1 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
3 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
5 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
7 * m32r-opc.h,m32r-opc.c: Regenerate.
10 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
12 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
15 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
17 * i386-dis.c (OP_3DNowSuffix): New static function.
20 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
21 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
22 (insn_codep): New static variable.
23 (print_insn_x86): Init insn_codep after prefixes.
24 (grps): Add GRP14 entries for prefetch, prefetchw.
27 From Jeff B Epler <jepler@usgs.gov>
28 * i386-dis.c (Suffix3DNow): New table.
30 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
32 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
34 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
36 * d10v-dis.c (print_operand): If num is nonzero, then
37 add OPERAND_ACC1, not OPERAND_ACC0.
39 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
41 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
44 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
46 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
50 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
52 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
55 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
57 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
59 start-sanitize-nortel-ppc750
60 1998-09-09 Michael Meissner <meissner@cygnus.com>
62 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
65 end-sanitize-nortel-ppc750
66 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
68 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
70 (print_insn_little_arm): Detect Thumb symbols in elf object
73 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
75 * alpha-dis.c (print_insn_alpha): Use the machine type to
76 decide which PALcode set to include.
78 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
80 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
82 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
84 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
85 MSUB and MSUBS instructions.
88 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
90 * mips-opc.c: Insert contents of vu0.h, rather than including it.
92 * Makefile.am: Rebuild dependencies.
96 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
98 * ppc-opc.c (powerpc_operands): Omit parens around additions in
101 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
103 start-sanitize-coldfire
104 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
105 ColdFire, as below for mulsl and mulul.
107 end-sanitize-coldfire
108 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
109 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
110 +, -, and d for ColdFire.
112 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
113 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
114 (extract_mbe): Likewise.
116 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
118 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
120 * m10300-opc.c: First cut at UDF instructions.
122 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
124 * m32r-opc.c: Regenerate (remove semantic descriptions).
126 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
128 * arm-dis.c (print_insn_big_arm): Fix indentation.
129 (print_insn_little_arm): Likewise.
131 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
133 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
135 (print_insn_little_arm): Likewise.
137 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
139 Move all global state data into opcode table struct, and treat
140 opcode table as something that is "opened/closed".
141 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
142 (cgen_asm_init): Delete.
143 (cgen_set_parse_operand_fn): New function.
144 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
145 (cgen_dis_init): Delete.
146 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
147 (cgen_current_{opcode_table_mach,endian}): Delete.
148 start-sanitize-cygnus
149 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
150 * cgen-dis.in (all fns): Ditto.
151 * cgen-opc.in (all fns): Ditto.
153 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
155 start-sanitize-cygnus
156 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
158 * cgen-dis.in (print_normal): Split into two.
159 (print_address): New function.
160 (extract_insn_normal): Clarify insn_value arg.
161 (print_int_insn): Renamed from print_insn.
162 (print_insn): New arg.
163 (print_insn_@arch@): Open opcode table if not already done so.
164 Move reading of insn into print_insn.
167 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
169 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
173 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
175 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
176 accept an accumulator choice.
177 * m32r-opc.c,m32r-opc.h: Regenerate.
180 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
182 * m10300-opc.c: Add entries for "no_match_operands" field in
186 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
188 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
192 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
194 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
197 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
199 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
201 * m10300-opc.c: Add autoincrement memory loads/stores.
205 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
207 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
208 phmsubh respectively.
211 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
213 start-sanitize-cygnus
214 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
216 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
217 @arch_cgen_get_int_operand.
218 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
219 Update call to @arch@_cgen_insert_operand.
220 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
221 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
222 (extract_insn_normal): New arg `pc', callers updated.
223 Update call to @arch@_cgen_extract_operand.
224 (print_insn): Update call to CGEN_EXTRACT_FN.
226 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
229 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
231 * m10300-opc.c: Fix load to sp and store from sp for the am33.
232 Add more multimedia instructions.
234 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
236 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
241 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
243 * mips-opc.c (pref): Enabled for the r5900.
246 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
248 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
250 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
252 (OP_J): Remove unnecessary subtraction when 16-bit displacement
253 will be masked later.
256 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
258 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
261 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
263 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
264 from raw register #s to symbolic names to make debugging easier.
267 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
269 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
271 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
273 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
274 start-sanitize-cygnus
275 * Makefile.am (CGENDIR): Set via configure.
276 (CGEN): New variable.
277 (CGENFILES): object.scm renamed to cos.scm.
278 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
279 (stamp-m32r): Pass prefix to run-cgen.
280 * Makefile.in: Regenerate.
281 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
282 * cgen-dis.in: Ditto.
283 * cgen-opc.in: Ditto.
284 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
285 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
286 * configure: Regenerate.
290 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
292 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
294 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
296 * m10300-opc.c: Reorder more instructions so that we do not
297 accidentally match a mn10300 instruction when we really
298 wanted an am33 instruction.
301 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
303 * m10300-dis.c: Only recognize instructions from the currently
305 * m10300-opc.c: Add field indicating the particular variant of
306 the mn10300 each instruction is available on.
308 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
310 * configure.in: For bfd_vax_arch, build vax-dis.lo.
311 * Makefile.am: Rebuild dependencies.
312 (CFILES): Add vax-dis.c.
313 (ALL_MACHINES): Add vax-dis.lo.
314 * aclocal.m4: Rebuild with current libtool.
315 * configure, Makefile.in: Rebuild.
317 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
319 * vax-dis.c: New file, from work by Pauline Middelink
320 <middelin@polyware.iaf.nl>.
321 * disassemble.c (ARCH_vax): Define if ARCH_all.
322 (disassembler): Add case for ARCH_vax.
323 * makefile.vms: Support compilation on vms/vax.
326 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
328 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
329 the DVP_OPERAND_RELOC_11_S4 relocation.
333 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
335 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
337 (disassemble): Correctly handle FMT_D10 instructions.
339 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
340 am33 shift instructions.
342 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
344 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
345 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
347 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
348 (mn10300_opcodes): Reorder so as to try and select opcodes from
349 the core chip when multiple alternatives exist. Change several
350 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
351 "macbu" instructions. Fix typos in a couple DSP instructions too.
354 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
356 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
357 related to sign extension and the size of ints.
359 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
361 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
362 instructions. Support (sp) addressing mode by expanding it into
366 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
368 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
369 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
370 be used as immediate values.
374 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
376 * m10300-opc.c: Support 4 byte DSP instructions.
379 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
381 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
384 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
386 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
389 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
391 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
394 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
396 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
397 found on the mn10300.
400 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
402 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
405 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
407 * mips-dis.c (print_insn_little_mips): Previously, instruction
408 printing references the symbol table to determine whether the
409 instruction resides in a block regular instructions or mips16
410 instructions. However, when the disassembler gets used in other
411 environments where the symbol table is not present, we no longer
412 rely in the symbol table, rather, use the low bit of the
413 instructions address to guess. There should be no change for usage
414 of the disassembler in host based programse, gdb ,objdump.
415 (print_insn_big_mips): ditto.
416 (print_insn_mips): ditto
418 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
420 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
422 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
425 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
426 operands for the am33.
427 (mn10300_opcodes): Add new instructions from the am33.
429 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
431 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
433 * i386-dis.c (index16): Add '%' to register names. Use ','
436 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
438 * i386-dis.c: Don't print opcode suffix when we can figure out the
439 size (and gas can!) by register operands, or from the default
441 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
443 (dis386, dis386_twobyte, grps): Use new suffix macros.
444 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
445 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
446 order of cmps operands to agree with Intel docs. Correct operand
447 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
448 agree with Intel docs.
449 (print_insn_x86): Print orphan fwait before other prefixes.
450 Return correct byte count for orphan fwait with prefixes. Don't
451 print `bound' operands in reverse order.
452 (ckprefix): Stop accumulating prefixes if we get fwait.
453 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
455 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
457 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
458 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
460 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
462 Fix problems when bfd_vma is wider than long.
463 * i386-dis.c: Make op_address and start_pc unsigned.
464 (set_op): Make parameter unsigned.
465 (print_insn_x86): Cast to bfd_vma when passing a value to
467 * ns32k-dis.c (CORE_ADDR): Don't define.
468 (print_insn_ns32k): Change type of addr to bfd_vma. Use
469 bfd_scan_vma to read back address.
470 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
472 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
473 (NEXTULONG): New definition.
474 (print_insn_m68k): Avoid overflow when computing third argument of
476 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
477 Use disp instead of val to store offset values.
478 (print_indexed): Use base_disp instead of word to store base
479 displacement, to avoid overflow.
480 * m10300-dis.c (disassemble): Cast value to long when computing
481 pc-relative address, to get correct sign extension.
483 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
485 * m32r-opc.c: Regenerate.
487 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
489 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
490 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
492 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
494 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
496 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
498 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
500 (OP_DSreg): Rename from OP_DSSI.
501 (OP_ESreg): Rename from OP_ESDI.
502 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
504 (append_seg): Rename from append_prefix.
505 (ptr_reg): New function.
506 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
508 (PREFIX_ADDR): Rename from PREFIX_ADR.
509 (float_reg): Add non-broken opcodes for people who don't want
512 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
514 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
517 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
519 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
521 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
523 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
524 0; produce error message for shifts of size 32 (or 64 for 64-bit
525 shifts), because the hardware doesn't support them.
528 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
530 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
533 * vu0.h (sqc2): Fix opcode.
535 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
539 start-sanitize-cygnus
540 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
542 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
543 Change pinfo to use WR_HILO.
546 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
548 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
549 LONG_2, LONG_2b formats to use this new operand.
551 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
553 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
555 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
557 * sparc-dis.c (print_insn_sparc): big endian instruction / little
560 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
562 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
563 and SHORT_B3b formats to use Rb instead of Ra.
565 Add FLAG_MUL16 to MUL2XH opcode.
567 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
568 to existing 1.1.1 parallelisation prohibition procedure.
570 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
572 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
573 * cgen-dis.in (extract_normal): Likewise.
574 * m32r-asm.c,m32r-dis.c: Regenerate.
577 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
579 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
583 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
585 * mips-opc.c (multu1): Add two operand variant for the r5900.
588 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
590 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
591 with a shift count of 0.
594 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
596 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
598 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
600 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
601 (_print_insn_mips): Likewise.
602 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
606 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
608 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
609 (cgen_hw_lookup_by_num): New function.
612 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
615 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
617 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
619 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
621 * sparc-dis.c (print_insn_sparc): Always fetch instructions
622 as big-endian on SPARClite.
625 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
627 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
629 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
633 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
635 * d30v-opc.c (pre_defined_register): Remove alias for r0.
638 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
640 * mips-opc.c (break): Added 20-bit single-operand break
641 instruction for R5900 only.
644 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
646 * po/Make-in (install-info): New target.
648 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
650 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
651 * configure: Rebuild.
653 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
655 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
656 variety of ISA2 instructions to set bottom ten bits of trap code.
658 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
660 * Makefile.am (config.status): Add explicit target so that
661 config.status depends upon bfd/configure.in.
662 * Makefile.in: Rebuild.
664 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
666 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
667 instructions to set bottom ten bits of break code.
668 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
669 for above optional argument.
671 start-sanitize-cygnus
672 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
674 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
675 * m32r-opc.h: Regenerate.
678 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
680 * makefile.vms: Run dec c with /nodebug.
682 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
684 * Makefile.in: Rebuilt.
685 * Makefile.am: Regenerated dependencies with mkdep.
687 * opintl.h (_): Define as dgettext.
689 start-sanitize-cygnus
690 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
692 * configure.in: Add support for --enable-cgen-maint.
693 * Makefile.am (M32R_DEPS): New variable.
694 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
695 * aclocal.m4: Regenerate.
696 * Makefile.in: Regenerate.
697 * configure: Regenerate.
699 * Makefile.am (CGENFILES): Add minsn.scm.
702 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
704 * cgen-asm.c: Internationalised.
705 start-sanitize-cygnus
706 * cgen-asm.in: Internationalised.
707 * cgen-opc.in: Internationalised.
709 * m32r-asm.c: Internationalised.
710 * m32r-dis.c: Internationalised.
711 * m32r-opc.c: Internationalised.
713 * aclocal.m4: Regenerated.
714 * configure: Regenerated.
715 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
716 * Makefile.in: Rebuild.
717 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
718 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
720 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
722 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
724 * aclocal.m4, configure: Rebuild with current tools.
726 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
728 * opintl.h: New file - contains internationalisation macros used
729 by source files in this directory.
730 * po/: New subdirectory - contains internationalisation files.
731 * po/Make-in: New file - Makefile constructor.
732 * po/POTFILES.in: New file - list of files in opcodes directory
733 that should be scan for internationalisation macros.
734 * po/opcodes.pot: New file - list of internationisation strings
735 found in files mentioned in po/POTFILES.in.
736 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
737 entry. Add intl directory to include paths.
738 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
739 HAVE_STRCPY, HAVE_LC_MESSAGES
740 * configure.in: Add rule to build Makefile in po subdirectory.
741 * Makefile.in: Rebuilt.
742 * aclocal.m4: Rebuilt.
743 * config.in: Rebuilt.
744 * configure: Rebuilt.
745 * alpha-opc.c: Internationalised.
746 * arc-dis.c: Internationalised.
747 * arc-opc.c: Internationalised.
748 * arm-dis.c: Internationalised.
749 * cgen-asm.c: Internationalised.
750 * d30v-dis.c: Internationalised.
751 * dis-buf.c: Internationalised.
753 * dvp-dis.c: Internationalised.
754 * dvp-opc.c: Internationalised.
756 * h8300-dis.c: Internationalised.
757 * h8500-dis.c: Internationalised.
758 * i386-dis.c: Internationalised.
759 * m10200-dis.c: Internationalised.
760 * m10300-dis.c: Internationalised.
761 * m68k-dis.c: Internationalised.
762 * m88k-dis.c: Internationalised.
763 * mips-dis.c: Internationalised.
764 * ns32k-dis.c: Internationalised.
765 * opintl.h: Internationalised.
766 * ppc-opc.c: Internationalised.
767 * sparc-dis.c: Internationalised.
768 * v850-dis.c: Internationalised.
769 * v850-opc.c: Internationalised.
771 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
773 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
774 (asm_hash_table_entries): New variable.
775 (cgen_asm_init): Free asm_hash_table_entries.
776 (hash_insn_array,hash_insn_list): New functions.
777 (build_asm_hash_table): Use them. Hash macro insns as well.
778 (cgen_asm_lookup_insn): Update.
779 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
780 (dis_hash_table_entries): New variable.
781 (cgen_dis_init): Free dis_hash_table_entries.
782 (hash_insn_array,hash_insn_list): New functions.
783 (build_dis_hash_table): Use them. Hash macro insns as well.
784 (cgen_dis_lookup_insn): Update.
785 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
786 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
787 (cgen_macro_insn_count): New function.
788 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
789 All callers updated. Sanity check result of extract fn.
790 (@arch@_cgen_get_insn_operands): Change result type to void.
791 Delete args insn_value, length. New arg fields. All callers updated.
792 (@arch@_cgen_lookup_get_insn_operands): New function.
793 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
795 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
797 * i386-dis.c (OP_DSSI): Print segment override.
800 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
802 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
806 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
808 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
812 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
814 * vu0.h (vlqd, vlqi): Update per revised specs.
818 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
820 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
821 (vif_operands): Update.
822 (vif_get_unpackloc): Delete.
823 (state_vif_unpackloc{,_star_p}): Delete.
824 (dvp_opcode_init_parse): Update.
825 (vif_unpack_len_value): Avoid divide by zero.
829 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
831 * vu0.h: Specs changed for VCALLMSR bit pattern.
832 * mips-dis.c: (print_insn_arg) Matching change.
835 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
837 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
840 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
842 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
843 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
844 * configure.in: Define and substitute WIN32LDFLAGS and
846 * aclocal.m4: Rebuild with new libtool.
847 * configure, Makefile.in: Rebuild.
850 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
852 * vu0.h: Corrected bit pattern for VMAXI opcode.
855 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
857 * m32r-opc.c: Regenerate.
860 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
862 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
863 (dvp_expand_macro): Implement.
864 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
865 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
868 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
870 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
871 before trying to copy it.
872 * Makefile.in: Rebuild.
874 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
876 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
879 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
881 * m32r-opc.c: Fix bit patterns for SAT and SATB.
884 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
886 * ns32k-dis.c (bit_extract_simple): New function to extract bits
887 from an arbitrary valid buffer instead of fetching them on demand
889 (invalid_float): use bit_extract_simple() instead of bit_extract().
892 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
894 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
895 * m32r-opc.h: Add extra control registers.
898 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
900 From H.J. Lu <hjl@gnu.org>:
901 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
904 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
906 * Branched binutils 2.9.
908 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
910 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
911 disassembling last 4 bytes of a section.
913 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
915 Fix some gcc -Wall warnings:
916 * arc-dis.c (print_insn): Add casts to avoid warnings.
917 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
918 * d10v-dis.c (dis_long, dis_2_short): Likewise.
920 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
921 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
922 (parse_bc, parse_vfreg, parse_accdest): Likewise.
923 (parse_ffstreg, parse_vif_mode): Likewise.
925 * m10200-dis.c (disassemble): Likewise.
926 * m10300-dis.c (disassemble): Likewise.
927 * ns32k-dis.c (print_insn_ns32k): Likewise.
928 * ppc-opc.c (insert_ral, insert_ram): Likewise.
929 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
930 * cgen-opc.c (cgen_keyword_search_next): Likewise.
931 * d10v-dis.c (dis_long, dis_2_short): Likewise.
932 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
934 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
935 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
936 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
938 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
940 * tic80-dis.c (print_one_instruction): Likewise.
942 * w65-dis.c (print_operand): Likewise.
943 * z8k-dis.c (fetch_data): Likewise.
944 * a29k-dis.c: Add return type for find_byte_func_type.
945 * arc-opc.c: Include <stdio.h>. Remove declarations of
946 insert_multshift and extract_multshift.
947 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
949 (extract_value): Fully parenthesize expression.
951 * dvp-opc.c: Include <ctype.h>.
952 (print_sdest): Add default case to switch.
954 * h8500-dis.c (print_insn_h8500): Initialize local variables.
955 * h8500-opc.h (h8500_table): Fully bracket initializer.
956 * w65-opc.h (optable): Likewise.
957 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
958 * i386-dis.c (OP_E): Initialize local variables.
959 * m10200-dis.c (print_insn_mn10200): Likewise.
960 * mips-dis.c (print_insn_mips16): Likewise.
961 * sh-dis.c (print_insn_shx): Likewise.
962 * v850-dis.c (print_insn_v850): Likewise.
963 * ns32k-dis.c (print_insn_arg): Declare.
964 (get_displacement, invalid_float): Declare.
965 (list_search, sign_extend, flip_bytes): Declare return type.
966 (get_displacement): Likewise.
967 (print_insn_arg): Likewise. Make d int. Fix sprintf format
969 (print_insn_ns32k): Make i unsigned.
970 (invalid_float): Make static. Declare type of val.
971 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
972 on each for iteration.
973 * tic30-dis.c (get_indirect_operand): Likewise.
974 * z8k-dis.c (print_insn_z8001): Declare return type.
975 (print_insn_z8002): Likewise.
976 (unparse_instr): Fix sprintf format strings.
978 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
980 * mips-opc.c: Add "sync.l" and "sync.p".
983 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
985 * dvp-opc.c (extract_vif_datalen): Rewrite.
986 (vif_insn_len): Perform 0->max+1 conversion for direct length.
988 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
990 * dvp-dis.c (print_insn): Print unpack address in hex.
991 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
992 Don't skip over '*', just record it.
993 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
994 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
995 Don't skip over '*', just record it.
996 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
997 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
998 (vif_opcodes): Likewise.
999 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1000 (vif_macros,vif_macro_count): New globals.
1001 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1002 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1003 (vif_get_wl_cl): New function.
1004 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1007 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1009 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1010 default m68k variant to recognize.
1012 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1013 (ctrl, cobr, mem, ea): Likewise.
1014 (print_addr): Likewise. Remove cast.
1015 (ea): Cast argument of print_addr to bfd_vma.
1017 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1019 (cgen_parse_unsigned_integer): Likewise.
1020 (cgen_parse_address): Likewise.
1022 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1024 * i960-dis.c (ctrl): Add full braces to structure initialization.
1025 (cobr, mem, reg): Likewise.
1026 (ea): Correct parenthesization in expression.
1028 * cgen-asm.c: Include <ctype.h>.
1029 (build_asm_hash_table): Remove unused local variable i.
1030 (cgen_parse_keyword): Add casts to avoid warnings.
1032 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1033 symbol. Fix indentation.
1034 (print_insn_little_arm): Likewise.
1036 start-sanitize-r5900
1037 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1039 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1043 start-sanitize-m32rx
1044 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1046 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1051 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1053 * dvp-opc.c (vif_operand_datalen_special): New global.
1056 start-sanitize-r5900
1057 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1059 * vu0.h (vcallms): Use 'O' for call target operand.
1060 * mips-dis.c (print_insn_arg): Handle 'O'.
1063 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1065 * configure.in: Use AM_DISABLE_SHARED.
1066 * aclocal.m4, configure: Rebuild with libtool 1.2.
1068 start-sanitize-r5900
1069 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1071 * mips-dis.c: Change '%' to '#' in r5900 support.
1075 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1077 These patches are courtesy of Jonathan Walton and Tony Thompson
1078 (athompso@cambridge.arm.com).
1080 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1083 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1084 both the offset and the label closest to the destination.
1086 start-sanitize-r5900
1087 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1089 * vu0.h: New file with cop2/vu0 instructions.
1090 * mips-opc.c: Include vu0.h.
1091 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1093 (print_insn_mips): Do not emit a tab after an instruction if the
1094 first arg is an instruction completer (&). If the next arg is an
1095 escape character (%), then print the next arg verbatim.
1096 * Makefile.am (mips-opc.lo): Depend on vu0.h
1100 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1102 * dvp-opc.c (vif_opcodes): Add stcycl.
1104 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1106 * dvp-dis.c (print_dma): Change length from 16 to 8.
1109 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1111 * m32r-opc.h: Regenerate.
1114 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1116 * dvp-opc.c (print_dest1): Print dest spec again.
1117 (print_vfreg,print_accdest): Likewise.
1118 (vif_unpack_len): Round result up to word boundary.
1121 start-sanitize-vr4320
1122 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1124 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1126 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1128 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1133 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1135 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1136 (print_insn): Do mask comparison on proper opcode word.
1137 Print unsigned values in hex.
1138 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1139 (parse_bc): Catch missing dest.
1140 (parse_vfreg): Replace atoi call with strtol.
1141 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1142 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1143 (extract_gif_eop): New function.
1144 (gif_operands): Update eop entry.
1145 (VGIFOP,VGIFNREGS): Fix calcs.
1146 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1147 (gif_regs): Add entry for unused 11 case.
1148 (print_gif_regs): Print empty list instead of nothing.
1149 (extract_gif_nloop): Fix value calc.
1150 (print_gif_nloop): Always print value, even if 0.
1151 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1152 (vif_operands): Use them for wl,cl fields.
1153 (state_vif_wl,state_vif_cl): New static locals.
1154 (parse_vif_mode): Handle numeric args.
1155 (vif_unpack_len_value,vif_unpack_len): New functions.
1156 (vif_insn_len): Call vif_unpack_len.
1159 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1161 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1163 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1165 * cgen-asm.in: Move insertion of generated routines to top of file.
1166 (insert_normal): Add prototype. Delete `shift' arg.
1167 * cgen-dis.in: Move insertion of generated routines to top of file.
1168 (extract_normal): Add prototype. Delete `shift' arg.
1169 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1170 (print_keyword): Add prototype. Fix type of `attrs' arg.
1172 start-sanitize-vr4320
1173 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1175 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1176 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1179 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1181 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1182 assume that info->symbols is non-empty.
1184 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1186 * alpha-opc.c (cvtqs) There is no such thing.
1187 (cvttq): Missing most of the /*d variants.
1189 start-sanitize-r5900
1190 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1192 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1194 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1195 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1198 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1200 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1201 delayed branches or jumps.
1204 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1206 * dvp-opc.c (vif_operands): Add unpack[u] support.
1207 (vif_opcodes): Ditto.
1208 (*_vif_imrubits): Renamed from *_vif_imrbits.
1210 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1212 * dvp-dis.c (print_insn): Handle word number.
1213 Handle mips address vs vu address.
1214 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1215 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1216 ({insert,extract}_dma_addr): Fix word ofset.
1217 ({insert,print}_gif_regs): Fix encode/decode.
1220 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1224 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1225 * tic30-dis.c (print_branch): Likewise.
1227 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1228 * dvp-dis.c (dvp_info_mach_type): New function.
1229 (print_insn_dvp): Call it.
1230 (print_vif): Return length of 4 if mpg or direct insn so following
1231 insns get properly disabled.
1232 (print_gif): Fix word order.
1233 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1234 (gif_operands): Fix word order.
1235 (gif_opcodes): Likewise.
1236 ({insert,extract,print}_gif_regs): Likewise.
1237 (gif_regs): Add new register number/name changes.
1238 (dma_opcodes): Add dmarefe insn.
1241 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1243 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1244 saved_symbol code as it is no longer needed.
1246 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1248 * cgen-asm.c: Include symcat.h.
1249 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1251 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1254 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1256 * dvp-opc.c (extra_dma_flags): Fix typos.
1257 (dma_operands): Fix word numbers.
1258 (dma_opcodes): Likewise.
1259 ({insert,extract}_dma_flags): Likewise.
1262 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1264 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1267 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1269 * dvp-dis.c (print_gif): Complete.
1270 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1271 (state_gif_{nregs,regs,nloop}): New static locals.
1272 (*_gif_*): Complete.
1273 (dvp_opcode_init_{parse,print}): Init gif state locals.
1274 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1275 (vif_insn_len): Handle `unpack'.
1276 ({insert,extract}_dma_flags): Complete.
1279 start-sanitize-r5900
1280 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1282 * mips-opc.c (mula.s): Renamed from multa.s.
1285 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1287 * m32r-opc.[ch]: Regenerate.
1290 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1292 * dvp-opc.c (dma_operands): Rewrite.
1293 (dma_operand_{count,addr}): New globals.
1294 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1295 (insert_dma_addr): Insert value into insn.
1296 (extract_dma_addr): Extract value from insn.
1298 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1300 * dvp-dis.c (print_vu): Handle loi insns.
1301 (print_insn): Likewise.
1302 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1303 (vu_operands): Make LDEST1 a FAKE operand.
1304 (parse_dest1): Allow elided argument.
1305 (print_dest1): Don't print the argument.
1307 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1309 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1310 (print_vfreg): Don't print dest spec.
1311 (parse_accdest): Dest spec is optional.
1312 (print_accdest): Don't print dest spec.
1315 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1317 * Makefile.am (CGENFILES): Update.
1318 * Makefile.in: Regenerate.
1319 * cgen-asm.in (insert_normal): Result is error message now.
1320 Validate value to be inserted.
1321 (insert_insn_normal): Result is error message now.
1322 (@arch@_cgen_assemble_insn): Update.
1323 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1324 arguments. Don't perform validation here.
1325 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1327 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1329 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1330 operand instance list.
1331 * m32r-opc.c: Regenerate.
1333 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1335 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1336 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1338 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1340 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1342 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1344 * configure.in: Get the version number from BFD.
1345 * configure: Rebuild.
1347 From H.J. Lu <hjl@gnu.org>:
1348 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1349 * Makefile.in: Rebuild.
1351 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1353 * m32r-opc.c: Regenerate.
1354 * m32r-opc.h: Regenerate.
1356 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1358 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1359 Ignore ALIAS insns if asked to.
1360 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1361 * m32r-opc.c: Regenerate.
1364 * dvp.opc.c: Nicely format opcode tables.
1365 (vu_operands): New element UFLAGS.
1366 (parse_uflags,print_uflags): New functions.
1367 (vu_upper_opcodes): Add UFLAGS to all insns.
1370 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1372 Fix rac to accept only a0:
1373 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1374 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1375 Introduce OPERAND_GPR.
1376 * d10v-dis.c (print_operand): Likewise.
1378 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1380 * cgen-opc.in: New file.
1381 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1382 * Makefile.am (CGENFILES): Add cgen-opc.in.
1383 * Makefile.in: Regenerate.
1385 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1386 (cgen_hw_lookup): Make result const.
1388 * cgen-dis.in (*): Use PTR instead of void *.
1389 (print_insn): Delete unused vars `i', `syntax'.
1391 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1394 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1396 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1397 (vif_opcodes): Update renamed insns.
1398 * dvp-dis.c (*): Likewise.
1401 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1403 * configure, aclocal.m4: Rebuild with new libtool.
1405 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1407 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1408 instructions use a PC relative branch, not absolute.
1410 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1412 * configure.in: Set libtool_enable_shared rather than
1413 libtool_shared. Remove diversion hack.
1414 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1416 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1418 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1419 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1421 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1423 * tic30-dis.c: New file.
1424 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1425 * configure.in: Handle bfd_tic30_arch.
1426 * Makefile.am: Rebuild dependencies.
1427 (CFILES): Add tic30-dis.c
1428 (ALL_MACHINES): Add tic30-dis.lo.
1429 * configure, Makefile.in: Rebuild.
1431 start-sanitize-m32rx
1432 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1434 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1435 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1436 macwhi-a and macwlo-a instructions.
1440 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1442 * dvp-opc.c, fixed encoding of a bunch of instructions to
1443 be consistent with the asmvu assembler (and inconsistent
1444 with the specification).
1446 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1448 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1449 in the opcode table. The pkemscalf instruction must come first.
1451 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1453 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1456 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1458 * m32r-opc.h (HAVE_CPU_M32R): Define.
1461 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1463 * dvp-dis.c, dvp-opc.c: New files.
1464 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1465 * configure: Regenerate.
1466 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1467 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1468 (mips-dis.lo): Compile with @archdefs@.
1469 * Makefile.in: Regenerate.
1470 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1471 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1474 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1476 * v850-opc.c (insertion routines): If both alignment and size is
1477 wrong then report this.
1479 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1481 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1482 Only recognize instructions for the current target_processor.
1484 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1486 * d10v-dis.c (PC_MASK): Correct value.
1487 (print_operand): If there's a reloc, don't calculate the
1488 address because they could be in different sections.
1490 start-sanitize-cygnus
1491 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1493 * cgen.sh: Rewrite to be like simulator's version.
1494 * Makefile.am (cgen): Update call to cgen.sh.
1495 * Makefile.in: Regenerate
1498 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1500 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1501 instruction after the 4650's "mul" instruction; nobody's using the
1502 4010 these days. If object files someday indicate which processor
1503 variant they're intended for, we can do a better job at this.
1505 start-sanitize-r5900
1506 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1508 * mips-opc.c (c.lt.s): Add r5900 variant.
1512 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1514 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1515 table provided entry size. Use CGEN_INSN_MNEMONIC.
1516 (cgen_parse_keyword): Rewrite.
1517 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1518 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1519 * cgen-opc.c: Clean up pass over `struct foo' usage.
1520 (cgen_keyword_lookup_value): Handle "" entry.
1521 (cgen_keyword_add): Likewise.
1522 start-sanitize-cygnus
1523 * Makefile.am: Add cgen support.
1524 * Makefile.in: Regenerate.
1525 * configure.in: Add cgen support.
1526 * configure: Regenerate.
1527 * aclocal.m4: Regenerate.
1528 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1531 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1533 * mips-opc.c: Add FP_D to s.d instruction flags.
1535 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1537 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1539 start-sanitize-tic80
1540 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1542 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1543 PC relative offset forms before the 15 bit forms. An assembler command
1544 line option now chooses the default.
1547 start-sanitize-r5900
1548 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1550 * mips-opc.c: Add many missing r5900 instructions.
1553 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1555 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1556 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1558 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1560 * configure: Only build libopcodes shared if --enable-shared's value
1561 was `yes', or was set to `*opcodes*'.
1562 * aclocal.m4: Likewise.
1563 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1564 original source of this bit of code. It's not clear what the best fix
1567 start-sanitize-r5900
1568 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1570 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1572 start-sanitize-tic80
1573 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1575 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1576 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1577 offset forms before the 15 bit forms, to default to the long forms.
1580 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1582 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1584 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1586 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1587 symbol if none is present.
1588 (print_insn_big_arm): Prevent examination of stored symbol if
1591 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1593 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1595 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1597 * disassemble.c: Remove disasm_symaddr() function.
1599 * arm-dis.c: Use info->symbol instead of info->flags to determine
1600 if disassmbly should be in Thumb or Arm mode.
1602 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1604 * arm-dis.c: Add support for disassembling Thumb opcodes.
1605 (print_insn_thumb): New function.
1607 * disassemble.c (disasm_symaddr): New function.
1609 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1610 (thumb_opcodes): Table of Thumb opcodes.
1612 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1614 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1616 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1617 and 'v' as operand types.
1619 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1621 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1622 <olivier.carmona@di.epfl.ch>.
1623 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1624 which has a two word opcode with a one word argument.
1626 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1628 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1629 unsigned, not signed.
1630 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1632 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1634 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1635 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1636 (ftrv): Slay the cut-and-paste monster.
1638 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1640 * d10v-dis.c (print_operand):
1641 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1643 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1645 * d10v-opc.c (OPERAND_FLAG): Split into:
1646 (OPERAND_FFLAG, OPERAND_CFLAG) .
1650 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1652 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1653 field for all INSN_MACRO's.
1654 * mips16-opc.c: same
1656 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1658 * mips-opc.c (sync,cache): These are 3900 insns.
1660 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1662 sh-opc.h (sh_table): Remove ftst/nan.
1664 start-sanitize-cygnus
1665 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1667 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1668 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1670 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1674 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1676 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1677 Add tx49 insns and configury.
1680 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1682 * mips-opc.c (ffc, ffs): Fix mask.
1684 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1686 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1689 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1691 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1692 start-sanitize-cygnus
1693 Added VR5400 instructions.
1694 (N5): New cpu-id macro.
1696 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1698 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1700 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1701 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1703 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1705 * v850-dis.c (disassemble): Replace // with /* ... */
1707 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1709 * sparc-opc.c: Add wr & rd for v9a asr's.
1710 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1711 (v9a_asr_reg_names): New variable.
1712 Patch from David Miller <davem@vger.rutgers.edu>.
1714 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1716 * sparc-opc.c (v9notv9a): New insn type.
1717 (IMPDEP): Move to the end to not conflict with edge8 et al.
1718 Patch from David Miller <davem@vger.rutgers.edu>.
1720 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1722 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1724 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1726 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1728 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1730 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1731 of disassemble_info structure to determine if an overlay address
1732 has a matching symbol in low memory.
1734 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1735 new symbol_at_address_func field in disassemble_info structure.
1737 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1739 * v850-opc.c (extract_d22): Use signed arithmatic.
1741 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1743 * mips-opc.c: Three op mult is not an ISA insn.
1745 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1747 * mips-opc.c: Fix formatting.
1749 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1751 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1752 than assuming that char is signed. Explicitly sign extend 16 bit
1753 values, rather than assuming that short is 16 bits.
1754 (OP_sI, OP_J, OP_DIR): Likewise.
1756 start-sanitize-v850e
1757 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1759 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1763 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1765 * v850-opc.c: Fix typo in comment.
1767 * v850-dis.c (disassemble): Add test of processor type when
1768 determining opcodes.
1770 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1772 * configure.in: Use a diversion to set enable_shared before the
1773 arguments are parsed.
1774 * configure: Rebuild.
1776 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1778 * m68k-opc.c (TBL1): Use ! rather than `.
1779 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1781 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1783 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1785 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1787 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1790 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1791 * aclocal.m4: Rebuild with new libtool.
1792 * configure: Rebuild.
1794 start-sanitize-v850e
1795 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1797 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1800 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1802 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1804 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1806 * v850-opc.c (v850_opcodes): Further rearrangements.
1808 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1810 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1812 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1814 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1817 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1819 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1821 * mips16-opc.c: Added mips16 sdbbp.
1824 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1826 * v850-opc.c: Initialise processors field of v850_opcode structure.
1828 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1830 Merge changes from Martin Hunt:
1832 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1834 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1835 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1836 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1838 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1840 * d30v-dis.c (print_insn): First operand of d*i (delayed
1841 branch) instructions is relative.
1843 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1844 (d30v_operand_table): Add IMM6S3 type.
1845 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1847 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1848 and cmp instructions.
1850 * d30v-opc.c: Correct entries for repeat*, and sat*.
1851 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1852 types. Correct several formats.
1854 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1856 * d30v-opc.c (pre_defined_registers): Change control registers.
1858 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1859 SHORT_C2. Manual was incorrect.
1861 * d30v-dis.c (lookup_opcode): Return value now indicates
1862 if an opcode has a short and a long form. Used for deciding
1863 to append a ".s" or ".l".
1864 (print_insn): Append a ".s" to an instruction if it is
1865 the short form and ".l" if it is a long form. Do not append
1866 anything if the instruction has only one possible size.
1868 * d30v-opc.c: Change mulx2h to require an even register.
1869 New form: SHORT_A2; a SHORT_A form that needs an even
1870 register as the first operand.
1872 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1873 instruction was not being disassembled if there were an odd
1874 number of instructions.
1876 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1878 start-sanitize-v850e
1879 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1881 * v850-dis.c (disassemble): Improved display of register lists.
1884 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1886 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1887 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1888 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1889 fandnot1s, fandnot2s.
1891 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1893 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1895 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1897 * cgen-asm.c (cgen_parse_address): New argument resultp.
1898 All callers updated.
1899 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1901 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1903 * mn10200-dis.c (disassemble): PC relative instructions are
1904 relative to the next instruction, not the current instruction.
1906 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1908 * v850-dis.c (disassemble): Only signed extend values that are not
1909 returned by extract functions.
1910 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1912 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1914 * v850-opc.c: Update comments. Remove use of
1915 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1917 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1919 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1921 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1923 * configure: Rebuilt with latest devo autoconf for NT support.
1925 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1927 * v850-dis.c (disassemble): Use curly brace syntax for register
1930 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1931 where r0 is being used as a destination register.
1933 start-sanitize-v850e
1934 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1936 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1939 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1941 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1942 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1943 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1944 Add insns to access SGR and DBR.
1945 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1947 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1949 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1951 start-sanitize-v850e
1952 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1954 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1955 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1958 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1960 * configure (cgen_files): Add support for v850e target.
1961 * configure.in (cgen_files): Add support for v850e target.
1963 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1965 * configure (cgen_files): Add support for v850ea target.
1966 * configure.in (cgen_files): Add support for v850ea target.
1969 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1971 * configure.in (bfd_arc_arch): Add.
1972 * configure: Rebuild.
1973 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1974 * Makefile.in: Rebuild.
1975 * arc-dis.c, arc-opc.c: New files.
1976 * disassemble.c (ARCH_all): Define ARCH_arc.
1977 (disassembler): Add ARC support.
1979 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1981 start-sanitize-v850e
1982 * v850-dis.c (disassemble): Add support for v850EA instructions.
1984 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1985 (v850_opcodes): Add v850EA instructions.
1987 * v850-dis.c (disassemble): Add support for v850E instructions.
1989 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1990 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1991 insert_spe, extract_spe): New Functions.
1992 (v850_opcodes): Add v850E instructions.
1995 * v850-opc.c: Reorganised and re-layed out to improve readability
1998 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2000 * configure: Rebuild with autoconf 2.12.1.
2002 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * aclocal.m4, configure: Rebuild with new automake patches.
2006 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2008 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2009 * acinclude.m4: Just include acinclude.m4 from BFD.
2010 * aclocal.m4, configure: Rebuild.
2012 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * Makefile.am: New file, based on old Makefile.in.
2015 * acconfig.h: New file.
2016 * acinclude.m4: New file.
2017 * stamp-h.in: New file.
2018 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2019 Removed shared library handling; now handled by libtool. Replace
2020 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2021 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2022 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2023 handling in AC_OUTPUT.
2024 * dep-in.sed: Change .o to .lo.
2025 * Makefile.in: Now built with automake.
2026 * aclocal.m4: Now built with aclocal.
2027 * config.in, configure: Rebuild.
2029 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2031 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2033 start-sanitize-r5900
2034 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2036 * mips-opc.c: Fix coding of mtsa.
2039 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2041 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2043 * sparc-dis.c (sorted_opcodes): New static local.
2044 (struct opcode_hash): `opcode' is pointer to const element.
2045 (build_hash): First arg is now table of sorted pointers.
2046 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2047 (compare_opcodes): Update.
2049 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2051 * cgen-opc.c: #include <ctype.h>.
2052 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2053 Handle case insensitive hashing.
2054 (hash_keyword_value): Change type of `value' to unsigned int.
2056 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2058 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2059 precision FP, mark it as such. Likewise for double precision
2060 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2062 start-sanitize-r5900
2063 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2066 start-sanitize-r5900
2067 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2069 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2070 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2073 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2075 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2077 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2078 nesting depth when all the macros are expanded.
2080 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2082 * sparc-opc.c: The fcmp v9a instructions take an integer register
2083 as a destination, not a floating point register. From Christian
2084 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2086 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2088 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2089 syntax. From Roman Hodek
2090 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2092 * i386-dis.c (twobyte_has_modrm): Fix pand.
2094 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2096 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2098 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2100 * arm-dis.c: Add prototypes for arm_decode_shift and
2103 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2105 * mips-opc.c: Add r3900 insns.
2107 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2109 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2110 print delay slot instructions on the same line. When using a PC
2111 relative load, add a comment with the value being loaded if it can
2114 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2116 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2117 to pushS/popS for segment regs and byte constant so that
2118 pushw/popw printed when in 16 bit data mode.
2120 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2121 print cbtw, cwtd in 16 bit data mode.
2122 * i386-dis.c (putop): extra case W to support above.
2124 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2125 address size prefix in 16 bit address mode.
2127 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2129 * sh-dis.c: Reindent. Rename local variable fprintf to
2132 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2134 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2136 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2138 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2140 * mips16-opc.c (mip16_opcodes): same.
2142 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2144 * m68k-opc.c (moveb): Change $d to %d.
2146 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2148 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2149 (twobyte_has_modrm): Likewise.
2151 (OP_MMX, OP_EM, OP_MS): New static functions.
2153 * i386-dis.c: Revert patch of April 4. The output now matches
2156 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2158 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2161 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2163 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2165 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2167 * Makefile.in (install): Depend upon installdirs.
2168 (installdirs): New target.
2170 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2172 From Thomas Graichen <graichen@rzpd.de>:
2173 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2174 * configure: Rebuild.
2176 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2178 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2179 Delete string{,s}.h support.
2181 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2183 * cgen-asm.c (cgen_parse_operand_fn): New global.
2184 (cgen_parse_{{,un}signed_integer,address}): Update call to
2185 cgen_parse_operand_fn.
2186 (cgen_init_parse_operand): New function.
2187 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2188 from cgen_asm_init_parse.
2189 (m32r_cgen_assemble_insn): New operand `errmsg'.
2190 Delete call to as_bad, return error message to caller.
2191 (m32r_cgen_asm_hash_keywords): #if 0 out.
2193 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2195 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2197 [case 'J']: Fix typo in register name.
2199 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2201 * configure.in: Substitute SHLIB_LIBS.
2202 * configure: Rebuild.
2203 * Makefile.in (SHLIB_LIBS): New variable.
2204 ($(SHLIB)): Use $(SHLIB_LIBS).
2206 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2208 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2210 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2212 * disassemble.c (disassembler): Handle m32r.
2214 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2216 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2217 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2218 * Makefile.in (CFILES): Add them.
2219 (ALL_MACHINES): Add them.
2220 (dependencies): Regenerate.
2221 * configure.in (cgen_files): New variable.
2222 (bfd_m32r_arch): Add entry.
2223 * configure: Regenerate.
2225 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2227 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2228 * configure: Rebuild.
2230 * Makefile.in: Rebuild dependencies.
2232 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2234 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2237 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2239 * Branched binutils 2.8.
2241 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2243 * m10200-dis.c: Rename from mn10200-dis.c.
2244 * m10200-opc.c: Rename from mn10200-opc.c.
2245 * m10300-dis.c: Rename from mn10300-dis.c
2246 * m10300-opc.c: Rename from mn10300-opc.c.
2247 * Makefile.in: Update accordingly.
2249 * mips16-opc.c: Add mul and dmul macros.
2251 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2253 * makefile.vms: Update CFLAGS, add clean target.
2255 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2257 * mips-opc.c: Add "wait". From Ralf Baechle
2258 <ralf@gnu.ai.mit.edu>.
2260 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2261 * configure, config.in: Rebuild.
2262 * sysdep.h: Include <stdlib.h> if it exists.
2263 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2265 * Makefile.in: Rebuild dependencies.
2267 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2269 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2270 Andrew Bray <andy@madhouse.demon.co.uk>.
2272 * mips-opc.c: Add cast when setting mips_opcodes.
2274 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2276 * v850-dis.c (disassemble): Fix sign extension problem.
2277 * v850-opc.c (extract_d*): Fix sign extension problems to make
2278 disassembly calculate branch offsets correctly.
2280 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2282 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2284 * mips-opc.c: Add dctr and dctw.
2286 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2288 * d30v-dis.c (print_insn): Change the way signed constants
2291 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2293 * Makefile.in (BFD_H): New variable.
2294 (HFILES): New variable.
2295 (CFILES): Add all C files.
2296 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2297 Delete old dependencies, and build new ones.
2298 * dep-in.sed: New file.
2300 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2302 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2304 start-sanitize-coldfire
2305 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2307 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2310 end-sanitize-coldfire
2311 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2313 * mn10200-opc.c: Change "trap" to "syscall".
2314 * mn10300-opc.c: Add new "syscall" instruction.
2316 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2318 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2319 mulul insns on the coldfire.
2321 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2324 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2325 (print_insn_little_arm): Likewise.
2327 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2329 Based on patches from H.J. Lu <hjl@lucon.org>:
2330 * i386-dis.c (fetch_data): Add prototype.
2331 * m68k-dis.c (fetch_data): Add prototype.
2332 (dummy_print_address): Add prototype. Make static.
2333 * ppc-opc.c (valid_bo): Add prototype.
2334 * sparc-dis.c (build_hash_table): Add prototype.
2335 (is_delayed_branch, compute_arch_mask): Add prototypes.
2336 (print_insn_sparc): Make several local variables const.
2337 (compare_opcodes): Change arguments to const PTR. Add prototype.
2338 * sparc-opc.c (arg): Change name field to be const.
2339 (lookup_name, lookup_value): Add prototypes. Change table and
2340 name parameters to be const.
2341 (sparc_encode_asi): Change name parameter to be const.
2342 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2343 (sparc_encode_sparclet_cpreg): Likewise.
2344 (sparc_decode_asi): Change return type to be const.
2345 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2346 (sparc_decode_sparclet_cpreg): Likewise.
2348 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2350 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2351 Solaris doesn't like the combined options, and the -f is
2353 (stamp-tshlink, install): Likewise.
2355 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2357 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2360 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2362 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2364 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2366 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2369 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2371 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2373 start-sanitize-tic80
2374 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2376 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2378 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2380 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2383 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2385 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2386 floatformat_to_double to make portable.
2387 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2390 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2392 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2393 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2395 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2397 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2398 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2400 start-sanitize-tic80
2401 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2403 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2404 (OFF_SL_BR_SCALED): ... to this, and added the flag
2405 TIC80_OPERAND_BASEREL to the flags word.
2406 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2410 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2412 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2413 Change mips_opcodes from const array to a pointer,
2414 and change bfd_mips_num_opcodes from const int to int,
2415 so that we can increase the size of the mips opcodes table
2418 start-sanitize-tic80
2419 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2421 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2422 store BITNUM values in the table in one's complement form
2423 to match behavior when assembler is given a raw numeric
2424 value for a BITNUM operand.
2425 * tic80-dis.c (print_operand_bitnum): Ditto.
2428 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2430 * d30v-opc.c: Removed references to FLAG_X.
2432 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2434 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2436 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2438 * Makefile.in: Added d30v object files.
2439 * configure: (bfd_d30v_arch) Rebuilt.
2440 * configure.in: (bfd_d30v_arch) Added new case.
2441 * d30v-dis.c: New file.
2442 * d30v-opc.c: New file.
2443 * disassemble.c (disassembler) Add entry for d30v.
2445 start-sanitize-tic80
2446 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2448 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2449 representations for the floating point BITNUM values.
2451 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2453 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2454 in the table in one's complement form, as they appear in the
2456 (tic80_symbol_to_value): Use macros to access predefined
2458 (tic80_value_to_symbol): Ditto.
2459 (tic80_next_predefined_symbol): New function.
2460 * tic80-dis.c (print_operand_bitnum): Remove code that did
2461 one's complement for BITNUM values.
2464 start-sanitize-r5900
2465 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2467 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2470 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2472 * makefile.vms: Remove 8 bit characters. Update to latest
2475 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2477 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2479 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2481 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2482 (IMM24_PCREL): Likewise.
2484 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2486 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2487 address for an extended PC relative instruction that is not a
2490 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2492 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2495 start-sanitize-tic80
2496 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2498 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2499 (tic80_opcodes): Sort entries so that long immediate forms
2500 come after short immediate forms, making it easier for
2501 assembler to select the right one for a given operand.
2504 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2506 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2508 (print_insn_mips16): Likewise.
2510 start-sanitize-r5900
2511 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2513 * mips-opc.c: add r5900.
2516 start-sanitize-tic80
2517 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2520 a symbol class that restricts translation to just that
2521 class (general register, condition code, etc).
2523 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2525 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2526 and REG_DEST_E for register operands that have to be
2527 an even numbered register. Add REG_FPA for operands that
2528 are one of the floating point accumulator registers.
2529 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2530 (tic80_opcodes): Change entries that need even numbered
2531 register operands to use the new operand table entries.
2532 Add "or" entries that are identical to "or.tt" entries.
2535 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2537 * mips16-opc.c: Add new cases of exit instruction for
2539 * mips-dis.c (print_mips16_insn_arg): Display floating point
2540 registers in operands of exit instruction. Print `$' before
2541 register names in operands of entry and exit instructions.
2543 start-sanitize-tic80
2544 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2546 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2547 pairs for all predefined symbols recognized by the assembler.
2548 Also used by the disassembling routines.
2549 (tic80_symbol_to_value): New function.
2550 (tic80_value_to_symbol): New function.
2551 * tic80-dis.c (print_operand_control_register,
2552 print_operand_condition_code, print_operand_bitnum):
2553 Remove private tables and use tic80_value_to_symbol function.
2556 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2558 * d10v-dis.c (print_operand): Change address printing
2559 to correctly handle PC wrapping. Fixes PR11490.
2561 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2563 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2566 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2568 * mips-dis.c (print_insn_mips16): Set insn_info information.
2569 (print_mips16_insn_arg): Likewise.
2571 * mips-dis.c (print_insn_mips16): Better handling of an extend
2572 opcode followed by an instruction which can not be extended.
2574 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2576 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2577 coldfire moveb instruction to not allow an address register as
2578 destination. Although the documentation does not indicate that
2579 this is invalid, experiments uncovered unexpected behavior.
2580 Added a comment explaining the situation. Thanks to Andreas
2581 Schwab for pointing this out to me.
2583 start-sanitize-tic80
2584 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2586 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2587 entries are presorted so that entries with the same mnemonic are
2588 adjacent to each other in the table. Sort the entries for each
2589 instruction so that this is true.
2592 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2594 * m68k-dis.c: Include <libiberty.h>.
2595 (print_insn_m68k): Sort the opcode table on the most significant
2596 nibble of the opcode.
2598 start-sanitize-tic80
2599 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2601 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2602 "vsub", "vst", "xnor", and "xor" instructions.
2603 (V_a1): Renamed from V_a, msb of accumulator reg number.
2604 (V_a0): Add macro, lsb of accumulator reg number.
2606 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2608 * tic80-dis.c (print_insn_tic80): Broke excessively long
2609 function up into several smaller ones and arranged for
2610 the instruction printing function to be callable recursively
2611 to print vector instructions that have both a load and a
2612 math instruction packed into a single opcode.
2613 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2614 to explain why it comes after the other vector opcodes.
2617 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2619 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2620 move insns to handle immediate operands.
2622 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2624 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2625 fix operand mask in the "moveml" entries for the coldfire.
2627 start-sanitize-tic80
2628 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2630 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2631 New macros for building vector instruction opcodes.
2632 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2633 FMT_LI, which were unused. The field is now a flags field.
2634 Remove some opcodes that are possible, but illegal, such
2635 as long immediate instructions with doubles for immediate
2636 values. Add "vadd" and "vld" instructions.
2638 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2640 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2641 the order more logical. Move the shift alias instructions ("rotl",
2642 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2643 interspersed with the regular sr.x and sl.x instructions. Add
2644 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2645 "sub", "subu", "swcr", and "trap".
2647 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2649 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2650 (OFF_SL_PC): Renamed from OFF_SL.
2651 (OFF_SS_BR): New operand type for base relative operand.
2652 (OFF_SL_BR): New operand type for base relative operand.
2653 (REG_BASE): New operand type for base register operand.
2654 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2655 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2656 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2658 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2659 10 char field, padded with spaces on rhs, rather than a string
2660 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2661 than old TIC80_OPERAND_RELATIVE. Add support for new
2662 TIC80_OPERAND_BASEREL flag bit.
2664 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2666 * tic80-dis.c (print_insn_tic80): Print floating point operands
2668 * tic80-opc.c (SPFI): Add single precision floating point
2669 immediate operand type.
2670 (ROTATE): Add rotate operand type for shifts.
2671 (ENDMASK): Add for shifts.
2672 (n): Macro for the 'n' bit.
2673 (i): Macro for the 'i' bit.
2674 (PD): Macro for the 'PD' field.
2675 (P2): Macro for the 'P2' field.
2676 (P1): Macro for the 'P1' field.
2677 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2681 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2683 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2684 adding in current address for pc-relative operands.
2686 start-sanitize-tic80
2687 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2689 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2690 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2691 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2692 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2693 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2694 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2695 (REG_SCALED, LSI_SCALED): New operand types.
2696 (E): New macro for 'E' bit at bit 27.
2697 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2698 opcodes, including the various size flavors (b,h,w,d) for
2699 the direct load and store instructions.
2701 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2703 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2705 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2706 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2707 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2708 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2709 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2710 masks with "MASK_* & ~M_*" to get the M bit reset.
2711 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2713 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2715 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2716 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2717 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2719 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2720 CC, SICR, and LICR table entries.
2721 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2722 "bcnd", and "brcr" opcodes.
2725 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2727 * ppc-opc.c (powerpc_operands): Make comment match the
2728 actual fields (no shift field).
2729 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2730 start-sanitize-tic80
2731 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2732 partial implementation, work in progress.
2733 * tic80-opc.c (tic80_operands): Begin construction operands table.
2734 (tic80_opcodes): Continue populating opcodes table and start
2735 filling in the operand indices.
2736 (tic80_num_opcodes): Add this.
2739 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2741 * m68k-opc.c: Add #B case for moveq.
2743 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2745 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2746 before they are used.
2748 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2750 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2751 for "breakpoint" instruction.
2753 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2755 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2756 (dep): Use ALL_CFLAGS rather than CFLAGS.
2758 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2760 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2763 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2765 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2766 start-sanitize-tic80
2767 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2770 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2772 * mips16-opc.c: Add "abs".
2774 start-sanitize-tic80
2775 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2777 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2778 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2779 (disassembler): Add bfd_arch_tic80 support to set disassemble
2780 to print_insn_tic80.
2781 * tic80-dis.c (print_insn_tic80): Add stub.
2783 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2785 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2786 * configure: Regenerate with autoconf.
2787 * tic80-dis.c: Add file.
2788 * tic80-opc.c: Add file.
2791 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2793 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2795 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2797 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2798 (mn10200_opcodes): Use it for some logicals and btst insns.
2799 Add "break" and "trap" instructions.
2801 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2803 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2805 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2807 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2808 relative load or add now depends upon whether the instruction is
2811 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2813 * mn10200-dis.c: Finish writing disassembler.
2814 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2815 Fix mask for "jmp (an)".
2817 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2818 handle endianness issues for mn10300.
2820 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2822 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2824 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2825 instruction. Fix opcode field for "movb (imm24),dn".
2827 * mn10200-opc.c (mn10200_operands): Fix insertion position
2830 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2832 * mn10200-opc.c: Create mn10200 opcode table.
2833 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2834 but moving along nicely.
2836 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2838 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2840 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2842 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2843 specifiers for fmovem* instructions.
2845 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2847 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2849 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2851 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2854 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2856 * mn10300-opc.c: Add some comments explaining the various
2859 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2861 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2863 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2866 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2867 operand specifiers in fmovm* instructions.
2869 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2871 * ppc-opc.c (insert_li): Give an error if the offset has the two
2872 least significant bits set.
2874 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2876 * mips-dis.c (print_insn_mips16): Separate the instruction from
2877 the arguments with a tab, not a space.
2879 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2881 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2884 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2887 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2889 * configure: Rebuild with autoconf 2.12.
2891 Add support for mips16 (16 bit MIPS implementation):
2892 * mips16-opc.c: New file.
2893 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2894 (mips16_reg_names): New static array.
2895 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2896 after seeing a 16 bit symbol.
2897 (print_insn_little_mips): Likewise.
2898 (print_insn_mips16): New static function.
2899 (print_mips16_insn_arg): New static function.
2900 * mips-opc.c: Add jalx instruction.
2901 * Makefile.in (mips16-opc.o): New target.
2902 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2903 * configure: Rebuild.
2905 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2907 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2908 operand specifiers in *save, *restore and movem* instructions.
2910 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2913 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2914 register operands for immediate arithmetic, not, neg, negx, and
2915 set according to condition instructions.
2917 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2918 specifier of the effective-address operand in immediate forms of
2919 arithmetic instructions. The specifier for the immediate operand
2920 notes how and where the constant will be stored.
2922 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2924 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2927 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2930 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2932 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2934 * mn10300-dis.c (disassemble): Handle register lists.
2936 * mn10300-opc.c: Fix handling of register list operand for
2937 "call", "ret", and "rets" instructions.
2939 * mn10300-dis.c (disassemble): Print PC-relative and memory
2940 addresses symbolically if possible.
2941 * mn10300-opc.c: Distinguish between absolute memory addresses,
2942 pc-relative offsets & random immediates.
2944 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2946 (disassemble): Handle SPLIT and EXTENDED operands.
2948 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2950 * mn10300-dis.c: Rough cut at printing some operands.
2952 * mn10300-dis.c: Start working on disassembler support.
2953 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2955 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2957 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2959 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2961 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2963 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2965 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2966 register argument is calls and jmp instructions.
2968 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2970 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2971 getx operand. Fix opcode for mulqu imm,dn.
2973 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2975 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2976 in MN10300_OPERAND_SPLIT operands for how many bits
2977 appear in the basic insn word. Add IMM32_HIGH24,
2978 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2979 (mn10300_opcodes): Use new operands as needed.
2981 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2982 for bset, bclr, btst instructions.
2983 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2985 * mn10300-opc.c (mn10300_operands): Remove many redundant
2986 operands. Update opcode table as appropriate.
2987 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2988 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2990 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2992 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2993 operands (for indexed load/stores). Fix bitpos for DI
2994 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2995 few instructions that insert immediates/displacements in the
2996 middle of the instruction. Add IMM8E for 8 bit immediate in
2997 the extended part of an instruction.
2998 (mn10300_operands): Use new opcodes as appropriate.
3000 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3002 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3003 sequential so the assembler never parallelizes it with
3006 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3008 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3009 a data/address register that appears in register field 0
3010 and register field 1.
3011 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3013 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3015 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3016 standard disassembly.
3018 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3019 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3020 Recategorize PALcode instructions.
3022 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3024 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3026 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3028 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3029 there are no operand types.
3031 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3033 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3035 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3037 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3039 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3041 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3043 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3044 and sst.w instructions.
3046 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3049 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3051 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3054 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3056 * ppc-opc.c (PPCPWR2): Define.
3057 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3060 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3062 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3063 field for movhu instruction.
3065 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3066 cast value to "long" not "signed long" to keep hpux10
3069 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3071 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3074 * mn10300-opc.c (FMT*): Remove definitions.
3076 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3077 for shift-by-register opcodes.
3079 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3080 into [AD][MN][01] for encoding the position of the register
3083 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3085 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3086 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3088 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3090 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3091 Fix various typos. Add "PAREN" operand.
3092 (MEM, MEM2): Define.
3093 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3094 operands. Fix several typos.
3096 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3099 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3101 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3102 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3104 (mn10300_opcodes): Break opcode format out into its own field.
3105 Update many operand fields to deal with signed vs unsigned
3106 issues. Fix one or two typos in the "mov" instruction
3107 opcode, mask and/or operand fields.
3109 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3111 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3112 m68851 wasn't reset.
3114 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3116 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3117 all opcodes. Very rough cut at operands for all opcodes.
3119 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3122 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3124 * mn10200-opc.c, mn10300-opc.c: New files.
3125 * mn10200-dis.c, mn10300-dis.c: New files.
3126 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3127 * disassemble.c: Break mn10x00 support into 10200 and 10300
3129 * configure.in: Likewise.
3130 * configure: Rebuilt.
3132 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3134 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3136 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3138 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3140 * disassemble (ARCH_mn10x00): Define.
3141 (disassembler): Handle bfd_arch_mn10x00.
3142 * configure.in: Recognize bfd_mn10x00_arch.
3143 * configure: Rebuilt.
3145 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3147 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3148 accordingly. Don't declare functions using op_rtn.
3150 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3152 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3153 params to be more standard.
3154 * (disassemble): Print absolute addresses and symbolic names for
3155 branch and jump targets.
3156 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3158 * (v850_opcodes): Add breakpoint insn.
3160 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3162 * m68k-opc.c: Move the fmovemx data register cases before the
3163 other cases, so that they get recognized before the data register
3164 does gets treated as a degenerate register list.
3166 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3168 * mips-opc.c: Add a case for "div" and "divu" with two registers
3169 and a destination of $0.
3171 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3173 * mips-dis.c (print_insn_arg): Add prototype.
3174 (_print_insn_mips): Ditto.
3176 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3178 * mips-dis.c (print_insn_arg): Print condition code registers as
3181 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3183 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3185 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3187 * v850-dis.c (disassemble): Make static. Provide prototype.
3189 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3191 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3194 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3196 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3197 ']' characters into the output stream.
3198 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3199 Add "memop" field to all opcodes (for the disassembler).
3200 Reorder opcodes so that "nop" comes before "mov" and "jr"
3201 comes before "jarl".
3203 * v850-dis.c (print_insn_v850): Fix typo in last change.
3205 * v850-dis.c (print_insn_v850): Properly handle disassembling
3206 a two byte insn at the end of a memory region when the memory
3207 region's size is only two byte aligned.
3209 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3211 * v850-dis.c (v850_reg_names): Define.
3212 (v850_sreg_names, v850_cc_names): Likewise.
3213 (disassemble): Very rough cut at printing operands (unformatted).
3215 * v850-opc.c (BOP_MASK): Fix.
3216 (v850_opcodes): Fix mask for jarl and jr.
3218 * v850-dis.c: New file. Skeleton for disassembler support.
3219 * Makefile.in Remove v850 references, they're not needed here.
3220 * configure.in: Add v850-dis.o when building v850 toolchains.
3221 * configure: Rebuilt.
3222 * disassemble.c (disassembler): Call v850 disassembler.
3224 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3225 (insert_d8_6, extract_d8_6): New functions.
3226 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3227 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3229 (IF4A, IF4B): Use "D7" instead of "D7S".
3230 (IF4C, IF4D): Use "D8_7" instead of "D8".
3231 (IF4E, IF4F): New. Use "D8_6".
3232 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3233 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3235 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3236 (v850_operands): Change D16 to D16_15, use special insert/extract
3237 routines. New new D16 that uses the generic insert/extract code.
3238 (IF7A, IF7B): Use D16_15.
3239 (IF7C, IF7D): New. Use D16.
3240 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3242 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3243 message. Issue an error if the branch offset is odd.
3245 * v850-opc.c: Add notes about needing special insert/extract
3246 for all the load/store insns, except "ld.b" and "st.b".
3248 * v850-opc.c (insert_d22, extract_d22): New functions.
3249 (v850_operands): Use insert_d22 and extract_d22 for
3251 (insert_d9): Fix range check.
3253 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3255 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3256 and set bits field to D9 and D22 operands.
3258 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3260 * v850-opc.c (v850_operands): Define SR2 operand.
3261 (v850_opcodes): "ldsr" uses R1,SR2.
3263 * v850-opc.c (v850_opcodes): Fix opcode specs for
3264 sld.w, sst.b, sst.h, sst.w, and nop.
3266 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3268 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3269 end of the opcode table.
3271 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-opc.c (pre_defined_registers): Added register pairs,
3274 "r0-r1", "r2-r3", etc.
3276 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3278 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3279 Create I16U for an unsigned 16bit mmediate operand.
3280 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3282 * v850-opc.c (v850_operands): Define EP operand.
3283 (IF4A, IF4B, IF4C, IF4D): Use EP.
3285 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3286 with immediate operand, "movhi". Tweak "ldsr".
3288 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3289 correct. Get sld.[bhw] and sst.[bhw] closer.
3291 * v850-opc.c (v850_operands): "not" is a two byte insn
3293 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3295 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3297 * v850-opc.c (two): Get order of words correct.
3299 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3301 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3302 register source and destination operands.
3303 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3305 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3306 same thinko in "trap" opcode.
3308 * v850-opc.c (v850_opcodes): Add initializer for size field
3311 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3312 Add D8 for 8-bit unsigned field in short load/store insns.
3313 (IF4A, IF4D): These both need two registers.
3314 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3315 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3316 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3317 for "ldsr" and "stsr".
3318 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3321 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3322 short store word (sst.w).
3324 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3326 * v850-opc.c (v850_operands): Added insert and extract fields,
3327 pointers to functions that handle unusual operand encodings.
3329 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3331 * v850-opc.c (v850_opcodes): Enable "trap".
3333 * v850-opc.c (v850_opcodes): Fix order of displacement
3334 and register for "set1", "clr1", "not1", and "tst1".
3336 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3338 * v850-opc.c (v850_operands): Add "B3" support.
3339 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3342 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3344 * v850-opc.c: Close unterminated comment.
3346 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3348 * v850-opc.c (v850_operands): Add flags field.
3349 (v850_opcodes): add move opcodes.
3351 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3353 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3354 * configure: (bfd_v850v_arch) Add new case.
3355 * configure.in: (bfd_v850_arch) Add new case.
3356 * v850-opc.c: New file.
3358 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3360 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3362 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3364 * d10v-opc.c: Add additional information to the opcode
3365 table to help determinine which instructions can be done
3368 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3370 * mpw-make.sed: Update editing of include pathnames to be
3373 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3375 * arm-opc.h: Added "bx" instruction definition.
3377 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3379 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3381 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3383 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3385 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3387 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3389 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3391 * makefile.vms: Update for alpha-opc changes.
3393 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3395 * i386-dis.c (print_insn_i386): Actually return the correct value.
3396 (ONE, OP_ONE): #ifdef out; not used.
3398 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3400 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3401 Changed subi operand type to treat 0 as 16.
3403 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3405 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3408 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3410 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3411 memory transfer instructions. Add new format string entries %h and %s.
3412 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3415 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3417 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3418 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3420 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3422 * alpha-dis.c (print_insn_alpha_osf): Remove.
3423 (print_insn_alpha_vms): Remove.
3424 (print_insn_alpha): Make globally visible. Chose the register
3425 names based on info->flavour.
3426 * disassemble.c: Always return print_insn_alpha for the alpha.
3428 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3430 * d10v-dis.c (dis_long): Handle unknown opcodes.
3432 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3434 * d10v-opc.c: Changes to support signed and unsigned numbers.
3435 All instructions with the same name that have long and short forms
3436 now end in ".l" or ".s". Divs added.
3437 * d10v-dis.c: Changes to support signed and unsigned numbers.
3439 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3441 * d10v-dis.c: Change all functions to use info->print_address_func.
3443 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3445 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3446 move ccr/sr insns more strict so that the disassembler only
3447 selects them when the addressing mode is data register.
3449 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3450 * d10v-opc.c (pre_defined_registers): Declare.
3451 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3452 to pick a better name for the registers.
3454 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3456 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3457 operands for fexpand and fpmerge. From Christian Kuehnke
3458 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3460 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3462 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3463 print routine. Take new regnames and cpumask arguments.
3464 Kill the environment variable nonsense.
3465 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3466 (print_insn_alpha_vms): New function. Do VMS style regnames.
3467 * disassemble.c (disassembler): Test bfd flavour to pick
3468 between OSF and VMS routines. Default to OSF.
3470 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3472 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3473 * configure: Rebuild.
3474 * Makefile.in (install): Use @INSTALL_SHLIB@.
3476 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3478 * configure: (bfd_d10v_arch) Add new case.
3479 * configure.in: (bfd_d10v_arch) Add new case.
3480 * d10v-dis.c: New file.
3481 * d10v-opc.c: New file.
3482 * disassemble.c (disassembler) Add entry for d10v.
3484 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3486 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3487 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3489 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3491 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3492 distinguish between variants of the instruction set.
3493 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3494 distinguish between variants of the instruction set.
3496 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3498 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3499 the 8086 instruction set.
3500 * i386-dis.c: General cleanups. Make most things static. Add
3501 prototypes. Get rid of static variables aflags and dflags. Pass
3502 them as args (to almost everything).
3504 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3506 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3508 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3510 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3511 if the next arg is marked with SRC_IN_DST. Gross.
3513 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3514 we're looking for and find EXR.
3516 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3517 if we're looking for KBIT and we don't find it.
3519 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3522 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3523 3bit immediate operands.
3525 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3527 * Released binutils 2.7.
3529 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3530 <kkaempf@progis.ac-net.de>.
3532 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3534 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3536 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3538 * sparc-dis.c (print_insn_sparclite): New routine to print
3539 sparclite instructions.
3541 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3543 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3545 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3547 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3548 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3549 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3551 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3553 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3554 Use autoconf-set values.
3555 (docdir, oldincludedir): Removed.
3556 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3558 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3560 * alpha-opc.c: New file.
3561 * alpha-opc.h: Remove.
3562 * alpha-dis.c: Complete rewrite to use new opcode table.
3563 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3564 * configure: Rebuild with autoconf 2.10.
3565 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3566 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3568 (alpha-opc.o): New target.
3570 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3572 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3573 Set imm_added_to_rs1 even if the source and destination register
3576 * sparc-opc.c: Add some two operand forms of the wr instruction.
3578 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3580 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3583 * disassemble.c (disassembler): Handle H8/S.
3584 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3586 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3588 * sparc-opc.c: Add beq/teq as aliases for be/te.
3590 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3591 <sergei@msil.sps.mot.com>.
3593 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3595 * makefile.vms: New file.
3597 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3599 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3601 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3604 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3606 * i386-dis.c (OP_OFF): Call append_prefix.
3608 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3610 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3611 unsigned long to silence a warning from the Solaris PowerPC
3614 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3616 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3618 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3620 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3622 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3623 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3624 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3625 cpush, cpusha, cpull sparclet insns.
3627 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3629 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3631 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3633 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3634 Set F_FLOAT on other floating point instructions.
3636 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3638 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3640 (powerpc_opcodes): Add 860/821 specific SPRs.
3642 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3644 * configure.in: Permit --enable-shared to specify a list of
3645 directories. Set and substitute BFD_PICLIST.
3646 * configure: Rebuild.
3647 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3648 uses. Set to @BFD_PICLIST@.
3650 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3652 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3653 not "abs", which may be needed for the absolute in something
3654 like btst #0,@10:8. Print L_3 immediates separately from other
3655 immediates. Change ABSMOV reference to ABS8MEM.
3657 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3659 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3660 (current_arch_mask): New static global.
3661 (compute_arch_mask): New static function.
3662 (print_insn_sparc): Delete sparc_v9_p. New static local
3663 current_mach. Resort opcode table if current_mach changes.
3664 Generalize "insn not supported" test.
3665 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3666 Delete test for v9/!v9.
3667 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3669 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3670 (brfcx): Renamed to FBRX.
3671 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3672 coprocessor mnemonics are not supported on the sparclet).
3673 (condf): Renamed to CONDF.
3674 (SLCBCC2): Delete F_ALIAS flag.
3676 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3678 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3679 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3681 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3683 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3684 that the shared library version number is set correctly.
3686 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3688 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3689 Miles Bader <miles@gnu.ai.mit.edu>.
3690 * configure: Rebuild.
3692 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3694 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3697 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3699 * configure: Rebuild with autoconf 2.8.
3701 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3703 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3704 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3706 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3709 since they appear as targets in Makefile.in.
3710 * configure: Rebuild.
3712 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3714 * mpw-make.sed: Edit out shared library support bits.
3716 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3718 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3719 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3720 (sparc_opcodes): Add sparclet insns.
3721 (sparclet_cpreg_table): New static local.
3722 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3723 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3725 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3727 * i386-dis.c (index16): New static variable.
3728 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3730 (OP_indirE): Return result of OP_E.
3731 (OP_E): Check for 16 bit addressing mode, and disassemble
3732 correctly. Optimised 32 bit case a little. Don't print
3733 "(base,index,scale)" when sib specifies only an offset.
3735 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3737 * configure.in: Set and substitute SHLIB_DEP.
3738 * configure: Rebuild.
3739 * Makefile.in (SHLIB_DEP): New variable.
3740 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3741 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3742 COMMON_SHLIB, add them to piclist with appropriate modifications.
3743 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3744 here: just use piclist.
3746 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3748 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3749 (print_insn_sparc): Rewrite v9/not-v9 tests.
3750 (compare_opcodes): Likewise.
3751 * sparc-opc.c (MASK_<ARCH>): Define.
3752 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3753 (sparclet,v6notv9): Define.
3754 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3755 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3757 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3759 * configure.in: Call AC_PROG_CC before configure.host.
3760 * configure: Rebuild.
3762 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3764 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3766 * i386-dis.c (onebyte_has_modrm): New static array.
3767 (twobyte_has_modrm): New static array.
3768 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3770 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3772 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3775 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3777 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3780 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3782 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3783 m68010up, not just m68020up | cpu32.
3785 * Makefile.in (SONAME): New variable.
3786 ($(SHLINK)): Make a link to the transformed name, as well.
3787 (stamp-tshlink): New target.
3788 (install): Skip stamp-tshlink during install.
3790 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3792 * configure.in: Call AC_ARG_PROGRAM.
3793 * configure: Rebuild.
3794 * Makefile.in (program_transform_name): New variable.
3795 (install): Transform library name before installing it.
3797 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3799 * i960-dis.c (mem): Add HX dcinva instruction.
3801 Support for building as a shared library, based on patches from
3802 Alan Modra <alan@spri.levels.unisa.edu.au>:
3803 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3804 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3805 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3806 * configure: Rebuild.
3807 * Makefile.in (ALLLIBS): New variable.
3808 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3809 (COMMON_SHLIB, SHLINK): New variables.
3810 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3811 (STAGESTUFF): Remove variable.
3812 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3813 (stamp-piclist, piclist): New targets.
3814 ($(SHLIB), $(SHLINK)): New targets.
3815 ($(OFILES)): Depend upon stamp-picdir.
3816 (disassemble.o): Build twice if PICFLAG is set.
3817 (MOSTLYCLEAN): Add pic/*.o.
3818 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3819 (distclean): Remove pic and stamp-picdir.
3820 (install): Install shared libraries.
3821 (stamp-picdir): New target.
3823 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3825 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3826 Print unknown instruction as "unknown", rather than in hex.
3828 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3830 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3832 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3834 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3836 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3838 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3839 when necessary. From Ulrich Drepper
3840 <drepper@myware.rz.uni-karlsruhe.de>.
3842 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3844 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3845 sparc_num_opcodes. Update architecture enum values.
3846 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3847 (sparc_opcode_lookup_arch): New function.
3848 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3849 (sparc_opcodes): Add v9a shutdown insn.
3851 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3853 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3854 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3856 (print_insn_sparc64): Deleted.
3857 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3860 * sparc-opc.c (architecture_pname): Add v9a.
3862 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3864 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3865 incorrectly defined as 0x16 when it should be 0x15.
3866 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3867 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3868 excb (exception barrier) which is defined in the Alpha
3869 Architecture Handbook version 2.
3870 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3871 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3872 disassembled as or, for example.
3874 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3876 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3877 (_print_insn_mips): Change i from int to unsigned int.
3879 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3881 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3882 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3884 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3886 * i386-dis.c: Added Pentium Pro instructions.
3888 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3890 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3893 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3895 * sh-opc.h (sh_nibble_type): Added REG_B.
3896 (sh_arg_type): Added A_REG_B.
3897 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3899 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3901 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3903 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3905 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3907 * Makefile.in (distclean): Remove stamp-h. From Ronald
3908 F. Guilmette <rfg@monkeys.com>.
3910 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3912 From David Mosberger-Tang <davidm@azstarnet.com>:
3913 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3916 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3918 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3919 (sh_table): Added many SH3 opcodes.
3920 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3922 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3924 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3925 (subco,subco.): Mark this PPC, not PPCCOM.
3927 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3929 * configure: Rebuild with autoconf 2.7.
3931 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3933 * configure: Rebuild with autoconf 2.6.
3935 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3937 * configure.in: Sort list of architectures. Accept but do nothing
3938 for alliant, convex, pyramid, romp, and tahoe.
3940 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3942 * a29k-dis.c (print_special): Change num to unsigned int.
3944 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3946 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3949 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3951 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3952 * configure: Rebuilt.
3954 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3956 * configure.in: Add case for bfd_i860_arch.
3957 * configure: Rebuild.
3959 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3961 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3962 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3963 (NEXTDOUBLE): Likewise.
3964 (print_insn_m68k): Don't match fmoveml if there is more than one
3965 register in the list.
3966 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3968 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3970 * m68k-opc.c: Use #W rather than #w.
3971 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3973 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3975 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3976 and likewise for all the dbxx opcodes.
3978 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3980 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3982 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3984 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3985 the VR4100 specific instructions to the mips_opcodes structure.
3987 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3989 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3990 ugly Metrowerks bug in CW6, is fixed in CW7.
3992 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3994 * ppc-opc.c (whole file): Add flags for common/any support.
3996 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3998 * Makefile.in (BISON): Remove macro.
3999 (FLAGS_TO_PASS): Remove BISON.
4001 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4003 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4005 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4006 instructions that take no args by looking at the match mask.
4007 (print_insn_arg): Always print "%" before register names.
4008 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4009 [case '_']: Don't print "@#" before address.
4010 [case 'J']: Use "%s" as format string, not register name.
4011 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4013 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4015 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4018 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4020 From David Mosberger-Tang <davidm@azstarnet.com>
4022 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4023 (alpha_insn_set): added definitions for VAX floating point
4024 instructions (Unix compilers don't generate these, but handcoded
4025 assembly might still use them).
4027 * alpha-dis.c (print_insn_alpha): added support for disassembling
4028 the miscellaneous instructions in the Alpha instruction set.
4030 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4032 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4033 no longer create sysdep.h, sed ppc-opc.c to work around a
4034 serious Metrowerks C bug.
4035 * mpw-make.in: Remove.
4036 * mpw-make.sed: New file, used by mpw-configure to edit
4037 Makefile.in into an MPW makefile.
4039 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4041 * Makefile.in (maintainer-clean): New synonym for realclean.
4043 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4045 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4046 which use '0', '1', and '2' instead. Specify the proper size for
4047 a pmove immediate operand. Correct the pmovefd patterns to be
4048 moves to a register, not from a register.
4049 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4051 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4053 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4054 %psr, %wim, %tbr as F_NOTV9.
4056 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4058 * Makefile.in (Makefile): Just rebuild Makefile when running
4060 (config.h, stamp-h): New targets.
4061 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4062 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4063 rebuilding config.h.
4064 * configure: Rebuild.
4066 * mips-opc.c: Change unaligned loads and stores with "t,A"
4067 operands to use "t,A(b)".
4069 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4071 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4073 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4075 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4076 until 3 instead of until 2.
4078 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * Makefile.in (ALL_CFLAGS): Define.
4081 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4082 (MOSTLYCLEAN): Add config.log.
4083 (distclean): Don't remove config.log.
4084 * configure.in: Substitute HDEFINES.
4085 * configure: Rebuild.
4087 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4089 * sh-opc.h (sh_arg_type): Add F_FR0.
4090 (sh_table, case fmac): Add F_FR0 as first argument.
4092 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4094 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4096 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4098 * sparc-dis.c: Remove all references to NO_V9.
4100 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * aclocal.m4: Just include ../bfd/aclocal.m4.
4103 * configure: Rebuild.
4105 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4107 * sparc-dis.c (X_DISP19): Define.
4108 (print_insn, case 'G'): Use it.
4109 (print_insn, case 'L'): Sign extend displacement.
4111 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4113 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4114 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4115 host_makefile_frag or frags.
4116 * aclocal.m4: New file.
4117 * configure: Rebuild.
4118 * Makefile.in (INSTALL): Set to @INSTALL@.
4119 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4120 (INSTALL_DATA): Set to @INSTALL_DATA@.
4122 (AR_FLAGS): Set to rc rather than qc.
4123 (CC): Define as @CC@.
4124 (CFLAGS): Set to @CFLAGS@.
4125 (@host_makefile_frag@): Remove.
4126 (config.status): Remove dependency upon @frags@.
4128 * configure.in: ../bfd/config.bfd now just sets shell variables.
4129 Use them rather than looking through target Makefile fragments.
4130 * configure: Rebuild.
4132 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4134 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4136 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4138 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4139 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4142 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4143 (lookup_{name,value}): New functions.
4144 (prefetch_table): New static local.
4145 (sparc_{encode,decode}_prefetch): New functions.
4146 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4148 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4150 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4153 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4155 * sh-dis.c: Correct comment on first line of file.
4157 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4159 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4161 * sparc-opc.c (asi, membar): New static locals.
4162 (sparc_{encode,decode}_{asi,membar}): New functions.
4163 (sparc_opcodes, membar insn): Fix.
4164 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4165 Support decoding of membar masks.
4168 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4170 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4172 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4174 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4175 and likewise for the other branches. Add bhs as an alias for bcc,
4176 and likewise for the size variants. Add dbhs as an alias for
4179 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4181 * sh-opc.h (FP sts instructions): Update to match reality.
4183 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4185 * m68k-dis.c: (fpcr_names): Add % before all register names.
4186 (reg_names): Likewise.
4187 (print_insn_arg): Don't explicitly print % before register names.
4188 Add % before register names in static array names. In case 'r',
4189 print data registers as `@(Dn)', not `Dn@'. When printing a
4190 memory address, don't print @# before it.
4191 (print_indexed): Change base_disp and outer_disp from int to
4192 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4193 syntax. Sign extend 8 byte displacement correctly.
4194 (print_base): Print using MIT syntax. Print zpc when appropriate.
4195 Change parameter disp from int to bfd_vma.
4197 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4200 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4202 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4203 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4204 * sh-opc.h (sh_arg_type): Add new operand types.
4205 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4207 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4209 * Makefile.in (distclean): Remove generated file config.h.
4211 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4213 * Makefile.in (distclean): Remove generated file config.h.
4215 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4217 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4219 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4221 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4222 rather than numopcodes. Use m68k_opcodes rather than removed
4223 opcode function. Don't check F_ALIAS.
4224 (print_insn_arg): Change first parameter to be const char *.
4225 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4226 (m68k-opc.o): New target.
4227 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4228 * configure: Rebuild.
4230 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4232 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4233 (opcode_bits, opcode_hash_table): New variables.
4234 (opcodes_initialized): Renamed from opcodes_sorted.
4235 (build_hash_table): New function.
4236 (is_delayed_branch): Use hash table.
4237 (print_insn): Renamed from print_insn_sparc, made static.
4238 Build and use hash table. If !sparc64, ignore sparc64 insns,
4239 and vice-versa if sparc64.
4240 (print_insn_sparc, print_insn_sparc64): New functions.
4241 (compare_opcodes): Move sparc64 opcodes to end.
4242 Print commutative insns with constant second.
4243 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4245 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4247 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4248 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4249 avoids printing a delay slot in a delay slot.
4250 * sh-opc.h (sh_table): Fully bracket last entry.
4252 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4254 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4256 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4258 * configure.in: Get host_makefile_frag from ${srcdir}.
4260 * configure.in: Autoconfiscated. Check for string[s].h. Create
4261 config.h from config.in. Don't set up sysdep.h link.
4262 * sysdep.h: New file.
4263 * configure, config.in: New files, generated from configure.in.
4264 * Makefile.in: Updated to be processed autoconf-style.
4265 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4266 (Makefile): Depend on config.status.
4267 (config.status): New rule.
4268 * configure.bat: Update Makefile substitutions.
4270 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4272 * mips-opc.c (L1): Define.
4273 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4274 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4277 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4279 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4280 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4281 have multiple add units but only a single logical unit.
4283 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4284 shifted by 18, without any insertion or extraction function.
4285 (insert_cr, extract_cr): Remove.
4287 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4289 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4292 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4294 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4295 * sh-opc.h: Add copyright.
4297 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4299 * Makefile.in (crunch-m68k): Delete extra target accidentally
4300 checked in a while ago.
4302 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4304 * sh-opc.h (sh_table): Add SH3 support.
4306 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4308 * sh-opc.h: Added bsrf and braf.
4310 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4312 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4313 bogus [ls]fm{ea,fd} patterns.
4315 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4316 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4317 initialize it from memory. Make function static.
4318 (print_insn_{big,little}_arm): New functions.
4319 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4320 the correct endianness.
4322 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4324 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4327 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4329 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4330 17th, so that it builds again using GCC as the compiler.
4332 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4334 * mips-dis.c (print_insn_little_mips): Cast return value from
4335 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4336 expects an unsigned long, and that might be fewer words of
4337 argument storage (e.g., if bfd_vma is long long on a 32-bit
4339 (print_insn_big_mips): Likewise with bfd_getb32 value.
4340 (_print_insn_mips): Now static.
4342 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4344 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4345 gcc memory hog problem with initializer is fixed.
4347 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4349 Merge in support for Mac MPW as a host.
4350 (Old change descriptions retained for informational value.)
4352 * mpw-config.in (archname): Compute from the config.
4353 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4355 * mpw-config.in (target_arch): Compute from canonical target.
4356 (m68k, mips, powerpc, sparc): Add architectures.
4357 * mpw-make.in (disassemble.c.o): Add.
4358 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4360 * mpw-config.in (BFD_MACHINES): Set to a default value.
4361 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4363 * mpw-make.in (CSEARCH): Add extra-include to search path.
4365 * mpw-config.in (varargs.h): Don't create.
4366 (sysdep.h): Create using forward-include.
4367 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4369 * mpw-config.in: New file, MPW version of configure.in.
4370 * mpw-make.in: New file, MPW version of Makefile.in.
4372 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4374 * alpha-dis.c (print_insn_alpha): Put empty statement after
4377 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4379 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4380 (low_sign_extend): Likewise.
4381 (get_field): Delete unused function.
4382 (set_field, deposit_14, deposit_21): Likewise.
4384 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4386 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4389 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4391 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4393 * alpha-opc.h (OSF_ASMCODE): define
4394 print pal-code names as defined in App C of the
4395 Alpha Architecture Reference Manual
4397 * alpha-dis.c: cleaned up output
4398 print stylized code forms as defined in App A.4.3 of the
4399 Alpha Architecture Reference Manual
4401 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4403 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4405 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4408 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4410 * m68k-dis.c (opcode): New function. Returns address of opcode
4411 table entry given index, even if the opcode table was split to
4412 work around gcc bugs.
4413 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4415 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4416 (reg_names): Now const.
4417 (print_insn_arg): Arrays cacheFieldName and names now const.
4418 (print_indexed): Array scales now const.
4420 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4422 * ppc-opc.c: Sort recently added instructions by minor opcode
4423 number within major opcode number.
4425 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4427 * hppa-dis.c: Include libhppa.h.
4429 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4431 * mips-opc.c: Change dli to use M_DLI, and add dla.
4433 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4435 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4437 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4439 * mips-opc.c: Add r4650 mul instruction.
4441 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4443 * mips-opc.c: Add uld and usd macros for unaligned double load and
4446 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4448 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4449 mfdcr, mtdcr, icbt, iccci.
4451 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4453 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4454 signed char fields to shorts, more portable.
4456 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4458 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4459 char fields as signed chars, since they may have negative values.
4461 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4463 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4464 (mycroft@netbsd.org).
4466 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4468 From "Logg, Ed" <elogg@ea.com>:
4469 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4470 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4473 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4475 * ppc-opc.c: Changes based on patch from David Edelsohn
4476 <edelsohn@mhpcc.edu>.
4477 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4480 (insert_tbr): New static function.
4481 (extract_tbr): New static function.
4482 (XFXFXM_MASK, XFXM): Define.
4483 (XSPRBAT_MASK, XSPRG_MASK): Define.
4484 (powerpc_opcodes): Add instructions to access special registers by
4485 name. Add mtcr and mftbu.
4487 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4489 * mips-opc.c (P3): Define.
4490 (mips_opcodes): Add mad and madu.
4492 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4494 * configure.in: Add W65 support.
4495 * disassemble.c: Likewise.
4496 * w65-opc.h, w65-dis.c: New files.
4498 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4500 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4503 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4505 * mips-opc.c: Add dli as a synonym for li.
4507 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4509 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4510 print something for reserved opcode values, even if it won't
4513 * mips-dis.c (_print_insn_mips): When initializing, shift right
4514 and mask, to avoid sign extension problems on the Alpha.
4516 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4519 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4521 * sh-opc.h (mov.l gbr): Get direction right.
4522 * sh-dis.c (print_insn_shx): New function.
4523 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4524 print opcodes with right byte order.
4526 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4528 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4529 to avoid conflicts with getopt.
4531 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4533 * hppa-dis.c (print_insn_hppa): Read the instruction using
4534 bfd_getb32, so that it works on a little endian or 64 bit host.
4535 Remove unused local variable op.
4537 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4539 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4540 addu does not work correctly if -mips3.
4542 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4544 * a29k-dis.c (print_special): Add special register names defined
4545 on 29030, 29040 and 29050.
4546 (print_insn): Handle new operand type 'I'.
4548 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4550 * Makefile.in (INSTALL): Use top level install.sh script.
4552 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4554 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4555 that it works on a little endian host.
4557 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4559 * configure.in: Use ${config_shell} when running config.bfd.
4561 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4563 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4565 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4567 * a29k-dis.c (print_insn): Print the opcode.
4569 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4571 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4573 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4575 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4577 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4579 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4580 which store a value into memory.
4582 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4584 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4585 * arm-dis.c, arm-opc.h: New files.
4587 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4589 * Makefile.in (ns32k-dis.o): Add dependency.
4590 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4591 string, not as array of chars.
4593 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4595 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4597 * sparc-opc.c: Added sparclite extended FP operations, and
4598 versions of v9 impdep* instructions permitting specification of
4601 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4603 * i960-dis.c (reg_names): Now const.
4604 (struct sparse_tabent): New type, copied from array type in mem
4606 (ctrl): Local static array ctrl_tab now const.
4607 (cobr): Local static array cobr_tab now const.
4608 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4609 static variable mem_tab no longer explicitly initialized. Changed
4610 mem_init to const array of struct sparse_tabent.
4611 (reg): Local static variable reg_tab no longer explicitly
4612 initialized. Changed reg_init to const array of struct
4614 (ea): Local static array scale_tab now const.
4616 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4619 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4621 * configure.bat: the disassember needs to be enabled for
4622 "objdump -d" to work in djgpp.
4624 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4626 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4627 (invalid_float): Enabled general version, doesn't require running
4628 on ns32k host. Changed to take char* argument, and test for
4629 explicitly specified sizes, instead of using sizeof() on host CPU
4631 (INVALID_FLOAT): Cast first argument.
4632 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4633 list_P032, list_M032): Now const.
4634 (optlist, list_search): Made appropriate arguments now point to
4636 (print_insn_arg): Changed static array of one-character-string
4637 pointers into a static const array of characters; fixed sprintf
4638 statement accordingly.
4640 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4642 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4643 from distribution. A ns32k-dis.c from a previous distribution has
4644 been brought up to date and supports the new interface.
4646 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4648 * configure.in: add bfd_ns32k_arch target support.
4650 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4651 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4653 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4655 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4658 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4660 * h8300-dis.c, mips-dis.c: Don't use true and false.
4662 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4664 * configure.in: Change --with-targets to --enable-targets.
4666 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4668 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4669 opcodes to the first instruction with that opcode, to speed
4670 disassembly of large files. From ralphc@pyramid.com (Ralph
4673 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4675 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4677 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4679 * configure.bat: update to latest makefile.in
4681 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4683 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4684 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4685 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4686 slot insn is in a delay slot.
4687 * z8k-opc.h: (resflg): Fix patterns.
4688 * h8500-opc.h Fix CR insn patterns.
4690 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4693 "cmpl" before POWER versions, so that gas -many uses them.
4695 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4697 * disassemble.c: New file.
4698 * Makefile.in (OFILES): Add disassemble.o.
4699 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4700 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4701 binutils/configure.in.
4703 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4704 opcode being examined.
4706 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4708 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4709 (insert_ral, insert_ram, insert_ras): New functions.
4710 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4711 RAS for store with update.
4713 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4715 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4716 (edelsohn@npac.syr.edu).
4718 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4720 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4723 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4725 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4727 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4729 * ppc-opc.c (powerpc_operands): The signedp field has been
4730 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4731 instead. Add new operand SISIGNOPT.
4732 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4733 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4734 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4737 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4739 * i386-dis.c (struct private): Renamed to dis_private. `private'
4740 is a reserved word for dynix cc.
4742 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4744 * configure.in: Change error message to refer to bfd/config.bfd
4745 rather than bfd/configure.in.
4747 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4749 * ppc-opc.c: Define POWER2 as short alias flag.
4750 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4753 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4755 * i960-dis.c (print_insn_i960): Don't read a second word for
4756 opcodes 0, 1, 2 and 3.
4758 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4760 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4762 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4764 * m68881-ext.c: Removed; no longer used.
4765 * Makefile.in: Changed accordingly.
4767 * m68k-dis.c (ext_format_68881): Don't declare.
4768 (print_insn_m68k): If an instruction uses place 'i', it uses at
4769 least four fixed bytes.
4770 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4771 extended float, convert to double using floatformat_to_double, not
4772 ieee_extended_to_double, and fetch the data before converting it.
4774 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4776 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4777 davidj@ICSI.Berkeley.EDU (David Johnson).
4779 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4781 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4782 PowerPC uses bdnz[l][a].
4784 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4786 * dis-buf.c, i386-dis.c: Include sysdep.h.
4788 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4792 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4793 by Motorola PowerPC 601 with PPC_OPCODE_601.
4794 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4795 Disassemble Motorola PowerPC 601 instructions as well as normal
4796 PowerPC instructions.
4798 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4800 * i960-dis.c (reg, mem): Just use a static array instead of
4803 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4805 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4806 condition name index if this is for a negated condition.
4808 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4809 Floating point format for 'H' operand is backwards from normal
4810 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4811 operands (fmpyadd and fmpysub), handle bizarre register
4812 translation correctly for single precision format.
4814 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4815 or 'I' operands if the next format specifier is 'M' (fcmp
4816 condition completer).
4818 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4821 single number giving a bitmask for the MB and ME fields of an M
4822 form instruction. Change NB to accept 32, and turn it into 0;
4823 also turn 0 into 32 when disassembling. Seperated SH from NB.
4824 (insert_mbe, extract_mbe): New functions.
4825 (insert_nb, extract_nb): New functions.
4826 (SC_MASK): Mask out SA and LK bits.
4827 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4828 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4829 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4830 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4831 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4832 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4833 (powerpc_macros): Define table of macro definitions.
4834 (powerpc_num_macros): Define.
4836 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4837 if PPC_OPERAND_NEXT is set.
4839 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4841 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4842 char. Retrieve contents using bfd_getl32 instead of shifting.
4844 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4846 * ppc-opc.c: New file. Opcode table for PowerPC, including
4847 opcodes for POWER (RS/6000).
4848 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4849 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4850 (CFILES): Add ppc-dis.c.
4851 (ppc-dis.o, ppc-opc.o): New targets.
4852 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4854 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4856 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4857 No space before 'u', 'f', or 'N'.
4859 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4861 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4862 farther than we should.
4864 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4866 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4868 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4870 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4872 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4873 needs it, to prevent reading past the end of a section.
4875 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4877 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4878 Removed t,A case for la; always use t,A(b) case.
4880 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4882 From Ted Lemen <mellon@pepper.ncd.com>
4883 * mips-dis.c (print_insn_arg): Handle 'k'.
4884 * mips-opc.c: Make cache use k, not t.
4886 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4888 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4889 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4890 FLOAT_FORMAT_CODE to put out floating point register names.
4892 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4894 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4896 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4898 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4900 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4902 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4903 larger than 32. Moved dsxx32 variants first for disassembler.
4905 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4907 * z8kgen.c, z8k-opc.h: Add full lda information.
4909 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4911 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4912 movb instructions. Any necessary space will be emitted by
4913 the code to handle nullification completers.
4915 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4919 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4921 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4922 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4924 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4928 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4930 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4931 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4933 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4935 * m88k-dis.c (m88kdis): comment change. Remove space after
4937 (printop): handle new arg types DEC and XREG for m88110.
4939 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4941 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4942 type for absolute branch addresses. Delete special
4943 "ble" and "be" code in 'W' operand code.
4945 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4947 * mips-opc.c: Set hazard information correctly for branch
4948 likely instructions.
4950 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4952 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4953 info->fprintf_func for printing and info->print_address_func for
4956 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4958 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4960 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4962 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4963 Corrected second case of "b" for disassembler.
4965 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4967 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4968 to BFD swapping routines to correspond to BFD name changes.
4970 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4972 * mips-opc.c: Change div machine instruction to be z,s,t rather
4973 than s,t. Change div macro to be d,v,t rather than d,s,t.
4974 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4975 rem and remu which generates only the corresponding div
4976 instruction. This is for compatibility with the MIPS assembler,
4977 which only generates the simple machine instruction when an
4978 explicit destination of $0 is used.
4979 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4981 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4983 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4984 WR_31 hazard for bal, bgezal, bltzal.
4986 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4988 * hppa-dis.c (print_insn_hppa): Use print function
4989 from within the disassemble_info, not fprintf_filtered.
4991 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4993 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4994 Law, law@cs.utah.edu.)
4996 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4998 * mips-opc.c ("absu"): Removed.
5001 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5003 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5004 Changed hazard information to distinguish between memory load
5005 delays and coprocessor load delays.
5007 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5009 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5011 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5013 * configure.in: Don't pass cpu to config.bfd.
5015 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5017 * m88k-dis.c (m88kdis): Make class unsigned.
5019 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5021 * alpha-dis.c (print_insn_alpha): One branch format case was
5022 missing the instruction name.
5024 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5026 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5027 Add the arch-specific auxiliary files.
5028 (OFILES): Remove the arch-specific auxiliary files
5029 and use BFD_MACHINES instead of DIS_LIBS.
5030 * configure.in: Set BFD_MACHINES based on --with-targets option.
5032 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5034 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5037 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5039 * sparc-opc.c: Change CONST to const to deal with gcc
5040 -Dconst=__const -traditional.
5042 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5044 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5045 coprocessor instructions out of #if 0, and made them use new
5048 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5050 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5052 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5054 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5055 instruction, for use by the disassembler.
5057 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5058 hand-coded sign extensions that depended on 32-bit host ints.
5059 FIXME, we still depend on big-endian host bitfield ordering.
5060 (sparc_print_insn): Set the insn_info_valid field, and the
5061 other fields that describe the instruction being printed.
5063 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5065 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5066 `jmp' instead of just one of them.
5068 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5070 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5071 (fput_fp_reg_r): Renamed from fput_reg_r.
5072 (fput_fp_reg): New function.
5073 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5075 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5077 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5079 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5081 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5083 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5084 don't output a space.
5086 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5088 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5090 * mips-opc.c: New file, containing opcode table from
5091 ../include/opcode/mips.h.
5092 * Makefile.in: Add it.
5094 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5096 * m88k-dis.c: New file, moved in from gdb and changed to use the
5097 new dis-asm.h disassembler interface.
5098 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5099 (m88k-dis.o): New target.
5101 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5103 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5104 argument string const char * to correspond to opcode/mips.h.
5106 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5108 * mips-dis.c: Updated to account for name changes in new version
5110 * Makefile.in: Added header file dependencies.
5112 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5114 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5116 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5118 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5119 extend, rather than shifts.
5121 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5123 * Makefile.in: Undo 15 June change.
5125 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5127 * m68k-dis.c (print_insn_arg): Change return value to byte count
5129 * m68k-dis.c: Re-write to detect invalid operands before
5130 printing anything, so we can handle this the same way we
5131 handle invalid opcodes.
5133 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5135 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5137 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5139 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5142 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5144 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5146 * configure.in: Do make sysdep.h link.
5147 * Makefile.in: Search ../include. Don't search ../bfd.
5149 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5151 Changes from Jeff Law, law@cs.utah.edu:
5152 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5153 Do not print a space before the completers specified by
5156 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5158 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5159 defined, since gdb has been fixed.
5161 Changes from Jeff Law, law@cs.utah.edu:
5162 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5163 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5164 be a *disassemble_info, not a *FILE.
5165 * hppa-dis.c: Support 'd', '!', and 'a'.
5166 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5167 * hppa-dis.c: Delete cases which are no longer needed.
5169 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5171 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5173 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5175 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5178 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5180 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5181 * configure.in: No longer need to configure to get sysdep.h.
5183 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5185 * Patches from Jeffrey Law <law@cs.utah.edu>.
5186 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5187 templates for 1.1 FP computational instructions.
5189 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5191 * h8500-dis.c (print_insn_h8500): Address argument is type
5193 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5196 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5197 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5199 * sparc-dis.c (compare_opcodes): Move static declaration to
5202 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5204 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5205 instruction, remove unimp hack from 'l' argument.
5207 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5209 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5212 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5214 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5215 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5218 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5220 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5221 arrays of string pointers to 2-d arrays of chars, to save
5224 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5226 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5227 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5229 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5231 * hppa-dis.c: New file from Utah, adapted to new disassembler
5233 * Makefile.in: Include it.
5235 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5237 * sh-dis.c, sh-opc.h: New files.
5239 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5241 * alpha-dis.c, alpha-opc.h: New files.
5243 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5245 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5248 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5250 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5252 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5254 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5257 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5259 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5260 and double percent signs a few places.
5262 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5264 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5265 Use info->print_address_func not print_address.
5267 * dis-buf.c (generic_print_address): New function.
5269 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5271 * Makefile.in: Add sparc-dis.c.
5272 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5274 Add `add' instruction to the set that get checked
5275 for a preceding `sethi' in order to print an absolute address.
5276 * (print_insn): Disassembly prefers real instructions.
5277 (is_delayed_branch): Speed up.
5278 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5279 Still missing some float ops, and needs testing.
5280 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5281 F_ALIAS. Use printf, not fprintf, when not passing a file
5283 (compare_opcodes): Check that identical instructions have
5284 identical opcodes, complain otherwise.
5287 * Include reg_names.
5289 Use dis-asm.h/read_memory_func interface.
5291 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5293 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5294 deliberately return non-zero to setjmp from longjmp. Otherwise
5295 this code fails to compile.
5297 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5299 * m68k-dis.c: Fix prototype for fetch_arg().
5301 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5303 * dis-buf.c: New file, for new read_memory_func interface.
5304 Makefile.in (OFILES): Include it.
5305 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5306 Use new read_memory_func interface.
5308 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5310 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5311 * h8500-opc.h: Fix couple of opcodes.
5313 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5315 * Makefile.in: add dvi & installcheck targets
5317 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5319 * Makefile.in: Update for h8500-dis.c.
5321 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5323 * h8500-dis.c, h8500-opc.h: New files
5325 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5327 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5328 ../include/dis-asm.h.
5329 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5330 and ../gdb/m68k-pinsn.c).
5331 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5332 and ../gdb/i386-pinsn.c).
5333 * m68881-ext.c: New file. Moved definition of
5334 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5335 * Makefile.in: Adjust for new files.
5336 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5337 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5338 can be dis-assembled.
5340 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5342 * mips-dis.c (print_insn_arg): Now returns void.
5344 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5346 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5347 files that use the macros.
5349 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5351 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5352 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5353 (CFILES): Added mips-dis.c.
5355 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5357 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5358 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5360 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5362 * Makefile.in: Improve *clean rules.
5363 * configure.in: Allow a default host.
5365 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5367 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5368 files include other sysdep files
5370 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5372 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5374 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5376 * configure.in: For host support, use ../bfd/configure.host
5377 so it stays in sync with the ../bfd/hosts database.
5379 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5381 * configure.in: use cpu-vendor-os triple instead of nested cases
5383 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5385 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5386 *always* the wrong one.
5388 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5390 * z8kgen.c: added copyright info
5392 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5394 * z8k-dis.c (unparse_instr): prettier tabs
5395 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5397 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5399 * configure.in: Add ncr* configuration.
5400 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5401 picayune ANSI compilers happy.
5403 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5405 * configure.in (i386): Make i386 and i486 synonymous for now.
5406 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5408 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5410 * Makefile.in (install): Fix typo.
5412 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5414 * Makefile.in (make): Remove obsolete crud.
5415 (sparc-opc.o): Avoid Sun Make VPATH bug.
5417 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5419 * Makefile.in: since there are no SUBDIRS, remove rule and
5420 references of subdir_do.
5422 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5424 * Makefile.in (install): Get the library name right here too.
5425 Don't install bfd.h, since it's unrelated to this library. No
5426 subdirs to recurse into, either.
5427 (CFILES): The source file has a .c suffix, not .o.
5429 * sparc-opc.c: New file, moved from BFD.
5430 * Makefile.in (OFILES): Build it.
5432 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5434 * z8k-dis.c: fixed forward refferences of some declarations.
5436 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5438 * Makefile.in: get the name of the library right
5440 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5442 * z8k-dis.c: knows how to disassemble z8k stuff
5443 * z8k-opc.h: new file full of z8000 opcodes
5447 version-control: never
projects / platform / upstream / binutils.git / blob