2 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
4 * mips-opc.c (c.lt.s): Add r5900 variant.
8 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
10 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
11 table provided entry size. Use CGEN_INSN_MNEMONIC.
12 (cgen_parse_keyword): Rewrite.
13 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
14 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
15 * cgen-opc.c: Clean up pass over `struct foo' usage.
16 (cgen_keyword_lookup_value): Handle "" entry.
17 (cgen_keyword_add): Likewise.
19 * Makefile.am: Add cgen support.
20 * Makefile.in: Regenerate.
21 * configure.in: Add cgen support.
22 * configure: Regenerate.
23 * aclocal.m4: Regenerate.
24 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
28 Tue Jan 6 13:08:14 1998 Doug Evans <devans@seba.cygnus.com>
30 * txvu-dis.c (print_insn_txvu): Handle no separator between
31 upper and lower insn #ifndef VERTICAL_BAR_SEPARATOR.
33 Mon Jan 5 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
35 * txvu-dis.c, txvu-opc.c: New files.
36 * configure.in: Compile them.
37 * configure: Regenerate.
38 * Makefile.am (ALL_MACHINES): Add txvu-{dis,opc}.lo.
39 (txvu-dis.lo,txvu-opc.lo): Add rules for.
40 * Makefile.in: Regenerate.
42 Mon Dec 22 17:17:03 1997 Doug Evans <devans@canuck.cygnus.com>
44 * configure.in: Add txvu support.
45 * configure: Regenerate.
46 * disassemble.c: Add txvu support.
49 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
51 * mips-opc.c: Add FP_D to s.d instruction flags.
53 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
55 * m68k-opc.c (halt, pulse): Enable them on the 68060.
58 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
60 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
61 PC relative offset forms before the 15 bit forms. An assembler command
62 line option now chooses the default.
66 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
68 * mips-opc.c: Add many missing r5900 instructions.
72 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
74 * d30v-opc.c (d30v_opcode_table): Set new flags bits
75 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
78 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
80 * configure: Only build libopcodes shared if --enable-shared's value
81 was `yes', or was set to `*opcodes*'.
82 * aclocal.m4: Likewise.
83 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
84 original source of this bit of code. It's not clear what the best fix
88 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
90 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
93 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
95 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
96 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
97 offset forms before the 15 bit forms, to default to the long forms.
100 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
102 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
104 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
106 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
107 symbol if none is present.
108 (print_insn_big_arm): Prevent examination of stored symbol if
111 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
113 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
115 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
117 * disassemble.c: Remove disasm_symaddr() function.
119 * arm-dis.c: Use info->symbol instead of info->flags to determine
120 if disassmbly should be in Thumb or Arm mode.
122 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
124 * arm-dis.c: Add support for disassembling Thumb opcodes.
125 (print_insn_thumb): New function.
127 * disassemble.c (disasm_symaddr): New function.
129 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
130 (thumb_opcodes): Table of Thumb opcodes.
132 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
134 * m68k-opc.c (btst): Change Dd@s to Dd;b.
136 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
137 and 'v' as operand types.
139 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
141 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
142 <olivier.carmona@di.epfl.ch>.
143 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
144 which has a two word opcode with a one word argument.
147 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
149 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
150 unsigned, not signed.
151 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
155 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
157 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
158 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
159 (ftrv): Slay the cut-and-paste monster.
162 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
164 * d10v-dis.c (print_operand):
165 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
167 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
169 * d10v-opc.c (OPERAND_FLAG): Split into:
170 (OPERAND_FFLAG, OPERAND_CFLAG) .
174 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
176 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
177 field for all INSN_MACRO's.
180 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
182 * mips-opc.c (sync,cache): These are 3900 insns.
184 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
186 sh-opc.h (sh_table): Remove ftst/nan.
188 start-sanitize-vr5400
189 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
191 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
192 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
194 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
198 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
200 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
201 Add tx49 insns and configury.
204 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
206 * mips-opc.c (ffc, ffs): Fix mask.
209 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
211 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
215 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
217 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
218 start-sanitize-vr5400
219 Added VR5400 instructions.
220 (N5): New cpu-id macro.
222 (WR_HILO, RD_HILO, MOD_HILO): New macros.
224 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
226 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
227 (WR_HILO, RD_HILO, MOD_HILO): New macros.
229 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
231 * v850-dis.c (disassemble): Replace // with /* ... */
233 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
235 * sparc-opc.c: Add wr & rd for v9a asr's.
236 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
237 (v9a_asr_reg_names): New variable.
238 Patch from David Miller <davem@vger.rutgers.edu>.
240 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
242 * sparc-opc.c (v9notv9a): New insn type.
243 (IMPDEP): Move to the end to not conflict with edge8 et al.
244 Patch from David Miller <davem@vger.rutgers.edu>.
246 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
248 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
250 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
252 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
254 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
256 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
257 of disassemble_info structure to determine if an overlay address
258 has a matching symbol in low memory.
260 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
261 new symbol_at_address_func field in disassemble_info structure.
263 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
265 * v850-opc.c (extract_d22): Use signed arithmatic.
267 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
269 * mips-opc.c: Three op mult is not an ISA insn.
271 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
273 * mips-opc.c: Fix formatting.
275 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
277 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
278 than assuming that char is signed. Explicitly sign extend 16 bit
279 values, rather than assuming that short is 16 bits.
280 (OP_sI, OP_J, OP_DIR): Likewise.
283 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
285 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
289 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
291 * v850-opc.c: Fix typo in comment.
293 * v850-dis.c (disassemble): Add test of processor type when
296 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
298 * configure.in: Use a diversion to set enable_shared before the
299 arguments are parsed.
300 * configure: Rebuild.
302 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
304 * m68k-opc.c (TBL1): Use ! rather than `.
305 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
307 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
309 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
311 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
313 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
316 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
317 * aclocal.m4: Rebuild with new libtool.
318 * configure: Rebuild.
321 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
323 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
326 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
328 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
330 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
332 * v850-opc.c (v850_opcodes): Further rearrangements.
335 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
337 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
340 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
342 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
345 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
347 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
349 * mips16-opc.c: Added mips16 sdbbp.
352 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
354 * v850-opc.c: Initialise processors field of v850_opcode structure.
357 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
359 Merge changes from Martin Hunt:
361 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
363 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
364 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
365 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
367 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
369 * d30v-dis.c (print_insn): First operand of d*i (delayed
370 branch) instructions is relative.
372 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
373 (d30v_operand_table): Add IMM6S3 type.
374 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
376 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
377 and cmp instructions.
379 * d30v-opc.c: Correct entries for repeat*, and sat*.
380 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
381 types. Correct several formats.
383 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
385 * d30v-opc.c (pre_defined_registers): Change control registers.
387 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
388 SHORT_C2. Manual was incorrect.
390 * d30v-dis.c (lookup_opcode): Return value now indicates
391 if an opcode has a short and a long form. Used for deciding
392 to append a ".s" or ".l".
393 (print_insn): Append a ".s" to an instruction if it is
394 the short form and ".l" if it is a long form. Do not append
395 anything if the instruction has only one possible size.
397 * d30v-opc.c: Change mulx2h to require an even register.
398 New form: SHORT_A2; a SHORT_A form that needs an even
399 register as the first operand.
401 * d30v-dis.c (print_insn_d30v): Fix problem where the last
402 instruction was not being disassembled if there were an odd
403 number of instructions.
405 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
409 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
411 * v850-dis.c (disassemble): Improved display of register lists.
414 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
416 * sparc-opc.c (sparc_opcodes): Fix assembler args to
417 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
418 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
419 fandnot1s, fandnot2s.
421 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
423 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
425 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
427 * cgen-asm.c (cgen_parse_address): New argument resultp.
429 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
431 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
433 * mn10200-dis.c (disassemble): PC relative instructions are
434 relative to the next instruction, not the current instruction.
436 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
438 * v850-dis.c (disassemble): Only signed extend values that are not
439 returned by extract functions.
440 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
442 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
444 * v850-opc.c: Update comments. Remove use of
445 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
447 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
449 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
451 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
453 * configure: Rebuilt with latest devo autoconf for NT support.
455 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
457 * v850-dis.c (disassemble): Use curly brace syntax for register
460 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
461 where r0 is being used as a destination register.
464 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
466 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
470 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
472 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
473 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
474 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
475 Add insns to access SGR and DBR.
476 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
479 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
481 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
484 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
486 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
487 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
490 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
492 * configure (cgen_files): Add support for v850e target.
493 * configure.in (cgen_files): Add support for v850e target.
495 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
497 * configure (cgen_files): Add support for v850ea target.
498 * configure.in (cgen_files): Add support for v850ea target.
501 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
503 * configure.in (bfd_arc_arch): Add.
504 * configure: Rebuild.
505 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
506 * Makefile.in: Rebuild.
507 * arc-dis.c, arc-opc.c: New files.
508 * disassemble.c (ARCH_all): Define ARCH_arc.
509 (disassembler): Add ARC support.
511 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
514 * v850-dis.c (disassemble): Add support for v850EA instructions.
516 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
517 (v850_opcodes): Add v850EA instructions.
519 * v850-dis.c (disassemble): Add support for v850E instructions.
521 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
522 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
523 insert_spe, extract_spe): New Functions.
524 (v850_opcodes): Add v850E instructions.
527 * v850-opc.c: Reorganised and re-layed out to improve readability
530 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
532 * configure: Rebuild with autoconf 2.12.1.
534 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
536 * aclocal.m4, configure: Rebuild with new automake patches.
538 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
540 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
541 * acinclude.m4: Just include acinclude.m4 from BFD.
542 * aclocal.m4, configure: Rebuild.
544 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
546 * Makefile.am: New file, based on old Makefile.in.
547 * acconfig.h: New file.
548 * acinclude.m4: New file.
549 * stamp-h.in: New file.
550 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
551 Removed shared library handling; now handled by libtool. Replace
552 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
553 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
554 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
555 handling in AC_OUTPUT.
556 * dep-in.sed: Change .o to .lo.
557 * Makefile.in: Now built with automake.
558 * aclocal.m4: Now built with aclocal.
559 * config.in, configure: Rebuild.
561 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
563 * mips-opc.c: Fix typo/thinko in "eret" instruction.
566 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
568 * mips-opc.c: Fix coding of mtsa.
571 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
573 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
575 * sparc-dis.c (sorted_opcodes): New static local.
576 (struct opcode_hash): `opcode' is pointer to const element.
577 (build_hash): First arg is now table of sorted pointers.
578 (print_insn_sparc): Sort opcodes by sorting table of pointers.
579 (compare_opcodes): Update.
581 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
583 * cgen-opc.c: #include <ctype.h>.
584 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
585 Handle case insensitive hashing.
586 (hash_keyword_value): Change type of `value' to unsigned int.
588 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
590 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
591 precision FP, mark it as such. Likewise for double precision
592 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
595 (mips_builtin_opcodes): Remove non-existant r5900 instructions
599 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
601 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
602 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
605 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
607 * ppc-opc.c (extract_nsi): make unsigned expression signed before
609 (UNUSED): remove one level of parens, so MSVC doesn't choke on
610 nesting depth when all the macros are expanded.
612 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
614 * sparc-opc.c: The fcmp v9a instructions take an integer register
615 as a destination, not a floating point register. From Christian
616 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
618 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
620 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
621 syntax. From Roman Hodek
622 <rnhodek@faui22c.informatik.uni-erlangen.de>.
624 * i386-dis.c (twobyte_has_modrm): Fix pand.
626 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
628 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
630 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
632 * arm-dis.c: Add prototypes for arm_decode_shift and
635 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
637 * mips-opc.c: Add r3900 insns.
639 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
641 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
642 print delay slot instructions on the same line. When using a PC
643 relative load, add a comment with the value being loaded if it can
646 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
648 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
649 to pushS/popS for segment regs and byte constant so that
650 pushw/popw printed when in 16 bit data mode.
652 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
653 print cbtw, cwtd in 16 bit data mode.
654 * i386-dis.c (putop): extra case W to support above.
656 * i386-dis.c (print_insn_x86): print addr32 prefix when given
657 address size prefix in 16 bit address mode.
659 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
661 * sh-dis.c: Reindent. Rename local variable fprintf to
664 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
666 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
668 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
670 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
672 * mips16-opc.c (mip16_opcodes): same.
674 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
676 * m68k-opc.c (moveb): Change $d to %d.
678 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
680 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
681 (twobyte_has_modrm): Likewise.
683 (OP_MMX, OP_EM, OP_MS): New static functions.
685 * i386-dis.c: Revert patch of April 4. The output now matches
688 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
690 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
693 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
695 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
697 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
699 * Makefile.in (install): Depend upon installdirs.
700 (installdirs): New target.
702 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
704 From Thomas Graichen <graichen@rzpd.de>:
705 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
706 * configure: Rebuild.
708 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
710 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
711 Delete string{,s}.h support.
713 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
715 * cgen-asm.c (cgen_parse_operand_fn): New global.
716 (cgen_parse_{{,un}signed_integer,address}): Update call to
717 cgen_parse_operand_fn.
718 (cgen_init_parse_operand): New function.
719 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
720 from cgen_asm_init_parse.
721 (m32r_cgen_assemble_insn): New operand `errmsg'.
722 Delete call to as_bad, return error message to caller.
723 (m32r_cgen_asm_hash_keywords): #if 0 out.
725 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
727 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
729 [case 'J']: Fix typo in register name.
731 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
733 * configure.in: Substitute SHLIB_LIBS.
734 * configure: Rebuild.
735 * Makefile.in (SHLIB_LIBS): New variable.
736 ($(SHLIB)): Use $(SHLIB_LIBS).
738 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
740 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
742 * cgen-opc.c (hash_keyword_name): Improve algorithm.
744 * disassemble.c (disassembler): Handle m32r.
746 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
748 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
749 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
750 * Makefile.in (CFILES): Add them.
751 (ALL_MACHINES): Add them.
752 (dependencies): Regenerate.
753 * configure.in (cgen_files): New variable.
754 (bfd_m32r_arch): Add entry.
755 * configure: Regenerate.
757 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
759 * configure.in: Correct file names for bfd_mn10[23]00_arch.
760 * configure: Rebuild.
762 * Makefile.in: Rebuild dependencies.
764 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
766 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
769 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
771 * Branched binutils 2.8.
773 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
775 * m10200-dis.c: Rename from mn10200-dis.c.
776 * m10200-opc.c: Rename from mn10200-opc.c.
777 * m10300-dis.c: Rename from mn10300-dis.c
778 * m10300-opc.c: Rename from mn10300-opc.c.
779 * Makefile.in: Update accordingly.
781 * mips16-opc.c: Add mul and dmul macros.
783 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
785 * makefile.vms: Update CFLAGS, add clean target.
787 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
789 * mips-opc.c: Add "wait". From Ralf Baechle
790 <ralf@gnu.ai.mit.edu>.
792 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
793 * configure, config.in: Rebuild.
794 * sysdep.h: Include <stdlib.h> if it exists.
795 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
797 * Makefile.in: Rebuild dependencies.
799 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
801 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
802 Andrew Bray <andy@madhouse.demon.co.uk>.
804 * mips-opc.c: Add cast when setting mips_opcodes.
806 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
808 * v850-dis.c (disassemble): Fix sign extension problem.
809 * v850-opc.c (extract_d*): Fix sign extension problems to make
810 disassembly calculate branch offsets correctly.
812 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
814 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
816 * mips-opc.c: Add dctr and dctw.
819 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
821 * d30v-dis.c (print_insn): Change the way signed constants
824 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
826 * Makefile.in (BFD_H): New variable.
827 (HFILES): New variable.
828 (CFILES): Add all C files.
829 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
830 Delete old dependencies, and build new ones.
831 * dep-in.sed: New file.
833 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
835 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
837 start-sanitize-coldfire
838 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
840 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
843 end-sanitize-coldfire
844 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
846 * mn10200-opc.c: Change "trap" to "syscall".
847 * mn10300-opc.c: Add new "syscall" instruction.
849 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
851 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
852 mulul insns on the coldfire.
854 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
856 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
857 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
858 (print_insn_little_arm): Likewise.
860 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
862 Based on patches from H.J. Lu <hjl@lucon.org>:
863 * i386-dis.c (fetch_data): Add prototype.
864 * m68k-dis.c (fetch_data): Add prototype.
865 (dummy_print_address): Add prototype. Make static.
866 * ppc-opc.c (valid_bo): Add prototype.
867 * sparc-dis.c (build_hash_table): Add prototype.
868 (is_delayed_branch, compute_arch_mask): Add prototypes.
869 (print_insn_sparc): Make several local variables const.
870 (compare_opcodes): Change arguments to const PTR. Add prototype.
871 * sparc-opc.c (arg): Change name field to be const.
872 (lookup_name, lookup_value): Add prototypes. Change table and
873 name parameters to be const.
874 (sparc_encode_asi): Change name parameter to be const.
875 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
876 (sparc_encode_sparclet_cpreg): Likewise.
877 (sparc_decode_asi): Change return type to be const.
878 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
879 (sparc_decode_sparclet_cpreg): Likewise.
881 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
883 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
884 Solaris doesn't like the combined options, and the -f is
886 (stamp-tshlink, install): Likewise.
888 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
890 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
893 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
895 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
897 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
899 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
902 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
904 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
907 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
909 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
911 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
913 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
916 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
918 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
919 floatformat_to_double to make portable.
920 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
923 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
925 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
926 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
928 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
930 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
931 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
934 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
936 * tic80-opc.c (LSI_SCALED): Renamed from this ...
937 (OFF_SL_BR_SCALED): ... to this, and added the flag
938 TIC80_OPERAND_BASEREL to the flags word.
939 (tic80_opcodes): Replace all occurances of LSI_SCALED with
943 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
945 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
946 Change mips_opcodes from const array to a pointer,
947 and change bfd_mips_num_opcodes from const int to int,
948 so that we can increase the size of the mips opcodes table
952 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
954 * tic80-opc.c (tic80_predefined_symbols): Revert change to
955 store BITNUM values in the table in one's complement form
956 to match behavior when assembler is given a raw numeric
957 value for a BITNUM operand.
958 * tic80-dis.c (print_operand_bitnum): Ditto.
962 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
964 * d30v-opc.c: Removed references to FLAG_X.
967 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
969 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
972 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
974 * Makefile.in: Added d30v object files.
975 * configure: (bfd_d30v_arch) Rebuilt.
976 * configure.in: (bfd_d30v_arch) Added new case.
977 * d30v-dis.c: New file.
978 * d30v-opc.c: New file.
979 * disassemble.c (disassembler) Add entry for d30v.
983 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
985 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
986 representations for the floating point BITNUM values.
988 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
990 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
991 in the table in one's complement form, as they appear in the
993 (tic80_symbol_to_value): Use macros to access predefined
995 (tic80_value_to_symbol): Ditto.
996 (tic80_next_predefined_symbol): New function.
997 * tic80-dis.c (print_operand_bitnum): Remove code that did
998 one's complement for BITNUM values.
1001 start-sanitize-r5900
1002 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1004 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1007 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1009 * makefile.vms: Remove 8 bit characters. Update to latest
1012 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1014 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1016 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1018 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1019 (IMM24_PCREL): Likewise.
1021 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1023 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1024 address for an extended PC relative instruction that is not a
1027 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1029 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1032 start-sanitize-tic80
1033 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1035 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1036 (tic80_opcodes): Sort entries so that long immediate forms
1037 come after short immediate forms, making it easier for
1038 assembler to select the right one for a given operand.
1041 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1043 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1045 (print_insn_mips16): Likewise.
1047 start-sanitize-r5900
1048 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1050 * mips-opc.c: add r5900.
1053 start-sanitize-tic80
1054 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1056 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1057 a symbol class that restricts translation to just that
1058 class (general register, condition code, etc).
1060 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1062 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1063 and REG_DEST_E for register operands that have to be
1064 an even numbered register. Add REG_FPA for operands that
1065 are one of the floating point accumulator registers.
1066 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1067 (tic80_opcodes): Change entries that need even numbered
1068 register operands to use the new operand table entries.
1069 Add "or" entries that are identical to "or.tt" entries.
1072 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1074 * mips16-opc.c: Add new cases of exit instruction for
1076 * mips-dis.c (print_mips16_insn_arg): Display floating point
1077 registers in operands of exit instruction. Print `$' before
1078 register names in operands of entry and exit instructions.
1080 start-sanitize-tic80
1081 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1083 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1084 pairs for all predefined symbols recognized by the assembler.
1085 Also used by the disassembling routines.
1086 (tic80_symbol_to_value): New function.
1087 (tic80_value_to_symbol): New function.
1088 * tic80-dis.c (print_operand_control_register,
1089 print_operand_condition_code, print_operand_bitnum):
1090 Remove private tables and use tic80_value_to_symbol function.
1093 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1095 * d10v-dis.c (print_operand): Change address printing
1096 to correctly handle PC wrapping. Fixes PR11490.
1098 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1100 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1103 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1105 * mips-dis.c (print_insn_mips16): Set insn_info information.
1106 (print_mips16_insn_arg): Likewise.
1108 * mips-dis.c (print_insn_mips16): Better handling of an extend
1109 opcode followed by an instruction which can not be extended.
1111 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1113 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1114 coldfire moveb instruction to not allow an address register as
1115 destination. Although the documentation does not indicate that
1116 this is invalid, experiments uncovered unexpected behavior.
1117 Added a comment explaining the situation. Thanks to Andreas
1118 Schwab for pointing this out to me.
1120 start-sanitize-tic80
1121 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1123 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1124 entries are presorted so that entries with the same mnemonic are
1125 adjacent to each other in the table. Sort the entries for each
1126 instruction so that this is true.
1129 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1131 * m68k-dis.c: Include <libiberty.h>.
1132 (print_insn_m68k): Sort the opcode table on the most significant
1133 nibble of the opcode.
1135 start-sanitize-tic80
1136 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1138 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1139 "vsub", "vst", "xnor", and "xor" instructions.
1140 (V_a1): Renamed from V_a, msb of accumulator reg number.
1141 (V_a0): Add macro, lsb of accumulator reg number.
1143 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1145 * tic80-dis.c (print_insn_tic80): Broke excessively long
1146 function up into several smaller ones and arranged for
1147 the instruction printing function to be callable recursively
1148 to print vector instructions that have both a load and a
1149 math instruction packed into a single opcode.
1150 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1151 to explain why it comes after the other vector opcodes.
1154 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1156 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1157 move insns to handle immediate operands.
1159 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1161 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1162 fix operand mask in the "moveml" entries for the coldfire.
1164 start-sanitize-tic80
1165 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1167 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1168 New macros for building vector instruction opcodes.
1169 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1170 FMT_LI, which were unused. The field is now a flags field.
1171 Remove some opcodes that are possible, but illegal, such
1172 as long immediate instructions with doubles for immediate
1173 values. Add "vadd" and "vld" instructions.
1175 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1177 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1178 the order more logical. Move the shift alias instructions ("rotl",
1179 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1180 interspersed with the regular sr.x and sl.x instructions. Add
1181 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1182 "sub", "subu", "swcr", and "trap".
1184 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1186 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1187 (OFF_SL_PC): Renamed from OFF_SL.
1188 (OFF_SS_BR): New operand type for base relative operand.
1189 (OFF_SL_BR): New operand type for base relative operand.
1190 (REG_BASE): New operand type for base register operand.
1191 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1192 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1193 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1195 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1196 10 char field, padded with spaces on rhs, rather than a string
1197 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1198 than old TIC80_OPERAND_RELATIVE. Add support for new
1199 TIC80_OPERAND_BASEREL flag bit.
1201 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1203 * tic80-dis.c (print_insn_tic80): Print floating point operands
1205 * tic80-opc.c (SPFI): Add single precision floating point
1206 immediate operand type.
1207 (ROTATE): Add rotate operand type for shifts.
1208 (ENDMASK): Add for shifts.
1209 (n): Macro for the 'n' bit.
1210 (i): Macro for the 'i' bit.
1211 (PD): Macro for the 'PD' field.
1212 (P2): Macro for the 'P2' field.
1213 (P1): Macro for the 'P1' field.
1214 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1218 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1220 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1221 adding in current address for pc-relative operands.
1223 start-sanitize-tic80
1224 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1226 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1227 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1228 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1229 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1230 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1231 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1232 (REG_SCALED, LSI_SCALED): New operand types.
1233 (E): New macro for 'E' bit at bit 27.
1234 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1235 opcodes, including the various size flavors (b,h,w,d) for
1236 the direct load and store instructions.
1238 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1240 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1242 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1243 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1244 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1245 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1246 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1247 masks with "MASK_* & ~M_*" to get the M bit reset.
1248 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1250 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1252 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1253 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1254 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1256 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1257 CC, SICR, and LICR table entries.
1258 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1259 "bcnd", and "brcr" opcodes.
1262 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1264 * ppc-opc.c (powerpc_operands): Make comment match the
1265 actual fields (no shift field).
1266 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1267 start-sanitize-tic80
1268 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1269 partial implementation, work in progress.
1270 * tic80-opc.c (tic80_operands): Begin construction operands table.
1271 (tic80_opcodes): Continue populating opcodes table and start
1272 filling in the operand indices.
1273 (tic80_num_opcodes): Add this.
1276 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1278 * m68k-opc.c: Add #B case for moveq.
1280 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1282 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1283 before they are used.
1285 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1287 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1288 for "breakpoint" instruction.
1290 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1292 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1293 (dep): Use ALL_CFLAGS rather than CFLAGS.
1295 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1297 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1300 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1302 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1303 start-sanitize-tic80
1304 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1307 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1309 * mips16-opc.c: Add "abs".
1311 start-sanitize-tic80
1312 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1314 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1315 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1316 (disassembler): Add bfd_arch_tic80 support to set disassemble
1317 to print_insn_tic80.
1318 * tic80-dis.c (print_insn_tic80): Add stub.
1320 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1322 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1323 * configure: Regenerate with autoconf.
1324 * tic80-dis.c: Add file.
1325 * tic80-opc.c: Add file.
1328 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1330 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1332 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1334 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1335 (mn10200_opcodes): Use it for some logicals and btst insns.
1336 Add "break" and "trap" instructions.
1338 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1340 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1342 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1344 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1345 relative load or add now depends upon whether the instruction is
1348 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1350 * mn10200-dis.c: Finish writing disassembler.
1351 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1352 Fix mask for "jmp (an)".
1354 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1355 handle endianness issues for mn10300.
1357 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1359 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1361 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1362 instruction. Fix opcode field for "movb (imm24),dn".
1364 * mn10200-opc.c (mn10200_operands): Fix insertion position
1367 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1369 * mn10200-opc.c: Create mn10200 opcode table.
1370 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1371 but moving along nicely.
1373 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1375 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1377 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1379 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1380 specifiers for fmovem* instructions.
1382 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1384 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1386 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1388 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1391 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1393 * mn10300-opc.c: Add some comments explaining the various
1396 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1398 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1400 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1403 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1404 operand specifiers in fmovm* instructions.
1406 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1408 * ppc-opc.c (insert_li): Give an error if the offset has the two
1409 least significant bits set.
1411 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1413 * mips-dis.c (print_insn_mips16): Separate the instruction from
1414 the arguments with a tab, not a space.
1416 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1418 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1421 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1424 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1426 * configure: Rebuild with autoconf 2.12.
1428 Add support for mips16 (16 bit MIPS implementation):
1429 * mips16-opc.c: New file.
1430 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1431 (mips16_reg_names): New static array.
1432 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1433 after seeing a 16 bit symbol.
1434 (print_insn_little_mips): Likewise.
1435 (print_insn_mips16): New static function.
1436 (print_mips16_insn_arg): New static function.
1437 * mips-opc.c: Add jalx instruction.
1438 * Makefile.in (mips16-opc.o): New target.
1439 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1440 * configure: Rebuild.
1442 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1444 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1445 operand specifiers in *save, *restore and movem* instructions.
1447 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1450 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1451 register operands for immediate arithmetic, not, neg, negx, and
1452 set according to condition instructions.
1454 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1455 specifier of the effective-address operand in immediate forms of
1456 arithmetic instructions. The specifier for the immediate operand
1457 notes how and where the constant will be stored.
1459 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1461 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1464 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1467 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1469 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1471 * mn10300-dis.c (disassemble): Handle register lists.
1473 * mn10300-opc.c: Fix handling of register list operand for
1474 "call", "ret", and "rets" instructions.
1476 * mn10300-dis.c (disassemble): Print PC-relative and memory
1477 addresses symbolically if possible.
1478 * mn10300-opc.c: Distinguish between absolute memory addresses,
1479 pc-relative offsets & random immediates.
1481 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1483 (disassemble): Handle SPLIT and EXTENDED operands.
1485 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1487 * mn10300-dis.c: Rough cut at printing some operands.
1489 * mn10300-dis.c: Start working on disassembler support.
1490 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1492 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1494 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1496 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1498 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1500 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1502 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1503 register argument is calls and jmp instructions.
1505 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1507 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1508 getx operand. Fix opcode for mulqu imm,dn.
1510 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1512 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1513 in MN10300_OPERAND_SPLIT operands for how many bits
1514 appear in the basic insn word. Add IMM32_HIGH24,
1515 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1516 (mn10300_opcodes): Use new operands as needed.
1518 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1519 for bset, bclr, btst instructions.
1520 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1522 * mn10300-opc.c (mn10300_operands): Remove many redundant
1523 operands. Update opcode table as appropriate.
1524 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1525 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1527 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1529 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1530 operands (for indexed load/stores). Fix bitpos for DI
1531 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1532 few instructions that insert immediates/displacements in the
1533 middle of the instruction. Add IMM8E for 8 bit immediate in
1534 the extended part of an instruction.
1535 (mn10300_operands): Use new opcodes as appropriate.
1537 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1539 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1540 sequential so the assembler never parallelizes it with
1543 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1545 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1546 a data/address register that appears in register field 0
1547 and register field 1.
1548 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1550 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1552 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1553 standard disassembly.
1555 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1556 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1557 Recategorize PALcode instructions.
1559 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1561 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1563 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1565 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1566 there are no operand types.
1568 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1570 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1572 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1574 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1576 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1578 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1580 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1581 and sst.w instructions.
1583 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1586 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1588 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1591 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1593 * ppc-opc.c (PPCPWR2): Define.
1594 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1597 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1599 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1600 field for movhu instruction.
1602 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1603 cast value to "long" not "signed long" to keep hpux10
1606 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1608 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1611 * mn10300-opc.c (FMT*): Remove definitions.
1613 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1614 for shift-by-register opcodes.
1616 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1617 into [AD][MN][01] for encoding the position of the register
1620 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1622 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1623 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1625 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1627 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1628 Fix various typos. Add "PAREN" operand.
1629 (MEM, MEM2): Define.
1630 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1631 operands. Fix several typos.
1633 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1636 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1638 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1639 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1641 (mn10300_opcodes): Break opcode format out into its own field.
1642 Update many operand fields to deal with signed vs unsigned
1643 issues. Fix one or two typos in the "mov" instruction
1644 opcode, mask and/or operand fields.
1646 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1648 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1649 m68851 wasn't reset.
1651 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1653 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1654 all opcodes. Very rough cut at operands for all opcodes.
1656 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1659 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1661 * mn10200-opc.c, mn10300-opc.c: New files.
1662 * mn10200-dis.c, mn10300-dis.c: New files.
1663 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1664 * disassemble.c: Break mn10x00 support into 10200 and 10300
1666 * configure.in: Likewise.
1667 * configure: Rebuilt.
1669 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1671 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1673 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1675 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1677 * disassemble (ARCH_mn10x00): Define.
1678 (disassembler): Handle bfd_arch_mn10x00.
1679 * configure.in: Recognize bfd_mn10x00_arch.
1680 * configure: Rebuilt.
1682 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1684 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1685 accordingly. Don't declare functions using op_rtn.
1687 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1689 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1690 params to be more standard.
1691 * (disassemble): Print absolute addresses and symbolic names for
1692 branch and jump targets.
1693 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1695 * (v850_opcodes): Add breakpoint insn.
1697 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1699 * m68k-opc.c: Move the fmovemx data register cases before the
1700 other cases, so that they get recognized before the data register
1701 does gets treated as a degenerate register list.
1703 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1705 * mips-opc.c: Add a case for "div" and "divu" with two registers
1706 and a destination of $0.
1708 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1710 * mips-dis.c (print_insn_arg): Add prototype.
1711 (_print_insn_mips): Ditto.
1713 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1715 * mips-dis.c (print_insn_arg): Print condition code registers as
1718 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1720 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1722 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1724 * v850-dis.c (disassemble): Make static. Provide prototype.
1726 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1728 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1731 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1733 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1734 ']' characters into the output stream.
1735 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1736 Add "memop" field to all opcodes (for the disassembler).
1737 Reorder opcodes so that "nop" comes before "mov" and "jr"
1738 comes before "jarl".
1740 * v850-dis.c (print_insn_v850): Fix typo in last change.
1742 * v850-dis.c (print_insn_v850): Properly handle disassembling
1743 a two byte insn at the end of a memory region when the memory
1744 region's size is only two byte aligned.
1746 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1748 * v850-dis.c (v850_reg_names): Define.
1749 (v850_sreg_names, v850_cc_names): Likewise.
1750 (disassemble): Very rough cut at printing operands (unformatted).
1752 * v850-opc.c (BOP_MASK): Fix.
1753 (v850_opcodes): Fix mask for jarl and jr.
1755 * v850-dis.c: New file. Skeleton for disassembler support.
1756 * Makefile.in Remove v850 references, they're not needed here.
1757 * configure.in: Add v850-dis.o when building v850 toolchains.
1758 * configure: Rebuilt.
1759 * disassemble.c (disassembler): Call v850 disassembler.
1761 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1762 (insert_d8_6, extract_d8_6): New functions.
1763 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1764 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1766 (IF4A, IF4B): Use "D7" instead of "D7S".
1767 (IF4C, IF4D): Use "D8_7" instead of "D8".
1768 (IF4E, IF4F): New. Use "D8_6".
1769 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1770 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1772 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1773 (v850_operands): Change D16 to D16_15, use special insert/extract
1774 routines. New new D16 that uses the generic insert/extract code.
1775 (IF7A, IF7B): Use D16_15.
1776 (IF7C, IF7D): New. Use D16.
1777 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1779 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1780 message. Issue an error if the branch offset is odd.
1782 * v850-opc.c: Add notes about needing special insert/extract
1783 for all the load/store insns, except "ld.b" and "st.b".
1785 * v850-opc.c (insert_d22, extract_d22): New functions.
1786 (v850_operands): Use insert_d22 and extract_d22 for
1788 (insert_d9): Fix range check.
1790 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1792 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1793 and set bits field to D9 and D22 operands.
1795 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1797 * v850-opc.c (v850_operands): Define SR2 operand.
1798 (v850_opcodes): "ldsr" uses R1,SR2.
1800 * v850-opc.c (v850_opcodes): Fix opcode specs for
1801 sld.w, sst.b, sst.h, sst.w, and nop.
1803 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1805 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1806 end of the opcode table.
1808 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1810 * d10v-opc.c (pre_defined_registers): Added register pairs,
1811 "r0-r1", "r2-r3", etc.
1813 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1815 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1816 Create I16U for an unsigned 16bit mmediate operand.
1817 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1819 * v850-opc.c (v850_operands): Define EP operand.
1820 (IF4A, IF4B, IF4C, IF4D): Use EP.
1822 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1823 with immediate operand, "movhi". Tweak "ldsr".
1825 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1826 correct. Get sld.[bhw] and sst.[bhw] closer.
1828 * v850-opc.c (v850_operands): "not" is a two byte insn
1830 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1832 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1834 * v850-opc.c (two): Get order of words correct.
1836 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1838 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1839 register source and destination operands.
1840 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1842 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1843 same thinko in "trap" opcode.
1845 * v850-opc.c (v850_opcodes): Add initializer for size field
1848 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1849 Add D8 for 8-bit unsigned field in short load/store insns.
1850 (IF4A, IF4D): These both need two registers.
1851 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1852 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1853 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1854 for "ldsr" and "stsr".
1855 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1858 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1859 short store word (sst.w).
1861 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1863 * v850-opc.c (v850_operands): Added insert and extract fields,
1864 pointers to functions that handle unusual operand encodings.
1866 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1868 * v850-opc.c (v850_opcodes): Enable "trap".
1870 * v850-opc.c (v850_opcodes): Fix order of displacement
1871 and register for "set1", "clr1", "not1", and "tst1".
1873 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1875 * v850-opc.c (v850_operands): Add "B3" support.
1876 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1879 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1881 * v850-opc.c: Close unterminated comment.
1883 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1885 * v850-opc.c (v850_operands): Add flags field.
1886 (v850_opcodes): add move opcodes.
1888 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1890 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1891 * configure: (bfd_v850v_arch) Add new case.
1892 * configure.in: (bfd_v850_arch) Add new case.
1893 * v850-opc.c: New file.
1895 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1897 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1899 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1901 * d10v-opc.c: Add additional information to the opcode
1902 table to help determinine which instructions can be done
1905 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1907 * mpw-make.sed: Update editing of include pathnames to be
1910 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1912 * arm-opc.h: Added "bx" instruction definition.
1914 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1916 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1918 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1920 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1922 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1924 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1926 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1928 * makefile.vms: Update for alpha-opc changes.
1930 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1932 * i386-dis.c (print_insn_i386): Actually return the correct value.
1933 (ONE, OP_ONE): #ifdef out; not used.
1935 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1937 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1938 Changed subi operand type to treat 0 as 16.
1940 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1942 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1945 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1947 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1948 memory transfer instructions. Add new format string entries %h and %s.
1949 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1952 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1954 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1955 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1957 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1959 * alpha-dis.c (print_insn_alpha_osf): Remove.
1960 (print_insn_alpha_vms): Remove.
1961 (print_insn_alpha): Make globally visible. Chose the register
1962 names based on info->flavour.
1963 * disassemble.c: Always return print_insn_alpha for the alpha.
1965 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1967 * d10v-dis.c (dis_long): Handle unknown opcodes.
1969 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1971 * d10v-opc.c: Changes to support signed and unsigned numbers.
1972 All instructions with the same name that have long and short forms
1973 now end in ".l" or ".s". Divs added.
1974 * d10v-dis.c: Changes to support signed and unsigned numbers.
1976 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1978 * d10v-dis.c: Change all functions to use info->print_address_func.
1980 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1982 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1983 move ccr/sr insns more strict so that the disassembler only
1984 selects them when the addressing mode is data register.
1986 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1987 * d10v-opc.c (pre_defined_registers): Declare.
1988 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1989 to pick a better name for the registers.
1991 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1993 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1994 operands for fexpand and fpmerge. From Christian Kuehnke
1995 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1997 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1999 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2000 print routine. Take new regnames and cpumask arguments.
2001 Kill the environment variable nonsense.
2002 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2003 (print_insn_alpha_vms): New function. Do VMS style regnames.
2004 * disassemble.c (disassembler): Test bfd flavour to pick
2005 between OSF and VMS routines. Default to OSF.
2007 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2009 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2010 * configure: Rebuild.
2011 * Makefile.in (install): Use @INSTALL_SHLIB@.
2013 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2015 * configure: (bfd_d10v_arch) Add new case.
2016 * configure.in: (bfd_d10v_arch) Add new case.
2017 * d10v-dis.c: New file.
2018 * d10v-opc.c: New file.
2019 * disassemble.c (disassembler) Add entry for d10v.
2021 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2023 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2024 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2026 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2028 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2029 distinguish between variants of the instruction set.
2030 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2031 distinguish between variants of the instruction set.
2033 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2035 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2036 the 8086 instruction set.
2037 * i386-dis.c: General cleanups. Make most things static. Add
2038 prototypes. Get rid of static variables aflags and dflags. Pass
2039 them as args (to almost everything).
2041 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2043 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2045 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2047 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2048 if the next arg is marked with SRC_IN_DST. Gross.
2050 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2051 we're looking for and find EXR.
2053 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2054 if we're looking for KBIT and we don't find it.
2056 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2059 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2060 3bit immediate operands.
2062 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2064 * Released binutils 2.7.
2066 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2067 <kkaempf@progis.ac-net.de>.
2069 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2071 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2073 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2075 * sparc-dis.c (print_insn_sparclite): New routine to print
2076 sparclite instructions.
2078 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2080 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2082 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2084 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2085 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2086 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2088 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2090 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2091 Use autoconf-set values.
2092 (docdir, oldincludedir): Removed.
2093 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2095 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2097 * alpha-opc.c: New file.
2098 * alpha-opc.h: Remove.
2099 * alpha-dis.c: Complete rewrite to use new opcode table.
2100 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2101 * configure: Rebuild with autoconf 2.10.
2102 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2103 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2105 (alpha-opc.o): New target.
2107 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2109 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2110 Set imm_added_to_rs1 even if the source and destination register
2113 * sparc-opc.c: Add some two operand forms of the wr instruction.
2115 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2117 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2120 * disassemble.c (disassembler): Handle H8/S.
2121 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2123 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2125 * sparc-opc.c: Add beq/teq as aliases for be/te.
2127 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2128 <sergei@msil.sps.mot.com>.
2130 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2132 * makefile.vms: New file.
2134 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2136 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2138 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2141 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2143 * i386-dis.c (OP_OFF): Call append_prefix.
2145 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2147 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2148 unsigned long to silence a warning from the Solaris PowerPC
2151 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2153 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2155 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2157 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2159 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2160 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2161 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2162 cpush, cpusha, cpull sparclet insns.
2164 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2166 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2168 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2170 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2171 Set F_FLOAT on other floating point instructions.
2173 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2175 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2177 (powerpc_opcodes): Add 860/821 specific SPRs.
2179 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2181 * configure.in: Permit --enable-shared to specify a list of
2182 directories. Set and substitute BFD_PICLIST.
2183 * configure: Rebuild.
2184 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2185 uses. Set to @BFD_PICLIST@.
2187 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2189 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2190 not "abs", which may be needed for the absolute in something
2191 like btst #0,@10:8. Print L_3 immediates separately from other
2192 immediates. Change ABSMOV reference to ABS8MEM.
2194 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2196 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2197 (current_arch_mask): New static global.
2198 (compute_arch_mask): New static function.
2199 (print_insn_sparc): Delete sparc_v9_p. New static local
2200 current_mach. Resort opcode table if current_mach changes.
2201 Generalize "insn not supported" test.
2202 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2203 Delete test for v9/!v9.
2204 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2206 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2207 (brfcx): Renamed to FBRX.
2208 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2209 coprocessor mnemonics are not supported on the sparclet).
2210 (condf): Renamed to CONDF.
2211 (SLCBCC2): Delete F_ALIAS flag.
2213 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2215 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2216 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2218 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2220 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2221 that the shared library version number is set correctly.
2223 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2225 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2226 Miles Bader <miles@gnu.ai.mit.edu>.
2227 * configure: Rebuild.
2229 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2231 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2234 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2236 * configure: Rebuild with autoconf 2.8.
2238 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2240 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2241 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2243 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2245 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2246 since they appear as targets in Makefile.in.
2247 * configure: Rebuild.
2249 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2251 * mpw-make.sed: Edit out shared library support bits.
2253 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2255 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2256 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2257 (sparc_opcodes): Add sparclet insns.
2258 (sparclet_cpreg_table): New static local.
2259 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2260 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2262 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2264 * i386-dis.c (index16): New static variable.
2265 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2267 (OP_indirE): Return result of OP_E.
2268 (OP_E): Check for 16 bit addressing mode, and disassemble
2269 correctly. Optimised 32 bit case a little. Don't print
2270 "(base,index,scale)" when sib specifies only an offset.
2272 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2274 * configure.in: Set and substitute SHLIB_DEP.
2275 * configure: Rebuild.
2276 * Makefile.in (SHLIB_DEP): New variable.
2277 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2278 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2279 COMMON_SHLIB, add them to piclist with appropriate modifications.
2280 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2281 here: just use piclist.
2283 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2285 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2286 (print_insn_sparc): Rewrite v9/not-v9 tests.
2287 (compare_opcodes): Likewise.
2288 * sparc-opc.c (MASK_<ARCH>): Define.
2289 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2290 (sparclet,v6notv9): Define.
2291 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2292 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2294 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2296 * configure.in: Call AC_PROG_CC before configure.host.
2297 * configure: Rebuild.
2299 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2301 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2303 * i386-dis.c (onebyte_has_modrm): New static array.
2304 (twobyte_has_modrm): New static array.
2305 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2307 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2309 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2312 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2314 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2317 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2319 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2320 m68010up, not just m68020up | cpu32.
2322 * Makefile.in (SONAME): New variable.
2323 ($(SHLINK)): Make a link to the transformed name, as well.
2324 (stamp-tshlink): New target.
2325 (install): Skip stamp-tshlink during install.
2327 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2329 * configure.in: Call AC_ARG_PROGRAM.
2330 * configure: Rebuild.
2331 * Makefile.in (program_transform_name): New variable.
2332 (install): Transform library name before installing it.
2334 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2336 * i960-dis.c (mem): Add HX dcinva instruction.
2338 Support for building as a shared library, based on patches from
2339 Alan Modra <alan@spri.levels.unisa.edu.au>:
2340 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2341 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2342 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2343 * configure: Rebuild.
2344 * Makefile.in (ALLLIBS): New variable.
2345 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2346 (COMMON_SHLIB, SHLINK): New variables.
2347 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2348 (STAGESTUFF): Remove variable.
2349 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2350 (stamp-piclist, piclist): New targets.
2351 ($(SHLIB), $(SHLINK)): New targets.
2352 ($(OFILES)): Depend upon stamp-picdir.
2353 (disassemble.o): Build twice if PICFLAG is set.
2354 (MOSTLYCLEAN): Add pic/*.o.
2355 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2356 (distclean): Remove pic and stamp-picdir.
2357 (install): Install shared libraries.
2358 (stamp-picdir): New target.
2360 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2362 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2363 Print unknown instruction as "unknown", rather than in hex.
2365 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2367 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2369 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2371 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2373 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2375 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2376 when necessary. From Ulrich Drepper
2377 <drepper@myware.rz.uni-karlsruhe.de>.
2379 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2381 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2382 sparc_num_opcodes. Update architecture enum values.
2383 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2384 (sparc_opcode_lookup_arch): New function.
2385 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2386 (sparc_opcodes): Add v9a shutdown insn.
2388 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2390 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2391 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2393 (print_insn_sparc64): Deleted.
2394 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2397 * sparc-opc.c (architecture_pname): Add v9a.
2399 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2401 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2402 incorrectly defined as 0x16 when it should be 0x15.
2403 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2404 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2405 excb (exception barrier) which is defined in the Alpha
2406 Architecture Handbook version 2.
2407 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2408 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2409 disassembled as or, for example.
2411 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2413 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2414 (_print_insn_mips): Change i from int to unsigned int.
2416 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2418 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2419 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2421 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2423 * i386-dis.c: Added Pentium Pro instructions.
2425 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2427 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2430 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2432 * sh-opc.h (sh_nibble_type): Added REG_B.
2433 (sh_arg_type): Added A_REG_B.
2434 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2436 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2438 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2440 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2442 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2444 * Makefile.in (distclean): Remove stamp-h. From Ronald
2445 F. Guilmette <rfg@monkeys.com>.
2447 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2449 From David Mosberger-Tang <davidm@azstarnet.com>:
2450 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2453 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2455 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2456 (sh_table): Added many SH3 opcodes.
2457 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2459 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2461 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2462 (subco,subco.): Mark this PPC, not PPCCOM.
2464 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2466 * configure: Rebuild with autoconf 2.7.
2468 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2470 * configure: Rebuild with autoconf 2.6.
2472 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2474 * configure.in: Sort list of architectures. Accept but do nothing
2475 for alliant, convex, pyramid, romp, and tahoe.
2477 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2479 * a29k-dis.c (print_special): Change num to unsigned int.
2481 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2483 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2486 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2488 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2489 * configure: Rebuilt.
2491 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2493 * configure.in: Add case for bfd_i860_arch.
2494 * configure: Rebuild.
2496 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2498 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2499 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2500 (NEXTDOUBLE): Likewise.
2501 (print_insn_m68k): Don't match fmoveml if there is more than one
2502 register in the list.
2503 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2505 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2507 * m68k-opc.c: Use #W rather than #w.
2508 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2510 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2512 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2513 and likewise for all the dbxx opcodes.
2515 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2517 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2519 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2521 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2522 the VR4100 specific instructions to the mips_opcodes structure.
2524 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2526 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2527 ugly Metrowerks bug in CW6, is fixed in CW7.
2529 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2531 * ppc-opc.c (whole file): Add flags for common/any support.
2533 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2535 * Makefile.in (BISON): Remove macro.
2536 (FLAGS_TO_PASS): Remove BISON.
2538 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2540 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2542 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2543 instructions that take no args by looking at the match mask.
2544 (print_insn_arg): Always print "%" before register names.
2545 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2546 [case '_']: Don't print "@#" before address.
2547 [case 'J']: Use "%s" as format string, not register name.
2548 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2550 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2552 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2555 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2557 From David Mosberger-Tang <davidm@azstarnet.com>
2559 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2560 (alpha_insn_set): added definitions for VAX floating point
2561 instructions (Unix compilers don't generate these, but handcoded
2562 assembly might still use them).
2564 * alpha-dis.c (print_insn_alpha): added support for disassembling
2565 the miscellaneous instructions in the Alpha instruction set.
2567 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2569 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2570 no longer create sysdep.h, sed ppc-opc.c to work around a
2571 serious Metrowerks C bug.
2572 * mpw-make.in: Remove.
2573 * mpw-make.sed: New file, used by mpw-configure to edit
2574 Makefile.in into an MPW makefile.
2576 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2578 * Makefile.in (maintainer-clean): New synonym for realclean.
2580 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2582 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2583 which use '0', '1', and '2' instead. Specify the proper size for
2584 a pmove immediate operand. Correct the pmovefd patterns to be
2585 moves to a register, not from a register.
2586 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2588 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2590 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2591 %psr, %wim, %tbr as F_NOTV9.
2593 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2595 * Makefile.in (Makefile): Just rebuild Makefile when running
2597 (config.h, stamp-h): New targets.
2598 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2599 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2600 rebuilding config.h.
2601 * configure: Rebuild.
2603 * mips-opc.c: Change unaligned loads and stores with "t,A"
2604 operands to use "t,A(b)".
2606 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2608 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2610 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2612 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2613 until 3 instead of until 2.
2615 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2617 * Makefile.in (ALL_CFLAGS): Define.
2618 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2619 (MOSTLYCLEAN): Add config.log.
2620 (distclean): Don't remove config.log.
2621 * configure.in: Substitute HDEFINES.
2622 * configure: Rebuild.
2624 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2626 * sh-opc.h (sh_arg_type): Add F_FR0.
2627 (sh_table, case fmac): Add F_FR0 as first argument.
2629 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2631 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2633 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2635 * sparc-dis.c: Remove all references to NO_V9.
2637 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2639 * aclocal.m4: Just include ../bfd/aclocal.m4.
2640 * configure: Rebuild.
2642 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2644 * sparc-dis.c (X_DISP19): Define.
2645 (print_insn, case 'G'): Use it.
2646 (print_insn, case 'L'): Sign extend displacement.
2648 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2650 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2651 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2652 host_makefile_frag or frags.
2653 * aclocal.m4: New file.
2654 * configure: Rebuild.
2655 * Makefile.in (INSTALL): Set to @INSTALL@.
2656 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2657 (INSTALL_DATA): Set to @INSTALL_DATA@.
2659 (AR_FLAGS): Set to rc rather than qc.
2660 (CC): Define as @CC@.
2661 (CFLAGS): Set to @CFLAGS@.
2662 (@host_makefile_frag@): Remove.
2663 (config.status): Remove dependency upon @frags@.
2665 * configure.in: ../bfd/config.bfd now just sets shell variables.
2666 Use them rather than looking through target Makefile fragments.
2667 * configure: Rebuild.
2669 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2671 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2673 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2675 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2676 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2679 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2680 (lookup_{name,value}): New functions.
2681 (prefetch_table): New static local.
2682 (sparc_{encode,decode}_prefetch): New functions.
2683 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2685 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2687 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2690 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2692 * sh-dis.c: Correct comment on first line of file.
2694 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2696 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2698 * sparc-opc.c (asi, membar): New static locals.
2699 (sparc_{encode,decode}_{asi,membar}): New functions.
2700 (sparc_opcodes, membar insn): Fix.
2701 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2702 Support decoding of membar masks.
2705 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2707 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2709 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2711 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2712 and likewise for the other branches. Add bhs as an alias for bcc,
2713 and likewise for the size variants. Add dbhs as an alias for
2716 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2718 * sh-opc.h (FP sts instructions): Update to match reality.
2720 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2722 * m68k-dis.c: (fpcr_names): Add % before all register names.
2723 (reg_names): Likewise.
2724 (print_insn_arg): Don't explicitly print % before register names.
2725 Add % before register names in static array names. In case 'r',
2726 print data registers as `@(Dn)', not `Dn@'. When printing a
2727 memory address, don't print @# before it.
2728 (print_indexed): Change base_disp and outer_disp from int to
2729 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2730 syntax. Sign extend 8 byte displacement correctly.
2731 (print_base): Print using MIT syntax. Print zpc when appropriate.
2732 Change parameter disp from int to bfd_vma.
2734 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2737 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2739 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2740 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2741 * sh-opc.h (sh_arg_type): Add new operand types.
2742 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2744 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2746 * Makefile.in (distclean): Remove generated file config.h.
2748 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2750 * Makefile.in (distclean): Remove generated file config.h.
2752 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2754 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2756 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2758 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2759 rather than numopcodes. Use m68k_opcodes rather than removed
2760 opcode function. Don't check F_ALIAS.
2761 (print_insn_arg): Change first parameter to be const char *.
2762 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2763 (m68k-opc.o): New target.
2764 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2765 * configure: Rebuild.
2767 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2769 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2770 (opcode_bits, opcode_hash_table): New variables.
2771 (opcodes_initialized): Renamed from opcodes_sorted.
2772 (build_hash_table): New function.
2773 (is_delayed_branch): Use hash table.
2774 (print_insn): Renamed from print_insn_sparc, made static.
2775 Build and use hash table. If !sparc64, ignore sparc64 insns,
2776 and vice-versa if sparc64.
2777 (print_insn_sparc, print_insn_sparc64): New functions.
2778 (compare_opcodes): Move sparc64 opcodes to end.
2779 Print commutative insns with constant second.
2780 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2782 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2784 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2785 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2786 avoids printing a delay slot in a delay slot.
2787 * sh-opc.h (sh_table): Fully bracket last entry.
2789 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2791 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2793 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2795 * configure.in: Get host_makefile_frag from ${srcdir}.
2797 * configure.in: Autoconfiscated. Check for string[s].h. Create
2798 config.h from config.in. Don't set up sysdep.h link.
2799 * sysdep.h: New file.
2800 * configure, config.in: New files, generated from configure.in.
2801 * Makefile.in: Updated to be processed autoconf-style.
2802 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2803 (Makefile): Depend on config.status.
2804 (config.status): New rule.
2805 * configure.bat: Update Makefile substitutions.
2807 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2809 * mips-opc.c (L1): Define.
2810 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2811 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2814 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2816 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2817 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2818 have multiple add units but only a single logical unit.
2820 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2821 shifted by 18, without any insertion or extraction function.
2822 (insert_cr, extract_cr): Remove.
2824 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2826 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2829 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2831 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2832 * sh-opc.h: Add copyright.
2834 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2836 * Makefile.in (crunch-m68k): Delete extra target accidentally
2837 checked in a while ago.
2839 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2841 * sh-opc.h (sh_table): Add SH3 support.
2843 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2845 * sh-opc.h: Added bsrf and braf.
2847 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2849 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2850 bogus [ls]fm{ea,fd} patterns.
2852 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2853 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2854 initialize it from memory. Make function static.
2855 (print_insn_{big,little}_arm): New functions.
2856 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2857 the correct endianness.
2859 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2861 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2864 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2866 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2867 17th, so that it builds again using GCC as the compiler.
2869 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2871 * mips-dis.c (print_insn_little_mips): Cast return value from
2872 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2873 expects an unsigned long, and that might be fewer words of
2874 argument storage (e.g., if bfd_vma is long long on a 32-bit
2876 (print_insn_big_mips): Likewise with bfd_getb32 value.
2877 (_print_insn_mips): Now static.
2879 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2881 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2882 gcc memory hog problem with initializer is fixed.
2884 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2886 Merge in support for Mac MPW as a host.
2887 (Old change descriptions retained for informational value.)
2889 * mpw-config.in (archname): Compute from the config.
2890 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2892 * mpw-config.in (target_arch): Compute from canonical target.
2893 (m68k, mips, powerpc, sparc): Add architectures.
2894 * mpw-make.in (disassemble.c.o): Add.
2895 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2897 * mpw-config.in (BFD_MACHINES): Set to a default value.
2898 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2900 * mpw-make.in (CSEARCH): Add extra-include to search path.
2902 * mpw-config.in (varargs.h): Don't create.
2903 (sysdep.h): Create using forward-include.
2904 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2906 * mpw-config.in: New file, MPW version of configure.in.
2907 * mpw-make.in: New file, MPW version of Makefile.in.
2909 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2911 * alpha-dis.c (print_insn_alpha): Put empty statement after
2914 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2916 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2917 (low_sign_extend): Likewise.
2918 (get_field): Delete unused function.
2919 (set_field, deposit_14, deposit_21): Likewise.
2921 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2923 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2926 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2928 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2930 * alpha-opc.h (OSF_ASMCODE): define
2931 print pal-code names as defined in App C of the
2932 Alpha Architecture Reference Manual
2934 * alpha-dis.c: cleaned up output
2935 print stylized code forms as defined in App A.4.3 of the
2936 Alpha Architecture Reference Manual
2938 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2940 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2942 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2945 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2947 * m68k-dis.c (opcode): New function. Returns address of opcode
2948 table entry given index, even if the opcode table was split to
2949 work around gcc bugs.
2950 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2952 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2953 (reg_names): Now const.
2954 (print_insn_arg): Arrays cacheFieldName and names now const.
2955 (print_indexed): Array scales now const.
2957 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2959 * ppc-opc.c: Sort recently added instructions by minor opcode
2960 number within major opcode number.
2962 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2964 * hppa-dis.c: Include libhppa.h.
2966 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2968 * mips-opc.c: Change dli to use M_DLI, and add dla.
2970 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2972 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2974 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2976 * mips-opc.c: Add r4650 mul instruction.
2978 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2980 * mips-opc.c: Add uld and usd macros for unaligned double load and
2983 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2985 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2986 mfdcr, mtdcr, icbt, iccci.
2988 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2990 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2991 signed char fields to shorts, more portable.
2993 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2995 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2996 char fields as signed chars, since they may have negative values.
2998 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3000 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3001 (mycroft@netbsd.org).
3003 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3005 From "Logg, Ed" <elogg@ea.com>:
3006 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3007 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3010 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3012 * ppc-opc.c: Changes based on patch from David Edelsohn
3013 <edelsohn@mhpcc.edu>.
3014 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3017 (insert_tbr): New static function.
3018 (extract_tbr): New static function.
3019 (XFXFXM_MASK, XFXM): Define.
3020 (XSPRBAT_MASK, XSPRG_MASK): Define.
3021 (powerpc_opcodes): Add instructions to access special registers by
3022 name. Add mtcr and mftbu.
3024 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3026 * mips-opc.c (P3): Define.
3027 (mips_opcodes): Add mad and madu.
3029 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3031 * configure.in: Add W65 support.
3032 * disassemble.c: Likewise.
3033 * w65-opc.h, w65-dis.c: New files.
3035 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3037 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3040 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3042 * mips-opc.c: Add dli as a synonym for li.
3044 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3046 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3047 print something for reserved opcode values, even if it won't
3050 * mips-dis.c (_print_insn_mips): When initializing, shift right
3051 and mask, to avoid sign extension problems on the Alpha.
3053 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3056 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3058 * sh-opc.h (mov.l gbr): Get direction right.
3059 * sh-dis.c (print_insn_shx): New function.
3060 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3061 print opcodes with right byte order.
3063 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3065 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3066 to avoid conflicts with getopt.
3068 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3070 * hppa-dis.c (print_insn_hppa): Read the instruction using
3071 bfd_getb32, so that it works on a little endian or 64 bit host.
3072 Remove unused local variable op.
3074 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3076 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3077 addu does not work correctly if -mips3.
3079 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3081 * a29k-dis.c (print_special): Add special register names defined
3082 on 29030, 29040 and 29050.
3083 (print_insn): Handle new operand type 'I'.
3085 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3087 * Makefile.in (INSTALL): Use top level install.sh script.
3089 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3091 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3092 that it works on a little endian host.
3094 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3096 * configure.in: Use ${config_shell} when running config.bfd.
3098 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3100 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3102 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3104 * a29k-dis.c (print_insn): Print the opcode.
3106 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3108 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3110 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3112 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3114 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3116 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3117 which store a value into memory.
3119 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3121 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3122 * arm-dis.c, arm-opc.h: New files.
3124 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3126 * Makefile.in (ns32k-dis.o): Add dependency.
3127 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3128 string, not as array of chars.
3130 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3132 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3134 * sparc-opc.c: Added sparclite extended FP operations, and
3135 versions of v9 impdep* instructions permitting specification of
3138 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3140 * i960-dis.c (reg_names): Now const.
3141 (struct sparse_tabent): New type, copied from array type in mem
3143 (ctrl): Local static array ctrl_tab now const.
3144 (cobr): Local static array cobr_tab now const.
3145 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3146 static variable mem_tab no longer explicitly initialized. Changed
3147 mem_init to const array of struct sparse_tabent.
3148 (reg): Local static variable reg_tab no longer explicitly
3149 initialized. Changed reg_init to const array of struct
3151 (ea): Local static array scale_tab now const.
3153 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3156 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3158 * configure.bat: the disassember needs to be enabled for
3159 "objdump -d" to work in djgpp.
3161 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3163 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3164 (invalid_float): Enabled general version, doesn't require running
3165 on ns32k host. Changed to take char* argument, and test for
3166 explicitly specified sizes, instead of using sizeof() on host CPU
3168 (INVALID_FLOAT): Cast first argument.
3169 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3170 list_P032, list_M032): Now const.
3171 (optlist, list_search): Made appropriate arguments now point to
3173 (print_insn_arg): Changed static array of one-character-string
3174 pointers into a static const array of characters; fixed sprintf
3175 statement accordingly.
3177 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3179 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3180 from distribution. A ns32k-dis.c from a previous distribution has
3181 been brought up to date and supports the new interface.
3183 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3185 * configure.in: add bfd_ns32k_arch target support.
3187 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3188 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3190 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3192 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3195 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3197 * h8300-dis.c, mips-dis.c: Don't use true and false.
3199 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3201 * configure.in: Change --with-targets to --enable-targets.
3203 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3205 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3206 opcodes to the first instruction with that opcode, to speed
3207 disassembly of large files. From ralphc@pyramid.com (Ralph
3210 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3214 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3216 * configure.bat: update to latest makefile.in
3218 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3220 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3221 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3222 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3223 slot insn is in a delay slot.
3224 * z8k-opc.h: (resflg): Fix patterns.
3225 * h8500-opc.h Fix CR insn patterns.
3227 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3229 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3230 "cmpl" before POWER versions, so that gas -many uses them.
3232 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3234 * disassemble.c: New file.
3235 * Makefile.in (OFILES): Add disassemble.o.
3236 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3237 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3238 binutils/configure.in.
3240 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3241 opcode being examined.
3243 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3245 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3246 (insert_ral, insert_ram, insert_ras): New functions.
3247 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3248 RAS for store with update.
3250 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3252 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3253 (edelsohn@npac.syr.edu).
3255 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3257 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3260 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3262 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3264 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3266 * ppc-opc.c (powerpc_operands): The signedp field has been
3267 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3268 instead. Add new operand SISIGNOPT.
3269 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3270 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3271 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3274 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3276 * i386-dis.c (struct private): Renamed to dis_private. `private'
3277 is a reserved word for dynix cc.
3279 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3281 * configure.in: Change error message to refer to bfd/config.bfd
3282 rather than bfd/configure.in.
3284 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3286 * ppc-opc.c: Define POWER2 as short alias flag.
3287 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3290 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3292 * i960-dis.c (print_insn_i960): Don't read a second word for
3293 opcodes 0, 1, 2 and 3.
3295 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3299 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * m68881-ext.c: Removed; no longer used.
3302 * Makefile.in: Changed accordingly.
3304 * m68k-dis.c (ext_format_68881): Don't declare.
3305 (print_insn_m68k): If an instruction uses place 'i', it uses at
3306 least four fixed bytes.
3307 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3308 extended float, convert to double using floatformat_to_double, not
3309 ieee_extended_to_double, and fetch the data before converting it.
3311 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3313 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3314 davidj@ICSI.Berkeley.EDU (David Johnson).
3316 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3318 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3319 PowerPC uses bdnz[l][a].
3321 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3323 * dis-buf.c, i386-dis.c: Include sysdep.h.
3325 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3327 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3329 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3330 by Motorola PowerPC 601 with PPC_OPCODE_601.
3331 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3332 Disassemble Motorola PowerPC 601 instructions as well as normal
3333 PowerPC instructions.
3335 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3337 * i960-dis.c (reg, mem): Just use a static array instead of
3340 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3342 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3343 condition name index if this is for a negated condition.
3345 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3346 Floating point format for 'H' operand is backwards from normal
3347 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3348 operands (fmpyadd and fmpysub), handle bizarre register
3349 translation correctly for single precision format.
3351 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3352 or 'I' operands if the next format specifier is 'M' (fcmp
3353 condition completer).
3355 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3357 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3358 single number giving a bitmask for the MB and ME fields of an M
3359 form instruction. Change NB to accept 32, and turn it into 0;
3360 also turn 0 into 32 when disassembling. Seperated SH from NB.
3361 (insert_mbe, extract_mbe): New functions.
3362 (insert_nb, extract_nb): New functions.
3363 (SC_MASK): Mask out SA and LK bits.
3364 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3365 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3366 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3367 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3368 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3369 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3370 (powerpc_macros): Define table of macro definitions.
3371 (powerpc_num_macros): Define.
3373 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3374 if PPC_OPERAND_NEXT is set.
3376 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3378 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3379 char. Retrieve contents using bfd_getl32 instead of shifting.
3381 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3383 * ppc-opc.c: New file. Opcode table for PowerPC, including
3384 opcodes for POWER (RS/6000).
3385 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3386 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3387 (CFILES): Add ppc-dis.c.
3388 (ppc-dis.o, ppc-opc.o): New targets.
3389 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3391 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3393 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3394 No space before 'u', 'f', or 'N'.
3396 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3398 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3399 farther than we should.
3401 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3403 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3405 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3407 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3409 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3410 needs it, to prevent reading past the end of a section.
3412 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3414 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3415 Removed t,A case for la; always use t,A(b) case.
3417 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3419 From Ted Lemen <mellon@pepper.ncd.com>
3420 * mips-dis.c (print_insn_arg): Handle 'k'.
3421 * mips-opc.c: Make cache use k, not t.
3423 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3425 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3426 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3427 FLOAT_FORMAT_CODE to put out floating point register names.
3429 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3431 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3433 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3435 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3437 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3439 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3440 larger than 32. Moved dsxx32 variants first for disassembler.
3442 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3444 * z8kgen.c, z8k-opc.h: Add full lda information.
3446 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3448 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3449 movb instructions. Any necessary space will be emitted by
3450 the code to handle nullification completers.
3452 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3454 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3456 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3458 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3459 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3461 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3463 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3465 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3467 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3468 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3470 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3472 * m88k-dis.c (m88kdis): comment change. Remove space after
3474 (printop): handle new arg types DEC and XREG for m88110.
3476 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3478 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3479 type for absolute branch addresses. Delete special
3480 "ble" and "be" code in 'W' operand code.
3482 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3484 * mips-opc.c: Set hazard information correctly for branch
3485 likely instructions.
3487 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3489 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3490 info->fprintf_func for printing and info->print_address_func for
3493 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3495 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3497 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3499 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3500 Corrected second case of "b" for disassembler.
3502 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3504 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3505 to BFD swapping routines to correspond to BFD name changes.
3507 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3509 * mips-opc.c: Change div machine instruction to be z,s,t rather
3510 than s,t. Change div macro to be d,v,t rather than d,s,t.
3511 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3512 rem and remu which generates only the corresponding div
3513 instruction. This is for compatibility with the MIPS assembler,
3514 which only generates the simple machine instruction when an
3515 explicit destination of $0 is used.
3516 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3518 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3520 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3521 WR_31 hazard for bal, bgezal, bltzal.
3523 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3525 * hppa-dis.c (print_insn_hppa): Use print function
3526 from within the disassemble_info, not fprintf_filtered.
3528 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3530 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3531 Law, law@cs.utah.edu.)
3533 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3535 * mips-opc.c ("absu"): Removed.
3538 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3540 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3541 Changed hazard information to distinguish between memory load
3542 delays and coprocessor load delays.
3544 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3546 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3548 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3550 * configure.in: Don't pass cpu to config.bfd.
3552 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3554 * m88k-dis.c (m88kdis): Make class unsigned.
3556 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3558 * alpha-dis.c (print_insn_alpha): One branch format case was
3559 missing the instruction name.
3561 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3563 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3564 Add the arch-specific auxiliary files.
3565 (OFILES): Remove the arch-specific auxiliary files
3566 and use BFD_MACHINES instead of DIS_LIBS.
3567 * configure.in: Set BFD_MACHINES based on --with-targets option.
3569 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3571 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3574 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3576 * sparc-opc.c: Change CONST to const to deal with gcc
3577 -Dconst=__const -traditional.
3579 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3581 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3582 coprocessor instructions out of #if 0, and made them use new
3585 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3587 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3589 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3591 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3592 instruction, for use by the disassembler.
3594 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3595 hand-coded sign extensions that depended on 32-bit host ints.
3596 FIXME, we still depend on big-endian host bitfield ordering.
3597 (sparc_print_insn): Set the insn_info_valid field, and the
3598 other fields that describe the instruction being printed.
3600 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3602 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3603 `jmp' instead of just one of them.
3605 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3607 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3608 (fput_fp_reg_r): Renamed from fput_reg_r.
3609 (fput_fp_reg): New function.
3610 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3612 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3614 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3616 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3618 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3620 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3621 don't output a space.
3623 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3625 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3627 * mips-opc.c: New file, containing opcode table from
3628 ../include/opcode/mips.h.
3629 * Makefile.in: Add it.
3631 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3633 * m88k-dis.c: New file, moved in from gdb and changed to use the
3634 new dis-asm.h disassembler interface.
3635 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3636 (m88k-dis.o): New target.
3638 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3640 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3641 argument string const char * to correspond to opcode/mips.h.
3643 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3645 * mips-dis.c: Updated to account for name changes in new version
3647 * Makefile.in: Added header file dependencies.
3649 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3651 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3653 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3655 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3656 extend, rather than shifts.
3658 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3660 * Makefile.in: Undo 15 June change.
3662 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3664 * m68k-dis.c (print_insn_arg): Change return value to byte count
3666 * m68k-dis.c: Re-write to detect invalid operands before
3667 printing anything, so we can handle this the same way we
3668 handle invalid opcodes.
3670 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3672 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3674 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3676 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3679 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3681 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3683 * configure.in: Do make sysdep.h link.
3684 * Makefile.in: Search ../include. Don't search ../bfd.
3686 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3688 Changes from Jeff Law, law@cs.utah.edu:
3689 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3690 Do not print a space before the completers specified by
3693 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3695 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3696 defined, since gdb has been fixed.
3698 Changes from Jeff Law, law@cs.utah.edu:
3699 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3700 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3701 be a *disassemble_info, not a *FILE.
3702 * hppa-dis.c: Support 'd', '!', and 'a'.
3703 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3704 * hppa-dis.c: Delete cases which are no longer needed.
3706 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3708 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3710 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3712 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3715 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3717 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3718 * configure.in: No longer need to configure to get sysdep.h.
3720 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3722 * Patches from Jeffrey Law <law@cs.utah.edu>.
3723 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3724 templates for 1.1 FP computational instructions.
3726 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3728 * h8500-dis.c (print_insn_h8500): Address argument is type
3730 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3733 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3734 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3736 * sparc-dis.c (compare_opcodes): Move static declaration to
3739 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3741 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3742 instruction, remove unimp hack from 'l' argument.
3744 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3746 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3749 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3751 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3752 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3755 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3757 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3758 arrays of string pointers to 2-d arrays of chars, to save
3761 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3763 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3764 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3766 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3768 * hppa-dis.c: New file from Utah, adapted to new disassembler
3770 * Makefile.in: Include it.
3772 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3774 * sh-dis.c, sh-opc.h: New files.
3776 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3778 * alpha-dis.c, alpha-opc.h: New files.
3780 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3782 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3785 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3787 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3789 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3791 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3794 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3796 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3797 and double percent signs a few places.
3799 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3801 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3802 Use info->print_address_func not print_address.
3804 * dis-buf.c (generic_print_address): New function.
3806 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3808 * Makefile.in: Add sparc-dis.c.
3809 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3811 Add `add' instruction to the set that get checked
3812 for a preceding `sethi' in order to print an absolute address.
3813 * (print_insn): Disassembly prefers real instructions.
3814 (is_delayed_branch): Speed up.
3815 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3816 Still missing some float ops, and needs testing.
3817 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3818 F_ALIAS. Use printf, not fprintf, when not passing a file
3820 (compare_opcodes): Check that identical instructions have
3821 identical opcodes, complain otherwise.
3824 * Include reg_names.
3826 Use dis-asm.h/read_memory_func interface.
3828 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3830 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3831 deliberately return non-zero to setjmp from longjmp. Otherwise
3832 this code fails to compile.
3834 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3836 * m68k-dis.c: Fix prototype for fetch_arg().
3838 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3840 * dis-buf.c: New file, for new read_memory_func interface.
3841 Makefile.in (OFILES): Include it.
3842 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3843 Use new read_memory_func interface.
3845 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3847 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3848 * h8500-opc.h: Fix couple of opcodes.
3850 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3852 * Makefile.in: add dvi & installcheck targets
3854 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3856 * Makefile.in: Update for h8500-dis.c.
3858 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3860 * h8500-dis.c, h8500-opc.h: New files
3862 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3864 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3865 ../include/dis-asm.h.
3866 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3867 and ../gdb/m68k-pinsn.c).
3868 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3869 and ../gdb/i386-pinsn.c).
3870 * m68881-ext.c: New file. Moved definition of
3871 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3872 * Makefile.in: Adjust for new files.
3873 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3874 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3875 can be dis-assembled.
3877 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3879 * mips-dis.c (print_insn_arg): Now returns void.
3881 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3883 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3884 files that use the macros.
3886 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3888 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3889 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3890 (CFILES): Added mips-dis.c.
3892 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3894 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3895 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3897 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3899 * Makefile.in: Improve *clean rules.
3900 * configure.in: Allow a default host.
3902 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3904 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3905 files include other sysdep files
3907 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3909 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3911 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3913 * configure.in: For host support, use ../bfd/configure.host
3914 so it stays in sync with the ../bfd/hosts database.
3916 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3918 * configure.in: use cpu-vendor-os triple instead of nested cases
3920 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3922 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3923 *always* the wrong one.
3925 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3927 * z8kgen.c: added copyright info
3929 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3931 * z8k-dis.c (unparse_instr): prettier tabs
3932 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3934 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3936 * configure.in: Add ncr* configuration.
3937 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3938 picayune ANSI compilers happy.
3940 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3942 * configure.in (i386): Make i386 and i486 synonymous for now.
3943 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3945 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3947 * Makefile.in (install): Fix typo.
3949 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3951 * Makefile.in (make): Remove obsolete crud.
3952 (sparc-opc.o): Avoid Sun Make VPATH bug.
3954 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3956 * Makefile.in: since there are no SUBDIRS, remove rule and
3957 references of subdir_do.
3959 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3961 * Makefile.in (install): Get the library name right here too.
3962 Don't install bfd.h, since it's unrelated to this library. No
3963 subdirs to recurse into, either.
3964 (CFILES): The source file has a .c suffix, not .o.
3966 * sparc-opc.c: New file, moved from BFD.
3967 * Makefile.in (OFILES): Build it.
3969 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3971 * z8k-dis.c: fixed forward refferences of some declarations.
3973 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3975 * Makefile.in: get the name of the library right
3977 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3979 * z8k-dis.c: knows how to disassemble z8k stuff
3980 * z8k-opc.h: new file full of z8000 opcodes
3984 version-control: never