2 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
4 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
8 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
10 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
13 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
15 * mips-dis.c (print_insn_little_mips): Previously, instruction
16 printing references the symbol table to determine whether the
17 instruction resides in a block regular instructions or mips16
18 instructions. However, when the disassembler gets used in other
19 environments where the symbol table is not present, we no longer
20 rely in the symbol table, rather, use the low bit of the
21 instructions address to guess. There should be no change for usage
22 of the disassembler in host based programse, gdb ,objdump.
23 (print_insn_big_mips): ditto.
24 (print_insn_mips): ditto
26 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
28 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
30 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
33 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
34 operands for the am33.
35 (mn10300_opcodes): Add new instructions from the am33.
37 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
39 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
41 * i386-dis.c (index16): Add '%' to register names. Use ','
44 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
46 * i386-dis.c: Don't print opcode suffix when we can figure out the
47 size (and gas can!) by register operands, or from the default
49 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
51 (dis386, dis386_twobyte, grps): Use new suffix macros.
52 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
53 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
54 order of cmps operands to agree with Intel docs. Correct operand
55 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
56 agree with Intel docs.
57 (print_insn_x86): Print orphan fwait before other prefixes.
58 Return correct byte count for orphan fwait with prefixes. Don't
59 print `bound' operands in reverse order.
60 (ckprefix): Stop accumulating prefixes if we get fwait.
61 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
63 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
65 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
66 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
68 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
70 Fix problems when bfd_vma is wider than long.
71 * i386-dis.c: Make op_address and start_pc unsigned.
72 (set_op): Make parameter unsigned.
73 (print_insn_x86): Cast to bfd_vma when passing a value to
75 * ns32k-dis.c (CORE_ADDR): Don't define.
76 (print_insn_ns32k): Change type of addr to bfd_vma. Use
77 bfd_scan_vma to read back address.
78 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
80 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
81 (NEXTULONG): New definition.
82 (print_insn_m68k): Avoid overflow when computing third argument of
84 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
85 Use disp instead of val to store offset values.
86 (print_indexed): Use base_disp instead of word to store base
87 displacement, to avoid overflow.
88 * m10300-dis.c (disassemble): Cast value to long when computing
89 pc-relative address, to get correct sign extension.
91 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
93 * m32r-opc.c: Regenerate.
95 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
97 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
98 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
100 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
102 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
104 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
106 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
108 (OP_DSreg): Rename from OP_DSSI.
109 (OP_ESreg): Rename from OP_ESDI.
110 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
112 (append_seg): Rename from append_prefix.
113 (ptr_reg): New function.
114 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
116 (PREFIX_ADDR): Rename from PREFIX_ADR.
117 (float_reg): Add non-broken opcodes for people who don't want
120 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
122 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
125 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
127 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
129 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
131 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
132 0; produce error message for shifts of size 32 (or 64 for 64-bit
133 shifts), because the hardware doesn't support them.
136 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
138 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
141 * vu0.h (sqc2): Fix opcode.
143 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
147 start-sanitize-vr5400
148 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
150 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
151 Change pinfo to use WR_HILO.
155 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
157 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
158 LONG_2, LONG_2b formats to use this new operand.
161 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
163 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
165 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
167 * sparc-dis.c (print_insn_sparc): big endian instruction / little
171 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
173 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
174 and SHORT_B3b formats to use Rb instead of Ra.
176 Add FLAG_MUL16 to MUL2XH opcode.
178 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
179 to existing 1.1.1 parallelisation prohibition procedure.
182 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
184 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
185 * cgen-dis.in (extract_normal): Likewise.
186 * m32r-asm.c,m32r-dis.c: Regenerate.
189 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
191 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
195 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
197 * mips-opc.c (multu1): Add two operand variant for the r5900.
200 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
202 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
203 with a shift count of 0.
206 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
208 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
210 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
212 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
213 (_print_insn_mips): Likewise.
214 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
218 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
220 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
221 (cgen_hw_lookup_by_num): New function.
224 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
227 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
229 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
231 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
233 * sparc-dis.c (print_insn_sparc): Always fetch instructions
234 as big-endian on SPARClite.
237 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
239 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
241 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
246 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
248 * d30v-opc.c (pre_defined_register): Remove alias for r0.
252 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
254 * mips-opc.c (break): Added 20-bit single-operand break
255 instruction for R5900 only.
258 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
260 * po/Make-in (install-info): New target.
262 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
264 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
265 * configure: Rebuild.
267 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
269 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
270 variety of ISA2 instructions to set bottom ten bits of trap code.
272 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
274 * Makefile.am (config.status): Add explicit target so that
275 config.status depends upon bfd/configure.in.
276 * Makefile.in: Rebuild.
278 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
280 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
281 instructions to set bottom ten bits of break code.
282 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
283 for above optional argument.
285 start-sanitize-cygnus
286 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
288 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
289 * m32r-opc.h: Regenerate.
292 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
294 * makefile.vms: Run dec c with /nodebug.
296 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
298 * Makefile.in: Rebuilt.
299 * Makefile.am: Regenerated dependencies with mkdep.
301 * opintl.h (_): Define as dgettext.
303 start-sanitize-cygnus
304 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
306 * configure.in: Add support for --enable-cgen-maint.
307 * Makefile.am (M32R_DEPS): New variable.
308 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
309 * aclocal.m4: Regenerate.
310 * Makefile.in: Regenerate.
311 * configure: Regenerate.
313 * Makefile.am (CGENFILES): Add minsn.scm.
316 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
318 * cgen-asm.c: Internationalised.
319 start-sanitize-cygnus
320 * cgen-asm.in: Internationalised.
321 * cgen-opc.in: Internationalised.
323 * m32r-asm.c: Internationalised.
324 * m32r-dis.c: Internationalised.
325 * m32r-opc.c: Internationalised.
327 * aclocal.m4: Regenerated.
328 * configure: Regenerated.
329 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
330 * Makefile.in: Rebuild.
331 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
332 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
334 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
336 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
338 * aclocal.m4, configure: Rebuild with current tools.
340 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
342 * opintl.h: New file - contains internationalisation macros used
343 by source files in this directory.
344 * po/: New subdirectory - contains internationalisation files.
345 * po/Make-in: New file - Makefile constructor.
346 * po/POTFILES.in: New file - list of files in opcodes directory
347 that should be scan for internationalisation macros.
348 * po/opcodes.pot: New file - list of internationisation strings
349 found in files mentioned in po/POTFILES.in.
350 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
351 entry. Add intl directory to include paths.
352 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
353 HAVE_STRCPY, HAVE_LC_MESSAGES
354 * configure.in: Add rule to build Makefile in po subdirectory.
355 * Makefile.in: Rebuilt.
356 * aclocal.m4: Rebuilt.
357 * config.in: Rebuilt.
358 * configure: Rebuilt.
359 * alpha-opc.c: Internationalised.
360 * arc-dis.c: Internationalised.
361 * arc-opc.c: Internationalised.
362 * arm-dis.c: Internationalised.
363 * cgen-asm.c: Internationalised.
365 * d30v-dis.c: Internationalised.
367 * dis-buf.c: Internationalised.
369 * dvp-dis.c: Internationalised.
370 * dvp-opc.c: Internationalised.
372 * h8300-dis.c: Internationalised.
373 * h8500-dis.c: Internationalised.
374 * i386-dis.c: Internationalised.
375 * m10200-dis.c: Internationalised.
376 * m10300-dis.c: Internationalised.
377 * m68k-dis.c: Internationalised.
378 * m88k-dis.c: Internationalised.
379 * mips-dis.c: Internationalised.
380 * ns32k-dis.c: Internationalised.
381 * opintl.h: Internationalised.
382 * ppc-opc.c: Internationalised.
383 * sparc-dis.c: Internationalised.
384 * v850-dis.c: Internationalised.
385 * v850-opc.c: Internationalised.
387 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
389 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
390 (asm_hash_table_entries): New variable.
391 (cgen_asm_init): Free asm_hash_table_entries.
392 (hash_insn_array,hash_insn_list): New functions.
393 (build_asm_hash_table): Use them. Hash macro insns as well.
394 (cgen_asm_lookup_insn): Update.
395 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
396 (dis_hash_table_entries): New variable.
397 (cgen_dis_init): Free dis_hash_table_entries.
398 (hash_insn_array,hash_insn_list): New functions.
399 (build_dis_hash_table): Use them. Hash macro insns as well.
400 (cgen_dis_lookup_insn): Update.
401 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
402 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
403 (cgen_macro_insn_count): New function.
404 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
405 All callers updated. Sanity check result of extract fn.
406 (@arch@_cgen_get_insn_operands): Change result type to void.
407 Delete args insn_value, length. New arg fields. All callers updated.
408 (@arch@_cgen_lookup_get_insn_operands): New function.
409 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
411 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
413 * i386-dis.c (OP_DSSI): Print segment override.
416 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
418 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
422 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
424 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
428 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
430 * vu0.h (vlqd, vlqi): Update per revised specs.
434 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
436 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
437 (vif_operands): Update.
438 (vif_get_unpackloc): Delete.
439 (state_vif_unpackloc{,_star_p}): Delete.
440 (dvp_opcode_init_parse): Update.
441 (vif_unpack_len_value): Avoid divide by zero.
445 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
447 * vu0.h: Specs changed for VCALLMSR bit pattern.
448 * mips-dis.c: (print_insn_arg) Matching change.
451 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
453 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
456 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
458 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
459 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
460 * configure.in: Define and substitute WIN32LDFLAGS and
462 * aclocal.m4: Rebuild with new libtool.
463 * configure, Makefile.in: Rebuild.
466 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
468 * vu0.h: Corrected bit pattern for VMAXI opcode.
471 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
473 * m32r-opc.c: Regenerate.
476 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
478 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
479 (dvp_expand_macro): Implement.
480 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
481 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
484 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
486 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
487 before trying to copy it.
488 * Makefile.in: Rebuild.
490 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
492 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
495 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
497 * m32r-opc.c: Fix bit patterns for SAT and SATB.
500 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
502 * ns32k-dis.c (bit_extract_simple): New function to extract bits
503 from an arbitrary valid buffer instead of fetching them on demand
505 (invalid_float): use bit_extract_simple() instead of bit_extract().
508 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
510 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
511 * m32r-opc.h: Add extra control registers.
514 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
516 From H.J. Lu <hjl@gnu.org>:
517 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
520 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
522 * Branched binutils 2.9.
525 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
527 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
528 disassembling last 4 bytes of a section.
531 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
533 Fix some gcc -Wall warnings:
534 * arc-dis.c (print_insn): Add casts to avoid warnings.
535 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
536 * d10v-dis.c (dis_long, dis_2_short): Likewise.
538 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
539 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
540 (parse_bc, parse_vfreg, parse_accdest): Likewise.
541 (parse_ffstreg, parse_vif_mode): Likewise.
543 * m10200-dis.c (disassemble): Likewise.
544 * m10300-dis.c (disassemble): Likewise.
545 * ns32k-dis.c (print_insn_ns32k): Likewise.
546 * ppc-opc.c (insert_ral, insert_ram): Likewise.
547 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
548 * cgen-opc.c (cgen_keyword_search_next): Likewise.
549 * d10v-dis.c (dis_long, dis_2_short): Likewise.
551 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
554 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
555 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
556 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
558 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
560 * tic80-dis.c (print_one_instruction): Likewise.
562 * w65-dis.c (print_operand): Likewise.
563 * z8k-dis.c (fetch_data): Likewise.
564 * a29k-dis.c: Add return type for find_byte_func_type.
565 * arc-opc.c: Include <stdio.h>. Remove declarations of
566 insert_multshift and extract_multshift.
568 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
570 (extract_value): Fully parenthesize expression.
573 * dvp-opc.c: Include <ctype.h>.
574 (print_sdest): Add default case to switch.
576 * h8500-dis.c (print_insn_h8500): Initialize local variables.
577 * h8500-opc.h (h8500_table): Fully bracket initializer.
578 * w65-opc.h (optable): Likewise.
579 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
580 * i386-dis.c (OP_E): Initialize local variables.
581 * m10200-dis.c (print_insn_mn10200): Likewise.
582 * mips-dis.c (print_insn_mips16): Likewise.
583 * sh-dis.c (print_insn_shx): Likewise.
584 * v850-dis.c (print_insn_v850): Likewise.
585 * ns32k-dis.c (print_insn_arg): Declare.
586 (get_displacement, invalid_float): Declare.
587 (list_search, sign_extend, flip_bytes): Declare return type.
588 (get_displacement): Likewise.
589 (print_insn_arg): Likewise. Make d int. Fix sprintf format
591 (print_insn_ns32k): Make i unsigned.
592 (invalid_float): Make static. Declare type of val.
593 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
594 on each for iteration.
595 * tic30-dis.c (get_indirect_operand): Likewise.
596 * z8k-dis.c (print_insn_z8001): Declare return type.
597 (print_insn_z8002): Likewise.
598 (unparse_instr): Fix sprintf format strings.
600 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
602 * mips-opc.c: Add "sync.l" and "sync.p".
605 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
607 * dvp-opc.c (extract_vif_datalen): Rewrite.
608 (vif_insn_len): Perform 0->max+1 conversion for direct length.
610 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
612 * dvp-dis.c (print_insn): Print unpack address in hex.
613 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
614 Don't skip over '*', just record it.
615 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
616 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
617 Don't skip over '*', just record it.
618 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
619 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
620 (vif_opcodes): Likewise.
621 (state_vif_{mpg,unpack}loc_star_p): New static locals.
622 (vif_macros,vif_macro_count): New globals.
623 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
624 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
625 (vif_get_wl_cl): New function.
626 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
629 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
631 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
632 default m68k variant to recognize.
634 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
635 (ctrl, cobr, mem, ea): Likewise.
636 (print_addr): Likewise. Remove cast.
637 (ea): Cast argument of print_addr to bfd_vma.
639 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
641 (cgen_parse_unsigned_integer): Likewise.
642 (cgen_parse_address): Likewise.
644 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
646 * i960-dis.c (ctrl): Add full braces to structure initialization.
647 (cobr, mem, reg): Likewise.
648 (ea): Correct parenthesization in expression.
650 * cgen-asm.c: Include <ctype.h>.
651 (build_asm_hash_table): Remove unused local variable i.
652 (cgen_parse_keyword): Add casts to avoid warnings.
654 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
655 symbol. Fix indentation.
656 (print_insn_little_arm): Likewise.
659 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
661 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
666 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
668 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
673 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
675 * dvp-opc.c (vif_operand_datalen_special): New global.
679 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
681 * vu0.h (vcallms): Use 'O' for call target operand.
682 * mips-dis.c (print_insn_arg): Handle 'O'.
685 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
687 * configure.in: Use AM_DISABLE_SHARED.
688 * aclocal.m4, configure: Rebuild with libtool 1.2.
691 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
693 * mips-dis.c: Change '%' to '#' in r5900 support.
697 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
699 These patches are courtesy of Jonathan Walton and Tony Thompson
700 (athompso@cambridge.arm.com).
702 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
705 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
706 both the offset and the label closest to the destination.
709 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
711 * vu0.h: New file with cop2/vu0 instructions.
712 * mips-opc.c: Include vu0.h.
713 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
715 (print_insn_mips): Do not emit a tab after an instruction if the
716 first arg is an instruction completer (&). If the next arg is an
717 escape character (%), then print the next arg verbatim.
718 * Makefile.am (mips-opc.lo): Depend on vu0.h
722 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
724 * dvp-opc.c (vif_opcodes): Add stcycl.
726 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
728 * dvp-dis.c (print_dma): Change length from 16 to 8.
731 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
733 * m32r-opc.h: Regenerate.
736 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
738 * dvp-opc.c (print_dest1): Print dest spec again.
739 (print_vfreg,print_accdest): Likewise.
740 (vif_unpack_len): Round result up to word boundary.
743 start-sanitize-vr4320
744 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
746 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
748 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
750 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
755 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
757 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
758 (print_insn): Do mask comparison on proper opcode word.
759 Print unsigned values in hex.
760 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
761 (parse_bc): Catch missing dest.
762 (parse_vfreg): Replace atoi call with strtol.
763 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
764 (parse_bcftreg,parse_ffstreg): Handle missing dest.
765 (extract_gif_eop): New function.
766 (gif_operands): Update eop entry.
767 (VGIFOP,VGIFNREGS): Fix calcs.
768 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
769 (gif_regs): Add entry for unused 11 case.
770 (print_gif_regs): Print empty list instead of nothing.
771 (extract_gif_nloop): Fix value calc.
772 (print_gif_nloop): Always print value, even if 0.
773 (insert_vif_wlcl,extract_vif_wlcl): New functions.
774 (vif_operands): Use them for wl,cl fields.
775 (state_vif_wl,state_vif_cl): New static locals.
776 (parse_vif_mode): Handle numeric args.
777 (vif_unpack_len_value,vif_unpack_len): New functions.
778 (vif_insn_len): Call vif_unpack_len.
781 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
783 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
785 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
787 * cgen-asm.in: Move insertion of generated routines to top of file.
788 (insert_normal): Add prototype. Delete `shift' arg.
789 * cgen-dis.in: Move insertion of generated routines to top of file.
790 (extract_normal): Add prototype. Delete `shift' arg.
791 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
792 (print_keyword): Add prototype. Fix type of `attrs' arg.
794 start-sanitize-vr4320
795 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
797 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
798 * mips-opc.c ("mac","dmac") : Added 4320 insns.
801 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
803 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
804 assume that info->symbols is non-empty.
806 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
808 * alpha-opc.c (cvtqs) There is no such thing.
809 (cvttq): Missing most of the /*d variants.
812 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
814 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
816 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
817 (r5900/msub.s): Takes three operands, not four. Fix opcode.
821 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
823 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
824 delayed branches or jumps.
828 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
830 * dvp-opc.c (vif_operands): Add unpack[u] support.
831 (vif_opcodes): Ditto.
832 (*_vif_imrubits): Renamed from *_vif_imrbits.
834 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
836 * dvp-dis.c (print_insn): Handle word number.
837 Handle mips address vs vu address.
838 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
839 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
840 ({insert,extract}_dma_addr): Fix word ofset.
841 ({insert,print}_gif_regs): Fix encode/decode.
844 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
846 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
848 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
849 * tic30-dis.c (print_branch): Likewise.
851 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
852 * dvp-dis.c (dvp_info_mach_type): New function.
853 (print_insn_dvp): Call it.
854 (print_vif): Return length of 4 if mpg or direct insn so following
855 insns get properly disabled.
856 (print_gif): Fix word order.
857 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
858 (gif_operands): Fix word order.
859 (gif_opcodes): Likewise.
860 ({insert,extract,print}_gif_regs): Likewise.
861 (gif_regs): Add new register number/name changes.
862 (dma_opcodes): Add dmarefe insn.
865 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
867 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
868 saved_symbol code as it is no longer needed.
870 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
872 * cgen-asm.c: Include symcat.h.
873 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
875 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
878 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
880 * dvp-opc.c (extra_dma_flags): Fix typos.
881 (dma_operands): Fix word numbers.
882 (dma_opcodes): Likewise.
883 ({insert,extract}_dma_flags): Likewise.
886 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
888 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
891 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
893 * dvp-dis.c (print_gif): Complete.
894 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
895 (state_gif_{nregs,regs,nloop}): New static locals.
897 (dvp_opcode_init_{parse,print}): Init gif state locals.
898 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
899 (vif_insn_len): Handle `unpack'.
900 ({insert,extract}_dma_flags): Complete.
904 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
906 * mips-opc.c (mula.s): Renamed from multa.s.
909 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
911 * m32r-opc.[ch]: Regenerate.
914 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
916 * dvp-opc.c (dma_operands): Rewrite.
917 (dma_operand_{count,addr}): New globals.
918 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
919 (insert_dma_addr): Insert value into insn.
920 (extract_dma_addr): Extract value from insn.
922 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
924 * dvp-dis.c (print_vu): Handle loi insns.
925 (print_insn): Likewise.
926 * dvp-opc.c (vu_lower_opcodes): Add "loi".
927 (vu_operands): Make LDEST1 a FAKE operand.
928 (parse_dest1): Allow elided argument.
929 (print_dest1): Don't print the argument.
931 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
933 * dvp-opc.c (parse_vfreg): Dest spec is optional.
934 (print_vfreg): Don't print dest spec.
935 (parse_accdest): Dest spec is optional.
936 (print_accdest): Don't print dest spec.
939 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
941 * Makefile.am (CGENFILES): Update.
942 * Makefile.in: Regenerate.
943 * cgen-asm.in (insert_normal): Result is error message now.
944 Validate value to be inserted.
945 (insert_insn_normal): Result is error message now.
946 (@arch@_cgen_assemble_insn): Update.
947 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
948 arguments. Don't perform validation here.
949 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
951 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
953 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
954 operand instance list.
955 * m32r-opc.c: Regenerate.
957 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
959 * Makefile.am (AUTOMAKE_OPTIONS): Define.
960 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
962 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
964 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
966 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
968 * configure.in: Get the version number from BFD.
969 * configure: Rebuild.
971 From H.J. Lu <hjl@gnu.org>:
972 * Makefile.am (libopcodes_la_LDFLAGS): Define.
973 * Makefile.in: Rebuild.
975 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
977 * m32r-opc.c: Regenerate.
978 * m32r-opc.h: Regenerate.
980 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
982 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
983 Ignore ALIAS insns if asked to.
984 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
985 * m32r-opc.c: Regenerate.
988 * dvp.opc.c: Nicely format opcode tables.
989 (vu_operands): New element UFLAGS.
990 (parse_uflags,print_uflags): New functions.
991 (vu_upper_opcodes): Add UFLAGS to all insns.
994 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
996 Fix rac to accept only a0:
997 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
998 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
999 Introduce OPERAND_GPR.
1000 * d10v-dis.c (print_operand): Likewise.
1002 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1004 * cgen-opc.in: New file.
1005 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1006 * Makefile.am (CGENFILES): Add cgen-opc.in.
1007 * Makefile.in: Regenerate.
1009 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1010 (cgen_hw_lookup): Make result const.
1012 * cgen-dis.in (*): Use PTR instead of void *.
1013 (print_insn): Delete unused vars `i', `syntax'.
1015 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1018 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1020 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1021 (vif_opcodes): Update renamed insns.
1022 * dvp-dis.c (*): Likewise.
1025 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1027 * configure, aclocal.m4: Rebuild with new libtool.
1030 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1032 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1033 instructions use a PC relative branch, not absolute.
1036 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1038 * configure.in: Set libtool_enable_shared rather than
1039 libtool_shared. Remove diversion hack.
1040 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1042 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1044 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1045 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1047 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1049 * tic30-dis.c: New file.
1050 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1051 * configure.in: Handle bfd_tic30_arch.
1052 * Makefile.am: Rebuild dependencies.
1053 (CFILES): Add tic30-dis.c
1054 (ALL_MACHINES): Add tic30-dis.lo.
1055 * configure, Makefile.in: Rebuild.
1057 start-sanitize-m32rx
1058 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1060 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1061 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1062 macwhi-a and macwlo-a instructions.
1066 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1068 * dvp-opc.c, fixed encoding of a bunch of instructions to
1069 be consistent with the asmvu assembler (and inconsistent
1070 with the specification).
1072 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1074 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1075 in the opcode table. The pkemscalf instruction must come first.
1077 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1079 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1082 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1084 * m32r-opc.h (HAVE_CPU_M32R): Define.
1087 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1089 * dvp-dis.c, dvp-opc.c: New files.
1090 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1091 * configure: Regenerate.
1092 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1093 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1094 (mips-dis.lo): Compile with @archdefs@.
1095 * Makefile.in: Regenerate.
1096 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1097 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1100 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1102 * v850-opc.c (insertion routines): If both alignment and size is
1103 wrong then report this.
1105 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1107 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1108 Only recognize instructions for the current target_processor.
1110 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1112 * d10v-dis.c (PC_MASK): Correct value.
1113 (print_operand): If there's a reloc, don't calculate the
1114 address because they could be in different sections.
1116 start-sanitize-cygnus
1117 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1119 * cgen.sh: Rewrite to be like simulator's version.
1120 * Makefile.am (cgen): Update call to cgen.sh.
1121 * Makefile.in: Regenerate
1124 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1126 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1127 instruction after the 4650's "mul" instruction; nobody's using the
1128 4010 these days. If object files someday indicate which processor
1129 variant they're intended for, we can do a better job at this.
1131 start-sanitize-r5900
1132 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1134 * mips-opc.c (c.lt.s): Add r5900 variant.
1138 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1140 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1141 table provided entry size. Use CGEN_INSN_MNEMONIC.
1142 (cgen_parse_keyword): Rewrite.
1143 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1144 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1145 * cgen-opc.c: Clean up pass over `struct foo' usage.
1146 (cgen_keyword_lookup_value): Handle "" entry.
1147 (cgen_keyword_add): Likewise.
1148 start-sanitize-cygnus
1149 * Makefile.am: Add cgen support.
1150 * Makefile.in: Regenerate.
1151 * configure.in: Add cgen support.
1152 * configure: Regenerate.
1153 * aclocal.m4: Regenerate.
1154 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1157 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1159 * mips-opc.c: Add FP_D to s.d instruction flags.
1161 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1163 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1165 start-sanitize-tic80
1166 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1168 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1169 PC relative offset forms before the 15 bit forms. An assembler command
1170 line option now chooses the default.
1173 start-sanitize-r5900
1174 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1176 * mips-opc.c: Add many missing r5900 instructions.
1180 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1182 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1183 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1186 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1188 * configure: Only build libopcodes shared if --enable-shared's value
1189 was `yes', or was set to `*opcodes*'.
1190 * aclocal.m4: Likewise.
1191 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1192 original source of this bit of code. It's not clear what the best fix
1195 start-sanitize-r5900
1196 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1198 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1200 start-sanitize-tic80
1201 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1203 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1204 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1205 offset forms before the 15 bit forms, to default to the long forms.
1208 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1210 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1212 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1214 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1215 symbol if none is present.
1216 (print_insn_big_arm): Prevent examination of stored symbol if
1219 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1221 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1223 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1225 * disassemble.c: Remove disasm_symaddr() function.
1227 * arm-dis.c: Use info->symbol instead of info->flags to determine
1228 if disassmbly should be in Thumb or Arm mode.
1230 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1232 * arm-dis.c: Add support for disassembling Thumb opcodes.
1233 (print_insn_thumb): New function.
1235 * disassemble.c (disasm_symaddr): New function.
1237 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1238 (thumb_opcodes): Table of Thumb opcodes.
1240 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1242 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1244 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1245 and 'v' as operand types.
1247 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1249 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1250 <olivier.carmona@di.epfl.ch>.
1251 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1252 which has a two word opcode with a one word argument.
1255 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1257 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1258 unsigned, not signed.
1259 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1262 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1264 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1265 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1266 (ftrv): Slay the cut-and-paste monster.
1268 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1270 * d10v-dis.c (print_operand):
1271 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1273 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1275 * d10v-opc.c (OPERAND_FLAG): Split into:
1276 (OPERAND_FFLAG, OPERAND_CFLAG) .
1280 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1282 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1283 field for all INSN_MACRO's.
1284 * mips16-opc.c: same
1286 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1288 * mips-opc.c (sync,cache): These are 3900 insns.
1290 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1292 sh-opc.h (sh_table): Remove ftst/nan.
1294 start-sanitize-vr5400
1295 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1297 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1298 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1300 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1304 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1306 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1307 Add tx49 insns and configury.
1310 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1312 * mips-opc.c (ffc, ffs): Fix mask.
1315 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1317 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1321 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1323 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1324 start-sanitize-vr5400
1325 Added VR5400 instructions.
1326 (N5): New cpu-id macro.
1328 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1330 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1332 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1333 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1335 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1337 * v850-dis.c (disassemble): Replace // with /* ... */
1339 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1341 * sparc-opc.c: Add wr & rd for v9a asr's.
1342 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1343 (v9a_asr_reg_names): New variable.
1344 Patch from David Miller <davem@vger.rutgers.edu>.
1346 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1348 * sparc-opc.c (v9notv9a): New insn type.
1349 (IMPDEP): Move to the end to not conflict with edge8 et al.
1350 Patch from David Miller <davem@vger.rutgers.edu>.
1352 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1354 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1356 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1358 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1360 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1362 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1363 of disassemble_info structure to determine if an overlay address
1364 has a matching symbol in low memory.
1366 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1367 new symbol_at_address_func field in disassemble_info structure.
1369 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1371 * v850-opc.c (extract_d22): Use signed arithmatic.
1373 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1375 * mips-opc.c: Three op mult is not an ISA insn.
1377 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1379 * mips-opc.c: Fix formatting.
1381 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1383 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1384 than assuming that char is signed. Explicitly sign extend 16 bit
1385 values, rather than assuming that short is 16 bits.
1386 (OP_sI, OP_J, OP_DIR): Likewise.
1388 start-sanitize-v850e
1389 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1391 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1395 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1397 * v850-opc.c: Fix typo in comment.
1399 * v850-dis.c (disassemble): Add test of processor type when
1400 determining opcodes.
1402 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1404 * configure.in: Use a diversion to set enable_shared before the
1405 arguments are parsed.
1406 * configure: Rebuild.
1408 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1410 * m68k-opc.c (TBL1): Use ! rather than `.
1411 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1413 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1415 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1417 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1419 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1422 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1423 * aclocal.m4: Rebuild with new libtool.
1424 * configure: Rebuild.
1426 start-sanitize-v850e
1427 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1429 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1432 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1434 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1436 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1438 * v850-opc.c (v850_opcodes): Further rearrangements.
1441 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1443 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1446 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1448 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1451 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1453 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1455 * mips16-opc.c: Added mips16 sdbbp.
1458 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1460 * v850-opc.c: Initialise processors field of v850_opcode structure.
1463 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1465 Merge changes from Martin Hunt:
1467 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1469 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1470 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1471 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1473 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1475 * d30v-dis.c (print_insn): First operand of d*i (delayed
1476 branch) instructions is relative.
1478 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1479 (d30v_operand_table): Add IMM6S3 type.
1480 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1482 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1483 and cmp instructions.
1485 * d30v-opc.c: Correct entries for repeat*, and sat*.
1486 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1487 types. Correct several formats.
1489 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1491 * d30v-opc.c (pre_defined_registers): Change control registers.
1493 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1494 SHORT_C2. Manual was incorrect.
1496 * d30v-dis.c (lookup_opcode): Return value now indicates
1497 if an opcode has a short and a long form. Used for deciding
1498 to append a ".s" or ".l".
1499 (print_insn): Append a ".s" to an instruction if it is
1500 the short form and ".l" if it is a long form. Do not append
1501 anything if the instruction has only one possible size.
1503 * d30v-opc.c: Change mulx2h to require an even register.
1504 New form: SHORT_A2; a SHORT_A form that needs an even
1505 register as the first operand.
1507 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1508 instruction was not being disassembled if there were an odd
1509 number of instructions.
1511 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1514 start-sanitize-v850e
1515 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1517 * v850-dis.c (disassemble): Improved display of register lists.
1520 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1522 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1523 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1524 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1525 fandnot1s, fandnot2s.
1527 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1529 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1531 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1533 * cgen-asm.c (cgen_parse_address): New argument resultp.
1534 All callers updated.
1535 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1537 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1539 * mn10200-dis.c (disassemble): PC relative instructions are
1540 relative to the next instruction, not the current instruction.
1542 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1544 * v850-dis.c (disassemble): Only signed extend values that are not
1545 returned by extract functions.
1546 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1548 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1550 * v850-opc.c: Update comments. Remove use of
1551 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1553 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1555 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1557 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1559 * configure: Rebuilt with latest devo autoconf for NT support.
1561 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1563 * v850-dis.c (disassemble): Use curly brace syntax for register
1566 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1567 where r0 is being used as a destination register.
1569 start-sanitize-v850e
1570 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1572 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1575 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1577 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1578 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1579 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1580 Add insns to access SGR and DBR.
1581 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1583 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1585 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1587 start-sanitize-v850e
1588 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1590 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1591 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1594 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1596 * configure (cgen_files): Add support for v850e target.
1597 * configure.in (cgen_files): Add support for v850e target.
1599 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1601 * configure (cgen_files): Add support for v850ea target.
1602 * configure.in (cgen_files): Add support for v850ea target.
1605 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1607 * configure.in (bfd_arc_arch): Add.
1608 * configure: Rebuild.
1609 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1610 * Makefile.in: Rebuild.
1611 * arc-dis.c, arc-opc.c: New files.
1612 * disassemble.c (ARCH_all): Define ARCH_arc.
1613 (disassembler): Add ARC support.
1615 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1617 start-sanitize-v850e
1618 * v850-dis.c (disassemble): Add support for v850EA instructions.
1620 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1621 (v850_opcodes): Add v850EA instructions.
1623 * v850-dis.c (disassemble): Add support for v850E instructions.
1625 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1626 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1627 insert_spe, extract_spe): New Functions.
1628 (v850_opcodes): Add v850E instructions.
1631 * v850-opc.c: Reorganised and re-layed out to improve readability
1634 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1636 * configure: Rebuild with autoconf 2.12.1.
1638 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1640 * aclocal.m4, configure: Rebuild with new automake patches.
1642 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1644 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1645 * acinclude.m4: Just include acinclude.m4 from BFD.
1646 * aclocal.m4, configure: Rebuild.
1648 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1650 * Makefile.am: New file, based on old Makefile.in.
1651 * acconfig.h: New file.
1652 * acinclude.m4: New file.
1653 * stamp-h.in: New file.
1654 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1655 Removed shared library handling; now handled by libtool. Replace
1656 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1657 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1658 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1659 handling in AC_OUTPUT.
1660 * dep-in.sed: Change .o to .lo.
1661 * Makefile.in: Now built with automake.
1662 * aclocal.m4: Now built with aclocal.
1663 * config.in, configure: Rebuild.
1665 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1667 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1669 start-sanitize-r5900
1670 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1672 * mips-opc.c: Fix coding of mtsa.
1675 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1677 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1679 * sparc-dis.c (sorted_opcodes): New static local.
1680 (struct opcode_hash): `opcode' is pointer to const element.
1681 (build_hash): First arg is now table of sorted pointers.
1682 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1683 (compare_opcodes): Update.
1685 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1687 * cgen-opc.c: #include <ctype.h>.
1688 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1689 Handle case insensitive hashing.
1690 (hash_keyword_value): Change type of `value' to unsigned int.
1692 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1694 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1695 precision FP, mark it as such. Likewise for double precision
1696 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1698 start-sanitize-r5900
1699 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1702 start-sanitize-r5900
1703 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1705 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1706 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1709 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1711 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1713 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1714 nesting depth when all the macros are expanded.
1716 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1718 * sparc-opc.c: The fcmp v9a instructions take an integer register
1719 as a destination, not a floating point register. From Christian
1720 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1722 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1724 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1725 syntax. From Roman Hodek
1726 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1728 * i386-dis.c (twobyte_has_modrm): Fix pand.
1730 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1732 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1734 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1736 * arm-dis.c: Add prototypes for arm_decode_shift and
1739 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1741 * mips-opc.c: Add r3900 insns.
1743 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1745 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1746 print delay slot instructions on the same line. When using a PC
1747 relative load, add a comment with the value being loaded if it can
1750 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1752 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1753 to pushS/popS for segment regs and byte constant so that
1754 pushw/popw printed when in 16 bit data mode.
1756 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1757 print cbtw, cwtd in 16 bit data mode.
1758 * i386-dis.c (putop): extra case W to support above.
1760 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1761 address size prefix in 16 bit address mode.
1763 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1765 * sh-dis.c: Reindent. Rename local variable fprintf to
1768 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1770 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1772 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1774 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1776 * mips16-opc.c (mip16_opcodes): same.
1778 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1780 * m68k-opc.c (moveb): Change $d to %d.
1782 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1784 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1785 (twobyte_has_modrm): Likewise.
1787 (OP_MMX, OP_EM, OP_MS): New static functions.
1789 * i386-dis.c: Revert patch of April 4. The output now matches
1792 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1794 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1797 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1799 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1801 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1803 * Makefile.in (install): Depend upon installdirs.
1804 (installdirs): New target.
1806 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1808 From Thomas Graichen <graichen@rzpd.de>:
1809 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1810 * configure: Rebuild.
1812 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1814 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1815 Delete string{,s}.h support.
1817 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1819 * cgen-asm.c (cgen_parse_operand_fn): New global.
1820 (cgen_parse_{{,un}signed_integer,address}): Update call to
1821 cgen_parse_operand_fn.
1822 (cgen_init_parse_operand): New function.
1823 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1824 from cgen_asm_init_parse.
1825 (m32r_cgen_assemble_insn): New operand `errmsg'.
1826 Delete call to as_bad, return error message to caller.
1827 (m32r_cgen_asm_hash_keywords): #if 0 out.
1829 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1831 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1833 [case 'J']: Fix typo in register name.
1835 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1837 * configure.in: Substitute SHLIB_LIBS.
1838 * configure: Rebuild.
1839 * Makefile.in (SHLIB_LIBS): New variable.
1840 ($(SHLIB)): Use $(SHLIB_LIBS).
1842 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1844 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1846 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1848 * disassemble.c (disassembler): Handle m32r.
1850 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1852 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1853 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1854 * Makefile.in (CFILES): Add them.
1855 (ALL_MACHINES): Add them.
1856 (dependencies): Regenerate.
1857 * configure.in (cgen_files): New variable.
1858 (bfd_m32r_arch): Add entry.
1859 * configure: Regenerate.
1861 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1863 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1864 * configure: Rebuild.
1866 * Makefile.in: Rebuild dependencies.
1868 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1870 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1873 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1875 * Branched binutils 2.8.
1877 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1879 * m10200-dis.c: Rename from mn10200-dis.c.
1880 * m10200-opc.c: Rename from mn10200-opc.c.
1881 * m10300-dis.c: Rename from mn10300-dis.c
1882 * m10300-opc.c: Rename from mn10300-opc.c.
1883 * Makefile.in: Update accordingly.
1885 * mips16-opc.c: Add mul and dmul macros.
1887 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1889 * makefile.vms: Update CFLAGS, add clean target.
1891 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1893 * mips-opc.c: Add "wait". From Ralf Baechle
1894 <ralf@gnu.ai.mit.edu>.
1896 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1897 * configure, config.in: Rebuild.
1898 * sysdep.h: Include <stdlib.h> if it exists.
1899 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1901 * Makefile.in: Rebuild dependencies.
1903 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1905 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1906 Andrew Bray <andy@madhouse.demon.co.uk>.
1908 * mips-opc.c: Add cast when setting mips_opcodes.
1910 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1912 * v850-dis.c (disassemble): Fix sign extension problem.
1913 * v850-opc.c (extract_d*): Fix sign extension problems to make
1914 disassembly calculate branch offsets correctly.
1916 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1918 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1920 * mips-opc.c: Add dctr and dctw.
1923 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1925 * d30v-dis.c (print_insn): Change the way signed constants
1928 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1930 * Makefile.in (BFD_H): New variable.
1931 (HFILES): New variable.
1932 (CFILES): Add all C files.
1933 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1934 Delete old dependencies, and build new ones.
1935 * dep-in.sed: New file.
1937 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1939 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1941 start-sanitize-coldfire
1942 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1944 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1947 end-sanitize-coldfire
1948 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1950 * mn10200-opc.c: Change "trap" to "syscall".
1951 * mn10300-opc.c: Add new "syscall" instruction.
1953 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1955 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1956 mulul insns on the coldfire.
1958 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1960 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1961 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1962 (print_insn_little_arm): Likewise.
1964 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1966 Based on patches from H.J. Lu <hjl@lucon.org>:
1967 * i386-dis.c (fetch_data): Add prototype.
1968 * m68k-dis.c (fetch_data): Add prototype.
1969 (dummy_print_address): Add prototype. Make static.
1970 * ppc-opc.c (valid_bo): Add prototype.
1971 * sparc-dis.c (build_hash_table): Add prototype.
1972 (is_delayed_branch, compute_arch_mask): Add prototypes.
1973 (print_insn_sparc): Make several local variables const.
1974 (compare_opcodes): Change arguments to const PTR. Add prototype.
1975 * sparc-opc.c (arg): Change name field to be const.
1976 (lookup_name, lookup_value): Add prototypes. Change table and
1977 name parameters to be const.
1978 (sparc_encode_asi): Change name parameter to be const.
1979 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1980 (sparc_encode_sparclet_cpreg): Likewise.
1981 (sparc_decode_asi): Change return type to be const.
1982 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1983 (sparc_decode_sparclet_cpreg): Likewise.
1985 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1987 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1988 Solaris doesn't like the combined options, and the -f is
1990 (stamp-tshlink, install): Likewise.
1992 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1994 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1997 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1999 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2001 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2003 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2006 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2008 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2010 start-sanitize-tic80
2011 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2013 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2015 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2017 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2020 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2022 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2023 floatformat_to_double to make portable.
2024 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2027 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2029 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2030 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2032 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2034 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2035 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2037 start-sanitize-tic80
2038 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2040 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2041 (OFF_SL_BR_SCALED): ... to this, and added the flag
2042 TIC80_OPERAND_BASEREL to the flags word.
2043 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2047 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2049 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2050 Change mips_opcodes from const array to a pointer,
2051 and change bfd_mips_num_opcodes from const int to int,
2052 so that we can increase the size of the mips opcodes table
2055 start-sanitize-tic80
2056 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2058 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2059 store BITNUM values in the table in one's complement form
2060 to match behavior when assembler is given a raw numeric
2061 value for a BITNUM operand.
2062 * tic80-dis.c (print_operand_bitnum): Ditto.
2066 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2068 * d30v-opc.c: Removed references to FLAG_X.
2071 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2073 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2076 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2078 * Makefile.in: Added d30v object files.
2079 * configure: (bfd_d30v_arch) Rebuilt.
2080 * configure.in: (bfd_d30v_arch) Added new case.
2081 * d30v-dis.c: New file.
2082 * d30v-opc.c: New file.
2083 * disassemble.c (disassembler) Add entry for d30v.
2086 start-sanitize-tic80
2087 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2089 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2090 representations for the floating point BITNUM values.
2092 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2094 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2095 in the table in one's complement form, as they appear in the
2097 (tic80_symbol_to_value): Use macros to access predefined
2099 (tic80_value_to_symbol): Ditto.
2100 (tic80_next_predefined_symbol): New function.
2101 * tic80-dis.c (print_operand_bitnum): Remove code that did
2102 one's complement for BITNUM values.
2105 start-sanitize-r5900
2106 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2108 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2111 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2113 * makefile.vms: Remove 8 bit characters. Update to latest
2116 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2118 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2120 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2122 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2123 (IMM24_PCREL): Likewise.
2125 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2127 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2128 address for an extended PC relative instruction that is not a
2131 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2133 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2136 start-sanitize-tic80
2137 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2139 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2140 (tic80_opcodes): Sort entries so that long immediate forms
2141 come after short immediate forms, making it easier for
2142 assembler to select the right one for a given operand.
2145 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2147 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2149 (print_insn_mips16): Likewise.
2151 start-sanitize-r5900
2152 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2154 * mips-opc.c: add r5900.
2157 start-sanitize-tic80
2158 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2160 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2161 a symbol class that restricts translation to just that
2162 class (general register, condition code, etc).
2164 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2166 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2167 and REG_DEST_E for register operands that have to be
2168 an even numbered register. Add REG_FPA for operands that
2169 are one of the floating point accumulator registers.
2170 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2171 (tic80_opcodes): Change entries that need even numbered
2172 register operands to use the new operand table entries.
2173 Add "or" entries that are identical to "or.tt" entries.
2176 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2178 * mips16-opc.c: Add new cases of exit instruction for
2180 * mips-dis.c (print_mips16_insn_arg): Display floating point
2181 registers in operands of exit instruction. Print `$' before
2182 register names in operands of entry and exit instructions.
2184 start-sanitize-tic80
2185 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2187 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2188 pairs for all predefined symbols recognized by the assembler.
2189 Also used by the disassembling routines.
2190 (tic80_symbol_to_value): New function.
2191 (tic80_value_to_symbol): New function.
2192 * tic80-dis.c (print_operand_control_register,
2193 print_operand_condition_code, print_operand_bitnum):
2194 Remove private tables and use tic80_value_to_symbol function.
2197 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2199 * d10v-dis.c (print_operand): Change address printing
2200 to correctly handle PC wrapping. Fixes PR11490.
2202 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2204 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2207 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2209 * mips-dis.c (print_insn_mips16): Set insn_info information.
2210 (print_mips16_insn_arg): Likewise.
2212 * mips-dis.c (print_insn_mips16): Better handling of an extend
2213 opcode followed by an instruction which can not be extended.
2215 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2217 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2218 coldfire moveb instruction to not allow an address register as
2219 destination. Although the documentation does not indicate that
2220 this is invalid, experiments uncovered unexpected behavior.
2221 Added a comment explaining the situation. Thanks to Andreas
2222 Schwab for pointing this out to me.
2224 start-sanitize-tic80
2225 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2227 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2228 entries are presorted so that entries with the same mnemonic are
2229 adjacent to each other in the table. Sort the entries for each
2230 instruction so that this is true.
2233 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2235 * m68k-dis.c: Include <libiberty.h>.
2236 (print_insn_m68k): Sort the opcode table on the most significant
2237 nibble of the opcode.
2239 start-sanitize-tic80
2240 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2242 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2243 "vsub", "vst", "xnor", and "xor" instructions.
2244 (V_a1): Renamed from V_a, msb of accumulator reg number.
2245 (V_a0): Add macro, lsb of accumulator reg number.
2247 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2249 * tic80-dis.c (print_insn_tic80): Broke excessively long
2250 function up into several smaller ones and arranged for
2251 the instruction printing function to be callable recursively
2252 to print vector instructions that have both a load and a
2253 math instruction packed into a single opcode.
2254 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2255 to explain why it comes after the other vector opcodes.
2258 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2260 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2261 move insns to handle immediate operands.
2263 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2265 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2266 fix operand mask in the "moveml" entries for the coldfire.
2268 start-sanitize-tic80
2269 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2271 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2272 New macros for building vector instruction opcodes.
2273 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2274 FMT_LI, which were unused. The field is now a flags field.
2275 Remove some opcodes that are possible, but illegal, such
2276 as long immediate instructions with doubles for immediate
2277 values. Add "vadd" and "vld" instructions.
2279 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2281 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2282 the order more logical. Move the shift alias instructions ("rotl",
2283 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2284 interspersed with the regular sr.x and sl.x instructions. Add
2285 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2286 "sub", "subu", "swcr", and "trap".
2288 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2290 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2291 (OFF_SL_PC): Renamed from OFF_SL.
2292 (OFF_SS_BR): New operand type for base relative operand.
2293 (OFF_SL_BR): New operand type for base relative operand.
2294 (REG_BASE): New operand type for base register operand.
2295 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2296 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2297 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2299 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2300 10 char field, padded with spaces on rhs, rather than a string
2301 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2302 than old TIC80_OPERAND_RELATIVE. Add support for new
2303 TIC80_OPERAND_BASEREL flag bit.
2305 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2307 * tic80-dis.c (print_insn_tic80): Print floating point operands
2309 * tic80-opc.c (SPFI): Add single precision floating point
2310 immediate operand type.
2311 (ROTATE): Add rotate operand type for shifts.
2312 (ENDMASK): Add for shifts.
2313 (n): Macro for the 'n' bit.
2314 (i): Macro for the 'i' bit.
2315 (PD): Macro for the 'PD' field.
2316 (P2): Macro for the 'P2' field.
2317 (P1): Macro for the 'P1' field.
2318 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2322 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2324 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2325 adding in current address for pc-relative operands.
2327 start-sanitize-tic80
2328 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2330 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2331 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2332 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2333 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2334 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2335 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2336 (REG_SCALED, LSI_SCALED): New operand types.
2337 (E): New macro for 'E' bit at bit 27.
2338 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2339 opcodes, including the various size flavors (b,h,w,d) for
2340 the direct load and store instructions.
2342 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2344 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2346 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2347 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2348 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2349 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2350 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2351 masks with "MASK_* & ~M_*" to get the M bit reset.
2352 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2354 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2357 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2358 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2360 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2361 CC, SICR, and LICR table entries.
2362 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2363 "bcnd", and "brcr" opcodes.
2366 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2368 * ppc-opc.c (powerpc_operands): Make comment match the
2369 actual fields (no shift field).
2370 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2371 start-sanitize-tic80
2372 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2373 partial implementation, work in progress.
2374 * tic80-opc.c (tic80_operands): Begin construction operands table.
2375 (tic80_opcodes): Continue populating opcodes table and start
2376 filling in the operand indices.
2377 (tic80_num_opcodes): Add this.
2380 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2382 * m68k-opc.c: Add #B case for moveq.
2384 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2386 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2387 before they are used.
2389 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2391 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2392 for "breakpoint" instruction.
2394 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2396 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2397 (dep): Use ALL_CFLAGS rather than CFLAGS.
2399 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2401 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2404 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2406 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2407 start-sanitize-tic80
2408 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2411 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2413 * mips16-opc.c: Add "abs".
2415 start-sanitize-tic80
2416 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2418 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2419 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2420 (disassembler): Add bfd_arch_tic80 support to set disassemble
2421 to print_insn_tic80.
2422 * tic80-dis.c (print_insn_tic80): Add stub.
2424 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2426 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2427 * configure: Regenerate with autoconf.
2428 * tic80-dis.c: Add file.
2429 * tic80-opc.c: Add file.
2432 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2434 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2436 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2438 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2439 (mn10200_opcodes): Use it for some logicals and btst insns.
2440 Add "break" and "trap" instructions.
2442 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2444 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2446 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2448 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2449 relative load or add now depends upon whether the instruction is
2452 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2454 * mn10200-dis.c: Finish writing disassembler.
2455 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2456 Fix mask for "jmp (an)".
2458 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2459 handle endianness issues for mn10300.
2461 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2463 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2465 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2466 instruction. Fix opcode field for "movb (imm24),dn".
2468 * mn10200-opc.c (mn10200_operands): Fix insertion position
2471 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2473 * mn10200-opc.c: Create mn10200 opcode table.
2474 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2475 but moving along nicely.
2477 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2479 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2481 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2483 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2484 specifiers for fmovem* instructions.
2486 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2488 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2490 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2492 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2495 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2497 * mn10300-opc.c: Add some comments explaining the various
2500 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2502 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2504 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2507 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2508 operand specifiers in fmovm* instructions.
2510 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2512 * ppc-opc.c (insert_li): Give an error if the offset has the two
2513 least significant bits set.
2515 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2517 * mips-dis.c (print_insn_mips16): Separate the instruction from
2518 the arguments with a tab, not a space.
2520 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2522 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2525 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2528 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2530 * configure: Rebuild with autoconf 2.12.
2532 Add support for mips16 (16 bit MIPS implementation):
2533 * mips16-opc.c: New file.
2534 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2535 (mips16_reg_names): New static array.
2536 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2537 after seeing a 16 bit symbol.
2538 (print_insn_little_mips): Likewise.
2539 (print_insn_mips16): New static function.
2540 (print_mips16_insn_arg): New static function.
2541 * mips-opc.c: Add jalx instruction.
2542 * Makefile.in (mips16-opc.o): New target.
2543 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2544 * configure: Rebuild.
2546 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2548 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2549 operand specifiers in *save, *restore and movem* instructions.
2551 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2554 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2555 register operands for immediate arithmetic, not, neg, negx, and
2556 set according to condition instructions.
2558 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2559 specifier of the effective-address operand in immediate forms of
2560 arithmetic instructions. The specifier for the immediate operand
2561 notes how and where the constant will be stored.
2563 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2565 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2568 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2571 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2573 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2575 * mn10300-dis.c (disassemble): Handle register lists.
2577 * mn10300-opc.c: Fix handling of register list operand for
2578 "call", "ret", and "rets" instructions.
2580 * mn10300-dis.c (disassemble): Print PC-relative and memory
2581 addresses symbolically if possible.
2582 * mn10300-opc.c: Distinguish between absolute memory addresses,
2583 pc-relative offsets & random immediates.
2585 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2587 (disassemble): Handle SPLIT and EXTENDED operands.
2589 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2591 * mn10300-dis.c: Rough cut at printing some operands.
2593 * mn10300-dis.c: Start working on disassembler support.
2594 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2596 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2598 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2600 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2602 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2604 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2606 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2607 register argument is calls and jmp instructions.
2609 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2611 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2612 getx operand. Fix opcode for mulqu imm,dn.
2614 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2616 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2617 in MN10300_OPERAND_SPLIT operands for how many bits
2618 appear in the basic insn word. Add IMM32_HIGH24,
2619 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2620 (mn10300_opcodes): Use new operands as needed.
2622 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2623 for bset, bclr, btst instructions.
2624 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2626 * mn10300-opc.c (mn10300_operands): Remove many redundant
2627 operands. Update opcode table as appropriate.
2628 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2629 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2631 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2633 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2634 operands (for indexed load/stores). Fix bitpos for DI
2635 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2636 few instructions that insert immediates/displacements in the
2637 middle of the instruction. Add IMM8E for 8 bit immediate in
2638 the extended part of an instruction.
2639 (mn10300_operands): Use new opcodes as appropriate.
2641 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2643 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2644 sequential so the assembler never parallelizes it with
2647 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2650 a data/address register that appears in register field 0
2651 and register field 1.
2652 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2654 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2656 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2657 standard disassembly.
2659 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2660 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2661 Recategorize PALcode instructions.
2663 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2665 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2667 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2669 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2670 there are no operand types.
2672 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2674 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2676 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2678 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2680 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2682 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2684 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2685 and sst.w instructions.
2687 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2690 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2692 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2695 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2697 * ppc-opc.c (PPCPWR2): Define.
2698 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2701 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2703 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2704 field for movhu instruction.
2706 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2707 cast value to "long" not "signed long" to keep hpux10
2710 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2712 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2715 * mn10300-opc.c (FMT*): Remove definitions.
2717 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2718 for shift-by-register opcodes.
2720 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2721 into [AD][MN][01] for encoding the position of the register
2724 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2726 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2727 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2729 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2731 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2732 Fix various typos. Add "PAREN" operand.
2733 (MEM, MEM2): Define.
2734 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2735 operands. Fix several typos.
2737 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2740 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2742 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2743 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2745 (mn10300_opcodes): Break opcode format out into its own field.
2746 Update many operand fields to deal with signed vs unsigned
2747 issues. Fix one or two typos in the "mov" instruction
2748 opcode, mask and/or operand fields.
2750 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2752 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2753 m68851 wasn't reset.
2755 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2757 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2758 all opcodes. Very rough cut at operands for all opcodes.
2760 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2763 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2765 * mn10200-opc.c, mn10300-opc.c: New files.
2766 * mn10200-dis.c, mn10300-dis.c: New files.
2767 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2768 * disassemble.c: Break mn10x00 support into 10200 and 10300
2770 * configure.in: Likewise.
2771 * configure: Rebuilt.
2773 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2775 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2777 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2779 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2781 * disassemble (ARCH_mn10x00): Define.
2782 (disassembler): Handle bfd_arch_mn10x00.
2783 * configure.in: Recognize bfd_mn10x00_arch.
2784 * configure: Rebuilt.
2786 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2788 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2789 accordingly. Don't declare functions using op_rtn.
2791 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2793 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2794 params to be more standard.
2795 * (disassemble): Print absolute addresses and symbolic names for
2796 branch and jump targets.
2797 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2799 * (v850_opcodes): Add breakpoint insn.
2801 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2803 * m68k-opc.c: Move the fmovemx data register cases before the
2804 other cases, so that they get recognized before the data register
2805 does gets treated as a degenerate register list.
2807 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2809 * mips-opc.c: Add a case for "div" and "divu" with two registers
2810 and a destination of $0.
2812 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2814 * mips-dis.c (print_insn_arg): Add prototype.
2815 (_print_insn_mips): Ditto.
2817 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2819 * mips-dis.c (print_insn_arg): Print condition code registers as
2822 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2824 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2826 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2828 * v850-dis.c (disassemble): Make static. Provide prototype.
2830 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2832 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2835 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2837 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2838 ']' characters into the output stream.
2839 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2840 Add "memop" field to all opcodes (for the disassembler).
2841 Reorder opcodes so that "nop" comes before "mov" and "jr"
2842 comes before "jarl".
2844 * v850-dis.c (print_insn_v850): Fix typo in last change.
2846 * v850-dis.c (print_insn_v850): Properly handle disassembling
2847 a two byte insn at the end of a memory region when the memory
2848 region's size is only two byte aligned.
2850 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2852 * v850-dis.c (v850_reg_names): Define.
2853 (v850_sreg_names, v850_cc_names): Likewise.
2854 (disassemble): Very rough cut at printing operands (unformatted).
2856 * v850-opc.c (BOP_MASK): Fix.
2857 (v850_opcodes): Fix mask for jarl and jr.
2859 * v850-dis.c: New file. Skeleton for disassembler support.
2860 * Makefile.in Remove v850 references, they're not needed here.
2861 * configure.in: Add v850-dis.o when building v850 toolchains.
2862 * configure: Rebuilt.
2863 * disassemble.c (disassembler): Call v850 disassembler.
2865 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2866 (insert_d8_6, extract_d8_6): New functions.
2867 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2868 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2870 (IF4A, IF4B): Use "D7" instead of "D7S".
2871 (IF4C, IF4D): Use "D8_7" instead of "D8".
2872 (IF4E, IF4F): New. Use "D8_6".
2873 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2874 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2876 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2877 (v850_operands): Change D16 to D16_15, use special insert/extract
2878 routines. New new D16 that uses the generic insert/extract code.
2879 (IF7A, IF7B): Use D16_15.
2880 (IF7C, IF7D): New. Use D16.
2881 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2883 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2884 message. Issue an error if the branch offset is odd.
2886 * v850-opc.c: Add notes about needing special insert/extract
2887 for all the load/store insns, except "ld.b" and "st.b".
2889 * v850-opc.c (insert_d22, extract_d22): New functions.
2890 (v850_operands): Use insert_d22 and extract_d22 for
2892 (insert_d9): Fix range check.
2894 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2896 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2897 and set bits field to D9 and D22 operands.
2899 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2901 * v850-opc.c (v850_operands): Define SR2 operand.
2902 (v850_opcodes): "ldsr" uses R1,SR2.
2904 * v850-opc.c (v850_opcodes): Fix opcode specs for
2905 sld.w, sst.b, sst.h, sst.w, and nop.
2907 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2909 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2910 end of the opcode table.
2912 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2914 * d10v-opc.c (pre_defined_registers): Added register pairs,
2915 "r0-r1", "r2-r3", etc.
2917 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2919 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2920 Create I16U for an unsigned 16bit mmediate operand.
2921 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2923 * v850-opc.c (v850_operands): Define EP operand.
2924 (IF4A, IF4B, IF4C, IF4D): Use EP.
2926 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2927 with immediate operand, "movhi". Tweak "ldsr".
2929 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2930 correct. Get sld.[bhw] and sst.[bhw] closer.
2932 * v850-opc.c (v850_operands): "not" is a two byte insn
2934 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2936 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2938 * v850-opc.c (two): Get order of words correct.
2940 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2942 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2943 register source and destination operands.
2944 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2946 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2947 same thinko in "trap" opcode.
2949 * v850-opc.c (v850_opcodes): Add initializer for size field
2952 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2953 Add D8 for 8-bit unsigned field in short load/store insns.
2954 (IF4A, IF4D): These both need two registers.
2955 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2956 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2957 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2958 for "ldsr" and "stsr".
2959 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2962 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2963 short store word (sst.w).
2965 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2967 * v850-opc.c (v850_operands): Added insert and extract fields,
2968 pointers to functions that handle unusual operand encodings.
2970 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2972 * v850-opc.c (v850_opcodes): Enable "trap".
2974 * v850-opc.c (v850_opcodes): Fix order of displacement
2975 and register for "set1", "clr1", "not1", and "tst1".
2977 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2979 * v850-opc.c (v850_operands): Add "B3" support.
2980 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2983 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2985 * v850-opc.c: Close unterminated comment.
2987 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2989 * v850-opc.c (v850_operands): Add flags field.
2990 (v850_opcodes): add move opcodes.
2992 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2994 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2995 * configure: (bfd_v850v_arch) Add new case.
2996 * configure.in: (bfd_v850_arch) Add new case.
2997 * v850-opc.c: New file.
2999 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3001 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3003 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3005 * d10v-opc.c: Add additional information to the opcode
3006 table to help determinine which instructions can be done
3009 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3011 * mpw-make.sed: Update editing of include pathnames to be
3014 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3016 * arm-opc.h: Added "bx" instruction definition.
3018 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3020 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3022 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3024 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3026 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3028 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3030 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3032 * makefile.vms: Update for alpha-opc changes.
3034 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3036 * i386-dis.c (print_insn_i386): Actually return the correct value.
3037 (ONE, OP_ONE): #ifdef out; not used.
3039 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3041 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3042 Changed subi operand type to treat 0 as 16.
3044 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3046 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3049 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3051 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3052 memory transfer instructions. Add new format string entries %h and %s.
3053 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3056 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3058 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3059 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3061 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3063 * alpha-dis.c (print_insn_alpha_osf): Remove.
3064 (print_insn_alpha_vms): Remove.
3065 (print_insn_alpha): Make globally visible. Chose the register
3066 names based on info->flavour.
3067 * disassemble.c: Always return print_insn_alpha for the alpha.
3069 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3071 * d10v-dis.c (dis_long): Handle unknown opcodes.
3073 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3075 * d10v-opc.c: Changes to support signed and unsigned numbers.
3076 All instructions with the same name that have long and short forms
3077 now end in ".l" or ".s". Divs added.
3078 * d10v-dis.c: Changes to support signed and unsigned numbers.
3080 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3082 * d10v-dis.c: Change all functions to use info->print_address_func.
3084 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3086 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3087 move ccr/sr insns more strict so that the disassembler only
3088 selects them when the addressing mode is data register.
3090 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3091 * d10v-opc.c (pre_defined_registers): Declare.
3092 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3093 to pick a better name for the registers.
3095 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3097 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3098 operands for fexpand and fpmerge. From Christian Kuehnke
3099 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3101 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3103 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3104 print routine. Take new regnames and cpumask arguments.
3105 Kill the environment variable nonsense.
3106 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3107 (print_insn_alpha_vms): New function. Do VMS style regnames.
3108 * disassemble.c (disassembler): Test bfd flavour to pick
3109 between OSF and VMS routines. Default to OSF.
3111 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3113 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3114 * configure: Rebuild.
3115 * Makefile.in (install): Use @INSTALL_SHLIB@.
3117 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3119 * configure: (bfd_d10v_arch) Add new case.
3120 * configure.in: (bfd_d10v_arch) Add new case.
3121 * d10v-dis.c: New file.
3122 * d10v-opc.c: New file.
3123 * disassemble.c (disassembler) Add entry for d10v.
3125 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3127 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3128 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3130 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3132 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3133 distinguish between variants of the instruction set.
3134 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3135 distinguish between variants of the instruction set.
3137 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3139 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3140 the 8086 instruction set.
3141 * i386-dis.c: General cleanups. Make most things static. Add
3142 prototypes. Get rid of static variables aflags and dflags. Pass
3143 them as args (to almost everything).
3145 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3147 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3149 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3151 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3152 if the next arg is marked with SRC_IN_DST. Gross.
3154 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3155 we're looking for and find EXR.
3157 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3158 if we're looking for KBIT and we don't find it.
3160 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3163 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3164 3bit immediate operands.
3166 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3168 * Released binutils 2.7.
3170 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3171 <kkaempf@progis.ac-net.de>.
3173 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3175 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3177 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3179 * sparc-dis.c (print_insn_sparclite): New routine to print
3180 sparclite instructions.
3182 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3184 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3186 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3188 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3189 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3190 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3192 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3194 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3195 Use autoconf-set values.
3196 (docdir, oldincludedir): Removed.
3197 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3199 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3201 * alpha-opc.c: New file.
3202 * alpha-opc.h: Remove.
3203 * alpha-dis.c: Complete rewrite to use new opcode table.
3204 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3205 * configure: Rebuild with autoconf 2.10.
3206 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3207 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3209 (alpha-opc.o): New target.
3211 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3213 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3214 Set imm_added_to_rs1 even if the source and destination register
3217 * sparc-opc.c: Add some two operand forms of the wr instruction.
3219 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3221 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3224 * disassemble.c (disassembler): Handle H8/S.
3225 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3227 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3229 * sparc-opc.c: Add beq/teq as aliases for be/te.
3231 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3232 <sergei@msil.sps.mot.com>.
3234 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3236 * makefile.vms: New file.
3238 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3240 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3242 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3245 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3247 * i386-dis.c (OP_OFF): Call append_prefix.
3249 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3251 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3252 unsigned long to silence a warning from the Solaris PowerPC
3255 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3257 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3259 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3261 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3263 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3264 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3265 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3266 cpush, cpusha, cpull sparclet insns.
3268 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3270 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3272 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3274 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3275 Set F_FLOAT on other floating point instructions.
3277 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3279 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3281 (powerpc_opcodes): Add 860/821 specific SPRs.
3283 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3285 * configure.in: Permit --enable-shared to specify a list of
3286 directories. Set and substitute BFD_PICLIST.
3287 * configure: Rebuild.
3288 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3289 uses. Set to @BFD_PICLIST@.
3291 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3293 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3294 not "abs", which may be needed for the absolute in something
3295 like btst #0,@10:8. Print L_3 immediates separately from other
3296 immediates. Change ABSMOV reference to ABS8MEM.
3298 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3300 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3301 (current_arch_mask): New static global.
3302 (compute_arch_mask): New static function.
3303 (print_insn_sparc): Delete sparc_v9_p. New static local
3304 current_mach. Resort opcode table if current_mach changes.
3305 Generalize "insn not supported" test.
3306 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3307 Delete test for v9/!v9.
3308 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3310 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3311 (brfcx): Renamed to FBRX.
3312 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3313 coprocessor mnemonics are not supported on the sparclet).
3314 (condf): Renamed to CONDF.
3315 (SLCBCC2): Delete F_ALIAS flag.
3317 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3319 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3320 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3322 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3324 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3325 that the shared library version number is set correctly.
3327 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3329 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3330 Miles Bader <miles@gnu.ai.mit.edu>.
3331 * configure: Rebuild.
3333 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3335 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3338 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3340 * configure: Rebuild with autoconf 2.8.
3342 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3344 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3345 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3347 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3349 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3350 since they appear as targets in Makefile.in.
3351 * configure: Rebuild.
3353 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3355 * mpw-make.sed: Edit out shared library support bits.
3357 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3359 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3360 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3361 (sparc_opcodes): Add sparclet insns.
3362 (sparclet_cpreg_table): New static local.
3363 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3364 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3366 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3368 * i386-dis.c (index16): New static variable.
3369 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3371 (OP_indirE): Return result of OP_E.
3372 (OP_E): Check for 16 bit addressing mode, and disassemble
3373 correctly. Optimised 32 bit case a little. Don't print
3374 "(base,index,scale)" when sib specifies only an offset.
3376 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3378 * configure.in: Set and substitute SHLIB_DEP.
3379 * configure: Rebuild.
3380 * Makefile.in (SHLIB_DEP): New variable.
3381 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3382 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3383 COMMON_SHLIB, add them to piclist with appropriate modifications.
3384 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3385 here: just use piclist.
3387 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3389 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3390 (print_insn_sparc): Rewrite v9/not-v9 tests.
3391 (compare_opcodes): Likewise.
3392 * sparc-opc.c (MASK_<ARCH>): Define.
3393 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3394 (sparclet,v6notv9): Define.
3395 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3396 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3398 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3400 * configure.in: Call AC_PROG_CC before configure.host.
3401 * configure: Rebuild.
3403 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3405 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3407 * i386-dis.c (onebyte_has_modrm): New static array.
3408 (twobyte_has_modrm): New static array.
3409 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3411 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3413 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3416 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3418 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3421 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3423 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3424 m68010up, not just m68020up | cpu32.
3426 * Makefile.in (SONAME): New variable.
3427 ($(SHLINK)): Make a link to the transformed name, as well.
3428 (stamp-tshlink): New target.
3429 (install): Skip stamp-tshlink during install.
3431 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3433 * configure.in: Call AC_ARG_PROGRAM.
3434 * configure: Rebuild.
3435 * Makefile.in (program_transform_name): New variable.
3436 (install): Transform library name before installing it.
3438 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3440 * i960-dis.c (mem): Add HX dcinva instruction.
3442 Support for building as a shared library, based on patches from
3443 Alan Modra <alan@spri.levels.unisa.edu.au>:
3444 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3445 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3446 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3447 * configure: Rebuild.
3448 * Makefile.in (ALLLIBS): New variable.
3449 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3450 (COMMON_SHLIB, SHLINK): New variables.
3451 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3452 (STAGESTUFF): Remove variable.
3453 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3454 (stamp-piclist, piclist): New targets.
3455 ($(SHLIB), $(SHLINK)): New targets.
3456 ($(OFILES)): Depend upon stamp-picdir.
3457 (disassemble.o): Build twice if PICFLAG is set.
3458 (MOSTLYCLEAN): Add pic/*.o.
3459 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3460 (distclean): Remove pic and stamp-picdir.
3461 (install): Install shared libraries.
3462 (stamp-picdir): New target.
3464 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3466 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3467 Print unknown instruction as "unknown", rather than in hex.
3469 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3471 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3473 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3475 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3477 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3479 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3480 when necessary. From Ulrich Drepper
3481 <drepper@myware.rz.uni-karlsruhe.de>.
3483 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3485 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3486 sparc_num_opcodes. Update architecture enum values.
3487 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3488 (sparc_opcode_lookup_arch): New function.
3489 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3490 (sparc_opcodes): Add v9a shutdown insn.
3492 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3494 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3495 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3497 (print_insn_sparc64): Deleted.
3498 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3501 * sparc-opc.c (architecture_pname): Add v9a.
3503 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3505 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3506 incorrectly defined as 0x16 when it should be 0x15.
3507 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3508 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3509 excb (exception barrier) which is defined in the Alpha
3510 Architecture Handbook version 2.
3511 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3512 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3513 disassembled as or, for example.
3515 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3518 (_print_insn_mips): Change i from int to unsigned int.
3520 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3522 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3523 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3525 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3527 * i386-dis.c: Added Pentium Pro instructions.
3529 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3531 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3534 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3536 * sh-opc.h (sh_nibble_type): Added REG_B.
3537 (sh_arg_type): Added A_REG_B.
3538 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3540 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3542 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3544 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3546 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3548 * Makefile.in (distclean): Remove stamp-h. From Ronald
3549 F. Guilmette <rfg@monkeys.com>.
3551 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3553 From David Mosberger-Tang <davidm@azstarnet.com>:
3554 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3557 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3559 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3560 (sh_table): Added many SH3 opcodes.
3561 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3563 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3565 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3566 (subco,subco.): Mark this PPC, not PPCCOM.
3568 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3570 * configure: Rebuild with autoconf 2.7.
3572 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3574 * configure: Rebuild with autoconf 2.6.
3576 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3578 * configure.in: Sort list of architectures. Accept but do nothing
3579 for alliant, convex, pyramid, romp, and tahoe.
3581 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3583 * a29k-dis.c (print_special): Change num to unsigned int.
3585 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3587 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3590 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3592 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3593 * configure: Rebuilt.
3595 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3597 * configure.in: Add case for bfd_i860_arch.
3598 * configure: Rebuild.
3600 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3602 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3603 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3604 (NEXTDOUBLE): Likewise.
3605 (print_insn_m68k): Don't match fmoveml if there is more than one
3606 register in the list.
3607 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3609 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3611 * m68k-opc.c: Use #W rather than #w.
3612 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3614 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3616 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3617 and likewise for all the dbxx opcodes.
3619 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3621 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3623 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3625 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3626 the VR4100 specific instructions to the mips_opcodes structure.
3628 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3630 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3631 ugly Metrowerks bug in CW6, is fixed in CW7.
3633 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3635 * ppc-opc.c (whole file): Add flags for common/any support.
3637 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3639 * Makefile.in (BISON): Remove macro.
3640 (FLAGS_TO_PASS): Remove BISON.
3642 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3644 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3646 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3647 instructions that take no args by looking at the match mask.
3648 (print_insn_arg): Always print "%" before register names.
3649 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3650 [case '_']: Don't print "@#" before address.
3651 [case 'J']: Use "%s" as format string, not register name.
3652 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3654 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3656 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3659 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3661 From David Mosberger-Tang <davidm@azstarnet.com>
3663 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3664 (alpha_insn_set): added definitions for VAX floating point
3665 instructions (Unix compilers don't generate these, but handcoded
3666 assembly might still use them).
3668 * alpha-dis.c (print_insn_alpha): added support for disassembling
3669 the miscellaneous instructions in the Alpha instruction set.
3671 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3673 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3674 no longer create sysdep.h, sed ppc-opc.c to work around a
3675 serious Metrowerks C bug.
3676 * mpw-make.in: Remove.
3677 * mpw-make.sed: New file, used by mpw-configure to edit
3678 Makefile.in into an MPW makefile.
3680 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3682 * Makefile.in (maintainer-clean): New synonym for realclean.
3684 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3686 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3687 which use '0', '1', and '2' instead. Specify the proper size for
3688 a pmove immediate operand. Correct the pmovefd patterns to be
3689 moves to a register, not from a register.
3690 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3692 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3694 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3695 %psr, %wim, %tbr as F_NOTV9.
3697 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3699 * Makefile.in (Makefile): Just rebuild Makefile when running
3701 (config.h, stamp-h): New targets.
3702 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3703 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3704 rebuilding config.h.
3705 * configure: Rebuild.
3707 * mips-opc.c: Change unaligned loads and stores with "t,A"
3708 operands to use "t,A(b)".
3710 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3712 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3714 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3716 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3717 until 3 instead of until 2.
3719 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3721 * Makefile.in (ALL_CFLAGS): Define.
3722 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3723 (MOSTLYCLEAN): Add config.log.
3724 (distclean): Don't remove config.log.
3725 * configure.in: Substitute HDEFINES.
3726 * configure: Rebuild.
3728 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3730 * sh-opc.h (sh_arg_type): Add F_FR0.
3731 (sh_table, case fmac): Add F_FR0 as first argument.
3733 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3735 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3737 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3739 * sparc-dis.c: Remove all references to NO_V9.
3741 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3743 * aclocal.m4: Just include ../bfd/aclocal.m4.
3744 * configure: Rebuild.
3746 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3748 * sparc-dis.c (X_DISP19): Define.
3749 (print_insn, case 'G'): Use it.
3750 (print_insn, case 'L'): Sign extend displacement.
3752 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3754 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3755 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3756 host_makefile_frag or frags.
3757 * aclocal.m4: New file.
3758 * configure: Rebuild.
3759 * Makefile.in (INSTALL): Set to @INSTALL@.
3760 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3761 (INSTALL_DATA): Set to @INSTALL_DATA@.
3763 (AR_FLAGS): Set to rc rather than qc.
3764 (CC): Define as @CC@.
3765 (CFLAGS): Set to @CFLAGS@.
3766 (@host_makefile_frag@): Remove.
3767 (config.status): Remove dependency upon @frags@.
3769 * configure.in: ../bfd/config.bfd now just sets shell variables.
3770 Use them rather than looking through target Makefile fragments.
3771 * configure: Rebuild.
3773 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3775 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3777 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3779 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3780 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3783 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3784 (lookup_{name,value}): New functions.
3785 (prefetch_table): New static local.
3786 (sparc_{encode,decode}_prefetch): New functions.
3787 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3789 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3791 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3794 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3796 * sh-dis.c: Correct comment on first line of file.
3798 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3800 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3802 * sparc-opc.c (asi, membar): New static locals.
3803 (sparc_{encode,decode}_{asi,membar}): New functions.
3804 (sparc_opcodes, membar insn): Fix.
3805 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3806 Support decoding of membar masks.
3809 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3811 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3813 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3815 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3816 and likewise for the other branches. Add bhs as an alias for bcc,
3817 and likewise for the size variants. Add dbhs as an alias for
3820 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3822 * sh-opc.h (FP sts instructions): Update to match reality.
3824 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3826 * m68k-dis.c: (fpcr_names): Add % before all register names.
3827 (reg_names): Likewise.
3828 (print_insn_arg): Don't explicitly print % before register names.
3829 Add % before register names in static array names. In case 'r',
3830 print data registers as `@(Dn)', not `Dn@'. When printing a
3831 memory address, don't print @# before it.
3832 (print_indexed): Change base_disp and outer_disp from int to
3833 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3834 syntax. Sign extend 8 byte displacement correctly.
3835 (print_base): Print using MIT syntax. Print zpc when appropriate.
3836 Change parameter disp from int to bfd_vma.
3838 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3841 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3843 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3844 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3845 * sh-opc.h (sh_arg_type): Add new operand types.
3846 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3848 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3850 * Makefile.in (distclean): Remove generated file config.h.
3852 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3854 * Makefile.in (distclean): Remove generated file config.h.
3856 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3858 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3860 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3862 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3863 rather than numopcodes. Use m68k_opcodes rather than removed
3864 opcode function. Don't check F_ALIAS.
3865 (print_insn_arg): Change first parameter to be const char *.
3866 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3867 (m68k-opc.o): New target.
3868 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3869 * configure: Rebuild.
3871 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3873 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3874 (opcode_bits, opcode_hash_table): New variables.
3875 (opcodes_initialized): Renamed from opcodes_sorted.
3876 (build_hash_table): New function.
3877 (is_delayed_branch): Use hash table.
3878 (print_insn): Renamed from print_insn_sparc, made static.
3879 Build and use hash table. If !sparc64, ignore sparc64 insns,
3880 and vice-versa if sparc64.
3881 (print_insn_sparc, print_insn_sparc64): New functions.
3882 (compare_opcodes): Move sparc64 opcodes to end.
3883 Print commutative insns with constant second.
3884 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3886 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3888 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3889 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3890 avoids printing a delay slot in a delay slot.
3891 * sh-opc.h (sh_table): Fully bracket last entry.
3893 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3895 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3897 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3899 * configure.in: Get host_makefile_frag from ${srcdir}.
3901 * configure.in: Autoconfiscated. Check for string[s].h. Create
3902 config.h from config.in. Don't set up sysdep.h link.
3903 * sysdep.h: New file.
3904 * configure, config.in: New files, generated from configure.in.
3905 * Makefile.in: Updated to be processed autoconf-style.
3906 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3907 (Makefile): Depend on config.status.
3908 (config.status): New rule.
3909 * configure.bat: Update Makefile substitutions.
3911 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3913 * mips-opc.c (L1): Define.
3914 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3915 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3918 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3920 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3921 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3922 have multiple add units but only a single logical unit.
3924 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3925 shifted by 18, without any insertion or extraction function.
3926 (insert_cr, extract_cr): Remove.
3928 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3930 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3933 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3935 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3936 * sh-opc.h: Add copyright.
3938 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3940 * Makefile.in (crunch-m68k): Delete extra target accidentally
3941 checked in a while ago.
3943 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3945 * sh-opc.h (sh_table): Add SH3 support.
3947 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3949 * sh-opc.h: Added bsrf and braf.
3951 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3953 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3954 bogus [ls]fm{ea,fd} patterns.
3956 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3957 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3958 initialize it from memory. Make function static.
3959 (print_insn_{big,little}_arm): New functions.
3960 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3961 the correct endianness.
3963 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3965 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3968 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3970 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3971 17th, so that it builds again using GCC as the compiler.
3973 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3975 * mips-dis.c (print_insn_little_mips): Cast return value from
3976 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3977 expects an unsigned long, and that might be fewer words of
3978 argument storage (e.g., if bfd_vma is long long on a 32-bit
3980 (print_insn_big_mips): Likewise with bfd_getb32 value.
3981 (_print_insn_mips): Now static.
3983 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3985 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3986 gcc memory hog problem with initializer is fixed.
3988 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3990 Merge in support for Mac MPW as a host.
3991 (Old change descriptions retained for informational value.)
3993 * mpw-config.in (archname): Compute from the config.
3994 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3996 * mpw-config.in (target_arch): Compute from canonical target.
3997 (m68k, mips, powerpc, sparc): Add architectures.
3998 * mpw-make.in (disassemble.c.o): Add.
3999 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4001 * mpw-config.in (BFD_MACHINES): Set to a default value.
4002 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4004 * mpw-make.in (CSEARCH): Add extra-include to search path.
4006 * mpw-config.in (varargs.h): Don't create.
4007 (sysdep.h): Create using forward-include.
4008 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4010 * mpw-config.in: New file, MPW version of configure.in.
4011 * mpw-make.in: New file, MPW version of Makefile.in.
4013 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4015 * alpha-dis.c (print_insn_alpha): Put empty statement after
4018 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4020 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4021 (low_sign_extend): Likewise.
4022 (get_field): Delete unused function.
4023 (set_field, deposit_14, deposit_21): Likewise.
4025 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4027 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4030 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4032 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4034 * alpha-opc.h (OSF_ASMCODE): define
4035 print pal-code names as defined in App C of the
4036 Alpha Architecture Reference Manual
4038 * alpha-dis.c: cleaned up output
4039 print stylized code forms as defined in App A.4.3 of the
4040 Alpha Architecture Reference Manual
4042 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4046 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4049 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4051 * m68k-dis.c (opcode): New function. Returns address of opcode
4052 table entry given index, even if the opcode table was split to
4053 work around gcc bugs.
4054 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4056 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4057 (reg_names): Now const.
4058 (print_insn_arg): Arrays cacheFieldName and names now const.
4059 (print_indexed): Array scales now const.
4061 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4063 * ppc-opc.c: Sort recently added instructions by minor opcode
4064 number within major opcode number.
4066 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4068 * hppa-dis.c: Include libhppa.h.
4070 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4072 * mips-opc.c: Change dli to use M_DLI, and add dla.
4074 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4076 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4078 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4080 * mips-opc.c: Add r4650 mul instruction.
4082 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4084 * mips-opc.c: Add uld and usd macros for unaligned double load and
4087 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4089 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4090 mfdcr, mtdcr, icbt, iccci.
4092 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4094 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4095 signed char fields to shorts, more portable.
4097 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4099 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4100 char fields as signed chars, since they may have negative values.
4102 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4104 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4105 (mycroft@netbsd.org).
4107 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4109 From "Logg, Ed" <elogg@ea.com>:
4110 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4111 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4114 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4116 * ppc-opc.c: Changes based on patch from David Edelsohn
4117 <edelsohn@mhpcc.edu>.
4118 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4121 (insert_tbr): New static function.
4122 (extract_tbr): New static function.
4123 (XFXFXM_MASK, XFXM): Define.
4124 (XSPRBAT_MASK, XSPRG_MASK): Define.
4125 (powerpc_opcodes): Add instructions to access special registers by
4126 name. Add mtcr and mftbu.
4128 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4130 * mips-opc.c (P3): Define.
4131 (mips_opcodes): Add mad and madu.
4133 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4135 * configure.in: Add W65 support.
4136 * disassemble.c: Likewise.
4137 * w65-opc.h, w65-dis.c: New files.
4139 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4141 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4144 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4146 * mips-opc.c: Add dli as a synonym for li.
4148 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4150 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4151 print something for reserved opcode values, even if it won't
4154 * mips-dis.c (_print_insn_mips): When initializing, shift right
4155 and mask, to avoid sign extension problems on the Alpha.
4157 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4160 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4162 * sh-opc.h (mov.l gbr): Get direction right.
4163 * sh-dis.c (print_insn_shx): New function.
4164 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4165 print opcodes with right byte order.
4167 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4169 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4170 to avoid conflicts with getopt.
4172 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4174 * hppa-dis.c (print_insn_hppa): Read the instruction using
4175 bfd_getb32, so that it works on a little endian or 64 bit host.
4176 Remove unused local variable op.
4178 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4180 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4181 addu does not work correctly if -mips3.
4183 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4185 * a29k-dis.c (print_special): Add special register names defined
4186 on 29030, 29040 and 29050.
4187 (print_insn): Handle new operand type 'I'.
4189 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4191 * Makefile.in (INSTALL): Use top level install.sh script.
4193 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4195 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4196 that it works on a little endian host.
4198 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4200 * configure.in: Use ${config_shell} when running config.bfd.
4202 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4204 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4206 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4208 * a29k-dis.c (print_insn): Print the opcode.
4210 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4212 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4214 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4216 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4218 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4220 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4221 which store a value into memory.
4223 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4225 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4226 * arm-dis.c, arm-opc.h: New files.
4228 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4230 * Makefile.in (ns32k-dis.o): Add dependency.
4231 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4232 string, not as array of chars.
4234 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4236 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4238 * sparc-opc.c: Added sparclite extended FP operations, and
4239 versions of v9 impdep* instructions permitting specification of
4242 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4244 * i960-dis.c (reg_names): Now const.
4245 (struct sparse_tabent): New type, copied from array type in mem
4247 (ctrl): Local static array ctrl_tab now const.
4248 (cobr): Local static array cobr_tab now const.
4249 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4250 static variable mem_tab no longer explicitly initialized. Changed
4251 mem_init to const array of struct sparse_tabent.
4252 (reg): Local static variable reg_tab no longer explicitly
4253 initialized. Changed reg_init to const array of struct
4255 (ea): Local static array scale_tab now const.
4257 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4260 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4262 * configure.bat: the disassember needs to be enabled for
4263 "objdump -d" to work in djgpp.
4265 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4267 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4268 (invalid_float): Enabled general version, doesn't require running
4269 on ns32k host. Changed to take char* argument, and test for
4270 explicitly specified sizes, instead of using sizeof() on host CPU
4272 (INVALID_FLOAT): Cast first argument.
4273 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4274 list_P032, list_M032): Now const.
4275 (optlist, list_search): Made appropriate arguments now point to
4277 (print_insn_arg): Changed static array of one-character-string
4278 pointers into a static const array of characters; fixed sprintf
4279 statement accordingly.
4281 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4283 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4284 from distribution. A ns32k-dis.c from a previous distribution has
4285 been brought up to date and supports the new interface.
4287 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4289 * configure.in: add bfd_ns32k_arch target support.
4291 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4292 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4294 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4296 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4299 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4301 * h8300-dis.c, mips-dis.c: Don't use true and false.
4303 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4305 * configure.in: Change --with-targets to --enable-targets.
4307 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4309 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4310 opcodes to the first instruction with that opcode, to speed
4311 disassembly of large files. From ralphc@pyramid.com (Ralph
4314 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4316 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4318 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4320 * configure.bat: update to latest makefile.in
4322 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4324 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4325 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4326 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4327 slot insn is in a delay slot.
4328 * z8k-opc.h: (resflg): Fix patterns.
4329 * h8500-opc.h Fix CR insn patterns.
4331 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4333 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4334 "cmpl" before POWER versions, so that gas -many uses them.
4336 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4338 * disassemble.c: New file.
4339 * Makefile.in (OFILES): Add disassemble.o.
4340 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4341 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4342 binutils/configure.in.
4344 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4345 opcode being examined.
4347 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4349 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4350 (insert_ral, insert_ram, insert_ras): New functions.
4351 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4352 RAS for store with update.
4354 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4356 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4357 (edelsohn@npac.syr.edu).
4359 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4361 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4364 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4366 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4368 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4370 * ppc-opc.c (powerpc_operands): The signedp field has been
4371 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4372 instead. Add new operand SISIGNOPT.
4373 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4374 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4375 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4378 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4380 * i386-dis.c (struct private): Renamed to dis_private. `private'
4381 is a reserved word for dynix cc.
4383 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4385 * configure.in: Change error message to refer to bfd/config.bfd
4386 rather than bfd/configure.in.
4388 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4390 * ppc-opc.c: Define POWER2 as short alias flag.
4391 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4394 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4396 * i960-dis.c (print_insn_i960): Don't read a second word for
4397 opcodes 0, 1, 2 and 3.
4399 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4401 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4403 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4405 * m68881-ext.c: Removed; no longer used.
4406 * Makefile.in: Changed accordingly.
4408 * m68k-dis.c (ext_format_68881): Don't declare.
4409 (print_insn_m68k): If an instruction uses place 'i', it uses at
4410 least four fixed bytes.
4411 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4412 extended float, convert to double using floatformat_to_double, not
4413 ieee_extended_to_double, and fetch the data before converting it.
4415 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4417 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4418 davidj@ICSI.Berkeley.EDU (David Johnson).
4420 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4422 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4423 PowerPC uses bdnz[l][a].
4425 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4427 * dis-buf.c, i386-dis.c: Include sysdep.h.
4429 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4431 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4433 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4434 by Motorola PowerPC 601 with PPC_OPCODE_601.
4435 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4436 Disassemble Motorola PowerPC 601 instructions as well as normal
4437 PowerPC instructions.
4439 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4441 * i960-dis.c (reg, mem): Just use a static array instead of
4444 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4446 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4447 condition name index if this is for a negated condition.
4449 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4450 Floating point format for 'H' operand is backwards from normal
4451 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4452 operands (fmpyadd and fmpysub), handle bizarre register
4453 translation correctly for single precision format.
4455 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4456 or 'I' operands if the next format specifier is 'M' (fcmp
4457 condition completer).
4459 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4461 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4462 single number giving a bitmask for the MB and ME fields of an M
4463 form instruction. Change NB to accept 32, and turn it into 0;
4464 also turn 0 into 32 when disassembling. Seperated SH from NB.
4465 (insert_mbe, extract_mbe): New functions.
4466 (insert_nb, extract_nb): New functions.
4467 (SC_MASK): Mask out SA and LK bits.
4468 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4469 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4470 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4471 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4472 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4473 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4474 (powerpc_macros): Define table of macro definitions.
4475 (powerpc_num_macros): Define.
4477 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4478 if PPC_OPERAND_NEXT is set.
4480 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4482 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4483 char. Retrieve contents using bfd_getl32 instead of shifting.
4485 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4487 * ppc-opc.c: New file. Opcode table for PowerPC, including
4488 opcodes for POWER (RS/6000).
4489 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4490 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4491 (CFILES): Add ppc-dis.c.
4492 (ppc-dis.o, ppc-opc.o): New targets.
4493 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4495 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4497 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4498 No space before 'u', 'f', or 'N'.
4500 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4502 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4503 farther than we should.
4505 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4507 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4509 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4511 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4513 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4514 needs it, to prevent reading past the end of a section.
4516 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4518 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4519 Removed t,A case for la; always use t,A(b) case.
4521 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4523 From Ted Lemen <mellon@pepper.ncd.com>
4524 * mips-dis.c (print_insn_arg): Handle 'k'.
4525 * mips-opc.c: Make cache use k, not t.
4527 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4529 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4530 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4531 FLOAT_FORMAT_CODE to put out floating point register names.
4533 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4535 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4537 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4539 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4541 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4543 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4544 larger than 32. Moved dsxx32 variants first for disassembler.
4546 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4548 * z8kgen.c, z8k-opc.h: Add full lda information.
4550 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4552 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4553 movb instructions. Any necessary space will be emitted by
4554 the code to handle nullification completers.
4556 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4558 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4560 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4562 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4563 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4565 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4569 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4571 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4572 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4574 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4576 * m88k-dis.c (m88kdis): comment change. Remove space after
4578 (printop): handle new arg types DEC and XREG for m88110.
4580 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4582 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4583 type for absolute branch addresses. Delete special
4584 "ble" and "be" code in 'W' operand code.
4586 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4588 * mips-opc.c: Set hazard information correctly for branch
4589 likely instructions.
4591 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4593 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4594 info->fprintf_func for printing and info->print_address_func for
4597 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4599 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4601 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4603 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4604 Corrected second case of "b" for disassembler.
4606 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4609 to BFD swapping routines to correspond to BFD name changes.
4611 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * mips-opc.c: Change div machine instruction to be z,s,t rather
4614 than s,t. Change div macro to be d,v,t rather than d,s,t.
4615 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4616 rem and remu which generates only the corresponding div
4617 instruction. This is for compatibility with the MIPS assembler,
4618 which only generates the simple machine instruction when an
4619 explicit destination of $0 is used.
4620 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4622 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4625 WR_31 hazard for bal, bgezal, bltzal.
4627 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4629 * hppa-dis.c (print_insn_hppa): Use print function
4630 from within the disassemble_info, not fprintf_filtered.
4632 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4634 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4635 Law, law@cs.utah.edu.)
4637 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4639 * mips-opc.c ("absu"): Removed.
4642 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4644 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4645 Changed hazard information to distinguish between memory load
4646 delays and coprocessor load delays.
4648 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4650 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4652 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4654 * configure.in: Don't pass cpu to config.bfd.
4656 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4658 * m88k-dis.c (m88kdis): Make class unsigned.
4660 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4662 * alpha-dis.c (print_insn_alpha): One branch format case was
4663 missing the instruction name.
4665 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4667 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4668 Add the arch-specific auxiliary files.
4669 (OFILES): Remove the arch-specific auxiliary files
4670 and use BFD_MACHINES instead of DIS_LIBS.
4671 * configure.in: Set BFD_MACHINES based on --with-targets option.
4673 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4675 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4678 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4680 * sparc-opc.c: Change CONST to const to deal with gcc
4681 -Dconst=__const -traditional.
4683 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4685 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4686 coprocessor instructions out of #if 0, and made them use new
4689 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4691 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4693 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4695 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4696 instruction, for use by the disassembler.
4698 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4699 hand-coded sign extensions that depended on 32-bit host ints.
4700 FIXME, we still depend on big-endian host bitfield ordering.
4701 (sparc_print_insn): Set the insn_info_valid field, and the
4702 other fields that describe the instruction being printed.
4704 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4706 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4707 `jmp' instead of just one of them.
4709 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4711 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4712 (fput_fp_reg_r): Renamed from fput_reg_r.
4713 (fput_fp_reg): New function.
4714 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4716 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4718 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4720 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4722 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4724 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4725 don't output a space.
4727 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4729 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4731 * mips-opc.c: New file, containing opcode table from
4732 ../include/opcode/mips.h.
4733 * Makefile.in: Add it.
4735 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4737 * m88k-dis.c: New file, moved in from gdb and changed to use the
4738 new dis-asm.h disassembler interface.
4739 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4740 (m88k-dis.o): New target.
4742 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4744 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4745 argument string const char * to correspond to opcode/mips.h.
4747 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4749 * mips-dis.c: Updated to account for name changes in new version
4751 * Makefile.in: Added header file dependencies.
4753 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4755 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4757 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4759 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4760 extend, rather than shifts.
4762 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4764 * Makefile.in: Undo 15 June change.
4766 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4768 * m68k-dis.c (print_insn_arg): Change return value to byte count
4770 * m68k-dis.c: Re-write to detect invalid operands before
4771 printing anything, so we can handle this the same way we
4772 handle invalid opcodes.
4774 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4776 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4778 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4780 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4783 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4785 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4787 * configure.in: Do make sysdep.h link.
4788 * Makefile.in: Search ../include. Don't search ../bfd.
4790 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4792 Changes from Jeff Law, law@cs.utah.edu:
4793 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4794 Do not print a space before the completers specified by
4797 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4799 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4800 defined, since gdb has been fixed.
4802 Changes from Jeff Law, law@cs.utah.edu:
4803 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4804 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4805 be a *disassemble_info, not a *FILE.
4806 * hppa-dis.c: Support 'd', '!', and 'a'.
4807 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4808 * hppa-dis.c: Delete cases which are no longer needed.
4810 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4812 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4814 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4816 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4819 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4821 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4822 * configure.in: No longer need to configure to get sysdep.h.
4824 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4826 * Patches from Jeffrey Law <law@cs.utah.edu>.
4827 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4828 templates for 1.1 FP computational instructions.
4830 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4832 * h8500-dis.c (print_insn_h8500): Address argument is type
4834 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4837 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4838 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4840 * sparc-dis.c (compare_opcodes): Move static declaration to
4843 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4845 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4846 instruction, remove unimp hack from 'l' argument.
4848 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4850 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4853 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4855 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4856 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4859 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4861 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4862 arrays of string pointers to 2-d arrays of chars, to save
4865 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4867 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4868 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4870 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4872 * hppa-dis.c: New file from Utah, adapted to new disassembler
4874 * Makefile.in: Include it.
4876 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4878 * sh-dis.c, sh-opc.h: New files.
4880 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4882 * alpha-dis.c, alpha-opc.h: New files.
4884 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4886 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4889 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4891 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4893 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4895 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4898 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4900 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4901 and double percent signs a few places.
4903 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4905 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4906 Use info->print_address_func not print_address.
4908 * dis-buf.c (generic_print_address): New function.
4910 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4912 * Makefile.in: Add sparc-dis.c.
4913 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4915 Add `add' instruction to the set that get checked
4916 for a preceding `sethi' in order to print an absolute address.
4917 * (print_insn): Disassembly prefers real instructions.
4918 (is_delayed_branch): Speed up.
4919 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4920 Still missing some float ops, and needs testing.
4921 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4922 F_ALIAS. Use printf, not fprintf, when not passing a file
4924 (compare_opcodes): Check that identical instructions have
4925 identical opcodes, complain otherwise.
4928 * Include reg_names.
4930 Use dis-asm.h/read_memory_func interface.
4932 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4934 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4935 deliberately return non-zero to setjmp from longjmp. Otherwise
4936 this code fails to compile.
4938 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4940 * m68k-dis.c: Fix prototype for fetch_arg().
4942 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4944 * dis-buf.c: New file, for new read_memory_func interface.
4945 Makefile.in (OFILES): Include it.
4946 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4947 Use new read_memory_func interface.
4949 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4951 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4952 * h8500-opc.h: Fix couple of opcodes.
4954 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4956 * Makefile.in: add dvi & installcheck targets
4958 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4960 * Makefile.in: Update for h8500-dis.c.
4962 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4964 * h8500-dis.c, h8500-opc.h: New files
4966 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4968 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4969 ../include/dis-asm.h.
4970 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4971 and ../gdb/m68k-pinsn.c).
4972 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4973 and ../gdb/i386-pinsn.c).
4974 * m68881-ext.c: New file. Moved definition of
4975 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4976 * Makefile.in: Adjust for new files.
4977 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4978 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4979 can be dis-assembled.
4981 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4983 * mips-dis.c (print_insn_arg): Now returns void.
4985 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4987 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4988 files that use the macros.
4990 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4992 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4993 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4994 (CFILES): Added mips-dis.c.
4996 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4998 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4999 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5001 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5003 * Makefile.in: Improve *clean rules.
5004 * configure.in: Allow a default host.
5006 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5008 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5009 files include other sysdep files
5011 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5013 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5015 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5017 * configure.in: For host support, use ../bfd/configure.host
5018 so it stays in sync with the ../bfd/hosts database.
5020 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5022 * configure.in: use cpu-vendor-os triple instead of nested cases
5024 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5026 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5027 *always* the wrong one.
5029 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5031 * z8kgen.c: added copyright info
5033 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5035 * z8k-dis.c (unparse_instr): prettier tabs
5036 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5038 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5040 * configure.in: Add ncr* configuration.
5041 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5042 picayune ANSI compilers happy.
5044 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5046 * configure.in (i386): Make i386 and i486 synonymous for now.
5047 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5049 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5051 * Makefile.in (install): Fix typo.
5053 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5055 * Makefile.in (make): Remove obsolete crud.
5056 (sparc-opc.o): Avoid Sun Make VPATH bug.
5058 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5060 * Makefile.in: since there are no SUBDIRS, remove rule and
5061 references of subdir_do.
5063 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5065 * Makefile.in (install): Get the library name right here too.
5066 Don't install bfd.h, since it's unrelated to this library. No
5067 subdirs to recurse into, either.
5068 (CFILES): The source file has a .c suffix, not .o.
5070 * sparc-opc.c: New file, moved from BFD.
5071 * Makefile.in (OFILES): Build it.
5073 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5075 * z8k-dis.c: fixed forward refferences of some declarations.
5077 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5079 * Makefile.in: get the name of the library right
5081 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5083 * z8k-dis.c: knows how to disassemble z8k stuff
5084 * z8k-opc.h: new file full of z8000 opcodes
5088 version-control: never