721 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4723 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4725 * sparc-opc.c: Added sparclite extended FP operations, and
4726 versions of v9 impdep* instructions permitting specification of
4729 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4731 * i960-dis.c (reg_names): Now const.
4732 (struct sparse_tabent): New type, copied from array type in mem
4734 (ctrl): Local static array ctrl_tab now const.
4735 (cobr): Local static array cobr_tab now const.
4736 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4737 static variable mem_tab no longer explicitly initialized. Changed
4738 mem_init to const array of struct sparse_tabent.
4739 (reg): Local static variable reg_tab no longer explicitly
4740 initialized. Changed reg_init to const array of struct
4742 (ea): Local static array scale_tab now const.
4744 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4747 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4749 * configure.bat: the disassember needs to be enabled for
4750 "objdump -d" to work in djgpp.
4752 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4754 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4755 (invalid_float): Enabled general version, doesn't require running
4756 on ns32k host. Changed to take char* argument, and test for
4757 explicitly specified sizes, instead of using sizeof() on host CPU
4759 (INVALID_FLOAT): Cast first argument.
4760 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4761 list_P032, list_M032): Now const.
4762 (optlist, list_search): Made appropriate arguments now point to
4764 (print_insn_arg): Changed static array of one-character-string
4765 pointers into a static const array of characters; fixed sprintf
4766 statement accordingly.
4768 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4770 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4771 from distribution. A ns32k-dis.c from a previous distribution has
4772 been brought up to date and supports the new interface.
4774 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4776 * configure.in: add bfd_ns32k_arch target support.
4778 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4779 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4781 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4783 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4786 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4788 * h8300-dis.c, mips-dis.c: Don't use true and false.
4790 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4792 * configure.in: Change --with-targets to --enable-targets.
4794 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4796 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4797 opcodes to the first instruction with that opcode, to speed
4798 disassembly of large files. From ralphc@pyramid.com (Ralph
4801 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4805 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4807 * configure.bat: update to latest makefile.in
4809 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4811 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4812 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4813 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4814 slot insn is in a delay slot.
4815 * z8k-opc.h: (resflg): Fix patterns.
4816 * h8500-opc.h Fix CR insn patterns.
4818 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4821 "cmpl" before POWER versions, so that gas -many uses them.
4823 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4825 * disassemble.c: New file.
4826 * Makefile.in (OFILES): Add disassemble.o.
4827 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4828 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4829 binutils/configure.in.
4831 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4832 opcode being examined.
4834 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4836 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4837 (insert_ral, insert_ram, insert_ras): New functions.
4838 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4839 RAS for store with update.
4841 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4843 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4844 (edelsohn@npac.syr.edu).
4846 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4848 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4851 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4853 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4855 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4857 * ppc-opc.c (powerpc_operands): The signedp field has been
4858 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4859 instead. Add new operand SISIGNOPT.
4860 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4861 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4862 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4865 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4867 * i386-dis.c (struct private): Renamed to dis_private. `private'
4868 is a reserved word for dynix cc.
4870 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4872 * configure.in: Change error message to refer to bfd/config.bfd
4873 rather than bfd/configure.in.
4875 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4877 * ppc-opc.c: Define POWER2 as short alias flag.
4878 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4881 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4883 * i960-dis.c (print_insn_i960): Don't read a second word for
4884 opcodes 0, 1, 2 and 3.
4886 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4888 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4890 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * m68881-ext.c: Removed; no longer used.
4893 * Makefile.in: Changed accordingly.
4895 * m68k-dis.c (ext_format_68881): Don't declare.
4896 (print_insn_m68k): If an instruction uses place 'i', it uses at
4897 least four fixed bytes.
4898 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4899 extended float, convert to double using floatformat_to_double, not
4900 ieee_extended_to_double, and fetch the data before converting it.
4902 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4904 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4905 davidj@ICSI.Berkeley.EDU (David Johnson).
4907 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4909 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4910 PowerPC uses bdnz[l][a].
4912 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4914 * dis-buf.c, i386-dis.c: Include sysdep.h.
4916 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4918 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4920 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4921 by Motorola PowerPC 601 with PPC_OPCODE_601.
4922 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4923 Disassemble Motorola PowerPC 601 instructions as well as normal
4924 PowerPC instructions.
4926 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4928 * i960-dis.c (reg, mem): Just use a static array instead of
4931 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4933 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4934 condition name index if this is for a negated condition.
4936 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4937 Floating point format for 'H' operand is backwards from normal
4938 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4939 operands (fmpyadd and fmpysub), handle bizarre register
4940 translation correctly for single precision format.
4942 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4943 or 'I' operands if the next format specifier is 'M' (fcmp
4944 condition completer).
4946 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4948 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4949 single number giving a bitmask for the MB and ME fields of an M
4950 form instruction. Change NB to accept 32, and turn it into 0;
4951 also turn 0 into 32 when disassembling. Seperated SH from NB.
4952 (insert_mbe, extract_mbe): New functions.
4953 (insert_nb, extract_nb): New functions.
4954 (SC_MASK): Mask out SA and LK bits.
4955 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4956 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4957 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4958 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4959 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4960 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4961 (powerpc_macros): Define table of macro definitions.
4962 (powerpc_num_macros): Define.
4964 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4965 if PPC_OPERAND_NEXT is set.
4967 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4969 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4970 char. Retrieve contents using bfd_getl32 instead of shifting.
4972 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4974 * ppc-opc.c: New file. Opcode table for PowerPC, including
4975 opcodes for POWER (RS/6000).
4976 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4977 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4978 (CFILES): Add ppc-dis.c.
4979 (ppc-dis.o, ppc-opc.o): New targets.
4980 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4982 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4984 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4985 No space before 'u', 'f', or 'N'.
4987 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4989 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4990 farther than we should.
4992 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4994 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4996 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4998 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5000 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5001 needs it, to prevent reading past the end of a section.
5003 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5005 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5006 Removed t,A case for la; always use t,A(b) case.
5008 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5010 From Ted Lemen <mellon@pepper.ncd.com>
5011 * mips-dis.c (print_insn_arg): Handle 'k'.
5012 * mips-opc.c: Make cache use k, not t.
5014 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5016 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5017 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5018 FLOAT_FORMAT_CODE to put out floating point register names.
5020 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5022 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5024 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5026 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5028 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5031 larger than 32. Moved dsxx32 variants first for disassembler.
5033 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5035 * z8kgen.c, z8k-opc.h: Add full lda information.
5037 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5039 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5040 movb instructions. Any necessary space will be emitted by
5041 the code to handle nullification completers.
5043 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5045 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5047 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5049 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5050 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5052 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5054 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5056 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5058 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5059 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5061 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5063 * m88k-dis.c (m88kdis): comment change. Remove space after
5065 (printop): handle new arg types DEC and XREG for m88110.
5067 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5069 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5070 type for absolute branch addresses. Delete special
5071 "ble" and "be" code in 'W' operand code.
5073 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * mips-opc.c: Set hazard information correctly for branch
5076 likely instructions.
5078 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5080 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5081 info->fprintf_func for printing and info->print_address_func for
5084 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5086 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5088 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5090 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5091 Corrected second case of "b" for disassembler.
5093 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5095 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5096 to BFD swapping routines to correspond to BFD name changes.
5098 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5100 * mips-opc.c: Change div machine instruction to be z,s,t rather
5101 than s,t. Change div macro to be d,v,t rather than d,s,t.
5102 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5103 rem and remu which generates only the corresponding div
5104 instruction. This is for compatibility with the MIPS assembler,
5105 which only generates the simple machine instruction when an
5106 explicit destination of $0 is used.
5107 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5109 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5111 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5112 WR_31 hazard for bal, bgezal, bltzal.
5114 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5116 * hppa-dis.c (print_insn_hppa): Use print function
5117 from within the disassemble_info, not fprintf_filtered.
5119 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5121 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5122 Law, law@cs.utah.edu.)
5124 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5126 * mips-opc.c ("absu"): Removed.
5129 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5132 Changed hazard information to distinguish between memory load
5133 delays and coprocessor load delays.
5135 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5137 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5139 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5141 * configure.in: Don't pass cpu to config.bfd.
5143 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5145 * m88k-dis.c (m88kdis): Make class unsigned.
5147 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5149 * alpha-dis.c (print_insn_alpha): One branch format case was
5150 missing the instruction name.
5152 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5154 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5155 Add the arch-specific auxiliary files.
5156 (OFILES): Remove the arch-specific auxiliary files
5157 and use BFD_MACHINES instead of DIS_LIBS.
5158 * configure.in: Set BFD_MACHINES based on --with-targets option.
5160 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5162 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5165 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5167 * sparc-opc.c: Change CONST to const to deal with gcc
5168 -Dconst=__const -traditional.
5170 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5172 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5173 coprocessor instructions out of #if 0, and made them use new
5176 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5178 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5180 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5182 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5183 instruction, for use by the disassembler.
5185 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5186 hand-coded sign extensions that depended on 32-bit host ints.
5187 FIXME, we still depend on big-endian host bitfield ordering.
5188 (sparc_print_insn): Set the insn_info_valid field, and the
5189 other fields that describe the instruction being printed.
5191 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5193 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5194 `jmp' instead of just one of them.
5196 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5198 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5199 (fput_fp_reg_r): Renamed from fput_reg_r.
5200 (fput_fp_reg): New function.
5201 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5203 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5205 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5207 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5209 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5211 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5212 don't output a space.
5214 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5216 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5218 * mips-opc.c: New file, containing opcode table from
5219 ../include/opcode/mips.h.
5220 * Makefile.in: Add it.
5222 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5224 * m88k-dis.c: New file, moved in from gdb and changed to use the
5225 new dis-asm.h disassembler interface.
5226 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5227 (m88k-dis.o): New target.
5229 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5231 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5232 argument string const char * to correspond to opcode/mips.h.
5234 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5236 * mips-dis.c: Updated to account for name changes in new version
5238 * Makefile.in: Added header file dependencies.
5240 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5242 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5244 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5246 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5247 extend, rather than shifts.
5249 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5251 * Makefile.in: Undo 15 June change.
5253 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5255 * m68k-dis.c (print_insn_arg): Change return value to byte count
5257 * m68k-dis.c: Re-write to detect invalid operands before
5258 printing anything, so we can handle this the same way we
5259 handle invalid opcodes.
5261 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5263 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5265 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5267 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5270 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5272 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5274 * configure.in: Do make sysdep.h link.
5275 * Makefile.in: Search ../include. Don't search ../bfd.
5277 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5279 Changes from Jeff Law, law@cs.utah.edu:
5280 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5281 Do not print a space before the completers specified by
5284 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5286 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5287 defined, since gdb has been fixed.
5289 Changes from Jeff Law, law@cs.utah.edu:
5290 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5291 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5292 be a *disassemble_info, not a *FILE.
5293 * hppa-dis.c: Support 'd', '!', and 'a'.
5294 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5295 * hppa-dis.c: Delete cases which are no longer needed.
5297 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5299 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5301 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5303 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5306 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5308 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5309 * configure.in: No longer need to configure to get sysdep.h.
5311 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5313 * Patches from Jeffrey Law <law@cs.utah.edu>.
5314 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5315 templates for 1.1 FP computational instructions.
5317 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5319 * h8500-dis.c (print_insn_h8500): Address argument is type
5321 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5324 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5325 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5327 * sparc-dis.c (compare_opcodes): Move static declaration to
5330 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5332 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5333 instruction, remove unimp hack from 'l' argument.
5335 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5337 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5340 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5342 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5343 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5346 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5348 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5349 arrays of string pointers to 2-d arrays of chars, to save
5352 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5354 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5355 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5357 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5359 * hppa-dis.c: New file from Utah, adapted to new disassembler
5361 * Makefile.in: Include it.
5363 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5365 * sh-dis.c, sh-opc.h: New files.
5367 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5369 * alpha-dis.c, alpha-opc.h: New files.
5371 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5373 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5376 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5378 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5380 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5382 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5385 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5387 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5388 and double percent signs a few places.
5390 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5392 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5393 Use info->print_address_func not print_address.
5395 * dis-buf.c (generic_print_address): New function.
5397 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5399 * Makefile.in: Add sparc-dis.c.
5400 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5402 Add `add' instruction to the set that get checked
5403 for a preceding `sethi' in order to print an absolute address.
5404 * (print_insn): Disassembly prefers real instructions.
5405 (is_delayed_branch): Speed up.
5406 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5407 Still missing some float ops, and needs testing.
5408 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5409 F_ALIAS. Use printf, not fprintf, when not passing a file
5411 (compare_opcodes): Check that identical instructions have
5412 identical opcodes, complain otherwise.
5415 * Include reg_names.
5417 Use dis-asm.h/read_memory_func interface.
5419 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5421 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5422 deliberately return non-zero to setjmp from longjmp. Otherwise
5423 this code fails to compile.
5425 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5427 * m68k-dis.c: Fix prototype for fetch_arg().
5429 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5431 * dis-buf.c: New file, for new read_memory_func interface.
5432 Makefile.in (OFILES): Include it.
5433 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5434 Use new read_memory_func interface.
5436 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5438 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5439 * h8500-opc.h: Fix couple of opcodes.
5441 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5443 * Makefile.in: add dvi & installcheck targets
5445 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5447 * Makefile.in: Update for h8500-dis.c.
5449 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5451 * h8500-dis.c, h8500-opc.h: New files
5453 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5455 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5456 ../include/dis-asm.h.
5457 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5458 and ../gdb/m68k-pinsn.c).
5459 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5460 and ../gdb/i386-pinsn.c).
5461 * m68881-ext.c: New file. Moved definition of
5462 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5463 * Makefile.in: Adjust for new files.
5464 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5465 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5466 can be dis-assembled.
5468 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5470 * mips-dis.c (print_insn_arg): Now returns void.
5472 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5474 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5475 files that use the macros.
5477 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5479 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5480 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5481 (CFILES): Added mips-dis.c.
5483 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5485 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5486 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5488 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5490 * Makefile.in: Improve *clean rules.
5491 * configure.in: Allow a default host.
5493 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5495 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5496 files include other sysdep files
5498 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5500 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5502 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5504 * configure.in: For host support, use ../bfd/configure.host
5505 so it stays in sync with the ../bfd/hosts database.
5507 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5509 * configure.in: use cpu-vendor-os triple instead of nested cases
5511 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5513 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5514 *always* the wrong one.
5516 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5518 * z8kgen.c: added copyright info
5520 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5522 * z8k-dis.c (unparse_instr): prettier tabs
5523 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5525 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5527 * configure.in: Add ncr* configuration.
5528 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5529 picayune ANSI compilers happy.
5531 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5533 * configure.in (i386): Make i386 and i486 synonymous for now.
5534 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5536 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5538 * Makefile.in (install): Fix typo.
5540 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5542 * Makefile.in (make): Remove obsolete crud.
5543 (sparc-opc.o): Avoid Sun Make VPATH bug.
5545 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5547 * Makefile.in: since there are no SUBDIRS, remove rule and
5548 references of subdir_do.
5550 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5552 * Makefile.in (install): Get the library name right here too.
5553 Don't install bfd.h, since it's unrelated to this library. No
5554 subdirs to recurse into, either.
5555 (CFILES): The source file has a .c suffix, not .o.
5557 * sparc-opc.c: New file, moved from BFD.
5558 * Makefile.in (OFILES): Build it.
5560 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5562 * z8k-dis.c: fixed forward refferences of some declarations.
5564 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5566 * Makefile.in: get the name of the library right
5568 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5570 * z8k-dis.c: knows how to disassemble z8k stuff
5571 * z8k-opc.h: new file full of z8000 opcodes
5575 version-control: never
projects / external / binutils.git / blob